Metra Electronics Car Stereo System 99 7610B User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7610  
INSTALLATION INSTRUCTIONS FOR PART 99-7610  
APPLICATIONS  
2007-up  
Nissan Versa  
2011 Nissan Juke  
99-7610B  
99-7610HG  
KIT FEATURES  
• DIN head unit provisions with pocket  
• ISO DIN head unit provision with pocket  
• Double DIN mount radio provision  
B = Matte Black  
• HG = Gloss Black  
KIT COMPONENTS  
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate  
WIRING AND ANTENNA CONNECTIONS  
(Sold Separately)  
• 70-7552 - 2007-up Nissan Harness  
• 40-NI12 - 2007-up Nissan Antenna Adapter  
A
B
D
C
TOOLS REQUIRED:  
Panel RemovalTool • Phillips Screwdriver  
Socket Wrench  
METRA. THE WORLD’S BEST KITS.™  
metraonline.com  
1-800-221-0932  
© COPYRIGHT 2011 METRA ELECTRONICS CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610 DASH DISASSEMBLY  
2007-UP NISSAN VERSA  
1. Unclip and remove the panel above  
the radio. (Figure A, B)  
2. Remove (2) Phillips screws securing  
the radio trim panel then unclip and  
remove the entire panel surrounding  
the radio and a/c controls. (Figure C)  
3. Remove (4) Phillips screws securing  
radio, unplug and remove radio.  
(Figure D)  
Continue to kit assembly.  
Figure C  
RADIO  
PRESET A-B-C  
CD  
LOAD  
DISP  
CLOCK  
6CD CHANGER  
RPT  
SCRL  
1
2
3
4
RDM  
SEEK  
TUNE  
FF-REW  
FOLDER  
PUSH  
PWR  
TRACK AUDIO  
FILE  
5
6
AUX  
SCAN  
CAT  
VOL  
CH  
Figure A  
Figure D  
Figure B  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610 DASH DISASSEMBLY  
2011 NISSAN JUKE  
1. Unclip and remove the climate control  
panel. (Figure A)  
2. Remove (2) Phillips screws securing  
the radio trim panel. (Figure B)  
3. Remove (4) Phillips screws securing  
radio, unplug and remove radio.  
(Figure C)  
Continue to kit assembly.  
Figure A  
Figure B  
Figure C  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
DIN HEAD UNIT PROVISION  
Note: You will need to remove the after-  
market radio’s trim ring if equipped.  
Nissan Juke  
1. Cut and remove the appropriate tabs  
not necessary for your application.  
(Figure A)  
Nissan Versa  
Nissan Juke  
2. Slide the DIN cage into the Radio  
Housing and secure by bending the  
metal locking tabs down. (Figure B)  
3. Slide the aftermarket head unit into  
Figure A  
Figure B  
Figure C  
the cage and secure. (Figure C)  
4. Locate the factory wiring harness and  
antenna plug in the dash. Metra  
recommends using the proper mating  
adapters from Metra and/or AXXESS.  
5. Attach the trim plate supplied with  
the kit to the front of the radio  
housing assembly. (Figure C)  
6. Reassemble dash in reverse order  
of disassembly.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
ISO MOUNT RADIO PROVISION  
Note: The following modification will  
need to be made to both ISO brackets  
when using the ISO mount radio  
provision. Cut or trim the area shown  
from the ISO bracket. (Figure A)  
1. Cut and remove the appropriate tabs  
not necessary for your application.  
(Figure B)  
Continued on page 5.  
FRONT  
FACE-  
RIGHT  
SIDE  
BRACKET  
Figure A  
Nissan Juke  
Nissan Versa  
Nissan Juke  
Figure B  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
1. Mount the ISO Brackets to the head  
unit with the screws supplied with  
the unit. (Figure C)  
2. Slide the head unit into the radio  
opening until the side clips engage.  
(Figure D)  
3. Locate the factory wiring harness and  
antenna plug in the dash. Metra  
recommends using the proper mating  
adapters from Metra and/or AXXESS.  
4. Attach the trim plate supplied with  
the kit to the front of the radio  
housing assembly. (Figure D)  
Figure C  
5. Reassemble dash in reverse order  
of disassembly.  
Figure D  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
DOUBLE DIN MOUNT RADIO PROVISION  
1. Mount the factory brackets  
(removed from factory radio during  
disassembly) to the sides of the  
double DIN radio using screws  
supplied with the double DIN radio.  
(Figure A)  
2. Locate the factory wiring harness and  
antenna plug in the dash. Metra  
recommends using the proper mating  
adapters from Metra and/or AXXESS.  
3. Place the DDIN trim plate on the front  
of the DDIN radio. (Figure B)  
Figure A  
4. Reassemble dash in reverse order  
of disassembly.  
Figure B  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
NOTES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
NOTES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7610  
NOTES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION INSTRUCTIONS FOR PART 99-7610  
METRA. THE WORLD’S BEST KITS.™  
metraonline.com  
1-800-221-0932  
© COPYRIGHT 2011 METRA ELECTRONICS CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox International Inc Furnace R LBF User Manual
Lennox International Inc Humidifier 2 4SA13 User Manual
Life Fitness Fitness Equipment Ab Crunch User Manual
Lincoln Electric Welding System 100SG User Manual
Lowrance electronic Automobile Parts EP 70R User Manual
Magnavox DVD Player MDR513H F7 User Manual
Mamiya Camera Accessories Digital Back DCUG1205N01 User Manual
Maximatic Slow Cooker MST 800V User Manual
Mellerware Hot Beverage Maker 3 3 0 0 0 User Manual
Metabo Welding System Invert 130 40 User Manual