Click <Wireless Network>.
Enter your camera Serial Number and click
3.
4.
5.
3.
4.
CONNECTING THE CAMERA TO YOUR ROUTER
<Check>.
Connect the power adapter to the camera.
1.
2.
3.
SNH-1011N English
Quick Start
Guide
Select <Wireless On> then select your wifi
Create a private key (Password) for the
XXXXXXXXXXXXXXX
network. If your network is hidden, select
Connect the network cable to the camera
and your network router.
camera. Use 1 to 8 alphanumeric characters.
<Other Wifi Networks>.
Enter the password for your wifi network
The camera bootup will take about 1
XXXXXXXXXXXXXXX
Create a name for the camera. I.e., Home
and click <Apply> then in the popup, click
5.
minute then the camera status LED will
change from red to green.
<OK>.
Thank you for purchasing the Samsung
SmartCam Wifi Home Security Camera.
Follow the simple steps in this guide to set
up and start using your new SmartCam.
And click <Add>.
J For proper networking to a Wi-Fi router with
using the router’s WPS function, refer to the router’s manual and the product’s
user manual available on the web page.
Disconnect the network cable from the
camera and the wireless router.
6.
Click camera icon in the camera list.
If you have any questions or need help
installing your new product please contact
our free technical support.
6.
7.
8.
XXXXXXXXXXXXXXX
SETTING UP YOUR ACCOUNT
J The subscription and camera registration explained below can be made on your
smartphone too. Refer to the “iPhone” or “Android” section of <Support> on
the product web site.
Telephone : 1-877-349-3149
J The camera status LED will flash blue then turn steady green after about 20 seconds.
You can now unplug the camera and place anywhere around the home within the WiFi
range. If it continues to flash blue, a wifi connection has not been established.
Please contact our tech support at 1-877-349-3149
9am - 9pm EST, Monday - Friday
Enter the Private Key for the camera and
Related manual can be downloaded from
click <OK>.
J If you forget your Private Key, you must reset the
camera. Refer to the full manual for details.
1.
samsungsmartcam.com.
UNPACKING
View your camera.
SETTING UP NOTIFICATIONS
You will be asked to install the web viewer
plug-in to view the video for the first time.
After installation, please restart the browser
and login again.
Select <Sign Up> to register.
2.
3.
Make sure all following items are in the packaging:
After reading the terms of use, check
YouTube
“I Agree...”, and click <Next>.
Automatically uploads 30 second clip to your private YouTube account.
Enter requested information, and click
Click the <Video> tab.
1.
<Sign Up>.
CONNECTING TO YOUR WIFI NETWORK
Click <Setup>.
1.
ADDING YOUR CAMERA
Double Sided
Tape
Screws /
Warranty Card X1 /
GPL License X1
Click the <Youtube> tab.
2.
3.
Camera
Adapter
Network Cable
Quick Guide X3
Wall anchors
samsungsmartcam.com.
1.
Click <Network Setting>.
2.
J Save the packaging for later use.
Select <Enable>.
You will need the serial number found on the side of
the packaging.
Enter your SmartCam account username
2.
and password and <Login>.
Download from Www.Somanuals.com. All Manuals Search And Download.
SNH-1011N-Quick Start Guide-ENGLISH.indd
1
2012-10-23 오후 5:44:43
|