Snapper VCR 10305 User Manual

Parts Manual for  
TWO STAGE  
LARGE FRAME  
SNOW THROWER  
SERIES 5  
MODELS  
8245 10305  
8265 11305  
E8265 10305E  
9265 E10305  
E9265 E10305E  
E11305  
MODEL 10305E  
SHOWN  
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE  
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD  
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH  
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.  
COPYRIGHT © 2000  
SNAPPER INC.  
ALL RIGHTS RESERVED  
(Rev. 5, 7/03/00)  
MANUAL No. 06037  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUGERS, IMPELLER  
RIGHT SIDE  
GEARBOX, SHAFTS  
(See Pages 8 – 9)  
LEFT SIDE  
ITEM  
PART NO.  
DESCRIPTION  
1
-
4-9928  
4-9935  
4-9922  
AUGER, Right Side (8245 Models)  
AUGER, Right Side (8265, 9265 & E9265 Models)  
-
AUGER, Right Side (10305E, E10305E, N10305E, 11305 &  
E11305 Models)  
2
3
4
5
-
1-3864  
9-1550  
9-1298  
4-9927  
4-9936  
4-9921  
FITTING, Grease (2)  
BOLT, 5/16-18 x 1-7/8" Shear (2)  
NUT, 5/16-18 Hex Nyloc (2)  
AUGER, Left Side (8245 Models)  
AUGER, Left Side (8265, 9265 & E9265 Models)  
-
AUGER, Left Side (10305E, E10305E, N10305E, 11305  
E11305 Models)  
6
4-9677  
1-3862  
5-1350  
9-0699  
9-1065  
1-0817  
2-8221  
FAN, Impeller  
7
PIN, 1/4 x 1-1/2" Roll (2)  
8
ASSEMBLY, Bearing (Includes Item 11)  
BOLT, 1/4-20 x 3/4" Hex Flange Lock, Grade 5 (6)  
NUT, 1/4-20 Hex Flange Lock (6)  
FITTING, Grease (2)  
9
10  
11  
12  
SPACER (Used on Model 8245 Models Only) (2)  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISCHARGE CHUTE  
#10-32 HEX JAM NUTS and  
#10 LARGE OUTSIDE DIAMETER  
FLAT WASHERS  
24  
14  
(PART OF CONTROL CABLE)  
25  
23  
9
6
3
26  
4
19  
8
22  
2
21  
25  
16  
18  
7
15  
19  
14  
17  
5A  
6
20  
5B  
1
13  
12  
10  
11  
COLLECTOR HOUSING  
MANUAL No. 06037  
LARGE FRAME SNOWTHROWER  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISCHARGE CHUTE  
ITEM  
1
PART NO.  
2-8208  
2-8217  
2-4773  
2-8235  
2-8184  
2-8253  
1-6324  
3-5744  
9-1076  
9-1072  
9-1021  
9-1074  
3-9765  
4-7855  
1-1938  
9-1077  
9-1070  
9-1075  
9-1069  
3-2813  
9-1064  
9-1023  
9-1100  
4-5172  
9-1099  
9-1098  
2-3798  
1-9692  
2-3673  
3-2559  
DESCRIPTION  
CHUTE, Discharge  
--  
CHUTE, Remote Control Discharge (8245 Model Only)  
DECAL, Hand Danger  
2
3
DEFLECTOR, Remote Control Discharge  
DEFLECTOR (8245 Model Only)  
PIN, Hinge  
--  
4
5A  
5B  
6
T-KNOB (Plastic)  
T-KNOB (w/5/16-18 insert)  
WASHER, 5/16 Flat (2)  
7
BOLT, 5/16-18 x 1” Square Neck Carriage, Grade 5  
SCREW, 5/16-24 x 3/4" Hex Head Cap, Grade 5 (3)  
NUT, 5/16-24 Hex Center Lock, Grade B  
RING, Chute (59 Tooth, 229 Degrees)  
RING, Chute (Euro) (48 Tooth, 187 Degrees)  
RETAINER (Chute Ring to Housing) (2)  
BOLT, 5/16-18 x 5/8" Square Neck Carriage, Grade 5 (3)  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)  
SCREW, #10-24 x 5/8" Hex Washer Self-Tap, Grade 5 (8)  
NUT, 5/16-18 Hex, Grade B or 5  
MOUNT, Cable  
8
9
10  
--  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (2)  
WASHER, 1/4” Internal Tooth Lock (2)  
NUT, 1/4-20 Hex (3)  
CABLE, Control  
NUT, 1/4-20 Hex Center Lock, Grade B or 5  
WASHER, 1/4 Flat (2)  
BOLT, 1/4-20 x 1-1/2" Eye  
WIRE, Safety  
PUSH-ON Fastener, 5/32” Dia. (2)  
RETAINER, Safety Wire (2)  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLLECTOR HOUSING  
30  
12  
11  
9
8
14  
22  
18  
10  
13  
2
16  
27  
32  
31  
7
20  
21  
6
4
13  
28  
19  
29  
5
15  
25  
23  
26  
3
24  
22  
21  
5
17  
22  
20  
25  
1
19  
5
MANUAL No. 06037  
LARGE FRAME SNOWTHROWER  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLLECTOR HOUSING  
ITEM  
PART NO.  
DESCRIPTION  
1
--  
--  
5-2134  
5-2135  
5-3421  
ASSEMBLY, 24" Blower (8245 Models) (Includes 1-6578 Decal)  
ASSEMBLY, 26" Blower (8265 & 9265 Models) (Incl. 1-6578 Decal)  
ASSEMBLY, 30" Blower (10305E & 11305E Models) (Includes 2-6629 Decal)  
2
3-3035  
GUIDE, Cable (8265, 9265, E9265, 10305E, E10305E, N10305E),  
11305 & E11305)  
3
4
5
9-1021  
9-1074  
9-1070  
SCREW, 5/16-24 x 3/4” Hex Head Cap, Grade 5  
NUT, 5/16-24 Hex Center Lock, Grade B  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (9)  
6
--  
2-8280  
2-8711  
DECAL, Danger Rotating Auger  
DECAL, Foot Danger (Euro)  
7
8
2-8281  
3-4303  
1-2117  
1-4001  
2-8222  
4-2809  
1-1724  
2-8348  
9-0539  
9-0858  
3-8009  
9-1082  
3-7982  
9-0324  
1-6360  
9-0001  
9-0731  
DECAL, Heavy Duty Snow  
BRACKET, Worm Shaft Support  
BUSHING  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
PIN, 1/8 x 3/4" Roll  
CONNECTOR  
SHAFT, Worm (3/8-16 threaded)  
WASHER, 13/32 Spring (2)  
WORM  
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap  
SCREW, 5/16-18 x 1/2" Hex Washer Self-Tap (2)  
BAR, Stiffener (10305E, 11305 & E11305 Models Only)  
PIN, 3/32 x 3/4" Cotter  
SHOE, Skid (2)  
SCREW, 3/8-16 x 1" Hex Washer Self-Tap (2)  
WASHER, 3/8” Flat  
BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 (11)  
BOLT, 5/16-18 x 1/2" Short Neck Carriage, Grade 5 (5)  
24  
--  
--  
3-6122  
3-9770  
3-6006  
BLADE, Scraper (8245 Models)  
BLADE, Scraper (8265 & 9265 Models)  
BLADE, Scraper (10305E, 11305 & E11305 Models)  
25  
26  
9-1076  
2-8177  
WASHER, 5/16 Flat  
BRACKET, Worm  
27  
--  
4-2894  
4-2895  
PLUG, Dome 5/16” (2)  
PLUG, 5/16” Dome (2)  
28  
29  
30  
31  
32  
9-1514  
9-1585  
3-7971  
9-0187  
9-0196  
WASHER, 3/8” Flat  
NUT, 3/8-16 Hex Center Lock, Grade 5 or B  
DRIFT CUTTER (2)  
WASHER, 5/16 Split Lock (4)  
NUT, 5/16-18 Hex (4)  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BELTS, IDLER, DRIVE PLATE, SHEAVE  
27  
26  
18  
23  
5
1
4
6
ENGINE PULLEY  
(See Page 20)  
7
12  
10  
8
9
11  
3
2
10  
25  
IDLER  
(See Page 20)  
14  
17  
28  
29  
15  
13  
20  
13  
16  
21  
22  
24  
22  
19  
18  
24  
23  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
BELTS, IDLER, DRIVE PLATE, SHEAVE  
ITEM  
1
PART NO.  
5-3580  
9-1559  
1-3859  
1-3919  
9-0791  
9-0122  
1-3850  
9-0499  
9-1069  
1-6314  
1-3849  
9-1072  
1-3931  
1-3924  
9-0001  
9-1070  
1-3867  
1-3937  
1-3939  
1-0776  
1-3861  
5-1358  
1-4295  
1-3936  
2-9101  
1-4296  
9-0187  
1-7734  
9-1122  
3-4302  
1-1791  
DESCRIPTION  
ASSEMBLY, Idler Arm (Includes Items 2 & 3)  
RIVET (2)  
2
3
PAD, Brake  
4
SPRING  
5
BOLT, 3/8-16 x 1-1/2" Square Neck Carriage, Grade 2  
WASHER, 3/8 Flat  
6
7
PULLEY, Idler  
8
NUT, 3/8-16 Hex Top Lock  
9
NUT, 5/16-18 Hex, Grade B or 5  
WASHER, 5/16 x 1-1/4" Flat  
10  
11  
12  
13  
14  
15  
16  
17  
18  
--  
SPACER  
BOLT, 5/16-18 x 1" Square Neck Carriage, Grade 5  
HOUSING, Bearing  
BEARING (Includes Two #10-32 Socket Set Screws)  
BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)  
SHEAVE, Blower (Includes Two 5/16 Set Screws)  
BELT, Blower (All Models with Briggs Engines)  
BELT, Blower (All Models with Tecumseh Engines)  
RING, 1/2 External Snap (Heavy Duty)  
KEY, #11 Woodruff  
19  
20  
21  
22  
23  
--  
PLATE, Drive (Includes Item 22)  
BEARING, Ball (2)  
BELT, Traction (All Models with Briggs Engines)  
BELT, Traction (All Models with Tecumseh Engines)  
WASHER, 1/2 Shim (4) (Used with Item 21) (4)  
WASHER, 5/16 Split Lock  
24  
25  
26  
27  
28  
29  
COVER, Belt Guard  
SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap  
WASHER, 3/4 x 1-1/8" Flat  
RETAINER, 5/16 Bolt  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX, SHAFTS  
6
5
8
7
4
2
1
15  
11  
9
1
4
3
12  
14  
11  
5
16  
13  
10  
NOTE: USE 4 OZ. OF #2-9577  
BENALENE 900 GREASE  
FOR LUBRICATION.  
17  
18  
19  
20  
21  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX, SHAFTS  
ITEM  
PART NO.  
DESCRIPTION  
1*  
-
-
2-8220  
2-7639  
2-9552  
SHAFT, Auger (8245 Models)  
SHAFT, Auger (8265 & 9265 Models)  
SHAFT, Auger (10305E, 11305 & E11305 Models)  
2
1-3857  
5-1305  
1-3855  
1-3858  
1-8451  
9-0290  
1-3854  
1-9674  
9-0815  
2-7630  
1-3313  
1-3862  
1-3856  
1-3861  
2-7606  
1-0935  
1-2252  
1-3853  
1-8450  
9-1075  
KEY, 1/4 x 7/8" Woodruff  
GEAR, Worm  
3
4
WASHER, 1.0 x 1-1/2" Thrust (2)  
SEAL, 1-1/2” O.D. Oil (2)  
COVER, Gear Case  
5
6
7
SCREW, 1/4-20 x 3/4" Hex Washer Self-Tap (4)  
O-RING, Case Cover  
8
9
CASE, Gear  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
SCREW, 3/8-16 x 1/2" Hex Washer Self-Tap  
SHAFT, Impeller  
BEARING, Impeller Shaft  
PIN, 1/4 x 1-1/2" Roll  
SPACER, Gear Bearing  
KEY, 3/16 x 7/8" Woodruff  
GEAR, Rolled Worm  
WASHER, 3/4 x 1-1/8" Thrust (2)  
BUSHING, Impeller Shaft  
O-RING, Case Cap  
CAP, Case  
SCREW, #10-24 x 5/8" Hex Washer Self-Tap (3)  
*NOTE:  
The following assemblies are made  
of items 1 through 21 above:  
5-3426, 24” Gear Case Assembly  
5-7305, 26” Gear Case Assembly  
5-7304, 30” Gear Case Assembly  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRAME, TRACTION DRIVE  
CLUTCH LEVER  
(See Pages 16 – 19)  
43  
3
25  
1
39  
2
41  
5
40  
6
40  
40  
38  
20  
39  
38  
7
39  
4
41  
40  
24  
21  
42  
22  
19  
26  
36  
8
23  
35  
46  
44  
37  
18  
2
44  
44  
33  
11  
10  
12  
1 (Ref.)  
15  
16  
32  
31  
17  
19  
30  
9
27  
WHEELS  
& HUBS  
(Page 21)  
28  
14  
19  
34  
29  
9
CHAIN CASE  
(See Pages 14 & 15)  
13  
45  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRAME, TRACTION DRIVE  
ITEM  
1
PART NO.  
1-9684  
1-2117  
1-3887  
3-9768  
3-7967  
1-3872  
3-2124  
3-4306  
1-5363  
1-3874  
1-0756  
3-2121  
3-9769  
1-8460  
2-7610  
1-0614  
1-3884  
3-2120  
2-8209  
5-7276  
3-7965  
3-2130  
1-2264  
2-1843  
9-1082  
1-3875  
1-3878  
1-3861  
3-4302  
9-1064  
9-1065  
9-0858  
1-1763  
1-0690  
9-0001  
9-1612  
1-1791  
9-0206  
9-1067  
1-6314  
1-3849  
9-1084  
9-1302  
9-0361  
9-0362  
3-4303  
DESCRIPTION  
ROD, Activating  
BUSHING (2)  
2
3
ROD, Lower Shift  
COVER, Frame Back  
LEVER, Shift  
4
5
6
STUD, Shift Lever  
BELLCRANK, Traction  
7
8
FRAME (Order Items 9 & 10 When Replacing)  
BUSHING, Axle Shaft (2)  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
BUSHING, Hex Shaft  
BEARING  
RETAINER, Bearing  
COVER, Frame Bottom  
GEAR, Axle Shaft  
SHAFT, Hex  
KEY, 1/8 x 5/8" Woodruff  
PINION, Hex Shaft  
BRACKET, Idler Mounting  
SHAFT, Axle  
BRACE, Frame (10305E, 11305 & E11305 Models Only)  
BRACKET, Clutch  
BRACKET, Spring  
SPRING  
SHAFT, Cross  
PIN, 3/32 x 3/4" Cotter  
ROD, Push  
PIN, 3/16 x 1-1/4" Roll (2)  
KEY, 3/16 x 7/8" Woodruff  
WASHER, 3/4 x 1-1/8" Flat  
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (2)  
NUT, 1/4-20 Hex Flange Lock  
SCREW, 5/16-18 x 1/2" Hex Washer Self-Tap (3)  
WASHER, 5/16 x 1" Flat  
WASHER, 5/8 Shim  
BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 (3)  
BOLT, 5/16-18 x 1-1/2" Sqare Neck Carriage, Grade 5  
RETAINER, 5/16 Bolt (4)  
SCREW, 5/16-18 x 3/4" Hex Head Cap, Grade 2  
NUT, 5/16-18 Hex Center Lock, Grade B (3)  
WASHER, 5/16 x 1-1/4" Flat (4)  
SPACER, 5/16 x 5/8" (2)  
SCREW, 1/4-20 x 3/8" Hex Washer Self-Tap  
NUT, 3/8-16 Hex, Grade B or 5  
SCREW, 5/16-18 x 5/8" Hex Washer Self-Tap (20)  
SCREW, 1/4-20 x 5/8" Hex Washer Self-Tap (4)  
BRACKET, Worm Shaft  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAIN CASE (TRACTION DRIVE)  
1
17  
19  
20  
18  
21  
CHAIN CASE ASSEMBLY  
13  
12  
14  
5
11  
22  
4
14  
16  
15  
6
5
3
9
2
7
8
10  
8
HEX SHAFT  
(See Item #15, Pages 12- 13  
7
NOTE: USE “00” GREASE  
FOR LUBRICATION  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAIN CASE (TRACTION DRIVE)  
ITEM  
PART NO.  
DESCRIPTION  
1
5-1269  
ASSEMBLY, Chain Case (Includes Items 2 Thru 22)  
2
3-3543  
9-0913  
2-8761  
1-0756  
1-0940  
1-3881  
1-3882  
1-0941  
4-0465  
4-7776  
2-0908  
1-0776  
1-1121  
1-0614  
9-0356  
5-0614  
1-0765  
9-0731  
2-0911  
9-0585  
1-1024  
COVER, Sprocket  
3
SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)  
GASKET  
4
5
BEARING, Ball (2)  
6
ASSEMBLY, Shaft & Sprocket  
BUSHING (2)  
7
8
WASHER, Thrust (2)  
9
CHAIN  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
ASSEMBLY, Hub & Sprocket  
CHASE, Sprocket  
ROLLER  
RING, 1/2” External Snap (Heavy Duty)  
WASHER, Belleville (3)  
KEY, 1/8 x 5/8" Woodruff  
NUT, 5/8-18 Hex Center Lock Jam  
ASSEMBLY, Drive Disc (Includes Items 18 Thru 22)  
DISC, Drive  
BOLT, 5/16-18 x 1/2" Short Neck Carriage, Grade 5 (3)  
HUB  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)  
PLUG  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLES, CONTROLS (MODELS 8245)  
7
23  
22  
13  
18  
17  
16  
21  
24  
4
11  
25  
34  
12  
3
29  
6
35  
29  
10  
16  
15  
30  
6
4
31  
30  
2
27  
2
26  
27  
28  
5
10  
5
19  
20  
14  
9
32  
1
34  
8
33  
33  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLES, CONTROLS (MODELS 8245)  
ITEM  
1
PART NO.  
3-2922  
3-2921  
3-2908  
2-8189  
2-8223  
9-1020  
9-1074  
1-3887  
1-6304  
1-4297  
1-6334  
4-0660  
3-7962  
3-4305  
1-2117  
2-8215  
1-3901  
9-1067  
2-8214  
4-5177  
4-5183  
3-2923  
3-2907  
2-3933  
9-1076  
9-1065  
9-0244  
9-1066  
9-0303  
9-1067  
1-6297  
9-1025  
9-1064  
9-1071  
9-1070  
9-0041  
9-1149  
DESCRIPTION  
BAR, Right Side Handle  
2
BRACKET, Handle (2)  
3
HANDLE, Right Side  
4
GRIP, Handle (2)  
5
CABLE, Clutch (2) (Includes Chain & Spring)  
NUT, 1/4 Push (2)  
6
7
NUT, 5/16-24 Hex Center Lock, Grade B  
ROD, Lower Shift  
8
9
CONNECTOR  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
--  
ROD, Upper Shift  
KNOB, Shift Handle  
HANDLE, Shift  
BRACKET, Shift Lever  
PANEL, Control  
BUSHING  
CRANK, Chute  
KNOB, Chute Crank  
NUT, 5/16-18 Hex Center Lock, Grade B (4)  
DECAL, Control- 8/24  
DECAL, Control- 9/26  
--  
DECAL, Control- E9/26  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
BAR, Left Side Handle  
HANDLE, Left Side  
SPRING, Shift Lever  
WASHER, 5/16 Flat  
NUT, 1/4-20 Hex Flange Lock (3)  
SCREW, 5/16-24 x 1-3/4" Hex Head Cap, Grade 2  
SCREW, 5/16-18 x 1-1/2" Hex Head Cap, Grade 5 (4)  
NUT, 1/4-28 Hex Top Lock (2)  
NUT, 5/16-18 Hex Center Lock, Grade B  
PIN, 1/4 x 1-7/8" Clevis  
SCREW, 1/4-28 x 1-3/8" Hex Head Cap, Grade 5 (2)  
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (3)  
NUT, 3/8-16 Hex, Grade B  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)  
PIN, 1/8 x 1" Cotter  
WASHER, 3/8 Flat  
(NOTE: See Pages 18 Thru 19 for Models 8265, 9265 & 10305E)  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLE, CONTROLS (8265, 9265, 10305E, 11305 & E11305 MODELS)  
47  
4
3
46  
41  
42  
45  
9
2
18  
17  
16  
6
43  
3
14  
10  
40  
7
44  
36  
14  
15  
9
8
20  
11  
13  
9
1
37  
8
16  
15  
13  
6
48  
29  
21  
32  
33  
39  
20  
8
19  
20  
12  
27  
28  
7
22  
24  
34  
31  
30  
26  
53  
50  
7
23  
38  
25  
23  
52  
29  
51  
9
38  
35  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLE, CONTROLS (8265, 9265, 10305E, 11305 & E11305 MODELS)  
ITEM  
1
2
3
4
5
6
7
8
PART NO.  
3-2922  
3-2923  
1-1870  
3-2907  
1-6573  
1-6297  
1-6311  
9-1066  
9-1067  
3-3006  
1-2117  
9-0041  
9-1025  
9-1020  
3-2921  
9-0303  
2-8215  
1-3901  
9-0074  
9-1065  
1-5960  
3-2651  
1-3849  
9-1085  
3-2910  
9-0548  
9-0623  
3-8352  
1-6310  
1-5966  
1-5969  
1-8980  
9-0055  
9-1099  
1-6314  
3-2908  
9-1064  
9-1070  
2-8278  
4-5177  
4-5183  
2-8279  
2-8695  
7-3483  
7-3482  
1-6334  
4-0660  
3-7962  
9-1074  
9-1076  
2-3933  
9-0244  
6-1191  
9-1064  
1-4940  
1-6312  
1-6304  
9-1071  
9-1149  
DESCRIPTION  
BAR, Handle (Right Side)  
BAR, Handle (Left Side)  
GRIP, Handle (2)  
HANDLE, Left Side  
DECAL, Traction Clutch  
PIN, 1/4 x 1-7/8" Clevis (2)  
CABLE, Left Side Clutch  
SCREW, 5/16-18 x 1-1/2" Hex Head Cap, Grade 5 (4)  
NUT, 5/16-18 Hex Center Lock, Grade B (5)  
PANEL, Control  
BUSHING  
PIN, 1/8 x 1" Cotter  
SCREW, 1/4-28 x 1-3/8" Hex Head Cap, Grade 5 (2)  
NUT, 1/4 Push (2)  
BRACKET, Handle (2)  
NUT, 1/4-28 Hex Top Lock (2)  
CRANK, Chute  
KNOB, Chute Crank  
BOLT, 1/4-20 x 3/4" Short Neck Carriage, Grade 5 (2)  
NUT, 1/4-20 Hex Flange Lock (3)  
GUIDE, Cable  
BRACKET, Cable Guide Support  
SPACER, 5/16” (3)  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
--  
BOLT, #10-24 x 1/2" Flat Head Carriage (2)  
LEVER, Clutch  
SCREW, 1/4-20 x 1" Hex Head Cap, Grade 5  
NUT, #10-24 Hex Flange Lock (2)  
BRACKET, Cam  
CABLE, Auger (Right Side)  
SPRING Cam Lock  
SPACER  
LOCK, Cam  
WASHER, 1/4 Flat  
NUT, 1/4-20 Hex Center Lock, Grade B or 5  
WASHER, 5/16 x 1-1/4" Flat (3)  
HANDLE, Right Side  
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (2)  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)  
DECAL, Instruction 8265  
DECAL, Instruction 9265  
--  
--  
--  
--  
DECAL, Instruction E9265  
DECAL, Instruction 10305E  
DECAL, Instruction E10305E & N10305E  
DECAL, Instruction 11305  
DECAL, Instruction E11305  
KNOB, Shift Handle  
WELDMENT, Shift Handle  
BRACKET, Shift Lever  
NUT, 5/16-24 Hex Center Lock, Grade B  
WASHER, 5/16” Flat  
--  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
SPRING  
SCREW, 5/16-24 x 1-3/4" Hex Head Cap, Grade 5  
KIT, Light Assembly (Rectangular) (2)  
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (2)  
TIE, Cable  
ROD, Upper Shift  
NOTE: See Pages 16 Thru 17  
NUT, 3/8-16 x 1-13/16 Connector  
NUT, 3/8-16 Hex, Grade B  
WASHER, 3/8 Flat  
For Models 8245.  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINES, PULLEY, IDLER  
3
9
20  
4
10  
18  
22  
21  
1
12  
19  
10  
8
17  
5
11  
13  
14  
15  
16  
7
2
6
ITEM  
1
2
P/N  
DESCRIPTION  
3-8545 GUARD, Engine  
3-2128 ARM, Idler  
ENGINE SPECS  
used on:  
3
4
5
6
1-7734 COVER, Belt  
8 HP Tecumseh  
Model HMSK80  
Type 155527V....... 8245, 8265 &  
E8265  
9-0196 NUT, 5/16-18 Hex, Grade B or 5 (4)  
1-0210 KEY, 1/4 x 2" Square  
1-3850 IDLER  
7
2-8212 SPRING, Idler  
8
9
3-2150 FINGER, Belt  
9 HP Tecumseh  
Model HMSK90  
Type 156519D........9265 &  
E9265  
9-1122 SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap (2)  
9-0954 SCREW, 5/16-18 x 5/16" Socket Head Set (4)  
9-0791 BOLT, 3/8-16 x 1-1/2" Square Neck Carriage, Grade 2  
9-1076 WASHER, 5/16 Flat (5)  
1-3849 SPACER  
1-6314 WASHER, 3/8 Flat  
9-1273 SCREW, 5/16-24 x 7/8" Hex Head Cap, Grade 5  
9-0499 NUT, 3/8-16 Hex Top Lock  
1-5376 PULLEY, Blower  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
10 HP Tecumseh  
Model HMSK100  
Type 159236W.......10305E &  
E10305E  
Type 159302W.......N10305E  
1-5377 PULLEY, Traction  
Type 159426W  
10305 &  
E10305  
9-1021 SCREW, 5/16-24 x 3/4" Hex Head Cap, Grade 5  
1-5368 CORD, 10’ Extension for 110V (10305 & 10305E Models  
Only)(Tecumseh Part Number 1A174-17)  
7-2611 CORD, 8’ Extension for 230V (E9265 & E10305 Models)  
9-1076 WASHER, 5/16 Flat (4)  
9-0187 WASHER, 5/16 Split Lock (4)  
2-8747 MUFFLER GUARD, Tecumseh 8 & 10 HP (not shown)  
(Tecumseh Part Number 127-20)  
11 HP Tecumseh  
Model OHSK110  
Type 221721B........11305 &  
E11305  
--  
21  
22  
23  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHEELS, HUB  
2
6
3
5
7
8
9
4
ITEM PART NO. DESCRIPTION  
1
5-1803  
ASSEMBLY, Wheel & Tire (Snow Hog) (8245, 8265, & 9265 Models)  
(Includes Items 2A, 3A, & 4)  
-
5-1871  
ASSEMBLY, Wheel & Tire (Snow Hog) (10305E Models)  
(Includes Items 2B, 3B, & 4)  
-
-
5-8916* ASSEMBLY, Wheel & Tire (Kenda) (8245, 9265 & E9265 Models)  
(Includes Items 2C, 3C & 4)  
5-8918* ASSEMBLY, Wheel & Tire (Kenda) (11305 & E11305 Models)  
(Includes Items 2D, 3B & 4)  
2A  
2B  
2C  
2D  
2-3495  
2-3672  
7-3453  
7-3455  
TIRE, 16 x 4.80 x 8 (Snow Hog) (8245, 8265 & 9265 Models)  
TIRE, 16 x 6.50 x 8 (Snow Hog) (10305E Models)  
TIRE, 16 x 4.80 x 8 (Kenda) (8245, 9265 & E9265 Models)  
TIRE, 16 x 6.50 x 8 (Kenda) (11305 & E11305 Models)  
3A  
3B  
3C  
1-2162  
1-2163  
1-2162  
RIM, (8245, 8265 & 9265 Models)  
RIM, (10305E, 11305 & E11305 Models)  
RIM, (8245, 9265 & E9265 Models)  
*NOTE: These wheel assemblies are  
4
5
6
7
8
9
1-2234  
4-0464  
1-0935  
9-1502  
1-2407  
1-5067  
VALVE, Snap-In  
used on units built in 2000  
for model year 2001)  
HUB, Wheel (2)  
WASHER, 3/4 x 1-1/8" Thrust  
BOLT, 1/2-20 x 3/4" Hex Head Lug (Nyloc) Grade 5 (6)  
PIN, 5/16 x 1-11/16" Clevis (2)  
PIN, 3/32 x 1-1/2" Hair (2)  
LARGE FRAME SNOWTHROWER  
MANUAL No. 06037  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECALS  
1
2
3
4
5
7
ITEM  
PART NO. DESCRIPTION  
1
2
--  
--  
--  
3
4
5
6
7
2-9776  
7-2820  
7-2404  
3-6434  
2-9077  
2-8280  
2-6629  
1-6578  
2-7733  
2-4773  
DECAL, European Community (CE)  
DECAL, 2000 Year of Manufacture  
DECAL, 1999 Year of Mfr.(not shown)  
DECAL, 1997 Year of Mfr.(not shown)  
DECAL, 1996 Year of Mfr.(not shown)  
DECAL, Foot Danger/Blank  
DECAL, Foot Danger/Blank  
DECAL, Danger (Collector)  
DECAL, Ear Protection  
DECAL, Hand Danger  
6
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECALS  
(Continued)  
8
9
10  
11  
13  
12  
14  
ITEM  
PART NO. DESCRIPTION  
8
9
2-8281  
2-8711  
2-8700  
2-3009  
2-8744  
1-2639  
1-6573  
7-3342  
DECAL, Heavy Duty Snow  
DECAL, Foot Danger (Euro)  
DECAL, Chute/Read Manual (Euro)  
DECAL, Noise  
DECAL, Turn To Lock  
DECAL, Start  
DECAL, Traction Clutch  
DECAL, OPEI Snow  
10  
11  
12  
13  
14  
15  
15  
LARGE FRAME SNOWTHROWER  
MANUAL No.06037  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECALS  
(Continued)  
16  
17  
18  
19  
ITEM PART NO. DESCRIPTION  
16  
17  
18  
--  
--  
--  
--  
--  
--  
19  
2-8279  
7-3483  
7-3482  
2-8214  
2-8695  
4-5177  
4-5183  
2-8696  
4-5183  
7-3844  
DECAL, Control- 10/30  
DECAL, Control- 11/30  
DECAL, Control- E11/30  
DECAL, Control- 8/24 (not shown)  
DECAL, Ctrl.- E10/30 & N10/30(not shown)  
DECAL, Control- 9/26 (not shown)  
DECAL, Control- E9/26 (not shown)  
DECAL, Control- E8/26 (not shown)  
DECAL, Control- E9/26 (not shown)  
DECAL, Fuel Safety  
MANUAL No. 06037  
LARGE FRAME SNOW THROWER  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
HARDWARE BAG KIT #6-1368 (for Model 8245)  
PART NO. DESCRIPTION  
9-1070  
1-6314  
1-3849  
3-2910  
2-8223  
9-1067  
9-1071  
1-6304  
1-1938  
9-1075  
1-3865  
9-1298  
9-0041  
9-1082  
9-1550  
9-1149  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)  
WASHER, 5/16 x 1-1/4" Flat (2)  
SPACER  
LEVER, Clutch  
CABLE, Auger/Cable (2)  
NUT, 5/16-18 Hex Center Lock. Grade B  
NUT, 3/8-16 Hex, Grade B  
NUT, 3/8-16 x 1-3/4" Connector  
RETAINER, Chute  
SCREW, #10-24 x 5/8" Hex Washer Self-Tap (2)  
BOLT, 5/16-18 x 5/8" Shear (2)  
NUT, 5/16-18 Hex Nyloc (2)  
PIN, 1/8 x 1” Cotter  
PIN, 3/32 x 3/4” Cotter  
BOLT, 5/16-18 x 1-7/8" Shear (2)  
WASHER, 3/8 Flat  
HARDWARE BAG KIT #6-1366 (for Model 8265)  
PART NO. DESCRIPTION  
9-1070  
1-6314  
1-3849  
3-2910  
9-1149  
9-1067  
9-1071  
1-6304  
1-1938  
9-1075  
9-1298  
9-0001  
9-0187  
9-0196  
9-0041  
9-1082  
9-1550  
NUT, 5/16-18 Hex Flange Lock, Grade 5 (8)  
WASHER, 5/16 x 1-1/4" Flat (2)  
SPACER  
LEVER, Clutch  
WASHER, 3/8 Flat  
NUT, 5/16-18 Hex Center Lock, Grade B  
NUT, 3/8-16 Hex, Grade B  
NUT, 3/8-16 x 1-3/4" Connector  
RETAINER, Chute  
SCREW, #10-24 x 5/8" Hex Washer Self-Tap (2)  
NUT, 5/16-18 Hex Nyloc (2)  
BOLT, 5/16-18 x 3/4" Short Neck Carriage  
WASHER, 5/16 Split Lock  
NUT, 5/16-18 Hex  
PIN, 1/8 x 1” Cotter  
PIN, 3/32 x 3/4” Cotter (2)  
BOLT, 5/16-18 x 1-7/8" Shear (2)  
HARDWARE BAG KIT #6-1365  
(for Models: E8265, 9265, E9265, 10305, 10305E, E10305, E10305E, 11305 and E11305)  
PART NO. DESCRIPTION PART NO. DESCRIPTION  
9-1070  
NUT, 5/16-18 Hex Flange Lock,  
1-3865  
9-1298  
2-8223  
9-0001  
BOLT, 5/16-18 x 5/8" Shear (2)  
Grade 5 (4)  
NUT, 5/16-18 Hex Nyloc (2)  
CABLE, Auger/Clutch  
BOLT, 5/16-18 x 3/4" Short Neck  
Carriage (2)  
1-6314  
1-3849  
3-2910  
9-0037  
9-1067  
WASHER, 5/16 x 1-1/4" Flat (2)  
SPACER  
LEVER, Clutch  
PIN, 3/32 x 3/4" Cotter (2)  
NUT, 5/16-18 Hex Center Lock,  
Grade B  
NUT, 3/8-16 Hex, Grade B  
NUT, 3/8-16 x 1-3/4" Connector  
RETAINER, Chute  
SCREW, #10-24 x 5/8" Hex  
Washer Self-Tap (2)  
9-0187  
9-0196  
9-0041  
9-1082  
9-1550  
1-2080  
WASHER, 5/16 Split Lock (2)  
NUT, 5/16-18 Hex (2)  
PIN, 1/8 x 1” Cotter  
PIN, 3/32 x 3/4” Cotter  
BOLT, 5/16-18 x 1-7/8" Shear (2)  
TIE, Cable 7” (2)  
9-1071  
1-6304  
1-1938  
9-1075  
MANUAL No. 06037  
LARGE FRAME SNOWTHROWER  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES (continued)  
DRIFT CUTTER KIT #6-0472  
*9-0196 HEX NUT (2)  
3-7971 DRIFT CUTTER  
*9-0001 CARRIAGE  
BOLT (2)  
*9-0187 LOCK WASHER (2)  
*INCLUDED IN 6-0502 HARDWARE  
BAG (PART OF THIS KIT)  
TIRE CHAIN KITS FOR SNOW HOG TIRES  
MODELS  
8245, 8265  
TIRE SIZE  
16-4.80 x 8  
KIT NO.  
6-0900*  
9265 & E9265  
MODELS  
TIRE SIZE  
16-6.50 x 8  
KIT NO.  
6-0927*  
10305, 10305E  
E10305, E10305E  
11305 & E11305  
*Each Kit Includes  
Two (2) Chains  
LARGE FRAME SNOWTHROWER  
MANUAL No.06037  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES (Continued)  
ELECTRIC START KITS  
6-0759, KIT, 120 Volt Electric Start for Tecumseh HMSK 8 & 10 HP Engines  
(Tecumseh Kit No. 179-84C)  
For use on USA Models 8245, 9265 and 10305  
6-3109, KIT, 230 Volt Electric Start for Tecumseh HMSK 8, 9 & 10 HP Engines  
Includes 7-2610 Electric Starter Kit (Tecumseh No. 179-160) and  
7-2611, 8’ Extension Cord  
For use on Euro Models: E9265 & E10305  
LIGHT KIT  
6-1191, KIT, Light (for engines built with 18 watt internal alternator)  
For use on Models 8265, E8265, 9265, E9265, 10305, 10305E, E10305 and E10305E)  
SINGLE HANDLE CONTROL KIT  
6-0991, KIT, Single Handle Control Retro-Fit  
Fits Large Frame Snow Throwers After Models 8242, 8262 & 10302  
REMOTE DEFLECTOR CONTROL KIT  
6-1014, KIT, Remote Deflector Control  
ACCESSORY LUBRICATION  
Part No. 2-9577 GREASE, Benalene 900  
MANUAL No. 06037  
LARGE FRAME SNOWTHROWER  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Manual for  
TWO STAGE  
LARGE FRAME  
SNOW THROWER  
SERIES 5  
MODELS  
8245  
8265  
10305  
11305  
E8265 10305E  
9265 E10305  
E9265 E10305E  
E11305  
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE  
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD  
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH  
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.  
COPYRIGHT © 2000  
SNAPPER INC.  
ALL RIGHTS RESERVED  
MANUAL No. 06037  
(Rev. 5, 7/03/00)  
Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone COM 190 User Manual
Sony Computer Drive MSAC US30 User Manual
Sony MiniDisc Player 253 User Manual
Sony Modem USB 598 User Manual
Sony Video Game Console SCPH 70003 PS2 User Manual
Sterling Marine Instruments 6017 series User Manual
Summit Freezer FS 62 User Manual
Sunbeam Wok WW8900 User Manual
Sun Microsystems Network Card 802 1304 10 User Manual
Tanaka Trimmer THT 2000 User Manual