ICS Sub 24 Powered Subwoofer
Owner‘s Manual
ICS Sub 24
Download from Www.Somanuals.com. All Manuals Search And Download.
S P E C I F I C A T I O N S
Frequency Response (±3dB)
Amplifier Power
23-200Hz; 20Hz at -6dB
450 watts
Crossover Low Pass for Subwoofer
Crossover High Pass for Line Out
Bass Unit
Variable from 50 to 150Hz
Fixed at 80Hz, 12dB/octave
Dual 12-inch (305mm) long throw cast chassis woofers
Double-wall 3/4-inch MDF. Internal Double-H bracing.
Black cloth covered grille
Cabinet Construction
Grille
Controls
Turn On switch with instant On and ten-minute Off delay, Phase Switch
and Front mounted volume control
Dimensions (HxWxD, feet installed)
303/4” x 171/2” x 221/4" (78.1cm x 44.45 x 56.51cm) – positioned vertically
191/4” x 29” x 221/4" (78.1cm x 44.45 x 56.51cm) – positioned horizontally
(depth includes grille and amplifier fins, feet account for 13/4” / 4.44cm of height)
Weight
116 lbs. (52.62kg)
Finish
Black utility finish, hand-sanded, hand-painted
4 cabinet feet
Accessories
I N T R O D U C T I O N
We designed the ICS Sub 24 for maximum output and
performance for today’s digital formats. With bass
extension to 20 Hz (-6dB), and output over 105 dB at an
average listening position in a 3,000 cubic foot room,
the ICS Sub 24 meets the demanding specifications of
THX Ultra 2.
In addition to powerful and sophisticated electronics
and drivers, the ICS Sub 24 offers outstanding flexibility.
The cabinet has been designed to function in either a
horizontal or vertical orientation and front-mounted
gain control provides easy access for subwoofer level
adjustments.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
L
R
L
R
70 Hz
1
00 Hz
60 Hz
125 Hz
50 Hz
150 Hz
THX INPUT
Bypasses Crossover
HIGH LEVEL IN FROM AMP
0°
PHASE
+
L
–
+
R
–
180°
ALWAYS ON
AUTO ON
HIGH LEVEL OUT TO MAIN SPEAKERS
12OV 60Hz 5A
ON
POWER
OFF
FUSE TYPE
T5A 250V
ICS Sub 24
POWERED SUBWOOFER
Manufactured under license from Lucasfilm Ltd.
Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.
13
12
8
9
1
2
3
7
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
L
R
L
R
70 Hz
100 Hz
60 Hz
125 Hz
50 Hz
150 Hz
4
THX INPUT
Bypasses Crossover
HIGH LEVEL IN FROM AMP
5
6
0°
PHASE
+
L
–
+
R
–
180°
ALWAYS ON
AUTO ON
HIGH LEVEL OUT TO MAIN SPEAKERS
12OV 60Hz 5A
10
ON
POWER
OFF
11
FUSE TYPE
T5A 250V
ICS Sub 24
POWERED SUBWOOFER
4
Download from Www.Somanuals.com. All Manuals Search And Download.
F E A T U R E S
Crossover Low-Pass Filter Control
Bass Drivers
This control sets the frequency of the low-pass filter,
and is fully adjustable from 50 to 150Hz. Bass sound
below the selected setting are directed to the ICS Sub 24
amplifier and speaker.
The ICS Sub 24 uses two 12-inch (305 mm) custom-built
bass unit with dual spiders, a coated paper cone with
butyl surround, and a die-cast aluminum chassis. The
driver has a front-mounted heat sink that draws heat
away from the voice coil, increasing power capacity.
Low Level Inputs
Use this input when your system has preamp outs and
amplifier inputs.
Phase Switch
Determines whether the subwoofer adds or cancels in
the crossover region. The proper setting changes based
upon the current location of the speaker.
Low Level High Pass Outputs
When the low level inputs are used, these outputs
provide the signal that goes to the power amplifier in
the system. The signal from these outputs is high pass
filtered to remove bass sound below 80 Hz.
Turn On Mode
This switch controls the automatic power up function.
When the switch is set to Auto On, the amplifier will
power up when it senses an input signal. If no input signal
is present, the amplifier switches to low power standby
mode after 8-10 minutes. The LED next to the Power switch
lights green when the amplifier is on, and yellow when it is
in standby mode. Put the switch in the Always On position
to defeat the automatic power down feature.
THX Input
This input is for use with receivers or surround sound
controllers that have built-in THX control systems. This
input bypasses the low pass filter and ALL the crossover
controls of the ICS Sub 24.
Speaker Level Inputs
Power Switch
The ICS Sub 24 also has high-level inputs that can be
used when preamp outputs/power amp inputs are not
available. The 5-way gold-plated terminals accept spade
lugs to 5/16 inch, pins, banana plugs, and up to 12-
gauge bare wire. When main speakers are connected to
the speaker level
The main power switch is located next to the power cord
socket. Push in the top side of the switch to turn on the
main power to the system. Push in the bottom side to
turn off the main power. Usually the only time the main
power switch should be turned off is when the sub-
woofer will not be used for an extended period of time,
such as when you are away on a vacation.
Speaker Level Outputs
These outputs provide signals for the main speakers
when the speaker level inputs are used. The signal from
this output is high pass filtered to remove bass informa-
tion below 80 Hz.
Handmade Cabinets
Our cabinet department hand assembles each unit, and
then hand sands each several times. The result is a
cabinet of exceptional workmanship, with sharp corners
and smooth sides.
Bass Level Control
The Bass Level control adjusts the sound level output of
the ICS Sub 24. It is located on the front of the cabinet,
behind the grille.
Veneers
We use premium, book-matched veneers, chosen for
grain consistency and aesthetics. Our cabinet shop
sequences the veneer, maintaining a match from the left
side, across the top, to the right side of the speaker. We
even veneer the inside of the cabinet so it won’t warp or
separate at the edges as the humidity changes .
To access the control grasp the top and bottom edges
of the grill and pull it straight off the front of the
cabinet. A typical setting for the control is around the
12 o’clock position.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N
Warning: To reduce the risk of electric shock, always switch off the subwoofer and the amplifier and or receiver when
making connections to the subwoofer and speakers.
THX® Input
Use this input when the ICS Sub 24 is connected
to a receiver or surround sound controller that
has a built-in THX control system. This input
bypasses ALL the crossover and control circuitry
of the ICS Sub 24.
THX Receiver
ICS Sub 24 Amp
HIGH PASS OUT
CROSSOVER
80 Hz
LOW LEVEL IN
L
R
L
R
70 Hz
100 Hz
60 Hz
125 Hz
SUB
OUT
50 Hz
150 Hz
THX INPUT
Bypasses Crossover
Non-THX Low Level Connection
When connecting the ICS Sub 24 to
electronics that does not have a THX control
system, use the low level (also called line
level) connections whenever possible. Even if
you do not have a separate preamp and
power amp, many receivers and integrated
amplifiers include ”Preamp Out“ and
”Amplifier In“ connectors.
ICS Sub 24 Amp
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
L
R
L
R
Amplifier, Receiver or
Preamp/Power Amp
70 Hz
100 Hz
60 Hz
125 Hz
50 Hz
150 Hz
AMP PREAMP
IN
OUT
THX INPUT
Bypasses Crossover
L
R
When using the low level connections, the
signal from the High Pass Outputs that is
returned to your amplifier is high pass filtered to remove sound below 80Hz. This is a non-adjustable filter. It is not
affected by the setting of the Crossover control. See the Fine Tuning section of this manual for more information.
Subwoofer Output Connection
Some electronics have monophonic subwoofer
outputs. If your system has this type of an output
it can be connected to either of the low level
inputs. The benefit of using this type of connec-
tion instead of using the THX input is that it does
not bypass the controls of the ICS Sub 24. You
can still use the level control to adjust the output
of the subwoofer. Typically such outputs are low
pass filtered, so you should set the ICS Sub 24
crossover control to it’s highest setting to
ICS Sub 24 Amp
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
L
R
L
R
Amplifier, Receiver or
Preamp/Power Amp
70 Hz
100 Hz
60 Hz
125 Hz
50 Hz
150 Hz
SUB
OUT
THX PUT
Bypasses rossover
Either Input
May Be Used
minimize its effect. If listening test show there is an excess of mid-bass sound you may want to use a lower crossover
control setting. See the “Fine-Tuning Your Subwoofer section for more information.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
High Level Connection
If the electronics in your system does not have Preamp Output/Power Amp Input connections, the ICS Sub 24 can be
connected via the speaker wiring using the “High Level” Connections. There are two methods for making high level
connections the ICS Sub 24.
The 5-way binding posts on the ICS Sub 24 permit easy connection to
banana plugs, spade lugs, and bare wire. If you are connecting bare wires
be sure to twist the wire strands into a neat bundle. Be sure there are no
loose strands that could touch another terminal and cause a short-
circuit.
NOTE: When making high level connections be sure to maintain proper polarity - that is
connect + to + (positive) to (positive) and - to - (negative) to (negative). All wire has one of its
conductors marked in some way to make it easy to trace the connections. Typically there is a stripe
on the insulation or a rib molded into it. Or the insulation will be transparent and the wire strands of one conductor
will be copper colored and the other will be silver colored.
Preferred Connection Method
The preferred method for making high level
connections is to connect the speaker outputs of
your amplifier to the High Level inputs of the ICS
Sub 24, and then connect the main speakers to the
High Level Outputs. This is the best connection
method because the High Level Outputs are high
pass filtered - the low bass sound is removed. The
reduces the portion of the sound range the main
speakers must reproduce and makes it easier to
adjust the system for a smooth main speaker-to-
subwoofer transition.
Amplifier, Receiver or
Preamp/Power Amp
L
R
HIGH LEVEL IN FROM AMP
+
0°
-
PHASE
+
L
–
+
R
–
180°
ALWAYS ON
AUTO ON
HIGH LEVEL OUT TO MAIN SPEAKERS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Alternate High Level Connection
The alternate method for making high level connections is to connect both the ICS Sub 24 and the main speakers
directly to the amplifier. This type of connection does not take advantage of the high pass filter provided by the High
Level Outputs of the ICS Sub 24. Consequently the main speakers will operate full range.
There are two connection methods. Both methods are electrically equivalent. Which one you use will depend largely
on you physical set up of your room.
One method is to connect both the main speakers
and the ICS Sub 24 directly to the amplifier.
Amplifier, Receiver or
Preamp/Power Amp
L
R
HIGH LEVEL IN FROM AMP
+
0°
-
PHASE
+
L
–
+
R
–
180°
ALWAYS ON
AUTO ON
HIGH LEVEL OUT TO MAIN SPEAKERS
The other method is to connect the amplifier to the
main speakers and then run extension wires from the
main speakers to the ICS Sub 24.
Amplifier, Receiver or
Preamp/Power Amp
L
R
HIGH LEVEL IN FROM AMP
+
0°
-
PHASE
+
L
–
+
R
–
180°
ALWAYS ON
AUTO ON
HIGH LEVEL OUT TO MAIN SPEAKERS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TWO ICS Sub 24’s
You may wish to use two ICS Sub 24’s, particularly if you are in a large room.
ꢀ
Double subwoofers may be wired
with either speaker-level or line-level
connections.
ꢀ
Be sure the Phase Switch is set the
same on both units.
To connect two ICS Sub 24’s using line-
level inputs, use "Y" connectors to daisy
ICS Sub 24
Amp
ICS Sub 24
Amp
chain the ”PREAMP OUT“ signal to the
input of a second ICS Sub 24.
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
CROSSOVER
80 Hz
LOW LEVEL IN
HIGH PASS OUT
L
R
L
R
L
R
L
R
70 Hz
100 Hz
70 Hz
100 Hz
60 Hz
125 Hz
60 Hz
125 Hz
Amplifier, Receiver or
Preamp/Power Amp
50 Hz
150 Hz
50 Hz
150 Hz
THX INPUT
THX INPUT
Bypasses Crossover
Bypasses Crossover
AMP PREAMP
IN
OUT
L
R
To connect two ICS Sub 24’s using speaker-level inputs, use the ”HIGH LEVEL IN FROM AMP“ binding posts on one
subwoofer to daisy chain to the second ICS Sub 24.
Amplifier, Receiver or
Preamp/Power Amp
L
R
HIGH LEVEL IN FROM AMP
HIGH LEVEL IN FROM AMP
+
0°
0°
-
PHASE
PHASE
+
L
–
+
R
–
+
L
–
+
R
–
180°
180°
ALWAYS ON
AUTO ON
ALWAYS ON
AUTO ON
Connect the main speakers
directly to the system's
amplifier to run the main
speakers full range.
HIGH LEVEL OUT TO MAIN SPEAKERS
HIGH LEVEL OUT TO MAIN SPEAKERS
Connect the main speakers to the
High Level Outputs to take
advantage of the high pass filter
in the ICS Sub 24 amp.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
P L A C E M E N T
Typically the ICS Sub 24 will produce the smoothest response when placed against a wall. Placement in a corner will
further enhance bass output allowing you to run operate the subwoofer at a lower power level. Experiment with
subwoofer placement while at the same time adjusting crossover frequency, output level, and phase. (See section on
Fine-Tuning Your Subwoofer below.)
Choose a musical selection with a heavy and continuous bass line. Play a short section several times until you have a
firm impression of it in your mind. Then try another location to see if it provides smoother or more balanced response .
Repeat this process until you are content with the bass response you are getting. Strive for a smooth, solid bass
response that does not emphasize any part of the bass range.
Once a location for the subwoofer has been selected, you may want to attach the supplied cabinet feet. There are two
side of the cabinet that have pre-drilled pilot holes for the feet. This enables you to use either a vertical or horizontal
orientation.
Note: Avoid placing the ICS Sub 24 close to a television or monitor. There should be at least 8 inches (20cm) between
the two components. If getting the best sound, together with the physical constrains of the room, require that the
two units must be closer than that you can purchase a magnetic shielding kit from Snell Acoustics.
F I N E - T U N I N G Y O U R S U B W O O F E R
Note: If you are connecting the ICS Sub 24 to a THX receiver/controller, use the THX input. (See the “THX Input”
section on page 6.) This bypasses all the crossover circuits and level controls in the amplifier. All audio controlling is
done by the THX receiver/controller.
Setting the Internal Crossover
When using the standard Low Inputs or High Level inputs you will need to adjust the internal crossover to make the
ICS Sub 24 sonically blend with the main speaker in the system.
If you are using line-level inputs and returning the high-pass filtered signal to the amplifier (see the diagram on page
6), begin by setting the crossover at 100Hz. Some rooms naturally overemphasize bass in this region, creating an
undesirable ”bump“ or ”boomy“ quality in the sound. If this is the case with your room, try turning the crossover down
to 80Hz. On the other hand‚ some rooms have a natural tendency to ”swallow up“ the bass in the 100Hz region,
causing the sound to appear thin. In rooms of this type, try setting the crossover at 125Hz. This may help to round out
the overall sound.
If you are running your main speakers full range, set the crossover close to the bass cut-off frequency of your main
speakers. See the specifications for your main speakers for information. This will help achieve a smooth, seamless
blend between your speakers and the subwoofer. Experiment until you are happy with the main speaker-to-subwoofer
transition.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Bass Level Control
The Bass Level control adjusts the volume of the ICS Sub 24 output. The Level Control should be adjusted to achieve a
good main speaker-to-subwoofer balance. However there is significant interaction between the Crossover control and
the Bass Level control. This interaction affects the sound in the midbass range where the transition from the main
speakers to the subwoofer occurs. If you are hearing too much midbass, adjust the crossover frequency down while
increasing the bass level. This decreases midbass output while increasing the amount of lower bass energy. Conversely,
turning down the bass level while slightly increasing the crossover frequency will increase the ratio of mid bass-to-low
bass sound. The result will be a sound with a ”quick“ quality. Experiment while listening to a variety of sources. Adjust
the ICS Sub 24 Crossover and Bass Level controls until you achieve a smooth and seamless blend with the main
speakers .
Setting the Phase
The proper setting for the Phase Switch changes based upon the location of the speaker. To determine the correct
setting for your room, use a source with a full and continuous bass line. Have a second person repeatedly switch the
Phase Switch from one position to the other. You will notice that one position will deliver stronger midbass sound. This
is the proper position for the Phase Switch. If the midbass now seems too prominent, compensate by slightly lowering
the crossover frequency or the output level.
How To Care For Your Speakers
➤ Use a soft terry cloth towel slightly dampened with water, glass cleaner, or a diluted mild detergent. The towel
should be just damp enough to wipe the surface clean without leaving a trail of moisture.
➤ Do not use abrasive cleaners or any cleaner containing chemicals harsher than those found in glass cleaner.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L I M I T E D W A R R A N T Y
During the warranty period, Snell Acoustics will repair, for the original owner, any defect in materials or workmanship
that occurs in normal use of the speaker system, without charge for parts and labor. The warranty period for all parts
of the ICS Sub 24, except the amplifier, is five (5) years. The warranty period on the amplifier is one (1) year.
Your responsibilities are to use the product according to the instructions supplied, to provide safe and secure transpor-
tation to an authorized Snell Acoustics service representative, and to present proof of purchase from an authorized
Snell dealer in the form of your sales slip when requesting service.
Excluded from this warranty is damage that results from abuse, misuse, accidents, shipping, repairs, or modifications
by anyone other than an authorized Snell Acoustics service representative. This warranty is void if the serial number
has been removed or defaced.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
If Service Seems Necessary
Contact the dealer from whom you purchased the speaker system. If that is not possible, call us at
978-538-6262, or write to:
Snell Acoustics
300 Jubilee Drive, PO Box 3717
Peabody, MA 01961-3717
We will promptly advise you of what action to take. If it is necessary to return your speaker system to the factory,
please ship it prepaid in the original factory packaging. Please note that Snell Acoustics will not be held liable for
shipping damage due to improper packaging. After it has been repaired, we will return it freight-prepaid in the U.S. or
Canada.
©2003 Snell Acoustics.
All Rights Reserved.
Specifications are subject
to change without notice.
Covered by patents issued
and or pending.
300 Jubilee Drive, P0B 3717
Peabody, MA 01961-3717
phone: 978-538-6262
fax:
978-538-6266
Manufactured under license from Lucasfilm Ltd.
Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.
email: [email protected]
Part #542-1024
Download from Www.Somanuals.com. All Manuals Search And Download.
|