Pioneer Home Theater System HTZ656DVD User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
This product is a class 1 laser product, but this product  
contains a laser diode higher than Class 1.  
To ensure continued safety, do not remove any covers or  
attempt to gain access to the inside of the product.  
Refer all servicing to qualified personnel.  
The following caution label appears on your unit.  
Location: top of the unit  
CLASS 1  
LASER PRODUCT  
[Taiwanese model]  
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER  
RADIATION WHEN OPEN, AVOID  
EXPOSURE TO THE BEAM.  
VRW2159  
[All other models]  
D3-4-2-1-8_B_En  
Operating Environment  
POWER-CORD CAUTION  
Operating environment temperature and humidity:  
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH  
(cooling vents not blocked)  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power  
cord when your hands are wet as this could cause a  
short circuit or electric shock. Do not place the unit, a  
piece of furniture, etc., on the power cord, or pinch the  
cord. Never make a knot in the cord or tie it with other  
cords. The power cords should be routed such that they  
are not likely to be stepped on. A damaged power cord  
can cause a fire or give you an electrical shock. Check  
the power cord once in a while. When you find it  
damaged, ask your nearest PIONEER authorized  
service center or your dealer for a replacement. S002_En  
Do not install this unit in a poorly ventilated area, or in  
locations exposed to high humidity or direct sunlight (or  
strong artificial light)  
D3-4-2-1-7c_A_En  
If the AC plug of this unit does not match the AC  
outlet you want to use, the plug must be removed  
and appropriate one fitted. Replacement and  
mounting of an AC plug on the power supply cord of  
this unit should be performed only by qualified  
service personnel. If connected to an AC outlet, the  
cut-off plug can cause severe electrical shock. Make  
sure it is properly disposed of after removal.  
This product is for general household purposes. Any  
failure due to use for other than household purposes  
(such as long-term use for business purposes in a  
restaurant or use in a car or ship) and which  
requires repair will be charged for even during the  
warranty period.  
The equipment should be disconnected by removing  
the mains plug from the wall socket when left  
unused for a long period of time (for example, when  
K041_En  
on vacation).  
D3-4-2-2-1a_A_En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Creating a program list . . . . . . . . . . . . . . . 20  
Other functions available from the  
01 Controls and displays  
Front panel . . . . . . . . . . . . . . . . . . . . . . . . .6  
Remote control . . . . . . . . . . . . . . . . . . . . . .6  
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
program menu . . . . . . . . . . . . . . . . . . . . 21  
Searching a disc . . . . . . . . . . . . . . . . . . . . 21  
Switching subtitles . . . . . . . . . . . . . . . . . . 21  
Switching language / audio channels . . . . 21  
Zooming the screen . . . . . . . . . . . . . . . . . 22  
Switching camera angles . . . . . . . . . . . . . 22  
Displaying disc information. . . . . . . . . . . . 22  
02 Getting started  
Home theater sound setup . . . . . . . . . . . . .9  
Using the Auto MCACC setup for  
optimal surround sound . . . . . . . . . . . . . . .9  
Using the on-screen displays. . . . . . . . . . .10  
Playing discs . . . . . . . . . . . . . . . . . . . . . . .10  
Basic playback controls. . . . . . . . . . . . . .11  
Resume and Last Memory. . . . . . . . . . . .11  
DVD-Video disc menus . . . . . . . . . . . . . .11  
Video CD/Super VCD PBC menus . . . . . .12  
Listening to the radio . . . . . . . . . . . . . . . . .12  
Improving poor FM reception . . . . . . . . .12  
Reducing AM reception noise . . . . . . . . .12  
Memorizing stations . . . . . . . . . . . . . . . .13  
Listening to station presets . . . . . . . . . . .13  
Listening to other sources . . . . . . . . . . . . .13  
05 USB playback  
Using the USB interface . . . . . . . . . . . . . . 23  
Basic playback controls . . . . . . . . . . . . . . 23  
Scanning files . . . . . . . . . . . . . . . . . . . . . . 24  
Playing a JPEG slideshow . . . . . . . . . . . . . 24  
Browsing files with the Navigator . . . . . . . 24  
06 Surround sound settings  
Using the Setup menu . . . . . . . . . . . . . . . 25  
07 Video Adjust menu  
Video Adjust menu . . . . . . . . . . . . . . . . . . 26  
08 Initial Settings menu  
03 Listening to your system  
Using the Initial Settings menu . . . . . . . . . 27  
Video Output settings . . . . . . . . . . . . . . . . 27  
Language settings. . . . . . . . . . . . . . . . . . . 28  
Display settings. . . . . . . . . . . . . . . . . . . . . 28  
Options settings . . . . . . . . . . . . . . . . . . . . 29  
Parental Lock . . . . . . . . . . . . . . . . . . . . . 29  
About DivX® VOD content . . . . . . . . . . . 30  
Auto listening mode . . . . . . . . . . . . . . . . .14  
Listening in surround sound . . . . . . . . . . .14  
Dolby Pro Logic II Music settings . . . . . .14  
Using Advanced Surround. . . . . . . . . . . . .15  
Listening in stereo . . . . . . . . . . . . . . . . . . .15  
Listening with headphones . . . . . . . . . . . .15  
Listening with Acoustic Calibration EQ . . .15  
Using the Sound Retriever. . . . . . . . . . . . .15  
Enhancing dialog. . . . . . . . . . . . . . . . . . . .16  
Using the Tone controls. . . . . . . . . . . . . . .16  
Adjusting the bass and treble . . . . . . . . .16  
Quiet and Midnight modes . . . . . . . . . . .16  
Boosting the bass level . . . . . . . . . . . . . . .16  
09 Other connections  
Connecting external antennas. . . . . . . . . . 31  
Connecting auxiliary audio  
components . . . . . . . . . . . . . . . . . . . . . . . 31  
Connecting the S-video output . . . . . . . . . 31  
Connecting using the component  
video output . . . . . . . . . . . . . . . . . . . . . . . 32  
About progressive scan video . . . . . . . . . 32  
Using this unit with a Pioneer  
plasma display . . . . . . . . . . . . . . . . . . . . . 32  
SR+ Setup for Pioneer plasma  
displays. . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Switching on the SR+ mode. . . . . . . . . . 33  
Connecting using HDMI . . . . . . . . . . . . . . 34  
Switching the HDMI audio setting . . . . . 34  
Resetting the HDMI connection . . . . . . . 34  
About HDMI . . . . . . . . . . . . . . . . . . . . . . . 35  
04 Disc playback features  
Scanning discs . . . . . . . . . . . . . . . . . . . . .17  
Playing in slow motion. . . . . . . . . . . . . . . .17  
Frame advance/frame reverse . . . . . . . . . .17  
Playing a JPEG slideshow . . . . . . . . . . . . .17  
Browsing DVD or Video CD/Super VCD  
discs with the Disc Navigator . . . . . . . . . .18  
Browsing WMA, MP3, MPEG-4 AAC,  
DivX video and JPEG files with the  
Disc Navigator . . . . . . . . . . . . . . . . . . . . . .19  
Looping a section of a disc . . . . . . . . . . . .19  
Using repeat play. . . . . . . . . . . . . . . . . . . .19  
Using random play . . . . . . . . . . . . . . . . . .20  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Additional information  
Optional system settings . . . . . . . . . . . . . 36  
Setting the sleep timer . . . . . . . . . . . . . . . 37  
Dimming the display . . . . . . . . . . . . . . . . 37  
Disc / content format playback  
compatibility . . . . . . . . . . . . . . . . . . . . . . 37  
Disc compatibility table . . . . . . . . . . . . . 38  
About DVD+R/DVD+RW  
compatibility . . . . . . . . . . . . . . . . . . . . . 38  
About DivX. . . . . . . . . . . . . . . . . . . . . . . 39  
About MPEG-4 AAC . . . . . . . . . . . . . . . . 39  
About WMA. . . . . . . . . . . . . . . . . . . . . . 39  
Using and taking care of discs . . . . . . . . . 40  
DVD Video regions. . . . . . . . . . . . . . . . . 40  
Installation and maintenance. . . . . . . . . . 40  
Hints on installation. . . . . . . . . . . . . . . . 40  
Cleaning the pickup lens . . . . . . . . . . . . 41  
Problems with condensation . . . . . . . . . 41  
Moving the system unit . . . . . . . . . . . . . 41  
Screen sizes and disc formats . . . . . . . . . 41  
Troubleshooting . . . . . . . . . . . . . . . . . . . . 42  
General . . . . . . . . . . . . . . . . . . . . . . . . . 42  
DVD/CD/Video CD player. . . . . . . . . . . . 43  
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
USB connection . . . . . . . . . . . . . . . . . . 44  
HDMI connection . . . . . . . . . . . . . . . . . 44  
Error Messages . . . . . . . . . . . . . . . . . . . 45  
Resetting the system . . . . . . . . . . . . . . . . 46  
Using the language code list . . . . . . . . . . 46  
Language code list. . . . . . . . . . . . . . . . . . 47  
Country/Area code list . . . . . . . . . . . . . . . 47  
Specifications . . . . . . . . . . . . . . . . . . . . . 48  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Controls and displays  
CChaoptnert1rols and displays  
Front panel  
Remote control  
STANDBY  
/ON  
TUNER  
OPEN/CLOSE  
DVD/CD  
USB  
VOLUME  
STANDBY/ON  
DVD/CD  
USB  
(FM/AM)  
1
2
OPEN/  
CLOSE  
LINE  
11  
12  
AUDIO  
SUBTITLE  
ANGLE  
1
2
3
4
5
6
1
4
2
5
8
0
3
6
3
7
9
ZOOM  
CLEAR  
DISPLAY  
TUNE  
TOP MENU  
MENU  
9
13  
14  
4
5
SETUP  
ST  
SR  
ST  
ENTER  
TUNE  
HOME  
MENU  
7
8
RETURN  
6
7
MCACC  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
TEST TONE  
1
OPEN/CLOSE  
Opens/closes the disc tray.  
8
2
DVD/CD  
TV CONTROL  
SLEEP  
Selects the DVD/CD function and starts/  
pauses/resumes playback.  
15  
16  
17  
9
INPUT  
SHIFT  
CHANNEL VOLUME  
VOLUME  
MUTE  
3
10  
Stops playback.  
4
USB  
Selects the USB function and starts/pauses  
playback.  
1
STANDBY/ON  
5
VOLUME buttons  
Switches the system on or into standby.  
6
STANDBY/ON  
2
Function select buttons  
Switches the system on or into standby.  
Selects the source you want to listen to (DVD/  
7
USB interface  
CD, TUNER, USB, LINE).  
Connect a USB device for playback (see USB  
3
Number buttons / CLEAR / DISPLAY  
CLEAR – Clears an entry.  
playback on page 23).  
8
PHONES jack  
DISPLAY – Displays/changes disc  
information shown on-screen (page 22).  
Connect headphones.  
9
Display  
See Display below.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and displays  
01  
4
5
TOP MENU – Displays the top menu of a  
DVD disc in the play position—this may be  
the same as pressing MENU (page 11).  
10 SHIFT  
Press to access the controls highlighted in  
green.  
SHIFT+SETUP – Use to make various  
system and surround sound settings  
(page 12, 13, 25, 34 and 36).  
11 OPEN/CLOSE  
Opens/closes the disc tray.  
12 DVD controls  
Cursor, ENTER and tuning buttons  
ꢀ/ꢁ/ꢂ/ꢃ – Use the cursor buttons to  
navigate on-screen displays and menus.  
AUDIO – Selects audio channel/language  
(page 21).  
SUBTITLE– Displays/changes the subtitles  
ENTER – Selects an option or executes a  
(page 21).  
command.  
ANGLE – Changes camera angle during  
TUNE +/– – Tunes the radio.  
DVD multi-angle scene playback (page 22).  
ST +/– – Selects station presets when  
listening to the radio.  
ZOOM – Changes the screen zoom level  
(page 22).  
6
7
HOME MENU – Displays (or exits) the on-  
screen menu for Initial Settings, Play Mode  
functions, etc.  
13 MENU – Press to display a DVD disc or  
USB menu, or the Navigator (page 18 and  
24).  
SHIFT+MCACC – Starts the Auto MCACC  
setup (page 9).  
SHIFT+SR+ – Switches the SR+ mode on/  
off (page 33).  
Sound controls  
14 RETURN – Returns to a previous menu  
SOUND RETRIEVER – Press to restore CD  
quality sound to compressed audio  
sources (page 15).  
screen.  
SHIFT+TEST TONE – Outputs the test tone  
(for speaker setup) (page 25).  
SURROUND – Selects a Surround mode  
(page 14) or switches to stereo playback  
(page 15).  
15 SLEEP  
Press to set the sleep timer (page 37).  
ADVANCED – Selects a Pioneer original  
surround mode (page 15).  
16 MUTE  
Mutes the sound (press again to cancel).  
SOUND – Accesses the sound menu to  
adjust the tone, bass and treble, etc.  
(page 14 to 16).  
17 VOLUME +/–  
Adjusts the volume.  
8
Playback controls  
See Basic playback controls on page 11, Disc  
playback features on page 17 and USB playback  
on page 23 for an explanation of these  
controls.  
9
TV CONTROL buttons  
These control Pioneer plasma displays.  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Controls and displays  
Display  
1
2
3
4
5
6
PRGSVE SOUND  
DTS SURR.  
RPT -1  
kHz PGM  
MHz RDM  
2D  
2PL  
14 13 12 11  
10  
9
8
7
1
DTS  
11  
Lights when sleep timer is active (page 37).  
Lights during playback of a DTS source  
(page 14).  
12  
2
PRGSVE  
Lights during playback.  
Lights when progressive scan video output is  
13 2PL II  
Lights during Dolby Pro Logic II decoding  
(page 14).  
selected (page 27).  
3
SOUND  
Lights when the Sound Retriever is active  
14  
2
D
(page 15).  
Lights during playback of a Dolby Digital  
source (page 14).  
4
SURR.  
Lights when one of the Advanced surround  
listening modes is selected (page 15).  
5
RPT and RPT-1  
RPT lights during repeat play. RPT-1 lights  
during repeat one-track play (page 19).  
6
PGM  
Lights during program play (page 20).  
7
Tuner indicators  
– Lights when a broadcast is being  
received.  
– Lights when a stereo FM broadcast is  
being received in auto stereo mode.  
– Lights when FM mono reception is  
selected.  
8
RDM  
Lights during random play (page 20).  
9
kHz / MHz  
Indicates the frequency unit shown in the  
character display (kHz for AM, MHz for FM).  
10 Character display  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
02  
Chapter 2  
Getting started  
Important  
Home theater sound setup  
• These test tones are loud; however, do not  
turn the volume down during setup as this  
may result in a sub-optimal calibration.  
Place your speakers as shown below for  
optimal surround sound (see the Speaker  
Setup Guide for more placement tips).  
• Make sure the mic and speakers are not  
moved during the MCACC setup.  
Standard surround 5-spot setup – This is  
a standard multichannel surround sound  
speaker setup for optimal 5.1 channel  
home theater sound.  
ZOOM  
CLEAR  
DISPLAY  
0
TV CONTROL  
SLEEP  
MUTE  
TUNE  
TOP MENU  
MENU  
INPUT  
SHIFT  
CHANNEL VOLUME  
STANDBY  
/ON  
TUNER  
DVD/CD  
USB  
(FM/AM)  
SETUP  
ST  
SR  
OPEN/  
CLOSE  
VOLUME  
Center  
Front left  
Front right  
ST  
ENTER  
LINE  
HOME  
MENU  
RETURN  
AUDIO  
SUBTITLE  
ANGLE  
MCACC  
SOUND  
TUNE  
TEST TONE  
1
4
7
2
5
8
3
6
9
Subwoofer  
RETRIEVER SURROUND ADVANCED SOUND  
Listening position  
ZOOM  
Surround  
left  
Surround  
right  
1
Connect the microphone to the MCACC  
MIC jack on the rear panel.  
After placing your speakers, see Using the  
Auto MCACC setup for optimal surround sound  
below to complete your surround setup.  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
AM LOOP  
MCACC  
IN  
S-VIDEO  
Y
VIDEO OUT  
MIC  
HDMI OUT  
CONTROL  
Using the Auto MCACC setup for  
optimal surround sound  
2
Place the microphone at your normal  
listening position.  
Place it about ear height, and make sure it is  
level by using a table or chair.  
The Multichannel Acoustic Calibration  
(MCACC) system measures the acoustic  
characteristics of your listening area, taking  
into account ambient noise and testing for  
channel delay and channel level. After you  
have set up the microphone provided with your  
system, the receiver uses the information from  
a series of test tones to optimize the speaker  
settings and equalization (Acoustic Calibration  
Make sure there are no obstacles between the  
speakers and the microphone.  
3
If the system is off, press  
STANDBY/ON to turn the power on.  
If the tuner is selected, switch the input source.  
4
Press SHIFT+MCACC.  
1
EQ) for your particular room.  
Try to be as quiet as possible after pressing  
SHIFT+MCACC. The volume increases  
automatically and the system outputs a series  
of test tones.  
Note  
1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Getting started  
• Press SHIFT+MCACC to cancel and revert  
to the previous Auto MCACC settings.  
Button  
What it does  
ꢂꢀꢁꢃ Changes the highlighted menu item  
• If the noise level is too high, NOISY blinks  
Selects the highlighted menu item  
ENTER  
in the display for five seconds. To exit and  
1
check the noise levels , press  
Returns to the main menu without  
saving changes  
RETURN  
SHIFT+MCACC, or to try again, press  
ENTER when RETRY shows in the display.  
• If you see an ERR MIC or ERR SP message  
in the display, there may be a problem with  
your mic or the speaker connections. To try  
Tip  
• The button guide at the bottom of every  
OSD screen shows you which buttons  
you’ll need to use for that screen.  
2
again, press ENTER when you see RETRY .  
When the MCACC setup is complete, the  
volume level returns to normal and  
3
Playing discs  
COMPLETE shows in the display, indicating  
that the MCACC setup is complete and  
Acoustic Calibration EQ has been activated.  
The basic playback controls for playing DVD,  
CD, Video CD/Super VCD, DivX video and  
WMA/MP3/MPEG-4 AAC discs are covered  
here. Further functions are detailed in chapter 4.  
4
Using the on-screen displays  
1
If the player isn’t already on, switch it on.  
For ease of use, this system makes extensive  
use of graphical on-screen displays (OSDs).  
If you’re playing a disc with video, also turn on  
your TV and make sure that it is set to the  
correct video input.  
All the screens are navigated in basically the  
same way, using , , , to change the  
highlighted item and pressing ENTER to select  
2
Press OPEN/CLOSE to load a disc.  
Load a disc with the label side facing up, using  
the disc tray guide to align the disc (if you’re  
loading a double-sided DVD disc, load it with  
the side you want to play face down).  
5
it.  
Important  
• Throughout this manual, ‘Select’ means  
use the cursor buttons to highlight an item  
on-screen, then press ENTER.  
Button  
What it does  
Displays/exits the on-screen display  
HOME  
MENU  
Note  
1 • If the room environment is not optimal for the Auto MCACC setup (too much ambient noise, echo off the walls, obstacles  
blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air condition-  
er, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary.  
• Some older TVs may interfere with the operation of the mic. If this seems to be happening, switch off the TV during the Auto  
MCACC setup.  
2 If this doesn’t work, press SHIFT+MCACC, turn off the power, and check the problem indicated by the ERR message, then try  
the Auto MCACC setup again.  
3 If COMPLETE doesn’t appear, it is likely an error occurred during the setup. Please check all connections and try again.  
4 See Listening with Acoustic Calibration EQ on page 15 to switch on/off Acoustic Calibration EQ.  
5 The screen saver will appear after five minutes of inactivity.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
02  
3
Press  
(play) to start playback.  
Button What it does  
If you’re playing a DVD or Video CD/Super VCD,  
a menu may appear. See DVD-Video disc  
menus and Video CD/Super VCD PBC menus on  
page 12 to navigate these.  
Numbers Use to enter a title/chapter/track  
number. Press ENTER to select.  
• If the disc is stopped, playback starts  
from the selected title (for DVD) or  
track (for CD/Video CD/Super VCD).  
• If the disc is playing, playback jumps  
to the start of the selected title (VR  
mode DVD-RW), chapter (DVD-Video)  
or track (CD/Video CD/Super VCD).  
If you loaded a disc containing JPEGs, a  
slideshow will start. See Playing a JPEG  
slideshow on page 17 for more on this.  
• If a disc contains a mixture of DivX video  
and other media file types (MP3, for  
example), first select whether to play the  
DivX video files (DivX) or the other media  
file types (MP3 / WMA / JPEG / MPEG-4  
AAC) from the on-screen display.  
Resume and Last Memory  
When you stop playback of a disc, RESUME  
shows in the display indicating that you can  
resume playback from that point.  
4
Adjust the volume.  
With DVDs and Video CD/Super VCDs, even if  
Use the VOLUME control.  
2
ejected, the play position is stored in memory.  
The next time you load the disc, the display  
shows LAST MEM and you can resume play-  
back.  
If you want to clear the resume point, press ꢂ  
(stop) while RESUME is displayed.  
Basic playback controls  
The following table shows the basic controls on  
the remote for playing discs . You can find  
other playback features in the chapter 4.  
1
Button What it does  
DVD-Video disc menus  
Many DVD-Video discs contain menus from  
which you can select what you want to watch.  
Starts/resumes normal playback.  
If the display shows RESUME or  
LAST MEM playback starts from the  
resume or last memory point (see  
Resume and Last Memory below).  
Sometimes DVD-Video menus are displayed  
automatically when you start playback; others  
only appear when you press MENU or TOP  
MENU.  
Pauses/unpauses a disc.  
Stops playback or cancels the resume  
function (if the display shows RESUME).  
Button  
What it does  
Press to start fast reverse scanning.  
Press to start fast forward scanning.  
Displays the ‘top menu’ of a DVD  
disc—this varies with the disc.  
TOP MENU  
Displays a DVD disc menu—this  
varies with the disc and may be  
the same as the ‘top menu’.  
MENU  
Skips to the start of the current track or  
chapter, then previous tracks/chapters.  
Skips to the next track or chapter.  
ꢂꢀꢁꢃ  
Moves the cursor around the  
screen.  
Note  
1 You may find with some DVD discs that some playback controls don’t work in certain parts of the disc.  
2 • The Last Memory function may not work with some discs.  
• For DVD-Video discs (except VR mode DVD-R/RW), the player stores the play position of the last five discs.  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Getting started  
Auto tuning: Press and hold TUNE +/–  
until the frequency display starts to move,  
then release. The tuner will stop on the next  
station it finds. Repeat to keep searching.  
Button  
What it does  
Selects the current menu option.  
ENTER  
Returns to the previously  
displayed menu screen.  
RETURN  
High-speed tuning: Press and hold TUNE  
+/– until the frequency display starts to  
move rapidly. Keep the button held down  
until you reach the frequency you want. If  
necessary, fine tune the frequency using  
the manual tuning method.  
Numbers  
Highlights a numbered menu  
option (some discs only). Press  
ENTER to select.  
Video CD/Super VCD PBC menus  
Some Video CD/Super VCDs have menus from  
which you can choose what you want to watch.  
These are PBC (Playback control) menus.  
Improving poor FM reception  
If you’re listening to an FM station in stereo but  
the reception is weak, you can improve the  
sound quality by switching to mono.  
You can play a PBC Video CD/Super VCD  
without having to navigate the PBC menu by  
starting playback using a number button to  
select a track, rather than the (play) button.  
1
Tune to an FM radio station then press  
SHIFT+SETUP  
.
2
Use ꢂ/ꢃ to choose FM MODE then press  
Button  
What it does  
ENTER  
.
Displays the PBC menu.  
RETURN  
Numbers  
3
Use ꢀ/ꢁ to select FM MONO then press  
Selects numbered menu options.  
Press ENTER to select.  
ENTER  
.
The mono indicator ( ) lights when the tuner  
Displays the previous menu page  
(if there is one).  
is in mono reception mode.  
Select FM AUTO above to switch back to auto-  
stereo mode (the stereo indicator ( ) lights  
when receiving a stereo broadcast).  
Displays the next menu page (if  
there is one).  
Reducing AM reception noise  
If AM reception seems particularly poor, or the  
AM radio station you’re listening to seems  
noisy, try using the Noise Cut feature for better  
sound quality.  
Listening to the radio  
The tuner can receive both FM and AM  
broadcasts, and lets you memorize your  
favorite stations so you don’t have to manually  
tune in every time you want to listen.  
1
Tune to an AM radio station then press  
SHIFT+SETUP  
.
1
Press TUNER to switch to the tuner, then  
press repeatedly to select the AM or FM band.  
The display shows the band and frequency.  
2
Use ꢂ/to choose NOISECUT then press  
ENTER  
.
2
Tune to a frequency.  
3
Use ꢀ/ꢁto select the noise cut mode then  
press ENTER  
Select an effect level between 1 and 3.  
There are three tuning modes—manual, auto,  
and high-speed:  
.
Manual tuning: Press TUNE +/–  
repeatedly to change the displayed  
frequency.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
02  
Memorizing stations  
You can save up to 30 station presets so that  
you always have easy access to your favorite  
stations without having to tune in manually  
each time.  
1
Tune to an AM or FM radio station.  
Select mono or auto-stereo reception (FM) or  
the Noise Cut mode (AM) as necessary. These  
settings are saved along with the preset.  
2
Press SHIFT+SETUP and use ꢂ/ꢃ to  
choose ‘ST.MEM.’ then press ENTER  
.
3
Use ꢀ/ꢁ to select the station preset you  
want then press ENTER  
.
Listening to station presets  
1
Make sure the TUNER function is selected.  
2
Use the ST +/– buttons to select a station  
preset.  
• You can also use the number buttons to do  
this.  
Listening to other sources  
You can connect auxiliary sources (TV, satellite  
receiver, etc.) to this unit for playback through  
the speaker system. See Connecting auxiliary  
audio components on page 31 for more on this.  
• To connect a USB device to the USB  
terminal, see USB playback on page 23.  
1
Make sure that the external source (TV,  
satellite receiver, etc.) is switched on.  
2
3
Press LINE to select the source.  
If necessary, start playback of the source.  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
Listening to your system  
Chapter 3  
Listening to your system  
MUSIC (Dolby Pro Logic II Music) – Pro  
Logic II 5.1 channel surround sound,  
especially suited to music sources (use  
with any two-channel source)  
Auto listening mode  
The Auto listening mode is the simplest way to  
listen to any source as it was mastered: the  
output from the speakers mirrors the channels  
in the source material.  
STEREO – See Listening in stereo below  
TUNE  
TEST TONE  
Dolby Pro Logic II Music settings  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
When listening in Dolby Pro Logic II Music  
mode, there are three settings you can adjust:  
Center Width, Dimension, and Panorama.  
Press SURROUND to select the AUTO  
1
listening mode.  
1
With Dolby Pro Logic II Music mode active,  
press SOUND  
.
Listening in surround sound  
2
Use ꢂ/to select ‘C WIDTH’, ‘DIMEN.’ or  
‘PANORAMA’ then press ENTER to confirm.  
C WIDTH (Center Width): Provides a better  
blend of the front speakers by spreading  
the center channel between the front right  
and left speakers, making it sound wider  
(higher settings) or narrower (lower  
settings).  
You can listen to stereo or multichannel  
2
sources in surround sound. Surround sound  
is generated from stereo sources using one of  
the Dolby Pro Logic decoding modes.  
TUNE  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
DIMEN. (Dimension): Adjusts the depth of  
the surround sound balance from front to  
back, making the sound more distant  
(minus settings), or more forward (positive  
settings).  
Press SURROUND repeatedly to select a  
1
listening mode.  
The choices that appear in the display will vary  
according to the type of source that’s playing.  
AUTO – Auto listening mode (see above)  
PANORAMA – Extends the front stereo  
image to include the surround speakers for  
a ‘wraparound' effect.  
DOLBY PL (Dolby Pro Logic) – 4.1 channel  
surround sound (use with any two-channel  
source)  
MOVIE (Dolby Pro Logic II Movie) – Pro  
Logic II 5.1 channel surround sound,  
especially suited to movie sources (use  
with any two-channel source)  
Note  
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.  
2 Note that when the tuner is selected, multichannel playback is not possible.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to your system  
Using Advanced Surround  
03  
Listening with Acoustic  
Calibration EQ  
The Advanced Surround effects can be used  
with any multichannel or stereo source for a  
You can listen to sources using the Acoustic  
Calibration Equalization set in Using the Auto  
MCACC setup for optimal surround sound on  
1
variety of additional surround sound effects.  
TUNE  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
2
page 9.  
1
Press SOUND and use ꢂ/ꢃ to select  
Press ADVANCED to select an Advanced  
MCACC EQ then press ENTER  
.
Surround mode.  
Press repeatedly to select ADVMOVIE,  
ADVMUSIC, EXPANDED, TV SURR., SPORTS,  
GAME, VIRTUAL or 5 STEREO.  
2
Use ꢀ/ꢁ to select EQ ON or EQ OFF then  
press ENTER to confirm  
.
• If you select EQ OFF, equalization is set to  
off but speaker settings (channel delay and  
channel level) remain in effect.  
Listening in stereo  
EQ ON is selected automatically after the  
Auto MCACC setup is completed.  
You can listen to any source—stereo or  
multichannel—in stereo. When playing a  
multichannel source, all channels are  
downmixed to the front left/right speakers and  
the subwoofer.  
Using the Sound Retriever  
When audio data is removed during the WMA/  
MP3/MPEG-4 AAC compression process,  
sound quality often suffers from an uneven  
sound image. The Sound Retriever feature  
employs new DSP technology that helps bring  
CD quality sound back to compressed 2-  
channel audio by restoring sound pressure  
and smoothing jagged artifacts left over after  
compression.  
TUNE  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
Press SURROUND repeatedly until  
STEREO shows in the display.  
Listening with headphones  
When headphones are connected, only the  
STEREO (default) and PHONES SURROUND  
(virtual surround sound for headphones)  
modes are available.  
While listening to a stereo source, press  
SOUND RETRIEVER to switch the sound  
retriever on or off.  
With headphones connected, press  
ADVANCED to select PHONES SURROUND  
or SURROUND to select STEREO.  
Note  
1 Note that when the tuner is selected, multichannel playback is not possible.  
2 Acoustic Calibration EQ is not available when headphones are connected.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
Listening to your system  
Enhancing dialog  
Boosting the bass level  
The Dialog Enhancement feature is designed  
to make the dialog stand out from other  
background sounds in a TV or movie  
soundtrack.  
There are two bass modes you can use to  
1
enhance the bass in a source.  
1
Press SOUND and use ꢂ/ꢃ to select  
BASSMODE then press ENTER  
.
1
Press SOUND and use ꢂ/ꢃ to select  
2
Use ꢀ/ꢁ to adjust the sound then press  
ENTER to confirm  
Select between OFF, MUSIC or CINEMA.  
DIALOGUE then press ENTER  
.
.
2
Use ꢀ/ꢁ to select the amount of dialog  
enhancement then press ENTER to confirm.  
Select between OFF, MID or MAX.  
Using the Tone controls  
You can change the tonal balance of the sound  
by using the tone control menu.  
1
Press SOUND and use ꢂ/ꢃ to select  
TONE then press ENTER  
.
2
Use ꢀ/ꢁ to select the option you want to  
adjust and press ENTER  
.
The Bass/Treble, Quiet and Midnight features  
cannot be used at the same time.  
Adjusting the bass and treble  
Use the tone controls to adjust the bass and  
treble.  
Use ꢂ/ꢃ to select BASS or TREBLE then  
use ꢀ/ꢁ to adjust the tone. Press ENTER to  
confirm  
.
Quiet and Midnight modes  
The Quiet listening feature reduces excessive  
bass or treble in a sound source.  
The Midnight listening feature allows you to  
hear effective surround sound of movies at low  
volume levels.  
After pressing ENTER, the setting  
switches on/off.  
• To cancel the Quiet or Midnight listening  
modes, select BASS/TRE.  
Note  
1 The Bass Mode is not available when headphones are connected.  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc playback features  
04  
Chapter 4  
Disc playback features  
1
During playback, press  
(pause).  
Important  
2
Press and hold ꢊ/or ꢌ/until slow  
• Many of the functions covered in this  
chapter apply to DVD discs, Video CDs/  
Super VCDs, CDs, DivX video and WMA/  
MP3/MPEG-4 AAC/JPEG discs, although  
the exact operation of some varies slightly  
with the kind of disc loaded.  
motion playback starts.  
Press repeatedly to change the slow motion  
speed (shown on-screen).  
2
• To resume playback, press (play).  
• Some DVDs restrict the use of some  
functions (random or repeat, for example)  
in some or all parts of the disc. This is not a  
malfunction.  
Frame advance/frame reverse  
You can advance or back up DVD discs frame-  
by-frame. With Video CD/Super VCDs and DivX  
video you can only use frame advance.  
• When playing Video CD/Super VCDs, some  
of the functions are not available during  
PBC playback. If you want to use them,  
start the disc playing using a number  
button to select a track.  
1
During playback, press  
(pause).  
2
Press ꢊ/ꢋ or ꢌ/ꢍ to reverse or  
advance a frame at a time.  
2
• To resume playback, press (play).  
Scanning discs  
Playing a JPEG slideshow  
You can fast-scan discs forward or backward at  
After loading a disc containing JPEG pictures,  
1
various different speeds.  
press to start a slideshow from the first  
3
During playback, press  
or  
to start  
folder/picture on the disc. The player displays  
scanning.  
the pictures in each folder in alphabetical  
order.  
Press repeatedly to increase the scanning  
speed (shown on-screen).  
• If the disc contains WMA/MP3/MPEG-4  
AAC files, playback of the slideshow and  
audio files repeats. During audio playback,  
you can still use the skip (/), scan  
(/) and pause () functions.  
2
• To resume playback, press (play).  
Playing in slow motion  
You can play DVDs, Video CD/Super VCDs and  
DivX video at four different forward slow  
motion speeds. DVD discs can also be played  
in reverse slow motion.  
Pictures are automatically adjusted so that  
they fill as much of the screen as possible.  
Note  
1 Only one speed is available for DivX video discs.  
2 • Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.  
• With Video CD/Super VCDs in PBC mode or a WMA/MP3/MPEG-4 AAC track, playback automatically resumes at the end or  
beginning of the track.  
3 • The time it takes for the player to load a file increases with large file sizes.  
• Discs can contain up to 299 folders and up to 648 folders and files combined.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Disc playback features  
While the slideshow is running:  
The options available depend on the kind of  
disc loaded and whether the disc is playing or  
not, but include:  
Button  
What it does  
Pauses the slideshow (or audio);  
press again to restart.  
Title – Titles from a DVD-Video disc.  
Chapter – Chapters from the current title  
of a DVD-Video disc.  
Jumps to the previous picture (or  
audio file with audio playback).  
Track – Tracks from a Video CD/Super VCD  
disc.  
Jumps to the next picture (or  
audio file with audio playback).  
Time – Thumbnails from a Video CD/Super  
VCD disc at 10 minute intervals.  
Pauses the slideshow and  
rotates/flips the displayed  
picture (Press (play) to restart  
slideshow).  
ꢂ/ꢃ/ꢀ/ꢁ  
Original: Title – Original titles from a VR  
mode DVD-RW disc.  
Playlist: Title – Playlist titles from a VR  
mode DVD-RW disc.  
ZOOM  
MENU  
Pauses the slideshow and zooms  
the picture. Press again to toggle  
between 1x, 2x and 4x zoom  
(Press (play) to restart  
slideshow).  
Original: Time – Thumbnails from the  
Original content at 10 minute intervals.  
Playlist: Time – Thumbnails from the  
Playlist at 10 minute intervals.  
The screen shows up to six moving thumbnail  
images displayed one after another. To display  
the previous/next six thumbnails, press /  
.  
Displays the Disc Navigator  
screen (see below).  
3
Select the thumbnail image for what  
Browsing DVD or Video CD/  
Super VCD discs with the Disc  
Navigator  
you want to play.  
01  
02  
05  
03  
06  
Use the Disc Navigator to browse through the  
contents of a DVD or Video CD/Super VCD disc  
to find the part you want to play.  
04  
Disc Navigator: Title  
01- 49: --  
1
During playback, press HOME MENU  
and select ‘Disc Navigator’ from the on-  
screen menu.  
You can use either ꢀ/ꢁ/ꢂ/ꢃ and ENTER to  
select a thumbnail, or the number buttons.  
Disc Navigator  
To select using the number buttons, enter a  
two-digit number then press ENTER.  
2
Select a view option.  
Disc Navigator  
Title  
Chapter  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc playback features  
04  
Tip  
Browsing WMA, MP3, MPEG-4  
AAC, DivX video and JPEG files  
with the Disc Navigator  
• You can also play a JPEG slideshow while  
listening to WMA/MP3/MPEG-4 AAC  
playback. Simply select the audio file you  
want to listen to followed by the JPEG from  
which you want the slideshow to start.  
Playback of both the slideshow and the  
audio files repeats. Playback controls are  
effective for the JPEG slideshow only.  
Use the Disc Navigator to find a particular file  
or folder by filename.  
1
Press HOME MENU and select ‘Disc  
Navigator’ from the on-screen menu.  
00:00/ 00:00  
0kbps  
• To play the contents of the whole disc  
rather than just the current folder, exit the  
Disc Navigator and start playback using  
the (play) button.  
Folder1  
Folder2  
Folder3  
Folder4  
Looping a section of a disc  
The A-B Repeat function allows you to specify  
two points (A and B) within a track (CD, Video  
CD/Super Video CD) or title (DVD) that form a  
loop which is played over and over.  
2
Use ꢀ/ꢁ/ꢂ/ꢃ and ENTER to navigate.  
Use ꢀ/ꢁ to move up and down the folder/file  
list.  
1
Use to return to the parent folder.  
Use ENTER or to open a highlighted folder.  
1
During playback, press HOME MENU and  
select ‘Play Mode’.  
• When a JPEG file is highlighted, a  
thumbnail image is displayed on the right.  
Play Mode  
00:00/ 00:00  
Folder2  
0kbps  
2
3
Select ‘A-B Repeat’.  
Press ENTER on ‘A(Start Point)’ to set the  
File1  
File2  
File3  
File4  
File5  
loop start point.  
4
Press ENTER on ‘B(End Point)’ to set the  
loop end point.  
After pressing ENTER, playback jumps back to  
the start point and plays the loop.  
3
To play the highlighted track or DivX  
video file or display the highlighted JPEG  
file, press ENTER.  
5
To resume normal playback, select ‘Off’.  
• When a WMA/MP3/MPEG-4 AAC or DivX  
video file is selected, playback begins from  
that file, and continues until the end of the  
folder.  
Using repeat play  
In addition to various repeat play options, it’s  
also possible to use repeat play together with  
program play (see Creating a program list on  
page 20).  
• When a JPEG file is selected, a slideshow  
begins, starting with that file, and  
continues to the end of the folder.  
Note  
1 You can also do this by going to the ‘..’ folder at the top, then pressing ENTER.  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Disc playback features  
1
During playback, press HOME MENU and  
Button  
What it does  
select ‘Play Mode’.  
Returns to the beginning of the  
current track/title/chapter;  
further presses select another  
random track/title/chapter.  
2
Select ‘Repeat’ then select a repeat play  
1
option.  
If program play is active, select Program  
Repeat to repeat the program list, or Repeat  
Off to cancel.  
• Random play remains in effect until you  
select Random Off from the random play  
menu options.  
• For DVD discs, select Title Repeat or  
Chapter Repeat.  
• For CDs and Video CD/Super VCDs, select  
Disc Repeat or Track Repeat.  
Creating a program list  
This feature lets you program the play order of  
• For DivX video discs, select Title Repeat  
(or Repeat Off).  
3
titles/chapters/tracks on a disc.  
1
During playback, press HOME MENU and  
select ‘Play Mode’.  
Using random play  
Use this function to play titles or chapters  
2
Select ‘Program’ then select ‘Create/Edit’  
(DVD-Video) or tracks (CD and Video CD/Super  
from the list of program options.  
2
VCD) in a random order.  
3
Use ꢀ/ꢁ/ꢂ/ꢃ and ENTER to select a  
1
During playback, press HOME MENU and  
title, chapter or track for the current step in  
the program list.  
select ‘Play Mode’.  
For a DVD disc, you can add a title or a chapter.  
2
Select ‘Random’ then select an option.  
• For DVD discs, select Random Title or  
Random Chapter.  
• For a CD or Video CD/Super VCD, select a  
track to add to the program list.  
After pressing ENTER to select the title/  
chapter/track, the step number automatically  
moves down one.  
• For CDs and Video CD/Super VCDs, select  
On or Off to switch random play on or off.  
4
Repeat step 3 to build up a program list.  
Tip  
A program list can contain up to 24 steps.  
• Use the following controls during random  
play:  
• You can insert steps by just highlighting  
the position where you want the new step  
to appear and entering a title/chapter/track  
number.  
Button  
What it does  
Selects a new track/title/chapter  
at random.  
• To delete a step, highlight it and press  
CLEAR.  
Note  
1 You can’t use repeat play with WMA/MP3/MPEG-4 AAC discs.  
2 • You can set the random play option when a disc is playing or stopped. However, you can't use random play together with  
program play.  
• You can’t use random play with VR format DVD-R/RW discs, WMA/MP3/MPEG-4 AAC discs, DivX video discs, or while a DVD  
disc menu is being displayed.  
3 You can’t use Program play with VR format DVD-R/RW discs, WMA/MP3/MPEG-4 AAC discs, DivX video discs, or while a DVD  
disc menu is being displayed.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc playback features  
04  
5
To play the program list, press  
(play).  
3
4
Select a search mode.  
• The disc must be playing in order to use  
time search.  
Program play remains active until you turn off  
program play (see below), erase the program  
list (see below), eject the disc or switch off.  
Use the number buttons to enter a title,  
chapter or track number, or a time.  
• For a time search, enter the number of  
minutes and seconds into the currently  
playing title (DVD/ DivX video) or track (CD/  
Video CD/Super VCD) you want playback to  
resume from. For example, press 4, 5, 0, 0  
to have playback start from 45 minutes into  
the disc. For 1 hour, 20 minutes and 30  
seconds, press 8, 0, 3, 0.  
Tip  
• Use the following controls during program  
play:  
Button  
What it does  
HOME  
MENU  
Save the program list and exit  
without starting playback.  
Skip to the next step in the  
program list.  
5
Press ENTER to start playback.  
Switching subtitles  
Other functions available from the  
program menu  
There are a number of other options in the  
program menu in addition to Create/Edit.  
Some DVD discs and DivX video discs have  
subtitles in one or more languages; the disc  
box will usually tell you which subtitle  
languages are available. You can switch  
Playback Start – Starts playback of a  
saved program list  
1
subtitle language during playback.  
Press SUBTITLE repeatedly to select a  
Playback Stop – Turns off program play,  
but does not erase the program list  
subtitle option.  
• To set subtitle preferences, see Language  
settings on page 28.  
Program Delete – Erases the program list  
and turns off program play  
• See Displaying DivX subtitle files on  
page 39 for more on DivX subtitles.  
Searching a disc  
You can search DVD discs by title or chapter  
number, or by time; CDs and Video CD/Super  
VCDs by track number or time; DivX video discs  
by time.  
Switching language / audio  
channels  
When playing discs recorded with dialog in two  
2
or more languages, or with dual-mono audio  
1
Press HOME MENU and select ‘Play  
3
Mode’.  
you can switch these during playback.  
2
Select ‘Search Mode’.  
Press AUDIO repeatedly to select an  
The search options that appear depend on the  
kind of disc loaded.  
audio language option.  
• To set audio language preferences, see  
Language settings on page 28.  
Note  
1 Some discs only allow you to change subtitle language from the disc menu. Press TOP MENU or MENU to access.  
2 Some Super VCDs have two soundtracks. With these discs you can switch between the two soundtracks as well as individual  
channels in each.  
3 Some discs only allow you to change audio language from the disc menu. Press TOP MENU or MENU to access.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Disc playback features  
Zooming the screen  
Using the zoom feature you can magnify a part  
of the screen by a factor of 2 or 4, while  
watching a DVD, DivX video title or Video CD/  
Super VCD or playing a JPEG disc.  
1
During playback, use theZOOM button to  
select the zoom factor (Normal, 2x or 4x).  
2
Use ꢀ/ꢁ/ꢂ/ꢃ to change the zoomed  
area.  
You can change the zoom factor and the  
1
zoomed area freely during playback.  
Switching camera angles  
Some DVD discs feature scenes shot from two  
or more angles—check the disc box for details.  
When a multi-angle scene is playing, a  
icon appears on screen (this can be switched  
off if you prefer—see Display settings on  
page 28).  
During playback (or when paused), press  
ANGLE to switch angle.  
Displaying disc information  
Various track, chapter and title information  
can be displayed on-screen during playback.  
To show/switch/hide the information  
displayed, press DISPLAY repeatedly.  
Limited disc information also appears in the  
front panel display. Press DISPLAY to change  
the displayed information.  
Note  
1 • Since DVD, Video CD/Super VCD, DivX video title and JPEG pictures have a fixed resolution, picture quality will deteriorate,  
especially at 4x zoom. This is not a malfunction.  
• If the navigation square at the top of the screen disappears, press ZOOM again to display it.  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB playback  
05  
Chapter 5  
USB playback  
Important  
Using the USB interface  
It is possible to listen to two-channel audio  
If a USB ERR message lights in the display, it  
may mean that the power requirements of the  
USB device are too high for this player, or that  
the device is incompatible. Try the following:  
1
and watch JPEG files using the USB interface  
on the front of this unit. Connect a USB mass  
2
storage device as shown below.  
• Switch the player off, then on again.  
1
With the player switched on, press USB.  
• Reconnecting the USB device with the  
player switched off.  
Make sure your TV is on and set to the correct  
video input.  
• Selecting to another input source (like  
DVD/CD), then back to USB.  
2
Connect your USB device.  
The USB terminal is located on the front panel.  
• Using a dedicated AC adapter (supplied  
with the device) for USB power.  
If this doesn’t remedy the problem, it is likely  
your USB device is incompatible.  
USB  
Type A  
Basic playback controls  
The following table shows the basic controls  
on the remote for USB playback.  
Button What it does  
USB mass  
storage device  
Starts normal playback.  
Pauses/unpauses playback.  
Stops playback.  
3
Press  
(play) to start playback.  
Press to start fast reverse scanning.  
Press to start fast forward scanning.  
If your USB device contains JPEGs, a  
slideshow will start. See Playing a JPEG  
slideshow on page 24 for more on this.  
Skips to the start of the current file,  
then previous files.  
• Make sure USB DATA is showing in the  
front panel display (or the system is in  
standby) when disconnecting.  
Skips to the next file.  
Note  
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback). It is not pos-  
sible to play DivX files through the USB terminal.  
2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital  
audio players (MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.  
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no  
responsibility for any loss of data that may occur when connected to this unit.  
• With large amounts of data, it may take longer for the system to read the contents of a USB device.  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
USB playback  
Scanning files  
Button  
MENU  
What it does  
Displays the Navigator screen  
(see below).  
You can fast-scan forward or backward at  
various different speeds.  
During playback, press  
or  
.  
Browsing files with the  
Press repeatedly to increase the scanning  
speed (shown on-screen).  
Navigator  
1
Use the Navigator to find WMA, MP3, MPEG-4  
• To resume playback, press (play).  
3
AAC and JPEG files or folders by name.  
1
Press MENU then use ꢀ/ꢁ/ꢂ/ꢃ and  
Playing a JPEG slideshow  
ENTER to navigate.  
Use ꢀ/ꢁ to move up/down the folder/file list.  
Press to start a slideshow from the first  
2
folder/picture. The pictures in each folder are  
4
Use to return to the parent folder.  
Use ENTER or to open a highlighted folder.  
displayed in order.  
• If the device contains WMA/MP3/MPEG-4  
AAC files, playback of the slideshow and  
audio files repeats. During audio playback,  
you can still use the skip (/), scan  
(/) and pause () functions.  
• When a JPEG file is highlighted, a  
thumbnail image is displayed on the right.  
2
To play the highlighted track or display  
the highlighted JPEG file, press ENTER.  
• When a WMA/MP3/MPEG-4 AAC file is  
selected, playback begins from that file,  
and continues until the end of the folder.  
Pictures are automatically adjusted so that  
they fill as much of the screen as possible.  
While the slideshow is running:  
• When a JPEG file is selected, a slideshow  
begins, starting with that file, and  
continues to the end of the folder.  
Button  
What it does  
Pauses the slideshow (or audio);  
press again to restart.  
Jumps to the previous picture (or  
audio file with audio playback).  
Tip  
• You can also play a JPEG slideshow while  
listening to WMA/MP3/MPEG-4 AAC  
playback. Simply select the audio file you  
want to listen to followed by the JPEG from  
which you want the slideshow to start.  
Playback of both the slideshow and the  
audio files repeats. Playback controls are  
effective for the JPEG slideshow only.  
Jumps to the next picture (or  
audio file with audio playback).  
Pauses the slideshow and  
rotates/flips the current picture  
(Press to restart slideshow).  
ꢂ/ꢃ/ꢀ/ꢁ  
ZOOM  
Pauses the slideshow and zooms  
the picture. Press again to toggle  
between 1x, 2x and 4x zoom  
• To play all of the contents, rather than just  
the current folder, exit the Navigator and  
start playback using the (play) button.  
(Press to restart slideshow).  
Note  
1 With WMA/MP3/MPEG-4 AAC tracks, playback automatically resumes at the end or beginning of the track.  
2 • The time it takes for the player to load a file increases with large file sizes.  
• USB devices can contain up to 299 folders and up to 648 folders and files combined.  
3 Filenames may be displayed incorrectly with some digital audio players.  
4 You can also do this by going to the ‘..’ folder at the top, then pressing ENTER.  
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Surround sound settings  
06  
Chapter 6  
Surround sound settings  
SL – Surround left speaker  
Using the Setup menu  
SW – Subwoofer  
The channel level range is 10 dB.  
From the Setup menu you can access all the  
1
surround sound settings of the system ,  
Speaker distance setting  
Specifies the distance from your listening  
position to your speakers.  
including channel levels, speaker distances  
and dynamic range adjustment. The Auto  
MCACC feature (page 9) should give you the  
best surround sound setup. However you may  
find that by further adjustment of the surround  
sound settings you can improve the surround  
sound in your listening room.  
When DISTANCE appears, press ENTER, then  
use ꢀ/ꢁ to adjust the distance, and ꢂ/ꢃ to  
switch between the following speakers:  
L – Front left speaker  
C – Center speaker  
1
Press SHIFT+SETUP and use ꢂ/ꢃ then  
R – Front right speaker  
SR – Surround right speaker  
SL – Surround left speaker  
SW – Subwoofer  
ENTER to choose the setting you want to  
adjust.  
The available settings are shown in the front  
2
panel display.  
Each speaker can be adjusted between 0.3 m  
and 9.0 m. The default setting is 3.0 m.  
2
Use ꢀ/ꢁ to adjust then press ENTER to  
confirm and exit.  
• Note that using the Auto MCACC (page 9)  
again overwrites the speaker settings.  
Dynamic Range Control  
Specifies dynamic range adjustment to Dolby  
Digital or some DTS soundtracks. If low level  
sound or dialog seem difficult to hear properly,  
this can help by bringing up the low level  
sounds, while controlling high level peaks.  
Channel level setting  
Set the relative channel levels from your main  
3
listening position.  
DRC OFF (default) – No dynamic range  
adjustment (use when listening at higher  
volumes)  
Use ꢂ/ꢃ to switch between channels in the  
following order:  
L – Front left speaker  
C – Center speaker  
R – Front right speaker  
SR – Surround right speaker  
DRC MID – Mid setting  
DRC HIGH – Dynamic range is reduced  
(loud sounds are reduced in volume while  
quieter sounds are increased)  
Note  
1 There are other settings you can adjust from the Setup menu; these are explained in Improving poor FM reception on page 12  
and Dimming the display on page 37.  
2 The setup menu is exited automatically after 5 minutes of inactivity.  
3 • You can’t adjust center/surround when Stereo or Virtual playback is selected (or with stereo sources using the Auto mode).  
• The Channel level setting is not available when headphones are connected.  
• The speaker volume can be adjusted at any time by pressing SHIFT+TEST TONE and then using ꢀ/ꢁ to adjust the channel  
levels. The test tone automatically moves from speaker to speaker in the order listed above. You should hear the test tone at the  
same volume from each speaker when seated in the main listening position. Press ENTER when you’re finished.  
• Since the subwoofer produces ultra-low frequencies, it may seem quieter than it actually is.  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
07  
Video Adjust menu  
Chapter 7  
Video Adjust menu  
Video Adjust menu  
From the Video Adjust screen you can adjust  
settings that affect picture presentation.  
1
Press HOME MENU and select ‘Video  
Adjust’ from the on-screen display.  
Video Adjust  
2
Make settings using ꢀ/ꢁ/ꢂ/ꢃ and  
ENTER  
.
Video Adjust  
Sharpness  
Standard  
Brightness  
Contrast  
Gamma  
0
0
Off  
0
Hue  
Chroma Level  
0
You can adjust the following settings:  
Sharpness – Adjusts the sharpness of  
edges in the picture (Fine, Standard, Soft)  
Brightness – Adjusts the overall  
brightness (–20 to +20)  
Contrast – Adjusts the contrast between  
light and dark (–16 to +16)  
Gamma – Adjusts the ‘warmth’ of the  
picture (High, Medium, Low, Off)  
Hue – Adjusts the red/green balance  
(Green 9 to Red 9)  
Chroma Level – Adjusts how saturated  
colors appear (–9 to +9)  
Adjust the Brightness, Contrast, Hue and  
Chroma Level settings using ꢂ/ꢃ.  
Brightness  
min  
max  
0
3
Press ENTER to return to the Video Adjust  
screen, or HOME MENU to exit.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu  
08  
Chapter 8  
Initial Settings menu  
1
Press DVD/CD  
.
Using the Initial Settings menu  
2
With playback stopped, press HOME  
The Initial Settings menu provides audio and  
video output settings, parental lock settings,  
and display settings, among others.  
MENU and select ‘Initial Settings’.  
Initial Settings  
If an option is grayed out it means that it  
cannot be changed at the current time. This is  
usually because a disc is playing. Stop the  
disc, then change the setting.  
3
Use ꢀ/ꢁ/ꢂ/ꢃ and ENTER to select the  
setting and option you want to set.  
All the settings and options are explained on  
the following pages.  
1
Video Output settings  
Setting  
Option  
What it means  
TV Screen  
4:3 (Letter Box)  
Set if you have a conventional 4:3 TV. Widescreen movies are  
shown with black bars top and bottom.  
(See also Screen sizes  
and disc formats on  
page 41.)  
4:3 (Pan & Scan)  
Set if you have a conventional 4:3 TV. Widescreen movies are  
shown with the sides cropped so that the image fills the screen.  
16:9 (Wide)  
Interlace  
Progressive  
Set if you have a widescreen TV.  
Set if your TV is not compatible with progressive scan video.  
Component Out  
(See also Connecting  
using the component  
video output on  
Set if your TV is compatible with progressive scan video (see  
your TV’s instruction manual for details). Press ENTER once  
more to confirm (or RETURN to cancel).  
Note that progressive scan video is only output from the  
component video jacks.  
page 32.)  
HDMI Resolution  
(See Connecting using  
HDMI on page 34.)  
1920x1080i  
1280x720p  
Set if your TV supports 1920 x 1080 pixel interlace video.  
Set if your TV supports 1280 x 720 pixel progressive-scan video.  
720x480p (NTSC) /  
720x576p (PAL)  
Set if your TV supports 720 x 480 (NTSC) / 720 x 576 (PAL) pixel  
progressive-scan video.  
* Default changes with  
TV format (PAL/NTSC).  
720x480i (NTSC) / 720x576i Set if your TV supports 720 x 480 (NTSC) / 720 x 576 (PAL) pixel  
(PAL)  
interlace video.  
Note  
1 • In the table, the default setting is shown in bold: other settings are shown in italics.  
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often  
these settings can also be made from the DVD disc menu.  
• The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible  
component using the HDMI connector.  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Initial Settings menu  
Setting  
Option  
What it means  
HDMI Color  
(See Connecting using  
HDMI on page 34)  
* Default changes  
depending on device  
connected.  
Full range RGB  
If colors are weak, this gives brighter colors and deeper black  
(default setting for HDMI-compatible DVI devices).  
RGB  
Use this setting if colors appear overly rich on the Full Range  
RGB setting.  
Component  
Outputs 8-bit component video format (default setting for  
HDMI-compatible devices).  
Language settings  
Setting  
Option  
What it means  
Audio Language  
English (all other models) / If there is the specified language soundtrack on the disc, it is  
Chinese (Taiwanese model)  
Languages as displayed  
Other Language  
played.  
If there is a language selected on the disc, it is played.  
Select to choose a language other than the ones displayed (see  
Using the language code list on page 46).  
Subtitle Language  
English (all other models) / If there are subtitles in the specified language on the disc they  
Chinese (Taiwanese model)  
Languages as displayed  
Other Language  
are displayed.  
The subtitle language selected on the disc is displayed.  
Select to choose a language other than the ones displayed (see  
Using the language code list on page 46).  
DVD Menu  
Language  
w/Subtitle Lang.  
DVD disc menus are displayed in the same language as your  
selected subtitle language, if possible.  
Languages as displayed  
Other Language  
DVD menus are displayed in the selected language, if possible.  
Select to choose a language other than the ones displayed (see  
Using the language code list on page 46).  
Subtitle Display  
On  
Subtitles are displayed in your selected subtitle language.  
Subtitles are always off by default when you play a DVD disc.  
Off  
Display settings  
Setting  
Option  
What it means  
OSD Language  
English (all other models) / On-screen displays are shown in the language specified.  
(Taiwanese model)  
Languages as displayed  
On-screen displays are shown in the language selected.  
Angle Indicator  
On  
A camera icon is displayed on-screen during multi-angle  
scenes on a DVD disc.  
Off  
No multi-angle indication is shown.  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings menu  
Options settings  
08  
Setting  
Option  
What it means  
Parental Lock  
DivX(R) VOD  
See Parental Lock below.  
See About DivX® VOD content below.  
Display  
Setting/changing the Parental Lock  
Parental Lock  
• Default level: Off; Default password: none;  
1
2
Select ‘Level Change’.  
Default Country/Area code: us (2119)  
Use number buttons to enter your  
To give you some control over what your  
children watch on your DVD player, some DVD-  
Video discs feature a Parental Lock level. If  
your player is set to a lower level than the disc,  
the disc won’t play.  
password, then press ENTER  
.
3
Select a new level and press ENTER  
.
• Press repeatedly to lock more levels  
(more discs will require the password);  
press to unlock levels. You can’t lock  
level 1.  
Some discs also support the Country/Area  
Code feature. The player does not play certain  
scenes on these discs, depending on the  
Country/Area Code you set.  
Setting/changing the Country/Area code  
You can find the Country/Area code list on  
page 47.  
Registering a new password  
Register a password to change the Parental  
Lock level or enter a Country/Area code.  
1
Select ‘Country Code’, input your  
1
password, then press ENTER  
.
1
Select ‘Password’.  
2
Select a Country/Area code then press  
ENTER  
.
Initial Settings  
There are two ways you can do this:  
Video Output  
Language  
Display  
Parental Lock  
DivX (R) VOD  
Password  
Level Change  
Country Code  
• Select by code letter: Use ꢀ/ꢁ to change  
the Country/Area code.  
Options  
• Select by code number: Press then use  
the number buttons to enter the 4-digit  
Country/Area code.  
2
Use the number buttons to input a 4-digit  
password then press ENTER  
.
The new Country/Area code takes effect after  
ejecting the disc once.  
Changing your password  
To change your password, confirm your  
existing password then enter a new one.  
1
Select ‘Password Change’, input your  
existing password, then press ENTER  
.
2
Enter a new password and press ENTER.  
Note  
1 • Not all discs use Parental Lock, and will play without requiring the password first.  
• If you forget your password, you’ll need to reset the player to register a new password (see Resetting the system on page 46).  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Initial Settings menu  
®
disc (thereby using up one of the remaining  
plays), or stopping. If you load a disc that  
contains expired DivX VOD content (for  
example, content that has zero remaining  
plays), the message Rental Expired is  
displayed.  
About DivX VOD content  
In order to play DivX VOD (video on demand)  
content on this player, you first need to register  
the player with your DivX VOD content  
provider. You do this by generating a DivX VOD  
registration code, which you submit to your  
If your DivX VOD content allows an unlimited  
number of plays, then you may load the disc  
into your player and play the content as often  
as you like, and no message will be displayed.  
1
provider.  
Important  
• DivX VOD content is protected by a DRM  
(Digital Rights Management) system. This  
restricts playback of content to specific,  
registered devices.  
• If you load a disc that contains DivX VOD  
content not authorized for your player, the  
message Authorization Error is displayed  
and the content will not play.  
Displaying your DivX VOD registration  
code  
1
Press HOME MENU and select ‘Initial  
Settings’.  
2
Select ‘Options’, then ‘DivX (R) VOD’.  
Initial Settings  
Video Output  
Parental Lock  
DivX (R) VOD  
Display  
Language  
Display  
Options  
3
Select ‘Display’.  
Your 8-digit registration code is displayed.  
Make a note of the code as you will need it  
when you register with a DivX VOD provider.  
®
Playing DivX VOD content  
Some DivX VOD content may only be playable  
a fixed number of times. When you load a disc  
containing this type of DivX VOD content, the  
remaining number of plays is shown on-screen  
and you then have the option of playing the  
Note  
1 Resetting the player (as described in Resetting the system on page 46) will not cause you to lose your registration code.  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other connections  
09  
Chapter 9  
Other connections  
Connect the LINE AUDIO IN jacks to the  
analog outputs of an external playback  
component.  
Connect using RCA pin-plug stereo cables.  
Connecting external antennas  
For an external AM antenna, use 5 m to 6 m of  
vinyl-insulated wire and set up either indoors or  
outdoors. Leave the loop antenna connected.  
Connecting the S-video output  
Outdoor antenna  
If your TV has an S-video input, you can use this  
instead of the standard video output for a  
better quality picture.  
Indoor  
antenna  
(vinyl-coated  
Use an S-video cable to connect the S-  
wire)  
AM LOOP  
VIDEO OUT to an S-video input on your TV.  
Line up the small triangle above the jack with  
the same mark on the plug before plugging in.  
5 m to 6 m  
For an external FM antenna, use a PAL  
connector to hook up an external FM antenna.  
S-VIDEO  
INPUT  
ANTENNA  
PAL connector  
TV  
Connecting auxiliary audio  
components  
C
R/  
ANTENNA  
P
R
Using the stereo analog inputs, you can  
connect an external component such as a tape  
deck or MD player for playback through this  
system.  
COENT  
DEO  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
AM LOOP  
IN  
S-VIDEO  
Y
MCACC  
MIC  
VIDEO OUT  
HDMI OUT  
CONTROL  
AUDIO  
OUTPUT  
Tape deck, etc.  
C
R/  
P
R
COMPONENT  
VIDEO  
FRONT  
R
R
LINE  
C
B/  
P
B
L
R
Y
SURROUND  
VIDEO OUT  
AUDIO IN  
S
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Other connections  
Compatibility of this player with  
progressive-scan and high-definition TVs  
This player is compatible with progressive  
Connecting using the  
component video output  
2
video Macro Vision System Copy Guard.  
If your TV has component video inputs, you can  
use these instead of the standard video output  
1
to connect this system to your TV. This should  
give you the best quality picture from the three  
types of video output available.  
Using this unit with a Pioneer  
plasma display  
3
If you have a Pioneer plasma display , you can  
Use a component video cable to connect  
4
the COMPONENT VIDEO OUT to a set of  
component inputs on your TV.  
use an SR+ cable to connect it to this unit  
and take advantage of various convenient  
features, such as controlling this unit via the  
plasma display's remote sensor, automatic  
video input switching of the plasma display,  
and automatic volume muting on the plasma  
display.  
COMPONENT  
INPUT  
Media receiver  
TV  
CONTROL  
OUT  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
Pioneer plasma display  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
AM LOOP  
IN  
S-VIDEO  
Y
MCACC  
MIC  
VIDEO OUT  
HDMI OUT  
CONTROL  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
About progressive scan video  
AM LOOP  
IN  
Compared to interlace video, progressive scan  
video effectively doubles the scanning rate of  
the picture, resulting in a very stable, flicker-  
free image. Progressive scan video is available  
only from the component video output.  
S-VIDEO  
Y
MCACC  
MIC  
VIDEO OUT  
HDMI OUT  
CONTROL  
Note  
1 The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 27.  
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-  
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch  
the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this  
model, please contact our customer service center.  
3 This system is compatible with all Pioneer plasma displays from 2003 onward.  
4 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-  
tomer Support division for more information on obtaining an SR+ cable.  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other connections  
09  
4
Assign any input source connected to the  
Important  
plasma display to the corresponding input  
number.  
Use ꢂ/ꢃ to select the source (DVD, LN  
(LINE) or USB), then ꢀ/ꢁ to select the input  
number.  
• With an SR+ cable connected, the remote  
must now be pointed towards your plasma  
display rather than the remote sensor of  
this unit in order to control this system.  
This matches this unit’s input source with a  
numbered video input on the plasma display.  
For example, select the LN PDP3 setting if the  
video output of your line component is  
connected to video input 3 on the plasma  
display. TVTN switches the plasma display to  
its built-in tuner and NONE leaves the plasma  
display input as is (no switching takes place).  
Use a 3-ringed miniplug SR+ cable to  
2
connect the CONTROL IN jack of this unit  
through a media receiver to the CONTROL  
1
OUT jack of your plasma display.  
Before you can use the extra SR+ features, you  
need to make a few settings in the unit. See  
SR+ Setup for Pioneer plasma displays below  
for detailed instructions.  
5
When you're finished, press ENTER  
.
SR+ Setup for Pioneer plasma  
displays  
Switching on the SR+ mode  
Make the following settings if you have  
connected a Pioneer plasma display to this  
unit using an SR+ cable. Note that the number  
of video inputs available will depend on the  
plasma display you’ve connected.  
1
2
Press SHIFT+SR+ on the remote.  
Use ꢂ/ꢃ to select SR+ ON then press  
ENTER.  
To switch SR+ control off, select SR+ OFF.  
• If you disconnect the SR+ cable or switch  
the plasma display off while SR+ is on, the  
SR+ ON setting remains.  
1
Press SHIFT+SR+ on the remote.  
2
Use the ꢂ/ꢃ to select SETUP, then  
press ENTER.  
• The SR+ setting is maintained even after  
switching this system into standby then  
back on. Automatic muting will be effective  
when this system is switched on.  
3
Use ꢀ/ꢁ to select the setting you want.  
VoL.C OFF – This unit does not control the  
volume of the plasma display.  
VOL.C ON – When this unit is switched to  
one of the inputs that use the plasma  
display (DVD, or another one of functions  
below), the volume on the plasma display is  
muted so only sound from this system is  
heard.  
Note  
1 You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL  
OUT jack of your plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power  
isn’t switched off.  
2 The PDP5 input may be called ‘PC Input’ (or similar) on your plasma display.  
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Other connections  
Switching the HDMI audio setting  
To listen to audio from the HDMI interconnect,  
make sure you’ve specified the HDMI audio  
output setting.  
Connecting using HDMI  
If you have a HDMI or DVI (with HDCP)  
equipped monitor or display, you can connect  
it to this player using a commercially available  
HDMI cable for high quality digital video.  
1
Switch the system into standby.  
1
2
Press SHIFT+SETUP and use ꢂ/ꢃ to  
See About HDMI below for more about the  
HDMI connection.  
choose HDMI OUT then press ENTER  
.
3
Use ꢀ/ꢁ to choose the setting you want  
Use an HDMI cable to connect the HDMI  
then press ENTER  
.
OUT interconnect on this player to an HDMI  
interconnect on a HDMI-compatible monitor.  
AUDIO ON – Audio signals are output  
2
through the HDMI interconnect  
AUDIO OFF – Switches off HDMI audio  
Resetting the HDMI connection  
If you get an error message (the display shows  
HDMI ERR) or if the screen goes blank (for  
example, after changing the resolution), check  
the troubleshooting guide on page 44. If this  
doesn’t solve the problem, follow the steps  
below to reset the HDMI connection.  
HDMI  
connector  
HDMI-compatible display  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
FRONT  
R
R
LINE  
C
B/  
VIDEO  
L
P
B
FM  
UNBAL75  
M LOOP  
IN  
R
S-VIDEO  
Y
SURROUND  
MCACC  
MIC  
VIDEO OUT  
AUDIO IN  
HDMI OUT  
CONTROL  
S
1
Switch the system into standby.  
• The arrow on the cable connector body  
should be face up for correct alignment  
with the connector on the player.  
2
Press SHIFT+SETUP and use ꢂ/ꢃ to  
choose HDMI INI then press ENTER  
.
The system will restart and the HDMI settings  
are automatically reset to the factory defaults.  
See Video Output settings on page 27 for more  
on these settings.  
You can also adjust the HDMI settings for  
resolution and color. For more on these  
settings see Video Output settings on page 27.  
Note  
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Dig-  
ital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI) to  
do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.  
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on  
the component you have connected, using a DVI connection may result in unreliable signal transfers.  
• When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match  
the new component (see Video Output settings on page 27 to do this).  
2 If the AUTO surround mode is selected, there are cases where you won’t hear sound from the center and surround speakers.  
In this case, we recommend selecting AUDIO OFF.  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other connections  
About HDMI  
09  
HDMI (High Definition Multimedia Interface)  
supports both video and audio on a single  
digital connection for use with DVD players,  
DTV, set-top boxes, and other AV devices.  
HDMI was developed to provide the  
technologies of High Bandwidth Digital  
Content Protection (HDCP) as well as Digital  
Visual Interface (DVI) in one specification.  
HDCP is used to protect digital content  
transmitted and received by DVI-compliant  
displays.  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus  
standard to multichannel surround-sound  
audio. HDMI features include uncompressed  
digital video, a bandwidth of up to 2.2 gigabytes  
per second (with HDTV signals), one connector  
(instead of several cables and connectors), and  
communication between the AV source and  
AV devices such as DTVs.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI licensing LLC.  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
Chapter 10  
Additional information  
TV system setting  
Not applicable to the Taiwanese model  
Optional system settings  
All the available settings in the standby setup  
The default setting of this system is AUTO, and  
unless you notice that the picture is distorted  
when playing some discs, you should leave it  
set to AUTO. If you find picture distortion with  
some discs, set the TV system to match your  
country or region’s system. However, this may  
restrict the kinds of disc you can watch. See  
the table for the kinds of discs compatible with  
1
menu are listed below . See the notes in each  
section for more information about the  
settings. The first setting in each section is the  
default.  
1
Switch the system into standby.  
2
Press SHIFT+SETUP and use ꢂ/ꢃ then  
3
ENTER to choose the setting you want to  
adjust.  
each setting (AUTO, PAL and NTSC).  
2
After using ꢂ/ꢃ to choose TV SYS (step  
above), press ENTER to change the TV  
The available settings are shown in the front  
2
panel display.  
system as follows:  
AUTO NTSC  
NTSC PAL  
3
Use ꢀ/ꢁ to adjust then press ENTER to  
confirm and exit.  
PAL AUTO  
The system automatically switches on and  
you’ll see the new TV system setting in the  
System demo setting  
Switches the automatic demo feature on or off  
(this starts when you plug in for the first time):  
4
display after seeing WELCOME.  
DEMO ON – Switches the demo feature on.  
Player setting  
DEMO OFF – Switches the demo feature off.  
Format NTSC PAL AUTO  
Media Type  
Frequency step setting  
DVD/Super VCD/ NTSC  
NTSC PAL NTSC  
NTSC PAL PAL  
Video CD/DivX  
Video  
If you find that you can’t tune into stations  
successfully, the frequency step may not be  
suitable for your country/region.  
PAL  
CD/MP3/WMA/  
MPEG-4 AAC/  
JPEG/no disc  
NTSC PAL NTSC or  
PAL  
• AM 9K  
AM 10K  
Note  
1
The HDMI features are explained in Connecting using HDMI on page 34.  
2 The setup menu is exited automatically after 5 minutes of inactivity.  
3 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch  
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-  
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has  
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at  
the top and bottom of the screen.  
4 You have to switch the player into standby (press STANDBY/ON) before each change.  
36  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
1
Press SHIFT+SETUP and use ꢂ/ꢃ to  
DTS CD setting  
If you play a DTS-encoded CD, you will need to  
select DIMMER then press ENTER  
.
change this setting to hear the decoded signal.  
2
Use ꢀ/ꢁ to adjust then press ENTER to  
NORMAL – Regular CD playback; some  
DTS-encoded CDs output a noisy signal.  
confirm and exit.  
LIGHT – Brighter setting  
DTS-CD – Proper decoding of DTS-  
encoded CDs; the beginning of regular CD  
tracks my be skipped.  
DARK – Darker setting  
Disc / content format playback  
compatibility  
Key lock setting  
LOCK ON – Makes the front panel buttons  
This player is compatible with a wide range of  
disc types (media) and formats. Playable discs  
will generally feature one of the following logos  
on the disc and/or disc packaging. Note  
however that some disc types, such as  
recordable CD and DVD, may be in an  
unplayable format.  
and controls inoperative.  
LOCK OFF – Restores regular use of the  
front panel buttons and controls.  
Setting the sleep timer  
The sleep timer switches off the system after  
about an hour so you can fall asleep without  
See the Disc compatibility table below for more  
information.  
1
worrying about it.  
Press SLEEP repeatedly to select an  
option.  
DVD-Video  
DVD-R  
DVD-RW  
Choose between the following options:  
SLP ON – Switches off after about an hour  
SLP OFF – Cancels the sleep timer  
Audio CD  
Video CD  
CD-R  
CD-RW  
After selecting SLP ON, you can press SLEEP  
again to check how much time is left. Each line  
indicates approximately 12 minutes  
(remaining):  
Fujicolor CD  
S L P - - - - -  
• This unit will play DVD+R/+RW discs.  
is a trademark of Fuji Photo Film Co. Ltd.  
Dimming the display  
is a trademark of DVD Format/Logo  
Licensing Corporation.  
You can choose one of two brightness settings  
for the front panel display.  
• Also compatible with KODAK Picture CD.  
Note  
1 The display dims when the sleep timer is set.  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
This player supports the IEC’s Super VCD stan-  
dard for superior picture quality, dual  
soundtracks, and widescreen support.  
Media  
Compatible formats  
PC-created • Discs recorded using a PC may not  
disc  
be playable due to the setting of the  
software used to create the disc. In  
these instances, check the DVD-R/RW  
or CD-R/RW software manual or disc  
boxes for more on compatibility.  
• Discs recorded in packet write mode  
are not compatible.  
VIDEO  
CD  
Super Video CD (Super VCD)  
About DualDisc playback  
Compressed • MPEG-1 Audio Layer 3 (MP3),  
audio  
A DualDisc is a new two -sided disc, one side  
of which contains DVD content video, audio,  
etc. while the other side contains non-DVD  
content such as digital audio material.  
Windows Media Audio (WMA), MPEG-  
4 AAC  
• Sampling rates: 32 kHz / 44.1 kHz /  
48 kHz  
• Bit-rates: Any (128 kbps or higher  
recommended)  
• VBR (variable bit rate) MP3/WMA/  
MPEG-4 AAC playback: No  
• WMA lossless encoding: No  
• DRM (Digital Rights Management)  
compatible: Yes (DRM-protected audio  
files will not play in this player).  
• File extensions: .mp3, .wma, .m4a  
(these must be used for the player to  
recognize MP3/WMA/MPEG-4 AAC  
files)  
The non-DVD, audio side of the disc is not  
compliant with the CD Audio specification and  
therefore may not play.  
The DVD side of a DualDisc plays in this  
product. DVD-Audio content will not play.  
For more detailed information on the DualDisc  
specification, please refer to the disc  
manufacturer or disc retailer.  
Disc compatibility table  
Media  
Compatible formats  
• File structure (may differ): Up to 299  
folders on a disc; up to 648 folders and  
files (combined) within each folder  
CD-R/RW  
• CD-Audio, Video CD/Super VCD, ISO  
9660 CD-ROM*  
* ISO 9660 Level 1 or 2 compliant. CD  
physical format: Mode1, Mode2 XA  
Form1. Romeo and Joliet file systems  
are both compatible.  
• Multi-session playback: No  
• Unfinalized disc playback: No  
JPEG file  
• Baseline JPEG and EXIF 2.2* still  
image files up to a resolution of 3072 x  
2048.  
*File format for digital still cameras  
• Progressive JPEG compatible: No  
• File extensions: .jpg (must be used  
for the player to recognize JPEG files)  
DVD-R/RW • DVD-Video (Video mode), Video  
Recording (VR)*, UDF Bridge DVD-ROM  
* Edit points may not play exactly as  
edited; screen may go momentarily  
blank at edited points.  
• File structure (may differ): Up to 299  
folders on a disc; up to 648 folders and  
files (combined) within each folder  
• Multi Border playback: No  
• Unfinalized playback: No  
About DVD+R/DVD+RW compatibility  
Only DVD+R/DVD+RW discs recorded in  
‘Video Mode (DVD Video Mode)’ which have  
been finalized, can be played back. However,  
some editing made during the recording may  
not be played back accurately.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
Group 3: Bulgarian (bg), Byelorussian (be), Macedonian  
(mk), Russian (ru), Serbian (sr), Ukrainian (uk)  
Group 4: Hebrew (iw), Yiddish (ji)  
About DivX  
DivX is a compressed digital video format  
®
created by the DivX video codec from DivX,  
Group 5: Turkish (tr)  
Inc. This player can play DivX video files burned  
on CD-R/RW and DVD-R/RW/ROM discs.  
Keeping the same terminology as DVD-Video,  
individual DivX video files are called ‘Titles’.  
When naming files/titles on a CD-R/RW or  
DVD-R/RW disc prior to burning, keep in mind  
that by default they will play in alphabetical  
order.  
DivX, DivX Certified, and associated logos are  
trademarks of DivX, Inc. and are used under  
license.  
About MPEG-4 AAC  
Advanced Audio Coding (AAC) is at the core of  
the MPEG-4 AAC standard, which incorporates  
MPEG-2 AAC, forming the basis of the MPEG-4  
audio compression technology. The file format  
and extension used depend on the application  
used to encode the AAC file. This unit plays  
DivX video compatibility  
®
• Official DivX Certified product.  
®
®
• Plays all versions of DivX video (including  
back AAC files encoded by iTunes bearing  
®
®
the extension '.m4a'. DRM-protected files will  
DivX 6) with standard playback of DivX  
not play, and files encoded with some versions  
1
media files.  
®
of iTunes may not play, or filenames may  
• File extensions: .avi and .divx (these must  
be used for the player to recognize DivX  
video files). Note that all files with the .avi  
extension are recognized as MPEG4, but not  
all of these are necessarily DivX video files  
and therefore may not be playable on this  
player.  
display incorrectly.  
Apple and iTunes are trademarks of Apple Computer,  
Inc., registered in the U.S. and other countries.  
About WMA  
Displaying DivX subtitle files  
The font sets listed below are available for DivX  
external subtitle files. You can see the proper  
font set on-screen by setting the Subtitle  
Language (in Language settings on page 28)  
®
The Windows Media logo printed on the box  
2
indicates that this player can playback  
Windows Media Audio content.  
to match the subtitle file.  
Group 1: Albanian (sq), Basque (eu), Catalan (ca),  
Danish (da), Dutch (nl), English (en), Faroese (fo),  
Finnish (fi), French (fr), German (de), Icelandic (is), Irish  
(ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-  
Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv)  
Group 2: Albanian (sq), Croatian (hr), Czech (cs),  
Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk),  
Slovenian (sl)  
Note  
1 Playback of .avi video files larger than 4 GB is not possible.  
2 • For external subtitle files the following subtitle format filename extensions are supported (please note that these files are not  
shown within the disc navigation menu): .srt, .sub, .ssa, .smi  
• Some external subtitle files may be displayed incorrectly or not at all.  
• The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file.  
• The number of external subtitle files which can be switched for the same movie file is limited to a maximum of 10.  
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
WMA is an acronym for Windows Media Audio  
and refers to an audio compression technology  
developed by Microsoft Corporation. WMA  
content can be encoded by using Windows  
Discs to avoid  
Discs spin at high speed inside the player. If a  
disc is cracked, chipped, warped, or otherwise  
damaged, don't risk using it in your player—  
you could end up damaging the unit.  
®
®
Media Player version 7, 7.1, Windows Media  
®
®
This unit is designed for use with conventional,  
fully circular discs only. Pioneer disclaims all  
liability arising in connection with the use of  
shaped discs.  
Player for Windows XP, or Windows Media  
Player 9 Series.  
Microsoft, Windows Media, and the Windows logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other countries.  
DVD Video regions  
All DVD Video discs carry a region mark that  
indicates which region(s) of the world the disc  
is compatible with. Your DVD system also has  
a region mark (on the rear panel). Discs from  
incompatible regions will not play in this  
player. In this instance, the following message  
appears on-screen:  
Using and taking care of discs  
Handling discs  
Hold the disc by its edges when handling so as  
not to leave fingerprints, dirt or scratches on  
either side of the disc. Damaged or dirty discs  
can affect playback performance.  
Incompatible disc region number  
Can’t play disc  
If a disc becomes marked with fingerprints,  
dust, etc., clean using a soft, dry cloth.  
Discs marked ALL play in any player.  
Installation and maintenance  
Hints on installation  
Wipe lightly from the center of the disc using  
straight strokes. Don’t wipe the disc surface  
with circular strokes.  
We want you to enjoy using this system for  
years to come, so please bear in mind the  
following points when choosing a location:  
If necessary, use a cloth soaked in alcohol, or a  
commercially available CD/DVD cleaning kit to  
clean a disc more thoroughly. Never use  
benzine, thinner or other cleaning agents such  
as those designed for cleaning vinyl records.  
Do...  
Use in a well-ventilated room.  
Place on a solid, flat, level surface, such as a  
table, shelf or stereo rack.  
Don’t...  
Storing discs  
Use in a place exposed to high temperatures or  
humidity, including near radiators and other  
heat-generating appliances.  
Place on a window sill or other place where the  
system will be exposed to direct sunlight.  
Avoid leaving discs in excessively cold, humid,  
or hot environments (including under direct  
sunlight). Don't glue paper or put stickers onto  
the disc, or use a pencil, ball-point pen or other  
sharp-tipped writing instrument. These could  
all damage the disc.  
Use in an excessively dusty or damp  
environment.  
Place directly on top of an amplifier, or other  
component in your stereo system that becomes  
hot in use.  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
Use near a television or monitor as you may  
experience interference—especially if the  
television uses an indoor antenna.  
Use in a kitchen or other room where the system  
may be exposed to smoke or steam.  
Use on a thick rug or carpet, or cover with  
cloth—this may prevent proper cooling of the  
system unit.  
Place on an unstable surface, or one that is not  
large enough to support all four of the system  
unit’s feet.  
Screen sizes and disc formats  
DVD-Video discs come in different screen  
aspects, ranging from TV programs, which are  
generally 4:3, to CinemaScope widescreen  
2
movies , with an aspect ratio of up to about 7:3.  
Televisions also come in different aspect  
3
ratios; ‘standard’ 4:3 and widescreen 16:9.  
Set to 4:3 (Letter Box), widescreen  
discs are shown with black bars top  
and bottom.  
Cleaning the pickup lens  
The DVD player’s lens should not become dirty  
in normal use, but if for some reason it should  
malfunction due to dust or dirt, consult your  
nearest Pioneer authorized service center.  
Although lens cleaners are commercially  
available, we do not recommend using them  
since some may damage the lens.  
Set to 4:3 (Pan&Scan), widescreen  
discs are shown with the left and right  
sides cropped. Although the picture  
looks larger, you don’t actually see  
the whole picture.  
Problems with condensation  
Condensation may form inside the player if it is  
brought into a warm room from outside, or if  
the temperature of the room rises quickly.  
Although the condensation won’t damage the  
player, it may temporarily impair performance.  
Leave it to adjust to the warmer temperature  
for about an hour before switching on.  
Moving the system unit  
If you need to move the main unit, first remove  
a disc if there’s one in the player, then press ꢃ  
STANDBY/ON on the front panel to turn the  
system off. Wait for GOOD BYE to disappear  
1
from the display, then unplug the power cord.  
Never lift or move the unit during playback—  
discs rotate at high speeds and may damage.  
Note  
1 Unplugging the unit before GOOD BYE disappears from the display may cause the system to return to the factory settings.  
2 Many widescreen discs override the system’s settings so that the disc is shown in letterbox format regardless of the setting.  
3 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.  
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV  
may offer various zoom and stretch options; see the instructions that came with your TV for details.  
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a ‘letterbox’ style.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
Troubleshooting  
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is  
something wrong with this component, check the points below. Sometimes the trouble may lie in  
another component. Investigate the other components and electrical appliances being used. If the  
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer  
authorized service center or your dealer to carry out repair work.  
• If the system does not operate normally due to external effects such as static electricity  
disconnect the plug from the outlet and insert again to return to normal operating conditions.  
General  
Problem  
Remedy  
The power does not turn • Wait for one minute before switching back on.  
on, or switches off  
suddenly (an error  
message may be  
• Make sure there are no loose strands of wire touching the unit. This could cause  
the system to shut off automatically.  
• Check that the speakers are connected correctly.  
• Make sure the voltage of the mains power source is correct for the model.  
• Try reducing the volume level.  
displayed at startup).  
• If the problem persists, take it to your nearest Pioneer authorized service center  
or your dealer for servicing.  
No sound is output  
when a function is  
selected.  
• If you’re using the line input, make sure the component is connected correctly  
(see Connecting auxiliary audio components on page 31).  
• Press MUTE on the remote control to turn muting off.  
No sound from surround • Refer to Channel level setting on page 25 to check the speaker levels.  
or center speakers.  
• When TUNER is selected, you can only hear the source in stereo.  
• Check that you haven’t selected the AUTO, STEREO or VIRTUAL mode (see  
Listening to your system on page 14).  
• Connect the speakers properly (refer to the Setup Guide).  
• If the source is 96 kHz, it will be played in stereo.  
Can’t operate the remote • Replace the batteries (refer to the Setup Guide).  
control. • Operate within 7 m, 30° of the remote sensor (refer to the Setup Guide).  
• Remove any obstacles or operate from another position.  
• Avoid exposing the remote sensor on the front panel to direct light.  
• Check that there’s nothing mistakenly plugged into the CONTROL IN jack.  
• If the system is connected to a Pioneer plasma display with an SR+ cable, check  
that the plasma display is switched on. Point the remote control at the plasma  
display in order to operate the system.  
TRAYLOCK shows in the • Press and hold (eject) on the front panel for about eight seconds. Then the tray  
display and the tray can’t can be opened/closed using (eject).  
be ejected.  
SND. DEMO shows in  
• Press and hold (stop) on the front panel for about five seconds. The disc tray  
the display and the unit ejects automatically to indicate the Sound Demo mode is disabled.  
can’t be controlled.  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
DVD/CD/Video CD player  
Problem  
Remedy  
The disc is ejected  
automatically after  
loading.  
• Clean the disc and align the disc properly in the disc guide.  
• If the region number on a DVD-video disc does not match the number on the  
player, the disc cannot be used (see DVD Video regions on page 40). In this  
instance, the following message appears on screen: Incompatible disc region  
number / Can’t play disc.  
• Allow time for any condensation inside the player to evaporate. Avoid using the  
player near an air-conditioning unit.  
Playback not possible.  
• If the disc is loaded upside down, reload the disc with label side face up.  
Picture playback stops • Press (stop), then (play) to start playback again.  
and buttons cannot be • Switch the power off once, then on again using the front panel  
used.  
STANDBY/ON button.  
Settings are canceled.  
No picture/No color.  
• When the power is cut, settings will be canceled.  
• Check that connections are correct and that plugs are inserted fully.  
• Check the manual of the TV/monitor to make sure the settings are correct.  
• If the Progressive setting is selected and you have used component video cables  
to connect a TV that is not compatible with a progressive scan signal, you will not  
be able to see any picture at all. With your TV connected using either the  
composite or S-video terminals, change the Component Out setting to Interlace  
(see Video Output settings on page 27).  
Screen is stretched or  
• The TV Screen setting is incorrect. Set the TV Screen option to match the TV/  
aspect doesn’t change. monitor you're using (see Video Output settings on page 27).  
When recorded on a • This system uses copy-protection technology which may prevent recording or  
VCR or passed through cause picture problems when connected through a VCR or AV selector. This is not  
an AV selector, there is a malfunction.  
disturbance in the  
playback picture.  
Picture disturbance  
• This player is compatible with Macro-Vision System copy guard. Some discs  
during playback or dark. include a copy prevention signal, and when this type of disc is played back, stripes  
etc., may appear on some sections of the picture depending on the TV. This is not a  
malfunction.  
• Discs respond differently to particular player functions. This may result in the  
screen becoming black for a brief instant or shaking slightly when the function is  
executed. These problems are largely due to differences between discs and disc  
content and are not malfunctions of this player.  
Noticeable difference in • DVDs and CDs use different recording methods. This is not a malfunction.  
DVD and CD volume.  
CD-ROM disc is not  
recognized.  
• Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See  
Disc compatibility table on page 38 for more on disc compatibility.  
DVD-ROM disc is not  
recognized.  
• Make sure that the DVD-ROM was recorded using the UDF bridge format. See  
Disc compatibility table on page 38 for more on disc compatibility.  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
Problem  
Remedy  
Files don’t show up in  
the Disc Navigator/  
Photo Browser.  
• The files on the disc must be named with the correct file extension: .mp3 for MP3  
files; .wma for WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or  
lower-case is OK). See Disc compatibility table on page 38.  
Can’t play WMA or  
MPEG-4 AAC files.  
• The files were recorded using DRM (digital rights management). This is not a  
malfunction.  
Tuner  
Problem  
Remedy  
Considerable noise in  
radio broadcasts.  
• Connect the AM antenna (refer to the Setup Guide) and adjust the direction and  
position for best reception. You may also connect an additional internal or external  
AM antenna (refer to Connecting external antennas on page 31).  
• Fully extend the FM wire antenna, position for best reception, and secure to a  
wall. You may also connect an outdoor FM antenna (see Connecting external  
antennas on page 31).  
• Turn off other equipment that may be causing the noise or move it further away.  
• The tuning interval is incorrect for your country or region. See Frequency step  
setting on page 36 to switch the tuning interval.  
Auto tuning does not  
pick up some stations.  
• The radio signal is weak. Auto tuning will only detect radio stations with a good  
signal. For more sensitive tuning, connect an outdoor antenna.  
USB connection  
Problem  
Remedy  
USB mass storage  
• Make sure you have completely inserted the USB connector to this unit.  
device is not recognized • Check that the memory format is FAT16 or FAT32.  
by the system.  
• USB devices with an internal USB hub are not supported.  
Files don’t show up in  
the Navigator/Photo  
Browser.  
• The files must have the correct file extension: .mp3 for MP3 files; .wma for WMA  
files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or lower-case is OK).  
• Make sure the file permission hasn’t been restricted (through a password, etc.).  
Can’t play WMA or  
MPEG-4 AAC files.  
• The files were recorded using DRM (digital rights management). This is not a  
malfunction.  
HDMI connection  
Problem  
Remedy  
No HDMI audio output. • See Switching the HDMI audio setting on page 34 to make sure that AUDIO ON  
is selected.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
Problem  
Remedy  
No HDMI video output  
• Make sure that you’ve selected this player as the HDMI input in the settings for  
the component you’re using (refer to the component’s instruction manual).  
• Check that the HDMI cable is connected properly and isn’t damaged.  
• Check that components connected using the HDMI interface are switched on  
and HDMI compatible. (components must be compatible with both DVI and High  
Bandwidth Digital Content Protection (HDCP).)  
• This unit has been designed to be compliant with HDMI Version 1.1. Depending  
on the component you have connected, using a DVI connection may result in  
unreliable signal transfers.  
• Make sure the resolution on this unit matches that of the component connected  
using HDMI. See Video Output settings on page 27 to change the resolution.  
• If the screen goes blank after changing the resolution, it means the you selected  
a resolution incompatible with your monitor. See Resetting the HDMI connection  
on page 34 to reset to the factory defaults.  
Color problems occur  
• Depending on the connected equipment, some HDMI Color settings may cause  
with your monitor after the picture to be displayed incorrectly. In this case, use the TV's own video input  
changing the HDMI settings to select RGB, if possible. Alternatively, revert to the previous HDMI Color  
Color setting (page 27). setting.  
Error Messages  
Message  
Description  
2CH ONLY  
• An operation is prohibited because it is only applicable to 2 channel  
sources, while the current source is a multichannel source.  
96K  
• An operation is prohibited because the source is 96 kHz digital.  
• The sound demo is on. See General in Troubleshooting on page 42.  
• Background noise is too high to complete MCACC setup successfully.  
SND. DEMO  
NOISY  
ERR MIC  
• An error occured during MCACC setup because the microphone is not  
connected or is not connected properly.  
ERR SP  
• An error occured during MCACC setup because the speakers are not  
connected or are not connected properly.  
MUTING  
• An operation is prohibited because the sound is muted (press MUTE).  
• An operation is prohibited because the tuner is selected.  
STEREO  
TRAYLOCK  
KEY LOCK  
PHONESIN  
USB ERR  
• The tray lock is on. See General in Troubleshooting on page 42.  
• The key lock is enabled. See Key lock setting on page 37.  
• An operation is prohibited because the headphones are connected.  
• See Important in Using the USB interface on page 23 for more on this.  
HDMI ERR  
• See HDMI connection above for troubleshooting tips. See also Resetting the  
HDMI connection on page 34 if the problem persists.  
EEP ERR  
• Contact your Pioneer authorized service center or your dealer for servicing.  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
Message  
EXIT  
Description  
• Appears when a menu is automatically exited after a set period of inactivity.  
Resetting the system  
Using the language code list  
Use the front panel controls to reset all system  
settings to the factory default.  
Some of the language options (see Language  
settings on page 28) allow you to set your  
preferred language from any of the 136  
languages in the Language code list below.  
With the system on, press STANDBY/  
ON while holding down USB.  
The next time you switch on, all the system  
settings should be reset.  
1
Select ‘Other Language’.  
2
Use ꢂ/ꢃ to select either a code letter or  
a code number.  
3
Use ꢀ/ꢁ to select a code letter or a code  
number.  
See the Language code list (next page) for a  
complete list of languages and codes.  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
Language code list  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
German (de), 0405  
Italian (it), 0920  
Spanish (es), 0519  
Dutch (nl), 1412  
Russian (ru), 1821  
Chinese (zh), 2608  
Korean (ko), 1115  
Greek (el), 0512  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Lingala (ln), 1214  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swedish (sv), 1922  
Swahili (sw), 1923  
Tamil (ta), 2001  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Kirghiz (ky), 1125  
Latin (la), 1201  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Panjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Portuguese (pt), 1620  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813 Ukrainian (uk), 2111  
Kirundi (rn), 1814  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Twi (tw), 2023  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Welsh (cy), 0325  
Danish (da), 0401  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Sinhalese (si), 1909  
Country/Area code list  
Country/Area, Country/Area code, Country/Area code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Canada, 0301, ca  
Chile, 0312, cl  
China, 0314, cn  
Denmark, 0411, dk  
Finland, 0609, fi  
France, 0618, fr  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Indonesia, 0904, id  
Italy, 0920, it  
Philippines, 1608, ph  
Portugal, 1620, pt  
Russian Federation, 1821, ru  
Singapore, 1907, sg  
Spain, 0519, es  
Switzerland, 0308, ch  
Sweden, 1905, se  
Taiwan, 2023, tw  
Thailand, 2008, th  
United Kingdom, 0702, gb  
United States of America, 2119, us  
Japan, 1016, jp  
Korea, Republic of, 1118, kr  
Malaysia, 1325, my  
Mexico, 1324, mx  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Pakistan, 1611, pk  
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Additional information  
Specifications  
S-DV1T Speaker system  
Front/surround speakers  
Enclosure . . . . . . .Closed-box floorstanding type  
(magneticallyshielded)  
System . . . . . . . . . . . . . . . . . . . . . . .2-way system  
Speakers:  
Amplifier section  
RMS Power Output:  
Front, Center, Surround. . 100 W per channel  
(1 kHz, 10 % T.H.D., 4 )  
Woofer . . . . . . . . . . . . . . . .7.7 cm cone typex2  
Tweeter . . . . . . . . . . . 2.6 cm semi-dome type  
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω  
Frequency range . . . . . . . . . . . . .70 Hz to 20 kHz  
Maximum input power . . . . . . . . . . . . . . . .100 W  
Dimensions .260 mm (W) x 1096.5 mm (H) x 260 mm (D)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 kg  
Subwoofer . .100 W (100 Hz, 10 % T.H.D., 4 )  
Disc section  
Digital audio  
characteristics . . . . . . . . . DVD fs: 96 kHz, 24-bit  
Type . . . . . . . DVD system, Video CD/Super VCD  
system and Compact Disc digital audio system  
Frequency  
response . . . 4 Hz to 44 kHz (96 kHz sampling) /  
4 Hz to 22 kHz (48 kHz sampling)  
Center speaker  
Enclosure . . . . . . . . . .Closed-box bookshelf type  
(magnetically shielded)  
Wow and Flutter . . . . . . . .Limit of measurement  
System . . . . . . . . . . . . . . . . 7.7 cm 1-way system  
Speakers. . . . . . . . . . . . . . . . . . 7.7 cm cone type  
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω  
Frequency range . . . . . . . . . . . . .75 Hz to 20 kHz  
Maximum input power . . . . . . . . . . . . . . . .100 W  
Dimensions . . . . . 270 mm (W) x 96 mm (H) x 90 mm (D)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.78 kg  
(
0.001 % W.PEAK) or less (JEITA)  
FM tuner section  
Frequency range . . . . . . . . 87.5 MHz to 108 MHz  
Antenna . . . . . . . . . . . . . . . . . . 75 , unbalanced  
AM tuner section  
Frequency range:  
With 9 kHz step. . . . . . . . 531 kHz to 1602 kHz  
With 10 kHz step. . . . . . . 530 kHz to 1700 kHz  
Antenna . . . . . . . . . . . . . . . . . . . . . .Loop antenna  
Accessories  
Speaker cables. . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Small non-skid pads . . . . . . . . . . . . . . . . . . . . . . 4  
Large non-skid pads . . . . . . . . . . . . . . . . . . . . . 16  
Speaker stand bases . . . . . . . . . . . . . . . . . . . . . . 4  
Screws (for bases) . . . . . . . . . . . . . . . . . . . . . . . 12  
Miscellaneous  
Power requirements:  
Taiwanese model . . . . AC 110 V, 50 Hz /60 Hz  
All other models. . AC 220 V to 240 V, 50 Hz /60 Hz  
Power consumption . . . . . . . . . . . . . . . . . . . 55 W  
Power consumption in standby. . . . . . . . .0.29 W  
Dimensions. . .420 mm (W) x 60 mm (H) x 330 mm (D)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 kg  
S-DV1SW Speaker system  
Subwoofer (SW)  
Enclosure . . . . . . .Bass-reflex floorstanding type  
System . . . . . . . . . . . . . . . . . 16 cm 1-way system  
Speaker. . . . . . . . . . . . . . . . . . . . 16 cm cone type  
Nominal impedance . . . . . . . . . . . . . . . . . . . . 4 Ω  
Frequency range . . . . . . . . . . . . 30 Hz to 2.5 kHz  
Maximum Input Power . . . . . . . . . . . . . . . .100 W  
Dimensions . . . 220 mm (W) x 421 mm (H) x 402 mm (D)  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 kg  
Accessories (DVD/CD receiver)  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
AA/R6 dry cell batteries (to confirm system  
operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Video cable (yellow plugs) . . . . . . . . . . . . . . . . . 1  
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . 1  
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Microphone (for Auto MCACC setup). . . . . . . . 1  
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Setup Guide  
Accessories  
Speaker cables. . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Large non-skid pads . . . . . . . . . . . . . . . . . . . . . . 6  
These operating instructions  
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
10  
Note  
• Specifications and design subject to  
possible modification without notice, due  
to improvements.  
This product includes FontAvenue®  
fonts licenced by NEC corporation.  
FontAvenue is a registered trademark  
of NEC Corporation.  
This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. patents  
and other intellectual property rights  
owned by Macrovision Corporation and  
other rights owners. Use of this copyright  
protection technology must be authorized  
by Macrovision Corporation, and is  
intended for home and other limited uses  
only unless otherwise authorized by  
Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
DRM (digital rights management)  
copy protection is a technology  
designed to prevent unauthorized  
copying by restricting playback, etc. of  
compressed audio files on devices  
other than the PC (or other recording  
equipment) used to record it. For  
detailed information, please see the  
instruction manuals or help files that  
came with your PC and/or software.  
Manufactured under license from Dolby  
Laboratories.“Dolby”, “Pro Logic” and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
“DTS” and “DTS Digital Surround” are registered  
trademarks of Digital Theater Systems, Inc.  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
感謝您購買本Pioneer品。  
請徹底閱讀本操作手便正確地操作您的產您閱讀完手冊妥為保管以便將來參考之。  
位置﹕本機下面板上 。  
D3-4-2-1-7b_A_ChH  
D3-4-2-1-7c_A_ChH  
D3-4-2-2-2a_A_ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLASS 1  
LASER PRODUCT  
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER  
RADIATION WHEN OPEN, AVOID  
EXPOSURE TO THE BEAM.  
VRW2159  
D3-4-2-1-8_A_ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
目錄  
使用重複播放功. . . . . . . . . . . . . . . . . . . 19  
01 控制與顯示  
使用隨機播放功能  
. . . . . . . . . . . . . . . . . . . 20  
. . . . . . . . . . . . . . . . . . . 20  
前面. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
遙控器  
建立程序編輯清單  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
. . . . . . . 21  
. . . . . . . . . . . . . . . . . . . . . . . . . . 21  
切換字. . . . . . . . . . . . . . . . . . . . . . . . . . 21  
顯示屏  
程序編輯選單中其他可用的功能  
搜索碟片  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
02 開始操作  
家庭劇院音效設置  
. . . . . . . . . . . . . . . . . . . .9  
. . . . . . . . . . . . . . . . . . . . 21  
. . . . . . . . . . . . . . . . . . . . . . . . . . 22  
切換語言/聲道  
放大畫面  
使Auto MCACC 設置功能,  
以產生最佳的環繞聲效果. . . . . . . . . . . . . . .9  
切換拍攝角度 . . . . . . . . . . . . . . . . . . . . . . 22  
使用在屏顯示畫(OSD)  
. . . . . . . . . . . . . .10  
. . . . . . . . . . . . . . . . . . . . . . 22  
顯示碟片資訊  
碟片播放  
. . . . . . . . . . . . . . . . . . . . . . . . . .10  
基本播放控制 . . . . . . . . . . . . . . . . . . . . .11  
恢復播放及最後記憶播放  
05 播放  
USB  
使USB面  
. . . . . . . . . . . .11  
DVD-Video片選單 . . . . . . . . . . . . . . . .11  
. . . . . . . . . . . . . . . . . . . . . . 23  
基本播放控制 . . . . . . . . . . . . . . . . . . . . . . 23  
掃描檔案  
. . . . . . . . . . . . . .12  
VCD/VCD PBC單  
聆聽收音機  
. . . . . . . . . . . . . . . . . . . . . . . . . . 24  
. . . . . . . . . . . . . . . . . . . . . . . .12  
JPEG燈片秀  
. . . . . . . . . . . . . . . . . . 24  
FM收不良. . . . . . . . . . . . . . . . . . .12  
. . . . . . . . . . . . . 24  
導覽器」瀏覽檔案  
. . . . . . . . . . . . . . . . . . .12  
. . . . . . . . . . . . . . . . . . . . . . . . .13  
AM收雜訊  
記憶電台  
06 環繞音效設定值  
使設定」選單  
. . . . . . . . . . . . . . . . . . 25  
收聽預設電台 . . . . . . . . . . . . . . . . . . . . .13  
聆聽其他來源  
07 「視頻調整」選單  
「視頻調整」選單 . . . . . . . . . . . . . . . . . . . 26  
. . . . . . . . . . . . . . . . . . . . . . .13  
03 用心聆聽您的系統  
自動聆聽模式  
08 「初始設置」選單  
. . . . . . . . . . . . . . . . . . . . . . .14  
以環繞聲聆聽. . . . . . . . . . . . . . . . . . . . . . .14  
Dolby Pro Logic II Music定值  
. . . . . . . . . . . . . . . 27  
使初始設置」選單  
視頻輸出設定值  
. . . . . . . . . . . . . . . . . . . . 27  
. . . . .14  
使先進環繞聲」功能 . . . . . . . . . . . . .15  
語言設定值 . . . . . . . . . . . . . . . . . . . . . . . . 28  
顯示屏設定值  
. . . . . . . . . . . . . . . . . . . . . . 28  
. . . . . . . . . . . . . . . . . . . . . . . . 29  
. . . . . . . . . . . . . . . . . . . . . . .15  
. . . . . . . . . . . . . . . . . . . . . . .15  
使音場補正等化功能」聆. . . . . . . .15  
以立體聲聆聽  
戴上耳機聆聽  
選項設定值  
成人鎖定. . . . . . . . . . . . . . . . . . . . . . . . . 29  
DivX VOD容  
®
. . . . . . . . . . . . . . . . 30  
使聲音修正器」功能  
. . . . . . . . . . . . .15  
加強對白  
. . . . . . . . . . . . . . . . . . . . . . . . . .16  
09 其他接線  
連接外部天線  
使音調控制」功. . . . . . . . . . . . . . .16  
調整低音及高音  
. . . . . . . . . . . . . . . . . . . . . . 31  
. . . . . . . . . . . . . . . . . . . .16  
「寂靜」午夜」模式  
. . . . . . . . . . . . . . . . . . . 31  
. . . . . . . . . . . . . . . . . . . 31  
連接輔助音頻設備  
S-video出  
. . . . . . . . . . . .16  
. . . . . . . . . . . . . . . . . . . . . . .16  
加重低音音量  
04 碟片播放功能  
碟片掃描  
使用色差視頻輸出連接 . . . . . . . . . . . . . . . 32  
關於逐行掃描視頻  
. . . . . . . . . . . . . . . . . . 32  
本機Pioneer漿顯示器的  
. . . . . . . . . . . . . . . . . . . . . . . . . .17  
慢動作播放 . . . . . . . . . . . . . . . . . . . . . . . .17  
格進/格退播放  
. . . . . . . . . . . . . . . . . . . . . . . . . . 32  
組合運用  
Pioneer漿顯示器SR+置  
. . . . . . . 33  
. . . . . . . . . . . . . . . . . . . . .17  
JPEG燈片秀  
SR+. . . . . . . . . . . . . . . . . . . . . 33  
使HDMI接  
. . . . . . . . . . . . . . . . . .17  
使碟片導向」瀏覽 DVDVCD/VCD  
碟片  
. . . . . . . . . . . . . . . . . . . . . 34  
HDMI頻設定值  
. . . . . . . . . . . . . . . 34  
重新設HDMI. . . . . . . . . . . . . . . . . 34  
HDMI  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
可利碟片導向」功能瀏WMA、MP3、  
. . . . . . . . . . . . . . . . . . . . . . . . . 35  
MPEG-4 AAC、DivXJPEG檔案  
. . .19  
循環播放碟片某個片段  
. . . . . . . . . . . . . . .19  
4
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 其他資訊  
選項系統設定. . . . . . . . . . . . . . . . . . . . 36  
設置睡眠定時器  
. . . . . . . . . . . . . . . . . . . . 37  
. . . . . . . . . . . . . . . . . . . . 37  
調暗顯示幕亮度  
. . . . . . . . . . . 37  
. . . . . . . . . . . . . . . . . 38  
碟片/內容格式播放相容性  
碟片相容性參照表  
DVD+R/DVD+RW. . . . . . . . . . . 38  
. . . . . . . . . . . . . . . . . . . . . . . . 39  
DivX  
MPEG-4 AAC  
. . . . . . . . . . . . . . . . . . 39  
WMA. . . . . . . . . . . . . . . . . . . . . . . . . 39  
. . . . . . . . . . . . . . . . . . 40  
碟片的使用及維護  
DVD Video用地區  
. . . . . . . . . . . . . . . . 40  
安裝及保養. . . . . . . . . . . . . . . . . . . . . . . . 40  
安裝提示  
. . . . . . . . . . . . . . . . . . . . . . . . 40  
清潔讀寫頭時  
水氣凝結問題  
搬動系統主機  
. . . . . . . . . . . . . . . . . . . . . 41  
. . . . . . . . . . . . . . . . . . . . . 41  
. . . . . . . . . . . . . . . . . . . . . 41  
畫面大小及碟片格式 . . . . . . . . . . . . . . . . 41  
. . . . . . . . . . . . . . . . . . . . . . . . . 42  
故障排除  
一般問題  
. . . . . . . . . . . . . . . . . . . . . . . . 42  
DVD/CD/VCD放機. . . . . . . . . . . . . . . . . 43  
調諧器  
. . . . . . . . . . . . . . . . . . . . . . . . . . 44  
USB接  
. . . . . . . . . . . . . . . . . . . . . . . . . 44  
HDMI. . . . . . . . . . . . . . . . . . . . . . . . 44  
錯誤訊息  
. . . . . . . . . . . . . . . . . . . . . . . . 45  
重新設置系統  
. . . . . . . . . . . . . . . . . . . . . . 46  
. . . . . . . . . . . . . . . . . . 46  
. . . . . . . . . . . . . . . . . . . . . . 47  
使用語言代碼清單  
語言代碼清單  
國家/地區代碼清單 . . . . . . . . . . . . . . . . 47  
規格  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
5
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
控制與顯示  
第 章  
1
控制與顯示  
前面板  
遙控器  
STANDBY  
/ON  
TUNER  
OPEN/CLOSE  
DVD/CD  
USB  
VOLUME  
STANDBY/ON  
DVD/CD  
USB  
(FM/AM)  
1
2
OPEN/  
CLOSE  
LINE  
11  
12  
AUDIO  
SUBTITLE  
ANGLE  
1
2
3
4
5
6
1
4
2
5
8
0
3
6
3
7
9
ZOOM  
CLEAR  
DISPLAY  
TUNE  
TOP MENU  
MENU  
9
13  
14  
4
5
SETUP  
ST  
SR  
ST  
ENTER  
TUNE  
HOME  
MENU  
7
8
RETURN  
6
7
MCACC  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
TEST TONE  
1
OPEN/CLOSE  
開啟/關閉碟盤。  
DVD/CD  
DVD/CD 功能並開始/暫停/恢復播放。  
8
2
TV CONTROL  
SLEEP  
15  
16  
17  
9
INPUT  
SHIFT  
CHANNEL VOLUME  
VOLUME  
MUTE  
3
10  
停止播放。  
USB  
選取 功能並開始/暫停播放。  
4
USB  
VOLUME  
STANDBY/ON  
按鍵  
5
6
1 STANDBY/ON  
可將系統開機或切成待機狀態。  
可將系統開機或切成待機狀態。  
2 功能選取按鍵  
可選取您要聆聽的來(  
介面  
7
USB  
DVD/CD TUNER  
連接 USB置播放 (請參閱23USB播  
USB LINE  
。  
數字鍵/  
3
CLEAR  
-清除項目。  
DISPLAY  
插孔  
8 PHONES  
接上耳機。  
CLEAR  
-可顯示/變更在屏幕上顯示的  
DISPLAY  
碟片資22。  
9 顯示屏  
請參閱下列 顯示屏 說明。  
6
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
控制與顯示  
-可在播放位置上顯示 DVD碟  
4
片的上層選單-此項功能可能和按下  
TOP MENU  
10 SHIFT  
按下可存取反白成綠字的控制。  
MENU  
(第 11)相同。  
11 OPEN/CLOSE  
開啟/關閉碟盤。  
-用以進行各種系統及環繞  
音效設12、13、25、3436  
SHIFT+SETUP  
12 DVD  
控制  
。  
AUDIO  
。  
-可選取聲道/語21  
游標按鍵,  
及調諧按鍵  
5
ENTER  
-使用游標按鍵可導覽在屏顯  
ꢀ/ꢁ/ꢂ/ꢃ  
示畫面及選單。  
SUBTITLE  
。  
-可顯示/變更字21  
-可選取選項或執行命令。  
ENTER  
ANGLE  
的拍攝角22。  
-可變DVD角度場度播放期間  
-可調選收音機。  
TUNE +/–  
-可選取收聽收音機時想要收聽的  
ST +/–  
預設電台。  
ZOOM  
。  
-可變更畫面放大的倍22  
-可顯或退出)初始  
6
設置、播放模式功能等的在屏顯示選單。  
HOME MENU  
13 MENU  
-按下可顯DVDUSB單  
或導覽器  
24。  
18 頁  
-可開始自MCACC定  
SHIFT+MCACC  
9。  
-可開啟或關SR+第  
SHIFT+SR+  
33。  
音效控制  
7
14 RETURN  
-可返回至前一個選單畫面。  
-按下可CD質聲  
SOUND RETRIEVER  
-可輸出測試音調  
SHIFT+TEST TONE  
(用於揚聲器設置25。  
15 SLEEP  
音恢復成壓縮音頻來15。  
-選取環繞聲模14  
SURROUND  
頁)或切換至立體聲播第 15。  
- 可選取先Pioneer)  
按下以設置睡眠定37。  
ADVANCED  
原有的環繞聲模15。  
-可存取音效選單調整音調、低  
16 MUTE  
可將聲音關再按即可取消靜音。  
SOUND  
音及高低1416。  
17 VOLUME +/–  
可調整音量。  
播放控制  
8
請參閱第 11 頁的 基本播放控制、第 17 頁的  
碟片播放功能 以及23 頁的 USB有關  
這些控制的說明。  
按鍵  
9
這些按鍵可控Pioneer漿顯示器。  
TV CONTROL  
7
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
控制與顯示  
顯示屏  
1
2
3
4
5
6
PRGSVE SOUND  
DTS SURR.  
RPT -1  
kHz PGM  
MHz RDM  
2D  
2PL  
14 13 12 11  
10  
9
8
7
字元顯示屏  
1
DTS  
此燈於播DTS源期間會亮14。  
PRGSVE  
10  
11  
此燈在睡眠定時啟動時會亮37。  
2
在選取逐行掃描視頻輸出時會亮起  
27。  
12 ꢄ  
此燈在播放期間會亮起。  
3
SOUND  
在聲音修正器啟動時會亮第 15。  
SURR.  
13 2PL II  
此燈在 Dolby Pro Logic II 解碼期間會亮起  
14。  
4
在選取其中一種先進環繞聲聆聽模式時會亮起  
15 頁。  
14 2D  
此燈在播放Dolby Digital來源期間會亮第  
14。  
在重複播放期間會亮起。  
5
RPT  
RPT  
RPT-1  
在重複播  
RPT-1  
放單曲期間會亮第 19。  
PGM  
程序播放期間會亮20。  
6
調諧器指示燈  
-此燈在接收到廣播時會亮起。  
7
-此燈在自動立體聲模式期間接收到  
立體FM播時會亮起。  
-此燈在選取 FM聲道接收時會亮  
起。  
8
RDM  
隨機播放期間會亮20。  
kHz / MHz  
為指示字元顯示屏中所顯示的頻率單(  
9
kHz  
適用AM,  
MHz  
適用FM。  
8
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
開始操作  
2 章  
開始操作  
重要提示  
家庭劇院音效設置  
測試音量很大,但在設定期間請勿調低音  
量,以免降低最佳補正品質。  
請依照下圖方式擺放揚聲器,使其產生最佳環  
繞音請參閱揚聲器安裝指南取得更多關於  
擺設上的指示。  
MCACC 設置期確實不要移動麥克風及  
揚聲器。  
標準環繞聲 點設置-這是一種能提供最  
5
ZOOM  
佳5.1聲道家庭劇院音效的標準多聲道環繞  
聲揚聲器設置方式。  
CLEAR  
DISPLAY  
0
TV CONTROL  
SLEEP  
MUTE  
TUNE  
TOP MENU  
MENU  
INPUT  
SHIFT  
CHANNEL VOLUME  
STANDBY  
/ON  
TUNER  
DVD/CD  
USB  
(FM/AM)  
SETUP  
ST  
SR  
OPEN/  
CLOSE  
VOLUME  
ST  
ENTER  
LINE  
HOME  
MENU  
左前置  
右前置  
中置  
RETURN  
AUDIO  
SUBTITLE  
ANGLE  
MCACC  
SOUND  
TUNE  
TEST TONE  
1
2
5
8
3
6
9
RETRIEVER SURROUND ADVANCED SOUND  
重低音  
4
7
ZOOM  
聆聽位置  
連接麥克風至後面板上的  
1
孔。  
MCACC MIC  
左環繞  
右環繞  
設置好揚聲器參閱下列 使Auto MCACC  
設置功能, 以產生最佳的環繞聲效果 完成您  
的環繞音效設定。  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
AM LOOP  
MCACC  
IN  
S-VIDEO  
Y
VIDEO OUT  
MIC  
HDMI OUT  
CONTROL  
請將麥克風放在您一般聆聽的位置上。  
請將其置於大約耳朵的高度,並最好利用桌子  
2
Auto MCACC  
以產生最佳的環繞聲效果  
使用  
設置功能,  
或椅子以確保水平。  
多聲道音場自動補(MCACC) 系統可測量您聆  
聽區域內的音場特性,將周遭雜訊納入考量,  
並測試聲道延遲及聲道音量。在您完成系統附  
贈的麥克風設置後,接收器便可使用來自一連  
串測試音調的資訊,將揚聲器設定值及等化效  
音場補正等化功能)調整至最符合個人特  
確定揚聲器與麥克風之間沒有任何障礙物。  
系統若已關機,請按下  
3
將電源打開。  
若選取選台器,請切換輸入來源。  
STANDBY/ON  
4 按下 SHIFT+MCACC。  
在按下 SHIFT+MCACC 後,請儘量保持安靜。  
1
別房間條件的狀態。  
音量會自動提高,同時系統會輸出一連串測試  
音調。  
附註  
1只需要使用 Auto MCACC置一次 (除非您的揚聲器擺置或室內陳設有所變動。  
9
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
開始操作  
按下  
取消並回復先前的自  
SHIFT+MCACC  
MCACC定值。  
如果雜音音量太,  
按鍵  
按鍵功能  
選取反白的選單項目  
ENTER  
RETURN  
字樣便會在螢幕  
NOISY  
返回主選單不做任何變更  
中顯示約 5鐘時退出並檢查雜音音  
1
按  
在  
SHIFT+MCACC  
樣出現於螢幕上試一下  
RETRY  
ENTER  
提示  
如果您在螢幕上見到  
ERR MIC ERR SP  
在OSD畫面下方的按鍵指南可告訴您操作畫  
面所需使用的按鍵。  
訊息字表示您的麥克風或揚聲器在連  
接上有問題。要再試一次時,請您在見到  
2
字樣時,按下  
ENTER  
RETRY  
碟片播放  
DVDCDVCD/級 VCDDivXWMA/  
MCACC 設定完成時,音量會恢復正常且顯示幕  
3
會顯示 COMPLETE ,表示 MCACC 設定完成且  
MP3/MPEG-4 AAC光碟的基本播放控制均已涵  
4
音場補正等化功能已啟動。  
蓋於此。  
進階功能會在4中詳細說明。  
1 如果播放機尚未開機,請將它開機。  
如果您正在播放含有影像的碟片,請同時將電  
視機打開並確定設置的是正確的視頻輸入。  
(OSD)  
使用在屏顯示畫面  
為了使用方便,本系統採用了大量圖形化的在  
屏顯示畫(OSD)。  
按下  
以置入碟片。  
OPEN/CLOSE  
2
所有畫面的導覽方式基本上並無不同,請使用  
鍵變更反白項ENTER  
標籤面朝上置入碟片,利用碟片導槽對準碟片  
(如果您置入的是雙面 DVD 碟片,置入時請將  
想要播放的一面朝下。  
5
完成選取。  
重要提示  
整本手冊選取」是指使用游標按鍵反白  
之意。  
在屏畫面中的項目,再按下  
ENTER  
按鍵  
按鍵功能  
顯示/退出在屏顯示畫面 (OSD)  
HOME  
MENU  
ꢂꢀꢁꢃ  
變更反白的選單項目  
附註  
1室內環境並非完全適合自動環繞聲設定 (雜音、牆壁迴音太多,有障礙物擋在揚聲器與麥克風之間),最終設定值可  
能會不正確。請確認家電用品 (空調、冰箱、電風扇等)是否會影響環境,並視需要將它們關閉。  
些舊式的電視機可能會干擾到麥克風的操作。若發生此種情形,進行自動環繞聲設定時,請將電視機關閉。  
SHIFT+MCACC  
ERR  
訊息所代表的問題,然後再嘗試一次自動 MCACC設  
2 若仍未能有所改善,請按下  
定。  
將電源關閉,並確認  
COMPLETE  
3 如果螢幕上並未顯示  
字樣,則表示可能在設置期間有錯誤發生。請檢查所有接線並再試一次。  
4 請參閱15使用 「音場補正等化功能」聆聽 開啟/關閉音場補正等化功能。  
5 螢幕保護程序會在系統閒置五分鐘後出現。  
10  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
開始操作  
按下 (播放)以開始播放。  
3
按鍵  
按鍵功能  
如果您播放的DVDVCD/VCD,便會出  
現一選DVD-Video 碟片選單 12  
頁的 VCD/VCD PBC內容,以熟知導  
覽的方法。  
數字鍵  
可用以輸入標題/章節/曲目的編號。  
按下  
鍵以作出選擇。  
ENTER  
果碟片停止,則會從所選標題  
(DVD)或曲目 (CD/VCD/VCD)  
的開頭處開始播放。  
若是您置入的碟片當中含JPEG則會開始幻  
燈片展與其相關的更多資訊,請參閱17  
頁的 JPEG燈片秀 的內容。  
果碟片正在播放,則會從所選標  
題 (VRDVD-RWDVD-  
Video)或曲目 (CD/VCD/VCD)  
的開頭處開始播放。  
若光碟內DivX 視頻及其他媒體檔案類型  
(例如MP3先請從螢幕操作畫OSD)  
中選取要播DivX頻檔DivX其  
他媒 體檔 案類 型MP3/WMA/JPEG/  
MPEG-4 AAC。  
恢復播放及最後記憶播放  
您停止播放碟片時,RESUME 字樣會出現在螢  
幕中,表示您可以從該點位置來恢復播放。  
DVDVCD/VCD即使退播  
4 音量調整。  
VOLUME  
2
放位置亦會儲存在記憶體次您置入碟片  
請使用  
來控制音量。  
時,螢幕上即會顯LAST MEM 的字樣,同時  
讓您從此恢復播放。  
基本播放控制  
如果您想要清除恢復播放的位置,請在螢幕上  
RESUME 的字樣時,按(停止。  
下表中列有遙控器上用以播放碟片的各項基本  
1
可以在4章找到其他的播放功。  
按鍵  
按鍵功能  
碟片選單  
DVD-Video  
許多 DVD-Video 碟片內含您可以選取想要觀賞  
開始/恢復正常播放。  
RESUME  
的字樣,則播放作業便會從恢復  
LAST  
果螢幕上顯示  
MEM  
內容的選單。  
有時,DVD-Video 選單會自動在您開始播放時  
顯示在螢幕上;其他碟片只會在您按MENU  
TOP MENU 時才會顯示。  
播放或最後記憶的位置開請參閱  
下列 恢復播放及最後記憶播。  
暫停/繼續播放碟片。  
按鍵  
按鍵功能  
可停止播放或取消恢復播放功能  
RESUME  
(如果螢幕上顯示  
字樣。  
DVD片的 「上層選單」-  
此項功能會視碟片而有所不同。  
TOP MENU  
按下可開始向前快轉。  
按下可開始向後快轉。  
可顯DVD片選單-這會依碟  
片而有所不同,同時可能與 「上  
層選單」功能相同。  
MENU  
可跳至目前曲目或章節的開頭,以及  
前一個曲目/章節。  
ꢂꢀꢁꢃ  
在畫面上四面移動游標。  
可跳至下一個曲目或章節。  
附註  
1您播放某些 DVD 碟片時,您會發現有些播放控制可能無法用來播放碟片中的某些部分。  
2後記憶播放功能可能不適用某些碟片。  
於 DVD-Video片 (VR 模式 DVD-R/RW),本機可儲存最後五片的播放位置。  
11  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
開始操作  
TUNE +/–  
,直到所顯示的  
自動調諧:按住  
按鍵  
按鍵功能  
頻率開始變動為然後將按鍵放旦  
找到下一個電台調諧器即會停止動重  
複步驟以繼續搜尋。  
選取目前選單上的選項。  
ENTER  
RETURN  
數字鍵  
返回前一個顯示的選單畫面。  
可選取編有號碼的選單選項 (僅  
高速調諧:按住  
直到顯示  
TUNE +/–  
ENTER  
適用於某些碟片按下  
鍵以作出選擇。  
的頻率開始快速變動為止。繼續按住按,  
直到您找到所需要的頻率有必使  
用手動調諧功能來微調頻率。  
VCD/  
VCD/VCD有您可從中選取想要觀賞  
VCD PBC  
選單  
超級  
FM  
改善  
接收不良  
內容的選單。這些便PBC(播放控制。  
如果您正在以立體聲收FM接收卻很  
微弱,那麼您可以將它切換成單聲道來改善聲  
音的品質。  
您可以直接利用數字鍵選取曲目,不用按下  
(播放鍵來開始播無須導PBC選  
單,便可播放整PBC VCD/VCD。  
調選至  
廣播電台,然後按下  
FM  
1
按鍵  
按鍵功能  
SHIFT+SETUP  
PBC單。  
RETURN  
數字鍵  
使用  
以選擇  
,然後按下  
2
ꢂ/ꢃ  
FM MODE  
FM MONO  
選取編有號碼的選單選項。按下  
鍵以作出選擇。  
ENTER  
ENTER  
使用  
以選取  
ꢀ/ꢁ  
,然後按下  
3
顯示前一個選單頁 (如果有的  
。  
ENTER  
調諧器在道接收模式下,單指示燈  
顯示下一個選單頁 (如果有的  
。  
( )會亮起。  
FM AUTO  
選取  
以切換回自動立體聲模收  
聽立體聲廣播體聲指示亮起。  
聆聽收音機  
調諧器可以接 FMAM 兩種廣播,並讓您能夠  
將自己愛聽的電台記憶下來,這樣就不必每次  
在要收聽時還得動手調選。  
抑制  
接收雜訊  
AM  
AM 接收情況非常不好,或正在收聽AM電  
台太過吵雜,則請嘗試使雜訊抑制能  
調整至較佳的音質。  
按下  
1
以選取  
以切換調諧器,然後連續按  
TUNER  
波段。  
FM  
螢幕此時會顯示波段及頻率。  
AM  
調諧至  
廣播電台,然後按下  
AM  
1
SHIFT+SETUP  
調選需要的頻率。  
2
這裡有三種調諧模式-手動、自動及高速:  
2 使ꢂ/ꢃ 鍵選NOISECUT,然後按下  
ENTER  
手動調:連續TUNE +/– 以改變所顯示  
的頻率。  
3 使ꢀ/ꢁ 選取雜訊抑制模式,然後按下  
ENTER  
1到3間的效果位準。  
12  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
開始操作  
記憶電台  
您可儲存多30預設電讓您永遠可以輕  
輕鬆鬆便能收聽喜愛的電台,而無須每次都要  
動手調選。  
1 調諧AM FM 廣播電台。  
依需要選取單聲道或自動立體聲接FM)或  
雜訊抑制模AM這些設定值會與預設值  
一併儲存。  
2 SHIFT+SETUP 鍵並用 ꢂ/ꢃ 鍵選擇  
ST.MEM.然後按下 ENTER。  
3
ꢀ/ꢁ  
以選取您要收聽的預設電台,  
使用  
然後按ENTER。  
收聽預設電台  
1 確定已選TUNER 功能。  
2
ST +/–  
按鍵以選取一預設電台。  
使用  
您也可以使用數字鍵來選取預設電台。  
聆聽其他來源  
可將輔助來電視機、衛星接收器等)連接  
至本機上,透過揚聲器系統播放。與其相關的  
更多資訊,請參閱31連接輔助音頻設  
的內容。  
要將一USB裝置連接至USB端子參閱第  
23USB。  
確定外部來衛星接收器等)已經  
1 TV  
開機。  
按下  
以選取來源。  
2
LINE  
3 如有必要,可開始播放來源。  
13  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
用心聆聽您的系統  
第 章  
3
用心聆聽您的系統  
(Dolby Pro Logic II Music)可  
MUSIC  
自動聆聽模式  
Pro Logic II 5.1道環繞音效,特  
別適合音樂來適用於雙聲道來源)  
自動聆聽模式是聆聽主要控制的任何來源最簡  
單的方法:自揚聲器的輸出反映出來源題材中  
的通道。  
-請參閱下列 以立體聲聆聽 乙節  
STEREO  
說明  
TUNE  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
Dolby Pro Logic II Music  
設定值  
1
Dolby Pro Logic II Music 模式聆聽時,  
您可以調整三項設定值:中置寬度、尺寸及全  
景。  
按下  
以選取  
聆聽模。  
AUTO  
SURROUND  
以環繞聲聆聽  
模式啟動下,  
Dolby Pro Logic II Music  
1
按下  
2
您可以環繞聲來聆聽立體聲或多聲道來環  
繞聲來自於採用某Dolby Pro Logic碼模  
式的立體聲來源。  
SOUND  
使用  
以選「  
」、  
C WIDTH  
2
ꢂ/ꢃ  
「  
確認。  
然後按下  
PANORAMA  
DIMEN  
ENTER  
TUNE  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
(中置寬度藉由伸展右前置  
C WIDTH  
1
與左前置揚聲器之間的中置聲供更為  
寬廣的前置揚聲器範圍,來產生更高  
設定值)或更低設定值)的音效。  
連續SURROUND以選取一種聆聽模。  
顯示屏中所出現的選擇會依播放的來源類型而  
有所不同。  
(尺寸可調整由前到後的環繞  
DIMEN.  
AUTO  
-自動聆聽模如前述)  
音效平音效聽起來更負設定值,  
或更正設定值。  
(Dolby Pro Logic) -可產生  
DOLBY PL  
4.1道環繞音適用於雙聲道來源)  
(Dolby ProLogic IIMovie)-Pro  
-可延伸前置立體聲映像以  
PANORAMA  
涵蓋環繞揚聲器,產環抱」的效果。  
MOVIE  
Logic II 5.1道環繞音效,特別適合電  
影來可用於任何一種雙聲道來源)  
附註  
1 若來源為 Dolby Digital DTS,則前面板顯示幕中的相對指示燈會亮起。  
2 注意:選取選台器時,無法進行多聲道播放。  
14  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
用心聆聽您的系統  
使先進環繞聲」功能  
先進環繞聲音效可用在任何一種多聲道或立體  
使音場補正等化功能」聆聽  
您可以使用9 使Auto MCACC置功  
能, 以產生最佳的環繞聲效果 中所設定的音  
1
聲來源上,提供多樣特殊的環繞聲效果。  
2
TUNE  
場補正等化功能聆聽來源。  
TEST TONE  
SOUND  
RETRIEVER SURROUND ADVANCED SOUND  
按下  
並使用  
然後按下  
選取  
1
SOUND  
ꢂ/ꢃ  
ENTER  
MCACC EQ  
按下ADVANCED以選取一種先進環繞聲模  
式。  
使用  
以選取  
(等化器關閉然後按下  
(等化器啟動)  
2
ꢀ/ꢁ  
EQ ON  
EQ OFF  
ENTER  
連續按以選ADVMOVIEADVMUSIC、  
EXPANDEDTV SURR.SPORTSGAME、  
VIRTUAL 5 STEREO。  
確認。  
若選取  
,等化功能會設定為關閉,  
EQ OFF  
但揚聲器設定聲道延遲及聲道位準)  
仍然有效。  
以立體聲聆聽  
自動 MCACC 設定完成時,會自動選取  
EQ  
您可以在立體聲音效下聆聽任何一種來源─立  
體聲或多聲道。在播放多聲道來源時,所有聲  
道會經縮混後傳送至前置左/右揚聲器及重低  
音之中。  
ON  
使聲音修正器」功能  
TUNE  
TEST TONE  
SOUND  
音頻資料WMA/MP3/MPEG-4AAC縮過程移除  
時,聲音品質通常會出現不均勻的音像聲  
音修正器」功能採用最新的 DSP術,能藉由  
恢復聲壓及修整壓縮後所留下的人工缺陷,將  
CD質的聲音恢復成壓縮的雙聲道音頻。  
RETRIEVER SURROUND ADVANCED SOUND  
連續SURROUND 直到顯示屏中出現  
STEREO 的字樣為止。  
SOUND RETRIEVER  
聆聽立體聲來源下  
戴上耳機聆聽  
開啟或關閉聲音修正器功能。  
在戴上耳機使用的模式只STEREO(預  
設值)PHONES SURROUND (耳機專用虛  
擬環繞聲。  
耳機接上時,按下  
以選取  
ADVANCED  
」或  
以選  
SURROUND  
PHONES SURROUND  
取「  
」。  
STEREO  
附註  
1意:選取選台器時,無法進行多聲道播放。  
2場補正等化功能在戴上耳機時不會有所作用。  
15  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
用心聆聽您的系統  
加強對白  
「對白強化」功能是為突顯電視或電影原聲帶  
加重低音音量  
本機共有二種低音模式,您可用來增強來源中  
1
背景音效的對白而設計的。  
的低音音量。  
1
SOUND  
ꢂ/ꢃ  
選取  
按下  
並使用  
按下  
並使用  
然後按下  
選取  
1
SOUND  
ꢂ/ꢃ  
DIALOGUE  
ENTER  
,然後按下  
以選取對話加強的程度,然後  
ꢀ/ꢁ  
ENTER  
BASSMODE  
使用  
2
按下  
選取  
使用  
鍵確認。  
鍵調整聲音,然後按下  
2
ꢀ/ꢁ  
ENTER  
ENTER  
確認。  
OFF MID MAX  
選取  
OFF  
(劇院。  
(關(音樂或  
MUSIC CINEMA  
使音調控制」功能  
您可利用音調控制選單變更聲音的音調平衡。  
1 按下 SOUND 並使用 ꢂ/ꢃ 選取  
TONE然後按ENTER。  
使用  
選取想要調整的選項,然後按  
ꢀ/ꢁ  
2
ENTER  
「低音」/「高音寂靜」及「午夜」等功  
能無法同時使用。  
調整低音及高音  
使用音調控制調整低音及高音。  
使用  
「  
」或「  
」,  
ꢂ/ꢃ  
ꢀ/ꢁ  
BASS  
TREBLE  
然後使用  
整。  
調整音調。按下  
ENTER  
確認調  
「寂靜」午夜」模式  
寂靜聆聽功能可降低聲音來源中過度的低音或  
高音。  
午夜聆聽功能可讓您以低度的音量聆聽效果強  
勁的電影環繞聲。  
在按下 ENTER 可開啟/關閉設定。  
要取寂靜」午夜」聆聽模式,請  
選取 BASS/TRE。  
附註  
1 低音模式在戴上耳機時不會有所作用。  
16  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
4 章  
碟片播放功能  
播放期間,按下 (暫停)鍵。  
1
2
重要提示  
按住  
鍵,直到開始慢動  
ꢌ/ꢍ  
ꢊ/ꢋ  
即使某些功能的實際操作會因置入的碟片  
種類而有些許上的差章所涵蓋的許多  
功能仍可適用DVD片、VCD/VCD、  
CD、DivX 視頻以及 WMA/MP3/MPEG-4 AAC/  
JPEG片。  
作播放為止。  
連續按以變更慢動作播放速如屏幕所示。  
2
要恢復播放,按下 (播放)鍵。  
DVD限制某些功例如隨機或重複  
播放碟片的部分或全部的使這並不  
是故障。  
格進/格退播放  
您可以逐格向前或後退的方式播放 DVD 碟片。  
對於 VCD/VCDDivX頻,您只可以使  
用格進播放。  
在播放VCD/超級VCD些功能在PBC播放  
期間並不適如果您想要使用這些功能,  
請使用數字鍵選取曲目來開始碟片的播。  
1 播放期間,按下 (暫停)鍵。  
按下  
以後退或前進的方  
ꢌ/ꢍ  
2
式一次一格播放。  
ꢊ/ꢋ  
2
碟片掃描  
您可以各種的速度向前或向後快速掃描碟片。  
要恢復播放,按下 (播放)鍵。  
1
播放期間,按以開始掃描。  
連續按以增加掃描速如屏幕上所示。  
播放 幻燈片秀  
在置入內含 JPEG片的碟片後,請按下  
JPEG  
2
要恢復播放,按(播放)鍵。  
開始從碟片上的第一個資料夾/圖片開始幻燈  
3
片展示機會按字母順序來顯示每一個資料  
夾中的圖片。  
慢動作播放  
若該裝置內含WMA/MP3/MPEG-4AAC檔,  
則幻燈片展示及音頻檔案會不斷重複播。  
您可以四種慢動作速度來播DVD、VCD/ 超級  
VCDDivX頻。DVD 碟片還可以反向慢動作  
播放。  
音頻播放期您仍然可以使用跳過(  
(  
( )  
等各項功能。  
圖片會自動調整以盡量填滿整個螢幕畫面。  
附註  
1DivX 視頻碟片僅適用一種速度。  
2碟片而定,正常的播放會在讀取到 DVD 碟片上新的章節時,自動恢復。  
為 PBC式下的 VCD/VCD 或一 WMA/MP3/MPEG-4 AAC目,則會從該曲目的最終或最前位置自動恢復播放。  
3機將一份檔案載入的時間會隨著檔案容量愈大而增加。  
張光碟可包含多299 個資料夾648 個合併的資料夾與檔案。  
17  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
幻燈片秀播放時:  
可以使用的選項視置入的碟片種類及是否要播  
放碟片而定,然而仍包含:  
按鍵  
按鍵功能  
標題DVD-Video片中的標題。  
可暫停幻燈片展示 (或音頻)的  
播放,再按時可再度開始播放。  
章節-指 DVD-Video 碟片目前標題中的章  
節。  
可跳至前一張圖片 (或音頻檔案  
的音頻播放。  
曲目VCD/VCD片中的曲目。  
時間VCD/VCD片中10鐘  
一個的縮圖。  
可跳至下一張圖片 (或音頻檔案  
的音頻播放。  
ꢂ/ꢃ/ꢀ/ꢁ  
可暫停幻燈片秀的播放,並旋轉  
/翻動所顯示的圖片 (按下  
Original:  
原始標題。  
標題VR模DVD-RW碟片中的  
(播放)鍵以再度開始播放幻  
標題VRDVD-RW碟片中的  
Playlist:  
播放清單標題。  
燈片秀。  
可暫停幻燈片秀的播放,並將圖  
片放大。再按時可切換 1x、2x及  
ZOOM  
MENU  
時間-指原始內容中10鐘一  
Original:  
個的縮圖。  
4x放大倍數 (按下 (播放)  
鍵以再度開始播放幻燈片秀。  
時間-指播放清單中每 10鐘一  
Playlist:  
個的縮圖。  
可顯碟片導向」畫面  
(參閱以下圖。  
整個螢幕畫面前後一次最多可接連顯示六張縮  
圖影像。要顯示前一組/下一組六張縮圖,按  
/
ꢈ ꢉ  
使碟片導向」瀏覽  
DVD  
3 選取您要播放的縮圖影像。  
超級  
使碟片導向」可瀏覽整張 DVD VCD/超  
碟片  
VCD  
VCD/  
01  
04  
02  
05  
03  
06  
VCD片的內容,找到您想要播放的部分。  
播放期間,按下  
選單中選碟片導向。  
並從在屏  
HOME MENU  
1
碟片導向: 標題  
01- 49: --  
碟片導向  
您可使ꢀ/ꢁ/ꢂ/ENTER 鍵或數字鍵選  
取縮圖。  
選擇檢視選項。  
2
要使用數字鍵選取時,請輸入兩位數字,然後  
按下  
碟片導向  
標題  
ENTER  
章節  
18  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
提示  
可利碟片導向」功能瀏覽  
在聆WMA/MP3/MPEG-4AAC的播放可  
以同時播JPEG燈片展示。只須選取想  
要聆聽的音頻檔案,再選取想要播放幻燈  
片展示的 JPEG案即此時幻燈片展示  
及音頻檔案會同時不斷重複播放。各項播  
放控制僅適用JPEG燈片展示。  
WMAMP3MPEG-4 AAC、  
DivX 視頻JPEG 等檔案  
使碟片導向」按照檔名尋找一特定的檔案  
或資料夾。  
1 HOME MENU 並從在屏顯示選單中  
碟片導向。  
要播放整張碟片而不是只有目前資料夾的  
內容,請先退碟片導向然後使用  
00:00/ 00:00  
0kbps  
(播放)按鍵來開始播放。  
Folder1  
Folder2  
Folder3  
Folder4  
循環播放碟片某個片段  
A-B 重複功能可讓您指定一影音CD、VCD/  
超級 VCD)或一標DVD)中的兩A 及  
B來一直不斷地循環播放。  
2 使ꢀ/ꢁ/ꢂ/ꢃ ENTER 來瀏覽。  
使用  
可上下移動資料夾/檔案清單。  
ꢀ/ꢁ  
1
播放期間,按下  
1
「播放模式。  
並選取  
HOME MENU  
使用  
以回到根資料夾。  
使ENTER 可開啟一反白的資料夾。  
播放模式  
當反白JPEG檔便有一縮圖影像顯示在螢  
幕右側。  
選取 「 重複。  
開始點」上按下  
2
3
A-B  
00:00/ 00:00  
Folder2  
0kbps  
以設置循環  
以設置循環  
ENTER  
ENTER  
播放的開始點。  
結束點」上按下  
播放的結束點。  
File1  
File2  
File3  
File4  
File5  
4
在按下 後,播放作業會跳回至開始點,  
ENTER  
然後開始循環播放。  
3
DivX  
視頻檔案或  
要播放反白的影音軌或  
5 要恢復正常播放,請選。  
顯示反白JPEG 檔案時,可按ENTER。  
當已選WMA/MP3/MPEG-4AACDivX頻  
會自該檔案開始播放到整個資料夾  
結束為止。  
使用重複播放功能  
除了各種的重複播放選項外,也可以將重複播  
放同程序播放一起使請參閱20建  
立程序編輯清單。  
當選取JPEG燈片秀即會開,並  
從所選檔案開始播直到整個資料夾播  
放完為止。  
附註  
..  
1也可以進入最上層的 「 」資料夾,然後按下  
ENTER  
來完成此項動作。  
19  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
1
「播放模式。  
HOME MENU  
並選取  
播放期間,按下  
按鍵  
按鍵功能  
可返回至目前曲目/標題/章節  
的開頭,再按時可隨機選取其他  
的曲目/標題/章節。  
1
選取 「重複然後選取重複播放選項。  
2
如果程序播放功能啟動,可選取重複播放程式  
來重複播放程序編輯清單,或選取關閉重複播  
取消重複播放。  
隨機播放會繼續執到您從隨機播放選  
單選項中選取了隨機播放關閉為止。  
播放 DVD選取重複播放標題重  
複播放章。  
建立程序編輯清單  
本項功能可讓您編輯碟片上標題/章節/曲目  
CDVCD/超VCD選取重複播放  
單碟重複播放曲目。  
3
的播放順序程序。  
DivX頻碟片選取重複播放標題  
(或關閉重複播放。  
1 播放期間,按HOME MENU 並選取  
「播放模式。  
2
程序編輯」然後從程序編輯選項清  
單中選編序創建/編輯。  
使用隨機播放功能  
可使用此項功能以隨意的順序來播放標題或章  
使用 及 以選取一標  
3
ꢀ/ꢁ/ꢂ/ꢃ  
ENTER  
題、章節或曲目作為目前在節目清單中的步  
2
DVD-VideoCDVCD/超VCD。  
驟。  
DVD片,您還可以增加標題或是章節。  
1
「播放模式。  
HOME MENU  
並選取  
播放期間,按下  
CDVCD/VCD選取曲目加到程  
序編輯清單之中。  
選取 「隨機然後選取一選項。  
播放 DVD選取隨機播放標題隨  
機播放章。  
2
在按下  
選取標題/章節/曲目序  
ENTER  
步驟編號會自動向下移動一位。  
CDVCD/超VCD選取以  
開啟或關閉隨機播放功能。  
4 請重複步3 以建立一程序編輯清單。  
一份程序編輯清單中可包含多達 24 個編序步  
驟。  
提示  
您只須將您想顯示新編序步驟的位置加以  
反白再輸入標題/章節/曲目編便可插  
入編序步驟。  
隨機播放期間使用以下控制功能 :  
按鍵  
按鍵功能  
隨機播放下選取一新的曲目/標  
題/章節。  
要刪除編序步將其反白後按下  
即可。  
CLEAR  
附註  
1 WMA/MP3/MPEG-4 AAC 光碟無法使用重複播放。  
2可以在碟片播放或停止的同時,設置隨機存取的選項。然而,您無法將隨機播放搭配程序播放一起使用。  
不能使用隨機播放來播放 VR式 DVD-RW 碟片、WMA/MP3/MPEG-4 碟片、DivX 視頻碟片,或在 DVD片選單已顯示的情  
況下使用。  
3 VRDVD-R/RW 光碟、WMA/MP3/MPEG-4 AAC 光碟、DivX頻光碟或 DVD碟選單顯示時,無法使用程序播放功能。  
20  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
要播放程序編輯清單,請按下 (播放)  
選取搜索模式。  
碟片必須按序播放以便使用時間搜索功。  
5
鍵。  
3
程序編輯清單會繼續存在,直到您關閉程序播  
參閱以下說明刪除程序編輯清參  
閱以下說明退出碟片或關機為止。  
4 使用數字鍵輸入標題、章節或曲目編號,  
或時間。  
使用時間搜索時,請按照您想要恢復播放  
的位置來輸入目前播放標題 (DVD/DivX視  
頻)或曲目(CD/VCD/ 超VCD)的分鐘數  
及秒數。例如,按下 4500 即會從  
提示  
程序播放期間使用以下控制功:  
碟片上的45鐘位置開始播放。想要輸  
入1 時、2030時,可按8、  
030。  
按鍵  
按鍵功能  
可儲存程序編輯清單並退出但不  
播放。  
HOME  
MENU  
5
ENTER  
來開始播放。  
按下  
可跳至程序編輯清單中的下一個  
編序步驟。  
切換字幕  
DVDDivX頻碟片擁有一種以上語  
言的字幕;在碟片包裝上會清楚告訴您可以使  
用的字幕語言種類。您可以在播放期間來切換  
程序編輯選單中其他可用的功能  
在程序編輯選單中尚有除了編序創建/編輯以  
外的其他選項。  
1
字幕語言。  
編序播放開始-可開始播放儲存的程序編  
輯清單  
連續按  
以選取一種字幕選項。  
SUBTITLE  
要設置字幕的喜好設定,請參閱28的  
語言設定值 的內容說明。  
編序播放停止-可關閉程序播不會刪  
除程序編輯清單  
更多關於 DivX幕的資參閱39頁  
DivX幕檔案 的內容說明。  
編序刪除-可刪除程序編輯清單並關閉程  
序播放  
切換語言/聲道  
在播放錄有兩種以上語言對白內容,或錄有雙  
搜索碟片  
2
您可以按標題或章節編按時間來搜DVD  
碟片;CDVCD/ 超級 VCD按曲目編號或時  
間;DivX頻碟片則可按時間來搜索。  
單聲道音效的碟片時 您可以在播放期間來切  
3
換這些功能。  
連續按 AUDIO 以選取一種聲音語言選項。  
要設置聲音語言的喜好設參閱第28頁  
語言設定值 的內容說明。  
按下  
並選播放模式。  
1
2
HOME MENU  
搜索模式。  
所呈現的搜索選項會視置入的碟片種類而。  
附註  
TOP MENU  
MENU  
鍵即可進入選單。  
1些碟片僅允許您從碟片選單中來改變字幕語言。按下  
2些超級 VCD 錄有兩種音軌。在播放這些碟片時,您可以切換這兩種音軌,以及每個音軌獨有的聲道。  
TOP MENU MENU  
3些碟片僅允許您從碟片選單中來改變聲音語言。按下  
鍵即可進入選單。  
21  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
碟片播放功能  
放大畫面  
使用放大功能,您可以在觀賞 DVD、DivX 視頻  
標題VCD/VCDJPEG,將  
畫面某個部位放2 4。  
播放期間,使用  
按鍵以選取放大  
ZOOM  
1
的倍正常、 或 。  
2x  
4x  
使用  
來變更縮放區域。  
2
您可以在播放期間自由切換放大倍數,以及放  
ꢀ/ꢁ/ꢂ/ꢃ  
1
大區域。  
切換拍攝角度  
某些 DVD 碟片錄有以兩種上角度拍攝而成的場  
景-請參閱碟片包裝上的詳細說明。  
在播放多角度場景幕上會出現  
的圖示  
(您也可以選擇將它關閉-請參閱第28頁顯  
示屏設定值。  
播放期或暫停時ANGLE 以切  
換角度。  
顯示碟片資訊  
播放期間,可將各種曲目、章節及標題的資訊  
顯示在螢幕上。  
要顯示/切換/隱藏顯示的資連續按  
DISPLAY  
有限的碟片資訊亦會出現前面板的螢幕中。按  
以變更所顯示的資訊。  
DISPLAY  
附註  
1於 DVD、VCD/級 VCD、DivX頻標題及 JPEG 圖片只有固定的解析度,因此畫質特別在放大 4x 時會有失真的情形。  
這並不是故障。  
ZOOM  
果畫面上方的導向方塊消失,可按  
再將它顯示在螢幕上。  
22  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
播放  
USB  
5 章  
USB  
播放  
重要提示  
若顯示幕中的  
使USB 介面  
利用本機前面USB 介面就可以聆聽雙聲道音  
訊息指示燈亮表  
USB ERR  
1
示該 USB 裝置的電源需求對於本機來說太高,  
或該裝置不相容。請嘗試以下方法:  
頻 並觀JPEG 檔案。按下圖方式連接USB  
2
大量儲存裝置 。  
關閉播放機,然後再開啟。  
1 開啟播放機後,按USB。  
確定電視機已開並設定為正確的視頻輸入。  
重新在播放機關閉時將 USB置接上。  
選取其他輸入來源(DVD/CD後回  
頭選取 USB。  
2 連接您USB 裝置。  
USB子的位置就在前面板上。  
使用原廠專用AC源變壓器(隨裝置附  
贈)供應 USB源。  
若上述方式無法解決問題,則應該是您的 USB  
裝置不相容。  
USB  
Type A  
基本播放控制  
下表為說明遙控器在 USB放方面所使用的一  
些基本控制。  
USB大量儲存裝置  
按鍵  
按鍵功能  
開始正常播放。  
暫停/解除暫停播放。  
停止播放。  
3 (播放)以開始播放。  
若是您USB置當中含有 JPEG則會開始幻  
燈片展與其相關的更多資訊,請參閱24  
頁的 JPEG燈片秀 的內容。  
按下可開始向前快轉。  
按下可開始向後快轉。  
可跳至目前播放檔案的最前面位置,  
再跳至前一個檔案。  
確定在脫離時(或系統在待機狀態下前  
USB DATA  
面板顯示幕上有顯示  
可跳至下一個檔案。  
附註  
1包括 WMA/MP3/MPEG-4 AAC案 (除含防拷內容或限制播放內容的檔案外)的播放。無法透過 USB子播放 DivX 檔案。  
2USB 裝置包括屬於 FAT16/32 格式的磁碟機、可攜式快閃記憶體 (特殊隨身碟)及數位音頻播放機 (MP3放  
本機不能連接至個人電腦上進行 USB 播放。  
Pioneer不保證所有 USB 大量儲存裝置的相容性 (操作及匯流排電源),亦不承擔連接至本機時可能造成資料遺失的  
相關責任。  
料含量很大時,系統會需要較長的時間來讀取 USB 裝置的內容。  
23  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
播放  
USB  
按鍵  
按鍵功能  
掃描檔案  
您可以各種的速度向前或向後快速掃描碟片。  
可顯導覽器」畫如下  
。  
MENU  
播放期間,按下  
連續按以增加掃描速如屏幕上所示。  
導覽器」瀏覽檔案  
使導覽器」按名稱搜WMA、MP3、  
1
要恢復播放,按下 (播放)鍵。  
3
MPEG-4 AACJPEG案或資料夾。  
1 MENU,然後使用 ꢀ/ꢁ/ꢂ/ꢃ 及  
ENTER 進行導覽。  
JPEG  
按下 可開始從第一個資料夾/圖片開始幻燈  
播放  
幻燈片秀  
使用  
上/下移動資料夾/檔案清單。  
ꢀ/ꢁ  
2
片展示。 每個資料夾中的圖片會依序顯示。  
4
使用  
以回到根資料夾。  
若該裝置內含WMA/MP3/MPEG-4AAC檔,  
則幻燈片展示及音頻檔案會不斷重複播。  
音頻播放期您仍然可以使用跳過ꢈ  
)  
等各項功能。  
使ENTER 可開啟一反白的資料夾。  
當反白JPEG檔便有一縮圖影像顯示在螢  
幕右側。  
2 要播放反白的曲目或顯示反白JPEG 檔  
圖片會自動調整以盡量填滿整個螢幕畫面。  
幻燈片秀播放時:  
案,請按ENTER。  
當已選WMA/MP3/MPEG-4AAC會自  
該檔案開始播放到整個資料夾結束為止。  
按鍵  
按鍵功能  
當選取JPEG燈片秀即會開並  
從所選檔案開始播直到整個資料夾播  
放完為止。  
可暫停幻燈片展示 (或音頻)的  
播放,再按時可再度開始播放。  
可跳至前一張圖片 (或音頻檔案  
的音頻播放。  
提示  
可跳至下一張圖片 (或音頻檔案  
的音頻播放。  
在聆聽WMA/MP3/MPEG-4 AAC的播放可  
以同時播JPEG燈片展示。只須選取想  
要聆聽的音頻檔選取想要播放幻燈片  
展示JPEG案即可。此時幻燈片展示及  
音頻檔案會同時不斷重複播項播放控  
制僅適用JPEG燈片展示。  
ꢂ/ꢃ/ꢀ/ꢁ  
可暫停幻燈片展示並旋轉/翻轉  
目前的圖按下 可重新開始  
幻燈片展示。  
可暫停幻燈片秀的播放,並將圖  
片放大。再按時可切換 1、2  
4的放大倍數 (按下  
ZOOM  
欲播放的不僅是目前的資料夾而是全部的  
(播放)鍵以再度開始播放幻  
內容時,請退導覽器」並使用 (播  
燈片秀。  
放)按鍵。  
附註  
1 如為 WMA/MP3/MPEG-4 AAC目,則會自動從該曲目的最終或最前位置自動恢復播放。  
2機將一份檔案載入的時間會隨著檔案容量愈大而增加。  
USB 裝置可容納多達 299資料夾,以及 648合併的資料夾及檔案。  
3 有些數位音頻播放機在顯示檔案名稱時可能會不正確。  
..  
4 您也可以進入最上層的 「 」資料夾,然後按下  
ENTER  
來完成此項動作。  
24  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
環繞音效設定值  
6 章  
環繞音效設定值  
聲道音量範圍為±10 dB。  
使設定」選單  
設定」選單上,可存取系統的所有環繞音  
揚聲器間距設定值  
可指定您聆聽位置至您揚聲器的距離。  
1
效設定包括聲道位揚聲器間距及動態  
出現在螢幕按下  
,然  
ENTER  
DISTANCE  
範圍調整等。自MCACC9)應能  
帶給您最佳的環繞音效設定。然而,您會發現  
藉由進一步調整環繞音效設定值,還能改善所  
在聆聽室內的環繞效果。  
ꢀ/ꢁ  
列的揚聲器:  
ꢂ/ꢃ  
切換下  
後使用  
調整間距,並按下  
-左前置揚聲器  
L  
-中置揚聲器  
C  
1 SHIFT+SETUP 並使用 ꢂ/ꢃ 及  
選擇想要調整的設定值。  
ENTER  
可使用的設定值如前面板顯示幕中所示。  
R -右前置揚聲器  
2
SR  
-右環繞揚聲器  
-左環繞揚聲器  
SL  
2 使ꢀ/ꢁ 進行調整,然後按ENTER 確  
認並退出。  
SW -重低音  
再度使用自MCACC(9)會覆  
蓋先前的揚聲器設定值。  
各揚聲器可調整在 0.3 公尺9.0 公尺之間。  
預設值3.0 公尺。  
「聲道位準」設定值  
動態範圍控制  
3
設置您主要聆聽位置的相對聲道音量。  
可指Dolby DigitalDTS效聲軌的  
動態範圍調整值:若無法正確聽到低階音效或  
對話的聲音,這可有助於提高低音效的音量,  
並有效控制高階的音量。  
使ꢂ/ꢃ 依下列順序切換聲道:  
-左前置揚聲器  
L  
-中置揚聲器  
C  
(預設值-無動態範圍調以  
DRC OFF  
R -右前置揚聲器  
-右環繞揚聲器  
較高音量聆聽時使用)  
-適中設定值  
SR  
SL -左環繞揚聲器  
DRC MID  
DRC HIGH-動態範圍縮大聲音效音量  
-重低音  
SW  
降低,而較靜音效音量增高)  
附註  
1設定選單上,還可調整其他的設定值;這些設定值會12改善 FM收不良 及第 37 調暗顯示幕亮度 中說  
明。  
2置五分鐘後,設定選單會自動退出。  
3取立體聲或虛擬聲播放 (或利用自動模式聆聽立體聲來源)時,無法調整中置/環繞聲道。  
機接上時無法設定聲道位準值。  
聲器音量可隨時按下  
進行調整,然後使用  
調整聲道位準。測試音會自動依上述順序從一揚聲  
ꢀ/ꢁ  
器移動至另一揚聲器。當坐在主要聆聽位置上,您應該會聽到來自每個揚聲器同樣音量的測試音調。在您完成時,按下  
SHIFT+TEST TONE  
ENTER。  
於重低音會產生超低階頻率,因此聽起來會比實際上的音量安靜一些。  
25  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
07  
「視頻調整」選單  
第 章  
7
「視頻調整」選單  
「視頻調整」選單  
視頻調整」的功能畫面中,您可以調整能  
3
面,或按  
ENTER  
HOME MENU  
按下  
以返視頻調整」功能畫  
退出功能畫面。  
影響影像呈現的設定值。  
按下  
視頻調整。  
並從在屏顯示畫面中  
1
HOME MENU  
視頻調整  
使用  
2
值。  
來完成設定  
ENTER  
ꢀ/ꢁ/ꢂ/ꢃ  
視頻調整  
銳度  
標準  
亮度  
0
0
對比度  
伽瑪  
0
色調  
色度等級  
0
您可以調整以下的設定值:  
銳度-可調整畫面邊緣的銳利精細、  
標準柔和)  
亮度-可調整整體呈現的亮(  
–20  
+20  
對比度-可調整亮與暗之間的對比呈現  
–16 +16)  
-可調影像暖度、  
)  
9
色調-可調整紅/綠平綠色 紅色  
9
色度等級-可調色彩呈現的飽和( 至  
–9  
+9  
使用  
來調整亮度、對比度、色調及色度  
ꢂ/ꢃ  
等級等設定值。  
亮度  
最小  
最大  
0
26  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
「初始設置」選單  
8 章  
「初始設置」選單  
按下  
DVD/CD  
1
使初始設置」選單  
「初始設置單提供音頻及視頻輸出設定、  
停止播放時,按下  
2
「初始設定。  
並選取  
HOME MENU  
成人鎖定,以及顯示設定值等。  
初始設置  
如果選項呈現淡出的灰色,則表示此時無法接  
受變更。此種情形通常是因為碟片正在播放的  
緣故。請停止碟片的播放,再變更設定值。  
3
定的設定值及選項。  
ꢀ/ꢁ/ꢂ/ꢃ  
ENTER  
以選取想要設  
使用  
所有設定值及選項將會在後續的內容中詳加說  
1
明。  
視頻輸出設定值  
設定值  
選項  
說明  
4:3 (Letter Box)  
電視機屏幕  
如果您使用的是傳4:3視機時,須設置此項。寬螢幕電影  
在播放時,上下兩側會有黑色條邊。  
(另請參閱41的  
畫面大小及碟片格式 的  
內容說明。)  
4:3 (Pan & Scan)  
如果您使用的是傳4:3視機時,須設置此項。寬螢幕電影  
在播放時會裁掉左右兩側一部分,以利填滿整個螢幕。  
16:9 (Wide)  
隔行掃描  
逐行掃描  
如果您使用的是寬螢幕電視機時,須設置此項。  
您的電視機若不適用於逐行掃描視頻時,須設置此項。  
色差視頻輸出  
(另請一併參閱32頁  
使用色差視頻輸出連  
的內容說明。)  
您的電視機如果適用於逐行掃描視頻時,須設置此請參  
閱您電視機操作手冊中的詳細說明再按一次  
確認  
ENTER  
(或按下  
取消設置。  
RETURN  
請注意,逐行掃描視頻僅可經由色差視頻插孔輸出。  
HDMI 解像度  
(請參閱34使  
1920x1080i  
1280x720p  
若電視機支1920 x 1080素隔行掃描,則請設定此項。  
若電視機支1280 x 720素逐行掃描,則請設定此項。  
用HDMI。)  
720x480p (NTSC) /  
720x576p (PAL)  
若電視機支720 x 480 (NTSC)720 x 576PAL素  
逐行掃描,請設定此項。  
* 預設值會配合電視格  
PAL/NTSC)改變。  
720x480i (NTSC) /  
720x576i (PAL)  
若電視機支720 x 480 (NTSC)720 x 576PAL素  
隔行掃描,請設定此項。  
附註  
1表中,預設值會以粗體字顯示:其他的設定值則會以斜體字顯示在螢幕上。  
些設定值,像是電視機屏幕對白語言字幕語可能DVD片並不具效用。通常這些設定值亦可從 DVD 的碟片選  
單中來完成設置。  
HDMI  
HDMI  
色彩設定值只有在您利用 HDMI頭將本播放機連接至 HDMI容設備時,才有必要進行設定。  
解析度與  
27  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
「初始設置」選單  
設定值  
選項  
說明  
色彩  
RGB  
色彩微弱時,可提供更亮麗的色彩及更深的黑此預設值  
適用HDMIDVI 設備)。  
HDMI  
(請參閱34使  
HDMI。)  
RGB  
使RGB」設定值時,若色彩太過飽滿,請設定此項。  
預設值會視連接的設  
*
備改變。  
色差  
可輸8-bit色差視頻格此預設值適用HDMI容設  
備)。  
語言設定值  
設定值  
選項  
說明  
對白語言  
(其他機種)/  
(台灣機種)  
若碟片上已有特定的語言聲軌,即會播放。  
同顯示的語言  
其他語言  
如果選取了碟片上語言,即會播放。  
選取所顯示以外的語請參閱46使用語言代碼清  
)。  
字幕語言  
(其他機種)/  
若碟片上的語言中有字幕,即會顯示。  
(台灣機種)  
同顯示的語言  
其他語言  
會顯示在碟片上選取的字幕語言。  
選取所顯示以外的語請參閱46使用語言代碼清  
)。  
DVD 菜單語言  
字幕語言連動  
可能的話,DVD 碟片選單會以和您所選字幕語言相同的語言顯  
示。  
同顯示的語言  
其他語言  
可能的話,DVD 選單會以所選的語言顯示。  
選取所顯示以外的語請參閱46使用語言代碼清  
)。  
字幕顯示  
字幕會按您所選的字幕語言顯示。  
在您播DVD片時,字幕會依預設方式保持關閉的狀態。  
顯示屏設定值  
設定值  
選項  
說明  
在屏顯示語言  
(其他機種)/  
(台灣機種)  
螢幕顯示畫面會按特定的語言顯示。  
同顯示的語言  
在屏顯示畫面會按所選的語言顯示。  
角度指示燈  
在播DVD片上的多角度場景期間,螢幕上會顯示相機圖  
示。  
不顯示多角度指示圖示。  
28  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
「初始設置」選單  
選項設定值  
設定值  
選項  
說明  
成人鎖定  
請參閱下列 成人鎖定 說明。  
DivX(R) VOD  
Display  
®
請參閱下列 DivX VOD 說明。  
設置/改變 「成人鎖定」  
成人鎖定  
預設等;預設密碼:;預設國家/  
地區代碼:us 2119)  
1
選取 「改變級別。  
使用數字鍵輸入您的密碼,然後按下  
2
為了讓您可以控制不讓您的小孩使用您的 DVD  
播放機觀賞影片,某些 DVD-Video 碟片結合有  
鎖定」的分級功能。如果您的播放機設  
置的等級較碟片為低,碟片便無法播放。  
ENTER  
選取新的等級並按下  
3
ENTER  
以鎖定在更高的層更多碟片  
連續按  
需要使用密碼)﹔ 按下  
以取消鎖定層  
某些碟片也有支/地區代碼」功能。  
本機無法播放這些碟片上的某些場景,視您設  
國家/地區代碼」而定。  
次。您不能鎖在等1。  
設置/變更 「國家/地區代碼」  
您可以從47國家/地區代碼清單 當中  
找到。  
登錄新密碼  
請輸入密碼以變成人鎖定」等級入  
1
「國家/地區代碼。  
1 選取 「國家代碼輸入密碼,然後按下  
ENTER。  
密碼。  
1
2
在此提供兩種設置的方法:  
ENTER  
選取國家/地區代碼,然後按下  
初始設置  
視頻輸出  
語言  
成人鎖定  
DivX (R) VOD  
密碼  
改變級別  
國家代碼  
顯示屏  
選項  
ꢀ/ꢁ  
鍵以變更  
按字母代碼選取:使用  
「國家/地區代碼。  
按數字代碼選取:按下  
鍵,然後使用數  
字鍵輸入 4數字國家/地區代碼。  
使用數字鍵輸入 位數字密碼,然後按下  
4
2
ENTER  
在退出碟片後,新國家/地區代碼」便立  
即生效。  
更換密碼  
要更改密碼,請先確認現有密碼,再輸入新的  
密碼。  
1 更換密碼輸入現行的密碼,然  
後按ENTER。  
2 輸入新密碼並按ENTER。  
附註  
1非所有種類的碟片都適用 「成人鎖定」功能,而且亦無須先輸入密碼才能播放。  
果您忘記密碼,您會需要將播放機重置才能登記新的密碼 (請參閱46重新設置系統)。  
29  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
「初始設置」選單  
DivX®VOD 內容  
DivX®VOD  
關於  
內容  
DivX VOD容僅能作一定時間的播。在  
您置入含有此DivX VOD容的碟片餘  
播放次數便會顯示在螢幕上,然後您便可以選  
擇要播放碟因此可以用上其中一種剩餘播  
放次數止播放。如果您置入的是含有  
期限已過的 DivX VOD 內例如,內容的剩  
為了DivX VOD(隨選視頻內容能在本機  
上播您必須先向您DivX VOD容供應商  
登錄本機的資料。您可以藉由產生一組 DivX  
VOD 登錄代碼,發送給您的供應商來完成登錄  
1
作業。  
餘播放次數是 0則螢幕上便會顯示  
Rental  
重要提示  
Expired  
(租期已過)的訊息。  
DivX VOD內容受DRM(數位版權管)系統所  
這會限制只有一些特登錄的裝  
置才能播放。  
如果您DivX VOD容允許不限次數的播放,  
那您便可以將碟片置入本機,並播放您常看的  
內容,螢幕上亦不會顯示任何訊息。  
如果您在本機內置入一片未經授權使內  
DivX VOD容的碟片,螢幕上即會顯示  
(授權錯誤的訊,  
Authorization Error  
同時內容亦無法播放。  
顯示您的  
登錄代碼  
DivX VOD  
按下  
並選初始設置。  
1
HOME MENU  
選取 「選項然後是 「  
DivX (R)  
2
」。  
VOD  
初始設置  
視頻輸出  
成人鎖定  
Display  
語言  
DivX (R) VOD  
顯示屏  
選項  
3 選取 「Display。  
螢幕上顯示您8數字登錄代碼。  
請記下代因為在向您DivX VOD應商登  
錄時會需要用到。  
附註  
1 重置本機 (請參閱46頁的 重新設置系統 中的內容說明)不致使您失去您的登錄代碼。  
30  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
其他接線  
9 章  
其他接線  
連接  
插孔至外部播放設備  
的類比輸出上。  
LINE AUDIO IN  
連接外部天線  
想要擁有外AM使56尺  
乙烯基金屬線並安裝在室內或室外。保留連接  
著的環型天線。  
可使RCA頭型立體聲連接線來連接。  
S-video 輸出  
如果您的電視機上有 S-video入,您可以使  
室外天線  
用此端子代替標準視頻輸出以得更好的畫質。  
使S-video 連接線連S-VIDEO OUT 至  
您電視機上S-video 輸入。  
室內天線  
(乙烯基塗料  
AM LOOP  
在插入前,請將插孔上的小三角對準插頭上的  
相同標示。  
金屬線)  
5 公尺 至 6 公尺  
要想擁有外部FM可使PAL接頭接  
上一FM線。  
S-VIDEO  
輸入  
ANTENNA  
PAL連接頭  
電視機  
連接輔助音頻設備  
使用立體聲類比輸入可連接卡式錄音座或MD播  
C
R/  
ANTENNA  
P
R
COENT  
DEO  
C
B/  
放機等外部設備,經由本系統播放。  
VIDEO  
P
B
FM  
UNBAL75  
AM LOOP  
IN  
S-VIDEO  
Y
MCACC  
MIC  
VIDEO OUT  
HDMI OUT  
CONTROL  
卡式錄音座等  
音頻輸出  
C
R/  
P
R
COMPONENT  
VIDEO  
FRONT  
R
R
LINE  
C
B/  
P
B
L
R
Y
SURROUND  
VIDEO OUT  
AUDIO IN  
S
31  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
其他接線  
使用色差視頻輸出連接  
如果您的電視機上有色差視頻輸入,您可以使 組合運用  
本機與  
電漿顯示器的  
Pioneer  
3
4
用這些端子代替標準視頻輸出來連接本系統至  
1
若有電漿顯示器 ,便可利SR+ 連接線 連接  
本機並善用各項便利功能,如透過電漿顯示器  
的遙控感應器控制本機、自動切換電漿顯示器  
的視頻輸入以及自動關漿顯示器的聲音  
等。  
您的電視機樣應該可以讓您透過三種視  
頻輸出提供最佳的畫質。  
使用色差視頻連接線連接  
COMPONENT  
至您電視機上的色差輸入組。  
VIDEO OUT  
媒體接收器  
CONTROL  
OUT  
色差輸入  
Pioneer電漿顯示器  
電視機  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
C
B/  
VIDEO  
P
B
FM  
UNBAL75  
C
B/  
AM LOOP  
VIDEO  
P
B
FM  
IN  
UNBAL75  
AM LOOP  
MCACC  
S-VIDEO  
Y
IN  
S-VIDEO  
Y
MCACC  
MIC  
VIDEO OUT  
HDMI OUT  
CONTROL  
VIDEO OUT  
MIC  
HDMI OUT  
CONTROL  
關於逐行掃描視頻  
相較隔行掃描視頻,逐行掃描視頻更能有效的  
加倍影像的掃描頻率,產生相當穩定,無跳動  
的影像。逐行掃描視頻僅可透過色差視頻輸出  
端子輸出。  
本機與逐行掃描及高傳真電視機之相容性  
本機與逐行掃描視Macro Vision System  
2
Copy Guard容。  
附註  
1 色差視頻輸出可在隔行掃描及逐行掃描格式之間作切換。請參閱 27視頻輸出設定值 說明。  
2 消費者應注意,並非所有的高傳真電視機均能與本產品完全相容,且可能導致畫面上出現人為造成的現象。對於 525行  
掃描畫面問題,建議使用者可將連接端子切換至 「標準解析度」輸隔行掃描)來得改善。如果發生電視機與本機在相  
容性方面的問題,請與本公司的客服中心聯繫。  
3 本系統與 2003 年之前生產的所有 Pioneer漿顯示器相容。  
4 Pioneer 公司3-ringed SR+ 連接料號 ADE7095您從市面上都可以買得到。有關取得 SR+接線的更多資訊,請  
Pioneer戶支援部門。  
32  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
其他接線  
可為與電漿顯示器所連接的輸入來源指定  
相對的輸入號碼。  
使用 以選取來(  
4
重要提示  
、 、  
DVD LN LINE  
ꢂ/ꢃ  
然後使用  
SR+接線接上的情況控器現在  
必須朝向電漿顯示器對非本機的遙控  
感應器,才能有效控制本系統 。  
以選取輸入號碼。  
ꢀ/ꢁ  
USB  
此項設置可使本機的輸入來源能符合電漿顯示  
2
器上相對編號的視頻輸入。 例若是線路設  
使用  
迷您插頭  
連接線來連接  
SR+  
插孔透過媒體接收器至您  
本機的  
3-ringed  
備的視頻輸出為連接至電漿顯示器上的視頻輸  
3,選LN PDP3 設定值TVTN 可將電漿  
顯示器切換至其內建選台器,NONE 則保留  
CONTROL IN  
1
電漿顯示器上的  
插孔。  
CONTROL OUT  
在您可以使用額外SR+ 功能之前,您需要先  
在本機上完成一些設置。請參閱下列 Pioneer  
電漿顯示器SR+中詳細說明。  
電漿顯示器原來的輸不作切換。  
5 完成時,請按下 ENTER。  
Pioneer  
SR+  
設置  
電漿顯示器的  
開啟  
模式  
SR+  
如果您使SR+接線Pioneer 電漿顯示器  
連接至本機上,請進行以下的設置。請注意,  
可以使用的視頻輸入數量會視連接的電漿顯示  
器而定。  
1 按下遙控器上的 SHIFT+SR+ 鍵。  
ꢂ/ꢃ SR+ ON  
,然後按下  
2
使用  
ENTER。  
要關SR+制,請選SR+ OFF。  
以選取  
按下遙控器上的  
鍵。  
1
SHIFT+SR+  
如果SR+能啟用時SR+連接線脫離或  
將電漿顯示器關閉,設定值會保持在  
2 使ꢂ/ꢃ 設定然後按下  
SR+  
ENTER  
設定。  
ON  
3 使ꢀ/ꢁ 以選取您要的設定值。  
VOL.C OFF -本機無法控制電漿顯示器的  
即使將本系統切成待機後又再切換回來,  
仍會保持 SR+定。 系統在開機時,自動  
靜音功能即會啟動。  
音量。  
VOL.C ON -當本機切換至可使用電漿顯  
示器的輸DVD,或以下當中其他的功  
則電漿顯示器上的音量會關閉,以便  
能聽到來自本系統所輸出的音效。  
附註  
CONTROL IN  
源尚未關閉,您便可一直使用電漿顯示器的遙控感應器 (即使在待機狀態下)。  
CONTROL OUT  
插孔時您是無法使用本機的遙控感應器只要電  
1本機的  
插孔連接至您電漿顯示器上的  
PDP5  
2
輸入在電漿顯示器上可能稱作 「PC 輸入」(或類似)。  
33  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
其他接線  
HDMI  
切換  
音頻設定值  
使用  
連接  
HDMI  
欲經HDMI結端子聆聽音確定已設好  
HDMI頻輸出設定值。  
若配HDMI DVI (結HDCP)的顯示器或顯  
示裝置,可利用一般市面上的 HDMI 連接線將它  
將系統切換成待機狀態。  
1
1
連接至本播放機,以提供高品質的數位視頻。  
2 SHIFT+SETUP 並使ꢂ/ꢃ 以選擇  
HDMI OUT然後按下 ENTER。  
欲了解更多關HDMI接的資參閱下列  
HDMI。  
3 使ꢀ/ꢁ 選擇想要的設定值,然後按下  
ENTER。  
AUDIO ON -音頻信號均透HDMI結端  
使用  
連接線將本播放機的  
HDMI  
HDMI  
連結端子連接至  
相容顯示器上的  
HDMI  
OUT  
HDMI  
連結端子。  
2
子輸出 。  
AUDIO OFF -關HDMI頻。  
重新設定 連結  
若出現錯誤訊顯示幕顯示  
HDMI  
HDMI接頭  
)或  
HDMI ERR  
若畫面一片空如在變更解析度後則請  
參閱44的疑難排解指仍無法解決問  
題,則請依下述步驟重新設HDMI結。  
HDMI相容顯示  
C
R/  
ANTENNA  
P
R
COMPONENT  
VIDEO  
FRONT  
R
R
LINE  
C
B/  
VIDEO  
FM  
L
P
B
M LOOP  
MCACC  
UNBAL75  
IN  
R
S-VIDEO  
Y
1 將系統切換成待機狀態。  
SURROUND  
VIDEO OUT  
AUDIO IN  
MIC  
HDMI OUT  
CONTROL  
S
2
SHIFT+SETUP  
ꢂ/ꢃ  
並使用 選擇  
按下  
連接線接頭的箭頭應朝上精確對準播放機  
的接頭 。  
HDMI INI然後按ENTER。  
系統會重新啟動HDMI設定值會自動重新設回  
原廠預設了解與這些設定值相關的更多  
資訊,請參閱27視頻輸出設定值。  
您也可以調整解析度及色彩HDMI。欲  
了解與這些設定值相關的更多資訊,請參閱  
視頻輸出設定值。  
27的  
附註  
1HDMI 連接方式僅適用於與 DVIHDCPHigh Bandwidth Digital Content Protection)相容DVI 型設備。若選擇連  
接至 DVI頭,則需使用另外的轉接頭 (DVIHDMI)完成連接。然而,DVI 連接方式並不支援音頻信號。欲了解更多相關  
資訊,請洽當地音響經銷商。  
機能與 HDMI (High Definition Multimedia Interface) 版1.1 相容。視連接的設備而定,使用 DVI 連接可能導致  
信號傳輸不穩。  
改變連接至 HDMI 輸出的設備,也必須變HDMI 設定值以符合新的設備 (請參閱27視頻輸出設定值 完成此項  
操作)。  
2 若已選AUTO 環繞聲模式,則在有些情況下不會自中置及環繞揚聲器聽到任何聲音。 此時,本公司建議請選AUDIO  
OFF  
34  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
其他接線  
HDMI  
HDMIHigh Definition Multimedia  
Interface)可支援以單一數位連接線連接DVD  
播放機、DTV、機上盒及其他影音設備,並同時  
提供視頻及音頻。HDMI研發是為了提供能將  
HDCPHigh Bandwidth Digital Content  
Protection)DVIDigital Visual  
Interface項技術合而為一的規HDCP是  
用來保護DVI 相容顯示器所傳輸及接收的數  
位內容。  
HDMI有能支援標強或高畫質視頻及多  
聲道環繞聲音效標準的能力。HDMI 的功能包  
括:未壓縮數位視頻、每秒可達 2.2 GB 頻寬  
(含 HDTV單一接頭(取代數條接線及  
接線以及能在影音來源及 DTV 等影音設備  
間進行通訊等。  
HDMI、HDMIHigh-Definition  
Multimedia Interface 均為 HDMI licensing  
LLC商標或註冊商標。  
35  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
第 章  
10  
其他資訊  
電視系統設置  
選項系統設定值  
不適用於台灣機種  
本系統的預設值為  
1
等候選單中所有可用的設定值均詳列如下 :  
每節中的附註說明,了解與設定值相關的  
更多資個部分的第一項設定值皆為預設。  
,除非您在播放部分  
AUTO  
碟片時注意到影像有失真現象,否則請將其設  
置為 。如果您發現在播放某些碟片時畫  
AUTO  
面出現失真的情形,請將電視系統設置成符合  
您所在國家或地區的系統。不過,這樣一來可  
能會限制您可以觀看的碟片種類。請參閱下列  
將系統切換成待機狀態。  
1
2 按下 SHIFT+SETUP 並使ꢂ/ꢃ 及  
ENTER 選擇想要調整的設定值。  
可使用的設定值如前面板顯示幕中所示。  
對照表,以了解各種碟片所適用的設定值  
3
2
,
)。  
NTSC  
AUTO PAL  
3 使用 ꢀ/進行調整,然後按下 ENTER 確  
認並退出。  
在使用  
以選擇  
(如上述之步  
TV SYS  
,將電視機系統變更  
ꢂ/ꢃ  
驟 )後,請按下  
2
成以下的設定值:  
ENTER  
系統展示設定值  
AUTO NTSC  
此設定值可停用或啟用自動展示功此項功  
能在您第一次插上電源時會啟動:  
NTSC PAL  
DEMO ON  
DEMO OFF  
PAL AUTO  
-可開啟展示功能。  
-可關閉展示功能。  
系統會自動開啟,同時您會在見到  
WELCOME  
4
後從顯示屏中看見新的電視系統設定值。  
頻率步距設置  
播放機設定值  
如果您發現您無法成功調選到電台,則表示頻  
率步距可能不適用您所在的國家/地區。  
NTSC PAL AUTO  
媒體類型  
系統  
格式  
NTSC  
PAL  
AM 9K  
DVD/ VCD/  
NTSC  
NTSC  
NTSC  
PAL  
PAL  
PAL  
NTSC  
PAL  
視頻  
VCD/DivX  
AM 10K  
CD/MP3/WMA/  
MPEG-4 AAC/  
NTSC或  
PAL  
JPEG/  
無光碟  
附註  
1 HDMI 功能的說明請參閱第 34使用 HDMI 連接。  
2 閒置五分鐘後,設定選單會自動退出。  
3 多數新型PAL 電視機系統可偵測 50 Hz (PAL)/60 Hz (NTSC),並可自動切換垂直振幅,以消除顯示畫面中的垂直收縮現  
不過有些情況是影像中呈現不出色如果您的 PAL TV有 V-Hold制功便會因為 NTSC 碟片中畫面搖晃而無法  
觀看。如果電視機有 V-Hold制功能,請動手調整直到畫面停止滾動為止。部分電視機上,畫面會有垂直收縮的現象,致  
使螢幕上下兩側留有黑色條邊。  
STANDBY/ON  
4 進行每項設定值變更之前,您必須先將本機切換成待機才行 (按下  
)。  
36  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
按下  
並使用 選取  
ꢂ/ꢃ  
1
SHIFT+SETUP  
DTS CD  
設定值  
如果您在播DTSCD,您會需要變更此  
然後按下  
DIMMER  
ENTER  
項設定值才能聽到解碼後的訊號。  
使用  
認並退出。  
進行調整,然後按下  
2
ꢀ/ꢁ  
ENTER  
NORMAL -一CD播放DTSCD  
在播放時會輸出雜訊。  
-較亮設定值  
LIGHT  
-較暗設定值  
DARK  
DTS-CD-進行DTS編碼CD的正確解般  
CD目的開頭可能會跳過。  
碟片/內容格式播放相容性  
按鍵鎖設置  
LOCK ON -可令前面板按鍵及控制無法操  
本機適合播放各種類媒體格式的碟。  
可播放的碟片一般在碟片及/或碟片包裝上會  
有下列其中一種標誌。然而請注意有些類型的  
碟片,像是可燒錄CDDVD,可能仍屬於不  
可播放的格式。  
作。  
LOCK OFF  
-可恢復前面板按鍵及控制的  
一般使用。  
更多資訊,請參閱下列 碟片相容性參照表。  
設置睡眠定時器  
睡眠定時可在您睡著約一小時後將系統關機,  
1
您完全無須擔心。  
DVD-Video  
DVD-R  
DVD-RW  
連續按  
以選取選項。  
選取下列選項:  
SLEEP  
-約在一小時後關機  
-取消睡眠定時  
SLP ON  
音頻CD  
VCD  
CD-R  
CD-RW  
SLP OFF  
在選SLP ON 後,您可以再按SLEEP 以確  
認一下剩餘的時每條線代表12鐘(剩  
餘時間:  
Fujicolor CD  
本機可播DVD+R/+RW片。  
S L P - - - - -  
Fuji Photo Film Co. Ltd.。  
DVD Format/Logo Licensing  
Corporation商標。  
調暗顯示幕亮度  
您可從兩項亮度設定值中選擇一項,設定前面  
本機亦與 KODAK Picture CD容。  
板顯示幕的亮度。  
附註  
1示幕在睡眠定時設置好時會變暗。  
37  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
本播放機可支援能產生優異畫聲道IEC  
的超VCD準,並可支援寬屏幕畫面。  
媒體  
相容格式  
音頻壓縮  
‧ MPEG-1 Audio Layer 3 (MP3)、  
Windows Media Audio (WMA)MPEG-4  
AAC  
VIDEO  
CD  
樣頻率:32 kHz / 44.1 kHz /  
48 kHz  
元率:任何傳輸率 (建議採用  
128 kbps上)  
Super Video CD (VCD)  
VBR可變位元率)MP3/WMA/MPEG-  
4 AAC放:否  
DualDisc 的播放  
DualDisc一種全新、雙面的碟片,一面可容  
納 DVD式的影像、聲音等,另一面則可容納  
DVD式的內容,如數位音頻媒體內容。  
WMA失真編碼:否  
DRM數位版權管理容性容  
(受 DRM 保護之音樂檔案將無法在本  
機上播放。  
檔名:.mp3、.wma、.m4a需使  
用這些副檔名以利播放機辨識 MP3/  
WMA/MPEG-4 AAC案)  
而此種碟片容納非 DVD 音頻的一面因不符 CD-  
Audio規格,故可能會無法播放。  
‧ 檔案結可能有所不同一張  
碟片上最多可儲299 個資料夾;每  
個資料夾中最多可存648 資料夾及  
合併後)  
DualDisc 的 DVD 面可在本產品中播放。DVD-  
Audio容不能播放。  
DualDisc格的更多詳盡資請洽詢碟  
片製造商或碟片零售商。  
檔案  
JPEG  
Baseline JPEGEXIF 2.2* 靜態  
影像檔案可3072 x 2048析度畫  
素。  
*數位相機專用之檔案格式  
行掃JPEG容性:否  
檔名:.jpg必須使用這些副檔  
名,以利本機辨JPEG案)  
案結可能會有所變動一  
張碟片上最多可儲299資料夾;  
每個資料夾中最多可存648料夾  
及檔合併後)  
碟片相容性參照表  
媒體  
相容格式  
CD-R/RW  
‧ CD-Audio、VCD/VCD、ISO  
9660 CD-ROM*  
* 符合 ISO 9660 Level 1 或 2 之標  
準。CD體格式:Mode1、Mode2 XA  
Form1。與 RomeoJoliet種檔案  
系統相容。  
‧ 多區段播放:否  
‧ 未最終化碟片播放:否  
DVD+R/DVD+RW  
關於  
相容性  
僅有視頻模DVD-Video 模式錄製  
並已完成封片DVD+RDVD+RW 方可播。然  
而,有些在錄影期間所完成的編輯內容可能會  
無法精確地播放。  
DVD-R/RW  
‧ DVD-Video(視頻模式視頻錄影  
(VR)*、UDF Bridge DVD-ROM  
* 編輯點可能無法完全按照編輯的方  
式播放;播放到編輯點時畫面可能會  
有短暫空白的情形。  
‧ 多重邊界播放:否  
‧ 未最終化播放:否  
電腦製作碟片  
‧ 使用電腦錄製的碟片可能會因為用  
以製作碟片的軟體本身的設置而無法  
播放。此時,請檢DVD-R/RW或  
CD-R/RW體手冊或碟片包裝上更多  
關於相容性的說明。  
‧ 以封包燒錄方式錄碟片不相  
容。  
38  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
2Albanian(爾巴尼亞) (sq), Croatian  
(羅埃西亞) (hr), Czech() (cs),  
Hungarian(牙利) (hu), Polish() (pl),  
Romanian(馬尼亞) (ro), Slovak(洛伐克)  
(sk), Slovenian(洛維尼亞) (sl)  
關於  
DivX  
®
DivX由來DivX, Inc.DivX 視頻編碼  
技術所建立的一種壓縮數位視頻格式。本機可  
播放燒錄CD-R/RWDVD-R/RW/ROM片上的  
DivX頻檔DVD-Video同的術,  
獨特的 DivX 視頻檔案均稱錄  
前,CD-R/RWDVD-R/RW片上的檔案/  
標題命名時,請記住它們基本上將會按字母的  
順序播放。  
3Bulgarian(加利亞) (bg),  
Byelorussian(俄羅斯) (be), Macedonian(馬其頓  
)(mk), Russian()(ru), Serbian(爾維亞)  
(sr), Ukrainian(克蘭) (uk)  
4
群組 Hebrew(伯來) (iw), Yiddish  
(第緒) (ji)  
群組 Turkish(耳其) (tr)  
5
DivX、DivX Certified及相關標誌均是  
DivX, Inc.商標,並獲授權使用。  
DivX  
視頻相容性  
®
DivX Certified品。  
®
MPEG-4 AAC  
DivX 媒體檔案的標準播放方放  
®
®
AACAdvanced Audio Coding)MPEG-4 AAC  
標準的核心技術,主要結MPEG-2 AAC,是構  
MPEG-4頻壓縮技術的基礎使用的檔案  
格式及副檔名需視用以進行 AAC 檔案編碼的應  
所有版本的 DivX 影像內含 DivX  
1
6。  
副檔.avi.divx必須使用這些副檔  
名,以利本機辨識 DivX 視頻檔案請注  
意,所有採.avi檔名的檔案均會辨識  
成MPEG4所有這些檔案並非一定DivX  
視頻檔亦因此不見得能在本機上播放。  
®
用程式而定。本機可播放由 iTunes 所編碼,  
.m4a  
副檔名「  
AACDRM保護的  
®
檔案不能播放,以及由某iTunes 版本所編  
碼的檔案也可能無法播放,或檔名可能無法正  
確顯示。  
顯示  
字幕檔案  
DivX  
以下所列為 DivX 外部字幕檔案所適用的字型  
AppleiTunesApple Computer, Inc.美國及  
其他國家註冊的商標。  
2
組。可以藉由設定能符合字幕檔案 的字幕語  
(在28 頁的 語言設定值於螢幕上見  
關於  
WMA  
到正確的字型組合。  
群組 : Albanian(爾巴尼亞語 ) (sq), Basque  
1
(克語 ) (eu), Catalan(泰羅尼亞語 ) (ca),  
Danish() (da), Dutch() (nl), English  
(語 ) (en), Faroese() (fo), Finnish  
(語 ) (fi), French() (fr), German( 德)  
(de), Icelandic() (is), Irish(爾蘭)  
(ga), Italian(大利) (it), Norwegian ()  
(no), Portuguese(萄牙) (pt), Rhaeto-Romanic  
(羅曼斯語 ) (rm), Scottish(格蘭) (gd),  
Spanish(西班牙) (es), Swedish() (sv)  
®
包裝盒所印製之Windows Media 圖標為指本機  
可以播Windows Media Audio 的內容。  
附註  
1法播放容量大於 4 GB.avi頻檔案。  
2外部字幕檔案部分,本機可支援以下的字幕格式檔案名稱 (請注意,這些檔案不會在碟片導向選單中顯示):.srt、  
.sub、.ssa、.smi。  
些外部字幕檔案可能無法正確顯示或完全無法顯示。  
片檔案的檔名必須重複出現在外部字幕檔案檔名的開頭處。  
一影片檔案能夠切換的外部字幕檔案數量,最多限定為 10。  
39  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
WMA 是 Windows Media Audio 寫,且為  
Microsoft Corporation 所研發出來的音頻壓  
碟片應避免事項  
碟片係以高速在本機內旋轉。如果碟片發生爆  
裂、碎裂、扭曲或其他損壞情形,請勿冒險置  
於本機中播放-最終您可能會使本機損壞。  
®
縮技術。WMA容可應Windows Media  
®
Player version 7/7.1,Windows Media  
®
®
Player for Windows XPWindows Media  
本機在設計上為僅可使用傳統、全圓的碟片。  
Pioneer 聲明:對於因使用變形的碟片所引起  
的所有責任,概不負責。  
Player 9 Series軟體進行編碼。  
MicrosoftWindowsMediaWindows圖標為Microsoft  
Corporation 使或  
註冊商標。  
DVD Video  
適用地區  
所有的 DVD Video 碟片上均有印上地區標示,  
以指出該碟片於全球適用的地區。您DVD 系  
統亦有一地區標就在背面板上來自不  
相容地區的碟片將無法在本機上播放。在此情  
況下,螢幕上會出現下列訊息:  
碟片的使用及維護  
手拿碟片時  
拿取碟片時,請握住其邊緣以免在碟片任何一  
面留下指紋、灰塵或刮痕。已經損壞或髒污的  
碟片會影響播放的效能。  
非兼容碟片區域碼  
無法播放碟片  
如果碟片上留有指紋、灰塵等不潔物,請使用  
柔軟、乾燥的布料擦拭乾淨。  
ALL 的碟片可在任何的播放機上播放。  
安裝及保養  
安裝提示  
請直向輕輕由碟片中央向外擦拭。請勿以畫圓  
的方式擦拭碟片的表面。  
本公司希望您未來幾年內都能盡情的享用本系  
統,因此在選擇安裝部位時,敬請牢記以下各  
點:  
如有必要,請用拭布沾上酒精,或市面所購買  
CD/DVD潔工具來更徹底清潔碟不使  
用揮發劑、稀釋劑或其他設計用來清潔黑膠唱  
片的清潔劑。  
...  
在通風良好的室內使用。  
置於平坦、水平的表面,像書桌、擱架或音響架  
上。  
儲放碟片時  
切勿  
...  
避免將碟片留在太冷、太濕或太包括受到  
陽光直射)的環境中。不要將紙張或貼紙黏在  
碟片上,或用鉛筆、鋼珠筆或其他尖銳的書寫  
用具在上面書寫。這樣會損壞碟片。  
在高溫或極濕的地點使用,包括暖爐或其他會產  
生高熱的設備附近。  
置於窗檯或其他會使系統受到陽光直射的地點。  
在多灰或極濕的環境中使用。  
直接擺在擴大機或音響系統裡使用時會逐漸變  
熱的其他元件上。  
40  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
在電視機或顯示器附近使用,因為有可能會產生  
干擾-特別是如果電視機有使用室內天線時。  
在廚房或其他會使系統暴露在濃煙或蒸氣之中  
的地點。  
畫面大小及碟片格式  
DVD-Video 碟片能收錄各種的畫面比例,範例  
從一般為 4:3 的電視節目到畫面比例高達 7:3  
2
在厚毛毯或地毯上使用,或覆蓋布料-這樣可能  
會妨礙系統主機的正確散熱效果。  
置於不平穩的表面,或面積不足以支撐系統主機  
四腳的表面上。  
CinemaScope螢幕電影 都可以。  
電視機也有各種不同的畫面比標準」  
3
4:3及寬屏16:9。  
清潔讀寫頭時  
DVD放機的讀寫頭一般使用是不會弄髒但  
如因某些原因積灰或髒污時,請洽詢您所在地  
Pioneer 授權服務中心。雖然讀取頭清潔劑  
一般市面上都可買得到,但本公司不建議使用  
以免可能造成讀取頭損壞。  
設置4:3 (Letter Box),寬螢幕  
碟片在顯示畫面時,上下都會出現黑  
色條邊。  
設置4:3 (Pan&Scan) 時,寬螢幕  
碟片在顯示畫面時,左右邊會有截短  
的情形。雖然畫面看起來大些,但您  
看到的不是實際的整個畫面。  
水氣凝結問題  
如果將本機由溫暖的室內搬到室外,或室內溫  
度遽然上升時,內部便可能會有水氣凝結。雖  
然凝結的水氣不會對本機造成損壞,但可能會  
使效能短時間內受到影響。請讓其有一小時的  
時間恢復至較暖熱的溫度,再行開機。  
搬動系統主機  
如果必要移動到主機,且播放機內有碟片,  
請先將其取出,然後按下前面板上的  
STANDBY/ON  
將系的  
1
GOOD BYE  
字樣消失後,再將電源插頭拔下。  
絕不可在播放期間將主機舉起或搬動-可能會使  
高速旋轉下的碟片損壞。  
附註  
GOOD BYE  
1在  
2多寬螢幕碟片都會無視系統的設定值,因此不管設定值為何,碟片都會以 letterbox 的格式顯示。  
3果在標4:3 的電視機上採用 的設定值,或寬螢幕電視機採用任何一種 設定值,便會導致畫面失真。  
字樣自螢幕上消失前便將主機插頭拔掉,可能會使系統恢復成原廠的設置。  
16:9 (Wide)  
4:3  
您觀賞4:3 格式所錄製的碟片,您可以使用電視控制功能來選擇影像呈現的方式。您的電視機可能會不同的縮放及  
伸展功能;細節部分請參閱您電視機所附的使用手冊。  
些電影的畫面比例會較 16:9,因此即使是使用寬螢幕電視機,這些碟片仍然會以 「letterbox」的樣式播放。  
41  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
故障排除  
人們經常錯將不正確之操作當成系統故障或異常。如果您認為本機有那裡不對勁,請按以下各點  
進行檢查。有時問題可能是來自其他裝置。請仔細檢查其他使用中的裝置和電器設備。如果在查  
證過以下各點後問題還是無法改善,請就近洽詢您Pioneer權服務中心或經銷商,前來代為  
維修。  
如果本系統是因為受到靜電等外來效應致使無法正常操作,請將電源插頭從輸出插座上拔下  
再插回去,以回復正常的操作狀態。  
一般問題  
問題  
解決辦法  
電源沒有打開,或突然 開機前請等待一分鐘。  
啟動時可能會 定主機上的線束無鬆脫的情形。如有鬆脫,可能會造成系統自動關機。  
有一錯誤訊息顯示查揚聲器連接是否正確。  
定主電源的電壓確實適用於本型機種。  
試降低音量。  
果問題仍然存在,請將本機攜至最近的 Pioneer 授權服務中心或您的經  
銷商處接受維修。  
選擇功能後,沒有聲音 果您正使用外部輸入,請確定設備連接是否正確 (請參閱31連  
接輔助音頻設。  
輸出。  
下遙控器上的  
以關閉靜音功能。  
MUTE  
沒有聲音來自環繞聲或 25頁的 「聲道位準」設定值 以檢查揚聲器位準。  
中置揚聲器。  
選取  
TUNER  
認未選取  
時,僅能以立體聲聽取來源。  
AUTO STEREO  
模式 (參閱14用心聆  
VIRTUAL  
聽您的系。  
確地將揚聲器接上 (請參安裝指南。  
來源是 96 kHz,則會以立體聲播放。  
無法操作遙控器。  
換電池 (請參安裝指南)。  
7 尺內的範圍,30的角度對準遙控感應器操作 (請參安  
裝指南。  
除障礙物或從其他位置操作。  
免前面板上的遙控感應器受到陽光直射。  
認未將任何物品插入 CONTROL IN 插孔。  
系統為用一 SR+接線連接至電漿顯示器,則請確認電漿顯示器已開  
機。將遙控器對準電漿顯示器以便能操作系統。  
TRAYLOCK  
中顯示,同時碟盤無法  
退出。  
(退出)鍵不放8 鐘。接著碟盤便可使用 (退  
在顯示屏 住前面板上的  
出)鍵來開啟或關閉。  
SND.  
螢幕中出現  
住前面板上的 (停止)鍵不放約 5鐘。碟盤會自動退出,表示  
的字樣,同時 「音效展示」模式已取消。  
本機無法接受控制。  
DEMO  
42  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
播放機  
DVD/CD/VCD  
問題  
解決辦法  
碟片在置入後又自動退 潔碟片並將碟片正確對準碟片導槽。  
出。  
DVD-video片上的地區代碼與本機上的代碼不相符,該碟片便不能  
使請參閱40DVD Video 適用地區在此情況下,螢幕上會出  
現下列訊息:非兼容碟片區域碼無法播放碟片。  
播放機內部的水氣有時間蒸發。避免在空調設備附近使用本機。  
無法進行播放。  
果碟片在置入時放反,請重新將碟片標籤面朝上放入。  
影像播放中止,且按鍵 (停止)按鍵,然後按下 (播放)按鍵開始播放。  
無法使用。  
將電源關閉,然後再使用前面板上的 STANDBY/ON 按鍵將電源打  
開。  
設定值全部消除。  
沒有影像/沒有色彩。 查連線是否正確以及插頭是否完全插入。  
閱電視機/顯示器的使用手冊,以確定設定值是否正確。  
電源發生中斷,設定值即會被消除。  
是選取逐行掃描設定值卻已用色差視頻連接線來連接循序掃描信號不相  
容的電視機,將完全無法看到任何畫面。使用合成或 S-video子接上電視  
機後,請將色差視頻輸出設定值變更隔行掃(請參閱27視頻輸  
出設定值。  
螢幕畫面拉長或比例沒 電視機屏幕的設定值不正確。重新設置電視機屏幕的選項以與您使用的電  
變。  
視機/顯示器相請參閱27 頁的 視頻輸出設定值。  
VCR或透AV 系統為採用防拷技術,以避免透過 VCRAV擇器發生錄製或影像方  
選擇器進行錄製,便會 面的問題。這並不是故障。  
干擾到影像的播放。  
畫面在播放期間受到干 播放機Macro-Vision System 防拷系統相容。有些碟片內含防拷訊  
擾或呈現一片漆黑。  
號,而且此種碟片在播放時,在畫面上一些地方會出現如線條等的雜訊 (視  
使用的電視機型式而定這並不是故障。  
片對特別的播放機功能反應不同。這可能會導致畫面在功能執行當時,  
短時間呈現漆黑或輕微晃動的現象。這些問題便因為碟片與碟片內容之間的  
差異而更加突顯,但並不是本機故障所致。  
DVDCD量有明顯 DVDCD使用的錄製方式不同。這並不是故障。  
差異。  
CD-ROM碟無法辨識CD-ROM使ISO 9660碟片格式錄製。更多關於碟片相容性的資  
訊,請參閱38碟片相容性參照。  
DVD-ROM片無法辨  
識。  
DVD-ROMUDF bridge 格式錄製。更多關於碟片相容性的資訊,  
請參閱38碟片相容性參照。  
檔案無法在碟片導向/ 片上的檔案必須以正確的副檔名命名:譬如,MP3 檔案採.mp3,WMA  
相片瀏覽器當中顯示。 檔案採.wma,MPEG-4 AAC案採用 .m4a,JPEG.jpg大寫或小寫  
都可以請參閱38碟片相容性參照表 說明。  
無法播WMA或  
MPEG-4 AAC案。  
些檔案為採DRM數位版權管理)所錄製的。這並不是故障。  
43  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
調諧器  
問題  
解決辦法  
收聽電台廣播時有明顯 接上 AM請參「安裝指南)並加以調整方向及位置,以得到  
的雜音。  
最佳的接收條件。您也可以另外接一條內部或外部 AM請參閱31頁  
連接外部天。  
全伸展開 FM型天線,調整最佳接收的位置,然後固定於牆上。您也  
可以另外接一組外部 FM請參閱31連接外部天線。  
閉其他可能造成雜訊的設備或將其移走。  
調諧間距不適用您所在的國家或地區。請參36頻率步距設置  
的說明以切換調諧間隔。  
自動調諧功能無法接收 台訊號微弱。自動調諧功能僅能偵測到訊號發射良好的無線電台。想要  
到某些電台。  
獲得更加靈敏的調諧條件,可接上一組室外天線。  
USB 連接  
問題  
解決辦法  
本系統無法辨識 USB大‧定已將 USB頭完全插入本機內。  
認記憶體格式為 FAT16FAT32。  
建有 USB線器USB置不支援。  
量儲存裝置。  
檔案無法在導覽器/相 案必須要有正確的副檔名:譬如,MP3 檔案採用 .mp3,WMA案採用  
片瀏覽器中顯示。  
.wma,MPEG-4 AAC案採.m4a,JPEG用 .jpg大寫或小寫都可以。  
定檔案許可權未受限制 (透過密碼等。  
無法播放 WMA或  
MPEG-4 AAC 檔案。  
些檔案為採用 DRM數位版權管理)所錄製的。這並不是故障。  
HDMI 連接  
問題  
解決辦法  
HDMI頻輸出。  
HDMI頻輸出。  
34HDMI頻設定值 確定已選取  
AUDIO ON  
定在針對使用設備的設定中,已選取本播放機作為 HDMI請參閱  
設備的使用手冊。  
HDMI 連接線已正確接上且未損壞。  
認使用 HDMI面接上的設備已開啟且HDMI 相容這些設備須與  
DVIHDCPHigh Bandwidth Digital Content Protection)相容。)  
機能與 HDMI (High Definition Multimedia Interface) 版1.1相  
容。視連接的設備而定,使用 DVI接可能導致信號傳輸不穩。  
定本機上的解析度與使用 HDMI上的設備一致。請參27視  
頻輸出設定值 變更解析度。  
變更解析度後畫面一片空白,則表示選取的解析度與您的顯示器不符。  
請參閱第 34重新設HDMI重新設回原廠預設值。  
44  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
問題  
解決辦法  
在變HDMI 色彩設定 連接的設備而定,有HDMI 色彩設定值可能造成畫面無法正確顯示。  
值後,顯示器的色彩出 此時,請視狀況使用電視機的視頻輸入設定值選取 RGB。或者可恢復先前的  
現問27HDMI 色彩設定值。  
錯誤訊息  
訊息  
說明  
2CH ONLY  
96K  
作僅適用於雙聲道來源,因目前來源為多聲道來源而無法進行。  
作因來源96 kHz位而受到禁止。  
SND. DEMO  
效展示功能啟動。請參閱在第 42故障排除 一般問題 內容說  
明。  
NOISY  
背景雜音太高而無法順利完成 MCACC定。  
ERR MIC  
ERR SP  
‧在MCACC定期間,因未將麥克風接上或連接不正確而發生錯誤。  
‧在MCACC定期間,因未將揚聲器接上或連接不正確而發生錯誤。  
MUTING  
於音效被靜音,因此使用操作受到限制 (請按下  
作因選取選台器而無法進行。  
)。  
MUTE  
STEREO  
TRAYLOCK  
KEY LOCK  
PHONESIN  
USB ERR  
盤鎖啟動。請參閱在42故障排除 一般問題 內容說明。  
鍵鎖啟用。請參閱37按鍵鎖設置 說明。  
作因耳機插上而無法進行。  
多與此相關的資23使USB重要提示 乙節  
說明。  
HDMI ERR  
參閱上述 HDMI的疑難排解提示。若仍有問題,則請參閱第 34 頁  
重新設HDMI。  
EEP ERR  
EXIT  
修事宜請洽詢您Pioneer權服務中心或您的經銷商。  
訊息會在選單閒置一段時間後自動退出時出現。  
45  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
重新設置系統  
請使用前面板控制將系統設定值重新設回原廠  
使用語言代碼清單  
有些語言選參閱28語言設定值)  
能讓您從下列 語言代碼清單 136語言當  
中設定個人喜好的語言。  
預設值。  
配合系統開機按下 STANDBY/ON 並按住  
1
2
其他語言。  
USB。  
下次在您開機時,所有系統設定值都將會被重  
ꢂ/ꢃ  
使用  
以選擇字母代碼或是數字代  
置。  
碼。  
3
ꢀ/ꢁ  
以選擇字母代碼或是數字代碼。  
使用  
請參閱 語言代碼清單(下一頁列有完整語  
言種類及代碼的清單。  
46  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
語言代碼清單  
語言字母代碼語言代碼  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
German (de), 0405  
Italian (it), 0920  
Spanish (es), 0519  
Dutch (nl), 1412  
Russian (ru), 1821  
Chinese (zh), 2608  
Korean (ko), 1115  
Greek (el), 0512  
Estonian (et), 0520  
Lingala (ln), 1214  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swedish (sv), 1922  
Swahili (sw), 1923  
Tamil (ta), 2001  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Kirghiz (ky), 1125  
Latin (la), 1201  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
Panjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Portuguese (pt), 1620  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813 Ukrainian (uk), 2111  
Kirundi (rn), 1814  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Twi (tw), 2023  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Welsh (cy), 0325  
Danish (da), 0401  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Sinhalese (si), 1909  
國家/地區代碼清單  
國家/地區、國家/地區代碼、國家/地區字母代碼  
阿根, 0118, ar  
, 0121, au  
奧地, 0120, at  
比利, 0205, be  
, 0811, hk  
, 0914, in  
, 0904, id  
義大, 0920, it  
菲律, 1608, ph  
葡萄, 1620, pt  
俄羅斯聯邦), 1821, ru  
新加, 1907, sg  
0218, br  
0301, ca  
0312, cl  
1016, jp  
1118, kr  
0519, es  
西班,  
西,  
加拿,  
,  
,  
0308, ch  
1905, se  
2023, tw  
2008, th  
0702, gb  
2119, us  
,  
,  
,  
,  
,  
,  
1325, my  
1324, mx  
,  
,  
,  
,  
,  
,  
馬來西,  
墨西,  
0314, cn  
0411, dk  
0609, fi  
0618, fr  
0405, de  
1412, nl  
,  
紐西,  
,  
1426, nz  
1415, no  
巴基斯,  
1611, pk  
47  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
S-DV1T 揚聲器系統  
規格  
前置/環繞揚聲器  
有效功率輸出:  
前置、中置、環繞聲 . . . 每個聲100 W  
(1 kHz,10 % T.H.D.,4 )  
擴大器部分  
外箱 . . . . . . . . 封閉式落地防磁)  
系統 . . . . . . . . . . . . . 2-way統  
揚聲器:  
低音 . . . . . . . .7.7分圓錐體型 x2  
高音器 . . . . . . . . . 2.6分半圓型  
重低音  
額定阻抗 . . . . . . . . . . . . . . 4  
. . 100 W (100 Hz,10 % T.H.D.,4 )  
頻率範圍 . . . . . . . . . 70 Hz20 kHz  
最大輸入功率 . . . . . . . . . . . 100 W  
尺寸  
. . . .260寬)x 1096.5釐 (高)x 260釐 (深)  
重量 . . . . . . . . . . . . . . 4.2斤  
碟片部分  
數位音頻特性 . . . DVD fs:96 kHz, 24-bit  
類型 . . . . . . . DVD統,VCD/VCD  
系統及光碟數位音響系統  
頻率響應  
中置揚聲器  
. . . 4 Hz44 kHz96 kHz樣率)/  
4 Hz22 kHz48 kHz樣率)  
抖動率 . . . . . . . . . . . . . 測量限制  
(± 0.001 % W.PEAK)以(JEITA)  
外箱 . . . . . . . . 封閉式書架防磁)  
系統 . . . . . . . . . 7.7分 1-way統  
揚聲器 . . . . . . . . . 7.7分圓錐體型  
額定阻抗 . . . . . . . . . . . . . . 4  
調諧器部分  
FM  
頻率範圍 . . . . . . . 87.5 MHz108 MHz  
天線 . . . . . . . . . . .75 ,不平衡式  
頻率範圍 . . . . . . . . . 75 Hz20 kHz  
最大輸入功率 . . . . . . . . . . . 100 W  
尺寸  
. . . . 270釐 (寬)x 96釐 (高)x 90釐 (深)  
重量 . . . . . . . . . . . . . .0.78斤  
調諧器部分  
頻率範圍:  
AM  
配件  
9 kHz距 . . . 531 kHz1602 kHz  
10 kHz. . . 530 kHz1700 kHz  
天線 . . . . . . . . . . . . . . 環型天線  
揚聲器連接線 . . . . . . . . . . . . . 5  
小型防滑墊 . . . . . . . . . . . . . . 4  
大型防滑墊 . . . . . . . . . . . . . . 16  
揚聲器基座 . . . . . . . . . . . . . . 4  
底座用) . . . . . . . . . . . . 12  
電源需求:  
其他  
台灣機種 . . . AC 110 V,50 Hz60 Hz  
其他機種  
揚聲器系統  
S-DV1SW  
. . . AC 220 V240 V, 50 Hz60 Hz  
消耗功率 . . . . . . . . . . . . . . 55 W  
待機消耗功率 . . . . . . . . . . . 0.29 W  
尺寸  
. . . 420釐 (寬)x 60釐 (高)x 330釐 (深)  
重量 . . . . . . . . . . . . . . 3.3 公斤  
重低音設定(  
SW  
外箱 . . . . . . . . . . . 低音反射落地型  
系統 . . . . . . . . . 16分 1-way統  
揚聲器 . . . . . . . . . .16分圓錐體型  
額定阻抗 . . . . . . . . . . . . . . 4  
頻率範圍 . . . . . . . . 30 Hz2.5 kHz  
最大輸入功率 . . . . . . . . . . . 100 W  
尺寸  
. . . 220釐 (寬)x 421釐 (高)x 402釐 (深)  
重量 . . . . . . . . . . . . . . 6.0斤  
配件 (DVD/CD 接收器)  
遙控器 . . . . . . . . . . . . . . . . 1  
2R6 乾電池  
(用以確認系統操作). . . . . . . . . 2  
視頻連接線 (黃色插頭) . . . . . . . . 1  
AM型天線 . . . . . . . . . . . . . . 1  
FM線 . . . . . . . . . . . . . . . . 1  
麥克用於 Auto MCACC置). . . . . 1  
電源線 . . . . . . . . . . . . . . . . 1  
安裝指南  
配件  
揚聲器連接線 . . . . . . . . . . . . . 1  
大型防滑墊 . . . . . . . . . . . . . . 6  
本操作手冊  
48  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
其他資訊  
附註  
為求產品改格及設計如有變更不  
另行通知。  
本產品經NEC公司授權,使用FontAvenue®  
字體。FontAvenue為NEC公司的註冊商標。  
本產品所使用的版權保護技術受美國專利以及  
其他屬於 MACROVISION CORPORATION 的知識  
產權保護。使用該版權保護技術必須取得  
MACROVISION CORPORATION 的同意,如果不經  
MACROVISION CORPORATION 的同意,則只能用  
於家庭或有限範圍的觀賞。反向還原或解密等  
亦屬於禁止之列。  
DRM(數位版權管理)是一種藉由限制  
壓縮音頻檔案僅能在電腦以外錄製此  
種檔案專用的裝置(或其他錄製設備)  
播放,專為有效預防非法拷貝而設計  
的防拷技術。相關詳細資訊,請參閱  
個人電腦及/或軟體所附的使用手冊  
或說明檔案。  
Dolby Laboratories 授權製造杜比、  
「DolbyPro Logic」與DDolby  
Laboratories商標。  
“DTS”和“DTS Digital Surround”為數碼影  
院系統公司(Digital Theater Systems, Inc.)  
的註冊商標。  
49  
ChH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIONEER CORPORATION  
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270  
<06C000001>  
Printed in  
<ARE7627-A>  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument Amplifier Pro 212s User Manual
Pelco Security Camera c2485m a ml User Manual
Pentair Swimming Pool Quasar User Manual
Philips Computer Hardware ADM0101 User Manual
Philips Portable DVD Player PET940 05 User Manual
Pioneer Speaker System PDP S63 User Manual
Planet Technology Switch WGS3 24000 User Manual
Polk Audio Speaker SR104DVC User Manual
Poulan Lawn Mower 177271 User Manual
PS Audio Stereo Amplifier GCC 250 User Manual