4-165-483-11(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ170/DZ171/DZ175
©2010 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
apparatus combination to avoid
injury from tip-over.
and DTS Digital Surround are
registered trademarks and the
DTS logos and Symbol are
trademarks of DTS, Inc. © 1996-
2008 DTS, Inc. All Rights
Reserved.
Precautions
On power sources
• The unit is not disconnected from
the mains as long as it is
connected to the AC outlet, even
if the unit itself has been turned
off.
13) Unplug this apparatus during
lightning storms or when
This system incorporates High-
Definition Multimedia
unused for long periods of time.
14) Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not
operate normally, or has been
dropped.
Interface (HDMITM
technology.
)
• As the main plug is used to
disconnect the unit from the
mains, connect the unit to an
easily accessible AC outlet.
Should you notice an abnormality
in the unit, disconnect the main
plug from the AC outlet
immediately.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registeredtrademarks of HDMI
Licensing LLC.
“DVD-RW,” “DVD-R,”
“DVD+RW,” “DVD+R,”
“DVD VIDEO,” and the “CD”
logos are trademarks.
Copyrights
This product incorporates
copyright protection
For the customers in
Canada
To reduce the risk of fire or electric
shock, do not expose this apparatus
to dripping or splashing, and do not
place objects filled with liquids,
such as vases, on the apparatus.
technology that is protected by
U.S. patents and other
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses only
unless otherwise authorized by
Macrovision. Reverse
“BRAVIA” is a trademark of
Sony Corporation.
“PLAYSTATION” is a
trademark of Sony Computer
Entertainment Inc.
®
ENERGYSTAR
MPEG Layer-3 audio coding
technology and patents
licensed from Fraunhofer IIS
and Thomson.
is a U.S. registered
mark.
engineering or disassembly is
prohibited.
As an ENERGY
®
STAR partner,
Sony Corporation has determined
that this product meets the
ENERGY STAR guidelines for
This system incorporates with
Dolby* Digital and Dolby Pro
Logic (II) adaptive matrix
surround decoder and the
DTS** Digital Surround
System.
iPod is a trademark of Apple
Inc., registered in the U.S. and
other countries.
®
energy efficiency.
“Made for iPod” means that an
electronic accessory has been
designed to connect
* Manufactured under license
from Dolby Laboratories.
Dolby, Pro Logic, and the
double-D symbol are trademarks
of Dolby Laboratories.
specifically to iPod and has
been certified by the developer
to meet Apple performance
standards.
**Manufactured under license
under U.S. Patent #’s:
5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535
& other U.S. and worldwide
patents issued & pending. DTS
Apple is not responsible for the
operation of this device or its
compliance with safety and
regulatory standards.
US
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About MPEG-4 Visual
THIS PRODUCT IS
About These
Operating
Instructions
• The instructions in these
Operating Instructions
describe the controls on the
remote. You can also use the
controls on the unit if they
have the same or similar
names as those on the remote.
• The Control Menu items may
vary depending on the area.
• “DVD” may be used as a
general term for a DVD
VIDEO, DVD+RW/
LICENSED UNDER THE
MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-
COMMERCIAL USE OF A
CONSUMER FOR
DECODING VIDEO IN
COMPLIANCE WITH THE
MPEG-4 VISUAL
STANDARD (“MPEG-4
VIDEO”) THAT WAS
ENCODED BY A
CONSUMER ENGAGED IN
A PERSONAL AND NON-
COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO
PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED
OR SHALL BE IMPLIED
FOR ANY OTHER USE.
ADDITIONAL
DVD+R, and DVD-RW/
DVD-R.
• Measurements are expressed
in feet (ft) for North
American models.
• The default setting is
underlined.
INFORMATION
INCLUDING THAT
RELATING TO
PROMOTIONAL,
INTERNAL AND
COMMERCIAL USES AND
LICENSING MAY BE
OBTAINED FROM MPEG
LA, LLC. SEE HTTP://
WWW.MPEGLA.COM
US
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Playable Discs/Files on a USB
Device...............................................6
Changing the Brightness of the Front
Panel Display.................................. 53
Setting the Demonstration Mode to
On/Off ............................................ 53
Set the System to Standby Mode
Automatically................................. 53
Displaying the Information of a Disc/
USB Device ....................................39
Enjoying the Audio/Video of the
Connected Component ...................40
Using the Control for HDMI Function for
“BRAVIA” Sync ............................47
Transferring Songs onto a USB
Device.............................................49
Adjusting the Delay Between the Picture
and Sound .......................................51
Enjoying Multiplex Broadcast
Sound..............................................52
Changing the Input Level of the Sound
from Connected Components .........52
US
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs/Files on a USB Device
Type
Disc logo
Characteristics
Icon
DVD VIDEO
• DVD VIDEO
• DVD-R/DVD-RW in DVD VIDEO
format or video mode
• DVD+R/DVD+RW in DVD VIDEO
format
VR (Video
Recording) mode
• DVD-R/DVD-RW in VR (Video
Recording) mode (except for DVD-R
DL)
VIDEO CD
• VIDEO CD (Ver. 1.1 and 2.0 discs)
• Super VCD
• CD-R/CD-RW/CD-ROM in video CD
format or Super VCD format
Super Audio CD
• Super Audio CD
CD
• Audio CD
• CD-R/CD-RW in audio CD format
DATA CD
–
• CD-R/CD-RW/CD-ROM in DATA CD
format that contains the following kinds
of files and conforms to ISO 9660
1)
Level 1/Level 2, or Joliet (extended
format).
2)3)
– MP3 files
4)
– JPEG image files
– MPEG4 video files
DATA DVD
–
• DVD-ROM/DVD-R/DVD-RW/
DVD+R/DVD+RW in DATA DVD
format that contains the following kinds
of files and conforms to UDF (Universal
Disk Format).
2)3)
– MP3 files
4)
– JPEG image files
– MPEG4 video files
US
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Type
Disc logo
Characteristics
Icon
USB device
–
• USB device that contains the following
kinds of files.
2)3)
3)
– MP3 files
or WMA/AAC files
4)
– JPEG image files
– MPEG4 video files
1)A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for
Standardization).
2)MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG for compressed audio data. MP3 files
must be in MPEG1 Audio Layer 3 format.
3)Files with copyright protection (Digital Rights Management) cannot be played by the system.
4)JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association
(JEITA).)
Notes on discs
This product is designed to playback discs that conform to the Compact Disc (CD) standard.
DualDiscs and some music discs encoded with copyright protection technologies do not conform to the
Compact Disc (CD) standard, therefore, these discs may not be compatible with this product.
Example of discs that the system cannot play
The system cannot play the following discs:
• CD-ROM/CD-R/CD-RW other than those recorded in the formats listed on page 6
• CD-ROM recorded in PHOTO CD format
• Data part of CD-Extra
• CD Graphics disc
• DVD Audio
• DATA CD/DATA DVD that does not contain MP3 files, JPEG image files, or MPEG4 video files
• DATA CD/DATA DVD that is created in Packet Write format
• DVD-RAM
• Blu-ray Disc
Also, the system cannot play the following discs:
• A DVD VIDEO with a different region code (page 8)
• A disc that has a non-standard shape (e.g., card, heart)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape or a sticker stuck on it
Notes about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW
In some cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW cannot be played on this system
due to the recording quality or physical condition of the disc, or the characteristics of the recording
device and authoring software.
The disc will not play if it has not been correctly finalized. For more information, refer to the operating
instructions for the recording device.
US
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have
been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA
DVDs created in Packet Write format cannot be played.
Notes about Multi Session CD
• This system can play a Multi Session CD when an MP3 file is contained in the first session. Any
subsequent MP3 files recorded in later sessions can also be played.
• This system can play a Multi Session CD when a JPEG image file is contained in the first session.
Any subsequent JPEG image files recorded in later sessions can also be played.
• If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first
session, only the first session will be played.
Region code
Your system has a region code printed on the rear of the unit and will only play a DVD labeled with
the same region code.
A DVD VIDEO labeled
ALL
will also play on this system.
If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will
appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be given even
though playing the DVD VIDEO is prohibited by area restrictions.
Notes about playback operations of a DVD or VIDEO CD
Some playback operations on a DVD or VIDEO CD may be intentionally set by software producers.
Since this system will play a DVD or VIDEO CD according to the disc contents the software producers
designed, some playback features may not be available. Be sure to read the operating instructions of
the DVD or VIDEO CD.
Notes about playable files
• The system can recognize up to 200 folders, including albums (folders) that do not contain audio files,
JPEG image files, or video files. When more than 200 folders are on the DATA CD/DATA DVD/
USB device or more than 150 files are in a folder, folders/files that are recognized by the system differ
depending on the folder configuration.
• The system can play the following files.
File
Extension of the file
“.mp3”
MP3 file
WMA file*
AAC file*
“.wma”
“.m4a”
JPEG image file
MPEG4 video file
“.jpg” or “.jpeg”
“.mp4” or “.m4v”
* USB device only.
US
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The system will attempt to play any data with the extensions above, even if it is not in MP3/WMA/
AAC/JPEG/MPEG4 format. Playing this data may generate a loud noise which could damage your
speaker system.
• The following can increase the time it takes to start playback:
– when a DATA CD/DATA DVD/USB device is recorded with a complicated tree structure.
– when the audio files, JPEG image files, or video files in another folder have just been played.
• Some files on DATA CDs/DATA DVDs/USB devices cannot be played by the system depending on
the file format.
• The system can play to a depth of 8 folders only.
• The system may not be able to play an audio file, JPEG image file, or video file depending on the file
type.
• Files recorded by a device such as a computer may not be played in the order in which they were
recorded.
• Folders that have no audio files, JPEG image files, or video files are skipped.
• Compatibility with all MP3/WMA/AAC encoding/writing software, recording devices, and
recording media cannot be guaranteed.
• Compatibility with all MPEG4 video encoding/writing software, recording devices, and recording
media cannot be guaranteed.
• The playback order may not be applicable depending on the software used for creating the audio file,
JPEG image file, or video file, or if there are more than 200 folders or 150 files in each folder.
Notes about USB devices
• This system supports Mass Storage Class (MSC) devices.
• This system is not guaranteed to operate with all USB devices or memories.
• Although there are variety of complex functions for USB devices, the playable contents of USB
devices connected to the system are music, photo, and video contents only. For details, refer to the
operating instructions of the USB device.
• When a USB device is inserted, the system reads all the files on the USB device. If there are many
folders or files on the USB device, it may take a long time to finish reading the USB device.
• Do not connect the system and the USB device through a USB hub.
• With some connected USB devices, there may be a delay before an operation is performed by this
system.
• The playback order for the system may differ from the playback order of the connected USB device.
• Always turn off the system before removing the USB device. Removing the USB device while the
system is on may corrupt the data on the USB device.
• Before using a USB device, make sure that no virus-ridden files are on the USB device.
US
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Main unit
Speaker packages
• DAV-DZ170/DAV-DZ171
• DAV-DZ175
• Speaker cords (1 set)
(red/white/green/gray/blue)
• Foot pads (1 set)
Accessories
• Remote commander
(remote) (1)
• FM wire antenna (aerial) (1) • HDMI cable (1)
(DAV-DZ171 only)
or
• R6 (size AA) batteries (2)
• Video cord (1)
• Calibration mic (1)
• Operating Instructions
• Quick Setup Guide
• Easy Setup Disc (DVD)
US
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Control
For more information, refer to the pages indicated in parentheses.
Front panel
A Disc tray
I FUNCTION
Selects the playback source.
J Play operation buttons
C
(remote sensor)
Receives the remote signal. Point the
remote toward here when using the remote.
Z (open/close)
Opens or closes the disc tray.
D MASTER VOLUME control
N (play)
Adjusts the system’s volume.
Starts or re-starts playback.
Transfers tracks/MP3 files onto a USB
device.
x (stop)
Stops playback and remembers the stop
point (resume point).
Lights up during transfer of tracks/MP3
files.
K "/1 (on/standby)
Turns on the unit, or sets it to standby mode.
F
Used for connecting a USB device or iPod.
Used for connecting other components,
such as a portable audio source.
Used for connecting the calibration mic.
US
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
A Playing status indicator
F HDMI indicator
Lights up when a signal is established
between a TV and the unit via HDMI.
B SLEEP indicator
Flashes when the sleep timer is set.
G Surround format indicator
C System status display
H SA-CD indicator
Lights up when a Super Audio CD/CD is
loaded.
D TUNED indicator (Radio only)
Lights up when a station is received.
E ST indicator (Radio only)
Lights up when stereo sound is received.
US
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
ANTENNA
SPEAKERS
SUR
R
SUR
L
COAXIAL 75
FM
TV/CABLE
DIGITAL IN
Y
P
B/CB
P
R/CR
R
AUDIO IN
TV/CABLE
L
VIDEO
OUT
FRONT
R
FRONT
L
SUBWOOFER
CENTER
OPTICAL
COAXIAL
COMPONENT VIDEO OUT
OUT
SPEAKERS
F TV/CABLE (AUDIO IN R/L) jacks
C TV/CABLE (DIGITAL IN OPTICAL/
COAXIAL) jacks (page 22)
G ANTENNA (COAXIAL 75Ω FM) jack
D COMPONENT VIDEO OUT jacks
US
13
Download from Www.Somanuals.com. All Manuals Search And Download.
B Buttons with black/white text labels
Remote control
Function selection buttons (pages 30,
Select the playback source.
The system is turned on automatically when
you press the function selection button
while the system is turned off.
THEATER ONEP-LTAOYUCH TV
BRAVIA Sync
1
1
2
3
DVD/CD
FM
USB
DVD/CD
FM
2,3
4
5
6
TV/
AUDIO
FUNCTION
CABLE
IN
7
8
9
USB
TIME/
SOUND
SYSTEM
TEXT
MODE
MENU
TV/CABLE
AUDIO IN
CLEAR
AUDIO
0
TV INPUT
ANGLE
SUBTITLE
D.TUNING
MEM SEL
DVD
DVD
FUNCTION
Selects the functions in sequence.
TOP MENU
MENU MUTING
VOLUME
4
5
7
6
TIME/TEXT (page 39)
Changes the information in the front panel
display.
RETURN
PRESET
DISPLAY
PRESET
SOUND MODE (page 46)
Selects the sound mode.
TUNING
SHIFT
TUNING
Enters the system menu.
AUDIO (page 34)
Selects the audio format/track.
Number 5/AUDIO IN, VOLUME +, AUDIO,
and N buttons have a tactile dot. Use the tactile
dot as a reference when operating the remote.
SUBTITLE (page 34)
Selects the subtitle language when
multilingual subtitles are recorded on a
DVD VIDEO.
Switches to the optimum video mode for
watching movies automatically.
ANGLE (page 34)
ONE-TOUCH PLAY (page 47)
Activates One-Touch Play.
Switches to other viewing angles when
multi-angles are recorded on a DVD
VIDEO.
TV "/1 (on/standby)*
Turns on your TV or sets it to standby
mode.
Selects the radio frequencies.
Turns on the system or sets it to standby
mode.
Selects the USB device’s memory number
for playback or transfer.
US
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays the playback information on the
TV screen.
C Buttons with pink text labels (The
following buttons work when you press and
hold SHIFT (6).)
Enters the title/chapter numbers, radio
frequencies, etc.
* Works with Sony TVs only. Depending on your TV,
you may not be able to use some of the buttons.
Clears the entry field.
To insert the batteries
Insert two R6 (size AA) batteries (supplied) by
matching the 3 and # ends on the batteries to
the markings inside the compartment.
TV INPUT*
Switches your TV’s input source.
D MUTING
Turns off the sound temporarily.
VOLUME +/– (page 30)
Adjusts the volume.
E Playback operation buttons
./> (previous/next)
m/M (fast reverse/fast forward)
/
(slow)
N (play)
X (pause)
x (stop)
Radio operation buttons
Note
PRESET +/–
TUNING +/–
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
F SHIFT
Press and hold this button to use buttons
with pink text labels (3).
Opens or closes the DVD’s Top Menu.
DVD MENU (page 34)
Opens or closes the DVD’s menu.
C/X/x/c
Moves the highlight to a displayed item.
(ENTER)
Enters the selected item.
Returns to the previous display.
US
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu
You can use the Control Menu to select a function and to view related information.
DISPLAY
Press
DISPLAY while using the “DVD/CD” or “USB” function.
DISPLAY, the Control Menu changes:
Each time you press
1 t 2 t 3 t 1 t ...
1 Control Menu 1
2 Control Menu 2 (appears when available)
3 Control Menu off
US
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Menu
Example: Control Menu 1 when playing a DVD VIDEO.
Currently playing title number
Currently playing chapter number
Total number of titles
Playback status
(N Playback,
Total number of chapters
Control Menu items
X Pause,
x Stop, etc.)
98( 99)
13( 99)
Type of source being
played
DVD VIDEO
T
0: 04: 17
Selected item
OFF
OFF
DISC
Playing time
TITLE
CHAPTER
Current setting
Options
Function name of selected
Control Menu item
REPEAT
ENTER
DISPLAY
Quit:
Operation message
List of Control Menu items
The Control Menu 1 and 2 will show different items depending on the source. For details, see the pages
in parentheses in the chart below.
Item
Item Name, Function, Relevant Source
You can select the title, scene, or track to be played.
You can select the chapter or index to be played.
[INDEX] (page 33)
You can display the index and select the index to be played.
[TRACK] (page 33)
You can select the track to be played.
[ORIGINAL/PLAY LIST] (page 35)
You can select the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or
an edited [PLAY LIST].
[TIME] (page 33)
You can check the elapsed time and the remaining playback time.
You can play from a desired point by inputting the time code (DVD VIDEO/DVD-VR only).
[MULTI/2CH] (page 35)
You can select the playback area on a Super Audio CD when available.
[SUPER AUDIO CD/CD LAYER] (page 35)
You can select the playback layer on a Super Audio CD when available.
US
17
Download from Www.Somanuals.com. All Manuals Search And Download.
[PROGRAM] (page 35)
You can select the track to play in the order you want.
[SHUFFLE] (page 36)
You can play the tracks/files in random order.
[REPEAT] (page 37)
You can play the entire disc/USB device (all titles/all tracks/all folders/all files) repeatedly or
one title/chapter/track/folder/file repeatedly.
[A/V SYNC] (page 51)
You can adjust the delay between the picture and sound.
[DISC MENU] (page 34)
You can display the DVD’s menu.
[BROWSING] (page 31)
You can display the list of folders/JPEG image files.
[SETUP] (page 54)
[CUSTOM]
In addition to the Quick Setup setting, you can adjust various other settings.
[QUICK] (page 26)
You can make basic adjustments. Use the Quick Setup to select the desired language of the
on-screen display, the aspect ratio of your TV, and start the Auto Calibration.
[FOLDER] (page 33)
You can select the folder to be played.
[FILE] (page 33)
You can select the JPEG image file or video file to be played.
1)
1)
[DATE] (page 40)
You can display the date the picture was taken by a digital camera.
[INTERVAL] (page 38)
You can select the duration for which the slides are displayed on the TV screen.
1)
[EFFECT] (page 37)
You can select the effects to be used for changing slides during a slide show.
[MEDIA] (page 32)
2)
2)
You can select the playback priority of different types of media (MP3/AAC /WMA file,
JPEG image file, video file, or both MP3 and JPEG image files ) to be played on a DATA
3)
CD/DATA DVD/USB device.
[USB TRANSFER] (page 49)
You can transfer tracks on an audio CD or MP3 files on a DATA CD/DATA DVD onto a USB
device.
1)These items are not displayed when playing a DATA CD/DATA DVD/USB device with video files.
2)USB device only.
3)DATA CD/DATA DVD only.
Tip
• The Control Menu icon indicator lights up in yellow
t
when you select any item except [OFF]
([PROGRAM], [SHUFFLE], [REPEAT], and [A/V SYNC] only). The [ORIGINAL/PLAY LIST] indicator lights
up in yellow when you select [PLAY LIST] (default setting). The [MULTI/2CH] indicator lights up in yellow when
you select the multi-channel playback area on a Super Audio CD.
US
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Installing the System
How to position the system
Install the system by referring to the illustration below.
A Front speaker (L (left))
B Front speaker (R (right))
C Center speaker
A
B
F
D Surround speaker (L (left))
E Surround speaker (R (right))
F Subwoofer
C
G
G Unit
D
E
To attach the foot pads to the subwoofer
,
Remove the foot pads from
the protective cover.
Note
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
US
19
Download from Www.Somanuals.com. All Manuals Search And Download.
When installing the speakers on a wall
Caution
• Contact a screw shop or installer for information regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
1
Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
2
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
Hole on the back of
4 mm (3/16 inch)
the speaker
5 mm
(7/32 inch)
30 mm (1 3
/16 inches)
10 mm
13
(
/32 inch)
3
Fasten the screws to the wall, then hang the speaker on the wall.
Depth of fastened screw
8 to 10 mm
11
13
(
/
to
/
inch)
32
32
For the other speakers
For the center speaker
145 mm
(5 3
4 inches)
/
US
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the System
Connecting the speakers
1
Insert the connectors of the speaker cords to match the color of the SPEAKERS jacks
of the unit until they click.
Gray
(Surround right speaker (R))
S
R
E
K
A
E
P
S
SUR
L
SUR
R
Blue
(Surround left speaker (L))
CENTER
UBWOOFER
S
R
FRONT
L
K
A
E
P
S
FRONT
R
Green
(Center speaker)
Red
(Front right speaker (R))
Purple
(Subwoofer)
White
(Front left speaker (L))
2
Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.
The subwoofer speaker cord is fixed to the subwoofer.
Rear of the speaker
Color tube
(+)
(–)
Connector
Note
• Do not catch the speaker cord insulation (rubber covering) in the speaker terminals.
US
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV/cable box
When connecting to a TV only
When connecting to a TV and cable box
Video
2 Audio
1 Video
2 Audio
1 Video
1 Connecting the video to your TV
Depending on the jacks on your TV, select one of the connection methods.
x Method 1: Video cord (supplied) connection
This is the basic connection.
x Method 2: HDMI cable* connection
Picture quality will be improved compared to Method 1.
x Method 3: Component video cable (not supplied) connection
Picture quality will be improved compared to Method 1.
IN
EO
VID
IN
/CR
EO
VID
PR
T
/CB
NEN
PO
M
Y
CO
PB
I
IN
DM
H
VIDEO
OUT
/CR
PR
OUT
/CB
PB
Y
COMPONENT VIDEO
Method 1
(supplied)
T
Method 3
(not supplied)
Method 2*
* The HDMI cable is supplied with DAV-DZ171 only.
US
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connecting the audio from your TV/cable box
To listen to TV or cable box sound via the system, select one of the connection methods.
x Method 1: Audio cord (not supplied) connection
This is the basic connection and sends an analog audio signal.
x Method 2: Digital optical cord (not supplied) connection
Sound quality will be improved compared to Method 1.
x Method 3: Digital coaxial cord (not supplied) connection
Sound quality will be improved compared to Method 1.
T
U
O
IO
D
AU
R
L
T
U
ITAL
IG
O
D
COAXIAL
UT
O
ITAL
IG
OPTICAL
D
L
IN
O
D
U
A
R
TV/CABL
TV/CABLE
IN
L
A
IT
IG
D
L
IA
X
A
O
C
IC
T
P
O
Method 1
(not supplied)
Method 3
(not supplied)
Method 2
(not supplied)
Note
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after a few seconds.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV/CABLE
jacks instead of your TV.
US
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the other components
You can enjoy connected components via the system’s speakers.
Connected component
Required cord for connection
Portable audio source (not supplied)
USB device (not supplied)
A Stereo mini-plug cord (not supplied)
B USB connector (not supplied)
B
A
To a portable audio source.
Connecting the antenna (aerial)
ANTENNA
5
7
L
M
IA
X
A
O
C
F
or
FM wire antenna (aerial)
(supplied)
Note
• After connecting the FM wire antenna (aerial), extend and keep it as horizontal as possible.
US
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the AC power cord (mains lead)
Wall outlet (mains): The shape of
the wall outlet (mains) differs
depending on the area.
US
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press X/x to select a language, then
press
.
Step 3: Setting up the
System
LANGUAGE SETUP
OSD:
ENGLISH
ENGLISH
MENU:
AUDIO:
SUBTITLE:
FRENCH
SPANISH
PORTUGUESE
Performing the Quick Setup
Displayed items vary depending on the area.
"/1
Press X/x to select the setting that
matches your TV type, then press
.
VIDEO SETUP
TV TYPE:
16:9
16:9
PROGRESSIVE (COMPON
4:3 OUTPUT:
BLACK LEVEL:
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
4:3 LETTER BOX
4:3 PAN SCAN
OFF
AUTO
• [16:9]: This aspect ratio is for a wide-
screen TV or a 4:3 standard TV with a
wide-screen mode (page 55)
C/X/x/c,
• [4:3 LETTER BOX] or [4:3 PAN SCAN]:
This aspect ratio is for a 4:3 standard TV
DISPLAY
7
Press X/x to select the Control for
HDMI setting, then press
.
1
2
Turn on your TV.
HDMI SETUP
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
AUTO(1920x1080p)
ON
ON
OFF
OFF
SD
YCB
C
R/RGB(HDMI):
AUDIO(HDMI):
3
4
Press "/1 to turn the system on.
JPEG RESOLUTION:
Press
without inserting a disc or
connecting a USB device.
• [ON]: The Control for HDMI function is
set to on.
• [OFF]: The Control for HDMI function is
set to off.
Home Theatre System
ENTER
Press
Press
to run QUICK SETUP.
to erase this message.
CLEAR
Note
• If this message does not appear, press DVD/CD.
If this message still does not appear, recall the
US
26
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Press C/c to select the speaker
formation image as the speakers are
actually positioned, then press
.
SPEAKER FORMATION
STANDARD
• [STANDARD]: Select this when you
install all the speakers normally.
• [NO CENTER]: Select this when you
install the front and surround speakers
only.
Calibration mic
• [NO SURROUND]: Select this when you
install the center and front speakers only.
• [FRONT ONLY]: Select this when you
install the front speakers only.
• [ALL FRONT]: Select this when you
install all the speakers in front of the
listening position.
• [ALL FRONT - NO CENTER]: Select
this when you install the front and
surround speakers in front of the listening
position.
10
11
Press C/c to select [YES], then press
.
Be quiet during the measurement.
Note
9
Connect the calibration mic (supplied)
to the A.CAL MIC jack on the front
panel.
• Loud test sounds are output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbors.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied).
• The environment of the room in which the
system is installed may affect measurements.
When the measurements differ considerably
from the status of the speaker installation,
perform the speaker settings manually by
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
Unplug the calibration mic, press C/c
to select [YES], then press
.
To quit the Quick Setup
Press DISPLAY in any Step.
US
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
7
Press X/x to select [HDMI SETUP], then
press
.
Setting the type of video
output to match your TV
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
AUTO(1920x1080p)
Depending on the connection of your TV
(page 22), select the type of video output of the
system.
ON
OFF
YCBCR
OFF
SD
YCB
C
R/RGB(HDMI):
AUDIO(HDMI):
JPEG RESOLUTION:
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and your TV with an
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
Press X/x to select [HDMI
RESOLUTION], then press
.
1
Press DVD/CD.
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
AUTO(1920x1080p)
ON
OFF
YCBCR
OFF
SD
YCB
C
R/RGB(HDMI):
AUDIO(HDMI):
JPEG RESOLUTION:
2
3
Press
in stop mode.
DISPLAY while the system is
Press X/x to select
then press
[SETUP],
.
Press X/x to select the desired setting,
then press
.
CUSTOM
HDMI SETUP
HDMI RESOLUTION:
AUTO(1920x1080p)
080p
CONTROL FOR HDMAUTO(1920x1
VOLUME LIMIT:
)
1920x1080i
YCB
C
R/RGB(HDMI):
1280 720p
720x480
SD
x
AUDIO(HDMI):
p
JPEG RESOLUTION:
4
Press X/x to select [CUSTOM], then
press
• [AUTO (1920 × 1080p)]: The system
outputs the optimal video signal for the
connected TV.
• [1920 × 1080i]: The system outputs 1920
× 1080i* video signals.
.
CUSTOM
CUSTOM
QUICK
• [1280 × 720p]: The system outputs 1280
× 720p* video signals.
• [720 × 480p]**: The system outputs 720
× 480p* video signals.
* i: interlace, p: progressive
**Depending on the area, [720 × 480/576p] may
appear and the system may output 720 × 576p
video signals.
US
28
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Press X/x to select [PROGRESSIVE
(COMPONENT OUT)], then press
To select the type of video signal
output from the COMPONENT
VIDEO OUT jacks
.
VIDEO SETUP
When you connect the unit and your TV with a
component video cable, select the type of video
signals output from the COMPONENT VIDEO
OUT jacks.
TV TYPE:
16:9
OFF
FULL
ON
PROGRESSIVE (COMPONENT OUT):
4:3 OUTPUT:
BLACK LEVEL:
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
OFF
AUTO
1
Press DVD/CD.
Press X/x to select the desired setting,
then press
.
2
3
Press
in stop mode.
DISPLAY while the system is
VIDEO SETUP
TV TYPE:
PROGRESSIVE (COMPONENT OUT):
4:3 OUTPUT:
BLACK LEVEL:
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
Press X/x to select
then press
[SETUP],
16:9
OFF
ON
OFF
AUTO
.
ON
CUSTOM
[OFF]: The system does not output
progressive signals. Select this setting
when:
– your TV does not accept progressive
signals, or,
4
5
Press X/x to select [CUSTOM], then
press
.
– your TV is connected via jacks other than
the COMPONENT VIDEO OUT jacks.
[ON]: The system outputs progressive
signals. Select this setting when:
CUSTOM
CUSTOM
QUICK
– your TV accepts progressive signals,
and,
– your TV is connected via the
COMPONENT VIDEO OUT jacks.
When you select [ON], the confirmation
display appears. Follow the Steps below.
Press X/x to select [VIDEO SETUP],
8
9
Press C/c to select [START], then
then press
.
press
.
The system outputs a progressive signal for
about 5 seconds. Check that the screen is
displayed correctly.
VIDEO SETUP
TV TYPE:
PROGRESSIVE (COMPONENT OUT):
4:3 OUTPUT:
16:9
OFF
FULL
ON
BLACK LEVEL:
Press C/c to select [YES], then press
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
OFF
AUTO
.
The system outputs a progressive signal.
When you select [NO], the system does not
output a progressive signal.
US
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Files on a Disc/
USB Device
Playback
Playing a Disc
Z
Z
"/1
USB
DVD/CD
FUNCTION
DVD/CD
FUNCTION
C/X/x/c,
DVD MENU
VOLUME +/–
DISPLAY
O
RETURN
VOLUME +/–
N
N
x
1
2
Press DVD/CD or USB.
• DVD/CD: For a disc.
• USB: For a USB device.
1
Press DVD/CD.
You can also select this function by
pressing FUNCTION repeatedly.
You can also select the function by pressing
FUNCTION repeatedly.
2
3
Press Z to open the disc tray.
Load the source.
Place a disc on the tray, then press Z.
x For a disc
Place a disc on the tray by pressing Z to
open/close the disc tray.
x For a USB device
Connect a USB device to the
port.
(USB)
With the label side up.
4
5
Press N to start playback.
Press VOLUME +/– to adjust the
volume.
USB device
US
30
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the USB device
Note
• It may take about 10 seconds before
“READING” appears in the front panel display
depending on the type of USB device.
1
2
3
Press x to stop playback.
Press [/1 to turn off the system.
Remove the USB device.
[FOLDER LIST] appears on the TV screen.
If [FOLDER LIST] does not appear, press
DVD MENU.
Playing a specific file
3
Press X/x to select a folder.
FOLDER LIST
1
Select a folder by following Steps in
01 Let's Talk About Love (1985)
02 1st Album (1986)
03 In the Middle of Nowhere (1986)
04 Ready for Romance (1986)
05 In the Garden of Venus (1987)
06 Romantic Warriors (1987)
07 Back for Good (1988)
2
3
Press
to display the file list.
Select a file.
08 Alone (1999)
To return to the folder list, press O
RETURN.
4
5
Press N to start playback.
x For video or audio files
Press X/x to select a file.
x For video or audio files
The system starts playback of files in the
selected folder.
TRACK LIST
03 In the Middle of Nowher...
x For JPEG image files
The system starts a slide show of files in the
selected folder.
01_Geronimo_s_Cadillac
02_Riding_On_A_White_Swan
03_Give_Me_Peace_On_Earth
04_Sweet_Little_Shella
05_Ten_Thousand_Lonely_Drums
06_Lonely_Tears_In_Chinatown
07_In_Shaire
Press VOLUME +/– to adjust the
volume.
To select the playback source of
the USB device
You can select the memory number for playback
x For JPEG files
Press C/X/x/c to select an image.
depending on the USB device.
1
2
3
4
Press MEM SEL.
Selected memory number
5
6
7
8
9
10
14
11
15
12
16
USB Memory 2 selected.
Home Theatre System
13
4
Start playback.
x For video or audio files
Press Nto start playback from the selected
file.
Note
• When the memory cannot be selected, [Operation not
possible.] appears on the TV screen.
• The memory number changes depending on the USB
device.
x For JPEG image files
Press N to start a slide show beginning
with the selected file. Press
only the selected file.
to display
US
31
Download from Www.Somanuals.com. All Manuals Search And Download.
For details of the playback priority of file
types under the [MEDIA] setting, see
To turn on/off the list of folders/
files
Press DVD MENU.
To display the list of folders/files
using the Control Menu
1
2
Press
DISPLAY.
Other Playback
Operations
Press X/x to select
[BROWSING], then press
.
3
Press X/x to select the desired list,
then press
.
Playback operation buttons on
the remote
• [FOLDER LIST]: A list of folders
appears. To display a list of files, press X/
x to select a folder, then press
.
• [PICTURE LIST] (JPEG image files
only): A thumbnail list of the JPEG image
files in the folder appears.
Depending on the type of disc/file, the function
may not work.
When different file types are
on a disc/USB device
To
Press
x
Stop
Pause
X
Return to normal
playback or resume
playback after
pause
N
You can select the file type that is played with
priority when mixed media (audio files, JPEG
image files, or video files) are on the disc/USB
device.
Cancel the resume x twice.
1
2
Press
Press X/x to select
then press
Press X/x to select a setting, then
press
DISPLAY.
point
Skip the current
chapter, track, file,
or scene
. or >.
[MEDIA],
• .: go to the beginning.
• Press . twice in a second to
go to the previous item.
.
3
.
• >: go to the next item.
• [MUSIC/PHOTO] (DATA CD/DATA
DVD only): You can play both JPEG
image files and MP3 files in the same
folder as a slide show.
Skip the current
JPEG image file
C or c during playback.
• C: go to the previous file.
• c: go to the next item.
Locate a point
quickly
/m or M/
while
• [MUSIC]: Audio file playback has
priority.
playing a disc.
•
/m: fast reverse scan.
• M/ : fast forward scan.
Each time you press /m or
M/ during scan, the scan
speed changes.
• [VIDEO]: Video file playback has
priority.
• [PHOTO]: JPEG image file playback has
priority. You can play JPEG image files as
a slide show.
The default setting differs depending on the
source.
US
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Example:
[CHAPTER]
To
Press
[** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, folders, or files.
Watch frame by
frame
X, then press
/m or M/
.
•
/m: slow-motion play
(reverse).
• M/ : slow-motion play
(forward).
98( 99)
13( 99)
DVD VIDEO
Each time you press
/m or
T
0: 03: 17
M/
during slow-motion
play, the playback speed
changes.
Rotate a JPEG
image file
X/x while viewing a JPEG
image file.
Selected row
Press CLEAR while holding
down SHIFT to return to normal
view.
Note
• If [MEDIA] is set to [MUSIC/PHOTO] and
[FILE] does not appear, press
DISPLAY again.
Tip
• When playing files, you can select the next folder by
continuing to press > (c for JPEG image files)
after the last file on the current folder, but you cannot
return to the previous folder by pressing .(C for
JPEG image files). To return to the previous folder,
select the folder from the folder list.
3
Press X/x to select the desired number
of the title, chapter, track, scene, etc.,
then press
.
You can also select the number by pressing
the number buttons while holding down
SHIFT.
• You cannot rotate the JPEG image file when you set
[JPEG RESOLUTION] in [HDMI SETUP] to [(1920
× 1080i) HD
98( 99)
( 99)
DVD VIDEO
T
0: 03: 17
Playing a specific title/
chapter/track/scene, etc.
To select the title/chapter/track/
scene/index/folder/filenumberfor
playback
If you make a mistake, press CLEAR while
holding down SHIFT to cancel the number.
To select a scene using the time
code
1
2
Press
Press X/x to select the search method,
then press
DISPLAY.
1
2
Press
Press X/x to select
press
DISPLAY.
.
[TIME], then
•
•
•
•
•
•
[TITLE/SCENE/TRACK]
[CHAPTER/INDEX]
[TRACK]
.
3
Input the time code using the number
buttons while holding down SHIFT,
[INDEX]
[FOLDER]
then press
.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds after the
beginning: press 2, 1, 0, 2, 0 ([2:10:20])
while holding down SHIFT.
[FILE]
US
33
Download from Www.Somanuals.com. All Manuals Search And Download.
x DVD-VR
Note
You can toggle audio tracks when a disc
contains multiple audio tracks.
• You cannot search for a scene on a DVD+RW using
the time code.
x VIDEO CD/CD/DATA CD (MP3 file)/DATA
DVD (MP3 file)/USB device (audio file)
You can change the sound track.
Changing angles
• [STEREO]: The stereo sound.
• [1/L]: The sound of the left channel
(monaural).
Press ANGLE during playback to select the
desired angle.
• [2/R]: The sound of the right channel
(monaural).
x Super VCD
Displaying subtitles
You can change the sound track.
• [1:STEREO]: The stereo sound of audio track
1.
Press SUBTITLE during playback to select
the desired subtitle language.
• [1:1/L]: The sound of the left channel of audio
track 1 (monaural).
• [1:2/R]: The sound of the right channel of
audio track 1 (monaural).
Changing the audio
• [2:STEREO]: The stereo sound of audio track
2.
• [2:1/L]: The sound of the left channel of audio
track 2 (monaural).
Press AUDIO repeatedly during playback to
select the sound.
• [2:2/R]: The sound of the right channel of
audio track 2 (monaural).
x DVD VIDEO
You can toggle audio format or language when
the source contains multiple audio formats or
multilingual audio.
Using the DVD’s menu
When 4 digits are displayed, they indicate a
language code. See “Language Code List”
(page 74) to confirm which language the code
represents.
When the same language is displayed two or
more times, the DVD VIDEO is recorded in
multiple audio formats.
When you play a DVD which contains several
titles, you can select the title you want using
DVD TOP MENU.
When you play a DVD that allows you to select
items such as the language for the subtitles and
the language for the sound, select these items
using DVD MENU.
Example:
1
2
Press DVD TOP MENU or DVD MENU.
Dolby Digital 5.1 channel
Press C/X/x/c to select the item you
want to play or change, then press
LFE (Low
Frequency Effect)
.
Surround (L/R)
You can also select the number by pressing
the number buttons while holding down
SHIFT.
1: ENGLISH
DOLBY DIGITAL 3 / 2 .1
L
C
R
Front (L/R) +
Center
LFE
To display the DVD’s menu on the
Control Menu
LS
RS
Currently playing program format
1
Press
DISPLAY.
US
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press X/x to select
MENU], then press
[DISC
.
Changing a playback layer for
a hybrid Super Audio CD
Press X/x to select [MENU] or [TOP
MENU], then press
.
Some Super Audio CDs consist of a Super
Audio CD layer and a CD layer. You can change
the playback layer you want to listen to.
Selecting an original title or
edited title on a DVD-VR
1
2
Press
in stop mode.
DISPLAY while the system is
This function is only available for DVD-VRs
with a playlist created.
Press X/x to select
AUDIO CD/CD LAYER], then press
[SUPER
.
1
2
3
Press
in stop mode.
DISPLAY while the system is
x When the current layer is the CD
layer
[SUPER AUDIO CD] appears.
Press X/x to select
PLAY LIST], then press
[ORIGINAL/
.
x When the current layer is the Super
Audio CD layer
[CD] appears.
Press X/x to select a setting, then
press
.
• [PLAY LIST]: You can play the titles in
the order of the existing playlist.
3
Press
to change the layer.
• [SUPER AUDIO CD]: You can play the
Super Audio CD layer.
When the system is playing a Super Audio
CD layer, “SA-CD” lights up in the front
panel display.
• [ORIGINAL]: You can play the titles as
they were originally recorded.
Selecting a playback area for a
Super Audio CD
• [CD]: You can play the CD layer.
When the system is playing a CD layer,
“CD” lights up in the front panel display.
Note
Some Super Audio CDs consist of a 2 channel
playback area and a multi-channel playback
area. You can select the playback area you want
to listen to.
• Super Audio CD audio signals are not output from the
HDMI OUT jack.
1
2
3
Press
in stop mode.
DISPLAY while the system is
Selecting the Playback
Mode
Press X/x to select
2CH], then press
[MULTI/
.
Press X/x to select the setting, then
press
.
Playing in programmed order
(Program Play)
• [MULTI]: You can play the multi-channel
playback area.
• [2CH]: You can play the 2 channel
playback area.
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
US
35
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press
Press X/x to select
then press
Press X/x to select [SET t], then
press
DISPLAY.
To return to normal playback
Press CLEAR while holding down SHIFT when
the display for the program setting is not
displayed on the TV screen, or select [OFF] in
Step 3. To play the same program again, select
[PROGRAM],
.
3
.
[ON] in Step 3 and press
.
Total time of the programmed tracks
To change or cancel a program
PROGRAM
0: 00:00
T
1
2
Follow Steps 1 to 3 of “Playing in
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
– –
– –
– –
– –
– –
– –
– –
– –
01
02
03
04
05
06
Press X/x to select the program
number of the track you want to
change or cancel.
If you want to delete the track from the
program, press CLEAR while holding
down SHIFT.
Tracks recorded on a disc
4
5
Press c.
3
Follow Step 5 of “Playing in
programmed order” for new
programming.
The cursor moves to the track row [T] (in
this case, [01]).
To cancel a program, select [--] under [T],
PROGRAM
0: 00:00
T
then press
.
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
– –
– –
– –
– –
– –
– –
– –
– –
01
02
03
04
05
06
To cancel all of the tracks in the
programmed order
1
2
Follow Steps 1 to 3 of “Playing in
Press X and select [ALL CLEAR], then
press
.
Select the track you want to program.
Ex. To set track 2 as the first
programmed track
Playing in random order
Press X/x to select [02] under [T], then
press
.
(Shuffle Play)
Selected track Track number [T]
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
0: 03:51
T
Note
02
– –
– –
– –
– –
– –
– –
– –
01
02
03
04
05
06
• The same song may be played repeatedly when you
are playing MP3 files.
1
2
Press
Press X/x to select
then press
DISPLAY during playback.
[SHUFFLE],
.
Total time of the programmed tracks
6
7
To program other tracks, repeat Steps
4 to 5.
Press N to start Program Play.
US
36
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press X/x to select the item to be
shuffled.
x VIDEO CD/Super Audio CD/CD
• [OFF]: Off.
• [DISC]: You can repeat all of the tracks
on the disc.
x VIDEO CD/Super Audio CD/CD
• [OFF]: Off.
• [TRACK]: You can repeat the current
track.
• [TRACK]: You can shuffle tracks on the
disc.
x DATA CD/DATA DVD/USB device
• [OFF]: Off.
x During Program Play
• [OFF]: Off.
• [DISC] (DATA CD/DATA DVD only):
You can repeat all of the folders on the
disc.
• [MEMORY] (USB device only): You can
repeat all of the folders on the USB
device.
• [ON]: You can shuffle tracks selected in
Program Play.
x DATA CD (audio files only)/DATA
DVD (audio files only)/USB device
(audio files only)
• [OFF]: Off.
• [FOLDER]: You can repeat the current
folder.
• [ON (MUSIC)]: You can shuffle audio
files in the folder on the current disc/USB
device. When no folder is selected, the
audio files in the first folder are shuffled.
• [TRACK] (audio files only): You can
repeat the current file.
• [FILE] (video files only): You can repeat
the current file.
4
Press
to start Shuffle Play.
4
Press N to start Repeat Play.
To return to normal playback
Press CLEAR while holding down SHIFT, or
select [OFF] in Step 3.
To return to normal playback
Press CLEAR while holding down SHIFT, or
select [OFF] in Step 3.
Note
• You cannot use Shuffle Play with a VIDEO CD or
Super VCD with PBC playback.
Note
• You cannot use Repeat Play with a VIDEO CD or
Super VCD with PBC playback.
Playing repeatedly
(Repeat Play)
Selecting an effect for the
slide show
1
2
Press
Press X/x to select
then press
Press X/x to select the item to be
DISPLAY during playback.
1
Press
DISPLAY repeatedly until
[EFFECT] appears on the
[REPEAT],
.
control menu.
3
2
3
Press X/x to select
[EFFECT],
repeated, then press
.
then press
Press X/x to select a setting, then
press
.
x DVD VIDEO/DVD-VR
• [OFF]: Off.
.
• [DISC]: You can repeat all of the titles on
the disc.
• [MODE 1]: The JPEG image file sweeps
in from the top to the bottom of the TV
screen.
• [TITLE]: You can repeat the current title
on a disc.
• [MODE 2]: The JPEG image file stretches
out from the left to the right of the TV
screen.
• [CHAPTER]: You can repeat the current
chapter on a disc.
US
37
Download from Www.Somanuals.com. All Manuals Search And Download.
• [MODE 3]: The JPEG image file stretches
out from the center of the TV screen.
• [MODE 4]: The JPEG image files
randomly cycle through the effects.
• [MODE 5]: The next JPEG image file
slides over the previous image.
• [OFF]: Off.
Playing a slide show with
sound
1
Prepare a folder on a disc which
contains both MP3 files and JPEG
image files.
Note
• The [EFFECT] setting is not effective when you set
[JPEG RESOLUTION] in [HDMI SETUP] to [(1920
The MP3 files and JPEG image files must
not be in separate folders. For details of
making the disc, refer to the instructions of
your PC, software, etc.
× 1080i) HD
• The [EFFECT] setting cannot be selected when you
are playing a disc that does not contain JPEG image
files or a USB device, or when you set [MEDIA] to a
setting that cannot play JPEG image files.
2
3
Press
Press X/x to select
then press
DISPLAY.
[MEDIA],
.
Selecting the slide show
duration
4
When [MUSIC/PHOTO] is selected, go
to Step 5. When other than [MUSIC/
PHOTO] is selected, press X/x to select
[MUSIC/PHOTO], then press
.
5
If the folder list does not appear, press
DVD MENU.
1
Press
DISPLAY repeatedly until
[INTERVAL] appears on the
You can turn the folder list on/off by
pressing DVD MENU repeatedly.
control menu.
2
3
Press X/x to select
[INTERVAL],
6
Press X/x to select the desired folder
and press N.
then press
Press X/x to select a setting, then
press
.
Note
.
• If you play a large MP3 file and JPEG image file at
the same time, the sound may skip. Sony
recommends that you set the MP3 bit rate to 128 kbps
or lower when creating the file. If the sound still
skips, reduce the size of the JPEG image file.
• [NORMAL]: You can set to the standard
duration.
• [FAST]: You can set the duration shorter
than [NORMAL].
• [SLOW 1]: You can set the duration
longer than [NORMAL].
• [SLOW 2]: You can set the duration
longer than [SLOW 1].
Note
• Some JPEG image files may take longer to display
than the option you selected, especially progressive
JPEG image files or JPEG image files of 3,000,000
pixels or more.
• The [INTERVAL] setting cannot be selected when
you are playing a disc that does not contain JPEG
image files or a USB device, or when you set
[MEDIA] to a setting that cannot play JPEG image
files.
US
38
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.
ID3 ver 2.2/2.3 tag information display has
priority when both ID3 ver 1.0/1.1 and ver
2.2/2.3 tags are used for a single MP3 file.
Displaying the
Information of a Disc/
USB Device
5
Text information
The DVD/Super Audio CD/CD text
appears only when text is recorded on the
disc. You cannot change the text. If the disc
does not contain text, “NO TEXT” appears.
Viewing playback information
Note
• Depending on the source being played, the system
can only display a limited number of characters. Also,
depending on the source, not all text characters will
be displayed.
Press TIME/TEXT repeatedly during
playback.
Information in the front panel
display
Information on the TV screen
1
2
3
Each time you press TIME/TEXT during
playback, the following information appears.
Some displayed items may disappear after a few
seconds.
T
0: 13 192k MP3
x DVD VIDEO/DVD-VR
1 Playing time of the current title
2 Remaining time of the current title
3 Playing time of the current chapter
4 Remaining time of the current chapter
5 Disc name
4, 5
Dvorak/Tchaikovsky/NedPho/Kreizberg
Adagio - Allegro molto
1
[T **:**:**/C **:**:**/D **:**:**]
6 Title and chapter
Playing time of the current title, track/
chapter/disc
x VIDEO CD (with PBC functions)/Super
VCD (with PBC functions)
1 Playing time of the current item
2 Disc name
[T-**:**:**/C-**:**:**/D-**:**:**]
Remaining time of the current title, track/
chapter/disc
3 Scene number
x VIDEO CD (without PBC functions)/
Super Audio CD/CD
[**:**:**]
Playing time of the current scene/video file
1 Playing time of the current track
2 Remaining time of the current track
3 Playing time of the disc
4 Remaining time of the disc
5 Track name
2
3
4
Bit rate
Appears when playing an audio file.
File type
Appears when playing an audio/video file.
6 Track and index*
* VIDEO CD/Super Audio CD only.
Folder/file name
Appears when playing an audio file/JPEG
image file/video file.
x Super VCD (without PBC functions)
1 Playing time of the current track
2 Track text
If an MP3 file has an ID3 tag, the system
will display an album name/title name from
the ID3 tag information.
3 Track and index number
The system can support ID3 ver 1.0/1.1/2.2/
US
39
Download from Www.Somanuals.com. All Manuals Search And Download.
x DATA CD/DATA DVD/USB device (audio
file)
1 Playing time and current track number
EnjoyingtheAudio/Video
of the Connected
Component
2 Track (file) name*
* If an MP3 file has an ID3 tag, the system will
display a title name from the ID3 tag information.
The system can support ID3 ver 1.0/1.1/2.2/2.3.
ID3 ver 2.2/2.3 tag information display has priority
when both ID3 ver 1.0/1.1 and ver 2.2/2.3 tags are
used for a single MP3 file.
x DATA CD (video file)/DATA DVD (video
file)/USB device (video file)
1 Playing time of the current file
2 Current file name
Function
selection
buttons
3 Current album and file number
Note
• The system can only display the first level of the
DVD/CD text, such as the disc name or title.
• The disc name or track name may not be displayed
depending on the text.
• Playing time of MP3 files and video files may not be
displayed correctly.
1
Use the function selection buttons to
select the desired function.
The selected item appears in the front panel
display.
Viewing the date information
of a JPEG image file
Button
Source
DVD/CD
Disc that is played by the
system
You can check the date information during
playback when the Exif* tag is recorded in the
JPEG image file.
FM
FM radio
USB
USB device or iPod that is
Press
DISPLAY repeatedly until
connected to the
port.
(USB)
[DATE] appears on the control menu.
TV/CABLE
AUDIO IN
TV or cable box
5(
8)
10( 15)
Portable audio source that
is connected to the AUDIO
IN jack on the front panel
DATA CD
18/9/2002
Date information
You can also select the desired function by
pressing FUNCTION repeatedly.
* “Exchangeable Image File Format” is a digital
camera image format defined by the Japan
Electronics and Information Technology Industries
Association (JEITA).
US
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Prepare the source.
Remote buttons for operating an iPod connected
to the system are as follows:
• DVD/CD: Insert the disc into the unit
• TUNER FM: Select the radio program
• USB: Connect the USB device directly
(page 30), or iPod via a USB cable
Press
Operation
N, X
Same operation as the N/X button
of the iPod.
x
Pause.
/m or
Fast reverse or forward.
• TV/CABLE: Select the channel on the TV
or cable box.
M/
. or >
Same operation as the . or >
• AUDIO IN: Connect the portable audio
source via an audio cord (stereo mini-plug
buttons of the iPod.
DISPLAY, Same operation as the MENU button
O RETURN, of the iPod.
C
Operate the connected component.
X/x
Same operation as the Click Wheel
of the iPod.
To enjoy a cable box, select the input of the
cable box via the TV to which it is
connected.
, c
Same operation as the Center button
of the iPod.
iPod models that can be operated
via USB
You can operate an iPod using the buttons on the
Note
• The iPod is charged when connected to the system
while the system is turned on.
remote by connecting the iPod via the
port to the system.
(USB)
• You cannot transfer songs onto the iPod.
• Sony cannot accept responsibility in the event that
data recorded to iPod is lost or damaged when using
an iPod connected to this unit.
The battery of the iPod is charged via the
system.
The iPod models that can be operated via USB
are as follows. Update your iPod with the latest
software before using it with the system.
• This product has been designed specifically to work
with iPod and has been certified to meet Apple
performance standards.
US
41
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the preset number
Select the desired preset number by pressing
procedure from Step 3.
Tuner
Presetting Radio
Stations
Listening to the Radio
Preset radio stations in the system’s memory
You can preset 20 FM stations.
Current station
Current band and preset number
FM
1
2
Press FM.
Press PRESET +/– repeatedly to select
the preset station.
FM 10 : 88.00 MHz
3
Adjust the volume by pressing
VOLUME +/–.
To listen to radio stations when
you know the frequencies
1
2
Press FM.
Press and hold TUNING +/– until the
auto scanning starts.
Press D.TUNING in Step 2, press the number
buttons while holding down SHIFT to select the
Scanning stops when the system tunes in a
station. “TUNED” appears in the front
panel display. When a stereo program is
received, “ST” also appears in the front
panel display.
frequencies, then press
.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING +/–
repeatedly.
For automatic tuning, press and hold TUNING
+/–. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING +/– or x.
3
4
5
Press SYSTEM MENU.
Press X/x to select “MEMORY.”
Press
or c.
A preset number appears in the front panel
display.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
6
7
Press X/x to select the preset number
you want.
1
2
Press SYSTEM MENU.
Press X/x to select “FM MODE.”
Press
.
“COMPLETE” appears in the front panel
display, and the station is stored.
8
9
Repeat Steps 2 to 7 to store other
stations.
3
4
Press
or c.
Press X/x to select “MONO.”
• “STEREO”: Stereo reception.
• “MONO”: Monaural reception.
Press SYSTEM MENU.
US
42
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press
.
Press SYSTEM MENU.
US
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Effect
Enjoying Surround Sound
You can enjoy surround sound simply by selecting one of the system’s pre-programmed surround
settings.
Enjoying TV sound with the 5.1 channel surround sound effect
1
2
Press SYSTEM MENU.
Press X/x to select “SUR.SETTING,” then press
or c.
The selected item appears in the front panel display.
3
Press X/x to select “PRO LOGIC,” then press
.
4
Press SYSTEM MENU.
Note
• When TV program sound is monaural, sound is output only from the center speaker.
Selecting surround settings based on your listening preference
1
2
Press SYSTEM MENU.
Press X/x to select “SUR.SETTING,” then press
or c.
The selected item appears in the front panel display.
3
4
Press X/x to select the surround setting you want, then press
.
See the table below for surround setting descriptions.
Press SYSTEM MENU.
About speaker output
The table below describes the options when you connect all the speakers to the unit and you set
Sound from
Surround setting
Effect
“A.F.D. MULTI”
• 2 channel source: The system outputs 2 channel sound from
the front and surround speakers by assigning the 2 channel
sound to the surround left and right channels.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
(AUTO FORMAT
DIRECT MULTI)
US
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound from
Surround setting
Effect
“PRO LOGIC”
“PLII MOVIE”
“PLII MUSIC”
• 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from all the
speakers.
– “PRO LOGIC” performs Dolby Pro Logic decoding.
– “PLII MOVIE” performs Dolby Pro Logic II movie
mode decoding.
– “PLII MUSIC” performs Dolby Pro Logic II music mode
decoding.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
“2CH STEREO”
The system outputs the sound from the front speakers and
subwoofer regardless of sound format or number of channels.
Multi-channel surround formats are downmixed to 2
channels.
Depending on the source.
“A.F.D. STD”
The system discriminates the sound format of the source and
presents sound as it was recorded/encoded.
(AUTO FORMAT
DIRECT STANDARD)
Note
• You cannot select the surround settings while the system is loading a disc.
• Depending on the input stream, the surround settings may not be effective.
US
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound
Effect
Selecting the effect to suit the
source
Press SOUND MODE repeatedly during
playback until the desired mode appears in
the front panel display.
• “AUTO”: The system automatically selects
“MOVIE” or “MUSIC” to produce the sound
effect depending on the source. “AUTO”
appears in the front panel display.
• “MOVIE”: The system provides the sound for
movies. “MOVIE” appears in the front panel
display.
• “MUSIC”: The system provides the sound for
music. “MUSIC” appears in the front panel
display.
Note
• When you play a Super Audio CD, this function does
not work.
Enhancing compressed sound
You can enhance compressed sound such as an
MP3 file.
This effect is activated automatically when all
the following conditions are satisfied:
– The function is set to “AUDIO IN” or “USB.”
– “SUR.SETTING” is set to “A.F.D. STD” or
To turn off the sound effect
Select other than “A.F.D. STD” or “A.F.D.
US
46
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Make sure that the system and your TV
are connected with an HDMI cable.
Convenient Functions
Turn on your TV and press [/1 to turn
on the system.
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified as
below:
Switch the input selector on your TV so
that the signal from the system through
the HDMI input appears on the TV
screen.
4
Set the Control for HDMI function of
your TV.
For details of the setting of your TV, refer
to the operating instructions of your TV.
5
6
On the system, press DVD/CD.
Press
DISPLAY while the system is
in stop mode.
7
Press X/x to select
[SETUP],
then press
Press X/x to select [CUSTOM], then
press
Press X/x to select [HDMI SETUP], then
press
Press X/x to select [CONTROL FOR
HDMI], then press
.
8
.
9
.
10
11
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
.
Press X/x to select [ON], then press
.
Note
• Depending on the connected component, the Control
for HDMI function may not work. Refer to the
operating instructions of the component.
Turning the system off in sync
with your TV
(System Power Off)
Preparing the Control for HDMI
function
When you turn your TV off by using the
POWER button on your TV’s remote or TV [/1
on the system’s remote, the system turns off
automatically.
(Control for HDMI - Easy Setting)
If your TV is compatible with the Control for
HDMI - Easy Setting function, you can set the
system’s [CONTROL FOR HDMI] function
automatically by setting your TV. For details,
refer to the operating instructions of your TV.
Note
• This function depends on the settings of your TV. For
details, refer to the operating instructions of your TV.
• Depending on the status of the system (ex. while
playing a CD), the system may not turn off
automatically.
If your TV is not compatible with the Control for
HDMI - Easy Setting function, set the Control
for HDMI function of the system and TV
manually.
US
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Watching a DVD by a single
button press
• You can also operate the System Audio Control
function via the TV menu.
• You can operate the volume and mute control of the
system via the TV remote.
(One-Touch Play)
Press ONE-TOUCH PLAY
Your TV turns on, your TV’s function is set to
the HDMI input to which the system is
connected, and the system starts playing a disc
automatically.
The System Audio Control function is also
activated automatically.
Limiting the volume level of TV
sound from the system’s
speakers
(Volume Limit)
When the System Audio Control function is
activated and TV sound is output from the
system’s speakers, the volume level is limited to
the level that is set in [VOLUME LIMIT]. For
Using the Theater Mode
(Theater Mode)
If your TV is compatible with the Theater Mode,
you can enjoy optimal image and sound quality
suited for movies, and the System Audio Control
function is activated automatically.
Operating the system via the
TV remote
Press THEATER.
(Remote Easy Control)
You can control the basic functions of the
system via the TV remote when the system’s
video output is displayed on the TV screen. For
details, refer to the operating instructions of the
TV.
Enjoying TV sound from the
speakers by this system
(System Audio Control)
To use this function, connect the system and
your TV with an audio cord and an HDMI cable
Changing the language for the
system’s on-screen display in
sync with your TV
Press [/1 to turn on the system while your
TV is turned on.
The System Audio Control function is activated.
TV sound is output from the system speakers,
and the volume of your TV’s speakers is
minimized automatically.
(Language Follow)
When you change the language for the on-screen
display of your TV, the system’s on-screen
display language is also changed.
Note
Note
• While your TV is in PAP (picture and picture) mode,
the System Audio Control function will not work.
When your TV exits PAP mode, the output method of
your TV returns to the one before PAP mode.
• When you turn the system on by pressing the function
selection button, video and sound may not match.
• Depending on the TV, when you adjust the system’s
volume, the volume level appears on the TV screen.
In this case, the volume levels that appear on the TV
screen and the front panel display of the system may
differ.
• When the system’s on-screen display is displayed,
this function does not work.
US
48
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the transfer destination
of the USB device
You can select the memory number for transfer
Transferring Songs onto
a USB Device
You can transfer songs on an audio CD onto a
USB device by encoding to MP3 format. You
can also transfer MP3 files on a DATA CD/
DATA DVD onto a USB device.
depending on the USB device.
Press MEM SEL.
Selected memory number
For connecting the USB device, see “Playing
USB Memory 2 selected.
Home Theatre System
The transferred music is limited to private use
only. Use of the music beyond this limit requires
permission of the copyright holders.
Note
Notes on USB transferring
• Do not connect the unit and the USB device
through a USB hub.
• When the memory cannot be selected, [Operation not
possible.] appears on the TV screen.
• The memory number changes depending on the USB
device.
• Make sure there is enough space in the USB
device for transferring.
• Select a transfer destination before transfer.
• Do not remove the USB device during
transferring.
Folder and file generation rules
When transferring onto a USB device, a
“MUSIC” folder is created directly below the
“ROOT”. Folders and files are generated within
this “MUSIC” folder as follows according to the
transferring method and source.
• When you are transferring tracks from an
audio CD, the tracks are recorded as 128 kbps
MP3 files.
• When you are transferring MP3 files from a
DATA CD/DATA DVD, the MP3 files are
transferred with the same bit rate as the
original MP3 files.
• CD text information is not transferred in the
created MP3 files.
• When transferring multiple tracks on an audio
CD or multiple MP3 files on a DATA CD/
DATA DVD
Source
MP3
Folder name
File name
• If you stop a transfer from an audio CD
halfway, the MP3 file that was being created is
deleted.
1)
Same as the transferring source
2)
3)
Audio CD
“FLDR001”
“TRACK001”
• Transferring stops automatically if:
• When transferring a single track on an audio
CD or a single MP3 file on a DATA CD/
DATA DVD
– the USB device runs out of space during
transfer.
– the number of folders on the USB device
reaches the limit for the number that the
system can recognize.
• You can store up to 150 files in a folder.
• You can store up to 199 folders in a single
USB device.
Source
Folder name
File name
4)
MP3
“REC1-MP3”
Same as the
transferring
1)
source
4)
3)
Audio CD
“REC1-CD”
“TRACK001”
1)Up to 64 characters of the name are assigned
(including the extension).
2)Folders are assigned in numeric order thereafter.
3)Files are assigned in numeric order thereafter.
• If a folder or file that you are trying to transfer
already exists on the USB device with the
same name, a sequential number is added after
the name without overwriting the original
folder or file.
US
49
Download from Www.Somanuals.com. All Manuals Search And Download.
4)A new file is transferred in the “REC1-MP3” or
“REC1-CD” folder each time single-track
transferring is performed.
x For an audio CD
Remaining space of the USB device
USB TRANSFER
1
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
01
02
03
04
05
06
07
08
START
ALL
Transferring tracks on an
audio CD or MP3 files on a
DATA CD/DATA DVD onto a USB
device
2
3
ALL
1
2
3
Load an audio CD/DATA CD/DATA
DVD.
Tracks to be transferred.
x For a DATA CD/DATA DVD
Remaining space of the USB device
Press
DISPLAY while the system is
in stop mode.
Press X/x to select
TRANSFER], then press
[USB
.
USB TRANSFER
2002_Remixes
01_Back_Seat_O...
02_One_Nights_...
03_Are_You_Ma...
04_I_Can_Lose_...
05_Soul_Survivo...
06_Strangers_B...
07_Stay_maxi_ve...
START
ALL
x For an audio CD
Press
and skip to Step 5.
ALL
x For a DATA CD/DATA DVD
Follow the next Step.
4
Press X/x to select [TRACK] or
MP3 files/folders to be transferred.
[FOLDER], then press
.
• [TRACK]: The folder list appears. Press
X/x to select the desired folder, then press
.
Transferring by single button
press
• [FOLDER]: The folders recorded on the
DATA CD/DATA DVD appear. You can
transfer all MP3 files in the folder.
You can transfer tracks/MP3 files simply onto a
USB device by using REC TO USB.
5
6
Press C/X/x/c to select [x ALL] (for an
audio CD) or [ ALL] (for a DATA CD/
1
2
Load an audio CD/DATA CD/DATA
DVD.
DATA DVD), then press
To deselect all tracks, select [s ALL], then
press
Press C/X/x/c to select [START], then
press
To cancel transferring, press x.
.
Press x.
.
To transfer all tracks, skip to Step 4.
To transfer a single track, follow the next
Step.
.
3
4
Select the desired track/MP3 file, then
press N.
To select individual tracks/MP3
files/folders
Press X/x to highlight the track/MP3 file/folder,
then press
To cancel the selection, highlight the track/MP3
file/folder, then press to remove the check.
Press REC TO USB on the unit.
REC TO USB lights up and “READING”
appears in the front panel display. Then,
“PUSH PLAY” and the remaining space of
the USB device appear alternately in the
front panel display.
to add a check in Step 5.
US
50
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press N to start transferring.
When transferring is completed,
“COMPLETE” appears in the front panel
display and playback of the disc and USB
device stops automatically.
Using the sleep timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
To cancel transferring, press x.
1
2
Press SYSTEM MENU.
Press X/x to select “SLEEP,” then
press
or c.
Erasing audio files on a USB
device
The selected item appears in the front panel
display.
You can erase audio files (“.mp3,” “.wma,” or
“.m4a”) on the USB device.
3
4
Press X/x to select a setting, then
press
.
The minutes display (the remaining time)
changes by 10 minutes.
1
2
3
Press USB.
Press X/x to select a folder.
Select the audio file(s).
Press SYSTEM MENU.
x To erase all audio files in a folder
Press CLEAR while holding down SHIFT.
Adjusting the Delay
Between the Picture and
Sound
x To erase an audio file
Press
and press X/xto select the desired
audio file, then press CLEAR while holding
down SHIFT.
4
Press C/c to select [YES], then press
[A/V SYNC]
.
To cancel, select [NO], then press
.
Note
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
• Do not remove the USB device while erasing.
• If the folder to be erased contains non-audio format
files or sub folders, these are erased from the list on
the TV screen, but are not erased from the USB
device.
1
2
Press
Press X/x to select
then press
Press X/x to select a setting, then
press
DISPLAY.
[A/V SYNC],
.
3
.
• [OFF]: Off.
• [ON]: You can adjust the delay between
the picture and sound.
Note
• Depending on the input stream, [A/V SYNC] may not
be effective.
US
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive a Dolby Digital signal, you need to
connect a TV or other component to the unit with a
Press AUDIO repeatedly to select the audio
signal.
The selected item appears in the front panel
display.
• “MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN+SUB”: Mixed sound of both the main
and sub languages will be output.
Changing the Input Level
of the Sound from
Connected Components
The sound distortion of the connected
component may be improved by reducing the
input level.
1
2
3
Press TV/CABLE or AUDIO IN.
Press SYSTEM MENU.
Press X/x to select “ATTENUATE,”
then press
Press X/x to select a setting, then
press
or c.
4
.
• “ATT ON”: You can attenuate the input
level.
• “ATT OFF”: Normal input level.
This setting is made separately for each
function.
5
Press SYSTEM MENU.
US
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Reperforming the Quick
Setup
Settings
Changing the Brightness
of the Front Panel
Display
1
2
Press DVD/CD.
Press
DISPLAY while the system is
in stop mode.
3
4
Press X/x to select
[SETUP],
1
2
Press SYSTEM MENU.
then press
.
Press X/x to select “DIMMER,” then
press
Press X/x to select [QUICK], then press
or c.
.
The selected item appears in the front panel
display.
Perform the Quick Setup following the
procedure of “Performing the Quick Setup”
3
4
Press X/x to select the brightness of
the front panel display, then press
.
• “DIMMER OFF”: The front panel display
is bright.
• “DIMMER ON”: The front panel display
is dim.
Set the System to
Standby Mode
Automatically
Press SYSTEM MENU.
The system enters standby mode automatically
when you do not operate the system for about 30
minutes and the system is not outputting sound
for about 30 minutes. “AUTO STBY” begins to
flash in the front panel display about 2 minutes
before the system enters standby mode.
Setting the
Demonstration Mode to
On/Off
You can turn on/off the demonstration in the
front panel display while the system is in
standby mode.
You can turn the auto standby function on/off.
1
2
Press SYSTEM MENU.
Press X/x to select “AUTO STBY,” then
press
or c.
1
2
Press SYSTEM MENU.
The selected item appears in the front panel
display.
Press X/x to select “DEMO,” then
press
or c.
3
4
Press X/x to select the setting, then
The selected item appears in the front panel
display.
press
.
• “ON”: On.
3
4
Press X/x to select a setting, then
• “OFF”: Off.
press
.
• “DEMO OFF”: Off.
• “DEMO ON”: On.
Press SYSTEM MENU.
Press SYSTEM MENU.
US
53
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Press X/x to select an item, then press
.
Performing Further
Settings
You can make various adjustments to items such
as picture and sound.
The options for the selected item appear.
Example: [TV TYPE]
VIDEO SETUP
TV TYPE:
16:9
16:9
PROGRESSIVE (COMPON
4:3 OUTPUT:
BLACK LEVEL:
4:3 LETTER BOX
Displayed items vary depending on the area.
4:3 PAN SCAN
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
OFF
AUTO
Note
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
Options
1
2
Press DVD/CD.
Press X/x to select a setting, then
press
.
Press
DISPLAY while the system is
The setting is selected and setup is
complete.
in stop mode.
3
4
5
Press X/x to select
[SETUP],
Example: [4:3 LETTER BOX]
then press
Press X/x to select [CUSTOM], then
press
Press X/x to select the setup item, then
press
.
VIDEO SETUP
TV TYPE:
4:3 LETTER BOX
.
PROGRESSIVE (COMPONENT OUT):
4:3 OUTPUT:
BLACK LEVEL:
OFF
FULL
ON
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
OFF
AUTO
.
• [LANGUAGE SETUP] (page 54)
• [VIDEO SETUP] (page 55)
• [HDMI SETUP] (page 56)
Selected setting
• [AUDIO SETUP] (page 57)
• [SYSTEM SETUP] (page 58)
• [SPEAKER SETUP] (page 60)
To reset all of the [SETUP]
settings
To reset all of the [SETUP] settings, see
Example: [VIDEO SETUP]
Selected item
Setting the display or sound
track language
VIDEO SETUP
TV TYPE:
16:9
OFF
FULL
ON
PROGRESSIVE (COMPONENT OUT):
4:3 OUTPUT:
BLACK LEVEL:
[LANGUAGE SETUP]
BLACK LEVEL (COMPONENT OUT):
PAUSE MODE:
OFF
AUTO
Set various languages for the on-screen display
or sound track.
Setup items
x [OSD] (On-Screen Display)
You can switch the display language on the TV
screen.
x [MENU]
You can switch the language for the disc’s
menu.
US
54
Download from Www.Somanuals.com. All Manuals Search And Download.
[4:3 PAN SCAN]: Select this when you connect
a 4:3 standard TV. The system automatically
displays a wide picture on the entire screen and
cuts off the portions that do not fit.
x [AUDIO]
You can switch the language of the sound track.
When you select [ORIGINAL], the language
given priority on the disc is selected.
x [SUBTITLE]
You can switch the language of the subtitles
recorded on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
x [PROGRESSIVE (COMPONENT OUT)]
You can set the progressive signal that is output
from the COMPONENT VIDEO OUT jacks to
on/off. For details, see “To select the type of
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
[OFF]: The system outputs interlace signals.
[ON]: The system outputs progressive signals.
When you select [ON], follow the Steps below.
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
number buttons.
1
2
Select [ON], then press
Press C/c to select [START], then
press
.
.
The system outputs a progressive signal for
about 5 seconds. Check that the screen is
displayed correctly.
Settings for the display
[VIDEO SETUP]
3
Press C/c to select [YES], then press
.
Select settings according to your TV.
The system outputs a progressive signal. If
you select [NO], the system will not output
a progressive signal.
x [TV TYPE]
You can select the aspect ratio of the connected
TV.
Note
• [PROGRESSIVE (COMPONENT OUT)] is
effective only when you connect the unit and TV with
[16:9]: Select this when you connect a wide-
screen TV or a TV with a wide-screen mode.
x [4:3 OUTPUT]
When you use a 16:9 aspect ratio TV, you can
adjust the aspect ratio to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not the
system.
[4:3 LETTER BOX]: Select this when you
connect a 4:3 standard TV. The system displays
a wide picture with bands on the upper and
lower portions of the TV screen.
[FULL]: Select this when you can change the
aspect ratio on your TV.
[NORMAL]: Select this when you cannot
change the aspect ratio on your TV. A 16:9
aspect ratio signal with black bands on left and
right sides of the image appears.
US
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for HDMI
[HDMI SETUP]
16:9 aspect ratio TV
x [HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack.
Note
• [4:3 OUTPUT] is effective only when you set [TV
TYPE] in [VIDEO SETUP] to [16:9].
[AUTO (1920 × 1080p)]: The system outputs
the optimal video signal for the connected TV.
[1920 × 1080i]: The system outputs 1920 ×
1080i* video signals.
[1280 × 720p]: The system outputs 1280 ×
720p* video signals.
x [BLACK LEVEL]
You can select the black level (setup level) for
the video signals output from the jacks other
than COMPONENT VIDEO OUT/HDMI OUT.
[ON]: The standard level.
[OFF]: You can lower the standard black level.
Use this when the picture becomes too white.
[720 × 480p]**: The system outputs 720 ×
480p* video signals.
* i: interlace, p: progressive
**Depending on the area, [720 × 480/576p] may
appear.
x [BLACK LEVEL (COMPONENT OUT)]
You can select the black level (setup level) for
the video signals output from the
x [CONTROL FOR HDMI]
COMPONENT VIDEO OUT jacks.
You cannot select this and the setting is not
effective when the system outputs a progressive
signal.
This function is available when you connect the
system and TV that is compatible with the
Control for HDMI function with an HDMI
cable.
[OFF]: You can set the black level of the output
signal to the standard level.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
[ON]: You can raise the standard black level.
Use this when the picture becomes too black.
[OFF]: Off.
x [PAUSE MODE]
x [VOLUME LIMIT]
(DVD VIDEO/DVD-R/DVD-RW only)
activated, loud sound may be output depending
on the volume level of the system. You can
prevent this by limiting the maximum level of
the volume when the System Audio Control
function activates.
You can select the picture in pause mode.
[AUTO]: The picture, including subjects that
move dynamically, is output with no jitter. This
setting is for normal usage.
[FRAME]: The picture, including subjects that
do not move dynamically, is output in high
resolution.
[OFF]: Off.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
US
56
Download from Www.Somanuals.com. All Manuals Search And Download.
x [YCBCR/RGB (HDMI)]
You can select the type of HDMI signal output
from the HDMI OUT jack.
Settings for the audio
[AUDIO SETUP]
[YCB
C
R]: The system outputs YCB
C
R
signals.
x [SPEAKER FORMATION]
[RGB]: The system outputs RGB signals.
Depending on the shape of the room, you may
not be able to install some speakers. For better
surround sound, Sony recommends that first you
decide the position of the speakers.
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
1
Press C/c to select a setting, then
press
[OFF]: The system does not output sound from
the HDMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, DTS, or 96 kHz/24-
bit PCM signals to 48 kHz/16-bit PCM.
.
• [STANDARD]: Select this when you
install all the speakers normally.
• [NO CENTER]: Select this when you
install the front and surround speakers
only.
Note
• When you set the function to other than “DVD/CD”
or “USB,” the system does not output the sound from
the HDMI OUT jack even if you set [AUDIO
(HDMI)] to [ON].
• [NO SURROUND]: Select this when you
install the center and front speakers only.
• [FRONT ONLY]: Select this when you
install the front speakers only.
• [ALL FRONT]: Select this when you
install all the speakers in front of the
listening position.
x [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
• [ALL FRONT - NO CENTER]: Select
this when you install the front and
surround speakers in front of the listening
position.
[SD
]: The system outputs standard
resolution with a black frame.
[HD
]: The system outputs HD resolution
2
Press C/c to select [YES] or [NO], then
with a black frame.
[HD]: The system outputs the HD resolution
without a black frame.
press
.
• [YES]: Continue with [AUTO
CALIBRATION]. Follow the Steps of
[AUTO CALIBRATION] below.
• [NO]: Exit [SPEAKER FORMATION].
[(1920 × 1080i) HD
]: The system outputs
full size HD resolution with a black frame.
[(1920 × 1080i) HD]: The system outputs full
size HD resolution without a black frame.
x [AUTO CALIBRATION]
Note
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
• [JPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 × 480p] or [720 × 480/576p].
1
Connect the calibration mic (supplied)
to the A.CAL MIC jack on the front
panel.
• You can select [(1920 × 1080i) HD
1080i) HD] only when you set [HDMI
] or [(1920 ×
RESOLUTION] in [HDMI SETUP] to [1920 ×
1080i].
Set up the calibration mic at ear level using
a tripod, etc. (not supplied).
• The HDMI signal will stop momentarily when:
– the system is loading or unloading a DATA CD or
DATA DVD.
The front of each speaker should face the
calibration mic, and there should be no
– you connect or remove a USB device.
US
57
Download from Www.Somanuals.com. All Manuals Search And Download.
obstruction between the speakers and the
calibration mic.
x [AUDIO DRC]
You can compress the dynamic range of the
sound track. [AUDIO DRC] is useful for
watching movies at low volume late at night.
[OFF]: No compression of dynamic range.
[STANDARD]: The system reproduces the
sound track with the kind of dynamic range that
the recording engineer intended.
[MAX]: The system compresses dynamic range
fully.
Note
• [AUDIO DRC] works only for Dolby Digital.
Calibration mic
x [TRACK SELECTION]
You can give the sound track which contains the
highest number of channels priority when
multiple audio formats (PCM, DTS, Dolby
Digital, or MPEG audio) are recorded.
[OFF]: Off.
[AUTO]: The system selects the sound track
automatically according to the priority.
Note
2
Press C/c to select [YES], then press
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
the disc, this function may not work.)
.
[AUTO CALIBRATION] starts.
Be quiet during the measurement.
Note
• The environment of the room in which the
system is installed may affect measurements.
When the measurements differ considerably
from the status of the speaker installation,
perform the speaker settings manually by
Other Settings
[SYSTEM SETUP]
x [SCREEN SAVER]
You can reduce the damage to the display device
(ghosting). Press any button (e.g.,
the screen saver.
3
Press C/c to select [YES] or [NO], then
press
.
N) to cancel
4
Disconnect the calibration mic when
the measurement completes correctly.
[ON]: The screen saver image appears if you do
not operate the system for about 15 minutes.
[OFF]: Off.
Note
• The system outputs a loud test sound when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• The measurement for [SUBWOOFER] is always
[YES] and [SPEAKER SETUP] returns to the default
setting when you perform [AUTO CALIBRATION].
x [BACKGROUND]
You can select the background color or picture
on the TV screen.
US
58
Download from Www.Somanuals.com. All Manuals Search And Download.
enter a new 4-digit password, replace the disc in the
unit and press N. When the display for entering your
password appears, enter your new password.
[JACKET PICTURE]: The jacket picture (still
picture) appears, but only when the jacket
picture is already recorded on the disc (CD-
EXTRA, etc.). If the disc does not contain a
jacket picture, a preset picture stored in the
system appears.
[GRAPHICS]: A preset picture stored in the
system appears.
[BLUE]: The background is blue.
[BLACK]: The background is black.
Changing the password
1
2
3
Enter your 4-digit password using the
number buttons, then press
.
Press X/x to select [CHANGE
PASSWORD t], then press
.
Enter a new 4-digit password using the
number buttons, then press
.
x [PARENTAL CONTROL]
If you make a mistake entering your
password, press C before you press
then input the correct number.
The [PARENTAL CONTROL] function allows
you to restrict playback of DVDs that have
ratings. Scenes may be blocked or replaced with
different scenes.
,
4
To confirm your password, re-enter it
using the number buttons, then press
.
1
Enter or re-enter your 4-digit password
using the number buttons, then press
.
x [MULTI-DISC RESUME]
2
3
Press X/x to select [STANDARD], then
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
the same disc.
press
.
Press X/x to select a geographic area
as the playback limitation level, then
press
.
When you select [OTHERS t], select and
enter a standard code from “Parental
the number buttons.
[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.
4
5
Press X/x to select [LEVEL], then press
.
Note
• When the resume playback memory is full, the
resume playback point for the earliest disc is deleted.
Press X/x to select the desired level,
then press
.
The lower the value, the stricter the
limitation.
x [RESET]
You can return the [SETUP] settings other than
[PARENTAL CONTROL] to the default
settings.
To turn off the [PARENTAL CONTROL]
function
Set [LEVEL] to [OFF] in Step 5.
Press C/c to select [YES], then press
.
To play a disc for which [PARENTAL
CONTROL] is set
You can also quit the process and return to the
Control Menu by selecting [NO] here.
Do not press [/1 while resetting the system as
it takes a few seconds to complete.
When you load the disc and press N, the
display for entering your password appears.
Enter your 4-digit password using the number
buttons, then press
.
Note
• The [MEDIA], [INTERVAL], [EFFECT], and
[MULTI/2CH] settings also return to the default
settings.
Tip
• If you forget your password, enter “199703” using
the number buttons, then press . The display will
ask you to enter a new 4-digit password. After you
US
59
Download from Www.Somanuals.com. All Manuals Search And Download.
1)0.9 to 6.9 meters for North American models.
2)0.0 to 6.9 meters for North American models.
Settings for the speakers
[SPEAKER SETUP]
x [DISTANCE (SURROUND)]
Set the distance for the surround speakers from
the listening position.
For the best possible surround sound, place all
speakers at the same distance from the listening
position. The distance can be between 1.0 to 7.0
meters* (0 to 23 ft).
If you cannot place surround speakers at the
same distance, you can move the surround
speakers up to 5.0 meters (16 ft) closer to the
listening position.
You can adjust the speaker settings manually
without performing the Quick Setup.
Select the speakers you will use, set the speaker
distance from your listening position, and then
adjust the sound level for each speaker. You can
adjust the sound level by using the [TEST
TONE] function.
x [CONNECTION]
[FRONT]
[L/R] 3.0 m/10 ft: Set the surround speaker
distance.
* 0.0 to 6.9 meters for North American models.
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no surround speakers are
used.
x [LEVEL (FRONT)]
You can adjust the sound level of the front
speakers, center speaker, and subwoofer. You
can set the parameters from –6.0 dB to 0 dB for
[L/R], and from –6.0 dB to +6.0 dB for
[CENTER] and [SUBWOOFER]. Be sure to set
[TEST TONE] to [ON] for easy adjustment.
[SUBWOOFER]
[YES]
Note
• When you change the [CONNECTION] setting, the
[STANDARD] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to
[STANDARD].
[L/R] 0.0 dB: Set the front speaker level.
[CENTER] 0.0 dB: Set the center speaker level.
[SUBWOOFER] +2.0 dB: Set the subwoofer
level.
x [DISTANCE (FRONT)]
Set the distance of the front and center speakers
from the listening position.
x [LEVEL (SURROUND)]
You can adjust the sound level of the surround
speakers. You can set the parameter from –6.0
dB to +6.0 dB. Set [TEST TONE] to [ON] for
easy adjustment.
For the best possible surround sound, place all
speakers at the same distance from the listening
position. The distance can be between 1.0 to 7.0
1)
meters (3 to 23 ft) for the front speakers, and
2)
0.0 to 7.0 meters (0 to 23 ft) for the center
[L/R] 0.0 dB: Set the surround speaker level.
speaker.
If you cannot place the center speaker at the
same distance, you can move the center speaker
up to 1.6 meters closer to the listening position.
x [TEST TONE]
You can adjust the sound level of the speakers
by using the [TEST TONE] function.
[L/R] 3.0 m/10 ft: Set the front speaker distance.
[CENTER] 3.0 m/10 ft: Set the center speaker
distance.
[OFF]: The test tone is not emitted from the
speakers.
US
60
Download from Www.Somanuals.com. All Manuals Search And Download.
[ON]: The test tone is emitted from each speaker
in sequence while adjusting the level.
Adjust the sound level as follows.
1
2
Set the [TEST TONE] to [ON].
Press C/X/x/c repeatedly to select the
desired speaker and the level, then
press
.
3
4
Repeat Step 2.
Press C/X/x/c to set [TEST TONE] to
[OFF] after adjusting the speaker level.
US
61
Download from Www.Somanuals.com. All Manuals Search And Download.
On adjusting volume
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
Additional Information
Precautions
On power sources
• Unplug the unit from the wall outlet (mains) if you do
not intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
On cleaning
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the system in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the system can overheat and malfunction.
On cleaning discs, disc/lens
cleaners
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
On your TV’s color
• If the speakers should cause your TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from your TV set.
• Do not place the system on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
• Do not install the system near heat sources such as
radiators, or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
• Do not install the system in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the system and discs away from components
with strong magnets, such as microwave ovens, or
large loudspeakers.
On moving the system
• Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
• Do not place heavy objects on the system.
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the unit. Should
this occur, the system may not operate properly. In
this case, remove the disc and leave the system turned
on for about half an hour until the moisture
evaporates.
• If anything falls into the cabinet, unplug the unit and
have it checked by qualified personnel before
operating it any further.
US
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
This system can only play a standard circular
disc. Using neither standard nor circular discs
(e.g., card, heart, or star shape) may cause a
malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
US
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
General
Symptom
Problems and solutions
The power is not turned on.
The remote does not function.
• Check that the AC power cord (mains lead) is connected securely.
• The distance between the remote and the unit is too far.
• The batteries in the remote are weak.
The system does not work
normally.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• Perform the following procedure. (Note that the system parameters, such as
preset stations, return to the default settings.)
1 Press "/1 to turn on the system.
2 Press N, FUNCTION, and "/1 on the unit at the same time. “COLD
RESET” appears in the front panel display.
After performing [AUTO
CALIBRATION], [NONE]
appears in the [Measurement
Complete.] display.
• Do not install the speaker in another room.
Picture
Symptom
Problems and solutions
There is no picture.
• The video input on your TV is not set so that you can view pictures from the
system.
• Check the output method on your system.
There is no picture when you
make an HDMI cable
connection.
• The unit is connected to an input device that is not HDCP (High-bandwidth
Digital Content Protection) compliant (“HDMI” on the front panel does not
light up).
• If the HDMI OUT jack is used for video output, change the type of video signal
Connect your TV and the unit using a video jack other than HDMI OUT, and
switch your TV’s input to the connected video input so that you can see the on-
screen displays. Change the type of video signal output from the HDMI OUT
jack, and switch your TV’s input back to HDMI. If the picture still does not
appear, repeat the Steps and try other options.
There is no picture when you
make a component video cable
connection.
• You have set progressive format but your TV cannot accept the signal in
progressive format. In this case, return the setting to interlace format (the
• You have set [PROGRESSIVE (COMPONENT OUT)] in [VIDEO SETUP] to
this case, disconnect the HDMI cable from the unit and then set to [OFF].
• Even if your TV is compatible with progressive format (525p/625p) signals, the
image may be affected when you set progressive format. In this case, return the
US
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
Picture noise appears.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some DVD programs could affect
picture quality. Connect the unit directly to your TV.
entire TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the The system’s speakers contain magnet parts, so magnetic distortion may occur.
TV screen.
When color irregularity occurs on the TV screen, check the following items.
• Install the speakers at least 0.3 meters (1.0 ft) from your TV set.
• If the color irregularity persists, turn off your TV set once, then turn it on after
15 to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
• Reposition the speakers farther away from your TV set.
Playback picture becomes
distorted.
Sound
Symptom
Problems and solutions
There is no sound.
• The speaker cord is not connected securely.
There is no sound when the
component (digital satellite
receiver, PlayStation 3, etc.) is
connected directly to your TV
via HDMI.
• Check the following status.
– Connect an audio cable from the AUDIO OUT (audio out) jack of your TV
– Disable your TV’s speakers.
There is no sound from the
DIGITAL IN OPTICAL/
COAXIAL jack.
• The sampling frequency of the input stream is more than 48 kHz.
Severe hum or noise is heard.
• Move your TV away from the audio components.
• Clean the disc.
The sound loses stereo effect
when you play a VIDEO CD, a
CD, or an audio file.
• Select stereo sound by pressing AUDIO (page 34).
level is very low from a certain
speaker or all the speakers.
• Depending on the DVD, the output signal may not be the entire 5.1 channel.
• A 2 channel source is being played.
The sound comes from the center • Depending on the disc, the sound may come from the center speaker only.
speaker only.
your TV.
• The HDMI OUT jack does not output Super Audio CD sound.
• Perform the following procedure.
1 Turn the system off and on again.
2 Turn the connected component off and on again.
3 Disconnect and then connect the HDMI cable again.
The sound of files played from a • The bit rate used when encoding the audio files was low. Transfer audio files
DATA CD/DATA DVD/USB
device is distorted.
encoded with higher bit rates onto the DATA CD/DATA DVD/USB device.
US
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
There is noise or the sound skips • Copy the files to your computer, format the USB device in FAT12, FAT16, or
while playing a USB device.
FAT32 format, and transfer the files to the USB device again.
Disc playback
Symptom
Problems and solutions
A disc does not play.
• The region code on the DVD does not match the system.
• Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
The language for the sound track • Set the language via the disc’s menu.
or subtitle cannot be changed.
A disc does not start playing
from the beginning.
• While in stop mode, press x on the unit or the remote and then start playback
A DATA CD/DATA DVD
cannot be played.
• The DATA CD is not recorded in ISO 9660 Level 1/Level 2, or Joliet.
• The DATA DVD is not recorded in UDF (Universal Disk Format).
A file cannot be played.
• The extension of the file name or file format is not correct. See “Playable Discs/
• The system can play to a depth of 8 folders only.
• Check that the number of folders is 200 or less.
• Check that the number of audio files/JPEG image files in the folder is 150 or
less.
A JPEG image file cannot be
viewed.
• The JPEG image file is larger than 3,072 (width) × 2,048 (height) pixels in
normal format, or more than 2,000,000 pixels in progressive format which is
mainly used on Internet Web sites.
A video file cannot be played.
• The video file is larger than 720 (width) × 576 (height).
The titles of folders/files/file
names are not displayed
correctly.
• The system can only display numbers and letters of the alphabet. Other
characters are displayed as [_].
File names are not displayed
properly.
• The character codes that can be displayed by this system are numbers and letters
of the alphabet only. Other characters are not displayed correctly.
USB playback
Symptom
Problems and solutions
A USB device does not start
playing from the beginning.
• While in stop mode, press x on the unit or the remote and then start playback
A USB device cannot be played. • USB devices formatted with file systems other than FAT12, FAT16, or FAT32
are unsupported.*
* This system supports FAT12, FAT16, and FAT32, but some USB devices
may not support all of these. For details, refer to the operating instructions of
the USB device or contact the manufacturer.
• If you use a partitioned USB device, only audio files on the first partition can
be played.
US
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
A file cannot be played.
• The extension of the file name or file format is not correct. See “Playable Discs/
• The system can play to a depth of 8 folders only.
• Check that the number of folders is 200 or less.
• Check that the number of audio files/JPEG image files in the folder is 150 or
less.
• Files that are encrypted or protected by passwords, etc. cannot be played.
A JPEG image file cannot be
viewed.
• The JPEG image file is larger than 3,072 (width) × 2,048 (height) pixels in
normal format, or more than 2,000,000 pixels in progressive format which is
mainly used on Internet Web sites.
A video file cannot be played.
• The video file is larger than 720 (width) × 576 (height).
A WMA file cannot be played. • A WMA file that is in WMA DRM, WMA Lossless, or WMA PRO format
cannot be played.
An AAC file cannot be played. • An AAC file that is in AAC DRM or AAC Lossless format cannot be played.
The titles of folders/files/file
names are not displayed
correctly.
• The system can only display numbers and letters of the alphabet. Other
characters are displayed as [_].
File names are not displayed
properly.
• The character codes that can be displayed by this system are numbers and letters
of the alphabet only. Other characters are not displayed correctly.
It takes time until playback
starts.
• After the system reads all files on the USB device, playback may take more
time than usual if:
– there are many folders or files on the USB device.
– the folder or file organization structure is very complex.
– the memory capacity is very large.
– the file size is extremely large.
– the internal memory is fragmented.
• The system is playing an audio file in AAC format.
A USB device which has been • It may be recorded in an unsupported format. If so, first take the precaution of
used on another device does not backing up important files on the USB device by copying them to your
work.
computer hard disk. Next, format the USB device in FAT12, FAT16, or FAT32
format, and transfer the files to the USB device again.
Audio track/file transfer
Symptom
Problems and solutions
You cannot start transferring
onto a USB device.
• The following problems may have occurred.
– The USB device is full.
– The number of audio files and folders on the USB device has reached the
upper limit.
– The USB device is write-protected.
Transferring stops before it is
finished.
• The communication speed of the USB device is extremely slow. Connect a
USB device that this system can play.
• If the transferring and erasing operations are repeated multiple times, the file
structure within the USB device becomes complex. Follow the procedure in the
operating instructions of the USB device to format the USB device. If the
problem persists, contact your nearest Sony dealer.
• The USB device is full.
• The number of audio files and folders on the USB device has reached the upper
limit.
US
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
Transferring to a USB device
results in an error.
• The USB device was disconnected or the power was turned off during erasing.
Delete the partially-erased file. If this does not fix the problem, the USB device
may be broken. Follow the procedure in the operating instructions of the USB
device to format the USB device. If the problem persists, contact your nearest
Sony dealer.
Audio files or folders on the
USB device cannot be erased.
• Check if the USB device is write-protected.
Tuner
Symptom
Problems and solutions
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna
in.
(aerial) or connect an external antenna (aerial) if necessary.
• The signal strength of the stations is too weak (when tuning in with automatic
tuning). Use direct tuning.
FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial).
Control for HDMI
Symptom
Problems and solutions
does not work.
• Make sure that the connected component is compatible with the [CONTROL
FOR HDMI] function.
• Check the connected component’s setting for the Control for HDMI function.
Refer to the operating instructions of the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
No sound is output from the
system and TV while using the
System Audio Control function.
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
Messages
Symptom
Problems and solutions
“PROTECTOR” and “PUSH
POWER” appear alternately.
• Press "/1 to turn off the system, and check the following items after
“STANDBY” disappears.
– Are the + and – speaker cords short-circuited?
– Is anything blocking the ventilation holes of the system?
– After checking the above items and fixing any problems, turn on the system.
If the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
“OVERLOAD,” “REMOVE
USB,” then “PUSH POWER”
appear.
• A problem has been detected with the level of electrical current from the
(USB) port. Turn off the system and remove the USB device from the
(USB) port. Make sure there is no problem with the USB device. If this display
pattern persists, contact your nearest Sony dealer.
US
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
“LOCKED” appears and a disc • Contact your Sony dealer or local authorized Sony service facility.
cannot be ejected.
“DATA ERROR” appears.
• The file you want to play is broken.
• The file format does not match the extension of the file name. See “Playable
• The JPEG image file format does not conform to DCF.
“READING” is displayed for a • The reading process can take a long time if:
long time while playing.
– there are many folders or files on the USB device.
– the folder or file organization structure is very complex.
– the memory capacity is very large.
– the internal memory is fragmented.
US
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis Function
Specifications
AUDIO POWER SPECIFICATIONS
(When letters/numbers appear in the
display)
for the U.S. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
Front L + Front R
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 84 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
C:13:50
Amplifier Section
U.S. models:
POWER OUTPUT (reference):
Front L/Front R/Center/
First 3
Cause and/or corrective action
characters of
the service
number
Surround L/Surround R:
167 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 watts (at 3
ohms, 80 Hz)
C 13
The disc is dirty.
,Clean the disc with a soft cloth
Other models:
POWER OUTPUT (rated):
Front L + Front R
E XX
To prevent a malfunction, the
system has performed the self-
diagnosis function.
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
(XX is a
number)
POWER OUTPUT (reference):
Front L/Front R/Center/
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
Example: E 61 10
Surround L/Surround R:
167 watts (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 watts (at 3
ohms, 80 Hz)
When the version number
appears on the TV screen
Inputs (Analog)
TV/CABLE (AUDIO IN) Sensitivity: 450/250 mV
AUDIO IN
Sensitivity: 250/125 mV
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
Inputs (Digital)
TV/CABLE (COAXIAL IN/OPTICAL IN)
Impedance: 75 ohms/-
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
Super Audio CD/DVD System
VER.X.XX
Laser Diode Properties
Emission Duration:
Continuous
Laser Output: Less than
44.6 μW
* This output is the value measurement at a distance
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
US
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Signal format system
NTSC
Subwoofer
USB Section
(USB) port:
Maximum current:
DAV-DZ170/DAV-DZ171 (SS-WS102)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Subwoofer Bass reflex
180 mm (7 1/8 in) cone type
3 ohms
225 mm × 395 mm × 315
mm (8 7/8 in × 15 5/8 in ×
12 1/2 in) (w/h/d)
500 mA
Tuner Section
System
PLL quartz-locked digital
synthesizer
Tuning range
North American models: 87.5 MHz - 108.0 MHz
(100 kHz step)
Mass (approx.)
6.5 kg (14 lb 6 oz)
DAV-DZ175 (SS-WS101)
Other models:
87.5 MHz - 108.0 MHz (50
kHz step)
FM wire antenna (aerial)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Subwoofer Bass reflex
160 mm (6 3/8 in) cone type
3 ohms
Antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
169 mm × 300 mm × 320
mm (6 3/4 in × 11 7/8 in ×
12 5/8 in) (w/h/d)
10.7 MHz
Video Section
Outputs
Mass (approx.)
5.3 kg (11 lb 11 oz)
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
General
Power requirements
Power consumption
120 V AC, 60 Hz
On: 170 W
Standby: 0.2 W*
HDMI OUT: Type A (19
pin)
* Valid when the system is in the following status:
– “DEMO” is set to “OFF.”
– [CONTROL FOR HDMI] is set to [OFF].
Speakers
Dimensions (approx.)
430 mm × 66 mm × 385
mm (17 in × 2 5/8 in ×
15 1/4 in) (w/h/d) incl.
projecting parts
Front (SS-TS102)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Full range Bass reflex
65 mm (2 5/8 in) cone type
3 ohms
103 mm × 164 mm × 85
mm (4 1/8 in × 6 1/2 in ×
3 3/8 in) (w/h/d)
Mass (approx.)
4.4 kg (9 lb 12 oz)
Supported file format
MP3 (MPEG 1 Audio Layer-3)
Mass (approx.)
0.5 kg (1 lb 2 oz)
File Extension:
mp3
Bitrate:
Sampling frequencies:
32 kbps - 320 kbps
32/44.1/48 kHz
Center (SS-CT101)
Speaker system
Full range Bass reflex,
Magnetically Shielded
65 mm (2 5/8 in) cone type
3 ohms
265 mm × 94 mm × 70 mm
(10 1/2 in × 3 3/4 in × 2 7/8 in)
(w/h/d)
WMA (USB device only)
File Extension:
Bitrate:
Sampling frequencies:
Speaker unit
Rated impedance
Dimensions (approx.)
wma
48 kbps - 192 kbps
44.1 kHz
AAC (USB device only)
File Extension:
m4a
Mass (approx.)
0.6 kg (1 lb 6 oz)
Bitrate:
Sampling frequencies:
48 kbps - 320 kbps
44.1 kHz
Surround (SS-TS102)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Full range Bass reflex
65 mm (2 5/8 in) cone type
3 ohms
103 mm × 164 mm × 85
mm (4 1/8 in × 6 1/2 in × 3 3/
8 in) (w/h/d)
MPEG4
File format:
File Extension:
Video codec:
MP4 File Format
mp4/m4v
MPEG4 Simple Profile
(AVC is not compatible.)
4 Mbps
Bitrate:
Mass (approx.)
0.5 kg (1 lb 2 oz)
Frame rate:
Resolution:
Audio codec:
30 fps
720 × 576
AAC-LC (HE-AAC is not
compatible.)
US
71
Download from Www.Somanuals.com. All Manuals Search And Download.
DRM:
Not compatible
Design and specifications are subject to change
without notice.
• Standby power consumption 0.2 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
US
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Priority of File Types
The table below describes the playback priority of file types under the [MEDIA] setting.
File type on a disc or USB
device
[MEDIA] setting
[VIDEO]
Disc
[MUSIC/
PHOTO]
[PHOTO]
[MUSIC]
USB device
Disc
Disc/USB
device
Disc/USB
device
Video files only
Video files
Video files
Video files
Video files
Video files
JPEG image files only
JPEG image
files
JPEG image
files
JPEG image
files
JPEG image
files
JPEG image
files
Audio files only
MP3 files
Audio files
Video files
MP3 files
Audio files*
Audio files*
Video files
Video files and JPEG image Video files
files
JPEG image
files
JPEG image
files
Video files and audio files Video files
Video files
MP3 files
Audio files*
Audio files*
Audio files*
Audio files and JPEG image MP3 files and Audio files
MP3 files and JPEG image
files
JPEG image
files with slide
show
JPEG image
files with slide
show
files
Video files, audio files, and Video files
JPEG image files
Video files
MP3 files and JPEG image
Audio files*
JPEG image
files with slide
show
files
* When using a disc, you can play MP3 files only.
US
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1525 Telugu
1527 Tajik
1528 Thai
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
Parental Control Area Code List
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2092 China
2115 Denmark
2501 Singapore
US
74
Download from Www.Somanuals.com. All Manuals Search And Download.
(1)
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|