Palsonic CRT Television 5125PF User Manual

OWNER'S MANUAL

51CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 5125PF

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4164

Standards Australia

APP No: N15959

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Features ........................................................................................................................

Important Safety Cautions ..........................................................................................

Identification of Controls ............................................................................................

Front view .................................................................................................................

Back view ..................................................................................................................

Remote control .........................................................................................................

Battery installation ...............................................................................................

Effective range of the remote ...............................................................................

Installation ....................................................................................................................

Antenna installation ..................................................................................................

Connect to video and audio equipment ....................................................................

Operations ....................................................................................................................

Menu introduction .....................................................................................................

Power on ..................................................................................................................

Power off ..................................................................................................................

Selecting input signal ................................................................................................

Tuning In ...................................................................................................................

Auto search ..........................................................................................................

Manual search .....................................................................................................

Channel skipping .................................................................................................

Fine tuning ...........................................................................................................

Channel exchange ...............................................................................................

Setting Colour system ..........................................................................................

Setting Sound system ..........................................................................................

Selecting channel .....................................................................................................

Use Digit buttons ..................................................................................................

Use CH+/- buttons ...............................................................................................

Use previous channel

button ..........................................................................

Picture controls .........................................................................................................

Sound controls ..........................................................................................................

Use VOL+/- ..........................................................................................................

Use button .......................................................................................................

Clock setting .............................................................................................................

Sleep timer ..........................................................................................................

Clock setting ........................................................................................................

On Timer setting ..................................................................................................

On channel setting ...............................................................................................

Off Timer setting ..................................................................................................

System setting ..........................................................................................................

Blue background ..................................................................................................

OSD Language ....................................................................................................

Calendar ..............................................................................................................

Playing game .......................................................................................................

Menu demonstration ............................................................................................

Troubleshooting Guide ...............................................................................................

Specifications ..............................................................................................................

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

Intellectualized I²C-bus control

Digital AFT Technology

Four Picture Modes

Two groups of Video/Audio input terminals

One group of DVD input terminals

On-screen menu display

Full function remote control

Hyperband

Channel exchange

On timer/Off timer

Game

Calendar

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Cautions

Safety Cautions

When any unusual situation occurs, turn off the

power supply at once and remove the plug from the

wall outlet. Contact a qualified service department in

your local area.

Do not expose the TV set to rain or excessive

moisture. Avoid using the set in very warm or

damp places and never use it in a bathroom.

When cleaning dust off the picture tube disconnect

the power first. You can wipe lightly with a piece of

dry, clean and soft cloth.

Avoid exposing the set to direct sunlight and other

sources of heat to prevent damage to the cabinet

and components.

High voltage exists in this TV set. Do not remove the

cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

This TV set can operate on a power of ~240V, 50Hz. You must not use a power

supply of any other type.

Do not cover the ventilating hole in the cabinet

Keep a space of more than 10cm from the walls to the

TV set to ensure adequate ventilation.

If the power cord or the plug is damaged contact a

qualified service department for service.

When the TV set is to be left unattended for a long

period of time, turn off the power supply and remove

the plug from the wall outlet.

Don't try to push anything into the cabinet or place

any vessel with water on the TV set.

Don't overload wall outlets; extension cords, or

integral convenience receptacles as this can result

in a risk of fire or electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of Controls

Front view/Back view

Front view

VOL+

VOL-

CH+

CH-

AV/TV

1. Remote sensor.

2. Indicator.

3. Power Switch.

4. VOL+ button: volume up adjust; menu item adjust.

5. VOL- button: volume down adjust; menu item adjust.

6. CH+ button: channel up select; menu item select.

7. CH- button: channel down select; menu item select.

8. MENU button: to enter into menu operation.

9. AV/TV button: video input select.

Download from Www.Somanuals.com. All Manuals Search And Download.

Back view

(2)

AUDIO

L/MONO

VIDEO

(1)

DVD

VIDEO

L/MONO

AUDIO

L/MONO

AUDIO

C_B

C_R

S-VIDEO

1. Antenna input

2. DVD input (Y, C

, C , AUDIO: L/MONO, R)

3. AV1 input (VIDEO, AUDIO: L/MONO, R)

4. S-VIDEO input

5. Earphone jack

AV2 input (VIDEO. AUDIO,: L/MONO, R)

Notes:

The S-VIDEO terminal is prior to the VIDEO terminal, if you want to watch

a video program from the VIDEO input terminal, please disconnect the

S-VIDEO first.

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of Controls

(continued)

Remote Control

Power on/standby

Sound Mute

Direct Channel selector

TV/VIDEO Input selector

Picture mode select

On-screen display call

Previous channel

DSP

Channel up

Volume down

Volume up

To access MENU operation

Channel down

Scanning program

Sleep timer

Playing game

Calendar

SCAN

SLP

CAL

GAME

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery Installation

Effective range of the Remote Control

Open the battery

cover.

Install two "AA"

batteries matching

the +/- polarities

of the battery to

the +/- marks.

Replace the battery

cover.

Notes:

1. There should be no obstacle between the TV

and the transmitter.

2. Use the remote control within the effective range

as the above figure.

Notes:

3. If the remote control does not work, please check

whether the batteries are exhausted or the

polarity is wrong.

4. When direct sunlight, and incandescent lamp,

fluorescent lamp or any other strong light shines

on the remote sensor of the TV, the remote

operation may be unstable.

1. When the remote control will not be used for a

long period of time or when the batteries are

worn out, remove the batteries.

2. Do not drop or dampen the remote control.

3. Do not disassemble the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Antenna installation/Connect to video and audio equipment

Antenna installation

Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna

must be used. The exact type and position of the antenna will depend upon your particular area.

Notes:

Turn off the power first, when you connect an outdoor antenna to the antenna input

terminal. When installing an outside antenna system, extreme care should be taken

to keep from touching power lines or circuits as contact with them might be fatal. In

thunder and lighting weather, please disconnect the outdoor antenna to avoid

thunder/lightning strike.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect video and audio equipment

This TV set provides 2 groups of AV input terminals and 1 group of DVD terminal for your

convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture.

Please refer to the owner's manual of the equipment to be connected as well.

Connect to the side AV input terminals

VIDEO EQUIPMENT

AUDIO

L/MONO

To audio outputs

To video output

VIDEO

Signal

To earphone jack

Connect the rear AV and DVD input terminals.

DVD

To audio

outputs

Video equipment

without S-video

terminal

To video

output

To audio (R) output

To audio (L) output

To Y output

To C_Boutput

To C_Routput

Yellow (video)

white (audio L)

red (audio R, C_R)

Green (Y)

DVD

(1)

B Blue (C_B)

VIDEO

L/MONO

S-VIDEO

C_B

C_R

AUDIO

Video equipment

with S-video

terminal

To S-VIDEO

output

To audio outputs

Download from Www.Somanuals.com. All Manuals Search And Download.

In menu operation, press CH+/- to select item, press

VOL+/- to adjust selected item. Press MENU button

again or wait for several seconds to exit menu.

Operations

Menu Introduction

Press MENU button

To adjust the picture's contrast.

To adjust the picture's brightness.

To adjust the picture's colour.

To adjust the picture's sharpness.

CONTRAST

BRIGHT

COLOR

SHARPNESS

TINT

To adjust the picture's skin colour.

(This item is available only in NTSC)

Press VOL+ button

To set blue background.

To set OSD language.

BLUEBACK

ENG

To access calendar.

LANGUAGE

CALENDAR

GAME

To play game.

DEMO

To demonstrate some functions of the TV.

Press VOL+ button

To set the colour system.

To set the sound system.

To search program automatically.

To fine tune manually.

COLORSYS

SOUNDSYS

AUTO

To search program manually, it stops if a certain program is found.

To select the band for current channel.

Current program number.

FINE

MANUAL

BAND

CHANNEL

EXCHANGE

TARGET

SKIP

UHF

To exchange programs in current channel and target channel.

To set target channel.

AFT

To set channel skip.

To Fine tune automatically.

Press VOL+ button

To set sleep timer.

To set current time.

To set ON timer.

SLEEP

CLOCK

ON TIME

OFF TIME

CHANNEL

30 MIN

--:--AM

To set OFF timer.

To set ON timer program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Power On/Power Off

Turning On

Press the POWER SWITCH on the TV set.

If no picture appears and the red indicator lights up, the TV

set is in STANDBY mode. Press

button on the remote

control, then the TV set is turned on.

When the TV set is in STANDBY mode, you can also press

the CH+/- buttons on the TV set to turn on the TV.

P.M

DSP

Note:

If there is no input signal to the TV when the TV is on, blue

background will appear on the screen. (when the BLUEBACK

is set to ON). After 15 minutes if there are still no TV signals

to the TV, it will access standby mode automatically.

Turning Off

SCAN

SLP

CAL

GAME

1 Press the POWER SWITCH on the TV set if you want to cut

off the power completely.

2 If you want to turn off the TV set temporarily, press the

button on the remote control and the TV is in STANDBY mode.

Notes:

There are three kinds of Auto Power-off function:

1. When there is no input signal for 15 minutes.

2. Sleep-timer function.

3. Off-timer function

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Selecting Input Signal

1 _{Press AV button repeatedly. The screen displays input}

signal source AV1/AV2/YUV/TV. Select the input signal

source you need.

Digit

P.M

In AV mode, you can press the digit buttons to switch

DSP

back to TV mode.

DSP

Press DSP button. The screen displays current state.

Press again to cancel.

SCAN

SLP

CAL

GAME

Download from Www.Somanuals.com. All Manuals Search And Download.

Press MENU button.

Operations

Press VOL+/- buttons to select PRESET menu.

Tuning In

3 _{Press CH- button to access PRESET menu.}

Auto search/Manual search

Auto search

Access PRESET menu.

Press CH+/- buttons to select AUTO.

Press VOL+/- buttons and the TV set starts

Auto channel preset. All active channels will be

preset and stored into the memory automatically

After presetting, the TV will display the first

channel.

COLORSYS AUTO

SOUNDSYS BG

AUTO

FINE

MANUAL

During the process of Auto channel preset, pressing the MENU button

or the VOL+/- buttons will stop the process.

Digit

P.M

DSP

Note: Before you start Auto Search, we recommend you to set

a proper Sound System according to your local area.

CH+

If desired channel can not be preset by Auto search or if you would like

to preset channels to specific position numbers one by one, use manual

search function.

VOL-

VOL+

Manual search

CH-

BAND

VHF

Firstly please select a channel number with

digit buttons or CH+/- buttons .You can also

access PRESET menu, select CHANNEL item

and adjust with VOL+/- button manually to select

the desired channel number (from 0~255).

CHANNEL

EXCHANGE

TARGET

SKIP

SCAN

SLP

CAL

GAME

In PRESET menu, select MANUAL item.

Press VOL+ button, the set searches towards

higher frequency. Press VOL- button, the set

searches towards lower frequency. The search

stops when a program is found and this

program will be stored in the specified position

number.

COLORSYS AUTO

SOUNDSYS BG

AUTO

FINE

MANUAL

You can use band selection to quicken

search process. Select BAND item and press

VOL+/- buttons. The band switches among

VLF, VHF and UHF. Then select MANUAL

item and press VOL+/- buttons to start manual

search.

BAND

UHF

CHANNEL

EXCHANGE

TARGET

SKIP

Repeat the above steps if you want to store another program in other

position number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Tuning In

(continued)

Channel skipping/Fine tuning

After presetting the channels, you can skip unnecessary position

numbers so that only the channels you want are selected.

Channel skipping

BAND

UHF

Please select a channel number with

CHANNEL

EXCHANGE

TARGET

SKIP

Digit buttons or CH+/- buttons. You can also

access PRESET menu, select CHANNEL

item and select a channel number with

VOL+/- buttons.

Digit

P.M

DSP

In PRESET menu, please select SKIP item

and press VOL+/- buttons to select ON.

BAND

UHF

CHANNEL

EXCHANGE

TARGET

SKIP

CH+

OFF

Now the selected channel will be skipped

when you browse channels by CH+/-

buttons.

VOL-

VOL+

CH-

To restore a skipped channel, please exit menu first and use Digit

buttons to select the skipped channel number. Then access the

PRESET menu, select SKIP item and set it to OFF.

SCAN

SLP

CAL

GAME

When picture and sound's effect of a channel is poor (for example:

one or two CATV channel's picture and sound are not standard), you can

correct them by making use of Fine tuning.

Fine tuning

Please select a desired channel number

with Digit buttons or CH+/- buttons. You can

also access PRESET menu, select CHANNEL

COLORSYS AUTO

SOUNDSYS BG

AUTO

item and select the channel by VOL+/- buttons.

FINE

In PRESET menu, select FINE item ,then

press and hold VOL+/- buttons until the best

picture and sound are obtained.

MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel exchange/Setting colour system/Setting sound system

After channel presetting, you can edit the order of the

programs by using the channel exchange function.

Channel exchange

Access PRESET menu and select TARGET

item.

CHANNEL

EXCHANGE

TARGET

SKIP

Press VOL+/- buttons to select a target

channel number that you would like to

exchange with the current channel. Then

select EXCHANGE item and press VOL+/-

buttons to confirm.

Digit

AFT

P.M

DSP

Now the programs in the current channel, and

target channel will exchange.

CH+

CHANNEL

EXCHANGE

TARGET

SKIP

VOL-

VOL+

You can select the current channel in the

AFT

PRESET menu by adjusting CHANNEL item.

CH-

SCAN

SLP

CAL

GAME

If the picture's colour is abnormal, you can adjust colour

system as follows.

Setting colour system

Access PRESET menu and select COLORSYS

item. Press VOL+/- button to select a proper

colour system.

COLORSYS AUTO

SOUNDSYS BG

AUTO

FINE

MANUAL

Setting sound system

In PRESET menu, select SOUNDSYS item.

Press VOL+/- buttons to select a proper

sound system.

COLORSYS AUTO

SOUNDSYS BG

AUTO

FINE

MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Selection Channel

Use 0-9 buttons and --/--- buttons/Use CH+/- Buttons/Use the PREVIOUS button

Use Digit buttons

To select one-digit channel

Press --/--- button to

display "-".

Press 0-9 direct

channel selector.

Digit

P.M

To select two-digit channel

DSP

-1

Press --/--- button

repeatedly to

Press 0-9

Press 1-9

buttons.

display "--".

CH+

CH-

To select three-digit channel

SCAN

SLP

CAL

GAME

-- 1

Press --/--- button

repeatedly to

display "---"

---

168

-16

Press 1-2

buttons.

Press 0-9

buttons.

Press 0-9

buttons.

Note: The maximum channel number is 255, the set does not act if

the channel number you input is out of the range of 0~255.

Use CH+/- buttons

Press CH+ button, the channel number increases;

Press CH- button, the channel number decreases.

Use previous channel

button

Press

button to switch between the current channel

and previous channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Picture Controls

Contrast/Brightness/Colour/Sharpness/Tint

To adjust the picture's contrast.

To adjust the picture's brightness.

Press CH+/- buttons

to select item

upwards or downwards

CONTRAST

BRIGHT

COLOR

SHARPNESS

TINT

CONTRAST

BRIGHT

COLOR

SHARPNESS

TINT

To adjust the picture's colour.

Press VOL+/-

buttons to adjust

selected item.

To adjust the picture's sharpness.

To adjust the picture's skin colour.

(This item is available only in NTSC)

1 _{Press MENU button to display PICTURE menu.}

2 _{Press CH+/- buttons to select item upwards or downwards.}

3 _{Press VOL+/- buttons to adjust selected item.}

P.M

Item

CONTRAST

BRIGHT

VOL-

weaker

darker

paler

VOL+

stronger

lighter

deeper

sharper

greenish

DSP

COLOR

CH+

SHARPNESS

TINT

softer

purplish

VOL-

VOL+

4 _{You can press P.M button to select}

picture mode: STANDARD,

CH-

DYNAMIC

PERSONAL

SOFT

SCAN

SLP

CAL

GAME

DYNAMIC, SOFT, PERSONAL.

STANDARD

Picture mode

STANDARD DYNAMIC

Item

SOFT

CONTRAST

BRIGHT

100

COLOR

SHARPNESS

TINT

Notes:

1. The item TINT is for NTSC only.

2. The above parameters maybe different in different models.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Sound Controls

Adjusting the volume and muting the sound

1 _{Use VOL+/- buttons}

Press VOL+ button to increase the volume.

Press VOL- button to decrease the volume.

2 _Use

button.

P.M

Press

button to mute the

DSP

sound completely and the screen

displays MUTE.

MUTE

VOL-

Press

button again to

restore and the VOLUME bar

appears.

VOL+

SCAN

SLP

CAL

GAME

VOLUME

Download from Www.Somanuals.com. All Manuals Search And Download.

Press MENU button.

Operations

Press VOL+/- buttons to select CLOCK menu.

Clock Setting

3 _{Press CH- button to access CLOCK menu.}

Sleep Timer/Clock Setting/On Timer Setting

Sleep timer

Access CLOCK menu and press CH+/-

buttons to select SLEEP item.

SLEEP

30 MIN

--:--AM

11:20AM

--:--AM

CLOCK

ON TIME

OFF TIME

CHANNEL

Press VOL+/- buttons to select between

0, 30, 60, 90, 120, 150 and 180. When the

sleep time elapses, the TV set goes to

STANDBY automatically.

Digit

P.M

DSP

You can also set the sleep time by using

SLP button directly.

30MINUTES

CH+

VOL-

VOL+

Clock setting

CH-

SLP

Access CLOCK menu and select

CLOCK item.

SLEEP

30 MIN

SCAN

SLP

CAL

GAME

CLOCK

--:--AM

11:20AM

--:--AM

Press VOL+/- buttons to set AM or PM.

Press Digit buttons directly to set current

time for the TV.

ON TIME

OFF TIME

CHANNEL

Note: The ON TIME and OFF TIME can be set only after

you finish setting the CLOCK item.

On timer setting

Access CLOCK menu and select ON

TIME item.

SLEEP

30 MIN

Press VOL+/- buttons to set AM or PM.

Press Digit buttons to set ON time. In

STANDBY mode, the TV set auto turns

on when your preset ON time elapses.

CLOCK

--:--AM

11:20AM

--:--AM

ON TIME

OFF TIME

CHANNEL

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Clock Setting

(continued)

On channel Setting/Off timer Setting

On Channel Setting

Please set ON TIME before setting

CHANNEL.

SLEEP

30 MIN

--:--AM

11:20AM

--:--AM

CLOCK

ON TIME

OFF TIME

CHANNEL

Access CLOCK menu and select

CHANNEL item.

Press VOL+/- buttons or Digit buttons to

select a channel number. When the preset ON

time elapses, the set auto turns on and goes

to the preset channel.

Digit

P.M

DSP

CH+

Off timer setting

Access CLOCK menu and select OFF

TIME item.

VOL-

VOL+

SLEEP

30 MIN

--:--AM

11:20AM

--:--AM

CLOCK

CH-

Press Digit buttons to set OFF time

directly. The TV set in working mode goes

to STANDBY mode automatically when

the OFF time elapses.

ON TIME

OFF TIME

CHANNEL

SCAN

SLP

CAL

GAME

Notes:

(1) Once the functions of ON TIME or OFF TIME fulfil, you need to

set the ON TIME or OFF TIME again if you want to use this

function next time.

(2) After you finish setting OFF TIME item, if the set auto goes to

STANDBY because there is no signal input for a continuous 15

minutes, or if you turn off manually, then the preset OFF TIME

and SLEEP will be cancelled. As the same way, turn on the set

in advance will cancel the ON TIME and Channel settings.

(3) Once you turn off the set by press the Power Switch, all settings

in the clock menu page will be cancelled in next time's turning on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press MENU button.

Operations

Press VOL+/- buttons to select Setup menu.

System Setting

3 _{Press CH- button to access Setup menu.}

Blue background/OSD Language/Calendar

Blue background

Access SETUP menu. Press CH+/- buttons to

select BLUEBACK item.

BLUEBACK

LANGUAGE

CALENDAR

GAME

ENG

Press VOL+/- buttons to select ON or OFF.

If you select ON, when there is no signal or

signal is too poor, then a blue background will

appear.

DEMO

If you select OFF, when there is no signal, the

P.M

screen displays noisy picture.

DSP

OSD Language

CH+

Access SETUP menu. Press CH+/- to select

LANGUAGE item.

BLUEBACK

LANGUAGE

CALENDAR

GAME

ENG

VOL-

VOL+

Press VOL+/- buttons to select OSD language.

DEMO

CH-

SCAN

SLP

CAL

GAME

CAL.

Calendar

Access SETUP menu. Press CH+/- buttons to

select CALENDAR item.

BLUEBACK

LANGUAGE

CALENDAR

GAME

ENG

Press VOL+/- buttons to access calendar

interface.

DEMO

You can also press CAL. button directly to

access calendar interface.

Press VOL+/- buttons to select year, month

or date. Press CH+/- buttons to adjust.

1951 1ST JAN MON

SU MO TU WE TH FR SA

The calendar is from 1951 to 2050.

16 17

23 24

30 31

14 15

21 22

28 29

Press MENU button repeatedly to exit

CALENDAR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

System Setting

(continued)

Playing games/Menu demonstration

Playing game

Access SETUP menu. Press CH+/-

buttons to select GAME item and press

VOL+/- buttons to access game interface. You

can also access game interface by pressing

GAME button directly.

BLUEBACK

LANGUAGE

CALENDAR

GAME

ENG

DEMO

In game interface, press VOL+/- buttons

to select game level (0~4). The higher the level,

the faster the bars roll.

P.M

DSP

Press CH+/- buttons to select desired array. Every time you select,

you will be deducted 1 point. Press VOL+/- buttons to start the game and

the bars roll. Press 1, 2, 3 Digit buttons to stop left, middle, right bar

respectively. If there are three same articles in the selected array, you will

gain 15 points.

CH+

VOL-

VOL+

CH-

SCAN

SLP

CAL

GAME

Bar 1

Displaying level

Bar 2

Bar 3

Current points

Winning points

Tips

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu demonstration

Access SETUP menu. Press CH+/-

buttons to select DEMO item.

BLUEBACK

LANGUAGE

CALENDAR

GAME

ENG

Press VOL+/- buttons, then TV set

demonstrates menu operation.

DEMO

Press any button to stop it.

P.M

DSP

CH+

VOL-

VOL+

CH-

SCAN

SLP

CAL

GAME

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

Before calling service personnel, please check the following chart for a possible cause to the trouble

you are experiencing.

Symptoms

Check the following items

Be sure the power cord is plugged in.

Contrast, colour, tint are not correctly adjusted

Power is not turned on

Poor colour, poor tint

Possible interferences of automobiles, motorcycle,

trolley bus, neon lamps, etc.

Spots appear on the screen

Possible interference of electronic interference

from another TV set, a computer, an electronics

game machine, a broadcast station, etc.

Stripes appear on the screen

Double images or "ghosts"

Snowy picture

This may be caused by reflections from nearby

mountains or buildings.

Check the antenna direction.

It is possible that the aerial "lead-in" is damaged or

comes off.

Check the antenna direction.

The batteries may be worn out.

The batteries may be installed with their polarity

reversed.

Remote controller does

not work

Even if the picture or the sound is normal, changes

in room temperature sometimes makes the TV

cabinet expand or contract, making a noise. This

does not indicate a malfunction.

TV cabinet creaks

When the set is switched on, do not shift or move

the set around. Sometimes it may develop an

unevenness in colour in some parts of the screen.

This can be eliminated by switching off the set with

the POWER switch and wait for 10 minutes before

switching on again.

Unevenness in colour in

some parts of the screen

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Power Supply:

Power Consumption:

Dimensions (mm):

Weight (kg):

AC 240V, 50Hz

70W

590 (W) x 450 (H) x 473 (D)

CRT:

51cm

TV system & channel coverage

System

VHF

2-12

UHF

CATV

PAL-B/G

21-69

X~Z+2,S1~S41

Colour System:

Sound output:

Accessories:

PAL, NTSC (AV)

2.5W x 2

Remote control X 1

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

604-M21513-00

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Oven H4200 User Manual
Napoleon Fireplaces Fire Pit GLVF18N User Manual
NETGEAR Server RNDP6630 200NAS User Manual
Nikon Home Security System HMSM4050 User Manual
Nokia Cell Phone Nokia 88xx series and 8210 User Manual
NordicTrack Home Gym NTEL77060 User Manual
NordicTrack Treadmill NTL189070 User Manual
NXP Semiconductors Switch PIP3119 P User Manual
Outdoor Gourmet Gas Grill CG3023E User Manual
Patton electronic Network Card EHA2172 User Manual