Cal. 5D88
INSTRUCTIONS
(P.
3)
BEDIENUNGSANLEITUNG
INSTRUCTIONS
ISTRUZIONI
(S. 24)
(P. 45)
(P. 66)
(P. 87)
(P. 108)
INSTRUCCIONES
INSTRUÇÕES
(129
)
Download from Www.Somanuals.com. All Manuals Search And Download.
You are now the proud owner of a SEIKO KINETIC® Cal. 5D88. For best results, please read
the instructions in this booklet carefully before using your SEIKO KINETIC®. Please keep this
manual handy for ready reference.
CONTENTS
Sie sind jetzt stolzer Besitzer einer SEIKO KINETIC® Kal. 5D88. Lesen Sie diese
Bedienungsanleitung vor der Verwendung Ihrer SEIKO KINETIC® aufmerksam durch, um die
optimale Nutzung dieser Uhr zu gewährleisten. Heben Sie diese Bedienungsanleitung gut auf,
um jederzeit wieder nachlesen zu können.
Page
FEATURES.....................................................................................................................................................
DISPLAY.AND.BUTTON.OPERATION...........................................................................................................
CROWN.WITH.DRIVING.WHEEL..................................................................................................................
HOW.TO.CHARGE.AND.START.THE.WATCH..............................................................................................
HOW.TO.READ.THE.DIRECT.DRIVE.INDICATOR........................................................................................
TIME/CALENDAR.SETTING..........................................................................................................................
HOW.TO.SET.THE.MOON.PHASE...............................................................................................................
IMPROPER.FUNCTION.................................................................................................................................
AUTOMATIC.HAND.ALIGNMENT.................................................................................................................
POWER.SOURCE.(RECHARGEABLE.BATTERY)..........................................................................................
NOTES.ON.OVERHAUL................................................................................................................................
SPECIFICATIONS..........................................................................................................................................
4
5
6
7
9
16
18
20
21
22
22
23
Vous voici l’heureux propriétaire d’une montre SEIKO KINETIC® Cal. 5D88. Pour en obtenir de
bonnes performances, veuillez lire attentivement les explications de ce mode d’emploi avant
d’utiliser votre montre SEIKO KINETIC®. Conservez ce mode d’emploi pour toute référence
ultérieure.
Grazie di aver acquistato questo orologio SEIKO KINETIC® Cal. 5D88. Per ottenerne i migliori
risultati leggere attentamente le istruzioni di questo libretto prima di passare all'uso dell'orologio
stesso. Tenere poi il manuale a portata di mano, per ogni eventuale futura, ulteriore consultazione.
Usted es ahora un orgulloso propietario de un Reloj SEIKO KINETIC® Cal. 5D88. Para los mejores
resultados, por favor lea las instruciones de este librito cuidadosamente antes de utilizar su Reloj
SEIKO KINETIC®. Le rogamos que guarde este conveniente manual para pronta referencia.
Você pode sentir-se orgulhoso de ter adquirido um SEIKO KINETIC® Cal. 5D88. Para obter dele os
resultados máximos, solicitamos-lhe que, antes de usar o seu SEIKO KINETIC®, leia atentamente as
instruções contidas neste opúsculo. E guarde este manual para referências futuras.
IFor the care of your watch, see "TO PRESERVE THE QUALITY OF YOUR
WATCH" in the attached Worldwide Guarantee and Instruction Booklet.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
ꢁ
FEATURES
DISPLAY AND BUTTON OPERATION
SEIKO KINETIC Cal. 5D88 is an analogue quartz watch equipped with the Kinetic
technology developed by SEIKO. It generates the electric energy to power the
watch, utilizing the movement of your body, and stores it in the rechargeable
battery, which requires no periodical replacement unlike conventional button-
type batteries. The watch is equipped with a direct drive indicator that constantly
displays how long the watch will keep operating. The direct drive indicator also
dynamically displays the electric power generation status while charging the
watch. In addition, the watch is equipped with a ꢀꢂ-hour hand, date hand, day
hand, and moon phase display.
Moon phase display
Button (moon phase
Minute hand
setting / resetting the
built-in IC)
Normal position: Electric power
generation by manual winding
15
20
0
1
Hour hand
2
5
5
First click position: Date
and day setting
2
9
Direct drive indicator
hand (for indicating
amount of power
reserved, power
generation status and
amount of generated
power)
CAUTION
CROWN
● The movement of your arm while the watch is worn generates electrical
energy to power the watch. Even if the watch is worn on your arm, it will
not be charged while your arm is not in motion.
Second click position:
Time setting
Second hand
● It is recommended that the watch be worn on your wrist daily for at least
10 hours.
Date hand
24-hour hand
Day hand
● If you do not wear the watch for more than the continuous operating time
that it displays, charge the watch as necessary so as not to stop operation
of the watch until the next time you wear it. Refer to “How to charge and
start the watch” for further details.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
5
CROWN WITH DRIVING WHEEL
HOW TO CHARGE AND START THE WATCH
u
Some models may have a crown with a special structure as illustrated
below. Refer to the following instructions when operating this type of
crown, as it should be operated in a different way from that of ordinary
ones.
1. Turn the crown clockwise repeatedly to charge
the watch.
✽
The manual winding mechanism for generating the
electric power functions when the crown is turned
clockwise. The watch can also be charged when the
crown is turned in a reciprocating motion.
Normal position
Second click position
First click position
✽
When the watch is completely stopped, the direct
drive indicator hand points at scale marking 1 under
the 0 position (standby position).
ꢀ. After electric power generation by turning the
crown continues for a certain period, the direct
drive indicator hand moves to point at scale
marking 0 and the second hand starts moving.
Make sure to stop turning the crown to check it.
Crown
✽
✽
If the second hand does not move even though the
crown is turned, turn the crown more quickly.
A
B
B
A
Driving wheel
If the watch has been left untouched for several years,
the second hand starts moving in 2-second intervals
after the crown is turned. This is not a malfunction.
Charge the watch by turning the crown until the direct
drive indicator hand moves from the standby position to
the 0 position. It may take approximately 5 to 6 minutes.
To pull out the crown, pull out the A portion
(crown).
To turn the crown, turn the B portion (driving
wheel).
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ
ꢄ
ꢁ. Continue to turn the crown to sufficiently charge the watch.
HOW TO READ THE DIRECT DRIVE INDICATOR
✽
The direct drive indicator hand moves up and down to display the electric power generation
status.
When you stop turning the crown, the indicator hand displays the amount of power gener-
ated by the current manual winding for approximately 4 seconds, and then the hand returns to
display the total amount of power reserve. Charge the watch until the indicator hand points at
the second marking above "0"(approximately 6 hours of power reserve).
The direct drive indicator can be used to check the following:
(1) Power reserve amount (continuous operating time)
(ꢀ) Real-time power generation status and newly generated amount of power
while charging the watch
✽
✽
✽
This watch will keep on operating for approximately 1 month (30 days) if it is fully charged.
However, it is not necessary to charge the watch fully, as it is charged automatically while it is
worn on your wrist.
“M+1” position
Refer to "How to read the direct drive indicator” for further details.
Power reserve/
generated power scale
Power reserve display
Generated power
amount display
Power generation
status display
Standby position
Scale marking
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ꢅ
POwER RESERvE INDICATOR
The watch checks power reserved in the rechargeable battery and displays
how long the watch will keep operating in 18 steps (0 - M scale marking).
SCALE TABLE Of POwER RESERvE AmOUNT AND GENERATED
■
●
■
POwER AmOUNT
Scale.
Standby.
position.
0
0
0
1
2
3
4
5
6
7
8
9
10
11
●
The continuous operating time until approximately one month (ꢁ0 days)
can be displayed.
marking.
Indication.on.
dial
D.
(Day)
✽
The power reserve indicator provides an approximate time that the watch keeps operating
without needing to be charged.
3.H
20.
6.H
40.
9.H
12.H 15.H 18.H 21.H 1.D
2.D
3.D
4.D
Power.
reserve.
amount
The.watch.
stops.
operating.
✽
✽
If the direct drive indicator hand moves to the 0 position, the watch will stop operating within
3 hours. When the watch stops, the indicator hand moves to the standby position to show
that the watch stops operating due to a power shortage.
Amount.of.
generated.
power
0
1.H. 1.H. 1.H. 2.H
2.H. 2.H. 3.H
20.
3.H. 3.H.
20. 40.
Min. Min.
If the crown is turned after the watch is fully charged, the indicator points at the “M+1” position.
Min. Min.
20.
40.
40.
Min. Min.
Min. Min.
REAL-TImE POwER INDICATOR
■
●
H : Hour
D : Day
W : Week
Scale.
12
13
14
15
16
17
M
18
marking.
While turning the crown to charge the watch, the watch checks a newly
generated amount of power and displays it in 1ꢅ steps (0 - “M+1” scale
marking).
Indication.on.
dial
W
(Week)
(Month)
*
The minimum amount
of power reserve and
g e n e r a t e d p o w e r i s
described in the table.
5.D
6.D
1.W
2.W 3.W 30.D
Power.
reserve.
amount
●
A maximum ꢃ hours of generated power can be displayed.
✽
The real-time power indicator provides an approximate amount of power generated through
current power generation.
Amount.of. 4.H
generated.
power
4.H. 4.H.
20. 40.
Min. Min.
5.H
5.H. 5.H.
20. 40.
Min. Min.
6.H
✽
After power generation by turning the crown is completed, the indicator hand will display the
amount of newly generated power for approximately 4 seconds, and then the indicator hand
will move to display the total amount of power reserve.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
HOw TO READ THE DIRECT DRIvE INDICATOR wHILE CHARGING
THE wATCH
■
Ex.) How to read the scale table of power reserve and generated power.
1. Turn the crown clockwise. After approximately 1 second, the direct drive
indicator hand starts moving.
Scale.marking.
3
Power.reserve
Scale.marking.
Generated.power
1.hour.or.more.
3.hour.or.more
6.hour.or.more
Not.shorter.than.9.hours.
and.not.longer.than.12.
hours
3
ꢀ. Continue to turn the crown. The indicator hand moves upward and
downward according to the power generation status. When further
continuing to turn the crown, the point where the indicator hand starts
moving goes up as the amount of generated power increases. If you
temporarily stop turning the crown, the indicator hand goes down to
display the accumulated power generated by the current power generation.
9
18
9
Not.shorter.than.2.days.
and.not.longer.than.3.days
17
30.days
ꢁ. Stop turning the crown. The direct drive indicator hand returns to display
the total amount of power reserve after approximately ꢂ seconds.
✽
After the crown is turned repeatedly, the indicator hand will stop at the maximum scale value
“M+1” position).
(
If the crown is turned after the indicator hand stops at the “M+1” position, the watch continues to accumulate
power reserve, but stops displaying the power generation status. If you want to display the power generation
status, stop turning the crown, and after the indicator hand returns to display the power reserve, start turning the
crown again.
✽
✽
✽
If turning the crown more quickly and in long strokes so that the indicator hand makes large
movement, the generated power increases efficiently.
Depending on intervals between turning the crown, the indicator hand may not move. This is
not a malfunction.
The watch is equipped with a system to prevent overcharge. Even if the crown is turned
when the indicator hand points at the maximum scale value of power reserve, no malfunction
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢀ
1ꢁ
<Display and movement flow of the direct drive indicator hand while charging
the watch>
will result.
✽
✽
The watch can be charged if it is swung from side to side, however, it may take time until it
displays the power generation status.
Even if the watch is worn on the wrist after it is charged fully (power reserve of 30 days),
and then it is left untouched, the watch will not operate for more than 30 days after it is worn
again.
When you take off the watch and leave it untouched, look at the indicator to check if the
watch continues to operate until you wear the watch the next time, and turn the crown to
charge the watch as necessary (make sure to store extra power so as not to stop operation of
the watch).
Power generation status and generated power display
In-progress
Power
reserve
display
Initial status
After.
A..While.turning.the. B..When.temporarily.
approximately.
1.second.
since.starting.
to.turn.the.
crown.
A
B
crown
stopping.turning.the.
crown
✽
✽
The power reserve indicator hand
points at a scale marking between 0
and ”M+1” according to power gen-
eration status.
Power reserve
display
After.
approximately.
4.seconds.
since.stopping..
turning.the.
crown
✽
The point where the indicator
hand starts moving goes up as
generated power increases.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢂ
15
TIME/CALENDAR SETTING
HOw TO SET THE DATE AND DAy
■
1. Pull out the crown to first click.
ꢀ. Turn the crown counterclockwise
to set the date hand to point at the
correct date.
1. Pull out the crown to second click
15
when the second hand is at the 1ꢀ
o’clock position.
15
ꢁ. Turn the crown clockwise to set the
day hand to point at the correct day
of the week.
ꢀ. Turn the crown to set the time.
✽
When setting the hour hand, check that
AM/PM is correctly set. The watch is de-
signed so that the calendar changes once
✽
Do not set the date and day of the week
between 9:00 p.m. and 4:00 a.m. Other
wise, it may not change properly.
in 24 hours.
Turn the hand past the 12 o'clock marker to
determine whether the watch is set for the A.M.
or P.M. period. If the calendar changes, the
time is set for the A.M. period. If the calendar
does not change, the time is set for the P.M.
period.
✽
It is necessary to adjust the date and day
of the week on the first day after a 30-day
month and February.
✽
When setting the minute hand, advance it 4
to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
ꢂ. Push the crown back in to the
normal position.
ꢁ. Push the crown back in to the
normal position in accordance with
a time signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢃ
1ꢄ
HOW TO SET THE MOON PHASE
The moon phase represents the period from the time when the last new
moon occurred to noon of the current day in day increments.
Moon phase 0
(new moon)
Moon phase 15
(full moon)
Moon phase 22
Moon phase 7
●
15
15
15
15
●
The period between new moons is called a “synodic month,” and its
average length is approximately ꢀꢅ.5 days.
1. Press the button using an object
Button
with a long tapered tip such as a
ballpoint pen.
15
When the button is pressed, the
moon phase advances by one
phase.
✽
✽
Round off the number of moon phases to
the nearest whole number. (Example; 7.8 ➔
8, 24.2 ➔24 )
Refer to the weather report of your lo-
cal newspaper for current moon phase
information.
✽
Do not set the moon phase between
9 p.m. and 1 a.m., as the moon phase may
not change to the correct display on the fol-
lowing day.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
1ꢅ
IMPROPER FUNCTION
When the watch stops operating even though it displays the remainder of the
power reserve, follow the instructions below to reset the built-in IC.
✽
✽
If the indicator hand points at under the 0 position, sufficiently charge the watch.
Refer to“How to charge and start the watch”.
By conducting this operation, the indicator hand moves to the 0 position even
though it displayed that there was remaining power reserve; however, this is not a
malfunction.
HOw TO RESET THE BUILT-IN IC
■
✽
If the watch does not resume normal operation even after resetting the built-in IC,
consult the retailer from whom the watch was purchased.
15
ꢂ. Turn the crown to charge the watch at least until the indicator hand points
at the second marking above "0"(approximately ꢃ hours of power reserve).
And then set the time, date, day of the week, and moon phase.
AUTOMATIC HAND ALIGNMENT
The position of the indicator hand may move out of alignment in rare cases. The
watch automatically corrects the position of the indicator hand once every ꢀꢂ
hours. While correcting the hand position, the indicator hand moves abnormally,
however, this is not a malfunction. After automatic hand alignment is performed,
the indicator hand will return to display power reserve amount.
1. Pull out the crown to the second click.
ꢀ. Press the button for ꢀ seconds or more using a sharp-pointed tool (e.g. ball
point pen).
<About the movement of the indicator hand during automatic hand alignment>
When automatic hand alignment starts, the indicator hand moves to the area under
the 0 position and vibrates, and then points at the 0 position. After automatic
hand alignment is completed, the indicator hand returns to display power reserve
amount.
ꢁ. Push the crown back into the normal position.
✽
The indicator hand will point at the 0 position, and the watch resumes its normal
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0
ꢀ1
POWER SOURCE (RECHARGEABLE BATTERY)
This watch requires no periodic battery replacement as it is powered by the
exclusive rechargeable battery, which is completely different from conventional
batteries for watches.
SPECIFICATIONS
1. Frequency.of.crystal.oscillator.............................. 32,768.Hz.(Hz.=.Hertz.….Cycles.per.second)
2. Loss/gain.(monthly.rate)....................................... Less.than.15.seconds.(worn.on.the.wrist.at.normal.
temperature.range.between.5°.C.and.35°.C)
3. Operational.temperature.range............................. –10°.C.~.+60°.C.
4. Driving.system...................................................... Step.motor:.2.pieces
This exclusive rechargeable battery is an environmentally friendly, clean energy
storage device.
5. Display.system..................................................... 24-hour,.hour,.minute,.second,.date,.day.of.the.
week,.and.moon.phase.
CAUTION
Power.reserve.display,.power.generation.status.
display,.and.generated.power.amount.display.
6. Rechargeable.battery............................................ Button.type,.1.piece
7. Duration.of.charge................................................ Approximately.1.month.(if.the.watch.is.fully.
charged)
Never install a silver oxide battery for conventional watches in place of the
rechargeable battery, which can generate heat that can cause bursting or
ignition.
8. Additional.functions.............................................. Overcharge.prevention.function
9. IC.(Integrated.Circuit)............................................ C-MOS-IC,.1.piece.
10. Generating.system............................................... Miniature.AC.generator
NOTES ON OVERHAUL
The watch is a precision device. If the parts run short of oil or get worn out, the
watch may stop its operation or lose time. We recommend you have the watch
overhauled periodically to keep it running accurately.
*
The specifications are subject to change without prior notice for product improvements.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ
ꢀꢁ
|