Omron Blood Pressure Monitor M6 AC User Manual

English  
Français  
Deutsch  
Italiano  
Español  
Nederlands  
Vꢀꢁꢁꢂꢃꢄ  
Türkçe  
Automatic Blood Pressure Monitor  
Model M6 AC  
Instruction Manual  
IM-HEM-7322-E-01-08/2013  
2298870-5A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
b
J
N
c
d
a
O
Download from Www.Somanuals.com. All Manuals Search And Download.  
A
K  
B
C
L  
D
E
F
J
I
H
G
P
Q
R
V
W
X
Y
Z
M
S
AA  
A
B
T
A
C
O
N
AD  
AE  
AF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U
Check following components!  
Vérifier les composants suivants !  
Controleer de volgende onderdelen!  
Prüfen Sie folgende Teile des Lieferumfangs! Uꢏꢐꢑꢒꢏꢓꢔꢒꢈꢕꢖꢒꢗꢘ ꢙꢚꢒ ꢛꢐꢜꢝꢐꢞꢒꢞꢔꢟ!  
Controllare i componenti indicati di seguito!  
ꢀꢁꢂꢃꢄꢅꢂꢆꢇꢈꢉꢇꢊꢋꢁꢋꢌꢊꢋꢍꢇꢈꢆꢎꢌ!ꢍꢎꢊꢈꢋꢅꢇꢌ"  
¡Compruebe los siguientes componentes!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Information  
Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or  
serious injury.  
(General Usage)  
Consult your physician before using the device in pregnancy including pre-eclampsia, or if diagnosed with  
arrhythmia or arteriosclerosis.  
Do not use the device on the injured arm or the arm under medical treatment.  
Do not apply the arm cuff on the arm while being on an intravenous drip or blood transfusion.  
Consult your physician before using the device on the arm with an arterio-venous (A-V) shunt.  
Do not use the device with other medical electrical (ME) equipment simultaneously.  
Do not use the device in the area the HF surgical equipment, MRI, or CT scanner exists, or in the oxygen rich  
environment.  
EN  
The air tube or the AC adapter cable may cause accidental strangulation in infants.  
Contained small parts that may cause a choking hazard if swallowed by infants.  
(AC Adapter (optional) Usage)  
Do not use the AC adapter if the device or the power cord is damaged. Turn off the power and unplug the power  
cord immediately.  
Plug the AC adapter into the appropriate voltage outlet. Do not use in a multi-outlet plug.  
Never plug in or unplug the power cord from the electric outlet with wet hands.  
Caution: Indicates a potentially hazardous situation which, if not avoided, may result in minor or  
moderate injury to the user or patient or damage to the equipment or other property.  
(General Usage)  
Always consult your physician. Self-diagnosis of measurement results and self-treatment are dangerous.  
People with severe blood flow problems, or blood disorders, should consult a physician before using the device,  
as the arm cuff inflation can cause bruising.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Information  
If there are any abnormalities during the measurement, remove the arm cuff.  
Do not use this device on infants or persons who cannot express their intentions.  
Do not inflate the arm cuff more than necessary.  
Do not use the device for any purpose other than measuring blood pressure.  
Use only the approved arm cuff for this device. Use of other arm cuffs may result in incorrect measurement results.  
Do not use a mobile phone or other devices that emit electromagnetic fields, near the device. This may result in  
incorrect operation of the device.  
Do not disassemble the monitor or arm cuff.  
Do not use in a location with moisture, or a location where water may splash on the device. This may damage the  
device.  
Do not use the device in a moving vehicle (car, airplane).  
Do not take measurements more than necessary. It may cause bruising due to blood flow interference.  
Consult your physician before using the device if you had a mastectomy.  
(AC Adapter (optional) Usage)  
Fully insert the power plug into the outlet.  
When disconnecting the power plug from the outlet, do not pull the power cord. Be sure to pull from the power plug  
safely.  
When handling the power cord, take care not to do the following:  
Do not damage.  
Do not tamper with it.  
Do not twist.  
Do not break it.  
Do not forcibly bend or pull.  
Do not bundle during use.  
Do not place under heavy objects.  
Do not pinch.  
Wipe the dust off from the power plug.  
Unplug monitor when not in use.  
Disconnect the power plug before cleaning.  
Use only the original AC adapter designed for this device. Use of unsupported adapters may damage and/or may  
be hazardous to the device.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Information  
(Battery Usage)  
Do not insert the batteries with their polarities incorrectly aligned.  
Use only 4 “AA” alkaline or manganese batteries with this device. Do not use other types of batteries. Do not use  
new and used batteries together.  
Remove the batteries if the device will not be used for three months or more.  
General Precautions  
• Do not forcibly crease the arm cuff or the air tube excessively.  
• Do not press the air tube while taking a measurement.  
EN  
To unplug the air plug, pull on the air plug at the connection with the monitor, not the tube itself.  
• Do not drop the monitor or subject device to strong shocks or vibrations.  
• Do not inflate the arm cuff when it is not wrapped around your arm.  
• Do not use the device outside the specified environment. It may cause an inaccurate reading.  
• Read and follow the "Important information regarding Electro Magnetic Compatibility (EMC)" in the  
"6. Specifications".  
• Read and follow the "Correct Disposal of This Product" in "6. Specifications" when disposing of the device and any  
used accessories or optional parts.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Know Your Device  
Open the rear cover page to read the following:  
The letter identifiers on the rear cover page correspond to those in the body of this page.  
Monitor  
Display  
A
P
Display  
Memory symbol  
B
C
D
E
F
G
H
I
Q
R
S
T
Cuff wrap guide lamp  
USER ID symbol  
Memory button  
Average value symbol  
Systolic blood pressure  
Diastolic blood pressure  
Weekly average button  
START/STOP button  
U
Up/Down buttons  
Heartbeat symbol  
(Flashes during measurement)  
USER ID selection switch  
V
W
X
Y
Z
AA  
AB  
AC  
AD  
AE  
AF  
Date/Time setting button  
Date/Time display  
Blood pressure colour indicator  
Morning average symbol  
Evening average symbol  
Morning hypertension symbol  
Movement error symbol  
Irregular heartbeat symbol  
Blood pressure level indicator  
Cuff wrap guide  
J
K
L
Air jack  
Battery compartment  
AC adapter jack  
Arm cuff  
M
Arm cuff (Arm circumference 22-42cm)  
N
Air plug  
Low battery symbol  
O
Air tube  
Deflation symbol  
Pulse display / Memory number  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Know Your Device  
Display Symbols  
Irregular Heartbeat Symbol (  
)
Normal Heartbeat  
When the monitor detects an irregular rhythm two or more times during the  
measurement, the irregular heartbeat symbol (  
display with the measurement values.  
Pulse  
) will appear on the  
Blood pressure  
An irregular heartbeat rhythm is defined as a rhythm that is 25% less or 25%  
more than the average rhythm detected while the monitor is measuring the  
systolic and diastolic blood pressure.  
Irregular Heartbeat EN  
Long  
Short  
Pulse  
If the irregular heartbeat symbol (  
results, we recommend you consult your physician. Follow the directions  
of your physician.  
) displays with your measurement  
Blood pressure  
Movement Error Symbol (  
)
The movement error symbol is displayed if you move your body during the measurement. Please remove the arm  
cuff, and wait 2-3 minutes. Take another measurement, remain still during measurement.  
Average Value Symbol (  
)
The average value symbol is displayed when you press and hold the memory button for more than 3 seconds. The  
most recent average value appears on the display screen.  
Cuff Wrap Guide Lamp (  
/
)
If the cuff was wrapped too loosely, it may cause unreliable results. If the wrapping of cuff is too loose, the cuff wrap  
guide Lamp lights in “orange”. Otherwise lights in “green”. This is the function which is used as an aid in  
determining if the cuff is wrapped snugly enough.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Know Your Device  
Blood Pressure Colour Indicator  
If your systolic or diastolic pressure is above the standard range (135 mmHg for the  
systolic blood pressure and/or 85 mmHg for the diastolic blood pressure), the blood  
pressure colour indicator will light in “orange” when the measurement result is displayed. If  
they are within the standard range, the blood pressure colour indicator will light in “green”.  
The JNC7* Guideline recommends the following guideline.  
General Guidelines for Blood Pressure  
Prehypertension at Office  
120-139 mmHg  
Hypertension at Home  
135 mmHg  
Systolic Blood Pressure  
Diastolic Blood Pressure  
80-89 mmHg  
85 mmHg  
These are from statistical values for blood pressure.  
* JNC7: The Seventh Report, 2003 Dec, of the Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High  
Blood Pressure.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Preparation  
2.1 Battery Installation  
1. Remove the battery cover.  
2. Insert 4 “AA” batteries as  
indicated in the battery  
compartment.  
EN  
3. Replace the battery cover.  
Notes:  
• When the low battery symbol (  
) appears on the display, turn the monitor off, then replace all batteries  
at the same time. Long life alkaline batteries are recommended.  
• The measurement values continue to be stored in memory even after the batteries are replaced.  
• The supplied batteries may have a shorter life.  
Disposal of used batteries should be carried out in accordance with the national/local regulations for the  
disposal of batteries.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Preparation  
2.2 Using the AC Adapter  
1. Insert the AC adapter plug  
into the AC adapter jack on  
the rear side of the monitor.  
2. Plug the AC adapter into an  
electrical outlet.  
To disconnect the AC adapter, unplug the AC adapter from the electrical outlet first  
and then remove the AC adapter plug from the monitor.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Preparation  
Open the rear cover page to read the following:  
The letter identifiers on the rear cover page correspond to those in the body of this page.  
2.3 Setting the Date and Time  
Set the monitor to the correct date and time before taking a measurement for the first time.  
EN  
H
1. Press the Date/Time setting ( ) button.  
V
The year flashes on the  
Date/Time display.  
2. Push or button to change the year.  
Push  
button to confirm the year and then the month flashes. Repeat the same  
steps to change the month, day, hour, and minutes.  
Year  
Month  
Day  
Hour  
Change  
: Forward  
: Back  
Confirm  
Minute  
Change  
Confirm  
Change  
Confirm  
Change  
Confirm  
Change  
Confirm  
3. Press the START/STOP button to turn the monitor off.  
Notes:  
• If the batteries have been replaced, the date and time setting will need to be reset.  
• If the date and time are not set, “-/ - -:--” appears during or after measurement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
3. Using the Device  
Open both the front and rear covers to read the following:  
The letter identifiers on the cover pages correspond to those in the body of this page.  
3.1 Applying the Arm Cuff  
Remove tight-fitting clothing or tight rolled up sleeve from your left upper arm.  
Do not place the arm cuff over thick clothes.  
N
J
1. Insert  
the air plug into  
the air jack securely.  
2. Wrap the arm cuff firmly in place around your left upper  
arm.  
a
The bottom edge of the arm cuff should be  
1 to 2 cm above the elbow.  
O
Air tube is on the inside of your arm and aligned with your middle finger.  
3. Secure closed with the fabric fastener.  
Notes:  
• When you take a measurement on the right arm, the air tube will be at the side of your elbow. Be careful  
b
not to rest your arm on the air tube. ---  
• The blood pressure can differ between the right arm and the left arm, and therefore also the measured  
blood pressure values can be different. OMRON recommends to always use the same arm for  
measurement. If the values between both arms differ substantially, please check with your physician  
which arm to use for your measurement.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
3.2 How to Sit Correctly  
To take a measurement, you need to be relaxed and comfortably seated, under  
comfortable room temperature. Avoid bathing, drinking alcohol or caffeine, smoking,  
exercising or eating 30 minutes before taking a measurement.  
• Sit on a chair with your feet flat on the floor.  
EN  
c
• Sit upright with your back straight. ---  
• Sit with your back and arm being supported.  
• The arm cuff should be placed on your arm at the same level as your heart. ---  
d
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
3.3 Taking a Measurement  
Notes:  
To cancel a measurement, press the START/STOP button to release the air in the arm cuff.  
• Remain still while taking a measurement.  
The monitor is designed to take measurements and store the measurement values in  
the memory for 2 people using USER ID 1 and USER ID 2.  
1. Select your USER ID (1 or 2).  
2. Press the START/STOP button.  
The arm cuff starts to inflate automatically.  
START  
INFLATE  
DEFLATE  
COMPLETE  
If your systolic pressure is  
more than 210 mmHg  
After the arm cuff starts to inflate, press and  
hold the START/STOP button until the  
monitor inflates 30 to 40 mmHg higher than  
your expected systolic pressure.  
Cuff Wrap Guide Lamp  
Notes:  
• The monitor will not inflate above 299 mmHg.  
• Do not apply more pressure than necessary.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
3. Remove the arm cuff.  
4. Press the START/STOP button to turn the monitor off.  
The monitor automatically stores the measurement result in its memory.  
It will automatically turn off after 2 minutes.  
EN  
Note: Wait 2-3 minutes before taking another measurement. Waiting between measurements allows the  
arteries to return to the condition prior to taking a measurement.  
Using the Guest Mode  
The monitor stores measurement values for 2 users in the memory. The guest mode  
can be used to take a single measurement for another user. No measurement values  
are stored in the memory when the guest mode is selected.  
1. Press and hold the START/STOP  
button for more than 3 seconds.  
The USER ID symbol and the Date/Time display will disappear.  
2. Release the START/STOP button when the Date/Time  
display turns off.  
The arm cuff will start to inflate automatically.  
Always consult your physician. Self-diagnosis of measurement results and self-treatment are dangerous. 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
3.4 Using the Memory Function  
The monitor automatically stores the results up to 100 sets for each user (1 and 2).  
It can also calculate an average value based on the last 3 measurement values taken  
within 10 minutes.  
Notes:  
• If there are only 2 measurement values in the memory for that period, the average will be based on these  
2 values.  
• If there is 1 measurement value in the memory for that period, this is displayed as the average.  
• If the memory is full, the monitor will delete the oldest value.  
• When viewing the measurement value taken without setting the date and time, “-/ - -:--” is displayed  
instead of the date and time.  
To View the Measurement Values Stored in Memory  
1. Select your USER ID (1 or 2).  
2. Press the button.  
The Memory number appears for a second before the  
pulse rate is displayed. The newest set is numbered “1”.  
Note: The cuff wrap guide result appears on the display with the  
measurement values. The cuff wrap guide lamp will not light.  
3. Press the or button to view the values stored in the  
memory.  
: To the older values  
: To the more recent values  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
To View the Average Value  
1. Select your USER ID (1 or 2).  
2. Press and hold the button for more  
than 3 seconds.  
EN  
Notes:  
• If the previous measurement was taken without setting the date and time,  
the average value is not calculated.  
• If there are no measurement values stored in the memory, the screen to the  
right is displayed.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
To View the Weekly Average Value  
The monitor calculates and displays weekly averages for the measurements taken in  
the morning and evening within 8 weeks for each user.  
1. SNoetel:eTchte wyeoekubergiUnsSSuEndRay aItD2:0(0.1 or 2).  
2. Press the  
button.  
The morning average for “THIS WEEK” appears on the display.  
Note: The morning hypertension symbol (  
) appears if the morning weekly average is  
above 135/85 mmHg.  
Press the  
button again, and the evening average for “THIS WEEK”  
appears on the display.  
Press the  
or  
button to display the previous weeks.  
This week  
Last week  
2 weeks ago  
7 weeks ago  
Continue to  
press...  
Morning average  
Morning average  
Morning average  
Morning average  
Last week  
This week  
2 weeks ago  
7 weeks ago  
Evening average  
Evening average  
Evening average  
Evening average  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
Note: If there are no measurement values stored in the memory, the  
screen to the right is displayed.  
Morning Weekly Average  
Measurements of the morning  
Tuesday Wednesday Thursday  
EN  
Sunday  
Monday  
Friday  
Saturday  
This is the average for the  
4:00  
measurements taken during the morning  
(4:00 - 11:59) between Sunday and  
Saturday. An average for each day is  
calculated for up to three measurements  
taken within 10 minutes of the first  
measurement of the morning.  
First measurement of  
the morning  
Measurement  
Measurement  
Measurement  
Measurement  
Up to 3 measurements  
Within 10 minutes  
Morning Blood Pressure  
Measurement  
Measurement  
11:59  
Evening Weekly Average  
Measurements of the evening  
Tuesday Wednesday Thursday  
Sunday  
Monday  
Friday  
Saturday  
This is the average for the  
19:00  
measurements taken during the evening  
(19:00 - 1:59) between Sunday and  
Saturday. An average for each day is  
calculated for up to three measurements  
taken within 10 minutes of the last  
measurement of the evening.  
Measurement  
Measurement  
Within 10 minutes  
Measurement  
Measurement  
Measurement  
Measurement  
Up to 3 measurements  
Last measurement of  
the evening  
Evening Blood Pressure  
1:59  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Device  
To Delete All the Values Stored in Memory  
The values stored in the memory are deleted by USER ID.  
1. Select your USER ID (1 or 2).  
2. Press the Memory button, while the memory symbol ( )  
appears.  
3. While holding the button down,  
press the START/STOP button for  
more than 3 seconds.  
Note: You cannot partially delete the values stored in the  
memory. All values for the user you select will be  
deleted.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Error Messages and Troubleshooting  
4.1 Error Messages  
Display  
Cause  
Solution  
Remove the arm cuff. Wait 2-3 minutes and  
then take another measurement.  
Irregular heartbeats are detected.  
Repeat the steps in section 3.3. If this error  
EN  
continues to appear, contact your physician.  
Carefully read and repeat the steps in section  
3.3.  
Movement during measurement.  
Apply the arm cuff tighter.  
Refer to section 3.1.  
Arm cuff is applied too loosely.  
The batteries are low.  
You should replace the batteries with new  
ones ahead of time.  
Refer to section 2.1.  
You should replace the batteries with new  
ones at once.  
Refer to section 2.1.  
The batteries are exhausted.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Error Messages and Troubleshooting  
Display  
Cause  
Air plug is disconnected.  
Solution  
Insert the air plug securely.  
Refer to section 3.1.  
Apply the arm cuff tighter.  
Refer to section 3.1.  
Arm cuff is applied too loosely.  
Air is leaking from the arm cuff.  
Replace the arm cuff with a new one.  
Refer to section 5.3.  
Repeat measurement. Remain still and do not  
talk during measurement.  
Refer to section 3.3.  
Movement during measurement and the arm  
cuff has not been inflated sufficiently.  
If “E2” appears repeatedly, inflate the arm cuff  
manually until it is 30 to 40 mmHg above your  
previous measurement result.  
Refer to section 3.3.  
The arm cuff was inflated above 299 mmHg  
when inflating the arm cuff manually.  
Do not inflate the arm cuff above 299 mmHg.  
Refer to section 3.3.  
Repeat measurement. Remain still and do not  
talk during measurement.  
Refer to section 3.3.  
Movement during measurement.  
Remove any clothing interfering with the arm  
cuff.  
Clothing is interfering with the arm cuff.  
Device error.  
Refer to section 3.1.  
Contact your OMRON retail outlet or  
distributor.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Error Messages and Troubleshooting  
4.2 Troubleshooting  
Problem  
Cause  
Solution  
Apply the arm cuff tighter.  
Refer to section 3.1.  
Arm cuff is applied too loosely.  
Remain still and do not talk during  
measurement.  
Refer to section 3.3.  
EN  
Movement or talking during  
measurement.  
The measurement result is extremely  
high (or low).  
Remove any clothing interfering  
with the arm cuff.  
Refer to section 3.1.  
Clothing is interfering with the arm  
cuff.  
Make sure that the air tube is  
connected securely.  
Refer to section 3.1.  
The air connector is not securely  
connected into the air jack.  
Arm cuff pressure does not rise.  
Arm cuff deflates too soon.  
Replace the arm cuff with a new  
one.  
Air is leaking from the arm cuff.  
The arm cuff is loose.  
Refer to section 5.3.  
Apply the arm cuff correctly so that  
it is firmly wrapped around the arm.  
Refer to section 3.1.  
Inflate the arm cuff so that it is 30 to  
40 mmHg above your previous  
measurement result.  
Cannot measure or the results are  
too low or too high.  
The arm cuff has not been inflated  
sufficiently.  
Refer to section 3.3.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Error Messages and Troubleshooting  
Problem  
Cause  
Solution  
Replace the batteries with new  
ones.  
Refer to section 2.1.  
The batteries are empty.  
Nothing happens when you press the  
buttons.  
Insert the batteries with the correct  
(+/-) polarity.  
Refer to section 2.1.  
The batteries have been inserted  
incorrectly.  
• Press the START/STOP button and repeat measurement.  
• Replace the batteries with new ones.  
Other problems.  
If the problem continues, contact your OMRON retail outlet or distributor.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Maintenance and Storage  
5.1 Maintenance  
To protect your device from damage, please observe the following:  
• Store the device and the components in a clean, safe location.  
• Do not use any abrasive or volatile cleaners.  
• Do not wash the device and any components or immerse them in water.  
• Do not use petrol, thinners or similar solvents to clean the device.  
EN  
• Use a soft and dry cloth, or a soft and moistened cloth and neutral soap to clean on the monitor and the  
arm cuff.  
• Changes or modification not approved by the manufacturer will void the user warranty. Do not  
disassemble or attempt to repair the device or components. Consult your OMRON retail outlet or  
distributor.  
Calibration and Service  
• The accuracy of this device has been carefully tested and is designed for a long service life.  
• It is generally recommended to have the device inspected every 2 years to ensure correct functioning and  
accuracy. Please consult your OMRON retail outlet or distributor.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Maintenance and Storage  
5.2 Storage  
Keep the device in its storage case when not in use.  
1. Unplug the air plug from the air jack.  
2. Gently fold the air tube into the  
arm cuff.  
Note: Do not bend or crease the air tube excessively.  
3. Place the monitor and the arm cuff in the  
storage case.  
Do not store the device in the following situations:  
• If the device is wet.  
• Locations exposed to extreme temperatures, humidity, direct sunlight, dust or  
corrosive vapours.  
• Locations exposed to vibrations, shocks or where it will be at an angle.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Maintenance and Storage  
5.3 Optional Medical Accessories  
(within the scope of EC Medical Device Directive 93/42/EEC)  
Arm cuff  
AC adapter  
Arm circumference 22-42 cm  
EN  
Adapter S-9515336-9  
Easy Cuff L-9911729-4  
(Model: HEM-RML31)  
Adapter UK-9983666-5  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Specifications  
Product description  
Model  
Display  
Automatic Blood Pressure Monitor  
OMRON M6 AC (HEM-7322-E)  
LCD digital display  
Measurement method  
Measurement range  
Oscillometric method  
Pressure: 0 to 299 mmHg  
Pulse: 40 to 180 beats / min.  
Pressure: 3 mmHg  
Accuracy  
Pulse: 5% of display reading  
Fuzzy-logic controlled by electric pump  
Automatic pressure release valve  
100 measurements with date and time for each user (1 and 2)  
DC6V 4W  
Inflation  
Deflation  
Memory  
Rating  
Power source  
4 “AA” batteries 1.5V or optional AC adapter  
(Adapter S-9515336-9, INPUT AC100-240V 50/60Hz 0.12A)  
(Adapter UK-9983666-5, INPUT AC100-240V 50/60Hz 15VA)  
Battery life  
Applied part  
Approximately 1000 measurements (using new alkaline batteries)  
= Type BF  
Protection against electric shock  
Internally powered ME equipment (When using only the batteries)  
= Class II ME equipment (AC adapter)  
Operating temperature/ humidity  
Storage temperature/ humidity/ air pressure  
IP classification  
+10°C to +40°C / 30 to 85% RH  
-20°C to +60°C / 10 to 95% RH / 700-1060hPa  
IP 20  
Monitor: Approximately 380g without batteries  
Arm cuff: Approximately 170g  
Weight  
Outer dimensions  
Monitor: Approximately 124 (w) mm × 90 (h) mm × 161 (l) mm  
Arm cuff: Approximately 145 mm × 594 mm (air tube: 750 mm)  
22 to 42 cm  
Cuff circumference  
Cuff / Tube material  
Package contents  
Nylon, polyester, polyvinyl chloride  
Monitor, arm cuff, instruction manual, storage case, battery set, AC adapter,  
blood pressure pass  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Specifications  
Notes:  
• These specifications are subject to change without notice.  
• In the clinical validation study, the 5th phase was used on 85 subjects for determination of diastolic blood  
pressure.  
• This device has not been validated for use on pregnant patients.  
EN  
• This device fulfils the provisions of EC directive 93/42/EEC (Medical Device Directive).  
• This device is designed according to the European Standard EN1060, Non-invasive  
sphygmomanometers Part 1: General Requirements and Part 3: Supplementary  
requirements for electromechanical blood pressure measuring systems.  
• This OMRON device is produced under the strict quality system of OMRON HEALTHCARE  
Co. Ltd., Japan. The core component for OMRON devices, which is the Pressure Sensor, is  
produced in Japan.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Specifications  
Important information regarding Electro Magnetic Compatibility (EMC)  
With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical devices in  
use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result  
in incorrect operation of the medical device and create a potentially unsafe situation.  
Medical devices should also not interfere with other devices.  
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the aim to prevent unsafe product  
situations, the EN60601-1-2:2007 standard has been implemented. This standard defines the levels of immunity to  
electromagnetic interferences as well as maximum levels of electromagnetic emissions for medical devices.  
This medical device manufactured by OMRON HEALTHCARE conforms to this EN60601-1-2:2007 standard for  
both immunity and emissions.  
Nevertheless, special precautions need to be observed:  
• Do not use mobile (cellular) telephones and other devices, which generate strong electrical or electromagnetic  
fields, near the medical device. This may result in incorrect operation of the device and create a potentially unsafe  
situation. Recommendation is to keep a minimum distance of 7 m. Verify correct operation of the device in case  
the distance is shorter.  
Further documentation in accordance with EN60601-1-2:2007 is available at OMRON HEALTHCARE EUROPE at  
the address mentioned in this instruction manual.  
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment)  
This marking shown on the product or its literature, indicates that it should not be disposed of, with other  
household wastes at the end of its working life. To prevent possible harm to the environment or human  
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it  
responsibly to promote the sustainable reuse of material resources.  
Household users should contact either the retailer where they purchased this product, or their local government  
office, for details of where and how they can take this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the purchase contract. This  
product should not be mixed with other commercial wastes for disposal.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Warranty  
Thank you for buying an OMRON product. This product is constructed of high quality materials and great care has  
been taken in its manufacturing. It is designed to give you every satisfaction, provided that it is properly operated and  
maintained as described in the instruction manual.  
This product is guaranteed by OMRON for a period of 3 years after the date of purchase. The proper construction,  
workmanship and materials of this product is guaranteed by OMRON. During this period of guarantee OMRON will,  
without charge for labour or parts, repair or replace the defect product or any defective parts.  
The guarantee does not cover any of the following:  
a. Transport costs and risks of transport.  
EN  
b. Costs for repairs and / or defects resulting from repairs done by unauthorised persons.  
c. Periodic check-ups and maintenance.  
d. Failure or wear of optional parts or other attachments other than the main device itself, unless explicitly guaranteed  
above.  
e. Costs arising due to non-acceptance of a claim (those will be charged for).  
f. Damages of any kind including personal caused accidentally or from misuse.  
g. Calibration service is not included within the guarantee.  
h. Optional parts have a one (1) year warranty from date of purchase. Optional parts include, but are not limited to the  
following items: Cuff and Cuff Tube, AC Adapter.  
Should guarantee service be required please apply to the dealer whom the product was purchased from or an  
authorised OMRON distributor. For the address refer to the product packaging / literature or to your specialised  
retailer.  
If you have difficulties in finding OMRON customer services, contact us for information.  
Repair or replacement under the guarantee does not give rise to any extension or renewal of the guarantee period.  
The guarantee will be granted only if the complete product is returned together with the original invoice / cash ticket  
issued to the consumer by the retailer.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Some Useful Information about Blood Pressure  
What is Blood Pressure?  
Blood pressure is a measure of the force of blood flowing against the walls of the arteries.  
Arterial blood pressure is constantly changing during the course of the heart’s cycle.  
The highest pressure in the cycle is called the Systolic Blood Pressure; the lowest is the  
Diastolic Blood Pressure. Both pressures, the Systolic and Diastolic, are necessary to enable  
a physician to evaluate the status of a patient’s blood pressure.  
What is Arrhythmia?  
Arrhythmia is a condition where the heartbeat rhythm is abnormal due to flaws in the bio-  
electrical system that drives the heartbeat. Typical symptoms are skipped heartbeats,  
premature contraction, an abnormally rapid (tachycardia) or slow (bradycardia) pulse.  
Why is it a Good Thing to measure Blood Pressure at Home?  
Many factors such as physical activity,  
anxiety, or the time of day, can influence  
your blood pressure. A single  
Upper curve: systolic blood pressure  
Lower curve: diastolic blood pressure  
200  
150  
measurement may not be sufficient for an  
accurate diagnosis. Thus it is best to try  
and measure your blood pressure at the  
same time each day, to get an accurate  
indication of any changes in blood  
pressure. Blood pressure is typically low in  
the morning and increases from afternoon  
100  
50  
6
12  
18  
24  
Time of day  
Example: fluctuation within a day (male, 35 years old)  
30to evening. It is lower in the summer and higher in the winter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OMRON HEALTHCARE Co., Ltd.  
Manufacturer  
53, Kunotsubo, Terado-cho, Muko, Kyoto,  
617-0002 JAPAN  
OMRON HEALTHCARE EUROPE B.V.  
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS  
EU-representative  
Production facility  
Site de production  
Produktionsstätte  
Stabilimento di produzione  
Planta de producción  
Productiefaciliteit  
Uꢏꢐꢚ ꢑꢐꢗꢕꢔꢑꢒꢞꢞꢐꢒꢈꢝꢐꢗꢏꢡ ꢗꢒꢖꢒꢞꢚꢒ  
Üretim Tesisi  
Fc7ꢣ[ ꢤ;3c_  
OMRON HEALTHCARE MANUFACTURING VIETNAM CO., LTD.  
Binh Duong Province, VIETNAM  
Subsidiary  
Empresa filial  
Dochteronderneming  
Zꢚꢖꢚꢡꢖ  
OMRON HEALTHCARE UK LTD.  
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.  
Succursale  
Niederlassung  
Consociata  
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH  
Gottlieb-Daimler-Strasse 10, 68165 Mannheim, GERMANY  
#ꢂꢌꢈ$%ꢍ%ꢊ%ꢁ  
OMRON SANTÉ FRANCE SAS  
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE  
Uniquement pour le marché français: OMRON Service Après Vente  
Nº Vert 0 800 91 43 14  
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢅꢉꢊꢋꢂꢃꢁꢌꢆꢁ2ꢃꢁꢋ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop CS 1011 User Manual
Milwaukee Building Set Mi 456 User Manual
MotoSAT Satellite TV System XF3 User Manual
NDC comm Network Card CompuFax User Manual
Nikon Photo Scanner 9000ED User Manual
NuTone Fan QTREN080FLT User Manual
Onkyo Stereo Receiver TX SR876 User Manual
OPTI UPS Power Supply ES550C User Manual
Palsonic CRT Television 5125PF User Manual
Panasonic Power Supply A4P Series User Manual