MultiSync MT840E/MT1040E/MT1045E
LCD Projector
User’s Manual
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
These safety instructions are to ensure the long life of
your projector and to prevent fire and shock.Please read
them carefully and heed all warnings.
CAUTION
Do not unplug the power cable from the wall outlet under any
one of the following circumstances. Doing so can cause damage
to the projector:
* While the Hour Glass icon appears.
Installation
* While the message "Please wait a little." appears. This mes-
sage will be displayed after the projector is turned off.
* Immediately after the power cable is plugged into the wall
outlet (the POWER indicator has not changed to a steady amber
glow).
* Immediately after the cooling fan stops working (The cooling
fan continues to work for ONE minute after the projector is
turned off with the POWER OFF button).
1. For best results, use your projector in a darkened room.
2. Place the projector on a flat, level surface in a dry area away
from dust and moisture.
3. Do not place your projector in direct sunlight, near heaters
or heat radiating appliances.
4. Exposure to direct sunlight, smoke or steam can harm in-
ternal components.
* While the POWER and the STATUS indicators are alternately
flashing.
5. Handle your projector carefully.Dropping or jarring can dam-
age internal components.
6. Do not place heavy objects on top of the projector.
7. If you wish to have the projector installed on the ceiling:
a. Do not attempt to install the projector yourself.
b. The projector must be installed by qualified technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
c. In addition, the ceiling must be strong enough to support
the projector and the installation must be in accordance
with any local building codes.
d. Please consult your dealer for more information.
Power Supply
1. The projector is designed to operate on a power supply of
100-120 or 200-240V 50/60 Hz AC. Ensure that your power
supply fits this requirement before attempting to use your
projector.
2. Handle the power cable carefully and avoid excessive bend-
ing. A damaged cord can cause electric shock or fire.
3. If the projector is not to be used for an extended period of
time, disconnect the plug from the power outlet.
Cleaning
1. Unplug the projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily
soiled, use a mild detergent. Never use strong detergents
or solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean the lens, and be careful
not to scratch or mar the lens.
E–3
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Replacement
•
To replace the lamp, follow all instructions provided on page
E-33.
•
Be sure to replace the lamp when the Status light comes
on. If you continue to use the lamp after 2000 hours (1500
hours : MT1045) of use, the lamp bulb may shatter, and
pieces of glass may be scattered in the lamp case. Do not
touch them as the pieces of glass may cause injury. If this
happens, contact your NEC dealer for lamp replacement.
•
Allow a minimum of ONE minute to elapse after turning off
the projector.Then disconnect the power cable and allow 60
minutes to cool the projector before replacing the lamp.
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are
unobstructed to prevent the build-up of heat inside your pro-
jector.Allow at least 3 inches (10cm) of space between your
projector and a wall.
2. Prevent foreign objects such as paper clips and bits of pa-
per from falling into your projector. Do not attempt to re-
trieve any objects that might fall into your projector. Do not
insert any metal objects such as a wire or screwdriver into
your projector. If something should fall into your projector,
disconnect it immediately and have the object removed by a
qualified NEC service personnel.
3. Do not place any liquids on top of your projector.
•
•
Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
Keep any items such as magnifying glass out of the light
path of the projector.The light being projected from the lens
is extensive, therefore any kind of abnormal objects that
can redirect light coming out of the lens, can cause unpre-
dictable outcome such as fire or injury to the eyes.
•
•
Do not cover the lens with the supplied lens cap or equiva-
lent while the projector is on. Doing so can lead to melting of
the cap and possibly burning your hands due to the heat
emitted from the light output.
Do not look into the laser pointer while it is on and do not
point the laser beam at another person.Serious injury could
result.
E–4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1. INTRODUCTION
Setup..................................................................... E-23
Orientation ........................................................ E-23
Background ...................................................... E-23
Signal Select..................................................... E-23
Auto Start ......................................................... E-23
Power Management.......................................... E-23
Power Off Confirmation .................................... E-23
Mouse Settings................................................. E-23
Keystone Save.................................................. E-23
Fan High Speed Mode...................................... E-23
Clear Lamp Hour Meter .................................... E-23
Remote Sensor................................................. E-24
S-Video Mode Select ........................................ E-24
PC Card Viewer Options................................... E-24
Capture Options ............................................... E-24
Introduction to the MultiSync MT840/MT1040/MT1045 Projector ... E-6
Getting Started ............................................................ E-6
Getting to Know Your MultiSync MT840/MT1040/MT1045 Projector ..... E-7
Front Features......................................................... E-7
Rear Features ......................................................... E-7
Top Features ........................................................... E-8
Terminal Panel Features ......................................... E-9
Remote Control Features ...................................... E-10
2. INSTALLATION
Setting Up Your Projector........................................... E-12
Selecting a Location .................................................. E-12
Using a Tabletop or Cart ............................................ E-12
Distance Chart........................................................... E-13
Ceiling Installation ..................................................... E-14
Reflecting the Image.................................................. E-14
Wiring Diagram .......................................................... E-15
Tools .......................................................................... E-24
Capture ................................................................. E-24
PC Card Files........................................................ E-25
ChalkBoard ........................................................... E-25
3. OPERATION
General Controls ....................................................... E-17
Using the Menus........................................................ E-17
Using a USB Mouse .................................................. E-17
Menu Tree .................................................................. E-18
Menu Elements.......................................................... E-19
Menu Descriptions & Functions ................................. E-20
Source Select ............................................................ E-20
RGB ...................................................................... E-20
Video/S-Video ....................................................... E-20
PC Card Viewer..................................................... E-20
Adjustments ............................................................... E-20
Picture ................................................................... E-20
Volume .................................................................. E-20
Image .................................................................... E-20
Auto Adjust ....................................................... E-21
Position ............................................................. E-21
Pixel Adjust ....................................................... E-21
Resolution......................................................... E-21
Color Temperature ................................................ E-21
Keystone ............................................................... E-21
Help ........................................................................... E-25
Contents................................................................ E-25
Source Information................................................ E-25
Projector Information............................................. E-25
Using the PC Card Viewer Function .......................... E-26
Features ................................................................ E-26
Inserting and Ejecting a PC Card ......................... E-26
Installing the PC Card Viewer
Software ................................................................ E-27
Starting Up the PC Card Viewer Software
on your PC (PC Card Viewer Utility 1.0) ............. E-27
Operating the PC Card Viewer Function
from the Projector (playback) .............................. E-28
Capturing Images Displayed on the Projector....... E-30
Viewing Digital Images.......................................... E-31
Uninstalling the PC Card Viewer Software ............ E-31
Terminology........................................................... E-32
4. MAINTENANCE
Factory Default ...................................................... E-21
Image Options ........................................................... E-21
Image Mode .......................................................... E-21
Aspect Ratio ..................................................... E-21
Video Mode ........................................................... E-22
Gamma ............................................................. E-22
Noise Reduction ............................................... E-22
Color Matrix ...................................................... E-22
Replacing the Lamp................................................... E-33
Remote Control Battery Installation........................... E-34
Cleaning or Replacing the Filters .............................. E-34
5. TROUBLESHOOTING
Status Light Messages .............................................. E-35
Common Problems & Solutions................................. E-35
6. SPECIFICATIONS
Projector Options ....................................................... E-22
Menu ..................................................................... E-22
Language ......................................................... E-22
Projector Pointer ............................................... E-22
Source Display ................................................. E-22
Optical/Electrical/Mechanical..................................... E-37
Cabinet Dimensions .................................................. E-38
D-Sub Pin Assignments............................................. E-40
Timing Chart .............................................................. E-41
PC Control Codes...................................................... E-42
Cable Connection ...................................................... E-42
E–5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. INTRODUCTION
Introduction to the MultiSync MT840/MT1040/MT1045 Projector
This section introduces you to your new MultiSync MT840 (SVGA)/
MT1040 and MT1045 (XGA) Projector describes the features and
controls.
• The supplied remote control can be used without a cable, and
you can even use the remote control and mouse adapter to oper-
ate your PC or Macintosh mouse wirelessly from across the room
with the built-in remote mouse receiver.
• You can control the projector with a PC using the PC Control
port.
• The contemporary cabinet design is light, compact, easy to carry,
and complements any office, boardroom or auditorium.
• Eight kinds of pointers are available for your presentation.
• USB terminal allows USB mouse operation*4.
Congratulations on Your Purchase of The MultiSync MT840/
MT1040/MT1045 Projector
The MultiSync MT840/MT1040/MT1045 is one of the very best pro-
jectors available today. The MultiSync MT840/MT1040/MT1045 en-
ables you to project precise images up to 300 inches across (mea-
sured diagonally) from your PC or Macintosh computer (desktop or
notebook), VCR, DVD player, document camera, or even a laser disc
player.
You can use the projector on a tabletop or cart, you can use the pro-
jector to project images from behind the screen, and the projector can
be permanently mounted on a ceiling*1. The remote control can be
used wirelessly.
*1 Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order
to ensure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the pro-
jector and the installation must be in accordance with any local
building codes. Please consult your dealer for more information.
*2 An XGA image (1024
ן 768) is converted into an 800ן 600 crisp image with NEC technology’s Advanced AccuBlend on MT840.
*3 An SXGA image (1280
ן 1024) is converted into a 1024ן 768 crisp image with NEC technology’s Advanced AccuBlend on
MT1040/MT1045.
Features you’ll enjoy:
• Simple set up and operation.
• Hot air blown from the vents does not bother the audience dur-
ing your presentation since the vents are located on the front.
• A high-performance 180 watt NSH (200W NSH : MT1045)
lamp.
*4 The USB terminal meets the USB1.0 specification and accepts a
USB mouse only.
• The supplied wireless remote control that operates the projector
from any angle.
• The manual zoom control enables you to adjust the image to be
between 30 (0.76m) and 300 inches (7.6m) (measured diago-
nally).
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Take a few minutes now to click through the CD-
ROM and review the user’s manual. This may save you time later on.
At the beginning of each section of the manual you’ll find an over-
view. If the section doesn’t apply, you can skip it.
• Keystone correction allows you to correct trapezoidal distortion
so that the image is square.
• You can choose between video modes depending on your source:
“normal” for a typical picture, “natural” for true color reproduc-
tion.
• The built-in PC Card Viewer allows you to start your presenta-
tion even when a PC is not available at the site.
• The “Capture” enables you to use the entire picture as a back-
ground image or to create slides.
• An image can be projected from in front or behind a screen, and
the projector can even be installed on the ceiling.
• NEC Technologies’ exclusive Advanced AccuBlend intelligent
pixel blending technology - an extremely accurate image com-
pression technology - offers a crisp image with SXGA (1280 x
1024) resolution*3 . You can select any point on the screen with
the pointer and enlarge the selected area.
• Supports most IBM VGA, SVGA, XGA*2 , SXGA(with Ad-
vanced AccuBlend)*3, Macintosh, component signal (YCbCr /
YPbPr) or any other RGB signals within a horizontal frequency
range of 15 to 85 kHz and a vertical frequency range of 50 to 85
Hz. This includes NTSC, PAL, PAL60, SECAM and NTSC4.43
standard video signals.
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
E–6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know Your MultiSync MT840/MT1040/MT1045 Projector
Front Features
Controls
Zoom
USB (Mouse) Terminal
Remote Sensor
Air-Filter
P O W E R
S T A T U S
O N
O F F
T N E
E
R
/
C
A
N
S E L E C T
C
E
L
S O U R C E
M
E
N
U
USB
A U T
A D J U S T
Remote Sensor
PC Card Access Slot
Slot for Kensington
MicroSaver Security System
AC Input
Connectthesuppliedpower
AC IN
cable’s three-pin plug here.
Air-Filter
Lens
Terminal Panel
Adjustable Tilt Foot
Carrying Handle
Focus
Ventilation (outlet)
Rear Features
Remote Sensor
Built-In Stereo Speaker (1W)
ADJUST
AUTO
U
N
E
M
SOURCE
L
E
C
SELECT
AN
C
OFF
/
R
E
N
T
E
ON
STATUS
POWER
One-Touch Tilt Button
Rear Foot
Remote Sensor
Lamp Cover
Lamp Cover Screw
Built-In Stereo Speaker (1W)
Rear Foot
E–7
Download from Www.Somanuals.com. All Manuals Search And Download.
Top Features
1
2
SOURCE
AUTO ADJUST
3
4
6
SELECT
5
7
8
9
STATUS
POWER
ON/OFF
1 Source Button
6 Cancel Button
Use this button to select a video source such as a PC, VCR, DVD
player or PC Card Viewer (PC card installed).
Press this button to exit “Menus”. Press this button to return the
adjustments to the last condition while you are in the adjustment
or setting menu.
2 Auto Adjust Button
Use this button to adjust Position-H/V and Pixel Clock/Phase for
an optimal picture. Some signals may not be displayed correctly or
take time to switch to another.
7 Status Indicator
When this is lit red continually, it’s warning you that the projection
lamp has exceeded 2000 hours (1500 hours : MT1045) of service.
After this light appears, it is advisable to replace the projection
lamp as soon as possible. (See page E-33)
3 Menu Button
Displays the main menu for operation.
In addition the message “LAMP USAGE XX HOURS” appears
continually when the on-screen menu is not displayed. If this light
blinks red rapidly, it indicates that the lamp cover or filter cover is
not attached properly or the projector is overheated. See the Status
Light Messages on page E-35 for more details.
4 Select (▲▼ᮤ ᮣ) / (+) (–) Buttons
▲▼: Use these buttons to select the menu of the item you wish
to adjust.
ᮤ ᮣ: Use these buttons to change the level of a selected menu
item.
8 Power Indicator
A press of the ᮣ button executes the selection. When no menus
appear, these ▲▼ buttons work as a volume control.
When the pointer is displayed, these ᮤ ᮣ ▲▼ buttons move the
pointer.
When this indicator is green, the projector is on; when the indica-
tor is amber, it is in standby mode.
9 Power Button
Use this button to turn the power on and off when the power is
supplied and the projector is in standby mode.
5 Enter Button
Executes your menu selection and activates items selected from
the menu.
NOTE: To turn off the projector, press and hold this button for mini-
mum of two seconds.
E–8
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminal Panel Features
5
6
1
2
3
7
MOUSE
OUTPUT
REMOTE
CONTROL
INPUT
PC CONTROL
USB
4
AUDIO MONITOR
OUTPUT
RGB OUTPUT
RGB INPUT
SELECT
UST
E
N
E
9
R
8
C
A
N
C
E
L
ON
/
OFF
PC-CARD
AUDIO
10
USB
S-VIDEO
/
L MONO
R
VIDEO
Slot for Kensington
MicroSaver Security System
14
11
12
13
1 USB (Mouse) Terminal
10 RGB Audio Input Connector
Connect a commercially available mouse that supports USB.
You can operate the menu or Viewer with the USB mouse via this
terminal.
Note that this terminal is not used with a computer and that there
may be some brands of USB mouse.
This is where you connect RGB audio output from a computer or
another RGB source.
RGB Input Connector(Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable
that’s supplied to connect to a PC.
2 PC Card Access Slot
Insert a PC card here.
11 S-Video Input Port
Here is where you connect the S-Video input from an external source
like a VCR.
3 PC Card Access Indicator
Lights while accessing a PC card.
12 Left Channel/Mono Audio Input Jack (RCA)
This is the left channel audio input for stereo sound coming from
video equipment or audio system. This also serves as your monau-
ral audio input. (Video and S-video only)
4 Eject Button
Press to eject a PC memory card.
5 PC Control Port (Mini DIN 8 Pin)
Use this port to connect your PC to control your projector.
A cap is put on the port at the factory. Remove the cap when using
the port.
Right Channel Audio Input Jack (RCA)
This is the right channel audio input for stereo sound. (Video and
S-video only)
NOTE: When using two Video sources simultaneously, the Left
Channel Audio Input jack is available for the S-Video source only
and the Right Channel Audio Input jack is available for the com-
posite video source only.
6 Mouse Output Port (Mini DIN 8 Pin)
Use this port to operate your computer’s mouse functions from the
remote control.
7 Remote Control Input Jack
Connect your remote control cable here for wired operation.
13 Video Input
Connect a VCR, DVD player, laser disc player, or document cam-
era here to project video.
8 Audio Monitor Output Mini Jack
Connect additional external speakers here to listen to audio com-
ing from your computer, Video or S- Video input.
14 Built-in Security Slot (
)
This security slot supports the MicroSaver® Security System.
MicroSaver® is a registered trademark of Kensington Microware
Inc. The logo is trademarked and owned by Kensington Microware
Inc.
9 RGB Monitor Output Connector (Mini D-Sub 15 pin)
You can use this connector to loop your computer image to an
external monitor from the RGB input source.
E–9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control Features
NOTE: If you are using a Macintosh computer, you can click either
the right or left button to activate the mouse.
16
11
1 Source Button
Press to select a video source.
15
2 Auto Adjust Button
POWER
PJ
Use this button to adjust Position-H/V and Pixel Clock/Phase for
an optimal picture. Some signals may not be displayed correctly,
or in some cases it may take some time for a source to be switched
to another.
OFF
ON
12
13
COMPUTER
SOURCE
S
PROJECTOR
AUTO ADJ.
A
3 Menu Button
Displays the main menu for operation.
1
2
4 Mouse (▲▼ᮤ ᮣ) / (+) (–) Buttons
▲▼: Use these buttons to select the menu of the item you wish
to adjust.
LASER
14
MENU
3
ᮤ ᮣ: Use these buttons to change the level of a selected menu
item.
-
+
A press of the ᮣ button executes the selection. When no menus
appear, these ▲▼ buttons work as a volume control. For the Mouse
button to work as the volume control for your computer, you must
be in the Projector mode, which is indicated by lighting the Com-
puter/Projector Select button.
6
4
5
8
(Underneath)
CANCEL
R-CLICK
HELP POINTER PIC-MUTE
When the pointer is displayed, these ᮤ ᮣ ▲▼ buttons move the
pointer.
?
9
NOTE:Works as a mouse for your projected computer image. This
pad is also used to adjust position. This pad selects the submenu
you want to adjust. After you make your on-screen menu selection,
use this pad to adjust the level up or down.
MAGNIFY
+
-
7
5 Cancel/ Right Click Button
10
Press this button to exit “Menus”. Press this button to return the
adjustments to the last condition while you are in the adjustment
or setting menu.
6 Left Click / Enter Button
Use this button to enter your menu selection. It works the same as
the “Enter” button on the cabinet.
Remote Jack
Connect your remote control
cable here for wired operation.
7 Magnify Button
Use the (+) or (–) button to adjust the image size up to 400%.
When the Pointer is displayed, the magnified image is displayed at
the center of the Pointer. When the Pointer is not displayed, the
magnified image is displayed at the center of the screen.
When the image is magnified, the pointer is changed to the magni-
fying icon.
16
8 Pointer Button
Press this button to display one of the eight pointers; press again to
hide the pointer. You can move your pointer icon to the area you
want on the screen using the Mouse button.
6
15
E–10
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Picture Mute Button
This button turns off the image and sound for a short period of
time. Press again to restore the image and sound.
Operating Range
10 Help Button
Provides information about operation and adjustment procedures
or the set information for the current menu or adjustment during
menu operation. This also displays information how to use the Help.
11 Power On And Off
If power is applied, you can use this button to turn your projector
on and off.
7m
NOTE: To turn off the projector, press and hold the POWER OFF
button for a minimum of two seconds.
12 LED
Flashes when any button is pressed.
13 Computer/Projector Select
Use this button to switch between “Computer” and “Projector”.
When “Computer” is selected, the remote control works as your
computer mouse. In this mode only Mouse pad, Laser, R-Click
and L-Click buttons are available. This button lights to indicates
that you are in the Projector mode.
14 Laser Button
Press and hold this button to activate the laser pointer. When lit,
you can use the laser to draw your audience’s attention to a red dot
that you can place on any object within 30 feet (10 m).
15 Laser Pointer
Beams a laser light when “Laser” button is pressed.
16 Infrared Transmitter
Direct the remote control toward the remote sensor on the projec-
tor cabinet.
NOTE: When either the Menu, Help or Pointer button is pressed, the
Computer/Projector Select button lights in red to indicate that your
projector is in the Projector mode. If no buttons are pressed within
10 seconds, the light goes out and the Projector mode is canceled.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, re-
move the battery.
• Do not place the batteries upside down.
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
E–11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLATION
This section describes how to set up your MultiSync MT840/MT1040/
MT1045 projector and how to connect video and audio sources.
2. Connect the power cable, remove the lens cap and turn the projec-
tor on. (If no input signal is available, the projector will display a
background image.)
3. Ensure that the projector is square to the screen.
Setting up Your Projector
Your MultiSync MT840/MT1040/MT1045 Projector is simple to set
up and use. But before you get started, you must first:
1. Determine the image size.
Top view
Screen
2. Set up a screen or select a non-glossy white wall onto which you
can project your image.
Carrying the Projector: Always carry your projector by the handle.
Ensure that the power cable and any other cables connecting to video
sources are disconnected before moving the projector.
When moving the projector or when it is not in use, cover the lens
with the lens cap.
Carrying handle
S B
4. Move the projector left or right to center the image horizontally
on the screen.
O
/
ON
L
E
C
N
A
C
5. To center the image vertically, lift the front edge of the projector
and press the One-Touch Tilt button on the front-left side of the
projector to release the Front Adjustable foot.
AJDUST
R
A
E
SELCT
U
N
E
POWER
AUTS
M
SUORCE
Screen
Side view
ACIN
Attaching the lens cap to the lens hood
with the supplied string and rivet.
(There is approximately 5 degrees of up and down adjustment for
the front of the projector.)
Rivet
Adjusting the Tilt Foot
Lens cap
String
F F
O F F
O / N O
/
O N
L
E C N
A
L
E C N
A
C
C
E R
W
P O
S T A T U S
R
E
P O W E R
S T A T U S
R
E
T
T
N
T
N
E
S E L E C T
S E L E C
A D J U S T
A U T O
S T
J U
U
N
A D
T O
E
U
M
N
A U
E
M
S O U R C E
R C E
U
S O
A
C
I
N
A
C
I
N
Press and hold the Tilt but-
ton on the left side of the
projector.
Lift the front edge of the projec-
tor to the height you want, and
release the button to lock the
Adjustable Tilt Foot.
Selecting a Location
The further your projector is from the screen or wall, the larger the
image. The minimum size the image can be is approximately 30"
(0.76 m) measured diagonally when the projector is roughly 4 feet
(1.3 m) from the wall or screen. The largest the image can be is 300"
(7.6 m) when the projector is about 36.8 feet (11.2 m) from the wall
or screen.
To fine-tune the image’s position vertically on the screen,
rotate the foot. Each of the rear feet height can be changed
up to 0.6” (4mm).
6. If the projected image does not appear square to the screen then
use keystone correction for proper adjustment.
Using a Tabletop or Cart
1. Place your projector on a flat level surface at the optimal distance
from the screen or wall so you realize the size image you want.
(Avoid having bright room lighting or sun light directly on the
screen or wall where you’ll be projecting the image.)
7. Adjust the size of the image using the Zoom ring on the lens.
E–12
Download from Www.Somanuals.com. All Manuals Search And Download.
Distance Chart
Throwing Distance (S)
Screen (inch)
Screen Top
H
D
V
Screen center
V
Q
R
Throwing Angle (U)
P=2.89”(73.5mm)
Projector foot
Lens Center
Screen Bottom
MT840
Screen Size D
Diagonal
Width(H)
Width(V)
(inch)
(inch)
(inch)
30
24
18
40
32
24
60
48
36
80
64
48
100
80
60
120
96
72
150
120
90
180
144
108
200
160
120
240
192
144
300
240
180
Magnification K
Throwing Distance S
23.1
42.2
1071.1
51.0
1296.3
10.4
8.6
18.0
457.2
7.7
196.2
1.3
32.4
2.9
73.5
10.6
269.7
30.8
57.0
1446.5
68.8
1746.9
10.2
8.5
46.2
86.5
2197.5
104.3
2648.0
10.1
8.4
61.5
116.1
2948.4
139.7
3549.2
10.1
8.4
76.9
145.6
3699.4
175.2
4450.3
10.0
8.4
92.3
175.2
4450.4
210.7
5351.4
10.0
8.3
115.4
219.6
5576.8
263.9
6703.1
10.0
8.3
138.5
263.9
6703.2
317.1
8054.8
10.0
8.3
108
2743.2
46.3
1177.0
7.7
194.6
2.9
73.5
49.2
1250.5
153.9
293.5
7454.2
352.6
184.6
352.6
8956.1 11208.9
423.6 530.0
230.8
441.3
Wide
Tele
(inch)
(mm)
(inch)
(mm)
(degree)
(degree)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
8956.0 10758.2 13461.6
10.0
8.3
Throwing Angle U
Wide
Tele
9.9
8.3
144
3657.6
61.8
1569.3
10.2
259.5
2.9
73.5
64.7
1642.8
9.9
8.3
180
4572
77.2
1961.7
12.8
324.3
2.9
73.5
80.1
2035.2
V
Q
24
36
48
60
72
90
120
609.6
10.3
261.6
1.7
43.2
2.9
73.5
13.2
335.1
914.4
15.4
392.3
2.6
64.9
2.9
73.5
18.3
465.8
1219.2
20.6
523.1
3.4
86.5
2.9
73.5
23.5
596.6
1524
25.7
653.9
4.3
108.1
2.9
73.5
28.6
727.4
1828.8
30.9
784.7
5.1
129.7
2.9
73.5
33.8
858.2
2286
38.6
980.8
6.4
162.2
2.9
73.5
41.5
1054.3
3048
51.5
1307.8
8.5
216.2
2.9
73.5
54.4
1381.3
R
P
Q+P
MT1040
Screen Size D
Diagonal
Width(H)
Width(V)
(inch)
(inch)
(inch)
30
24
18
40
32
24
60
48
36
80
64
48
100
80
60
120
96
72
150
120
90
180
144
108
200
160
120
240
192
144
300
240
180
Magnification K
Throwing Distance S
22.9
41.8
1062.2
50.6
1285.7
10.4
8.6
18.0
457.2
7.7
194.6
1.3
34.0
2.9
73.5
10.6
268.1
30.5
56.5
1434.7
68.2
1732.7
10.3
8.5
45.8
85.8
2179.8
103.4
2626.7
10.1
8.4
61.1
115.1
2924.8
138.6
3520.8
10.1
8.4
76.3
144.5
3669.8
173.8
4414.8
10.0
8.4
91.6
173.8
4414.9
209.0
5308.9
10.0
8.3
114.5
217.8
5532.4
261.8
6649.9
10.0
8.3
137.4
261.8
6650.0
314.6
7991.0
10.0
8.3
108
2743.2
46.0
1167.7
8.0
203.9
2.9
73.5
48.9
1241.2
152.6
291.1
7395.0
349.8
183.2
349.8
8885.1 11120.3
420.2 525.8
229.0
437.8
Wide
Tele
(inch)
(mm)
(inch)
(mm)
(degree)
(degree)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
8885.0 10673.1 13355.2
10.0
8.3
Throwing Angle U
Wide
Tele
9.9
8.3
144
3657.6
61.3
1557.0
10.7
271.8
2.9
73.5
64.2
1630.5
9.9
8.3
180
4572
76.6
1946.2
13.4
339.8
2.9
73.5
79.5
2019.7
V
Q
24
36
48
60
72
90
120
609.6
10.2
259.5
1.8
45.3
2.9
73.5
13.1
333.0
914.4
15.3
389.2
2.7
68.0
2.9
73.5
18.2
462.7
1219.2
20.4
519.0
3.6
90.6
2.9
73.5
23.3
592.5
1524
25.5
648.7
4.5
113.3
2.9
73.5
28.4
722.2
1828.8
30.6
778.5
5.4
135.9
2.9
73.5
33.5
852.0
2286
38.3
973.1
6.7
169.9
2.9
73.5
41.2
1046.6
3048
51.1
1297.5
8.9
226.5
2.9
73.5
54.0
1371.0
R
P
Q+P
MT1045
Screen Size D
Diagonal
Width(H)
Width(V)
(inch)
(inch)
(inch)
30
24
18
40
32
24
60
48
36
80
64
48
100
80
60
120
96
72
150
120
90
180
144
108
200
160
120
240
192
144
300
240
180
Magnification K
Throwing Distance S
22.9
41.4
1052.6
50.8
1290.5
10.5
8.6
18
457.2
7.7
194.6
1.3
34.0
2.9
73.5
10.6
268.1
30.5
56.3
1430.3
68.6
1743.7
10.3
8.5
45.8
86.1
2185.8
104.3
2649.9
10.1
8.4
61.1
115.8
2941.2
140.0
3556.2
10.0
8.3
76.3
145.5
3696.6
175.7
4462.4
10.0
8.3
91.6
175.3
4452.1
211.4
5368.7
9.9
114.5
219.9
5585.2
264.9
6728.0
9.9
137.4
264.5
6718.4
318.4
8087.4
9.9
8.2
108
2743.2
46.0
1167.7
8.0
203.9
2.9
73.5
48.9
1241.2
152.6
294.2
7473.8
354.1
183.2
353.7
8984.7 11251.0
425.4 532.5
229.0
443.0
Wide
Tele
(inch)
(mm)
(inch)
(mm)
(degree)
(degree)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
(inch)
(mm)
8993.7 10806.2 13524.9
9.8
8.2
Throwing Angle U
Wide
Tele
9.8
8.2
144
3657.6
61.3
1557.0
10.7
271.8
2.9
73.5
64.2
1630.5
9.8
8.2
180
4572
76.6
1946.2
13.4
339.8
2.9
73.5
79.5
2019.7
8.3
72
8.2
90
V
Q
24
36
48
60
120
609.6
10.2
259.5
1.8
45.3
2.9
73.5
13.1
333.0
914.4
15.3
389.2
2.7
68.0
2.9
73.5
18.2
462.7
1219.2
20.4
519.0
3.6
90.6
2.9
73.5
23.3
592.5
1524
25.5
648.7
4.5
113.3
2.9
73.5
28.4
722.2
1828.8
30.6
778.5
5.4
135.9
2.9
73.5
33.5
852.0
2286
38.3
973.1
6.7
169.9
2.9
73.5
41.2
1046.6
3048
51.1
1297.5
8.9
226.5
2.9
73.5
54.0
1371.0
R
P
Q+P
NOTE: Distances may vary +/–5%.
E–13
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceiling Installation
Screen top
Projector Foot
R
Q
P=2.89”(73.5mm)
Lens Center
Throwing Angle (U)
V
Screen center
Screen Bottom
Throwing Distance (S)
If your projector is mounted on the ceiling and your image is upside
down, use the “Menu” and “Select” buttons on your projector cabi-
net or ▲▼ button on your remote control to correct the orientation.
(See page E-23.)
WARNING
• Installing your projector on the ceiling must be done by a quali-
fied technician. Contact your NEC dealer for more informa-
tion.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If the projec-
tor falls to the ground, you can be injured and the projector
severely damaged.
• Do not use the projector where temperatures vary greatly. The
projector must be used at temperatures between 32˚F (0˚C)
and 104˚F (40˚C).
Reflecting the Image
Using a mirror to reflect your projector’s image enables you to enjoy
a much larger image. Contact your NEC dealer if you need a mirror.
If you’re using a mirror and your image is inverted, use the “Menu”
and “Select” buttons on your projector cabinet or ▲▼ buttons on
your remote control to correct the orientation. (See page E-23.)
• Do not expose the projector to moisture, dust, or smoke. This
will harm the screen image.
• Ensure that you have adequate ventilation around your pro-
jector so heat can dissipate. Do not cover the vents on the side
or the front of the projector.
E–14
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied serial cable
Supplied mouse adapter (For Macintosh)
Macintosh or Compatibles
(Desktop type or notebook type)
Wiring Diagram
MOUSE
OUTPUT
REMOTE
CONTROL
INPUT
PC CONTROL
Pin adapter for Macintosh
(supplied)
IBM VGA or Compatibles
AUDIO MONITOR
OUTPUT
(Desktop type or notebook type)
Supplied mouse adapter
(For IBM PS/2)
RGB OUTPUT
RGB INPUT
AUDIO
Monitor
S-VIDEO
/
L MONO
R
Signal cable (supplied)
VIDEO
To mini D-Sub 15-pin connector on the projector. It is
recommended that you use a commercially available
distribution amplifier if connecting a signal cable longer
than the supplied one.
Optional Component V cable
To video, S-video, and audio
inputs on the projector.
DVD Player (with component output)
Document Camera
VCR, DVD Player or LaserDisc Player
NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the
notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.
2. Use the signal cable that’s supplied to connect your PC or
Macintosh computer to the projector. For older Macintosh, use
the supplied pin adapter to connect to your Mac's video port.
Remote Control Guideline for the Remote Control
1. Plug the supplied serial cable with the mouse output port of the
projector into your computer’s mouse port and restart your com-
puter to gain remote mouse control.
2. When using the remote control’s built-in infrared mouse on a laptop
computer, the laptop’s mouse, trackball or trackpad will be dis-
abled. Disconnect the serial cable from the mouse output port and
restart your computer to regain trackball or trackpad mouse con-
trol.
NOTE:The new Macintosh computer such as G3 will have the 15
pin HD connector. The MT840/MT1040/MT1045's "Plug and Play"
data will be downloaded to the Macintosh. Therefore, the Mac
adapter will not be necessary.
3. Turn on the projector and the computer.
4. If the projector goes blank after a period of inactivity, it may be
caused by a screen saver installed on the computer you’ve con-
nected to the projector.
3. If the screen goes blank while using your remote control, it may
be the result of the computer’s screen-saver or power manage-
ment software.
4. If you accidentally hit the OFF button on the remote control, wait
one full minute and then press the ON button to resume.
Connecting An External Monitor
You can connect a separate, external monitor to your projector to
simultaneously view on a monitor the image you're projecting. To do
so:
1. Turn off the power to your projector, monitor and computer, docu-
ment camera or video source.
2. Use a 15-pin cable to connect your monitor to the RGB Monitor
Output (Mini D-Sub 15 pin) connector on your projector.
3. Turn on the projector, monitor and the computer, document cam-
era or video source.
ConnectingYour PC or Macintosh Computer
Connecting your PC or Macintosh computer to your MultiSync
MT840 (SVGA)/MT1040 and MT1045 (XGA) projector will enable
you to project your computer’s screen image for an impressive pre-
sentation.
To connect to a PC or Macintosh, simply:
1. Turn off the power to your projector and computer.
E–15
Download from Www.Somanuals.com. All Manuals Search And Download.
When using a Macintosh with the projector, set the DIP switches of
the supplied pin adapter according to your resolution. After setting,
restart your Macintosh.
3. Turn on the projector and the DVD player.
NOTE: Refer to your DVD player’s owner’s manual for more infor-
mation about your DVD player’s video output requirements.
See the following pages for setting of the DIP switches.
• When using with a Macintosh, SVGA(800
ן 600 :MT840)/ XGA(1024
ן 768 : MT1040/MT1045) is recommended if your Macintosh supports this mode.
• When using with a Macintosh PowerBook, output may not be
set to 800
ן 600 unless “mirroring” is off on your PowerBook. Refer to owner’s manual supplied with your Macintosh com-
puter for mirroring.
ConnectingYour VCR Or Laser Disc Player
Use common RCA cables (not provided) to connect your VCR or
laser disc player to your projector. To make these connections, sim-
ply:
1. Turn off the power to the projector and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector
on the back of your VCR or laser disc player, connect the other
end to theVideo input on your projector. Use standard RCA audio
patch cords to connect the audio from your VCR or laser disc
player to the projector (if your VCR or laser disc player has this
capability). Be careful to keep your right and left channel connec-
tions correct for stereo sound.
NOTE: A Video Adapter cable manufactured by Apple Computer is
needed for a PowerBook which does not have a mini D-Sub 15-pin
connector.
Settings for Monitor Mode
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner’s manual for
more information about your equipment’s video output requirements.
Number of DIP switch
1
2
3
4
5
6
Resolution
13" multi-scan mode /16"-13"
17" multi-scan mode /19"-13"
21” multi-scan mode /21"-13"
13" fixed mode /640x480
VGA/SVGA mode
16" fixed mode /832x624
19" fixed mode /1024x768
21" fixed mode /1152x870
ON
ON
ON
ON
ON
ON
ON
ON
ON ON
ON
ConnectingYour Computer to the Mouse Output Port
The built-in remote mouse receiver enables you to operate your
computer’s mouse functions from the remote control. It is a great
convenience for clicking through your computer-generated presenta-
tions.
ON
ON
ON
ON
ON
ON ON
ON ON
ON
ON
To connect the mouse output port:
1. Turn off your computer.
2. For PCs: Remove your current mouse and connect the supplied
serial cable from the mouse output to your PC’s mouse port. (Use
the 6-pin adapter for connecting to a PS/2 computer.)
For Macintosh: Remove your current mouse from your computer,
attach the Macintosh adapter to the mouse output port’s serial cable,
and connect the projector to your mouse port.
3. When the built-in remote mouse receiver is available, it will dis-
able your regular mouse, disconnect the serial cable and restart
your computer.
NOTE: For settings other than display modes supported by your
Macintosh and the projector, use of the DIP switch may bounce an
image slightly or may display nothing. If this happens, set the DIP
switch to the 13" fixed mode and then restart your Macintosh. After
that, restore to a displayable mode and then restart the Macintosh
again. Make sure that the projector and your Macintosh are con-
nected with the pin adapter and the supplied signal cable (mini D-
Sub 15-pin connector) and then restart your Macintosh.
Examples of DIP switch setting
MOUSE
OUTPUT
REMOTE
CONTROL
INPUT
PC CONTROL
17" multi-scan mode
VGA/SVGA mode
19" fixed mode
AUDIO MONITOR
OUTPUT
B OUTPUT
RGB INPUT
ON
ON
ON
IBM PC/AT
AUDIO
S-VIDEO
/
L
MONO
R
VIDEO
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
NOTE: Refer to your computer’s owner’s manual for more informa-
tion about your computer’s video output requirements and any spe-
cial identification or configuring your projector’s image and moni-
tor may require.
Serial cable (Supplied)
MOUSE
OUTPUT
REMOTE
CONTROL
INPUT
PC CONTROL
Macintosh
IBM PS2
AUDIO MONITOR
OUTPUT
B OUTPUT
RGB INPUT
ConnectingYour DVD Player
You can connect your projector to a DVD player with component
AUDIO
S-VIDEO
/
L
MONO
R
VIDEO
outputs or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output,
use the optional 15-pin-to-RCA x 3 cable to connect your DVD
player to the RGB INPUT connector on the projector.
For a DVD player without component video (Y,Cb,Cr) outputs,
use common RCA cables (not provided) to connect a composite
VIDEO output of the DVD player to the Video Input of the pro-
jector.
Serial cable (Supplied)
NOTE:Some computers or software programs may not work with the
MOUSE OUT port.
E–16
Download from Www.Somanuals.com. All Manuals Search And Download.
3.OPERATION
This section describes how to select a computer or video source, how
to adjust the picture, and how to customize the menu or projector
settings.
2. Press the ▲▼ buttons on the full function remote control or the
projector cabinet to highlight the menu for the item you want to
adjust or set.
3. Press the ᮣ button or the “Enter” button on the projector cabinet
or the “Left Click” button on the full function remote control to
select a submenu or item.
General Controls
Before you turn on your projector, ensure that the computer or video
source is turned on and that your lens cap is removed.
4. Adjust the level or turn the selected item on or off by using “Se-
lect” ᮤ or ᮣ buttons on the cabinet, or the “Mouse pad” on the
full function remote control. The on-screen slide bar will show
you the amount of increase or decrease.
1. Turn on the Projector
Plug the supplied power cable in the wall outlet. The projector
will go into its standby mode and the power indicator will glow
amber.
Only after you press the “On” button on the projector cabinet or
the full function remote control will the power indicator turn to
green and the projector become ready to use.
5. The change is stored until you adjust it again.
ENTER:
Stores the setting or adjustments.
CANCEL: Return to the previous screen without storing settings
or adjustments.
NOTE: To turn the projector on by plugging in the power cable,
use the menu and enable the “Auto Start” feature. (See page E-
23.)
NOTE:You can close the main and sub menus simultaneously by
pressing the Computer/Projector Select button to cancel the Pro-
jector mode.
2. Select the Computer, Video Source or PC Card Viewer
Press the Source button on the remote control or the projector
cabinet to select “Video” (VCR, document camera, or laser disc
player), S-Video”, “RGB” (computer or DVD with component
output) or “PC Card Viewer” to display the image.
Or press the “Menu” button on the remote control or the cabinet
and use the menu to select your video source: “Video”, “S-Video”,
“RGB”, or “PC Card Viewer”.
6. Repeat steps 2-5 to adjust an additional item, or press “Cancel”
on the projector cabinet or the remote control to quit the menu
display.
Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially
available USB mouse is required.
3. Adjust the Image Size and the Focus
Use the Zoom ring to adjust the image size, then use the Focus
ring knob to obtain the best focus.
Use the “Magnify” button (+) or (-) on the remote control to make
the image larger up to 400%.
NOTE:There may be some brands of USB mouse that the projector
does not support.
Operate the Menus using the USB mouse
4. Turning off the Projector
Mouse Cursor
First press the “off” button on the projector cabinet or the remote
control for a minimum of two seconds. The power indicator will
glow amber. Then, unplug the power cable. The power indicator
will go out.
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
IMPORTANT:
• The projector should be unplugged if it will not to be used for an
extended period.
• To turn off the image and sound briefly (five minutes or less),
use the “Picture Mute” button instead of turning the projector
off and on.
Menu Display
Clicking with a mouse button displays the main menu.
Clicking displays the pull-down menu.
To close the menu, click anywhere in the background.
Adjusting and Setting Display
• The projector will display a black, blue image or logo if no input
signal is present.
• Do not turn the projector off and then immediately back on. The
projector needs to cool for a minute before it can be restarted.
You can select a menu item and click with a mouse button to
make adjustments and setting.
Examples
Click (or press and hold) the mouse button ᮤ or ᮣ to adjust the
brightness.
Or click and drag the mouse button on the slide bar horizontally
to adjust it.
After the projector turns off, the cooling fans keep operating for a
full minute.
Do not disconnect the power cable during this time.
To save the adjustments, click . The display is closed.
If you click anywhere in the background while displaying adjust-
ment and setting menu or dialog box, you will get the main menu
at the clicking point.
Using the Menus
NOTE: The on-screen menu may not be displayed correctly while
interlaced motion video image is projected.
1. Press the “Menu” button on the remote control or projector cabi-
net to display the Main Menu.
NOTE: When using a USB mouse, click the mouse button to dis-
play the main menu. For other operations, do the same way as
you use your PC mouse.
E–17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU Tree
Main Menu
Sub Menu
Source Select
RGB
Items
Adjustable Sources
Main Menu
Source Select
Video
Brightness*
Contrast*
Color*
Hue*
Sharpness*
R, V, C
R, V, C
V, C
V, C
V
Adjustments
Image Options
Projector Options
Tools
S-Video
PC Card Viewer
Adjustments
Picture
Auto Adjust**
Position**
Pixel Adjust**
R
R
R
R
Help
Volume
R, V, C
Resolution**
Image
Color Temperature
Keystone
All
All
All Data/Current Signal
Aspect Ratio
Factory Default
V, C
Image Options
Image Mode
Gamma
Noise Reduction
Color Matrix
R, V, C
V, C
C
Video Mode
Language
Source Display
Projector Pointer
Projector Options
Menu
Orientation
Setup
Background
Signal Select
Auto Start
Power Management
Power Off Confirmation
Mouse Button
Mouse Sensitivity
Clear Lamp Hour Meter
Keystone Save
Tools
Capture
PC Card Files
ChalkBoard
Fan High Speed Mode
Remote Sensor
S-Video Mode Select
PC Card Viewer Options
Capture Options
Help
Contents
Source Name
Input Terminal
Frequency FH
Frequency FV
Sync Polarity
Signal Type
Video Type
Source Information
Projector Information
Sync Type
Interlace
Resolution
Aspect Ratio
Gamma
Noise Reduction
Color Matrix
Matrix Type
NOTE:
Adjustable sources R=RGB
V=Video/S-Video
C=Component
All=All sources (including PC Card Viewer)
Lamp Hour Meter
E–18
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Elements
Tab
Close button
Title bar
Setup
Page4
Page1 Page2 Page3
Signal Select
Orientation
Front Floor
Highlight
Auto
RGB
Auto
Auto
Video
S-Video
Solid triangle
Background
Blue
Cancel Button
OK Button
OK
Cancel
Setup
Page4
Page1 Page2 Page3
Check box
Mouse
Button
Auto Start
Power Management
Right Hand
Left Hand
Medium Slow
Sensitivity
Fast
Power Off Confirmation
Keystone Save
Radio button
Clear Lamp Hour Meter
Fan High Speed Mode
OK
Cancel
Slide bar
Brightness
Menu windows or dialog box typically have the following elements:
Title bar: Indicates the menu title.
X Close button: Click to close the window with saving changes. (USB mouse only)
Highlight:
Indicates the selected menu or item.
Solid triangle:
Tab:
Indicates further choices are available. A highlighted triangle indicates the item is active.
Indicates a group of features in a dialog box. Clicking on any tab brings its page to the front.
Use this round button to select an option in a dialog box.
Radio button:
Check box:
Slide bar:
Place a checkmark in the square box to turn the option On.
Indicates settings or the direction of adjustment.
OK button:
Cancel button:
Press to confirm your setting. You will return to the previous menu.
Press to cancel your setting. You will return to the previous menu.
E–19
Download from Www.Somanuals.com. All Manuals Search And Download.
Play/Stop: Plays back automatically or manually depending
on the setting on PC CardViewer Options of the menu.
This allows you to stopAuto Play while you are play-
ing back and to resume playing from the selected slide
or folder when “Auto Play” is selected. This allows
you to move on to the next slide when “Manual Play”
is selected.
Menu Descriptions & Functions
Source Select
Enables you to select a video source such
Source Select
RGB
as a VCR, DVD player, laser disc player,
computer or document camera depend-
ing on what is connected to your inputs.
Press the “Select” button on the projec-
tor cabinet or ▲▼ buttons on your re-
mote control to highlight the menu for
the item you want to adjust.
Video
S-Video
Jump: Displays a list of slides while you are playing back.
Select: Displays a list of folders while you are playing back.
PC Card Viewer
Delete: Deletes a captured slide(s) or all the captured slides
in the selected folder.
RGB
View: Hides the tool bar while you are playing back. Click-
ing with the right button of a mouse shows it again.
Selects the computer connected to your RGB or component signal.
NOTE: An optional component cable (Component V cable) is needed
for a component signal. Select “Component” from the Input Signal
submenu to display the component signal.
Adjustments
Adjustments
Picture
Provides access to controls for your im-
age and sound. Use the “Select” button
on the projector cabinet or ▲▼ buttons
on your remote control to highlight the
menu for the item you want to adjust.
Video
Volume
Selects what is connected to yourVideo input-VCR, laser disc player,
DVD player or document camera.
Image
Color Temperature
Keystone
S-Video
Selects what is connected to your S-Video input-VCR, DVD player,
or laser disc player.
Factory Default
NOTE: A frame may freeze for a brief period of time when a video is
played back in fast-forward or fast-rewind with a Video or S-Video
source.
Brightness
PC Card Viewer
This feature enables you to make presentations using a PC card that
contains captured images and slides created with the exclusive PC
Card Viewer Utility contained in the CD-ROM. See page E-27 for
installing the PC Card Viewer Utility. The starting screen for the PC
Card Viewer varies depending on the settings of the Setup's Page 3.
See Setup on page E-24.
Picture (not available for PC Card Viewer)
Brightness:
Contrast:
Color:
Adjusts the brightness level or the back raster inten-
sity.
Adjusts the intensity of the image according to the
incoming signal.
Increases or decreases the color saturation level (not
valid for RGB).
NOTE: Even if you switch the current PC Card Viewer source to
another source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
Hue:
Varies the color level from +/- green to +/-blue. The
red level is used as reference. This adjustment is only
valid for Video and Component inputs (Not RGB).
A launcher will appear when you press the MENU button.
Prev Play/Stop Select View
Sharpness:
Controls the detail of the image for Video (Not for
RGB and Component).
Drag
Volume (not available for PC Card Viewer)
Adjusts the sound level of the projector.
Next Jump Delete
The launcher is a tool bar including the following buttons:
Image
Drag: Drags to move the tool bar. (for USB mouse opera-
tion only)
Allows for adjustments of the image po-
sition and stability.
Image
Auto Adjust
Prev:
Next:
Returns to the previous slide or folder.
Advances to the next slide or folder.
Position
Pixel Adjust
Resolution
E–20
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Adjust:
When “Auto Adjust” is set to “On”, the projector automatically
Keystone
This feature corrects the keystone (trapezoidal) distortion to make
the top of the screen longer or shorter to be the same as the bottom.
Use the ᮤ or ᮣ buttons on the slide bar to correct the keystone
(trapezoidal) distortion.
determines the best resolution for the current RGB input signal
to project an image using NEC’s Advanced AccuBlend Intelli-
gent Pixel Blending Technology.
The image can be automatically adjusted for geometry and sta-
bility; “Horizontal Position”, “Vertical Position” and “Pixel Ad-
just.”
NOTE: The maximum keystone angle that can be corrected is 15
degrees upward and downward with the projector placed horizon-
tally. However, a picture will be blurred if you correct the keystone
angle beyond +12 degrees or more for SXGA signal on MT840.
On:
Automatically adjusts image “Horizontal Position”, “Ver-
tical Position” and “Pixel Adjust.”
Off:
User can adjust the image display functions (“Horizontal
Position”, “Vertical Position” and “PixelAdjust”) manu-
ally.
Factory Default
Factory Default
Restore to Factory Setting
Horizontal/Vertical Position (when Auto Adjust is off):
Adjusts the image location from left to right.
This adjustment is made automatically when the Auto Adjust is
turned on.
All Data
Current Signal
Restore
Pixel Adjust (when Auto Adjust is off):
Displays the Clock and Phase adjustments.
Changes all adjustments and setting to the factory preset for each
source individually except Lamp Usage Hours. (To reset the lamp
usage time, see “Clear Lamp Hour Meter” on page E-23.
Clock: Use this item with the “Auto Adjust on” to fine tune the
computer image or to remove any vertical banding that
might appear. This function adjusts the clock frequen-
cies that eliminate the horizontal banding in the image.
Press the ᮤ and ᮣ buttons until the banding disappears.
This adjustment may be necessary when you connect your
computer for the first time. This adjustment is made au-
tomatically when the Auto Adjust is turned on.
All Data:
Reset all the adjustments and settings for all
the signals to the factory preset.
Current Signal:
Resets the adjustments for the current signal to
the factory preset levels.
Image Options
Phase: Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the
ᮤ and ᮣ buttons to adjust the image.
Provides optional controls such as gamma
correction, component signal selection,
wide screen and video noise reduction
features.
Image Options
Image Mode
Video Mode
Use “Phase” only after the “Clock” is complete.
This adjustment is made automatically when the Auto
Adjust is turned on.
Image Mode
Image Mode
Aspect Ratio
Resolution (when Auto Adjust is off):
This allows you to activate or deactivate theAdvancedAccuBlend
feature.
Allows you to select the item you want to adjust.
Auto: Turns on the Advanced AccuBlend feature. The projec-
tor automatically reduces or enlarges the current image
to fit the full screen.
Native: Turns off the Advanced AccuBlend feature. The projec-
tor displays the current image in its true resolution.
NOTE: Aspect Ratio is not available for “PC Card Viewer”and “RGB”.
Aspect Ratio:
Aspect Ratio
Normal
Cinema
Zoom
Wide Zoom
NOTE: While you are displaying an image with higher resolu-
tion than the projector's native resolution, even when you are in
the Native mode, the image is displayed full screen using the
Advanced AccuBlend feature.
Allows you to choose the best screen size mode to fit on the screen.
Normal: Displays normal video picture with a 4-to-3 aspect
ratio as is.
Color Temperature
Zoom:
Displays DVD’s video picture with a 16-to-9 aspect
ratio expanded in the horizontal and vertical direc-
tion, maintaining the original proportion.
This feature adjusts the color temperature using the slide bar.
Move the slide bar to the right to increase the color temperature for a
bluish image; to the left to decrease it for a reddish image.
Wide Zoom:Displays DVD’s squeezed video picture with a 16-
to-9 aspect ratio expanded in the horizontal direction,
converted to 4-to-3 aspect ratio.
Color Temperature
Cinema: Displays DVD’s squeeze video picture with a 16-to-
9 aspect ratio compressed in the vertical direction,
maintaining the 16-to-9 aspect ratio.
E–21
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Mode
Projector Options
Enables you to set preferences and other
operating options.
Projector Options
Menu
Video Mode
Gamma
Setup
Noise Reduction
Color Matrix
Menu
Menu
Gamma:
Gamma
Normal
Language
Source Display
English
On
Off
Natural 1
Natural 2
Projector Pointer
Pointer 1
Use the ᮤ or ᮣ buttons to choose “Normal” when in a lighted
room and “Natural 1&2” when in a darkened room. “Natural 1”
for better flesh tone; “Natural 2” for true reproduction of middle
tones.
Pointer 1
Pointer 2
Pointer 3
Pointer 4
Pointer 5
Pointer 6
Pointer 7
Pointer 8
Each mode is recommended for :
Normal: Default for RGB signal (Factory preset)
Natural 1: Default for Video and S-Video signal
Natural 2: Default for component signal
Noise Reduction:
Allows you to set preferences for the on-screen menu.
Language:
Noise Reduction
You can choose one of seven languages for on-screen instruc-
tions. The options are: English, German, French, Italian, Span-
ish, Swedish and Japanese.
Off
Low
Medium
High
You can select one of the following three levels for reducing video
noise to your preference.
Projector Pointer:
This enables you to select from eight different Pointer icons for
the “Pointer” button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the
selected area on the screen.
NOTE: The lower the Noise Reduction level, the better the im-
age quality by way of higher video bandwidth.
Color Matrix
Color Matrix
Select Color Matrix
HDTV
NOTE: There may be cases where the Pointer function is not avail-
able for a non-interlace signal at 15kHz such as video game.
SDTV
Pb/Pr
Select Color Matrix
B-Y/R-Y
Cb/Cr
Source Display:
You can turn on and off the information for input name such as
VIDEO and RGB.
When this option is on, the current input will be displayed each
time you switch sources or turn on the projector.
First select an appropriate color matrix to fit your component
signal for HDTV or SDTV. Then select an appropriate matrix
type from B-Y/R-Y, Cb/Cr or Pb/Pr.
NOTE: The Color Matrix feature is available for component
video signal only.
E–22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
[Page2]
Enables you to set operating options.
Press “OK” to save your changes for all the features of Page1, Page2,
Page3 and Page4.
Setup
Page4
Page1 Page2 Page3
[Page1]
Mouse
Auto Start
Button
Setup
Right Hand
Left Hand
Power Management
Page4
Page1 Page2 Page3
Sensitivity
Power Off Confirmation
Keystone Save
Fast
Medium
Slow
Signal Select
Orientation
Front Floor
Auto
RGB
Clear Lamp Hour Meter
Fan High Speed Mode
Auto
Auto
Video
S-Video
Background
Blue
OK
Cancel
Auto Start:
Turns the projector on automatically when the power cable is
inserted into an active power outlet. This eliminates the need to
always use the “Power” button on the remote control or projector
cabinet.
OK
Cancel
Orientation:
This reorients your image for your type of projection.
Power Management:
The options are:front floor projection, rear ceiling projection, rear
floor projection, and front ceiling projection.
When this option is on and there is no RGB input for five min-
utes or more, the projector will automatically turn itself off.
Power Off Confirmation:
Background:
This option determines whether a confirmation dialog for turn-
ing off the projector will appear or not.
Use this feature to display a black, blue screen or logo when no
signal is available.
NOTE: When the confirmation message is displayed, you must be in the Pro-
jector mode to operate your projector using the remote control. If not, press
the Computer/Projector Select button to change your projector to the Projec-
tor mode. The button lights to indicate that you are in the Projector mode.
Transferring a logo from your PC
You can transfer your background logo from your PC to the projector.
To proceed as follows:
1) Install the PC Control Utility 1.0 on your PC from the supplied CD-
ROM. See page E-27 for installation.
2) Connect the PC CONTROL port of the projector with the serial
port of your PC with the supplied serial cable and then turn on the
projector.
Mouse Settings:
This option lets you to change your USB mouse settings. The
mouse settings feature is available for USB mouse only. Choose
the settings you want:
3) Start the PC Control Utility on your PC.
4) Click "Logo Transfer" button.
Mouse Button:
“Right Hand” or “Left Hand”
For more detailed information, see Readme.txt file included on the
supplied CD-ROM.
Mouse Sensitivity: “Fast”, “Medium” or “Slow”
Keystone Save:
NOTE: File size must be 64KB or less. JPEG and BMP images are
This option enables you to save your current keystone settings.
Saving your change once affects all sources. The changes are
saved when you turn off the projector.
available only.
Signal Select:
<RGB>
Fan High Speed Mode:
Allows you to choose "RGB" for an RGB source such as a com-
puter, or "Component" for a component video source such as a
DVD player. Normally select "Auto" and the projector automati-
cally detects a component signal. However there may be some
component signals that the projector is unable to detect. If this is
the case, select "Component".
This option allows you to select two modes for fan speed: high-
speed mode and normal speed mode.
When you wish to cool down the temperature inside the projec-
tor quickly, check this box. This is convenient especially when
the projector is installed on the ceiling.
Clear Lamp Hour Meter:
Resets the lamp clock back to zero. Pressing this button appears
the “Clear Lamp Usage ?” confirmation dialog box. To reset the
lamp usage hour, press “OK”.
<Video &S-Video System Select>
This feature enables you to select composite video standards
manually. Normally select "Auto".
When you select the video standard for Video and S-Video sepa-
rately, first select the radio button and then select the video stan-
dard from the pull-down menu.
NOTE: The projector will turn off and go into standby mode after 2100
hours (1600 hours for MT1045) of service. If this happens, press the
“Help” button on the remote control for ten seconds to reset the lamp
clock back to zero. Do this only after replacing the lamp.
This must be done for Video and S-Video respectively.
E–23
Download from Www.Somanuals.com. All Manuals Search And Download.
[Page 3]
PC Card Viewer Options
Start Mode
Setup
Sets the starting condition when PC Viewer input is selected on
the projector.
Page4
Page1 Page2 Page3
Show Folder List
S-Video Mode Select
Off
Remote Sensor
When PC Card input is selected on the projector, the folder lists
will be displayed and allows you to select the presentation from
the PC Card.
Auto Play
If this option is checked, any given slide will start to play auto-
matically. You can specify interval time between 5 and 300 sec-
onds.
NOTE: The Auto Play Interval time set on the PC Control Utility
overrides the one set here.
OK
Cancel
Manual Play
Remote Sensor
Views a slide manually when PC Card Viewer input is selected.
This option determines which remote sensors on the projector are
effective in wireless mode.
NOTE: The Auto Play and Manual Play options determine the
The options are: front, rear, right, or left. Checked sides show that
they can accept the infrared signal from the supplied remote control.
behavior of the Play/Stop [
/
] icon on the Viewer tool bar.
When selecting “Show Folder List” or “Manual Play” while the
“Auto Play” feature is not checked, and you select PC CardViewer
for the input source, you can manually advance to the next slide
or the previous slide.
S-Video Mode Select:
This feature is used to select the S-Video signal detection mode. This
allows identifying of the S-Video signals with different aspect ratio
(Zoom signal 16:9, Wide Zoom signal 4:3).
NOTE: If you check “Auto Play” and select “PC Card Viewer”
on the projector, the slides will automatically start to play back
from any given slide.
S1............. Identifies a Zoom signal only.
S2............. Identifies Zoom or Wide Zoom signal.
OFF ......... Does not identify any S-video signal.
Capture Options (available for JPEG only)
You have three options for JPEG compression quality: High qual-
ity, Normal and High Compression.
[Page 4]
Setup
Page3
Page1 Page2
Page4
High Quality
Gives quality of JPEG a priority.
PC Card Viewer Options
Start Mode
Auto Play
Manual Play
Normal
Show Folder List
Auto Play Interval
15
Gives normal JPEG quality.
sec
High Compression
Gives compression a priority.
Capture Options
High Quality
Normal
High Compression
Tools
Provides tools for capturing images, dis-
playing files in a PC Card and drawing.
OK
Cancel
Tools
Capture
NOTE: The “Tools” feature is required
for a PC card.
PC Card Files
ChalkBoard
Capture
Allows you to capture an image from a source that is currently being
displayed. The image is saved as JPEG in the PC card. When you
select Capture from the menu, you will get a tool bar. You can cap-
ture an image directly using the tool bar when the menu is not dis-
played.
E–24
Download from Www.Somanuals.com. All Manuals Search And Download.
The tool bar includes the following buttons:
ChalkBoard (available only when using with USB mouse)
Provides the tool bar for producing freehand drawings.
Freeze
Drag
Pen: Left-click and drag to draw. Right-click to display the
pen palette containing four lines of different thickness
from which you can select a line you prefer by left-
clicking.
Capture
Exit
Drag: Drags to move the tool bar. (for USB mouse operation
only)
Erase: Left-click and drag to erase part of a drawing. Right-
click to display the eraser palette containing four eraser
of different thickness from which you can select an
eraser you prefer by left-clicking.
Get: Captures an image and save it as a JPEG file in a PC
card.
Freeze: Freezes and unfreezes images.
Clear: Clears the drawing completely from the ChalkBoard
screen.
Exit: Exits the Capture function.
Unless a PC card is inserted into the PC Card Access slot of the pro-
jector, "No Card" is displayed. This means that the Capture feature is
not available.
Color: Selects a color. Left-click to display the color palette
from which you can select a color you prefer by left-
clicking.
The "Card Error" display means that the free space of the PC card is
insufficient for saving images. Make more space available on the card
by erasing unwanted images with your PC. The number of images
that can be captured depends on the size of the PC card.
View: Hides the tool bar by left-clicking. Right-clicking any-
where on the screen displays the ChalkBoard tool bar
again.
NOTE: Be sure not to turn off the power or remove the PC card
while capturing an image. Doing so could cause a loss of the data in
the PC card or damage to the card itself.
Exit: Clears the complete drawing and exits the ChalkBoard.
NOTE:
NOTE: Captured images with higher resolution than the projector's
* The ChalkBoard feature is available only when a USB mouse is used. Free-
hand drawings cannot be saved or captured.
* The main menu is not available while you display the ChalkBoard screen.
* The Capture and the Source Display function are not available on
ChalkBoard screen.
* Switching slides clears a drawing completely.
* Selecting BMP and JPEG files automatically switches to the PC Card
Viewer source.
native resolution cannot be displayed correctly.
PC Card Files
Displays a list of all the files stored in the PC card so that you can
select a file you want to display. You can also sort files by file name
or date, or display the file.
Although a list of all the files in the PC card is displayed, you can
view files in text, idx, HTML, JPEG and BMP format only.
PC Card Files
Help
Contents
File Name
@.
Size
Date
Execute
Exit
Help
Contents
<DIR> 1999/06/01 HH:MM
<DIR> 1999/06/01 HH:MM
Provides an online help about how to use
the menus. An undelined link means that
you can move to an adjustment item di-
rectly. Selecting the underlined link and
pressing ENTER moves to the corre-
sponding adjustment item.
@..
12345678.txt
12345678.bmp
12345678.htm
1234567890 1999/06/17 HH:MM
1234567890 1999/06/17 HH:MM
1234567890 1999/06/17 HH:MM
Source Information
Projector Information
Sort
Name (abc..)
File Group
All (*. *)
Free Space
Source Information
Displays the status of the current signal.
This dialog box has three pages.
Path
Info.
c : /
5 Files
Projector Information
Displays the lamp usage hours.
Selecting “Execute” displays the file you selected.
E–25
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the PC Card
• Hold the PC card horizontally and insert it slowly into card slot
Using the PC Card Viewer function
with its top facing up.
NOTE:
• The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted.
When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do
not play the software on CD player. Doing so could cause damage to
speakers.
NOTE: Do not try to force the PC card into the slot.
Features
The Viewer feature allows slides stored on a PC card to be displayed
on the projector. Even if no computer is available, presentations can
be conducted simply with the projector. This feature is convenient
for holding presentations at meetings and in offices, as well as for
playing images taken on digital cameras.
Easy to use
• Presentations can be started immediately simply by inserting a
PC card (not supplied)
• Easy slide switching
• Remote control operation
• Jumping to list of slides or any specific slide
Ejecting the PC Card
Press the eject button. The PC card pops out a little. Grasp the edges
of the PC card and pull it out. Do not eject the PC card while its data
is being accessed.
High quality images
• High resolution up to 1024
ן 768 dots(MT840: up to 800ן 600 Eject button
dots)
• 24-bit full color playback
• Viewing of digital camera images
Simpl utility software (for computer)
• PC Card Viewer software operable on Windows 95/NT
• Slides can be created by capturing the currently displayed im-
age
• Control screen for displaying lists of slides and editing
• Automatic slide conversion of files created with Microsoft
PowerPoint 95 and 97
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the
PC card slot in a specific direction. It cannot be inserted back-
wards or upside-down. Attempting to force it into the slot in the
wrong direction may break the internal pin and damage the card
slot. Refer to the PC card's operating instructions for the proper
direction of insertion.
* Microsoft, Windows and PowerPoint are registered trademarks
of Microsoft Corporation.
Inserting and Ejecting the PC Card
The PC card is used to view presentation data prepared on the com-
puter and to capture and play images projected with the projector.
PC Card Type
The PC Card Access slot accepts PCMCIA Type II.
E–26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the PC Card Viewer Software
Starting Up the PC Card Viewer Software on your PC
(PC Card Viewer Utility 1.0)
Before Installing
Perform the following before installing the PC CardViewer software:
• If Windows95 is already started, exit all applications. Installa-
tion may not be performed properly if any applications are run-
ning.
Use the PC Card Viewer Utility 1.0 for creating viewer slides.
To start the PC Card Viewer software:
* Select [Start]-[Programs]-[NEC PROJECTOR TOOLS]-[PC
Card Viewer Utility 1.0].
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the "Cancel" button
then follow the instructions in the dialog box.
1. Start up Windows95.
2. Insert the CD-ROM into the CD-ROM drive.
The auto CD play function automatically starts the CD-ROM's
program and the contents screen appears.
Refer to online help for instructions on using the PC Card Viewer
software.
* The auto CD play function operates if the "Auto insert notifica-
tion" box in the computer's CD-ROM control panel is checked.
(The box is checked by default.)
3. Click [Installing the PC Card Viewer Utility 1.0]
The setup dialog appears.
Contents of the English version PC Card Viewer software
(PC Card Viewer Utility 1.0)
This is the software used for creating PC Card Viewer slides. In
this manual it is referred to as the "PC Card Viewer software".
PC CARD VIEWER PPT CONVERTER 3.0
This is an application that converts files created with Microsoft
PowerPoint 95 or 97 into indexes so that they can be played di-
rectly with the PC Card Viewer Utility 1.0.
PC Card Viewer PPT Converter is installed automatically when
you install the PC Card Viewer Utility.
To start PC Card Viewer PPT Converter:
* Follow the instructions in the setup dialog to complete the in-
stallation.
* Select PC Card Viewer PPT Converter from NEC PROJECTOR
TOOLS.
For instructions on uninstalling the PC Card Viewer software, see
page E-31.
Basic Operation of the PC Card Viewer Software
PC Card Viewer Utility is an application for editing documents, con-
verting them into slides and storing them on PC cards as playback
data (indexes) for presentations using projectors.
E–27
Download from Www.Somanuals.com. All Manuals Search And Download.
Drag:
Prev:
Next:
Play:
Drags to move the tool bar. This is available for USB
mouse operation only.
Operating the PC Card Viewer Function from
the Projector (playback)
Returns to the previous slide or folder. Or this lets
you play slides back in reverse.
This section describes the operation for showing slides of presenta-
tion documents created using the PC Card Viewer function with the
projector.
It is also possible to make slides directly from the images projected
with the projector.
Advances to the next slide or folder. Or this lets you
play slides back.
Play/Stop: Plays back automatically or manually de-
pending on the setting on PC CardViewer Options of
the menu. This allows you to stop Auto Play while
you are playing back and to resume playing from the
selected slide or folder when “Auto Play” is selected.
This allows you to move on to the next slide when
“Manual Play” is selected.
Projecting slides
1. Insert a PC card into the card slot.
Insert the PC card with the side with the insertion direction arrow
on the top.
* Press the eject button to eject the card.
Jump: Displays a list of slides while you are playing back.
Select: Displays a list of folders while you are playing back.
2. Select the “PC Card Viewer” from the input menu.
1)Press the MENU button to display the main menu, use the ▲
and ▼ buttons to select the Source Select, then press the ᮣ but-
ton to display the source menu.
Delete: Deletes a captured slide(s) or all the captured slides
in the Capture – specific folder.
View: Hides the tool bar while you are playing back. Press-
ing the MENU button or clicking with the right but-
ton of a mouse shows it again.
2)Select the “Viewer” using the ▲ and ▼ buttons.
Source Select
RGB
Video
NOTE:
S-Video
* The tool bar for PC Card Viewer is not available if you display the
ChalkBoard and the Capture tools, and Main menu using the re-
mote control.
PC Card Viewer
When using a USB mouse you can display the ChalkBoard tool
bar, the Capture tool bar and Main menu as well as the PC Card
Viewer tool bar.
3. Projector slides.
* The tool bar is operated with buttons on the remote control, cabi-
net, and USB mouse.
If no memory card is inserted in the PC CARD ACCESS slot, there is
no signal, and a black, blue or logo background is displayed, de-
pending on the setting.
Checking “Show Folder List” means that selecting PC Card
Viewer input displays a list of the folders in the PC card and if
“Auto Play” is checked the projector automatically starts to play
slides at the first slide of the folder you have selected.
When selecting “Show Folder List” or “Manual Play” while
the “Auto Play” feature is not checked, and you select PC Card
Viewer for the input source, you can manually advance to the
next slide or the previous slide. See page E-24 for more details.
Playback is stopped when ᮤ or ᮣ on the remote control or the cabi-
net is pressed in Auto Play mode.
NOTE: Up to 12 indexes can be displayed on the list of folders. The
folder in the right bottom is always a folder exclusively for captured
images, but is only displayed when images have been captured. To
display the list of folders when there are 13 or more indexes stored on
the PC card, select "Edit index" from the PC Card Viewer software's
"File" menu and move the index you want to display to within 12
indexes from the top of the folder index. For details on indexes, refer
to the PC Card Viewer software's help folder.
A tool bar will appear when you press the MENU button on the re-
mote control or the projector cabinet or clicking with the right button
of a mouse.
NOTE:To use the tool bar, press the Computer/Projector Select but-
ton so that you can be in the Projector mode and the button can light
in red.
Prev Play/Stop Select View
Drag
Next Jump Delete
The tool bar includes the following buttons:
E–28
Download from Www.Somanuals.com. All Manuals Search And Download.
When the tool bar is not displayed:
Auto Play Mode
• If the “Auto Play” option is selected in “PC Card Viewer Op-
tions” of the menu, any given slide will start to play automati-
cally.You can also specifyAuto Play Interval between 5 and 300
seconds.
Multi cursor (blue marks)
Folder
Folder
Folder
Folder
Folder
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is possible to switch from a PC
CardViewer slide to the video picture then back to the PC Card Viewer
slide simply by using the Source button.
When the tool bar is not displayed, use the ᮤ or ᮣ button to advance
to the next folder or return to the previous folder.
NOTE: Even if you switch the current PC Card Viewer source to
another source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
Folder
POWER
OFF
ON
PJ
COMPUTER
SOURCE
S
PROJECTOR
AUTO ADJ.
A
Slide(Table) cursor (yellow marks)
NOTE: The PC card editing operation cannot be performed from the
projector. Do so using the PC Card Viewer software.
Slide
Slide
Slide
Slide
Slide
Slide
Slide
Slide
When the tool bar is not displayed, use the ᮤ or ᮣ button to advance
to the next slide or return to the previous slide.
Slide
NOTE: To use the ᮤ or ᮣ button to advance to the next slide or
folder, or return to the previous slide or folder, you must be in the
Projector mode.
To be in the Projector mode, press the Computer/Projector Select
button and the button lights in red.
E–29
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
Capturing Images Displayed on the Projector
• File size of the captured image varies depending on the resolution
of an input signal.
• Since an image data is compressed with the JPEG format, the im-
age is slightly degraded.
Storing images displayed on the projector on the PC
card
NOTE: An hourglass indicating that an image is being captured ap-
pears on the projector's display. Do not eject the PC card or turn off
the projector's power while this icon is displayed. Doing so will
damage the PC card data.
Preparations:
Insert the PC card into the card slot.
Insert the PC card with the side with the insertion direction ar-
row on the top.
If the PC card data is damaged, use a computer to repair the data.
* Press the eject button to eject the card.
NOTE: The folder in the right bottom is always a folder exclusively
for captured images. To display the list of folders when there are 13
or more indexes stored on the PC card, select "Edit index" from the
PC Card Viewer software's "File" menu and move the index you want
to display to within 12 indexes from the top of the folder index. For
details on indexes, refer to the PC Card Viewer software's help file.
1. Project the image you wish to store on the projector.
2. Select the “Capture” from the Tools menu.
Tools
Capture
PC Card Files
ChalkBoard
Freeze
Drag
Capture
Exit
3. A tool bar will appear.
The tool bar includes the following buttons:
Drag: Drags to move the tool bar (for USB mouse operation
only).
Capture:Captures an image and save it as a JPEG file in a PC
card.
Freeze: Freezes and unfreezes images.
Exit: Exits the Capture function. Another option to exit the
Capture function is to press MENU or CANCEL but-
ton on the remote control or projector cabinet.
* The tool bar for Capture is not available if you display the
ChalkBoard and the PC Card Viewer tools, and Main menu using
the remote control.
When using a USB mouse you can display the ChalkBoard and
the PC Card Viewer tools, and Main menu as well as the Capture
tool bar.
NOTE: You can compress a captured file (JPEG) using the Cap-
ture Options in the Setup dialog. See page E-24.
NOTE: Captured images with higher resolution than the
projector's native resolution cannot be displayed correctly.
E–30
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Captured Images
Uninstalling the PC Card Viewer Software
Prev Play/Stop Select View
Even if you do now know the PC Card Viewer software's file names
or where they are stored, the PC Card Viewer software files can be
easily removed from the system using the "Install/UninstallApplica-
tions" control panel in Windows 95. (Normally there is no need to
perform this operation.)
Drag
Next Jump Delete
Uninstalling the software
Using the Delete button on the tool bar for PC Card Viewer can de-
lete captured images.
To delete captured images:
Use the procedure described below to uninstall the PC Card Viewer
software files.
1) Select PC Card Viewer.
2) Use ᮣ button to select the Capture folder in the right bottom of
the screen.
1. From the "Start" menu, select "Settings" then "Control Panels".
3) Press the MENU button to display the tool bar.
4) Use the ᮤ or ᮣ button to select the Delete icon and press the
ENTER button or click with a mouse button.
Viewing Digital Images
Digital images can be played with the PC Card Viewer if the follow-
ing conditions are met:
• If the image can be stored on an MS-DOS format PC card
• If the image can be stored in a format supported by the PC Card
Viewer.
2. In the "Control Panels" dialog box, double-click on "Add/Remove
Programs".
With the PC CardViewer, images on the card are searched for in
directories and images in JPEG or BMP format are recognized
as slides.
Searchable directories are directories within two steps from the
root directory, and searchable images are images within the first
12 files in the directory. Only file and slide switching are pos-
sible.
3. In the "Add/Remove Programs Properties" dialog box, click the
"Setup/Remove" tab, then select "PC CardViewer Utility 1.0" from
the list of applications and click on "Add/Remove".
NOTE: The maximum number of images recognized as slides within
one directory is 128.
4. In the "Confirm File Deletion" dialog box, click "Yes".
5. Once the application is uninstalled, click on "OK" in the "Re-
move Program From Your Computer" dialog box.
E–31
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology
PC card
This is the name of a card currently being standardized by the Japan Electronic Industry Association (JEIDA) and
PCMCIA (Personal Computer Memory Card Interface Association) of the United States.
TYPE (I, II and III)
PCMCIA 2.1 PC cards are divided into three types according to their thickness: Type I (3.3 mm), Type II (5.0 mm)
and Type III (10.5 mm).
BMP
JPEG
A type of image format. The standard Windows Bit Map format used for MS-DOS/Windows-compatible comput-
ers.
A type of image format. "JPEG" is the abbreviation of Joint Photographic Experts Group. JPEG compression offers
efficient data storage. The data not required for displaying the image is identified and deleted. Since the data is
deleted, JPEG algorithms are said to be irreversible. This means that once the image is compressed, the decom-
pressed image it is not the same as the original image.
E–32
Download from Www.Somanuals.com. All Manuals Search And Download.
4. MAINTENANCE
This section describes the simple maintenance procedures you should
follow to replace the lamp, clean the filter, and replace the batteries
in the remote control.
3. Insert a new lamp housing until the lamp housing is plugged into
the socket.
CAUTION: Do not use a lamp other than the NEC replace-
ment lamp (MT40LP).
Order this from your NEC dealer.
Replacing the Lamp
After your lamp has been operating for 2000 hours (1500 hours :
MT1045) or longer, the “Status” light in the cabinet will go on and
the message will appear. Even though the lamp may still be working,
replace it at 2000 (1500 hours : MT1045) hours to maintain optimal
projector performance.
Secure it in place with the two screws.
Be sure to tighten the screws.
CAUTION
• DO NOT TOUCH THE LAMP immediately after it has been
used. It will be extremely hot. Turn the projector off, wait a
full minute, and then disconnect the power cable. Allow at
least one hour for the lamp to cool before handling.
• DO NOT REMOVE ANY SCREWS except the lamp cover
screw and three lamp case screws. You could receive an elec-
tric shock.
1
ADJUST
AUTO
U
N
E
M
L
E
C
SELECT
AN
C
OFF
/
R
E
N
T
E
ON
STATUS
POWER
M
SOURCE
SELECT
AN
C
R
E
N
T
E
STATUS
POWER
•
The projector will turn off and go into stand by mode after 2100
(1600 hours : MT1045) hours of service. If this happens, be sure
to replace the lamp. If you continue to use the lamp after 2000
hours (1500 hours : MT1045) of use, the lamp bulb may shatter,
and pieces of glass may be scattered in the lamp case. Do not
touch them as the pieces of glass may cause injury. If this hap-
pens, contact your NEC dealer for lamp replacement.
2
4. Reattach the lamp cover.
Tighten the lamp cover screw.
Be sure to tighten the screw.
To replace the lamp:
1. Loosen the lamp cover screw until the screwdriver goes into a free-
wheeling condition and remove the lamp cover. The lamp cover
screw is not removable.
U
N
E
M
SOURCE
L
E
C
SELECT
AN
C
OFF
/
ON
R
E
N
T
E
STATUS
POWER
ADJUST
U
N
E
AUTO
M
SOURCE
SELECT
U
N
E
M
R
SOURCE
E
N
T
E
L
E
C
SELECT
AN
C
OFF
/
R
E
N
T
E
STATU
PO
ON
STATUS
POWER
1
2
1
M
SOURCE
SELECT
AN
C
R
E
N
T
E
STATUS
POWER
2. Loosen the two screws securing the lamp housing until the screw-
driver goes into a freewheeling condition. The three screws are
not removable.
2
Remove the lamp housing by pulling out the handle.
5. After you install a new lamp, select [Main Menu] → [Projector
Options] → [Setup]→[Page 2]→[Clear Lamp Hour Meter] to re-
set the lamp usage hours.
NOTE: There is an interlock on this case to prevent the risk of
electrical shock. Do not attempt to circumvent this interlock.
U
N
E
M
SOURCE
L
E
C
SELECT
AN
C
NOTE: When the lamp exceeds 2100 hours (1600 hours : MT1045)
of service, the projector cannot turn on and the message is not dis-
played. If this happens, press the OFF or Help button on the remote
control for a minimum of 10 seconds while in standby mode. When
the lamp time clock is reset to zero, the STATUS indicator goes out.
OFF
/
ON
R
E
N
T
E
STATUS
POWER
1
2
ADJUST
AUTO
U
N
E
M
L
E
C
SELECT
AN
C
R
E
N
T
E
STATUS
POWER
Interlock
E–33
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Battery Installation
Cleaning or Replacing the Filters
1. Press firmly and slide the battery cover off.
The air-filter sponge keeps the inside of the MultiSync MT840/
MT1040/MT1045 Projector free from dust or dirt and should be
cleaned after every 100 hours of operation (more often in dusty con-
ditions). If the filter is dirty or clogged, your projector may overheat.
CAUTION
• Turn off the power and unplug the projector before re-
placing the filter.
• Only clean the outside of the filter cover with a vacuum
cleaner.
• Do not attempt to operate the projector without a filter
cover.
2. Remove both old batteries and install new ones (AA). Ensure that
you have the batteries' polarity (+/–) aligned correctly.
• Your projector will not operate unless the filter cover is
installed correctly.
To clean the air-filter:
Vacuum the filter-through the filter cover.
R C E
M
E
N
U
USB
A U T
A D J U S T
3. Slip the cover back over the batteries until it snaps into place.
To replace the air-filter:
1. Remove the filter cover by pushing up on the catch of the cover
until you feel it detach.
AC IN
2
1
L
T
S O U R C E
M
E
N
U
USB
A U T
A D J U S T
AC IN
1
2
2. Reinstall the new filter cover.
NOTE: Do not detach the sponge from the filter cover. Do not wash
the filter cover with soap and water. Soap and water will damage the
the filter membrane. Before replacing the filter cover, remove dust
and dirt from the projector cabinet. Keep out dust and during filter
replacement.
E–34
Download from Www.Somanuals.com. All Manuals Search And Download.
5. TROUBLESHOOTING
This section helps you resolve problems you may encounter while setting up or using the projector.
Status Light Messages
Condition
Status
OFF
• Normal
On continually
• The projector lamp has exceeded 2000 hours (1500 hours : MT1045) of operation and should be replaced.
Blinking very rapidly (On • The lamp cover or filter cover is not fastened properly. Check and reattach it if necessary.
and off in a cycle of 1 sec.)
Blinking very rapidly (On • The temperature protector has been triggerd. If the room temperature is high, move the projector to a
and off in a cycle of 4 sec.)
cooler location.
Blinking slowly (On and off • The cooling fan has stopped. Contact your NEC dealer for service.
in a cycle of 8 sec.)
Blinking very slowly (On • The lamp is not turned on.
and off in a cycle of 12 sec.)
The projector was turned off and back on too quickly. Turn off the projector, wait one minute, then turn the
projector back on. Or the lamp is burnt out.
Common Problems & Solutions
Problem
Check These Items
Does not turn on
• Check that the power cable is plugged in and that the power button on the projector cabinet or the remote
control is on.
• Ensure that the lamp cover is installed correctly. See page E-33.
• Check to see if the projector has overheated or the lamp usage exceeds 2100 hours (1600 hours : MT1045).
If there is insufficient ventilation around the projector or if the room where you’re presenting is particu-
larly warm, move the projector to a cooler location.
No picture
• Use the menu to select your source (Video, S-Video, RGB or PC Card Viewer). See page E-20.
• Ensure your cables are connected properly.
• Use menus to adjust the brightness and contrast. See page E-20
• Remove the lens cap.
• Reset the settings or adjustments to factory preset levels using the Factory Default in the Adjustment
Menu. See page E-21
Image isn’t square to the
screen
• Reposition the projector to improve its angle to the screen. See page E-12
• Use the Keystone in the Adjustment Menu to correct the trapezoid distortion. See page E-21
Picture is blurred
• Adjust the focus. See page E-12 or E-17.
• Reposition the projector to improve its angle to the screen. See page E-12
• Ensure that the distance between the projector and screen is within the adjustment range of the lens. See
page E-13
Image is scrolling verti-
cally, horizontally or both
• Use menus or Source button on the remote control or the cabinet to select the source you want to input.
Remote control does not
work
• Install new batteries. See page E-34.
• Make sure there are no obstacles between you and the projector.
• Stand within 22 feet (7 m) of the projector. See page E-34.
• Make sure that you are in the Projector mode or the Computer/Projector Select button lights in red.
If not, press the Computer/Projector Select button.
• See the Status Light messages above.
Status indicator is lit or
blinking
• If AutoAdjust is off, turn it on. If Auto Adjust is on, turn it off and balance the image with the Position and
Pixel Adjust in the Adjustments Menu. See page E-21.
Cross color in RGB mode
E–35
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the PC Card Viewer function
Condition
Status
No picture
• Is “PC Card Viewer” selected from the Source menu?
• Is the PC memory card seated in the PC CARD ACCESS slot completely?
• Are slide data stored in the PC card?
• Have the contents of the PC card been destroyed?
Part of a slide is not displayed • While an image with over 1024
ן 768 dots is projected, several lines of information will be lost. Use the supplied software change the image to 1024
ן 768 dots in size. Contents of PC Card are • Areas of slides exceeding 1024
ן 768 (MT840: 800ן 600 dots) cannot be displayed. Use the PC Card damaged
Viewer software, etc., to change the image size to 1024
ן 768 dots (MT840: 800ן 600 dots). In addition, the displayable image size differs according to the resolution of the projector. Use the PC Card
Viewer software, etc., to change the image size.
Note that on MT840 JPEG images exceeding 800
ן 600 dots are scaled down to three-quarters of its original size. Example: a JPEG image exceeding 1024
ן 768 dots is displayed in 768 (=1024ן 3/4)ן 576 (=768
ן 3/4) dots. • Use a computer, etc., to repair the data.
For more information contact your dealer.
E–36
Download from Www.Somanuals.com. All Manuals Search And Download.
6. SPECIFICATIONS
This section provides technical information about the MultiSync MT840/MT1040/MT1045 Projector’s performance.
Model Number
MT840E / MT1040E / MT1045E
Optical
LCD Panel
1.3” p-Si TFT active-matrix, 800
ן 600 dots (MT840) / 1024ן 768 dots (MT1040/MT1045) 1.3” p-Si TFT active-matrix with Micro Lens Array (MT1045)
Manual zoom, manual focus
Lens
MT840/MT1040 : F2.3 – 2.7 f=48.6 – 58.4 mm
MT1045 : F1.8 – 2.2 f=49.3 – 59.3 mm
Lamp
MT840/MT1040 : 180W NSH lamp / MT1045 : 200W NSH lamp
30 – 300 inches (762 – 7620 mm) diagonal
Image Size
Projection Distance
MT840/MT1040 : 4.3 – 36.7 ft (1.3 - 11.2 m)
MT1045 : 4.3 – 37.1 ft (1.3 - 11.3 m)
Electrical
Inputs
Video (NTSC / PAL / PAL60 / SECAM / NTSC4.43)
Horizontal Frequency : 15 – 85 kHz (RGB : 24 kHz or over)
Vertical Frequency : 50 – 85 Hz
Video Bandwidth
Color
RGB: 80 MHz
Reproduction Full color, 16.7 million colors simultaneously.
550 TV lines : NTSC / PAL / NTSC4.43 / YCbCr
350 TV lines : SECAM
Horizontal Resolution
RGB MT840 :800 dots horizontal, 600 dots vertical
MT1040/MT1045 : 1024 dots horizontal, 768 dots vertical
100 – 120 / 200 – 240 VAC, 50 / 60 Hz
Power Requirement
Input Current
3.5 A (100 – 120 VAC) / 1.7A (200 – 240 VAC)
Mechanical
Dimensions
MT840/MT1040 : 11.1" (W)
ן 4.8" (H)ן 14.3" (D) / 281mm (W)ן 121mm (H)ן 364mm (D) (not including lens and feet) MT1045 : 11.1" (W)
ן 4.8" (H)ן 14.9" (D) / 281mm (W)ן 121mm (H)ן 376mm (D) (not including lens and feet) MT840/MT1040 : 12.4 lbs / 5.6 kg
Net Weight
MT1045 : 12.8 lbs / 5.8 kg
Environmental Considerations Operational Temperatures: 32˚ – 104˚F (0˚ to 40˚C), 20 – 80% humidity
Storage Temperatures: 14˚ – 140˚F (-10˚ to 60˚C), 30 – 85% humidity
Regulations
UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
Meets FCC Class A requirements
Meets AS/NZS3548
Meets EMC Directive (EN55022, EN55082-1, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
The specifications are subject to change without notice.
E–37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cabinet Dimensions
MT840/MT1040
1.5 (0.06")
281 (11.06")
P O W E R
S T A T U S
O / F F O N
S E L E C T
A D J U A S U T T O
S O U R C E
Lens center
39.5
(1.56")
Lens center
AC IN
Unit = mm (inch)
E–38
Download from Www.Somanuals.com. All Manuals Search And Download.
MT1045
1.5(0.06")
281(11.06")
P O W E R
S T A T U S
O / F F O N
S E L E C T
A D J U A S U T T O
S O U R C E
Lens center
39.5
(1.56")
Lens center
AC IN
Unit = mm (inch)
E–39
Download from Www.Somanuals.com. All Manuals Search And Download.
D-Sub Pin Assignments
Mini D-Sub 15 Pin Connector
Signal Level
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
5
4
3
2
1
10
9
8
7
6
15 14 13 12 11
Pin No.
RGB Signal (Analog)
YCbCr Signal
1
2
Red
Cr
Y
Green or Sync on Green
Blue
3
Cb
4
Ground
5
Ground
6
Red Ground
Cr Ground
Y Ground
Cb Ground
7
Green Ground
Blue Ground
8
9
No Connection
Sync Signal Ground
Ground
10
11
12
13
14
15
Bi-directional DATA (SDA)
Horizontal Sync or Composite Sync
Vertical Sync
Data Clock
E–40
Download from Www.Somanuals.com. All Manuals Search And Download.
Timing Chart
Resolution
( Dots )
Refresh Rate
( Hz )
Frequency H. Dot Clock
Y / N
Signal
( kHz )
( MHz )
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
#Y
#Y
#Y
#Y
#Y
#Y
#Y
#Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
##Y
NTSC
PAL
SECAM
VESA
MAC
IBM
VESA
VESA
IBM
MAC
MAC
MAC
VESA
VESA
IBM
640
ן 480 768
ן 576 768
ן 576 640
ן 350 640
ן 400 640
ן 400 640
ן 400 640
ן 480 640
ן 480 640
ן 480 640
ן 480 640
ן 480 640
ן 480 640
ן 480 640
ן 480 640
ן 480 720
ן 350 720
ן 400 720
ן 350 720
ן 400 800
ן 600 800
ן 600 800
ן 600 800
ן 600 800
ן 600 832
ן 624 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1024
ן 768 1152
ן 864 1152
ן 870 1152
ן 900 1152
ן 900 1280
ן 960 1280
ן 1024 1280
ן 1024 1280
ן 1024 1280
ן 1024 1280
ן 1024 1280
ן 1024 1280
ן 1024 1280
ן 1024 60
50
50
85.08
66
15.734
15.625
15.625
37.86
35
31.47
37.86
31.47
31.47
31.47
34.97
35
-
-
-
31.5
30.24
25.175
31.5
25.175
25.175
25.175
31.334
30.24
31.5
31.5
31.49
36
70
85.08
59.94
60
60
66.67
66.67
72.81
75
37.86
37.5
75
39.375
43.269
31.469
37.927
39.44
39.375
35.16
37.879
48.077
46.88
53.674
49.725
35.5
48.363
57.476
58.131
60.241
60.023
68.677
67.5
VESA
IBM
VESA
IBM
85.01
70.09
85.04
87.85
87.7
56.25
60.32
72.19
75
85.06
74.55
43 Interlaced
60
28.322
35.5
35.5
35.5
36
IBM
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
IBM
MAC
VESA
VESA
VESA
MAC
SUN
SGI
VESA
SGI
VESA
MAC
MAC
HP
40
50
49.5
56.25
57.283
44.9
65
75
79
80
70.07
72.03
74.93
75.03
85
78.75
94.5
108
75
75.06
65.95
76.05
60
68.681
61.796
71.736
60
100
92.94
105.6
108
107.35
108
107
118.5
135
60
63.9
60.02
60.38
65.2
72.01
76.11
75.03
85.02
63.981
64.31
69.9
78.125
81.13
79.976
91.146
SUN
VESA
VESA
135
135
157.5
#Y: Images in above flagged with # and Y are compressed with Advanced AccuBlend on MT840.
##Y: Images in above flagged with ## andY are compressed with Advanced AccuBlend on MT1040 / MT1045.
NOTE: Some composite sync signals may not be displayed correctly.
E–41
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Control Codes
Cable Connection
Communication Protocol
Baud rate:
38400 bps
8 bits
Function
Code Data
Data length:
Parity:
POWER ON
02H 00H 00H 00H 00H 02H
02H 01H 00H 00H 00H 03H
02H 03H 00H 00H 02H 01H 01H 09H
02H 03H 00H 00H 02H 01H 06H 0EH
02H 03H 00H 00H 02H 01H 0BH 13H
02H 03H 00H 00H 02H 01H 1FH 27H
02H 10H 00H 00H 00H 12H
02H 11H 00H 00H 00H 13H
02H 12H 00H 00H 00H 14H
02H 13H 00H 00H 00H 15H
02H 14H 00H 00H 00H 16H
02H 15H 00H 00H 00H 17H
No parity
One bit
None
Stop bit:
X on/off:
POWER OFF
INPUT SELECT RGB
INPUT SELECT VIDEO
INPUT SELECT S-VIDEO
INPUT SELECT PC CARD VIEWER
PICTURE MUTE ON
PICTURE MUTE OFF
SOUND MUTE ON
SOUND MUTE OFF
ON SCREEN MUTE ON
ON SCREEN MUTE OFF
Full duplex
Communications
procedure:
PC Control Connector (DIN-8P)
To RxD of PC
ᮣ
8
6
7
5
4
3
2
1
To GND of PC
To TxD of PC
ᮣ
ᮤ
NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector.
NOTE: Contact your local dealer for a full list of the PC Control
Codes if needed.
E–42
Download from Www.Somanuals.com. All Manuals Search And Download.
|