COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP) (depending on the model)
TELETEXT (depending on the model)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Sound Control
◆ Accessories................................................................... 4
◆ Control Panel (depending on the model) .......................... 4
◆ Connection Panel (depending on the model) ................... 5
◆ Viewing the Remote Control (depending on the model).. 7
◆ Installing Batteries in the Remote Control..................... 8
◆ Changing the Sound Standard.................................... 21
◆ Adjusting the Sound Settings
(depending on the model) ................................................ 21
◆ Extra Sound Settings (depending on the model)............ 22
◆ Selecting the Sound Mode (depending on the model)... 23
Operation
Function Description
◆ Switching Your Television On and Off........................... 8
◆ Placing the Television in Standby Mode ....................... 8
◆ Plug & Play Feature (depending on the model)................ 9
◆ Viewing an External Signal Source
(depending on the model) ................................................ 10
◆ Editing Device Names (depending on the model).......... 10
◆ Setting the Time.......................................................... 24
◆ Choosing Your Language............................................ 26
◆ Setting the Blue Screen .............................................. 26
◆ Selecting the Melody................................................... 26
◆ Teletext Feature (depending on the model).................... 27
Appendix
Channel Control
◆ Automatic Degaussing to Remove Colour Patches.... 29
◆ Storing Channels Automatically ...................................11
◆ Storing Channels Manually......................................... 12
◆ Skipping Unwanted Channels..................................... 13
◆ Sorting the Stored Channels....................................... 13
◆ Assigning Names to Channels.................................... 14
◆ Fine Tuning Channel Reception.................................. 14
◆ Troubleshooting: Before Contacting Service Personnel . 29
◆
Using the LNA (Low Noise Amplifier) Feature
(depending on the model) ................................................ 15
Picture Control
◆ Changing the Picture Standard................................... 15
◆ Adjusting the Picture Settings..................................... 16
◆ Selecting the Picture Size (depending on the model).... 17
◆ Setting the Digital Noise Reduction ............................ 17
◆ Using the Tilt Control Feature
(depending on the model) ................................................ 18
◆ Selecting the Film Mode ............................................. 18
◆ Viewing the Picture In Picture (PIP)
(depending on the model) ................................................ 19
◆ Freezing the Current Picture....................................... 20
☛
Important
➢
Note
Symbols
Press
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Accessories
Please make sure the following items are included with your TV.
If any items are missing, contact your dealer.
The items colour and shape may vary depending on the model.
➢
Warranty Card / Registration Card /
Safety Guide Manual
Remote Control & Batteries (AAA x 2)
Owner’s Instructions
(Not available in all locations)
Control Panel (depending on the model)
The product colour and shape may vary depending on the model.
➢
Front of the TV
4
5
4
5
1 2 3
1 2 3
6
7
6
7
3 2 1
5 6 7
1
2
Power On/Off
Press to turn the TV on and off.
5
6
MENU
Press to see an on-screen menu of your TV’s features.
Standby indicator
-
+
Blinks and turns off when the power is on and lights up in
stand-by mode.
Press to decrease or increase the volume.
In the on-screen menu, use the -
use the ◄ and ► buttons or ENTER (
remote control.
+ buttons as you
) button on the
3
4
Remote control sensor
Aim the remote control towards this spot on the TV.
7
C/P.
SOURCE
Press to change channels.
In the on-screen menu, use the C/P.
you use the ▲ and ▼ buttons on the remote control.
Displays a menu of all of the available input sources (TV,
Ext.1, Ext.2, AV/S-Video, Component, HDMI).
buttons as
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Panel (depending on the model)
The product colour and shape may vary depending on the model.
Whenever you connect an audio or video system to your television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety
➢
☛
precautions.
Rear of the TV
4
2
1
or
3
Cable Television Network
Side of the TV
or
5
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 75 Ω coaxial socket.
To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable
television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television
until you obtain a picture that is both sharp and clear.
Connecting to the COMPONENT Input
◆
◆
◆
Connect component video cables to component connector (Y, PB, PR) on the rear of your television and the other ends to
corresponding component video out connectors on the DTV receiver or DVD player.
The Y, PB and PR connectors on your component devices (DTV receiver or DVD player) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
Connect RCA audio cables to AUDIO (L/R) IN on the rear of your television and the other ends to corresponding audio out
connectors on the DTV receiver or DVD player.
3
4
Connecting to the SCART Input/Output
Connect SCART cable to an appropriate external A/V device such as a VCR, DVD player, decoder, satellite receiver, video game
device, or video disc player.
- The EXT1 (RGB) connector is used for equipment with an RGB output, such as a video game device or video disc player.
- The EXT2 (AV) connector is used for the audio/video output of current television programme.
Connecting to the HDMI (depending on the model)
◆
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and
digital TVs).
◆
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
◆
“High Definition Multimedia interface”allows the transmission of high definition digital video data and multiple channels
of digital audio (5.1 channels).
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi - channel digital audio.
◆
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the AUDIO (L/R) connector on DVI for
sound output.
When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has
been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture
distortion, image breakup or no picture.
Supported modes for HDMI and COMPONENT
480i-60Hz
480p-60Hz
576i-50Hz
576p-50Hz 720p-50/60Hz 1080i-50/60Hz
HDMI
X
O
O
X
O
O
O
O
O
O
Component
O
O
Do not attempt to connect the HDMI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed.)
5
Connecting to the RCA/S-VIDEO Input
◆
Connect RCA video or S-Video cable to VIDEO IN or S-VIDEO IN on the rear of your television and the other ends to
corresponding video or S-Video out connectors on the A/V device.
◆
Connect RCA audio cables to AUDIO (L/R) IN on the rear of your television and the other ends to corresponding audio out
connectors on the A/V device.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control (depending on the model)
◆
◆
◆
The actual configuration on your TV may be different, depending on the model.
Operation of remote control may be affected by bright artificial light near to the TV set.
This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and Volume
buttons.
➢
1
2
3
4
5
6
7
8
9
0
Television stand-by
g
h
i
Still picture
Direct channel selection
One/Two-digit channel selection
Tuner/cable network selection
Channel control
Picture size selection
Sub picture (PIP) channel
selection
1
*
(
j
k
Sub picture (PIP) location
selection
2
3
Volume increase
Sub picture (PIP) size selection
Temporary sound switch-off
Volume decrease
Teletext Functions
(Refer to page 27)
)
a
4
Menu display
4
9
!
$
^
*
Exit from the teletext display
Teletext index
Move to the required menu
option / Adjust an option value
respectively
b
Teletext page hold
Teletext size selection
Teletext store
5
6
!
@
#
$
%
^
Picture-In-Picture On/Off
Sound effect selection
c
d
Picture effect selection
7
8
9
0
Teletext mode selection (LIST/
FLOF)
Sub picture (PIP) source selection
Sound mode selection
(
b
c
d
f
l
Teletext sub-page
Teletext next page
Teletext previous page
Teletext cancel
e
Interchange the main and sub
picture (PIP)
f
l
g
&
*
(
Turbo sound
!
External input selection
Teletext reveal
Switch repeatedly between the
last two channels displayed
@
#
$
%
^
Teletext display / Mix both
Teletext information and the
normal broadcast
h
i
)
a
b
c
d
e
f
Automatic switch-off
SRS TruSurround XT On/Off
Next channel
@#gh
Fastext topic selection
j
k
Previous channel
&
Exit from any display
Change confirmation
Information display
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1
2
Lift the cover at the back of the remote control upward as shown in the figure.
Install two AAA size batteries.
Make sure to match the “+”and “–”ends of the batteries with the diagram inside the
➢
compartment.
3
Close the cover as shown in the figure.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet
(7m) from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢
If the remote control doesn’t work! Check the following:
1. Is the TV power on?
➢
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Operation
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1
2
3
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
➢
Press the “ ” button (On/Off) on the front of the television.
The standby indicator on the front of the television lights up.
Press the POWER button on the remote control to switch the television on.
The programme that you were watching last is re-selected automatically.
If you have not yet stored any channels, no clear picture appears.
Refer to “Storing Channels Automatically”on page 11 or “Storing Channels Manually”on page 12.
➢
4
To switch your television off, press the “ ” button (On/Off) again.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube.
Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1
Press the POWER button on the remote control while viewing.
The television is in standby mode.
2
To switch the television back on, simply press it again.
You can also switch on by pressing the TV ( ), P
/
, or numeric button.
➢
Do not leave your television in standby mode for long periods of time. Turn your television off by pressing the “ ” button
(On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.
☛
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play Feature (depending on the model)
When the television is initially powered on, three basic customer settings proceed
automatically and subsequently: setting the language, channel and clock.
Plug & Play
Start Plug & Play
1
If the television is in Standby mode, press the POWER button on the
remote control.
OK
The message Start Plug & Play is displayed.
Enter
Return
2
3
The Language menu will automatically appear after several seconds.
Setup
T V
Select the appropriate language by pressing the ▲ or ▼ button.
English
Plug & Play
Language
Time
Blue Screen
Melody
Press the ENTER (
) button to enter the language.
Deutsch
Français
:
The message Check antenna input. is displayed.
Nederlands
Español
If any language is not selected on the Language menu, the Language
menu will disappear about 30 seconds later.
Italiano
➢
Svenska
Português
Ελληνικά
Ceština
Srpski
4
5
6
Make sure that the antenna is connected to the TV.
Press the ENTER (
) button.
Move
Enter
Skip
The Auto Store menu is displayed.
Select your country by pressing the ▲ or ▼ button, then press the ENTER
Plug & Play
(
) button.
Check antenna input.
The Search menu is displayed.
OK
Press the ENTER (
) button to start search the channels.
Enter
Skip
The channel search will start and end automatically. After all the available
channels are stored, the Clock Set menu appears.
Auto Store
Belgium
T V
Refer to “Storing Channels Automatically”on page 11.
➢
Country
Search
:
France
7
8
Press the ◄ or ► button to move to the hour or minute.
Set the hour or minute by pressing the ▲ or ▼ button.
Germany
Italy
Netherlands
Spain
◆
◆
Refer to “Setting and Displaying the Current Time”on page 24.
You can set the hour and minute directly by pressing the numeric
buttons on the remote control.
➢
Sweden
Switzerland
United Kingdom
Others
Eastern Europe
When you have finished, press the MENU ( ) button.
The message Enjoy your viewing is displayed, and then the channel
which has been stored will be activated.
Move
Enter
Skip
Search
C − − − − − − −
P
1
87 MHz
10%
If you want to reset this feature...
Stop
Skip
Enter
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Setup, and then press the ENTER
Clock Set
T V
(
) button.
The Plug & Play is selected.
Hour Minute
-- --
3
Press the ENTER (
) button again.
This feature starts with the message Start Plug & Play displayed.
Move
Adjust
Skip
Plug & Play
Enjoy your viewing
OK
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing an External Signal Source (depending on the model)
Use the remote control to switch between viewing signal from connected equipment,
such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable).
Input
TV
T V
Source List
Edit Name
:
1
2
3
4
Press the MENU ( ) button to display the menu.
Press the ENTER (
) button to select Input.
Press the ENTER (
) button again.
Press the ▲ or ▼ button to select the required signal source, then press
the ENTER ( ) button.
Move
Enter
Return
Available signal source: TV, Ext. 1, Ext. 2, AV/S-Video Component,
,
HDMI
Source List
T V
◆
◆
When you connect equipment to the TV, you can choose between the
following sets of jacks: Ext. 1 Ext. 2 Component, or HDMI on the TV’s
rear panel, and AV S-Video on the TV’s side panel.
You can also set these options simply by pressing the TV ( ) or SOURCE
) button. If you change the external source while viewing, pictures
might take a short period of time to be switched.
➢
TV
Ext.1
Ext.2
AV/S-Video :------
Component :------
HDMI
,
,
:------
:------
/
(
:------
Move
Enter
Return
Editing Device Names (depending on the model)
You can give a name to the external source.
Input
TV
T V
1
2
3
Press the MENU ( ) button to display the menu.
Press the ENTER ( ) button to select Input
Press the ▲ or ▼ button to select Edit Name, then press the ENTER
Source List
Edit Name
:
.
(
) button.
4
5
Press the ▲ or ▼ button to select the external source to be edited, then
press the ENTER ( ) button.
Move
Enter
Return
Select the required device’s name by pressing the ▲ or ▼ button, then
press the ENTER ( ) button.
Available device names: VCR DVD
Receiver DVD Receiver Game Camcorder
HDD Recorder), or PC
Edit Name
T V
,
,
Cable STB
,
HD STB
,
Sat. STB
,
AV
------
Ext.1
Ext.2
AV
S-Video
Component :------
HDMI :------
VCR
,
,
,
,
DVD Combo,
DHR (DVD
DVD
Cable STB
.
HD STB
Sat. STB
AV Receiver
6
Press the EXIT (
) button to exit.
Move
Enter
Return
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Control
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability depends on your
country). Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. However you can sort numbers manually and clear
any channels you do not wish to watch.
Channel
T V
Auto Store
Manual Store
Channel Manager
Sort
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
)
Name
More
3
4
Press the ENTER (
) button again.
) button again.
Move
Enter
Return
Press the ENTER (
The available countries are listed.
Auto Store
T V
5
6
7
Select your country by pressing the ▲ or ▼ button, then press the
Country : United Kingdom
Search
ENTER (
) button.
Press the ▲ or ▼ button to select Search, then press the ENTER (
button.
)
Press the ENTER (
The search will end automatically.
To stop the search before it has finished, press the MENU ( ) or the
ENTER ( ) button.
) button again to start the search.
Move
Enter
Return
➢
Search
8
When searching and storing are completed, the Sort menu is displayed.
P
1
C − − − − − − −
87 MHz
10%
◆
To sort the stored channels into the desired numerical order, go to step 4
of the “Sorting the Stored Channels”procedure on page 13
Stop
Return
◆
To exit from the channel store function without sorting the channels,
press the MENU ( ) button repeatedly until the menus disappear.
Enter
Sort
T V
From
To
: P 1 -----
: P-- -----
Store
:
?
Move
Adjust
Return
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
Channel
T V
Auto Store
Manual Store
Channel Manager
Sort
◆
Whether or not to store each of the channels found.
◆
The programme number of each stored channel which you wish to identify.
1
2
Press the MENU ( ) button to display the menu.
Name
Press the ▲ or ▼ button to select Channel, then press the ENTER (
)
More
button.
Move
Enter
Return
3
4
Press the ▲ or ▼ button to select Manual Store, then press the ENTER
(
) button.
Manual Store
:P 1
T V
Select the required option by pressing the ▲ or ▼ button, then press the
ENTER ( ) or ◄/► button.
Prog.
Colour System :AUTO
Sound System :B/G
5
Press the EXIT ( ) button to exit.
Channel
Search
Store
:C--
: 98 MHz
◆
Prog. (Programme number to be assigned to a channel)
Press the ◄ or ► button until you find the correct number.
:
?
-
Move
Adjust
Return
◆
◆
◆
Colour System
:
AUTO/PAL/SECAM/NTSC 4.43
-
Press the ▲ or ▼ button to select the required colour standard.
Sound System
:
B/G, D/K
,
I,
L
-
Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
-
-
Press the ▲ or ▼ button to select
Press the ► button, then press the ▲ or ▼ button to select the required
number.
C
(Air channel) or (Cable channel).
S
You can also select the channel number directly by pressing the numeric
buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard
required.
➢
➢
◆
Search (When you do not know the channel numbers)
-
-
Press the ◄ or ► button to start the search.
The tuner scans the frequency range until the first channel or the channel
that you selected is received on the screen.
◆
Store (When you store the channel and associated programme number)
Set to OK by pressing the ENTER ( ) button.
-
Channel mode
☛
◆
P
(Programme mode): When completing tuning, the broadcasting
◆
◆
assigned number for each cable channel in this mode.
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Unwanted Channels
You can exclude the channels you have chosen from the channels you scanned.
When you scan through the stored channels, those you have chosen to skip are not
displayed.
All of the channels that you do not specifically choose to skip are displayed during
scanning.
Channel
T V
Auto Store
Manual Store
Channel Manager
Sort
1
2
Press the MENU ( ) button to display the menu.
Name
Press the ▲ or ▼ button to select Channel, then press the ENTER (
)
More
button.
Move
Enter
Return
3
Press the ▲ or ▼ button to select Channel Manager, then press the
ENTER (
) button.
It can be displayed simply by pressing the CH MGR (Channel Manager)
button.
Channel Manager
P 1 C 4
➢
1/15
Prog.
4
5
6
Press the ▲ or ▼ button to select the channel to be add or erase.
1
2
3
4
5
6
7
C 4
C--
S 1
S 3
S 6
S 8
S10
Press the ENTER (
) button to move to the ( ) field.
) button to add the channel.
Press the ENTER (
The (✓) symbol next to the channel appears and the channel is added.
If you press the ENTER ( ) button again, the (✓) symbol next to the
channel disappears and the channel is not added.
Add
Move
Page
Enter
Return
➢
7
8
Repeat step 4 to 6 for each channel to be added or erased.
Press the EXIT ( ) button to exit.
Sorting the Stored Channels
This operation allows you to change the programme numbers of stored channels.
This operation may be necessary after using auto store.
Channel
T V
1
2
Press the MENU ( ) button to display the menu.
Auto Store
Manual Store
Channel Manager
Sort
Name
Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
)
3
4
5
6
Press the ▲ or ▼ button to select Sort, then press the ENTER (
button.
)
More
Move
Enter
Return
Sort
Select the channel number that you wish to change by pressing the ◄ or
► button repeatedly.
Press the ▲ or ▼ button to select To. Select the new channel number
which you wish to identify by pressing the ◄ or ► button repeatedly.
T V
From
To
Store
: P 1 -----
: P-- -----
Press the ▲ or ▼ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the ENTER (
:
?
) button.
The selected channel is exchanged with the one previously stored to the
chosen number.
7
8
For all the channels to move to the required channel numbers, repeat steps
4 to 6 after selecting the From by pressing the ▲ or ▼ button.
Move
Adjust
Return
Press the EXIT (
) button to exit.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Names to Channels
Channel names will be assigned automatically when channel information is
broadcast. These names can be changed, allowing you to assign new names.
Channel
T V
Auto Store
Manual Store
Channel Manager
Sort
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
)
Name
More
3
4
Press the ▲ or ▼ button to select Name, then press the ENTER (
button.
)
Move
Enter
Return
Name
Select the channel to be assigned to a new name by pressing the ▲ or ▼
button.
T V
5
6
Press the ► button.
Prog.
13
Ch.
C21
C23
C25
C26
C28
Name
A
-----
-----
-----
-----
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9) or a
symbol (space, -). Move on to the previous or next letter by pressing the
◄ or ► button.
14
15
16
17
7
8
Repeat Steps 4 to 6 for each channel to be assigned to a new name.
Press the EXIT (
) button to exit.
Move
Adjust
Return
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the channel manually.
Channel
T V
More
Fine Tune
LNA
1
2
Press the MENU ( ) button to display the menu.
:
Off
Press the ▲ or ▼ button to select Channel, then press the ENTER (
)
button.
3
4
Press the ▲ or ▼ button to select Fine Tune, then press the ENTER
Move
Enter
Return
+2
(
) button.
To obtain a sharp and clear picture and good sound quality, press the ◄
or ► button to reach the required setting.
Fine Tune
P 2
*
The channel number changes to red and is marked with a “ ”.
*
Reset
5
6
To reset the fine tuning to
0
, select Reset by pressing the ▲ or ▼ button.
Move
Adjust
Press the ENTER (
) button.
Return
Press the EXIT (
) button to exit.
Fine Tune
P 2
0
Reset
Move
Enter
Return
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LNA (Low Noise Amplifier) Feature (depending on the model)
This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the
incoming signal.
Channel
T V
More
Fine Tune
LNA
1
2
Press the MENU ( ) button to display the menu.
:
Off
Press the ▲ or ▼ button to select Channel, then press the ENTER (
)
button.
3
4
Press the ▲ or ▼ button to select LNA, then press the ENTER (
button.
)
Move
Enter
Return
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
(
) button.
Channel
T V
5
Press the EXIT (
) button to exit.
More
Fine Tune
LNA
◆
◆
Setting the LNA option to “On”may produce worse picture quality
due to the current channel’s signal condition. Hence, apply LNA On/Off
selectively according to the picture quality that is currently displayed.
Off
➢
:
On
Depending on areas, factory mode of LNA, will be set up as On or Off
.
Move
Enter
Return
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing
requirements.
Picture
T V
1
2
Press the MENU ( ) button to display the menu.
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
:
:
:
:
On
0
Off
Off
3
4
Press the ENTER (
) button twice to select Mode.
Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Dynamic - Standard - Movie - Custom
Move
Enter
Return
Mode
T V
5
Press the EXIT ( ) button to exit.
Dynamic
Mode
:
Standard
You can also set these options simply by pressing the P.MODE (
) button.
Movie
➢
Contrast
Brightness
Sharpness
Colour
:
:
:
Custom
50
50
50
More
Move
Enter
Return
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Settings
Your television has several settings which allow you to control picture quality.
Mode
Dynamic
T V
1
2
Press the MENU ( ) button to display the menu.
Mode
:
Contrast
Brightness
Sharpness
Colour
:
:
:
:
90
50
50
50
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
3
4
Press the ENTER (
) button twice to select Mode.
More
Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Dynamic - Standard - Movie - Custom
Move
Enter
Return
90
Contrast
5
Press the ▲ or ▼ button to select the option to be adjusted, then press
the ENTER (
) button.
Available options: Contrast
-
Brightness
-
Sharpness
-
Colour
-
Move
Adjust
Tint(NTSC only)
Mode
T V
6
7
8
Press the ◄ or ► button to reach the required setting.
More
Press the MENU ( ) button.
Colour Tone : Normal
Reset
Press the ▲ or ▼ button to select Colour Tone, then press the ENTER
) button.
(
9
Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Cool2 - Cool1 - Normal - Warm1 - Warm2
Move
Enter
Return
Mode
Resetting the Picture Settings to the Factory Defaults
T V
More
10
Press the ▲ or ▼ button to select Reset, then press the ENTER (
button.
The previously adjusted settings will be reset to the factory defaults.
)
Colour Tone : Normal
Reset
11
Press the EXIT (
) button to exit.
◆
◆
The reset function is set for each picture mode.
➢
Move
Enter
Return
The television has an “automatic degaussing”system that is activated if
magnetic interference is present. To degauss the television screen, switch
power off by pressing the “ ”button (On/Off) on the front panel. (Refer
to “Automatic Degaussing to Remove Colour Patches”on page 29.)
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your viewing requirements.
Picture
T V
1
2
Press the MENU ( ) button to display the menu.
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
:
:
:
:
On
0
Off
Off
3
4
Press the ▲ or ▼ button to select Size, then press the ENTER (
button.
)
Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options:
Move
Enter
Return
Size
◆
Normal
,
Zoom1
,
Zoom2 (Normal model)
T V
◆
Auto Wide
,
16:9
,
Zoom1 Zoom2 4:3 (Wide model)
,
,
Auto Wide
16:9
Zoom1
Zoom2
4:3
Lifting is available in the Zoom1 or Zoom2 mode by pressing the ▲ or ▼
button.
5
Press the EXIT (
) button to exit.
◆
Normal: Sets the picture to 4:3 normal mode.
Zoom1: Magnifies the size of the picture on the screen.
Zoom2: Expands the Zoom1 format picture.
Move
Enter
Return
◆
Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Magnifies the size of the picture on the screen.
Zoom2: Expands the Zoom1 format picture.
4:3: Sets the picture to 4:3 normal mode.
✱ Available Picture Size for Component and HDMI Mode.
Normal Model
Wide Model
Mode
Normal
Zoom1
Zoom2
Wide
Auto Wide
16:9
O
Zoom1
Zoom2
4:3
480i/576i
480p/576p
720p/1080i
O
O
O
O
X
X
O
X
X
X
X
O
X
X
O
X
X
O
X
X
O
O
X
O
O
O
You can also set these options simply by pressing the P.SIZE button.
➢
Setting the Digital Noise Reduction
If the signal received by your television is weak, you can activate this feature to reduce
any static and ghosting that may appear on the screen.
Picture
T V
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
1
2
Press the MENU ( ) button to display the menu.
:
:
:
:
On
0
Off
Off
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
3
4
5
Press the ▲ or ▼ button to select Digital NR, then press the ENTER (
button.
)
Move
Enter
Return
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
) button.
(
Picture
T V
Press the EXIT (
) button to exit.
Mode
:
Dynamic
Size
: Auto Wide
Off
On
Digital NR
Tilt
Film Mode
PIP
:
:
:
:
On
0
Off
Off
Move
Enter
Return
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tilt Control Feature (depending on the model)
If you find that the picture received is slightly tilted to one side, you can adjust the tilt
setting.
Picture
T V
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
1
2
Press the MENU ( ) button to display the menu.
:
:
:
:
On
- 1
Off
Off
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
3
4
5
Press the ▲ or ▼ button to select Tilt
Press the ◄ or ► button to reach the required setting (-7 to +
Press the EXIT ( ) button to exit.
.
7).
Move
Adjust
Return
Selecting the Film Mode
You can automatically sense and process film signals from some sources and adjust
the picture for optimum quality.
Picture
T V
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
1
2
Press the MENU ( ) button to display the menu.
:
:
:
:
On
0
Off
Off
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
)
3
4
Press the ▲ or ▼ button to select Film Mode, then press the ENTER
(
) button.
Move
Enter
Return
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
(
) button.
Picture
T V
5
Press the EXIT (
) button to exit.
Mode
:
Dynamic
Size
Digital NR
Tilt
Film Mode
PIP
: Auto Wide
◆
◆
Not available in the Component or HDMI mode.
➢
:
:
:
:
On
0
Mode discrepancies, such as turning off Film Mode while viewing a film
source or turning on Film Mode while viewing Non-film sources, may
affect the picture quality.
Off
Off
On
Off
Move
Enter
Return
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model)
You can display a sub picture within the main picture of TV program or external A/V
devices such as VCR or DVD. In this way you can watch TV program or monitor the
video input from any connected devices while watching TV or other video input.
Picture
T V
Mode
Size
Digital NR
Tilt
Film Mode
PIP
:
Dynamic
: Auto Wide
Activating Picture In Picture
:
:
:
:
On
0
Off
Off
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER (
)
button.
Move
Enter
Return
3
Press the ▲ or ▼ button to select PIP, then press the ENTER (
button.
)
PIP
T V
4
5
Press the ENTER (
) button again.
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
(
) button.
:Large
:
:P 1
You can also activate the PIP simply by pressing the PIP button.
To deactivate, press it again.
➢
Move
Enter
Return
Table of PIP Settings
X : This PIP combination is not available.
O : This PIP combination is available.
Sub Picture
TV
EXT 1
EXT 2
AV/S-Video
Component
HDMI
Main Picture
TV
EXT 1
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
EXT 2
AV/S-Video
Component
HDMI
X
X
X
X
Selecting a Signal Source for PIP
PIP
T V
6
Press the ▲ or ▼ button to select Source, then press the ENTER (
button.
Press the ▲ or ▼ button to select a source of the sub picture, then press
the ENTER ( ) button.
)
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
:Large
:
:P 1
You can select these options simply by pressing the SOURCE button.
➢
Move
Enter
Return
continued...
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Swapping the Contents of the PIP and Main Picture
PIP
T V
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
7
Press the ▲ or ▼ button to select Swap, then press the ENTER (
button.
The main picture and the sub picture are interchanged.
)
:Large
:
:P 1
You can also interchange the main picture and the sub picture simply by
pressing the SWAP button.
➢
Move
Enter
Return
PIP
Changing the Size of the PIP Window
8
Press the ▲ or ▼ button to select Size, then press the ENTER (
)
T V
button.
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
Press the ▲ or ▼ button to select a size of the sub picture, then press the
ENTER ( ) button.
Available options: Large - Small - Double Window
You can select these options simply by pressing the SIZE button.
:Large
:
:P 1
➢
Changing the Position of the PIP Window
Move
Enter
Return
PIP
9
Press the ▲ or ▼ button to select Position, then press the ENTER (
button.
)
T V
Press the ▲ or ▼ button to select a position of the sub picture, then press
the ENTER ( ) button.
Available options:
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
-
-
-
:Large
:
:P 1
You can select these options simply by pressing the POSITION (
)
➢
button.
Move
Enter
Return
PIP
Changing the PIP Channel
10
Press the ▲ or ▼ button to select Prog., then press the ENTER (
)
T V
button.
PIP
Source
Swap
Size
Position
Prog.
:On
:TV
Press the ◄ or ► button to select the channel of the sub picture, then
press the ENTER ( ) button.
:Large
:
:P 1
◆
◆
You can select the channel of the sub picture simply by pressing the
or button.
When the Source is set to TV, you can select the channel of sub
➢
P
picture.
Move
Adjust
Return
Freezing the Current Picture
You can freeze the picture when watching a television programme simply by pressing
the STILL button.
◆
◆
To return to normal viewing, press this button again.
Not available in Component/HDMI mode.
➢
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control
Changing the Sound Standard
You can select the type of special sound effect to be used when watching a given
broadcast.
Sound
T V
Mode
Equalizer
SRS TruSurround XT : Off
Auto Volume
Turbo Sound
Pseudo Stereo
:
Custom
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Sound, then press the ENTER (
button.
)
: Off
: Off
: Off
3
4
Press the ENTER (
) button again to select Mode.
Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options: Standard - Music - Movie - Speech - Custom
Move
Enter
Return
Sound
T V
5
Press the EXIT ( ) button to exit.
Standard
Mode
Equalizer
:
Music
Movie
You can also set these options simply by pressing the S.MODE (
) button.
➢
Speech
Custom
SRS TruSurround XT : Off
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
Move
Enter
Return
Adjusting the Sound Settings (depending on the model)
The sound settings can be adjusted to suit your personal preferences.
Sound
T V
1
2
Press the MENU ( ) button to display the menu.
Mode
Equalizer
SRS TruSurround XT : Off
:
Custom
Press the ▲ or ▼ button to select Sound, then press the ENTER (
button.
)
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
3
4
Press the ▲ or ▼ button to select Equalizer, then press the ENTER (
button.
)
Press the ◄ or ► button to select the option to be adjusted, then press the
▲ or ▼ button to reach the required setting.
Move
Enter
Return
5
Press the EXIT (
) button to exit.
Equalizer
T V
If you make any changes to these settings, the sound standard is automatically
➢
R
L
switched to Custom
.
100 300 1K 3K 10K
Move
Adjust
Return
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Sound Settings (depending on the model)
◆
SRS TruSurround XT
Sound
T V
T V
T V
T V
TruSurround XT is a patented SRS technology that solves the problem of playing
5.1 multichannel content over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel
formats.
Mode
Equalizer
:
Custom
SRS TruSurround XT : Off
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
◆
Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when
the modulation signal is low.
Move
Enter
Return
Sound
Mode
Equalizer
SRS TruSurround XT : Off
:
Custom
◆
◆
Turbo Sound
This feature suitably emphasizes both higher and lower bands of sound (and
includes other effects). You can enjoy more magnificent and dynamic sound when
watching music, movie or other channels.
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
Pseudo Stereo
Move
Enter
Return
Pseudo Stereo feature converts a monaural sound signal into two identical left
and right channels. Once the Pseudo Stereo is set to On or Off, these settings
apply to the sound effects such as Standard
,
Music, Movie, and Speech.
Sound
Mode
Equalizer
SRS TruSurround XT : Off
:
Custom
1
2
Press the MENU ( ) button to display the menu.
Press the ▲ or ▼ button to select Sound, then press the ENTER (
button.
)
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
3
4
Press the ▲ or ▼ button to select the required option (SRS TruSurround
XT Auto Volume Turbo Sound, or Pseudo Stereo), then press the
ENTER ( ) button.
,
,
Move
Enter
Return
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
) button.
Sound
(
Mode
Equalizer
SRS TruSurround XT : Off
:
Custom
5
Press the EXIT (
) button to exit.
◆
You can select the turbo sound feature simply by pressing the TURBO
button.
➢
Auto Volume
Turbo Sound
Pseudo Stereo
: Off
: Off
: Off
◆
◆
◆
SRS TruSurround XT and Turbo Sound can not be both set to “On”.
You can select these options simply by pressing the SRS ( ) button.
TruSurround XT, SRS and ( ) Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
Move
Enter
Return
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ”or “Stereo”, depending on the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular + NICAM
Mono
Mono
NICAM
Mono
(Normal)
↔
↔
NICAM
Stereo
Stereo
NICAM
Mono
(Normal)
NICAM Stereo
Dual-I
NICAM
Dual-II
NICAM
Mono
(Normal)
NICAM Dual-I/II
→
→
Regular broadcast
(Standard audio)
Mono (Normal)
A2
Stereo
Bilingual or Dual-I/II
Dual-I
Stereo
Dual-II
Mono
(Forced mono)
↔
↔
Stereo
◆
If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono
.
➢
◆
◆
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono
.
When receiving a mono sound in the AV mode, connect to the “AUDIO-L”input connector on the panel (front or side).
If the mono sound comes out only from left speaker, press the DUAL I-II button.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Description
Setting the Time
Setting and Displaying the Current Time
Time
:-- :--
:Off
:Off
:Off
T V
You can set the television’s clock so that the current time is displayed by pressing the
INFO ( ) button. You must also set the time if you wish to use the automatic on or
off timers.
Clock Set
Sleep Timer
On Timer
Off Timer
When pressing the “ ”button (On/Off) on the television, the clock setting will
be reset.
➢
1
2
Press the MENU ( ) button to display the menu.
Move
Enter
Return
Press the ▲ or ▼ button to select Setup, then press the ENTER (
button.
)
Clock Set
T V
3
Press the ▲ or ▼ button to select Time, then press the ENTER (
)
button.
Hour Minute
00 00
4
5
Press the ENTER (
) button again.
Press the ◄ or ► button to move to Hour or Minute. Set the hour or
minute by pressing the ▲ or ▼ button.
6
7
Press the ENTER (
) button.
Move
Adjust
Return
Time
Press the EXIT (
) button to exit.
T V
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset interval.
Clock Set
Sleep Timer
On Timer
:00 :00
:Off
:Off
1
2
Press the MENU ( ) button to display the menu.
Off Timer
:Off
Press the ▲ or ▼ button to select Setup, then press the ENTER (
)
button.
3
4
5
Press the ▲ or ▼ button to select Time, then press the ENTER (
button.
)
Move
Enter
Return
Time
Press the ▲ or ▼ button to select Sleep Timer, then press the ENTER
) button.
T V
(
Clock Set
Sleep Timer
On Timer
:00 :00
Off
:
:
:
Press the ▲ or ▼ button to select the preset time interval (Off
60min 90min 120min 150min 180min) for staying on, then press the
) button.
,
30min,
30min
60min
,
,
,
,
90min
120min
Off Timer
ENTER (
150min
180min
6
Press the EXIT (
) button to exit.
You can select a time period of between 30 and 180 minutes after the
television automatically switches to standby mode by pressing the SLEEP
button.
Move
Enter
Return
➢
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Television On and Off Automatically
Time
:00 :00
:Off
:Off
:Off
T V
You can set the On/Off timers so that the television will:
Clock Set
Sleep Timer
On Timer
◆
Switch on automatically and tune to the channel of your choice at the time you
select
Off Timer
◆
Switch off automatically at the time you select
The first step is to set the television’s clock (refer to “Setting and Displaying the
Current Time”on the page 24). If you have not yet set the clock, the message Set
the clock first is displayed.
➢
Move
Enter
Return
1
2
Press the MENU ( ) button to display the menu.
On Timer
T V
Press the ▲ or ▼ button to select Setup, then press the ENTER (
button.
)
Hour Minute
00 00
Prog. Volume
P 1 10
Activation
No
3
4
5
6
Press the ▲ or ▼ button to select Time, then press the ENTER (
button.
)
Press the ▲ or ▼ button to select On Timer, then press the ENTER (
button.
)
Move
Adjust
Return
Time
Press the ◄ or ► button to move to Hour Minute, Prog., or Volume.
,
Set these by pressing the ▲ or ▼ button.
T V
Press the ◄ or ► button to move to Activation, then press the ▲ or ▼
button to select Yes
.
Clock Set
Sleep Timer
On Timer
:00 :00
:Off
:22 : 00
:Off
7
8
Press the MENU ( ) button.
Off Timer
Press the ▲ or ▼ button to select Off Timer. In the same above, set the
time at which you wish the television to be switched off automatically.
9
Press the EXIT (
) button to exit.
Move
Enter
Return
You can set the hour and minute directly by pressing the numeric buttons on
the remote control.
➢
Off Timer
T V
Absent Power Off
When you set the timer “On”, your television will eventually be turned off, if
➢
Hour Minute
00 00
Activation
No
you do not operate any controls during the 3 hours after the TV is turned on by
timer. This function is available in only the timer “On”mode and will prevent a
leakage accident or overheating, caused by your TV left on for a long time due
to the timer “On” (when you are away on holiday, for example).
Move
Adjust
Return
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your Language
When you start using your television for the first time, you must select the language
which will be used for displaying menus and indications.
Setup
T V
Plug & Play
Language
Time
Blue Screen
Melody
1
2
Press the MENU ( ) button to display the menu.
:
English
Press the ▲ or ▼ button to select Setup, then press the ENTER (
button.
)
:
:
On
On
3
4
5
Press the ▲ or ▼ button to select Language, then press the ENTER
(
) button.
Move
Enter
Return
Press the ▲ or ▼ button to select the appropriate language, then press
the ENTER (
) button.
) button to exit.
Press the EXIT (
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor
picture, you must set the “Blue Screen”mode to “Off”.
Setup
T V
Plug & Play
Language
Time
Blue Screen
Melody
:
English
1
2
Press the MENU ( ) button to display the menu.
Off
:
:
On
Press the ▲ or ▼ button to select Setup, then press the ENTER (
button.
)
On
3
4
5
Press the ▲ or ▼ button to select Blue Screen, then press the ENTER
) button.
Move
Enter
Return
(
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
) button.
(
Press the EXIT (
) button to exit.
Selecting the Melody
You can hear melody sound when the television is powered on or off.
Setup
T V
1
2
Press the MENU ( ) button to display the menu.
Plug & Play
Language
Time
Blue Screen
Melody
:
English
Press the ▲ or ▼ button to select Setup, then press the ENTER (
button.
)
:
:
On
Off
3
4
5
Press the ▲ or ▼ button to select Melody, then press the ENTER (
button.
)
On
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
) button.
Move
Enter
Return
(
Press the EXIT (
) button to exit.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature (depending on the model)
Most television stations provide written information services via teletext.
The index page of the teletext service gives you information on how to use the
service. In addition, you can select various options to suit your requirements by using
the remote control buttons.
For teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
☛
(teletext on/mix)
◆
Press to activate teletext mode after selecting the channel providing the
teletext service. Press it again to overlap the teletext with the current
broadcasting screen.
(sub-page)
Used to display the available sub-page.
◆
◆
(size)
Press to display the double-size letters in the upper half of the screen.
For lower half of the screen, press it again. To display normal screen,
press it once again.
(store)
◆
◆
Used to store the teletext pages.
(hold)
Used to hold the display on a given page if the selected page is linked
with several secondary pages which follow on automatically. To resume,
press it again.
(page up)
Used to display the next teletext page.
◆
◆
(mode)
Press to select the teletext mode (LIST/FLOF). If you press it in the LIST
mode, it switches into the List save mode. In the List save mode, you can
save teletext page into list using the
(store) button.
(page down)
Used to display the previous teletext page.
◆
◆
(index)
Used to display the index (contents) page at any time while you are
viewing teletext.
(reveal)
◆
◆
Used to display the hidden text (answers to quiz games, for example).
To display normal screen, press it again.
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different
topics covered on a teletext page are colour-coded and can be selected
by pressing the coloured buttons. Press one of them corresponding to the
required. The page is displayed with other coloured information that can
be selected in the same way. To display the previous or next page, press
the corresponding coloured button.
(cancel)
◆
Used to display the broadcast when searching for a page.
You can change teletext pages by pressing the numeric buttons on the remote control.
➢
continued...
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
The teletext pages are organized according to six categories:
Part
A
Contents
Selected page number.
B
Broadcasting channel identity.
Current page number or search indications.
Date and time.
C
D
E
Text.
Status information.
FASTEXT information.
F
Teletext information is often divided between several pages displayed in
sequence, which can be accessed by:
➢
➢
◆
◆
◆
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the TV ( ) button to exit from the teletext display.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually.
If you move the television to a different position and colour patches appear on the screen, you must:
◆
◆
◆
Switch the television off by pressing the “ ” button (On/Off) on the television
Unplug the television from the wall socket
Leave the television power-off for about 30 minutes so that the automatic degauss function can be activated,
and then press the “POWER ” button on the remote control.
If your television will be left unattended, press the “ ” button (On/Off) to turn your television off.
☛
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your
local dealer.
No sound or picture
◆
◆
◆
◆
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ”button (On/Off) and the POWER button.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
◆
◆
Check the volume.
Check whether the volume MUTE ( ) button on the remote control has been
pressed.
No picture or black and white picture
Sound and picture interference
◆
◆
Adjust the colour settings.
Check that the broadcast system selected is correct.
◆
Try to identify the electrical appliance that is affecting the television, then
move it further away.
◆
◆
Plug your television into a different mains socket.
Blurred or snowy picture, distorted sound
Remote control malfunctions
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
◆
◆
◆
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Web Site
Customer Care Centre ☎
02 201 2418
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
02 261 03 710
0900 20 200 88 (€ 0,10/Min)
231 627 22
0 801 801 881
80 8 200 128
8-800-200-0400
0850 123 989
SLOVAKIA
SPAIN
902 10 11 30
SWEDEN
U.K
08 585 367 87
0870 242 0303
8-800-502-0000
UKRAINE
AA68-03784A-04
Download from Www.Somanuals.com. All Manuals Search And Download.
|