Quick Start Guide
HMSM4050
Wireless
Motion Sensor
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Overview
Your package contains the following:
Wireless
Motion
Sensor
Wall
Moounting
Bracket
Hardware
Mounting
Kit
Batteries
Installing your sensor is a simple process.
1
2
3
Twist the WMS clockwise at the seam in the middle and pull the two halves apart.
Insert batteries.
Register your sensor with your Wireless System Controller using a process called Discovery. Refer to your
homesight Software User Guide for instructions on how to discover your Wireless Motion Sensor.
4
5
Reassmble the halves tightening counterclockwise until it clicks. Line up the vertical seams so the wall mounting
bracket (if used) will attach correctly.
Mount the sensor.
Feature Locator
Battery
installation
2
1
Discovery Button
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Hints
Please consider the following points when mounting the sensor:
•
The sensor must be aimed so that it does not directly face the sun or any bright light; otherwise, this may cause
damage to the sensor.
•
The Motorola Wireless Motion Sensor is constructed of UV-resistant ABS plastic.If installing the Wireless Motion
Sensor outside, it should be shielded from the elements, such as underneath a porch roof. Do not install the
sensor where it is subjected directly to the elements.
•
Typically, the sensor's range is 60–200 feet from the Wireless System Controller, depending on indoor or outdoor
use and the number of obstacles. These can include metal framing, thick walls, and other wireless devices
operating at 418 MHz. It is recommended that different positions be tried for optimal results.
Installing Your Wireless Motion Sensor
Your sensor can either be mounted on a wall or just sit on a horizontal surface.
Wall Mount Your Wireless Motion Sensor
Warning: When mounting near a window, drilling too close to the glass could break the glass and possibly cause it to
shatter. The window extends deeper into the frame than can be seen; therefore, ensure your screw is beyond the
glass before drilling.
1
Using the holes on the drilling template found later in this guide, mark the position of the holes to be
drilled.
For drywall or other composite surfaces use a 7/32" drill bit. Drill a hole for each of the mounting
screws and insert a plastic wall anchor into each hole.
For other solid surfaces, use a 1/16" drill bit. Drill a pilot hole for each of the mounting screws.
Ensure that fresh batteries have been installed.
2
3
Position the sensor to survey the desired area. Please keep in mind that the field of view is 90 degrees and
motion sensor distance works up to 20 feet .
4
Using the screws provided, secure the mounting bracket to the wall. Be sure to mount the sensor in the manner
pictured above so that the unit has free motion for optimum aiming.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mount Drilling Template
Mounting tools: Screwdriver, electric drill or awl. On hard surfaces, Motorola recommends that you pre-drill ½-inch
deep pilot holes with a drill bit slightly smaller than the bracket mounting screws before securing the bracket to the
surface. When mounting a sensor on soft surfaces like sheetrock, use an awl to punch holes in the material slightly
smaller than the plastic anchors included in the hardware mounting kit.
The illustration is drawn to a one-to-one scale, which means that it provides the exact dimensions required to mount
the unit.
Drill Holes In
1.76 in
These Positions
Table Mount Your Wireless Motion Sensor
The sensor can be placed on any horizontal surface.
1
2
3
Locate the sensor on a horizontal surface.
Ensure that fresh batteries have been installed.
Make adjustments to the sensor coverage angle by tilting and panning the unit with your hand.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
Sensor will not register with the
Wireless System Controller
•
•
•
•
•
•
Ensure that the sensor has fresh batteries.
Ensure that the Wireless System Controller is powered and online.
Ensure that you are pressing the Discovery button.
Reposition the sensor closer to the Wireless System Controller.
Try another location.
Motion events are not triggered
Ensure that the sensor is not positioned behind glass. The motion sensor is
triggered by changes in heat. Any material such as glass that "insulates”
keeps the camera from detecting heat changes (movement).
•
•
Ensure that the sensor is positioned properly, avoiding obstacles that can
interfere.
Consider adding a Motorola Wireless Signal Repeater (HMAC9100) to
increase device signal communication range.
FAQ
How far away can the sensor “see?”
The motion sensor is capable of detecting objects up to 20 feet away with a field of view of 90 degrees.
How can I most effectively use my Wireless Motion Sensor with my homesight System’s video camera?
The WMS can act as a trigger to your system’s wired or wireless video camera. By positioning it in area ahead of the motion sensor
built into the video camera, the Wireless Motion Sensor can trigger an event ahead of time to have the video recorder capture the
event in its entirety. Keep in mind that the survey field of the WMS is 90 degrees when you position it in relation to your video
camera. Try not to have the WMS aimed directly in front of where the events will typically take place, but rather,to the side or angled
so as to include as much of the area in its sweep as possible.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and Specifications
•
•
•
•
•
•
Device signal communication
LED in sensor illuminates when activity occurs
90 degree field of view for motion
Weather resistant
All hardware for either wall or ceiling mounting included
Two AA alkaline battery operation (batteries included)
View:
90° field of view
Up to 20 feet
418 MHz
Surveilance range:
Communication frequency:
Typical range open air (line of sight):
200 feet (60 m)
Typical range indoors:
Overall size:
60 feet (18 m)
6.38"L × 3.00"W × 2.01"H (162mm × 76mm × 51mm)
Operational temperature/ humidity:
32° to 104° F with 10% to 80% humidity with all components operating within
manufacturer thermal limits
Storage temperature:
-25° C to 75° C
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
CAUTION: Changes or modifications not expressly approved by Motorola for compliance could void the user’s authority to operate
the equipment.
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Declaration of Conformity
Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility
that the HMVC3075 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B digital devices.
Restrictions on Use of Wireless Devices
In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the
organization. If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or environment, you are
encouraged to ask for authorization to use the device prior to turning on the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this
product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. Correction of interference
caused by such unauthorized modification, substitution, or attachment is the responsibility of the user.
FCC Certification
This product contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules for intentional
radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo.
This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference that may cause undesired operation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Wireless Motion Sensor
Motorola, Inc., Broadband Communications Sector (" Motorola")
Limited Warranty. Motorola warrants to you, the original end user customer, that (A) the Product, excluding Software, will be materially free from
defects in materials and workmanship under normal use, and (B) with respect to Software, (i) the media on which the Software is provided will be free
from defects in material and workmanship under normal use, and (ii) the Software will perform materially as described in its documentation. This
Limited Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided, for a period of ninety (90)
days from the date of purchase from Motorola or an authorized Motorola reseller, and (B) for the Product (excluding Software), for a period of one (1)
year from the date of purchase from Motorola or from an authorized Motorola reseller. To take advantage of this Limited Warranty or to obtain
technical support, you must call the Motorola toll-free phone number (below). Motorola’s sole and exclusive obligation under this Limited Warranty for
retail sales shall be to repair or replace any Product or Software that does not meet this Limited Warranty. All warranty claims must be made within the
applicable Warranty Period.
General Information. The warranties described in this Section shall not apply: (i) to any Product subjected to accident, misuse, neglect, alteration,
Acts of God, improper handling, improper transport, improper storage, improper use or application, improper installation, improper testing or
unauthorized repair; or (ii) to cosmetic problems or defects which result from normal wear and tear under ordinary use, and do not affect the
performance or use of the Product. Motorola’s warranties apply only to a Product that is manufactured by Motorola and identified by Motorola owned
trademark, trade name or product identification logos affixed to the Product. Motorola does not warrant to you, the end user, or to anyone else that the
Software will perform error free or without bugs. MOTOROLA IS NOT RESPONSIBLE FOR, AND PROVIDES “AS IS” ANY SOFTWARE SUPPLIED
BY 3RD PARTIES. EXCEPT AS EXPRESSLY STATED IN THIS SECTION (“WARRANTY INFORMATION”), THERE ARE NO WARRANTIES OF
ANY KIND RELATING TO THE PRODUCT, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THE WARRANTY AGAINST INFRINGEMENT PROVIDED IN THE UNIFORM
COMMERCIAL CODE. Some states do not allow for the exclusion of implied warranties, so the above exclusion may not apply to you.
What additional provisions should I be aware of? Because it is impossible for Motorola to know the purposes for which you acquired this Product or
the uses to which you will put this Product, you assume full responsibility for the selection of the Product for its installation and use. While every
reasonable effort has been made to insure that you will receive a Product that you can use and enjoy, Motorola does not warrant that the functions of
the Product will meet your requirements or that the operation of the Product will be uninterrupted or error-free. MOTOROLA IS NOT RESPONSIBLE
FOR PROBLEMS OR DAMAGE CAUSED BY THE INTERACTION OF THE PRODUCT WITH ANY OTHER SOFTWARE OR HARDWARE. ALL
WARRANTIES ARE VOID IF THE PRODUCT IS OPENED, ALTERED, AND/OR DAMAGED.
THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have arising out of or in connection with this Product,
whether made or suffered by you or another person and whether based in contract or tort.
THIS PRODUCT IS INTENDED ONLY FOR USE TO FACILITATE HOME MONITORING AND CONTROL AND IS NOT INTENDED TO BE A
SUBSTITUTE FOR A HOME SECURITY SYSTEM. MOTOROLA HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER THAT MAY ARISE FROM
THE USE OR INABILITY TO USE THIS PRODUCT AS A HOME SECURITY SYSTEM. IN NO EVENT SHALL MOTOROLA BE LIABLE TO YOU OR
ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY, LOSS OF
PROPERTY, BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY LOSS), OR FROM ANY
BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL
MOTOROLA’S LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT.
THIS PRODUCT EMPLOYS WIRELESS TECHNOLOGY AND, IN SOME CASES, MAY FACILITATE TRANSMISSION OF DATA OR VIDEO OVER
THE INTERNET IN CONNECTION WITH ITS USE. THE CUSTOMER SHOULD UNDERSTAND THAT ALL WIRELESS TRANSMISSIONS MAY BE
SUBJECT TO INTERCEPTION AND THAT DATA TRANSMISSION OVER THE INTERNET CANNOT BE GUARANTEED TO BE 100% SECURE. AS
A RESULT, MOTOROLA CANNOT ENSURE OR WARRANT THE SECURITY OF ANY VIDEO OR DATA TRANSMITTED BY OR THROUGH THIS
PRODUCT, WHETHER OR NOT TRANSMITTED VIA THE INTERNET, AND THE CUSTOMER USES SUCH PRODUCT AT HIS OR HER OWN
RISK.
These matters are governed by the laws of the Commonwealth of Pennsylvania, without regard to conflict of laws principles and excluding the
provisions of the United Nations Convention on Contracts for the International Sale of Goods.
Please call the Motorola toll-free number, 1-877-466-8646, for technical support or warranty service.
Battery Life
For your Motorola homesight™ devices that require batteries, use high-quality, non-corrosive batteries designed for use in electronic equipment.
Battery life is one year with normal usage. Do not use rechargeable batteries in any Motorola homesight™ device.
Registration
Register your product at:
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Visit our website at:
Copyright © April, 2005 by Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as
translation, transformation or adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to
provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the
product(s) described in this manual at any time.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their
respective owners.
520390-001
4/2005
MGBI
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|