PL1702
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is
subject to change without notice. This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names
are trademarks of their respective holders.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reposition or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced monitor technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device
may not cause harmful interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device
may not cause harmful interference. (2) This device must accept any interference received, including interference
that may cause undesired operation.
Canadian DOC Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean the LCD Monitor screen:
-- Power off the LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be
performed by an authorized technician.
5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD
Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
*
*
*
Monitor to PC signal cable is frayed or damaged.
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
LCD Monitor or the case is damaged.
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight
above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.
Important Recycle Instruction:
Lamp(s) inside this product contain mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose
in accordance with local, state, or federal Laws. For more information, contact the
Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information
check WWW.LAMPRECYCLE.ORG.
Contains Mercury, Dispose of Properly
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a
stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it
for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that
the Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
*
*
*
LCD Monitor
*
*
*
User's Manual
Power Cord
Base
Monitor-to-PC VGA Cable
Stereo Jack Audio Cable
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD Monitor and Base
When you open the box, take the base and put on the
desk first. Then connect the LCD Monitor and base.(See
fig.1-1 )
Figure 1-1
Viewing Angle Adjustment
+20°
The LCD Monitor is designed to allow users to have a
comfortable viewing angle. The viewing angle can be
adjusted from -5°to +20°.and the swivel angle can be
-5°
360°
adjusted to +/-360° (See fig. 1-2)
360°
Figure 1-2
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in
damaging the Monitor and Monitor stand.
M 4mmX11mm screw x 4
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull
downo the hinge to release.
Figure 1-3
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-3.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches
threaded nuts, as well as four 5 mm access holes in the plastic
covering as illustrated in Figure 1-4. These specifications meet the
VESA Flat Panel Monitor Physical Mounting Interface Standard
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using M 4mm x 11mm (L) screw for this
application.
Figure 1-4
Connecting the Display
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA
port. (See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port on
your PC.
Figure 1-5
4. Make sure connections are secure.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the AC Power
1. Connect the power cord to the LCD Monitor.(See Fig. 1-6)
2. Connect the power cord to an AC power source.
Figure 1-6
Connecting the Audio Cable
1. Connect the audio cable to the “LINE OUT “ jack on your PC's
audio card or to the front panel's “AUDIO OUT” jack of your CD
ROM drive. (See Fig. 1-7)
2. Connect the other end of the audio cable to the LCD Monitor's
" LINE IN " jack.
Figure 1-7
Setting Up the LCD Monitor
1. Make sure the AC power cord is connected to the LCD Monitor.
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™
compliance display card or software installed in your PC, the monitor can automatically reduce its power
consumption when not in use. If input from keyboard, mouse or other input devices is detected by the
computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving mode, the
monitor screen will be blank and the power LED indicator will light yellow.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Controls
User Controls
A brief description and the location of all LCD Monitor functions controls and indicators:
Figure 2-1
Power LED will be Green when the monitor is on, Yellow when in power
saving mode, and Dark when the monitor is off.
Press this button to turn on and turn off the monitor.
1
Function select (clockwise)
2
3
4
5
Function select (counter-clockwise)
Audio Volume increase (For PL1700M only) / Adjust increase.
Auto adjust (When OSD/Volume control is not activated) / Audio Volume
decrease (For PL1700M only) / Adjust decrease
Adjusting the Monitor's Display
The monitor has four function control buttons to select among functions shown on OSD menu, designed for
easy user-viewing environments.
OSD Function Menu
To access OSD Main menu, simply press
and
Function Select control buttons, and the menu diagram will
pop up on the screen as shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll through
the entire menu items, then press Adjustment Control buttons
to adjust content of selected item.
Figure 2-2
Attention
Firmware revision may have been updated into a latest version while the version number shown on all OSD
menus in this manual will stay as Ver. 1.00.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Description
Icon
Function
Function Description
101 scales of brightness are available to choose from (0 to 100).
Brightness
101 scales of contrast are available to choose from (0 to 100).
This function let's you adjust the display's horizontal position.
This function let's you adjust the display's vertical position.
Contrast
H. Position
V. Position
This function let's you set the transparency of the OSD menu. The transparency is
adjustable from 0 to 10. 11 scales are available.
OSD Transparency
Phase
A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the display.
This function carries a frequency-tracking feature that offers users better stability
and clarity. 101 scales (from -50 to +50) are available on the mode that is
currently running. The adjustable range can be variable in different modes. This
function records the deviated number of clock period between input timing and
supported timing. The clock value may not be ”0” after Auto Adjustment when
the input timing is different from supported timing.
Clock
Push the
or
button to select a different color temperature. Please see
Color Temperature
OSD H. Position
OSD V. Position
the diagram below for function and description.
This function moves the OSD menu window horizontally.
This function moves the OSD menu window vertically.
Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400 70Hz, are
the same, this function let's you manually select either 640 x 400 (graphics
mode), or 720 x 400 (text mode).
Graph / Text
Recall
The recall function will return all adjusted parameters to factory preset values.
Nine OSD language options are available:
English, German, French, Spanish, Italian, Japan, Russian, Simplified Chinese and
Traditional Chinese.
Language
Press the
or
adjustment control button to select other language.
The Auto Adjustment function let you adjust the display size, clock and phase to
obtain the best viewing settings. This process will take 3 ~ 5 seconds to
complete. Attention: After Auto Adjustment, the display might display wrong
position or size, if it has received a pattern which has no screen border.
Auto Adjustment
Exit
Saves the values of this setting and exits the OSD menu function.
Icon
Function
Description
CIE coordinated Color Temperature of 9300°K
CIE coordinated Color Temperature of 7500°K
CIE coordinated Color Temperature of 6500°K
Sets the CIE coordinate color temperature to 9300°K
Sets the CIE coordinate color temperature to 7500°K
Sets the CIE coordinate color temperature to 6500°K
9300
7500
6500
Three colors (Red, Green, Blue) can be
adjusted from the OSD menu
Sets the settings to a user defined CIE Temperature.
User
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Lock Out Function
When monitor is in normal display, you can enable the “OSD Lock Out” function.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
,
and
Press and hold the
buttons for same time 3 seconds to lock the buttons.
The monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear
automatically.
Repeat this step to unlock.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the
and
buttons for same time 3 seconds to lock all 5 buttons.
The monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear
automatically.
Repeat this step to unlock
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
Specifications
LCD Panel
Size
17" (43 cm)
Display Type
Resolution
Active matrix color TFT LCD
1280 x 1024
Display Dot
1280 x (RGB) x 1024
337.92 x 270.336 (H x V)
16.7M (RGB 6 bits+FRC)
660 Vrms
Display Area (mm)
Display Color
Lamp Voltage (typical)
Lamp Current (typical)
7.5 mA rms.
Video
Input Signal
Input Impedance
Polarity
Analogue RGB 0.7Vp-p
75 Ohm 2%
Positive, Negative
Amplitude
0 - 0.7 0.05 Vp
Multi-mode Supported
Horizontal Frequency: 30 ~ 80 kHz
Vertical Frequency: 56 ~ 75 Hz
Control
Power switch
On/Off switch with LED indicator
OSD
Brightness
Digital
Contrast
Digital
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Clock
Digital
Display Mode Setup
OSD Format
Use EEPROM to save settings in memory
26 characters x 15 rows
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management
Mode
DPM ON
Power Consumption*
48W maximum
2W maximum
AC Input
240 VAC
240 VAC
240 VAC
240 VAC
LED Color
GREEN
Yellow
Dark
DPM OFF
DC switch off
Disconnected
1W maximum
2W maximum
Dark
Meeting VESA DPM requirements measured from AC Input end of AC power cord.
Analogue
Sync Input
Signal
Separate TTL compatible horizontal and vertical
synchronization
Polarity
Positive and negative
Supports VESA DDC2B functions
Plug & Play
External Connection
Power Input (AC input)
Video Cable
AC socket
15-pin D-sub connector
Stereo Jack
Audio Cable
Environment
Temperature
Relative
5°C to 40°C/41°F to 104°F
20% to 80%
Operating Condition:
Humidity
Temperature
-20°C to 60° C/-4°F to140° F
5% to 85%
Storage Condition:
Relative
Humidity
Power Supply (AC Input)
Input Voltage
Input Current
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.2 A maximum
Size and Weight
Dimensions
Net Weight
367 (W) x 383.4 (H) x 199 (D) mm
3.6 ± 0.3 kg
Gross Weight
5.6 ± 0.3 kg
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
FH(kHZ)
FV(HZ)
SYNC
FRONT
PORCH
(DOT/LINE) (DOT/LINE)
SYNC
TOTAL
ACTIVE
BACK
PORCH
PIXEL
WIDTH
(DOT/LINE)
POLARITY
(DOT/
LINE)
(DOT/
LINE)
FOREQ
(MHZ)
TIMING
640x350
31.469
70.087
24.83
+
–
–
–
–
+
–
–
-
800
449
848
440
800
449
800
449
800
629
800
525
864
525
832
520
840
500
900
449
1152
667
1024
625
1056
628
1040
666
1056
625
1344
806
1328
816
1328
806
1312
800
1328
803
1480
912
1480
912
1600
900
640
350
640
400
640
400
640
400
640
480
640
480
640
480
640
480
640
480
720
400
832
624
800
600
800
600
800
600
800
600
1024
768
1024
768
1024
768
1024
768
1024
768
1152
864
1152
864
1152
864
96
2
16
37
64
7
48
60
25.175
21.05
25.175
25.197
25.175
25.175
30.24
31.5
VGA-350
640x400
64
8
80
NEC PC9801
640x400
56.42
25
31.469
70.087
31.5
96
2
16
12
16
13
16
62
16
10
64
3
48
VGA-GRAPH
640x400
35
64
2
80
NEC PC9821
640X480
70.15
34
31.469
50.030
31.469
59.94
96
2
48
VESA-PAL
640x480
-
85
–
–
–
–
–
–
–
–
–
+
–
–
+
+
+
+
+
+
+
+
–
–
+
+
–
–
+
+
–
–
+
+
+
+
+
+
96
2
48
VGA-480
33
640x480
35.00
64
3
96
APPLE MAC-480
640x480
66.67
39
37.861
72.809
37.5
40
3
16
1
120
20
VESA-480-72Hz
640x480
64
3
16
1
120
16
31.5
VESA-480-75Hz
720x400
75
31.469
70.087
49.725
74.55
108
2
18
12
32
1
54
28.322
57.2832
36
VGA-400-TEXT
832x624 APPLE
MAC-800
35
64
3
224
39
800x600
35.156
56.25
72
2
24
1
128
22
SVGA
800x600
37.879
60.317
48.077
72.188
46.875
75
128
4
40
1
88
40
VESA-600-60Hz
800x600
23
120
6
56
37
16
1
64
50
VESA-600-72Hz
800x600
23
80
3
160
21
49.5
VESA-600-75Hz
1024x768
XGA
48.363
60.004
53.964
66.132
56.476
70.069
60.023
75.029
60.24
136
6
24
3
160
29
65
1024x768
COMPAQ-XGA
1024x768
VESA-768-70Hz
1024x768
VESA-768-75Hz
1024x768
APPLE MAC-768
1152x864
(60Hz)
176
4
16
8
112
36
71.664
75
136
6
24
3
144
29
96
3
16
1
176
28
78.75
80
96
3
32
3
176
29
75.02
54.054
59.270
63.851
70.012
67.50
96
3
40
13
32
1
192
32
80
1152x864
(70Hz)
96
3
200
44
94.499
108.00
1152x864
(75Hz)
128
2
64
2
256
32
75.00
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1280x960
(60Hz)
60.00
60.00
70.00
70.00
75.00
75.00
64
+
+
+
+
+
+
+
+
+
+
1800
1000
1800
1000
1800
1000
1688
1066
1688
1066
1280
960
112
3
96
1
312
36
108.00
126.00
135.00
108
1280x960
(70Hz)
1280
960
112
3
96
1
312
36
1280x960
(75Hz)
1280
960
112
3
96
1
312
36
1280x1024VESA-1
024-60Hz
1280
1024
1280
1024
112
3
48
1
248
38
60
1280x1024VESA-1
024-75Hz
80
144
3
16
1
248
38
135
75
Note: Modes 640x350, 640x400 and 720x400 is centered in the middle of the display and cannot be expanded
to full screen.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display
mode or new VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps:
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment, except Windows XP. In
Windows XP open the specific application where the problems appear.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured and the system is
running on the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment
Control button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly
with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be
out of the LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing
Table or replace the VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~
80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display an “Out of Range” message. Choose a mode that is
supported by your LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a
message “No Input Signal”.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the benefits of your Planar product
and services, register your Planar product today.
Visit our website to register your product at
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,
Technical Support
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting.
To speak with Planar Customer Support please have you model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HDPNRD3700I
Download from Www.Somanuals.com. All Manuals Search And Download.
|