Oricom Cordless Telephone ECO710 User Manual

Oricom DECT Digital  
Cordless Telephone  
USER GUIDE  
eco710  
eco71  
DECT Digital Cordless Phone  
with answering system  
DECT Digital Cordless Phone  
Keep this user guide for future reference. Always retain your proof of purchase in case of  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
SAFETY INFORMATION  
Because the phone works by sending radio  
signals between base station and handset,  
wearers of hearing aids may experience  
interference in the form of a humming noise.  
IMPORTANT  
Avoid exposure of this telephone to moisture  
or liquid.  
Your phone can interfere with electrical  
equipment such as answering machines, TV  
and radio sets, clock radios and computers if  
placed too close. It is recommended that you  
position the base unit at least one metre from  
such appliances.  
To prevent electric shock, do not open the  
handset or base cabinet.  
Avoid metallic contact (e.g. metal clips, keys)  
between the battery contacts and charging  
conductors.  
There is a slight chance that the telephone  
could be damaged by an electrical storm. It is  
recommended that users unplug the phone  
from the mains supply and telephone socket  
during a storm.  
This telephone complies with applicable  
safety requirements for exposure to radio  
waves (EMR). The mean power of this  
telephone does not exceed 20mW limit at  
which point testing is required.  
Do not use the handset in an explosive hazard  
area such as where there is gas leaking.  
Privacy of communications may not be  
ensured when using this telephone.  
Follow the local regulations regarding the  
disposal of your packing materials, exhausted  
batteries and used phone. Wherever possible,  
recycle those materials.  
The earpiece of the handset may attract small  
metal objects such as staples and pins. Care  
should be taken when placing the handset  
near these items.  
This phone should not be used near intensive  
care medical equipment. Persons with  
pacemakers should consult their Doctor or  
cardiologist before using this phone.  
This telephone is not designed for making  
emergency telephone calls when the mains  
power fails. Always have a corded phone  
available to be able to make and receive calls  
to emergency services if the mains power fails.  
Clean with a dry, soft, lint-free cloth. Never  
use cleaning agents, particularly aggressive  
solvents.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 SAFETY INFORMATION  
Do not use your telephone during an electrical  
storm thunderstorm as it is possible to get an  
electric shock. Refer to information contained  
in White pages directory.  
This phone is designed for connection to  
a PSTN telephone line or an analogue  
extension port of a PBX system. If you  
connect this device to a digital extension of a  
PBX, damage may result to the PBX.  
CAUTION  
Use only the mains adaptors supplied with this  
product. Incorrect adaptor polarity or voltage can  
seriously damage the unit.  
Adaptor for base unit and charger:  
Base Unit power supply – Input: 100-240VAC  
50/60Hz Output: 6V 0.5A  
!
Ext Charger power supply – Input 100-240VAC  
50Hz Output: 6V 150mA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
GETTING STARTEd  
Getting started  
IMPORTANT  
The base station must be plugged into the  
mains power at all times. Do not plug the  
telephone line cord into the wall socket until  
the handset is fully charged. Only use the  
power and telephone cables supplied with  
the product.  
Location  
!
You need to place the base unit within 2 metres of the  
mains power socket and telephone socket so that the  
cables will reach. Make sure it is at least 1 metre away  
from other electrical appliances to avoid interference.  
Your cordless phone works by sending radio signals  
between the handset and base. The strength of the  
signal depends on where you site the base. Putting it  
as high as possible ensures the best signal.  
Battery low warning  
If the  
icon flashes in the display, you will need to  
Handset range  
recharge the handset before you can use it again.  
The range is up to 300 metres outdoors when there  
is a clear line of sight between the base and handset.  
Any obstruction between the base and handset will  
reduce the range significantly. With the base indoors  
and handset either indoors or outdoors, the range will  
normally be up to 50 metres. Thick stone walls can  
severely affect the range.  
During charging, the  
icon in the display will scroll.  
Battery performance  
In ideal conditions, fully charged batteries should give  
about 10 hours talk time or 100 hours standby time  
from a single charge.  
Note that new batteries do not reach full capacity until  
they have been in normal use for several days.  
Signal strength  
The icon on your handset indicates when you are in  
range. When out of range of the base the icon flashes  
and the handset gives an out-of range warning tone  
every minute. This tone is repeated until you move  
back into range.  
The charge capacity of rechargeable batteries will  
reduce with time as they wear out, giving the handset  
less talk/standby time. Eventually they will need to be  
replaced.  
Batteries and handsets may become warm during  
charging. This is normal.  
If you move out of range during a call, the telephone  
call will be disconnected. Move back within range  
before you make any further calls. The handset will  
automatically re-connect to the base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 GETTING STARTEd  
Tip!  
WARNING  
It is good practice to put the cordless handset on the  
charging cradle when it is not in use to ensure that  
the handset is always fully charged.  
Observe the proper polarity, or direction,  
of any battery. Reverse insertion of  
the battery cell can result in leakage or  
explosion.  
!
WARNING  
Remove the batteries if you do not plan to  
use the product for several months at a time.  
DO NOT USE STANDARD/ALKALINE  
BATTERIES IN THIS PRODUCT, AS  
!
Follow the local regulations regarding  
the disposal of your packing materials,  
exhausted batteries and used phone.  
Wherever possible, recycle those materials.  
THERE IS A RISK OF EXPLOSION AND/  
OR INJURY. ONLY USE THE Ni-MH  
RECHARGEABLE BATTERIES SPECIFIED  
IN THIS USER GUIDE. CONTACT ORICOM  
FOR REPLACEMENT BATTERIES.  
RISK OF EXPLOSION IF BATTERY IS  
REPLACED BY AN INCORRECT TYPE.  
Pack contents  
Never use non-rechargeable batteries.  
Use recommended type supplied with this  
product.  
Depending on the model you have purchased this  
pack should contain the following items:  
If any of these are missing, please contact Oricom  
directly.  
Never use alkaline or lithium batteries.  
Do not dispose of the batteries in a fire, as  
they can explode.  
Single Twin  
Triple  
Do not open or mutilate the battery.  
Released electrolyte is corrosive and can  
cause damage to the eyes or skin. It can  
be toxic if swallowed.  
Base unit  
1
1
0
1
1
1
1
2
1
2
1
1
1
3
2
3
1
1
Cordless handsets  
Charging cradle  
Power adaptors  
Line cord  
Avoid contact with metal objects when  
handling the battery. These objects  
could short out the batteries or cause the  
conductor to overheat resulting in burns.  
User guide  
Do not attempt to recharge the battery cell  
by heating it. Sudden release of battery  
electrolyte can cause burns or irritation to  
the eyes or skin.  
Handset Rechargeable  
Ni-MH 1.2V 400mAh  
Batteries  
2
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
GETTING STARTEd  
Purchasing additional handsets  
You may expand your cordless system by adding  
more handsets (eco7150). These can be purchased  
separately from the retailer where you purchased the  
product, or directly from Oricom (Australia)  
TELEPHONE  
WALL SOCKET  
The eco71 and eco710 can accommodate a total of 4  
cordless handsets.  
MICROFILTER  
Connecting the base station  
If you have a Broadband line  
If you connect your telephone to a line with a  
broadband conne ction, you must connect an in  
line filter (not supplied) between the telephone  
socket and your phone base to ensure that your  
broadband and eco71&eco710 will work properly.  
V
C D  
If you do not install the filter you will experience  
interference on the cordless phone and your  
Broadband may suffer dropouts. Please refer to  
the user guide of the in line filter for installation.  
Connect the base station as illustrated in the  
diagram. For reasons of safety, only use the power  
adaptor and telephone connection line cord supplied.  
In a home with broadband, every telephone, fax  
or answering system must have a in-line filter  
connected, not just the one at the telephone point  
that your modem is connected to.  
Inserting the batteries  
1) Open the battery compartment cover. Install  
the AAA rechargeable batteries into handset  
in accordance with the polarity marked in the  
battery compartment.  
Additional in-line filters can be purchased from  
electronic stores.  
2) Close the battery compartment cover, sliding  
it into place and pressing firmly to make sure  
it is secure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 GETTING STARTEd  
Charging the batteries  
Interference  
Before the handset is used for the first time, insert it  
in the base/charging station for at least 14 hours.  
If the sound quality gets worse as you move around  
while on a call, this is probably caused by interference  
between the handset and the base unit, perhaps  
because you are too near to another phone or other  
electrical equipment. Move to a different position to  
clear the interference. If you do not move, it might  
cause a short break or your call may be cut off.  
The handset warms up during the charging process.  
This is normal and does not represent a risk. Do not  
charge the handset with charging units from other  
manufacturers. The battery charge status is indicated  
in the display. When the battery charge has reached its  
lower limit value, the battery icon flashes in the display.  
Checking your answering machine  
messages remotely  
Setting the time and date on the  
handset  
When used up for the first time, the handset does not  
show the correct time (e.g. for entries in the call list/  
answering machine). The date and time are set using  
the DATE TIME menu option.  
1. From another phone, dial home. The  
answering machine answers and starts playing  
your greeting message.  
2. While the greeting is playing, press # key  
on the phone you used to dial and enter the  
remote access code* (which is the same as  
your master PIN code).  
Setting the display language  
The display language can be set to one of the 9  
different languages available. When delivered, the  
language is set to ENGLISH. Change the setting  
using the HANDSET > LANGUAGE menu option.  
If the answering machine is turned off, you must  
change your master PIN from its default 0000,  
before you can use the remote access feature.  
3. If the remote access code is correct, a  
confirmation beep can be heard.  
Radio signals between handset and  
base unit  
4. Press key 2 to start message playback.  
To use your handset and base unit together, you must  
be able to maintain a radio link between them. Be  
aware that any large metal objects, like a refrigerator,  
a mirror, filing cabinet, etc, between the handset and  
the base unit may block the radio signal. Other solid  
structures, like walls, may reduce the signal strength.  
5. When you are finished listening to your  
messages, press the Hang up/exit button to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
PhONE FuNCTION KEYS  
Handset  
Phone Function Keys  
1
2
Earpiece  
The buttons in this operating manual are depicted  
with a uniform contour. Therefore, slight deviations  
in the appearance of the symbols on the telephone  
buttons compared to those shown here are possible.  
OK button  
-
Select a menu entry  
3
NAVIGATION button  
-
-
Up to increase volume and view CID  
Down to decrease volume and access  
Phonebook  
1
4
TALK button  
-
-
Make a call  
Accept a call  
8
5
6
7
Menu button  
Access to main menu  
[*] button  
-
-
Long press to activate or deactivate the key lock  
2
9
10  
3
Mute button  
4
-
Mute/unmute the microphone  
11  
5
12  
8
Display  
9
BACK button  
-
-
-
Cancel a menu entry  
Backspace the digit (s) or character (s)  
13  
14  
15  
Press and hold to toggle between handset  
name and date/time in standby mode  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 PhONE FuNCTION KEYS  
10 END button  
-
-
-
End a call  
Press and hold to turn the handset on/off  
Exit the menu/operation  
11 R (Recall button)  
V C D  
12 Redial button  
-
Enter redial list and dial the recent number  
13 [#] button  
handset locator button  
-
-
Insert a pause.  
Long press to turn the ringer on/off  
14 INT button  
-
-
Make an intercom call  
Make a conference call  
15 Microphone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
PhONE FuNCTION KEYS  
Answering machine operation (eco710 ONLY)  
You can use the keys on the base station to perform the basic functions of the answering machine.  
1
2
4
5
8
6
3
7
1
2
3
Answering machine /in use indicator  
Turn the answering machine on/off  
5
6
7
8
Skip to next message  
Decrease speaker volume  
Play/Stop message playback  
Delete current message, long press  
to delete all read messages  
Go back to previous message or replay current  
message  
4
Increase speaker volume  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 WhAT ThE ICONS MEAN?  
What the icons mean?  
Icon  
Name  
Description  
Battery Charge Level Indicates battery is fully discharged.  
Battery Charge Level Indicates battery is fully charged.  
Indicates that an external call is connected or held.  
Icon blinks when receiving an incoming call.  
Call  
Message  
Caller display  
Phonebook  
Indicates you have a new Voice Mail message.  
Indicates you have new missed calls, or the call log is being viewed.  
Displays when the phonebook is accessed.  
Alarm  
Displays when the alarm clock is activated.  
Ringer Off  
Displays when ringer volume is turned off.  
Indicates that the handset is registered and within range of the base station.  
Icon blinks when the handset is out of range or is searching for a base.  
Icon blinks when the handset is out of range or is searching for a base.  
Signal Level  
Tam  
Slowly Blinking to indicate new TAM message(s)  
Fast blinking to indicate TAM is full  
Tam off to indicate TAM off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
YOuR TELEPhONE OPERATIONS  
Set time and date  
Your Telephone Operations  
Note:  
Switching on/off  
If you subscribe to the Caller Display service,  
the time and date will be set automatically  
when you receive a call, but you may still need  
to set the correct year.  
Press and hold the END button for more than 2  
seconds to switch on/off the handset in standby mode.  
You can switch the handset off and save battery  
charge.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
CLOCK&ALARM and then press OK key to  
select.  
Note:  
When the handset is OFF, it cannot be used  
for making calls including emergency calls.  
There will be no ringing during an incoming  
call. To answer a call, you will need to switch  
it back on. It may take some time for the  
handset to re-establish a radio link with the  
base unit.  
3. Press OK key to select DATE/TIME. The last  
stored date is displayed. Enter the current  
date (YY-MM-DD), press OK, then enter the  
time (HH-MM).  
4. Press the Navigation key to select AM or PM  
(if the time is in 12 HOURS format) and then  
press OK key to confirm. A confirmation beep  
is played.  
To lock/unlock the keypad  
Press and hold the key for 1 second to lock/unlock  
the keypad in standby mode.  
Change your handset’s name  
1. Press MENU key to enter menu selection.  
Note:  
2. Press the Navigation key to select  
PERSONAL SET and then press OK key to  
select.  
Incoming calls can still be answered even  
if the keypad was locked.  
3. Press the Navigation key to select HANDSET  
NAME and then press OK key to select. The  
current handset name is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 YOuR TELEPhONE OPERATIONS  
4. Press BACK/CLEAR key to delete the  
Direct dialling  
Press TALK key to take the line and then dial the  
characters one by one.  
number (maximum 24 digits).  
Enter the new name (maximum 10 characters) and  
press OK key to confirm. A confirmation beep is  
played.  
Call from redial list  
Press REDIAL key in standby mode.  
Change the display language  
Press the Navigation key to an entry in the redial list  
and then press TALK key.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
PERSONAL SET and then press OK key to  
select.  
Call from the call log  
Press CALL LOG (UP) key in idle mode.  
3. Press the Navigation key to select  
Press the Navigation key to an entry in the call list  
and then press TALK key.  
LANGUAGE and then press OK key to select.  
4. Press the Navigation key to your desired  
language and press OK key to confirm. A  
confirmation beep is played.  
Note:  
You need to subscribe to Caller Line Identification  
service to be able to see the caller’s number or  
name in the call log.  
Once the display language is set, the option menus  
on the handset will switch to display in the selected  
language immediately.  
Call from the phonebook  
Press PHONEBOOK (DOWN) key in idle mode.  
Make and answer calls  
Make a call  
Press the Navigation key to an entry in the  
phonebook and then press TALK key.  
Pre-dialling  
Dial the number (maximum 24 digits) and then press  
TALK key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
YOuR TELEPhONE OPERATIONS  
Answer and end a call  
Paging  
1. When the phone rings, press TALK key.  
The paging feature enables you to locate a missing  
handset if the handset is in range and contains  
charged batteries.  
2. To end a conversation, press END button.  
WARNING:  
Press HANDSET LOCATOR key located at the back  
of the base station. All the registered handsets start  
to ring.  
When the handset rings during an  
incoming call, please do not hold  
the handset too close to your ear as  
the volume of the ringing tone may  
damage your hearing.  
!
Once retrieved, press any key on the handset or the  
HANDSET LOCATOR key again to end the paging.  
Call waiting  
IMPORTANT NOTE: You can simply place the  
handset back on its base station or charger pod to  
end the call.  
If you have subscribed to Call Waiting service, the  
earpiece will emit a beep tone to inform you that  
there is a second incoming call. The number or name  
of the second caller will also be displayed on your  
phone if you have subscribed to Caller ID. Please  
contact your network provider for more information  
on this service.  
Make sure that you have not deactivated the auto  
hang-up feature.  
Adjust the earpiece volume  
During a call, press the Navigation key to select from  
VOLUME 1 to VOLUME 3.  
Handset Tone  
Set the ring volume  
Mute/unmute microphone  
There are 5 ringer volume options (OFF, LEVEL 1,  
LEVEL 2, LEVEL 3 and LEVEL 4). The default level  
is LEVEL 2.  
When the microphone is muted, the handset displays  
MUTE ON, and your caller cannot hear you.  
During a call, press the MUTE key to turn on/off the  
microphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 YOuR TELEPhONE OPERATIONS  
1. Press MENU key to enter menu selection.  
Activate/deactivate key tone  
A single tone is emitted when a key is pressed. You  
can enable or disable the key tone. By default, the  
key tone is ON.  
2. Press the Navigation key to select  
PERSONAL SET and then press OK key to  
select.  
1. Press MENU key to enter menu selection.  
3. Press the Navigation key to select HANDSET  
TONE and then press OK key to select and  
show RING VOLUME. Press the OK key again  
to select.  
2. Press the Navigation key to select PERSONAL  
SET and then press OK key to select.  
3. Press the Navigation key to select HANDSET  
4. Press the Navigation key to your desired  
volume level and then press OK key to  
confirm. A confirmation beep is played.  
TONE and then press OK key to select.  
4. Press the Navigation key to select KEY BEEP  
and then press OK to select.  
5. Press the Navigation key to select ON or  
OFF and then press OK key to confirm. A  
confirmation beep is played.  
Set the ring melody  
There are 10 ring melodies available on your  
handset.  
1. Press MENU key to enter menu selection.  
Activate/deactivate auto hang-up  
2. Press the Navigation key to select  
PERSONAL SET and then press OK key to  
select.  
This function enables you to end a call automatically  
by simply placing the handset on the base station. By  
default, the Auto Hang up feature is ON.  
3. Press the Navigation key to select HANDSET  
1. Press MENU key to enter menu selection.  
TONE and then press OK key to select.  
2. Press the Navigation key to select PERSONAL  
4. Press the Navigation key to select RING  
SET and then press OK key to select.  
TONES and then press OK to select.  
5. Press the Navigation key to your desired  
melody and then press OK key to confirm. A  
confirmation beep is played.  
Set date/time format  
You can set your preferred date/time format for your  
phone. The default format is DD/MM and 24 HOURS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
YOuR TELEPhONE OPERATIONS  
Set time format  
Set alarm  
1. Press MENU key to enter menu selection.  
The handset has an alarm clock feature, and when  
the alarm is set, it is shown on the handset display.  
2. Press the Navigation key to select  
CLOCK&ALARM and then press OK key to  
select.  
3. Press the Navigation key to select SET  
FORMAT and then press OK key to select.  
4. Press OK key to enter TIME FORMAT. The  
When the alarm time is reached, the display flashes  
--ALARM-- and the alarm melody is played for 1  
minute or until any handset key is pressed.  
If the alarm is set for ON DAILY and the alarm will  
sound again on the next day.  
current setting is displayed.  
If the alarm was set for ON ONCE, the will be turned  
off.  
5. Press the Navigation key to select 12 HOURS  
or 24 HOURS and then press OK key to  
confirm. A confirmation beep is played.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
CLOCK&ALARM and then press OK key to  
select.  
Set date format  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
CLOCK&ALARM and then press OK key to  
select.  
3. Press the Navigation key to select ALARM  
and then press OK key to select.  
4. Press the Navigation key to select OFF, ON  
ONCE or ON DAILY and then press OK key  
to confirm.  
3. Press the Navigation key to select SET  
FORMAT and then press OK key to select.  
4. Press the Navigation key to select DATE  
FORMAT and then press OK key to select.  
The current setting is displayed.  
If you select ON ONCE or ON DAILY, enter  
the time (HH-MM) for the alarm and press the  
UP/DOWN key to select AM or PM if the time  
is in 12 HOURS format.  
5. Press the Navigation key to select DD/MM  
or MM/DD and then press OK key to confirm.  
A confirmation beep is played.  
5. Press OK key to confirm. A confirmation beep  
is played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 YOuR TELEPhONE OPERATIONS  
Set alarm tone  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
CLOCK&ALARM and then press OK key to  
select.  
3. Press the Navigation key to select ALARM  
TONE and then press OK key to select.  
4. Press the Navigation key to select MELODY  
1, MELODY 2 or MELODY 3 and then press  
OK key to confirm. A confirmation beep is  
played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
uSING YOuR PhONEBOOK  
Press OK key to confirm the name entry.  
Using your phonebook  
5. Enter the number of the contact (maximum  
24 digits) and then press OK key to confirm.  
A confirmation beep is played.  
Your phone can store up to 20 phonebook memories.  
Each phonebook entry can have a maximum of 24  
digits for the phone number and 12 characters for  
name.  
You cannot store a new phonebook entry when  
the memory is full. In this case, you have to delete  
existing entries to make space for new entries.  
When storing the number, enter the full number  
including the STD (area) code if you subscribe to  
caller display, otherwise it will not display the name  
when there is an incoming call.  
How to enter characters?  
When you select a field in which you can enter text,  
you can enter the letters that are printed on the keys  
by pressing the relevant key once or several times.  
For example, press 2 once to insert the letter ‘A’,  
press 2 twice to insert the letter B, and so on...  
Spaces and other symbols can be entered using the  
1 or 0 key.  
Access phonebook  
1. Press PHONEBOOK (DOWN) key in standby  
mode to browse the phonebook entries.  
Alternatively, you can press the MENU key,  
to display PHONEBOOK and then press OK  
key to select.  
Store a contact in the phonebook  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select LIST and  
2. Press the Navigation key to select  
PHONEBOOK and then press OK key to  
select.  
then press OK key to confirm.  
The phonebook entries will be listed in  
alphabetical order, and you can press  
Navigation key to scroll through the stored  
entries.  
3. Press OK key again to enter NEW ENTRY.  
4. Enter the name of the contact (maximum 12  
3. Press OK key to view the details of the  
characters).  
selected entry.  
To edit, press BACK key to delete the last  
character entered.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 uSING YOuR PhONEBOOK  
Instead of pressing the Navigation key to browse  
the phonebook entries, you can press the numeric  
key corresponding to the first letter of the entry you  
wish to locate. For example, pressing 2 will show  
the entries starting with A.  
3. Press the Navigation key to select DELETE  
and then press OK key to select.  
4. Press the Navigation key to select an entry  
to delete and then press OK key.  
5. Press OK k e y a g a i n t o c o n f i r m .  
A
Pressing 2 again will show the entries starting with  
confirmation beep is played.  
B, and so on...  
Delete all entries from the phonebook  
list  
Edit a phonebook entry  
1. Press MENU key to enter menu selection.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
2. Press the Navigation key to select  
PHONEBOOK and then press OK key to select.  
PHONEBOOK and then press OK key to select.  
3. Press the Navigation key to select EDIT  
3. Press the Navigation key to select DELETE  
ENTRY and then press OK key to select.  
ALL and then press OK key to select.  
4. Press the Navigation key to select an entry  
4. Press OK key again to confirm. A confirmation  
to edit and then press OK key.  
beep is played.  
The current name is displayed.  
Edit the name and then press OK key to  
confirm.  
Direct access memory  
There are 2 direct access memories (Keys 1 & 2) in  
addition to the phonebook memory. A long press on  
the keys in standby mode will automatically dial the  
stored phone number.  
5. Edit the number and then press OK key to  
confirm. A confirmation beep is played.  
Delete a phonebook entry  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
PHONEBOOK and then press OK key to  
select.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
uSING YOuR PhONEBOOK  
Add/edit direct access memory  
Delete direct access memory  
1. Press MENU key to enter menu selection.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
PHONEBOOK and then press OK key to  
select.  
2. Press the Navigation key to select  
PHONEBOOK and then press OK key to select.  
3. Press the Navigation key to select DIRECT  
3. Press the Navigation key to select DIRECT  
MEM. And then press OK key to select.  
MEM. And then press OK key to select.  
4. Press the Navigation key to select KEY 1 or  
4. Press the Navigation key to select KEY 1 or  
KEY 2 and then press OK key.  
KEY 2 and then press OK key.  
The stored name is displayed (or NO  
NUMBER if it is already empty).  
The stored name is displayed, or NO  
NUMBER if it is empty.  
5. Press MENU key to enter direct memory  
If there is no number stored for the selected  
key or if you want to change the name or  
number currently stored, press MENU key  
to enter direct memory menu to add/edit the  
name or number.  
menu.  
6. Press the Navigation key to select DELETE  
and then press OK key to select.  
Press OK key again to confirm. A confirmation  
beep is played.  
5. Press the Navigation key to select EDIT  
NUMBER and then press OK key to select.  
The display shows the currently stored name  
or ENTER NAME if there is no number  
stored. Edit or enter the name you want and  
then press OK key. The display shows the  
currently stored number or ENTER NUMBER  
if there is no number stored. Edit or enter the  
number you want and then press OK key to  
confirm. A confirmation beep is played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 uSING ThE REdIAL LIST  
Delete a redial number  
Using the redial list  
1. Press REDIAL key in standby mode to go to  
The redial list stores the last 5 numbers dialed. A  
maximum of 24 digits can be displayed for each  
entry.  
the redial list.  
2. Press the Navigation key to select an entry  
and then press MENU key.  
3. Press the Navigation key to select DELETE  
Access redial list  
and then press OK key to select.  
1. Press REDIAL key in standby mode and  
press Navigation key to browse the redial  
list. The last number dialed will appear first in  
the redial list.  
4. Press OK key again to confirm. A confirmation  
beep is played.  
Delete the redial list  
2. Press OK key to view the details of the  
1. Press REDIAL key in standby mode to go to  
selected entry.  
the redial list.  
2. Press the MENU key.  
Save a redial number into the  
phonebook  
3. Press the Navigation key to select DELETE  
ALL and then press OK key to select.  
1. Press REDIAL key in standby mode to go to  
4. Press OK key again to confirm. A confirmation  
the redial list.  
beep is played.  
2. Press the Navigation key to select an entry.  
3. Press MENU key to display SAVE NUMBER,  
then press OK key to display  
ENTER NAME. Enter the name of the contact  
(maximum 12 characters) and then press OK  
key to save the entry, and return the display  
to the redial list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
uSING ThE CALL LOG  
1. Press OK key to display more details of the  
Using the call log  
call, including the date and time.  
Save call list entry into the phonebook  
2. Press CALL LOG (UP) key in standby mode  
to go to the call list.  
3. Press the Navigation key to select an entry  
and then press MENU key.  
4. Press the Navigation key to select SAVE  
To receive Caller ID you may need to contact your  
telephone service provider, and they will inform you also  
of any charges for it. Caller ID lets you see the phone  
numbers of your callers on the handset display, before  
you answer and in your Call Log afterwards. The Call  
Log stores the last 10 external calls, whether or not you  
answered the call, so you can call them back later.  
NUMBER and then press OK key to select.  
Only the most recent call is saved if there are repeat  
calls from the same number. When the Call Log is  
full, the next new call will replace the oldest entry.  
(Enter the name of the contact (maximum 12  
characters) and then press OK key to confirm.  
If you've got a new call in the Call Log, the Caller  
Display icon will appear on the handset display.  
Delete a Call Log entry  
1. Press CALL LOG (UP) key in standby mode  
If the received number is the same as one in your  
phonebook, the name from the phonebook will  
display as well as the number.  
to go to the call list.  
2. Press the Navigation key to select an entry  
and then press MENU key.  
If a call is from someone who withheld their number,  
the display will show WITHHOLD ID.  
3. Press the Navigation key to select DELETE  
and then press OK key to select.  
If the call is from someone whose number is unavailable,  
or if you have not subscribed to Caller ID but have set  
the date and time, the display will show CALLING when  
it is received and UNAVAILABLE in the Call Log.  
(Press OK key again to confirm. A confirmation  
beep is played.)  
Delete all entries in the Call Log  
1. Press CALL LOG (UP) key in standby mode  
Access call log  
to go to the call list.  
Press CALL LOG (UP) key in standby mode and  
press Navigation key to browse the call list. The  
calls are displayed in chronological order with the  
most recent call at the top of the list.  
2. Press the MENU key.  
3. Press the Navigation key to select DELETE  
ALL and then press OK key to select.  
(Press OK key again to confirm. A confirmation  
beep is played.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANSWERING MAChINE OPERATION  
BY hANdSET (ECO710 ONLY)  
22  
The outgoing message  
Answering machine operation  
by handset (eco710 ONLY)  
The model is supplied with two predefined outgoing  
messages (OGM) used for the different answer modes.  
There are 2 answer modes available: Answer Only  
and Answer & Record.  
By default, the answer mode is ANSW.&RECORD,  
which allows a caller to leave a message on the  
answering machine. This can be changed to  
ANSWER ONLY mode, which does not allow callers  
to leave any messages on the answering machine.  
You can use the answer machine menu on the  
handset to access and change the settings for all the  
answering machine functions.  
Turn the answering machine on or off  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select ANSW  
MACHINE and then press OK key to select.  
3. Press the Navigation key to select ANSW.  
ON/OFF and then press OK key to select.  
4. Press the Navigation key to select ON or OFF  
and then press OK key to confirm.  
5. A confirmation beep is played. Press END key  
Set the answer mode  
1. Press the MENU key to enter menu selection.  
2. Press the Navigation key to select ANSW  
MACHINE and then press OK key to select.  
3. Press the Navigation key to select ANSWER  
MODE and then press OK key to select.  
to go back to standby mode.  
4. Press the Navigation key to select ANSWER  
ONLY or ANSW.&RECORD and then press  
OK key to confirm.  
You can also turn the answering machine on or off  
by pressing the ON/OFF key on the base.  
If the answering machine is turned off and the  
master PIN is still set at its default 0000, the  
answering machine will not answer to any incoming  
ringing, but if the master PIN has been changed, it  
will answer after 10 rings to allow remote access.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANSWERING MAChINE OPERATION  
BY hANdSET (ECO710 ONLY)  
23  
Record a personalized outgoing  
message  
Playback and delete messages  
The last recorded message is played first via the  
loudspeaker on base.  
You can choose to replace the predefined  
OGM with your own pre-recorded personalized  
messages.  
Old messages cannot be played again until after all  
new messages have been played.  
1. Press the MENU key to enter menu selection.  
2. Press the Navigation key to select ANSW  
Playback recorded messages  
1. Press the MENU key to enter menu selection.  
MACHINE and then press OK key to select.  
2. Press the Navigation key to select ANSW  
3. Press the Navigation key to select RECORD  
MACHINE and then press OK key to select.  
OGM and then press OK key to select.  
3. Press the Navigation key to select DELETE  
4. Press the Navigation key to select ANSWER  
ONLY or ANSW.&RECORD and then press  
OK key to confirm.  
ALL and then press OK key to select.  
5. Press the Navigation key to select RECORD  
OGM.  
6. Press OK key to start recording your new  
outgoing message.  
7. Press OK key again to end the recording.  
The maximum length of an outgoing message is 2  
minutes.  
To hear your outgoing message, select PLAY at  
step 5.  
To delete a personalized outgoing message and  
return to the predefined one, select DELETE at  
step 5.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 uSING ThE INTERCOM  
If there are more than 2 registered handsets, the  
Using the intercom  
handset numbers which are available for intercom,  
and a '*', will be displayed. Press the specific handset  
number you wish to call, or press '*' to ring all  
handsets, to start intercom.  
Intercom, call transfer and conference are only  
possible with at least 2 handset registered to the  
same base station. It allows you to make free internal  
calls, transfer external calls from one handset to  
another, and set up a 3-way conference with two  
handsets and an external call.  
Press TALK key on the called handset to answer  
the internal call, where both internal callers can talk.  
Intercom is established.  
Press END key on the first handset to transfer the  
external call to the called handset. The external call  
is transferred.  
If you try to make a call while another handset is  
already on an external call, you'll hear a busy tone for  
a few seconds before the display returns to standby.  
If there is no answer from the called handset, press  
INT key to resume the external call.  
Intercom another handset  
Press INT key in standby mode.  
Answer an external call during  
intercom  
Intercom is established immediately if there are only  
2 registered handsets.  
During intercom, a new call tone is emitted when  
If there are more than 2 registered handsets, the  
handset numbers which are available for intercom,  
and a * , will be displayed. Press the specific  
handset number you wish to call, or press * to ring all  
handsets, to start intercom.  
there is an incoming external call.  
Press TALK key to answer the external call and end  
the intercom.  
Connection with the external call is established.  
To put the internal call on hold and answer the  
incoming external call, press INT key.  
Transfer an external call to another  
handset  
During the call, press INT key to put the external call  
on hold (The caller can no longer hear you).  
Intercom is established immediately if there are only  
2 registered handsets.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
uSING ThE INTERCOM  
Switch between an internal and  
external call  
During the call, press INT key to switch between an  
internal or external call.  
Establish a three-party conference call  
The conference call feature allows one external call  
to be shared with two handsets (in intercom). The  
three parties can share the conversation and no  
additional network subscription is required.  
During an external call, press INT key to put the  
external call on hold (the caller can no longer hear you).  
If there are more than 2 registered handsets, the  
handset numbers which are available for intercom  
will be displayed. Press the specific handset number  
you wish to call to start intercom. Press TALK key on  
the called handset to answer the internal call, where  
both internal callers can talk. Intercom is established.  
Press and hold INT key for 2 seconds on the first  
handset to start the three-party conference.  
CONFERENCE will be displayed on the screen once  
the conference call is established.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 AdvANCEd uSE OF YOuR TELEPhONE  
Register your handset  
Advanced use of your  
telephone  
IMPORTANT: When you purchase a telephone, all  
handsets are already registered to the base, so you  
do not need to register them. Handset registration is  
only necessary when you buy extra handsets or if a  
handset has become faulty.  
Change Master PIN  
The Master PIN is used for registration/un-registration  
of handsets and for accessing the answering  
machine remotely. The default Master PIN number  
is 0000. The maximum length of the Master PIN is 8  
digits.  
They may be different if you want to register another  
handset model, in which case you should refer to its  
user guide.  
Additional handsets must be registered to the base  
unit before you can use them. Up to 4 handsets can  
be registered to one base station.  
Note: If you forget your PIN code, you can reset it to  
its default 0000 using a handset Reset.  
The Master PIN is required before you can register or  
un-register handsets.  
1. Press MENU key to enter menu selection.  
By default, the Master PIN is 0000.  
2. Press the Navigation key to select  
ADVANCED SET and then press OK key to  
select.  
On the base station, press and hold the HANDSET  
LOCATOR key for approximately 5 seconds.  
3. Press the Navigation key to select CHANGE  
1. On the handset, press MENU key to enter  
PIN and then press OK key to select.  
menu selection.  
4. Enter the current Master PIN when prompted  
and then press OK key to confirm. As you  
enter the PIN it will be shown as asterisks (*)  
on the screen.  
2. Press the Navigation key to select ADVANCED  
SET and then press OK key to select.  
3. Press the Navigation key to select  
REGISTRATION and then press OK key to  
select.  
5. Enter the new PIN and then press OK key to  
confirm. A confirmation beep is played.  
If no action is taken on the handset within 10 seconds,  
the registration procedure will be aborted. If this  
happens, repeat the first step. (Enter the Master PIN  
when prompted and then press OK key to confirm.  
(The default master PIN is 0000)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
AdvANCEd uSE OF YOuR TELEPhONE  
WAITING is displayed on the screen. A confirmation  
beep is played to indicate successful registration,  
Set prefix  
This allows you to define a prefix number to be added  
to the beginning of any pre-dialed number, and to  
define a detect string to prevent the prefix number  
being added unless the detect string matches the  
first digits of the pre-dialed number, in which case the  
prefix number will replace the detect string digits.  
and the handset will return to standby mode, with its  
handset number displayed.  
If no base is found within a certain period, NO  
BASE will be displayed with an error tone to  
indicate failed registration and the handset returns  
to standby mode, and you will need to repeat the  
registration sequence.  
You can enter up to 5 digits for the detect string and  
up to 10 digits for the auto prefix number.  
1. Press MENU key to enter menu selection.  
Un-register your handset  
2. Press the Navigation key to select ADVANCED  
1. Press MENU key to enter menu selection.  
SET and then press OK key to select.  
2. Press the Navigation key to select ADVANCED  
3. Press the Navigation key to select AUTO  
SET and then press OK key to select.  
PREFIX and then press OK key to select.  
3. Press the Navigation key to select  
UNREGISTER and then press OK key to  
select.  
4. To enter a DETECT DIGIT string, press press  
OK key again.  
4. Enter the Master PIN when prompted and  
then press OK key to confirm. (The default  
master PIN is 0000)  
5. Press the Navigation key to select the  
handset number to un-register and then press  
OK key to confirm.  
The last stored detect string is displayed (if any).  
Enter a detect string number (maximum 5  
digits) and then press OK key to confirm.  
To enter a PREFIX number, press Navigation  
to display PREFIX and then press OK key. The  
last stored prefix number is displayed (if any).  
A confirmation beep is played to indicate successful  
un-registration.  
If no action is taken on the handset within 15 seconds,  
the un-registration procedure will be aborted and the  
handset returns to standby mode.  
5. Enter the prefix number (maximum 10  
digits) and then press OK key to confirm. A  
confirmation beep is played.  
If no detect string (blank) is entered, the prefix  
number will be automatically added to the pre-dial  
number after TALK key is pressed.  
You must use a handset to un-register handsets from  
the base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 AdvANCEd uSE OF YOuR TELEPhONE  
For numbers starting with *, # or P, the prefix number  
will not be added to the  
2. Press the Navigation key to select ADVANCED  
SET and then press OK key to select.  
Pre-dial number after TALK key is pressed.  
3. Press the Navigation key to select FIRST  
RING and then press OK key to select.  
Change recall time  
4. Press the Navigation key to select ON or  
OFF and then press OK key to confirm. A  
confirmation beep is played.  
You may need the R button to send a Recall signal  
if you are connected to a PBX. You should normally  
leave the Recall Time at its default setting of Short  
(100ms), as this is the standard recall required in  
the telephone network, but it can be changed to  
Medium (270ms) or Long (600ms) if your telephone is  
connected to a PBX that requires a different recall time.  
Reset unit  
You can reset your phone to its default settings with  
this feature.  
Note:  
1. Press MENU key to enter menu selection.  
Upon reset, all your personal settings, call log and  
redial list entries will be deleted and the phone  
will return to its default settings. However, your  
phonebook will remain unchanged after reset.  
Also, if you have an answering machine model,  
any recorded messages will remain unchanged,  
but all other settings will be defaulted.  
2. Press the Navigation key to select  
ADVANCED SET and then press OK key to  
select.  
3. Press the Navigation key to select RECALL  
TIME and then press OK key to select.  
4. Press the Navigation key to select SHORT,  
MEDIUM or LONG and then press OK key to  
confirm. A confirmation beep is played.  
1. Press MENU key to enter menu selection.  
2. Press the Navigation key to select  
ADVANCED SET and then press OK key to  
select.  
Set first ring  
When this function is set to Off, the first ring from  
an incoming call will not sound. This is useful on  
exchanges where calling line identity is sent after the  
first ring.  
3. Press the Navigation key to select RESET  
and then press OK key to select.  
4. P r e s s OK k e y a g a i n t o c o n f i r m .  
A
1. Press MENU key to enter menu selection.  
confirmation beep is played and the unit is  
reset to its default settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANSWERING MAChINE SETTINGS  
(ECO710 ONLY)  
29  
3. Press the Navigation key to select  
Answering machine settings  
(eco710 ONLY)  
SETTINGS and then press OK key to select.  
4. Press the Navigation key to select REMOTE  
ACC. and then press OK key to select.  
5. Press the Navigation key to select ACTIVATE  
or DEACTIVATE and then press OK key to  
confirm.  
Set ring delay  
1. Press the MENU key to enter menu selection.  
2. Press the Navigation key to select ANSW  
6. A confirmation beep is played. Press END  
MACHINE and then press OK key to select.  
key to go back to standby mode.  
3. Press the Navigation key to select  
Once the remote control access is activated,  
you can check the messages of your answering  
machine when you are away from home, by calling  
from another phone.  
SETTINGS and then press OK key to select.  
4. Press OK key to enter the RING DELAY  
option list.  
5. Press the Navigation key to select 2 – 7  
RINGS or ECONOMY and then press OK key  
to confirm your choice.  
If the answering machine is turned off, you must  
change your master PIN from its default 0000,  
before you can use the remote access feature.  
6. A confirmation beep is played. Press HANG-  
UP/EXIT key to go back to idle mode.  
To check messages remotely  
If you select Economy mode, the answering  
machine will answer calls and start playing the  
greeting message after 5 rings if you have no new  
messages, or after 3 rings if there is at least one  
new message recorded.  
1. When you are away from home, dial your  
home phone number from another phone.  
The answering machine answers and starts  
playing your greeting message.  
2. While the OGM is playing, press # key on the  
phone you used to dial and enter the remote  
access code (which is the same as your  
master PIN code).  
To activate/deactivate remote control  
access  
1. Press the MENU key to enter menu selection.  
The answer machine will drop the line immediately  
if there is no detection of the master PIN entry  
within 8 seconds from pressing the #.  
2. Press the Navigation key to select ANSW  
MACHINE and then press OK key to select.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANSWERING MAChINE SETTINGS  
(ECO710 ONLY)  
30  
If the remote access code is correct, a confirmation  
beep can be heard, and then you need to press  
the 2 key, within 8 seconds, to start playing any  
messages.  
3. Press the Navigation key to select  
SETTINGS and then press OK key to select.  
4. Press the Navigation key to select  
LANGUAGE and then press OK key to select.  
5. Press the Navigation key to select your  
preferred language and then press OK key to  
confirm.  
The remote feature lets you perform  
the following functions:  
To Press this button  
6. A confirmation beep is played. Press END  
key to go back to standby mode.  
Review message  
1
2
8
6
3
7
9
Play back messages  
Call screening  
Call screening allows you to hear the caller while he  
is leaving a message.  
Stop message playback  
Erase message (during message playback)  
Skip message  
You can then decide if you want to talk to the caller  
directly.  
Turn on answerer machine  
Turn off answerer machine  
To adjust the speaker’s volume during call screening,  
press + and - keys on the base station. The lowest  
volume level turns call screening off.  
If the answering machine is off, and the master  
PIN has been changed from its default 0000, it will  
answer the call after 10 rings. Dial the master PIN  
code within 8 seconds and you will hear a beep to  
confirm you have entered to remote access mode,  
as above.  
Default settings  
These are the answering machine settings after the  
unit has been reset.  
Answering Machine - ON  
Set the OGM voice language  
(optional)  
Answer mode – ANSW.&RECORD mode  
Number of rings before answer – 5 Outgoing messages  
– Predefined OGM. (Personalized OGMs deleted)  
Remote access – Deactivate  
Base speaker – Level 5  
1. Press the MENU key to enter menu selection.  
2. Press the Navigation key to select ANSW  
MACHINE and then press OK key to select.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
TROuBLEShOOTING  
If it is low, replace the handset on the base unit or  
charger pod to recharge the batteries.  
Troubleshooting  
Switch off power at the mains socket, wait for a  
short time and then switch back on. This may solve  
the problem.  
ALWAYS check first that:  
You have followed all the steps listed in the user  
manual to install and set up your telephone.  
"I cannot make a call"  
All connectors are firmly inserted in their sockets.  
If the handset display shows KEYS LOCKED,  
press and hold the * button to unlock it before you  
make a call.  
Mains power to the base unit is switched on at the  
socket.  
Only one handset (or the base unit) can be  
connected to the outside line at a time.  
The handset’s batteries are correctly and securely  
installed and are not run down.  
If another handset is already using the line, you  
need to wait until it has finished its call.  
Everyday use  
"I cannot make or answer calls"  
"When I press on the keys, nothing happens"  
Make sure the batteries are fitted in your handset.  
If the Battery Level symbol on the display shows  
‘low’, put your handset back on the cradle to  
charge.  
If the handset’s display is blank, it may have been  
switched off. Press and hold the END key to switch  
it back on.  
Check that the base unit’s mains power adapter is  
plugged in and power is switched on.  
"When I key in a number, it appears on the display,  
but I cannot make an outside call"  
The base unit needs mains power for normal  
operation of the phone – not just for charging the  
batteries.  
Try a different position for the base unit –  
somewhere higher if possible, or further from other  
electrical equipment.  
Make sure you are using the telephone line cable  
supplied with your phone. Other telephone line  
cables might not work. Move the handset closer to  
the base unit.  
"The phone does not ring"  
Check that the base unit’s mains power adapter is  
plugged in and power is switched on.  
Check the battery level symbol on the display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 TROuBLEShOOTING  
The base unit needs mains power for normal  
operation of the phone – not just for charging the  
batteries.  
You should find contact details on your phone bill.  
The caller may have withheld their number or  
they may be calling from a network that does  
not transmit the caller’s number (e.g. if they are  
making international calls.)  
Make sure you are using the telephone line cable  
that was supplied with your  
"My call was cut off when I went out of range. Now I  
can’t use my handset."  
"When I try to make a call, I hear busy tone"  
If you’re using a multi-handset system, check  
Move the handset closer to the base unit before  
you try again to make a call.  
whether another handset is already on a call.  
"The volume in the earpiece is low when I’m on a  
"There is interference and noise on the line"  
call"  
Move the handset closer to the base unit, or to a  
different position.  
Make sure you’re holding the earpiece correctly  
over your ear.  
Try moving the base unit so that it’s not near other  
electrical equipment, such as a television or a  
computer.  
Adjust the volume using the UP/DOWN key.  
Intercom and transfer  
"I can’t transfer a call" Make sure the other handset is  
in range of the base unit.  
You’ll get the best sound if you place the base unit  
as high as possible. For example, in a two-floor  
building, the first-floor landing is an ideal place.  
Make sure you are dialling the correct number for  
the other handset.  
"I hear ‘beeps’ from my handset while I’m on a call"  
You may be going out of range of the base unit.  
Move closer or your call may be cut off.  
Check the Battery Level symbol on the display.  
If it’s low, recharge the batteries.  
Batteries  
"The handset’s battery cells are running low within an  
hour or two"  
Before you first use the handset, you should have  
left it on the base unit or charger pod for 14 hours  
to charge the batteries fully.  
"The Caller Display feature isn’t working"  
You need to subscribe to the Caller Display feature  
from your network service provider.  
You may need to replace the batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
TROuBLEShOOTING
Check the connection between the base unit and  
the mains power socket.  
"I try to recharge the batteries but I still get a warning  
that they are low"  
You need to replace the batteries.  
Dispose of used batteries safely – never burn  
them, or put them where they could get punctured.  
Do not use non-rechargeable batteries in your  
handset – they may explode, causing damage.  
If the fault persists...  
Disconnect all other instruments connected to the  
same line and try to make a call.  
Disconnect the base unit from the telephone  
line and plug a different phone into the master  
telephone socket. Try making a call. If this works,  
the line is OK.  
If the call does not work, and you are using a  
two-way socket adapter, remove it and plug a  
telephone directly into the socket.  
If the call now works, the adapter may be faulty.  
If you cannot make a call, the fault may be on the  
exchange line. Contact the service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 WARRANTY  
Products distributed by Oricom are manufactured  
using new materials or new and used materials  
equivalent to new in performance and reliability. Spare  
parts may be new or equivalent to new. Spare parts  
are warranted to be free from defects in material or  
workmanship for thirty (30) days or for the remainder  
of the Warranty Period of the Oricom branded product  
in which they are installed, whichever is longer. During  
the Warranty Period, Oricom will where possible repair  
and if not replace the faulty product or part thereof.  
Warranty information (Australia)  
Oricom makes no other warranties or conditions,  
express or implied, including as to acceptable quality  
and fitness for a particular purpose, except as stated  
in this Warranty. Any implied warranties that may  
be imposed by law are limited in duration to the  
Warranty Period. Oricom warrants that the product is  
free from defects in materials or workmanship during  
the Warranty Period. This Warranty does not extend  
to any product from which the serial number has  
been removed or was purchased outside of Australia.  
All component parts removed under this Warranty  
become the property of Oricom. In the unlikely  
event that your Oricom product has a recurring  
failure, Oricom may, subject to the Competition and  
Consumer Act 2010, at its discretion, elect to provide  
you with a replacement product of its choosing that  
is at least equivalent to your product in performance.  
Oricom does not warrant that the operation of the  
product will be uninterrupted or error free.  
This warranty in no way affects your statutory  
warranty rights under the Competition and Consumer  
Act 2010 or any other similar legislation.  
The Warranty Period will be 1 year from the date of  
purchase of the product evidenced by your dated  
sales receipt. You are required to provide proof  
of purchase as a condition of receiving warranty  
services. You are entitled to a replacement product  
or repair of the product according to the terms and  
conditions of this document if your product is found to  
be faulty within the Warranty Period. This Warranty  
extends to the original purchaser only and is not  
transferable. Batteries or Battery Packs (if supplied)  
with this product are covered under this warranty for  
a period of 90 days.  
Oricom is not responsible for damage that occurs as  
a result of your failure to follow the instructions that  
came with the product. These terms and conditions  
together with any specific terms and conditions  
contained in the user guide to the product purchased  
constitute the complete and exclusive agreement  
between you and Oricom regarding the product. No  
change to the conditions of this  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
WARRANTY  
Warranty is valid unless it is made in writing and  
signed by an authorised representative of Oricom.  
Oricom will not be in breach of a warranty expressly  
set out in this User Guide or under the Competition  
and Consumer Act 2010 and excludes any liability  
for damages or any other remedy arising under any  
other legislation or the common law if the damage  
occurs as a result of:  
a contract claim or any other claim. However, this  
limitation of liability will not apply to claims for  
personal injury. Nothing in this Warranty excludes,  
restricts or modifies any condition, warranty, right  
or remedy which pursuant to the Competition and  
Consumer Act 2010 applies to this Warranty and  
which may not be so excluded, restricted or modified.  
For warranties that cannot be excluded, restricted  
or modified, Oricom limits the remedies available to  
those specified in the relevant legislation.  
1. failure by you to adhere to the warnings and follow  
the instructions set out in this user guide for the  
proper installation and use of the product;  
2. negligence on your part or misuse by you of the  
product;  
3. an uncontrollable external cause which results in  
the product not functioning including but not limited to  
power failure, lightning or over voltage; and  
4. modification to the product or services carried out  
on the production by anyone other than Oricom or  
Oricom’s authorised service provider.  
Oricom will not be liable for any damages caused by  
the product or the failure of the product to perform,  
including any lost profits or savings or special,  
incidental or consequential damages. Oricom is not  
liable for any claim made by a third party or made  
by you on behalf of a third party. This limitation of  
liability applies whether damages are sought, or a  
claim made, under this Warranty or as a tort claim  
(including negligence and strict product liability),  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 CuSTOMER SuPPORT  
Customer Support  
Customer Support  
If you have any problems setting up or using this  
product you will find use-full tips and information in  
the Troubleshooting section of this user guide as  
well as "Frequently Asked Questions" on our website  
about using the product after reviewing the resources  
above or would like to purchase replacement parts or  
accessories please call our Customer Support Team.  
Our dedicated local support team are more likely to  
be able to help you than the retailer where you made  
your purchase.  
Please retain your purchase receipt and attach to  
the back page of this user guide as you will need  
to produce this if warranty service is required. Take  
a few moments to register your product online:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Australia  
Oricom International Pty Ltd  
Locked Bag 658  
South Windsor, NSW 2756  
Australia  
Phone: 1300 889 785  
(Monday to Friday 8am to 6pm AEST)  
Fax: (02) 4574 8898  
Ref:17082011  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Murphy Switch WIR 97020B User Manual
Musical Fidelity Stereo Amplifier A32 User Manual
Nady Systems Stereo Amplifier TMP 1 MICPREAMP User Manual
New Holland Lawn Mower T7170 User Manual
Nortel Networks Switch 8691SF User Manual
Olympus Camera Lens V207010BU000 User Manual
Onkyo Stereo Receiver AV Reciever User Manual
Optimus CRT Television 16 132 User Manual
Oregon Scientific Thermometer RAR681 User Manual
Palsonic Flat Panel Television PDP4250 User Manual