Fieldbus: CAN
PC/104 and SMALL FORM FACTORS
Resource Guide 2006
PEAK-System Germany
Otto-Roehm-Strasse 69 • Darmstadt, D-64293
Tel: +49-6151-8173-20 • Fax: +49-6151-8173-29
PCAN-PC/104 CAN
The PCAN-PC/104 is a compact and powerful PC/104
CAN plug-in card, which enables two CAN networks to
be simultaneously networked with a PC/104 system.
There is ample flexibility when configuring the card to
port addresses and eight interrupt assignments from
which to choose. Two Philips SJA1000 CAN controllers
are used. For ease of installation, the port addresses
available to the user are 200H to 3A0, and the hard-
ware interrupts are IRQ3, IRQ4, IRQ5, IRQ7, IRQ10,
IRQ11, IRQ12, and IRQ15. They can be set by means of
jumpers. Multiple PCAN-PC/104 cards can be operated
without any problem (interrupt sharing).
■
■
■
■
■
■
Baud rate settings up to 1 Mbaud; CAN bus connection via
Sub-D, 9-pin (to CiA DS102-1)
Two can be configured totally independently; SJA1000 CAN
controller with 16 MHz clock frequency
Multiple PC/104 cards can be operated in parallel (interrupt
sharing)
Device drivers (VxD) and interface DLL for WIN 9x/ME, NT/2000/XP,
Linux, and RT-Linux support
Choice of 14 different port addresses and eight different interrupt
addresses
The PCAN-PC/104 card package includes software and
sources for in-house programming.
Works 100 percent with CANfestival (free CANOpen Master/Slave
SW stack for LINUX)
For more information, contact: [email protected]
52 / 2006 PC/104 and Small Form Factors Resource Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|