R972
FM STEREO/AM
PLL DIGITAL
PERSONAL RADIO
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls cont.
1. Power button
8. Priority station recall button
9. FM Stereo/Mono button
10. Waveband selection button
11. Headphone socket
12. DBB switch
2. Liquid crystal display
3. Tuning control down button
4. Tuning control up button
5. Battery compartment
6. Memory button
13. Volume control
7. Memory recall button
14. Lock switch
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Display
a
b
c
d
e
i
f
g
h
a. FM Stereo indicator
b. Lock indicator
f. Auto power off indicator
g. Frequency display
c. Low battery indicator
h. Auto/Memory scan indicator
i. Frequency units
d. Memory preset indicator
e. Waveband indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
Open the battery cover (5) located on the rear of the R972 by sliding it
in the direction shown by the arrow. Insert two AAA (LR03) size
batteries into the compartment. Ensure that batteries are inserted in
accordancewiththediagramshownalongsidethebatterycompartment.
Note: Batteries should be replaced when the low battery indicator
(
) appears in the display.
During battery replacement ensure that the Lock switch (14) is in the
up (lock) position. This will prevent loss of memory presets during
battery replacement. Battery replacement should be completed within
two minutes to prevent loss of stations stored in memory presets.
If the radio is not to be used for long periods set the Lock switch (14) to
the up (lock) position, this will reduce power drain on batteries during
storage.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Lock Switch
The Lock switch (14) is used to prevent unintentional operation of the
radio.
Set the Lock switch located on the right side of the radio to the up
(locked) position. The Power and all other buttons will be disabled, this
will prevent accidental operation when the radio is packed in a suitcase
or travel bag.
To prevent accidental operation of the controls when the radio is
switched on set the Lock switch to the up (lock) position
the
symbol will appear in the display. To release the Lock
switch move the Lock switch to the down (unlock) position, the
symbol will be removed from the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Earphones
Plug the earphones supplied into
theheadphonesocket(11)located
on the right-hand side of the radio.
Aerials
Theleadconnectingearphonesto
the R972 acts as an FM aerial
when plugged into the earphone
jack. Theleadshouldbeextended
as much as possible to increase
FM reception. There is a separate
directionalaerialbuiltintotheradio
for AM reception. To achieve the
best AM reception, it may be
necessary to rotate the radio.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Scan tuning
Turn on the radio by pressing the Power button (1), select the FM or AM
band by pressing the Waveband selection button (10). Press and hold
down the Tuning up (4) or Tuning down button (3) for more than half a
second to commence scan tuning. The radio will scan the selected
waveband and stop automatically when a station is found.
Press and hold down either the Tuning up or Tuning down buttons for
more than half a second to resume scan tuning.
Manual tuning
Turn on the radio by pressing the Power button (1), select the FM or AM
band by pressing the Waveband selection button (10). The desired
station may be selected by repeatedly pressing the Tuning up (4) or
Tuning down button (3) until station of your choice is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Storing stations in preset memories
Turn on the radio by pressing the Power button (1), select the FM or AM
(MW) band by pressing the Waveband selection button (10). Tune to
thedesiredstationusingScanormanualtuningaspreviouslydescribed.
Press the Memory button (6) the Display (2) will flash ‘M’ . Whilst the
display is flashing select the desired memory position using the Tuning
up (4) or Tuning down button (3). Press the Memory button (6) to store
the station in the selected memory position. You may store up to 15
stations on FM and 6 stations on AM (MW).
Note:
If a station has been previously stored in memory pressing the Memory
button will cause both the ‘M’ and preset number digit to flash in the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Storing stations in preset memories (cont.)
If all the preset memory locations are full pushing the ‘M’ button will
cause the display to show ‘FUL’. If you still want to store a new station
press the Memory button (6) , the new station will replace the station
stored memory location 15 on FM or memory location 6 on AM.
Recalling stations from preset memories
Turn on the radio and select the FM or AM band as previously
described. Press the Memory recall button (7), the memory preset
number will flash in the display. Select the required preset memory
using the Tuning up (4) or Tuning down button (3), press the Memory
recall button to select the memory preset.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
ATS (Automatic Tuning System)
The automatic tuning system on the R972 will scan the selected
waveband and automatically store stations in the memory presets. Up
to 15 stations can be stored on the FM band and 6 on the AM (MW)
band. note: activating the ATS function will overwrite any stations
previously stored in the memory presets
Connect the earphones to the earphone socket (11). Slide the Lock
switch (14) to the unlock (down) position. Turn on the radio by pressing
the Power button (1), select the required waveband by pressing the
Waveband selection button (10).
Press and hold down both the Tuning up (4) and Tuning down (3)
buttons until the display shows ‘AUTO
SCAN’.
The R972 will scan the selected waveband and automatically store
stations in memory presets until the memories are full - 15 on FM and
6 on AM. When ATS has finished the first station found during the scan
will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Memory Scan
Turn on the radio and select the FM or AM band as previously
described. Press and hold down the Recall button until the display
shows ‘MEMO SCAN’, the radio will scan the memory presets on the
selected waveband pausing for 3-4 seconds before selecting the next
preset. When the required preset is reached press the Recall button (7)
twice to stop the memory scan.
Deleting preset memories
Ifthepresetmemoriesarefulloryouwouldliketodeleteapresetstation
proceed as follows :- Recall the preset memory you wish to delete,
presstheMemorybuttonuntilthedisplayshows‘dEL’,releaseandthen
press the Memory button, the preset station will be removed.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Changing preset station order
e.g. exchanging preset station 2 with preset station 6.
Turn on the radio and select the FM or AM band as previously
described. Press the Memory recall button (7), the memory preset
number will flash in the display. Select preset memory 2 using the
Tuning up (4) or Tuning down button (3), press the Memory button (6),
select preset memory 6 using the Tuning up (4) or Tuning down button
(3), press the Memory button to complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Priority stations
In addition to the normal preset memories up to three stations may be
stored in priority memory for easy access. Tune in to the required
station using one of the previously described methods. Press the
Memory button (6) followed by the Priority button (8). A ‘P’ will flash in
the display, select the Priority station memory 1, 2 or 3 using the Tuning
up (4) or Tuning down button (3), press the Memory button (6) the ‘P’
will stop flashing in the display indicating that the station has been
stored in Priority memory. Repeat the above procedure for the other 2
Priority memories.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Recalling Priority stations
TurnontheradiobypressingthePowerbutton(1), repeatedlypressthe
Priority (8) button to select the required Priority station.
Mono button (operates on FM only)
If the station being received is weak some hiss may be audible, to
reduce the hiss press the Mono button (6) to switch to mono mode. The
stereo indicator will be removed from the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
AM tuning step size
In Europe and other parts or the world AM tuning steps are 9kHz, in
America the AM tuning step size is 10kHz.
To change the AM tuning step size from 9KHz to 10KHz proceed as
follows:- Turn off the radio using the Power button (1). Turn on the radio
whilst holding down the Tuning up button (4). Release both buttons, the
AM tuning step size will now be 10KHz.
To change the AM tuning step size from 10KHz to 9KHz proceed as
follows:- Turn off the radio using the Power button (1). Turn on the radio
whilst holding down the Tuning down button (3). Release both buttons,
the AM tuning step size will now be 9KHz.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Auto power off
In order to save battery power the R972 is designed to automatically
switch off after 90 minutes of use, the symbol
display when the radio is switched on.
will appear in the
To disable the auto power off function, press and hold down the power
button for more than 2 seconds when turning on the radio. The symbol
will be removed from the display.
Deep Bass Boost switch
Setting the DBB switch (12) to the up (On) position will enhance bass
sounds. Return the switch to the down (Off) position to restore normal
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Specifications
Batteries
2 x AAA (LR03)
Battery Life
Approx. 22hrs using alkaline batteries
Frequency coverage MW 520 - 1710kHz
FM 87.5 - 108MHz
Output Power
Earphone Jack
5mW
3.5mm dia (Stereo)
The company reserves the right to amend the specification without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
If you need any further advice, please call our Technical Helpline on
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Imported by:-
ROBERTS RADIO LIMITED PO BOX 130 MEXBOROUGH
SOUTH YORKSHIRE S64 8YT
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the
originalowneragainstfailureduetofaultyworkmanshiporcomponentbreakdown,
subject to the procedure stated below. Should any component or part fail during
this guarantee period it will be repaired or replaced free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
Procedure:
Any claim under this guarantee should be made through the dealer from whom
the instrument was purchased. It is likely that your Roberts dealer will be able to
attend to any defect quickly and efficiently, but should it be necessary the dealer
willreturntheinstrumenttothecompany’sservicedepartmentforattention. Inthe
event that it is not possible to return the instrument to the Roberts dealer from
whom it was purchased, please contact Roberts Radio Technical Services
Department at the address shown on the rear of this manual before taking further
action.
These statements do not affect the statutory rights of a consumer.
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT
97-99 WORTON ROAD
ISLEWORTHMIDDLESEX
TW7 6EG
Issue2
Download from Www.Somanuals.com. All Manuals Search And Download.
|