INSTRUCTION MANUAL
Micro Component System
DC-DAB03
SLEEP
/ON
FUNCTION
MEMORY OPEN/CLOSE
MUTE
OVER
USB
CD
PRESET
/FOLDER
RANDOM
FM MODE/
DISPLAY
TUNER/BAND
REPEAT
SOUND
BASS
.
.
S
R
D
Digital Audio Broadcasting
REMOTE CONTROLLER RB-DAB03
Problems with set-up?
Call 0870 240 7475
Calls cost a maximum of 8p per
minute during peak periods,
based on BT rates of April 2004.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
CAUTION
THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE. TO
ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS
OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PROD-
UCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC
É
LECTRIQUE NE PAS OUVRIR.
-
-
-
The apparatus shall not be exposed to dripping or splashing.
Do not use where there are extremes of temperature (below 5°C or
exceeding 35°C), or where direct sunlight may strike it.
Because of the CD player’s extremely low noise and wide dynamic
range, there might be a tendency to set the volume on the amplifier
unnecessarily high. Doing so may produce an excessively large output
from the amplifier which could damage your speakers.
When carrying the unit, be sure to remove a disc which may be inside
and turn the power off. Wait at least 10 seconds, then unplug the
mains lead from theAC outlet. Carrying the unit with a disc inside may
damage the disc and/or the unit.
Sudden changes in the ambient temperature may cause condensation
to form on the optical lens inside the unit. If this happens, take out the
disc, leave the unit for about 1 hour, and then proceed to operate.
The system’s speakers use powerful magnets. Do not place
timepieces, credit cards, cassette tapes or video tapes, etc. near the
speakers.
-
-
No object filled with liquids, such as vase, shall be placed on the
apparatus.
The rating label is located on the bottom of the main unit.
-
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
-
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
-
-
-
In the European Union there are separate collection systems for used
electrical and electronics products.
Please help us to conserve the environment we live in!
Do not install this equipment in a confined space, such as a bookcase
or built in cabinet.
IMPORTANT
If the plug supplied with this equipment is not suitable for the socket
outlets in your home it should be cut off and replaced with the correct
type.
The wires in the mains lead are coloured in accordance with the follow-
ing code:
Blue
Neutral
Live
Brown
Disposal of Plug
The wires in the mains lead must be connected to the terminals in the
plug as follows:
If the non rewireable plug is to be cut off, the removed plug should be
disposed of carefully as there is a shock hazard should the plug be
inserted into a live socket.
Wire colour
Blue
Plug terminal marking
N or Black or Blue
L or Red or Brown
Brown
Replacing Fuse
Do not connect either wire to the earth terminal.
The detachable fuse cover must be replaced after changing the fuse.
Only a 3A fuse should be used and should comply with BS1362 and
If the mains plug contains a fuse this should be 3A, if a plug without a
fuse is used the distribution board fuse should not be greater than 5A.
should carry the ASTA mark
.
The unit is not disconnected from the mains unless it is unplugged from the AC outlet.
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
L ch speaker
R ch speaker
FM Aerial
+
LEFT
_
FM
ANT
_
+
LEFT
_
RIGHT
DAB
ANT
70Ω
SPEAKES
(6Ω MIN
+
_
PHONES
IN
LINE
RIGHT
+
R
L
To an AC outlet
Video/Auxiliary equipment
Note:
Note:
-
Do not connect the mains lead to an AC outlet until all connections
have been made.
The system is not completely disconnected from the mains when the
z/ON button is set to the z position.
To minimize noise, the speaker, mains and any other leads should not
come close to the FM aerial lead and DAB aerial lead. Do not place the
aerial leads close to the system.
-
Video/Auxiliary equipment
Connect audio leads (not supplied) from the audio output sockets of a
video/auxiliary equipment to the LINE IN sockets.
Speakers
Connect the connector of the left speaker to the “L” SPEAKERS socket
and the connector of the right speaker lead to the “R” socket.
When connecting the speakers, make sure that + and – polarities are
matched properly. Otherwise, the sound may appear to be lacking in the
bass range and stability.
Headphones
Connect stereo headphones (not supplied) to the PHONES socket (the
rear of the unit) for monitoring or for private listening. The speakers are
automatically disconnected when headphones are connected.
Connect the red speaker wire to the red terminal + and the black wire to
the black terminal –.
Aerial
FM aerial
Extend the aerial wire as straight as possible and, while listening to the
sound from the system, secure it in a position which yields minimal distortion
and noise.
DAB aerial
Extend the aerial wire as straight as possible and while listening to the
sound from the system, secure it in a position which yields minimal distortion
and noise, you can fix the aerial on walls with tape or hang up the wire
through the terminal holes on the wall where there are proper nails or
hooks.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
2
General
1. Power button ( z/ON)
2. Display
3. Function select button (FUNCTION)
4. Volume control button (VOLUME/PTY SELECT)
5. Memory button (MEMORY)
3
1
6. Economy mode/Clock/Timer button (
7. Remote sensor (IR)
/CLOCK/TIMER)
4
5
7
6
CD player/Tuner
1. PTY select button (VOLUME/PTY SELECT)
2. Disc tray open/close button (OPEN/CLOSE)
3. FM mode/Display button (FM MODE/DISPLAY)
4. DAB select/PTY check/Random button (SELECT/PTY CHECK/
RANDOM)
5. Disc tray
1
9
8
6. DAB set up/RDS mode button (SET UP/RDS MODE)
7. Auto tune/Tuner preset/Folder select button (AUTO TUNE/TUNER
PRESET/FOLDER SELECT)
2
3
4
5
8. DAB function button (DAB)
9. Control panel
7
6
i: CD play/pause button
f/–, +/e: Skip/search/tuning/file select button
n: Stop button
REMOTE CONTROL
1. Sleep button (SLEEP)
2. Memory button (MEMORY)
3. Power button ( z/ON)
4. Disc tray open/close button (OPEN/CLOSE)
5. Number buttons (1 - 9, 0, OVER)
6. Volume control buttons (VOL –, VOL +)
7. CD play/pause button (CD i )
8. Random/select button (RANDOM/SELECT)
Number buttons (1 - 9, 0, OVER)
These buttons are used to select the track numbers
on a disc or preset radio stations.
If the function is “CD”, the buttons select the track
numbers on a disc.
If the function is “TUNER”, the buttons select preset
radio stations.
Example:
Controls
1
2
3
SLEEP
/ON
FUNCTION
MEMORY OPEN/CLOSE
19
18
4
5
9. FM mode/Folder select button (FM MODE/ To select No. 3, press 3.
FOLDER)
To select No. 25, press over, 2 then 5.
MUTE
OVER
10. Bass expander button (BASS)
11. Sound preset button (SOUND)
12. Set up/Repeat button (SET UP/REPEAT)
13. Display button (DISPLAY)
14. Stop button ( n )
If the function is “DAB”, the buttons select preset
DAB stations.
Example:
To select No. 3, press 3.
To select No. 10, press 0.
6
17
16
DAB
CD
15. Auto tune/Preset button (AUTO TUNE/PRESET) With any other function, the buttons will not function.
7
AUTO TUNE
/PRESET
RANDOM
/SELECT
16. DAB function button (DAB)
17. Skip/Search/Tuning buttons ( f/TUNING – ,
e/TUNING +)
18. Mute button (MUTE)
19. Function button (FUNCTION)
15
14
13
12
11
8
SET UP
FM MODE
/FOLDER
DISPLAY
/REPEAT
9
SOUND
BASS
10
REMOTE CONTROLLER RB-DAB03
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control range
Inserting batteries
1.
2.
Remote sensor
Within approx. 7 meters
Two R03/AAA batteries
(not supplied)
30˚
30˚
Notes:
Always remove batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
SLEEP
/ON
FUNCTION
MEMORY OPEN/CLOSE
MUTE
OVER
The buttons on the remote control perform similar functions to similarly
marked buttons on the front panel.
ADJUSTING THE CLOCK (Main unit only)
When the unit is first connected to the AC power line, “DAB/MP3” blinks.
To cancel this mode, turn the power on or press the
button.
4. Turn the VOLUME control to set the “minutes”.
/CLOCK/TIMER
Example: To set “6:30”,
First, press the z/ON button to turn the power off. Only the clock display
appears dimly. If the main unit is in economy mode, press the
CLOCK/TIMER button till the clock display appears.
/
5. Press the MEMORY button. The clock starts.
or
-
The time can be set accurately by pressing the MEMORY button when
a time signal is heard.
1. Press the MEMORY button for at least 3 seconds.
-
-
To display the clock during operation, press the
/CLOCK/TIMER
button briefly. After a few seconds, the original display returns.
If a power failure occurs or the mains lead is disconnected, and the
clock display blinks. Reset the time again.
The hours display blinks.
2. Turn the VOLUME control to set the “hours”.
Changing the clock to the 12-hour display (Using the main unit)
1. Press the z/ON button to turn the power off, press the
TIMER button till present time displays.
/CLOCK/
2. While clock is displaying, press the n button and hold it, then press
the FM MODE/DISPLAY button.
Example: 13:00 v PM 1:00
3. Press the MEMORY button.
The minutes display blinks.
To return the original setting, repeat steps above.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE OPERATION
Turning the power on and off
Adjusting the volume
Press the z/ON button, the display lights.
To turn the power off, press the z/ON button again, the display turns off,
the clock display remains lit dimly. When economy display mode is needed,
Turn the VOLUME control, or press the VOL – or VOL + button on the
remote control. The volume level appears by numbers (VOL MIN ~ VOL
MAX) on the display.
press the
/CLOCK/TIMER button, then the clock display goes out.
-
When the mains lead is connected to theAC outlet, the unit will respond
to commands from the remote control.
Bass expander system (Remote control only)
Press the BASS button to enhance the bass sound. “BASS ON” appears
on the display briefly.
Direct start function
If the following buttons are pressed when the unit is in standby, the
unit turns on automatically and the selected function is set.
Selecting the sound mode (Remote control only)
Press the SOUND button to select the sound mode matching
the music to be listened to.
POP: Pops, etc.
CLASSIC: Classical music, etc.
ROCK: Rock music, etc.
JAZZ: Jazz, etc.
CD section
i
DAB section
Remote control
DAB
CD i, DAB
Selecting the function
Press the FUNCTION button to select the desired function. Each time the
button is pressed, the display changes to select following functions:
CD v Tuner v DAB v LINE v CD v …
The function is automatically selected when CD play is started or when
the DAB button has been pressed.
WHAT TO DO IF ...
If the operation of the unit or display is not normal,
1. Disconnect the mains lead.
2. Connect the mains lead again.
-
When the function selection is changed, CD play is automatically
stopped.
3. Within 5 seconds while pressing the SET UP/RDS MODE button, press
the MEMORY button at the same time.
4. Resume the operation.
CD PLAY
Use compact discs bearing the symbol shown. In
addition to conventional 12 cm CDs, this system
can be used to play 8 cm CDs without an adapter.
Notes on handling compact discs
-
Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
-
-
-
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals such as record cleaning sprays, antistatic sprays
or fluids, benzene or thinner to clean compact discs.
-
-
This unit can play back the CD-R/RW that have
recorded music data as well. However, some CD-R/RWs can not be
played back depending on the recording conditions.
The CD-R/RW can’t be recorded in this unit.
-
-
If the disc is loaded, you can turn the unit on and begin play
immediately by pressing the CD i button.
1. Press the FUNCTION button to select “CD” function. “READING”
appears on the display, then “READING” is replaced by the CD mode
display.
To start play from the desired track
2. Press the OPEN/CLOSE button, disc tray slides out, “OPEN” appears.
3. Place the disc with the label facing
up on the disc tray. (Place only one
Select the track by using the e or f button, then press the CD i
button.
disc at a time.)
4. Press the OPEN/CLOSE button
again to close the disc tray. “CLOSE”
Temporarily stopping play
Press the CD i button. Elapsed playing time blinks and “a” appears.
To resume play, press the button again.
appears briefly, then the total
number of tracks and total playing
time on the disc appear.
Note:
If no disc is loaded. “NO DISC” appears. If the disc is loaded with the label
facing downward, or if the disc being loaded can’t be read by the unit,
“UNDISC” appears. If this occurs, load the disc correctly or replace the
damaged disc.
Skip play
To skip to track 6 while track 3 is playing, press the e button repeatedly
until “6” appears (in the track section) on the display. To skip back to track
3 while track 6 is playing, press the f button repeatedly until “3” appears.
5. Press the CD i button. Play
starts from the first track.
-
The number buttons on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press 6.
The current track number and
elapsed playing time are
displayed.
Search (forward/reverse)
If the e or f button is pressed during play, the player will search at
high speed in the forward or reverse direction while the button is being
pressed. When the button is released, normal play will continue.
6. Press the n button to end disc play.
When the last track has been played, the player stops automatically.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a track by using the e or
Random play
f button.
Press the SELECT/PTY CHECK/RANDOM button (or RANDOM/SELECT
button on the remote control) in playing or stop mode. “RAN” will appear
on the display.
In stop mode, press the i button to begin random play; in playing mode,
random play begins when current track is over. All tracks on the disc are
played in random order.
-
The number buttons on the remote
control can also be used.
3. Press the MEMORY button
4. Repeat steps 2 - 3 to programme
additional tracks.
To cancel random play mode, press the SELECT/PTY CHECK/RANDOM
button (or RANDOM/SELECT button on the remote control) again, till “RAN”
disappears.
5. Press the i button to start
programmed play.
-
Random play will not function during programmed play.
When all programmed tracks have
played, the player stops auto-
matically. First programmed track
appears on the display.
Repeat play (Remote control only)
Press the SET UP/REPEAT button before or during play.
-
Press the button once, “ 1”
appears, repeat single track.
-
The programme contents are retained in memory.
-
-
Any attempt to programme more than 40 tracks will result in “FULL”
being displayed and discontinuation of the programming.
To cancel programmed play, press the n button twice.
-
Press the button twice, “
”
appears, the unit will repeat all
tracks or all programmed tracks.
Checking the programme
Each time the MEMORY button is pressed in the stop mode, the
programmed details sequentially appear on the display.
To cancel repeat play, press the button again till “ ” disappears.
Changing a programme
To add a new track to a programme:
1. In the stop mode, press the MEMORY button repeatedly until “0” (on
the track section) is displayed.
2. Select a track as explained above.
3. Press the MEMORY button.
PROGRAMMED PLAY
Up to 40 tracks on a disc can be programmed for play in any order.
-
-
-
First, select “CD” function and load a disc that you want to programme.
The tracks must be programmed in the stop mode.
The same track can be programmed more than once.
To change a track:
1. In the stop mode, press the MEMORY button repeatedly until the track
number to be replaced is displayed.
1. Press the MEMORY button.
2. Select a track as explained above.
3. Press the MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.
MP3 CD OPERATION
This unit can play back the CD-R/RW that has recorded music data or
MP3 files. Before playing back MP3 CD, please read the following.
Limitations on display
Available letters for display are the following: capital alphabets ofAthrough
Z, numbers of 0 through 9 and _ (underline).
MP3 CD information
-
MP3 CD is the disc that standardized by ISO9660, its file name must
have the extension letters, “.MP3” or “.mp3”.
Standard, sampling frequency, and the bit rate:
MPEG-1 Audio, layer 3
MP3 CD directory sample
Playback order: song01 v song02 v ... v song14
Folder number F01
-
There is no MP3 file. The unit skips it.
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz
of sampling frequency and 128kbps of constant bit rate.
The directory and file names of the MP3 CD must be corresponded to
the ISO standardized files.
MP3CD
F01 albumF01
-
-
song01.mp3
song02.mp3
song03.mp3
song04.mp3
song05.mp3
doc01.doc
photo01.jpg
-
-
Single-session disc can be played back.
This unit can recognize up to 250 folders or 500 files per disc.
The CD disc with 251 folders or 501 files and over is not available to
this unit.
-
-
-
-
This unit can recognize up to 8 directory trees per disc.
MP3 CD may not be played in the recorded order.
Music section in “CD Extra” can be played back, not Data section.
“Mixed CD” can’t be played back.
F02 albumF02
F04 albumF04
song06.mp3
song07.mp3
song08.mp3
song09.mp3
song10.mp3
song13.mp3
song14.mp3
Notes on disc writing method
There are three basic methods for writing to a CD: “Track-at-Once”, “Disc
at-Once”, and “Packet Writing”.
Music files recorded by “Track-at-Once” or “Disc-at-Once” can be played
back on this unit. (Note: The unit can’t play back the music files added
with “Track-at-Once”.)
F03 albumF03
song11.mp3
song12.mp3
Music files recorded by “Packet Writing” can’t be played back.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
5. Press the i button to start play, the track number and elapsed
-
Some MP3 CDs can’t be played back depending on the recording
playing time will display.
conditions.
-
The CD-R/RW that has no music data or non-MP3 files can’t be played
back.
-
-
Do not make an empty folder. It may not work correctly.
In this model, recommend recording setting is 44.1KHz of the sample
frequency and 128kbps of constant bit rate. If files are recorded in
other bit rate (for example: 320kbps) or in variable bit rate, track-jump
may sometimes happen according to recording conditions.
Display selection
The ID3-Tag is an information field for MP3. Music title, artist name and
album name can be stored into the tag. This unit shows these information.
Press the FM MODE/DISPLAY button (or DISPLAY button on the remote
control) during play.
MP3 CD PLAY
1. Turn the power on and choose “CD” function.
2. Load the MP3 CD.
-
Each time the button is pressed, the display scrolls in the following
sequence.
The total number of files appear on the display.
Folder name (Album name)/File name (Music name)
Music information: music title
Music information: artist name
Music information: album name
-
If no music information is stored, “NO INFORMATION” appears. Press
this button again, the track number and elapsed playing time appear.
3. Press the AUTO TUNE/TUNER PRESET/FOLDER SELECT button
(or the FM MODE/FOLDER button on the remote control) to select
the desired folder.
Folder selection
Press the AUTO TUNE/TUNER PRESET/FOLDER SELECT button (or
the FM MODE/FOLDER button on the remote control) repeatedly to select
the desired folder number. The first file number in the selected folder
appears. In playing mode, after the desired folder is selected, the unit will
play automatically from the first track in it; In stop mode, press the i
button to start play from the first track of this folder.
the first file number in the selected folder
4. Press the f or e button to select the desired track. The folder
number and track number in current file roll over the display.
the desired
file number
folder
number
track number
in current file
LISTENING TO THE RADIO
3. Press the AUTO TUNE/TUNER PRESET/FOLDER SELECT button
Automatic/Manual tuning
1. Press the FUNCTION button to select FM tuner.
on the front panel (or AUTO TUNE/PRESET button on the remote
control) to select the channel number to be preset.
-
The radio frequency appears.
2. Automatic tuning
Press the f or e button for at least 1 second to tune in a station.
The unit will scan up or down the band and receive the next receivable
station. Press the button again to continue.
Manual tuning
Press the f or e button briefly until the desired frequency is
displayed.
4. Press the MEMORY button.
-
-
In this example, “103.25MHz” FM station is preset on FM channel 9.
The number buttons on the remote control can be used to preset the
station directly. In this example, press 9 after the step 2 above.
To preset stations
Note:
Up to 20 stations for FM band can be preset.
1. Tune in the station to be preset as described in “Automatic/Manual
tuning”.
If the next step is not taken within 8 seconds while performing steps 2 - 4,
“MEM” disappears and the preset operation is cancelled.
Press the MEMORY button to continue.
2. Press the MEMORY button.
5. Repeat steps above to add more preset stations.
-
When presetting a new station, the previous preset station is cleared.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
“PTY” appears, then broadcast programme type is displayed. If no
PTY signal is received, “NO PTY” appears, then station name or station
frequency is displayed.
Listening to preset stations
1. Press the FUNCTION button to select FM.
2. Press the AUTO TUNE/TUNER PRESET/FOLDER SELECT button
(or the AUTO TUNE/PRESET button on the remote control) to select
the desired channel number. The selected channel number appears
briefly.
RT (Radio Text)
“RT” appears, then text messages the station sends will be displayed.
If no RT signal is received, “NO RT” appears.
Frequency
-
The number buttons on the remote control can also be used.
Station frequency (non-RDS service)
After several seconds, the PS mode returns if RDS signal is received.
To receive FM stereo broadcasts
“ST” appears when a FM stereo broadcast is received in the stereo mode.
On characters displayed
When the display shows PS, PTY or RT signals:
-
-
The display shows upper case letters only.
The display cannot show accented letters: for example, “A” may
represent accented “A’s” like “Á”, “À”, “Ô, “”, “Å” and “Ä”.
-
If the signal from a FM stereo station is weak and reception is poor,
press the FM MODE/DISPLAY button to change to the mono mode.
The reception may be improved, but the sound will be monaural.
To search a preset station by PTY codes
A particular programme type broadcast can be located by specifying the
PTY codes.
1. Press the SET UP/RDS MODE button till “PTY” appears while listening
to a FM station.
2. Press the SELECT/PTY CHECK/RANDOM button, then turn the
VOLUME/PTY SELECT control on the main unit within 2 seconds to
select the desired PTY code. The code changes as shown below:
NEWS: News
Listening to FM station with RDS (Using the main unit)
RDS (Radio Data System) permits FM stations to send additional signals
with the regular programme signals. For example, the stations send their
station names and information about what type of broadcast programmes,
such as sports or music, etc. When tuned in a FM station which provides
the RDS service, the “PS” RDS mode is set automatically and the station
name “RDS” appears on the display.
AFFAIRS: Current affairs
INFO: Information
SPORT: Sport
EDUCATE: Education
DRAMA: Drama
CULTURE: Culture
SCIENCE: Science
VARIED: Varied
POP M: Pop music
ROCK M: Rock music
MOR M: Middle of the road music (easy-listening)
LIGHT M: Light classics
CLASSICS: Serious classics
OTHER M: Other music
Note:
-
-
-
Some FM stations do not provide RDS service.
RDS may not work correctly if the signal strength is weak.
RDS is not available for AM broadcasts.
Selecting the RDS display mode
Press the SET UP/RDS MODE button on the main unit while listening to a
FM station.
(or in the reverse sequence)
-
Each time the button is pressed, the display mode changes as follows:
PS v PTY v RT v Frequency
If the RDS signal is weak or current FM station has no RDS information,
when the SET UP/RDS MODE is pressed, “RDS OFF” appears.
3. Press the SELECT/PTY CHECK/RANDOM button within 10 seconds.
The unit searches 20 preset stations and stops when it finds a
broadcast of the PTY code you have selected, then tunes into that
station and “RDS” appears.
-
-
To continue searching after the first stop, press the SELECT/PTY
CHECK/RANDOM button again while the display blinks.
If no broadcast is found, “NO PTY” appears, then the original station
is heard.
PS (Programme Service)
“PS” appears on the display then station name is displayed. If no PS
signal is received, “NO PS” appears briefly, then station frequency is
displayed.
-
To cancel searching, press the SELECT/PTY CHECK/RANDOM button.
PTY (Programme Type)
LISTENING TO THE DAB RADIO
Press the f or e button repeatedly to select the desired tuning mode
To turn the unit on and listen to the last received station, press the
DAB button.
while “
or SELECT” appears.
DAB Reception
Press the FUNCTION button to select DAB function.
If it is the first time for use or have reset the main unit as “About DAB radio
what to do if...” (see page 10) shown, following display appears.
The unit will scan the receivable station.
-
If tuning to a selected station fails,
Manual Tuning
1. When “Manual tune” is selected, press the SELECT/PTY CHECK/
RANDOM button (or the RANDOM/SELECT button on the remote
control).
2. Press the f or e button briefly to select the stored frequencies.
The display changes as follow:
-
If the previously selected service is still available, the system will
reselect it.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
5A 174.92MHz v 5B 176.64 MHz… v 13E 237.48 MHz v 13F
239.20 MHz v 5A 174.92 MHz v …
( or in reverse order)
Display value changes as following:
DRC 0 v DRC 1/2 v DRC 1 v DRC 0 v ..
3. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control) to confirm your option.
Example:
Language
When “language” is selected, press the SELECT/PTY CHECK/RANDOM
button (or the RANDOM/SELECT button on the remote control) to confirm
it.
“English” appears.
Note: Only English is available.
3. When your desired frequencies appears, press the SELECT/PTY
CHECK/RANDOM button (or the RANDOM/SELECT button on the
remote control) to select the station.
SW version
When “SW version” is selected, the version value of current station is
appears on the display at the same time.
Automatic Tuning
1. When “Autoscan local” or “Autoscan full” is selected, press the
SELECT/PTY CHECK/RANDOM button (or the RANDOM/SELECT
button on the remote control).
SW version value
Display
The unit will search the receivable station automatically.
-
-
Autoscan local: scans all the UK frequencies.
Autoscan full: scans European L Band and III Band frequencies.
When a station is received, you can view the DAB service information in
the following 7 information modes.
Press the FM MODE/DISPLAY button (or the DISPLAY button on the
remote control) repeatedly until your desired option appears.
Each time the FM MODE/DISPLAY button (or the DISPLAY button on the
remote control) is pressed, the information on the display change as follow:
DAB Stations Advanced Operations
1. When a station is received as described under “Automatic Tuning”,
press the SET UP/RDS MODE button (or the SET UP/REPEAT button
on the remote control).
2. Press the f or e button repeatedly to select following items you
want to see information or reset from following appearances:
Station order v Manual tune v DRC value v Language v
SW version
DLS (Dynamic Label Segments):
Displays the scrolling broadcasting text (in default setting).
Sorting Stations
By sorting stations, you can define in what order the available station are
listed when the DAB is tuned.
Program Type: Describe the station program Type.
1. When “Station order” is selected, press the SELECT/PTY CHECK/
RANDOM button (or the RANDOM/SELECT button on the remote
control).
2. Press the f or e button repeatedly to select the desired sorting
order you want to set from following list of option appearance:
Fav station v Alphanumeric v Active station v
Prune station v Fav station v ...
Multiplex Name: Specifies the multiplex of current service.
Date and Time: Shows the date and time of current multiplex broadcasting.
Currently selected
service list order.
List of options.
Fav station:Depending on the length of listening time, the unit automatically
list 10 stations you most frequently listen to in alphanumeric
order (favorite ones in the front and others at the back).
Alphanumeric: Displays all the stations in alphanumeric order.
Active station: Displays active/inactive station (active ones in the front and
others at the back).
Prune station: Remove inactive stations from the list.
3. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control) to confirm it when desired
sorting order appearance is selected, “sorting stations” setting finished
then.
-
Date and Time is up to the service providers to broadcast the time
and date relatively frequency. This will be updated every minute
approximately.
Channel and Frequency: Display the channel and control frequency of
current multiplex broadcasting.
-
-
-
Station order is changed as specified.
The last selected station continues to play.
Next time you tune the DAB, the available station are listed in the
changed order.
Bit Rate andAudio Statue: Displays the transmission rate of broadcasting
date in bits per second and display the audio status of current service in
stereo or mono.
Dynamic Range Control (DRC)
With the 3 DRC value options, you can adjust the difference in loudness
recording to your listening environment:
-
-
-
DRC 0 for outdoor use.
DRC 1/2 for in-home use.
DRC 1 for headphones use.
1. When “DRC value” is selected, press the SELECT/PTY CHECK/
RANDOM button (or the RANDOM/SELECT button on the remote
control) to confirm it.
2. Press the f or e button to select the desired DRC value.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Signal Error Rate: Indicates signal quality.
0 - 15: good;
16 - 30: Acceptable;
Over 30: Poor.
3. Press the f or e button to select the channel number to be preset.
Note:
-
Press the f or e button repeatedly to scroll the user through the
available menu option (under setup menu), service station lists.
while in the service scrolling state, press the SELECT/PTY CHECK/
RANDOM button (or the RANDOM/SELECT button on the remote
control) to select the requested service. If there is no input after 7
seconds, return to original display.
-
In this example, station “Plant Rock” is preseted in channel number 4.
4. Press and hold the MEMORY button for 2 seconds till “Preset X saved”
appears. (X –– 1~10, means the channel number you have preset in
step 3).
-
In normal display mode, press the f or e button will cause the
display scroll through the service list.
Current station is stored to the desired channel number.
scroll over
w
Note:
Using the remote control, you can press the number buttons directly.
-
If the displayed service is one of the first 10 services on the list and it
is in favourite order, as indicated by “ ”.
Example:
To select No.3, press and hold the 3 button until “Preset 3 saved” appears.
To select No.10, press and hold the 0 button until “Preset 10 saved”
appears.
Listening to preset stations
1. Press the FUNCTION button to select DAB function.
“
” appears
-
If the service has been saved to preset button, then it is indicated by
the preset number 1, 2, etc.
2. Press the MEMORY button.
preset number
-
-
If the service is not active (e.g. it is invalid), it is indicated by “?”.
If the service is a primary service and it has secondary services then
it is indicated by “>>”, and if the service is as secondary then it is
indicated by “<<”.
3. Press the f or e button to select the preset number.
4. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control) to confirm the station.
To preset DAB stations
Up to 10 station can be preset.
Note:
Automatic presetting
Using the remote control, you can press the number buttons directly.
Example:
To select No.3, press the 3 button for less than 2 seconds.
To select No.10, press the 0 button for less than 2 seconds.
Automatic programming will start from preset 1. It allows you to save your
favorite stations as presets.
1. Sort the list of available stations by Fav station order (as “Sorting
Stations” in the previous page shows).
2. Press f or e button briefly, until “ v PRESETS” appears
then press the SELECT/PTY CHECK/RANDOM button (or the
RANDOM/SELECT button on the remote control).
About DAB radio what to do if ...
In the DAB radio mode if the operation of the unit or display is not normal,
1. Press and hold the SET UP/RDS MODE button (or the SET UP/
REPEAT button on the remote control) till “press SELECT to confirm
reset...” appears.
2. Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/
SELECT button on the remote control).
-
All the favorite stations are stored in the preset locations starting from
preset number 1, overwriting the presets in the respective locations.
Manual presetting
1. Tune in the DAB station to be preset.
3. Resume the operation.
2. Press the MEMORY button.
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO OTHER SOURCES
1. Press the FUNCTION button to select “LINE”.
2. Follow the instructions supplied with the video/auxiliary equipment.
TIMER OPERATION
8. Press the
/CLOCK/TIMER button, “
OFF ” appears. The
Using the timer (Main unit only)
previous Timer OFF time appears.
Set the on and off times, and function to be used. Operation will start with
the selected function at the on time. The sound will be gradually increased
from a no-sound level to the current volume setting (fade-in).
The power will be switched off at the off time.
The timer will function every day unless it is released.
9. Repeat steps 3 - 7 above. This completes the setting of the OFF time.
Preparation
Note:
Make absolutely sure that the clock is set to the correct time and the main
unit is in power on mode before setting the timer.
-
-
Prepare the sources to be used.
-
10. Press the
/CLOCK/TIMER button. “ ” remains lit, “SOURCE”
If the function selected is tuner, tune in to the desired band and
station.
Adjust the volume level as desired.
and original preset function appears.
Example:
Waking up 7:30 every day and listening to music until 8: 15.
11. Press the MEMORY button. Preset function blinks.
1. Press the
/CLOCK/TIMER button.
The present time appears.
2. Press the
/CLOCK/TIMER button again. “ ON” appears. The
previous timer ON time appears.
12. Turn the VOLUME control to set the desired function.
CD v TUNER v DAB v LINE v ...
13. Press the MEMORY button. Desired function remains lit. “ ” remains
lit.
3. Press the MEMORY button, “ ON” and “hour” blink.
4. Turn the VOLUME control to set “hour” display.
5. Press the MEMORY button. “ ON” and “minute” blink.
6. Turn the VOLUME control to set “minutes” display.
14. Press the
disappears.
/CLOCK/TIMER button, original display appears, “
”
15. Press the
/CLOCK/TIMER button for at least 1 second to make
sure “ ENABLE” appears briefly.
16. Press the z/ON button to turn the power off. Current time displays,
” remains lit.
“
When the timer ON time arrives, the power is turned on automatically and
the unit starts playing with the preset function selected.
7. Press the MEMORY button. This completes the setting of the ON
time.
•
When the timer OFF time arrives, the power turns off and the timer is
set to the standby mode. Timer operation repeats this cycle every
day.
To check the timer settings
Turn on the power, then press the /CLOCK/TIMER button repeatedly.
The timer settings are displayed in the following order:
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
Present time.
TIMER ON time.
TIMER OFF time.
Original preset function.
Original display returns.
Using the sleep timer (Remote control only)
The sleep timer automatically switches off the power after a preset time
has elapsed. The volume will gradually be reduced (fade-out) during the
1-minute period before the unit turns off. There are 9 time periods available:
90, 80, 70, 60, 50, 40, 30, 20, and 10 minutes.
To change the timer settings
Press and hold down the SLEEP button to select the desired sleep time.
“SLEEP - ” blinks and selected time appears on the display. After several
seconds, the original display returns.
1. Turn on the power and press the
the setting to be changed.
2. Press the MEMORY button so that the display blinks.
3. Change the setting as explained above.
/CLOCK/TIMER button to select
To release the timer
Turn on the power and press the
/CLOCK/TIMER button for at least
1 second, “ CANCEL” display briefly.
To release the sleep timer while in operation
Press and hold down the SLEEP button until the “OFF” appears. The
timer is also released if the power is switched off.
To set the timer again with the same settings
1. Turn on the power and press the
least 1 second till “ ENABLE” appears briefly.
2. Press the z/ON button to switch off the power.
Note:
/CLOCK/TIMER button for at
The timer operation is released if a power failure occurs.
MAINTENANCE
Cleaning the unit
Clean the outside of the unit with a clean soft cloth, moistened with
lukewarm water. Do not use benzene, thinner or alcohol since they will
mar the finish of the surfaces.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Tuner
General
Reception frequency:
FM: 87.5 ~ 108 MHz
Output power:
50W/ch (at 6 ohms, 10% distortion)
Input:
VIDEO IN: 500 mV/50 kohms
Outputs:
SPEAKERS: 6 ohms
PHONES: 8 ~ 32 ohms
Power requirements:
AC 230V, 50 Hz
Power consumption:
68 W
CD player
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor laser
Laser output:
0.6 mW (Continuous wave max.)
Wave length:
Dimensions:
170(W) x 262(H) x 245(D) mm
Weight:
790 nm
Wow/flutter:
4.5 kg
Below measurable limits
Speaker systems
Type:
DAB section
RF section: Band III, 174 ~ 240 MHz
(UK: 218 ~ 230 MHz)
2 way bass reflex
Unit used:
Input: 50R, nominal
Woofer: 12 cm cone type
Tweeter: 2.5 cm piezoelectric
Maximum power-handling capacity:
50 W (peak)
Max signal: -3 dBm typical
Sensitivity: -96 dBm typical
Adjacent channel rejection: 35 dB typical
Nominal impedance:
6 ohms
Dimensions:
154(W) x 208(H) x 192(D) mm
Weight:
1.7 kg (per speaker)
Specifications subject to change without notice.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE TO CUSTOMER
Thank you for buying Sanyo. This equipment should give you
many years of pleasure and faithful service but in the event that a
fault occurs, the following notes for your guidance may be helpful:-
Sanyo Europe Ltd. (the Company) guarantees to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material
or workmanship the Company will, for a period of 12 calendar
months from the date of sale to the original purchaser repair or
replace, at its sole option, free of charge, any such defective
component part of the equipment, always provided that: -
1. PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL
BE REQUIRED FOR SERVICE DURING GUARANTEE.
2. If your Sanyo equipment proves faulty during the period of
guarantee, take it or send it back to the dealer who originally
supplied it together with this guarantee and the proof of purchase.
We have made arrangements with our approved dealers under
which they will carry out in-guarantee service repairs on our behalf.
In this way, we hope to reduce to a minimum the amount of time
you will be without your equipment.
3. If for some reason it is impossible to return the equipment to the
original supplies, please contact our Consumer Relations Depart-
ment at the address below for further advice.
4. Should the equipment require servicing after the expiry of the
guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation for
the repair. If you are in any doubt about what to do, write to us at
the address below or telephone:
1. The equipment has at all times been used in accordance with
the operating instructions issued by the Company, and has not
been connected to an electrical mains supply for which it has not
been adjusted.
2. Accidental damage, or damage caused by negligence or
misuse by the user, including leakage from exhausted batteries, is
specifically excluded.
3. Unauthorised repairs, or any modification to the equipment
which has not been expressly approved by the Company, shall
render this guarantee null and void.
4. Failure due to fair wear and tear of any item, such as batteries,
record playing styli, and tape recording, playback and erase heads
is specifically excluded.
Consumer Relations Department,
Sanyo Europe Ltd.,
18 Colonial Way,Watford
WD24 4PT
This guarantee is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland). Nothing in this
express guarantee affects the statutory rights available to the
purchaser of this equipment.
Tel: Watford 246363
Note: This guarantee supersedes any other form of guarantee
that may inadvertently have been enclosed with or attached to the
product. (August 1978).
R6
(UK) 1AD6P1P2087-CA
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|