Operating instructions
for Washing machine
W 5964 WPS
en - GB
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 09 312 510
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Optional programme packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preparing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Calibrating the load sensor to zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Steam smoothing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Stains 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Extra quiet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Further extras 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Water plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Extra rinse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Pre-wash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Rinse hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The following extra options can be selected in addition to the programme:. . . . . 29
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To omit the final spin (Rinse hold) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To omit rinse and interim spin and the final spin (No spin) . . . . . . . . . . . . . . . 30
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 41
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Water softeners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Washing with several components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adding fabric conditioner or starch separately . . . . . . . . . . . . . . . . . . . . . . . . 45
Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the drum (Hygiene info) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
External casing and fascia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
One of the following fault messages appears in the display. . . . . . . . . . . . . . . . . 50
The following fault messages appear in the display at the end of the programme . . 51
Problems with the load size indicator or calibrating to zero . . . . . . . . . . . . . . . . . 52
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
The door will not open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Opening the drum door in the event of a blocked drain outlet
and/or power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Optional spare parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Transporting the washing machine to its installation site . . . . . . . . . . . . . . . . . 61
Removing the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 65
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Notes for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
To open the Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
To select a setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
To close the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Longer pre-wash Cottons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CareCollection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine conforms to current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the washing
machine, please read these instructions carefully before using it
for the first time. They contain important information on its
installation, safety, use and maintenance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future owner.
Correct application
This washing machine is not designed for commercial use. It is
~
intended for use in domestic households and in similar working and
residential environments.
The washing machine is not intended for outdoor use.
~
It must only be used as a domestic appliance to wash items
~
which are specified by the manufacturer as being washable on the
care label.
Any other usage is not supported by the manufacturer and could be
dangerous. Miele cannot be held liable for damage resulting from
incorrect or improper use or operation of the washing machine.
The washing machine can only be used by people with reduced
~
physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised whilst using it or have been shown
how to use it in a safe way and understand the hazards involved.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safety with children
Children 8 years and older may use, clean or maintain the
~
washing machine without supervision only if they have been shown
how to do so in a safe way and understand the hazards involved.
Children under 8 years of age must be kept away from the
~
machine unless they are constantly supervised.
The washing machine is not a toy! To prevent the risk of injury, do
~
not allow children to play with it or near it, or to play with the
controls.
For machines with a 'porthole' door, remember that the porthole
~
glass will be hot when washing at high temperatures
Do not let children touch it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Before setting up the washing machine, check it for any externally
~
visible damage.
Do not install or use a damaged washing machine.
Before connecting the washing machine, ensure that the
~
connection data on the data plate (voltage and frequency) match
the mains electricity supply. If in any doubt, consult a qualified
electrician.
The electrical safety of this washing machine can only be
~
guaranteed when correctly earthed. It is most important that this
basic safety requirement is observed and regularly tested, and
where there is any doubt the household wiring system should be
inspected by a qualified electrician. The manufacturer cannot be
held liable for the consequences of an inadequate earthing system
(e.g. electric shock).
Do not connect the washing machine to the mains electricity
~
supply by an extension lead. Extension leads do not guarantee the
required safety of the machine (e.g. danger of overheating).
Faulty components must only be replaced by genuine Miele
~
original spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Unauthorised repairs could result in unforeseen dangers for the
~
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician.
If the connection cable is faulty it must only be replaced by a
~
Miele approved service technician to protect the user from danger.
The machine must be isolated from the electricity supply in the
~
event of a fault and during installation, maintenance and repair work.
The Miele "Water protection system" protects from water damage
~
provided the following conditions have been met:
– the machine is correctly plumbed in and connected to the
electricity supply.
– if a fault has been identified, the machine must be examined by a
competent person before further use, and repaired if necessary.
In areas which may be subject to infestation by cockroaches or
~
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
This machine must not be used in a non-stationary location (e.g.
~
on a ship).
Do not make any alterations to the washing machine, unless
~
authorised to do so by Miele.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Do not install your washing machine in rooms where temperatures
~
below freezing may occur. Frozen hoses may burst or split. The
reliability of the electronic control unit may be impaired at
temperatures below freezing point.
Before using the washing machine for the first time, check that
~
the transit bars at the rear of the machine have been removed (see
section on "Installation and connection"). During spinning, a transit
bar which is still in place may result in damage to both the machine
and adjacent furniture or appliances.
Turn off the stopcock if the machine is to be left for any length of
~
time (e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
Flooding danger.
~
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins,
~
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds
container, drum), which in turn can result in damage to the laundry.
Take care when opening the drum door after using the steam
~
function. Danger of burning due to escaping steam and the high
temperature of the surface of the drum as well as the porthole glass.
Stand back away from the machine and wait until the steam has
dissipated.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
If the correct amount of detergent is dispensed, the machine
~
should not need to be descaled. If, however, you do wish to descale
the machine only use proprietary non-corrosive descaling agents
and strictly observe the instructions on the packaging. A special
descaling agent is available to order from the Miele Spare Parts
Textiles which have been pre-treated in solvent based cleaning
~
agents must be thoroughly rinsed in clean water before being
washed in the machine.
Do not use solvent based cleaning agents, e.g. those containing
~
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and
explosion hazard.
Do not use solvent based cleaning agents, e.g. those containing
~
benzine, to clean the outside surfaces of this machine. They can
cause damage to plastic surfaces.
Only use dyes specified by the manufacturer as being suitable for
~
use in a domestic washing machine. Always observe the
manufacturer's instructions carefully.
Colour run and dye removers contain sulphur compounds which
~
can cause damage such as corrosion. Do not use these products in
this machine.
If detergent comes into contact with the eyes, rinse them
~
thoroughly with lukewarm water immediately. If swallowed, seek
medical assistance immediately and retain the packaging or label
for reference. Those with skin problems or sensitive skin should
avoid their skin coming into contact with detergent.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Accessories
Accessory parts may only be fitted when expressly approved by
~
Miele. If other parts are used, guarantee, performance and product
liability claims will be invalidated.
Miele cannot be held liable for damage caused by
non-compliance with these Warning and Safety instructions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
aStart/Stop button
fExtra option buttons with indicator
lights
For starting the programme selected
and cancelling a programme once it
has started.
Various extra options can be added
to the washing programmes.
bDisplay with X, OK and Y buttons
See the following page for more
information.
gProgramme selector
For selecting a programme. The
programme selector can be turned
clockwise or anti-clockwise.
c+ button
For selecting delay start.
hK button
For switching the washing machine
dPC/Optical interface
on and off.
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
To save energy, the washing
machine will switch itself off
automatically 15 minutes after the
end of the programme/anti-crease
phase or after being switched on if
no other selection is made.
eLoad/Detergent button
For calling up the load size or the
recommended amount of detergent,
and for calibrating the load size
sensor to zero.
iDoor button
Opens the machine door.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Display
Multiple option selection
If a value is selected there will be a tick
9 next to it.
Further extras
9
8
Water plus
Extra rinse
;
,
Press the X or Y button to scroll down
or up the options in the display. Press
the OK button to select the highlighted
value. You can now select the next
value, if you wish.
The display is operated using the X,
Single option selection
OK and Y buttons.
Here one of the values is always
– Press the X button
selected. A tick ( will appear next to
the one currently selected. The other
values are deselected automatically.
to move down to the next text or to
decrease the value highlighted in the
display.
Gentle action
– Press the Y button
to move up to the next text or to
increase the value highlighted in the
display.
Off (
;
,
On
Press the X or Y button to scroll down
or up the options in the display. Press
the OK button to select the highlighted
value.
– Press the OK button
to confirm the value highlighted in
the display.
Programme selection examples
To decrease or increase a value
Cottons
To come out of a sub-menu
Select Back # to come out of the
sub-menu or wait for approx. 15
seconds and the display will return to
the programme menu automatically.
40°C N N N N E E E EM
1600 rpm
2:59 h
Duration:
Press the X button to decrease the
temperature and the Y button to
increase the temperature.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
The following are selected via the
display
Optional programme packages
Additional programme packages
(containing a number of individual
programmes) are available for
downloading into your machine.
– wash temperature
– final spin speed
– the soak time
These have to be downloaded by a
Miele service engineer.
– delay start
– cancellation of a programme
– safety lock
The following programme packages
can be downloaded into your machine
if they were not supplied with your
machine ex-works (depending on
model):
The following are selected via
Further programmes/Settings 4
– Nursery
– Eco
– Steam care
– Sportswear
– Trainers
– Home XL
– Hygiene & kids
– Medic
– Outerwear
– Proofing
– Soft toys
– First wash
– Silks /
– Pillows
– The new programmes can then be
selected by turning the programme
selector to Further programmes/
Settings 4.
– Curtains
– Separate rinse
– Starch
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Preparing the washing
machine
2. Set the language
You will be asked to select the
language you require for the display. It
is possible to select another language
at any time via Further programmes/
Settings 4 in the Settings sub-menu.
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
Sprache
deutsch
english
;
,
^ Press the X and Y buttons to scroll
through the options until the
language that you want is
This washing machine has
undergone a complete functional test
at the factory and there will be some
residual water in the drum from this
process.
highlighted. Press the OK button to
confirm your selection.
Preparing the washing machine for use 3. Set the time of day
is done in six stages. The washing
The display for setting the time will then
machine guides you automatically
appear.
through steps 1. to 5.
Time
1. Welcome screen
^ Press the K button.
12:00
The welcome screen will appear in the
display for 3 seconds. The display for
setting the language will then appear.
^ Press the X button to decrease or the
Y button to increase the hour.
^ Confirm the hour selected with the
OK button. Then do the same to set
the minutes.
The welcome screen will appear in
the display every time the washing
machine is switched on until a
programme lasting longer than
1 hour has been completed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
4. Reminder to remove transit bars
6. Run your first programme
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
amount of detergent required which
appears as a recommendation in the
display. To enable the load size sensor
to function correctly, you must first run
a Cottons 60°C programme without any
laundry and without detergent.
^ After removing the transit bars (if this
has not already been done by your
fitter) press the OK button.
^ Open the stopcock.
5. Continue preparing the washing
machine for use as described in the
Operating instruction manual
^ Turn the programme selector to
Cottons.
Cottons
An initial wash programme now has to
be carried out in order to complete the
preparation process.
60°C
1600 rpm
2:59 h
Duration:
^ Confirm the message by pressing the
OK button.
^ Press the Start/Stop button.
Your machine is now ready for the first
programme to be run.
^ At the end of the programme switch
the machine off.
The washing machine is now ready for
use.
15:00
Select programme
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Calibrating the load sensor to zero
After running the first programme, the
load sensor has to be calibrated to
zero as you would with bathroom
scales.
^ Switch on the machine.
^ Open the drum door.
^ Turn the programme selector to
Cottons.
^ Press and hold the Load/Detergent
button pressed in until the following
message appears in the display:
Zero setting OK
:
^ Switch off the washing machine.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent for
smaller loads. Use the Load/
Detergent button.
– When smaller amounts of laundry are
washed, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
Choosing the correct Extra option
(Short, Soak, Pre-wash)
Select:
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– Use the Express 20 programme for
small loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g
20°C). Washing using lower
temperature settings will save
energy.
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
– A wash programme together with the
Soak extra option for very heavily
soiled laundry.
– To maintain the hygiene of the
washing machine, carry out a hot
wash (60°C or above) using powder
detergent at regular intervals. The
Hygiene Info message will appear in
the display to remind you to carry out
a hot wash.
– The Pre-wash extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
,If you use a solvent-based
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
cleaning agent (e.g. one containing
benzene) to pre-treat a stain, make
sure that any plastic parts (e.g.
buttons) are protected, and that the
cleaning agent is rinsed off before
washing the garment in the machine.
ASort the laundry
,Do not use solvent-based
cleaning agents in or on this machine.
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
^ Empty all pockets.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Curtains: Remove lead weights first
or place in a laundry bag.
components in the machine.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
^ Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
Do not wash any items in this machine
which are specified by the
manufacturer as not washable on the
care label. (h symbol)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
Via the programme selector at the
Further programmes/Settings4
position
The interior drum lighting will come on.
The drum lighting will go out
automatically after five minutes. Press
the Door button to switch the drum
lighting back on again.
All the programme buttons will come
on, and the display will ask you to
select a programme.
CSelect a programme
Via the programme selector:
^ When you turn the programme
selector to Further programmes/
Settings 4 , these will appear in the
display.
Further programmes
Settings !
;
,
Steam care
^ Press the X or Y button to scroll
through the options until the
programme you want is highlighted
and confirm your selection by
pressing the OK button.
^ Turn the programme selector to the
required programme.
The programme selected will appear in
the display.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
DSelect a temperature / spin speed
ESelect an extra option(s)
If required, you can change the
suggested temperature and/or spin
speed within a given range.
Cottons
60°C
1600 rpm
2:59 h
Duration:
^ Press the X or Y button to alter the
temperature.
^ By pressing the OK button you
switch to changing the spin speed
and back again.
^ Select any extra options by pressing
the appropriate button. The relevant
indicator light will come on to show
which extra option has been
selected.
Cottons
60°C
1600 rpm
2:59 h
Duration:
^ Press the Further extras 4 button to
select the following extra options
(depending on the programme
selected): Water plus, Extra rinse,
Pre-wash, Soak and Rinse hold.
^ Press the X or Y button to alter the
spin speed.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the programme
being used.
See "Extra options" for more
information.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FLoad the drum
Make sure that no items are caught
between the drum door and seal.
^ Press the Door button to open the
drum door.
The load size indicator display will
appear.
Load
8
< 25%
The display shows the amount of
laundry loaded in the drum as a % (in
25% steps) of the maximum load
permissible for the programme
selected.
^ Shut the door with a gentle swing.
^ Unfold the laundry and load loosely
into the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this causes creases and reduces
cleaning efficiency.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
GAdd detergent
It is important to dispense the correct
amount, because
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
Detergent
– Greasy particles clinging to laundry.
7
100%
– Limescale deposits on the heater
elements.
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
40% = Add slightly less than half
the amount recommended
50% = Add half the amount
– High water consumption (an
additional rinse cycle will
automatically switch in).
recommended
60% = Add slightly more than half
the amount recommended
– A burden to the environment.
75% = Add three quarters of
the amount recommended
100% = Add the full amount of
detergent recommended
You also need to take the level of
soiling and water hardness into
account.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
HSelect Delay start (if required)
^ Press the + button and set the time
you wish the programme to end at.
See "Delay start" for more information.
IStart the programme
^ Press the flashing Start/Stop button.
If a delay start time has been set, then
this will count down in the display. At
the end of the delay start time or imme-
diately after the programme has started
(if no delay start time has been
selected) the estimated programme
duration will appear in the display.
During the first 8 minutes the machine
measures how much water is being
absorbed by the laundry. The
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
i
Detergent for the pre-wash (divide
the total recommended amount as
follows: add 1/3 to compartment i
and 2/3 to compartment j)
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washing
machine lets you know which section of
the programme has been reached.
j
Detergent for the main wash,
including Soak if selected
The drum lighting switches off once the
programme has started.
§
Fabric conditioner or liquid starch
^ Close the detergent drawer.
See "Detergent" for further information.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
JProgramme end - unload the drum
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
discoloured themselves.
Cottons
60°C
1600 rpm
Anti-crease
and
Programme finished
Unload the drum
before switching off
:
,Caution. After using the steam
function, there is danger of burning
due to escaping steam and the high
temperature of the surface of the
drum as well as the porthole glass.
Stand back away from the machine
and wait until the steam has
^ Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Important
dissipated.
Always remove the laundry before
switching the machine off. This is
important to ensure that the load size
indicator works correctly.
^ Press the Door button to open the
drum door.
The machine will switch off
^ Turn the programme selector to the
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the K button to switch
it back on again.
Stop position.
^ Switch the machine off with the K
button.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^ Remove the laundry.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
Extra options are selected or
deselected by pressing the appropriate
button.
Extra quiet
If using your washing machine during
quiet periods, you can reduce the noise
levels even more.
Steam smoothing
If the Extra quiet extra option is
At the end of the programme, the
laundry is dampened with steam in
order to reduce creasing. The
maximum load is 2.0 kg, as smaller
loads give a better result.
selected, the machine will activate the
Rinse hold extra option and not spin.
The programme duration is longer.
To deactivate Rinse hold
Further extras
Stains 4
9
Rinse hold
;
There is a choice of various types of
stains for achieving the optimum wash
result with stain removal. Extra options
will be added to the wash programme
automatically, depending on the type of
stain selected. With some stains, a tip
about pre-treating the stain will appear
in the display. You can select a
Back #
,
^ Press the X or Y button until Rinse
hold is highlighted and deactivate it
with the OK button.
The following will appear in the display:
maximum of three stains with each
wash programme.
Delay start can be
used to delay the
spin
:
If the "Short" extra option was selected
previously, it will be deselected
automatically.
By using Delay start you can make
sure the final spin occurs outside
quiet periods in the home.
Press the Stains 4 button again to
come out of the Stains sub-menu.
Short
For light to normal soiling with no visible
staining.
The duration of the main wash is
reduced.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
Further extras 4
You can now use the display to select
the soak duration you require.
The Further extras sub-menu will open
in the display.
Soak duration
0:30 h:min
Press the Further extras 4 button
again to come out of the Further
extras sub-menu.
(0:00 - 6:00 h)
^ Use the X or Y button to select the
soak duration you want and confirm it
with the OK button.
Water plus
The water level in the main wash and
the rinses will be increased.
– To delete the soak duration
^ Press the Further extras 4 button.
Extra rinse
Further extras
An additional rinse cycle is carried out
to achieve a better rinse result.
9
8
Soak
;
Pre-wash
Rinse hold
,
For laundry with large amounts of dirt
e.g. dust, sand.
^ Press the X or Y button until Soak is
highlighted and deselect it with the
OK button.
Soak
Rinse hold
For heavily soiled items with protein
stains.
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
A duration of between 30 minutes and 6
hours can be chosen in 30 minute
increments for the soak process.
– To select the soak duration
Further extras
8
8
Soak
;
Rinse hold
,
^ Press the X or Y button until Soak is
highlighted and confirm it with the
OK button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
The following extra options can be selected in addition to the
programme:
Cottons
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Minimum iron
Delicates
Woollens /
Hygiene
#
#
#
#
#
#
#
#
#
#
#
1)
Express 20
Automatic plus
Shirts
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Denim
Dark garments
Sportswear
Trainers
#
#
#
#
#
2)
#
Outerwear
Proofing
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Soft toys
First wash
Silks /
#
#
#
#
#
#
#
#
#
#
Pillows
#
#
2)
Curtains
#
Separate rinse
Starch
1)
This extra option is activated automatically but can be deselected
This extra option is activated automatically and cannot be deselected
2)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. In some
Programme
Cottons
rpm
1600
1200
600
Minimum iron
Delicates
programmes, an additional rinse is
introduced if a spin speed of less than
700 rpm is selected.
Woollens /
Hygiene
1200
1600
1600
–
Express 20
Freshen up
Automatic plus
Shirts
To omit the final spin (Rinse hold)
^ Press the Further extras 4 button
and select the Rinse hold option.
1200
600
– To start the final spin and end the
programme:
Denim
900
Dark garments
Drain / Spin
Steam care
Sportswear
Trainers
1200
1600
–
The washing machine will display the
maximum spin speed possible. You
can use the X button to select a
lower spin speed. Start the final spin
by pressing the Start/Stop button.
1200
1000
800
Outerwear
Proofing
– To end the programme without the
final spin:
1000
900
Soft toys
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
First wash
Silks /
1200
600
Pillows
1200
600
To omit rinse and interim spin and
the final spin (No spin)
Curtains
Separate rinse
Starch
1600
1600
^ Select No ..
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage. With some
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
programmes an additional rinse is
introduced if this setting is selected.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 15 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
The display will show the hours and
minutes remaining until the start of the
programme.
To change delay start
You can select a later or earlier
programme end time subsequently, if
you wish.
The current time of day needs to
have been set for delay start to work
correctly.
^ Press the + button.
^ Use the X or Y button to change the
programme end time.
To select delay start
^ Confirm your selection by pressing
ASelect the programme you want and
then press the + button.
the OK button.
The display shows:
To cancel delay start
^ Press the Start/Stop button.
The following will appear in the display:
Delay start
Start time
Finish time
8:20
8:20
Options
11:19
Cancel delay start
;
,
BPress the Y button to select the time
you want the programme to end at.
Activate safety lock
The first press on the button will adjust
the programme end time to the next 15,
30, 45 minutes or full hour. Each
subsequent press on the button will
delay the programme end time by 15
minutes.
^ Confirm your selection by pressing
the OK button.
^ Now you can select a different
programme, or
^ press the Start/Stop button to start
the programme straight away.
Delay start
Start time
Finish time
8:20
15:01
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit later or
earlier than first indicated.
18:00
CConfirm your selection by pressing
the OK button.
DPress the Start/Stop button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Please refer to the separate booklet for information on programmes available as
additional programme packages.
Cottons 9876*
cold to 90°C
Max. load 8.0 kg
Use for
Cotton, linen or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Note
The 60°/40°C programmes differ from the Eco60/Eco40
programmes as follows:
– Shorter programme duration
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required please
select a temperature of 60°C or higher.
Cottons
Use for
Note
Eco60/Eco40
Max. load 8.0 kg
Normally soiled cotton garments
– These settings are the most efficient in terms of energy and
water consumption for washing cottons.
– With Eco60 the actual wash temperature reached will be lower
than 60°C although the wash performance is the same as with
the standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label with
Directive 1061/2010.
Minimum iron
cold to 60°C
Max. load 3.5 kg
43218E76*
Use for
Synthetic, mixed fibre and easy care cotton. If fabrics have a high
proportion of man-made fibres it is advisable to programme the
machine for "Gentle action".
Note
Reduce the spin speed for fabrics which crease easily.
Delicates 4321ac*
cold to 60°C
Max. load 2.5 kg
Use for
Delicate garments made of synthetic fibre, mixed fibre, rayon and
easy care cotton.
Note
Deselect the spin for items which crease easily.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Woollens /ac*
cold to 40°C
Max. load 2.0 kg
Use for
Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.
Note
Reduce the spin speed for items which crease easily.
Hygiene
Use for
30°C to 90°C
Max. load 7.0 kg
Cotton and linen fabric which have been in direct contact with the
skin, e.g. underwear, nappies, towelling, bed linen, pillow and
mattress covers or where high standards of hygiene are required.
Notes
– For optimum hygiene results select a temperature of 60°C or
above.
– Observe the manufacturer's care label.
Express 20 76*
cold to 40°C
Max. load 3.5 kg
Use for
Cotton and minimum iron garments that have hardly been worn or
are only very lightly soiled.
Note
The Short extra option will be activated automatically.
Max. load 1.0 kg
Freshen up
Use for
Notes
Dry, clean garments, which are slightly creased.
– Smaller loads give a better result.
– Remove garments as soon as the programme has finished and
then tumble dry using the Smoothing or Gentle smoothing
programme or place on a hanger to dry.
Automatic plus 7621*
cold to 40°C
Max. load 5.0 kg
Use for
Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Note
The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.
* Please note that the "buckets" represent garment care label symbols. See
"Garment care label symbols".
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Shirts
cold to 60°C
Max. load 2.0 kg
Notes
– Pre-treat collars and cuffs if necessary.
– Wash silk garments in the Silks / programme.
Denim
cold to 60°C
Max. load 3.0 kg
Notes
– Wash denim inside out.
– Denim often contains excess dye and may run during the first
few washes. Wash light and dark coloured items separately.
Dark garments
cold to 60°C Max. load 3.0 kg
Use for
Note
Black and dark garments made from cotton or mixed fibre.
Wash inside out.
Drain / Spin
Notes
– Drain only: Select No . (No spin).
– Make sure you select the appropriate spin speed.
Steam care
Max. load 2.0 kg
Use for
Reducing the amount of creasing in damp, freshly washed and
spun garments.
Notes
– 5-6 shirts make up a load of approx. 2.0 kg.
– Smaller loads give a better result.
– Remove garments as soon as the programme has finished and
then tumble dry using the Smoothing or Gentle smoothing
programme or place on a hanger to dry.
Sportswear
cold to 60°C
Max. load 3.0 kg
Use for
Sportswear such as singlets and leggings as well as microfibre
and fleece garments.
Notes
– Do not use fabric conditioner.
– Observe the manufacturer's care label.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Trainers
Use for
Notes
cold to 40°C
Max. 2 pairs of shoes
Sports shoes only (do not use for leather shoes)
– Observe the manufacturer's care label.
– Remove coarse soiling with a brush before washing.
– Fasten any velco fasteners.
– Do not use fabric conditioner.
– A pre-rinse without detergent is carried out automatically to
remove loose dirt.
– Use a drying basket if drying in a tumble dryer.
Outerwear
cold to 40°C
Max. load 2.5 kg
Use for
Outerwear made from membrane fabrics such as Gore-Tex®,
SYMPATEX®, WINDSTOPPER® etc.
Notes
– Zip up jackets before washing.
– Do not use fabric conditioner.
– If wished these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time
the garment is washed.
Proofing
40°C
Max. load 2.5 kg
Use for
Treating microfibre fabrics, skiwear, and table linen made from
mainly synthetic fibres to provide a water and stain resistant finish.
Notes
– The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Soft toys
Use for
Note
cold to 40°C
Max. load 1.0 kg
Soft toys, specified as machine-washable by the manufacturer.
Do not wash soft toys stuffed with straw.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
First wash
cold to 40°C
Max. load 3.0 kg
Use for
Note
New items made of cotton, towelling and polyester fabric.
Use this programme to wash any manufacturing residues out of
new items.
Silks /
Use for
Note
cold to 30°C
Max. load 1.0 kg
Silks and other handwashable fabrics with no wool content.
Place tights, bras etc. in a washing bag.
Pillows
cold to 90°C
2 pillows (40 x 80 cm) or
1 pillow (80 x 80 cm)
Use for
Note
Washable pillows with feather, down or synthetic fillings.
Please observe the instructions on the wash care label.
Curtains
Use for
cold to 40°C
Max. load 2.0 kg
Curtains, including net curtains, specified as machine-washable
by the manufacturer.
Notes
– A pre-rinse without detergent is carried out automatically to
remove dust.
– For curtains which crease easily, reduce the final spin speed or
deselect the spin.
– Remove weights from curtains.
Separate rinse
Max. load 7.0 kg
Use for
Note
Rinsing handwashed items.
– Reduce the spin speed for fabrics which crease easily.
Max. load 7.0 kg
Starch
Use for
Notes
Starching table cloths, serviettes and workwear
– Reduce the spin speed for fabrics which crease easily.
– The laundry should be washed but not treated with fabric
conditioner.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Washing
Ironing
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
The number of dots indicates the
ironing temperature
I
H
G
Hot iron (max sole plate temp.
approx. 200°C)
Medium hot iron (max sole
plate temp. approx. 150°C)
9
4
c
/
No bar under the symbol: =
normal agitation
Cool iron (max sole plate
temp. approx. 110°C). Do not
steam iron garments carrying
this symbol.
One bar under the symbol: =
reduced agitation
Two bars under the symbol: =
much reduced agitation
J
Do not iron
Hand wash (if no temperature
is specified use the lowest
temperature or cold)
Professional cleaning
f
p
Dry clean only. The letters
indicate the type of cleaning
agent required.
h
Do not wash
w
Professional Wet Clean only
Do not dry clean
Drying
D
The number of dots indicates the
drying temperature
Bleaching
q
r
s
Normal temperature
Low temperature
Do not tumble dry
x
{
Any oxidising bleaching
agent can be used
Only use an oxygen based
bleach or a non-chlorine
bleach
z
Do not bleach
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
Water Rinses Interim
Final
spin
rhythm
level
(
e
e
e
e
d
d
e
e
d
(
e
–
spin
L
L
L
L
–
Cottons
d
(
e
(
e
d
(
e
(
d
e
e
(
e
(
d
e
(
(
–
a
c
f
abc
c
b
b
d
c
c
e
d
d
c
b
b
f
d
d
–
2-41)2)
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Minimum iron
Woollens /
Automatic plus
Shirts
2-33)
2
2-33)
2
Express 20
Dark garments
Delicates
Denim
1-33)
L
L
–
3-43)
3
3
–
Sportswear
Trainers6)
Outerwear
Proofing
2-33)
L
–
2
3
L4)
–
–
Soft toys
(
(
(
e
e
d
e
–
3
3-42)
2-33)
2
L
L
L
–
Hygiene
First wash
Silks /
Pillows
3
–
Curtains6)
Separate rinse
Starch
3
–
2
–
(
–
c
–
–
–
Drain / Spin
–
–
–
Please see next page for description of the symbols
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
d = Low water level
( = Medium water level
e = High water level
a= Intensive rhythm
b= Normal rhythm
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of the Woollens
programme, the drum continues to turn
at intervals for up to 30 minutes to help
prevent creasing.
c= Gentle rhythm
d= Sensitive rhythm
e= Ultra sensitive rhythm
f= Handwash rhythm
The door can be opened and laundry
removed at any time during the
anti-crease phase.
1)
A second rinse is carried out when a
This machine has fully electronic
controls with automatic load
temperature between 60°C and 90°C
has been selected. A third rinse is
carried out when a temperature
below 60°C is selected.
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
2)
A third or fourth rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
– The spin speed has been
deselected.
3)
A third rinse is carried out if:
The display shows the stage the
programme has reached.
– The spin has been deselected.
4)
In the Outerwear programme,
laundry is only spun after the main
wash.
5)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins, to deflate down-filled items.
Subsequent water intake for the main
wash is through compartment j.
6)
Pre-rinse: A pre-rinse without
detergent is carried out automatically
to remove dust.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Interrupting a programme
You can cancel a programme at any
time after it has started.
^ Switch the machine off with the
K button.
^ Press the Start/Stop button.
To continue with the same programme:
^ Switch the machine back on with the
Options
K button.
Cancel programme
;
,
Changing a programme
Activate safety lock
After the start of a programme it is no
longer possible to select a different
programme.
^ Press the OK button.
The suds will be pumped away.
If you want to remove the laundry:
^ Press the Door button.
Temperature
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
If you want to select a different
programme:
^ Switch the machine off with the
Spin speed
K button.
It is possible to change the spin speed
up until the final spin begins.
^ Switch the machine back on again.
^ Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.
Extra options
With the exception of the Express 20
programme, it is possible to select or
deselect the Short and Water plus extra
options up to 5 minutes after the
programme has started.
^ Select and start a new programme.
It is not possible to make any
changes if the safety lock has been
activated.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry
Safety lock
after a programme has started
The safety lock prevents the machine
from being opened or the
programme cancelled during a wash
programme.
^ Press the Door button to open the
drum door.
^ Add or remove items.
^ Close the drum door.
To activate the safety lock
The programme will continue
automatically.
^ Press the Start/Stop button in after
the programme has started.
Please note:
Options
Once a programme has started the
machine cannot recognise any
adjustment to the load.
Activate safety lock
;
,
Back #
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to a change in the
programme duration shown in the
display.
^ Press the X button until Activate
safety lock is highlighted and confirm
by pressing the OK button.
The following will appear in the display:
0 Locked
The safety lock is now activated. It is
deactivated automatically at the end of
the programme.
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
To deactivate the safety lock
^ Press the Start/Stop button.
– the programme has reached the
The following will appear in the display:
Final spin stage.
Deactivate safety lock
If you press the Door button when the
above conditions are present, the
following will appear in the display:
^ Press the OK button. The following
will appear in the display:
1 Unlocked
Door locked
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
All modern detergents produced for automatic washing machines are suitable.
Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets
are suitable for full loads, but note that it may be impractical to reduce tablets for
smaller loads. Some tablets do not dissolve as rapidly as others, and may not be
suitable for programmes with short durations.
Do not use biological detergents on silk as the enzymes may damage the silk.
Instructions for use and recommended dosage amounts are given on the
detergent packaging.
See “Optional accessories” at the end of this booklet for details of Miele
branded care products including detergents and fabric conditioner.
1)
Liquid detergent
For programmes with a pre-wash you will need to purchase a special container
from the Miele Spare Parts Department which sits in the main wash
compartment j. Add liquid detergent to this container for the main wash and
to compartment i for the pre-wash
2)
Use powder detergent
* Specialist detergent
Detergent designed specifically for the wash programme or type of fabric.
** Only use proofing agents containing fluorochemical compounds which are
stated by the manufacturer as being "suitable for use on membrane textiles".
Do not use proofing agents which contain paraffin. Add proofing agents to
compartment §.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Universal Detergent Detergent Specialist Proofing
Fabric
detergent
for
for
detergent* agent** conditioner
coloureds delicates
Cottons
X
X
X
–
X
X
X
–
–
–
X
–
–
–
–
–
X
X
–
–
X
–
X
–
–
X
–
–
–
–
–
X
–
–
–
–
–
–
X
–
X
–
–
–
X
X
X
X
–
–
–
–
–
–
–
–
–
–
–
–
–
X
–
–
–
–
–
–
X
X
X
X
X
X
X
X
X
X
–
Minimum iron
Delicates
Woollens /
Hygiene2)
Express 201)
Automatic plus
Shirts
X
X
X
X
X
X
X
–
–
X
X
X
X
X
X
X
–
Denim1)
Dark garments1)
Sportswear1)
Trainers1)
Outerwear
Proofing
–
–
–
–
–
–
Soft toys1)
First wash
Silks /
–
X
X
–
X
X
X
–
X
–
Pillows1)
X
X
–
X
X
–
Curtains2)
Starch
–
–
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The right amount to dispense will
depend on the following:
Water softeners
A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.
– The soiling level of the load
Lightly soiled
No visible dirt or stains. Possibly
slight body odour.
Normally soiled
Miele branded water softening tablets
are available from the Miele Spare Parts
Department or via the internet on
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Visible dirt and stains and/or dried on
soiling.
Use a quantity of detergent as for soft
water.
– The quantity of the laundry (add the
recommended amount of detergent)
Washing with several components
– The water hardness level.
If you wash using several components
(e.g. special application detergents),
Check with your local water supplier
if you do not know the hardness level we recommend always dispensing the
in your area.
agents into compartment j in the
following order:
1. Detergent
2. Water softeners
3. Stain remover
This way the agents are distributed
more evenly.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners and liquid
starch
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube and
fabric conditioner channel, regularly.
See "Cleaning the detergent
Fabric conditioners make garments soft
to handle and help prevent static cling
when tumble drying.
dispenser drawer". Do not use
powder starch formulations or
viscious liquid starch in the §
compartment as it will clog up.
Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
Adding fabric conditioner or starch
separately
^ Dispense in accordance with
manufacturer's instructions on the
packaging.
^ Dispense liquids into the §
compartment and powder or viscous
formulations into the i
compartment.
^ Turn the programme selector to
Further programmes/Settings 4 and
select the Starch programme.
^ Select a spin speed or the Rinse hold
extra option.
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
^ Press the Start/Stop button.
Colour run and dye removers/
dyes
It will be dispensed automatically in the
last rinse. At the end of the programme
a small amount of water remains in the
fabric conditioner compartment §.
^ Do not use colour run or dye
removers in this machine.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Follow the
manufacturer's instructions carefully.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
A range of Miele branded cleaning and
conditioning products is available to
order from the Miele Spare Parts
Department or via the internet at
,Do not use solvents, abrasive
cleaners, glass cleaners or
multi-purpose cleaning agents.
These might damage plastic
surfaces and other components
because of the chemicals they
contain.
Cleaning the drum (Hygiene
info)
Washing at low temperatures and/or
using liquid detergent can cause
bacteria and unpleasant smells to build
Cleaning the detergent
dispenser drawer
up in the machine. In order to clean the The pre-wash and main wash
drum and also to prevent unpleasant
smells building up, run a Cottons 75°C
programme with powder detergent
once a month or when the Hygiene
info message appears in the display.
compartments of the detergent
dispensing drawer are self-cleaning.
For hygiene reasons, clean the entire
drawer at regular intervals.
External casing and fascia
panel
,Disconnect the machine from the
mains electricity supply and
withdraw the plug from the socket
before cleaning the machine.
,The machine must not be hosed
down.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
^ Clean the casing with a mild
non-abrasive cleaning agent or soap
and water using a well wrung-out
cloth. Wipe dry with a soft cloth.
^ Clean the drawer with hot water.
^ Stainless steel surfaces can be
cleaned with a proprietary stainless
steel cleaning agent, following the
manufacturer's instructions on the
packaging.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the detergent dispenser
drawer housing
^ Clean the siphon.
1. Remove the siphon from
compartment § and rinse under hot
running water. Clean the siphon tube
in the same way.
^ Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.
2. Replace the siphon.
If starching frequently, thoroughly
clean the siphon and siphon tube
regularly. A build-up of starch will
cause them to get clogged.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the filter in the water
inlet
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
The washing machine has a filter to
protect the water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of the
plastic filter bar 2 and remove.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
Check whether
The display remains
There is no power to
dark and the indicator the machine.
lights for the
– the mains plug is plugged
in and switched on.
programme buttons
are not lit up.
– the fuse or circuit breaker
has tripped.
You are asked to enter Access via a code has Enter the code and confirm
a code.
been activated.
the entry. Deactivate the
code if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The display is dark.
The display has
switched off
Press a button. Standby
comes to an end.
automatically to save
energy (Standby
mode).
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
One of the following fault messages appears in the display
Fault message
Possible cause
Remedy1)
Check whether
Fault
Water intake
Open stopcock
The water inlet is
blocked or
2
– the stopcock is
opened properly.
restricted.
– the inlet hose is kinked.
– the water pressure is
too low.
Fault
Check drainage
system
– The water outlet is – Clean the drain filter
2
blocked or
restricted.
and the drain pump.
– The maximum delivery
head is 1 m.
– The drain hose
has been fixed
too high.
Waterproof system
activated
Close the stopcock
The water protection – Close the stopcock.
L
system has reacted.
– Call the Service
Department.
Technical fault xxx
Call Service
There is a fault.
Start the programme
again.
;
If the fault message
appears again, contact
the Service Department.
1)
To switch off the fault message: Switch the machine off with the K button.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The following fault messages appear in the display at the end
of the programme
Fault message
Possible cause
Remedy
Check detergent
Excessive foam has built Check:
up during washing.
– the amount of detergent
used.
– the dosage level, if using
Automatic dispensing.
– Follow the instructions on the
manufacturer's packaging
and also take the degree of
soiling of the laundry into
account.
Hygiene information
A programme using a
In order to prevent bacteria and
temperature above 60°C unpleasant smells building up
has not been run for a
long time.
in the machine, run a Cottons
75°C programme using powder
detergent.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with the load size indicator or calibrating to zero
Problem
Possible cause
Remedy
The display indicates There was already
a load of <25% or no laundry in the drum
load size is indicated when the machine
– Remove the laundry from the
drum.
– Switch off the washing
machine and leave the door
open.
when the drum is
full.
was switched on.
This has decalibrated
the sensor from the
zero setting.
– Switch on the washing
machine.
– Recalibrate the sensor to zero
again.
See "Calibrating the load sensor
to zero" for a description of how
to do this.
The display indicates The load size sensor Rotate the drum once. If the
a load of 25%, 50%, has been display still indicates a load of
decalibrated from the 25%, 50%, 75% or 100%,
75% or 100% when
the drum is empty.
zero setting.
recalibrate the sensor to zero
again (see above section).
The fault message:
The drum door is
closed.
– Open the drum door.
Zero setting not
possible. Open the
door
– Switch off the washing
machine and leave the door
open.
appears in the
display.
– Switch on the washing
machine.
– Try and recalibrate to zero
again.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The machine feet are Level the machine (see
not level. "Installation and
connection").
The laundry has not
The machine detected Include both large and
been spun properly and an imbalance during
small items in the load as
this will give better
is still wet.
the final spin and
reduced the spin
speed automatically.
distribution during spinning.
The pump makes
strange noises.
This is not a fault.
These noises occur at the end of a pump sequence
as a normal part of the operation.
Noises while steam is
being generated.
This is not a fault.
These noises occur when steam is being generated
and when steam is being injected into the drum.
Steam comes out of the This is not a fault.
detergent dispenser
drawer while steam is
being generated.
Some steam may emerge from the detergent
dispenser drawer, depending on the amount of
laundry and the ambient temperature.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
Large amounts of
The water pressure is – Clean the filter in the
detergent residue remain too low.
in the detergent
water inlet.
– It may be useful to select
the Water plus extra
option.
dispenser drawer.
Powder detergent
In future, add washing
powder into the dispenser
drawer first, and then add
the water softener.
used in conjunction
with water softeners
tends to become
sticky.
Fabric conditioner is not The siphon tube is not Clean the siphon (see
completely dispensed or correctly positioned or "Cleaning and care -
too much water remains is clogged up.
Cleaning the detergent
dispenser drawer").
in the § compartment.
The display is in a
different language.
A different language
Set the language you want.
The flag symbol will guide
you.
has been selected
using the "Language
!" setting.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The door will not open
Possible cause
Remedy
The washing machine is
not connected to the
electricity supply and/or is
not switched on.
Insert the plug in the socket and switch on and / or
switch the machine on with the K button.
The safety lock has been
activated.
Deactivate the safety lock as described in
"Changing the programme sequence - Safety
lock".
Access via a code has
been activated.
Deactivate the code as described in the Settings
menu.
Power cut.
Open the drum door as described in the next
section.
The door was not correctly Press hard against the lock side of the drum door
engaged.
and then press the Door button.
There is still water in the
drum and the machine is
unable to drain.
Clean the drain filter and drain pump as described
in the next section.
The door will not open
after the Steam care or
Freshen up programme
has finished.
The Steam care and/or Freshen up programmes
has been started several times one after the other.
The steam has caused the temperature in the
drum to rise above 55°C and the door will not
open to prevent the risk of burning. Wait a few
minutes until the temperature in the drum has
decreased.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
^ Switch the washing machine off.
There is a lever behind the detergent
drawer fascia panel.
Procedure for draining the machine
Be careful not to release too much
water at once. If the flow of water is
too strong, some water can seep
into the washing machine base and
activate the water protection system
float switch. This will prevent the
washing machine from functioning.
^ Place a suitable container under the
access flap.
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Use it to open the access flap.
^ Slowly and carefully unscrew the
drain filter to let the water out.
Blocked drain outlet
If you need to interrupt the flow of
water:
If the drain outlet is blocked, up to
25 litres of water will be retained in the
machine.
^ Tighten the drain filter back up again.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Once the flow of water ceases:
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
To avoid loss of detergent, pour
approx. 2 litres of water into the
detergent dispenser drawer after
cleaning the drain filter. Excess water
will be pumped out automatically
before the next wash programme.
Opening the drum door
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
^ Remove the drain filter completely.
^ Clean it thoroughly.
Reaching into a moving drum is
extremely dangerous.
^ Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
^ Pull the emergency release
downwards (see illustration). The
drum door will open.
obstruction should be removed.
^ Put the drain filter back in place and
secure.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator light marked PC is the
interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele Dealer or
– Miele (see back cover for contact
details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your machine, both of which
are shown on the data plate visible
above the porthole glass when the door
is open.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
purchase. However, you must activate
your cover by calling 0845 365 6640 or
Optional spare parts and accessories
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as
described in these instructions.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aInlet hose with "Waterproof" system
hDetergent dispenser drawer
bElectricity supply cable
iDrum door
c - f Flexible drain hose (with
detachable swivel elbow)
jAccess to drain filter, drain pump
and emergency release
gControl panel
kHandle recesses for moving the
machine
lFour height adjustable feet
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aProtruding lid for holding when
moving the machine
eTransport clip for inlet and drain
hoses
bElectricity supply cable
cInlet hose with "Waterproof" system
dDrain hose
fSafety cap for transit bars
gTransport clip for inlet and drain
hoses and for storing transit bars
when not in use.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Transporting the washing machine to
its installation site
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installation site, hold
it by the edge of the lid where it
protrudes to the rear of the machine as
well as by the handle recesses at the
front.
Please note:
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
^ The machine must be level and
securely positioned.
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
Removing the transit bars
If installing on a wooden joist floor:
^ We recommend a plywood base (at
least 59x52x3 cm). The base should
span several joists and be bolted to
the joists and not only to the
floorboards. Check for the presence
of pipes and cables first.
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a
raised plinth, it has to be secured
against slippage during spin using
retaining clips (available from the
Miele Spare Parts Dept). Otherwise
there is the danger of the machine
moving and falling off the plinth.
^ To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catch at the top.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied, turn the
^ Turn the right-hand transit bar 90°,
left-hand transit bar 90°, then
then
^ withdraw the transit bar.
^ withdraw the transit bar.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.
,The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).
^ Plug the holes with the plastic caps
as illustrated.
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^ Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counternut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
^ Using the spanner supplied turn
counternut 2 in a clockwise direction.
Then turn counternut 2 together with
foot 1 to unscrew.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Washer and Dryer stack
The fitting of building-under kits*
and stacking kits* must only be
undertaken by qualified and
competent persons, in accordance
with the instructions supplied with
the kit.
A Miele tumble dryer can be stacked
with the washing machine. A "WTV"
stacking kit* is necessary.
Please note:
Building under a continuous
worktop/in a kitchen run
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– A special building-under conversion
kit* is required.
To ensure electrical safety, the
washing machine lid must be
replaced by the cover plate supplied
with the conversion kit.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
a Safety distance to wall:
at least 2 cm
b Height:
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Fitting instructions are supplied with the
conversion kit.
All parts marked* are available from
your Dealer, the Miele Spare Parts
Department or via the internet at
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele Waterproof system
2) Electronic unit and washing
machine housing
The Miele Waterproof system protects
the washing machine from water
damage.
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water from
flowing into the machine and water in
the suds container is pumped away.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the washing
machine housing
– Overflow protection
3) the drain hose
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
1) Inlet hose
– The inlet hose is fitted with an
additional electrical safety valve
which works like an automatic
stopcock and is housed in the inlet
hose connection box.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
– It is pressure tested to between
7,000 and 10,000 kPa.
– The inlet hose has a protective
sleeve.
Any leaking water from the inlet hose
is fed into the sump through this
protective sleeve. A float switches off
the safety valve, preventing any
more water from flowing into the
machine and water in the suds
container is pumped away.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water supply The machine should be connected to
the mains water supply in accordance
,The plastic casing of the safety
valve contains electrical
with local and national safety
regulations. The German authorities do
not require it to have a non-return valve
as the washing machine has been
designed to comply with DIN
regulations.
components. The Waterproof system
must only be connected to its own
stopcock. It must not be connected
to mixer taps or similar and must not
be fitted in areas where there is the
risk of water or other liquids
reaching it.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa (1-10 bar). If it is higher
than 1,000 kPa it is essential to fit a
pressure reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
Do not get wet.
The washing machine is not suitable
for connection to a hot water supply.
The protective sleeve of the hose
must not be damaged or kinked.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Maintenance and care
If you intend to unscrew the Miele
Waterproof system hose from the
stopcock it is essential to disconnect
the machine from the electricity supply
first.
Only use a Miele Waterproof system
hose should you need a replacement.
In order to protect the water inlet
valve, the dirt filter in the water inlet
valve connection must not be
removed.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
This hose is tested to withstand
pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
N.B. Using this hose renders the
Waterproof system safety valve on the
inlet hose ineffective.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Please note:
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.
aAdapter
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact the Miele Spare Parts
Department or your Miele Dealer.
bNut
cHose clip
dEnd of the hose
^ Fit adapter a to the sink drain outlet
using nut b.
Drain hose connection:
1. Direct into a sink or basin:
Please note the following:
^ Attach the end of the hose d to
adapter a.
^ Use a screwdriver to tighten hose
– Hook the hose over the edge and
secure.
clip c up close to the nut.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
2. Connected securely to a plastic
drain pipe with a rubber nipple.
There is no need to use a non-return
valve.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm
Width
595 mm
Depth
615 mm
Depth with door open
Height for building under
Width for building under
Depth for building under
Weight
993 mm
820 mm
600 mm
600 mm
98 kg
Capacity
8 kg dry laundry
See data plate
Voltage
Connected load
Fuse rating
See data plate / plug
See data plate
See "Consumption data"
100 kPa (1 bar)
1000 kPa (10 bar)
1.60 m
Consumption data
Water flow pressure minimum
Water flow pressure maximum
Inlet hose length
Drain hose length
Mains connection cable length
Delivery head max.
Maximum drainage length
LEDs
1.50 m
1.60 m
1.00 m
5.00 m
Class 1
Test certificates awarded
See data plate
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Water
Energy
Duration
in kWh
in litres
Cottons
90°C
60°C
60°C
8.0 kg
8.0 kg
4.0 kg
8.0 kg
4.0 kg
8.0 kg
4.0 kg
8.0 kg
4.0 kg
3.5 kg
2.30
1.52
1.15
0.94
0.94
0.96
0.83
0.80
0.66
0.56
64
55
47
55
47
72
47
55
47
52
2 h 29 min
1 h 59 min
1 h 59 min
2 h 59 min
2 h 59 min
2 h 29 min
2 h 29 min
2 h 59 min
2 h 59 min
1 h 52 min
60
Eco
Eco
*
*
60
40°C
40°C
40
Eco
Eco
40
*
Minimum iron
Delicates
Woollens /
Hygiene
40°C
30°C
30°C
60°C
40°C
2.0 kg
2.0 kg
7.0 kg
3.5 kg
1.0 kg
5.0 kg
2.0 kg
3.0 kg
3.0 kg
2.0 kg
3.0 kg
1.5 kg
2.5 kg
2.5 kg
1.0 kg
3.0 kg
1.0 kg
1.0 kg
2.0 kg
0.38
0.23
1.70
0.32
0.20
0.52
0.95
0.52
0.58
0.23
0.50
0.35
0.45
0.35
0.25
0.25
0.25
0.90
0.45
69
39
80
30
–
56 min
39 min
2 h 40 min
20 min
Express 20
Freshen up
Automatic plus
Shirts
16 min
40°C
60°C
40°C
40°C
62
59
52
55
–
1 h 27 min
1 h 11 min
58 min
Denim
Dark garments
Steam care
Sportswear
Trainers
1 h 15 min
16 min
40°C
30°C
40°C
40°C
30°C
30°C
30°C
60°C
40°C
40
35
55
12
45
42
39
44
38
1 h 07 min
57 min
Outerwear
Proofing
1 h 02 min
39 min
Soft toys
52 min
First wash
Silks /
1 h 00 min
36 min
Pillows
1 h 17 min
52 min
Curtains
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Notes for test institutes:
* The test programme conforms to EN 60456 and the energy label with
Directive 1061/2010.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extra options
selected.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Language
!
The Settings menu can be used to
alter the machine's electronics to suit
changing requirements.
The display can be set to appear in
one of several different languages.
Settings can be altered at any time.
You can change the language via the
Language sub-menu.
To open the Settings menu
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
^ Switch on the washing machine.
^ Turn the programme selector to
Further programmes/Settings 4.
The following will appear in the
display:
A tick L will appear beside the
language selected to show that it has
been set.
Further programmes
Time
Settings !
;
,
First select either a 24 hour or 12 hour
clock. Then set the current time of day.
Dark garments
^ Confirm the selection of the
Clock format
highlighted Settings ! option by
pressing the OK button.
^ Use the X or Y button to highlight the
clock format you want and confirm
your selection with the OK button.
To select a setting
^ Press the X or Y button to scroll
through the options until the setting
you want is highlighted and confirm
your selection by pressing the OK
button.
Set the time of day
^ Select Set the time of day sub-menu.
Use the X or Y button to set the time
and confirm your selection with the
OK button.
To close the Settings menu
^ Select Back # or wait for approx. 15
seconds and the display will return to
the programme menu automatically.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Gentle action
Suds cooling
Activating gentle action reduces the
drum action and is suitable for
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
The machine is delivered with the
Gentle action setting deactivated.
The option which is currently set will
– where the drainage pipes do not
comply with DIN 1986.
have a tick L beside it.
The machine is delivered with Suds
cooling deactivated.
Longer pre-wash Cottons
The pre-wash for the Cottons
programme can be extended by 6, 9
or 12 minutes.
The option which is currently set will
have a tick L beside it.
The default setting for the pre-wash is
25 minutes.
If you require a longer pre-wash, it can
be extended.
The option which is currently set will
have a tick L beside it.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Lock code
The following will appear in the display:
The code prevents the washing
machine being used without your
knowledge.
0
Lock code activated
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Once the washing machine is switched
off, it can only be used again if the lock
code is entered.
To use the washing machine when
the lock code is activated
To activate the lock code
Lock code
When the washing machine is switched
on again, the display will request the
code.
Activate
Back #
^ Enter code 125 as described above
^ Press the OK button.
and confirm the entry.
The display will now request that a
code is entered. The code is 125 and
cannot be altered.
The washing machine is now unlocked
and ready for use.
To deactivate the lock code
To enter the lock code
Lock code
Proceed as for activating the lock code.
0 0 0
^ Use the Y or X button to enter the
first number. Confirm your selection
of this number by pressing the OK
button. Now enter the second
number.
^ Repeat the process until all three
numbers have been entered and
confirm your entry of the last number
by pressing the OK button.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Temperature unit
Keypad tone
You can chose for the temperature to
be displayed in °C/Celsius or
°F/Fahrenheit.
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone switched off.
The option which is currently set will
have a tick L beside it.
The option which is currently set will
Buzzer
have a tick L beside it.
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
Brightness
There are ten different display
brightness settings.
You can select one of two volumes or
switch the buzzer off.
The machine is delivered with the
display brightness on setting 5.
The brightness will change as soon as
a different setting is chosen.
Off
(The machine is delivered with this
option selected.)
Contrast
The buzzer is switched off.
There are ten different display
contrast settings.
Normal
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
The machine is delivered with the
display contrast on setting 5.
The contrast will change as soon as a
different setting is chosen.
Loud
The buzzer sounds at maximum volume
(Loud) at the end of a programme or
when Rinse hold is reached.
The option which is currently set will
have a tick L beside it.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Standby display
Memory
To save energy, the display goes out
and the indicator light for the Start/
Stop button starts flashing slowly.
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
The display will always go out,
– if a programme is not selected within
10 minutes of the washing machine
being switched on.
When this programme is chosen again
these settings will appear in the
display.
– 10 minutes after the end of a
programme.
The machine is delivered with the
memory function deactivated.
Pressing one of the buttons switches
the display back on again.
Anti-crease
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
Anti-crease helps prevent creasing
if laundry is not normally removed
immediately after the end of a
programme.
On
The drum will turn at intervals for up to
30 minutes after the programme has
finished. The door can be opened and
items removed at any time during the
anti-crease phase.
The standby function is activated. The
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected)
On
(the machine is delivered with this
option selected)
The standby function is deactivated.
The display will remain visible during a
programme.
Anti-crease is activated.
Off
Anti-crease is deactivated.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Miele washing machines offer perfect
care for your laundry and feature a
wide range of special programmes
designed to suit the fabric being
CareCollection
Miele specialist detergents
"Outdoor wear"
washed. Miele have also developed a
range of specialist CareCollection
detergents and conditioning products
to offer you a complete package for
cleaning and caring for your laundry.
This specialist detergent will clean your
water-repellent outerwear with care.
"Sportswear"
The Miele CareCollection detergents
and conditioning products are listed
below. You can order these and many
other useful products via the internet at:
The Miele Sportswear detergent is
designed to clean sportswear and
remove odours whilst taking care of the
special microfibres used in these
garments.
"Down Items"
This special-purpose detergent
contains a mild tenside and has been
specially formulated to keep down-filled
items supple and to give them bounce.
All the products can also be ordered
via the Miele Customer Contact Centre
(see back cover for contact details).
Miele proofing agent
This special finishing agent reproofs
garments against wind and water and
provides a dirt-repellent finish whilst
retaining elasticity and breathability.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
"UltraWhite" detergent
Liquid detergent "For Delicates"
This multi-purpose powder detergent
has excellent stain removal properties
and is suitable for white and light
coloured laundry as well as heavily
soiled coloured items.
This liquid detergent is ideal for the
gentle treatment of delicate fabrics,
such as wool and silk. Its special
formulation cleans effectively at
temperatures as low as 20°C, while
protecting the colour of your delicate
garments.
"UltraColor" detergent for coloured
garments
Fabric conditioner
This liquid detergent is particularly
suitable for cleaning coloured and dark The Miele fabric conditioner will give
garments. The special formulation
offers effective stain removal, even at
low temperatures, while helping to
prevent colours fading.
your laundry a fresh, natural fragrance.
It makes garments soft to handle and
prevents static build-up during tumble
drying.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/0712/W 5964 WPS
M.-Nr. 09 312 510 / 00
Download from Www.Somanuals.com. All Manuals Search And Download.
|