Before You Start
Before You Start
Precautions
After-sales service for
Pioneer products
About the XM Logo
Important (Serial Number)
Operation Manual
XM digital satellite data & audio receiver
GEX-P10XMT
The serial number of this device is located on
the bottom of this unit. For your own security
and convenience, be sure to record this num-
ber on the enclosed warranty card.
Please contact the dealer or distributor from
where you purchased the product for its
after-sales service (including warranty condi-
tions) or any other information. In case the
necessary information is not available,
please contact the companies listed below:
Please do not ship your product to the com-
panies at the addresses listed below for
repair without making advance contact.
Information to User
Alteration or modifications carried out
without appropriate authorization may
invalidate the user’s right to operate the
equipment.
The “XM” mark on this unit indicates that it is
an XM satellite radio receiver. You can receive
XM satellite radio broadcasts by connecting
the unit as shown in the installation manual.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and
operation. All the functions have been
designed for the easiest possible use, but
many are not self-explanatory. This operation
manual will help you benefit fully from this
unit’s potential and maximize your listening
enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by
reading through the manual before you begin
using this unit. It is especially important that
you read and observe Precautions,
WARNINGs and CAUTIONs in this man-
ual.
U.S.A.
About this unit
Note
Pioneer Electronics (USA), Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
The XM name and related logos are trademarks
of XM Satellite Radio Inc.
• Handling the cord on this product or
cords associated with accessories sold
with the product may expose you to chem-
icals listed on proposition 65 known to the
State of California and other governmen-
tal entities to cause cancer and birth
defects or other reproductive harm. Wash
hands after handling.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
For warranty information, please see the
Limited Warranty sheet included with your
product.
Introducing XM Satellite
Radio
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
There’s a world beyond AM and FM. XM
Satellite Radio. Up to 130 channels. Coast-to-
coast coverage. Digital quality sound. With
many commercial-free music channels. Plus
the best sports, comedy, talk, news and
dio.com. The future is waiting.
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
Product registration
Visit us at the following site:
• Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Smoke, overheating, or permanent dam-
age could result from contact with liquids.
• Keep this manual handy as a reference for
operating procedures and precautions.
• Never set the volume of your product so
high that you cannot hear outside traffic
and emergency vehicles.
• Protect this product from moisture.
• If the battery is disconnected or has dis-
charged, any previously set memory will
be erased and must be reprogrammed.
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
Notes
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: 1-877-283-5901
•
•
XM Radio is responsible for the channel
lineup and categories, and may change at
any time. Please contact XM Radio for the
latest channel lineup and category informa-
tion.
1
Register your product. We will keep the
details of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
Receive updates on the latest products
and technologies.
Download owner’s manuals, order prod-
uct catalogues, research new products,
and much more.
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL:55-9178-4270
2
3
To activate the XM tuner, you must have an
XM subscription.
Published by Pioneer Corporation.
Copyright © 2004 by Pioneer Corporation.
All rights reserved.
Printed in Thailand
<KKYZX> <04L00000>
En
En
<CRB2045-A/N> UC
Download from Www.Somanuals.com. All Manuals Search And Download.
XM tuner
XM tuner
XM tuner
XM tuner
1
2
Press SOURCE to select a XM source.
Press BAND to select a band.
Power supply for this unit
The method for turning this unit’s power
supply ON/OFF differs according to other
units you combine with it.
Selecting the XM source
Listening to XM
Storing and recalling chan-
nels
Switching the XM display
Introduction of advanced
tuner operation
Switching the channel
select mode
When selecting a channel, you can switch
between selecting a channel by channel
number or by channel category.
Initially, channel number select mode is
selected.
XM channels each have a channel number
and channel name. XM programing also
carries the song or program title, the artist
name and category when available.
1
Press SOURCE to turn the head unit
If you press any of the preset tuning buttons
1–6 you can easily store up to six channels
for later recall with the touch of a button.
• Memory and recall are for broadcasts. If
you recall a memorized broadcast that
has been moved to another channel, the
channel to which the broadcast was
moved is selected.
Press BAND until the desired band is dis-
played, XM1, XM2 or XM3.
on.
2
Press SOURCE to select “XM” source.
3
Press ꢂ or ꢃ to select the desired
When combining this unit with
either AVIC-D1, AVIC-N1, or AVIC-
N2:
• This unit’s power supply can be turned
OFF only if the ignition switch is turned
OFF.If for any reason you want to switch
the power of the unit OFF, switch the vehi-
cle’s ignition off (turn the ACC of your
vehicle to OFF).
Press SOURCE repeatedly to switch between
the following sources:
XM tuner—Tuner—Television—DVD
player/Multi-DVD player—Built-in CD
player—Multi-CD player—External
unit 1—External unit 2—AUX
ꢀ
Press DISPLAY.
channel.
Press DISPLAY repeatedly to switch between
the following settings:
Channel name—Artist name/feature—
Song/program title—Channel category
The channel number moves up or down suc-
cessively.
Channels that cannot currently be selected
are skipped, and the next channel is
selected.
1
Press FUNCTION to select MODE.
Press FUNCTION until MODE appears in the
display.
ꢀ
When you find a channel that you
ꢀ Function display
Shows the function status.
want to store in memory, press one of the
preset tuning buttons 1–6 and hold until
the preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected channel has been stored in
memory.
2
Press ꢂ or ꢃ to select the desired
ꢁ
If you press and hold ꢂ or ꢃ, you can
These are the basic steps necessary to oper-
ate the XM.
channel select mode.
Press ꢂ or ꢃ repeatedly to switch between
the following settings:
CH NUMBER (Channel number select
mode)—CATEGORY (Channel category
select mode)
increase or decrease channel number continu-
ously.
ꢁ
channel category. (Refer to “Switching the
channel select mode”.)
Note
ꢀ
Press FUNCTION to display the func-
To quit listening to the XM tuner, press
SOURCE to switch to another source or press
SOURCE and hold until the head unit turns off.
You can also select a channel from a desired
ꢀ XM channel select setting indicator
Shows what channel select setting has
been selected. CH.No is displayed when
CH NUMBER is selected, and CAT is dis-
played when CATEGORY is selected.
tion name.
Press FUNCTION to display the following
function:
When combining with another head
unit (or AV head unit):
• When the head unit’s power supply is OFF,
this unit is also OFF. (Selecting a source
other than XM tuner will not turn this
product off.)
• This unit’s power supply can be turned
OFF if the ignition switch is turned OFF. If
for any reason you want to switch the
power of the unit OFF, switch the vehicle’s
ignition off (turn the ACC of your vehicle to
OFF).
MODE (Channel select mode)
The next time you press the same preset tun-
ing button, the channel is recalled from
memory.
4
Press SOURCE and hold until the head
ꢁ
To return to the XM display, press BAND.
unit turns off or press SOURCE to select
another source.
Note
ꢁ XM channel number indicator
Shows to which XM channel number the
tuner is tuned to.
Depending on the head unit you are using, it
may be possible to directly switch between the
channel select mode using the allocated button
(e.g. CLOCK). For details, refer to the manual of
the head unit.
Notes
•
•
Up to 18 channels, six for each of the three
XM bands, can be stored in memory.
When channel number select mode is
selected, you can also use ꢀ and ꢁ to recall
channels assigned to preset tuning buttons
1–6.
ꢂ XM band indicator
Shows the XM band which has been
selected.
Notes
•
•
When you turn the power on, change the
source to XM tuner, or select a channel, it
may take a few seconds while this unit
acquires and processes the satellite signal
before you can hear anything.
Depending on the head unit, it may be possi-
ble to switch to channel number direct input
mode using the allocated button on the
remote control (e.g. DIRECT). For details,
refer to the manual of the head unit.
ꢃ XM preset number indicator
Shows what XM preset has been selected.
•
If a channel you have recalled cannot be
selected, a message is displayed for 2 sec-
onds and the unit returns to the operating
status before the channel was recalled.
ꢄ XM channel name
Shows the channel name of broadcast
channel.
En
En
En
Download from Www.Somanuals.com. All Manuals Search And Download.
En
XM tuner
Additional Information
Messages
Additional Information
Specifications
Selecting the channel in the
channel category
Channels are organized into various program
categories, e.g. Rock, Classic, Jazz. You can
search between different categories, and
then search among channels within each
channel category.
Display the ID code (Radio
ID)
Each XM tuner is identified with a unique
Radio ID. You will need the Radio ID when
activating XM service or when reporting a
problem. How to display the ID code depends
on the channel select mode.
When problems occur with the XM tuner, a message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action.
General
Power source ...................... 14.4 V DC (10.8 – 15.1 V
allowable)
Message
Cause
Action
Grounding system .............. Negative type
Max. current consumption
............................................. 2.0 A
Dimensions (W × H × D) ..... 179 × 27 × 139 mm
(7 × 1 × 5-1/2 in.)
ANTENNA
The XM antenna is not
connected.
Check whether the XM antenna cable is
attached securely.
A short-circuit occurring in
the antenna or the surrounding
antenna cable.
Make sure that there is nothing unusual
with the antenna or antenna cable. Turn the
ignition off and then on.
1
Select the channel category select
mode. (Refer to “Switching the channel
select mode” above.)
Note
Weight ................................. 0.57 kg (1.26 lbs)
Carefully check your XM Radio ID. The letters F,
I, O, and S are not used.
UPDATING
Radio is being updated with
latest encryption code.
Wait until the encryption code is fully
updated. Channels 000 and 001 should
function normally.
XM tuner
Frequency range ................. 2,332.50 – 2,345.00 MHz
Usable sensitivity
2
Press BAND to return to the previous
display.
NOSIGNAL
LOADING
OFF AIR
XM signal is too weak at the
current location.
Wait until the car reaches a location
with a stronger signal.
Satellite ....................... – 105.0 dBm
Terrestrial .................... – 102.0 dBm
Channel number select mode
If you select CH 000, the ID code is displayed.
3
Press ꢀ or ꢁ to select the desired
channel category.
Unit is acquiring audio or
program information.
Wait until the unit has received the
information.
Audio
Once you select a channel category, the unit
searches for channels in that category.
During search, the channel category doesn’t
immediately change even if you press the
button. To successively change the channel
category, continue pressing the button.
Signal-to-noise ratio ........... 90 dB (IHF-A network)
Separation .......................... 85 dB
ꢀ
Press ꢂ or ꢃ to select the channel
The channel currently selected
has stopped broadcasting.
Select another channel.
number zero (CH 000).
– – – – – – – –
The user has selected a channel
number that does not exist or is
not subscribed to.
Automatically switches to Channel 001.
Antenna
Power source (Provided by the satellite line)
............................................. 4.9 V DC
(4.4 – 5.4 V allowable)
Channel category select mode
RADIO ID is provided as a channel category
for displaying the ID code.
– – – –
There is no artist name/feature,
song/program title, or channel
category associated with the
channel at that time.
No action needed.
Max. current consumption
4
Press ꢂ or ꢃ to select the desired
............................................. 0.1 A
Type ..................................... Active type
Dimensions
channel in the selected channel category.
The channel number moves up or down in
the selected channel category.
Channels that cannot currently be selected
are skipped, and the next channel in that
channel category is selected.
ꢀ
Press ꢀ or ꢁ to select the RADIO ID
Base (W × H × D) ........ 29 × 14 × 40 mm
[1-1/8 × 1/2 × 1-5/8 in]
Cord ............................. 5 m
from channel category.
Note
Weight ................................. 0.06 kg (0.13 lbs)
Notes
When the messages that is not listed above are displayed, refer to the operation manual supplied
with the head unit.
•
•
If you select another channel, display of the
ID code is canceled.
Display of the ID code repeats displaying
RADIO ID and the ID code one after the
other.
Note
Note
If you select a channel of another category by
channel recall, etc., during steps 3 and 4, the
category selected in step 3 still remains in
memory. If you press ꢂ or ꢃ, the channel num-
ber moves up or down in the category selected
in step 3 regardless of the category of the pre-
sent channel.
Due to possible improvements, specifications
and design are subject to change without
notice.
En
En
En
Download from Www.Somanuals.com. All Manuals Search And Download.
|