Samsung Fax Machine SF 340 Series User Guide

P/N:JB68-00903A Rev.4.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Precautions and Safety Information  
When using this fax machine, these basic safety precautions should always be followed to reduce risk of fire,  
electric shock, and injury to persons:  
1
2
3
Read and understand all instructions.  
Use common sense whenever operating electrical appliances.  
Follow all warnings and instructions marked on the product and in the literature accompanying the  
product.  
4
5
If an operating instruction appears to conflict with safety information, heed the safety information. You  
may have misunderstood the operating instruction. If you cannot resolve the conflict, contact your sales or  
service representative for assistance.  
Unplug the fax machine from the AC wall socket and telephone jack before cleaning. Do not use liquid or  
aerosol cleaners. Use only a damp cloth for cleaning.  
6
7
Do not place the fax machine on an unstable cart, stand, or table. It may fall, causing serious damage.  
Your fax machine should never be placed on, near, or over a radiator, heater, air conditioner, or ventilation  
duct.  
8
9
Do not allow anything to rest on the power or telephone cords. Do not locate your fax machine where the  
cables may be damaged by people walking on them. Do not place the machine where the power or  
telephone cord may be bent. Any case of above may cause the hazardous result or malfunction.  
Do not overload wall outlets and extension cords. This can diminish performance, and may result in the  
risk of fire or electric shock.  
10 Do not allow pets to chew on the AC power, telephone, or PC interface cords.  
11 Never push objects of any kind into the fax machine through case or cabinet openings. They may touch  
dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind onto or into the fax  
machine.  
12 To reduce the risk of electric shock, do not disassemble the fax machine. Take it to a qualified service  
technician when repair work is required. Opening or removing covers may expose you to dangerous  
voltages or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 Unplug the machine from the telephone jack, PC, and AC wall outlet, and refer servicing to qualified  
service personnel under the following conditions:  
• When any part of the power cord, plug, or connecting cable is damaged or frayed.  
• If liquid has been spilled into the product.  
• If the product has been exposed to rain or water.  
• If the product does not operate properly after instructions have been followed.  
• If the product has been dropped, or the cabinet appears damaged.  
• If the product exhibits a sudden and distinct change in performance  
14 Adjust only those controls covered by the operating instructions. Improper adjustment of other controls  
may result in damage, and may require extensive work by a qualified service technician to restore the prod-  
uct to normal operation.  
15 Avoid using this fax machine during a lightning storm. There may be a remote risk of electric shock from  
lightning. If possible, unplug the AC power and telephone for the duration of the lightning storm.  
16 Do not install the machine on a wet place. This may raise a risk of fire or shock.  
17 SAVE THESE INSTRUCTIONS.  
18 CAUTION : For electrical safety reasons disconnect from telecommunications network before touching  
metal/conductive parts.  
19 CAUTION : To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Receiving in TAM mode (SF-345TP) ............................................................................................................... 3.6  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Message forwarding (SF-345TP only) ............................................................................................................... 5.5  
Received fax remote notifcation (SF-345TP only) ................................................................................................... 5.6  
Recording a conversation (SF-345TP only) ............................................................................................................. 6.3  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
1
SETUP AND COPYING  
This chapter describes the preliminary setup procedure. A full installation instruction is explained in the  
separate Installation Guide. If you are installing or reinstalling the machine from the beginning, refer to the  
Installation Guide provided with the machine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
List of features  
This machine was designed using the latest technology. It is a full-featured, high-performance machine that not  
only meets, but also exceeds industry standards. The following is a list of its many exciting features:  
Common features to SF-340 Series (SF-340/SF-345TP)  
• Inkjet printing on plain paper  
• 14.4Kbps high speed faxing  
• 40 page holding memory(SF-340), 100 page holding memory(SF-345TP)  
• Multilingual display and report; English, German, French, Italian, Spanish, Portuguese and Dutch (see "Language"  
• Stand-alone, full-function fax machine  
• Convenient 50 page desktop copier  
• 10 page Skew Free Document Feeder  
• 80 Speed Dialling locations (10 One-Touch included)  
1
• Five reception modes; TEL, FAX, AUTO, TAM (Telephone Answering Machine) and DRPD  
• Broadcasting to send the same document to multiple destinations  
• Delayed FAX to send the document at a later time  
• Send/Receive Polling  
• Last 10 number redial  
• Report management; sending confirmation, Journal report and Phonebook, etc  
• Receive short messages  
• Stored FAX to send the document without original document  
• My Favorites  
• Wake up Sound  
Features for SF-345TP only  
• PC printing capability  
• Compatible with the most recent operating system  
• Network sharing  
• Built-in digital TAM  
• Access from a remote telephone  
• Message Forwarding (you can have the machine transfer a call when the caller leaves a message.)  
• Call monitor  
FAX Receiving Notice ( you can know with Voice Message when the machine receives a new fax.)  
• Speaker Phone  
This printer supports only black print.  
SF-340 : Inkjet Facsimile  
SF-345TP : Inkjet Multi Function Device  
1. If your machine is an SF-340, you need to have an answering machine attached.  
1.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Familiarizing yourself with your new machine  
Take a moment to familiarise yourself with your new machine by looking at the pictures on the next few pages.  
2
Front view  
Paper Support  
Document Tray  
Paper Guide  
Dust Cover  
Handset  
Document  
Guide  
Document  
Out Tray  
Rear view  
USB Connector  
(SF-345TP Only)  
AC Power Socket  
Connect extension phone  
or TAM here, if applicable.  
(SF-340 Only)  
2. Note that all of illustrations on this User Guide are from SF-345TP, so some parts may be different from your machine.  
1.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Control Panel  
Speed  
Button name  
Function  
Ink Save  
Used for less ink consumption. It toggles On and Off.  
Used when you want to turn off all sounds made by the machine.  
Used to store the document used frequently and send it conveniently.  
Used to install a new cartridge or replace an old one.  
Silent  
My Favorites  
Cartridge Change  
Resolution  
Improves the clarity of a document you are sending.  
Rcv.Mode/Darkness  
This button has two functions:  
When no document is loaded, pressing this button changes the Receive  
Mode.  
When a document is loaded, the pressing this button changes the contrast.  
OGM (SF-345TP only)  
Play/Record (SF-345TP only)  
Erase (SF-345TP only)  
TAM (SF-345TP only)  
Used to record or play the outgoing message used in TAM Mode.  
Plays incoming messages. Used to record a phone conversation.  
Used to erase a message or all messages.  
Switches the TAM mode on/off. It lights when in TAM Mode and blinks  
when a new message is received.  
(SF-345TP only)  
(SF-345TP only)  
Number keypad  
Used to repeat the current message, or to skip back to the previous one.  
Used to skip forward to the next message.  
Dial numbers manually as you would usually do with the telephone, or  
enter letters while setting up your machine.  
Symbols  
Speed  
Used to enter special characters when entering a name in edit mode.  
Used to store and dial the most frequently used 80 telephone/fax numbers  
with two-digit location number.  
Recall (R/Flash)  
Redial/Pause  
Performs a switch-hook operation.  
Used to redial the last number called. You can also use it to add a pause  
while storing a number in memory.  
Phone Book/Mute  
To mute the phone while you are speaking via the microphone. To search  
for a number in memory.  
a
Used to speak without picking up the handset (SF-345TP only), or dial  
numbers.  
Speaker Phone (or On Hook Dial)  
Menu  
Used to choose special functions such as system setup and maintenance,  
etc.  
1.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Button name  
Scroll/Volume  
Function  
Used to display the previous or next menu item, to adjust the volume, or to  
move the cursor to the digit you want to edit.  
Enter  
Used to activate the selection shown in the display.  
Used to return to the previous menu level.  
Used to copy a document.  
Upper Level  
Start Copy  
Start Fax  
Used to start a job.  
Stop/Clear  
Stops an operation at any time. Or used to delete digits in the edit mode.  
a.Speaker Phone : SF-345TP only  
On Hook Dial : SF-340 only  
Loading paper  
To receive faxes or make copies, you should load the paper in the ASF3. You can load approximately 50 sheets  
of paper. Before loading the paper, see if the paper size is set correctly in the System Setup.  
1
2
3
Flip the Paper Support open.  
Paper Support  
Dust Cover  
Pull the Dust Cover toward you.  
Fan the papers and insert them into the ASF  
with the print side face up.  
Paper Guide  
4
5
Squeeze the Paper Guide, and move it to the  
right to match the width of the paper.  
When completed, replace the Dust Cover to  
its original position.  
Paper type and sizes  
Satisfactory print and receive quality can be obtained with many types of plain paper. Since the quality of plain  
paper varies widely, test the print quality before buying large quantities of paper. Your machine uses a variety of  
papers including:  
• Xerographic paper  
• Bond paper  
• Dual-purpose paper  
Because all paper varies in physical characteristics, you can receive mixed results from different packages of  
paper even though the packages contain the same type of paper. If you encounter undesirable results, try the  
other side of the paper, a different type, or another package of the same kind of paper.  
DO NOT use the following types of paper with your machine:  
• Continuous form feed paper  
• Synthetic paper  
• Thermal paper  
• Multi-sheet forms and documents  
• Chemically treated paper  
• Papers with raised, embossed lettering  
3. Automatic Sheet Feeder.  
1.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
The following print media can be used with your machine:  
Paper size  
Dimensions  
Paper weight  
A4  
210mm x 297mm (8.3” x 11.7”)  
216mm x 279mm (8.5” x 11.0”)  
216mm x 356mm (8.5” x 14.0”)  
2
70 ~ 90g/m  
Letter  
Legal  
(20 ~ 24lbs)  
Making a copy  
If you want to save ink while copying or receiving a fax, see "Copying/receiving in Ink Save mode" on page 1.8.  
1
2
3
4
Turn the page face down and insert it into the document feeder.  
Adjust the document guide to match the width of the document.  
Feed the document into the machine.  
Document  
Guide  
Adjust the resolution by pressing Resolution.  
• In case you selected the Standard, it automatically changes to Fine  
mode.  
5
6
Press Start Copy.  
• The display shows Number of Copies  
.
Enter the number of copies you want, and press Enter.  
• The display shows Zoom Rate  
.
• If you want one copy without specific copy options, you can press Start Copy again at this time, and copying will  
start immediately.  
7
8
9
Select the zoom rate you want by pressing < or >, and then press Enter.  
• You can scale the document from 50% to 150% by selecting a pre-defined rate. The default rate is 97%.  
Choose if you want to collate document.  
• When collation is selected, you need to select the sorting order; Normal, Reverse.  
Press Enter when all options have been selected.  
• When the machine runs out of paper, Load paper and press Enter appears in the display. Supply additional paper and press  
Enter  
.
Setting date and time  
The current date and time are shown in the display when the machine is on and ready for use (Standby Mode).  
The date and time will be printed on all faxes you send.  
1
2
3
4
Press Menu.  
Press < or > to choose SET DATE & TIME and press Enter.  
Press Enter when the display shows Date Format.  
Press < or > to select either Europe(D-M-Y) or USA(M-D-Y) and press Enter.  
1.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
5
6
Press Enter when the display shows Date & Time.  
Set the date and time. You can move the cursor by pressing < or >.  
• If you enter an invalid number, the machine beeps and doesnt proceed to the next step. If this happens, just re-enter  
the correct number.  
• When entering the hour, you should enter it in 24-hour format.  
7
Press Enter when the date and time appear correctly.  
• The display shows the date and time you have set, then returns to Standby Mode.  
Setting fax number/name  
If this option is not selectable even though you followed the described steps, you have to consult the service technician or  
your dealer.  
This is very useful information for the recipient. It allows them to see who sent a fax and what number they  
should send a response to.  
1
2
3
4
Press Menu.  
Press < or > to choose SET SYSTEM ID and press Enter.  
Press Enter when the display shows Fax Number.  
Enter the fax number to which your machine is connected.  
• You can enter up to 20 digits, and include special characters (space, plus sign, etc.)  
• To enter a delimiter, press #.  
• To enter plus symbol (+), press *.  
• If you enter a wrong number, use < or > to move to the number and correct it.  
5
6
7
Press Enter when finished.  
Press Enter when the display shows Fax Name.  
Enter the fax name (up to 40 characters) by using the number keypad.  
• You can include special characters (space, plus sign, etc.).  
8
Press Enter when the name in the display is correct.  
• The machine returns to Standby Mode when you have finished or when Stop/Clear has been pressed.  
How to enter letters  
These instructions assume that the display is asking you to enter a name.  
1
2
3
Press the appropriate button for the letter you want.  
To enter an O, for example, press the 6 button three times. Each time you press the button, the display shows a  
different letter: first M, then N, an O, and finally 6.  
• For a list of letters and corresponding buttons, see "Keypad character assignments" on page 1.8.  
Select the next letter in the same way.  
• The blinking cursor moves right and the next letter appears in the display.  
• If the letter is assigned to the same button you have pressed in step 1, then first move the cursor by pressing < or >,  
then press the button.  
Press Enter when you’re finished entering letters.  
1.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Keypad character assignments  
Assigned numbers, letters, or  
characters  
Assigned numbers, letters, or  
characters  
Key  
Key  
1
2
3
4
5
(Space) 1  
6
M
P
N
O
6
A
D
G
J
B
E
H
C
F
I
2
7
Q
R
S
7
3
8
T
U
V
8
4
5
9
W
X
Y
Z
9
K
L
0 (Symbols)  
+ - , . ’ / * # & 0  
Copying/receiving in Ink Save mode  
Your machine has an Ink Save mode to optimize consumption of ink when copying and receiving a fax.  
Press Ink Save.  
• The button backlights to indicate Ink Save mode is active. From now on, every printout except reports will consume  
less ink.  
• If you feel the print quality is not good enough, exit the Ink Save mode by pressing the Ink Save button again and  
print quality will return to normal mode.  
Adjusting ring volume  
Your machine has several levels of ring volume. Adjust it as you prefer.  
Press Scroll/Volume with machine in standby.  
• Whenever you press the button, different ring is ringing.  
• The volume indicates that the machine will not ring when the call is received.  
0
Adjusting speaker volume  
When you are speaking via the speaker phone, you can adjust the volume as you follows:  
1
2
Press Speaker Phone (or On Hook Dial).  
• You can adjust it when you are talking as well.  
Press Scroll/Volume as many times as you want.  
• Whenever you press the button, it will increase or decrease the volume.  
1.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
CHAPTER  
2
PROGRAMMING AND DIALLING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making a phone call  
Your new machine provides many ways for making a phone call. You can use either of following:  
• On-Hook dialling  
• Phonebook dialling (One-Touch and Speed dial)  
• Directory dialling  
• redialling  
• manual dialling via the handset as you do with a regular telephone  
On-Hook dialling  
You do not need to pick up the handset to make a phone call. When dialling, just press the Speaker Phone (or On  
Hook Dial) button and enter the numbers. Depending on your machine, you need to pick up the handset or keep  
speaking through the microphone.  
If you have an SF-340  
• You have to pick up the handset to speak after the call is answered.  
• If you want to share the conversation with somebody beside you, pick up the handset and press On Hook Dial  
The line is still connected and everybody can listen to the conversation.  
This is called a 1-way conversation.  
.
• While you are using 1-way conversation, do not place the handset beside the speaker, as this may result in howling.  
If you have an SF-345TP  
• You do not need to pick up the handset. Speak into the microphone on the Control Panel when the call is answered.  
Phonebook dialling  
There are two types of Phonebook dialling; One-Touch and Speed dial. The way to programme numbers into  
memory is the same for both but how you dial stored numbers is different. To One-Touch dial, you just press and  
hold a number (0~9) on the keypad and the number will be dialled. To Speed dial, you need to first press the  
Speed button and then the two-digit location number.  
Phonebook dialling provides you with quick access to your most frequently used numbers. Before using  
Phonebook dialling, you must first programme the numbers into the memory.  
Storing a number in the Phonebook  
1
2
3
Press and hold the Speed button for about two seconds.  
• The display shows Speed [00-80]>##  
.
Enter a two-digit (00~80) number and press Enter.  
• From 00 to 09 will be used for One-Touch dialling, and from 10 to 80 for Speed dialling.  
Enter the telephone/fax number you want to store (up to 40 digits) and press Enter.  
• If you want a pause between numbers, press Redial/Pause; a ‘P’ appears in the display.  
• If you make a mistake while entering a number, use < or > to move the cursor under the digit, then enter the correct  
digit.  
2.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
4
5
Enter the name and press Enter.  
• If you do not want a name, just skip this step by pressing Enter. If you have subscribed to a Caller ID service,  
it is recommended you enter a name.  
• You can assign up to 20 characters to a name. see "How to enter letters" on page 1.7.  
Press Stop/Clear to exit.  
One-Touch dialling  
1
Place document(s) if you are sending a fax.  
2
Press and hold one of the number keypad. (0 through 9)  
• The display briefly shows the name or number and the number is then automatically dialled. You hear the dialling  
process through the speaker.  
• When the remote fax machine answers, the machine scans the document into memory and begins to transmit if a  
document is loaded in the document feeder.  
• To send a fax directly without scanning into memory, turn off the Send From Memory option. (see "Send From Memory"  
• You can refer to the number assigned to each location by printing the Phonebook. see "To print a report" on page 6.4.  
• Regardless of the setting of the Send From Memory option, the machine will first dial and then send a fax if you set the  
resolution to Super Fine.  
Speed dialling  
1
2
3
Press Speed.  
Enter a two-digit speed dial location number.  
Press Enter to dial the number.  
• The display briefly shows the name or number and the number is then automatically dialled. You hear the dialling  
process through the speaker.  
• When the remote fax machine answers, the machine scans the document into memory and begins to transmit if a  
document is loaded in the document feeder.  
• To send a fax directly without scanning into memory, turn off the Send From Memory option (see "Send From Memory"  
• You can refer to the number assigned to each location by printing the Phonebook. see "To print a report" on page 6.4.  
• Regardless of the setting of the Send From Memory option, the machine will first dial and then send a fax if you set the  
resolution to Super Fine.  
Searching for a number in memory (Directory dialling)  
You can search the entire Phonebook to find the number you want to dial.  
Searching sequentially through the Phonebook  
1
Press Phone Book/Mute.  
2
Press < or > to move upward or downward through the directory until you find the number you want.  
• Pressing > allows you to search downward through the entire Phonebook by incremental order of location number,  
and < allows you to search upward in decreasing order.  
3
When the number you want appears in the display, press Start Fax to dial.  
2.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
Searching for a particular first letter  
1
Press Phone Book/Mute.  
2
Press the button labelled with the letter you want to search for.  
• For example, if you want to find the name ‘NEW YORK’, press the ‘6’ button, which is labelled with ‘MNO’.  
• The machine finds the closest entry so you may need to specify as clearly as you can.  
• If the machine cannot find a name that begins with the given letter, the machine shows the message Not Found  
.
3
When the name and number you want appears correctly in the display, press Start Fax to dial.  
Redialling  
You can redial the number last called or one of ten unique numbers recently stored in memory.  
To redial the last number called  
1
2
Press Redial/Pause.  
• The number is dialled automatically.  
• If a document is loaded, the machine automatically begins to send. If there is no number stored, the machine will  
beep.  
Speak into the microphone when the call is answered.  
• Pick up the handset, if you are an SF-340 user.  
To redial the number in memory  
1
Press and hold Redial/Pause for about two seconds.  
2
Select Recent Numbers and press Start Fax.  
• The display shows the most recent numbers.  
3
4
Press < or > to find the number you are dialling.  
Press Start Fax when the correct number appears.  
• If a document is loaded, the machine automatically begins to send.  
To find a number received via the Caller ID service  
You sometimes need to see who has called you. To see the number or name follow the instructions below:  
1
2
3
Press and hold Redial/Pause for about two seconds.  
Select Caller ID and press Enter.  
Scroll through the numbers by pressing < or >.  
• The Caller ID displays in two ways. One is by name and other is by number. If the number is the same as the one you  
saved to a One-Touch or Speed dial location and you assigned a name to that location, the machine shows the name  
instead of the number.  
2.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
CHAPTER  
3
THE FAX MACHINE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sending a fax  
Sending a fax is very simple if you follow the instructions starting from here. They will describe how to load the  
document, set the resolution/contrast and dial the number.  
Loading documents  
1
Load your document(s) top down in the document tray with the printed side facing away from you.  
• Be sure that your document is dry and free of staples, paper clips, and other foreign objects.  
• For more information on what kind of paper you can use for documents, see "Acceptable documents" on page 3.2.  
2
Adjust the document guides to match the width of the docu-  
ment, and load document consisting of up to 10 sheets until the  
Automatic Document Feeder seizes and pulls it in. The display  
Document  
Guide  
will indicate Document Ready when it senses that a document has  
been loaded.  
• If you are sending more than one sheet, make sure the bottom sheet  
enters first. Insert the sheets with a slight push to ensure smooth feed-  
ing.  
• If you’re loading pages that are unusually thick or thin, feed one sheet at a time. If the document doesnt feed cor-  
rectly, open the Control Panel, remove the document, and try loading it again.  
3
Choose the proper resolution and contrast by pressing Rcv.Mode/Darkness and Resolution respectively.  
Acceptable documents  
Single sheet  
2 or more sheets  
a
Document size  
Max  
Min.  
216mm (W) x 297mm (L)  
216mm (W) x 356mm (L)  
148mm (W) x 128mm (L)  
210mm  
Effective scanning width  
Number of sheets which can be loaded at a time  
Thickness of document  
-
Up to 10  
0.07mm ~ 0.15mm  
0.075mm ~ 0.12mm  
Paper quality  
Uncoated on both sides  
a.When sending a document that is longer than A4 in size, you must immediately take out each sheet as soon as it has been  
scanned. Otherwise, the document may jam.  
For multiple sheets, all pages of the document must be the same size and paper type.  
DO NOT try to send documents that are:  
• wet  
• covered with wet ink or paste  
• wrinkled, curled, or folded  
• too thin (less than 0.07mm thick-onionskin, airmail paper, etc.)  
• too thick (more than 0.15mm thick)  
• chemically processed (pressure-sensitive paper, carbon-coated paper, etc.)  
• coated (glossy, etc.)  
• too small or short (such as a label, voucher, etc.)  
• made of cloth or metal  
To send these documents, use an office copier to make a photocopy first, and then send the copy.  
3.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Setting document resolution and contrast  
We recommend you send documents printed using a typewriter, felt tip pen, black ink, or LaserWriter. The paper  
should be white or very light, and of normal weight not cardboard.  
Blue lines on a ruled pad don’t fax well. For more information on what kind of paper you can use for documents,  
see "Paper type and sizes" on page 1.5. When you send/copy normal documents, you need not adjust the  
resolution and the contrast.  
If you send/copy documents with unusual contrast characteristics, including photographs, you can adjust the  
resolution and contrast to send a high-quality transmission of the documents.  
To adjust the resolution and contrast  
1
Turn the page face down and insert it into the document feeder.  
2
Press Resolution as many times as you want to adjust the sharpness and clarity.  
• STANDARD works well for printed or typewritten originals with normal-sized characters.  
• FINE is good for documents containing a lot of detail.  
• SUPER FINE works well for documents containing extremely fine detail. SUPER FINE only works if the remote  
machine also has the SUPER FINE feature.  
• SUPER FINE mode is not used when sending documents scanned into memory (i.e. Smart Sending, Broadcasting and  
Delayed Fax).  
• If you are sending document by using memory (broadcasting, delayed tx, for example), SUPER FINE will be changed  
back to FINE even though you selected SUPER FINE.  
3
Press Rcv.Mode/Darkness as many times as you want to adjust the darkness.  
• NORMAL works well for normal handwritten, typed, or printed documents.  
• LIGHTEN works with very dark print.  
• DARKEN works with light print or faint pencil markings.  
• PHOTO is used when faxing photographs or other documents containing color or gray shades.  
When Photo is chosen, the resolution is automatically set to FINE.  
• When sending/copying is executed, resolution/contrast automatically returns to default.  
Sending a fax manually  
1
Turn the page face down and insert it into the document feeder.  
2
3
4
5
Pick up the handset or press Speaker Phone (or On Hook Dial).  
Enter the number of the remote fax machine by using the number keypad.  
Press Start Fax when you hear the fax tone.  
Replace the handset.  
Sending a fax automatically  
To send a fax automatically, you must have already stored numbers into Speed Dial locations. To learn how to  
register One-Touch Dial or Speed Dial, see "Storing a number in the Phonebook" on page 2.2.  
1
Turn the page face down and insert it into the document feeder.  
2
Enter the One-Touch or Speed Dial location.  
If you are using the Speed Dial, you have to press Enter.  
• The machine scans the document into memory and begins to transmit. If you turned off the Send From Memory option,  
the machine will first dial and send.  
• You can set your machine to print out a Sending Confirm automatically. For more information, see "Sending Con-  
3.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
Automatic redial  
When you send a fax, if the number you have dialled is busy or there is no answer, the machine will attempt to  
redial the number every three minutes up to two times.  
Before redialling, the display shows To redial now, press Start Fax.  
If you want to redial the number immediately, press Start Fax.  
Or, press Stop/Clear to cancel redialling and then the machine returns to Standby Mode.  
Receiving a fax  
Before you receive a fax, be sure to load one of the supported paper sizes for receiving faxes. For information on  
what paper types you can use, see "Paper type and sizes" on page 1.5.  
Reception modes  
Your fax machine has various reception modes; FAX, TEL, AUTO, TAM and DRPD. For DRPD Mode, see  
"DRPD Mode" on page 6.10. first. If you are an SF-345TP user, you have to press the TAM button to select TAM  
mode. Do not press the Rcv.Mode/Darkness button. You can change the reception mode by pressing  
Rcv.Mode/Darkness when no document is loaded. The following chart describes how each reception mode works:  
Reception  
mode  
Your model  
All  
How it works  
Reference section  
FAX  
The machine answers an incoming call and immediately  
goes into receive mode, expecting a fax to be received.  
TEL  
The automatic fax reception is turned off. You can receive a Receiving in TEL mode  
fax only by manually pressing Start Fax on page 3.5.  
.
AUTO  
Your fax machine will answer faxes automatically after the Receiving in AUTO mode  
number of rings you specify. If the machine does not pick up on page 3.5.  
a fax signal, it will give another ringing tone to tell you it is a  
phone call. You should lift the handset to answer the call. If  
you do not pick up the handset on your fax machine, it will  
switch to the automatic reception mode.  
TAM  
SF-345TP Your machine plays a greeting message to callers, and then Receiving in TAM mode  
the caller can leave an incoming message on your machine  
as well as a fax.  
SF-340  
You have to have an answering machine attached to the EXT Receiving in TAM mode  
line socket on your fax machine. When the phone rings, the on page 3.5.  
attached answering machine answers and stores the caller’s  
message if they leave one. If your machine senses a fax tone  
on the line, the call automatically switches over to fax  
receive mode.  
If you rarely use the fax line for voice conversation, set the machine to receive faxes automatically by selecting  
either FAX or AUTO Mode.  
3.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Receiving in FAX mode  
To set the machine to FAX Mode, press Rcv.Mode/Darkness repeatedly until Fax Mode is displayed.  
• In Standby Mode, FAX appears in the right hand corner of the display.  
• When you get a call, the machine answers after the second ring, and receives the fax automatically. When reception is  
complete, the machine returns to Standby Mode.  
• If you want to change the ‘Rings to Answer’ option, see "Rings To Answer" on page 6.9.  
Receiving in TEL mode  
To set the machine to TEL Mode, press Rcv.Mode/Darkness repeatedly until Tel Mode is displayed.  
In Standby Mode, TEL appears in the right hand corner of the display.  
1
Pick up the handset and answer it when the telephone rings.  
If your machine is an SF-345TP, and you do not answer the call within pre-defined rings4, the TAM OGM  
will be played.  
2
3
Press Start Fax if you hear a fax tone, or if the person on the other end asks you to receive a document. Be  
sure there is no document loaded, or the document will be sent to the caller’s fax showing ‘Send’ in the  
display.  
Hang up the handset.  
Receiving in AUTO mode  
To set the machine to AUTO Mode, press Rcv.Mode/Darkness repeatedly until Auto Mode is displayed.  
• In Standby Mode, AUTO appears in the right hand corner of the display.  
• When a call comes in, the machine answers it. If a fax is being received, the machine goes into receive mode. If the  
machine does not sense a fax signal, it will continue ringing to tell you it is a phone call. You should pick up the  
handset to answer the call, or it will switch to automatic reception mode, after approximately 25 seconds.  
Receiving in TAM mode  
To use this receiving mode, you need to have an answering machine attached. To set the machine to TAM Mode,  
press Rcv.Mode/Darkness repeatedly until TAM MODE is displayed.  
In Standby Mode, TAM appears in the right hand corner of the display.  
• When a call comes in, the answering machine answers and stores the callers message if they leave one. If the  
machine detects a fax signal, it goes into receive mode.  
• If you have set your machine to TAM Mode and your answering machine is switched off, or the answering machine is  
not connected to your fax machine, the machine will automatically go into receive mode after several rings.  
• If your answering machine has a ‘User-Selectable Ring Counter’, set the machine to answer an incoming call in less  
than 4 rings.  
• If the sound level of the call is too low due to a poor phone connection, the fax machine or answering machine may  
not work properly.  
• When you set the machine to TEL Mode and you have an answering machine attached, you must make sure you  
switch off the answering machine, or, the outgoing message will interrupt your phone conversation. Not all  
answering machines will work with your fax machine.  
• When your answering machine answers an incoming call, it records a fax tone until it realizes it is a fax coming  
through. Due to this, your answering machine may tell you a voice message has been left, even when it is actually a  
fax.  
4. UK: 20, other countries: 13  
3.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Receiving in TAM mode (SF-345TP)  
If you are an SF-345TP user, you have to activate/deactivate the TAM Mode by pressing the TAM button, not by  
Rcv.Mode/Darkness. Once you press TAM to turn TAM Mode on, the machine returns to Standby Mode after play-  
ing the message back. TAM appears in the right hand corner of the display and the TAM button lights.  
• When you get a call, the machine answers the call with the TAM greeting message.  
• The machine records the callers message. If a fax tone is sensed, the machine goes into receive mode.  
• Anytime the greeting message is playing, or an incoming message is being recorded, you can talk to the other  
person by picking up the handset. If the memory becomes full while recording, your machine beeps a warning and  
disconnects the line. The machine will not function as an answering machine unless you make space by erasing  
unwanted recorded messages.  
• If there is a power failure while recording a callers message, it will not be recorded.  
• When you want to talk to a caller on another telephone on the same line while recording an incoming message (ICM),  
lift its handset and press ‘#’ (hash) and ‘* ’ (asterisk).  
Receiving in DRPD mode  
DRPD stands for Distinctive Ring Pattern Detection, which is a telephone company service. It enables a user to  
use a single telephone line to answer several different telephone numbers. To receive a fax in DRPD mode, you  
should first set DRPD and activate it. Once you have activated DRPD mode it can be one of the receiving modes  
which can be selectable by pressing the Rcv.Mode/Darkness button as FAX, TEL and AUTO. To set up DRPD,  
Press Rcv.Mode/Darkness repeatedly until DRPD Mode appears in the display.  
• Now, the machine will manage faxes and call as programmed.  
• In Standby Mode, DRPD appears in the right hand corner of the display.  
DRPD must be set up again if you reassign your fax number, or connect the machine to another telephone line. After DRPD  
has been set up, call your fax number again to verify that the machine answers with a fax tone, then have a call placed to a  
different number assigned to that same line to be sure the machine answers the normal phone call.  
Receiving via an extension telephone  
If you have an extension phone connected to your machine, you can remotely control your fax machine to start  
receiving.  
1
2
Answer the call on the extension phone.  
Press *9* (remote receive start code) in sequence when you hear a fax tone.  
• Your fax machine detects the code and starts to receive the document.  
• The code is preset at the factory. The first and the last asterisks are fixed, but you can change the middle digit to  
3
Hang up the phone when your fax machine starts to receive.  
3.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
CHAPTER  
4
THE ANSWERING MACHINE  
This chapter is only for SF-345TP users. If your machine is SF-340, please refer to the User’s Guide sup-  
plied by the answering machine manufacturer.  
In this chapter, you will learn how to check your TAM greeting message, monitor incoming calls, play/erase  
messages, and access your machine from a remote telephone. All the instructions in this chapter assume that  
your fax machine is set to TAM Mode. The SF-345TP uses electronic memory as a recording medium.  
Recording time is dependent on the content of the message. The total recording time (TAM OGM + ICM) is  
about 15 minutes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Recording your TAM message  
The TAM message is an outgoing message (OGM) which plays whenever a call comes in and the machine is in  
TAM Mode. For more information about reception modes, see "Receiving in TAM mode (SF-345TP)" on  
1
2
Press and hold OGM until you hear a beep.  
Speak into the microphone on the Control Panel within 30cm range from the time you see Record in the dis-  
play.  
• You can record a message which lasts up to 20 seconds.  
• You are advised to record a message of less than 15 seconds in duration to prevent the incoming faxes from  
malfunctioning due to a long message.  
• Press Stop/Clear or OGM if you want to stop recording before the time is up.  
• After the message has been recorded, the machine briefly displays the date and time when the message was recorded.  
Then, it displays the elapsed time as the message plays back automatically.  
Checking your TAM message  
The TAM message plays back when your machine is in TAM Mode and receives a call.  
Press OGM.  
• The display shows the time when the message was recorded. The display then counts down the seconds as the  
message is playing back.  
Monitoring an incoming call  
Call Monitoring is useful for screening calls in case you do not want to be disturbed by the person calling. To use  
this feature, you have to first set Call Monitoring ON through the TAM Options. To learn how to set this  
1
When the call monitor option is on and an incoming message is being recorded, you hear the caller’s voice  
through the speaker.  
2
Lift the handset to speak to the caller.  
• The machine stops recording the callers message and you can speak directly to the caller.  
• If there is a power failure while recording a callers message, it will not be recorded.  
4.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Playing back messages  
When there are messages waiting to be heard, the TAM button flashes and the display shows that you have new  
messages, for example, New: 1 ICM: 3. (‘New: 1’ indicates there’s one new message, and ‘ICM: 3’ says that there are  
three incoming messages recorded in total.)  
Playing back newly received caller messages  
Simply press Play/Record.  
• The machine briefly displays recorded time then starts to play the message. This procedure is repeated for all NEW  
messages.  
• When the display reads 50s(01/03), ‘01’ is the number of the caller message currently being played and ‘03’ is the total  
number of new caller messages in memory. ‘50s’ is the play back time for the message currently playing. This time  
counts down as the message plays back.  
Playing back all messages  
Press and hold Play/Record until you hear a beep.  
• All the messages are played back. The display briefly shows recorded time of each message, then plays ALL the  
messages recorded.  
• When the display reads 50s(01/03), ‘01’ is the number of the caller message currently being played and ‘03’ is the total  
number of caller messages in memory. ‘50s’ is the play back time for the message currently playing. This time counts  
down as the message plays back.  
• Press Stop/Clear or Play/Record to stop before the last message. While the message is playing back, the display  
shows a variety of useful information.  
Skipping backward or forward  
To skip backward  
Press |<<(1) while listening to the message.  
• If you press |<<(1) while playing back the message, the machine will replay it.  
• The machine skips back to the previous message and plays it if you press |<<(1) twice.  
To skip forward  
Press >>|(3) while listening to a message.  
• The machine skips forward to the next message and plays it.  
• If you press >>|(3) while playing the last message, the machine beeps and returns to the Standby Mode.  
4.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Erasing old messages you’ve heard  
The memory of your machine fills up as messages are recorded. Make room for new messages by erasing old  
messages that you have already listened to. If the memory becomes full while recording, your machine beeps a  
warning and disconnects the line. The machine will not function as an answering machine unless you make  
space by erasing unwanted recorded messages. This is why you should erase old messages.  
To erase a selected message  
Press Erase while the message is playing.  
• BE CAREFUL! Once you have pressed Erase while a message is playing, theres no way to cancel or recover it.  
• The selected message is erased and Erasing is displayed.  
To erase all recorded messages  
1
Press Erase. The display asks if you want to erase ALL messages.  
2
Press Enter if you’re sure.  
• All messages in memory are erased while Erasing is displayed.  
• If you do not want to erase all messages, press Stop/Clear when asked and the machine returns to Standby Mode.  
4.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the answering machine from a remote phone  
You don’t need to be at the machine’s Control Panel to operate the answering machine. If you have access to a  
Touch-Tone phone, you can operate many features, such as message playback, regardless of where you are.  
To operate your machine from a remote phone, you need to enter a five-character: Remote Password. The  
Remote Password is preset at the factory to ‘#139#’ and you can change the password to any number you want,  
Accessing the machine  
1
Place a call to your fax machine from a Touch-Tone phone.  
2
Enter your Remote Password when the machine answers with the greeting.  
• When the correct password is recognized by the machine, you will hear two short beeps (the confirmation tone).  
3
4
Enter the Remote Command corresponding to the operation within 15 seconds.  
• When the specified operation is complete, you hear a short beep. You can then enter another command for another  
operation. If you enter a remote code while the machine is responding to your command, the unit stops the current  
operation and performs new operation. For the Remote Commands, see "Using remote commands" on page 4.5.  
Press #0 to finish the remote session.  
If you don’t enter ‘#0’, your machine might not hang up for several minutes.  
Using remote commands  
The chart below describes which Remote Code you have to enter for remote operation:  
Code;  
Operation;  
#0  
#1  
#2  
Exits remote control mode.  
Skips a message backward. The machine skips the current message and plays the previous one.  
Plays back new messages. The machine beeps and plays all new messages. If there are no new  
messages, the machine beeps four times and waits for another command to be entered.  
#3  
#4  
Skips a message forward. The machine skips the current message and plays the next one.  
Changes the TAM message. After entering the command, speak into the handset. When you finish,  
press #. If you run out of recording time, the machine stops and plays back the message.  
#5  
Plays back messages. The machine beeps and plays messages one by one. When a message is  
played back, the machine waits for another command. To listen to next message, press * within 15  
seconds. If there are no messages, the machine beeps four times and waits for another command to  
be entered.  
#6  
Changes the Paging OGM message. The machine beeps and is ready to record new message.  
Speak into the handset. When you finish, press #.  
#7  
#8  
Erases the message currently playing, and plays back the next message.  
Turns TAM Mode on/off. The machine plays the greeting message when TAM Mode is turned on.  
Each time you press #8 thereafter, TAM mode is turned off, then back on.  
#9  
*
Erases all the messages.  
Plays the next ICM message if you entered the #5 or #2 command.  
#*  
Exits the fax machine from answering mode. This code is used at a phone extension connected to  
the same line as your fax machine  
4.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
4.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
5
ADVANCED FAX  
In this chapter, you will learn how to use the advanced fax features of your machine. For example, how to  
send the same documents to many different locations (Broadcasting) or how to set up your machine to send  
faxes at a preset time (Delayed Fax).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Broadcasting  
With Broadcasting you can programme your machine to automatically scan and send documents to a number of  
different recipients. The documents are automatically erased from memory when Broadcasting is finished.  
1
2
3
4
5
Turn the document face down and feed it into the machine.  
Press Menu.  
Press < or > to choose ADVANCED FAX and press Enter.  
Select Set Broadcasting by pressing < or >, and press Enter.  
Enter the fax number.  
• You can enter a One-Touch or Speed Dial location number, which consists of two digits.  
• You can enter 5 fax numbers into one job.  
6
7
Press Enter when the correct number appears in the display.  
• If you have more destinations, select ‘ ’ and press Enter when asked Another? Y/N and repeat steps from 5.  
Y
• If you have finished entering all the numbers, answer ‘N’ and press Enter.  
Press Start Fax.  
• The document will be scanned into memory before transmission.  
Delayed fax  
You can set your machine to send a fax at a later time when you will not be present. Normally it is cheaper to  
send a fax at night because telephone rates are lower than they are during the day.  
1
2
3
4
Turn the document face down and feed it into the machine.  
Press Menu repeatedly until ADVANCED FAX appears, and press Enter.  
Select Set Delayed Fax by pressing < or >, and press Enter.  
Enter the fax number.  
• You can enter a One-Touch or Speed Dial location number, which consists of two digits.  
• You can enter 5 fax numbers into one job.  
5
6
Press Enter when the number appears in the display.  
• If you have more destinations, select ‘  
• If you have finished entering all the numbers, answer ‘  
Y
’ and press Enter when asked Another? Y/N and repeat steps from 5.  
’ and press Enter  
N
.
Enter the name if you want to name the transmission.  
If not, skip this step.  
7
8
Press Enter.  
Enter the time the transmission starts, in 24-hour format.  
• For example, Enter 2230 for 10:30 P.M.  
9
Press Enter when the time appears correctly in the display.  
• The document will be scanned into memory before transmission, and be sent at programmed time.  
5.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Using My Favorites  
My Favorites enables you to store documents that are frequently faxed and send them to selected fax numbers  
without the originals. Store a document into memory and give the document an ID name. When you use this fea-  
ture, set contrast to PHOTO by pressing Rcv.Mode/Darkness is not supported.  
Saving documents  
1
2
3
Turn the document face down and feed it into the machine.  
Press My Favorites repeatedly and press Enter when Save appears.  
Enter the document ID name(upto /15 characters/ by using the number keypad)  
• The document will be scanned into memory.  
• It shows “Exceeded Job Memory” message, when you save more than three My Favorites  
.
Deleting stored documents  
1
2
3
Press My Favorites repeatedly and press Enter when Delete appears.  
You can select one or all to delete the stored documents.  
Select the document to deleted by pressing < or >, and when the correct document ID is displayed, Press  
Enter.  
• The document will be deleted.  
Sending stored documents  
1
Press My Favorites repeatedly and press Enter when Send appears.  
2
Select the document to be sent by pressing < or >, and when the correct document ID is displayed, Press  
Enter.  
3
4
Enter the fax number.  
Press Enter when the correct number appears on the display.  
• If you have more destinations, select ‘Y’ and press Enter when asked Another? Y/N and repeat from step 3.  
Printing stored documents  
1
Press My Favorites repeatedly and press Enter when Print appears.  
2
Select the document to be printed by pressing < or >, you can select one or all to printout the stored  
document and when the correct document ID is displayed, press Enter.  
• The document will be printed.  
5.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Polling  
Polling enables you (or a remote fax machine) to retrieve a document. This is useful when a person who has a  
document to be sent is leaving the office. The person who wants to receive the document at a later time places a  
call to the machine holding the original, and requests that the document be sent. In other words, it “requests” the  
machine holding the original.  
Setting send polling  
You can programme your fax machine to send documents in your absence when it is requested by a remote fax  
machine.  
1
2
3
4
Turn the document face down and feed it into the machine.  
Press Menu repeatedly, and press Enter when ADVANCED FAX appears.  
Select Set Polling Send by pressing < or >, and press Enter.  
Enter the poll code and press Enter.  
• The poll code is used to prevent your document from being retrieved by the unauthorized caller.  
• Your machine starts scanning the document(s) into memory and shows POLLING SEND in the display. If the  
receiving mode was TEL, the machine changes it to FAX mode automatically for being polling.  
• The poll code is preset to 0000 at the factory, which represents no poll code.  
• When it is polled, the page in memory will be deleted automatically and receiving mode returns to the state before  
setting polling. To cancel Send Polling, see "To cancel the scheduled job" on page 5.4.  
Setting receive polling  
1
Lift the handset or press Speaker Phone (or On Hook Dial) and enter the telephone number of the remote  
machine which is in Send Polling state.  
2
Press Menu when you hear a fax tone from the remote machine.  
• The display shows To poll documents press Enter  
.
3
4
Press Start Fax.  
Enter the Poll Code to retrieve the document, and press Enter.  
• The machine starts to receive document and prints.  
Not all fax machines have polling capability, and polling incompatibility sometimes occurs between fax machines made by  
different manufacturers.  
To cancel the scheduled job  
All scheduled jobs remain in memory after they have been set. Cancel unnecessary scheduled jobs to make more  
memory available.  
1
2
3
4
Press Menu repeatedly, and press Enter when ADVANCED FAX appears.  
Select Cancel Schedule by pressing < or >, and press Enter.  
Select the reserved transmission you want to cancel by pressing < or > repeatedly.  
Press Enter to cancel the selected schedule.  
5.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Forwarding a fax or message  
Fax forwarding  
While you are away from your home or office, you do not have to miss important faxes. Your machine can  
forward any faxes it receives to a fax machine at your new location, and it can print a copy for you to review  
when you get back as well.  
1
2
Press Menu repeatedly, and press Enter when ADVANCED FAX appears.  
Select Set Fax Forward by pressing < or >, and press Enter.  
The display shows Off, Forward or Forward & Print whenever you press < or >.  
• Off: disables fax forwarding  
• Forward: forwards a fax to your new location  
• Forward & Print: forwards a fax and prints it to your new location  
3
4
5
6
Press Enter after selecting Forward or Forward & Print.  
Enter the fax number and press Enter.  
Enter the start time and press Enter.  
Enter the end time and press Enter  
• The machine returns to Standby Mode and FWD will appear in the display at Fax Forward start time and every fax  
will be forwarded to your new location till the end time.  
• During forwarding time, the receive mode temporarily changes to:  
If your model is  
Receive mode  
In case  
SF-340  
Fax  
-
SF-345TP  
TAM  
Fax  
TAM message is recorded  
no TAM message  
Message forwarding (SF-345TP only)  
When you’re out of the office or home and you want to be notified whenever there’s a new message left on your  
machine, you need to use the Message Forwarding feature supplied with your machine.  
1
2
Press Menu repeatedly, and press Enter when SETUP TAM appears.  
Select Message Forward by pressing < or >, and press Enter.  
The display shows Off or On whenever you press < or >.  
• Off: disables message forwarding  
• On: forwards a message to your new location  
3
4
Press Enter after selecting On.  
Enter the fax number and press Enter.  
If you have ever recorded a Paging OGM before, the machine asks if you want to change.  
If there is no recorded OGM, the machine asks to record OGM.  
5
To change or record the OGM press Enter, and speak into the microphone.  
Or, press Stop/Clear to keep as it is.  
5.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Received fax remote notifcation (SF-345TP only)  
While you are away from your home or office, you can know if there is a new fax or not. Your machine can send  
a voice message with a recorded number you select when the new fax comes in.  
1
2
Press Menu repeatedly, and press Enter when ADVANCED FAX appears.  
Select Set Fax Notice by pressing < or >, and press Enter.  
The display shows Off or On whenever you press < or >.  
• Off: disables auto fax notice  
• On: dials the number and leaves the voice message to notify the new fax  
3
4
Press Enter after selecting On.  
Enter the telephone number and press Enter.  
If you have ever recorded a Fax auto notice OGM before, the machine asks if you want to change.  
If there is no recorded OGM, the machine asks to record OGM.  
5
To change or record the OGM press Enter, and speak into the microphone.  
Or, press Stop/Clear to keep as it is.  
5.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CHAPTER  
6
SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Inserting a pause  
With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial  
tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are  
registering Auto Dial such as a One-Touch or Speed Dial number.  
If you are asked for the number when setting up Auto Dial, follow this procedure:  
Press Redial/Pause to insert a pause while entering the number.  
• A ‘P’ is inserted at the point where you pressed Redial/Pause. If you need a longer pause, press Redial/Pause as  
many times you want.  
Using Recall (R or Flash)  
The name of this button (Recall) differs depending on your country. The Recall button is equivalent to R or Flash.  
If you do not have a special service that uses the switch-hook signal, do not press Recall during a call. If you do,  
you could disconnect the line.  
If you get a call and you want to transfer it to someone else, press Recall and dial the number of that other  
person. This may not work with some phone systems. Refer to your telephone’s instruction manual for more  
information. The recall is of “Time break” type.  
1
2
Press Recall when you are on the telephone.  
Enter the phone number to transfer it to someone else.  
• In UK, you may have some problems when you try to use BT services.  
3
Hang up the handset when the person answers.  
Using Caller ID  
Many countries have the Caller ID system which enables the receiver to view the numbers or names of callers.  
Once you have subscribed to Caller ID services, your machine can display caller information. To switch the  
Caller ID feature on:  
1
2
3
Press Menu repeatedly until SETUP SYSTEM appears, and press Enter.  
Select Caller ID by pressing < or >, and press Enter.  
Choose the desired option, and press Enter.  
On: Activates the Caller ID feature.  
On /w Junk Fax: Activates Caller ID and ignores any fax registered as a junk fax (see "Registering/deleting the junk fax  
Off: Deactivates the Caller ID feature.  
6.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Using the Mute  
While talking on the phone via speaker phone or handset, you many want to mute your voice for secret.  
To mute a call  
Press Phone Book/Mute while speaking.  
• The display shows MUTE to indicate it is activated.  
To release the mute  
Press Phone Book/Mute to resume conversation.  
Recording a conversation (SF-345TP only)  
While you are talking on the phone via speaker phone you may need to record the conversation for tracking a  
story. Your machine provides this convenience for your purpose.  
To record the conversation  
Press Play/Record while you are speaking.  
• The machine starts to record the conversation, and recording time is unlimited before memory is full.  
• The recorded conversation will be treated as an ICM.  
To stop recording  
Press Stop/Clear to stop recording.  
Sound setup  
You can set the alarm, key and wakeup sound.  
1
Press Menu repeatedly until SETUP SOUND appears, and press Enter.  
• The display shows the three options you can set: Wakeup Sound, Alarm Sound and Key Sound  
.
2
3
4
5
Press < or > to select the option you want, and press Enter.  
Select On or Off and press Enter.  
If you selected Off, the alarm or key click does not make any sound.  
If you selected On in the WakeUp Sound option, enter the time when the wakeup signal is ringing.  
• The wakeup signal is sound even though Silent mode is enabled.  
6.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
User reports  
Your fax machine can print reports containing useful information Scheduled Info, System Data, Help report,  
etc.  
To print a report  
1
2
3
Press Menu respectively until REPORTS appears, and press Enter.  
Choose the report you want by using < or >.  
Press Enter when the desired report is displayed.  
The selected report will be printed. The available reports are shown below:  
Report name  
Content  
How it prints  
Manual  
Help List  
This report covers the machine’s basic functions and commands. It can also  
be used as a quick reference guide.  
Sent Journal  
Received Journal  
Phonebook  
This report shows information concerning the transmission activities. They  
can be printed on command or if the machine is set to do so. It will automat- Manual/Automatic  
ically print after every 40 transmissions.  
This report shows information concerning the reception activities. They can  
be printed on command or if the machine is set to do so. It will automatically Manual/Automatic  
print after every 40 receptions.  
This report shows all of the numbers currently stored in the fax machine’s  
Manual  
memory as One-Touch Dial and Speed Dial.  
Sending  
Confirm  
This report shows the fax number, the number of pages, elapsed time of the  
operation, the communication mode, and the communication results. Set up  
Manual/Automatic  
automatically print Sending Confirm.  
Schedule Inform  
This report shows the document currently stored for Delayed FAX and Send  
Polling along with the operation number, starting time and type of operation, Manual  
etc.  
System Data  
Caller ID  
This report shows the status of the User Options. After you have changed  
any setting, print this report to check your changes.  
Manual  
Manual  
Manual  
Manual  
This report shows the information of the most recent 30 callers who have  
called your machine.  
Junk Fax  
This report shows the 20 telephone numbers which was marked as a junk  
fax.  
TAM Statusa  
Print Fax  
This report shows the status of the recorded messages. You can see when  
you have received a message and if you’ve listened to it or not.  
Your machine stores fax data into memory as far as the memory is available Manual  
and lets you print it at later time. For more information, see "Re-Printing  
Multi-Communication This report prints automatically if you have faxed documents to more than  
one location by using Broadcasting.  
Power Fail Report  
If experience a power failure, this report is printed automatically when  
power is restored, to notify you that there was a power failure. This report  
prints only when there was any scheduled job such as Delayed FAX or Send  
Poll, received job or TAM Message (SF-345TP) or Smart Sending job.  
Automatic  
a. SF-345TP only  
6.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                               
Re-Printing faxes  
You may sometimes need to re-print a received fax. Your machine stores the most recently received faxes in  
memory. As this memory is filled, old faxes that have been printed will be erased to make room for new faxes.  
To access this facility:  
1
2
Press Menu respectively until REPORTS appears, and press Enter.  
Press < or > to choose Print Fax, and press Enter.  
• If there are only old faxes, the machine will automatically print and returns to Standby mode without moving to the  
next step.  
• If there are no faxes in memory, the machine will inform you by displaying Memory Empty  
.
3
Select between Print New Fax or Reprint Old Fax and press Enter.  
Print New Fax: The machine prints all new faxes which have never been printed.  
Reprint Old Fax: The machine prints all faxes regardless of new or old.  
Registering/deleting the junk fax numbers  
Provided you have entered a junk fax number and activated the Caller ID option by selecting On /w Junk Fax, your  
machine will not receive any faxes those entered numbers. To set up the Caller ID, see "Using Caller ID" on  
Entering junk fax setup mode  
1
2
3
Press Menu repeatedly until SETUP SYSTEM appears, and press Enter.  
Select Set Junk Fax No.  
Press Enter and follow the instructions below depending on the setup type.  
To add a number  
1
Choose Add and press Enter.  
• The machine shows the first CID (Caller ID) number.  
• If the number is the same as one you have programmed in a One-Touch or Speed dial location and you assigned the  
name to that location, the machine shows the name instead of the number.  
2
Select the CID number you want to register as a junk fax, and press Enter.  
• You can scroll to the next one by pressing < or >.  
• You can enter up to 20 numbers. Numbers which have already been entered as a junk numbers are marked by ‘*’ at  
the end of the display.  
To delete a number  
1
Choose Delete and press Enter.  
• The machine shows the first junk number.  
2
Select the junk fax number you want to delete, and press Enter.  
• You can scroll to the next one by pressing < or >.  
6.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Using Short Message Service (SMS)  
Your machine supports the short message receiving service. Using this feature, you can receive short messages  
coming from other machines such as faxes, computers, or mobile phones.  
When you read or print your messages, the font not supported by your machine appears as blank. See page 9.4  
and page 9.5 for information about font available with your machine.  
Reading SMS messages  
You can read messages received from other machines.  
1
2
3
Press Menu repeatedly until SHORT MESSAGE appears, and press Enter.  
The first available option, Read Message, appears, then press Enter.  
The list of messages received appears. Select the message you want to read by pressing < or > and press  
Enter.  
• The messages you do not read are marked with an asterisk(*).  
• The machine can save up to 30 messages. Messages will not be lost even if power is disrupted.  
Printing SMS messages  
You can print messages received from other machines.  
1
2
3
4
Press Menu repeatedly until SHORT MESSAGE appears, and press Enter.  
Select Print Message by pressing < or > and press Enter.  
Select Print One by pressing < or > and press Enter.  
The list of messages received appears. Select one by pressing < or > and press Enter. The selected message  
prints out.  
• If you select Print All, then all messages stored in the machine will print out.  
Deleting stored SMS messages  
You can delete messages received from other machines.  
1
2
3
4
Press Menu repeatedly until SHORT MESSAGE appears, and press Enter.  
Select Delete Message by pressing < or > and press Enter.  
Select Delete One by pressing < or > and press Enter.  
The list of messages received appears. Select one by pressing < or > and press Enter. The selected message  
is deleted.  
• If you select Delete All, then all messages stored in the machine will be deleted.  
6.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setup SMS messages  
The Message Receiving Center number is preset when you buy your machine. When you need to change SMS  
settings including the message receiving center number and a subaddress number, you can change settings.  
To change the message receiving center number:  
1
2
3
Press Menu repeatedly until SHORT MESSAGE appears, and press Enter.  
Select SET SMS by pressing < or > and press Enter.  
Center Number appears.(SMS Center No.1)  
Press Enter and enter the Message Receiving Center number.  
4
Press Enter when the center number appears correctly in the display.  
To change the subaddress number:  
1
2
3
4
Press Menu repeatedly until SHORT MESSAGE appears, and press Enter.  
Select SET SMS by pressing < or > and press Enter.  
Select SMS Center No.1 < or > SMS Center No.2 by pressing < or > and press Enter.  
Enter the SMS Center No.1 < or > SMS Center No.2 number of the machine.  
Register flow:(UK only):  
Your machine is capable of receiving SMS text messages from any SMS capable device.  
Prior to receiving SMS messages you must subscribe to the Caller Display Service on the line that the facsimile  
device is to be connected. Please contact your telecoms provider to have this service enabled.  
Having subscribed to the Caller Display Service, your machine must be registered with your telecoms provider.  
The Default SMS Center Number and Registration Number (based on British Telecom system) are preset on  
your fax machine. To register the device, please follow the instructions below:  
1
2
3
4
Press Menu button repeatedly until SHORT MESSAGE appears, press Enter.  
Using < or > keys, scroll along to SET SMS, press Enter.  
REGISTER is displayed in LCD, press Enter.  
SEND REGISTER is displayed, press Enter.  
The fax machine will send a registration SMS to the BT SMS Center and register the device.  
Registration is now complete.  
Note: To edit SMS Center and Registration details please follow the instructions below:  
Editing Registration Number:  
1
2
3
4
Press Menu button repeatedly until SHORT MESSAGE appears, press Enter.  
Using < or > keys, scroll along to SET SMS, press Enter.  
REGISTER is displayed in LCD, press Enter.  
Using < or > keys, scroll to EDIT REGISTER, press Enter.  
6.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Enter registration number (provided by telecoms company), press Enter.  
Editing SMS Center Number(s):  
1
2
3
4
5
6
Press Menu button repeatedly until SHORT MESSAGE appears, press Enter.  
Using < or > keys, scroll along to SET SMS, press Enter.  
REGISTER is displayed in LCD, press Enter.  
Using < or > keys, scroll to SMS Center No.1,press Enter  
Enter new SMS center number (provided by telecoms company), press Enter.  
A second SMS center number can be added by editing the SMS Center No.2 field  
Clearing memory  
You can selectively clear information stored in your machine’s memory.  
1
Press Menu repeatedly until MEMORY CLEAR appears, and press Enter.  
The display shows the type of information you can clear from memory.  
2
3
Select what you want to delete by pressing < or >, and press Enter.  
Select ‘Y’ and press Enter when the machine asks if you are sure.  
• The types of information you can clear are:  
Item  
It will  
System ID  
Delete your system ID.  
Dial/Schedule  
Journal  
Clear the stored numbers in the Phonebook. In addition, all the Scheduled Jobs are also cancelled.  
Clear all records of transmissions and receptions.  
Default System  
Restore user-selectable options to factory default value.  
User options  
Your fax machine has various user-selectable features. These options are preset at the factory, but you may need  
to change them.To find out how the options are currently set, print the System Data List. For more information  
Setting system/TAM options  
The System Setup includes settings related to fax operation, and TAM Setup has settings related to answering  
machine operations.  
1
2
3
Press Menu.  
Select SETUP SYSTEM or SETUP TAM (SF-345TP only) by pressing < or >.  
Press Enter to enter specified Setup mode.  
6.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
4
5
6
7
Scroll up or down by pressing < or > to select the option you want to change.  
Press Enter when the option you want appears in the display.  
Press < or > to choose the desired status.  
Press Enter for the status you want.  
• To exit Setup mode at any time, press Stop/Clear  
.
• When you press Stop/Clear, the machine stores the options you’ve changed, and returns to the Standby Mode.  
System setup options  
The chart below shows the options in the left column and their suboptions in the right column.  
When you have entered System Setup, now you can see one of the options in the display by selecting < or >. The  
right column shows the suboptions belonging to the options.  
Option  
Suboption  
Language  
There are 7 languages you can use for display and report. The languages are:  
English, German, French, Italian, Spanish, Portuguese and Dutch.  
Sending Confirm  
A confirmation report shows whether the transmission was successful or not, how many pages were  
sent, etc. Choose ON to print a confirmation report automatically each time you send a fax. Choose OFF  
not to print whatever the result is. Choose ERROR to print only when an error occurs, and the transmis-  
sion was unsuccessful. Note that a confirmation report of a memory transmission includes the Image  
TCR (Transmission Confirmation Report) which shows the image of the first page with the various  
information depending on the value you made as described in "Image TCR" on page 6.10  
Paper Size  
Select the paper size you will use for fax receive, and copying.  
Auto Reduction  
When receiving a document as long as or longer than the paper loaded, the machine can reduce the data  
to fit your paper. If the fax machine cannot fit the data into one page with the feature enabled, the data is  
divided and printed in actual size on two or more sheets.  
Discard Size  
If you turn the Automatic Reduction feature off, you can set the fax machine to discard any excess  
image at the bottom of the page when receiving a document as long as or longer than the paper loaded in  
your machine. If the incoming fax is out of the margin you have set, it will be printed on two sheets of  
paper. Enter the desired Discard Size in millimeter.  
Rings To Answer  
Rcv. Start Codea  
You can select the number of rings before answering an incoming call. If you are using your machine as  
both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to  
answer.  
The Rcv. Start Code (Remote Receive Start Code) allows you to start fax receive from an extension phone  
plugged into the EXT socket (except SF-345TP) or equivalent. If you pick up the extension phone and  
hear a fax tone, press the Rcv. Start Code then the fax will start receiving. The code is preset to *9* at the  
factory. Enter the desired code from 0 to 9.  
ECM Modeb  
This mode compensates for poor line quality and ensures accurate, error- free transmission with any  
other ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased  
when ECM is enabled.  
Send From Memory  
Caller IDc,e  
This determines how to transmit the document manually. If it is on, the machine will scan documents  
into memory and then send a fax. If it is off, the machine will first dial and send.  
You can see the number of the person calling you. Before using the Caller ID feature, Caller ID service  
must be installed on your telephone line by the telephone company. For more information, see "Using  
Short Messagec,e  
Auto Journal  
You can use the short message service. Before using the Short Message service, it must be installed on  
your telephone line by the telephone company. For more information, see "Using Short Message Ser-  
A journal report shows the specific information concerning transmission or reception  
activities, the time and date of most recent 40 transmissions or receptions.  
6.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                           
Option  
Suboption  
Set Junk Fax No.  
You can prohibit your machine from uncertified or unwanted junk faxes like spam mail. To add a num-  
ber as a junk fax you should have at least one Caller ID detected by the machine. Even though you have  
added junk fax numbers, if you turned off the Caller ID option above, the Junk Fax protection will be  
DRPD Moded  
DRPD (Distinctive ring) is a service provided by some telephone companies that assigns two phone  
numbers to one phone line, each of which makes your phone ring differently. If you subscribe to this  
service, you can program your machine to learn one phone number and  
distinctive ring for incoming faxes.  
As the display shows, call this fax from other fax machine. The machine will learn the ring pattern and  
displays DRPD OK when finished. Now, you can use the Rcv.Mode/Contrast to select DRPD receiving  
mode.  
Remote Test  
Silent Mode  
This lets the service center check the status of your machine to find out if there is anything wrong.  
You can turn off sounds the machine makes. There are two kinds of this mode; Manual and Daily  
.
Manual: To activate or deactivate this mode, the user presses Silent Mode  
.
Daily: Enter start and end time. You have to specify them in 24-hour format.  
Resolution  
Contrast  
Sets the default resolution when copying and faxing.  
Sets the default contrast when copying and faxing.  
Image TCR  
You can prevent the Image TCR from being included in the confirmation report for privacy or security  
protection.  
Dial Modee  
Set the dialling mode to the type of the exchange to which you are connected.  
Behind PABXe  
If your machine is connected to the line from PABX (Private Automatic Branch eXchange), you need to  
enable this option by selection On  
.
a. SF-340only.  
b. Error Correction Mode  
c. This option may not work when connected to a PABX.  
d.Distinctive Ring Pattern Detection  
e.One or more options may not appear in the display depending on your country. If so, it is not applicable to your machine.  
TAM options (SF-345TP only)  
Options  
Suboption  
Save Charge  
Lets you dial into your machine from a remote phone and check whether anyone has left a message with-  
out being charged. When Save Charge is On, the machine answers your call on the number of rings you  
have specified in the Rings to Answer option. If there is no message, the machine answers on the second  
ring after the number of Rings to Answer. This gives you time to hang up the phone before the machine  
answers and saves the price of the call.  
Call Monitor  
Enables you to hear callers leave messages on your machine.  
You can select the maximum time allowed for caller messages.  
ICM Record Time  
Remote Password  
You can change the three-character password used to access your machine from a remote phone. The  
password is preset to “#139#” at the factory. The first and the last #’s are fixed, but you can change the  
three middle numbers.  
Silence Action  
In TAM mode, the machine decides the next action when silence is detected for 10 seconds. Available  
suboptions are:  
Receive Fax: Switches to FAX Receive Mode.  
Record Silence: Keeps the recording silent.  
Disconnect: Disconnects the line and returns to Standby Mode.  
Howler Action  
In TAM mode, the machine decides the next action when a howling is detected for 9 seconds. Available  
suboptions are:  
Record Howler: Disregards howling.  
Disconnect: Disconnects the line and returns to Standby Mode.  
Message Forward  
Forwards a message to your new location whenever a caller leaves a message. For more information, see  
6.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                       
CHAPTER  
7
USING PRINTING  
This chapter is only for SF-345TP users.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making Connection  
Connect the USB cable which came with your machine.  
• The “New Hardware found” message is shown, click the “cancel” button.  
Installing Samsung Software  
This printer supports only black print.  
You must install software using the supplied CD-ROM after you have set up your machine and connected it to  
your computer.  
System Requirements  
Verify the following:  
• At least 64MB (Windows 9x/Me), 128 MB (Windows 2000), 256 MB (Windows XP) or more of RAM is installed on  
your PC.  
• There is at least 300 MB or free disk space on your PC.  
• All applications are closed on your PC before beginning installation.  
• You are using Windows 98, Windows Me, Windows 2000, or Windows XP.  
• You are using at least Internet Explorer 5.0.  
Installing Printer Software  
For Windows 98/Me/2000/XP users, cancel the “New Hardware Found” screen when the computer boots up.  
Make sure that your machine is plugged in and connected to your computer’s USB port before installing  
software from the CD.  
1
2
Insert the supplied CD into your CD-ROM drive.  
• The CD should automatically run and the opening window appear.  
• If the installation window does not appear, click Start, and then Run. Type X:setup.exe, replacing “X” with the letter  
of your CD-ROM drive, and click OK  
.
If the following window opens, connect your machine to the computer and turn the printer on. Then click  
Next  
.
• If the machine is already connected and turned on, this screen does not appear. Skip to the next step.  
• If you click Next and the machine is not connected to the machine, an alert message window appears.  
After connecting the machine and turning it on, click Yes. Or, if you want to install the software without the machine,  
Click No  
.
7.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
3
Choose the installation type and click Next.  
Typical: Program will be installed with the most common options and is recommended for most users.  
Custom: Allows you to choose the language of the software you want to install. After selecting the language and the  
printer, click Next  
.
4
After the installation is finished, to register yourself as a user of a Samsung Printers appears. Select the  
check box and click Finish. You are now accessed to the Samsung web site. Otherwise, just click Finish  
.
5
The windows asking you to restart your computer appears. Select Yes and restart your computer.  
7.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the default printer  
To set your printer as the default printer, follow the below steps:  
1
2
Click the Windows Start menu.  
For Windows 98/Me/2000, select Settings and then Printers  
.
For Windows XP, select Printers and Faxes  
.
3
4
5
Select the Samsung SF-340_CF-340Series printer.  
Click the right mouse button on the printer icon and:  
For Windows 98/Me, select Set as Default  
.
For Windows 2000/XP, select Set as Default Printer  
.
Reinstalling Software  
Reinstalling is required if your installation fails or the software does not work properly.  
1
2
You can select Start  
>
Programs  
• Otherwise, Insert the supplied CD-ROM into your CD-ROM drive.  
Click Repair  
>
Samsung SF-340_CF-340Series  
>
Maintenance.  
.
• If your machine is not connected to the computer, the Connect Samsung SF-340_CF-340Series window opens.  
After connecting the machine, click Next  
.
3
Select the printer you want to reinstall and click Next.  
4
When the reinstallation is done, click Finish.  
7.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Uninstalling Software  
Uninstallation is required if you are upgrading the software or if your installation fails. You can uninstall the  
item using the Windows uninstallShield.  
1
You can select Start  
>
Programs  
• Otherwise, Insert the supplied CD-ROM into your CD-ROM drive.  
Click Remove  
Then you will see a component list so that you can remove any of them individually.  
>
Samsung SF-340_CF-340Series  
>
Maintenance.  
2
3
.
4
5
After selecting items you wish to remove, click Next.  
When your computer asks you to confirm your selection, click Yes  
.
• The driver is removed from your computer.  
6
7
When the uninstallation is done, click Finish  
.
The message box recommends you restart your computer. Click OK, then restart your computer.  
Printing a Document  
This procedure describes the general steps required for printing from various Windows applications. The exact  
steps for printing a document may vary depending on the application program you are using. Refer to the user’s  
guide of your software application for the exact printing procedure.  
The following steps describe the typical process to print from Windows:  
1
Ensure that your machine is properly connected to the computer, the machine is powered on, and there is  
paper in the paper tray.  
2
Verify that you have installed the Samsung software for your computer. For details, see “Installing Sam-  
3
4
Start the program you are using to create the document, and create or open the document you want to print.  
Choose Print or Print Setup from the File menu. The Print window is displayed (It may look slightly dif-  
ferent depending on your application). Make sure that Samsung SF-340_CF-450 Series is selected as your  
default printer.  
• You can select the basic print settings within the Print window. These settings includes the number of copies and the  
print range.  
7.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
5
6
Click Properties if you want to make any adjustments that are appropriate for printing your document.  
• If you see Setup Printer, or Options, click that button instead. Then click Properties in the next screen.  
,
Now you see the Samsung SF-340_CF-340Series Properties window, which allows you to access all of  
information you need when using your machine.  
The Setup tab first displays.  
The preview image shows  
the sample page with the  
settings you specified.  
• You can select the printing quality by choosing from Draft  
,
Normal or Best. The higher the setting, the sharper the  
printed characters and graphics. Higher settings may increase the time it takes to print a document.  
• You can choose only in the plain paper in the Paper Type  
.
Paper Size allows you to choose the size of the paper loaded in the tray.  
Click the Features tab.  
The preview image shows  
the sample page with the  
settings you specified.  
The Orientation option allows you to select the direction in which information is printed on a page.  
Portrait prints across the width of the page, letter style.  
Landscape prints across the length of the page, spreadsheet style.  
• If you want to print the page mirror view, check the Mirror Image box.  
Landscape  
Portrait  
The Multi Pages per Sheet option allows you to select the number of pages to print on a single sheet of  
paper. To print more than one page per sheet, the pages are smaller.  
• 2 Pages per Sheet print 2 pages on one sheet.  
4 Pages per Sheet print 4 pages on one sheet  
Print Page Border print a border around each page on the sheet.  
7.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Poster Printing option allows you to print a single-page document onto 4, 9 or 16 sheets of paper, for  
the purpose of pasting the sheets together to form one poster-sized document.  
The Start Printing from Last Page option allows you to print all pages in reversed order.  
The Copies option allows you to select the number of copies.  
When you finish setting the properties, click OK until the Print window displays.  
Click OK to start printing.  
7
8
The printer’s Properties window may differ, depending on your operating system. This User’s Guide shows the  
Properties window on windows 98.  
NOTE: Most Windows applications overrides the settings you specified in the printer driver. Change all of the print settings  
available in the software application first, and change any remaining settings using the printer driver.  
The settings you change remain in effect only while you are using the current program. To make your changes permanent,  
make them in the Printers folder. Follow these steps:  
• Click the Windows Start menu.  
• For Windows 98/Me/2000, select Settings and then Printers  
.
For Windows XP, select Printers and Faxes  
.
• Select the Samsung SF-340_CF-340Series printer.  
• Click the right mouse button on the printer icon and:  
• For Windows 98/Me, select Properties  
.
For Windows 2000/XP, select Printing Preferences  
.
• Change the settings on each tab and click OK  
.
Cancelling a Print Job  
There are two ways to cancel a print job:  
To stop a print job from the control panel:  
Press Stop/Clear.  
Your machine finishes printing the page that is moving through the machine and deletes the rest of the print job.  
Pressing the button cancels only the current job. If more than one print job is in the machine’s memory, you need  
to press the button once for each job.  
To stop a print job from the Printers folder:  
If the print job is waiting in a print queue or print spooler, such as the Printer group in Windows, delete the job as  
follows:  
• Click the Windows Start menu.  
• For Windows 98/2000/Me, Select Settings and then Printers  
For Windows XP, select Printers and Faxes  
.
.
• Double-click the Samsung SF-340_CF-340Series icon.  
• From the Document menu:  
For Windows 98/Me, select Cancel Printing  
For Windows 2000/XP, select Cancel  
.
.
NOTE: You can access this window simply by double-clicking the printer icon at the bottom right corner of the Windows  
desktop.  
Using Help  
Your machine has a help screen that can be activated using the Help button in the printer’s Properties window.  
The help screen gives detailed information about the printer features provided by the printer driver.  
You can also click  
in the upper right hand corner, and then click on any setting.  
7.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
7.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
8
CARE AND MAINTENANCE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning the document scanner  
To keep your machine working properly, occasionally clean the White Roller, ADF Rubber, and the Scanning  
Glass. If they are dirty, documents sent to another fax machine won’t be clear.  
If you turn the power off to clean the scanner, documents stored in memory will be lost.  
1
2
Open the Control Panel.  
Remove the White Roller.  
• At the right-hand end of the White Roller there is a bushing that is secured with a small tab.  
• Push the tab slightly inward, then rotate towards you. Then pull up the right-hand part to take it out.  
3
4
Wipe the roller surface with a soft cloth dampened with water.  
Clean the ADF Rubber piece at the back of the Control Panel,  
too.  
5
6
Carefully wipe the Scanning Glass with a soft, dry cloth.  
• If the glass is very dirty, first wipe it with a slightly dampened cloth,  
then with a dry one.  
• Be careful not to scratch the glass surface.  
Replace the roller in reverse order, and then close the Control  
Panel firmly until it clicks into place.  
8.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Replacing the print cartridge  
When you notice that the print becomes light or Ink Low. Install new ink cartridge appears in the  
display, replace the print cartridge. You should replace the cartridge with the same one which was provided with  
the machine.  
The part number for replacement cartridges are:  
• mono: INK-M40  
1
2
Prepare a cartridge.  
• Take out a cartridge from its packaging and carefully remove the tape covering the printhead.  
• Hold the cartridge by the colored top or black areas only. Do not touch the copper area.  
Press Cartridge Change.  
The Cartridge Carrier moves to the install position.  
3
4
Open the Control Panel and Cartridge Compartment cover.  
Push down the cartridge, and remove it.  
5
To load the cartridge insert the cartridge below the metal clip and pointing down at the front. When the  
cartridge is pushed to the back of the cartridge carrier lift the front of the cartridge up until it clicks into  
place.  
• If the cartridge moves loosely in the Carrier, it has not clicked into place. Repeat this step.  
6
7
8
Replace the Cartridge Compartment Cover and Control Panel.  
Press Enter.  
Press 1 for new cartridge, or 2 for the old one.  
• In case you selected the 1:New, the alignment form will print.  
• When you put in a new cartridge, you must choose 1:New  
.
• When you put in a used cartridge, choose 2:Used. This helps you to check the correct amount of ink you have left.  
• If you mix up several used cartridges, it is not possible to check the correct amount of remaining ink. Once you have  
put in a new cartridge, use it until it is completely exhausted.  
9
Enter the number which represents the straightest line, and press Enter.  
8.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Cleaning the printhead  
If the nozzles seem to be clogged and characters are not printing completely, clean the printhead as described  
below:  
1
2
3
Press Menu repeatedly until MAINTENANCE appears, and press Enter.  
Scroll to Clean Head by pressing < or >, and press Enter.  
Examine the printed test pattern.  
• If print quality does not improve, reinstall the cartridge and repeat Clean Head.  
• If the line is still broken, wipe the nozzles and contacts.  
Aligning the printhead  
When the vertical line does not seem to be straight or you want to improve the print quality, you may need to  
align the cartridge.  
1
2
Press Menu repeatedly until MAINTENANCE appears, and press Enter.  
Scroll to Align Head by pressing < or >, and press Enter.  
• The machine prints a form.  
3
Enter the number which represents the straightest line, and press Enter.  
Ink level view  
Your machine allows you to check the amount of ink remaining. To view the current ink level:  
1
2
Press Menu repeatedly until MAINTENANCE appears, and press Enter.  
Scroll to View Ink Level by pressing < or >, and press Enter.  
• The machine displays a fractional number. For examples, ‘1/8’ means that ink is low and you need to replace the  
cartridge.’8/8’ means that a new cartridge is installed.  
Shading adjustment  
The shading is adjusted at the factory. If, however, you drop and damage your machine while moving, we rec-  
ommend you adjust shading for optimized lightness.  
To adjust shading, do as follows:  
1
Press Menu repeatedly until MAINTENANCE appears, and press Enter.  
2
3
Scroll to Adjust Scanner by pressing < or >, and press Enter.  
Load a plain WHITE sheet of paper (no writing or graphics) into the loading slot, and press Enter.  
• The machine starts to scan the document to adjust shading.  
• Printing quality may be unexpectedly worse if you do not use a plain WHITE paper for the adjustment.  
8.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Self testing  
When you want to test if the machine is working correctly, you can check it by running self test.  
1
2
Press Menu repeatedly until MAINTENANCE appears, and press Enter.  
Scroll to Self Test by pressing < or >, and press Enter.  
• The machine runs self test and prints a report which shows the current status of the machine.  
Print cartridge maintenance  
The print cartridge life is very sensitive to the content of the received fax or a copy you made. To increase its  
life, we recommend you follow the instructions below:  
• DO NOT unpack the cartridge until you are ready to use it.  
• Store it in the same environment as the printer.  
• If you have unpacked the cartridge but are not using it, store it in a storage unit. If you do not have a storage unit,  
store the cartridge in an airtight plastic bag.  
• DO NOT leave it exposed for an extended period.  
• DO NOT refill the cartridge. The warranty will not cover damage caused by using refilled cartridges.  
Cleaning the cartridge  
To maintain good printing quality, we recommend you occasionally wipe the Print Nozzles and Contacts as  
described below:  
Wiping the print nozzles and contacts  
When the print is not clear or dots are missing, the problem may be caused by dried ink on the:  
• Print cartridge nozzles  
• Print cartridge contacts  
• Print cartridge carrier contacts  
1
2
3
Press Cartridge Change.  
Open the Control Panel and Cartridge Compartment Cover and remove the cartridge.  
Gently blot and wipe the contacts and nozzles dry.  
• Use a clean cloth dampened with water only to gently clean the entire copper-colored  
area, including the nozzles and contacts.  
• To dissolve any dried ink, hold the damp cloth against the nozzles for about three sec-  
onds.  
4
5
Reinstall the cartridge and close the Cover and Panel.  
• If you spend a long time cleaning the cartridge, the cartridge carrier may have moved back to the original position.  
If so, press Cartridge Change again to move the carrier to the install position.  
Press 1 for new cartridge, or 2 for the old one.  
• If the line is still broken, clean the Cartridge Carrier contacts. For more information, see "Cleaning the cartridge  
8.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Cleaning the cartridge carrier contacts  
Before cleaning these parts, there should be no scheduled job such as Delayed Fax, Send Polling, or faxes received into  
memory. Once you have unplugged the power cord from the machine, all data will be lost.  
1
2
3
4
5
6
Press Cartridge Change.  
Open the Control Panel and Cartridge Compartment Cover and remove the cartridge.  
Remove the print cartridge.  
Unplug the power cord from the electrical outlet of the rear of the machine.  
Clean the Cartridge Carrier contacts with clean and dry cloth.  
Plug in the power cord and reinstall the cartridge.  
8.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
LCD error messages  
Display  
Status/Solution  
Related to:  
Adjust scanner first in Maintenance  
menu  
The shading waveform to be used as a reference is corrupted due Scanner  
to unknown reason. Adjust the scanner to fix this problem as  
Check white paper document and try  
again  
The scanning level is too low to compare with reference level.  
To adjust shading, you should use the plain and white paper.  
Scanner  
Clean white roller, glass and try again  
The scanning level is slightly low, which can affect the image  
quality. To clean concerned parts, see "Cleaning the document  
Scanner  
Duplicated with [Speed No.xx]  
The ‘xx’ indicates the location  
number.  
The same number has already been registered into another speed Telephone  
dial location.  
Exceeded Job Memory  
The machine can hold 3 My Favorites but you tried to add more. Fax  
Exceeded Job Memory  
Cancel scheduled job and try again  
The broadcasting and delayed fax can hold 5 jobs in total.  
Cancel scheduled job and try again.  
Fax  
Exceeded Total  
Message Memory  
The machine can hold up to 100 messages (OGM + ICM +  
recorded conversations).  
TAM (SF-345TP  
only)  
Erase old messages to make a room in the memory.  
ICM Memory Full  
The voice memory is full. No more caller’s messages can be  
recorded (Total recording time is about 15 minutes).  
TAM (SF-345TP  
only)  
Ink Low. Install new ink cartridge  
The print cartridge has run out of ink. To install a new Print Car-  
this message is displayed, you can make a copy or print a report. Cartridge  
But, stored data in memory can be printed by changing the car-  
tridge.  
Install ink cartridge  
Invalid Time  
Print cartridge is not installed or improperly installed.  
The time you set for fax forwarding is wrong.  
Cartridge  
Fax  
Job Not Assigned  
You attempted to cancel the scheduled job but there is no jobs  
scheduled. You attempted to delete or print send the My Favor-  
ites document when there is no document stored.  
Fax  
Junk Fax Empty  
Junk Fax Full  
You attempted to delete the junk fax number when there is no  
junk fax number.  
Fax  
The machine can hold 20 junk fax numbers but you tried to add Fax  
more.  
Load Document  
Load paper and press Enter  
Memory Full  
You have tried to send a fax and there is no document loaded  
into the machine.  
Document  
You have tried to do any job and there is no paper loaded into the Paper  
machine.  
Memory has become full while receiving a fax or short message. Fax/Telephone  
Memory Full  
Press Enter to continue  
Memory has become full while scanning a document. Press  
Enter to send or copy the scanned pages only. To cancel the job  
press Stop/Clear and try again when memory becomes avail-  
able, or split the new document into smaller parts.  
Fax/Copy  
8.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Display  
Status/Solution  
Related to:  
Memory Received  
When it toggles with:  
The machine has data stored in memory. Depending on the mes- Fax  
sage do as follows:  
Ink Low. Install new ink cartridge  
Replace the print cartridge with new one.  
Load paper and press Enter  
Load the paper, and press Enter. There might be a jam. Clear the  
Install ink cartridge  
Install a print cartridge.  
No answer from remote fax  
The other machine has not answered after all your attempts to  
send a fax.  
Fax  
Telephone  
No CID Number  
No Dial Number  
The machine could not detect the CID (Caller ID) number.  
There is no number in the redial memory, which is successfully Telephone  
dialled up to now.  
No Message  
There is no message to play or erase. There is no received short TAM (SF-345TP  
message to read or print.  
only)/Telephone  
No New Message  
Not available while reprinting fax  
Not Found  
There is no new caller message. There is no received short  
message.  
TAM (SF-345TP  
only)/Telephone  
The machine can not receive a new fax while printing the stored Fax  
faxes.  
The number you are searching does not exist in memory.  
Telephone  
Number already  
registered  
The number you are trying to register already exists in the  
phonebook or junk fax list.  
Telephone  
Telephone  
Fax  
Number Not Assigned  
There is no number assigned to the One-Touch or two-digit  
Speed number.  
Poll Code Error  
The remote user entered wrong poll code.  
Poll job exists already  
You have programmed a polling send. Cancel scheduled job and Fax  
try again.  
Polling Error  
Check remote site  
The machine you want to poll is not ready to answer your poll. Fax  
The person you are polling should have loaded their fax machine  
with a document and be in send poll state.  
Receiving Error.  
Ask sender to try again.  
There is an error while receiving a fax.  
Fax  
Record TAM OGM  
To select TAM receive mode, you should record OGM prior to TAM (SF-345TP  
pressing the TAM button.  
only)  
Remove jammed  
document  
The document you are sending has jammed in the feeder. To  
Document  
You tried to copy or fax a document which is longer than  
390mm.  
Remove jammed paper and press  
Enter.  
The paper has jammed during printing. To clear the paper jam,  
Paper  
Send Error. Try again.  
There is an error while sending a fax.  
Fax  
Fax  
System Busy  
Try again later  
There is no available resource to execute job you ordered.  
To redial now, press Start Fax  
Processing Job  
The machine is waiting to automatically redial the fax number  
that was busy or did not answer.  
Fax  
You attempt to enter My Favorites, while sending My Favorites Fax  
document or printing My Favorites document.  
8.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Fixing Problems  
Your problem may be listed in "LCD error messages" on page 8.7. The chart below shows other problems you  
can solve yourself. If not, call the service company shown in the separate Warranty Card.  
Fax problems  
Problem  
Solution  
The machine is not working, there is no  
display and the buttons are not working.  
Unplug the power cord and plug it in again. Check that your socket is live.  
No dial tone.  
Check that the phone is connected properly. Check the phone socket in the  
wall by plugging in another phone.  
The numbers stored in memory do not dial Make sure the numbers are programmed correctly. To print a Phonebook  
correctly.  
The document does not feed into the  
machine.  
Be sure the document is not wrinkled, and you are putting it in correctly.  
Check that the document is the right size and not too thick or too thin.  
You cannot receive faxes automatically.  
Check if TEL appears on the right side of the display. In TEL mode, you  
cannot receive a fax automatically. Be sure the handset is seated on the  
cradle properly.  
The machine cannot receive faxes  
manually.  
Do not hang up the handset before pressing Start fax.  
The machine does not send anything.  
Check that the document is loaded face down.Send should show up in the  
display.You may have hung up the handset before you pressed Start fax  
.
Check if the machine to which you are sending can receive your fax.  
You cannot poll another machine.  
The fax machine you are polling may be using a poll code.  
The fax you received has blank bits on it. The machine sending to you may be faulty. A noisy phone line can cause  
line errors. Check your machine by making a copy.  
Spots or lines missing from the fax you  
receive.  
Check if your phone line is noisy. Check if the printhead is clean by  
making a copy.  
You are receiving poor quality copies.  
The fax machine sending to you may have a dirty scan glass. Check for a  
noisy phone line.  
Some of the stretched words on the fax you The machine sending to you had a temporary document jam.  
receive  
Your machine does not make copies.  
Make sure your document is loaded face down.  
There are lines on copies or documents you Check your scan glass for marks and clean it (see "Cleaning the document  
send.  
The machine dials a number, but fails to  
make a connection with a remote fax  
machine.  
The remote fax machine may be turned off, or unable to answer incoming  
calls. Speak with the remote operator and ask for the problem to be  
rectified.  
You cannot store a document in memory.  
There may not be enough memory available to hold the document you  
want to store. If the display shows a Memory Full message, delete any docu-  
ments you no longer need, then retry the document.  
Blank areas appear at the bottom of each  
You may have selected the wrong paper settings. To select the proper  
page or on continuation pages, with only a paper size, see "Paper Size" on page 6.9.  
small strip of material printed at the top.  
8.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Print quality problems  
Problem  
Solution  
Light or blurred characters.  
printer cartridge has completely run out, Ink Low. Install new ink cartridge is dis-  
played. To install a new print cartridge, see "Replacing the print cartridge"  
on page 8.3. Make sure the print cartridge is installed correctly. To clean  
Smudged or dark characters.  
Characters with white lines.  
Make sure the paper is straight and unwrinkled. Let ink dry before  
handling the paper. To clean the print cartridge, see "Cleaning the car-  
If Ink Low. Install new ink cartridge is displayed, install a new print cartridge as  
stall the print cartridge. Clean the print cartridge (see "Cleaning the car-  
Improperly formed or misaligned  
characters.  
Abnormal black horizontal lines  
Paper feeding problems  
Problem  
Solution  
Paper is jammed during  
printing.  
Paper sticks together.  
You can load up to 50 sheets in the ASF (Automatic Sheet Feeder).  
Check if you overloaded. Humid conditions may cause some paper to stick together.  
Paper fails to feed.  
Remove any obstructions inside the printer.  
Multiple sheets of paper  
feed.  
When loading paper, do not force the paper down into the printer. If multiple sheets have  
caused a paper jam, clear the paper jam. (see "Paper jams during printing" on page 8.11.)  
Paper skews or buckles in ASF can hold up to 50 sheets. Make sure the paper guides do not cause the paper to bow in  
the automatic sheet  
feeder.  
the bin. When loading paper, do not force it down into the printer.  
8.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Clearing jams  
Document jams during transmission  
If a document jams during transmission or copying, Remove jammed document appears in the display. DO NOT pull the  
document out of the slot. Doing so could harm your machine.  
To clear document jam:  
1
2
3
Open the Control Panel.  
Carefully remove the jammed document.  
Close the Control Panel firmly until it clicks into place.  
Paper jams during printing  
If the fax paper jams while you are receiving or printing, Remove jammed paper and press Stop/Clear appears in the message.  
If the paper is jammed in the Received Paper Output Area  
1
2
Remove the jammed paper by pulling it out smoothly in the  
direction of the arrow as shown.  
• If the paper tears when it is being removed check to ensure that  
no small pieces have been left inside the machine.  
Press Stop/Clear.  
If the paper is jammed in the Paper Feed Area  
1
Remove the jammed paper as shown.  
• If the paper tears when it is being removed check to ensure that  
no small pieces have been left inside the machine.  
2
3
Reload new paper with the print side facing toward you.  
Press Stop/Clear when finished.  
8.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
8.12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
9
APPENDIX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Item  
Specification  
Inkjet Desktop Facsimile Transceiver  
Type of unit  
Communication System  
Compatibility  
Public Switched Telephone Network (PSTN) and PABX  
ITU Group3  
Compression scheme  
Modem speed  
MH, MR, MMR  
14400/12000/9600/7200/4800/2400bps  
CIS (Contact Image Sensor)  
8.5 inches (216mm)  
Scanning method  
Input document size  
Effective scanning width  
Effective recording width  
Power consumption  
8.27 inches (210mm)  
8 inches (203mm)  
Standby: 4.9 Wh  
Printing Mode: Maximum 15 Wh  
Temperature range  
Humidity range  
50°F to 95°F (10°C to 35°C)  
20 to 80% RH (non-condensing)  
Dimension (W x D x H)  
368 x 254 x 141mm (folded all trays)  
368 x 557 x 256mm (extended all trays)  
Weight  
3.5 Kg (including handset)  
See Rating Label attached on the back of the machine.  
200 x 200dpi  
Power source  
Resolution  
Scan  
PC print  
(SF-345TP  
only)  
Mono: 600 x 600dpi  
Copy  
Mono: 600 x 300dpi (Colour copy is not supported)  
Faxing  
Standard: 203 x 98dpi  
Fine: 203 x 196dpi  
Super Fine: 203 x 392dpi  
ADF  
ASF  
10 sheets (0.075~0.12mm thick)  
2
2
50 sheets (70g/m ~ 90g/m )  
YES  
ECM mode  
Grey scale  
64 Greyscales  
User memory capacity  
1.25Mbytes(capable of 100 pages at 4% print duty on A4 : SF-345TP)  
500 Kbytes (capable of 40 pages at 4% print duty on A4 : SF-340)  
128 Kbytes (capable of 10 pages at 4% print duty on A4,  
This memory is used to store smart fax documents.)  
Voice Recording time  
Message back up time  
About 15 Min. (SF-345TP only)  
About 30 Min.(SF-345TP only)  
Mono: INK-M40  
Replacement Ink Cartridge Part Number  
Ink Cartridge Life  
Initial Cartridge(supplied with the machine; INK-M40S):  
About 265 sheets (based on ITU #1 chart see "A sample of ITU #1 chart  
Replacement Cartridge(to be purchased in the market; INK-M40):  
About 750 sheets (based on ITU #1 chart see "A sample of ITU #1 chart  
9.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
A sample of ITU #1 chart (reduced to 60.5%)  
9.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Font List for Print  
9.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Font List for LCD  
9.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Replacing the fitted plug (UK)  
Important  
The mains lead for this machine is fitted with a standard (BS 1363) 5 amp plug and has a 5 amp fuse.  
When you change or examine the fuse, you must re-fit the correct 5 amp fuse. You then need to replace  
the fuse cover. If you have lost the fuse cover, do not use the plug until you get another fuse cover from the people  
from whom you bought the machine.  
The 5 amp plug is the most widely used type in the UK and should be suitable.  
However, some buildings (mainly old ones) do not have normal 5 amp plug sockets.  
You need to buy a suitable plug adaptor. Do not remove the moulded plug.  
Warning  
If you cut off the moulded plug, get rid of it straight away.  
You cannot rewire the plug or you may get an electric shock if you put it into a socket.  
Important warning: You must earth this machine  
The wires in the mains lead have the following colour code:  
Blue: Neutral  
Brown: Live  
If the wires in the mains lead do not match the colours marked in your plug, do the following:  
You must connect the blue wire to the pin which is marked with the letter N or coloured black.  
You must connect the brown wire to the pin which is marked with the letter L or coloured red.  
You must have a 5 amp fuse in the plug, adaptor, or at the distribution board.  
Notes for use of this device (New Zealand)  
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that  
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the  
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item  
will work correctly in all respects with another item of Telepermitted equipment of a different make or model,  
nor does it imply that any product is compatible with all of Telecom s network services.  
This equipment shall not be set up to make automatic calls to the Telecom 111 Emergency Service.  
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.  
Important Notice  
Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone,  
not dependent on local power, is available for emergency use.  
9.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Declaration of conformity (European countries)  
Approvals and Certifications  
The CE marking applied to this product symbolises Samsung Electronics Co., Ltd. Declaration of Conformity  
with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated:  
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low  
voltage equipment.  
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the Member States  
related to electromagnetic compatibility.  
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and  
the mutual recognition of their conformity.  
A full declaration, defining the relevant Directives and referenced standards can be obtained from your  
Samsung Electronics Co., Ltd. representative.  
EC Certification  
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment  
Directive (FAX)  
This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the  
analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has  
been designed to work with the national PSTNs and compatible PBXs of the European countries:  
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.  
The product has been tested against TBR21 and/or TBR 38. To assist in the use and application of terminal equipment  
which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an  
advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility  
of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory  
notes contained in this document.  
9.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of interference (US)  
In normal operation, your SAMSUNG fax machine produces and uses radio-frequency energy. In some cases,  
this can cause interference to other electronic equipment. Part 15 of the FCC rules establishes guidelines limiting  
the amount of radio-frequency energy which may be produced by electronic equipment. Tests have proven that your  
Samsung FAX machine meets or exceeds these guidelines, and is classified a Class B Digital Device for operation  
in a residential environment. When installed and operated according to instructions, your SAMSUNG fax machine  
should not cause interference to the types of equipment expected to be found in a normal residential environment.  
Unauthorized changes or modifications could void the user s authority to operate the equipment.  
In the event your SAMSUNG fax machine appears to cause interference to other electronic equipment, it can often  
be easily remedied. First determine if the source of interference really is your FAX machine. To do this, turn its power  
off and on while observing the equipment experiencing the interference. If the interference disappears when you turn  
the FAX machine off, the following steps can be very effective in correcting interference problems:  
Connect the FAX machine to an AC outlet which is on a different circuit breaker from the equipment experiencing  
interference.  
Increase the distance between the FAX machine and the equipment experiencing interference.  
Cable TV amplifiers and splitters are extremely prone to interference. Be certain that they are as far as possible from  
the FAX machine and its AC power and telephone cords.  
Replace twin lead antenna wire with shielded coaxial cable, and use proper connectors and adaptors.  
Turn or relocate the receiving antenna. In most cases this is easily done by simply moving a radio. A TV antenna may  
need to be reoriented or installed in another area of the building.  
Consult your dealer, a reputable radio/TV technician, or an Amateur Radio Operator for help.  
Fax branding (US)  
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other  
electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a  
margin at the top or bottom of each transmitted page or on the first page of the transmission the following information:  
the date and time of transmission identification of either business, business entity or individual sending the message;  
and telephone number of either the sending machine, business, business entity or individual.  
See "Chapter 1" for instructions on how to enter this information into your Samsung FAX machine’s memory.  
The Telephone Company may make changes in its communications facilities, equipment operations, or procedures  
where such action is reasonably required in the operation of its business and is not inconsistent with the rules and  
regulations in FCC Part 68. If such changes can be reasonably expected to render any customer terminal equipment  
incompatible with telephone company communications facilities, or require modification or alteration of such  
terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice  
in writing, to allow the customer an opportunity to maintain uninterrupted service.  
9.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Telephone company information (US)  
FCC identification number  
The Ringer Equivalence Number and FCC Registration Number for this equipment may be found on the label located  
on the bottom or rear of the machine. In some instances you may need to provide these numbers to the telephone  
company.  
Ringer equivalence number  
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful  
for determining whether you have overloaded the line. Installing several types of equipment on the same telephone  
line may result in problems making and receiving telephone calls, especially ringing when your line is called.  
The sum of all Ringer Equivalence Numbers of the equipment on your telephone line should be less than five in order  
to assure proper service from the telephone company. In some cases, a sum of five may not be usable on your line.  
If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone  
line, as it may cause harm to the telephone network.  
Warning  
FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer  
could void the user s authority to operate this equipment.  
In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the  
customer that service may be stopped. However, where prior notice is impractical, the company may temporarily  
cease service, providing that they:  
a) Promptly notify the customer.  
b) Give the customer an opportunity to correct the equipment problem.  
c) Inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to  
procedures set out in FCC Rules and Regulations Subpart E of Part 68.  
You should also know that:  
Your Samsung FAX machine is not designed to be connected to a digital PBX system.  
Special features, such as Call Waiting , may interrupt FAX service, and we suggest that these services not be  
installed on the FAX line.  
If you intend to use a computer modem or fax modem on the same phone line as your FAX machine, you may  
experience transmission and reception problems with all the equipment. It is recommended that no other equipment,  
except for a regular telephone, share the line with your FAX machine.  
If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors  
for both the power and the telephone lines. Surge protectors can be purchased from your dealer or telephone and  
electronic specialty stores.  
When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency  
number to advise the emergency service dispatcher of your intentions. The dispatcher will give you further instructions  
on how to actually test the emergency number.  
This equipment may not be used on coin service or party lines.  
This telephone provides magnetic coupling to hearing aids.  
You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.  
9.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contact SAMSUNG WORLD  
WIDE  
If you have any comments or questions regarding Samsung products, contact  
the SAMSUNG customer care center.  
Country  
CANADA  
Customer Care Center  
Web Site  
1-800-SAMSUNG (7267864)  
MEXICO  
01-800-SAMSUNG  
(7267864)  
U.S.A  
1-800-SAMSUNG (7267864)  
0800-333-3733  
0800-124-421  
ARGENTINE  
BRAZIL  
CHILE  
800-726-7864 (SAMSUNG)  
0-800-507-7267  
1-800-10-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
1-800-299-0013  
1-800-234-7267  
800-7267  
PANAMA  
PUERTO RICO  
1-800-682-3180  
1-800-751-2676  
REP.  
DOMINICA  
TRINIDAD &  
TOBAGO  
1-800-7267-864  
VENEZUELA  
BELGIUM  
1-800-100-5303  
02 201 2418  
CZECH  
844 000 844  
REPUBLIC  
DENMARK  
FINLAND  
FRANCE  
38 322 887  
09 693 79 554  
08 25 08 65 65  
(€ 0,15/min)  
GERMANY  
01805 - 121213  
(€ 0,12/min)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country  
HUNGARY  
Customer Care Center  
06 40 985 985  
Web Site  
ITALIA  
199 153 153  
LUXEMBURG  
02 261 03 710  
NETHERLANDS 0900 20 200 88  
(€ 0,10/min)  
NORWAY  
POLAND  
PORTUGAL  
SLOVAKIA  
SPAIN  
231 627 22  
0 801 801 881  
80 8 200 128  
0850 123 989  
902 10 11 30  
08 585 367 87  
0870 242 0303  
8-800-200-0400  
8-800-502-0000  
1300 362 603  
SWEDEN  
U.K  
RUSSIA  
UKRAINE  
AUSTRALIA  
CHINA  
800-810-5858  
010- 6475 1880  
HONG KONG  
INDIA  
2862 6001  
3030 8282  
1600 1100 11  
INDONESIA  
JAPAN  
0800-112-8888  
0120-327-527  
1800-88-9999  
MALAYSIA  
PHILIPPINES  
1800-10-SAMSUNG  
(7267864)  
SINGAPORE  
THAILAND  
1800-SAMSUNG (7267864)  
1800-29-3232  
02-689-3232  
TAIWAN  
0800-329-999  
1 800 588 889  
VIETNAM  
SOUTH AFRICA 0860 7267864 (SAMSUNG)  
U.A.E 800SAMSUNG (7267864)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q See DVR QSD2316C8 500 User Guide
RCA CRT Television 35V432T User Guide
Rose electronic Network Card Crystal View User Guide
Rowenta Iron DE 873 User Guide
Saeco Coffee Makers Coffeemaker 104342 User Guide
Saitek Speaker System 3D 210 User Guide
Samson Speaker System RESOUND RS12M User Guide
Samsung Air Conditioner DB98 17031A5 User Guide
Samsung Cell Phone E1210 User Guide
Scientific Atlanta Satellite TV System EXPLORER 2000 User Guide