CA21XS2S
CP21XS2S
CA21YS2S
CP21YS2S
CA21KS2
CP21KS2
CA21KS2K
CP21KS2K
CA21SF1
Instruction Manual
Colour Television
CP21SF1
Fla t Scr een
Mu lt i Sys t em
CATV Hyp er Ba n d
2 5 6 Pr ogr a m m es wit h Au t om a t ic Tu n in g
AV St er eo Sou n d Sys t em
DVD In p u t wit h Vid eo Com p on en t
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
Warnings and Cautions . . . . . . . . . . . . . . 2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3
Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3
Front Control . . . . . . . . . . . . . . . . . . . . . 4-5
Remote Control Transmitter . . . . . . . . . . 6
Battery Installation of
the Remote Control Transmitter . . . . . . . 6
General Operation
Remote Control Operation . . . . . . . . . 7
OFF TIMER . . . . . . . . . . . . . . . . . . . . 8
ON TIMER . . . . . . . . . . . . . . . . . . . . . 8
Colour and Sound System
Setting of the Private Position . . . . . . . . 13
Setting of the OSD Language . . . . . . . . . 14
Connecting Other Equipment . . . . . . . . . 14
Connecting to the Rear AV1 Input
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
Selecting the Colour System in AV
Mode . . . . . . . . . . . . . . . . . . . . . . . .15
Connecting to a DVD Player with AV1(DVD)
Video Component output terminal . . .15
Connection to the Front AV2 Input
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting to the Monitor Output
Setting of the Colour System . . . . . . . 8
Setting of the Sound system . . . . . . . . 8-9
Picture Adjustment . . . . . . . . . . . . . . . . . 9-10
Audio Adjustment . . . . . . . . . . . . . . . . . . 10
Tuning of the Channels
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AV Connection to the Aerial Socket . . . . 16
Aerial Connection . . . . . . . . . . . . . . . . . . 17
Care and Cleaning . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . 18
Helpful
Automatic Tuning . . . . . . . . . . . . . . . 11
Semi-Auto Tuning and Manual Tuning. . 11
Hints-Problems/Solutions . . . . . . . . . . . 19
Channel Copy . . . . . . . . . . . . . . . . . . 12
Channel Swapping . . . . . . . . . . . . . . 12
Skip Channel Set and Cancel . . . . . . . . . . .12-13
Plug & Play
❒ Automatic setting up channels
This TV set provides a self-automatic tuning and
sorting system function called “Plug & Play”. It
automatically begins searching and storing of all
available channels when switching-on the TV set
for the first time.
Press any of the control buttons to make the
ending message disappear. Or will
automatically return to normal TV display
after 10 seconds.
2
✐ This procedure only appears at the first
switch-on time.
❒ Let’s Start !
Connect power cord of the TV set to a wall
outlet, and turn on the TV set by pressing the
Mains ON/OFF button. Self-automatic tuning
system will be started as follows;
■
If no TV stations are found, the display shown
below will appear. Please check if the antenna
is connected properly.
1
I
AM SEARCHING.
ALL PROGRAMMES.
PLEASE WAIT.
AUTO SET-UP
COMPLETED.
HAPPY VIEWING !
NO STATION.
PLEASE CONNECT
ANTENNA PLUG.
1
If it isn’t connected properly, connect antenna and
Automatic Tuning will be reset.
After completing this procedure, the programme
position 1 is selected and the ending messages on
the screen.
Note: The Plug & Play can be cancelled at any
time by pressing the MENU button.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Each button listed in this section has the same function as it’s corresponding
button on the remote control.
Front Control
Model CA21XS2S, CP21XS2S
Press to open
3 2
1
VIDEO L-AUDIO-R
TV/AV MENU
-
+
CH
10 9 8
7
6
5
4
Model CA21YS2S, CP21YS2S
Press to open
3 2
1
AV2 IN
TV/AV MENU
-
+
CH
VIDEO L-AUDIO-R
10 9 8
7
6
5
4
1. Mains ON/OFF Button
2. Remote Control Detector
3. Stand-by and Power Indicator
4. Programme UP/DOWN
5. VOLUME
7. TV/AV Selector
8. Audio Input Jack-Right (AV2)
9. Audio Input Jack-Left (AV2)
10. Video Input Jack (AV2)
6. MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Each button listed in this section has the same function as it’s corresponding
button on the remote control.
Front Control
Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K
Pull to open
P
O
W
TV
/A
V
E
R
M
E
N
U
-
+
C
H
7 6
5
4
3 2
1
L
-AUDIO-R
VIDEO
10
9
8
Model CA21SF1, CP21SF1
TV
/A
V
P
OW
M
E
N
E
R
U
-
+
CH
7 6
5
4
3 2
1
1. Mains ON/OFF Button
2. Remote Control Detector
3. Stand-by and Power Indicator
4. Programme UP/DOWN
5. VOLUME
7. TV/AV Selector
8. Audio Input Jack-Right (AV2)
9. Audio Input Jack-Left (AV2)
10. Video Input Jack (AV2)
6. MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Remote Control Transmitter
TIMER button
TV / AV
Power ON/OFF button
TV / AV Selector button
TIMER
MUTE button
RECALL/COLOUR SYSTEM button
Programme Selector button
P
P
-/- -
ALTERNATE button
DIGIT button
Programme UP button
SWAP
CH SCAN
CH
CHANNEL SCAN button
SWAP button
VOLUME - button
VOLUME + button
MENU
STEREO/MONO button
PICTURE MODE button
CH
PICTURE
SURROUND
A•B
MENU button
Programme DOWN button
SOUND
S. SYS
BASS
SURROUND button
BASS EXPANDER button
SOUND MODE button
SOUND SYSTEM button
JXPSG
❒ Battery Installation of the Remote Control Transmitter
1. Open the battery cover.
2. Install two “AA” 1.5 volt batteries so that the “+” and “-” marks on the batteries match the “+” and
“ - ” marks inside the unit.
3. Close the battery cover.
Note: Replace the batteries when the TV set is showing the following symptoms:
Operation is unsteady or erratic, sometimes the TV set does not work with transmitter.
Discharged batteries may leak and damage the unit. The normal life of batteries should be from
nine to ten months.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
General Operation
❒ Remote Control Operation
Standby/Power-on
To switch the TV on and off. For shutting off a power supply completely, Press the Mains
ON/OFF button on the front control of TV set.
Sound mute
To switch the sound from the speakers. The sound changes as follows; normal → mute ( ).
Timer
TIMER
To Adjust Timer function OFF-TIMER→ ON TIMER → ON PROGRAM
Recall/Colour system selector
To display the programme information on the screen.
It also operates as Colour system selector if the clear picture cannot be obtained even when
the broadcasting or AV signal is received.
Colour System and Sound System (SIF) could be changed in SEMI-AUTO and MANUAL TUN-
ING operation.
Direct programme selector
-/- -
For direct access to programmes using the (0-9) numeric button. For selection of analogue
programme position 10 - 255, Example: for programme position 17, Press the Digit button,
press “1” button. Press “7” button. For programme position 125 Press the Digit button twice. Press “2” button.
Press “5” button. For programme position 225 Press the Digit button 3 times. Press “2” button. Press
“5” button.
P
P
Alternate
To select the previous position and the present position.
Volume Up/Down
To adjust the sound volume level . Also operates as left ( ) and right ( ) cursor.
CH
Programme down/up
To select the next programme number or previous programme number. Also operates as up
(
) and down ( ) cursor.
CH
Swap
To swap the channels between two stored programme positions
SWAP
SOUND
Sound Mode
To select Sound mode; PERSONAL, MUSIC, TALK, NORMAL.
Stereo/Mono Button
A•B
Picture Mode
To select Picture mode; PERSONAL, DYNAMIC, NATURAL, ECO, GAME.
PICTURE
BASS
Bass Expander
To activate bass expander function.
Sound System
To select optimum sound system (BG → I → DK → M).
S. SYS
Surround
To activate Surround function.
SURROUND
Menu
To Call up the TV MENU.
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
8
General Operation
❒ Off Timer
❒ On Timer (Continued)
The OFF TIMER will switch off the TV automatical-
ly after 30 minutes, 1 hour, 1 hour and 30 minutes,
or 2 hours.
Press the VOLUME ( + or - ) button. The set
time will be increased or decreased by 10
minutes each time the button is pressed ; the
maximum time which can be set is 24 hours.
2
3
Press the TIMER button.
OFF 0:00
1
Use Direct Programme Selection to insert
programme position for when TV is switched
on by ON TIMER. (see page 7.)
Press the VOLUME ( + or - ) button to select
the time period.
2
■
■
■
Just one minute before switching off the TV,
“OFF 0:01” will be display on the screen.
To cancel the OFF TIMER, select “OFF 0:00”
by pressing the VOLUME (+ or - ) button.
The OFF TIMER cancels when the TV set is
turned off or if a power failure occurs.
■ If no operation is performed after the TV has
been switched on by the ON TIMER, such as if
you are not at home, the TV will be
automatically switched off after approximately
2 hours
■ If the TV is already switched on when the time
set for the ON TIMER has been reached, only
the programme position will be changed to the
set programme position.
■ Cancelling ON TIMER. To cancel the ON
TIMER, press the VOLUME ( + or - ) button to
set it to “ON 0:00” while the ON TIMER screen is
shown. Switching off the TV by pressing the
Mains ON/OFF button will also cancel the ON
TIMER settings.
❒ On Timer
When the ON TIMER is set. TV will automatically
be switched On to the selected programme position
when the specified time has elapsed.
Press the TIMER button twice.
1
(ON TIMER setting mode)
ON 0:00
2
Programme position for when TV is
switched ON by ON TIMER.
Colour and Sound System
❒ Setting of the Colour System
❒ Setting of the Sound System
Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained even when the
broadcasting or AV signal is received, press the
RECALL/COLOUR SYSTEM button repeatedly
until the optimum image can be produced.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)
To set the sound system, make it during Semi-Auto
Tuning or Manual Tuning mode.
When the sound is not clear or no sound is pro-
duced on a programme number position, select
sound system repeatedly until the optimum sound
is obtained.
(Refer to Broadcast Transmission System List
indicated by the last of this page in a setup of
Sound System.)
Each time the RECALL/COLOUR SYSTEM but-
ton is pressed, colour system changes as follows;
To select sound system:
■ Press the SOUND SYSTEM button to select the
sound system directly. The sound system will be
memorized automatically.
6
AUTO
6
PAL
or:
6
6
NTSC
1) Select “SIF” with the Programme UP or
DOWN button in the Semi-auto or Manual
Tuning mode. Then press the VOLUME (+ or
NTSC4.43
Note:Colour system is displayed according as
Colour system option.
-) button to select a optimum sound system.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Colour and Sound System
❒ Setting of the Sound System
(Semi-Auto or Manual Tuning mode )
Broadcast Transmission System List
MODE
SEMI
START
2
Colour
Sound
Country
Area
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
System System
AUTO
Union of Arab Emirates,
Kuwait, Oman, Qatar,
Yemen, Bahrain, etc.
Indonesia, Malaysia,
Singapore, Thailand,etc.
Middle
East
BG
OFF
--
PAL
B/G
SELECT
ADJUST
BACK
EXIT
Asia
China, etc.
Hong kong
D/K
I
PAL
PAL
BG
(5.5MHz)
I
(6.0MHz)
DK
M
(6.5MHz) (4.5MHz)
Saudi Arabia,
Iraq, Iran, Lebanon,etc.
B/G
SECAM
2) To enter a sound system selection into the
memory, select “MEMORY” and press the
Russian Federation,etc.
Myanmar, etc.
SECAM D/K
VOLUME + or
-
button.
M
NTSC
PAL
Australia,
New Zealand, etc.
MODE
SEMI
START
2
AUTO
BG
Oceania
B/G
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
OFF
OK
SELECT
ADJUST
BACK
EXIT
Picture Adjustment
❒ Picture Adjustment Menu
SHARPNESS : Adjusts picture detail.
WHITE TONE : Adjusts white balance.
FINE TUNING : Fine tuning in case of weak
broadcast signal or poor reception. Only
displayed in TV mode. Will not be displayed in
AV mode.
COLOUR
BRIGHTNESS
CONTRAST
WHITE TONE
TINT
FINE TUNING
SHARPNESS
40
SELECT
ADJUST
B
E
SELECT
ADJUST
BACK
EXIT
❒ Basic Picture Adjustment Operation
Page 1
Page 2
Press the MENU button for MAIN menu
display.
1
The 2nd page is not displayed when there is no
TINT adjustment.
PICTURE
AUDIO
PRESET
LANGUAGE
Picture Adjustment Item
COLOUR : Adjusts colour intensity.
BRIGHT : Adjusts picture brightness.
CONTRAST : Adjusts picture contrast.
TINT : Adjust colour tints. (Displayed only on
NTSC or NTSC4.43 system signal
reception.)
(MAIN MENU)
SELECT
ENTER
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Picture Adjustment
❒ Basic Picture Adjustment Operation (Continued)
■ To return to Main menu, press the
ALTERNATE button.
When “PICTURE” is not selected, select
“PICTURE” with the Programme UP or
DOWN button.
2
3
■ To return to the normal TV mode, press the
MENU button. ( Or will automatically return to
the normal TV mode after 20 seconds.)
PICTURE
AUDIO
PRESET
LANGUAGE
Select desired control by pressing the
Programme UP or DOWN button
4
Press the VOLUME + or
Picture Adjustment menu.
-
button to display
COLOUR
BRIGHTNESS
CONTRAST
SHARPNESS
WHITE TONE
FINE TUNING
COLOUR
BRIGHTNESS
CONTRAST
SHARPNESS
WHITE TONE
FINE TUNING
30
25
Press the VOLUME + or
settings.
-
button to alter
5
Audio Adjustment
❒ Audio Adjustment Operation
❒ Audio Adjustment Menu
Press the MENU button for MAIN menu
diplay.
BASS
TREBLE
BALANCE
BASS EXPANDER
SURROUND
1
2
OFF
OFF
Select “AUDIO “ by pressing the Programme
UP or DOWN button.
27
SELECT
ADJUST
BACK
EXIT
PICTURE
AUDIO
Audio Adjustment Item
BASS : Bass Adjustment
PRESET
LANGUAGE
Press the VOLUME + or
Adjustment menu display.
-
button for Audio
TREBLE : Treble Adjustment
3
BALANCE : Left/right speaker volume balance
adjustment
BASS
TREBLE
BALANCE
BASS EXPANDER
SURROUND OFF
OFF
27
BASS EXPANDER : Operates BASS EXPANDER
on and off
SURROUND :Operates SURROUND on and off.
Note: When the stereo signal is inputted from the
right and left audio input terminals in the AV mode,
surround mode is changed as follows;
“SURROUND” ON and “SURROUND OFF”.
■ To return to Main menu, press the ALTERNATE
button.
■ To return to normal TV mode, press the MENU
button. (Or will automatically return to normal
TV mode after 20 seconds.)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Tuning of the Channels
❒ Semi-Auto Tuning and Manual Tuning
Press the MENU button for MAIN menu
Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
display.
1
2
3
Select
Programme UP or DOWN button.
“PRESET”
by
pressing
the
Press the VOLUME
+
or
-
button for
2. Semi-Auto Tuning:
PRESET menu display. On entering
PRESET display, Automatic Tuning will be
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual Tuning:
selected initially.
Select “SEMI” or “MANUAL” by pressing the
Manually tune a channel if it cannot be
automatically tuned, such as when the signal is
poor.
4 VOLUME + or
-
button.
“SEARCH”
Programme UP or DOWN button.
Select
by
pressing
the
5
❒ Automatic Tuning
Press the MENU button for MAIN menu
MODE
SEMI
START
6
SEARCH
POSITION
SYSTEM
display.
1
2
AUTO
Select
“PRESET”
by
pressing
the
Semi-Auto Tuning:
Press and release the VOLUME + or
Programme UP or DOWN button.
-
button
to search for required TV station. Once a station
is located, tuning will automatically stop.
Continue till desired channel is located.
PICTURE
AUDIO
PRESET
LANGUAGE
Press the VOLUME
+
or
-
button for
MODE
SEMI
PRESET menu display. On entering PRESET
display, Automatic Tuning will be selected
initially.
3
SEARCH
POSITION
SYSTEM
6
AUTO
Manual Tuning :
Press and hold the VOLUME + or
search for required TV station.
-
button to
MODE
AUTO
START
1
AUTO
BG
SEARCH
POSITION
SYSTEM
SIF
MODE
MANUAL
SEARCH
POSITION
SYSTEM
Select
Programme UP or DOWN button.
“SEARCH”
by
pressing
the
6
AUTO
4
5
The VOLUME + button will move tuning toward the
higher frequencies, and the VOLUME button will
move tuning toward the lower frequencies.
MODE
AUTO
START
1
AUTO
BG
-
SEARCH
POSITION
SYSTEM
SIF
Once desired channel is located, select
“MEMORY” by pressing the Programme UP
6
Press the VOLUME (+) button to start
or DOWN button.
channel tuning.
CH
Press the VOLUME + or
-
button to enter the
7 desired channel into memory.
SKIP
OFF
OK
MENU
1
MEMORY
SELECT
ADJUST
BACK
CH
EXIT
After all receivable channels have been found and
stored, the TV set automatically returns to pro-
gramme position “1”.
To preset other Programme Positions, repeat steps
7.
5-
■ The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
Press the MENU button to return to normal
TV display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
12
❒ Channel Copy
This function can be utilized after Automatic
Tuning.
For example, to copy a TV channel on pro-
gramme position “2” onto programme position
“6”;
Press the DIGIT button, “ 1 “ button and then
“ 2 ” button on the remote control to enter
programme number 12. (For example, to
enter programme number “ 3 “, press “ 3 ”
button only. )
3
Select programme position “2”
SWAPPING
1
SWAP 6 AND 12
6
2
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
The two TV channels will now have changed
places.
2
Select “POSITION” with the Programme UP
or DOWN button.
3
Select position “6” with the VOLUME + or
button.
-
12
4
6
MODE
SEMI
START
6
AUTO
BG
SEARCH
POSITION
SYSTEM
SIF
❒ Skip Channel Set and cancel
Select “MEMORY” by pressing the
Programme UP or DOWN button.
When there is a position you do not use, Position 4
for example, by setting the SKIP Channel function it
is possible to jump over this position, when you are
5
6
7
Press the VOLUME
memorize.
+
or
-
button to
selecting
a
UP/DOWN or CHANNEL SCAN button.
channel using the Programme
Press the MENU button to return to normal
TV display.
3
5
4
❒ Channel Swapping
Use this channel swapping feature to swap the
channels between two stored programme position.
This feature is particularly useful after automatic
tuning.
Skip
For example, to set programme position “4” as
Skip channel ;
For example, to swap the channel between pro-
gramme position “6” and programme position
“12”.
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
1
2
3
Select “POSITION” with the Programme UP
or DOWN button.
Press remote control “4” button to select
programme position 4. Use the DIGIT button
and Programme Selector (Number buttons)
to enter programme number. Do not use the
12
6
Select programme position “6”.
1
2
VOLUME + or
position in this settings.
-
button to enter programme
6
MODE
SEMI
START
4
Press the SWAP button.
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
AUTO
BG
OFF
--
SWAP 6 AND
-
Download from Www.Somanuals.com. All Manuals Search And Download.
13
❒ Skip Channel Set and cancel (Continued)
Select “SKIP” by pressing the Programme UP
or DOWN button,then press the VOLUME +
Select “MEMORY” by pressing the
Programme UP or DOWN button, then press
4
5
or
-
button to set SKIP to ON. To cancel Skip
Channel function, set to OFF.
the VOLUME + or
-
button for memory.
MODE
SEMI
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
START
4
AUTO
BG
ON
OK
MODE
SEMI
START
4
SEARCH
POSITION
SYSTEM
SIF
SKIP
MEMORY
AUTO
BG
ON
Any number of channels maybe set as Skip
Channels.
SELECT
ADJUST
BACK
EXIT
Press the MENU button to return to normal
TV display.
6
Setting of the Private Posistion
Private position is used to restrict of pro-
gramme positions that you do not want others
to watch. Any position can be set as the Private
position.
❒ To View aProgramme on Private Position
Select private position (In this case position “15”).
1
❒ How To Set the Private Position
15
For example, to set the programme position
“15” as the private position.
Select programme position “15”.
1
Press and hold the RECALL/COLOUR
SYSTEM button for more than 2 seconds.
2
15
15
Press the RECALL/COLOUR SYSTEM
button for watching a TV programme.
Press and hold the RECALL/COLOUR
SYSTEM button for more than 2 seconds
3
2
15
AUTO
BG
Note: The position “15” is still in the private position.
15
❒ Cancelling of the Private Position
Select private position (position “15”).
15
AUTO
BG
The programme number “15” will shift to centre of 1
Press the MENU button.
the screen.
15
Press and hold the RECALL/COLOUR
SYSTEM button for more than 2 seconds.
3
2
15
15
AUTO
Press the MENU button.
BG
3
The picture will disappear, and “
play on the screen.
15” will be dis-
15
AUTO
BG
The private position setting is now completed.
The private position is now cancelled.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Setting of the OSD Language
Press the MENU button for MAIN menu
display.
ENGLISH
1
y
P
CC
N N
PICTURE
AUDIO
FRANCAIS
PORTUGUES
PRESET
LANGUAGE
Select “ENGLISH”, “
y
”, “
”,
Select “LANGUAGE
programme UP or DOWN button.
“
by pressing the
“
”, “FRANÇAIS”, “PORTUGUES” by
P
CC
N N
2
3
pressing the Programme UP or DOWN button. To
return to the normal TV mode, press the MENU
button.
PICTURE
AUDIO
PRESET
LANGUAGE
Press the MENU button to return to normal
TV display.
Press the VOLUME
Language menu display.
+
or
-
button for
4
Connecting Other Equipment
❒ Connecting To the Rear AV1 Input Jacks
Connecting to a Monophonic Video Recorder (AV1)
You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input
terminals of the TV set to enjoy the DVD and VIDEO programs.
INPUT
MONITOR OUT
■ To watch
video input
p i c t u r e ,
select AV1
position by
p r e s s i n g
the TV/AV
Selector.
■
When
a
monophonic video recorder is
AV1/DVD
connected to this product, connect the audio
output terminal of the video recorder to the L(left)
audio input terminal of the TV set.
R
(MONO)
L
R
L
To Audio Input-R (AV1)
To Audio Input-L (AV1)
V
I
D
E
O
■
To make sure the colour system of the TV set
is consistent with the signal of your video
recorder, if necessary, select a matching
system. The colour system set in AV mode
can be stored automatically.
To Video Input (AV1)
VIDEO
AV1
Video/DVD Player
■ When the stereo signal is inputted from the right
and left audio input terminals, each time the
SURROUND button is pressed (or selection of
On-screen Menu), surround mode is changed
■ When the audio signal from the VCR is stereo,
be sure to connect the right and left channels to
the respective right and left AUDIO IN terminals.
Then select “STEREO” channel of the audio
channel in the TV set with the remote control
as follows; SURROUND ON” and
“SURROUND OFF”.
“
A B
A B
button.Each time the button is
pressed, the AV Stereo mode is changed as follow,
SURROUND
ON
SURROUND
OFF
STEREO
MONO
Note: The effect of surround is not obtained
although the switching of surround is displayed
in this monaural connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
❒ Connecting To the Rear AV1 Input Jacks (Continued)
■
When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1.
Whenever the TV/AV button is pressed, the mode will change as follows:
AV1(DVD)
AV2
AV1
28
TV mode
(Optional
model)
■ You can select a TV programme while watching a playback from a VCR
For example:
● To select programme position “9” while watching a playback from external VCR, press “9” button of the
remote control. The TV set returns to the TV mode and programme “9” will be selected.
● To select the programme position “26”, press Digit (--/-) button, “2” then “6” button. Then TV set returns
to the TV mode and programme position “26” will be selected.
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.
❒ Selecting the Colour System in AV Mode
Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
AV1
NTSC
AV1
PAL
AV1
NTSC 4.43
Colour system setting for AV position is automatically stored in the memory.
❒
Connecting To a DVD Player with AV1(DVD) Video Component Input
Terminal (Y, Cb or Cr)
Connect the component output terminal on
your DVD player to the component video input
terminal of this product. (NOTE: When a sig-
nal of Y,Cb,Cr/Y,Pb,Pr is received, the output
signal from monitor output terminal will be cor-
responding but without colour (black and
white image).)
INPUT
MONITOR OUT
AV1/DVD
C
R
R
(MONO)
L
To Input Terminal CR
To Input Terminal CB
To Audio Input-R (AV1)
C
B
To Audio Input-L (AV1)
Y
To Input Terminal
Y
■
To watch a program in this connection
status, select AV1(DVD).
28
AV1
AV1(DVD)
AV2
(Optional
model)
(TV mode)
■
Make sure the component video terminal (Y, Cb or Cr)
is connected correctly.
Video/DVD Player
Download from Www.Somanuals.com. All Manuals Search And Download.
16
❒ Connecting To the Front AV2 Input Jacks (Optional Model)
It is convenient to use the AV input jack on the front panel for equipment
that is often connected and disconnected.
■ To watch the Front AV2 video
input picture, select AV2
position by pressing the TV/AV
Selector.
AV2
Video/DVD Player
* Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal.
❒ Connecting To the Monitor Output Jacks
The picture signal being displayed on the TV screen is
INPUT
MONITOR OUT
output through the Monitor Output Jacks. Use these
terminals to record TV broadcasts and for video dub-
bing from AV1 or AV2 input terminals.
AV1/DVD
R
L
To Audio Output-R
To Audio Output-L
■ To record TV programme, select TV mode by
pressing the TV/AV Selector and record the
desired programme.
V
I
D
E
O
To Video Output
15
TV mode
To video and
audio inputs
■ To dub video from the AV1 terminal input, select
AV1 position and by pressing the TV/AV Selector.
VCR for Recording
AV1
❒ AV Connection To the Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
PLAYBACK
1. Playback the VCR .
2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and
Manual Tuning on pages 11.)
VCR for
playback
Aerial Socket
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Aerial Connection
❒ Connecting Outdoor Aerial
Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back.
Outdoor Aerial
Aerial Cable
Aerial Socket
For all aerial circuit problems please consult your local dealer.
Care and Cleaning
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol
sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the Television.
2. Clean the screen with a soft cloth dampened with glass cleaner or warm water.
3. Clean the cabinet with a soft cloth dampened with a mild household detergent and warm water. Dry
thoroughly.
Note: NEVER spray liquids on the screen because they can run down and drip onto the chassis. This
may cause component failure not covered under Warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Specifications
Power Source
AC 127-240 Volts, 50/60Hz
PAL/NTSC4.43/NTSC/PAL-60Hz
B/G, I, D/KK’, M/M
Colour System
Sound System
Channel Coverage
VHF: E2-E12, A2-A13, R1-R12, J1-J12, K1-K9
UHF: 21-69, A14-A69, J13-J62,
CATV: S1-S41, X, Y, Z, Z+1, Z+2
Aerial input impedance
Audio output (RMS)
75 Ω
Model: CA21YS2S, CP21YS2S, CA21KS2, CP21KS2, CA21SF1,
CP21SF1, CA21KS2K, CP21KS2K: 5W + 5W
Model: CA21XS2S, CP21XS2S: 10W + 10W
Speakers
Model: CA21YS2S, CP21YS2S, CA21KS2, CP21KS2, CA21SF1,
CP21SF1, CA21KS2K, CP21KS2K: 5 cmx 9 cm x 2 pcs
Model: CA21XS2S, CP21XS2S: 6 cm x 12 cm x 2 pcs
Ext. terminals
DVD Video Component: Composite/Component Y, CB,CR input
Video Inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 Ω) *
Audio Inputs: Phone Jack (L/R) x 2 (436mVrms, impedance more than 40KΩ) *
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 Ω)
Audio monitor outputs: Phone Jack (L/R) x 1 (436mVrms, impedance less than 600Ω)
* Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal.
Dimension:
Model CA21SF1, CP21SF1: 580(W) x 465(H) x 381(D) mm
Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K: 580(W) x 465(H) x 326(D) mm
Model CA21YS2S, CP21YS2S: 598(W) x 465(H) x 396(D) mm
Model CA21XS2S, CP21XS2S: 654(W) x 467(H) x 385(D) mm
Weight:
Model CA21SF1, CP21SF1: approx. 20.0 Kg
Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K: approx. 19.7 Kg
Model CA21YS2S, CP21YS2S: approx. 20.1 Kg
Model CA21XS2S, CP21XSS: approx. 19.6 Kg
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Helpful Hints - Problems/Solutions
Before requesting service check the following chart.
Problem:
Check these Conditions / Try these solutions:
No picture,
no sound
● Check if TV is plugged in.
● Try a different channel, if OK, probably station trouble.
● Adjust Brightness or Contrast control.
● Adjust Fine Tuning. (See page 9.)
Poor picture,
sound OK
● Check aerial connection.
● Adjust Colour or Tint control. ● Adjust Fine Tuning. (See page 9.)
No colour,
Picture OK
●
Check aerial connection.
●
Is the programme in colour ? Try a different channel.
● Select other colour system. (See Setting of the Colour System on page 8.)
● Check aerial connection on back of TV set.
Weak picture
● Check aerial for broken wires. ● Re-orient aerial.
●
Sound Mute may be on. Press the SOUND MUTE button on the remote control.
No sound or poor
sound.
● Adjust Volume. May be station trouble. Try a different channel.
●
● Select other sound system. (See Setting of the Sound System on page 8-9.)
● Check batteries. Replace batteries.
Remote Control
will not work.
● Check if TV set is plugged in. Aim remote control towards front of TV.
● Channel may be removed from memory. Add channel to memory manually.
Cannot select or
scan some channels.
(See “Skip Channel Set and Cancel” on page 12-13.)●Check aerial connection.
Blue screen with AV1
or AV1(DVD) or AV2
is displayed.
● Check AV connection. Press the TV/AV Selection button.
● Check external equipment. Switch on external equipment.
Black screen with
and programme
position displayed.
● Check to see if channel is set as the Private Position. See “Setting of the
Private Position” on page 13.
Cabinet makes
popping sound.
● This is a normal condition during warm-up and cool down of the plastic
cabinet parts.
● Keep away your TV set from magnetic source, then turn-off your TV set and
disconnect TV's power cord from AC outlet, keep this condition about 30-60
minutes and turn-on again your TV set if time is reach. If colour spot is not
disappear after this solution have done, please contact your local dealer.
Colour Spot On
The CRT
The following faults are not caused by the receiver:
“GHOSTS”
Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”.
These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one
suited for your area.
“INTERFERENCE”
Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be
a temporary condition, but should this interference persist, contact your dealer.
“SLANT”
If the picture of TV set is not properly horizontal (slant), try to change face direction of your TV set. This
case may be caused by geo-magnetic on your place where you live.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part No. 1AA6P1P5578-A BE4D-A (FC8-A)
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO ELECTRIC Co., Ltd.
|