Sharp TV DVD Combo LC 32DV28UT User Manual

LC-26DV28UT  
LC-32DV28UT  
COMBINATION LIQUID CRYSTAL TELEVISION  
AND DVD/CD PLAYER  
COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD  
COMBINACION TELEVISOR CON PANTALLA DE  
CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS  
OPERATION MANUAL  
MODE D’EMPLOI  
MANUAL DE OPERACIÓN  
IMPORTANT  
IMPORTANT  
:
:
Please read this operation manual before starting operating the equipment.  
Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.  
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LC-26DV28UT  
LC-32DV28UT  
COMBINATION LIQUID CRYSTAL TELEVISION  
AND DVD/CD PLAYER  
ENGLISH  
OPERATION MANUAL  
IMPORTANT:  
Model No.:  
Serial No.:  
To aid reporting in case of loss or theft, please record  
the TV/DVD’s model and serial numbers in the space  
provided. The numbers are located at the rear of the  
TV/DVD.  
Location of the required Marking  
CLASS 1  
LASER PRODUCT  
The rating sheet and the safety caution are on  
the rear of the unit.  
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.  
COMPLIES WITH FDA PERFORMANCE STANDARDS FOR LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT  
TO LASER NOTICE NO. 50, DATED JUNE 24, 2007.  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO  
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
The lightning flash with arrow-head  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltage” within the product’s  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within a  
triangle is intended to alert the user  
to the presence of important  
operating and maintenance  
(servicing) instructions in the  
literature accompanying the product.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT.  
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly  
approved by the manufacturer could void the user’s authority to operate this equipment.  
CAUTION:  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other  
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded  
cables and connectors for connections.  
“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of  
the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”  
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount  
of mercury. Disposal of these materials may be regulated due to environmental  
considerations. For disposal or recycling information, please contact your local  
DECLARATION OF CONFORMITY  
SHARP COMBINATION LIQUID CRYSTAL TELEVISION AND DVD CD PLAYER, MODEL LC-26DV28UT/LC-32DV28UT.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
RESPONSIBLE PARTY:  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
TEL: 1-800-BE-SHARP  
INFORMATION:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
—Reorient or relocate the receiving antenna.  
—Increase the separation between the equipment and receiver.  
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
—Consult the dealer or an experienced radio/TV technician for help.  
License information  
* This product incorporates copy protection technology that is protected by U.S. and other intellectual property rights. The  
use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi Corporation. Reverse  
engineering or disassembly is prohibited.  
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
* DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.  
* This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology  
outside of this product is prohibited without a license from Microsoft.  
* “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.”  
* Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS  
and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product  
includes software. © DTS, Inc. All Rights Reserved.  
* Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy  
efficiency.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player.  
To ensure safety and many years of trouble-free operation of your product, please read the Important  
Safety Instructions carefully before using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,  
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following  
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of  
your Liquid Crystal Television, please read the following precautions carefully before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power  
company. For products intended to operate from battery power, or other sources, refer to the operating  
instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any  
kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to restore the  
product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform  
safety checks to determine that the product is in proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according  
to the method recommended by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL  
ELECTRICAL CODE, ANSI/NFPA 70  
• Outdoor Antenna Grounding — If an outside antenna is  
connected to the television equipment, be sure the antenna  
system is grounded so as to provide some protection against  
voltage surges and built-up static charges. Article 810 of the  
National Electrical Code, ANSI/NFPA 70, provides information  
with regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
ANTENNA LEAD  
IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC — NATIONAL ELECTRICAL CODE  
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement; or near a swimming pool; and the like.  
Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can  
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,  
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,  
be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.  
• Selecting the location — Select a place with no direct sunlight and good ventilation.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these  
vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not  
place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product  
is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack,  
unless proper ventilation is provided or the manufacturer’s instructions are followed.  
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or  
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.  
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that  
this does not affect the performance of your product.  
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent  
damage to the equipment due to lightning and power-line surges.  
Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
• To prevent fire, never place any type of candle or flames on the top or near the TV set.  
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.  
• Do not display a still picture for a long time, as this could cause an afterimage to remain.  
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or  
electric shock. Exercise special caution when using the product around children.  
• CONDENSATION — Moisture will form in the operating section of the player if the player is brought from cool  
surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player’s  
performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before  
switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the  
summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.  
DISC SLOT — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.  
• LASER BEAM — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of  
the laser beam. Doing so may cause sight damage.  
• DISC — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
Precautions when transporting the TV  
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always  
carry the TV by two people holding it with two hands — one hand on each side of the TV.  
Caring for the Cabinet  
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.  
Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.  
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.  
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water  
and thoroughly wrung out, and then wipe with a soft dry cloth.  
• The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as these may deform the  
cabinet and cause the paint to peel off.  
• Do not apply insecticides or other volatile liquids.  
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers  
inside the plastic may cause the cabinet to deform and cause the paint to peel off.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Caring for the Liquid Crystal panel  
• Turn off the main power and unplug the AC cord from the wall outlet before handling.  
• Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).  
To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/  
dry sheet type cloth, etc.). This may damage the surface of the display panel.  
• Wiping with a hard cloth or using strong force may scratch the surface of the display panel.  
• Use a soft damp cloth to gently wipe the display panel when it is really dirty.  
(It may scratch the surface of the display panel when wiped strongly.)  
• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.  
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are  
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP  
CHILD SAFETY  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
• The home theater entertainment experience is a growing trend and larger flat panel  
displays are popular purchases. However, flat panel displays are not always supported on  
the proper stands or installed according to the manufacturer’s recommendations.  
• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,  
desks, speakers, chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
• The consumer electronics industry is committed to making home entertainment enjoyable  
and safe.  
TUNE INTO SAFETY  
• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe  
installation and use of your flat panel display.  
• Carefully read and understand all enclosed instructions for proper use of this product.  
• Don’t allow children to climb on or play with furniture and television sets.  
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a  
chest of drawers.  
• Remember that children can become excited while watching a program, especially on  
a “larger than life” flat panel display. Care should be taken to place or install the display  
where it cannot be pushed, pulled over, or knocked down.  
• Care should be taken to route all cords and cables connected to the flat panel display  
so that they cannot be pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL  
DISPLAY, ALWAYS:  
• Use a mount that has been recommended by the display manufacturer and/or listed by  
an independent laboratory (such as UL, CSA, ETL).  
• Follow all instructions supplied by the display and wall mount manufacturers.  
• If you have any doubts about your ability to safely install your flat panel display, contact  
your retailer about professional installation.  
• Make sure that the wall where you are mounting the display is appropriate. Some wall  
mounts are not designed to be mounted to walls with steel studs or old cinder block  
construction. If you are unsure, contact a professional installer.  
• A minimum of two people are required for installation. Flat panel displays can be heavy.  
Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.  
consumer electronics industry. More than 2,200 companies enjoy the benefits of CEA  
membership, including legislative advocacy, market research, technical training and  
education, industry promotion and the fostering of business and strategic relationships.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
Discs which can be played back  
Discs which cannot be played back  
In this unit, use only discs that meet the standard, such  
as those bearing the below logo marks on the disc label  
surface. If you use a non-standard disc, we cannot  
guarantee playback. Even if such a disc can be played back,  
we cannot guarantee the image or sound quality.  
The DVD logo is a registered trademark.  
The discs listed below cannot be played back in general.  
Even if one of these can be played back, it may not be  
played back correctly. If a disc is played back by mistake,  
extensively loud sounds may blow the speakers or may  
damage the hearing of those in hearing range. Do not  
playback the discs listed below.  
CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA,  
SACD, PD, DVD-ROM, SVCD, CVD, VCD, DVD-RAM,  
DVD+R/RW, DVD audio, HD DVD, Blu-ray, etc.  
Media type  
Logo mark  
DVD-Video  
DVD-R/RW  
The following DVD-Video discs may not be played back  
on this unit:  
• DVD-Video that do not have the region number “1” or  
“ALL”.  
(Video format only)  
• Prohibited or business-use DVD-Video.  
Audio CD*  
CD-R/CD-RWs cannot be played back for the following  
reasons.  
• Compatibility of the disc and this unit.  
• Compatibility of the disc and the recorder used.  
• Unfinalised discs.  
CD-R/CD-RW (CD-DA, MP3, WMA  
or JPEG format)  
Never use the following discs or accessories. It may  
cause serious damage to the TV/DVD.  
• Irregular shaped discs such as card shaped, heart shaped  
• The ring protector or other disc accessories  
• The 8 cm disc adapter  
* This unit is designed to playback music Compact Discs  
(CD) that conform to the CD standard. CDs that contain  
(copy-restriction) signals to protect copyrights cannot be  
played back.  
• Stickered or papered discs  
• Some CD-R/RWs and DVD-R/RW can not be played back  
depending on the recording conditions.  
• Discs with scotch tape, glue or other remains of labels  
• 8 cm discs can be played without an adapter.  
Title/Chapter/Track  
A DVD-Video has large partitions called “Titles”, and smaller  
partitions within them called “Chapters”.  
Region management information  
This unit is designed and manufactured to support the  
region management information that is recorded on a DVD  
disc. If the region number written on the DVD disc does not  
correspond to the region number of this unit, this unit cannot  
play that disc.  
A audio CD has other partitions called “Tracks”.  
A number is allotted to each partition and these numbers are  
called “title numbers”, “chapter numbers” or “track numbers”.  
DVD DISC  
• The region number of this unit is “1”.  
TITLE 1  
CHAPTER 1  
TITLE 2  
• The unit will play DVD-Video discs marked with labels  
containing “1” or “ALL”.  
CHAPTER 2  
CHAPTER 1  
CHAPTER 2  
CHAPTER 3  
Example:  
ALL  
1
Audio CD  
Operating DVD-Video  
• Some operations of DVD-Video may be prohibited by the  
manufacturer, or some operation methods or functions of  
the DVD-Video may be different from the description in  
this manual.  
TRACK  
1
TRACK  
2
TRACK  
3
TRACK  
4
TRACK  
5
• If you attempt an operation that is prohibited by either the  
disc or the unit, “  
” will  
This operation can’t be performed  
appear on the TV screen. For operations prohibited by the  
disc, see the information that came with the disc.  
• When the menu screen or the operation guide appears  
during disc playback, follow the displayed information.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
Title/Chapter/Track PC-created disc  
Playing MP3 (MPEG-1 Audio Layer-3) files  
• You may not be able to play discs recorded using a  
personal computer or recorder for disc compatibilities,  
scratches or marks on the disc, dirty lenses of the unit or  
condensation and so on.  
• This unit is compatible with audio files recorded with the  
following sampling frequency: 32 kHz, 44.1 kHz and 48  
kHz.  
• Files with extensions .mp3 or .MP3 can be played.  
• For the best quality of sound, 128 kbps or higher bit rate is  
recommended.  
• Discs recorded using a personal computer may not be  
playable in this unit due to the setting of the application  
software used to create the disc. In these particular  
instances, check with the software publisher for more  
detailed information.  
Copy Control CD (CCCD)  
This product is designed to conform to CD-DA (Compact  
Disc Digital Audio). Any other discs than CD-DA are not  
guaranteed with their operation and performance in this  
product.  
Playable files  
• ISO 9660 Level 1 or 2 compliant.  
Romeo and Joliet file systems are both compatible with  
this player.  
Handling discs  
• DRM (Digital Rights Management) protected files will not  
play in this player.  
Removing the Disc from its case  
Be sure to hold the edge of disc. Do not touch the surface of  
the disc.  
For detailed information, please see the instruction  
manuals or help files that came with your PC and/or  
software.  
Pick up the disc gently from the case.  
• Do not scratch the disc.  
• File structure (may differ): Up to 299 folders on a disc; up  
to 648 files within each folder  
• Do not get dirt on the surface of the disc.  
• Do not stick a label or adhesive tape on the disc.  
• Do not drop or bend the disc.  
• Folder and file names can be displayed as long as they  
are typed in alphabets and numbers. If folder and file  
names are other than alphabets and numbers, they may  
be replaced and displayed like as “_”. Garbled characters  
may also be displayed in this case.  
Playing image files  
JPEG files recorded in DVD-R/-RW and CD-R/-RW can be  
played.  
Storing discs  
• Store the disc in the case to avoid any risk of scratches,  
dirt or damage.  
JPEG file compatibility  
• Image files should be saved in JPEG format.  
• Files recorded in Fuji Colour CD, Kodak Picture CD or  
CD-R/-RW can be played.  
• Do not leave the disc exposed to direct sunlight or in hot  
or humid places.  
• Compatible formats: Baseline JPEG and EXIF 2.2* still  
image files up to a resolution of 3072 x 2048.  
*File format used by digital still cameras.  
Cleaning discs  
Wipe the disc with a clean, dry cloth from the center outward  
toward the edges.  
• Files with extensions .jpg or .JPG can be played.  
• Progressive JPEG formatted files do not work.  
• It may take some more time to start to play larger files than  
usual.  
• Do not wipe the disc in a circular motion around the  
center.  
• Do not use liquid or aerosol cleaners.  
• JPEG files with different aspect ratio may be displayed  
with black bands (either vertical or horizontal).  
Playing Audio files  
WMA and MP3 files recoded in DVD-R/-RW, CD-R/-RW can  
be played.  
Windows Media Audio (WMA) compatibility  
Note on copyright  
• WMA is an acronym for Windows Media Audio and  
refers to an audio compression technology developed by  
Microsoft Corporation.  
• Unauthorized recording of copyrighted television  
programs, films, video cassettes and other materials may  
infringe the rights of copyright owners and be contrary to  
copyright laws.  
• You can encode your files by using Windows Media  
Player Ver.7, 7.1, Windows Media Player for Windows XP  
or Windows Media Player 9 Series.  
• When encoding your files, use only applications approved  
by Microsoft Corporation. If you use non-approved  
application, it may not work properly.  
• This unit is compatible with audio files recorded with the  
following sampling frequency: 32 kHz, 44.1 kHz and 48  
kHz.  
• It is not compatible with loss-less encoding.  
• Files with extensions .wma or .WMA can be played.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied accessories  
Make sure the following accessories are provided with the product.  
Remote control unit  
(×1)  
“AA” size battery (×2)  
Page 10  
AC cord (×1)  
Page 9  
Stand unit (×1)  
Page 8  
Operation manual (×1)  
Page 10  
NOTE  
• Always use the AC cord supplied with the TV/DVD.  
QUICK REFERENCE  
Attaching the stand  
• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.  
Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.  
CAUTION  
• Attach the stand in the correct direction.  
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV/DVD falling over.  
Confirm the 8 screws supplied with the TV/DVD.  
1
3
1
2
Insert the stand into the openings on the bottom of the  
TV/DVD.  
Short screws (X4)  
Long screws (X4)  
(used in step 2)  
(used in step 3)  
Insert and tighten the 4 screws into the 4 holes on the  
rear of the TV/DVD.  
Hex key  
Screw  
Remove the covering sheet of the stand.  
2
1
2
Attach the base to the post.  
Attach the base to the 4 screws into the 4 holes on the  
bottom of the base.  
Hex key  
Screw  
Soft cushion  
(Illustration is LC-26DV28UT.)  
For protection, sheets  
are covering the product.  
Please remove these  
sheets before use.  
4
NOTE  
• To detach the stand, perform the step in reverse order.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
QUICK INSTALLATION TIPS  
Attach your antenna to the back of the TV/DVD.  
1
(See page 14.)  
2
Connect the AC plug for the TV/DVD into the wall outlet.  
6
3
2
1
(Illustration is LC-26DV28UT.)  
AC outlet  
• Place the TV/DVD close to the AC outlet, and keep the  
power plug within reach.  
NOTE  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH UN-INSULATED PARTS OF ANY CABLES  
WITH THE AC CORD CONNECTED.  
How to turn on the TV/DVD for the first time.  
3
A) Press POWER on TV/DVD.  
POWER  
(Illustration is LC-26DV28UT.)  
B)  
POWER indicator on the front of the TV/DVD lights  
GREEN.  
(Illustration is LC-26DV28UT.)  
POWER indicator  
NOTE  
• Speaker cannot be detached from the TV/DVD.  
• TV/DVD angle cannot be adjusted.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.  
1 Open the battery cover.  
2 Insert two “AA” size batteries  
3 Close the battery cover.  
(supplied with the product).  
• Place the batteries with their terminals  
corresponding to the (+) and (–)  
indications in the battery compartment.  
NOTE  
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.  
• Do not mix batteries of different types. Different types of batteries have different characteristics.  
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical  
leakage in old batteries.  
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can  
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.  
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.  
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.  
17” (5 m)  
(Illustration is LC-26DV28UT.)  
Remote control  
sensor  
30°  
30°  
IMPORTANT:  
The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.  
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the  
power on.  
IMPORTANT:  
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE  
INSTALLATION STEPS.  
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT INFORMATION................................... 1  
License information ................................................ 2  
DEAR SHARP CUSTOMER ..................................... 3  
IMPORTANT SAFETY INSTRUCTIONS.................. 3  
Disc........................................................................... 6  
Supplied accessories ............................................. 8  
QUICK REFERENCE................................................ 8  
Attaching the stand.............................................. 8  
Contents................................................................. 11  
Part names............................................................. 12  
TV/DVD (Front).................................................. 12  
TV/DVD (Left).................................................... 12  
TV/DVD (Rear) .................................................. 12  
Remote control unit............................................ 13  
Preparation ............................................................ 14  
Using the remote control unit............................. 14  
Cautions regarding remote control unit.............. 14  
Antennas ........................................................... 14  
Using external equipment .................................... 15  
Experiencing HD images ................................... 15  
Types of Connection.......................................... 15  
Displaying an External Equipment Image .......... 15  
Connecting to External Equipment ..................... 16  
Connecting a Blu-ray Disc/DVD Player or HD  
Watching the DVD ................................................. 29  
Preparation........................................................ 29  
Turning on the power......................................... 29  
Select the DVD mode ........................................ 29  
Turning off the power......................................... 29  
Playback procedure........................................... 29  
Status display of DVD disc................................. 29  
Special playback ............................................... 30  
Zooming ............................................................ 30  
Locating desired scene...................................... 30  
A-B Repeat playback......................................... 30  
Marking desired scenes..................................... 31  
Changing angles................................................ 31  
Changing soundtrack language......................... 31  
Subtitles............................................................. 31  
Using HOME MENU.......................................... 32  
Play mode.......................................................... 32  
Audio Settings menu.......................................... 33  
Video Adjust menu ............................................ 34  
Function setup....................................................... 34  
Customizing The Function Settings ................... 34  
Parental Control................................................. 36  
Appendix................................................................ 37  
Language Code List .......................................... 37  
Country/Area Code List ..................................... 37  
Troubleshooting................................................. 38  
Troubleshooting-Error Message ........................ 38  
Troubleshooting-PC mode................................. 38  
Troubleshooting-DVD........................................ 39  
Specifications .................................................... 40  
Calling for Service................................................. 41  
LIMITED WARRANTY ............................................ 41  
Cable/Satellite Set-top Box.............................. 16  
Connecting a VCR, Game Console, Camcorder or  
Cable/Satellite Set-top Box.............................. 17  
Connecting an Audio Amplifier .......................... 18  
Connecting a PC................................................ 18  
Displaying an image from a PC.......................... 19  
PC compatibility chart........................................ 19  
Watching TV........................................................... 20  
Preparation........................................................ 20  
Turning on the power......................................... 20  
Auto Setup......................................................... 20  
Select the TV mode ........................................... 20  
Turning off the power......................................... 20  
Changing channels............................................ 20  
Auto Ch Memory................................................ 21  
Skipping stored channel .................................... 21  
Clear All............................................................. 21  
Display the channel information......................... 21  
Setting MTS/SAP stereo mode.......................... 21  
Selecting the digital audio language .................. 22  
View mode for 4:3 programs.............................. 22  
View mode for HD programs.............................. 22  
Labeling channels.............................................. 22  
Closed captions and digital closed captions...... 23  
Caption setup .................................................... 24  
Password setting for parental control................. 24  
How to enter the Lock menu.............................. 24  
To clear the all V-Chip settings .......................... 24  
Parental control (V-CHIP) .................................. 25  
TV Parental Guidelines (TV Guidelines) ........... 25  
Voluntary movie rating system (MPAA) ............. 25  
Canadian rating systems ................................... 26  
Canadian English ratings................................... 26  
Canadian French ratings ................................... 26  
How to temporarily release the V-Chip block..... 26  
Other convenience functions............................... 27  
Menu operation buttons..................................... 27  
Quick guide for MENU operation ....................... 27  
Dimensional Drawings  
• The dimensional drawings for the TV/DVD set are  
shown on the inside back cover.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
TV/DVD (Front)  
(Illustration is LC-26DV28UT.)  
POWER indicator  
NOTE  
• The buttons on the main unit have the same  
functions as the same buttons on the remote  
control. Fundamentally, this operation manual  
provides a description based on operation  
using the remote control.  
Remote control sensor  
TV/DVD (Left)  
Disc slot  
EJECT button  
Disc slot  
Volume (VOL+/–)//buttons  
Channel //PLAY button  
Channel //STOP button  
MENU button  
INPUT/ENTER button  
POWER button  
(LC-26DV28UT)  
(LC-32DV28UT)  
TV/DVD (Rear)  
(LC-26DV28UT)  
(LC-32DV28UT)  
6
3
2
1
6
3
2
1
INPUT 6 terminals  
OUTPUT terminals  
INPUT 2/3 terminals  
ANT./CABLE in  
INPUT 1 terminals  
6
3
2
1
(Illustration is LC-26DV28UT.)  
AC INPUT  
INPUT 5 terminal  
INPUT 4 terminal  
NOTE  
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.  
• The examples used throughout this manual are based on the LC-26DV28UT model.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
4
5
REV : Review playback. (See page 30.)  
Remote control unit  
SKIP /: Skip chapter to reverse or forward direction.  
(See page 30.)  
6
7
STILL/PAUSE: Still picture of DVD / Pause CD sound.  
14 15 16  
(See page 30.)  
SETUP/TV MENU: TV mode - Display menu of TV /  
DVD mode - Call up initial setup mode. (See pages 27,  
34.)  
1
17  
18  
19  
8
9
////ENTER: Select a desired item on the screen.  
SLOW  
/
: Reverse/Forward -slow motion. (See  
page 30.)  
EXIT/CANCEL: Turn off the menu screen / Reset  
20  
information in the menu.  
2
3
10 PLAY MODE: Select playback mode. (See page 32.)  
11 AUDIO: Switch the sound of TV / Change sound track  
21  
language. (See pages 21, 31.)  
22  
23  
12 RETURN: Turn off the DVD setup menu screen.  
4
13 A-B REPEAT: Repeat playback between A and B. (See  
5
6
24  
page 30.)  
25  
14 DISPLAY: Display the current channel (or input source)  
information on the screen. (See pages 21, 29.)  
7
8
26  
27  
15 TV/DVD: Switch between TV/AV and DVD. (See pages  
20, 29.)  
16 EJECT: Eject the disc. (See page 29.)  
9
17 SLEEP: Allows you to set a time when the TV/DVD  
automatically switches to standby. Each time you press  
this button, the remaining time setting switches by 10  
minutes up to 2 hours. This display will disappear after  
a few seconds, and the sleep timer automatically starts  
counting down.  
28  
29  
10  
11  
12  
30  
• If you want to adjust the sleep timer again, you can  
press this button repeatedly then change the time  
setting.  
31  
13  
• Select “Off” by pressing SLEEP repeatedly to cancel  
the sleep timer.  
• The TV/DVD will enter the standby mode when the  
remaining time reaches zero.  
18 INPUT: Select input source. (See page 15.)  
19 VIEW MODE: Select the screen size. (See page 22.)  
NOTE  
20 VOL +/–: Set the volume.  
• When using the remote control unit, point it at the TV/DVD.  
(See page 10.)  
• To increase the volume, press VOL+.  
• To decrease the volume, press VOL–.  
21 CH  
/
: Select the channel. (See page 20.)  
There is a protective film covering the face of the remote  
control. Please remove this film before use.  
22 MUTE: Mute the sound. “Mute” will be displayed on the  
screen, and the sound is silenced. The muting feature  
can be released by pressing this button again or one of  
VOL +/–.  
• Sound via the COAXIAL DIGITAL AUDIO OUTPUT  
terminal is not muted.  
23 FWD: Fast forward playback. (See page 30.)  
24 PLAY: Playback. (See page 29.)  
25 STOP: Stop. (See page 29.)  
26 DVD MENU: Display DVD menu.  
• Press ///to select desired title.  
27 TOP MENU: Display title menu.  
• Press ///to select desired title.  
28 ANGLE: Change the view angle. (See page 31.)  
29 ZOOM: Zoom. (See page 30.)  
30 DIRECT SKIP: Locating desired scene of DVD. (See  
page 30.)  
1
POWER: Switch the power on or enters standby mode.  
(See page 20.)  
31 MARKER: Index (DVD). (See page 31.)  
2
3
0–9: Set the channel. (See page 20.)  
• (DOT) / SUBTITLE: To select 4-digit channel number.  
(See page 20.) / Set subtitle. (See page 31.)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Using the remote control unit  
Use the remote control unit by pointing it towards the remote control sensor on  
the TV/DVD. Objects between the remote control unit and the remote control  
sensor may prevent proper operation.  
Cautions regarding remote control unit  
• Do not expose the remote control unit to shock.  
In addition, do not expose the remote control unit to liquids, and do not place in an area  
with high humidity.  
• Do not install or place the remote control unit under direct sunlight. The heat may cause  
deformation of the remote control unit.  
• The remote control unit may not work properly if the remote control sensor on the TV/DVD  
is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or  
the TV/DVD, or operate the remote control unit closer to the remote control sensor.  
Antennas  
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of  
connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an  
F-type connector, plug it into the antenna terminal at the rear of the TV set.  
1. A 75-ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal  
without tools (Commercially available).  
F-type connector should be  
fingertightened only.  
NOTICE  
When connecting the RF cable to the TV set, do not tighten  
F-type connector  
F-type connector with tools.  
If tools are used, it may cause damage to your TV set. (The  
breaking of internal circuit, etc.)  
75-ohm coaxial cable (round)  
2. A 300-ohm system is a flat “twin-lead” cable that can be  
attached to a 75-ohm terminal through a 300/75-ohm  
adapter (Commercially available).  
F-type connector  
300-ohm twin-lead cable (flat)  
75-ohm coaxial cable  
Connecting Antenna Cable  
Home Antenna  
• Connect the antenna cable to the  
TV using one of the methods in the  
terminal (75-ohm)  
Cable without a  
CATV converter  
Cable TV lead-In  
① ② ③  
or ).  
illustration as shown (  
,
,
Coaxial cable  
(commercially available)  
(Illustration is LC-26DV28UT.)  
VHF/UHF antenna  
Home Antenna  
terminal (75-ohm)  
75-ohm coaxial cable (round)  
Coaxial cable  
(commercially available)  
Combination VHF/  
UHF antenna  
6
or  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
UHF  
3
2
1
300/75-ohm adapter  
VHF  
(commercially available)  
ANTENNA ANTENNA  
Separate VHF/  
UHF antenna  
300-ohm  
twin-lead cable  
300-ohm twin-lead cable  
75-ohm coaxial cable  
Combiner  
(commercially  
available)  
IN OUT  
To TV antenna terminal  
or  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using external equipment  
Experiencing HD images  
An HDTV without an HD source is just an ordinary TV/DVD.  
To enjoy HD images on the TV/DVD, you should get HD programming from the following:  
• Over-the-air broadcasting via HD quality antenna  
• HD cable/satellite subscription  
• HD compatible external equipment  
NOTE  
• For information on updating to HD programming, ask your cable/satellite service provider.  
Types of Connection  
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external  
equipment and use its appropriate terminals for higher quality images.  
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.  
Image  
Terminal on external  
equipment  
Cable  
Terminal on the TV  
Quality  
6
HD  
Quality  
HDMI-certied cable  
Page 16  
6
DVI-HDMI conversion cable  
DVI OUT  
AUDIO  
Page 16  
Ø 3.5 mm stereo minijack cable  
Component video cable  
Audio cable  
Page 17  
S-VIDEO cable  
Audio cable  
Page 17  
AV cable  
Standard  
Quality  
Page 17  
Displaying an External Equipment Image  
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV/DVD.  
NOTE  
• For information on updating to HD programming, ask your cable/satellite service provider.  
1
2
Press INPUT.  
• A list of selectable sources appears.  
Press 0-7 to select the input source.  
• Each time INPUT is pressed, the input source toggles.  
TV  
Input1  
Input2  
DVD  
Input3  
You can also select the input source by pressing /.  
• An image from the selected source automatically displays.  
Input Select  
0. TV  
1. Input1  
2. Input2  
3. Input3  
4. Input4  
5. Input5  
6. Input6  
7. DVD  
[0-7]:Select  
15  
(Illustration is LC-26DV28UT.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to External Equipment  
You can connect many types of external equipment to your TV/DVD. To view external source images, select the  
input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)  
For connecting the TV/DVD to external equipment, use commercially available cables.  
CAUTION  
To protect equipment, always turn off the TV/DVD before connecting any external equipment.  
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.  
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box  
When using HDMI cable (INPUT 4 or 5):  
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and  
video signals using a single cable. The HDMI terminal supports high-resolution video input.  
• Blu-ray disc player  
• DVD player  
Rear of the TV  
• HD cable/satellite set-top box  
6
3
2
1
HDMI-certified cable  
(Illustration is LC-26DV28UT.)  
HDMI OUT  
NOTE  
• Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.  
• Digital audio cannot be output when the HDMI input.  
When using DVI-HDMI conversion cable (INPUT 4):  
• Blu-ray disc player  
• DVD player  
• HD cable/satellite set-top box  
Rear of the TV  
6
3
2
DVI-HDMI conversion cable  
1
(Illustration is LC-26DV28UT.)  
DVI OUT  
AUDIO  
Ø 3.5 mm stereo minijack cable  
NOTE  
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to  
connecting an DVI-HDMI conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/  
HDMI terminal and set “HDMI1 Audio” to “DVI”. (See page 28.)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to External Equipment  
When using Component cable (INPUT 3):  
• Blu-ray disc player  
• DVD player  
• HD cable/satellite set-top box  
Y (Green)  
P
b
(Blue)  
Rear of the TV  
Component video cable  
6
P
r
(Red)  
3
2
1
COMPONENT OUT  
(Illustration is LC-26DV28UT.)  
AUDIO-R (Red)  
AUDIO-L (White)  
Audio cable  
NOTE  
• See page 16 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.  
Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box  
When using S-VIDEO cable (INPUT 1):  
• Game Console  
• Camcoder  
• VCR  
Rear of the TV  
(Illustration is LC-26DV28UT.)  
6
S-VIDEO cable  
3
2
1
AUDIO-R (Red)  
Audio cable  
AUDIO-L (White)  
When using Composite cable (INPUT 1 or 2):  
• Game console  
Rear of the TV  
(Illustration is LC-26DV28UT.)  
• VCR  
6
• Camcorder  
• Cable/Satellite set-top box  
3
2
1
AUDIO-R (Red)  
AV cable  
VIDEO (Yellow)  
AUDIO-L (White)  
NOTE  
• The S-VIDEO terminals take priority over the Video terminals.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to External Equipment  
Connecting an Audio Amplifier  
When using coaxial cable:  
It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.  
Coaxial cable  
Rear of the TV  
6
3
2
1
COAXIAL  
DIGITAL AUDIO INPUT  
(Illustration is LC-26DV28UT.)  
When using audio cable:  
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote  
control. (See page 28.)  
Audio cable  
AUDIO-R (Red)  
Rear of the TV  
AUDIO-L (White)  
6
3
2
1
ANALOG AUDIO IN  
(Illustration is LC-26DV28UT.)  
Connecting a PC  
When using HDMI cable (INPUT 4 or 5):  
Rear of the TV  
6
3
2
1
HDMI-certified cable  
(Illustration is LC-26DV28UT.)  
HDMI OUT  
NOTE  
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable  
to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI1 Audio” to “DVI”.  
(See page 28.)  
• The HDMI terminals only support digital signal.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to External Equipment  
When using DVI-HDMI conversion cable (INPUT 4):  
Rear of the TV  
6
3
2
1
DVI-HDMI conversion cable  
(Illustration is LC-26DV28UT.)  
DVI OUT AUDIO  
Ø 3.5 mm stereo minijack cable  
NOTE  
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to  
connecting an DVI-HDMI conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/  
HDMI terminal and set “HDMI1 Audio” to “DVI”. (See page 28.)  
When using analog RGB cable (INPUT 6):  
Analog RGB cable  
(D-sub 15pin cable  
or VGA cable)  
Rear of the TV  
6
3
2
1
RGB  
AUDIO  
Ø 3.5 mm stereo  
minijack cable  
(Illustration is LC-26DV28UT.)  
NOTE  
• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of INPUT 6.  
Displaying an image from a PC  
To view an image from a PC, perform the following procedure.  
Select the Input 6 (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 15.)  
Adjust the “Picture” items if the PC image does not come in clearly. (See page 28.)  
PC compatibility chart  
Horizontal  
Frequency  
Vertical  
VESA  
PC  
Resolution  
720 x 400  
Frequency  
Standard  
31.5 kHz  
31.5 kHz  
37.9 kHz  
37.5 kHz  
35.1 kHz  
37.9 kHz  
48.1 kHz  
46.9 kHz  
48.4 kHz  
56.5 kHz  
60.0 kHz  
47.8 kHz  
47.7 kHz  
70 Hz  
60 Hz  
72 Hz  
75 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
60 Hz  
60 Hz  
-
VGA  
640 x 480  
800 x 600  
1,024 x 768  
SVGA  
PC  
XGA  
1,280 x 768  
1,360 x 768  
WXGA  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Preparation  
Select the TV mode  
Press TV/DVD to select the TV mode.  
Perform the following steps before you press POWER  
on the remote control unit.  
Turning off the power  
1
2
3
Insert the batteries into the remote control unit.  
(See page 10.)  
Press POWER on the TV/DVD, or POWER on the  
Connect the antenna cable to the TV/DVD. (See  
page 14.)  
Plug in the AC cord to the AC outlet. (See page 9.)  
remote control.  
• The TV/DVD enters standby mode and the image on the  
screen disappears.  
• The POWER indicator on the TV/DVD changes to Red.  
NOTE  
Turning on the power  
• If you are not going to use this TV/DVD for a long period  
of time, be sure to remove the AC cord from the power  
outlet.  
Press POWER on the TV/DVD, or POWER on the  
remote control.  
• Weak electric power is still consumed even when the  
power is turned off.  
TV status indicator (POWER)  
ON  
Lighting (Green)  
Lighting (Red)  
Changing channels  
OFF/Standby  
You can change channels in several ways.  
• POWER indicator (Green): The TV/DVD is on. (“Please  
wait” will appear for a few seconds on the screen.)  
Method 1  
Using CH  
/
on the remote control unit or on the  
TV/DVD.  
Auto Setup  
NOTE  
The Auto Setup menu appears the first time you turn  
on the TV/DVD, and assists you to select the menu  
language, specify the Air/Cable setting, and program  
your channels automatically.  
• If your cable-TV system includes analog and digital  
channels using the same channel number, your channel  
up function will scroll through the analog channel first,  
then the digital channel. Although it may appear as though  
the channel does not change, it actually moves from the  
analog to the digital channel in sequence.  
IMPORTANT: Make sure that the antenna or cable TV  
system connection is made!  
If you use channel-down, it will move in reverse, from the  
digital channel to the analog channel.  
The turn on the TV/DVD, press POWER (POWER  
indicator on the front of the unit changes green. It may  
take approx. 10 seconds for a picture to appear on  
screen.).  
1
Method 2  
Using remote control buttons 0–9, (DOT) to select  
The “Auto Setup” function begins. Press /to select  
2
3
channels for VHF/UHF/CATV/DIGITAL.  
your desired language.  
Press /to select “TV Location”, then press /▶  
to select “Home” or “Store”. This product qualifies for  
ENERGY STAR In Home mode default setting.  
To select a 1 or 2-digit channel number (e. g., Channel 5):  
Press 5  
Home: Qualifies for ENERGY STAR (Backlight: Default setting)  
Store: Not qualify for ENERGY STAR (Backlight: maximum)  
• If you want to change this setting, you can adjust the  
“Backlight” setting. (See page 28.)  
NOTE  
• When selecting a 1-digit channel number, it is not  
necessary to press 0 before the number.  
• When you enter 0–9 only, channel selection will be made  
if there is no operation within a few seconds.  
Press /to select “Signal Type”, then press /to  
4
select “Cable” or “Air”.  
Air:  
VHF/UHF channels  
To select a 3-digit channel number (e. g., Channel 115):  
Press 1J1J5  
Cable: CABLE TV channels  
Press /to select “Automatic Search”, then press or  
5
6
ENTER.  
To select a 4-digit channel number (e. g., Channel 22.1):  
Press 2J2J (DOT) J1  
The TV will begin memorizing all the channels available  
in your area.  
• It may take from 15 minutes to 30 minutes to complete  
memorizing digital cable channels.  
NOTE  
Depending on the reception condition, a bar display may  
not advance for several minutes, please be patient.  
• When you enter 0–9 only, channel selection will be made  
if there is no operation within a few seconds.  
• If you press 0 by itself in “Air” reception, nothing will  
happen.  
NOTE  
• Complete the above steps within a few seconds.  
• When you enter 0–9 and • (DOT), channel selection will  
be made if there is no operation within a few seconds.  
• If you press ENTER in the process of “Auto Setup”, the  
Auto Setup stops and changes to the normal screen.  
• When you make a menu selection, your changes occur  
immediately.You do not have to press EXIT to see your  
changes.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Display the channel information  
Auto Ch Memory  
Press DISPLAY to display the current channel (or  
Auto Ch Memory makes the TV/DVD look for all  
input source) information on the screen.  
channels viewable in the set area.  
When the TV receives a digital signal, the digital  
information will appear for a few seconds.  
1
2
Press TV MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
Press /to select “Auto Ch Memory”, then press or  
ENTER.  
• Channel number  
• Station name  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Sleep timer  
• Program guide  
• Resolution  
• Signal type  
• Audio language  
• Picture size  
3
4
5
Press /to select “Signal Type”, then press /to  
select “Cable” or “Air”.  
Press /to select “Automatic Search”, then press or  
When the TV receives an analog signal, the analog  
information will appear.  
ENTER.  
The TV will begin memorizing all the channels available  
in your area.  
• Channel number • Channel label (if preset)  
• V-Chip rating  
• Sleep timer  
• Picture size  
• Signal type  
• It may take from 15 minutes to 30 minutes to complete  
memorizing digital cable channels.  
Audio information (Stereo, SAP or Mono)  
• Resolution  
Depending on the reception condition, a bar display  
may not advance for several minutes, please be  
patient.  
Setting MTS/SAP stereo mode  
NOTE  
The TV/DVD has a feature that allows reception of  
sound other than the main audio for the program.  
This feature is called Multi-channel Television Sound  
(MTS). The TV/DVD with MTS can receive mono  
sound, stereo sound and Secondary Audio Programs  
(SAP). The SAP feature allows a TV/DVD station to  
broadcast other information, which could be audio in  
another language or something completely different  
like weather information.  
• Memorizing channels is best accomplished during  
evening “PRIMETIME” hours, as more stations are  
broadcasting digital signals. Memorizing channels can  
only be accomplished while a station is broadcasting a  
digital signal to set that channel into memory.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the “Automatic  
Search” procedure regularly.  
Skipping stored channel  
You can set channel selection disabled using CH  
You can enjoy Hi-Fi stereo sound or SAP  
broadcasts where available.  
/
.
1
2
3
Press TV MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
• Stereo broadcasts  
View programs like live sporting events, shows and  
concerts in dynamic stereo sound.  
Press /to select “Add/Delete”, then press or  
• SAP broadcasts  
ENTER.  
Receive TV broadcasts in either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack (either in  
mono or stereo).  
4
Press /to select “Add/Delete”, then press or  
ENTER.  
SAP sound: Listen to a second language, supplementary  
commentary or other information. (SAP is mono sound.)  
5
6
7
Press /to select the channel that you want to skip.  
Press /to select “Delete” for selected channel.  
Press EXIT to return to the normal screen.  
If stereo sound is difficult to hear.  
• Obtain a clearer sound by manually switching to fixed  
mono-sound mode.  
NOTE  
NOTE  
• To add a digital channel you are watching:  
Select a channel you want to add. Then select “Adding  
Channel” in step 4, press or ENTER.  
• To release the skipping channel:  
Select “Add” in step 6.  
• MTS only operates while in TV mode.  
• MTS is available only when receiving analog  
broadcasting, not when receiving digital broadcasting.  
• When the TV receives a stereo or SAP broadcast, the  
word “Stereo” or “SAP” displays on-screen if you press  
DISPLAY.  
Clear All  
All channels are deleted from the channel memory.  
Changing MTS  
You can change MTS as shown below to match the  
television broadcast signal.  
1
2
3
Press TV MENU and the MENU screen displays.  
Press /to select “Channel”, then press or ENTER.  
1
2
3
In analog TV mode, press AUDIO and the “Audio”  
Press /to select “Add/Delete”, then press or  
menu screen displays. “MTS” will be highlighted.  
ENTER.  
Press AUDIO again or /to select “Stereo”,  
4
5
Press /to select “Clear All”, then press or ENTER.  
Press EXIT to return to the normal screen.  
“SAP” or “Mono”.  
Press EXIT to return to the normal screen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Selecting the digital audio language  
View mode for HD programs  
When two or more audio languages are included in a  
Stretch mode is available for HD programs.  
Suitable for viewing wide-screen 1.78:1 aspect-ratio  
programs. When viewing 1.85:1 programs, the stretch  
mode will still show very thin black bands at the top  
and bottom of the screen.  
digital signal, you can select one of the audio languages.  
1
In digital TV mode, press AUDIO and the “Audio  
Language” menu screen displays.  
2
3
Press /or 0-6 to select your desired language.  
Press EXIT to return to the normal screen.  
Labeling channels  
To create channel labels  
NOTE  
• Digital audio is active only when receiving digital  
1
2
Select a channel you want to label.  
boardcasting, not when receiving analog boardcasting.  
Press TV MENU, then press /to select  
“Channel”, then press or ENTER.  
View mode for 4:3 programs  
Press /to select “Ch Label”, then press or  
ENTER. The Ch Label menu will appear.  
1
Press VIEW MODE.  
• The View mode menu displays.  
3
4
Press /to select a channel you want to label,  
• The menu lists the view mode options selectable for  
then press .  
the type of video signal currently being received.  
Ch Label  
2
Press 0–3 or /to select each view mode directly  
while the View mode menu is still on the screen.  
• Each time VIEW MODE is pressed, View Mode item  
toggles.  
Channel Number  
15.1  
Ch Label  
ABC  
Label Clear  
>>  
• You can also select View Mode item by pressing /.  
• You can sequentially select a view mode that has its  
own aspect ratio.  
: Select  
: Adjust ENTER : Set  
Press /repeatedly until the character you want  
appears in the first space.  
Side Bar:  
Suitable for viewing conventional  
4:3 programs in their normal  
format.  
The characters rotation as follows:  
, () @ / + =  
-
-
SPACE  
S.Stretch (Smart stretch):  
Suitable for stretching 4:3  
programs to fill the screen.  
If the character which you desire appears, press  
ENTER. Repeat this step to enter the rest of the  
characters.  
When you finish inputting the label name, press  
ENTER.  
Zoom:  
Suitable for viewing wide-screen  
2.35:1 anamorphic DVDs in full  
screen.  
5
6
Repeat steps 1-5 for other channels. You can  
assign a label to each channel.  
Press EXIT to return to the normal screen.  
Stretch:  
To erase channel labels  
This mode is useful for 1.78:1 DVDs.  
When viewing 1.85:1 DVDs,  
stretch mode will still show very  
thin black bands at the top and  
bottom of the screen.  
1
Select a channel with a label which you want to  
remove.  
2
Press TV MENU, then press /to select  
“Channel”, then press or ENTER.  
Dot by Dot (for PC/HDMI mode  
only):  
Press /to select “Ch Label”, then press or  
ENTER to display the Ch Label menu.  
Detects the resolution of the signal  
of the image and it will be shown  
on the screen with same amount of  
pixels.  
3
Press /to select “Label Clear”. Press or  
ENTER.  
4
5
Repeat steps 1-4 to erase other channel labels.  
Press EXIT to return to the normal screen.  
NOTE  
You can enter to the same menu screen from “Picture” menu.  
You cannot select “Side Bar” and “S.Stretch” when a 720p, 1080i  
or 1080p signal is being input.  
Some High Definition and/or Digital broadcasts may not allow you  
to change the picture size.  
In PC/HDMI Mode, only the “Side Bar”, “Stretch” and “Dot by Dot”  
picture size features are available. In PC Mode (WXGA), only the  
“Stretch” and “Dot by Dot” picture size features are available.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
1
2
3
4
Tune the TV to the desired program.  
Press TV MENU and the MENU screen displays.  
Press /to select “Setup”, then press or ENTER.  
Closed captions and digital closed  
captions  
Press /to select “Closed Caption”, then press  
NOTE  
or ENTER.  
• Closed Caption might not appear according to the  
The Closed Caption menu will appear.  
condition of the signal from the broadcasting station.  
5
6
Press /to setting the “CC Setting” to “On”.  
Your TV/DVD is equipped with an internal Closed  
Caption decoder. It allows you to view conversations,  
narration and sound effects as subtitles on your  
TV/DVD. Closed Captions are available on some TV  
programs and on some VHS home video tapes at the  
discretion of the program provider.  
Press /to select “Analog Caption” or “Digital  
Caption”.  
When you select “Analog Caption”, you can choose  
C1, C2, C3, C4, T1, T2, T3 and T4.  
When you select “Digital Caption”, you can choose  
from CS1, CS2, CS3, CS4, CS5 and CS6.  
Digital Closed Caption service is a new caption  
service available only on digital TV programs (also  
at the discretion of the service provider). It is a more  
flexible system than the original Closed Caption  
system, because it allows a variety of caption sizes  
and font styles. When the Digital Closed Caption  
service is in use, it will be indicated by the appearance  
of a 3-letter abbreviation that also indicates the  
language of the Digital Closed Captions: ENG  
(English), SPA (Spanish), FRA (French) or other  
language codes.  
7
8
Press /to select the desired Closed Caption  
mode for both Analog and Digital Caption.  
Press /to select “CC Priority”, then press / ▶  
to select “Digital CC” or “Analog CC”.  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two kind  
of captions are overlapping.  
9
Press EXIT to return to the normal screen.  
Not all programs and VHS videotapes offer closed  
captions. Please look for the “ ” symbol to ensure  
that captions will be shown.  
NOTE  
• To turn the Closed Caption feature off, setting the “CC  
Setting” to “Off”.  
In the Closed Caption system, there can be more than  
one caption service provided. Each is identified by  
its own number. The “C1” and “C2” services display  
subtitles of TV programs superimposed over the  
program’s picture. Generally, Closed Captions in  
English are transmitted on C1 and Closed Captions in  
other languages are transmitted on C2.  
In the Closed Caption system, the “T1” or “T2”  
services display text that is unrelated to the program  
being viewed (e.g., weather or news). These services  
are also superimposed over the program currently  
being viewed.  
NOTE  
• If the program or video you selected is not closed-captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, setting the “CC  
Setting” to “Off”.  
• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed  
Captioning, especially with live programs. This is because during live programs, captions are also entered live. These  
transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with  
Closed Captions.  
• Some Cable TV systems and copy protection systems may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with  
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.  
• When a Digital TV Program has both Digital Closed Caption and Analog Closed Caption signals, Digital Closed Caption is  
displayed.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Password setting for parental  
control  
Caption setup  
This function allows you to adjust the closed caption  
screen appearance to suit your preference.  
Allows you to use a password to protect certain  
settings from being accidentally changed.  
1
2
Press TV MENU and the MENU screen displays.  
IMPORTANT:  
Press /to select “Setup”, then press or  
Three conditions must be met to enable the V-Chip  
ENTER.  
3
Password is registered.  
V-Chip settings have been made.  
“V-Chip” is set to “On”.  
Press /to select “Closed Caption”, then press  
or ENTER.  
The Closed Caption menu displays.  
4
5
6
7
Press /to select “Digital CC Preset”, then press  
/to select “Custom”.  
Setting a password  
Press /to select “CC Advanced”, then press ▶  
1
2
Press TV MENU and the MENU screen displays.  
or ENTER.  
Press /to select “Lock”, then press or  
Press /to select the desired item, then press  
ENTER.  
/to change the setting.  
3
Select and enter a password (4 digits) using the  
Press EXIT to return to the normal screen.  
0–9, then press ENTER.  
• “ ” appears instead of the number.  
Selectable parameters available in each  
adjustment item.  
4
Enter the same password again to confirm, then  
press ENTER, the password is now registered and  
the Lock menu will appear on the screen.  
Item  
Selectable parameter  
Text Size:  
Text Type:  
Auto, Small, Standard, Large  
Changing the password  
Allows you to change your current password.  
Auto, Style1, Style2, Style3, Style4, Style5,  
Style6, Style7  
1
2
Repeat steps 1 to 3 in Setting a password.  
Text Edge: Auto, None, Raised, Depressed, Uniform,  
Press /to select “Change Password”, then  
Left Shadow, Right Shadow  
press or ENTER.  
3
4
5
Enter a new password using 0–9, then press  
Text Color: Auto, Black, White, Red, Green, Blue,  
ENTER.  
Yellow, Magenta, Cyan  
Enter the same password again to confirm, then  
Text  
Auto, Solid, Transparent, Translucent,  
Flashing  
press ENTER.  
Opacity:  
The screen returns to Lock menu. Your new  
Background Auto, Black, White, Red, Green, Blue,  
Color: Yellow, Magenta, Cyan  
password has been set.  
Background Auto, Solid, Transparent, Translucent,  
NOTE  
Opacity:  
Flashing  
• As a precautionary measure, make a note of your  
password and keep it in a familiar place.  
• The “V-Chip Set (DTV)” will only be selectable when  
a new rating system can be downloaded via digital  
broadcasting in the U.S.  
NOTE  
• This feature is designed to customize Digital Captions  
only.  
• The “Auto” value depends on the broadcasting station.  
• You cannot set both “Text Color” and “Background Color”  
as a same color.  
How to enter the Lock menu  
• You cannot set both “Text Opacity” and “Background  
Opacity” to “Transparent”.  
1
2
Press TV MENU and the MENU screen displays.  
Press /to select “Lock”, then press or  
ENTER.  
3
Input the 4-digit password by using 0–9, then press  
ENTER.  
The Lock menu displays.  
To clear the all V-Chip settings  
1
In the Lock menu, press /to select “V-Chip  
Clear”, then press or ENTER.  
2
Input the 4-digit password by using 0–9, then press  
ENTER. All your settings return to the factory  
settings.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Parental control (V-CHIP)  
V-CHIP might not function according to the condition of the signal from the broadcasting station.  
V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control  
over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing  
while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your  
TV/DVD.  
V-CHIP menu will not be selectable from the menu if you do not first configure your password.  
(See page 24 for password setting for parental control.)  
• The U.S. has two rating systems for viewing content: movie ratings and TV Parental Guidelines.  
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows  
from their children.  
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable  
TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.  
TV Parental Guidelines  
Content  
FANTASY  
VIOLENCE  
SEXUAL  
ADULT  
SEXUAL  
DIALOG  
TV RATING  
VIOLENCE  
SITUATIONS  
LANGUAGE  
TV-Y (All children)  
TV-Y7 (Directed to older children)  
TV-G (General audience)  
TV-PG (Parental Guidance suggested)  
TV-14 (Parents strongly cautioned)  
TV-MA (Mature audience only)  
6
6
6
6
X
X
X
6
6
6
X
X
X
6
6
6
X
X
X
6
6
6
X
X
Suggested  
age  
X
6: The content rating can be set, but this rating is not normally broadcast by TV stations.  
X: Content rating can be set.  
EXAMPLE  
• If you select “TV-G”, this will automatically block the higher ratings “TV-PG”, “TV-14” and “TV-MA”.  
Voluntary movie rating system (MPAA)  
MOVIE RATING  
Description  
G
General audiences. All ages admitted.  
PG  
PG-13  
Parental guidance suggested. Some material may not be suitable for children.  
Parents strongly cautioned. Some material may be inappropriate for children under 13.  
Age  
R
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).  
No one 17 and under admitted.  
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.  
NC-17  
X
EXAMPLE  
• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.  
NOTE  
• Voluntary movie rating system only uses an age-based rating.  
TV Parental Guidelines  
(TV Guidelines)  
Voluntary movie rating system  
(MPAA)  
1
1
In Lock menu, press /to select “V-Chip”, then  
Repeat steps 1 and 2 in TV Parental Guidelines  
press /to select “On” .  
(TV Guidelines).  
2
3
4
5
2
3
4
Press /to select “V-Chip Set”, then press or  
Press /to select “Movie Rating”, then press ▶  
ENTER.  
or ENTER.  
Press /to select “TV Rating”, then press or  
Press /to select the desired rating, then press  
ENTER.  
ENTER.  
Press ///to select the desired rating, then  
Press EXIT to return to the normal screen.  
press ENTER.  
Press EXIT to return to the normal screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Canadian rating systems  
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission  
(CRTC) policy on violence in television programming.  
• While violence is the most important content element to be rated, the structure developed takes into consideration other  
program content like language, nudity, sexuality and mature themes.  
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian  
French ratings.  
Canadian English ratings  
Rating  
Description  
Exempt: Includes news, sports, documentaries and other information programming; talk shows, music  
E
videos, and variety programming.  
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that  
could threaten their sense of security and well-being.  
C
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve  
C8+  
G
conflict; nor encourage children to imitate dangerous acts which they may see on the screen.  
General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very  
little violence, physical, verbal or emotional.  
Age  
Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under  
PG  
the age of 8) because it could contain controversial themes or issues.  
Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but  
it must be integral to the development of plot or character. Language usage could be profane and nudity  
present within the context of the theme.  
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while  
related to the development of plot, character or themes, are intended for adult viewing.  
Could contain graphic language and portrayals of sex and nudity.  
14+  
18+  
Example: If you select “G”, this will automatically block the higher ratings “PG”, “14+” and “18+”.  
Canadian French ratings  
Rating  
Description  
E
Exempt programming.  
General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a  
G
humorous or unrealistic manner.  
General but inadvisable for young children: May be viewed by a wide public audience, but could contain  
8 ans+ scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.  
Age  
Recommended for viewing with parent.  
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing  
13 ans+  
with parent.  
16 ans+ Over 16 years: Could contain frequent violent scenes and intense violence.  
18 ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.  
Example: If you select “8 ans+”, this will automatically block the higher ratings “13 ans+”, “16 ans+” and “18 ans+”.  
How to temporarily release the  
V-Chip block  
Canadian English ratings  
1
Repeat steps 1 and 2 in TV Parental Guidelines  
The V-Chip block is working and censors a broadcast,  
(TV Guidelines).  
“This program has been blocked!” displays.  
2
Select “CAN ENG Rating”, then press or ENTER.  
Press /to select E, C, C8+, G, PG, 14+ or 18+,  
then press ENTER.  
1
2
Press MUTE while the V-Chip is working and then  
the password entering menu displays.  
Enter your 4-digit password with 0–9, then press  
3
Press EXIT to return to the normal screen.  
ENTER.  
At this time V-Chip block temporarily releases.  
Canadian French ratings  
Reactivating the temporarily released V-Chip block  
Method 1: Change to the other channel.  
1
Repeat steps 1 and 2 in TV Parental Guidelines  
Method 2: Switch off the TV power.  
(TV Guidelines).  
NOTE  
2
Select “CAN FRE Rating”, then press or ENTER.  
Press /to select E ,G, 8 ans+, 13 ans+, 16 ans+  
or 18 ans+, then press ENTER.  
• Performing any of the two above will activate the V-Chip  
block.  
3
Press EXIT to return to the normal screen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other convenience functions  
Menu operation buttons  
Quick guide for MENU operation  
Use the following buttons on the remote control to  
example : Select Language  
operate the menu.  
1
Press TV MENU and the MENU screen displays.  
Main Menu  
Picture  
>>  
Audio  
Channel  
Lock  
Setup  
ENTER : Set  
: Select  
2
Press /to select “Setup”, then press or  
ENTER.  
Press /to select “Language”.  
Setup  
Closed Caption  
Language  
Video Label  
On Timer  
>>  
English  
>>  
Off  
Off  
Auto Shut Off  
Auto Setup  
Reset  
>>  
>>  
: Select  
: Adjust  
3
4
Press /to select the desired language.  
...on the following pages the MENU can be called  
in the same way as here.  
Press EXIT to return to the normal screen.  
NOTE  
• Some menu items may not displayed depending on the  
selected input source.  
• If no buttons are pressed for more than approx. 60  
seconds, the menu screen will return to normal Monitor  
screen automatically.  
TV MENU: Press to open the menu screen.  
///: Press to select a desired item on the  
screen or adjust a selected item.  
ENTER: Press to go to the next step or complete  
the setting.  
RETURN: Press to return to the previous step.  
EXIT:  
Press to exit from the menu screen.  
All changed settings will be saved.  
: Adjust  
: Select  
ENTER : Set  
The lower part of the menu screen is an  
operational guide for the remote control.  
It will change in accordance with each menu  
setting screen.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other convenience functions  
Icon  
Picture  
Selected item  
Description  
Picture Setting  
Brightness / Contrast /  
Sharpness / Color / Tint  
Color Temperature  
Backlight  
You can adjust the picture quality to your preference.  
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)  
Backlight adjusts the screen brightness for improved picture clarity.  
Use this feature to change the Black level automatically according  
to the brightness of an image. The Black level will become dark in  
a dark scene.  
DBC  
On / Off  
AV Mode  
Sports  
For a clear-cut image emphasizing high contrast, useful for sports  
viewing.  
Standard  
Movie  
For a highly defined image in a normal lighting.  
For a movie.  
Memory  
Allows the user to customize settings as desired.You can set the  
mode for each input source.  
View Mode  
Film Mode  
See page 22.  
On / Off  
A smoother motion may be obtained by setting the Film Mode to  
“On” when you view a DVD from the DVD player.  
To adjust the horizontal / vertical position of the image on the PC  
Monitor screen. Each video standard will require a different value  
for this setting.  
PC Setting*  
Hor Position / Ver Position  
(see pages 18, 19)  
Clock  
Phase  
To minimize any vertical bars or stripes visible on the screen background.  
This must be adjusted after the frequency has been set optimize  
picture quality.  
Auto Adjust  
On / Off  
To adjust the all PC settings automatically.  
DNR  
DNR (Digital Noise Reduction) can reduce the roughness of the  
picture.  
Bass / Treble / Balance  
MTS  
Surround  
You can adjust the sound quality to your preference.  
See page 21.  
Audio  
Stereo / SAP / Mono  
On / Off  
The dynamic presence and sound created offers a thoroughly  
enjoyable listening experience.  
Audio Language  
HDMI1 Audio  
When two or more audio languages are included in a digital  
signal, you can select one of the audio languages.  
When you connect the HDMI device to the TV, select this setting.  
When you connect the DVI device to the TV with analog audio  
cords, select this setting.  
HDMI  
DVI  
Speakers  
On  
Off  
• Sound via speaker and AUDIO OUTPUT terminal are adjusted  
with VOL +/– on the remote control unit or VOL +/– on the TV.  
• Sound via the AUDIO OUTPUT terminal is adjusted with VOL  
+/– on the remote control unit or VOL +/– on the TV.  
• Sound via speaker is muted.  
Add/Delete  
DTV Signal  
Adding Channel / Add/Delete See page 21.  
/ Clear All  
Channel  
Select “DTV Signal”, then press or ENTER. The Digital-Signal  
strength screen will appear.  
If necessary, adjust the direction of the antenna to obtain the  
maximum signal strength.  
Auto Ch Memory  
Ch Label  
Signal Type / Automatic  
Search  
See page 21.  
Channel Number / Ch Label / See page 22.  
Label Clear  
See pages 24~26.  
Lock  
Closed Caption  
Language  
See page 23.  
Setup  
English / Français / Español You can choose from three different languages (English, French  
and Spanish) for the on-screen displays.  
Video Label  
Let you set the input terminal displayed when using the “Input Select”  
menu or channel display.  
Press /to select the specific input source which you want to change.  
Press /to select the new label for the selected input source.  
On Timer  
Off / 0h30m / 1h00m / 1h30m You can set On Timer to automatically turn on the TV. To cancel  
/ 2h00m / 3h00m⋅⋅⋅12h00m the On Timer, set to “Off”.  
Auto Shut Off  
On / Off  
In case of “Auto Shut Off” feature is “On”, if a station being viewed  
stops broadcasting, the TV will automatically shut itself off after 15  
minutes.  
• If Auto Shut Off is “On” and the broadcast signal is weak, the TV  
may automatically shut itself off. If this happens, turn Auto Shut  
Off to “Off”.  
Auto Setup  
Reset  
See page 20.  
The Reset function returns your settings to the factory settings.  
NOTE  
* “PC Setting” is available only for PC INPUT (INPUT 6).  
* When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only.  
* Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or  
28  
has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching the DVD  
Preparation  
2
3
On the screen, “ ” changes to “Loading” and then  
playback will commence.  
Perform the following steps before you press POWER  
• A menu screen appear on the TV screen, if the disc  
has a menu feature. In this case, press ///or  
ENTER to operate a menu feature.  
on the remote control unit.  
1
Insert the batteries into the remote control unit.  
Press STOP to end playback.  
(See page 10.)  
• The unit can record where you stop a video, but it  
depends on a disc you are using. Press PLAY to  
resume a playback point. The unit can store a memory  
of stopped point of last five discs that you have played.  
When one of these discs is next loaded, you can  
resume playback from where you stopped playing last  
time.  
2
Plug in the AC cord to the AC outlet. (See page 9.)  
Turning on the power  
Press POWER on the TV/DVD, or POWER on the  
remote control.  
• If you press STOP again (“Resume off” appears on the  
screen), the TV/DVD will clear the stopped point.  
• It is only DVD videos that a stopped point can be  
stored in the unit with.  
• POWER indicator (Green): The TV/DVD is on. (“Please  
wait” will appear for a few seconds on the screen.)  
Select the DVD mode  
• You cannot save a stopped point for some discs. If a  
number of discs played and stored in the unit exceeds  
five, a new memory will overwrite the old stored  
memory.  
Press TV/DVD to select the DVD mode.  
Turning off the power  
4
Press EJECT.  
Remove the disc and then press POWER.  
The TV/DVD turns off.  
Press POWER on the TV/DVD, or POWER on the  
remote control.  
• When you eject the disc, you may hear mechanism  
noise, but it is not malfunction.  
• The TV/DVD enters standby mode and the image on the  
screen disappears.  
• The POWER indicator on the TV/DVD changes to Red.  
NOTE  
Status display of DVD disc  
• If you are not going to use this TV/DVD for a long period  
of time, be sure to remove the AC cord from the power  
outlet.  
Press DISPLAY. The status display of the disc will  
appear on the screen.  
• Display messages may change at every time when you  
press DISPLAY for some discs or files.  
• Weak electric power is still consumed even when the  
power is turned off.  
NOTE  
Playback procedure  
• If the TV/DVD does not operate properly:  
Static electricity, etc., may affect the player’s operation.  
Disconnect the AC power cord once, then connect it  
again.  
1
Place the disc in the disc slot with the label side  
facing forward. (If the disc has a label.) Hold the  
disc without touching its surface, align it with the  
guides, and place it in position.  
• About inserting disc:  
If the unit is slanted or moved while inserting disc, the disc  
may get damage.  
• If a disc is inserted during some modes other than  
DVD mode, it may switch to DVD mode and then  
playback may be begun automatically.  
NOTE  
• If a non-compatible disc is loaded, “Can’t play disc” or “Incompatible disc region number Can’t play disc” will appear on the  
TV screen according to the type of loaded disc. In this case, check your disc again (see pages 6 and 36).  
• Some discs may take a minute or so to start playback.  
• When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.  
• A prohibition message “Depending on the disc, this operation may be prohibited” or “This operation can’t be performed”  
may appear at the screen. This message means either the feature you tried is not available on the disc, or the unit cannot  
access the feature at this time. This does not indicate a problem with the unit.  
• When you set a single-faced disc label downwards (i.e. the wrong way up) “Loading” will appear on the display and then  
“Can’t play disc” will be displayed.  
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs  
according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied  
with the DVDs.  
• Do not move the unit during playback. Doing so may damage the disc.  
• Use EJECT to unload and eject the disc.  
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunction.  
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen  
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press  
POWER on your remote control once the movie is completed.  
• There may be a slight delay between the button is pressed and the function activates.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching the DVD  
Special playback  
Locating desired scene  
Fast Forward Playback  
Use the title, chapter and time recorded on the disc to  
locate the desired point to playback.  
Press FWD during normal playback.  
Each press of FWD will increase the speed of the search.  
• To resume normal playback, press PLAY.  
Press DIRECT SKIP during playback.  
1
2
Press /to select the “Title Search”, “Chapter  
Search”, “Time Search” or “Track Search” (Audio  
CD). Then press ENTER.  
Review Playback  
Press REV during normal playback.  
Each press of REV will increase the speed of the search.  
• To resume normal playback, press PLAY.  
Press Number buttons (0–9) to input the number.  
• If you input a wrong number, press CANCEL.  
• Refer to the package supplied with the disc to check  
the numbers.  
3
4
Still Playback  
Press STILL/PAUSE during normal playback to pause  
playback.  
• To resume normal playback, press PLAY or STILL/  
Press ENTER.  
• Playback starts.  
PAUSE.  
• When you change the title, playback starts from  
Chapter 1 of the selected title.  
Frame Advance  
Press STILL/PAUSE during normal playback.  
One frame is advanced each time you press WW or XX .  
• To resume normal playback, press PLAY.  
• Some discs may not work in the above operation.  
Slow-motion Playback  
A-B Repeat playback  
Press SLOW ( ) or SLOW ( ) during normal playback or  
still playback.  
A-B repeat playback allows you to repeat material  
Each press of SLOW will change the speed of the slow.  
• To resume normal playback, press PLAY.  
• To resume the still playback, press STILL/PAUSE.  
between two selected points.  
1
2
Press A-B REPEAT during playback.  
Locating a chapter or track  
The start point is selected.  
Press SKIP(  
) Forward or SKIP(  
) Reverse during  
Press A-B REPEAT again.  
playback to locate a chapter/track that you want to watch.  
Each time you press the button, a chapter or track is  
skipped.  
The end point is selected.  
Playback starts at the point that you selected.  
Playback stops at the end point, returns to Point A  
automatically, then starts again.  
• To resume normal playback press A-B REPEAT  
again.  
NOTE  
• The TV/DVD is capable of holding a still video image or On  
screen display image on your television screen indefinitely.  
If you leave the still video image or On screen display image  
displayed on your TV for an extended period of time, you  
risk permanent damage to your television screen.  
NOTE  
• In A-B Repeat mode, subtitles near the A or B locations  
may not be displayed.  
• You may not be able to set A-B Repeat during certain  
scenes of the DVD.  
Zooming  
• A-B Repeat does not work with an interactive DVD, MP3/  
WMA/JPEG-CD.  
This TV/DVD will allow you to zoom in on the frame  
image. You can then make selections by switching the  
position of the frame.  
1
2
3
Press ZOOM during playback.  
The center part of the image will be zoomed in.  
Each press of ZOOM will change the ZOOM  
magnification Zoom 2× and Zoom 4×.  
Press ///to view a different part of the  
frame.  
You may move the frame from the center position  
UP, DOWN, LEFT or RIGHT.  
In the zoom mode press ZOOM repeatedly to  
return to a 1:1 view.  
NOTE  
• You can select the Still Playback or Fast Forward (Review)  
Playback in the zoom mode.  
• Some discs may not respond to zoom feature.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching the DVD  
Marking desired scenes  
Changing soundtrack language  
The TV/DVD stores the points that you want to watch  
You can select the language when you play a  
again up to 12 points.  
multilingual disc.  
You can resume playback from each scene.  
1
Press AUDIO during playback.  
The current soundtrack language will appear.  
Marking the scenes  
Current/Total  
Audio  
1/2  
English  
Dolby Digital 2/0CH  
1
2
Press MARKER during playback.  
Select the blank Marker using ///, then  
press ENTER at the desired scene.  
2
Press AUDIO repeatedly until the desired  
language is selected.  
• Up to 12 scenes can be selected.  
• Repeat this procedure to set the other 11 scenes.  
The on-screen display will disappear after a few  
3
Press MARKER to return to the normal screen.  
seconds.  
Current/Total  
Returning to the scenes  
Audio  
2/2  
French  
Dolby Digital 2/0CH  
1
2
3
Press MARKER during playback or stop mode.  
Press ///to select the Marker 1-12.  
Press ENTER.  
NOTE  
Playback starts from the marked scene.  
• If the desired language is not heard after pressing AUDIO  
several times, the language is not recorded on the disc.  
• Changing soundtrack language is cancelled after  
“Resume off”.  
To cancel the Marker  
Follow the above steps 1~2, then press CANCEL.  
The initial default language or available language will be  
heard if the disc is played back again.  
NOTE  
• Some discs may not work with the marking operation.  
• The marking is cancelled when you eject the disc or turn  
the power off.  
Subtitles  
• Some subtitles recorded around the marker may fail to  
appear.  
Changing the subtitle language  
You can select the language when playing back a disc  
recorded with multilingual subtitles.  
1
Press SUBTITLE repeatedly during playback until  
your desired language appears.  
The on-screen display will disappear after a few  
seconds.  
Changing angles  
When playing back a disc recorded with multi-angle  
facility, you can change the view angle.  
Current/Total  
1
Press ANGLE during playback.  
The current angle will appear.  
Current/Total  
Subtitle 1/2  
English  
Angle  
1/2  
Turning the subtitles off  
Press SUBTITLE during playback until “Off” appears.  
2
Press ANGLE repeatedly until the desired angle is  
selected.  
NOTE  
• Changing subtitle language is cancelled after “Resume  
off”.  
NOTE  
• Some functions may not work on some DVDs. You may  
not be able to turn subtitles on or off or change subtitles.  
While playing the DVD, the subtitle may change when:  
- you eject or insert the disc.  
• In case of JPEG-playback, the  
90 degrees to the right.  
• Depending on the DVD, you may not be able to change  
the angles even if multi-angles are recorded on the DVD.  
JPEG-image is rotated  
- you change the title.  
• In some cases, the subtitle language is not changed to the  
selected one immediately.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching the DVD  
Using HOME MENU  
Playing a disc  
Play mode  
A-B repeat playback  
A-B repeat playback allows you to repeat selection  
between two selected points.  
1
Press SETUP during stop mode.  
HOME MENU will appear.  
1
Press PLAY MODE  
during playback.  
Play Mode screen will  
appear.  
Play Mode  
2
Press ///▶  
HOME MENU  
DVD  
A-B Repeat  
A(Start Point)  
B(End Point)  
Off  
to select “Disc  
Audio Settings  
Video Adjust  
Repeat  
Random  
Navigator”, then press  
Program  
Search Mode  
Play Mode  
Disc Navigator  
ENTER.  
Initial Settings  
2
3
4
Press /to select “A-B Repeat”, then press or  
ENTER  
Disc Navigator  
Title  
Chapter  
3
4
Press /to select  
desired option, then  
press ENTER.  
.
Press /to select “A(Start Point)”, then press  
ENTER. The start point is selected.  
• Some discs may not work Disc Navigator.  
• Depending on a disc, you can select Title, Chapter, or  
both.  
Press /to select “B(End Point)”, then press  
ENTER.  
Press ///or Number Buttons (0–9) to  
The end point is selected. Playback starts at the  
point that you selected. Playback stops at the end  
point and returns to Point A automatically, then  
starts again.  
select Title or Chapter, then press ENTER.  
• Press  
or  
to move next/previous page.  
• Press RETURN to return to previous step.  
To resume normal playback  
Playing a file  
Select “Off” in step 3.  
1
2
3
Press SETUP during stop mode.  
HOME MENU will appear.  
NOTE  
Press ///to select “Disc Navigator”, then  
• Some discs may not work Play mode function.  
• A-B Repeat playback does not work with MP3/WMA CD.  
press ENTER.  
Press /to select  
Repeat playback  
00:00/ 00:00  
0kbps  
folder, then press  
1
2
3
Press PLAY MODE during playback.  
ENTER.  
Folder1  
Folder2  
Folder3  
Folder4  
Play Mode screen will appear.  
Press /to select “Repeat”, then press or  
ENTER  
.
Press /to select desired repeat option, then  
4
Press /to select file, then press ENTER.  
• If you select JPEG file, unit shows the pictures one  
after another automatically.  
press ENTER.  
The unit automatically starts repeat playback after  
finishing the current title or chapter.  
• Press SETUP to clear HOME MENU screen.  
• Press RETURN to go to previous step.  
To resume normal playback  
Select “Repeat Off” in step 3.  
NOTE  
• When music files and JPEG files are recorded in one  
disc, you can play simultaneously. Please select the  
music file then select the JPEG file.  
Random playback  
1
2
3
Press PLAY MODE during playback.  
Play Mode screen will appear.  
Press /to select “Random”, then press or  
ENTER.  
Press /to select desired random playback  
option, then press ENTER.  
The unit automatically starts random playback.  
To resume normal playback  
Select “Random Off” in step 3.  
NOTE  
• You cannot play Random for programmed contents  
(Random play is not permitted during Program playback).  
• During Random playback, it may repeat the same title,  
chapter or track.  
• Random playback does not work with MP3/WMA CD.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching the DVD  
Program playback  
Audio Settings menu  
1
2
3
Press PLAY MODE during playback.  
The Audio Settings menu offers features for adjusting  
Play Mode screen will appear.  
the way discs sound.  
Press /to select “Program”, then press or  
1
2
Press SETUP during stop mode.  
ENTER.  
HOME MENU will appear.  
Program  
Current  
Title:02 Chapter:001  
Chapter 1-004  
Press /to select  
“Create/Edit”, then  
press ENTER. “Create/  
Edit” display differs,  
depending on discs or  
files.  
Program Step  
Title 1-38  
01. 01  
02.  
Title 01  
Title 02  
Title 03  
Title 04  
Title 05  
Title 06  
Title 07  
Title 08  
Chapter 001  
Chapter 002  
Chapter 003  
Chapter 004  
Press ///to  
HOME MENU  
DVD  
03.  
select “Audio Settings”,  
04.  
Audio Settings  
Video Adjust  
05.  
then press ENTER.  
06.  
07.  
Play Mode  
Disc Navigator  
08.  
Initial Settings  
4
5
Press ///to select Title, Chapter, Track or  
Audio Settings  
3
4
Press ///to  
setting the option, then  
press ENTER.  
Equalizer  
Audio DRC  
Dialog  
Off  
File, then press ENTER.  
Rock  
Pop  
• When you add a program, find where you want to add  
it (Program Step) and select Title, Chapter or Track  
then press ENTER. (It will be added to the left if File is  
added.)  
Live  
Dance  
Techno  
Classic  
Soft  
To go to previous step, press RETURN.  
• If RETURN is pressed while programming, the content  
will be deleted.  
Press SETUP to save the setting.  
Equalizer  
Select the most suitable setting to match a category of  
music that you are listening to.  
To delete a program, select Program Step that you  
want to delete and press CANCEL.  
Press PLAY.  
Audio DRC  
To play existing programmed contents, select  
“Playback Start” from Play Mode screen and press  
ENTER.  
• Loud sound level goes down and quiet sound level  
goes up while playing. This is useful, for instance,  
when you watch a film in the late night.  
• It only works with Dolby Digital Sound.  
• The effect depends on your AV amplifier and speakers  
volume. Adjust the sound as you wish and find the  
most effective setting.  
To resume normal playback, select “Playback  
Stop” in Play Mode screen and press ENTER.Your  
programmed contents are saved.  
To delete all programmed contents, select “Program  
Delete” in Play Mode screen and press ENTER.  
Dialog  
NOTE  
Adjust setting when you cannot hear dialogs very well.  
You can repeat the programmed contents. Select  
“Program Repeat” from “Repeat” in the Play Mode  
screen during Program playback.  
NOTE  
• It may not be very effective for some discs or files.  
You cannot play Random for programmed contents  
(Random play is not permitted during Program  
playback).  
• In stop mode, you can also enter Play Mode screen by  
selecting “Play Mode” in HOME MENU.  
Locating desired scene  
1
2
3
Press PLAY MODE during playback.  
Play Mode screen will appear.  
Press /to select “Search Mode”, then press ▶  
or ENTER.  
Press /to select desired search mode option,  
then press or ENTER.  
• Search Mode options differs, depending on discs or  
files.  
4
Input Title, Chapter,  
Play Mode  
Track or Folder number  
A-B Repeat  
Repeat  
Title Search  
Input Chapter  
Chapter Search  
Time Search  
or Time by using  
Random  
0
0
1
Program  
Number buttons (0–9)  
and press ENTER.  
Search Mode  
• For instance, if you want to enter 1hr 4min (64:00),  
input 6, 4, 0, 0.  
NOTE  
You can locate desired scene in Menu screen for some  
DVD video.  
• In stop mode, you can also enter Play Mode screen by  
selecting “Play Mode” in HOME MENU.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Watching the DVD  
Video Adjust menu  
Customizing The Function Settings  
From the Video Adjust menu you can adjust various  
You can change the default settings to customize  
settings that affect how the picture is presented.  
performance to your preference.  
1
2
Press SETUP during stop mode.  
Setting procedure  
HOME MENU will appear.  
1
Press SETUP in stop mode.  
Press ///to select  
HOME MENU  
DVD  
HOME MENU will appear.  
“Video Adjust”, then  
Audio Settings  
Video Adjust  
2
Press ///to  
HOME MENU  
DVD  
press ENTER.  
Play Mode  
Disc Navigator  
select “Initial Settings”,  
then press ENTER.  
Audio Settings  
Video Adjust  
Initial Settings  
Play Mode  
Disc Navigator  
3
Press ///to  
setting the option, then  
press ENTER.  
Video Adjust  
Sharpness  
Brightness  
Contrast  
Gamma  
Initial Settings  
Fine  
Standard  
Soft  
3
4
Press ///to select the desired option, then  
Hue  
Chroma Level  
press ENTER.  
Change the selection using ///or ENTER,  
by referring to the corresponding page 35.  
Repeat steps 3 and 4 to change other option.  
4
Press SETUP to save the setting.  
5
To clear HOME MENU screen, press SETUP.  
Sharpness  
Adjust sharpness of images.  
Brightness  
Adjust brightness of images.  
Contrast  
Adjust a ratio of brightness between the brightest part and  
the darkest part.  
Gamma  
Emphasize dark part of images.  
Hue  
Adjust a balance between green and red.  
Chroma Level  
Adjust color density. It is effective with animation or  
something with high color density.  
NOTE  
• It may not be very effective for some discs or files.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Setup  
Customizing The Function Settings  
Setting  
Option  
Description  
Digital Audio Out settings  
Digital Out  
On  
Off  
Digital audio is output from the digital outputs.  
No digital audio output.  
Dolby Digital Out  
Dolby Digital  
Dolby Digital encoded digital audio is output when playing a Dolby Digital  
DVD disc.  
Dolby Digital > PCM  
DTS  
Dolby Digital audio is converted to PCM audio before being output.  
DTS encoded digital audio is output when playing a DTS disc. (Noise will be  
output if your amplifier/receiver is not compatible with DTS audio.)  
DTS Out  
Off  
No digital audio is output.  
96kHz PCM Out  
MPEG Out  
96kHz > 48kHz  
96kHz  
MPEG  
96 kHz digital audio is converted to 48 kHz for digital output.  
96 kHz digital audio is output as is at 96 kHz.  
MPEG encoded digital audio is output as is.  
MPEG > PCM  
MPEG encoded digital audio is converted to PCM audio for digital output.  
Video Output settings  
TV Screen 4:3 (Letter Box)  
Set if you have a conventional 4:3 TV. Widescreen movies are shown with  
black bars top and bottom.  
4:3 (Pan & Scan)  
Set if you have a conventional 4:3 TV. Widescreen movies are shown with  
the sides cropped so that the image fills the screen.  
16:9 (Wide)  
Set if you have a widescreen TV.  
Language settings  
Audio Language  
English/French/Spanish If there is an English, French or Spanish soundtrack on the disc, then it will  
be played.  
Other Language  
Select to choose a language other than the ones displayed. (See Language  
Code List on page 37.)  
Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc, then it will be  
displayed.  
Other Language  
Select to choose a language other than the ones displayed. (see Language  
Code List on page 37.)  
DVD Menu Lang.  
w/Subtitle Lang.  
DVD disc menus will be displayed in the same language as your selected  
subtitle language, if possible.  
English/French/Spanish If there is an English, French or Spanish DVD menu language on the disc,  
then it will be displayed.  
Other Language  
Select to choose a language other than the ones displayed. (see Language  
Code List on page 37.)  
Subtitle Display  
On  
Off  
Subtitles are displayed according to your selected subtitle language (see  
above).  
Subtitles are always off by default when you play a DVD disc (note that some  
discs override this setting).  
Display settings  
Angle Indicator  
On  
Off  
A camera icon is displayed on-screen during multi-angle scenes on a DVD  
disc.  
No multi-angle indication is shown.  
Options settings  
Parental Lock  
See page 36.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Level Change  
Parental Control  
Some discs are specified as not suitable for children.  
Such discs can be limited not to playback with the  
unit.  
Initial Settings  
1
2
3
Press  
or  
to select  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
“Level Change”, then  
press ENTER.  
Display  
Options  
How to into the Parental menu  
Initial Settings  
Press Number buttons  
(0–9) to input the  
1
Press SETUP in stop mode.  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Level Change  
Password  
HOME MENU will appear.  
current password, then  
press ENTER.  
Display  
2
Press ///to select  
“Initial Settings”, then  
press ENTER.  
HOME MENU  
DVD  
Options  
1
2
3
4
5
6
7
8
Off  
Audio Settings  
Video Adjust  
Play Mode  
Disc Navigator  
Initial Settings  
Press  
or  
to select  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Level Change  
Password  
from the level 1 to level  
8. The limitation will be  
more severe as the level  
number is lower. Then  
press ENTER.  
Initial Settings  
Display  
Options  
3
Press /to select “Options”, then press or  
1
2
3
4
5
6
7
8
Off  
ENTER  
.
Then press or ENTER to enter the Parental Lock  
menu.  
Level 1: DVD software for adults cannot be played  
back.  
Set Password  
Level 8: Virtually all DVD software can be played  
back.  
Initial Settings  
1
Press  
or  
to select  
Level Off: The parental control setting does not  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password  
Level Change  
Country Code  
“Password”, then press  
function.  
ENTER.  
Display  
Options  
Country Code  
Initial Settings  
1
2
3
Press  
or  
to select  
Initial Settings  
2
Press Number buttons  
(0–9) to input the  
password, then press  
ENTER.  
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
“Country Code”, then  
Digital Audio Out  
Video Output  
Language  
Display  
Options  
Parental Lock: Register Code Number  
press ENTER.  
Display  
Options  
Initial Settings  
Press Number buttons  
(0–9) to input the  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Change Country Code  
Password  
Change Password  
current password, then  
press ENTER.  
Country Code List  
us  
Code  
Display  
Options  
Initial Settings  
1
2
3
Press  
or  
to select  
2
1
1
9
Digital Audio Out  
Video Output  
Language  
Parental Lock  
Password Change  
Level Change  
Country Code  
“Password Change”,  
then press ENTER.  
Display  
Initial Settings  
Press  
or  
to select  
Options  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Change Country Code  
Password  
the input mode from  
“Country Code List” or  
“Code”.  
Country Code List  
us  
Code  
Display  
Options  
Initial Settings  
Press Number buttons  
(0–9) to input the  
2
1
1
9
Digital Audio Out  
Video Output  
Language  
Parental Lock: Password Change  
Password  
current password, then  
press ENTER.  
• When you selected “Country Code List”: Press or ▼  
to select Country Code, then press ENTER.  
• When you selected “Code”: Press then use the  
Number buttons (0-9) to enter the 4-digit Country  
Code then press ENTER. (see Country/Area Code List  
on page 37)  
New Password  
Display  
Options  
Initial Settings  
Press Number buttons  
(0–9) to input the  
Digital Audio Out  
Video Output  
Language  
Parental Lock: Password Change  
Password  
new password. Press  
ENTER. Now your new  
password has been set.  
Be sure to remember  
this number!  
New Password  
Display  
Options  
NOTE  
• Depending on the discs, the unit cannot limit playback.  
• Some discs may not be encoded with specific rating  
level information though its disc jacket says “adult.” For  
those discs, the age restriction will not work.  
• If you input a wrong number, press , then input  
correct number.  
NOTE  
If you forget the password...  
1. Press EJECT to remove the disc.  
2. While holding STOP down on the front panel, press 7 on  
the remote control for more then 2 seconds.  
3. Enter a new password again.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Language Code List  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Kirghiz (ky), 1125  
Sinhalese (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swahili (sw), 1923  
Tamil (ta), 2001  
Latin (la), 1201  
Lingala (ln), 1214  
German (de), 0405  
Italian (it), 0920  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Spanish (es), 0519  
Chinese (zh), 2608  
Dutch (nl), 1412  
Fiji (fj), 0610  
Malagasy (mg), 1307  
Maori (mi), 1309  
Faroese (fo), 0615  
Frisian (fy), 0625  
Portuguese (pt), 1620  
Swedish (sv), 1922  
Russian (ru), 1821  
Korean (ko), 1115  
Greek (el), 0512  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Afar (aa), 0101  
Telugu (te), 2005  
Tajik (tg), 2007  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Thai (th), 2008  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Nepali (ne), 1405  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Panjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813  
Kirundi (rn), 1814  
Twi (tw), 2023  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Welsh (cy), 0325  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Danish (da), 0401  
Country/Area Code List  
Country/Area, Country/Area code, Country/Area code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Finland, 0609, fi  
France, 0618, fr  
Malaysia, 1325, my  
Mexico, 1324, mx  
Singapore, 1907, sg  
Spain, 0519, es  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Sweden, 1905, se  
Switzerland, 0308, ch  
Taiwan, 2023, tw  
Canada, 0301, ca  
Chile, 0312, cl  
Indonesia, 0904, id  
Italy, 0920, it  
Pakistan, 1611, pk  
Philippines, 1608, ph  
Portugal, 1620, pt  
Thailand, 2008, th  
United Kingdom, 0702, gb  
USA, 2119, us  
China, 0314, cn  
Denmark, 0411, dk  
Japan, 1016, jp  
Republic of Korea, 1118, kr  
Russian Federation, 1821, ru  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Problem  
Possible Solution  
• No power  
• Check if you pressed POWER on the TV/DVD, or on the remote control unit.  
(See page 20.)  
• Is the AC cord disconnected? (See page 9.)  
• Has the power been turned on? (See page 20.)  
• Unit cannot be operated.  
• External influences such as lightning, static electricity, may cause improper  
operation. In this case, operate the unit after first turning off the power of the TV/  
DVD or unplugging the AC cord and replugging it in after 1 or 2 minutes.  
• Remote control unit does not  
operate.  
• Are batteries inserted with polarity (+, –) aligned? (See page 10.)  
• Are batteries worn out? (Replace with new batteries.)  
• Are you using it under strong or fluorescent lighting?  
• Is a fluorescent light illuminated near the remote control sensor?  
• Picture is cut off/with sidebar  
screen.  
• Are screen mode adjustments such as view mode choose made correctly? (See  
page 22.)  
• Strange color, light color, or color • Adjust the picture tone. (See page 28.)  
misalignment  
• Is the room too bright? The picture may look dark in a room that is too bright.  
• Power is suddenly turned off.  
• Is the sleep timer set? (See page 13.)  
• Check the Auto Shut Off settings. (See page 28.)  
• The unit’s internal temperature has increased.  
Remove any objects blocking vent or clean.  
• No picture  
• No sound  
• Is connection to other components correct? (See page 15.)  
• Is correct input signal source selected after connection? (See page 15.)  
• Is the correct input selected? (See page 15.)  
• Is picture adjustment correct? (See page 28.)  
• Is the volume too low? (See page 13.)  
• Have you pressed MUTE on the remote control unit? (See page 13.)  
• Is connection to other components correct? (See pages 15-19.)  
• Is “Off ” selected in “Speakers”? (See page 28.)  
• Check the audio output of the connected external equipment. Is the volume too low  
or mufed?  
• When external equiprnent is connected via an HDMI cable, you may need to  
configure the audio to be output through the HDMI cable.  
• The TV sometimes makes a  
cracking sound.  
• This is not a malfunction. This happens when the cabinet slightly expands and  
contracts according to change in temperature. This does not affect the TV’s  
performance.  
Troubleshooting-Error Message  
The example of an error  
Possible Solution  
message displayed on a screen  
• Digital channel signal strength is • Check the antenna cable. Check that the antenna is correctly setup.  
low  
• Digital channel is scrambled  
• Audio only  
• It is subscription channel. Contact the service provider.  
• The channel has audio contents only.  
Troubleshooting-PC mode  
Problem  
Possible Solution  
• There is no image.  
• Make sure the RGB cable is properly connected. (See page 19.)  
• Make sure the output signal of the PC and the input signal setting of the LCD TV set  
are matched. (See page 19.)  
• Some software prohibit video playback on an external display when playing back a  
video with a notebook PC. This is not attributable to a problem with the LCD TV set.  
• There is no sound.  
• The text is blurred.  
• Make sure the PC audio cable is properly connected. (See page 19.)  
• Check if the mute function activates, or if the volume is set to minimum. (See page  
13.)  
• Adjust “Clock” and “Phase” using the PC Setting menu. (See page 28.)  
• The image is not displayed in the • Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See page 28.)  
center of the screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting-DVD  
Problem  
Possible Solution  
• Playback doesn’t start.  
• No disc is inserted. (See page 29.)  
• The disc may be dirty. Clean up the disc. (See page 7.)  
• The TV/DVD cannot play CD-ROMs, etc. (See page 6.)  
• No picture.  
• No sound.  
• TV/DVD selector is not set correctly. (See page 29.)  
• Check the input selector of the amplifier is set properly.  
• The TV/DVD is in the special playback mode. (See page 30.)  
• Select the correct Audio Output position on AV amplifier.  
• Picture is distorted during fast  
reverse/forward playback.  
• The picture will be distorted occasionally.  
• Stopping playback, search,  
slowmotion play, repeat play, or  
program play, etc. cannot be  
performed.  
• Some discs may not do some of the functions.  
• No surround sound.  
• The setup does not match your stereo system.  
• The TV/DVD or remote operation  
key is not functioning.  
• Turn off the TV/DVD and unplug the AC power cord for several minutes, then  
replug it.  
• Playback does not start when the  
title is selected.  
• Check the Parental setup. (See page 36.)  
• Audio soundtrack and/or subtitle  
language is not changed when  
you playback a DVD.  
• Multilingual language is not recorded on the DVD disc. (See page 31.)  
• No subtitle.  
• Some discs have no subtitles. (See page 31.)  
• Subtitles are cleared. Press SUBTITLE. (See page 31.)  
• Angle cannot be changed.  
• Multi-angles are not recorded on the DVD disc. (See page 31.)  
• “This operation can’t be performed” • The function is prohibited with the TV/DVD or the disc. (See page 29.)  
appears on the screen.  
Cautions regarding use in high and low temperature environments  
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly  
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.  
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a  
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.  
Storage temperature: –4°F to +140°F (–20°C to +60°C)  
CLEARING THE PASSWORD  
If you forget the password, clear the password using the following procedure.  
1
Press and hold both VOL – on the TV/DVD and  
press 0 on the remote control simultaneously for  
MENU screen  
a few seconds until  
appears on the  
screen.  
2
Now the old password was cleared. You can set  
the new password.  
(Illustration is LC-26DV28UT.)  
The password is  
.
NOTE  
• As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Item  
Model: LC-26DV28UT  
26” Class (26” Diagonal)  
1,049,088 pixels (1366 x 768)  
Model: LC-32DV28UT  
32” Class (31 1/2” Diagonal)  
LCD  
Size  
panel  
Resolution  
TV  
TV-standard (CCIR)  
Receiving VHF/UHF  
American TV Standard ATSC/NTSC System  
VHF 2-13ch, UHF 14-69ch  
1-135ch (non-scrambled channel only.)  
Function  
Channel  
CATV  
Digital Terrestrial 2-69ch  
Broadcast (8VSB)  
Digital Cable*1  
1-135ch (non-scrambled channel only.)  
(64/256 QAM)  
Audio multiplex  
BTSC System  
Audio out  
5.0W x 2  
Terminals Side  
INPUT 1  
AV in, S-VIDEO in  
INPUT 2  
INPUT 3  
INPUT 4  
INPUT 5  
INPUT 6  
OUTPUT  
AV in  
COMPONENT in, Audio in (Share with INPUT 2)  
HDMI in with HDCP, Audio in  
HDMI in with HDCP  
15-pin mini D-sub female connector, Audio in (φ 3.5 mm stereo minijack)  
Analog audio output x 1  
Coaxial Digital audio output x 1 (PCM/Dolby Digital)  
ANT./CABLE  
75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV)  
and Digital (AIR/CABLE)  
OSD language  
Power Requirement  
Power Consumption  
Weight  
English/French/Spanish  
AC 120 V, 60 Hz  
65 W (0.5 W Standby with AC 120V)  
104 W (0.5 W Standby with AC 120V)  
26.1 Ibs./12.0 kg  
TV + stand  
TV only  
TV + stand  
TV only  
20.9 Ibs./9.5 kg  
17.8 Ibs./8.1 kg  
22.5 Ibs./10.0 kg  
Dimension*2  
(W x H x D)  
26 / x 20x 9 / inch  
31 / x 23 / x 9 / inch  
1
9
3
1
9
32  
16  
8
2
16  
1
13  
61  
3
1
1
32  
64  
64  
8
2
8
26 / x 18 / x 3 / inch  
31 / x 21 / x 4 / inch  
DVD  
Signal system  
Applicable disc  
NTSC  
section  
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)  
DVD : 4 Hz - 44K Hz / CD : 4 Hz - 20K Hz  
Below Measurable Level  
CD : Wavelength: 780 - 790 nm  
Maximum output power: 7 mW  
DVD : Wavelength: 652 - 662 nm  
Maximum output power: 5 mW  
Frequency response  
Wow and flutter  
Pickup  
Operating temperature  
+41°F to +104°F (+5°C to +40°C)  
*1 Emergency alert messages via Cable are unreceivable.  
*2 The dimensional drawings are shown on the inside back cover.  
• Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal  
brightness and temperature at 77°F/25°C.  
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of production  
units. There may be some deviations from these values in individual units.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling for Service  
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or  
customer assistance, please call 1-800-BE-SHARP.  
LIMITED WARRANTY  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the  
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,  
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the  
purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has  
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This  
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely  
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product  
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may  
vary. Please contact 1-888-GO-SHARP for further information.  
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of  
purchase to the servicer, which proof must include the date of purchase.  
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or  
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND  
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR  
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE  
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF  
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy  
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are  
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all  
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,  
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way  
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,  
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the  
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp  
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on  
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.  
Model Specific Section  
Your Product Model Number & Description:  
LC-26DV28UT/LC-32DV28UT Combination Liquid Crystal Television And  
DVD/CD player  
(Be sure to have this information available when you need service for your  
Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Exclusions from  
Warranty Coverage (if any):  
In order for the Product to be serviced, the Product must be readily available  
to the servicer, free and clear of any complex or non-standard installation,  
mounting or other encumbrance which would unreasonably interfere with  
servicing the Product. The Servicer will remount the Product after service,  
provided that such remounting is not into a complex or non-standard installa-  
tion. Any additional labor and materials required to remove and/or reinstall a  
Product above and beyond the foregoing are not covered by this warranty,  
may result in additional charges and are the responsibility of the consumer.  
Image Retention resulting from a fixed image being displayed for long  
periods of time is not covered by this Limited Warranty (see Operation  
Manual on how to prevent this).  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United States. To nd the  
location of the nearest Sharp Authorized Servicer, please call Sharp toll free  
at 1-800-BE-SHARP.  
What to do to Obtain Service:  
LC-32DV28UT  
Contact your Sharp Authorized Servicer to obtain in home service for this  
product. The Servicer will come to your location and if necessary remove the  
unit for repair at the Servicer’s facility and return the set to you once  
completed. Be sure to have Proof of Purchase available.  
Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure  
to have proof of purchase available. If you ship the Product, be sure it is  
insured and packaged securely. Please use two persons to carry the Product,  
transport it in its original packaging, and ensure that the Product is covered  
to avoid scratches and damage. Sharp shall not be responsible for lost,  
stolen or misdirected mail or for damage to the product incurred during  
shipping.  
LC-26DV28UT  
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  

SIIG Computer Hardware SATA II 150 User Manual
Sony Camcorder VCLHG1730A User Manual
Sony Clock Radio ICF C707 User Manual
Sony Flat Panel Television XBR 65X900A 55X900A User Manual
Sony Laptop BPLX55 BP User Manual
Sony Portable CD Player CFD 222L User Manual
Sony Stereo System AVD C70ES User Manual
Sony Universal Remote DAV SR2 User Manual
Stamina Products Home Gym 55 2010 User Manual
Sylvania Portable DVD Player DP170SL9 User Manual