COLOUR
TELEVISION
CS29A11SS/CS29A11SP/CS34A11SS
CS34A11SP/WS32A11SS/WS32A11SP
CS29M20SS/CS29M20SP/CS29Z4SS
CS29Z4SP/CS29A6SP/CS29A7SP
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
(OPTION)
PICTURE IN PICTURE
(OPTION)
TELETEXT
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
View of Your Television (depending on the model).......................................
Infrared Remote Control................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode.....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
7
9
10
11
11
12
13
14
14
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
15
16
17
19
20
21
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception....................................................................
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) feature (depending on the model)......
22
23
24
25
26
26
27
27
28
28
29
30
31
32
33
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings........................................................................
Selecting the Color Tone...............................................................................
Selecting the Picture Size (depending on the model)...................................
Selecting the Digital NR.................................................................................
Using the Tilt Control Feature........................................................................
Setting the Blue Screen.................................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings (depending on the model) ..............................................
Selecting the Sound Mode (depending on the model) ..................................
Selecting the Melody .....................................................................................
Setting and Displaying the Current Time.......................................................
English-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents(continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
Setting the Sleep Timer.................................................................................
Switching the Television On and Off Automatically.......................................
Setting the Preferred Volume Level/Channel ................................................
Viewing an External Signal Source/Edit Name (depending on the model)....
Viewing the Picture In Picture (PIP) (depending on the model) ....................
34
35
36
37
38
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature (depending on the model) ..................................................
41
41
42
43
43
Displaying the Teletext Information (depending on the model) .....................
Selecting a Page by Number (depending on the model)...............................
Using FLOF to Select a Page (depending on the model)..............................
Storing Teletext Pages (depending on the model) ........................................
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the DVD Player (depending on the model).............................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Viewing Pictures From External Sources ......................................................
44
45
45
46
46
47
◆ RECOMMENDATIONS FOR USE
■
Automatic Degaussing to Remove Color Patches.........................................
48
48
■
Troubleshooting: Before Contacting Service Personnel................................
Symbols
☛
➢
Press
Important
Note
English-4
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television (depending on the model)
The actual configuration on your TV may be different, depending on
your model.
➢
Control Panels
7
6
1
5
4
1
6
5
4
3
2
7
6
5
4
2
3
3
2
1
1
3
2
6
5
4
1) Power On/Off
5) Volume Adjustment
6) Menu Display
2) Standby Indicator
3) Remote Control Sensor
4) Channel Selection
7) Input source selection
Using the Buttons on the Panel
➢
If the remote control no longer works or you have lost it, you can use controls on the panel of
the TV to:
◆
◆
◆
◆
Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲).
Access the menu ( MENU ).
Adjust the volume ( - VOL
+
).
Switch among Video input modes ( TV/VIDEO ).
English-5
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television (depending on the model) (continued)
Connection Panels
Side of the TV (RCA Model)
Side of the TV (SCART Model)
Audio Input (R, L)
Audio Input (R, L)
Video Input
Video Input
S-Video Input
S-Video Input
Rear of the TV (depending on the model)
Œ
MONITOR OUT (VIDEO / L-AUDIO-R)
¨ VHF/UHF (75Ω)
Outputs for external devices.
75Ω Coaxial connector for Aerial/
Cable Network.
´ AV 1 (VCR) -VIDEO/AUDIO(L/R)
AV 2 (VCR) -VIDEO/AUDIO(L/R)
AV 3 (VCR) -VIDEO/AUDIO(L/R)
Inputs or outputs for external devices, such
as VCR,DVD, video game device or video
disc players.
ˆ
Ø
/
(SCART)
1
2
Inputs or outputs for external devices, such
as VCR, DVD, video game device or video
disc players.
MONITOR AUDIO OUT
Audio Output for external devices.
ˇ COMPONENT (DVD)
VIDEO (Y/Pb/Pr) and AUDIO (L/R) inputs for
Component.
Available format for Component inputs; 480i,
576i.
➢
English-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control
TELEVISION STAND-BY
PICTURE SIZE
SOUND MODE SELECTION
AUTOMATIC SWITCH-OFF
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
VOLUME INCREASE
EXTERNAL INPUT SELECTION
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
PREVIOUS CHANNEL
INFORMATION DISPLAY
EXIT FROM ANY DISPLAY
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe ON/OFF/DEMO
(depending on the model)
The performance of the remote control may be affected by bright light.
➢
English-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control (continued)
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT SIZE SELECTION
TELETEXT SUB-PAGE
TELETEXT STORE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PIP ON/OFF
P
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
FASTEXT TOPIC SELECTION
P
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
SUB PICTURE(PIP)
SOURCE SELECTION
W.LINK FUNCTIONS
(depending on the model)
English-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
2
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
◆
-
+
on the battery against
on the battery against
-
on the remote control
+ on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
English-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
Rear of the TV
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
or
For further details, refer to:
Cable Television
Network
◆
“Storing Channels Automatically ” on page 15
“Storing Channels Manually” on page 17
◆
English-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
2
3
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
➢
Press the “ ” button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
Press the POWER ( ) button on the remote control to switch the
television on.
Result:
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 17.
➢
4
To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
)
You can also switch on by pressing the P
or
button.
➢
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
☛
example). Turn your television off by pressing the “
”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous
stored channel.
-
to
Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
PRE-CH
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
-
Used to decrease the
volume.
MUTE
MENU
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
➢
press the
or
button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
-
Used to confirm your choice.
EXIT
TV
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
English-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
1
If the television is in Standby mode, press the POWER ( ) button
TV
Setup
on the remote control.
Plug & Play
√
√
√
Language
Time
œ
English
Result:
The message Plug & Playis displayed. It flickers for
a little while and then Languagemenu is automatically
displayed.
Blue Screen
Melody
: Off
: On
Demonstration
√
2
Select the appropriate language by pressing the œ or √ button.
(
)
Press the MENU
button to enter the language.
œ √ Adjust
Skip
Result: The message Check antenna input. is displayed.
If any language is not selected on the Languagemenu, the
Languagemenu will disappear about 30 seconds later.
➢
Check antenna input.
3
4
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
œ √ Move
Skip
Result:
The Auto Storemenu is displayed with Areais
selected.
TV
Auto Store
ASIA W/EUROPE
√
Area
Search
œ
Select your Area by pressing the œ or √ button. To search the
: -/+
channels, select Searchby pressing the ▼ or ▲ button, and then
(
)
press the œ or √ button. Press the MENU
search.
button to stop the
Result:
The Timemenu is displayed with Clockis selected.
Refer to “Storing Channels Automatically” on page 15.
Move
œ √ Adjust
Skip
➢
5
6
7
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
TV
Time
-- : -- am
: Off
-- : -- am Off
-- : -- am Off
Clock
Sleep Timer
On Timer
Refer to “Setting and Displaying the Current Time” on page
33.
➢
Off Timer
(
)
When you have finished, press the MENU
button.
On Timer Volume
On Timer Channel
: 10
: P 1
Result:
The message Enjoy your watching.is displayed,
and then the channel which has been stored will be
activated.
Move
œ √ Adjust
Skip
If you want to reset this feature...
Enjoy your watching.
(
)
1
2
Press the MENU
button.
Press the ▼ or ▲ button to select Setup, and then press the
ENTER ( ) button.
TV
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
√
Result:
The Plug & Playis selected.
√
3
Press the ENTER ( ) button again.
Result: This feature starts with the message Plug & Play
: Off
: On
Demonstration
√
is displayed.
Move
Enter
Return
English-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
displayed.
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Demonstration.
Press the ENTER ( ) button.
TV
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
√
√
Result:
Each of the menu options is displayed in turn.
: Off
: On
When you wish to exit from the demonstration, press the
➢
Demonstration
√
EXIT (
) button on the remote control.
Move
Enter
Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
TV
Setup
Plug & Play
√
√
√
Language
Time
œ
English
(
)
1
2
Press the MENU
button.
Blue Screen
Melody
Demonstration
: Off
: On
Result: The main menu is displayed.
√
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
Move
œ √ Adjust
Return
displayed.
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Language.
Select the appropriate language by pressing the œ or √ button
repeatedly.
6
When you have finished, press the EXIT (
) button to exit.
English-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your area). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
Name
(
)
1
2
Press the MENU
button.
†
More
Result: The main menu is displayed.
Move
Enter
Return
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Auto Store
displayed.
Area
œ
ASIA W/EUROPE
√
Search
: -/+
3
4
Press the ENTER ( ) button.
Result:
The Auto Storeis selected.
Press the ENTER ( ) button again.
Result:
The options available in the Auto Storegroup are
displayed with Areais selected.
Move
œ √ Adjust
Return
5
Select your area by pressing the œ or √ button. The areas are
displayed in the following order: ASIA W/EUROPE CIS
E/EUROPE CHINA HONGKONG U/K AUSTRALIA
NZ/INDONESIA SOUTH AFRICA AMERICA
Auto Store
-
-
-
-
-
Area
Search
: ASIA W/EUROPE
-/+
œ
√
-
-
6
7
Press the ▼ or ▲ button to select Search.
Press the œ or √ button to start the search.
Move
œ √ Search
Return
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
(
)
button.
8
When searching and storing are complete, the Sortmenu is
displayed.
P 1
106 MHz
7 %
◆
To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 16.
Return
◆
To exit from the channel store function without sorting the
TV
Sort
(
)
channels, press the MENU
button repeatedly until the
From
To
Store
œ
P 1
√
menus disappear.
: P--
: ?
9
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 16)
Skip Unwanted Channels (refer to page 19)
Assign a name to the stored channels (refer to page 20)
Fine tune channel reception if necessary (refer to page 21)
Activate the Digital Noise Reduction feature (refer to page 26)
Move
œ √ Adjust
Return
English-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
TV
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
(
)
1
2
Press the MENU
button.
Name
Result: The main menu is displayed.
†
More
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Move
Enter
Return
displayed.
Sort
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Sort.
Press the ENTER ( ) button.
From
To
Store
œ
P 1
√
: P--
: ?
Result:
The options available in the Sortgroup are displayed
with Fromis selected.
Move
œ √ Adjust
Return
6
7
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Sort
Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
From
To
Store
: P 1
P 2
: ?
œ
√
You can also select the channel number directly by pressing
the numeric buttons (0~9).
➢
8
9
Press the ▼ or ▲ button to select Store. Select OK to confirm the
Move
œ √ Adjust
Return
Sort
√
exchange of channel numbers by pressing the œ or √ button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
From
To
Store
: P 1
: P 2
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the Fromby pressing the ▼ or ▲
button.
œ
OK
10 When you have finished, press the EXIT (
) button to exit.
Move
œ √ Adjust
Return
English-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store up to 100 television channels, including those
received via cable networks.
TV
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
Name
you wish to identify
†
More
Move
Enter
Return
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Manual Store
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Programme
Color System
Sound System
Search
Channel
Store
œ
P 1
√
: AUTO
: BG
: 0MHz
: C--
: ?
displayed.
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Manual Store.
Press the ENTER ( ) button.
Move
œ √ Adjust
Return
Manual Store
: P 1
Result:
The options available in the Manual Storegroup are
displayed with Programmeis selected.
Programme
Color System
Sound System
Search
Channel
Store
œ
AUTO
√
6
7
To assign a programme number to a channel, press the œ or √
button.
: BG
: 0MHz
: C--
: ?
Press the ▼ or ▲ button to select Color System. Indicate the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Move
œ √ Adjust
Return
Result:
The color standards are displayed in the following
order:
Manual Store
AUTO
-
PAL
-
SECAM
-
NT4.43
-
NT3.58.
Programme
Color System
Sound System
Search
Channel
Store
: P 1
: AUTO
BG
8
Press the ▼ or ▲ button to select Sound System. Select the
sound standard required by pressing the œ or √ button repeatedly.
œ
√
: 0MHz
: C--
: ?
Result:
The sound standards are displayed in the following
order:
BG
-
DK
-
I
-
M.
Move
œ √ Adjust
Return
English-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
TV
TV
TV
Manual Store
Programme
Color System
Sound System
Search
Channel
Store
: P 1
: AUTO
: BG
◆
◆
◆
Press the ▼ or ▲ button to select Channel.
Press the √ button.
: 0MHz
Press the ▼ or ▲ button to select C(Air channel) or S(Cable
channel).
œ
C 1
: ?
√
◆
◆
Press the √ button.
Adjust
œ √ Move
Return
Press the ▼ or ▲ button to select indicate the required
number.
Manual Store
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢
Programme
: P 1
: AUTO
: BG
Color System
Sound System
Search
Channel
Store
If no sound or abnormal sound, re-select the sound system
required.
➢
œ
46MHz√
: C 1
: ?
10 If you do not know the channel numbers, select Searchby
pressing the ▼ or ▲ button. Press the œ or √ button to start the
search.
Move
œ √ Search
Return
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Manual Store
Programme
Color System
Sound System
Search
: P 1
: AUTO
: BG
: 46MHz
: C 1
11 To store the channel and associated programme number, select
Storeby pressing the ▼ or ▲ button. Press the œ or √ button to
select OK.
Channel
Store
œ
OK
√
12 Repeat Steps 9 to 11 for each channel to be stored.
Move
œ √ Adjust
Return
13 When you have finished, press the EXIT (
) button to exit.
Channel mode
☛
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Unwanted Channels
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
All of the channels that you do not specifically choose to skip are
displayed during scanning.
Name
†
More
(
)
1
2
Press the MENU
button.
Move
Enter
Return
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Add/Delete
P 1
P 2
P 3
P 4
œ
Added
√
displayed.
: Added
: Added
: Added
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Add/Delete.
Press the ENTER ( ) button.
Move
œ √ Adjust
Return
Result:
The stored channels are displayed.
6
Press the ▼ or ▲ button to select the channel to add or erase.
If necessary, select Addedor Deletedby pressing the œ or √
button.
Add/Delete
P 1
P 2
P 3
P 4
œ
Deleted
√
: Added
: Added
: Added
7
8
Repeat Step 6 for each channel to be added or erased.
When you have finished, press the EXIT (
) button to exit.
Move
œ √ Adjust
Return
English-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
(
)
1
2
Press the MENU
button.
Name
Result: The main menu is displayed.
†
More
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Move
Enter
Return
displayed.
Name
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Name.
Press the ENTER ( ) button.
P 1
P 2
P 3
P 4
œ
-----
√
: -----
: -----
: -----
Result:
The current channels are displayed.
Move
œ √ Adjust
Return
6
If necessary, select the channel to be assigned to a new name by
pressing the ▼ or ▲ button.
7
8
Press the ENTER ( ) button.
Name
P 1
P 2
P 3
P 4
œ
A----
√
Press the ▼ or ▲ button to select a letter (A~Z), a number (0~9) or
: -----
: -----
: -----
a symbol (-, space). Move on the previous or next letter by
pressing the œ or √ button.
9
Repeat Steps
name.
6
to
8
for each channel to be assigned to a new
Adjust
œ √ Move
Return
10 When you have finished, press the EXIT (
) button to exit.
English-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
TV
Channel
…
More
Fine Tune
LNA
√
: Off
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
Move
Enter
Return
displayed.
3
4
5
6
Press the ENTER ( ) button.
Fine Tune
Reset
P 1
1
Press the ▼ or ▲ button to select Fine Tune.
Press the ENTER ( ) button.
Move
œ √ Adjust
Save
Return
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
7
8
9
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result:
Channel indicator turns into Red.
To erase adjusted picture or sound, select Reset by pressing the
▼ or ▲ button. Press the ENTER ( ) button.
Result:
Channel indicator returns to its original color.
) button to exit.
When you have finished, press the EXIT (
English-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
TV
Channel
…
More
and that is memorized on current channel, additional.
Fine Tune
LNA
√
œ
On
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▼ or ▲ button to select Channel.
Result: The options available in the Channelgroup are
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select LNA.
To activate this feature, select On by pressing the œ or √ button.
When you have finished, press the EXIT (
) button to exit.
Setting the LNA option to “On” may produce worse picture
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
➢
English-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
TV
Picture
Mode
Custom
œ
Dynamic
√
√
(
)
1
2
Press the MENU
button.
Color Tone
Size
Digital NR
: Normal
: Normal
: On
Result: The main menu is displayed.
†
More
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
Move
œ √ Adjust
Return
displayed.
3
4
Press the ENTER ( ) button.
Result: The Modeis selected.
Select the required picture effect by pressing the œ or √ button
repeatedly.
Result:
The following picture effects are available:
Dynamic
-
Standard
-
Movie
-
Custom.
5
When you have finished, press the EXIT (
) button to exit.
You can also set these options simply by pressing the
➢
P.MODE
(
)
(Picture Mode) button.
English-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality.
TV
Picture
: Dynamic
Mode
Custom
Color Tone
Size
√
(
)
1
2
Press the MENU
button.
: Normal
: Normal
: On
Result: The main menu is displayed.
Digital NR
†
More
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
Move
Enter
Return
displayed.
3
4
5
Press the ENTER ( ) button.
TV
Custom
Press the ▼ or ▲ button to select Custom.
Press the ENTER ( ) button.
Contrast
œ
:
:
:
90
50
60
50
√
Brightness
Sharpness
Color
Result:
The options available in the Customgroup are
displayed.
6
7
Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Coloror Tint-NTSC only) to be adjusted.
Press the œ or √ button.
Move
œ √ Adjust
Return
90
Contrast
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √
button.
When you have finished, press the EXIT (
) button to exit.
◆ If you make any changes to these settings, the picture
➢
standard is automatically switched to Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Color
Patches” on page 48.)
English-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Color Tone
(
)
1
2
Press the MENU
button.
TV
Picture
: Dynamic
Result: The main menu is displayed.
Mode
Custom
Color Tone
Size
Digital NR
√
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
œ
Normal
√
: Normal
: On
displayed.
†
More
3
4
5
Press the ENTER ( ) button.
Move
œ √ Adjust
Return
Press the ▼ or ▲ button to select Color Tone.
Press the œ or √ button.
Color Tone
Normal
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √
button. ( Warm1 ~ Warm10 - Normal - Cool1 ~
Cool10).
6
When you have finished, press the EXIT (
) button to exit.
English-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE
Depending on the model, the following picture sizes are available:
(
)” button.
TV
Picture
: Dynamic
Mode
Custom
Color Tone
Size
√
◆ Normal, Zoom1, Zoom2, 16:9
◆ 16:9, Panorama, Zoom1, Zoom2, 4:3
: Normal
Normal
: On
œ
√
Digital NR
†
More
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Size.
Press the œ or √ button to select the picture size.
When you have finished, press the EXIT (
) button to exit.
Selecting the Digital NR
If the signal received by your television is weak, you can activate
this feature to reduce any static and ghosting that may appear on
the screen.
TV
Picture
: Dynamic
Mode
Custom
Color Tone
Size
√
(
)
1
2
Press the MENU
button.
: Normal
: Normal
Result: The main menu is displayed.
Digital NR
œ
On
√
†
More
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
Move
œ √ Adjust
Return
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Digital NR.
To activate this feature, select On by pressing the œ or √ button.
When you have finished, press the EXIT (
) button to exit.
English-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
TV
Picture
…
More
Tilt
PIP
œ
3
√
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
Move
œ √ Adjust
Return
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Tilt.
Press the œ or √ button to reach the required setting (-7 to +7).
When you have finished, press the EXIT (
) button to exit.
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
TV
Setup
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
Plug & Play
Language : English
Time
√
√
Blue Screen
Melody
œ
On
: On
√
(
)
1
2
Press the MENU
button.
Demonstration
√
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Blue Screen.
To activate this feature, select On by pressing the œ or √ button.
When you have finished, press the EXIT (
) button to exit.
English-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ” button.
(
)
To return to normal viewing, press this button again.
➢
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
TV
Sound
Mode
Equalizer
œ
Custom
√
√
(
)
1
2
Press the MENU
button.
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
: Off
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Sound.
Result: The options available in the Soundgroup are
Move
œ √ Adjust
Return
displayed.
3
4
Press the ENTER ( ) button.
Result: The Modeis selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
The following sound effects are available:
Standard Music Movie Speech(SVE)
SVE : SAMSUNG Voice Enhancement Technic
-
-
-
-
Custom.
◆
5
When you have finished, press the EXIT (
) button to exit.
You can also set these options simply by pressing the
➢
S.MODE
(
)
(Sound Mode) button.
English-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
: Custom
(
)
1
2
Press the MENU
button.
Mode
Equalizer
√
Result: The main menu is displayed.
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
: Off
Press the ▼ or ▲ button to select Sound.
Result: The options available in the Sound. group are
displayed.
Move
Enter
Return
3
4
5
Press the ENTER ( ) button.
TV
Equalizer
Press the ▼ or ▲ button to select Equalizer.
Press the ENTER ( ) button.
R
L
Result:
The options available in the Equalizergroup are
displayed.
100 300 1K
3K 10K
You can also display this group simply by pressing the
S.MENU (Sound Menu) button.
➢
Adjust
œ √ Move
Return
6
7
Select the option to be adjusted by pressing the œ or √ button.
Press the ▼ or ▲ button to reach the required setting.
When you have finished, press the EXIT (
) button to exit.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
➢
English-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Sound Settings (depending on the model)
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
TV
TV
TV
TV
Sound
: Custom
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Mode
Equalizer
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
√
œ
On
√
: Off
: Off
: Off
Move
œ √ Adjust
Return
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects).
Sound
You can enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
Mode
Equalizer
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Custom
√
: Off
On
œ
√
◆ Pseudo Stereo / Dolby Virtual
: Off
: Off
Pseudo stereofeature converts a monaural sound signal
into two identical left and right channels.
Move
œ √ Adjust
Return
Once the Pseudo Stereoor Dolby Virtual is set to On
or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech(SVE).
Sound
Mode
Equalizer
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Custom
√
: Off
: Off
(
)
1
2
Press the MENU
button.
œ
On
: Off
√
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Sound.
Result: The options available in the Soundgroup are
Move
œ √ Adjust
Return
Sound
displayed.
3
4
Press the ENTER ( ) button.
Mode
Equalizer
Auto Volume
Dolby Virtual
Turbo Sound
Pseudo Stereo
: Custom
√
Select the required option (Auto Volume, Dolby Virtual
Turbo Sound or Pseudo Stereo) by pressing the ▼ or ▲
button.
,
: Off
: Off
: Off
œ
On
√
You can select the turbo sound feature simply by pressing
the TURBO button.
➢
Move
œ √ Adjust
Return
5
6
To activate each feature, select On by pressing the œ or √ button.
When you have finished, press the EXIT (
) button to exit.
Manufactured under license from
Dolby Laboratories.
➢
“Dolby” and the double-D symbol
are trademarks of Dolby
Laboratories.
English-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “STEREO”, depending on
the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO
NICAM
↔
MONO
(Normal)
NICAM
Stereo
STEREO ↔ MONO
NICAM (Normal)
NICAM Stereo
DUAL-
I
→ DUAL-II → Mono
NICAM
NICAM (Normal)
NICAM Dual-I/II
Regular broadcast
(Standard audio)
MONO (Normal use)
A2
Stereo
Bilingual or Dual-I/II
DUAL- ↔ DUAL-II
I
STEREO ↔ MONO
(Forced mono)
Stereo
◆ If the receiving conditions deteriorate, listening will be
➢
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Melody
You can hear clear melody sound when the television is powered on
or off.
TV
Setup
Plug & Play
Language : English
Time
√
(
)
1
Press the MENU
button.
√
Result: The main menu is displayed.
Blue Screen
Melody
Demonstration
: Off
On
œ
√
√
2
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
Move
œ √ Adjust
Return
displayed.
3
4
5
6
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Melody.
To activate this feature, select On by pressing the œ or √ button.
When you have finished, press the EXIT (
) button to exit.
English-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO
you wish to use the automatic on or off timers.
(
)” button. You must also set the time if
TV
TV
TV
Setup
Plug & Play
Language : English
Time
Blue Screen
Melody
√
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
➢
√
: Off
: On
Demonstration
√
(
)
1
2
Press the MENU
button.
Move
Enter
Return
Time
Result: The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
-- : -- am
displayed.
: Off
-- : -- am Off
-- : -- am Off
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Time.
Press the ENTER ( ) button.
: 10
: P 1
Move
œ √ Adjust
Return
Result:
The Clockis selected.
6
Press the ¦¤or button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
Time
Clock
01 : 00 am
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
: Off
-- : -- am Off
-- : -- am Off
7
8
When you have finished, press the EXIT (
) button to exit.
Press the INFO ( ) button to display the channel information and
the current time.
: 10
: P 1
Adjust
œ √ Move
Return
English-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset
interval.
TV
Setup
Plug & Play
Language : English
Time
√
(
)
1
2
Press the MENU
button.
√
Result: The main menu is displayed.
Blue Screen
Melody
Demonstration
: Off
: On
√
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
Move
Enter
Return
Time
displayed.
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Time.
Press the ENTER ( ) button.
TV
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
01 : 00 am
30
-- : -- am Off
-- : -- am Off
œ
√
Result:
The Clockis selected.
: 10
: P 1
6
7
Press the ▼ or ▲ button to select Sleep Timer.
Move
œ √ Adjust
Return
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the ¦¤or button.
8
When you have finished, press the EXIT (
) button to exit.
You can select a time period of between 30 and 180 minutes
after the television automatically switches to Standby mode
by pressing the SLEEP ( ) button.
➢
English-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
TV
TV
TV
Setup
choice at the time you select
Plug & Play
Language : English
Time
Blue Screen
Melody
√
◆ Switch off automatically at the time you select
√
: Off
: On
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
33). If you have not yet set the clock, the message Set
the clock firstis displayed.
➢
Demonstration
√
Move
Enter
Return
(
)
1
2
Press the MENU
button.
Time
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
01 : 00 am
Result: The main menu is displayed.
: Off
06 : 30 am On
-- : -- am Off
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
: 10
: P 1
displayed.
Adjust
œ √ Move
Return
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Time.
Press the ENTER ( ) button.
Time
Clock
01 : 00 am
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
: Off
06 : 30 am On
11 : 30 pm On
Result:
The Clockis selected.
6
Press the ▼ or ▲ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
: 10
: P 1
◆
Press the ¦¤or button to move to the hour or minute.
Adjust
œ √ Move
Return
Set these by pressing the ▼ or ▲ button.
◆
Press the ¦¤or button to move Offand then, press the
▼ or ▲ button to select On.
7
8
Press the ▼ or ▲ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
When you have finished, press the EXIT (
) button to exit.
Absent Power Off
➢
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
English-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Preferred Volume Level/Channel
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
TV
Setup
Plug & Play
√
Language : English
Time
Blue Screen
Melody
(
)
1
2
Press the MENU
button.
√
Result: The main menu is displayed.
: Off
: On
Demonstration
√
Press the ▼ or ▲ button to select Setup.
Result: The options available in the Setupgroup are
Move
Enter
Return
displayed.
3
4
5
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select Time
Press the ENTER ( ) button.
TV
Time
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel
01 : 00 am
: Off
06 : 30 am On
11 : 30 pm On
Result:
The Clockis selected.
œ
10
: P 1
√
6
7
8
9
Press the ▼ or ▲ button to select On Timer Volume.
Press the ¦¤or button to adjust volume level.
Press the ▼ or ▲ button to select On Timer Channel.
Press the ¦¤or button to selsct the channel.
Move
œ √ Adjust
Return
10 When you have finished, press the EXIT ( ) button.
English-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
TV
Input
Source List
Edit Name
: TV
√
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ENTER ( ) button to select Input.
Move
Enter
Return
Result:
The options available in the Inputgroup are
displayed.
TV
TV
TV
TV
Source List
TV
3
4
Press the ENTER ( ) button again to select Source List.
AV1
AV2
AV3
: ------
: ------
: ------
Result:
The options available in the Source Listgroup are
displayed.
AV4/S-Video : ------
Component1
Component2
: ------
: ------
Press the ▼ or ▲ button to select signal source, then press the
ENTER ( ) button.
Move
Enter
Return
Input
When you connect equipment to the TV, you can choose
➢
between the following sets of jacks : AV1, AV2, AV3,
Component1or Component2 on the TV’s rear panel, and
AV4/S-Videoon the TV’s side panel.
Source List
Edit Name
: TV
√
√
You can also set these options simply by pressing the
➢
VIDEO (
)
button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
Move
Enter
Return
Edit Name
Edit Name
AV1
AV2
AV3
AV4
S-Video
Component1
Component2
œ
------
√
(
)
1
Press the MENU
button.
: ------
: ------
: ------
: ------
: ------
: ------
Result: The main menu is displayed.
2
Press the ENTER ( ) button to select Input.
Result:
The options available in the Inputgroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the ▼ or ▲ button to select Edit Name. Press the ENTER
) button.
Edit Name
(
AV1
AV2
AV3
AV4
S-Video
Component1
Component2
œ
DVD
√
Result:
The options available in the Edit Namegroup are
displayed.
: ------
: ------
: ------
: ------
: ------
: ------
Press the ▼ or ▲ button to select external device :
AV1 AV2 AV3 AV4 S-Video Component1
Component2.
-
-
-
-
-
-
Move
œ √ Adjust
Return
5
6
7
Press the ENTER ( ) button.
Select the name by pressing the ¦¤or button.
Set other signal sources (AV1
-
AV2
-
AV3
-
AV4
-
S-Video
-
Component1
-
Component2) using the same method as listed
above.
8
When you have finished, press the EXIT (
) button to exit.
English-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model)
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR or DVD. In this way you can
watch TV program or monitor the video input from any connected
TV
TV
TV
TV
Picture
…
More
devices while watching TV or other video input.
Tilt
PIP
: 0
√
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
Enter
Return
Press the ▼ or ▲ button to select Picture.
Result: The options available in the Picturegroup are
displayed.
PIP
PIP
œ
Off
√
3
4
Press the ENTER ( ) button.
Press the ▼ or ▲ button to select PIP. Press the ENTER (
button.
)
5
Press the ¦¤or button to On.
Move
œ √ Adjust
Return
PIP
Result:
The options available in the PIPgroup are displayed.
You can also activate the PIP simply by pressing the PIP
button. To deactivate, press it again.
➢
6
7
Press the ▼ or ▲ button to select Source.
PIP
:On
TV
Source
Swap
Size
Position
Programme
œ
√
√
Press the ¦¤or button to select a source of sub picture.
: Large
:
: P 1
Result:
The sources are displayed in the following order:
TV AV1 AV2 AV3 AV4/S-Video
-
-
-
-
In some PIP TV models, the PIP function will not operate if
the same source to the main picture is selected for the sub-
picture. When a TV channel is viewed on the main picture,
PIP is not available for TV channels. If a TV source is
selected, the message "Not available" will appear on the
screen. The PIP picture can be viewed only when a source
different from the main picture's is selected in the PIP
window.
Move
œ √ Adjust
Return
➢
PIP
PIP
Source
Swap
Size
Position
Programme
:On
:TV
√
: Large
:
: P 2
8
9
Press the ▼ or ▲ button to select Swap.
Press the ENTER ( ) button.
Move
Enter
Return
Result:
The main picture and the sub picture are
interchanged.
You can also interchange the main picture and the sub
picture simply by pressing the SWAP button.
➢
English-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
TV
PIP
10 Press the ▼ or ▲ button to select Size.
PIP
Source
Swap
Size
Position
Programme
:On
:TV
11 Select a size of sub picture by pressing the ¦¤or button.
√
√
Result:
The sizes are displayed in the following order:
Small 3PIP 4PIP 12PIP Large
3PIP/4PIP/12PIP
œ
Large
:
-
-
-
-
: P 1
: You can view up to 3,4, or 12 memorizer
channels on the sub picture
spontaneously.
Move
œ √ Adjust
Return
PIP
You can select these options simply by pressing the SIZE
button.
➢
TV
PIP
Source
Swap
:On
:TV
12 Press the ▼ or ▲ button to select Position.
√
Size
Position
Programme
:Large
œ
13 Press the œ or √ button.
√
Result:
The positions available are displayed.
- - -
: P 1
Move
œ √ Adjust
Return
PIP
You can select these options simply by pressing the
Position ( ) button.
➢
TV
14 Press the † or … button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
PIP
Source
Swap
:On
:TV
√
Size
Position
Programme
:Large
:
◆
◆
When the Sourceis set to TV, you can select the
➢
channel of sub picture.
œ
P 1
√
You can select the channel of the sub picture simply by
pressing the † or … button.
Move
œ √ Adjust
Return
15 When you have finished, press the EXIT (
) button to exit.
English-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
Easy functions of remote control
Buttons
PIP
Feature
Used to activate or deactivate the PIP function directly.
Used to interchange the main picture and the sub picture.
SWAP
When the main picture is in the Video mode and the
➢
sub picture is in the TV mode, you might not hear the
(
)
sound of main picture when pressing the SWAP
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
TV/VIDEO
SIZE
Used to assign a source of sub picture (TV
AV3 AV4/S-Video).
-
AV1
-
AV2
-
-
Used to select a size of sub picture (Small, 3PIP, 4PIP,
12PIPor Large).
POSITION
Used to move the sub picture counterclockwise.
Used to select the channel of sub picture.
P
/
English-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature (depending on the model)
Most television channels provide written information services via
teletext. Information provided includes:
◆
◆
◆
◆
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
➢
➢
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
Displaying the Teletext Information (depending on the model)
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
☛
◆ Information may be missing
◆ Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the
button.
or
Press the TTX/MIX (
Result: The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
) button to activate the teletext mode.
3
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX ( ) button again.
Press the TV ( ) button to exit from the teletext display.
English-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Page by Number (depending on the model)
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
resume.
(hold). Press the
(hold) again to
Using the various display options:
To display...
Press the...
◆
Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆
Hidden text
(reveal)
(answers to quiz games, for example)
◆
◆
The normal screen
(reveal) again
A secondary page,
(sub-page)
by entering its 4-digit number
◆
◆
The next page
(page up)
The previous page
(page down)
◆
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆
Normal screen
• Three times
English-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using FLOF to Select a Page (depending on the model)
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
2
Display the teletext contents page by pressing the TTX/MIX
) button.
(
Press the colored button corresponding to the topic that you wish
to select;the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
4
To display the previous or next page, press the corresponding
colored button.
To display the subpage, see the following steps.
◆
Press the
Result:
(sub-page) button.
The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
button.
Result:
The
Four 3-digit numbers are displayed in different colors.
button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
➢
2
Press the colored button corresponding to the page that will be
replaced.
3
4
Enter the new page number using the numeric buttons.
Repeat steps
2
and
3
for each page to be stored, using a
different colored button each time.
5
Press the
(store) button until the corresponding blocks blink.
English-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the External Input/Outputs
Rear of the TV
(depending on the model)
VCR
②
③
Decoder /
Video game device
Video disc player
Satellite receiver
①
or
➃
◆
“MONITOR OUT (or
2
)” is used for the audio/video output of current television programme.
①
This end can be fitted with:
◆
◆
A SCART connector
Three RCA connectors (Video + Audio-L and R)
②
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “AV 2 INPUT
1
2
(VCR) (or
)”
and the target VCR to “MONITOR OUT (or
)”
so that you can redirect the signal
1
2
from “AV 2 INPUT (VCR) (or
)”
to “MONITOR OUT (or
)”.
③
➃
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
1
When you wish to record a programme, connect the receiver to “AV 2 INPUT (VCR) (or
)”
and the
VCR to “MONITOR OUT (or
2
)”
so that you can redirect the signal from “AV 2 INPUT (VCR)
1
2
(or
)”
to “MONITOR OUT (or
)”.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
☛
English-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the DVD Player (depending on the model)
Rear of the TV
DVD
◆
◆
Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player. Connect the RCA Cable to “Y”, “PB”, and “PR” on the rear of your television
and the other end to the “Component Video Out (Y, PB, PR)” connectors of the DVD player.
Only black signal is output from a monitor in Componet1 or Componet2 mode.
Connecting to the Audio Output
➢
The “MONIOR OUT” (L-AUDIO-R) connectors are used for equipment, such as an audio system (to
take full advantage of the Surround sound effect).
Rear of the TV
(depending on the model)
Audio system
English-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the RCA Input
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
(RCA Model)
Side of the TV
(SCART Model)
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
①
Camcorder
VCR
and
①
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
When both the side AV and rear connectors are connected
to external equipments, the side AV receives priority.
☛
English-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
2
Check that all the necessary connections have been made.
(
)
Switch your television on, then press the VIDEO
button
repeatedly.
Result:
The input sources are displayed in the following
order:
◆
AV1
Component2. (RCA Model)
TV AV1 AV2 AV3/S-Video (SCART Model)
-
AV2
-
AV3
-
AV4/S-Video
-
Component1
-
◆
-
-
-
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
➢
English-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Degaussing to Remove Color Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER( )” button on the remote control.
☛
If your television will be left unattended, press the “ ” (On/Off) button to turn your
television off.
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆
◆
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
◆
◆
Check the volume.
Check whether the MUTE ( ) button on the remote control has
been pressed.
No picture or black and white picture
Sound and picture interference
◆
◆
Adjust the color settings.
Check that the broadcast system selected is correct.
◆
◆
◆
Try to identify the electrical appliance that is affecting the television,
then move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆
◆
◆
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
English-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English-51
Download from Www.Somanuals.com. All Manuals Search And Download.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03362A-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|