Operating Instructions
DVD Recorder
Model No.
DMR-ES15EB/EBL
(Model suffix: “EB” for UK model, “EBL” for Ireland model)
Region number supported by
this unit
Region numbers are allocated to DVD
players and DVD-Video according to
where they are sold.
• The region number of this unit is “2”.
• The unit will play DVD-Video marked
with labels containing “2” or “ALL”.
Example:
2
3
2
ALL
5
Dear customer
Thank you for purchasing this product. For
optimum performance and safety, please read
these instructions carefully.
Before connecting, operating or adjusting this
product, please read the instructions
completely.
Please keep this manual for future reference.
Note
“EB” on the packaging indicates the United
Kingdom.
RQT8320-1B
EB EBL
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Getting started
Editing
Quick access to a variety of useful functions–
Editing titles/chapters . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Editing titles/chapters and playing chapters . . . . . . . . 30
Title operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Creating, editing and playing playlists . . . . . . . . . . . . . 32
Creating playlists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Editing and playing playlists/chapters . . . . . . . . . . . . . 33
Playlist operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
“FUNCTIONS” menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . .2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
The remote control information. . . . . . . . . . . . . . . . . . . . .7
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
TV Tuning (Auto Setup) . . . . . . . . . . . . . . . . . . . . . . . . . .12
Set up to match your television and remote control. . .14
Copying
Copying from a video cassette recorder . . . . . . . . . . . 34
DV automatic recording
Manual recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
. . . . . . . . . . . . 34
DV Auto Rec
Recording
Important notes for recording . . . . . . . . . . . . . . . . . . . . .16
Recording modes and approximate recording times. . .17
Disc Insertion/Ejection . . . . . . . . . . . . . . . . . . . . . . . . .17
Recording television programmes . . . . . . . . . . . . . . . . .18
To specify a time to stop recording
–One Touch Recording. . . . . . . . . . . . . . . . . . . . . . . .19
Flexible Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Playing while you are recording . . . . . . . . . . . . . . . . . .19
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Using VIDEO Plus+ system to make timer recordings .20
Manually programming timer recordings. . . . . . . . . . . .21
To cancel recording when recording has already
begun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
To release the programme from recording standby . . .21
Notes on timer recording. . . . . . . . . . . . . . . . . . . . . . . .21
Check, change or delete a programme. . . . . . . . . . . . .22
Making timer recordings on the television. . . . . . . . . . .22
Recording from a satellite/digital terrestrial receiver . .23
Manual Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Linked timer recordings with external equipment (SKY
Digital STB/digital terrestrial receiver)–EXT LINK . . .23
Convenient functions
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using DELETE Navigator to delete titles. . . . . . . . . . . 35
Deleting titles during play . . . . . . . . . . . . . . . . . . . . . . 35
DVD Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Common procedures. . . . . . . . . . . . . . . . . . . . . . . . . . 36
Providing a name for a disc. . . . . . . . . . . . . . . . . . . . . 36
Setting the protection . . . . . . . . . . . . . . . . . . . . . . . . . 36
Deleting all titles and playlists –Delete all titles. . . . . . 36
Deleting all the contents of a disc –Format Disc . . . . . 36
Selecting whether to show the Top Menu first
–Auto-Play Select . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enabling discs to be played on other equipment
–Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Creating Top Menu –Create Top Menu . . . . . . . . . . . . 37
Enabling the second layer on DL (dual- or double- layer
on single side) discs to be recordable
–Close First Layer. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Linked operations with the TV (Q Link) . . . . . . . . . . . . 38
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the unit’s settings . . . . . . . . . . . . . . . . . . . . . 39
Common procedures. . . . . . . . . . . . . . . . . . . . . . . . . . 39
Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Set the clock manually . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Resetting channel setting . . . . . . . . . . . . . . . . . . . . . . . 42
TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Playing back
Playing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Changing audio during play . . . . . . . . . . . . . . . . . . . . .24
Operations during play . . . . . . . . . . . . . . . . . . . . . . . . .25
Using menus to play MP3 and
still pictures (JPEG/TIFF) . . . . . . . . . . . . . . . . . . . . . . .26
Playing MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Playing still pictures (JPEG/TIFF) . . . . . . . . . . . . . . . . .27
Useful functions during still picture play . . . . . . . . . . . .27
Using on-screen menus/FUNCTIONS window and Status
message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . .28
FUNCTIONS window . . . . . . . . . . . . . . . . . . . . . . . . . .29
Status message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Reference
Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . 45
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Safety precautions
Placement
Foreign matter
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not place heavy items on the unit.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs, disconnect
the AC mains lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
RQT8320
Do not handle the plug with wet hands. This can cause electric
shock.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Included accessories
Please check and identify the supplied accessories. Use numbers when asking for replacement parts.
(Product numbers correct as of December 2005. These may be subject to change.)
To order accessories, refer to “Sales and Support Information” (Ô below).
1 Remote control
1 AC mains lead
2 RF coaxial leads (black)
1 RF coaxial lead (grey)
(EUR7659Y50)
(RJA0044-3C)
(K1TWACC00001)
(K1TWACA00001)
• For use with this unit only.
Do not use it with other
equipment.
Also do not use the cords for other
equipment with this unit.
2 Batteries
R6 Size
1 Audio/video cable
(K2KA6BA00003)
for remote control
n Sales and Support Information
Customer Care Centre
• For customers within the UK: 08705 357357
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information
• E-mail: [email protected]
• Or go on line through our Internet Accessory ordering
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a
wide range of finished products, take a browse on our
website for further details.
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product
with ease and confidence by phoning our Customer Care
Centre Monday-Thursday 9:00am-5:30pm, Friday 9:30am-
5:30pm (Excluding public holidays).
Interested in purchasing an extended guarantee?
Please call 0870 240 6284 or visit our website
Disc handling
• Do not use the following discs:
–Discs with exposed adhesive from removed stickers or
labels (rental discs, etc.).
n How to hold a disc
Do not touch the recorded surface.
–Discs that are badly warped or cracked.
–Irregularly shaped discs,
such as heart shapes.
• Do not place in the following
areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
n Concerning non-cartridge discs
Be careful about scratches and dirt.
–Locations susceptible to significant difference in
temperature (condensation can occur).
–Where static electricity or electromagnetic waves occur.
• To protect discs from scratches and dirt, return them to their
cases or cartridges when you are not using them.
n If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
The manufacturer accepts no responsibility and offers
no compensation for loss of recorded or edited material
due to a problem with the unit or recordable media, and
accepts no responsibility and offers no compensation
for any subsequent damage caused by such loss.
Examples of causes of such losses are
n Handling precautions
Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
•
• A disc recorded and edited with this unit is played in a
DVD Recorder or computer disc drive manufactured by
another company.
• A disc used as described above and then played again in
this unit.
• A disc recorded and edited with a DVD Recorder or
computer disc drive manufactured by another company is
played in this unit.
• Write on the label side of the disc only with a soft, oil-based
felt pen. Do not use ballpoint pens or other hard writing
implements. (This may cause disc warping and un-
balanced rotation, rendering it unusable.)
• Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
• Do not use scratch-proof protectors or covers.
•
Do not drop stack, or impact discs. Do not place objects on them.
Unit care
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or
breakdown.
Observe the following points to ensure continued
listening and viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making
it impossible to record or play discs.
Use the DVD lens cleaner (RP-CL720E) about once every
year, depending on frequency of use and the operating
environment. Carefully read the lens cleaner’s instructions
before use.
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc
and the unit.
RQT8320
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
Remote control
1 Turn the unit on/off (Ô page 12)
2 Select channels and title numbers etc./Enter numbers
3 Cancel
bo
4 Basic operations for recording and play
5 Skip the specified time (Ô page 25)
6 Show Direct Navigator/Top menu (Ô page 24, 26, 30)
7 Selection/Enter, Frame-by-frame (Ô page 12, 25)
8 Show sub menu (Ô page 27, 30, 33)
9 Show on-screen menu (Ô page 28)
bk Manual tuning operation (Ô page 42)
bl Select Audio (Ô page 24)
1
2
bp
bq
br
bs
bt
bm Start recording (Ô page 18)
bn Change recording mode (Ô page 18)
bo Transmit the remote control signal
bp Television operations (Ô page 15)
bq Channel select (Ô page 18)
3
4
br Show VIDEO Plus+ screen (Ô page 20)
bs Input select (AV1, AV2, AV3 or DV)
bt Delete items (Ô page 35)
ck Skip 30 seconds forward (Ô page 25)
cl Show timer recording programme screen (Ô page 21)
cm Show FUNCTIONS window (Ô page 2, 14, 29)
cn Return to previous screen
co Create chapter (Ô page 25)
cp Show status messages (Ô page 29)
cq Recording function
5
6
ck
cl
cm
7
8
9
bk
bl
cn
co
cp
cr Direct TV recording (Ô page 38)
cs Linked timer recordings with external equipment (Ô page 23)
cq
cr
cs
bm
bn
Main unit
1
2
3
4
5 6
8
bl
EXT LINK
CH
AV3
DV IN
7
9 bk bm
Opening the front panel
Press down on the
with your finger.
part
1 Standby/on switch (8) (Ô page 12)
6 Channel select (Ô page 18)
7 Open/close disc tray (Ô page 18)
8 Display (Ô below)
9 Stop (Ô page 18, 25)
bk Start play (Ô page 24)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Disc tray (Ô page 18)
3 Connection for digital video (DV) camcorder (Ô page 34)
4 Connection for camcorder etc. (Ô page 34)
5 Linked timer recordings with external equipment
(Ô page 23)
bl Remote control signal sensor
bm Start recording (Ô page 18)/
Specify the time to stop recording (Ô page 19)
The unit’s display
1 Linked timer recordings with external equipment
indicator
1 23
2 Disc indicator
• This indicator lights up when a disc that is supported by
this unit is inserted.
3 Timer recording indicator
4 Main display section
5 Playing indicator
RQT8320
4
5
6
6 Recording indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Disc information
Discs you can use for recording and play
Disc type
DVD-RAM
DVD-R
DVD-RW
+RW
DVD-R DL
1
+R
2
+R DL
1
(dual layer on
single side)
(double layer
on single side)
Indication in these
instructions by
-R
Before
-R DL
Before
-RW(V)
Before
+R
Before
+R DL
Before
finalization
finalization
finalization
finalization
finalization
RAM
+RW
DVD-V
After
DVD-V
After
DVD-V
After
DVD-V
After
DVD-V
After
finalization
finalization
finalization
finalization
finalization
Logo
––––
––––
––––
+VR
Recording format
(Ô below)
VR
DVD-Video
×
DVD-Video
×
DVD-Video
+VR
×
+VR
×
Re-writable
3
What you can do on this unit
Recording
broadcasts that
allow one copy
×
×
×
×
×
×
×
×
×
×
×
×
4
Recording both
M 1 and M 2 of
bilingual
broadcasts
Recording 16:9
aspect picture
×
×
×
×
×
×
×
×
×
×
×
×
Creating playlists
Compatibility
Usable high
speed recording
Up to 5x
Up to 16x
Up to 4x
7
Up to 6x
Up to 16x
Up to 2.4x
8
Up to 4x
6
disc type
5
Play on other
players
Only on DVD-
RAM
compatible
players. (It is
not possible to
finalize the
disc.)
(It is not
possible to
finalize the
disc.)
Only on compatible players after finalizing the disc (Ô page 37)
: Can do, ×: Cannot do
• We recommend using Panasonic discs. We also recommend using DVD-RAM discs with cartridges to protect them from scratches and dirt.
• You may not be able to record depending on the condition of the discs and you may not be able to play due to the condition of the recording.
• For the recording time, refer to “Recording modes and approximate recording times” on page 17.
• You cannot record programmes that allow “One time only recording” to CPRM compatible DVD-R and DVD-RW on this unit. You can record
other programmes as DVD-Video format.
1 You cannot continue a recording from the first layer to the second layer on dual- or double-layer discs. To record onto the second layer, you
must first close the first layer using the “Close First Layer” item in DVD Management (Ô page 37). You will no longer be able to record to the
first layer after you do this (Ô page 16).
When playing a title recorded on both layers, video and audio may momentarily cut out when the unit is switching layers.
2 You may not be able to use +R recorded on this unit in another Panasonic DVD recorder and vice versa. Once the disc is finalized, however,
it can be played in the other unit.
3 The amount of the recordable disc space doesn’t increase even if the programme is deleted when you use a one time recording disc.
4 CPRM (Ô page 49) compatible discs only.
5 This unit can use the high-speed recording discs shown in the chart, but using them will not shorten the recording time.
6 You can play 8x recording speed discs recorded on another equipment.
7 Play on DVD-R DL compatible equipment.
8 Play on +R DL compatible equipment.
Regarding recording format
VR (DVD Video Recording) format
This is a recording method which allows you to freely record and edit television broadcasts and so on.
• Digital broadcasts that allow “One time only recording” can be recorded to a CPRM compatible disc. You can record to CPRM compatible
DVD-RAM on this unit.
• Play is only possible on a compatible DVD player.
DVD-Video format
This recording method is the same as commercially available DVD-Video.
• Digital broadcasts that allow “One time only recording” cannot be recorded.
• You can play on compatible equipment such as DVD players after finalizing the disc on this unit.
RQT8320
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Play-only discs
Disc type
DVD-Video
DVD-Audio
DVD-RW (VR format)
Indication in these
instructions
DVD-V
DVD-A
-RW(VR)
Logo
Instructions
High quality movie
and music discs
High fidelity music
discs
• Played on this
unit in
DVD-RW recorded on another DVD Recorder
• You can play programmes that allow “One time only recording” if they have
been recorded to a CPRM compatible disc.
• By formatting (Ô page 36) the disc, you can record to it in DVD-Video format.
• It may be necessary to finalize the disc on the equipment used for recording.
1
2 channels.
Disc type
Audio CD
Video CD
DVD-R
CD
SVCD
2
Indication in these
instructions
MP3
JPEG
MP3
JPEG
CD
VCD
Logo
––––
Instructions
Music and audio recorded
(including CD-R/RW
Music and video recorded
(including CD-R/RW
CD-R/RW and DVD-R 1 with MP3/Still pictures (JPEG
and TIFF)
1
)
1)
• The producer of the disc can control how discs are played. So you may not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
1 Close the session after recording. Play may be impossible on some discs due to the condition of the recording.
2 Conforming to IEC62107.
Regarding DVD-Audio
Some multi-channel DVD-Audio will prevent down-mixing (Ô page 49) of all or part of their contents if this is the manufacturer’s intention. Tracks
that are prevented from being down-mixed will not play properly on this unit (e.g. audio is played from the front two channels only). Refer to the
disc’s jacket for more information.
Discs that cannot be played
• 2.6 and 5.2 GB DVD-RAM, 12 cm
• 3.95 and 4.7 GB DVD-R for Authoring
• DVD-R recorded by VR format
• DVD-R (DVD-Video format), DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL recorded on another unit and not finalized
(Ô page 49).
• DVD-Video with a region number other than “2” or “ALL”
• Blu-ray
• DVD-ROM, +R (8 cm), CD-ROM, CDV, CD-G, Photo CD, CVD,
SACD, MV-Disc, PD, DivX Video Disc, “Chaoji VCD” available on
the market including CVD, DVCD and SVCD that do not conform to
IEC62107, etc.
Types of disc for the type of
connected TV
When you use the discs recorded either PAL or NTSC, refer to this
table.
(
: Possible to view, ×: Impossible to view)
TV type
Disc
PAL
Yes/No
Multi-system TV
NTSC
PAL
3
×
NTSC TV
PAL TV
NTSC
PAL
4
NTSC
5 (PAL60)
3 If you select “NTSC” in “TV System” (Ô page 43), the picture
may be clearer.
4 Select “NTSC” in “TV System” (Ô page 43).
5 If your television is not equipped to handle PAL 525/60 signals
the picture will not be shown correctly.
The remote control information
n Batteries
• Insert so the poles (+ and –)
match those in the remote
control.
n Use
Remote control signal sensor
• Do not use rechargeable type
batteries.
• Do not mix old and new
batteries.
20
20
30
30
• Do not use different types at
the same time.
R6/LR6, AA
7 m directly in front of the unit
• Do not heat or expose to flame.
• Do not take apart or short circuit.
• Do not attempt to recharge alkaline or manganese batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
RQT8320
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Use of the supplied RF coaxial leads
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit
to your TV and aerial outlet or aerial lead, as shown in connection types A-C.
• Keep the RF coaxial leads as far away as possible from other leads.
• Do not roll up the RF coaxial leads.
• Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 2.
• Choose from one of the connection types A-C that suits your requirement.
Connecting to a television only
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (Ô page 38).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
“AV1 Output” in the Setup menu (Ô page 40)
To household mains socket
Television’s rear panel
To household mains socket
(AC 220 V to 240 V, 50 Hz)
VHF/UHF
RF IN
AV IN
4
RF coaxial lead
(included, black)
AC mains lead
(included)
Connect only after all other
connections are complete.
2
3
4
Fully wired 21-pin
Scart lead
(For Q Link functions)
This unit’s rear panel
Use one of the RF coaxial lead (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial lead.
To the aerial
This unit
RF coaxial lead (included, grey)
1
or
RF coaxial lead (included, black)
1
Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).
After completing the above connections, proceed to the TV Tuning (Ô page 12).
RQT8320
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a television and Satellite/Digital terrestrial receiver
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (Ô page 38).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
“AV1 Output” and “AV2 Input” in the Setup menu (Ô page 40–41)
To household mains socket
Television’s rear panel
VHF/UHF
RF IN
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AV IN
To the
aerial
6
RF coaxial
lead
RF coaxial lead
(included, black)
AC mains lead
(included)
Connect only after all other
connections are complete.
1
3
4
6
Fully wired 21-pin
Scart lead
(For Q Link functions)
This unit’s rear panel
Fully wired 21-pin Scart lead
(For External Link function)
RF coaxial
lead
To household mains socket
(included,
black)
2
5
RF
OUT
AV OUT
6
RF
IN
Satellite/Digital terrestrial
receiver’s rear panel
To view satellite/digital terrestrial programmes
Press [INPUT SELECT] to select the input channel “AV2” or put this unit in standby mode.
To record satellite/digital terrestrial programmes
Refer to “Recording from a satellite/digital terrestrial receiver” (Ô page 23).
Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).
After completing the above connections, proceed to the TV Tuning (Ô page 12).
RQT8320
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connecting to a television and VCR
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (Ô page 38).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
“AV1 Output” and “AV2 Input” in the Setup menu (Ô page 40–41)
To household mains socket
Television’s rear panel
VHF/UHF
RF IN
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AV IN
To the
aerial
6
RF coaxial
lead
RF coaxial lead
(included, black)
AC mains lead
(included)
Connect only after all other
connections are complete.
1
3
4
6
Fully wired 21-pin
Scart lead
(For Q Link functions)
This unit’s rear panel
Fully wired 21-pin Scart lead
(For External Link function)
RF coaxial
lead
(included,
black)
2
5
To household mains socket
RF
AV OUT
OUT
Connect the unit directly to the television
RF
IN
Video signals fed through video cassette recorders will
be affected by copyright protection systems and the
picture will not be shown correctly on the television.
6
VCR’s rear panel
Television
Television
This unit
VCR
VCR
This unit
To copy from a VCR
Refer to “Copying from a video cassette recorder” (Ô page 34).
Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).
After completing the above connections, proceed to the TV Tuning (Ô page 12).
RQT8320
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
Connecting to a television with AUDIO/VIDEO
terminals
Connecting to a television with S VIDEO terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Television’s rear panel
Television’s rear panel
COMPONENT
VIDEO IN
AUDIO IN VIDEO S VIDEO
IN IN
COMPONENT
VIDEO IN
AUDIO IN VIDEO S VIDEO
IN IN
R
L
R
L
Red White Yellow
Red White
Audio/video cable
(included)
Audio/video cable
(included)
S Video
cable
Red White Yellow
Red White
This unit’s rear panel
This unit’s rear panel
Connecting to a television with COMPONENT VIDEO terminals
Television’s rear panel
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (Ô page 49) and provide a purer picture than the
S VIDEO OUT terminal.
COMPONENT
VIDEO IN
AUDIO IN VIDEO S VIDEO
IN IN
R
L
• Connect to terminals of the same colour.
If you have a regular television (CRT : cathode ray tube)
Use component output with progressive “Off” (Factory setting,
Ô page 40), even if it is progressive compatible, because
progressive output can cause some flickering. This is the same for
multi system televisions using PAL mode.
Red White
Video cable
CRT
Audio/video cable
(included)
COMPONENT
VIDEO OUT
Progressive output
COMPONENT
VIDEO IN
Red White
This unit
This unit’s rear panel
Connecting to an amplifier or system component
n Connecting to an amplifier with a digital input
n Connecting to a stereo amplifier
terminal
• To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
Required setting
“Digital Audio Output” in the Setup menu (Ô page 40)
• Before purchasing an optical digital audio cable, check the terminal
shape of the connected equipment.
• You cannot use DTS Digital Surround decoders not suited to DVD.
• Even if using this connection, output will be only 2 channels when
playing DVD-Audio.
Amplifier’s rear panel
Amplifier’s rear panel
AUDIO IN
OPTICAL IN
R
L
Optical digital audio cable
Do not bend this cable sharply.
Red White
Insert fully, with this side facing up.
Audio cable
Red White
RQT8320
This unit’s rear panel
This unit’s rear panel
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Tuning (Auto Setup)
3
4
When setup has completed, the confirmation
screen appears.
Press [ENTER].
The Owner ID settings screen appears.
Press [q] and press the numbered
buttons to enter your choice of a 4-
digit PIN number.
8
Owner ID
^ DVD
PIN number
Name
House No.
RETURN
Postcode
RETURN
:
leave
Numbered
buttons
Make a note of the PIN number (don’t forget), as it is
not possible to return to the factory preset.
VIDEO Plus+
5 Press [ENTER] to store the PIN
number.
6 Press [w,q] to select “Yes” and press
[ENTER].
The cursor moves to “Name”.
7 Press [q].
8 Press [e,r] to select a letter and then
e,r,w,q
ENTER
press [q] to move to next character.
Repeat this to enter the name.
RETURN
9 Press [ENTER] to store the name.
10Press [r] and [q], and then repeat
steps 8, 9 to enter and store “House
11PNroe.”ssan[RdE“TPUoRstNc]o.de”.
1 Turn on the mains for the television
The Owner ID settings screen disappears.
(and connected equipment) and select
the AV input for this unit.
To abort Auto Setup
Press [RETURN].
2 Press [^ DVD] to turn the unit on.
n If the clock setting menu appears
•
If the TV is Q Link compatible, it will start to
download TV tuning information to this unit
.
Set the clock manually (Ô page 41).
Download from TV
n To confirm that stations have been tuned
Pos
2
correctly (Ô page 42)
Download in progress. Please wait.
RETURN : to cancel
n Resetting channel setting (Ô page 42)
n To enter the satellite station’s name
RETURN
(Ô page 42)
The name of the satellite station may not be set
automatically.
(“––––” will appear under “Name” in the programme list.)
In this case, enter the name manually.
• If the TV is not Q Link compatible, Auto Setup will
start to tune in all available TV stations. This may
take about 5 minutes.
Auto-Setup
Ch
21
Note
Auto-Setup in progress. Please wait.
RETURN : to cancel
If this unit is connected to a digital TV (Freeview), only the
analogue station’s tuning information will be downloaded.
RETURN
RQT8320
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording from satellite
receiver with VIDEO Plus+
This unit is not designed to control (turn on or change
channels on) your satellite receiver. However, you can use
VIDEO Plus+ Recording by making the satellite receiver’s
VIDEO Plus+ numbers available for recognition on this unit.
Take the following steps to make all satellite stations
available for recognition on this unit.
Through these steps, you can make timer recording from
satellite stations with VIDEO Plus+ constantly available as
the unit keeps the setting in memory.
Preparation
• Turn on the Satellite receiver(s).
• Select a correct station on the Satellite receiver(s).
1 Press [VIDEO Plus+].
VIDEO Plus+
Record
Remain
1:57 SP
7/
8:12:34
5
SUN
Input PlusCode Number 0-9, and press ENTER.
ENTER
RETURN
0
--
9
Number
2 Press the numbered buttons to enter
the VIDEO Plus+ number for a satellite
station (e.g. Sky One).
• To correct the number
Press [w] to correct any mistakes.
3 Press [ENTER].
“––––” will appear in the “Name” column.
Timer
Recording
Remain 1:57 SP
8:14:56 7/
5
SUN
Name
Date
SUN
Start
Stop
Mode
SP
7/
5
19:00
20:00
Programme Name
Please select channel.
ENTER
RETURN
CANCEL
0
--
9
Number
4 Press [e,r] to select the channel or
AV input that is to be used for
recording from the satellite station.
5 Press [ENTER].
Timer
Remain
1:57 SP
Recording
8:15:45
7/
5
SUN
Drive
space
OK
No. Name
01 AV2 7/
Date
Start
Stop Mode
20:00 SP
5
SUN 19:00
New Timer Programme
ENTER
RETURN
S
SUB MENU
CANCEL
A
Timer Off
6 Press [e] to select the programme
that you have just set and press [ ] to
delete it from the timer recording list.
It is no longer needed.
Repeat the steps above until you have set dummy timer
recordings for each of the satellite stations that you will
make VIDEO Plus+ recordings from.
To exit the screen
Press [RETURN].
RQT8320
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up to match your television and remote control
5 Press [e,r] to select “TV Aspect” and
press [ENTER].
6 Press [e,r] to select the TV aspect
and press [ENTER].
; OPEN/CLOSE * REC
TV Aspect
Setup
16:9 WIDE TV
16:9
Tuning
4:3 TV
Disc
4:3
Picture
Letterbox
Sound
Display
SELECT
TVoperation
buttons
Connection
ENTER
Others
RETURN
• 16:9: 16:9 widescreen television
• 4:3: 4:3 standard aspect television
Numbered
buttons
RAM
Even if it records and plays, the aspect does
not change.
DVD-V
Video recorded for a widescreen is played as
Pan & Scan (unless prohibited by the producer
of the disc) (Ô page 49).
• Letterbox: 4:3 standard aspect television
Widescreen picture is shown in the letterbox style
(Ô page 49).
To enjoy progressive video
You can enjoy progressive video by connecting this unit’s
COMPONENT VIDEO OUT terminals to an LCD/plasma
television or LCD projector compatible with progressive scan
(Ô page 49).
FUNCTIONS
RETURN
e,r,w,q
ENTER
1
While stopped
Press [FUNCTIONS].
* REC
2 Press [e,r] to select “To Others” and
press [ENTER].
Selecting television type and
aspect
3 Press [e,r] to select “Setup” and
press [ENTER].
Choose the setting to suit your television and preference.
4 Press [e,r] to select “Connection”
1
While stopped
and press [q].
Press [FUNCTIONS].
5 Press [e,r] to select “AV1 Output”
2 Press [e,r] to select “To Others” and
and press [ENTER].
press [ENTER].
6 Press [e,r] to select “Video ( with
FUNCTIONS No Disc
No Disc
component )” or “S Video ( with
VIDEO Plus
+
Record
Recording
To Others
component )” and press [ENTER].
Set according to the signal and terminal of the
connected TV.
Setup
ENTER
RETURN
7 Press [e,r] to select “Progressive”
and press [ENTER].
3 Press [e,r] to select “Setup” and
8 Press [e,r] to select “On” and press
press [ENTER].
[ENTER].
Setup
Manual
Output becomes progressive.
Auto-Setup Restart
Note
Download from TV
Tuning
Disc
• When connected to a CRT (Cathode ray tube) television or
a multi system television using PAL mode, even if it is
progressive compatible, progressive output can cause
some flickering. Turn off “Progressive” if this occurs.
• Picture will not be displayed correctly if connected to an
incompatible television.
• There is no output from the COMPONENT VIDEO OUT
terminals if “AV1 Output” in the Setup menu is set to
“RGB 1 ( without component )” or “RGB 2 ( without
component )” (Ô page 40).
Picture
Sound
Display
Connection
SELECT
RETURN
TAB
Others
4 Press [e,r] to select “Connection”
and press [q].
To exit the screen
Press [RETURN] several times.
RQT8320
To return to the previous screen
Press [RETURN].
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Television operation
You can operate the TV through the unit’s remote control.
When other Panasonic products
respond to this remote control
When other Panasonic products placed nearby affect this
unit’s remote control, change the remote control code on the
main unit and the remote control (the two must match).
Under normal circumstances use the factory set code
“DVD 1”.
Volume
Turn TV on/off
To change the code on the main unit
Input Select
Channel
Select
1
While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
Point the remote control at the television
While pressing [^ TV], enter the code with
press [ENTER].
3 Press [e,r] to select “Setup” and
the numbered buttons.
press [ENTER].
e.g., 01: [0] Ô [1]
Manufacturer and Code No.
4 Press [e,r] to select “Others” and
Brand
Code
Brand
NOKIA
Code
press [q].
01/02/03/
04/45
Panasonic
25/26/27
5 Press [e,r] to select “Remote
Control” and press [ENTER].
AIWA
35
NORDMENDE
ORION
10
AKAI
27/30
09
37
6 Press [e,r] to select the code
BLAUPUNKT
BRANDT
BUSH
PHILIPS
PHONOLA
PIONEER
PYE
05/06
31/33
38
(“DVD 1”, “DVD 2” or “DVD 3”) and
press [ENTER].
10/15
05/06
31
Remote Control
Setup
CURTIS
DESMET
DUAL
05/06
05/06
10
Press " " and "ENTER" together
for more than 2 seconds on the remote
control.
Tuning
Disc
05/31/33 RADIOLA
Picture
Sound
05/06
31
SABA
Display
Connection
Others
ELEMIS
FERGUSON
SALORA
SAMSUNG
SANSUI
26
ENTER
RETURN
10
31/32/43
05/31/33
21
To change the code on the remote control
GOLDSTAR/LG 31
7 While pressing [ENTER], press and
GOODMANS
GRUNDIG
05/06/31 SANYO
09
SBR
06
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
22/23/31/
40/41/42
05/06/29/
30/31
HITACHI
SCHNEIDER
8 Press [ENTER].
INNO HIT
IRRADIO
ITT
34
SELECO
SHARP
06/25
18
n When the following indicator appears on the
unit’s display
30
25
SIEMENS
SINUDYNE
SONY
09
Press and hold [ENTER]
and the indicated number
button at the same time for
more than 2 seconds.
JVC
17/39
07/46
05/06/33
08
LOEWE
10/11/12/
13/14
METZ
28/31
TELEFUNKEN
Note
MITSUBISHI
MIVAR
06/19/20 THOMSON
10/15/44
16
Executing “Shipping Condition” in the Setup menu returns
the main unit code to “DVD 1”. Change the remote control
code to 1 (Ô step 7).
24
TOSHIBA
WHITE
WESTINGHOUSE
NEC
36
05/06
To exit the screen
Press [RETURN] several times.
Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows
correct operation.
• If your television brand is not listed or if the code listed for
your television does not allow control of your television, this
remote control is not compatible with your television.
To return to the previous screen
Press [RETURN].
RQT8320
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes for recording
RAM
-R -R DL -RW(V) +R +R DL +RW
Select the main or secondary audio before
recording
Both main and secondary audio can be
recorded
You can change the audio during playback.
(Ô page 24, “Changing audio during play”)
(Ô page 40, “Bilingual Audio Selection”)
The selected audio only is recorded.
Recording of
bilingual
M 1
M 2
M 1
Hello
Hallo
Hello
programme
If you record from external equipment
–Select both “M 1” and “M 2” on the external
equipment.
If you record from external equipment
–Select “M 1” or “M 2” on the external
equipment.
RAM
-R -R DL -RW(V) +R +R DL +RW
Recording of
Widescreen
broadcasting
16:9 aspect (Widescreen)
Recorded in 4:3 aspect
It is not possible to record digital broadcasts that allow “One time only recording” onto DVD-R,
DVD-R DL, DVD-RW, +R, +R DL, +RW or 8 cm DVD-RAM discs. Use a CPRM (Ô page 49)
compatible DVD-RAM.
RAM
-R -R DL -RW(V) +R +R DL +RW
(CPRM compatible disc only)
Recording of digital
broadcasting
: Can do, ×: Cannot do
-R -R DL -RW(V) +R +R DL
The disc must be finalized after recording (Ô page 37).
It is necessary to finalize DVD-R, etc. on this unit after recording or copying titles to them. You can
then play them as a commercially sold DVD-Video. However, the discs become play-only and you
can no longer record or copy.
You can record or copy again if you format DVD-RW.
Playing the disc on
other DVD players
Recorded to DVD-R, etc.
Play on other DVD equipment
G
RCH
SEA
R
ENTE
V
OL
A
Y
U
D
ISPL
T
OP
MEN
URN
RET
U
O
MEN
OFF
D
C
IN
9V
EN
OP
UND
ITOR
PICT
RRO
A
T
A.SU
E
REPE
MOD
MON
E
MOD
URE
Finalize
-R DL +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
It is not possible to record continuously from the first layer to the second layer. Recording
stops when space on the first layer becomes full. You must close the first layer to start recording on
the second layer (Ô page 37, “Close First Layer”). Closing makes the first layer unavailable for
recording (editing is still available). You cannot cancel closing. Make certain before proceeding.
Recording to
DVD-R DL and
+R DL
It is not possible to
The second layer
record continuously
The available
space
from the first layer
to the second layer.
(Disc inner
side)
The first layer
Title1
(Disc outer
side)
Title2
Recording/Playback direction
RQT8320
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording modes and approximate recording times
Depending on the content being recorded, the recording
times may become shorter than indicated.
Note
• This unit uses variable bit rate (VBR) recording which
varies the amount of data recorded to suit the images, so
actual recording times and remaining recording times
shown by the unit will be different. (The difference will be
especially noticeable with DVD-R DL and +R DL.)
Use a disc with plenty of remaining time to be sure.
When recording to DVD-RAM using EP ( 8Hours ) mode,
play may not be possible on DVD players that are compatible
with DVD-RAM. In this case use EP ( 6Hours ) mode.
DVD-RAM
9.4 GB
DVD-R,
DVD-RW,
+R, +RW
4.7 GB
Recording Mode
(Double-
sided )
4.7 GB
1
•
XP (High quality)
SP (Standard)
LP (Long play)
EP (Extra long
play)
1 h.
2 h.
4 h.
8 h.
2 h.
4 h.
8 h.
1 h.
2 h.
4 h.
8 h.
FR (Flexible Recording)
16 h.
(12 h. )
2
2
2
(6 h. )
(6 h. )
The unit automatically selects a recording rate between XP
and EP ( 8Hours ) that will enable the recordings to fit in the
remaining disc space with the best possible recording quality.
• You can use FR mode in timer recordings (Ô page 20, 21,
step 3) and Flexible Recording (Ô page 19).
8 h.
FR (Flexible
Recording)
8 h.
8 h.
maximum
maximum for
one side
maximum
DVD-R DL, +R DL 3 8.5 GB
First layer (L0) Second layer (L1)
55 min. 50 min.
Using FR mode is convenient in these kind of
situations
Recording Mode
XP (High quality)
SP (Standard)
LP (Long play)
EP (Extra long
play)
• When the amount of free space on the disc makes
selecting an appropriate recording mode difficult
• When you want to record a long programme with the best
picture quality possible
1 h. 50 min.
3 h. 40 min.
7 h. 25 min.
1 h. 40 min.
3 h. 20 min.
6 h. 50 min.
2
2
e.g., Recording a 90 minutes programme to disc
(5 h. 30 min. )
(5 h. 15 min. )
FR (Flexible
Recording)
7 h. 25 min.
maximum
6 h. 50 min.
maximum
If you select XP mode
The programme will not fit one disc.
XP
60 minutes
30 minutes
4.7GB
DVD-RAM
4.7GB
DVD-RAM
SP
Full
Another disc is necessary.
LP
If you select SP mode
The programme will fit one disc.
There will be 30 minutes
remaining disc space.
2
EP ( 6Hours )
EP ( 8Hours )
Recording time
4.7GB
DVD-RAM
1
2
It is not possible to record or play continuously from one
side of a double sided disc to the other.
When “Recording time in EP mode” is set to
“EP ( 6Hours )” in the Setup menu (Ô page 39).
The sound quality is better when using “EP ( 6Hours )”
than when using “EP ( 8Hours )”.
Remains
If you select FR mode
The programme will fit one disc perfectly.
3
It is not possible to record continuously from the first layer
to the second layer.
4.7GB
DVD-RAM
Fit
Disc Insertion/Ejection
Refer to the control reference on page 14.
When the format confirmation screen is displayed
When remove a recorded disc
RAM -RW(V) +R +R DL +RW
-R -R DL -RW(V) +R +R DL
When you insert a new disc and a disc recorded on a
computer or other equipment, a format confirmation screen
might be displayed.
Format the disc to use it. However all the recorded contents
are deleted.
When you press [; OPEN/
CLOSE] on the main unit while
stopped:
The screen shown at left appears
when you have not processed the
disc for play on other equipment.
Finalize
Finalize the disc so that it can be played
on other DVD players.
Note: Recording or Editing is not possible
after finalizing. This may take up to min.
Press the REC button to start finalize.
Press the OPEN/CLOSE button to exit.
This disc cannot be played on other
DVD players without finalizing.
Format
Press [w,q] to select “Yes” and
press [ENTER].
This disc is not formatted properly.
Format it using DVD Management ?
n When finalizing the disc
Press [* REC].
Yes
No
• You cannot stop this process once you have started it.
• If you want to provide the disc with a name or set play menu
select, select “Disc Name” (Ô page 36) or “Auto-Play
Select” (Ô page 37) in “DVD Management” before
finalizing.
SELECT
ENTER
RETURN
• Several steps are necessary to format a disc. Refer to
“Deleting all the contents of a disc –Format Disc”
(Ô page 36).
RQT8320
n When opening the tray without disc finalization
17
Press [; OPEN/CLOSE] on the main unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording television programmes
2 Press [1 2 CH] to select the channel.
; OPEN/CLOSE
EXT LINK
CH
DV IN
AV3
To select with the numbered buttons:
e.g., 5:
15:
[0] Ô [5]
[1] Ô [5]
g
* REC
8
2 CH 1
q
3 Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
^ DVD
Remaining time on the disc
1 2 CH
Numbered
buttons
4 Press [* REC] to start recording.
The elapsed time is shown on the display.
Recording will take place on open space on disc. Data
will not be overwritten.
• You cannot change the channel or recording mode
during recording. You can change the channel or
recording mode while paused; however, the recording
will then be as a separate title.
• You can record while the unit is in standby for timer
recording, but once the time for the timer recording to
begin is reached, any recording taking place will stop
and the timer recording will begin.
g
h
q
DIRECT
NAVIGATOR
FUNCTIONS
e,r,w,q
ENTER
RETURN
STATUS
RAM
•
You can change the audio being received by
pressing [AUDIO] during recording. (This does not
affect the actual recording of the audio.)
AUDIO
* REC
REC MODE
n To pause recording
Press [h].
RAM -R -R DL -RW(V)
Press again to restart recording.
You can also press [* REC] to restart.
(Recorded title is not split into separate titles.)
• You can record up to 99 titles on one disc.
+R +R DL +RW
• You can record up to 49 titles on one disc.
n To stop recording
Press [g].
• From the start to the end of the recording is called one title.
See also the notes “Important notes for recording”
(Ô page 16).
-R -R DL -RW(V) +R +R DL +RW
•
Note
+RW
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
•
You can create a Top Menu using “Create Top Menu”
(Ô page 37). Recording or editing on the disc may delete
the menu. In that case, create the menu again.
n If a station also broadcasts Teletext information
RAM
•
It is not possible to record continuously from one side
The unit automatically records the programme name and
station name if the station’s “Title Page” is correctly set
(Ô page 42).
of a double sided disc to the other. You will need to eject the
disc and turn it over.
• The unit may take some time to retrieve titles (up to 30
minutes) and may fail in some cases.
Preparation
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Turn the unit on.
Quick Start
1 Sec. Quick Start for Recording on DVD-RAM
Recording on DVD-RAM starts about 1 second after first
pressing [8] on the main unit or [^ DVD] to turn on the unit
and then sequentially pressing [* REC].
1 Press [; OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
• Press the button again to close the tray.
• When using 8 cm DVD-RAM, or 8 cm DVD-R, remove
the disc from the cartridge.
Note
Startup takes more time when:
–you play a disc or start recording to discs other than DVD-
RAM.
g Cartridge disc
Insert label-up.
–the clock has not been set.
Insert label-up with
the arrow facing in.
Insert fully.
RQT8320
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To specify a time to stop
recording–One Touch Recording
To exit the screen without recording
Press [RETURN].
e.g., DVD-RAM
To stop recording partway
DVD-RAM
REC 7:59
BBC1
During recording
Press [g].
Remaining
time of
recording
Press [* REC] on the main unit to select the recording
time.
To show the remaining time
Press [STATUS].
• The unit’s display changes as shown below.
L R
OFF 0:30
OFF 1:00
OFF 1:30
OFF 4:00
OFF 2:00
OFF 3:00
Note
Counter (cancel)
When performing EXT LINK recording (Ô page 23), the
flexible recording function does not work.
• This does not work during timer recordings (Ô page 20) or
while using Flexible Recording (Ô below).
• If you change the channel or recording mode while
recording is paused, the time specified to stop recording is
cancelled.
Playing while you are recording
• The unit turns off automatically after the time to stop
recording is reached.
RAM
Playing from the beginning of the title you are
recording–Chasing playback
To cancel
Press [* REC] on the main unit several times until the
counter appears.
Press [q] (PLAY) during recording.
• There is no sound output while searching forward or
backward.
• The time to stop recording is cancelled; however, recording
continues.
To stop recording partway
Press [g].
To stop play
Press [g].
To stop recording
1 Press [g] to stop playing.
2 Press [g] (after 2 seconds).
Flexible Recording
(Recording that fits the remaining disc space)
RAM -R -R DL -RW(V) +R +R DL +RW
To stop timer recording
1 Press [g] to stop playing.
2 Press [g] (after 2 seconds).
3 Press [w,q] to select “Stop Recording” and press
[ENTER].
The unit sets the best possible picture quality that fits the
recording within the remaining disc space. The recording
mode becomes FR mode. Refer to “FR (Flexible Recording)”
(Ô page 17).
Preparation
Playing a title previously recorded while recording–
Simultaneous rec and play
• Select the channel or the external input to record.
1
While stopped
1 Press [DIRECT NAVIGATOR] during
recording.
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
2 Press [e,r,w,q] to select a title and
press [ENTER].
press [ENTER].
3 Press [e,r] to select “Flexible Rec”
To stop play
Press [g].
and press [ENTER].
Flexible Rec
To stop recording
Record in FR mode.
1 Press [g] to stop playing.
2 Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
Maximum rec. time
8 Hour 00 Min.
Maximum recording
time
This is the
Set rec. time
8 Hour 00 Min.
Start
Cancel
maximum recording
time in EP
( 8Hours ) mode.
To stop timer recording
SELECT
1 Press [g] to stop playing.
2 Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
RETURN
4 Press [w,q] to select “Stop Recording” and press
[ENTER].
4 Press [w,q] to select “Hour” and
“Min.” and press [e,r] to set the
recording time.
• You can also set the recording time with the
numbered buttons.
• You cannot record for more than 8 hours.
5
When you want to start recording
Press [e,r,w,q] to select “Start” and
press [ENTER].
Recording starts.
RQT8320
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
Using VIDEO Plus+ system to
make timer recordings
Entering VIDEO Plus+ number is an easy way of timer
recording. You can find these numbers in TV listings in
newspapers and magazines.
^ DVD
• You can enter up to 16 programmes up to a month in
advance.
• Using VIDEO Plus+ numbers for Satellite stations
Set this unit to recognise VIDEO Plus+ numbers for Satellite
stations before you start the following operations
(Ô page 13, Timer recording from satellite receiver with
VIDEO Plus+).
Numbered
buttons
VIDEO Plus+
1 Press [VIDEO Plus+].
VIDEO Plus+
Record
Remain
1:57 SP
7/
8:12:34
5
SUN
g
PROG/CHECK
Input PlusCode Number 0-9, and press ENTER.
e,r,w,q
ENTER
ENTER
RETURN
0
--
9
Number
2 Press the numbered buttons to enter
the VIDEO Plus+ number.
• To correct the number
Press [w] to move back to correct a digit.
A
3 Press [ENTER].
REC MODE
Timer
Remain
1:57 SP
Recording
8:14:56 7/
5
SUN
Name
BBC1
Date
SUN
Start
Stop
Mode
SP
7/
5
19:00
20:00
Programme Name
• Confirm the programme and make corrections if
necessary using [e,r,w,q] (Ô page 21, Manually
programming timer recordings, step 3).
• When “––––” appears in the “Name” column, you
cannot set timer recording. Press [e,r] to select
desired programme position. After you have entered
the information of a TV station, it is kept in the unit’s
memory.
• You can also press [REC MODE] to change the
recording mode.
• To enter programme name
Press [w,q] to select “Programme Name” and press
[ENTER] (Ô page 43).
RAM -R -R DL -RW(V) +R +R DL +RW
See also the notes “Important notes for recording”
(Ô page 16).
Preparation
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Check the time on the unit is correct.
• Insert a disc (Ô page 18).
4 Press [ENTER].
The settings are stored and the programme goes to
timer recording standby.
The timer icon is displayed in left column.
Timer
Recording
No. Name
Timer icon
01 BBC1
7
“z” lights on the unit’s display to indicate timer
recording standby has been activated.
Drive
No. Name
01 BBC1 7/
Date
Start
Stop Mode
20:00 SP
space
OK
5
SUN 19:00
When “!”
New Timer Programme
appears, make
sure the disc
has a sufficient
space.
Repeat steps 1–4 to programme other recordings.
n Notes on timer recording (Ô page 21)
To exit the timer recording list
Press [PROG/CHECK].
RQT8320
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel recording when
recording has already begun
Manually programming timer
recordings
You can enter up to 16 programmes up to a month in
advance.
(Each daily or weekly programme is counted as one
programme.)
1
When this unit is on
Press [g].
The confirmation screen appears.
2 Press [w,q] to select “Stop
1 Press [PROG/CHECK].
Recording” and press [ENTER].
Recording stops and the timer recording is cancelled.
(Daily and weekly timers remain and timer recording
will start as programmed.)
Timer
Recording
Remain
1:57 SP
8:17:23
7/
5
SUN
Drive
space
OK
No. Name
01 BBC1 7/
Date
Start
Stop Mode
20:00 SP
5
SUN 19:00
New Timer Programme
To release the programme from
recording standby
Press ENTER to store new programme.
ENTER
RETURN
2 Press [e,r] to select “New Timer
1 Press [PROG/CHECK].
Programme” and press [ENTER].
2 Press [e,r] to select the programme
3 Press [q] to move through the items
and press [A].
and change the items with [e,r].
The timer icon (Ô left) disappears.
• To put the programme on recording standby
again
Timer
Recording
Remain 1:57 SP
8:18:12 7/
5
SUN
Name
BBC1
Date
SUN
Start
Stop
Mode
SP
Perform step 2 again before the programme start time
to put the programme on recording standby. Timer
recording will work only if the timer icon is displayed.
7/
5
19:00
20:00
Programme Name
• Press and hold [e,r] to alter Start (Start time) and
Stop (Finish time) in 30-minute increments.
• You can also set Name (Programme position/TV
Station Name), Date, Start (Start time), and Stop
(Finish time) with the numbered buttons.
• You can also press [REC MODE] to change the
recording mode.
Notes on timer recording
• “z” flashes on the unit’s display for about 5 seconds when
the unit cannot go to timer recording standby (e.g., a
recordable disc is not in the disc tray).
• Timer recordings begin when the set time is reached even
when recording or when playing.
• Date
• If the unit is turned on when timer recording begins, it
remains turned on after recording finishes. It does not turn
off automatically. You can turn the unit off during timer
recording.
Date:
Current date up to one month later
minus one day
Daily timer: SUN-SAT → MON-SAT → MON-FRI
• If the unit is not put in the timer recording standby mode at
the last 10 minutes before the programmed timer recording
starting time, “z” flashes on the unit’s display. In this case,
insert a recordable disc to put the unit in the timer recording
standby mode.
• If you are making consecutive recordings that will start one
after the other, the beginning of the later programme cannot
be recorded.
Weekly timer:SUN → --- → SAT
• To enter programme name
Press [w,q] to select “Programme Name” and press
[ENTER] (Ô page 43).
4 Press [ENTER].
The settings are stored and the programme goes to
timer recording standby.
e.g., Programme1 10:00–11:00
The timer icon is displayed in left column.
Programme2 11:00–12:00
11:00
Timer
Recording
Programme1 Programme2
No. Name
01 BBC1
02 BBC1
7
7
Recorded
Recorded
Timer icon
Not recorded
“z” lights on the unit’s display to indicate timer
recording standby has been activated.
• If the actual broadcasting times of timer recordings overlap,
the recording that starts first always has priority, and the
recording of the later programme will start only after the first
timer recording has finished.
Drive
No. Name
01 BBC1 7/
02 BBC1 7/
Date
Start
Stop Mode
20:00 SP
22:30 SP
space
OK
5
SUN 19:00
SUN 22:00
5
OK
When “!”
New Timer Programme
appears, make
sure the disc
has a sufficient
space.
Repeat steps 2–4 to programme other recordings.
To exit the timer recording list
Press [PROG/CHECK].
RQT8320
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
Refer to the control reference on page 20.
Making timer recordings on the
television
(e.g., of digital broadcasts)
Check, change or delete a
programme
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
To make a timer recording with your television, connect to a
television with a Q Link function (Ô page 38) that you can
use for setting timer recordings using a fully wired 21-pin
Scart lead (Ô page 8–10).
Press [PROG/CHECK].
Icons
1 Make timer programming on the TV.
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another programme.
2 Press [^ DVD] to put the unit in
W
“standby” mode.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer programme starts
recording.
The start and end of recording is controlled by TV.
To stop recording
Press [g].
Note
F
The disc was full so the programme failed to record.
• When this unit is in EXT LINK standby (“EXT-L” on the unit’s
display), recording from TV does not start.
• Programmes are recorded as one title on this unit when the
end time of the earlier timer recording and the start time of
the later timer recording are close to each other.
The material was copy-protected so it was not recorded.
The programme did not complete recording because
the disc is dirty or some other reason.
X
Timer
Remain
1:57 SP
Recording
8:17:23
7/
5
SUN
Drive
space
OK
No. Name
01 BBC1 7/
Date
Start
Stop Mode
20:00 SP
RAM
To divide the titles, go to “Divide Title” (Ô page 31).
5
SUN 19:00
New Timer Programme
Press ENTER to store new programme.
ENTER
RETURN
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in the
remaining space.
→ (Date):For recordings made daily or weekly, the display
will show until when recordings can be made
(up to a maximum of one month from the
present time) based on the time remaining on
the disc.
!:
It may not be possible to record because:
• the disc is write-protected
• there is no more space left
• the number of possible titles has reached its
maximum.
n To change a programme
Press [e,r] to select the programme and press
[ENTER]. (Ô page 21, Manually programming timer
recordings, step 3)
n To delete a programme
Press [e,r] to select the programme and press [ ].
n To exit the timer recording list
Press [PROG/CHECK].
• Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
RQT8320
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from a satellite/digital terrestrial receiver
Linked timer recordings with
external equipment (SKY Digital
EXT LINK
CH
STB/digital terrestrial receiver)–
EXT LINK
DV IN
AV3
EXT LINK
g * REC
To record programmes from a SKY Digital STB/digital
terrestrial receiver using timer programming
INPUT
SELECT
Preparation
• Make sure you connect the AV2 input terminal of this unit to
“VCR Scart Terminal” of a SKY Digital STB/digital terrestrial
receiver with a 21-pin scart lead (Ô page 9).
• Set the “AV2 Input” and “Ext Link” to match the connected
equipment in the Setup menu (Ô page 41).
g
h
1 Make timer programming on SKY
Digital STB/digital terrestrial receiver.
2 Press [EXT LINK].
The unit turns off and “EXT-L” lights on the unit’s
display to indicate timer recording standby has been
activated.
* REC
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
REC MODE
EXT LINK
• In order to prevent accidental operation, press [EXT LINK]
to cancel the setting after recording is finished.
For your reference
• This function does not work with some equipment. Refer to
the equipment’s operating instructions.
• The beginnings of recordings may not be recorded correctly
in some cases.
• When “Ext Link” is set to “Ext Link 2”, this function does not
work if the input signal is NTSC system.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation
• Insert a disc (Ô page 18).
• When recording a bilingual programme (Ô page 16).
• Programmes are recorded as one title on this unit when the
end time of the earlier timer recording and the start time of
the later timer recording are close to each other.
Manual Recording
Preparation
RAM
To divide the titles, go to “Divide Title” (Ô page 31).
• Connect a satellite/digital terrestrial receiver to this unit’s
input terminals (Ô page 9).
• While the unit is in EXT LINK standby mode or recording,
video picture is from the AV2 input terminal irrespective of
“AV1 Output” setting.
• When the output signal from the external equipment is
NTSC, change the “TV System” to “NTSC” in the Setup
menu (Ô page 43).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to the AV2 input terminals,
select “AV2”.
2 Press [REC MODE] to select the
recording mode.
3 Select the channel on the other
equipment.
4 Press [* REC].
Recording starts.
To skip unwanted parts
Press [h] to pause recording. (Press again to restart
recording.)
To stop recording
Press [g].
RQT8320
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Selecting recorded programmes (titles) to play–
Direct Navigator
Simply select the recorded programmes (titles) you want to
play from the menu.
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
1 Press [DIRECT NAVIGATOR].
Numbered
DIRECT NAVIGATOR Title View
DVD-RAM
buttons
07
08
--
BBC1 7/
--
5
SUN
BBC1 7/
--
5
SUN
--
t,y
u,i
Previous
Next
Page
Select
02/02
g
h
q
ENTER
RETURN
SUB MENU
Previous
Nex
t
S
MANUAL
SKIP
e,r,w,q
ENTER
w h, h q
FUNCTIONS
2 Press [e,r,w,q] to select the title and press
[ENTER].
TIME SLIP
You can also select titles with the numbered buttons.
e.g., 5: [0] Ô [5] 15: [1] Ô [5]
DIRECT
NAVIGATOR
/Top Menu
To show other pages
Press [u] (Previous) or [i] (Next).
SUB MENU
AUDIO
RETURN
STATUS
To exit the screen
Press [DIRECT NAVIGATOR].
CREATE
CHAPTER
Direct Navigator screen icons
Currently recording.
Preparation
Title protected.
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Turn on this unit.
Title that was not recorded due to recording
protection (Digital broadcasts etc.)
Title cannot be played because data is
damaged.
1 Insert a disc (Ô page 18).
Title with “One time only recording” restriction
2 Press [q] (PLAY).
Title recorded using a different encoding system
from that of the TV system currently selected on
the unit.
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Play starts from the most recently recorded
title.
(NTSC)
(PAL)
DVD-V DVD-A CD VCD
and MP3
Note
Play starts from the beginning of the disc.
RAM -R -R DL -RW(V) +R +R DL +RW
•
The unit stops
playing a disc when timer recording starts.
n When a menu screen appears on the television
DVD-V DVD-A
Press [e,r,w,q] to select the item and press [ENTER].
Some items can also be selected using the numbered
buttons.
RAM
•
Press [q] (PLAY) when you wish to start playing the
disc while recording (Ô page 19, “Chasing playback”).
Changing audio during play
VCD
Press [AUDIO].
Press the numbered buttons to select the item.
e.g., 5: [0] Ô [5] 15: [1] Ô [5]
RAM -RW(VR) VCD
DVD-RAM
PLAY
LR
L
R
• To return to the menu screen
Press [DIRECT NAVIGATOR] or [SUB MENU].
DVD-V
Press [DIRECT NAVIGATOR].
Press [RETURN].
DVD-A
L R
e.g., “L R” is selected
VCD
• The playing method may differ from the one described
above depending on disc types. Read the disc’s
instructions carefully.
DVD-V DVD-A
You can change the audio channel number each time you
press the button. This allows you to change things like the
soundtrack language.
1 ENG
Digital 3/2.1ch
Soundtrack
DVD-V
e.g.,
English is the selected language (Ô page 28,
Soundtrack).
RQT8320
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations during play
Press [g].
The stopped position is memorized.
Resume play function
Press [q] (PLAY) to restart from this position.
The stopped position is cleared when:
–you press [g] several times.
–you open the tray.
Stop
DVD-A CD VCD
–
and MP3
you turn the unit off.
Press [h].
Press again or press [q] (PLAY) to restart play.
Pause
Press [t] or [y].
+R +R DL +RW
• The speed increases up to 5 steps (
• Press [q] (PLAY) to restart play.
up to 3 steps).
Search
• Audio is heard during first level search forward.
DVD-A
CD
(excluding motion picture parts)
Audio is heard during all levels of search.
and MP3
• Depending on the disc, searching may not be possible.
During play or while paused, press [u] or [i].
The unit will skip titles, chapters, or tracks according to the number of times the button is
pressed and play will begin.
Skip
Press the numbered buttons.
Play starts from the selected title, chapter or track.
MP3/JPEG
e.g., 5: [0] Ô [0] Ô [0] Ô [5]
15: [0] Ô [0] Ô [1] Ô [5]
Other discs (You can select a track
with DVD-Audio.)
DVD-A
Selecting groups
While stopped (screen saver is
displayed on the television Ô right)
e.g., 5: [5]
Starting from a
selected title
e.g., 5: [0] Ô [5]
15: [1] Ô [5]
• This works only when stopped (screen saver is displayed on the television Ô above) with
some discs.
VCD
•
(with playback control)
If you press the numbered buttons while stopped (the above screen saver is displayed on
the television) you can cancel PBC. (Elapsed play time appears on the unit’s display.)
Press and hold [q] (PLAY/x1.3).
Play speed is quicker than normal.
• Press again to return to normal speed.
RAM
Quick View
While paused, press [t] or [y].
• The speed increases up to 5 steps.
• Press [q] (PLAY) to restart play.
VCD
Slow-motion
RAM -R -R DL -RW(V) +R +R DL
+RW DVD-V
•
Forward direction [y] only.
DVD-A
(Motion picture parts only)
• The unit will pause if slow-motion play is continued for approximately 5 minutes
-RW(VR) VCD
DVD-V DVD-A VCD
(excluding
).
While paused, press [w h] or [h q].
Frame-by-frame
RAM -R -R DL -RW(V) +R +R DL
+RW DVD-V
• Each press shows the next frame.
• Press and hold to change in succession forward or backward.
• Press [q] (PLAY) to restart play.
VCD
DVD-A
(Motion picture parts only)
•
Forward direction [h q] only.
-RW(VR) VCD
1 Press [TIME SLIP].
2 Press [e,r] to select the time and press [ENTER].
Play skips the specified time.
• Each time you press [e,r], the time increases [e] or decreases [r] by 1 minute intervals.
(Press and hold for 10-minute intervals.)
Skipping the specified
time (Time Slip)
RAM -R -R DL -RW(V) +R +R DL
+RW -RW(VR)
Press [MANUAL SKIP].
Play restarts from approximately 30 seconds later.
Manual Skip
RAM -R -R DL -RW(V) +R +R DL
+RW -RW(VR)
Press [CREATE CHAPTER].
RAM
Create Chapter
Chapters are divided at the point pressed.
• Press [u,i] to skip to the start of a chapter.
• You cannot create chapters when the unit is in EXT LINK standby.
(Ô page 30, Title/Chapter)
Excluding MP3/JPEG
RQT8320
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus to play MP3 and still pictures (JPEG/TIFF)
Refer to the control reference on page 24.
Regarding MP3 and still pictures (JPEG/TIFF)
• Compatible formats: ISO9660 level 1 or 2 (except for
Playing MP3
extended formats) and Joliet
• Maximum number of files (tracks) and folders (groups)
recognizable: 3000 files 1 (tracks) and 300 (including the
root folder) folders (groups)
Total number of recognizable file including MP3, JPEG
and other type of files is 4000.
• This unit is compatible with multi-session but reading or
play of the disc may take time if there are a lot of sessions.
• Operation may take time to complete when there are
many files (tracks) and/or folders (groups) and some may
not display nor be playable.
You can play CD-R/RW and DVD-R discs which contain MP3
files that have been recorded on a computer.
1
The screen shown at right is
displayed when you insert a disc
containing MP3 files and still
Play mode is set to MP3.
To play another type of file,
select the file type
from Menu in FUNCTIONS.
pictures (JPEG/TIFF).
Press [ENTER], and follow the
steps below.
ENTER
RETURN
• English alphabet and Arabic numerals are displayed
correctly. Other characters may not be displayed correctly.
• The display order on this unit may differ from how the
order is displayed on a computer.
• Depending on how you create the disc (writing software),
files (tracks) and folders (groups) may not play in the order
you numbered them.
• This unit is not compatible with packet-write format.
• Depending on the recording, some items may not be
playable.
Regarding MP3
• File format: MP3
Files must have the extension “.mp3” or “.MP3”.
• Bit rates: 32 kbps to 320 kbps
1 Press [DIRECT NAVIGATOR].
G:Group no.
T: Track no. in the group
TOTAL: Track no./Total track no. in all groups
No.
1
Total
1
2
3
4
5
6
7
Group
Menu
:
101
Selected group
G
T
1
1
Track
Tree
001-Baby
002-Simple
003-Aganju
004-Around
005-River
006-Every
007-Cada
008-O
TOTAL
1/ 91
Number
0
--
9
Prev.
Next
8
9
SELECT
009-Winter
10
010-Distante
ENTER
RETURN
Page 001/019
• Sampling frequency: 16 kHz/22.05 kHz/24 kHz/32 kHz/
44.1 kHz/48 kHz
• This unit is not compatible with ID3 tags.
• If there is a large amount of still picture data etc. within a
MP3 file, play may not be possible.
Regarding still pictures (JPEG/TIFF)
• File format: JPEG, TIFF (non-compressed RGB chunky
format)
Files must have the extension “.jpg”, “.JPG”, “.tif” and
“.TIF”.
• Files are treated as tracks and folders are treated as
groups.
2 Press [e,r] to select the track and
press [ENTER].
Play starts on the selected track.
• “ ” indicates the track currently playing.
• You can also select the track with the numbered
buttons.
e.g., 5:
[0] Ô [0] Ô [0] Ô [5]
• Number of pixels: 34 x 34 to 6144 x 4096
(Sub sampling is 4:2:2 or 4:2:0)
15: [0] Ô [0] Ô [1] Ô [5]
• Operation may take time to complete when playing TIFF
format still pictures.
• MOTION JPEG is not supported.
To show other pages
Press [u] (Previous) or [i] (Next).
n To select other group
1 Press [q].
• You can play MP3 and still pictures (JPEG/TIFF) on this
unit by making folders as shown below. However
G: Selected group no. /Total group no.
If the group has no track, “– –” is
displayed as group number.
depending on how you create the disc (writing software),
play may not be in the order you numbered the folders.
Structure of MP3 folders
Prefix with 3-digit numbers
in the order you want to
play them.
Structure of still pictures
(JPEG/TIFF)
Files inside a folder are
displayed in the order they
were updated or taken.
2
Tree
Menu
G
7/25
G
T
1
1
MP3 music
001 My favorite
TOTAL
001 Brazilian pops
1/ 91
002 Chinese pops
003 Czech pops
004 Hungarian pops
Number
005 Liner notes
0
--
9
Groups that
contain no
compatible files.
006 Japanese pops
tree
tree
007 Mexican pops
P0000001.jpg
P0000002.jpg
008 Philippine pops
009 Swedish pops
SELECT
001Group
002 Folder
001 Momoko
002 Standard number
ENTER
001 Piano solo
RETURN
002 Vocal
001track.mp3
P0000003.jpg
002track.mp3
P0000004.jpg
Order of
play
Order of
play
003track.mp3
P0000005.jpg
2 Press [e,r] to select a group and press
[ENTER].
002Group
003 Folder
003Group
004 Folder
001track.mp3
P0000006.jpg
002track.mp3
003track.mp3
004track.mp3
P0000007.jpg
P0000008.jpg
P0000009.jpg
The file list for the group appears.
001track.mp3
002track.mp3
003track.mp3
P0000010.jpg
P0000011.jpg
P0000012.jpg
To stop playing
Press [g].
2
When the highest level folders are “DCIM” folders, they
are displayed first on the tree.
To return to the previous screen
Press [RETURN].
To switch to JPEG menu
(Ô page 27, “To select JPEG Menu”)
To exit the screen
Press [DIRECT NAVIGATOR].
RQT8320
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures (JPEG/TIFF)
You can play CD-R/RW and DVD-R discs which contain still
pictures (JPEG/TIFF) that have been recorded on a computer.
Useful functions during still
picture play
You can display still pictures one by one
with constant interval.
The screen shown at right is
Play mode is set to MP3.
displayed when you insert a disc
containing MP3 files and still
pictures (JPEG/TIFF).
Press [ENTER], and follow the
steps below.
To play another type of file,
select the file type
While the JPEG Menu is displayed
1 Press [e,r,w,q] to select
“Folder” and press
from Menu in FUNCTIONS.
ENTER
RETURN
[SUB MENU].
JPEG Menu
CD(JPEG)
Picture (JPEG) View
n To select JPEG Menu
image001
Folder
Menu
1 Press [FUNCTIONS].
2 Press [e,r] to select “Menu”
and press [ENTER].
0001
0005
0002
0006
0003
0007
0004
0008
Select file type.
Start Slide
Show
MP3
3 Press [e,r] to select “JPEG”
JPEG
ENTER
2 Press [e,r] to
and press [ENTER].
Ô below, step 2
Start Slide Show
Slide Interval
RETURN
select “Start Slide
Show” and press
[ENTER].
Slide Interval
1 Press [DIRECT NAVIGATOR].
JPEG Menu
CD(JPEG)
Picture (JPEG) View
To change the slide
interval
1 In step 2 above, press [e,r] to
select “Slide Interval” and press
[ENTER].
image001
Folder
0001
0005
0009
0002
0003
0004
0006
----
0007
----
0008
----
2 Press [w,q] to select the slide
interval and press [ENTER].
• You can select a slide interval
between 0-30 seconds.
Previous
ENTER
RETURN
Next
Page 001/001
2 Press [e,r,w,q] to select the still
While playing
picture and press [ENTER].
• The selected still picture is displayed on the screen.
• You can also select still pictures with the numbered
buttons.
1 Press [SUB MENU].
Rotate RIGHT
2 Press [e,r] to
select “Rotate
RIGHT” or “Rotate
LEFT” and press
[ENTER].
Rotate LEFT
ENTER
RETURN
e.g., 5:
[0] Ô [0] Ô [0] Ô [5]
15: [0] Ô [0] Ô [1] Ô [5]
Rotate
To show other pages
Press [u] (Previous) or [i] (Next).
To return the rotated picture to its
original position
Press [e,r] to select the opposite
rotation in step 2 and press [ENTER].
• Rotation information will not be stored.
n To select another folder
While the JPEG Menu is displayed
1 Press [e,r,w,q] to select “Folder” and
press [ENTER].
While playing
F: Selected folder no./Total folder no.
1 Press [SUB MENU].
Rotate RIGHT
2 Press [e,r] to
JPEG Menu
CD(JPEG)
Folder
Rotate LEFT
select “Zoom in”
and press [ENTER].
F
1/ 21
Zoom in
12 02
2
0
04
image001
image002
image003
ENTER
RETURN
image004
image005
image006
To return the picture to
its original size
Press [e,r] to select “Zoom out” in
step 2 and press [ENTER].
• When zooming in, the picture may be
cut off.
image007
image008
image009
image010
Data
Zoom in
Zoom out
Folders that
contain no
compatible files.
ENTER
RETURN
2 Press [e,r] to select the folder and press
• The enlargement information will not
be stored.
[ENTER].
• The “Zoom in/Zoom out” function is
only available for still pictures smaller
than 640 x 480 pixels.
To display the previous or next still picture during play
Press [w,q].
While playing
Press [STATUS] twice.
To stop playing
Press [g].
• The unit remembers the still picture where you stopped
play. This is cleared when you turn the unit off or remove
the disc.
12:03:00 7/5
Date
26/11/2004
No.
2/ 30
Properties
To return to the previous screen
Shooting date
To exit the picture properties screen
Press [STATUS] again.
Press [RETURN].
To switch to MP3 menu
Select “MP3” in step 3 of “To select JPEG Menu” (Ô above).
To exit the screen
Press [DIRECT NAVIGATOR].
RQT8320
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using on-screen menus/FUNCTIONS window and Status message
RAM -RW(VR) VCD
Audio channel
Ô page 24, Changing audio during play
DVD-V DVD-A
Angle
Change the number to select an angle.
FUNCTIONS
DVD-A
STILL-P (Still picture)
Selects the play method for still pictures.
Slide Show:Plays according to the default order on the
disc.
e,r,w,q
ENTER
RETURN
STATUS
Page:
• RANDOM: Plays in random order.
• Return: Returns to the default still picture on the
disc.
Select the still picture number and play.
DISPLAY
VCD
PBC (Playback control Ô page 49)
Indicates whether menu play (playback control) is on or
off. (unchangeable)
Using on-screen menus
With some discs, you may only be able to make changes
using the menus (Ô page 24) on the disc.
• The display changes according to the disc content. You
cannot change when there is no recording.
Common procedures
1 Press [DISPLAY].
Audio attribute
LPCM/PPCM/%Digital/DTS/MPEG: Signal type
Disc
Play
Picture
Sound
Other
Digital 2/0 ch
1
Soundtrack
Subtitle
Off
ch (channel):
k (kHz):
b (bit):
Number of channels
Sampling frequency
Number of bits
L R
Audio channel
Language
Menu
Item
Setting
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
DAN: Danish
THA: Thai
• Depending on the condition of the unit (playing,
stopped, etc.) and disc contents, there are some
items that you cannot select or change.
POR: Portuguese POL: Polish
RUS: Russian CES: Czech
JPN: Japanese SLK: Slovak
CHI: Chinese
KOR: Korean
MAL: Malay
2 Press [e,r] to select the menu and
HUN: Hungarian
FIN: Finnish
press [q].
:
Others
3 Press [e,r] to select the item and
NOR: Norwegian VIE: Vietnamese
press [q].
• Enter a code (Ô page 50) when you select “ : Others”.
4 Press [e,r] to select the setting.
Play menu–Change the play sequence
• Some items can be changed by pressing [ENTER].
This function works only when the elapsed play time is
displayed.
Select the item for repeat play. Depending on the disc, the
items that can be selected will differ.
To clear the on-screen menus
Press [DISPLAY].
Disc menu–Setting the disc content
Repeat Play
DVD-V DVD-A
Soundtrack
CD VCD
• All
• Chapter
Select the audio and language (Ô right, Audio attribute,
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
Language).
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
The disc’s audio attributes appear.
DVD-A
• Group
• PL (Playlist)
• Title
and MP3
RAM -RW(VR)
VCD
(SVCD)
Select the soundtrack number (1-2).
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
DVD-V DVD-A
Subtitle
DVD-A CD VCD
• Track
and MP3
Turn the subtitle on/off and select the language (Ô right,
Language).
Select “Off” to cancel.
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
(Only
discs that contain subtitle on/off information)
• Subtitle on/off information cannot be recorded using
this unit.
VCD
(SVCD)
Turn the subtitle on/off and select the subtitle number (1-
4).
RQT8320
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu–Change the picture quality
Playback NR
FUNCTIONS window
By using the FUNCTIONS window you may access the main
functions quickly and easily.
Reduces noise and picture degradation.
On ↔ Off
1
While stopped
Progressive (Ô page 49)
Press [FUNCTIONS].
Select “On” to enable progressive output.
Select “Off” if the picture is stretched horizontally.
Functions displayed depend on the type of disc.
FUNCTIONS
Cartridge Protection Off
Disc Protection Off
Transfer [When “Progressive” (Ô above) is set to “On”]
DVD-RAM
Playback
Select the method of conversion for progressive output
to suit the type of title being played (Ô page 49, Film and
video).
Recording
Delete
To Others
When the output signal is PAL
ENTER
RETURN
• Auto:
Automatically detects the film and video
content, and appropriately converts it.
• Video: Select when using “Auto”, and the video
content is distorted.
2 Press [e,r] to select an item and
• Film:
Select this if the edges of the
film content appear jagged or
rough when “Auto” is selected.
However, if the video content is
distorted as shown in the
press [ENTER].
• If you select “To Others” and press [ENTER], the
following screen appears. Press [e,r] to select an
item and press [ENTER].
illustration to the right, then select “Auto”.
• When the tray is opened, the setting will return to
“Auto”.
FUNCTIONS
Cartridge Protection Off
DVD-RAM
Playback
Disc Protection Off
VIDEO Plus
+
Record
Recording
Delete
Playlists
Flexible Rec
DV Auto Rec
When the output signal is NTSC
• Auto 1 (normal):
Setup
To Others
DVD Management
Automatically detects the film and video
content, and appropriately converts it.
• Auto 2: In addition to “Auto 1”, automatically detects
film contents with different frame rates and
appropriately converts it.
ENTER
RETURN
• If you press [RETURN], you can return to the
previous screen.
• Video: Select when using “Auto 1” and “Auto 2”, and
the video content is distorted.
To exit the FUNCTIONS window
AV-in NR (Only when AV1, AV2, AV3 or DV is selected)
Press [FUNCTIONS].
Reduces video tape noise while dubbing.
• Automatic:Noise reduction only works on picture input
from a video tape.
Status message
• On:
• Off:
Noise reduction works for any input video.
Noise reduction is off. You can record the
input signal as it is.
Status messages appear on the television during operation
to show the condition of the unit.
Press [STATUS].
Only when you have set “Progressive” to “On” in the Setup
menu (Ô page 40).
The display changes each time you press the button.
Type of disc
The remaining time appears here
Sound menu–Change the sound effect
DVD-RAM
while stopped.
REC
PLAY
NICAM
L R
V.S.S.
Recording or play status/input channel
RAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A
TV audio type being received
(NICAM or MONO)
Selected audio type
-RW(VR)
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front
speakers only.
• Turn V.S.S. off if it causes distortion. (Check the
surround function on the connected equipment.)
• V.S.S. does not work for bilingual recordings.
Available recording time and
recording mode
Date and time
g
Remain
12:34:50 7/5
1:45 SP
g
g
T12 0:12.34 SP
T12 0:01.23 SP
Dialog Enhancer
RAM -R -R DL -RW(V) +R +R DL +RW DVD-V DVD-A
-RW(VR)
Title number and elapsed
time during recording/
Recording mode
Title number and
elapsed time during
play/Recording mode
(Dolby Digital, 3-channel or over only, including a center
channel)
The volume of the center channel is raised to make
dialog easier to hear.
No display
Other menu–Change the display position
Position
1 - 5: The higher the setting the lower the on-screen menu
moves.
RQT8320
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing titles/chapters
Editing titles/chapters and playing
chapters
1
During play or while stopped
Press [DIRECT NAVIGATOR].
u,i
2 Press [e,r,w,q] to select the title.
DIRECT NAVIGATOR Title View
DVD-RAM
q
07
08
--
h
BBC1 7/
--
5
SUN
BBC1 7/
--
5
SUN
--
e,r,w,q
ENTER
DIRECT
NAVIGATOR
Previous
Next
Page
Select
02/02
ENTER
RETURN
SUB MENU
Previous
Nex
t
S
To show other pages
Press [u] (Previous) or [i] (Next).
Multiple editing
SUB MENU
RETURN
Select with [e,r,w,q] and press [h]. (Repeat.)
• A check mark appears. Press [h] again to cancel.
3 Press [SUB MENU], then press [e,r]
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
to select the operation and press
Title/Chapter
[ENTER].
Programmes are recorded as a single title consisting of one
• If you select “Edit”, press [e,r] to select the operation
and press [ENTER].
chapter.
Title
Enter Name
Chapter
Set up Protection
Cancel Protection
Start
End
Refer to “Title
operations”
(Ô page 31).
Partial Delete
Change Thumbnail
Divide Title
Delete
Properties
Edit
RAM
You can divide a title into multiple chapters.
(Ô page 25, 31, “Create Chapter”)
Chapter View
Title
If you select “Chapter View” (Ô step 4)
Chapter
Chapter
Chapter
Chapter
4 Press [e,r,w,q] to select the chapter.
To start play Ô Press [ENTER].
To edit Ô Step 5.
RAM
You can change the order of chapters and create a
playlist (Ô page 32).
DIRECT NAVIGATOR Chapter View
DVD-RAM
08 BBC1 7/
5
SUN
---
001
---
---
---
---
---
-R -R DL -RW(V) +R +R DL
+R +R DL
•
Titles are divided into about 5-
8-minute) chapters after finalizing
0:00.15
---
---
---
minute (
(Ô page 37).
---
---
Previous
Next
Page
01/01
• The maximum number of items on a disc:
–Titles:
–Chapters: Approximately 1000
ENTER
RETURN
SUB MENU
Select
S
+R +R DL +RW
99 (
49 titles)
• To show other pages/Multiple editing (Ô above)
+R +R DL +RW
(
Approximately 254)
5 Press [SUB MENU], then press [e,r]
(Depends on the state of recording.)
to select the operation and press
[ENTER].
Delete Chapter
Note
• Once deleted or partially deleted, title/chapters cannot be
restored to their original state. Make certain before
Create Chapter
proceeding.
Refer to “Chapter operations”
Combine Chapters
• You cannot edit during recording.
(Ô page 31).
+RW
•
You can create a Top Menu using “Create Top Menu”
(Ô page 37). Recording or editing on the disc may delete
the menu. In that case, create the menu again.
Title View
• You can go back to the Title View.
+R +R DL
•
Management information is recorded in unused
sections when you edit discs. The available space on these
discs decreases each time you edit their contents.
To exit the screen
Press [DIRECT NAVIGATOR].
Preparation
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Turn the unit on.
To return to the previous screen
Press [RETURN].
• Insert the disc with the title to edit (Ô page 18).
RAM
•
Release protection (Ô page 36).
RQT8320
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Title operations
After performing steps 1–3 (Ô page 30)
Press [w,q] to select “Delete” and press [ENTER].
• Once deleted, the recorded contents are lost and cannot be restored.
Delete
Make certain before proceeding.
RAM -R -R DL -RW(V)
-R -R DL +R +R DL
•
•
The available recording time on a disc does not increase when you delete titles.
+R +R DL +RW
-RW(V) +RW
Available recording space on a disc increases only when the last recorded title is
deleted. It does not increase if other titles are deleted.
Information (e.g., time and date) is shown.
• Press [ENTER] to exit the screen.
Properties
Properties
RAM -R -R DL -RW(V)
Dinosaur
No.
Date 7/ 5/ 2006 SUN Rec time 0:30 (SP)
Name
01
Time
12:19
4
+R +R DL +RW -RW(VR)
ENTER
RETURN
You can give names to recorded titles.
Ô page 43, Entering text
Enter Name
RAM -R -R DL -RW(V)
+R +R DL +RW
If set, this will protect the title from accidental deletion.
DIRECT NAVIGATOR Title View
DVD-RAM
Set up Protection
Cancel Protection
RAM +R +R DL +RW
Press [w,q] to select “Yes” and press [ENTER].
The lock symbol appears when the title is protected.
07
08
BBC1 7/
--
5
SUN
BBC1 7/
--
5
SUN
You can remove unnecessary part of the recording.
1 Press [ENTER] at the start point and end point of the
section you want to delete.
2 Press [e,r] to select “Exit” and press [ENTER].
• Select “Next” and press [ENTER] to delete other sections.
3 Press [w,q] to select “Delete” and press [ENTER].
DIRECT NAVIGATOR Partial Delete
DVD-RAM
08
PLAY
Start
Partial Delete
End
Next
RAM
Exit
(Ô below, “For your
reference”)
0:00.02
Start
--:--.--
End
--:--
.
-
-
ENTER
RETURN
You can change the image to be shown as a thumbnail picture in the
Title View.
DIRECT NAVIGATOR Change Thumbnail
DVD-RAM
08
1 Press [q] (PLAY) to start play.
Change
Change Thumbnail
RAM -R -R DL -RW(V)
2 Press [ENTER] when the image you want to use as a
Exit
thumbnail is shown.
To change the thumbnail
Restart play and press [e,r] to select “Change”, then press
[ENTER] at the point you want to use as the thumbnail.
3 Press [e,r] to select “Exit” and press [ENTER].
0:00.01
+R +R DL +RW
(Ô below, “For your
reference”)
Change
0:00.01
Start play and select the image
of thumbnail.
a
ENTER
RETURN
You can divide a title into two.
DIRECT NAVIGATOR Divide Title
DVD-RAM
1 Press [ENTER] at the point you want to divide the title.
2 Press [e,r] to select “Exit” and press [ENTER].
3 Press [w,q] to select “Divide” and press [ENTER].
08
PLAY
Preview
Divide
Exit
0:00.00
To confirm the division point
Divide Title
RAM
(Ô below, “For your
reference”)
Divide
--:--.--
Press [e,r] to select “Preview” and press [ENTER]. (The unit plays
10 seconds before and after the division point.)
To change the division point
ENTER
RETURN
Restart play and press [e,r] to select “Divide”, then press [ENTER] at the point you want to divide.
Note
• The divided titles retain the name and CPRM property (Ô page 49) of the original title.
• Video and audio just before and after the dividing point may momentarily be cut out. Carry out the
title division after checking it with “Preview” (Ô above).
Multiple editing is possible.
Chapter operations
After performing steps 1–5 (Ô page 30)
Press [w,q] to select “Delete” and press [ENTER].
Delete Chapter
RAM
• Once deleted, the recorded contents are lost and cannot be restored.
Make certain before proceeding.
Select the point where you want to start a new chapter while viewing
the title.
DIRECT NAVIGATOR Create Chapter
DVD-RAM
Create Chapter
08
PLAY
Create
1 Press [ENTER] at the point you want to divide.
• Repeat this step to divide at other points.
2 Press [e,r] to select “Exit” and press [ENTER].
RAM
(Ô below, “For your
reference”)
Exit
0:00.01
Press [w,q] to select “Combine” and press [ENTER].
• The selected chapter and next chapter are combined.
Combine Chapters
RAM
Multiple editing is possible.
For your reference
RQT8320
• Use search or Time Slip (Ô page 25) to find the desired point.
31
• To skip to the start or end of a title, press [u] (start) or [i] (end).
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating, editing and playing playlists
3 Press [e,r] to select “Playlists” and
press [ENTER].
4 Press [e,r,w,q] to select “Create”
and press [ENTER].
Playlists
DVD-RAM
Playlist View
--
--
--
--
Create
--
--
Previous
Next
Page
01/01
ENTER
RETURN
e,r,w,q
FUNCTIONS
RETURN
5 Press [w,q] to select the source title
ENTER
and press [r].
• Press [ENTER] to select all the chapters in the title,
then skip to step 7.
SUB MENU
Playlists
Create
DVD-RAM
08 BBC1 7/
5
SUN
Source Title
01
Page
01/01
--
--
02
Source Chapter
001
Page 001/001
Page 001/001
---
---
002
---
003
---
Chapters in Playlist
---
You can arrange the chapters (Ô page 30) to create a
playlist.
ENTER
S
SUB MENU
Press RETURN to exit.
RETURN
Title
Title
6 Press [w,q] to select the chapter you
Chapter Chapter Chapter Chapter Chapter
want to add to a playlist and press
[ENTER].
• Press [e] to cancel.
Playlists
Create
DVD-RAM
Playlist Chapter Chapter
08 BBC1 7/
Source Title
01
5
SUN
Page
01/01
--
--
02
• Editing playlists doesn’t modify the recorded data.
Playlists are not recorded separately so this doesn’t use
much capacity.
Source Chapter
001
Page 001/001
Page 001/001
---
---
002
---
003
---
Chapters in Playlist
---
• You cannot create or edit a playlist while recording.
ENTER
S
SUB MENU
Press RETURN to exit.
RETURN
RAM
• You can also create a new chapter from the source
title.
Press [SUB MENU] to select “Create Chapter” and
press [ENTER] (Ô page 31, “Create Chapter”).
• The maximum number of items on a disc:
–Playlists:
–Chapters in playlists:Approximately 1000
(Depends on the state of recording.)
99
7 Press [w,q] to select the position to
• If you exceed the maximum numbers of items for a disc, all
the items entered will not be recorded.
insert the chapter and press [ENTER].
Playlists
Create
DVD-RAM
Preparation
08 BBC1 7/
Source Title
01
5
SUN
Page
01/01
--
--
02
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Turn the unit on.
Source Chapter
001
Page 001/001
Page 001/001
---
---
002
---
003
---
Chapters in Playlist
---
• Insert the disc with the title to edit (Ô page 18).
• Release disc or cartridge protection (Ô page 36).
ENTER
Press RETURN to exit.
RETURN
• Press [e] to select other source titles.
• Repeat steps 5–7 to add other chapters.
Creating playlists
8 Press [RETURN].
To exit the screen
Press [RETURN] several times.
1
While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
To return to the previous screen
Press [RETURN].
press [ENTER].
FUNCTIONS
Cartridge Protection Off
Disc Protection Off
DVD-RAM
Playback
VIDEO Plus
+
Record
Recording
Delete
Playlists
Flexible Rec
DV Auto Rec
Setup
DVD Management
To Others
ENTER
RETURN
RQT8320
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing and playing playlists/
chapters
Playlist operations
After performing steps 1–5 (Ô left)
Press [w,q] to select “Delete” and
RAM
press [ENTER].
-RW(VR)
(play only)
Delete
RAM
Once deleted, the playlists are lost and
cannot be restored.
1
While stopped
Make certain before proceeding.
Press [FUNCTIONS].
Playlist information (e.g., time and date)
is shown.
2 Press [e,r] to select “To Others” and
• Press [ENTER] to exit the screen.
press [ENTER].
Properties
RAM -RW(VR)
Properties
Dinosaur
3 Press [e,r] to select “Playlists” and
No.
01
Date 7/5/2006 WED
Total 0:30.05
Chapters
012
press [ENTER].
ENTER
RETURN
4 Press [e,r,w,q] to select the playlist.
Ô page 32, Creating playlists, steps 5–8
RAM
Create
To start play Ô Press [ENTER].
Press [w,q] to select “Copy” and
press [ENTER].
• The copied playlist becomes the newest
one in the playlist view screen.
To edit Ô Step 5.
Playlists
DVD-RAM
Playlist View
Copy
RAM
01
--
--
--
7/
--
5
SUN 0:30
Create
--
Ô page 43, Entering text
Enter Name
RAM
Previous
Next
Page
01/01
Ô page 31, Change Thumbnail
ENTER
Change
Thumbnail
RAM
SUB MENU
Select
S
RETURN
• To show other pages/Multiple editing (Ô page 30)
5 Press [SUB MENU], then press [e,r]
to select the operation and press
Multiple editing is possible.
[ENTER].
Chapter operations
• If you select “Edit”, press [e,r] to select the operation
and press [ENTER].
RAM
After performing steps 1–7 (Ô left)
• Editing chapters in a playlist does not modify the source
titles and source chapters.
Create
Copy
Refer to
“Playlist
operations”
(Ô right).
Enter Name
Delete
Change Thumbnail
Properties
Ô page 32, Creating playlists, steps 5–8
Add
Edit
Chapter
Chapter View
Press [e,r,w,q] to select the position
to insert the chapter and press
[ENTER].
If you select “Chapter View” (Ô step 6)
6 Press [e,r,w,q] to select the chapter.
Playlists
DVD-RAM
Move Chapter
01
7/ 5 SUN 0:30
Move
Chapter
To start play Ô Press [ENTER].
001
---
002
---
---
---
---
---
0:00.15
0:00.24
To edit Ô Step 7.
---
Playlists
DVD-RAM
Chapter View
---
---
---
01
7/ 5 SUN 0:30
001
---
002
---
---
---
---
---
Previous
Next
Page
01/01
ENTER
0:00.15
0:00.24
RETURN
---
---
---
---
Ô page 31, Create Chapter
Create
Chapter
Previous
Next
Page
01/01
ENTER
SUB MENU
Select
S
RETURN
Ô page 31, Combine Chapters
Combine
Chapters
• To show other pages/Multiple editing (Ô page 30)
7 Press [SUB MENU], then press [e,r]
Ô page 31, Delete Chapter
The playlist itself is deleted if you delete
all the chapters in it.
Delete
Chapter
to select the operation and press
[ENTER].
Add Chapter
Multiple editing is possible.
Move Chapter
Refer to “Chapter operations”
Create Chapter
(Ô right).
Combine Chapters
Delete Chapter
Playlist View
• You can go back to the Playlist View.
To exit the screen
Press [RETURN] several times.
RQT8320
To return to the previous screen
Press [RETURN].
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying from a video cassette recorder
Refer to the control reference on page 35.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish
DV automatic recording.
e.g., Connecting other video equipment to the AV3 or
DV IN terminals
You can also connect to the AV2 input terminal on the
rear.
• Turn off the unit and other video equipment before
connecting.
To stop recording
Press [g]. The confirmation screen appears. Press [ENTER].
Note
• Only one piece of DV equipment (e.g., digital video
camcorder) can be connected to the unit via the DV IN
terminal.
EXT LINK
CH
This unit
DV IN
AV3
• It is not possible to operate the unit from the connected DV
equipment.
• The DV IN terminal on this unit is for use with DV equipment
only. (It cannot be connected to a computer, etc.)
• The DV equipment name may not be shown correctly.
• Depending on the DV equipment, the images or audio may
not be input properly.
Yellow White Red
or
• The date and time information on the tape of the DV
equipment will not be recorded.
• You cannot record and play simultaneously.
DV cable
(IEEE 1394,
4-pin)
SVideo Audio/video
cable
cable
If the DV automatic recording function does not work
properly, check the connections and DV equipment
settings, and turn the unit off and back on.
If that does not work, follow the instructions for manual
recording (Ô below).
Other video equipment
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
The S VIDEO terminal achieves a more vivid picture than
the VIDEO terminal.
Manual recording
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation
• Turn on the unit and connected equipment.
• Insert a disc (Ô page 18).
• Press [REC MODE] to select the recording mode.
• When recording a bilingual programme (Ô page 16).
• When the output signal from the external equipment is
NTSC, change “TV System” to “NTSC” in the Setup menu
(Ô page 43). This unit cannot record to discs containing
both PAL and NTSC signals.
• To reduce noise in input from external equipment, set “AV-in
NR” to “On” (Ô page 29).
• When recording from the unit’s DV IN terminal
Select the type of audio recording from “Audio Mode for DV
Input” in the Setup menu (Ô page 40).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals,
select “AV3”.
2 Start play on the other equipment.
3
When you want to start recording
Press [* REC].
Recording starts.
When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from
DV tape only.
• Using Flexible Recording (Ô page 19), you can record the
content of a video cassette (approx. 1–8 hours) to a 4.7 GB
disc with the best possible quality of recording without
wasting disc space.
To skip unwanted parts
Press [h] to pause recording. (Press again to restart
recording.)
DV automatic recording (DV Auto
Rec)
RAM -R -RW(V) +R +RW
To stop recording
Press [g].
RAM
Programmes are recorded as a title while at the same
time chapters are created at each break in the images and
the playlist is created automatically.
When “DV Auto Rec” screen is displayed
DV Auto Rec
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that
has been so treated cannot be recorded using this unit.
DV unit is connected.
Record From the DV unit ?
Press [w,q] to select “Rec
to DVD” and press
[ENTER].
You can proceed to step 4.
Rec to DVD
Cancel
SELECT
ENTER
RETURN
1
While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “DV Auto Rec”.
4 Press [w,q] to select “Rec” and press
RQT8320
[ENTER].
Recording starts.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting titles
Using DELETE Navigator to delete
titles
EXT LINK
CH
Preparation
DV IN
AV3
• Turn on the television and select the appropriate video input
to suit the connections to this unit.
• Turn the unit on.
2 CH 1
g * REC
• Insert the disc (Ô page 18).
1
While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “Delete” and
press [ENTER].
DELETE Navigator Title View
DVD-RAM
Numbered
07
08
--
buttons
BBC1 7/
--
5
SUN
BBC1 7/
--
5
SUN
--
DELETE
INPUT
SELECT
u,i
Previous
Next
Page
Select
02/02
ENTER
RETURN
SUB MENU
Previous
Nex
t
S
g
h
3 Press [e,r,w,q] to select the title and
press [ENTER].
To show other pages
Press [u] (Previous) or [i] (Next).
Multiple deleting
Select with [e,r,w,q] and press [h]. (Repeat.)
• A check mark appears. Press [h] again to cancel.
FUNCTIONS
RETURN
e,r,w,q
ENTER
4 Press [w,q] to select “Delete” and
A
* REC
C
B
press [ENTER].
REC MODE
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Deleting titles during play
1
While playing
RAM -R -R DL -RW(V) +R +R DL +RW
• A title cannot be restored once it is deleted.
Make certain before proceeding.
Press [DELETE].
Delete
• You cannot delete while recording.
DOCUMENTARY
Date
Name
7 / 5/2006 SUN Time
10
19:41
RAM
1:57(SP)
Remaining Time
When a recorded title is deleted the available disc space will
increase by the amount deleted.
Corresponding chapter of playlists will be deleted.
Delete Cancel
SELECT
ENTER
The available disc space increases if
any of these is deleted.
RETURN
2 Press [w,q] to select “Delete” and
The last
recorded title space
The available
press [ENTER].
- - - -
Title1
Title2
-RW(V) +RW
Disc space increases only when the last recorded title is
deleted.
The available space does
When deleted, the
not increase if these are
available disc space
deleted.
increases.
The last
recorded title space
The available
- - - -
Title1
Title2
-R -R DL +R +R DL
Available space does not increase after deletion.
RQT8320
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Management
Refer to the control reference on page 35.
Deleting all titles and playlists
–Delete all titles
Common procedures
Preparation
RAM
RAM
•
Release protection (Ô below).
After performing steps 1–3 (Ô left)
1
While stopped
4 Press [e,r] to select “Delete all titles”
Press [FUNCTIONS].
and press [ENTER].
2 Press [e,r] to select “To Others” and
5 Press [w,q] to select “Yes” and press
press [ENTER].
[ENTER].
3 Press [e,r] to select “DVD
6 Press [w,q] to select “Start” and
Management” and press [ENTER].
Select which step 4 to perform depending on what you
want to do next.
press [ENTER].
A message appears when finished.
7 Press [ENTER].
To exit the screen
Press [RETURN] several times.
Note
To return to the previous screen
Press [RETURN].
• Once deleted, the recorded contents are lost and
cannot be restored. Make certain before proceeding.
• Deleting all video titles will result in all playlists also being
deleted.
Providing a name for a disc
• Delete does not work if one or more titles are protected.
RAM -R -R DL -RW(V) +R +R DL +RW
After performing steps 1–3 (Ô above)
Deleting all the contents of a disc
–Format Disc
4 Press [e,r] to select “Disc Name”
and press [ENTER].
RAM -RW(V) +RW -RW(VR)
Ô page 43, Entering text
+R +R DL
Note
(New disc only)
• The disc name is displayed in the DVD Management
window.
• With a finalized disc and +RW, the name is displayed
on the Top Menu.
Formatting deletes all contents (including computer
data), and they cannot be restored. Check carefully
before proceeding. The contents are deleted when you
format it even if you have set protection.
DOCUMENTARY
My favorite
DVD
Management
01
Titles
Used
11
0:22
Rema
DVD-RAM
Chapter 1
Disc Name
After performing steps 1–3 (Ô left)
4 Press [e,r] to select “Format Disc”
Setting the protection
and press [ENTER].
RAM
5 Press [w,q] to select “Yes” and press
After performing steps 1–3 (Ô above)
[ENTER].
4 Press [e,r] to select “Disc
6 Press [w,q] to select “Start” and
Protection” and press [ENTER].
press [ENTER].
A message appears when formatting is finished.
5 Press [w,q] to select “Yes” and
Note
press [ENTER].
• Do not disconnect the AC mains lead while
formatting. This can render the disc unusable.
• Formatting normally takes a few minutes, however it
RAM
DVD
Management
DVD-RAM
Titles
Used
11
0:03
Remain
1:57(SP)
may take up to a maximum of 70 minutes (
).
Disc Name
Disc Protection
Delete all titles
Off
7 Press [ENTER].
Note
The lock symbol appears closed when the disc is write-
protected.
-R -R DL CD
•
•
Formatting cannot be performed on the disc.
You can format only as DVD-Video format on
-RW(V) -RW(VR)
Cartridge–protection
this unit.
• When a disc has been formatted using this unit, it may not
be possible to use it on any other equipment.
RAM
(with a cartridge)
With the write-protect tab in the protect
position, play automatically starts when
inserted in the unit.
RAM
To stop formatting
PROTECT
Press [RETURN].
• You can cancel formatting if it takes more than 2 minutes.
The disc must be reformatted if you do this.
RQT8320
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting whether to show the Top
Menu first
Creating Top Menu
–Create Top Menu
–Auto-Play Select
-R -R DL -RW(V) +R +R DL +RW
You can select whether to show the top menu after finalizing.
Make selections before finalizing the disc.
+RW
+RW discs contain no Top Menu data. Top Menu is a
convenient function. We recommend you to create the menu
before playing a +RW disc on other equipment.
After performing steps 1–3 (Ô page 36)
After performing steps 1–3 (Ô page 36)
4 Press [e,r] to select “Create Top
4 Press [e,r] to select “Auto-Play
Menu” and press [ENTER].
Select” and press [ENTER].
5 Press [w,q] to select “Yes” and press
5 Press [e,r] to select items and press
[ENTER].
[ENTER].
6 Press [w,q] to select “Start” and
Top Menu:The top menu appears first.
Title 1:
The disc content is played without displaying
the top menu.
press [ENTER].
Creating Top Menu starts. You cannot cancel creating.
Creating Top Menu can take a few minutes.
Enabling discs to be played on
other equipment
–Finalize
7 Press [ENTER].
• Recording or editing on the disc may delete the menu. In
that case, create the menu again.
• You cannot use the title menu for playing on this unit.
-R -R DL -RW(V) +R +R DL
Enabling the second layer on DL
(dual- or double- layer on single
side) discs to be recordable
–Close First Layer
Finalize the disc so you can play it on other DVD equipment.
The equipment must be able to play finalized discs. To check
compatibility with other equipment, refer to page 6.
After performing steps 1–3 (Ô page 36)
4 Press [e,r] to select “Finalize” and
-R DL +R DL
press [ENTER].
DVD-R DL and +R DL discs have two layers of recording
surface on one side. This unit does not offer seamless
recording on two layers. Recording stops when space on the
first layer becomes full. You must close the first layer to start
recording on the second layer. Closing makes the first layer
unavailable for recording (editing is still available). You
cannot cancel closing. Make certain before proceeding.
5 Press [w,q] to select “Yes” and press
[ENTER].
6 Press [w,q] to select “Start” and
press [ENTER].
• Finalizing starts. You cannot cancel finalizing.
• Finalizing can take a few minutes, up to a maximum
of 15 minutes, depending on the remaining space on
-R DL +R DL
After performing steps 1–3 (Ô page 36)
4 Press [e,r] to select “Close First
the disc. (
Note
up to 60 minutes.)
Layer” and press [ENTER].
5 Press [w,q] to select “Yes” and press
Do not disconnect the AC mains lead while
finalizing. This will render the disc unusable.
[ENTER].
7 Press [ENTER].
After finalizing
6 Press [w,q] to select “Start” and
press [ENTER].
Closing the layer starts. You cannot cancel closing.
Closing the layer can take several minutes, up to a
maximum of 30 minutes, depending on the remaining
space on the first layer.
-R -R DL +R +R DL
•
The disc becomes play-only and you
can no longer record or edit.
-RW(V)
•
You can record and edit the disc after
formatting (Ô page 36) although it becomes play-only
Note
after finalizing.
• Titles are divided into about 5-minute (
Do not disconnect the AC mains lead while closing
the layer. This will render the disc unusable.
+R +R DL
8-minute)
chapters after finalizing. This time varies greatly
depending on the condition and mode of recording.
• There is a pause of several seconds between titles and
chapters during play.
7 Press [ENTER].
• You cannot close the first layer when it has no recording.
• By closing the layer, you can record or edit discs that have
been recorded on the second layer by other equipment.
• You cannot finalize discs recorded on other manufacturers’
equipment.
• Discs finalized on this unit may not be playable on other
players due to the condition of the recording.
• When finalizing a high-speed recording compatible disc, it
may take longer than displayed on the confirmation screen
(approximately four times).
n To confirm the layer you can record
You can confirm the remaining recording time on the layer
you can record.
DVD
Management
DVD-R DL
Titles
Used
1
0:00
Remain
3:54(LP)
of the first layer
Disc Name
Auto-Play Select
Finalize
Top Menu
RQT8320
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with the TV (Q Link)
What is Q Link?
Q Link enables you to connect this unit to a Q Link-equipped Panasonic TV and perform various linked functions.
The following systems from other manufacturers have similar function to Q Link from Panasonic.
For details, refer to your television’s operating instructions or consult your dealer.
• Q Link (registered trademark of Panasonic)
• Easy Link (registered trademark of Philips)
• SMARTLINK (registered trademark of Sony)
• DATA LOGIC (registered trademark of Metz)
• Megalogic (registered trademark of Grundig)
Preparation
• Connect this unit to your TV with a fully wired 21-pin Scart lead (Ô page 8–10).
TV/DVD Auto On
When you press the following buttons, linked operations with the TV activate and corresponding
screens appear.
When this unit is on:
Press [q] (PLAY)
When this unit is off:
Press [q] (PLAY)
[DIRECT NAVIGATOR]
[DIRECT NAVIGATOR]
[VIDEO Plus+]
[PROG/CHECK]
[FUNCTIONS]
[VIDEO Plus+]
[PROG/CHECK]
DVD-V DVD-A CD VCD
•
and MP3
The TV is automatically turned on and corresponding screens appear when you insert the discs.
DVD Auto Standby
Direct TV Recording
When you turn the TV off, the unit is turned off as well. However, this function works
in the stop mode [while screen saver (Ô right) is displayed on the television, this
does not work].
This function does not work during the following operations: channel reception
setting, Auto Clock Setting, Child Lock and Manual Tuning.
You can record the same programme that you are watching on the TV.
• This function allows you to immediately start recording the programme that you are viewing on the
TV without having to change the channels on this unit.
• Just make sure you have a disc ready in the unit so that when a programme comes on the
television that you want to record, all you have to do is press [* DIRECT TV REC]. You don’t even
have to turn this unit on.
Press [* DIRECT TV REC] for 1 second.
Recording starts.
To stop recording
Press [g].
Download from the TV
As you set TV stations, the station list data is automatically copied from the TV to the unit, and the
TV stations are assigned to the programme positions on the unit in the same order as on the TV.
Child Lock
The Child Lock deactivates all buttons on the unit and remote
control. Use it to prevent other people from operating the
unit.
Press and hold [ENTER] and [RETURN]
simultaneously until “X HOLD” appears
on the unit’s display.
ENTER
RETURN
If you press a button while the Child Lock is on, “X HOLD”
appears on the unit’s display and operation is impossible.
To cancel the Child Lock
Press and hold [ENTER] and [RETURN] simultaneously until
“X HOLD” disappears.
RQT8320
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the unit’s settings
Refer to the control reference on page 35.
Common procedures
1
While stopped
4 Press [e,r] to select the tab and
Press [FUNCTIONS].
press [q].
2 Press [e,r] to select “To Others” and
5 Press [e,r] to select the menu and
press [ENTER].
press [ENTER].
3 Press [e,r] to select “Setup” and
6 Press [e,r] to select the option and
press [ENTER].
press [ENTER].
Tabs
Menus
Options
To return to the previous screen
Press [RETURN].
Setup
Remote Control
DVD 1
Clock
To exit the screen
Press [RETURN] several times.
Owner ID
Initialize
Tuning
Disc
Note
Picture
Sound
There may be differences in operation methods. If this
happens, follow the on-screen instructions for the operation.
Display
Connection
Others
SELECT
RETURN
TAB
Summary of settings
The settings remain intact even if you switch the unit to standby.
Tabs
Menus
Options (Underlined items are the factory presets.)
Tuning
Manual (Ô page 42)
Auto-Setup Restart (Ô page 42)
Download from TV (Ô page 42)
Disc
Settings for Playback
• Press [ENTER] to show the following settings.
Ratings
• 8 No Limit:All DVD-Video can be played.
Set a ratings level to limit DVD-Video play.
• 1 to 7:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
Follow the on-screen instructions. Enter a 4-digit • 0 Lock All:Prohibits play of all DVD-Video.
password with the numbered buttons when the
password screen is shown.
• Do not forget your password.
• Unlock Recorder
• Change Level
• Change Password
• Temporary Unlock
DVD-Audio Video mode Playback
Select “On” to play DVD-Video content on some
DVD-Audio.
• On: The setting returns to “Off” when you change the
disc or turn the unit off.
• Off
Soundtrack • Some discs start in a certain
• English
• Spanish
• German
• French
• Italian
language despite any changes
you make here.
DVD-V
• Original: The original language of each disc will be
selected.
• Other
• Automatic:If the language selected for “Soundtrack” is not
available, subtitles of that language will
• Enter a code (Ô page 50) with
the numbered buttons when you
select “Other
”. When
Subtitle
DVD-V
the selected language is not
available on the disc, the default
language is played. There are
discs where you can only switch
the language from the menu
screen (Ô page 24).
automatically appear if available on that disc.
• German
• Other
• German
• Other
• English
• Spanish
• English
• Spanish
• French
• Italian
Menus
• French
• Italian
DVD-V
Settings for Recording
• Press [ENTER] to show the following setting.
Recording time in EP mode
• EP ( 6Hours ):
You can record for 6 hours on an unused 4.7 GB disc.
• EP ( 8Hours ):
Select the maximum number of hours for
recording in EP mode (Ô page 17, Recording
modes and approximate recording times).
You can record for 8 hours on an unused 4.7 GB disc.
Picture
Comb Filter
• On: Select it to record clear picture.
• Off: Normally, use this setting.
Select the picture sharpness when recording.
The setting is fixed with “On” if you set “TV System”
to “NTSC” (Ô page 43).
Still Mode
• Automatic:
• Field:
Select the type of picture shown when you pause
play (Ô page 49, Frames and fields).
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected. (The
picture is clearer and finer.)
RQT8320
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the unit’s settings
Refer to the control reference on page 35.
Tabs
Menus
Options (Underlined items are the factory presets.)
Sound
• On
(Dolby Digital
• Off
DVD-V
Dynamic Range Compression
only)
Change the dynamic range for late night viewing.
Bilingual Audio Selection
• M 1
• M 2
-R -R DL -RW(V) +R +R DL +RW
You cannot select this when recording from an external
source (except from DV equipment connected to this unit’s
DV IN terminal). Select the audio on the other equipment.
Select whether to record the main or secondary
audio type when recording to a disc.
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal
(Ô page 11).
• Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz or 88.2 kHz.
• On: Signals are converted to 48 kHz or 44.1 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz
or 88.2 kHz.)
• Signals are converted to 48 kHz or 44.1 kHz
despite the above settings if the signals have a • Off: Signals are output as 96 kHz or 88.2 kHz.
sampling frequency of over 96 kHz or 88.2 kHz,
or the disc has copy protection.
(Choose when the connected equipment can
process signals with a sampling frequency of 96 kHz
or 88.2 kHz.)
Dolby Digital
Select how to output the • Bitstream: When connecting to equipment displaying the
signal.
Dolby Digital logo.
Select “Bitstream” if the
connected equipment
decodes the signal.
Select “PCM” if this unit
decodes the signal and
output it as 2 channel.
• PCM:
When connecting to equipment not displaying
the Dolby Digital logo.
DTS
• Bitstream: When connecting to equipment displaying the
DTS logo.
• PCM:
When connecting to equipment not displaying
the DTS logo.
Note
Not making the proper
settings may result in
noise or some trouble for
digital recording.
MPEG
• Bitstream: When connected to equipment with a built-in
MPEG decoder.
• PCM:
When connected to equipment without a built-in
MPEG decoder.
Audio Mode for DV Input
• Stereo 1: Records audio (L1, R1).
You can select the kind of audio when recording from • Stereo 2: Records added audio such as narration (L2,
the unit’s DV IN terminal (Ô page 34).
R2) subsequent to original recording.
Records both Stereo 1 and Stereo 2.
• Mix:
-R -R DL -RW(V) +R +R DL +RW
When recording bilingual broadcast to a disc, select the type
of audio in advance from “Bilingual Audio Selection”
(Ô above).
Display
On-Screen Messages
Choose whether to show status messages
automatically.
• Automatic • Off
Grey Background
• On
• Off
Select “Off” if you do not want to have the unit show
the grey background when tuner reception is weak.
FL Display
Changes the brightness of the unit’s display.
• Bright
• Dim
Connection TV Aspect (Ô page 14)
• 16:9
• On
• 4:3
• Off
• Letterbox
Progressive (Ô page 14)
This setting is fixed with “Off” if you set “AV1 Output”
to “RGB 1 ( without component )” or “RGB 2
( without component )” (Ô below).
TV System (Ô page 43)
• PAL
• NTSC
AV1 Output
• Video ( with component ):
Select when a TV is connected that can receive a composite
signal.
Select the output from the AV1 terminal.
Select “RGB 1 ( without component )” or “RGB 2
( without component )” for RGB output.
Select “Video ( with component )” or “S Video ( with
component )” for component output (progressive
output).
• S Video ( with component ):
Select when a TV is connected that can receive an S Video
signal.
• RGB 1 ( without component ):
Select when you have connected a TV that can receive RGB
signals.
Set according to the signal and terminal of the
connected TV.
Select this mode so the TV automatically switches to
display the picture from the unit when you turn the unit on.
• RGB 2 ( without component ):
Select when you have connected a TV that can receive RGB
signals.
If you would like to switch to display the picture from the
unit only when playback or viewing menus, select this
mode.
RQT8320
(Continued on next page)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Tabs
Menus
Options (Underlined items are the factory presets.)
Connection AV2 Settings
(Continued) Set to match the connected equipment.
• Press [ENTER] to show the following setting.
AV2 Input
• Video
• S Video
This setting is according to the output signal of
the connected equipment.
Ext Link
• Ext Link 1:When a satellite/digital terrestrial receiver (SKY
Digital STB etc.) which transmits a special
control signal recordings via the 21-pin Scart
lead is connected.
This setting cannot be made when the “TV
System” is set to “NTSC” (Ô page 43).
Start and stop timings of recording are
controlled by the control signal (SKY Digital
STB/digital terrestrial receiver using the “SKY
Personal Planner” function).
• Ext Link 2:When an external equipment with a timer
function is connected.
When it turns on, recording starts.
When it turns off, recording stops.
Others
Remote Control (Ô page 15)
• DVD 1
• DVD 2
• DVD 3
Clock (Ô below)
Owner ID (Ô page 12)
• PIN number
• House No.
• Name
• Postcode
In order to prevent another person from using this
unit if it is stolen, you can set a PIN number and input
your personal information.
Once the PIN number has been set, you cannot
return to the factory preset. Make sure not to forget
this.
Initialize
• Press [ENTER] to show the following setting.
Shipping Condition
• Yes
• Yes
• No
• No
All the settings except for the ratings level, ratings
password, Owner ID and time settings return to
the factory preset. The timer recording
programmes are also cancelled.
Default Settings
All the settings except for the programmed
channels, time settings, disc language settings,
ratings level, ratings password, Owner ID and
remote control code return to the factory presets.
Set the clock manually
Refer to the control reference on page 35.
Clock
• Usually, the unit’s channel reception setting function
(Ô page 12) automatically adjusts the clock to correct
time. Under some reception conditions, however, the unit
cannot set the clock automatically.
Automatic Off
Date
Time
15
:
45
:
39
7
/
5
/
2006
Number
0
9
• In this case, follow the operation steps below to manually
set the clock.
Please set clock manually.
ENTER : store RETURN : leave
CHANGE
ENTER
SELECT
RETURN
• In the case of a power failure, the clock setting remains in
memory for approximately 60 minutes.
7 Press [w,q] to select the item you
want to change.
1
While stopped
The items change as follows:
Press [FUNCTIONS].
Hour
Minute
Second
Day
Month
Year
2 Press [e,r] to select “To Others” and
8 Press [e,r] to change the setting.
press [ENTER].
You can also use the numbered buttons for setting.
3 Press [e,r] to select “Setup” and
9 Press [ENTER] when you have
press [ENTER].
finished the settings.
4 Press [e,r] to select “Others” and
The clock starts.
press [q].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
5 Press [e,r] to select “Clock” and
press [ENTER].
6 Press [e,r] to select “Off” of
Note
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the
automatic time correction function checks the time and if
necessary it is adjusted several times every day.
“Automatic” and press [ENTER].
RQT8320
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting channel setting
Refer to the control reference on page 35.
Pos
To change the programme position in
which the TV stations are assigned
Press [e,r] or the numbered buttons to select
the number of the desired programme position
and press [ENTER].
You can add or delete channels, or change programme
positions.
1
While stopped
Press [FUNCTIONS].
Name
To enter or change the name of a TV
station
Press [e,r,w,q] to enter station name and
press [ENTER].
If the station name needs a blank space,
select the blank between “Z” and “ ”.
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “Setup” and
press [ENTER].
Channel
To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [e,r] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV
station has been tuned.
4 Press [e,r] to select “Tuning” and
press [q].
Setup
Manual
Auto-Setup Restart
Download from TV
Tuning
After the desired TV station is tuned, press
[ENTER].
Disc
Picture
Sound
NICAM
To select the type of sound to be recorded
Press [e,r] to select “Auto” and press
[ENTER].
Display
Connection
TAB
SELECT
ENTER
Others
RETURN
• Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is
distorted due to inferior reception conditions.
5 Press [e,r] to select “Manual” and
press [ENTER].
Manual Tuning
Pos Name Ch
Pos Name Ch
Title Page To enter the Teletext title page for a
channel
1
2
BBC 1 22
BBC 2 23
11
12
13
14
15
16
17
18
19
20
3
4
5
ITV
CH4
CH5
24
25
26
Entering title page number allows the unit to
automatically record programme and station
names.
Press [e,r] or the numbered buttons to enter
the number and press [ENTER].
• To find the correct title page for the station,
refer to its Teletext TV guide.
6
7
8
9
SELECT
ENTER
RETURN
10
Delete Move
Add
B
A
C
To delete a programme position
Press [e,r,w,q] to select a programme position and
press [A].
• The unit’s clock must be set correctly.
Automatic setting
To add a blank programme position
Press [e,r,w,q] to select a programme position and
press [B].
You can restart auto channel setting if the channel reception
setting (Ô page 12) fails for some reason.
To move a TV station to another programme
position
1 Press [e,r,w,q] to select a programme position
and press [C].
2 Press [e,r] to select the new programme position
to which you want to assign the TV station and
press [ENTER].
After performing steps 1–4 (Ô left)
5 Press [e,r] to select “Auto-Setup
Restart” or “Download from TV” and
press [ENTER].
The confirmation screen appears.
Select “Download from TV” when you connect the unit
to a Q Link-compatible TV with a fully wired 21-pin
Scart lead. (Programme positions are downloaded
from the TV and copied through this convenient
function.)
Note
When the unit connected to a Q Link-compatible TV
with a fully wired 21-pin Scart lead sets itself
automatically (Ô page 12), only deletion of the
programme position can be performed.
6 Press [w,q] to select “Yes” and press
[ENTER].
To change detailed station settings
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
After performing steps 1–5 (Ô above)
Press and hold [2 CH] and [CH 1] on the main unit for
about 5 seconds.
• All the settings except for the ratings level, ratings
password, Owner ID and time settings return to the factory
preset. The timer recording programmes are also
cancelled.
6 Press [e,r,w,q] to select a
programme position and press
[ENTER].
Pos
1
Manual
Tuning
Name
BBC 1
22
Channel
NICAM
Title Page
To exit the screen
Press [RETURN] several times.
Auto
301
CHANGE
RETURN
To return to the previous screen
Press [RETURN].
RETURN : leave
Press [e,r] to select an item and press [q].
RQT8320
42
Download from Www.Somanuals.com. All Manuals Search And Download.
TV System
Entering text
RAM -R -R DL -RW(V) +R +R DL +RW
You can give names to recorded titles, etc.
The maximum number of characters:
Numbered
-R -R DL
buttons
RAM
Characters
-RW(V) +R
+R DL +RW
Characters
Title
Title
Disc
44
40
64 (44 )
64
u,i
Playlist
Disc
64
g
h
Title name for timer recording
If a name is long, parts of it may not be shown in some screens.
e,r,w,q
FUNCTIONS
RETURN
ENTER
1 Show Enter Name screen.
Title (timer recording)
(Ô page 20, 21, step 3)
(Ô page 30, step 3)
(Ô page 33, step 5)
Title
SUB MENU
Playlist
Disc
(Ô page 36, “Providing a name for a disc”)
Name field: shows the text you have entered
Enter Name
_
Change this setting if you connect an NTSC television or to
record NTSC video from another source.
1
2
3
4
5
6
7
8
9
0
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
6
b
e
7
c
f
8
9
$
0
d
g
j
/
%
&
1
While stopped
h
k
i
#
L
O
R
V
Y
?
l
@
_
Delete
Add to List
List Names
m
n
o
[
]
(
M
P
T
Press [FUNCTIONS].
S
p
t
q
u
x
'
r
s
{
)
-
v
}
2 Press [e,r] to select “To Others” and
Set
W
.
Z
!
w
"
y
:
z
;
|
\
`
SELECT
press [ENTER].
Space
ENTER
RETURN
3 Press [e,r] to select “Setup” and
2 Press [e,r,w,q] to select a character
press [ENTER].
and press [ENTER].
4 Press [e,r] to select “Connection”
Repeat this step to enter other characters.
• To delete a character
and press [q].
Press [e,r,w,q] to select the character in the name
field and press [h].
• Using the numbered buttons to enter characters
e.g., entering the letter “R”
1 Press [7] to move to the 7th
row.
5 Press [e,r] to select “TV System”
and press [ENTER].
6 Press [e,r] to select the TV system
and press [ENTER].
2
Press [7] twice to highlight “R”.
TV System
Setup
3 Press [ENTER].
• To enter a space
PAL
NTSC
Tuning
Disc
Press [ ] and press [ENTER].
• Add/recall names (Ô below)
Picture
• PAL (factory preset)
3 Press [g] (Set).
–Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are
played as PAL 60.
Returns to the previously displayed screen.
–Select to record television programmes and PAL
input from other equipment.
To end partway
Press [RETURN].
Text is not saved.
• NTSC
–Select when connecting to a NTSC television.
Television programmes cannot be recorded
properly.
n To add a name
You can add frequently used names and recall them later.
Maximum number of registered names: 20
Maximum number of characters per name: 20
After entering the name (Ô above, steps 1–2).
1 Press [i] while the name to be added is shown in the
name field.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7 Press [w,q] to select “Yes” and press
[ENTER].
2 Press [w] to select “Add” and press [ENTER].
To cancel adding word
Press [RETURN].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
n To recall an added name
1 Press [u].
2 Press [e,r,w,q] to select the name to be recalled and
press [ENTER].
n To change the setting all at once (PAL ↔ NTSC)
n To delete an added name
1 Press [u].
While stopped, press and hold [g] and [; OPEN/CLOSE] on
the main unit at the same time for about 5 seconds.
2 Press [e,r,w,q] to select the name to be deleted and
press [SUB MENU].
3 Press [ENTER].
RQT8320
4 Press [w] to select “Delete” and press [ENTER].
5 Press [RETURN].
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Page
On the television
Cannot finish recording
completely.
• The programme was copy-protected.
• The disc may be full.
• The maximum number of times you can record the programme is exceeded.
—
—
—
Cannot record on the disc.
Unable to format.
• The disc may be dirty or scratched.
4
Please check the disc.
Cannot record. Disc is full.
31, 35, 36
RAM -RW(V) +RW
• Create space by deleting any unnecessary titles.
(Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no
increase in disc space.)
• Use a new disc.
Cannot record. Maximum
numbers of titles exceeded.
—
—
6
No disc
• The disc may be upside down.
This is a non-recordable disc. • The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,
DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW.
• You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW. Format the disc with
this unit.
This disc is not formatted
properly.
36
—
• The operation is prohibited by the unit or disc.
5
On the unit’s display
The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.
• The remote control and main unit are using different codes. Change
the code on the remote control.
Press and hold [ENTER] and the indicated number button at the
same time for more than 2 seconds.
15
—
DVD
(“ ” stands for a number.)
HARD ERR
(“HARD” and “ERR” are
• If there is no change after turning the unit on and off, consult the dealer where the unit was
purchased.
alternately displayed.)
NoREAD
NoWRIT
NoERAS
• The disc is dirty or badly scratched. The unit cannot record, play, or edit.
• This message may appear when the DVD lens cleaner has finished cleaning.
Press [; OPEN/CLOSE] on the main unit to eject the disc.
4
—
• Recording may be unavailable due to a disc problem. Use a new disc.
• The unit’s “TV System” setting differs from the TV system used by the disc. Change the “TV
System” in the Setup menu.
—
43
• Deleting an item may be unavailable due to a disc problem. Use a new disc.
—
PLEASE WAIT
(“PLEASE” and “WAIT” are
alternately displayed.)
• Displayed when the unit is started. This is not a malfunction.
• The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE
WAIT” is displayed.
—
—
PROG FULL
(“PROG” and “FULL” are
alternately displayed.)
• There are already 16 timer programmes. Delete unnecessary timer programmes.
22
6, 7
36
UNSUPPORT
(“UNSUP” and “PORT” are
alternately displayed.)
• You have inserted a disc the unit cannot play or record on.
UNFORMAT
(“UNFOR” and “MAT” are
• You have inserted a new DVD-RW/+R/+R DL/+RW or a DVD-RAM/DVD-RW (DVD-Video
format) recorded on other equipment.
alternately displayed.)
U59
• The unit is hot.
—
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message
disappears.
Select a position with good ventilation when installing the unit. Do not block the vent on the
rear of the unit.
U61
U88
• The unit detected an error while recording or playing with no disc in the disc tray. The unit is
carrying out its recovery process. This process restores the unit to normal operation. The
unit is not broken. Wait until the message disappears.
—
• The unit detected an error while recording or playing with a disc in the disc tray. The unit is
carrying out its recovery process. This process restores the unit to normal operation. The
unit is not broken. Wait until the message disappears.
46
U99
• The unit fails to operate properly. Press [8] on the main unit to switch the unit to standby.
—
Now press [8] on the main unit again to turn the unit on.
X HOLD
• The Child Lock function is activated.
38
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
RQT8320
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Set up
Page
11
• DVD-Video:
What equipment is necessary to play multi
channel surround sound?
You can play DVD-Video multi channel surround by digitally connecting an
amplifier equipped with a Dolby Digital, DTS or MPEG decoder.
• DVD-Audio:
—
This unit plays DVD-Audio in 2 channels. You cannot play multi channel
surround sound.
• You cannot directly connect to the unit. Connect through the amplifier etc.
11
Are the headphones and speakers directly
connected to the unit?
• If you have a regular television (CRT: cathode ray tube), we recommend using
the Scart terminal. You can enjoy high-quality RGB video from this unit by
connecting to an RGB compatible television.
If you have an LCD/plasma television or LCD projector compatible with
progressive scan, connect through the component video terminals for high-
quality progressive video.
8–11
The television has a Scart terminal and
component video input terminal. Which
terminal should I connect with?
If you have a CRT television or a multi system television using PAL mode that
is compatible with progressive scan, we cannot recommend progressive
output as some flickering can occur.
• All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i · 60p
input terminals are compatible. Consult the manufacturer if you have another
brand of television.
—
Is my television progressive output
compatible?
Disc
• You can play on compatible equipment such as DVD players after finalizing the
disc on this unit. It is not necessary to finalize +RW. However depending on
the condition of the recording, the quality of the disc and capabilities of the
DVD player, play may not be possible.
37
Can DVD-R, DVD-R DL, DVD-RW (DVD-
Video Format), +R, +R DL and +RW
recorded on this unit be played on other
equipment?
• You cannot play DVD-Video if their region number does not include “2” or
“ALL”. Refer to the disc’s jacket for more information.
Cover
—
Can I play DVD-Video, DVD-Audio and Video
CDs bought in another country?
• The DVD-Video region number indicates the disc conforms to a standard. You
cannot play discs that do not have a region number.
Can a DVD-Video that does not have a
region number be played?
• This unit records and plays DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R, +R DL and +RW, and plays DVD-RW (VR format).
• This unit also records and plays high speed recording compatible discs.
• After recording but before finalizing +R, +R DL discs
6, 7
Please tell me about DVD-R, DVD-R DL,
DVD-RW, +R, +R DL and +RW compatibility
with this unit.
—
—
– You may not be able to play and record discs on this unit after recording
them on other Panasonic products or other manufacturer’s equipment.
– You may not be able to play and record discs on other equipment after
recording them on this unit.
After finalizing the disc, however, you will be able to play it on any DVD-Video
compatible player.
• This unit plays CD-R/CD-RW discs (audio recording discs) which have been
recorded under one of the following standards: CD-DA, Video CD, SVCD
(conforming to IEC62107), MP3 and still pictures (JPEG/TIFF).
Close the session after recording.
7, 26
—
Please tell me about CD-R and CD-RW
compatibility with this unit.
• You cannot write to a CD-R or CD-RW with this unit.
Recording
• Most commercially sold video cassettes and DVD are copy protected;
therefore, recording is usually not possible.
—
—
Can I record from a commercially purchased
video cassette or DVD?
• You cannot record digital signals. The digital audio terminals on this unit are
for output only. (The audio recorded using the unit’s DV IN terminal from a
digital video camcorder, for example, is recorded digitally.)
Can I record digital audio signals using this
unit?
• You can record if using the PCM signal. When recording DVD, change the
“Digital Audio Output” settings to the following from the Setup menu.
40
Can a digital audio signal from this unit be
recorded to other equipment?
– PCM Down Conversion:
On
– Dolby Digital/DTS/MPEG: PCM
However, only
– As long as digital recording from the disc is permitted.
– As long as the recording equipment is compatible with a sampling frequency
of 48 kHz.
• You cannot record MP3 signals.
—
—
• With DVD-RAM, you can. Just press [AUDIO]. This does not affect the actual
recording of the audio.
Can I switch to bilingual broadcast during
recording?
• With DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW,
you cannot.
—
RQT8320
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
• Regular disc rotating sounds.
• Poor reception due to atmospheric conditions.
• Image disturbance during search.
• Operations do not work due to a poor-quality disc. (Try again using a
Panasonic disc.)
• The unit freezes due to one of its safety devices being activated.
(Press and hold [8] on the main unit for 10 seconds.)
•
Interruptions in reception due to periodic satellite broadcasting breaks.
Power
Page
No power.
The unit does not turn on
pressing [^ DVD].
• Insert the AC mains lead securely into a known active AC mains socket.
8–10
23
• Linked timer recordings with external equipment is in recording standby (“EXT-L” on the unit’s
display blinks when [^ DVD] is pressed). Press [EXT LINK] to cancel the recording standby.
The unit switches to the
standby mode.
• One of the unit’s safety devices is activated. Press [8] on the main unit to turn the unit on.
—
TV screen and video
Television reception
worsens after connecting
the unit.
• This can occur because the signals are being divided between the unit and other equipment. It can
be solved by using a signal booster, available from audio-visual suppliers. If it is not solved by
using a signal booster, consult the dealer.
—
Status messages do not
appear.
The grey background does • Select “On” in “Grey Background” in the Setup menu.
not appear.
Picture does not appear
during timer recording.
The 4:3 aspect ratio picture • Use the television to change the aspect. If your television does not have that function, set
expands left and right.
Screen size is wrong.
There is a lot of after-image • Set “Playback NR” in the Picture menu to “Off”.
when playing video.
• Select “Automatic” in “On-Screen Messages” in the Setup menu.
40
40
—
29
• Timer recordings work regardless whether the unit is on or off. To confirm the timer recording is
going to work properly, turn the unit on.
“Progressive” in the Picture menu to “Off”.
• Check the settings for “TV Aspect” in the Setup menu.
14
29
When playing DVD-Video
using progressive output,
one part of the picture
momentarily appears to be
doubled up.
• Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method or
material used on DVD-Video, but should be corrected if you use interlace output.
29
There is no apparent
change in picture quality
when adjusted with the
Picture menu in the on-
screen menus.
• The effect is less perceivable with some types of video.
—
The images from this unit
do not appear on the
television.
• Make sure that the television is connected to the AV1 terminal, VIDEO OUT terminal, S VIDEO
OUT terminal or COMPONENT VIDEO OUT terminals on this unit.
8–11
• Make sure that the television’s input setting (e.g., AV1) is correct.
—
—
Picture is distorted.
• Progressive output is set to on but the connected television is not progressive compatible.
Press and hold [g] and [q x1.3] on the main unit at the same time for about 5 seconds. The setting
will change to interlace.
• The unit’s “TV System” setting differs from the TV system used by the disc now playing. While
stopped, press and hold [g] and [; OPEN/CLOSE] on the main unit for 5 or more seconds. The
system switches from PAL to NTSC or vice versa.
43
Displays
The display is dim.
“0:00” is flashing on the
unit’s display.
• Change “FL Display” in the Setup menu.
• Set the clock.
40
41
The clock is not correct.
• Under adverse reception conditions, etc., the automatic time correction function may not work. In
this case, “Automatic” is automatically turned to “Off”. If re-setting the Auto Clock Setting does not
work, set the time manually.
41
The time recorded on the
• Times shown may disagree with actual times.
—
—
disc and the available time • Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no increase in
shown do not add up.
The play time shown for
MP3 does not agree with
the actual time.
disc space.
• Available recording space on a DVD-RW (DVD-Video format) or +RW increases only when the last
recorded title is deleted. It does not increase if other titles are deleted.
• More disc space than the actual recording time is used after recording or editing DVD-R, DVD-
R DL, +R or +R DL 200 times or more. (For the second layer on DVD-R DL and +R DL, this
happens after about 60 times.)
—
—
• While searching, the elapsed time may not display correctly.
—
—
“U88” is displayed and the • The unit is carrying out the recovery process. Do the following to eject the disc.
disc cannot be ejected.
1
Press [8] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [8] on the main unit for about 10 seconds.
The unit is forcibly switched to standby.
While the unit is off, press and hold [g] and [CH 1] on the main unit at the same time for about
5 seconds. Remove the disc.
2
Sound
No sound.
• Check the connections and settings. Check the input mode on the amplifier if you have connected 8–11, 40
Low volume.
one.
Distorted sound.
Cannot hear the desired
audio type.
• Press [AUDIO] to select the audio.
24
29
• Turn off V.S.S. in the following cases.
–When using discs that do not have surround sound effects such as Karaoke discs.
–When playing bilingual broadcast programmes.
• The disc may have a restriction on the method of audio output. Some discs prohibit down-mixing
and this unit can then only output the front two channels. Refer to the disc’s jacket.
• You cannot change the audio type when playing DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R, +R DL or +RW. When any these disc types is in use, the audio of broadcast programme
cannot be changed.
—
—
Cannot switch audio.
• When connecting an amplifier using an optical digital cable, you cannot switch the audio if “Dolby
Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio cables.
• There are discs which audio cannot be changed because of how the disc was created.
11, 40
—
RQT8320
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Page
Cannot operate the
television.
The remote control doesn’t
work.
• Change manufacturer code. Some televisions cannot be operated even if you change the code.
• The remote control and main unit are using different codes. Change the
code on the remote control.
Press and hold [ENTER] and the indicated number button at the same
time for more than 2 seconds.
15
15
• The batteries are depleted. Replace them with new ones.
• You are not pointing the remote control at the main unit’s remote control signal sensor during
operation.
• Coloured glass may obstruct the signal reception/transmission.
• Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight
exposure.
7
7
—
—
• It may be necessary to set the code on the remote control again after changing the batteries.
• It may be necessary to set the manufacturer code again after changing the batteries.
• The child lock function is activated.
15
15
38
The unit is on but cannot
be operated.
• Some operations may be prohibited by the disc.
• The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.
• One of the unit’s safety devices may have been activated.
Reset the unit as follows:
—
—
—
1
Press [8] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [8] on the main unit for about 10 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it.
Press [8] on the main unit to switch it on. If the unit still cannot be operated, consult the dealer.
2
Cannot eject disc.
• Linked timer recordings with external equipment is in recording standby (“EXT-L” on the unit’s
display blinks when [^ DVD] is pressed). Press [EXT LINK] to cancel the recording standby.
• The unit is recording.
23
—
—
• The unit may have a problem. While the unit is off, press and hold [g] and [CH 1] on the main unit
at the same time for about 5 seconds. Remove the disc and consult the dealer.
•
If the Child Lock function is activated, above operation does not work. Cancel the Child Lock function.
38
Cannot tune channels.
• Check the connections.
• You must connect to a television equipped with the Q Link function with a fully wired 21-pin Scart
lead to download channel presets.
8–10
8–10
Cannot download the
tuning positions.
Startup is slow.
• Startup is slow if the clock is not set, there was a power failure or the AC plug has just been
connected.
• Twenty to 30 seconds after turning on the unit, you can play a disc or start recording to discs other
than DVD-RAM.
• Startup takes time for a few minutes after 5:15 am due to system maintenance of this unit.
—
—
—
—
Takes time to read DVD-
RAM.
• It may take time to read a disc if it is being used for the first time in this unit or it has not been used
for a long time.
Recording, timer recording and copying
Cannot record.
• You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit
can record onto.
6
36
36
RAM -RW(V) +R +R DL +RW
• The write-protect tab on the cartridge is set to PROTECT, or the disc is protected with DVD
Management.
• Some programmes have limitations on the number of times they can be recorded. (CPRM)
• You cannot record when there is not enough space or when the number of titles has reached its
limit. Delete unwanted titles or use a new disc.
• You cannot record on finalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or
DVD-RW (VR format) discs.
• Due to peculiarities of DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW, you
may be unable to record onto them if you either insert and remove the disc or switch the unit on
and off while a disc is loaded, a total of fifty times.
• DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW recorded on this unit may
not be recordable on other Panasonic DVD recorders.
• The disc is unformatted. Format the disc.
49
31, 35, 36
—
—
—
Cannot record from
external equipment.
• Check that the connection is correct.
• Select the input channel (“AV2”, “AV3” or “DV”) for the equipment you have connected.
8–10, 34
—
Timer recording does not
work properly.
• The timer programme is incorrect or different timer programme times overlap. Correct the
programme.
• The unit or the timer programme is not on timer recording standby. (“z” on the unit’s display or the
timer icon in the timer recording list is not on.)
Put the unit and the timer programme on timer recording standby.
• Set the clock.
22
20, 21
VIDEO Plus+ programming
does not work properly.
41
21
Timer recording does not
stop even when [g] is
pressed.
• When this unit is on, press [g]. A dialog appears, so press [w,q] to select “Stop Recording” and
press [ENTER].
• When using the linked timer recording with external equipment, press [EXT LINK]. (“EXT-L”
disappears.)
23
21
The timer programme
remains even after
recording finishes.
• The timer programme remains if set to daily or weekly.
A part or whole of a
recorded title has been
lost.
• If there is a power failure or the plug is disconnected from the household AC mains socket while
recording or editing, the title may be lost or the disc may become unusable. You will have to format
—
RAM -RW(V) +RW
the disc (
programmes or discs.
) or use a new disc. We cannot offer any guarantee regarding lost
The DV automatic
recording function does
not work.
• If images cannot be recorded or if the recording is aborted, check the connections and DV
equipment settings.
• You cannot start recording until the images from the DV equipment appear on the television.
• Recording may not be performed as desired if the time codes on the tape in the DV equipment are
not successive.
34
—
—
• Depending on the equipment, the DV automatic recording may not operate properly.
• You can only record audio/video images on a DV tape.
—
—
RQT8320
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Play
Page
Play fails to start even
when [q] (PLAY) is
pressed.
Play starts but then stops
immediately.
• Insert the disc correctly with the label facing up.
• The disc is dirty.
18
4
6, 7
—
• You tried to play a blank disc or disc unplayable on this unit.
• You tried to play a +RW that needs to be finalized on the equipment used for recording.
• When recording to DVD-RAM using EP ( 8Hours ) mode, play may not be possible on DVD players
that are compatible with DVD-RAM. In this case use EP ( 6Hours ) mode.
• You cannot play discs during DV automatic recording.
39
—
Audio and video
momentarily pause.
• This occurs between playlist chapters.
• This occurs as scenes change during Quick View.
—
—
DVD-Video is not played.
• You have set a ratings level to limit DVD-Video play. Change this setting.
39
Alternative soundtrack and • The languages are not recorded on the disc.
—
subtitles cannot be
selected.
• You may have to use the disc’s menus to select languages.
24
No subtitles.
• Subtitles are not recorded on the disc.
—
• Set “Subtitle” on the on-screen menu to “On”.
28
Angle cannot be changed. • Angles can only be changed during scenes where different angles are recorded.
—
—
You have forgotten your
ratings password.
• While the disc tray is open, press and hold [* REC] and [q x1.3] on the main unit at the same time
for 5 or more seconds (“INIT” will appear on the unit’s display). The ratings level returns to “8”.
Quick View does not work. • This does not work when audio is other than Dolby Digital.
—
—
• This does not work when recording in XP or FR mode.
The resume play function
does not work.
• Memorized positions are cancelled when the unit is turned off or when the tray is opened. The
memorized position on the playlist is also cancelled when the playlist and title are edited.
—
The Video CD picture does • When connecting to Multi-system TV, select “NTSC” in “TV System” in the Setup menu.
43
—
not display properly.
• When connecting to PAL TV, the lower part of the picture cannot be displayed correctly during
search.
Time Slip does not work.
• Time Slip does not work when the unit’s “TV System” settings are different from the title recorded
on the disc.
43
29
When playing PAL disc,
picture distorted.
• Set “Transfer” in Picture menu to “Auto”.
Edit
Cannot format.
• The disc is dirty. Wipe with a damp cloth and then wipe dry.
• You tried formatting a disc that is not compatible with this unit.
4
6, 7
Cannot create chapters.
• The unit writes the chapter information to the disc when you turn it off or remove the disc. The
information is not written if there is an interruption to the power before this.
—
Cannot mark the start point • These operations are not possible with still pictures.
—
—
or the end point during
• You cannot set points if they are too close to each other. You cannot set an end point before a start
“Partial Delete” operation.
point.
Cannot delete chapters.
• When the chapter is too short to delete, use “Combine Chapters” to make the chapter longer.
31
—
The available recording
space doesn’t increase
even after deleting
• Available recording space on DVD-R, DVD-R DL, +R or +R DL does not increase even after
deleting previously recorded titles.
• Available recording space on DVD-RW (DVD-Video format) or +RW increases only when the last
recorded title is deleted. It does not increase if other titles are deleted.
—
—
recordings on the disc.
Cannot create a playlist.
• You cannot select all the chapters at once in a title if the title also includes still pictures. Select
them individually.
To reset this unit
To return all the settings
other than the main ones to
the factory preset.
• Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratings level,
ratings password, Owner ID and time settings return to the factory preset. The timer recording
programmes are also cancelled.
• Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the programmed
channels, time settings, disc language settings, ratings level, ratings password, Owner ID and
remote control code return to the factory presets.
• Press and hold [2 CH] and [CH 1] on the main unit for about 5 seconds. All the settings except for
the ratings level, ratings password, Owner ID and time settings return to the factory preset. The
timer recording programmes are also cancelled.
41
41
—
To reset the ratings level
settings.
• While the disc tray is open, press and hold [* REC] and [q x1.3] on the main unit at the same time
for 5 or more seconds.
—
—
To restore the unit if it
freezes due to one of the
safety devices being
activated.
• Press and hold [8] on the main unit for 10 seconds. (The settings remain.)
RQT8320
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Frames and fields
Frames refer to the single images that constitute the video you see
on your television. Each frame consists of two fields.
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
Component video output
Component signal outputs the colour difference signals (PB/PR) and
luminance signal (Y) separately in order to achieve high fidelity in
reproducing colours. If the television is compatible with progressive
output, a high quality picture can be output because this unit’s
component video output terminal outputs a progressive output
signal.
+
=
Frame
Field
Field
• A frame still shows two fields, so there may be some blurring, but
picture quality is generally better.
• A field still shows less picture information so it may be rougher, but
there is no blurring.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding colour still pictures.
If you select JPEG as the storage system on digital cameras etc.,
the data will be compressed to 1/10–1/100 of its original size. The
feature of JPEG is less deterioration in picture quality considering
the degree of compression.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can
also be multi-channel audio. A large amount of audio information can
be recorded on one disc using this method.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to approximately
one tenth of its size without any considerable loss of audio quality. You
can play MP3 you have recorded onto DVD-R, CD-R and CD-RW.
Down-mixing
This is the process of remixing the multi-channel audio found on
some discs into two channels for stereo output. It is useful when you
want to listen to the 5.1-channel audio recorded on DVDs through
your television’s speakers. Some discs prohibit down-mixing and this
unit can then only output the front two channels.
Pan & Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television (16:9 aspect ratio), so images
often don’t fit regular (4:3 aspect ratio) televisions. Two styles of
picture, “Pan & Scan” and “Letterbox”, deal with this problem.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is good
separation between the channels, so realistic sound effects are
possible.
Pan & Scan: The sides are cut off so the picture
fills the screen.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs. Dynamic range compression
means reducing the gap between the loudest and softest sounds.
This means you can listen at low volumes but still hear dialog clearly.
Letterbox:
Black bands appear at the top and
bottom of the picture so the picture
itself appears in an aspect ratio of
16:9.
Film and video
DVD-Videos are recorded using either film or video. This unit can
determine which type has been used, then uses the most suitable
method of progressive output.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus.
(This unit is compatible with version 2.0 and 1.1.)
Film:
Recorded at 25 frames per second (PAL discs) or 24 frames per
second (NTSC discs). (NTSC discs recorded at 30 frames per
second as well.) Generally appropriate for motion picture films.
Video:
Recorded at 25 frames/50 fields per second (PAL discs) or 30
frames/60 fields per second (NTSC discs). Generally appropriate for
TV drama programmes or animation.
Progressive/Interlace
The PAL video signal standard has 625 (or 576) interlaced (i) scan
lines, whereas progressive scanning, called 625p (or 576p), uses
twice the number of scan lines. For the NTSC standard, these are
called 525i (or 480i) and 525p (or 480p) respectively.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i · 60p
input terminals are progressive compatible.
Finalize
A process that makes play of a recorded CD-R, CD-RW, DVD-R etc.
possible on equipment that can play such media. You can finalize
DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R or +R DL on
this unit.
Protection
You can prevent accidental deletion by setting writing protection or
deletion protection.
After finalizing, the disc becomes play-only and you can no longer
record or edit. However, finalized DVD-RW can be formatted to
become recordable.
RGB
This refers to the three primary colours of light, red (R), green (G),
and blue (B) and also the method of producing video that uses them.
By dividing the video signal into the three colours for transmission,
noise is reduced for even higher quality images.
Formatting
Formatting is the process of making media such as DVD-RAM
recordable on recording equipment.
You can format DVD-RAM, DVD-RW (only as DVD-Video format),
+R, +R DL or +RW on this unit.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analogue signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
When you use a new DVD-RW, +R, +R DL or +RW, it must be
formatted.
Formatting deletes irrevocably all contents.
Thumbnail
This refers to a miniature representation of a picture used to display
multiple pictures in the form of a list.
TIFF (Tag Image File Format)
This is a system used for compressing/decoding colour still pictures.
A common format for storing high quality images on digital cameras
and other devices.
RQT8320
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Recording System
Video
DVD-RAM:
DVD-R:
DVD-R DL (Dual Layer):
DVD Video Recording format
DVD-Video format
Video System:
PAL colour signal, 625 lines, 50 fields
NTSC colour signal, 525 lines, 60 fields
MPEG2 (Hybrid VBR)
DVD-Video format
Recording System:
DVD-RW:
+R
+R DL (Double Layer)
+RW
DVD-Video format
Video In (SECAM/PAL/NTSC):
AV1/AV2 (21 pin), AV3 (pin jack) 1 Vp-p 75 Ω, termination
S-Video In (SECAM/PAL/NTSC):
AV2 (21 pin), AV3 (S terminal) 1 Vp-p 75 Ω, termination
Recording time
Video Out (PAL/NTSC):
Maximum 8 hours (using 4.7 GB disc)
AV1/AV2 (21 pin), Video Out (pin jack) 1 Vp-p 75 Ω, termination
S-Video Out (PAL/NTSC):
AV1 (21 pin), S-Video Out (S terminal) 1 Vp-p 75 Ω, termination
RGB Out (PAL/NTSC):
AV1 (21 pin) 0.7 Vp-p (PAL) 75 Ω, termination
Component video output (NTSC 480p/480i, PAL 576p/576i)
Y: 1.0 Vp-p 75 Ω, termination
XP: Approx. 1 hour
LP: Approx. 4 hours
Recordable discs
DVD-RAM:
SP: Approx. 2 hours
EP: Approx. 6 hours/8 hours
Ver. 2.0
Ver. 2.1/3x–SPEED DVD-RAM Revision 1.0
Ver. 2.2/5x–SPEED DVD-RAM Revision 2.0
for General Ver. 2.0
PB: 0.7 Vp-p 75 Ω, termination
DVD-R:
PR: 0.7 Vp-p 75 Ω, termination
for General Ver. 2.0/4x–SPEED DVD-R Revision 1.0
for General Ver. 2.x/8x–SPEED DVD-R Revision 3.0
for General Ver. 2.x/16x–SPEED DVD-R Revision 6.0
Audio
Recording System:
Audio In:
Dolby Digital 2ch
AV1/AV2 (21 pin), AV3 (pin jack)
for DL Ver. 3.0
Input Level:
Input Impedance:
Audio Out:
Output Level:
Output Impedance:
Digital Audio Out:
Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz
More than 10 kΩ
AV1/AV2 (21 pin), Audio Out (pin jack)
Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz
Less than 1 kΩ
for DL Ver. 3.x/4x–SPEED DVD-R for DL Revision 1.0
DVD-RW:
+R:
Ver. 1.1
Ver. 1.x/2x–SPEED DVD-RW Revision 1.0
Ver. 1.x/4x–SPEED DVD-RW Revision 2.0
Ver. 1.x/6x–SPEED DVD-RW Revision 3.0
Ver. 1.0
Ver. 1.1
Ver. 1.2
Optical terminal (PCM, Dolby Digital, DTS, MPEG)
Television System
Tuner System:
PAL-I
Ver. 1.3
Channel Coverage:
The United Kingdom
Republic of Ireland
for DL Ver. 1.0
Ver. 1.1
Ver. 1.2/4x–SPEED
UHF: CH 21–68
VHF: CH 4–13, A–J
+RW:
UHF: CH 21–68
Playable discs
RF Converter Output:
Not provided
DVD-RAM (DVD Video Recording format), DVD-R (DVD-Video
format, MP3, JPEG), DVD-R DL (Dual Layer) (DVD-Video format),
DVD-RW (DVD-Video format, DVD Video Recording format), +R, +R
DL (Double Layer), +RW, DVD-Video, DVD-Audio,
CD-Audio (CD-DA), Video CD, CD-R/RW (CD-DA, Video CD,
Optical pick-up
System with 1 lens, 2 integration units
(662 nm wavelength for DVDs,
780 nm wavelength for CDs)
LASER Specification
Class 1 LASER Product
Wave Length:
SVCD 1, MP3, JPEG formatted discs), SVCD
1
780 nm (CDs), 662 nm (DVDs)
1
Conforming to IEC62107.
Laser Power:
Quick Start for Recording
No hazardous radiation is emitted with the safety protection
IEEE 1394 Standard, 4 pin: 1 pc
2
1 Sec. Quick Start for Recording on DVD-RAM
DV Input
Others
2
From the power off state, recording on DVD-RAM starts about 1
second after first pressing the Power button and then sequentially
pressing the REC button.
Region Code:
# 2
5 ºC–40 ºC
10 %–80 % RH (no condensation)
AC 220 V–240 V, 50 Hz
Approx. 22 W
Operating temperature:
Operating humidity range:
Power supply:
Power consumption:
Dimensions (W×D×H):
Mass:
430 mm × 316 mm × 58 mm
3.2 kg
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Language code list Enter the code with the numbered buttons.
Abkhazian:
Afar:
6566 Catalan:
6565 Chinese:
6570 Corsican:
8381 Croatian:
6577 Czech:
6582 Danish:
7289 Dutch:
6765 Gujarati:
9072 Hausa:
6779 Hebrew:
7282 Hindi:
7185 Lingala:
7265 Lithuanian: 7684
7387 Macedonian: 7775 Romanian: 8279 Telugu:
7678 Rhaeto-Romance: Tamil:
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8277 Tatar:
Afrikaans:
Albanian:
Ameharic:
Arabic:
Armenian:
Assamese:
Aymara:
7273 Malagasy:
6783 Hungarian: 7285 Malay:
7383 Malayalam: 7776 Sanskrit:
7876 Indonesian: 7378 Maltese:
6978 Interlingua: 7365 Maori:
7771 Russian:
7783 Samoan:
8285 Thai:
8377 Tibetan:
8365 Tigrinya:
6865 Icelandic:
7784 Scots Gaelic: 7168 Tonga:
7773 Serbian: 8382 Turkish:
7782 Serbo-Croatian: 8372 Turkmen:
8378 Twi:
8368 Ukrainian:
7865 Singhalese: 8373 Urdu:
6583 English:
6589 Esperanto: 6979 Irish:
7165 Marathi:
Azerbaijani: 6590 Estonian:
6984 Italian:
7384 Moldavian: 7779 Shona:
7465 Mongolian: 7778 Sindhi:
7487 Nauru:
7578 Nepali:
7583 Norwegian: 7879 Slovenian:
7575 Oriya: 7982 Somali:
7589 Pashto, Pushto:8083 Spanish:
7579 Persian:
7585 Polish:
Bashkir:
Basque:
Bengali; Bangla:
6665 Faroese:
6985 Fiji:
7079 Japanese:
7074 Javanese:
7073 Kannada:
7082 Kashmiri:
7089 Kazakh:
7176 Kirghiz:
7565 Korean:
6869 Kurdish:
6976 Laotian:
Finnish:
7869 Slovak:
8375 Uzbek:
8376 Vietnamese: 8673
6678 French:
6890 Frisian:
6672 Galician:
6682 Georgian:
6671 German:
7789 Greek:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
8379 Volapük:
6983 Welsh:
7065 Sundanese: 8385 Wolof:
8679
6789
8779
8872
7473
8979
9085
8076 Swahili:
8387 Xhosa:
8386 Yiddish:
8476 Yoruba:
8471 Zulu:
7679 Portuguese: 8084 Swedish:
RQT8320
Byelorussian: 6669 Greenlandic: 7576 Latin:
7665 Punjabi:
8065 Tagalog:
8185 Tajik:
Cambodian: 7577 Guarani: 7178 Latvian, Lettish:7686 Quechua:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION!
• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
(Back of product)
• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
(Inside of product)
• For your safety, be sure not to connect or handle the equipment
with wet hands.
• Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
(Ô page 50, Specifications—Others)
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.
-If you see this symbol-
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer
upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your
nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
RQT8320
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
DV automatic recording . . . . . . 34
DVD-RAM, DVD-R, DVD-R DL,
DVD-RW, +R, +R DL, +RW. . . 6, 16
Properties
playlist . . . . . . . . . . . . . . . . . 33
still picture . . . . . . . . . . . . . . 27
title. . . . . . . . . . . . . . . . . . . . 31
Protection
Angle . . . . . . . . . . . . . . . . . . . . . 28
Audio
attribute . . . . . . . . . . . . . . . . 28
language . . . . . . . . . . . . . . . 28
playback. . . . . . . . . . . . . . . . 24
AV-in NR . . . . . . . . . . . . . . . . . . 29
Enter name
disc . . . . . . . . . . . . . . . . . . . . 36
entering text . . . . . . . . . . . . . 43
playlist. . . . . . . . . . . . . . . . . . 33
title . . . . . . . . . . . . . . 20, 21, 31
EXT LINK . . . . . . . . . . . . . . . 23, 41
cartridge . . . . . . . . . . . . . . . 36
disc . . . . . . . . . . . . . . . . . . . 36
title. . . . . . . . . . . . . . . . . . . . 31
Change Thumbnail. . . . . . . . . . 31
Channel
Q Link . . . . . . . . . . . . . . . . . . . . 38
Quick Start . . . . . . . . . . . . . . . . 18
Quick View . . . . . . . . . . . . . . . . 25
audio . . . . . . . . . . . . . . . . . . 28
settings. . . . . . . . . . . . . . 12, 42
Chapter . . . . . . . . . . . . . . . . 25, 30
Chasing playback. . . . . . . . . . . 19
Child Lock. . . . . . . . . . . . . . . . . 38
Cleaning
disc. . . . . . . . . . . . . . . . . . . . . 4
lens . . . . . . . . . . . . . . . . . . . . 4
main unit . . . . . . . . . . . . . . . . 4
Clock settings. . . . . . . . . . . . . . 41
Close First Layer . . . . . . . . . . . 37
Connection
Finalize. . . . . . . . . . . . . . . . . 37, 49
Flexible Recording . . . . . . . . . . 19
Format disc . . . . . . . . . . . . . . . . 36
FR (Flexible Recording)
Mode. . . . . . . . . . . . . . . . . . . 17, 19
FUNCTIONS window. . . . . . . 2, 29
Ratings level. . . . . . . . . . . . . . . 39
Recording
Direct TV Recording . . . . . . 38
DV automatic recording . . . . 34
External Link . . . . . . . . . . . . 23
Flexible Recording. . . . . . . . 19
mode . . . . . . . . . . . . . . . . . . 17
timer. . . . . . . . . . . . . . . . . . . 20
Remote control code. . . . . . . . 15
Repeat play. . . . . . . . . . . . . . . . 28
Resetting channel setting. . . . 42
Resume play function . . . . . . . 25
RGB. . . . . . . . . . . . . . . . . . . 40, 49
JPEG . . . . . . . . . . . . . . . 26, 27, 49
Language
code list. . . . . . . . . . . . . . . . . 50
soundtrack . . . . . . . . . . . 28, 39
subtitle . . . . . . . . . . . . . . 28, 39
aerial . . . . . . . . . . . . . . 8, 9, 10
amplifier, system component . 11
AV3 input terminals . . . . . . . 34
DV IN terminal . . . . . . . . . . . 34
satellite/digital terrestrial
Manual Skip. . . . . . . . . . . . . . . . 25
Menu
JPEG . . . . . . . . . . . . . . . . . . 27
MP3 . . . . . . . . . . . . . . . . . . . 26
on-screen . . . . . . . . . . . . . . . 28
Setup . . . . . . . . . . . . . . . . . . 39
Mode
recording. . . . . . . . . . . . . . . . 17
still mode. . . . . . . . . . . . . . . . 39
MP3. . . . . . . . . . . . . . . . . . . . 26, 49
receiver . . . . . . . . . . . . . . . . . 9
television . . . . . . . . 8, 9, 10, 11
video cassette recorder . 10, 34
Copy (playlist) . . . . . . . . . . . . . 33
Copying
Setup menu . . . . . . . . . . . . . . . 39
Shipping Condition . . . . . . . . . 41
Simultaneous rec and play . . . 19
Soundtrack. . . . . . . . . . . . . . . . 28
Status messages . . . . . . . . . . . 29
Subtitle . . . . . . . . . . . . . . . . . . . 28
DV automatic recording . . . . 34
from a video cassette
recorder . . . . . . . . . . . . . . . . 34
Manual recording . . . . . . . . . 34
CPRM. . . . . . . . . . . . . . . . . . . . . 49
Create Chapter . . . . . . . 25, 31, 33
Create playlists. . . . . . . . . . . . . 32
Create Top Menu . . . . . . . . . . . 37
Teletext . . . . . . . . . . . . . . . . . . . 18
Thumbnail . . . . . . . . . . . . . . . . 31
TIFF . . . . . . . . . . . . . . . . 26, 27, 49
Time Slip. . . . . . . . . . . . . . . . . . 25
Timer recording . . . . . . . . . . . . 20
Transfer. . . . . . . . . . . . . . . . . . . 29
Tuning
manual. . . . . . . . . . . . . . . . . 42
settings . . . . . . . . . . . . . 12, 42
TV aspect . . . . . . . . . . . . . . 14, 40
TV System (PAL/NTSC) . . . . . . 43
Noise reduction (NR)
AV-in NR . . . . . . . . . . . . . . . . 29
Playback NR . . . . . . . . . . . . . 29
On-screen
Default Settings . . . . . . . . . . . . 41
Delete
menus. . . . . . . . . . . . . . . . . . 28
status messages. . . . . . . . . . 29
Owner ID . . . . . . . . . . . . . . . 12, 41
all titles. . . . . . . . . . . . . . . . . 36
chapter. . . . . . . . . . . . . . 31, 33
playlist . . . . . . . . . . . . . . . . . 33
title . . . . . . . . . . . . . . . . . 31, 35
Delete Navigator. . . . . . . . . . . . 35
Dialog Enhancer. . . . . . . . . . . . 29
Direct Navigator . . . . . . . . . . . . 24
Direct TV Recording. . . . . . . . . 38
Divide Title . . . . . . . . . . . . . . . . 31
Partial Delete . . . . . . . . . . . . . . . 31
PCM Down Conversion. . . . . . . 40
Picture settings. . . . . . . . . . 29, 39
Playback NR . . . . . . . . . . . . . . . 29
Playlist . . . . . . . . . . . . . . . . . . . . 32
Progressive . . . . . . . 14, 29, 40, 49
VIDEO Plus+. . . . . . . . . . . . . . . 20
V.S.S.. . . . . . . . . . . . . . . . . . . . . 29
Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
“DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital
Theater Systems, Inc.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VIDEO Plus+ system is manufactured under license from
Gemstar Development Corporation.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
En
RQT8320-1B
H1205XB1026
Download from Www.Somanuals.com. All Manuals Search And Download.
|