Magnavox DVD Player MDR513H F7 User Manual
Owner's Manual  
MDR513H / F7  
HDD & DVD PLAYER / RECORDER  
WITH DIGITAL TUNER  
THANK YOU FOR CHOOSING MAGNAVOX.  
NEED HELP FAST?  
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING  
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.  
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,  
YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM/SUPPORT  
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
© 2010 Funai Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.  
LASER SAFETY  
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this  
apparatus, due to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates  
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing  
or climbing on it. A falling unit can cause serious injury or even death.  
To Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is  
placed too close to them. In this case, please ensure enough space between the external devices and the unit.  
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.  
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few  
hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Note about Recycling  
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
Notice for Progressive Scan Output  
• Consumers should note that not all high definition television sets are fully compatible with this product and may  
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,  
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions  
regarding your TV set compatibility with this 525p(480p) DVD recorder, please contact our customer service center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
3
SAFETY INFORMATION  
Cleaning the cabinet  
• Wipe the front panel and other exterior surfaces of the  
unit with a soft cloth.  
Supplied Accessories  
remote control (NB820UD) with AA (1.5 V) battery x2  
RF coaxial cable (WPZ0901TM002/WPZ0901TM005)  
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)  
owner’s manual (EN/FR) (1VMN29193/1VMN29194)  
quick guide (EN/FR) (1VMN29195)  
• Never use a solvent, thinner, benzene or alcohol to clean  
the unit. Do not spray insecticide liquid near the unit.  
Such chemicals may discolor the surface or damage the  
unit.  
Cleaning discs  
• When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center to out. Do not  
wipe in a circular motion.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for analog  
records.  
Cleaning the disc lens  
• If this unit still does not perform properly  
although you refer to the relevant sections and to  
“TROUBLESHOOTING” in this owner's manual, the laser  
optical pickup unit may be dirty. Consult your dealer  
or an Authorized Service Center for inspection and  
cleaning of the laser optical pickup unit.  
Disc handling  
• Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is  
not used.  
HDD handling  
• HDD is a precision apparatus that is susceptible  
to vibration, strong impact or dirt. Depending on  
the installation environment or handling, the unit  
may become partially damaged or in the worst  
case, recording or replaying may not be available.  
Especially while the HDD is in motion, do not subject  
it to vibration or strong impact or pull out the power  
plug. And if a power failure occurs, the content of the  
recording/replaying program may be lost.  
• HDD rotates at high speed when in operation. Be sure  
that rotation has stopped and then move the unit  
without subjecting it to strong impact or vibration.  
IR signal check  
If the remote control does not work properly, you can test  
if the remote control sends out the infrared signal with  
a digital camera (including built-in camera of cellular  
phone). It will help to define the cause of malfunction.  
With a digital camera (including built-in camera of  
cellular phone):  
Direct a digital camera to remote control, press  
and hold a button on remote control. If infrared  
light appears through digital camera, the remote  
control is working.  
Maintenance  
Servicing  
• Please refer to relevant topics on “TROUBLESHOOTING”  
on pages 114-118 before returning the product.  
• If this unit becomes inoperative, do not try to correct  
the problem by yourself. There are no user-serviceable  
parts inside. Turn the unit to the standby mode, unplug  
the power plug and please call our help line mentioned  
on the front page to locate an Authorized Service  
Center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
EN  
SAFETY INFORMATION  
Trademark Information  
is trademark of Eastman Kodak Company.  
HDMI, the HDMI Logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other  
countries.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
Dolby® Digital Stereo Creator  
“Dolby® Digital Stereo Creator enables consumers to cre-  
ate stereo DVD-Videos with stunning Dolby Digital sound  
tracks at home. The technology, when utilized instead of  
PCM recording, also saves recordable disc space, allowing  
for higher video resolution or extended recording time  
on each DVD. DVDs mastered using Dolby Digital Stereo  
Creator will play back on all DVD-Video players.”  
Note: This is true when the players are compatible with  
actual recordable DVD discs.  
© 2010 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,  
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written  
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is  
strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the content  
herein without the obligation to notify any person or organization of such changes.  
with the  
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without  
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective  
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or  
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is  
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
5
CONTENTS  
Introduction  
Recording  
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .9  
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . . 41  
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 43  
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Recording the DTV Closed Caption . . . . . . . . . . . . . . . . 43  
BASIC RECORDING &  
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 44  
AUTOSTART RECORDING . . . . . . . . . . . . . . . . . . . . . . . . 46  
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 50  
SPECIAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Overwriting from the Beginning of the Title. . . . . . . . 51  
Overwriting in the Middle of the Title . . . . . . . . . . . . . . 51  
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
DUBBING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Information on Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Settings for an External Device . . . . . . . . . . . . . . . . . . . . 54  
Recording from an External Device . . . . . . . . . . . . . . . . 55  
Information on DV Dubbing . . . . . . . . . . . . . . . . . . . . . . . 56  
DVC to HDD/DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . 57  
Selected Title Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
One Title Dubbing (HDD to DVD only) . . . . . . . . . . . . . 61  
PROTECTING A DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 63  
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Connections  
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Antenna Connection (Required) . . . . . . . . . . . . . . . . . . . 15  
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Connecting to a TV Using Audio/Video Jacks . . . . . . 16  
Connecting to a TV Using the S-Video Out Jack . . . . 17  
Connecting to a TV Using  
Component Video Out Jacks . . . . . . . . . . . . . . . . . . . . . . 17  
Connecting to a TV with an HDMI  
Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting to a Cable/Satellite Box . . . . . . . . . . . . . . . 19  
Connecting to a TV without Audio/Video Jacks . . . . 20  
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Basic Setup  
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Finding the Viewing Channel on Your TV . . . . . . . . . . 22  
Guide to On-Screen Display/Menu . . . . . . . . . . . . . . . . 23  
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Switching HDD/DVD Mode . . . . . . . . . . . . . . . . . . . . . . . 27  
How to Insert a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Adding/Deleting Channels. . . . . . . . . . . . . . . . . . . . . . . . 30  
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Switching Analog Mode/  
Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
EN  
CONTENTS  
Playback  
Editing  
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 65  
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 68  
Playing Back an Audio CD and a CD-RW/-R with  
INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . 81  
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
How to Access the Edit Menu. . . . . . . . . . . . . . . . . . . . . . 82  
EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
Deleting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
Deleting Selected Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 85  
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
Chapter Marks (Add) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
Chapter Marks (Delete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88  
Chapter Marks (Delete All). . . . . . . . . . . . . . . . . . . . . . . . . 89  
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Deleting a Scene of a Title . . . . . . . . . . . . . . . . . . . . . . . . . 91  
Protecting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Setting an Index Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 98  
Deleting All Titles in HDD. . . . . . . . . . . . . . . . . . . . . . . . . . 99  
MP3/JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 71  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Fast Forward/Fast Reverse Playback. . . . . . . . . . . . . . . 72  
Variable Skip/Variable Replay . . . . . . . . . . . . . . . . . . . . . 72  
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Slow Forward/Slow Reverse Playback . . . . . . . . . . . . . 73  
Chasing Playback during Recording . . . . . . . . . . . . . . . 73  
Simultaneous Playback and Recording. . . . . . . . . . . . . 73  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Playing Back the Autostart Recording . . . . . . . . . . . . . 76  
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Title/Chapter Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 79  
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 79  
Switching Virtual Surround System . . . . . . . . . . . . . . . . 80  
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Function Setup  
LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100  
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107  
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112  
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113  
Others  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 114  
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119  
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121  
Español  
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
7
FEATURES  
This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on  
HDD or DVD and edit them after that. The following features are offered with this unit.  
Recording  
Dubbing  
This unit allows you to record on the HDD, a DVD+RW/-  
RW (rewritable) and a DVD+R/-R (one-time write). You can  
choose any one for your convenience. Even if you choose  
DVD-RW/-R, these discs will automatically be recorded in  
the DVD+VR mode.  
With this unit, you can enjoy bi-directional dubbing  
between HDD and DVD.  
HDD  
DVD  
High speed dubbing (HDD ➔ DVD only):  
If you dub a title recorded in SLP mode to DVD+R/-R,  
dubbing speed will be 24 times at the maximum.  
HDD  
DVD  
Up to 36 program recording:  
Auto recording mode dubbing:  
You can program the unit to record up to 36 programs  
within a one-month period. Daily or weekly program  
recordings are also available.  
When dubbing, if you set the recording mode to “Auto”,  
the recording mode will automatically be adjusted so the  
titles will fit nicely in the remaining space of the disc.  
One-touch timer recording (OTR):  
DV dubbing:  
You can easily set a recording time as you prefer. Every  
time [REC] is pressed during recording, the recording  
time will be increased by 30 minutes up to 6 hours. The  
recording automatically stops when the recording time  
you set is reached or the disc is full.  
This function helps you to easily dub the contents of the  
DVC (digital video camcorder) to HDD/DVD.  
Playback  
Automatic chapter mark setting:  
Chapter marks will be put on recordings as you set before  
attempting to record.  
Automatic title list making:  
The unit makes a title list with the index automatically.  
HDD  
DVD  
Theater surround sound in your home:  
When connecting the unit to an amplifier or a decoder  
which is compatible with Dolby Digital, you can  
experience the theater surround sound from discs with  
surround sound system.  
Left channel stereo recording:  
This unit can record the sound of the left channel  
monaural input as left and right channels automatically  
(the input from the L2 jacks only).  
Quick search for what you want to watch:  
You can easily find the part you want to watch using the  
search functions. You can search for a desired point by  
title, chapter or time.  
HDD  
320 GB hard disk:  
Virtual surround system:  
This unit is equipped with a 320GB hard disk which allows  
you to record up to 387 hours (with SLP mode).  
You can enjoy stereophonic space through your existing 2  
channel stereo system.  
Autostart recording:  
Variable skip:  
Every time you turn on this unit, this unit automatically  
records the channel currently viewed and temporarily  
stores the recorded content to the HDD. By using this  
function, you can pause or go back the TV program you are  
currently watching, and you can also start recording the  
whole TV program even at the middle of the TV program.  
You can skip forward a certain time, which is specified  
in “Playback” menu in advance, with one-touch while  
playback.  
Variable replay:  
You can skip back a certain time, which is specified in  
“Playback” menu in advance, with one-touch while  
DVD  
playback.  
HDD  
Automatic title finalizing (DVD+R/DVD-RW/-R only):  
You can finalize discs automatically after finishing all  
timer recordings or at the end of the disc space if you set  
this in the main menu.  
Chasing playback during recording and simultaneous  
playback and recording:  
You can play back the already recorded part of the current  
recording or another title during recording.  
Alternate recording:  
DVD  
In the following cases, the unit will detect it and  
automatically record to the HDD even when DVD is  
selected as the recording media.  
Playing back MP3/JPEG/Kodak Picture CD files:  
You can enjoy MP3/JPEG/Kodak Picture CD files which are  
recorded on CD-RW/-R.  
- If there is no recordable disc in the unit  
- If the disc does not have enough space to complete the  
recording  
- If the material is “copy-once” program and prohibited to  
be recorded on a DVD  
- If the disc is not available because the repairing process  
is cancelled halfway  
This feature is available only for timer recording. Not  
available for one-touch timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
EN  
FEATURES  
Editing  
Symbols Used in this Owner's Manual  
HDD  
DVD  
To specify for which media type each function is, we put  
the following symbols at the beginning of each item to  
operate.  
* DVD-RW/-R recorded in VR mode or non compatible  
recording format are not playable.  
* DVD-RW recorded in the mode other than +VR is not  
recordable on this unit unless you erase all contents in  
the disc (refer to page 97).  
* DVD-R recorded in the mode other than +VR is not  
recordable on this unit.  
Deleting a title:  
You can delete a title which you do not need anymore.  
Putting names on titles:  
You can put your favorite names on titles.  
Setting / clearing chapter marks:  
You can set/clear chapter marks on titles.  
Dividing titles:  
You can divide a title into 2 or more.  
HDD  
Deleting a scene of a title:  
You can delete a scene from a title as you like.  
Symbol Description  
DVD  
For Recording, Playing Back, and Editing  
Hiding chapters:  
To keep others from playing back some chapters without  
permission, you can hide chapters.  
Description refers to HDD  
Setting an index pictures:  
Description refers to DVD+RW  
You can change pictures for an index.  
Description refers to DVD+R  
Description refers to DVD-RW  
Putting name on disc:  
You can put your favorite disc name.  
Compatibility  
Description refers to DVD-R  
DVD  
For Playback only  
Available for playing back discs on a regular DVD  
player:  
Description refers to DVD-video  
Recorded discs can be played back on regular DVD  
players, including computer DVD drives compatible  
with DVD-video playback. Although DVD+R are playable  
on other units without finalization in most cases, it  
is recommended to finalize in order to stabilize the  
performance. For DVD-RW/-R, you need to finalize the  
recorded discs to play back on other DVD players.  
Description refers to audio CD  
Description refers to video CD with PBC function  
Description refers to video CD without PBC  
function  
Description refers to CD-RW/-R with MP3 files  
Others  
Description refers to CD-RW/-R with JPEG files  
(Kodak Picture CD files included)  
HDD  
DVD  
Progressive scan system:  
If you do not find any of the symbols listed above under the  
function heading, the operation is applicable to all media.  
Unlike conventional interlace scanning, the progressive  
scan system provides less flickering and images in higher  
resolution than that of traditional television signals.  
HDMI (High-Definition Multimedia Interface)  
You can enjoy clearer audio/video output when  
connecting this unit to a display device with an HDMI-  
compatible port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
9
FUNCTIONAL OVERVIEW  
Front Panel  
1
2
3*  
4
5
6
7 8* 9 10  
15  
14 13 12 11  
( ) The unit can also be turned on by pressing these buttons.  
*
1. y STANDBY-ON button  
10.CHANNEL  
/
buttons  
Press to turn on the unit, or to turn the unit to the  
standby mode. (To completely shut down the unit,  
you must unplug the AC power cord)  
2. Disc tray  
Press to change the channel up and down.  
11.DV-IN jack (L3)  
Use to connect the DV output of external device with  
a DV cable.  
Place a disc when opening the disc tray.  
3. A OPEN/CLOSE button*  
12.AUDIO input jacks (L2)  
Use to connect external device with an RCA audio  
cable.  
Press to open or close the disc tray.  
4. Display  
13.VIDEO input jack (L2)  
Refer to “Front Panel Display” on page 14.  
5. HDD button  
Use to connect external device with an RCA video  
cable.  
Press to select the HDD output mode.  
6. DVD button  
14.S-VIDEO input jack (L2)  
Use to connect the S-video output of external device  
with an S-video cable.  
Press to select the DVD output mode.  
7. C STOP button  
15.Infrared sensor window  
Press to stop playback or recording.  
8. B PLAY button*  
Receive signals from your remote control so that you  
can control the unit from a distance.  
Press to start or resume playback.  
9. I RECORD button  
Press once to start a recording. Press repeatedly to  
start one-touch timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 EN  
FUNCTIONAL OVERVIEW  
Rear Panel  
4
1
2
3
5
VIDEO VIDEO  
IN  
OUT  
Y
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
12 11 10 9  
8
7
6
1. ANTENNA IN jack  
8. COMPONENT VIDEO OUTPUT jacks  
Use to connect an antenna.  
Use to connect a TV monitor with component video  
inputs with a component video cable.  
9. AUDIO OUT jacks  
2. VIDEO IN jack (L1)  
Use to connect external device with an RCA video  
cable.  
3. VIDEO OUT jack  
Use to connect a TV monitor, AV receiver or other  
device with an RCA video cable.  
4. HDMI OUT jack  
Use an HDMI cable to connect to a display with an  
HDMI compatible port.  
5. AC Power Cord  
• Connect to a standard AC outlet to supply power to  
this unit.  
• Unplug this cord from the AC outlet to completely  
shut down the unit.  
Use to connect a TV monitor, AV receiver or other  
device with an RCA audio cable.  
10.S-VIDEO IN jack (L1)  
Use to connect the S-video output of external device  
with an S-video cable.  
11.AUDIO IN jacks (L1)  
Use to connect external device with an RCA audio  
cable.  
12.ANTENNA OUT jack  
Use to connect an RF coaxial cable to pass the signal  
from the ANTENNA IN to your TV.  
6. DIGITAL AUDIO OUTPUT (COAXIAL) jack  
Use to connect an AV receiver, Dolby Digital decoder  
or other device with a digital audio coaxial input jack  
with a digital audio coaxial cable.  
7. S-VIDEO OUT jack  
Use to connect the S-video input of a TV monitor, AV  
receiver or other device with an S-video cable.  
Note  
• Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
• This unit does not have the RF modulator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 11  
FUNCTIONAL OVERVIEW  
Remote Control  
Installing the Batteries in the Remote Control  
Using a Remote Control  
Install the 2 AA (1.5 V) batteries matching the polarity  
indicated inside battery compartment of the remote  
control.  
Keep in mind the following when using the remote  
control:  
Make sure that there are no obstacles between the remote  
control and the infrared sensor window on the unit.  
•
• Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the infrared  
sensor window of the unit.  
• Remote control for different devices can interfere with  
each other. Avoid using remote control for other device  
located close to the unit.  
Open the cover.  
1
• Replace the batteries when you notice a fall off in the  
operating range of the remote control.  
• The maximum operable ranges from the unit are as  
follows.  
- Line of sight: approx. 23 feet (7m)  
- Either side of the center:  
Insert batteries.  
approx. 16 feet (5m) within 30°  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (3m) within 30°  
2
30˚  
30˚  
16feet (5m)  
23feet (7m)  
16feet (5m)  
Make sure to match + and - on the batteries to  
the marks indicated in the battery compartment.  
17  
1
OPEN/  
Close the cover.  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
18*  
19  
2
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
3
CHANNEL  
3
PQRS  
SPACE  
AUDIO  
CLEAR  
4
5
20  
21  
SETUP  
REPEAT  
HDMI  
TITLE  
6
22  
27  
DISC MENU  
Note  
7
8
9
23  
Incorrect use of batteries can result in hazards such as  
leakage and bursting. Please observe the following:  
OK  
24  
25  
DISPLAY  
RETURN  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together.  
Although they may look similar, different batteries  
may have different voltages.  
• Make sure that the + and - ends of each battery  
match the indications in the battery compartment.  
• Remove batteries from battery compartment that is  
not going to be used for a month or more.  
• When disposing of used batteries, please comply  
with governmental regulations or environmental  
public instruction’s rules that apply in your country  
or area.  
V.REPLAY  
V.SKIP  
10  
12  
14  
26  
28  
29  
11  
13*  
RAPID PLAY  
D.DUBBING  
TIMER  
30  
32  
34  
HDD  
DVD  
REC  
15  
16  
31  
33  
REC MODE  
• Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 EN  
FUNCTIONAL OVERVIEW  
( ) The unit can also be turned on by pressing these buttons.  
*
1. DTV/TV button  
18.OPEN/CLOSE A button*  
• Press to switch between digital TV (DTV) mode and  
analog TV (TV) mode.  
• Press to open or close the disc tray.  
19.CHANNEL  
/
buttons  
2. STANDBY-ON y button  
• Press to change the channel up and down.  
20.CLEAR button  
• Press to turn on the unit, or to turn the unit to the  
standby mode. (To completely shut down the unit,  
you must unplug the AC power cord)  
3. Number/Character buttons  
• Press to clear the information once entered, to clear  
the marker settings, or to cancel the programming  
for CD, etc.  
• Press to select channel numbers.  
• Press to select a title/chapter/track/file on display.  
• Press to enter values for the settings in the main  
menu.  
21.HDMI button  
• Press to set the HDMI connector’s video signal  
output mode.  
22.REPEAT button  
• Press to enter title names.  
4. Confirm ( • ) button  
• Press to display the repeat menu.  
23.TITLE button  
• Press to display the title list.  
24.OK button  
Analog mode:  
• Press to confirm the channel selection made by  
[the Number buttons].  
• Press to confirm or select menu items.  
25.RETURN button  
Digital mode:  
• Press to confirm the major/minor channel selection  
made by [the Number buttons].  
5. SETUP button  
• Press to return to the previously displayed menu  
screen.  
26.NEXT G button  
• Press to display the main menu.  
• During playback, press and hold for more than 3  
seconds to switch the progressive scanning mode  
to the interlace mode.  
• During playback, press to skip to the next chapter,  
track or file.  
• When playback is in pause, press repeatedly to  
forward the playback step by step.  
27.V.SKIP button  
• Skips by the amount of time set in advance.  
28.FFW D button  
6. AUDIO button  
• Press to switch the audio language for digital TV.  
• Press to display the audio menu during playback.  
7. DISC MENU button  
• Press to display the disc menu.  
8. Cursor K / L / { / B buttons  
• Press to select items or settings.  
9. DISPLAY button  
• Press to display the display menu on or off.  
10.PREV H button  
• During playback, press to return to the beginning of  
the current chapter, track or file.  
• When playback is in pause, press repeatedly to  
reverse the playback step by step.  
11.V.REPLAY button  
• During playback, press to fast forward the playback.  
• When playback is in pause, press to slow forward  
the playback.  
29.PAUSE F button  
• Press to pause playback or recording.  
30.STOP C button  
• Press to stop playback or recording.  
• Press to exit from the title list.  
31.DVD button  
• Press to select the DVD output mode.  
32.HDD button  
• Press to select the HDD output mode.  
33.REC button  
• Replays by the amount of time set in advance.  
12.REW E button  
• Press once to start a recording.  
• Press repeatedly to start the one-touch timer  
recording.  
• During playback, press to fast reverse the playback.  
• When playback is in pause, press to slow reverse  
the playback.  
34.REC MODE button  
13.PLAY B button*  
• Press to start playback or resume playback.  
14.RAPID PLAY button  
• Press repeatedly to switch the recording mode.  
• During playback, press to play back in a slightly  
faster/slower mode while keeping the sound  
output.  
15.D.DUBBING button  
• During playback, press to start dubbing right away.  
• In stop mode, press to display “Dubbing” menu.  
16.TIMER button  
• Press to display the timer programming list.  
17.SOURCE button  
• Press to select the appropriate input.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 13  
FUNCTIONAL OVERVIEW  
Front Panel Display  
2
3
DTV BS CS  
DR  
CD  
VCR  
1
PM  
4
DB HDD  
DVD  
5
1.  
4. Current status of the unit  
5. Displays the following  
: Appears in the afternoon  
with the clock display.  
• Elapsed playback time  
• Current title/chapter/track /file  
number  
• Recording time/remaining time  
• Clock  
• Channel number  
• Remaining time for one-touch  
timer recording  
• Selected HDMI output mode  
: Appears when playback is  
paused.  
PM  
2.  
: Appears when playing back  
an HDD or disc.  
: Appears when the channel  
is in DTV mode.  
DTV  
: Appears when the timer  
programming or OTR has  
been set and is proceeding.  
: Flashes when timer  
programming was not  
executed because of some  
error.  
3. Title/track/file and chapter mark  
: Appears when indicating a  
title/track/file number.  
: Appears when indicating a  
chapter number.  
: Appears during recording  
process.  
: Flashes when a recording  
pauses.  
: Appears when a disc is in  
this unit.  
: Appears during dubbing.  
DB  
: Appears when the unit is in  
HDD mode.  
HDD  
: Appears when the unit is in  
DVD mode.  
DVD  
Display Message  
Appears when the disc tray is  
opening.  
Appears when HDMI output  
mode (480p) is selected.  
Appears when HDMI output  
mode (720p) is selected.  
Appears when the disc tray is  
closing.  
Appears when a disc is loaded  
on the disc tray.  
Appears when HDMI output  
mode (1080i) is selected.  
Appears when data is being  
recorded on a disc.  
Appears when HDMI output  
mode (1080p) is selected.  
Appears when the PBC function  
is activated. (Video CD playback  
only. Refer to page 66.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 EN  
CONNECTION  
Read this first:  
1) Disconnect the AC power cords of the devices from the AC outlet.  
2) Make the connection as illustrated below.  
3) After making all the connections, connect the AC power cords of the devices.  
•
•
Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be  
distorted due to the copy protection system.  
When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.  
Antenna Connection (Required)  
rear of this unit  
RF coaxial  
cable  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
(L1)  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
ANT. IN  
This connection is for  
TV loop through only  
IN  
VHF / UHF  
antenna  
OUT  
or  
ANTENNA  
RF coaxial  
cable  
cable TV  
company  
Choose one of the following connections  
depending on the jacks on your TV.  
Note  
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before  
moving the unit.  
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be  
more effective than set-top versions.  
• ANTENNA OUT jack is for tuner pass through only. HDD/DVD playback through the RF is not possible.  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Overview  
Refer to  
If Your TV has  
Higher  
Quality  
HDMI IN  
page  
18  
If you are using  
cable / satellite box  
page  
19  
page  
17  
COMPONENT VIDEO IN  
S-VIDEO IN  
If your device has  
only an ANT. IN jack  
page  
17  
page  
20  
page  
16  
ANT. IN  
Standard  
Quality  
R
L
AUDIO IN VIDEO IN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 15  
CONNECTION  
Connecting to a TV Using Audio / Video Jacks  
VIDEO IN  
RCA video cable  
RCA audio cable  
VIDEO  
OUT  
AUDIO IN  
L
L
R
R
AUDIO OUT  
rear of this unit  
VIDEO VIDEO  
IN OUT  
Y
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
ANT. IN  
This connection is for  
TV loop through only  
RF coaxial  
cable  
VHF / UHF  
antenna  
IN  
OUT  
or  
RF coaxial  
cable  
ANTENNA  
cable TV  
company  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 EN  
CONNECTION  
Connecting to a TV Using the S-Video Out Jack  
AUDIO IN  
VIDEO  
OUT  
L
RCA audio cable  
S-video cable  
L
R
S-VIDEO IN  
R
OUT  
AUDIO OUT  
S-VIDEO  
ANT. IN  
This connection is for  
TV loop through only  
VHF / UHF  
antenna  
RF coaxial  
cable  
rear of this unit  
IN  
VIDEO VIDEO  
IN OUT  
Y
IN  
RF coaxial  
cable  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
OUT  
or  
cable TV  
company  
ANTENNA  
Connecting to a TV Using Component Video Out Jacks  
AUDIO IN  
L
RCA audio cable  
R
COMPONENT  
VIDEO IN  
(Green)  
(Blue)  
(Green)  
(Blue)  
(Red)  
Y
VIDEO  
OUT  
Y
RCA component  
video cable  
L
PB  
/CB  
(Red)  
PR  
/CR  
R
COMPONENT  
AUDIO OUT  
VIDEO OUTPUT  
rear of this unit  
ANT. IN  
This connection is for  
TV loop through only  
RF coaxial  
cable  
VIDEO VIDEO  
IN OUT  
Y
IN  
L
L
VHF / UHF  
antenna  
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
IN  
RF coaxial  
cable  
OUT  
or  
cable TV  
company  
ANTENNA  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables at your local store.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 17  
CONNECTION  
Connecting to a TV with an HDMI Compatible Port  
• HDMI outputs the video/audio signals without converting to analog signals.  
• No audio connection is required.  
HDMI IN  
HDMI cable  
HDMI OUT  
rear of this unit  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
ANT. IN  
This connection is for  
TV loop through only  
VHF / UHF  
antenna  
IN  
Do not tilt the connector when inserting it into the HDMI jack, and make sure the  
shapes of the jack and the connector are matched.  
OUT  
or  
RF coaxial  
cable  
RF coaxial  
cable  
cable TV  
company  
ANTENNA  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
Please purchase the rest of the necessary cables at your local store.  
HDMI Mode and Actual Output Signals  
Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.  
Front Panel Display Video Output Signal  
Copyright protection system  
480 Progressive  
To play back the digital video images of a DVD via an HDMI  
connection, it is necessary that both the player and the  
Press [HDMI]  
display device (or an AV amplifier) support a copyright  
720 Progressive  
1080 interlaced  
1080 Progressive  
protection system called HDCP (high-bandwidth digital  
content protection system). HDCP is copy protection  
technology that comprises data encryption and  
Press [HDMI]  
Press [HDMI]  
Press [HDMI]  
authentication of the connected AV device. This unit  
supports HDCP. Please read the operating instructions of  
your display device (or AV amplifier) for more information.  
*HDMI: High Definition Multimedia Interface  
• The HDMI mode that is not supported by display device will be skipped.  
Note  
• Some devices with an HDMI input may not operate properly with this unit.  
• When using an HDCP-incompatible display device, the image will not be viewed properly.  
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled  
by another device via the HDMI connector.  
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be  
limited by the device that is connected.  
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device  
such as this unit, audio signals are not output from the HDMI output connector.  
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,  
the signals are output in digital RGB.  
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set  
the HDMI setting again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 EN  
CONNECTION  
Connecting to a Cable / Satellite Box  
RCA video cable  
RCA audio cable  
VIDEO IN  
RCA video cable  
VIDEO VIDEO  
IN  
OUT  
R
L
AUDIO OUT VIDEO OUT  
AUDIO IN  
L
L
RCA audio  
cable  
L
cable/satellite box  
R
R
R
IN  
AUDIO IN  
S-VIDEO AUDIO OUT  
(
)
L1  
rear of this unit  
ANT.OUT ANT. IN  
ANT. IN  
satellite  
dish  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
This connection is for  
TV loop through only  
OUT  
R
R
RF coaxial cable  
IN  
S-VIDEO AUDIO OUT  
OUT  
S-VIDEO  
COAXIAL  
AUDIO IN  
ANTENNA  
(
)
L1  
IN  
RF coaxial  
cable  
or  
cable TV  
company  
RF coaxial  
cable  
OUT  
ANTENNA  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note  
• Required cables and connecting methods differ depending on the cable/satellite box.  
For more information, please contact your cable/satellite provider.  
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUTPUT jack  
or HDMI OUT jack for connecting to your TV.  
With this setup:  
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the  
cable/satellite box is turned on.  
• You cannot record one channel while watching another channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 19  
CONNECTION  
Connecting to a TV without Audio / Video Jacks  
VHF / UHF  
antenna  
rear of this unit  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
RF coaxial  
cable  
IN  
VIDEO  
OUT  
RCA video  
cable  
or  
L
cable TV  
company  
OUT  
R
ANTENNA  
AUDIO OUT  
RCA audio cable  
ANT. IN  
rear of your RF modulator  
(not supplied)  
RF coaxial cable  
RF coaxial cable  
Set channel 3 or 4  
3
4
R
L
ANT. IN CHANNEL  
AUDIO IN VIDEO IN TO TV  
Set channel 3 or 4  
Supplied cables used in this connection are as follows:  
• RF coaxial cable x 1  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note  
• RF modulator is not supplied with this unit. You need to purchase it at your local store.  
• The quality of picture may become poor if this unit is connected to an RF modulator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 EN  
CONNECTION  
Digital Audio Connection  
Coaxial Cable Connection  
Dolby Digital decoder  
rear of this unit  
COAXIAL  
VIDEO VIDEO  
Y
IN  
OUT  
digital audio  
coaxial cable  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
COAXIAL  
digital audio  
coaxial input jack  
HDMI Audio Connection  
AV receiver / amplifier with an HDMI input jack  
rear of this unit  
VIDEO VIDEO  
IN OUT  
Y
IN  
L
L
HDMI IN  
OUT  
R
R
HDMI cable  
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
HDMI OUT  
To set up “HDMI Audio” refer to pages 102 and 112.  
To set up “Dolby Digital” refer to pages 100 and 105.  
Dolby Digital  
Audio format (disc)  
HDMI  
Digital Output  
Setting of this unit  
PCM  
2 channel PCM  
Dolby Digital  
2 channel PCM  
Dolby Digital  
Dolby Digital  
Stream  
PCM  
2 channel PCM  
LPCM  
Stream  
Actual Output  
Cables not included.  
Please purchase the necessary cables at your local store.  
Note  
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound  
by an MD or DAT deck.  
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel  
surround sound as movie theaters.  
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.  
2 Channel Analog Audio Connection  
stereo system  
VIDEO  
OUT  
analog audio  
rear of this unit  
input jacks  
L
VIDEO VIDEO  
IN OUT  
Y
IN  
L
L
AUDIO IN  
R
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
R
AUDIO OUT  
RCA audio cable  
Supplied cables used in these connections are as follows:  
• RCA audio cable (L/R) x 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 21  
BEFORE YOU START  
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.  
Finding the Viewing Channel on Your TV  
After you have made all the  
necessary connections, press  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
2
3
[STANDBY-ON y] to turn on the unit.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Turn on your TV.  
• If connected to your VCR make sure it is  
switched off or in standby mode before  
proceeding.  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
Press “2” on the TV’s remote control,  
then press channel down button  
repeatedly until you see “Initial  
Setup” menu.  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Initial Setup  
OK  
OSD Language  
DISPLAY  
RETURN  
English  
Français  
Español  
V.REPLAY  
V.SKIP  
Select the language for Setup display  
This is the correct viewing channel (external  
input channel) for the recorder.  
RAPID PLAY  
• For some TVs, there may be a button on the  
TV’s remote control that accesses the external  
input channel. It may be labeled “SOURCE”,  
“AV”, or “SELECT”. In such case, press it  
repeatedly. Refer to your TV’s user manual for  
details.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
• If more than 10 minutes have past since you  
have turned on the unit, you may see the  
MAGNAVOX screen saver instead of “Initial  
Setup” menu.  
MAGNAVOX screen saver:  
Input Mode Names for Common TV Brands (Example)  
Admiral AUX Panasonic TV/VIDEO  
RCA INPUT, TV/VCR,  
Curtis  
LINE1, LINE2,  
00, 90, 91, 92, 93  
Mathis  
00, 90, 91, 92, 93  
GE  
INPUT, TV/VCR, Samsung TV/VIDEO  
00, 90, 91, 92, 93  
Hitachi  
JVC  
INPUT, AUX  
VIDEO, VIDEO 1, Sharp  
VIDEO 2, VIDEO 3  
Sanyo  
VIDEO  
00  
Kenwood AUX  
Sony  
VIDEO1, VIDEO2,  
VIDEO3  
Proceed to step 2 in “INITIAL  
SETTING” on page 28.  
LXI-Series 00  
Magnavox AUX CHANNEL  
Toshiba  
Zenith  
TV/GAME  
00  
4
Note  
• Video input selection varies for different brand’s  
models of TVs.  
• Consult your TV manufacturer if none of the above is  
successful.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 EN  
BEFORE YOU START  
This unit uses the following on-screen displays and menus to guide you to the easy operations.  
The on-screen displays give you the information on the loaded disc or the disc/file in playback, or the HDMI status, etc.  
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.  
Guide to On-Screen Display / Menu  
The on-screen display changes in the following order  
DTV Program Guide  
as you press [DISPLAY].  
1
2
3
4
5
6
7
8
PROGRAM TITLE NAME  
OFF  
69.1  
WLIW-DT  
ENGLISH  
90  
TV-PG  
INFORMATION-1  
INFORMATION-2  
INFORMATION-3  
INFORMATION-4  
INFORMATION-5  
INFORMATION-6  
DTV Program Guide (only in DTV mode)  
Autostart Recording Information  
(only in HDD mode with no titles are playing back)  
HDD / DVD Information/Menu  
1. Program title (max. 2 lines displayed)  
2. Closed Caption (Indicates that the program being  
broadcast is available with closed captioning.)  
3. Signal strength (Indicates the signal strength of the  
current channel.)  
4. Program guide (max. 6 lines displayed)  
5. Channel number  
Title Name Information  
(only when DVD+RW/DVD+R/DVD-RW/DVD-R, or HDD  
is in playback)  
or  
File Name Information  
(only when a CD with MP3/JPEG/Kodak Picture CD files  
6. Broadcast station  
is in playback)  
7. Audio language (“Other” is displayed when the  
audio language cannot be acquired, or the acquired  
languages are other than English, Spanish or French.)  
8. Program rating  
MP3 Tag Information  
(only when an MP3 file is in playback)  
Note  
HDMI Information  
• When the program guide is displayed in more than 6  
lines, use [K / L] to scroll.  
(only for the images output through the HDMI output)  
• “No description provided.” is displayed when the  
program guide is not provided.  
Autostart Recording Information  
7
2:59:44 / 3:31:31  
CH 10  
5
6
7:10AM  
10:42AM  
41  
4
10:10AM  
42 43  
1. Starting time of the autostart recording  
2. Status of the time autostart recording  
Live: Indicates when watching live TV  
B
: Indicates when playing back the autostart recording.  
3. The time that the picture currently displayed on the  
screen is broadcasted  
4. Current time  
5. The progress of the autostart recording  
6. Current point of the playback of the autostart recording  
7. Elapsed time of the playback of the autostart  
recording/total time of the autostart recording  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 23  
MP3 Tag Information  
• If you press [DISPLAY] one more time, album name  
will be displayed.  
Album Name  
• If there is no artist, track or album name, “Not Available”  
will be displayed.  
HDMI Information  
1
2
Video Info.  
Audio Info.  
:
:
480p  
Bitstream  
/
YCbCr  
3
4
*1. Indicates the resolution of the HDMI output image.  
*2. Indicates the HDMI video format.  
*3. Indicates the HDMI audio format.  
4. Indicates current disc status.  
* “- - -” will be displayed, when it does not have any  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
Main Menu  
Press [SETUP] to display the main menu. Then use  
[K /L] to select a menu and press [OK] to display the  
menu. These menus provide entries to all main functions  
of the unit.  
1. General Setting:  
To go to general setting menu.  
2. Timer Programming:  
To program a timer recording.  
3. Title List:  
To call up the title list.  
4. Disc Edit:  
To set up the DVD setting.  
5. HDD Menu:  
To set up the HDD setting.  
6. Dubbing:  
Setup  
General Setting  
1
Timer Programming  
2
Title List  
3
Disc Edit  
4
HDD Menu  
45  
Dubbing  
46  
DISC Playback Mode  
47  
• To dub the content of the HDD to DVD or vice versa.  
• “Dubbing” is available only when a recordable disc is  
loaded.  
7. DISC Playback Mode:  
To set up the disc playback setting.  
• “DISC Playback Mode” is available only when, an audio  
CD, a video CD, a CD-RW/-R with MP3/JPEG/Kodak  
Picture CD files is inserted into the unit.  
General Setting Menu  
1. Playback:  
To set up the unit to play back discs as you prefer.  
2. Display:  
To set up the OSD screen as you prefer.  
3. Video:  
General Setting  
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
1
2
3
4
5
26  
37  
48  
Parental Lock  
Disc Audio  
Disc Menu Language  
Audio Language  
Subtitle Language  
Angle Icon  
To set up the video setting.  
Reset All  
Still Mode  
Variable Skip / Replay  
4. Recording:  
To set up the unit to record to discs as you prefer.  
5. Clock:  
To set up the clock of the unit as you need.  
6. Channel:  
To adjust the channel setting of the unit as you prefer.  
7. HDMI:  
To set up the HDMI connection setting.  
8. Reset All:  
To reset the setting to the factory default.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 25  
BEFORE YOU START  
Disc Edit / HDD Menu / Dubbing / DISC Playback Mode  
1. Edit Disc Name:  
<Disc Edit menu (DVD+RW)>  
Allows you to rename the disc.  
Disc Edit  
1
2
3
4
2. Erase Disc: (DVD+RW/DVD-RW only)  
Allows you to erase all contents in the disc and format it.  
3. Make Edits Compatible: (DVD+RW only)  
Allows you to memorize the editing status on the  
disc if you have added or deleted chapters, or made  
chapters hidden on this unit, and to effect it when  
playing back on the other unit.  
Finalize: (DVD+R/DVD-RW/-R only)  
Allows you to finalize a disc containing recorded titles.  
4. Disc Protect :  
Allows you to protect a disc from accidental editing or  
recording.  
5. Random Play:  
Allows you to activate the random playback feature.  
6. Program Play: (audio CD/video CD only)  
Allows you to activate the program playback feature.  
7. PBC (Video CD only):  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect OFF  
ON  
<Disc Edit menu (DVD-RW)>  
Disc Edit  
1
2
3
4
Edit Disc Name  
Erase Disc  
Finalize  
Disc Protect OFF  
ON  
<Disc Edit menu (DVD+R/DVD-R)>  
Disc Edit  
1
23  
34  
Edit Disc Name  
Finalize  
Disc Protect OFF  
ON  
<DISC Playback Mode menu (audio CD/VCD)>  
Allows you to select images or information on the  
menu screen by activating PBC (playback control)  
function.  
DISC Playback Mode  
15  
26  
37  
4
Random Play  
Program Play  
PBC (Video CD only)  
8. Music/Photo: (Mixed media disc only)  
When a mixed media disc is inserted, this menu screen  
will appear instead of “DISC Playback Mode” menu  
allowing you to select the media you want to play.  
9. Slide Show: (JPEG/Kodak Picture CD files only)  
Allows you to select the display time of the slide show  
mode.  
<DISC Playback Mode menu (MP3/JPEG)>  
DISC Playback Mode  
18  
Music  
Photo  
Random Play  
Slide Show  
25  
29  
10.Delete All Titles:  
<HDD Menu>  
HDD Menu  
Allows you to delete all titles, including the protected  
titles, in the HDD title list.  
11.Delete All Unprotected Titles:  
Allows you to delete all unprotected titles in the HDD  
title list.  
10  
1
Delete All Titles  
Delete All Unprotected Titles  
1
2
1
12.HDD DVD:  
<Dubbing menu>  
Allows you to dub from HDD to DVD.  
13.DVD HDD:  
Dubbing  
12  
1
HDD  
DVD  
DVD  
HDD  
13  
2
Allows you to dub from DVD to HDD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 EN  
BEFORE YOU START  
Switching HDD / DVD Mode  
Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode)  
you wish to operate.  
HDD mode  
DVD mode  
Press [HDD] to activate the HDD component.  
Press [DVD] to activate the DVD component.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
DVD button  
HDD button  
RAPID PLAY  
HDD button  
DVD button  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
How to Insert a Disc  
1) Press [OPEN/CLOSE A] to open the disc tray.  
2) Place the disc on the disc tray with its label side facing up.  
Align the disc to  
the disc tray guide.  
3) Press [OPEN/CLOSE A] to close the disc tray.  
It may take a while to load  
the disc.  
To eject the disc:  
Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning the unit to the standby mode.  
• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.  
• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 27  
INITIAL SETTING  
You need to follow these steps when you turn on this unit for the first time.  
Follow the procedure in “Finding the  
Viewing Channel on Your TV” on  
page 22 to display “Initial Setup”  
menu.  
1
2
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L] to select your desired  
language, then press [OK].  
Initial Setup  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
PQRS  
OSD Language  
English  
Français  
Español  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
Use [K / L] to select the type of  
broadcasting signal, then press [OK].  
DISC MENU  
3
Initial Setup  
OK  
Channel Preset  
DISPLAY  
RETURN  
Make sure the antenna is  
connected to “ANTENNA IN” jack.  
Antenna  
Cable (Analog)  
V.REPLAY  
V.SKIP  
Cable (Analog / Digital)  
Auto Preset will scan all terrestrial channels.  
This may take a while to complete.  
RAPID PLAY  
The unit will start getting channels available in  
your area.  
Antenna:  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
(When using antenna)  
The channels broadcasted in analog TV and  
digital TV are automatically scanned and  
memorized. Only the receivable channels in the  
area will be memorized.  
Cable (Analog):  
(When using basic cable)  
The channels broadcasted in analog CATV are  
automatically scanned and memorized.  
Cable (Analog / Digital):  
(When using basic cable)  
The channels broadcasted in analog CATV and  
digital CATV are automatically scanned and  
memorized.  
CH  
1
Auto Presetting Now  
If a PBS (public broadcasting station) is available  
in your area, clock setting will automatically be  
performed and the correct clock will be displayed  
following the channel preset procedure.  
Initial setting is then complete.  
Press [RETURN] to exit.  
4
If a PBS (public broadcasting station) is not  
available in your area, press [OK]. Then proceed  
to step 5 in “Manual Clock Setting” on page 34.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 EN  
CHANNEL SETTING  
If you have changed antenna connection, we recommend that you program available channels in your area with the  
following procedures.  
Auto Channel Scan  
Press [SETUP] and use [K / L] to  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
select “General Setting”, then press  
1
[OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
“General Setting” menu will appear.  
CHANNEL  
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
PQRS  
2
3
4
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
Use [K / L] to select “Auto Channel  
Preset”, then press [OK].  
DISC MENU  
Use [K / L] to select the type of  
broadcasting signal, then press [OK].  
OK  
DISPLAY  
RETURN  
Auto Channel Preset  
V.REPLAY  
V.SKIP  
Antenna  
Cable (Analog)  
Cable (Analog / Digital)  
The unit will start getting channels available in  
your area.  
RAPID PLAY  
• When aerial antenna is connected, select  
“Antenna”.  
• When connected to CATV, select “Cable  
(Analog)” or “Cable (Analog/Digital)”.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
To cancel the auto channel preset during  
scanning:  
Press [RETURN] to go the previous screen or  
[SETUP] to cancel.  
When scanning is over, press [SETUP]  
to exit.  
5
To cycle through only the memorized channels, use  
[CHANNEL  
/
].  
To select a channel directly (including the ones not  
memorized), use [the Number buttons] and [ • ] (for  
digital TV channels).  
Note  
• If the auto channel preset is cancelled during  
presetting, some channels not yet preset may not be  
received.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 29  
CHANNEL SETTING  
Adding / Deleting Channels  
You may want to add or delete TV channels if your  
channel lineup changes or if you no longer watch some  
channels.  
Adding channel is only available for the analog TV  
channels.  
Press [DTV/TV] to select the mode  
(DTV or TV) to/from which you want  
to add/delete channels.  
1
2
Make sure  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
• You perform “Auto Channel Scan” before adding or  
deleting the channels.  
[OK].  
“General Setting” menu will appear.  
OPEN/  
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
3
CHANNEL  
Use [K / L] to select “Manual Channel  
Preset”, then press [OK].  
PQRS  
4
Auto Channel Preset  
Manual Channel Preset  
TV Audio Select  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
• If you are adding or deleting analog TV/CATV  
channels, go to  
to continue.  
ANALOG  
DISC MENU  
• If you are deleting digital TV/CATV channels, go  
to to continue.  
DIGITAL  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 EN  
CHANNEL SETTING  
ANALOG  
DIGITAL  
Select the channel number to add or  
delete.  
Select the channel number to delete.  
• Only the major channel is displayed in “Manual  
Channel Preset” menu. (The channel number  
displayed in the parenthesis is a virtual channel  
number)  
• Use [CHANNEL  
/
] to cycle through only  
5
6
5
the memorized channels.  
• Use [{ / B] to cycle through all the channels  
including the ones not memorized.  
• Use [the Number buttons] to select a channel  
directly.  
• When a memorized channel is selected, “Add”  
is checked and highlighted as a default.  
• When an unmemorized channel is selected  
“Delete” is checked and highlighted as a  
default.  
• Use [CHANNEL  
/
] to cycle through only  
the memorized channels.  
• You cannot use [{ / B] for the digital TV  
channel selection.  
• Use [the Number buttons] to select a channel  
directly.  
• When a memorized channel is selected, “Add”  
is checked and highlighted as a default.  
• When an unmemorized channel is selected  
“Delete” is checked and highlighted as a  
default.  
Use [K / L] to select “Add” or  
“Delete”, then press [OK].  
Manual Channel Preset  
Use [K / L] to select “Delete”, then  
press [OK]. Then select the next  
channel to delete.  
6
CH  
2
Add  
Delete  
• If the setting is complete, press [RETURN] to  
activate “Manual Channel Preset”.  
Manual Channel Preset  
Your setting will be activated and it will  
automatically switch to the next channel so that  
you can continue adding or deleting channels.  
DTV  
2
(CH - - - )  
Add  
Delete  
Press [SETUP] to exit.  
Your setting will be activated.  
7
WARNING:  
• For the digital TV channels, you cannot recover the  
deleted channels once they are deleted unless you  
perform the auto channel preset again.  
Press [SETUP] to exit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 31  
SETTING THE CLOCK  
Auto Clock Setting  
This unit can set the time and date automatically by  
referring to a channel that carries a clock information. If a  
PBS (public broadcasting station) is available on Cable in  
your area, follow “Auto Clock Setting” below. If not, follow  
“Manual Clock Setting” on page 34.  
Make sure  
• The cable TV connections are correct.  
• Channels are set. (Refer to page 29.)  
ANALOG AUTO CLOCK SETTING (Cable TV only)  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
1
2
3
4
[OK].  
“General Setting” menu will appear.  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L] to select “Auto Clock  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Setting”, then press [OK].  
CHANNEL  
Use [K / L] to select “Auto”, then  
PQRS  
press [OK].  
SPACE  
AUDIO  
CLEAR  
Auto Clock Setting  
OFF  
Auto  
Manual  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Press [SETUP] to exit.  
OK  
5
6
DISPLAY  
RETURN  
Press [STANDBY-ON y] to turn the  
unit to the standby mode.  
V.REPLAY  
V.SKIP  
This unit will search for the time only when the  
power is in the standby mode. Initially leave it in  
standby mode for at least 15 minutes to give this  
unit time to set the clock. Once the clock is set, the  
unit receives the clock data at 12:00 am & 12:00 pm  
when unit is in standby mode. Check the time after  
the Auto Clock was set, if it is incorrect time then set  
the “Auto Clock Setting“ to “OFF” in step 4 above.  
Then try “Manual Clock Setting“ on page 34.  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Manual Auto Clock Setting  
If the unit chooses an incorrect PBS channel on Cable  
TV, set the PBS channel manually by following the steps  
below.  
Select “Manual” at step 4 above, then  
press [OK].  
1
Note  
• The clock may set itself automatically after you  
connect the antenna/cable signal and plug in the  
power cord.  
Use [the Number buttons] or [K / L]  
to enter your Cable TV Analog PBS  
channel number, then press [OK].  
2
3
• Only the Analog PBS channel Cable TV signal is  
effective for auto clock setting.  
• For analog auto clock setting, incorrect time may be  
obtained depending on the broadcast information. If  
this occurs, set the “Auto Clock Setting” to “OFF” at  
step 4 above and try “Manual Clock Setting” on page  
34.  
Set Channel No.  
CH  
1
Press [SETUP] to exit and turn the  
unit to the standby mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 EN  
SETTING THE CLOCK  
Auto Clock Setting (cont’d)  
DIGITAL AUTO CLOCK SETTING  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
Note for auto clock setting  
• The clock may set itself automatically after this unit  
receives the antenna/cable signal and plug in the  
power cord.  
1
2
3
4
[OK].  
• If the clock is not set correctly, timer recording does  
not work properly.  
• Analog off the air broadcasts have ended. Analog  
auto clock setting will no longer be available except  
via Cable TV. Try digital auto clock setting in this  
case.  
• For digital auto clock setting, incorrect time may be  
obtained depending on the broadcast information.  
If this occurs, set the “Auto Clock Setting“ to “OFF” at  
step 4 and try “Manual Clock Setting“ on page 34.  
“General Setting” menu will appear.  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
Use [K / L] to select “Auto Clock  
Setting”, then press [OK].  
Use [K / L] to select “Manual”, then  
press [OK].  
Time adjustment for each time zone  
Atlantic  
Eastern  
Central  
GMT (Greenwich Mean Time ) - 4 hours  
GMT (Greenwich Mean Time ) - 5 hours  
GMT (Greenwich Mean Time ) - 6 hours  
Auto Clock Setting  
OFF  
Auto  
Manual  
Mountain GMT (Greenwich Mean Time ) - 7 hours  
Enable Manual operation to select the DTV  
Channel for receiving the Clock Data and  
selecting your Time Zone below.  
Pacific  
Alaska  
Hawaii  
GMT (Greenwich Mean Time ) - 8 hours  
GMT (Greenwich Mean Time ) - 9 hours  
GMT (Greenwich Mean Time ) - 10 hours  
Press [{ ] to highlight “CH”. Press  
[K / L] to select “DTV”, then press  
5
[
B] .  
Set Channel No.  
DTV  
1
Use [the Number buttons] or [K / L]  
to enter the desired major channel  
number to receive the Clock Data,  
then press [OK].  
6
7
Use [K / L] to select the desired time  
zone, then press [OK].  
Time Zone  
Atlantic  
Eastern  
Central  
Mountain  
Pacific  
Alaska  
Hawaii  
Press [SETUP] to exit and turn the  
unit to the standby mode.  
This unit will search for the time only when the  
power is in the standby mode. Initially leave it in  
standby mode for at least 15 minutes to give this  
unit time to set the clock. Once the clock is set, the  
unit receives the clock data at 12:00 am & 12:00 pm  
when unit is in standby mode. Check the time after  
the Auto Clock was set, if it is incorrect time then set  
the “Auto Clock Setting“ to “OFF” in step 4 above.  
8
Then try “Manual Clock Setting“ on page 34.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 33  
SETTING THE CLOCK  
Manual Clock Setting  
Daylight Saving Time  
When “Daylight Saving Time” is “ON”, the unit clock will  
automatically adjust the time in order to fit the daylight  
saving time.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
“ON (MAR - NOV)” has been selected as the default.  
1
[OK].  
“General Setting” menu will appear.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
1
[OK].  
2
3
4
“General Setting” menu will appear.  
Use [K / L] to select “Clock Setting”,  
then press [OK].  
Use [K / L] to select “Clock”, then  
press [OK].  
“Clock” menu will appear.  
2
3
4
Use [K / L] to select calendar or time,  
then press [OK].  
Use [K / L] to select “Daylight Saving  
Time”, then press [OK].  
Clock Setting  
JAN / 01 / 2010 ( FRI )  
12 : 00 AM  
Use [K / L] to select “ON (MAR -  
NOV)”, “ON (APR - OCT)” or “OFF”,  
then press [OK].  
Use [{ / B] to select an item to set,  
and use [K / L] to select the contents  
to suit your preference, then press  
[OK] when you finish setting all the  
contents.  
Daylight Saving Time  
5
ON (MAR - NOV)  
ON (APR - OCT)  
OFF  
ON (MAR - NOV):  
Clock Setting  
Move forward one hour on the second Sunday in  
March and move back one hour on the first  
Sunday in November.  
JAN / 01 / 2010 ( FRI )  
12 : 00 AM  
ON (APR - OCT):  
Your setting will be activated.  
Move forward one hour on the first Sunday in  
April and move back one hour on the last  
Sunday in October.  
The clock start counting when you press [OK].  
Press [SETUP] to exit.  
Press [SETUP] to exit.  
6
5
Note  
• Your setting will be cancelled if you press [SETUP]  
before pressing [OK] at step 5.  
• Your clock setting will be lost if either there is a power  
failure or this unit has been unplugged for more than  
30 seconds when you set the clock manually.  
• For setting the day, year, hour, and minute,  
[the Number buttons] can also be used.  
• You can set the built-in calendar from the year 2009  
up to 2059.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 EN  
TUNER SETTINGS  
About digital TV broadcasting:  
Switching Analog Mode /  
With its high definition broadcast, digital broadcasting far  
surpasses analog broadcasting in both its picture and  
sound quality.  
Digital Mode  
You can easily switch the analog TV (NTSC) and digital TV  
(ATSC) with the remote control.  
What is the minor channel?  
By using high compression technology, digital  
broadcasting offers a service that enables multiple signals  
to send simultaneously.  
Therefore, you can select more than one program per  
major channel since digital broadcasting technology  
distinguishes between multiple channels broadcast by a  
single network.  
Press [DTV/TV] on the remote control.  
• The analog mode and digital mode switch alternately.  
Channel Selection  
[Air Time]  
Select channels by using [CHANNEL  
/
] or [the  
NTSC (analog mode)  
ATSC (digital mode)  
18:00  
18:30  
19:00  
19:30  
20:00  
Number buttons] found on remote control.  
smallest smallest  
CH4-1  
CH  
CH  
[CHANNEL  
/
]
Use [CHANNEL  
/
] to change the channel.  
CH4-1 CH4-2 CH4-3  
CH4  
[the Number buttons]  
Press the channel number with [the Number buttons] to  
select a channel you want to watch.  
smallest  
CH  
CH4-1  
CH4-3  
smallest  
CH  
<Analog TV Channels>  
CH4-1 CH4-2  
Enter the channel number with [the Number buttons] to  
select a channel you want to watch.  
For 1-digit number  
minor channel  
major channel  
e.g.) 2 ch:  
[0] + [2], [2] + [•] or  
: change automatically  
: change manually by using [CHANNEL  
[2] + leave it for 2 seconds.  
/
]
For 2-digit number  
e.g.) 12ch:  
[1] + [2]  
<Digital TV Channels>  
Enter the major and minor channel number with [the  
Number buttons] to select a channel you want to watch.  
For 1-digit number  
e.g.) 2.2 ch:  
major channel  
minor channel  
[0] + [2] or [2] + [•]  
[0] + [2], [2] + [•] or  
[2] + leave it for 2 seconds.  
For 2-digit number  
e.g.) 35.16ch:  
major channel  
minor channel  
[3] + [5]  
[1] + [6]  
• If you enter 1 digit for major channel and leave it for 2  
seconds, the number will be taken as the major channel  
and lowest minor channel of the major channel will be  
displayed.  
• If there is no minor channel input, lowest minor channel  
of the major channel will be displayed.  
Note  
• It may take up to 5 to 7 seconds to switch the digital  
TV channels.  
• In digital TV broadcasting, 2 or more channels, called  
minor channels, are simultaneously broadcast on one  
main channel, called major channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 35  
TUNER SETTINGS  
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be  
recorded.  
Selecting TV Audio  
Digital TV  
Press [AUDIO] to cycle through  
available audio languages.  
OPEN/  
English 1/2  
1
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
• When you press [AUDIO], selected language  
will be displayed on the TV screen.  
SETUP  
REPEAT  
HDMI  
TITLE  
• Every time you press [AUDIO], the language  
will be switched.  
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3  
DISC MENU  
• Available languages differ depending on the  
broadcast.  
• The language information display will  
automatically disappear.  
OK  
DISPLAY  
RETURN  
• When you record digital TV broadcasting, the  
audio language you have selected will be  
recorded.  
V.REPLAY  
V.SKIP  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Note  
• You cannot change the audio language for the  
recording of digital TV broadcasting.  
• Pressing [AUDIO] does not control external device  
audio.  
• When there is only one audio channel on the  
broadcast, pressing [AUDIO] does not display  
anything.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 EN  
TUNER SETTINGS  
Selecting TV Audio (cont’d)  
Analog TV  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
[OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
“General Setting” menu will appear.  
CHANNEL  
Use [K / L] to select “Channel”, then  
press [OK].  
“Channel” menu will appear.  
PQRS  
2
3
4
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “TV Audio  
Select”, then press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select “Stereo” or  
“SAP”, then press [OK].  
OK  
DISPLAY  
RETURN  
TV Audio Select  
Stereo  
SAP  
V.REPLAY  
V.SKIP  
Stereo:  
Outputs main-audio.  
SAP (secondary audio program):  
Outputs sub-audio.  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Press [SETUP] to exit.  
REC MODE  
5
Note on recording analog TV audio  
• When you record an analog TV program available in  
second audio or stereo, you have to select either  
“Stereo” or “SAP” in “General Setting” menu  
beforehand. Refer to the following table to check an  
appropriate setting.  
Selected  
audio  
Broadcast  
audio  
Disc  
Audio  
recording  
output  
Stereo  
STEREO+SAP  
STEREO  
STEREO  
STEREO  
MONO  
MONO  
SAP  
STEREO  
STEREO  
MONO  
MONO  
SAP  
MONO+SAP  
MONO  
SAP  
STEREO+SAP  
STEREO  
STEREO  
SAP  
STEREO  
SAP  
MONO+SAP  
MONO  
MONO  
MONO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 37  
TUNER SETTINGS  
DTV Closed Caption  
Digital TV  
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
[OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
“General Setting” menu will appear.  
CHANNEL  
Use [K / L] to select “Display”, then  
press [OK].  
PQRS  
2
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “DTV CC”, then  
press [OK].  
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
SETUP  
REPEAT  
HDMI  
TITLE  
3
DISC MENU  
CC Style  
V-Chip  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
Use [K /L] to select “Caption Service”,  
then press [OK].  
4
5
DTV CC  
Caption Service  
Recording  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Use [K / L] to the desired DTV closed  
caption, then press [OK].  
Caption Service  
REC MODE  
OFF  
Service1  
Service2  
Service3  
Service4  
Service5  
Service6  
OFF:  
Select if you do not want DTV CC. This is the  
default.  
Service 1 to Service 6:  
Select one of these before changing any other  
item in the closed caption menu. Choose  
“Service 1” under normal circumstances.  
Press [SETUP] to exit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 EN  
TUNER SETTINGS  
Closed Caption Style  
Digital TV  
Digital TV can also change the style of its closed caption such as font, color or size, etc.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
[OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
“General Setting” menu will appear.  
CHANNEL  
Use [K / L] to select “Display”, then  
press [OK].  
PQRS  
2
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “CC Style”, then  
press [OK].  
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
SETUP  
REPEAT  
HDMI  
TITLE  
3
DISC MENU  
CC Style  
V-Chip  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
Use [K / L] to select “User Setting”,  
then press [OK].  
4
5
CC Style  
User Setting  
Font Size  
Font Style  
Font Opacity  
Font Color  
Edge Type  
Edge Color  
Back Opacity  
Back Color  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Use [K / L] to select “ON”, then press  
[OK].  
User Setting  
ON  
OFF  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 39  
TUNER SETTINGS  
<Edge Type>  
Edge type of the displayed caption can be  
switched as below.  
Use [K / L] to select the item and  
switch the setting for each item you  
want to set, then press [OK].  
Edge Type  
6
None  
Raised  
Depressed  
Uniform  
L.Shadow  
R.Shadow  
• When “User Setting” is set to “ON”, you can set  
the following items. CC style set by “User  
Setting” will be displayed.  
• The setting description for each item is shown  
below.  
<Edge Color>  
Edge color of the displayed caption can be  
switched as below.  
<Font Size>  
Font size of the displayed caption can be  
switched as below.  
Edge Color  
Font Size  
White  
Black  
Red  
Green  
Blue  
Large  
Middle  
Small  
<Font Style>  
Font style of the displayed caption can be  
switched as below.  
Yellow  
Magenta  
Cyan  
Font Style  
<Back Opacity>  
Style1  
Style2  
Style3  
Style4  
Style5  
Style6  
Style7  
Style8  
Background opacity of the displayed caption can  
be switched as below.  
Back Opacity  
Solid  
Transparent  
Translucent  
Flash  
<Font Opacity>  
Font opacity of the displayed caption can be  
switched as below.  
<Back Color>  
Background color of the displayed caption can  
be switched as below.  
Font Opacity  
Back Color  
Solid  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Transparent  
Translucent  
Flash  
<Font Color>  
Font color of the displayed caption can be  
switched as below.  
Font Color  
White  
Black  
Red  
Press [SETUP] to exit.  
Green  
Blue  
Yellow  
Magenta  
Cyan  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 EN  
INFORMATION ON RECORDING  
Before you make a recording, read the following information.  
Recordable Discs  
Unrecordable Discs  
This unit can record to DVD+RW, DVD+R, DVD-RW and  
DVD-R.  
DVD+R/DVD-R can only be recorded to once. DVD+RW/  
DVD-RW can be recorded to and erased many times.  
DVD-RW/-R will be recorded in the DVD+VR mode  
automatically in this unit.  
• DVD-RW recorded in the mode other than +VR is not  
recordable on this unit unless you erase all contents in  
the disc (refer to page 97).  
• DVD-R recorded in the mode other than +VR is not  
recordable on this unit.  
Logos  
Attributes  
Maximum recordable numbers of title/chapters  
HDD :  
600 titles  
99 chapters per title  
8cm/12cm, single-sided,  
single layer disc  
Approx. max. recording time  
(SLP mode):  
DVD :  
49 titles per disc  
254 chapters per disc  
99 chapters per title  
DVD+RW  
DVD+R  
360 minutes (4.7GB) (for 12cm)  
108 minutes (1.4GB) (for 8cm)  
DVD-RW  
DVD-R  
• Following discs are recommended for good recording  
quality and are proven to be compatible with this unit.  
However, depending on the media condition the unit  
may not read the disc properly.  
Verbatim  
DVD+R 8x,  
DVD-R 8x,  
DVD-RW 4x  
DVD+RW 4x,  
DVD-RW 2x  
JVC  
Maxell  
SONY  
TDK  
DVD+R 4x/8x/16x, DVD-R 8x/16x  
DVD+R 4x/8x/16x, DVD+RW 4x  
DVD+R 4x/8x/16x  
Performance of any other discs are not guaranteed.  
• You can play back DVD+RW on most DVD players  
without finalizing. However, if you have added or  
deleted chapters, or made chapters hidden, you  
must perform “Make Edits Compatible” before being  
able to see those effects on other units. (Refer to  
page 98 for more details.) To play back discs other  
than DVD+RW on other DVD players, you will need  
to finalize.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 41  
INFORMATION ON RECORDING  
Recording Mode  
About HDD  
You can select a recording mode among 6 options, and  
the recording time will depend on the recording mode  
you select as follows.  
HDD is a special device which has high recording density  
and is suited for long-time recording or high-speed  
cueing but by contrast, has many factors which can cause  
breakage. Use HDD on the premise that you should dub  
the recorded programs to a DVD to protect your precious  
videos.  
Recording Recording  
mode time  
Video/sound  
quality  
Disc size  
8cm Disc  
(good)  
HQ  
18 min  
HDD is a temporary storage location:  
SP  
SPP  
LP  
36 min  
45 min  
54 min  
72 min  
108 min  
60 min  
120 min  
150 min  
180 min  
240 min  
360 min  
64 hrs  
HDD is not a permanent storage location of the recorded  
contents. Be sure to use it as a temporary storage location  
until you watch the programs once, edit them, or dub  
them to a DVD.  
Be sure to dub (back up) data promptly if you find  
abnormalities in HDD:  
If there is mechanical trouble with the HDD, grinding or  
other sounds may be heard or blocky noise may appear  
on the image. If you continue to use as it is, deterioration  
may continue and eventually the HDD may not be used  
at all. If you notice these symptoms of a failing HDD,  
promptly dub the data to a DVD. When an HDD fails,  
recovery of recorded content (data) may be impossible.  
EP  
(poor)  
(good)  
SLP  
HQ  
SP  
SPP  
LP  
12cm Disc  
EP  
(poor)  
(good)  
SLP  
HQ  
SP  
129 hrs  
161 hrs  
193 hrs  
258 hrs  
387 hrs  
About the remaining capacity of HDD recording time:  
SPP  
LP  
The on-screen indication of the possible recording time  
left on HDD/DVD may differ from the actual recordable  
time as this unit employs the variable bit rate encoding  
system which varies the recording (storage) amount of  
data in conformity with the amount of information on the  
video.  
Before recording to the HDD, ensure there is sufficient  
space on the HDD by deleting unnecessary titles in  
advance.  
HDD  
(Internal)  
EP  
(poor)  
SLP  
• The recording time is only an estimate. The actual  
recording time may differ.  
• The audio and video quality gets poorer as the recording  
time becomes longer.  
• Each time [REC MODE] is pressed, recording mode and  
its allowed recording time will be displayed.  
Note  
• This unit cannot record to CD-RW or CD-R.  
• All high definition pictures will be down converted to  
the standard definition pictures when they are  
recorded on this unit.  
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on  
a personal computer or a DVD or CD recorder may  
not be played back if the disc is damaged or dirty or  
if there is condensation on the player’s lens.  
• If you record a disc using a personal computer, even  
if it is recorded in a compatible format it may not be  
played back because of the settings of the  
application software used to create the disc. (Check  
with the software publisher for more detailed  
information.)  
• Since the recording is made by the VBR (variable bit  
rate) method, depending on the picture you are  
recording, the actual remaining time for recording  
may be a little shorter than the remaining time  
displayed on the TV screen.  
• You cannot record copy-protected program using  
this unit. (Copy-protected signal is included in DVD-  
video or some satellite broadcasts.)  
• You cannot record “copy-once only” program on  
DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 EN  
BEFORE RECORDING  
Make Recording Compatible  
Recording the DTV Closed Caption  
You can record the DTV Closed Caption as the part of the  
image for the recording program and see the recorded  
closed caption even with the TV that is not closed caption  
compliant.  
Use this feature to make the unfinalized +VR mode discs  
recorded on other unit recordable on this unit. When you  
make an additional recording on this unit with “Make  
Recording Compatible” set to “ON”, the title menu is  
automatically converted to our style.  
1) Press [SETUP] and use [K / L] to select “General  
Setting”, then press [OK].  
1) Press [SETUP] and use [K / L] to select “General  
2) Use [K / L] to select “Display”, then press [OK].  
Setting”, then press [OK].  
3) Use [K /L] to select “DTV CC”, then press [OK].  
“General Setting” menu will appear.  
2) Use [K / L] to select “Recording”, then press [OK].  
“Recording” menu will appear.  
3) Use [K / L] to select “Make Recording Compatible”,  
then press [OK].  
4) Use [K /L] to select “Recording”, then press [OK].  
• If “Caption Service” is set to “OFF”, you cannot select  
“Recording”.  
5) Use [K / L] to select “ON”, then press [OK].  
4) Use [K / L] to select “ON” or “OFF”, then press [OK].  
Recording  
Make Recording Compatible  
ON  
OFF  
ON  
OFF  
6) Press [SETUP] to exit.  
ON:  
Title list will be replaced when you make  
additional recordings to the discs recorded by  
other units.  
Note  
OFF: Prohibiting additional record to the disc that  
• If “Caption Service” is set to “OFF”, the caption will  
not be recorded.  
has a title list created by other units.  
5) Press [SETUP] to exit.  
Setting for Auto Chapter  
You can set a specified time for chapter marks.  
1) Press [SETUP] and use [K / L] to select “General  
Setting”, then press [OK].  
“General Setting” menu will appear.  
2) Use [K / L] to select “Recording”, then press [OK].  
“Recording” menu will appear.  
3) Use [K /L] to select “Auto Chapter”, then press [OK].  
4) Use [K / L] to select a desired time option, then  
press [OK].  
Auto Chapter  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
60 minutes  
5) Press [SETUP] to exit.  
Note  
• The interval for auto chapter may be up to two  
minutes different from the time option you set.  
• A blank chapter may be created depending on the  
remaining time of the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 43  
BASIC RECORDING & ONE-TOUCH TIMER RECORDING  
Follow the steps to record TV programs.  
If you are recording to the HDD, press [HDD] first, then  
proceed to step 2.  
If you are recording to a disc, press [DVD] first.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Insert a recordable disc (refer to page  
27 on how to insert a disc).  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
1
CHANNEL  
PQRS  
Align the disc to  
the disc tray guide.  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
* Make sure the disc is compatible with this unit.  
(Refer to page 41 for the list of compatible discs.)  
DISC MENU  
It may take a while to load  
the disc.  
OK  
• When inserting a brand-new DVD+RW/DVD-  
RW, the unit automatically starts to format.  
(Except when HDD is recording, or when there  
is a timer program which starts in 15 minutes.)  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
• If titles have been recorded on the disc, the  
title list is displayed. Press [STOP C] to exit the  
title list.  
RAPID PLAY  
Press [REC MODE] repeatedly to  
select a recording mode.  
Refer to “Recording Mode” on page 42.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
2
3
DVDꢀSP(2Hr)  
0h58m  
Select the appropriate external input  
channel by pressing [SOURCE] or  
[CHANNEL  
Press [DTV/TV] to select analog TV or  
digital TV, then use [CHANNEL  
/
].  
/
]
or [the Number buttons] and [ • ] (for  
digital TV channels) to select a  
desired channel to record.  
Refer to “Switching Analog Mode/Digital Mode”  
and “Channel Selection“ on page 35.  
CH 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 EN  
BASIC RECORDING & ONE-TOUCH TIMER RECORDING  
Press [REC] to start recording.  
“I HDD” or “I DVD” will be displayed for 4 seconds.  
e.g.) DVD  
Press [STOP C] to stop recording.  
As for DVD recording, the title list will appear  
automatically after writing to a disc complete.  
(Refer to “Guide to a Title List” on page 81.)  
4
5
e.g.) DVD+R  
I
DVD  
SP(2Hr)  
2h00m  
Press [PAUSE F] to pause recording.  
Press [PAUSE F]] or [REC] again to restart  
recording.  
To set one-touch timer recording (OTR)...  
This is a simple way to set the recording time in blocks  
of 30 minutes.  
Please finalize the disc when the writing is  
completed before playing back on other DVD  
players.  
Writing to Disc  
90%  
Press [REC] repeatedly until the desired recording time  
(30 minutes to 6 hours) appears on the TV screen.  
One-touch timer recording will start.  
1
SP(2Hr)  
I
0h30m  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
0h30m  
1h00m  
(normal recording)  
6h00m  
EMPTY TITLE  
1:41:17 SP (2Hr)  
5h30m  
To change the recording length during the one-  
touch timer recording:  
Press [REC] repeatedly until the desired length appear.  
To cancel the one-touch timer recording within the  
specified time:  
• Press [STOP C] to exit the title list.  
Press [STOP C].  
When the recording is completed, the unit will ask  
you whether to turn the unit to the standby mode  
except under conditions listed below.  
- If a timer recording is programmed to start in 5 minutes.  
- During playback of HDD or DVD.  
- While displaying menus or information on the screen.  
• The unit will be turned to the standby mode automatically if  
you select “Yes” or if you do not reply in 1 minute.  
Note  
• When you press [REC], recording starts immediately and continues until the HDD or disc is full, record 12 hours to  
HDD or you stop recording.  
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.  
• When the unit clock has not been set, the space for a date and time of title names will be blank.  
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel  
audio will be recorded. Refer to “Selecting TV Audio” on pages 36-37 for more details.  
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.  
• You cannot change the recording mode during the recording pause mode.  
• You can change a channel to be recorded during the recording pause mode.  
• You can play back a title on one component while making a recording on other. To do so, simply select the  
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD/DVD  
recording. And then follow the normal playback procedure.  
• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]  
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.  
Note for one-touch timer recording  
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press  
[DISPLAY] to see it on the TV screen.  
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.  
- Turning the power to the standby mode to stop one-touch timer recording.  
- Using [REC] or [STOP C] on the remote control.  
• You cannot use the pause function during one-touch timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 45  
AUTOSTART RECORDING  
The autostart recording will be stopped, cleared in  
following cases:  
Every time you turn on this unit, this unit automatically  
records the channel currently viewed and temporarily  
stores the recorded content to the HDD (Autostart  
recording). By using this function, you can pause or go  
back the TV program you are currently watching, and you  
can also start recording the whole TV program even at  
the middle of the TV program. The temporary recording  
can be made up to 6 hours of time range. If the recording  
exceeds 6 hours, earliest recording will be overwritten.  
- Turning the power to the standby mode  
- Start recording  
- Editing titles or goes into editing menu  
- Deleting titles (DVD only)  
- Start dubbing  
- Changing input channels  
- Using any functions in “Disc Edit” or “HDD Menu”  
- Selecting following menus:  
“General Setting” ➔ “Display” ➔ “V-Chip” ➔ “Downloadable Rating”  
“General Setting” ➔ “Channel” ➔ “Auto Channel Preset”  
“General Setting” ➔ “Channel” ➔ “Manual Channel Preset”  
• The autostart recording will automatically resume for  
new recording  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
For how to playback the autostart recording, refer to  
“Playing Back the Autostart Recording” on page 76.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Recording the Contents of the Autostart Recording  
PQRS  
When watching TV program through  
this unit’s tuner, use [H], [E] or  
[V.REPLAY] to locate your desired  
point to start recording.  
• The autostart recording information will  
appear. Refer to page 23.  
SPACE  
AUDIO  
CLEAR  
1
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
2:59:44 / 3:31:31  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
7:10AM  
10:42AM  
10:10AM  
RAPID PLAY  
Press [REC] to start recording.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
100/100  
1/  
1
0:00:34 / 0:32:34  
2
3
REC MODE  
I
HDD  
HDD SP  
1h53m  
From the selected point, the contents of the  
autostart recording become a recording title in  
the HDD while the unit continues to record the  
current content of the channel.  
Note  
• In the autostart recording, when you display the DTV  
program information, the information will be  
recorded as the part of the picture.  
Press [STOP C] twice to stop  
• If there is not enough recordable space on HDD to  
record from the selected point to current point, you  
cannot record the content of autostart recording.  
• When you record the content of the autostart  
recording, the recording mode will be SP.  
• When you are recording the contents of the autostart  
recording, if you record the part that is copy-protected,  
“Copy guard detected.” appears and you are not able to  
watch the part.  
recording.  
The recording stops and new autostart recording  
begins.  
• If you press [STOP C] once, the image on the  
TV screen goes back to current content of the  
channel while the recording continues.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 EN  
TIMER RECORDING  
You can program the unit to record up to 36 programs  
within a month in advance. Daily or weekly program  
recordings are also available.  
Before recording, make sure  
• Set the clock before setting a timer programming.  
Guide to Timer Programming Display  
3
1
2
Timer Programming  
FEB/05/10 10:30 AM 69.1 SP  
SP (1:00)  
THU FEB/04 11:30AM  
• If you are recording to a disc, insert a recordable disc  
with enough recordable space.  
Date  
FEB/05  
Start  
End  
CH  
10:30AM 11:30AM DTV69. 1  
New Program  
6
1/1  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
4
5
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
1 Title of a timer program (Contains date, time, channel,  
recording mode of the program)  
2 Current date and time  
3 Recording mode, and length of the recording  
4 Timer program list  
CHANNEL  
PQRS  
5 Total number of pages and current page (6 pages  
SPACE  
AUDIO  
CLEAR  
maximum)  
6 Recording media (“ ” (HDD) or “ ” (DVD))  
SETUP  
REPEAT  
HDMI  
TITLE  
Press [TIMER].  
DISC MENU  
1
OK  
DISPLAY  
RETURN  
Use [K / L] to select “New Program”,  
then press [OK].  
V.REPLAY  
V.SKIP  
2
Timer Programming  
THU FEB/04 11:30AM  
Date  
Start  
End  
CH  
New Program  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
1/1  
• If there are 6 or more programs, use  
[H / G] to change pages.  
Use [K / L] to enter the date, then  
press [B].  
3
Date  
FEB/05  
CH  
Start  
- - : - -  
REC To  
HDD  
End  
- - : - -  
Mode  
SP  
DTV69. 1  
SP  
2h00m  
JAN/01  
Daily  
When pressing [L] at  
the current date, the  
date will change as  
follows.  
MON-SAT  
MON-FRI  
SAT  
Note  
• If you have not set the clock yet:  
e.g.) January 1st  
Entry screen for the clock setting will appear instead  
of the timer programming list at step 1. Continue  
with the step 5 in “Manual Clock Setting” on page 34  
before setting a timer programming.  
FRI  
• Use [s / B] to move the cursor to the left and the  
right in the entry screen for the timer programming.  
SUN  
• You cannot make a program whose recording time  
exceeds 12 hours.  
JAN/31  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 47  
TIMER RECORDING  
Use [K / L / s / B] or [the Number  
Use [K /L] to select a recording mode.  
buttons] to enter the start and end  
time, then press [B].  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
DVD  
End  
11 : 30AM  
Mode  
4
5
7
DTV69. 1  
SP  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
HDD  
End  
- - : - -  
Mode  
SP  
SP  
1h00m  
Refer to “Recording Mode” on page 42.  
• You can check the remaining recordable space  
of the disc when you select the recording mode.  
DTV69. 1  
SP  
2h00m  
• You cannot make a program whose recording  
time exceeds 12 hours.  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
DVD  
End  
11 : 30AM  
Mode  
DTV69. 1  
SP  
Use [K / L / s / B] to select analog  
(“- - -”) / digital (“DTV”) mode or  
external input (L1 / L2), then press  
[B].  
SP  
1h00m  
Auto recording mode select...  
When “Auto” is selected as a recording mode, the unit  
calculates how much time is available on the disc and  
selects the best recording mode available  
e.g.) external input mode  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
HDD  
End  
11 : 30AM  
Mode  
automatically to complete recording the program.  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
DVD  
End  
11 : 30AM  
Mode  
L1  
SP  
SP  
1h00m  
DTV69. 1  
Auto  
To record from external input (e.g., cable/  
satellite box), select L1 or L2.  
Use [K / L] or [the Number buttons] to select  
the channel number to record, then press [B].  
Auto  
1h00m  
• “Auto” is only available for one program in the timer  
program list.  
For digital mode, select both major and minor  
channels. Refer to “How to select a channel  
number for the timer recording” on page 49  
for more details.  
Alternate recording (DVD only)...  
In the following cases, the unit will detect it and  
automatically record to the HDD even when DVD is  
selected as the recording media.  
- If there is no recordable disc in the unit  
- If the disc does not have enough space to complete the  
recording  
e.g.) analog mode  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
HDD  
End  
11 : 30AM  
Mode  
10  
SP  
- If the material is “copy-once” program and prohibited to  
be recorded on a DVD  
- If the disc is not available because the repairing process is  
cancelled halfway  
This feature is available only for timer recording. Not  
available for one-touch timer recording.  
SP  
1h00m  
e.g.) digital mode  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
HDD  
End  
11 : 30AM  
Mode  
DTV69. 1  
SP  
SP  
1h00m  
Press [OK] when all items are  
entered.  
Use [K / L] to select the recording  
media (“HDD” or “DVD”), then press  
[B].  
will appear on the front panel display.  
8
Timer Programming  
6
FEB/05/10 10:30 AM 69.01 SP  
e.g.) recording to DVD  
SP (1:00)  
Date  
FEB/05  
THU FEB/04 11:30AM  
Start  
End CH  
10:30AM 11:30AM DTV69. 1  
New Program  
Date  
FEB/05  
CH  
Start  
10 : 30AM  
REC To  
DVD  
End  
11 : 30AM  
Mode  
DTV69. 1  
SP  
SP  
1h00m  
1/1  
Your program setting is now stored.  
• To set another program, repeat steps 2 to 8.  
• To exit, press [TIMER] or [SETUP].  
• When 2 or more programs are overlapped,  
“Timer program overlapped” appears, and the  
overlapped program will be displayed in blue.  
• To correct the timer program refer to  
“Checking, canceling, or correcting the timer  
programming information” on page 49.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 EN  
TIMER RECORDING  
How to select a channel number for the timer recording  
Analog TV  
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),  
the channel will be decided as soon as you enter the channel number.  
Analog CATV  
Digital TV  
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-  
125), the channel will be decided as soon as you enter the channel number.  
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),  
the channel will be decided as soon as you enter the channel number.  
Digital CATV  
minor channels  
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-  
135), the channel will be decided as soon as you enter the channel number.  
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),  
the channel will be decided as soon as you enter the channel number.  
<Hint>  
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.  
e.g.) “5”: [0]+[5]  
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.  
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.  
[K / L] does not skip the non-existed minor channels.  
To stop the timer recording in progress  
If the timer program did not complete correctly,  
the error number appears in the timer  
programming list.  
1) Press [STOP C] on the remote control.  
2) Confirmation message will appear. Select “Yes”, then  
press [OK].  
• To stop the timer recording immediately, press  
[C STOP ] on the unit.  
Timer Programming  
FRI FEB/05 1:00PM  
Date  
E41 FEB/05  
Start  
End  
CH  
Checking, canceling, or correcting the timer  
programming information  
10:30AM 11:30AM DTV69. 1  
New Program  
1) Press [TIMER].  
2) Check the information.  
Each error number means:  
E1-22 Recording error other E44  
E37-39 than below  
Timer Programming  
Already 254 chapters  
recorded  
FEB/05/10 10:30 AM 69.1 SP  
SP (1:00)  
Date  
FEB/05  
THU FEB/04 11:30AM  
End CH  
E24  
Unrecordable disc  
E45  
Copy prohibited  
program  
Start  
10:30AM 11:30AM DTV69. 1  
New Program  
E25-26 Copy prohibited  
program  
E46  
It is impossible to  
record additionally  
on a disc recorded  
by other units  
E29  
E30  
E35  
E36  
Disc protected  
Disc full  
3-A) To delete the timer program:  
when setting “  
1 Use [K / L] to select the program you want to  
delete, then press [OK].  
2 Use [K / L] to select “Delete”, then press [OK].  
Confirmation window will appear.  
3 Use [K / L] to select “Yes”, then press [OK].  
PCA full *1  
Make Recording  
Compatible” to “OFF”.  
Already finalized  
video format disc  
E47  
E49  
Already 600 titles  
recorded on the HDD  
E40  
Some portion has  
not been recorded  
because of program  
overlapping.  
Recording did not  
start at the start time.  
There was no disc  
space on the HDD  
at the starting time  
for the HDD timer  
recording.  
3-B) To correct the timer program:  
1 Use [K / L] to select the program you want to  
correct, then press [OK].  
2 Use [K / L] to select “Program Change”, then  
press [OK].  
3 Correct the timer program by using  
[K /L /{ /B], then press [OK].  
E41  
E42  
Power failed  
E50  
HDD recording is  
cancelled due to the  
insufficiency of the  
disc space on the  
HDD.  
No disc when  
recording  
E43  
Already 49 titles  
recorded  
4) Press [TIMER] to exit.  
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.  
• A program with the error number is grayed in the timer  
programming list.  
• Timer program with an error number will be cleared  
once the entry screen for the program is displayed.  
*1 PCA is a disc's space reserved for recording test.  
Note  
• Press [TIMER] to check the timer recording in progress.  
• As to the timer recording in progress (which is shown in red  
in the timer program list), you only can edit the end time.  
The changes made during recording will be recognized as  
only specific to that recording in progress and it will not  
affect the daily or the weekly recording setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 49  
TIMER RECORDING  
Hints for Timer Recording  
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer  
programming will be lost.  
• When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to  
page 48).  
• When a timer recording is completed, the unit will ask you whether to turn the unit to the standby mode if there is no  
timer recording which starts within 5 minutes, except under conditions listed below.  
- During playback of HDD or DVD.  
- While displaying menus or information on the screen.  
• The unit will be turned to the standby mode automatically if you select “Yes” or if you do not reply in 1 minute.  
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted  
and be cleared for redoing.  
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you  
press [OK] at step 8 on page 48.  
• You cannot change the audio language for the timer recording of digital TV broadcasting.  
• Timer recording whose recording time exceeds 12 hours cannot be made.  
• It is prohibited to turn the unit to the standby mode from 4 minutes before the programmed starting time.  
• It is prohibited to change channel from 15 seconds before the programmed starting time.  
• [REC] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the  
starting time during regular or one-touch timer recording, the recording in progress will be stopped.  
• Playback of DVD/CD is prohibited from 2 minutes before the programmed starting time when the recording media is  
DVD. If it comes to 2 minutes before the programmed starting time during DVD playback, the playback will be  
stopped.  
The Priority of Overlapped Settings  
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over  
the programs with the later start time when timer programs overlap.  
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.  
• When 2 or more timer programs have the same start time, the program set first will be given priority.  
• A timer recording of lower priority will be cancelled or start from the middle.  
• Check the overlapped timer programmings and change the priority if necessary.  
When the starting time is the same:  
A program set previously (PROG. A) has priority.  
PROG. A  
PROG. B  
actual  
recording  
PROG. A
PROG. B  
The first 2 minutes (at the longest) will be cut off.  
Note for DVD recording  
When the end time of the programming  
currently being recorded and the start time  
of the subsequent program are same:  
The beginning of the PROG. B may be cut off.  
• When the recording time of 2 programs are overlapped, or  
the end time of a program and the start time of another  
program is the same, the first 2 minutes (at the longest) of  
the subsequent program will be cut off.  
• If the cut-off portion comes up to 3 minute or more, this  
program will be displayed with error number E40 in the  
timer programming list.  
PROG. A  
PROG. B  
actual  
recording  
PROG. A  
PROG. B  
The first 2 minutes (at the longest) will be cut off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 EN  
SPECIAL RECORDING  
Overwriting from the Beginning of  
the Title  
Overwriting in the Middle of the Title  
You can overwrite the existing title from the selected  
position.  
You can overwrite the existing title from the beginning.  
1) Press [STANDBY-ON y].  
Make sure that the TV input is set on the unit.  
1) Follow the steps 1, 2 and 4 on the left.  
2) Use [K / L] to select “Play”, then press [OK].  
2) Load the disc that includes a title to be overwritten.  
Playback will start.  
It takes a while to display  
the title list.  
3) Press [PAUSE F] at the point from which you want  
to start overwriting.  
Title list will appear.  
If the title list does not appear, press [TITLE].  
4) Press [REC].  
“F I DVD”, display menu, channel, and the time lapse  
will be displayed as illustrated on the left.  
3) Press [REC MODE] repeatedly to select a recording  
mode.  
Refer to “Recording Mode” on page 42.  
4) Use [K / L] to select a title to be overwritten, then  
press [OK].  
5) Select the channel you want to record.  
(Refer to page 29 on how to select a channel.)  
1
SP(2Hr)  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
6) Press [REC] again.  
Overwriting recording starts.  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
7) Press [STOP C] to stop recording.  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
This operation may take a  
while to be completed.  
5) Use [K / L] to select “Overwrite”, then press [OK].  
Note  
• Recording mode of the overwriting title is the same  
as that of the original (overwritten) title when  
overwriting in the middle of the title.  
1
SP(2Hr)  
Play  
Edit  
Overwrite  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
• Title name will not be overwritten.  
6) Select the channel you want to record.  
(Refer to page 29 on how to select a channel.)  
e.g.) DVD+RW  
selected title number  
to be overwritten  
1
1
0:00:00  
+RW  
CH 12  
DVD SP(2Hr)  
2h00m  
DVD  
F
I
7) Press [REC].  
Overwriting recording starts.  
The elapsed-time counter starts running.  
8) Press [STOP C] to stop recording.  
Title name is also overwritten.  
This operation may take a  
while to be completed.  
Note  
• The remaining recording time is displayed on the  
bottom right corner of the TV screen during  
overwriting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 51  
SPECIAL RECORDING  
Hints for Overwriting  
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that  
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion  
please check if there is no important title after the overwriting point.  
When overwriting title is shorter than the existing title:  
(overwriting from the beginning of the title)  
overwrite  
30 - 180 seconds will be cut off.  
recording : A  
after  
overwriting  
existing title : B  
title name : B  
title name : A  
When overwriting title is longer than the existing title:  
(overwriting from the beginning of the title)  
overwrite  
recording : A  
after  
overwriting  
existing title : B  
title name : A  
overwrite  
recording : A  
30 - 180 seconds will be cut off.  
after  
overwriting  
existing title : B  
existing title : C  
title name : A  
title name : C  
When overwriting in the middle of the title:  
overwrite  
30 - 180 seconds will be cut off.  
recording : A  
after  
overwriting  
existing title : B  
title name : B*  
title name : B  
Overwritten section and the rest of the sections will  
have the same title name as the original existing  
title (B).  
*
Note  
• When a title name is overwritten, its index picture is also overwritten.  
• “Auto Chapter” interval time is reset at the overwriting start point.  
• A chapter mark is put at the beginning of the overwrite title when overwriting in the middle of the title.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 EN  
DUBBING  
Information on Dubbing  
You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to pages 41-43 to see the  
recording compatibility.  
Guide to Dubbing Menu Display  
Recording Mode for Dubbing  
“High”  
This unit is compatible with the high speed dubbing from  
HDD to DVD.  
If you dub a title recorded in SLP mode to DVD+R/-R,  
dubbing speed will be 24 times at the maximum. To  
perform the high speed dubbing, set the recording mode  
to “High”.  
• Duration of high speed dubbing will vary depending on  
the recording mode or the title amount.  
• High speed dubbing is not available when;  
- recording mode is set to other than “High”.  
- dubbing from a DVD to the HDD.  
- there is not enough space in the HDD.  
- duration of the title is more than 5 hours.  
• During dubbing (except for high speed dubbing), you can  
use [C STOP] on the front panel or press [STOP C] for 2  
seconds on the remote control, and any other buttons will  
be invalid.  
HDD  
DVD  
1
2
ABCDE  
HQ (1Hr) (0:30:00) JAN/ 4/2010  
Dubbing List  
1.ABCDE  
3000 MB  
4
5
6
Add  
2.JAN/ 4/10 1:00AM CH22  
3.JAN/ 7/10 11:00AM CH96  
Delete All  
Dubbing Start  
3
1/1  
1 Dubbing direction  
2 Selected title information  
3 Dubbing menu  
4 Remaining recordable space  
5 Dubbing list  
6 Current page number/total number of pages  
“Auto”  
When “Auto” is selected as a recording mode, the unit  
calculates how much time is available on the disc and  
selects the best recording mode available automatically.  
• The recording may be cut short when the available  
recording space of the disc is too limited.  
Note on dubbing  
• During normal dubbing, you can watch the playback  
picture of the title being dubbed (the audio cannot  
be changed). During high speed dubbing, however,  
the playback picture will not appear.  
• Dubbing of a “copy-once only” program is not  
possible with this unit.  
• If you stop the dubbing halfway, the contents will be  
dubbed up to the point where you stop the dubbing  
(except for the high speed dubbing). With high  
speed dubbing, nothing will be dubbed if you stop it  
halfway.  
• To stop the dubbing in progress, press [C STOP] on  
the front panel or press [STOP C] for 2 seconds on  
the remote control.  
Other modes  
Refer to page 42 for the information on other modes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 53  
DUBBING  
Settings for an External Device  
Connect the external device properly to the unit by using input jacks either L2 and L3 (Front) or L1 (Rear).  
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).  
Use S-video or the RCA audio/video cables for this connection.  
When connecting a DVC (digital video camcorder), use DV-IN jack of L3 (Front).  
or  
S-VIDEO  
OUT  
VIDEO  
OUT  
AUDIO OUT  
DV-OUT  
VIDEO  
OUT  
AUDIO OUT  
S-VIDEO  
OUT  
L
R
R
L
external device  
(camcorder, VCR etc.)  
S-video  
cable  
RCA  
RCA  
DV cable  
(4-pin)  
RCA  
RCA  
or  
S-video  
cable  
video  
cable  
audio  
cable  
video  
cable  
audio  
cable  
or  
VIDEO EO  
IN  
UT  
Y
P
B/CB  
L
L
or  
R
R
PR/CR  
IN  
OUT  
AUDIO IN  
L1  
COMPONENT  
VIDEO OUT  
S-VIDEO AUDIO OUT  
S-VIDEO  
L2  
L3  
L1  
to L2 & L3 IN  
to L1 IN  
VIDEO VIDEO  
IN OUT  
Y
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
(L1)  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
front of this unit  
rear of this unit  
Supplied cables used in this connection are as follows:  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your  
local store.  
1
2
3
4
[OK].  
“General Setting” menu will appear.  
Use [K / L] to select “Video”, then  
press [OK].  
Submenu will appear.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L] to select “Video Input”,  
then press [OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [K / L] to select desired external  
input, then press [OK].  
PQRS  
SPACE  
AUDIO  
CLEAR  
Video Input  
L1 (Rear)  
L2 (Front)  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select the input jack  
type to connect, then press [OK].  
If you want to use VIDEO IN jack, select “Video In”.  
If you want to use S-VIDEO IN jack, select  
“S-Video In”.  
OK  
5
DISPLAY  
RETURN  
L1 (Rear)  
V.REPLAY  
V.SKIP  
Video In  
S-Video In  
Press [SETUP] to exit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 EN  
DUBBING  
Recording from an External Device  
Before recording from an external device, refer to the  
instructions for the connection on page 54.  
If you are recording to the HDD, press [HDD] first, then  
proceed to step 2.  
If you are recording to a disc, press [DVD] first.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Insert a recordable disc (refer to page  
27 on how to insert a disc).  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
1
2
It takes a while to load the disc.  
CHANNEL  
Select the appropriate external input  
channel (L1, L2 or L3) by pressing  
PQRS  
SPACE  
AUDIO  
CLEAR  
[SOURCE] or [CHANNEL  
/
].  
• If the external device is connected to the rear  
of this unit, select L1.  
SETUP  
REPEAT  
HDMI  
TITLE  
• If the external device is connected to the front  
of this unit, select L2 or L3.  
• If you are connecting the digital video  
camcorder to the DV-IN jack of this unit, refer  
to pages 55-58.  
DISC MENU  
OK  
• You can also select L1 or L2 channel by using  
[the Number buttons].  
e.g.) For L1, press [0], [0], [1].  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
Press [REC MODE] repeatedly to  
select a recording mode.  
RAPID PLAY  
Refer to “Recording Mode” on page 42.  
3
4
5
6
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Press [I RECORD] on the unit to start  
recording.  
REC MODE  
Start playback on the external device  
to record from.  
Press [C STOP] on the unit to stop  
recording.  
This operation may take a  
while to be completed.  
1 1 6 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 55  
DUBBING  
Information on DV Dubbing  
Guide to DV and On-Screen Display  
This function helps you to easily dub the contents of the DVC (digital video camcorder) to HDD or DVD.  
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or  
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is  
compliance with the IEEE1394 standards. When you connect to DV-IN jack on the front of this unit, select “L3(DV-IN)”  
position by using [SOURCE] or [CHANNEL  
information for the operation of your DVC.  
/
] on the remote control and press [DISPLAY] to show the DV dubbing  
When the DVC is  
in video mode...  
When the DVC is not  
in camera mode...  
1
1/  
1
1/  
1
1/  
1
1/  
1
+RW  
+RW  
The menu changes according to  
what mode of DVC.  
Switch the mode on the DVC to  
playback mode for the dubbing  
information.  
Control  
DV Audio  
Start Rec  
DVD  
Stereo1  
L3 (DV-IN)  
AB-1234  
0:12:34  
L3 (DV-IN)  
AB-1234  
0:12:34  
5
2
DVD SP(2Hr)  
1h00m  
DVD SP(2Hr)  
1h00m  
3
4
7
6
The following instructions are described with the operations using the remote control of this unit.  
1. DV icon  
6. Product name of your DVC  
2. Indicator of active device  
• If the unit cannot recognize the  
input signal from the DVC or the  
unknown product, “No Device” or  
“****” will appear instead.  
7. Status of the current operation  
and the time counter  
• When “Control” is highlighted,  
press [OK] to display the item  
selection. Use [K / L] to select the  
device you wish to operate, then  
press [OK] to activate.  
• Select “HDD”/“DVD” to control  
this unit.  
Each icon means (Available icons  
may vary depending on the DVC):  
• Select “DV Input” to control your  
DVC.  
3. Recording audio mode  
• Other than the DVC is in stop  
mode, “DV Audio” can be  
selected. Press [OK] to display the  
item selection and then use  
[K / L] to select the audio you  
wish to output. Press [OK] again  
to activate.  
• Select “Stereo1” to dub the stereo  
sound.  
• Select “Stereo2” to dub the sound  
with after recording sound.  
• Select “Mix” to dub the stereo1  
and stereo2.  
4. Indicator of dubbing function  
DVC is in stop mode.  
DVC is in playback mode.  
DVC is in pause mode.  
DVC is fast forwarding.  
(in stop mode)  
DVC is fast reversing.  
(in stop mode)  
DVC is fast reversing.  
(standard speed)  
DVC is fast reversing.  
(faster than above)  
DVC is fast reversing.  
(faster than above)  
DVC is in slow reverse  
playback.  
DVC is fast forwarding.  
(standard speed)  
DVC is fast forwarding.  
(faster than above)  
DVC is fast forwarding.  
(faster than above)  
DVC is slow forwarding.  
(standard speed)  
DVC is slow forwarding.  
(faster than above)  
DVC is slow forwarding.  
(faster than above)  
DVC is in recording.  
DVC is in recording pause  
mode.  
• When the unit is ready for  
dubbing, “Start Rec” will appear.  
• When the unit is in dubbing,  
“Pause Rec” will appear.  
5. Channel position  
• When you select “L3(DV-IN)” by  
using [SOURCE] or  
[CHANNEL  
will appear.  
/
], “L3(DV-IN)”  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 EN  
DUBBING  
DVC to HDD / DVD Dubbing  
Before recording from DVC, see page 54 for connection  
instructions.  
Preparing for DV dubbing (DVC to HDD):  
• Make sure your DVC is in video mode.  
Preparing for DV dubbing (DVC to DVD):  
• Insert a recordable DVD.  
• Make sure your DVC is in video mode.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
If you are recording to the HDD, press [HDD] first.  
If you are recording to a disc, press [DVD] first.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [SOURCE] or [CHANNEL  
select “L3(DV-IN)”.  
/
] to  
CHANNEL  
1
PQRS  
L3 (DV-IN)  
AB-1234  
0:00:00  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
OK  
Press [REC MODE] repeatedly to  
select a recording mode.  
(Refer to page 42.)  
DISPLAY  
RETURN  
2
3
4
V.REPLAY  
V.SKIP  
Press [DISPLAY].  
RAPID PLAY  
Press [OK] to display the item  
selection. Use [K / L] to select  
“DV Input”, then press [OK].  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
1/  
1
1/  
1
+
RW  
DVD  
DV Input  
L3 (DV-IN)  
AB-1234  
0:12:34  
DVD HQ(1Hr)  
1h00m  
Press [PLAY B] to find where you  
wish to start dubbing. Then, press  
[STOP C] where you wish to start  
dubbing.  
5
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 57  
DUBBING  
Use [K / L] to select “Start Rec”, then  
press [OK].  
The dubbing will start.  
6
7
To stop dubbing;  
A) Press [C STOP] on the unit. or  
B) Use [K / L] to select “Control”,  
then press [OK].  
Use [K / L] to select “HDD” /  
“DVD”, then press [OK].  
Then press [STOP C].  
Note for DV dubbing  
• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.  
When you press [OK] at step 6, then, it will start dubbing when it comes to the paused point.  
• The unit does not send out the output signal to DVC.  
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.  
• Do not connect more than 1 DVC.  
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.  
• If no video signal is detected from the DVC during DVC to HDD or DVD dubbing, the recording will be paused and  
“I” will flash on the TV screen. The recording will resume when the unit detects the video signal again.  
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 56.  
• Date/time and cassette memory data will not be recorded.  
• Pictures with a copy-guard signal cannot be recorded.  
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire  
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark  
of SONY). It enables digital dubbing between DV devices with little degradation.  
• You cannot dub from DVC to both HDD and DVD at the same time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 EN  
DUBBING  
Selected Title Dubbing  
Preparing for dubbing (HDD to DVD):  
• Insert a recordable DVD.  
Preparing for dubbing (DVD to HDD):  
• Insert a disc to be dubbed.  
Press [SETUP] in stop mode.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “Dubbing”, then  
press [OK].  
CHANNEL  
2
PQRS  
Setup  
General Setting  
Timer Programming  
Title List  
SPACE  
AUDIO  
CLEAR  
Disc Edit  
SETUP  
REPEAT  
HDMI  
TITLE  
HDD Menu  
Dubbing  
DISC MENU  
OK  
HDD to DVD  
DISPLAY  
RETURN  
Use [K / L] to select “HDD DVD”,  
then press [OK].  
DVD to HDD  
3
V.REPLAY  
V.SKIP  
Use [K / L] to select “DVD HDD”,  
then press [OK].  
e.g.) HDD ➔ DVD  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Dubbing  
REC MODE  
HDD  
DVD  
DVD  
HDD  
Use [K / L] to select “Add”, then press  
[OK].  
4
HDD  
DVD  
3000 MB  
Dubbing List  
Add  
Delete All  
Dubbing Start  
1/1  
• If you have registered any dubbing before,  
they will be listed in the dubbing list.  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 59  
DUBBING  
Use [K / L / s / B] to select a desired  
title, then press [OK].  
At the upper left of each title, the number will  
appear in the order of selection .  
Use [s / B] to select a desired  
recording mode, then press [OK].  
e.g.) HDD ➡ DVD  
5
6
8
HDD  
DVD  
Repeat step 5 until you register all  
the titles to be dubbed, then press  
[D. DUBBING].  
Please select REC MODE.  
SP SPP LP EP  
High HQ  
SLP Auto  
Dubbing Titles  
500 MB  
3000 MB  
e.g.) HDD  
Title List  
ABCDE  
12:00AM (10:00:00) JAN/ 4/10  
CH10 SP  
3
Confirmation message will appear.  
• Depending on the dubbing direction, the  
available recording mode varies.  
• When dubbing from HDD to DVD, you can  
select “High” to perform the high speed  
dubbing (refer to “Recording Mode for  
Dubbing” on page 53 for more details).  
1
1
2
3
6
2
4
5
5
4
Press ‘D. DUBBING’ to confirm.  
1 / 6  
The titles are now registered in the dubbing list.  
When you go back to the title list to add another  
title, titles already registered are shown with a  
check mark.  
Use [K / L] to select “Yes”, then press  
[OK].  
9
Start Dubbing?  
Yes  
No  
To delete a title:  
1 Go to the dubbing list, then use [K / L] to  
select a title. Then press [OK].  
2 Use [K / L] to select “Delete”, then press  
[OK].  
Dubbing will start.  
• It may take awhile to prepare for the dubbing.  
To stop the dubbing in progress:  
Press [C STOP] on the front panel.  
Press [STOP C] for 2 seconds on the remote  
control.  
3 Use [K / L] to select “Yes”, then press [OK].  
To move a title:  
1 Go to the dubbing list, then use [K / L] to  
select a title. Then press [OK].  
2 Use [K / L] to select “Move”, then press [OK].  
3 Use [K / L] to select a desired insert point,  
then press [OK].  
When you are dubbing from HDD to DVD, the  
confirmation message will appear, then select  
“Yes”.  
To erase all the titles in the dubbing title list:  
1 Use [K / L] to select “Delete All” in the  
dubbing menu, then press [OK].  
2 Use [K / L] to select “Yes”, then press [OK].  
Final confirmation message will appear.  
3 Use [K / L] to select “Yes”, then press [OK].  
One-touch Dubbing...  
With one-touch dubbing, you can start dubbing right  
away with just one touch.  
To dub the contents in a DVD which is finalized on  
other unit, use this function.  
During playback of the title you want to dub, press  
• To go back and forth between dubbing menu  
and dubbing list, use [s / B].  
[D.DUBBING].  
If you are playing back a DVD, DVD to HDD dubbing will  
start right away.  
If you are playing back HDD, HDD to DVD dubbing will  
start right away.  
• The dubbing will start from the beginning of the title  
being played back.  
After adding all the titles you want,  
use [K / L] to select “Dubbing Start”  
in the dubbing menu, then press  
[OK].  
7
• The unit will dub only the title being played back.  
• When dubbing from HDD to DVD, recording mode will  
automatically be set to “High” whenever the conditions  
are met (refer to page 53). Otherwise, the last selected  
recording mode will automatically be applied.  
To stop the dubbing in progress:  
Press [C STOP] on the front panel.  
Press [STOP C] for 2 seconds on the remote control.  
When you are dubbing from HDD to DVD, the  
confirmation message will appear, then select “Yes”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60 EN  
DUBBING  
One Title Dubbing (HDD to DVD only)  
This function lets you select one specific title from the  
title list for dubbing.  
Preparing for dubbing:  
• Insert a recordable DVD.  
Press [HDD] first.  
Press [TITLE].  
1
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L / s / B] to select a desired  
title to dub, then press [OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
2
3
CHANNEL  
Use [K / L] to select “Dubbing”, then  
press [OK].  
Resume Playback  
Play From Start  
Edit  
Title Delete  
Delete Multiple Titles  
Dubbing  
PQRS  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select “Yes”, then press  
OK  
[OK].  
DISPLAY  
RETURN  
Start Dubbing?  
4
Yes  
No  
V.REPLAY  
V.SKIP  
Dubbing of the selected title will start.  
To stop the dubbing in progress:  
Press [C STOP] on the front panel.  
RAPID PLAY  
Press [STOP C] for 2 seconds on the remote  
control.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 61  
PROTECTING A DISC  
To prevent accidental recording, editing or erasing the  
titles, you can protect them from “Disc Edit” menu.  
Press [SETUP].  
1
2
3
OPEN/  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [K / L] to select “Disc Protect OFF  
ON”, then press [OK].  
e.g.) DVD+RW  
PQRS  
SPACE  
AUDIO  
CLEAR  
Disc Edit  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
SETUP  
REPEAT  
HDMI  
TITLE  
Disc Protect OFF  
ON  
DISC MENU  
OK  
DISPLAY  
RETURN  
Use [K /L] to select “Yes”, then press  
V.REPLAY  
V.SKIP  
[OK].  
4
Protect this disc?  
RAPID PLAY  
Yes  
No  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Disc is now protected.  
REC MODE  
This operation may take a  
while to be completed.  
Note  
To cancel the disc protection:  
• When you insert a disc protected with this unit,  
“Disc Protect ON OFF” will appear instead of “OFF  
ON” at step 3.  
Disc Edit  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect ON  
OFF  
To release the protection for the disc, select “Disc  
Protect ON OFF” at step 3, then follow rest of the  
procedures.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 EN  
PLAYING THE DISCS ON OTHER DVD PLAYERS  
Finalizing a Disc  
Press [SETUP].  
You will need to finalize DVD+R, DVD-RW or DVD-R to  
play them back on other DVD players.  
1
Finalizing may take several minutes up to an hour.  
A shorter recording period on the disc will require a  
longer time period for finalization. Do not unplug the  
power cord during finalization.  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
“Disc Edit” menu will appear.  
2
3
4
OPEN/  
Use [K / L] to select “Finalize”, then  
press [OK].  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [K /L] to select “Yes”, then press  
[OK].  
PQRS  
Finalize disc?  
SPACE  
AUDIO  
CLEAR  
Yes  
No  
SETUP  
REPEAT  
HDMI  
TITLE  
Finalizing will start.  
DISC MENU  
Finalizing  
90%  
OK  
To cancel finalizing...  
(DVD-RW only)  
DISPLAY  
RETURN  
• To cancel finalizing at step 4, press [STOP C], select  
“Yes” with [K /L], then press [OK]. Finalizing is  
cancelled and the unit will be in stop mode.  
V.REPLAY  
V.SKIP  
RAPID PLAY  
Do you want to cancel ?  
D.DUBBING  
TIMER  
Yes  
No  
HDD  
DVD  
REC  
REC MODE  
Finalizing  
5%  
• If  
appears when pressing [STOP C], you cannot  
cancel finalizing because the finalizing has been in  
certain progress.  
• When selecting “No” and press [OK] or [RETURN],  
Note  
finalizing will be continued.  
• Once you have finalized a DVD+R/ DVD-R, you  
cannot edit or record anything on that disc.  
• You cannot cancel finalizing the DVD+R/DVD-R once  
it has started.  
• There is no need to finalize DVD+RW.  
• When you insert a DVD-RW finalized with this unit,  
“Undo Finalize” will appear instead of “Finalize”.  
This operation may take a  
while to be completed.  
Disc Edit  
Edit Disc Name  
Erase Disc  
Undo Finalize  
Finalizing is completed.  
Disc Protect ON  
OFF  
5
To release the finalizing for the disc, select “Undo  
Finalize” at step 3.  
* DO NOT turn the power off or to the standby mode  
during finalization, this will result in malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 63  
PLAYING THE DISCS ON OTHER DVD PLAYERS  
Auto Finalizing  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
You can finalize discs automatically using this function.  
You can use this function to finalize discs after finishing  
timer recordings and at the end of the disc space.  
1
[OK].  
“General Setting” menu will appear.  
Use [K / L] to select “Recording”,  
then press [OK].  
“Recording” menu will appear.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
2
3
4
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “Auto Finalize”,  
then press [OK].  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “Disc Full” or  
“End of Timer Rec”, then press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
Auto Finalize  
DISC MENU  
Disc Full  
End of Timer Rec  
OK  
Use [K / L] to select “ON”, then press  
DISPLAY  
RETURN  
[OK].  
e.g.) “Disc Full”  
5
V.REPLAY  
V.SKIP  
Disc Full  
ON  
OFF  
RAPID PLAY  
Your setting will be activated.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Press [SETUP] to exit.  
REC MODE  
6
Note  
• This function is not available after finishing daily or  
weekly program recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 EN  
INFORMATION ON PLAYBACK  
Before you play back DVD, read the following information.  
Playable Discs and Files  
Unplayable Discs  
This unit is compatible to play back the following discs.  
To play back a DVD, make sure that it meets the  
requirements for region codes and color systems as  
described below. You can play back discs that have the  
following logos will play back on the unit. Other disc  
types are not guaranteed to play back.  
The following discs will not play back on this unit.  
• CD-ROM  
• DVD-RAM  
• DVD-ROM  
• Compact Disc-Interactive (CD-I)  
• Video Single Disc (VSD)  
• DVD-audio  
• Unfinalized disc  
• DVD or CD contains Windows Media™ Audio/DivX® files  
• DVD-R or DVD-RW recorded in VR mode or non  
compatible recording format  
Playable discs  
Logos  
• Blu-ray Disc  
• HD DVD  
• Super Video CD  
On the following disc, the sound may not be heard.  
• Super audio CD - Only the sound on the CD layer can be  
heard. The sound on the high-density super audio CD  
layer cannot be heard.  
DVD-video  
DVD+RW  
Color Systems  
DVD+R  
DVD is recorded in different color systems throughout  
the world. The most common color system is NTSC  
(which is used primarily in the United States and Canada).  
This unit uses NTSC, so DVD you play back must be  
recorded in the NTSC system. You cannot play back DVD  
recorded in other color systems.  
DVD-RW  
(Finalized video mode discs only)  
DVD-R  
Region Codes  
(Finalized video mode discs only)  
This unit has been designed to play back DVD  
with region 1. DVD must be labeled for ALL  
regions or for region 1 in order to play back on  
the unit. You cannot play back DVD that are  
labeled for other regions. Look for the symbols  
on the right on your DVD. If these region  
symbols do not appear on your DVD, you cannot  
play back the DVD in this unit.  
CD-DA (audio CD)  
video CD  
The number inside the globe refers to region of the  
world.  
A DVD labeled for a specific region can only play back on  
the unit with the same region code.  
CD-RW  
CD-R  
Kodak Picture CD  
Playable files  
Media  
MP3  
CD-RW/-R  
JPEG  
is a trademark of DVD Format/Logo Licensing Corporation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 65  
INFORMATION ON PLAYBACK  
PBC (playback control) for Video CD  
Hint for HDD / DVD Playback  
The contents of HDD/DVD are generally divided into  
titles. Titles may be further subdivided into chapters.  
You can select images or information on the menu  
screen by activating the PBC (playback control) function  
of the video CD.  
This unit conforms to ver.1.1 and ver. 2.0 of video CD  
standard with PBC function.  
Ver.1.1 (without PBC function): You can enjoy playback  
picture as well as music CD.  
HDD/DVD  
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
Ver.2.0 (with PBC function): While using a video CD with  
PBC function, “PBC” appears on the TV screen.  
audio CD, video CD  
Note  
track 1  
track 2  
track 3  
track 4  
track 5  
file 5  
• PBC setting turns to “ON” when loading video CD  
with PBC function, thus, even after setting PBC to  
“OFF” and ejecting the video CD then reloading the  
video CD, this setting turns to “ON” automatically.  
MP3, JPEG  
file 3  
• Some operations cannot be performed while PBC  
function is on. Cancel PBC function temporarily to  
perform those operations by following the  
instruction below.  
folder 1  
file 1  
folder 2  
file 4  
file 2  
1) Press [SETUP].  
2) Use [K / L] to select “DISC Playback Mode”, then  
press [OK].  
“DISC Playback Mode” menu will appear.  
3) Use [K / L] to select “PBC (Video CD only)”, then  
press [OK].  
4) Use [K /L] to select “ON” or “OFF”, then press [OK].  
Your setting will be activated.  
You can play back interactive software using menu  
screens. Refer to instructions in the video CD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 EN  
BASIC PLAYBACK  
Direct Playback  
If you are playing back the titles in HDD, press [HDD]  
first, then proceed to step 2.  
If you are playing back the titles in DVD, press [DVD] first.  
Insert a disc (refer to page 27 on how  
to insert a disc).  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Align the disc to  
PQRS  
the disc tray guide.  
SPACE  
AUDIO  
CLEAR  
* Make sure the disc is compatible with this unit.  
(Refer to page 65 for the list of compatible discs.)  
SETUP  
REPEAT  
HDMI  
TITLE  
It may take a while to load  
the disc.  
DISC MENU  
OK  
Press [PLAY B] to start playback.  
If you are playing back a DVD-video or video CD  
DISPLAY  
RETURN  
with PBC function, a menu may appear.  
Refer to “Using the Title/Disc Menu” on page 71.  
2
3
V.REPLAY  
V.SKIP  
Press [STOP C] once to stop playback  
temporarily.  
• Refer to “Resume Playback” on page 72.  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Note  
• Some discs may start playback automatically.  
• You can select images or information on the menu  
screen by activating PBC (playback control) function  
(page 66).  
• If you insert a disc when the unit is in HDD mode,  
playback will start automatically when you press  
[DVD].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 67  
BASIC PLAYBACK  
Playback from the Title List  
If you are playing back the titles in HDD, press [HDD]  
first, then proceed to step 2.  
If you are playing back the titles in DVD, press [DVD] first.  
OPEN/  
Insert a disc (refer to page 27 on how  
to insert a disc).  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
* Make sure the disc is compatible with this unit.  
1
(Refer to page 65 for the list of compatible discs.)  
CHANNEL  
It may take a while to load  
the disc.  
PQRS  
SPACE  
AUDIO  
CLEAR  
For HDD, press [TITLE] to call up the  
title list. For DVD, the title list will  
automatically appear when you  
insert a disc. Otherwise, press [TITLE]  
or [DISC MENU].  
• To exit the title list, press [STOP C].  
• To resume the title list, press [TITLE].  
SETUP  
REPEAT  
HDMI  
TITLE  
2
3
DISC MENU  
OK  
DISPLAY  
RETURN  
Use [K / L // s / B] to select a desired  
title, then press [OK].  
<HDD title list>  
V.REPLAY  
V.SKIP  
Title List  
RAPID PLAY  
JAN/ 4/10 12:00AM CH10 SP  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
1
2
3
6
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
4
5
REC MODE  
1 / 6  
<DVD title list>  
1
SP(2Hr)  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
• For video CD, when “PBC (Video CD only)” in  
“DISC playback Mode” menu is set to “ON”, the  
video CD main menu will appear when  
inserting a disc. In such case, select a  
numbered menu with [the Number buttons].  
• Press [G] (for HDD)/[B] (for DVD) to display  
the next page, and press [H] (for HDD)/[{]  
(for DVD ) to display the previous page.  
Note  
• Some discs may start playback automatically.  
• You can also start playback by pressing [PLAY B]  
instead of [OK] at step 3.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68 EN  
BASIC PLAYBACK  
Note for DVD title list  
If you want to see disc information, press [{ ] when the  
first page of the title list is displayed or press [ K ] when  
the first title is selected but not when “Play”, “Edit” or  
“Overwrite” is highlighted.  
Use [K /L] to select “Play” (for DVD),  
or select “Resume Playback” or “Play  
from Start” (for HDD), then press [OK].  
e.g.) DVD  
4
5
e.g.) DVD+RW  
1
SP(2Hr)  
Play  
No Disc Name  
Edit  
Overwrite  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
Disc  
DVD+RW  
3
2
Total Titles  
Disc Space Used  
Disc Protect  
Make Edits Compatible  
0:30:48  
OFF  
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
Needed  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
e.g.) DVD+R  
Playback will start.  
Press [STOP C] once to stop playback  
temporarily.  
• Refer to “Resume Playback” on page 72.  
No Disc Name  
Disc  
DVD+R  
5
Total Titles  
Disc Space Used  
Disc Protect  
Finalize  
1:30:48  
OFF  
Finalized  
1. Disc name  
(Default “No Disc Name”)  
2. Disc type  
(DVD+RW/DVD+R/ DVD-RW/DVD-R)  
3. Total number of title  
(include “EMPTY TITLE”)  
4. Total time of recorded disc space  
5. Status of disc protection  
(“ON” is protected disc.)  
6. Making edits compatible/finalize  
• When DVD+RW is inserted:  
If the disc needs to be set “Make Edits Compatible”,  
“Needed” is displayed. Otherwise, “Not Needed” is  
displayed. (Refer to page 98.)  
• When DVD+R, DVD-RW or DVD-R is inserted:  
If “Finalize” is done, “Finalized” is displayed.  
Otherwise, “Unfinalized” is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 69  
BASIC PLAYBACK  
Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files  
Press [DVD] first.  
Insert a playable disc (refer to page  
27 on how to insert a disc).  
* Make sure the disc is compatible with this unit.  
(Refer to page 65 for the list of compatible discs.)  
1
2
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
It may take a while to load  
the disc.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
When an audio CD is inserted, track list will  
appear.  
When a CD-RW/-R with MP3/JPEG files is  
inserted, file list will appear.  
When you insert a CD-RW/-R mixed with MP3/  
JPEG files, the playback media selection screen  
will be displayed.  
For MP3, select “Music”, for JPEG, select “Photo”.  
• To exit the track/file list, press [STOP C].  
• To resume the track/file list, press [TITLE].  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select a desired folder  
or track/file, then press [OK].  
e.g.) File list  
OK  
DISPLAY  
RETURN  
File List  
V.REPLAY  
V.SKIP  
DISC NAME  
Folder1  
Folder2  
JPEG file1  
JPEG file2  
JPEG file3  
JPEG file4  
JPEG file5  
JPEG file6  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
1/ 2  
REC MODE  
When selecting track/file:  
Playback will start.  
When selecting the folder (Not available for audio CD):  
The files in the folder will appear.  
Use [K / L] to select the file or folder you want to play  
back, then press [OK].  
• Press [PLAY B], [OK] or [B] to move to any lower  
hierarchies.  
• Press [s] or [RETURN] to move back to the previous  
hierarchy.  
Hints for audio CD tracks and MP3 / JPEG files:  
• Folders are shown by  
• Audio CD tracks are shown by  
.
.
• MP3 files are shown by  
• JPEG files are shown by  
.
.
• The system can recognize up to 255 folders, up to 99  
tracks/999 files.  
• Letters of a file/folder name overflowing the given space  
will be displayed as “...”. Unrecognizable characters will  
be replaced with asterisks.  
Note  
• The audio source of MP3 files cannot be recorded as  
digital sound by an MD or DAT deck.  
• If there are no files in the folder, “No Files” will be displayed.  
It is recommended that files to be played back in this  
unit are recorded under the following specifications:  
• Files whose extension is other than “.mp3(MP3)” or  
“.jpg/.jpeg(JPEG)” will not be listed.  
<MP3>  
• Sampling frequency  
• Constant bit rate  
<JPEG>  
• Upper limit  
• Lower limit  
• Some unplayable folders or files may be listed due to  
the recording status.  
• High-resolution JPEG files take longer to be displayed.  
• Progressive JPEG files (JPEG files saved in progressive  
format) cannot be played back on this unit.  
: 44.1 kHz or 48 kHz.  
: 112 kbps - 320 kbps  
: 6,300 x 5,100 dots.  
: 32 x 32 dots.  
• File size of image maximum : 12 MB.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70 EN  
BASIC PLAYBACK  
Using the Title / Disc Menu  
Playing Back an Audio CD and a  
CD-RW/-R with MP3/JPEG Files (cont’d)  
Kodak Picture CD  
DVD or video CD with PBC function may contain a title  
list, which describes the contents of the disc, or a disc  
menu, which guides you through the available functions  
in the disc.  
The Picture CD is a service to convert photographs taken  
by a conventional film camera into digital data and write  
the data on a CD. You can enjoy picture images on the TV  
set by playing back the Picture CDs.  
For details of Kodak Picture CD, contact a shop that  
provides developing service of Kodak Inc.  
Press [DVD] first.  
1)Insert a disc (refer to page 27 on how to insert a  
disc).  
1)Press [TITLE].  
* Make sure the disc is compatible with this unit. (Refer  
to page 65 for the list of compatible discs.)  
Picture CD  
Image 1  
It may take a while to load the disc.  
1
4
2
5
3
6
2)Press [TITLE] or [DISC MENU] to call up the title list  
or disc menu.  
3)Use [K / L / { / B] to make a selection, and then  
press [OK] to enable your selection.  
1 / 2  
4)Press [STOP C] to exit.  
• To exit the Picture CD thumbnail List, press [RETURN]  
or [STOP C].  
Arrow icons mean the title list includes a next or  
previous page. Use [{ / B] in the direction of the  
icon you wish to follow. You can also quick review the  
six thumbnails at once between the first and last  
pages by pressing [H] / [G].  
Note  
• You can select a numbered menu with  
[the Number buttons] also.  
• Menus vary among discs. Refer to the information  
accompanying the disc for details.  
• [TITLE] or [DISC MENU] will not always be active  
2)Use [K / L / { / B] to select a desired track to be  
with all DVD.  
played back, then press [PLAY B] or [OK].  
• For video CD, when “PBC (Video CD only)” in “DISC  
Playback Mode” menu is “ON”, the video CD main  
menu will appear when inserting a disc.  
An image will be played back from the selected track  
and go to the next one in turn.  
3)Press [STOP C] to stop playback.  
• Press [TITLE] to display the thumbnail again.  
Pause  
1)During playback, press [PAUSE F].  
Playback will be paused.  
Notes on JPEG and Kodak Picture CD:  
• After track is displayed for 5 seconds or 10 seconds  
(set in “Slide Show” on page 75) the display moves to  
the next track.  
During JPEG or Kodak Picture CD playback, press [B]  
or [{] to rotate a picture 90 degrees clockwise or  
counterclockwise respectively.  
(Not available when the display menu appears.)  
F
2)Press [PLAY B] to return to the normal playback.  
Note  
• On DVD, set “Still Mode” to “Field” in “Playback”  
menu if pictures in the pause mode are blurred.  
(Refer to page 106.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 71  
SPECIAL PLAYBACK  
Resume Playback  
Note  
• Forward/reverse speed will be indicated with icons  
as follows.  
You can play back from where you stopped playing back  
the disc last.  
forward (approx. speed)  
2x:  
20x:  
40x:  
1)During playback, press [STOP C].  
The resume message will appear.  
reverse (approx. speed)  
Resume ON  
5x:  
20x:  
40x:  
2)Press [PLAY B].  
In a few seconds, playback will resume from the point  
at which it stopped last. You can resume playback at  
the same point even if you turn the unit to the standby  
mode (HDD/DVD only).  
Variable Skip / Variable Replay  
To cancel the resume playback and start playing back  
the disc from the beginning, press [STOP C] again  
while the playback is stopped.  
During playback, you can skip forward or backward by  
the amount of time you set in “Playback” menu. To set  
For HDD:  
the time amount, refer to “  
page 106.  
Variable Skip/Replay” on  
8
You can set a resume point per every title.  
For DVD+RW/+R, DVD-RW/-R, Video CD, Audio CD,  
MP3 files and JPEG files:  
You can set only one resume point per disc.  
During playback, press [V.SKIP] if you want to skip  
forward. Press [V.REPLAY] if you want to skip  
backward.  
Note  
• For MP3/JPEG files, playback will resume from the  
beginning of the file at which playback was stopped.  
Rapid Playback  
• Resume Playback is available when you play back the  
video CD without PBC function.  
• Some video CD with the PBC function resume  
playback from the beginning of the track.  
Rapid playback function is available only during  
playback.  
This function is available only on discs recorded in the  
Dolby Digital format, and plays back in a slightly faster/  
slower speed while keeping the sound output.  
Fast Forward / Fast Reverse Playback  
1)During playback, press [RAPID PLAY].  
Press [RAPID PLAY] once during playback.  
Plays back approximately at 0.8 times of normal  
playback.  
Bx0.8:  
Bx1.3:  
B :  
1)During playback, press [D] or [E].  
Every time you press [D] or [E], approximate speed  
will be changed as follows.  
Fast forward or fast reverse playback across titles (for  
HDD/DVD) or files (for MP3) is not possible.  
Press [RAPID PLAY] twice during playback.  
Plays back approximately at 1.3 times of normal  
playback.  
Press [RAPID PLAY] 3 times to play back in  
normal speed.  
No effects.  
normal  
speed  
40x  
20x  
5x  
2x  
20x  
40x  
playback  
2)Press [PLAY B] to return to the normal playback.  
For video CD, approximate forward/reverse speeds are  
2x, 8x, 16x.  
For audio CD, MP3 files, approximate speed is fixed at  
Note  
8x with sound (indicated with  
/
).  
• Audio (language) setting cannot be changed while  
using this mode.  
2)Press [PLAY B] to return to the normal playback.  
• This feature may not work at some point in a disc.  
• Audio is PCM during rapid playback mode except  
when using digital audio connection.  
• When using digital audio connection (COAXIAL), the  
LPCM sound (2 channel) will be output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72 EN  
SPECIAL PLAYBACK  
Step by Step Playback  
Chasing Playback during Recording  
You can play back a title being recorded from the  
beginning while recording continues.  
1)During playback, press [PAUSE F].  
Playback will be paused and sound will be muted.  
2)Press [G] repeatedly.  
Playback will advance one frame (or step) at a time  
when you press [G] with the sound muted.  
1)During recording, press [PLAY B].  
Playback of the title you are recording will start from  
the beginning.  
• Elapsed playback time will be displayed in the front  
panel display.  
To play back step by step backward:  
Press [H] repeatedly.  
Every time you press the button, the playback will go  
backward by one frame.  
• Press and hold [H] / [G] to reverse/advance  
continuously.  
2)Press [STOP C] once to stop the playback, .  
The front panel display will switch back to show the  
elapsed recording time.  
If you press [STOP C] twice, it will stop the recording.  
Note  
3)Press [PLAY B] to return to the normal playback.  
• You can also use the special playback functions such  
as [E], [D] etc. during chasing playback mode.  
• [REC] is invalid during chasing playback.  
• You can no longer fast forward the playback when it  
comes to a few seconds before the current recording  
point.  
Note  
• Only step by step forward playback is available for  
playing back video CD.  
Slow Forward/Slow Reverse Playback  
Simultaneous Playback and Recording  
1)During playback, press [PAUSE F]. Then press  
With regard to HDD, you can continue recording a  
program while playing back another title.  
To do so, press [TITLE] during recording and select a title  
you like to play back, and then press [PLAY B].  
[
D] or [ E].  
Every time you press [D] or [E], approximate speed  
will be changed as follows. (The sound will remain  
muted.)  
(You can also start the playback from the title list menu.)  
To playback a title being recorded while continuing to  
record, refer to “Chasing Playback during Recording”  
above (available only with HDD).  
pause  
1/4x  
1/8x  
1/16x  
1/16x  
1/8x  
1/3x  
2)Press [PLAY B] to return to the normal playback.  
Note  
Note  
• Video CD, audio CD, MP3/JPEG files recorded on a  
disc can also be played back during HDD recording.  
• Forward/reverse speed will be indicated with icons  
as follows.  
forward (approx. speed)  
1/16x:  
1/8x:  
1/3x:  
reverse (approx. speed)  
1/16x:  
1/8x:  
1/4x:  
• Only slow forward is available when playing back  
video CD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 73  
SPECIAL PLAYBACK  
Zoom  
Marker Setting  
This feature allows you to assign a specific point on a title  
to be called back later.  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
to display the selection  
1)During playback, press [DISPLAY] to bring up the  
display menu.  
If the display menu is already shown, skip to step 2.  
menu.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
2)Use [{ / B] to select  
to display the marker list.  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired zoom factor to zoom,  
then press [OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired marker number.  
When it reaches the desired point, press [OK].  
× 1.2  
× 1.5  
× 2.0  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1
2
3
4
5
6
Zoom menu will appear.  
There are four options  
(x1.0, x1.2, x1.5 and x2.0), these are displayed  
excluding the current zoom rate.  
Zoom area will be displayed.  
The title (track) number and the time will be displayed.  
4)Use [K / L / { / B] to select a desired zoom position,  
then press [OK].  
4)To return to the marker later:  
Use [K / L] to select the desired marker number,  
then press [OK].  
Note  
• To clear a marker, select the marker number to be  
cleared, then press [CLEAR].  
• All markers will be erased when you operate these  
operations listed below.  
– opening the disc tray (DVD/CD only)  
– turning the unit to the standby mode (DVD/ CD only)  
– make additional recording on the disc (DVD only)  
– editing any title (DVD only)  
– dividing the title (HDD only)  
– deleting a scene of the title (HDD only)  
• You can mark up to 6 points.  
Zoom playback will start.  
Note  
• When selecting a smaller factor than the current one,  
the zoom area will not be displayed.  
• To exit the zoom menu, press [RETURN] repeatedly  
at step 3.  
• To cancel the zoom function, select “x1.0” using  
[K / L], then press [OK] at step 3.  
• Marker setting is not available when you play back  
the video CD with PBC function.  
• You cannot slide the zoomed picture on some JPEG  
files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74 EN  
SPECIAL PLAYBACK  
Repeat Playback  
Note  
• Point B for the repeat A-B playback should be set  
within the same title or track as point A.  
Available repeat function may vary depending the discs.  
1)During playback press [DISPLAY], then proceed to  
• To cancel the repeat playback, select “OFF” at step 3.  
The repeat setting will also be cancelled when you  
stop playback.  
step 2), or press [REPEAT] then proceed to step 3).  
• If the display menu is already shown, skip to step 2.  
• You cannot select “Group” during the random  
playback.  
• Repeat playback is not available when you play back  
the video CD with PBC function.  
2)Use [{ / B] to select  
to display the selection  
menu.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired repeat type, then  
Random Playback  
press [OK].  
e.g.) HDD/DVD  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
You can play back a disc randomly instead of playing  
back in the original order.  
OFF  
Title  
Chapter  
A – B  
1)Press [SETUP].  
2)Use [K /L] to select “DISC Playback Mode”, then  
e.g.) audio CD, video CD  
press [OK].  
1/  
1/  
1/  
5
0:00:15 / 0:05:00  
“DISC Playback Mode” menu will appear.  
For MP3, use [K /L] to select “Music”, then press [OK].  
For JPEG, use [K /L] to select “Photo”, then press [OK].  
3)Use [K /L] to select “Random Play”, then press [OK].  
Random playback will start.  
CD  
OFF  
Track  
All  
A – B  
e.g.) MP3 files  
e.g.) JPEG files  
5
0:00:15  
Note  
MP3  
• To cancel random playback, press [STOP C] twice  
during random playback. “OFF” appears on the TV  
screen.  
OFF  
Track  
All  
Group  
• For video CD with PBC function, the PBC setting will  
be switched to the standby mode automatically  
when you start random playback.  
5
0:00:05  
JPEG  
OFF  
Track  
All  
Group  
Slide Show  
The selected repeat playback will start.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
+RW  
You can select the display time between 5 seconds and  
10 seconds.  
Repeat  
Title  
1)Follow steps 1 and 2 in “Random Playback” on this  
page.  
Title (HDD/DVD only):  
The current title will be played back repeatedly.  
Chapter (HDD/DVD only):  
2)Use [K /L] to select “Slide Show”, then press [OK].  
3)Use [K /L] to select the display time, then press [OK].  
4)Press [SETUP] to exit.  
The current chapter will be played back repeatedly.  
All (DVD/audio CD/video CD without PBC function/  
CD with MP3, JPEG):  
All titles in the media will be played back repeatedly.  
A-B (HDD/DVD/audio CD/video CD without PBC  
function only):  
Desired section can be played back repeatedly.  
1) Use [K / L] to select “A-B”, then press [OK].  
2) Press [OK] at the desired starting point A.  
3) Press [OK] at the desired ending point B.  
Note  
• Large-size JPEG files take a few moments to be  
displayed.  
Track (audio CD/video CD without PBC function/  
MP3 or JPEG files only):  
The current track or file will be played back repeatedly.  
Group (MP3/JPEG files only):  
The current folder will be played back repeatedly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 75  
SPECIAL PLAYBACK  
Program Playback  
Playing Back the Autostart Recording  
By playing back the autostart recording, you can pause  
or go back the TV program you are currently watching.  
For the autostart recording refer to “AUTOSTART  
RECORDING” on page 46.  
You can program the disc to play back in your desired  
order.  
1)Press [SETUP].  
To pause and resume the TV program:  
1)When watching TV program through this unit’s  
tuner, press [PAUSE F].  
2)Use [K /L] to select “DISC Playback Mode”, then  
press [OK].  
“DISC Playback Mode” menu will appear.  
TV program will be paused and sound will be muted.  
2)Press [PLAY B] to resume the TV program you were  
watching from where you have paused.  
3)Use [K / L] to select “Program Play”, then press  
[OK].  
To go back the TV program:  
4)Use [K / L] to select a desired track, then press [OK]  
or [B].  
When watching TV program through this unit’s  
tuner, press [H], [E] or [V.REPLAY].  
• While playing back the autostart recording, pressing  
[H] or [G] skips playback point 5 minutes  
backward or forward.  
DISC Playback Mode  
Program Play  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
To go back to the specific time:  
1)When watching TV program through this unit’s  
tuner, press [DISPLAY], then press [OK].  
Total 0:00:00  
2)Use [K / L / { / B] or [the Number buttons] to enter  
a desired time, then press [OK].  
Repeat this step until you program all the desired  
tracks.  
• While playing back the autostart recording, press  
[STOP C] to cancel the playback.  
5)Press [PLAY B].  
• When watching TV program or while playing back the  
autostart recording, press [DISPLAY] once to display  
the autostart recording information. Refer to  
DISC Playback Mode  
Program Play  
“Autostart Recording Information” on page 23.  
09 04 10 06 --  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
• Noise reduction, zoom and virtual surround functions  
are available while playing back the autostart  
recording.  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
Total 0:31:07  
Note  
• While playing back the autostart recording, you  
cannot change the channels.  
Program playback will start.  
• While playing back the autostart recording, you  
cannot change the DTV audio language.  
• If you change to DVD mode or if the timer recording  
starts while playing back the autostart recording, the  
playback will be stopped.  
• When this unit turns on for the timer recordings, the  
autostart recording will not be performed.  
• For the contents of the autostart recording, you  
cannot change the TV audio.  
Note  
• To erase tracks you selected, press [CLEAR] at step 4.  
• You can make program settings up to 50 tracks.  
• To cancel program playback, press [STOP C] twice  
during program playback. “OFF” appears on the TV  
screen.  
• Program information will be retained until you turn  
the unit to the standby mode or open the disc tray.  
• You may also select a desired track using  
[the Number buttons] at step 4.  
• For video CD with PBC function, the PBC setting will  
be switched to the standby mode automatically  
when you start program playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76 EN  
SEARCH  
Title / Chapter Search  
Track Search  
Using [H] / [G]  
Using [H] / [G]  
1)During playback, press [G] to skip the current  
track/file and move to the next.  
1)During playback, press [G] to skip the current  
title or chapter and move to the next.  
The track/file will move forward one at a time.  
To go back to the beginning of the current track/file,  
press [H].  
The title or chapter will move forward by one at a time.  
• If there is no chapter in one title, the current title will  
be skipped.  
Press it repeatedly to go to the previous track/file. The  
To go back to the beginning of the current title or  
chapter, press [H].  
Press it repeatedly to go to the previous title or  
chapter. The title or chapter will move backward one  
at a time.  
track/file will move backward one at a time.  
For JPEG files, press it once to go to the previous file.  
Using [DISPLAY]  
1)During playback, press [DISPLAY] to bring up the  
display menu.  
Note  
If the display menu is already shown, skip to step 2.  
• With regard to HDD, chapter search using  
[H] /[G] is available only within the same title.  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) audio CD  
Using [DISPLAY]  
1/  
5
0:00:15 / 0:05:00  
CD  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
e.g.) MP3 files  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1/  
5
0:00:15  
MP3  
The number next to  
3)Title:  
Use [K / L] or [the Number buttons] to enter a  
desired title number to search, then press [OK].  
Title search will start.  
Chapter:  
will be highlighted.  
The number next to  
will be highlighted.  
3)Use [K / L] or [the Number buttons] to enter a  
desired track/file number to search, then press  
[OK].  
After the search, playback will start automatically.  
Press [B] to move to the number next to  
chapter.  
for  
Note  
• During CD playback you can enter a track number  
directly using [the Number buttons] for track search  
without displaying the menu.  
Use [K / L] or [the Number buttons] to enter a  
desired chapter number to search, then press [OK].  
After the search, playback will start automatically.  
• Track search using [DISPLAY] is not available when  
you play back the video CD with PBC function.  
Note  
• In search mode display, total numbers of each search  
contents (title/chapter/time) are shown as a  
denominator.  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
total number  
of titles  
total time  
of the title  
total number  
of chapters  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 77  
SEARCH  
Time Search  
1)During playback, press [DISPLAY] to bring up the  
display menu.  
If the display menu is already shown, skip to step 2.  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
e.g.) audio CD  
1/  
5
0:00:15 / 0:05:00  
CD  
The number next to  
will be highlighted.  
To move to the number next to  
, press [B].  
When time search is not available,  
counter are not displayed.  
and time  
3)Use [K / L / { / B] or [the Number buttons] to enter  
a desired time to search, then press [OK].  
After the search, playback will start automatically.  
Note  
• Time search is available only in the same track, file or  
title.  
• Time search is not available when you play back the  
video CD with PBC function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78 EN  
SELECTING THE FORMAT OF AUDIO AND VIDEO  
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.  
Switching Subtitles  
Switching Audio Soundtrack  
DVD-video may have subtitles in 1 or more languages.  
Available subtitle languages can be found on the disc  
case. You can switch subtitle languages anytime during  
playback.  
When playing back a DVD-video recorded with 2 or more  
soundtracks (these are often in different languages), you  
can switch them during playback.  
When playing back video CD, audio CD you can switch  
“L/R”(stereo), “L”(left) or “R”(right).  
1)During playback, press [DISPLAY].  
1)During playback press [DISPLAY], then proceed to  
step 2), or press [AUDIO] then proceed to step 3).  
• If the display menu is already shown, skip to step 2.  
2)Use [{ / B] to select  
to display the selection  
menu.  
e.g.) DVD-video  
2)Use [{ / B] to select  
menu.  
to display the selection  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired audio soundtrack or  
audio channel, then press [OK].  
For DVD-video  
• Audio soundtrack will switch.  
3)Use [K / L] to select a desired subtitle language,  
then press [OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
1.Dolby Digital 5.1ch English  
2.Dolby Digital 2ch English  
OFF  
1.English  
• If the title contains both main and sub audio, you can  
further select “L” (main), “R” (sub), or “L/R” (mixed of  
main and sub).  
For audio CD, video CD  
• Audio channel will switch.  
e.g.) audio CD  
Subtitle will be displayed in the selected language.  
When selecting “OFF”, subtitle will disappear.  
Note  
• Some discs will only allow you to change the subtitle  
from the disc menu. Press [TITLE] or [DISC MENU] to  
display the disc menu.  
1/  
5
0:00:15 / 0:05:00  
CD  
1. L/R  
2. L  
3. R  
• If a 4-digit language code appears in the subtitle  
menu, refer to “LANGUAGE CODE” on page 119.  
Note  
• Some discs will only allow you to change the  
soundtrack from the disc menu. Press [TITLE] or  
[DISC MENU] to display the disc menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 79  
SELECTING THE FORMAT OF AUDIO AND VIDEO  
Switching Virtual Surround System  
Switching Camera Angles  
Some DVD-video have scenes shot from 2 or more  
angles. Angle information should be on the disc case if  
the disc contains multi-angle scenes.  
You can enjoy stereophonic virtual space through your  
existing 2 channel stereo system.  
1)During playback, press [DISPLAY].  
1)During playback, press [DISPLAY] to bring up the  
display menu.  
If the display menu is already shown, skip to step 2.  
2)Use [{ / B] to select  
, then press [OK].  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
2)Use [{ / B] to select  
menu.  
to display the selection  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
Angle icon appears when a switching camera angle is  
available.  
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,  
then press [OK].  
e.g.) DVD-video  
Angle will switch each time you press [OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
Note  
OFF  
• Angle icon does not appear on the TV screen in a  
case you set “Angle Icon” to “OFF” in “Playback”  
menu. Refer to page 106.  
Type 1  
Type 2  
OFF  
: no effect  
Type 1 : natural effect  
Type 2 : emphasized effect  
Reducing Block Noise  
Note  
• Select “OFF” in a case sound is distorted.  
• The setting will be kept even when the unit is turned  
off.  
This function reduces noise in the playback picture.  
1)During playback, press [DISPLAY].  
2)Use [{ / B] to select  
menu.  
to display the selection  
e.g.) DVD-video  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
3)Use [K / L] to select a desired option, then press  
[OK].  
1/  
5
1/  
5
0:01:00 / 1:23:45  
DVD Video  
OFF  
Type 1  
Type 2  
Your setting will be activated.  
OFF  
: When playing back titles with a few noises  
such as DVD-video.  
Type 1 : For the titles recorded in long time mode  
such as SLP mode.  
Type 2 : Same as type 1, only more effective.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80 EN  
INFORMATION ON EDITING  
Guide to a Title List  
Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from  
this list and easily edit the titles as you prefer.  
Press [HDD], then press [TITLE].  
Press [DVD], then press [TITLE].  
HDD mode  
DVD mode  
6
Title List  
1
SP(2Hr)  
JAN/ 4/10 12:00AM CH10 SP  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
1
2
3
6
2
Play  
Edit  
Overwrite  
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
4
5
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
1 / 6  
3 4  
1
11  
e.g.) DVD  
Edit  
Title Delete  
2
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
NOV/22/10 11:35AM CH13 EP  
1 : 05 : 00  
16 15 14  
13  
12  
1. Title name (editable): Recording date, time, channel  
and the recording mode will be assigned  
9. Recording mode: Currently selected recording mode  
is displayed here.  
automatically as the title name until you edit it.  
10. Capacity indicator: Indicating the position and the  
amount of each title in the disc. The portion for the  
selected title is highlighted.  
2. Title information: Time at which the recording of  
the title was started, duration of the title, date  
recorded, channel recorded, and the recording mode  
in which the title was recorded.  
3. Title List: List of titles recorded on the HDD. Each  
title is indicated by its index picture. Following icons  
may be displayed on the index picture.  
• It may not indicate the precise capacity of the disc.  
• If the duration of a title is too short, it may not be  
reflected in the capacity indicator.  
11. Index pictures: A cut from the recorded content is  
displayed here.  
: Indicating the title has never been played back  
yet.  
: Indicating the title is protected.  
: Indicating the title is a copy-protected title.  
12. Submenu: Submenus for the selected menu are  
displayed here.  
13. Title name (editable): If you do not name the title,  
the recorded date, time, channel, and the recording  
mode are displayed here.  
I
: If you call up the title list while recording, “I”  
will be displayed on the index picture of the  
title currently being recorded.  
14. Progress bar: Indicating the progress of the  
playback.  
4. Arrow: Indicating there is a previous/next page.  
5. Title list page number: Current page/total pages.  
15. Preview window: Preview of the selected title is  
displayed here.  
6. Title list: List of the titles recorded on the disc, and  
16. Playback status: Indicating the current playback  
their information.  
status of the selected title.  
7. Arrow: Indicating there is a previous/next page.  
Press [STOP C] to exit the title list.  
8. Title information: On the first line, title name  
(editable) is displayed. On the second line, the date  
recorded and length of the title are displayed.  
Empty title: The portion of the disc where there is no  
recordings are made. As for the empty title, available  
recording time by the selected recording mode is  
displayed on the second line.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 81  
INFORMATION ON EDITING  
Edit Menu  
Media  
HDD  
DVD  
Available Features  
Putting names on titles  
Deleting a title  
✔
✔
✔
✔
✔
✔
✔
Deleting selected titles  
Deleting a scene of a title  
Adding / deleting chapter marks  
Hiding chapters  
✔
✔
Protecting a title  
✔
✔
✔ *1  
✔
Dividing a title  
Setting an index picture  
Finalizing a disc  
Note  
✔
• Once you have finalized a DVD+R/ DVD-R, you  
cannot edit or record anything on that disc.  
✔ *2  
✔
Making edits compatible  
Putting name on disc  
Setting or Releasing disc protect  
• While recording a title to an HDD or a DVD, only  
deleting HDD titles is available.  
✔
✔
: Available  
: Not available  
*1 : -RW/+RW discs only  
*2 : +RW discs only  
How to Access the Edit Menu  
HDD  
DVD  
Press [HDD] first.  
Press [DVD] first.  
1)Press [TITLE].  
1)Press [TITLE].  
2)Use [K / L / { / B] to select a desired title, then  
press [OK].  
2)Use [K / L] to select a desired title, then press [OK].  
SP(2Hr)  
1
Title List  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
JAN/ 4/10 12:00AM CH10 SP  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
2
1
2
3
6
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
3
4
5
EMPTY TITLE  
1:37:52 SP (2Hr)  
1 / 6  
3)Use [K / L] to select “Edit”, then press [OK].  
3)Use [K / L] to select “Edit”, then press [OK].  
SP(2Hr)  
1
Play  
Resume Playback  
Play From Start  
Edit  
Edit  
Overwrite  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
Title Delete  
Delete Multiple Titles  
Dubbing  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
Edit  
Edit  
Scene Delete  
1
Edit Title Name  
Chapter Mark  
Title Dividing  
Protect  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
JAN/ 4/10 12:00AM CH10 LP  
1 : 05 : 00  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82 EN  
EDITING  
Deleting a Title  
You can delete a title which you do not need anymore.  
Please be advised that the title once deleted cannot be  
brought back.  
If you are editing the titles on HDD, press [HDD] first.  
If you are editing the titles on DVD, press [DVD] first.  
Press [TITLE].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L / { / B] to select a desired  
title to delete, then press [OK].  
If you are editing the titles on HDD, proceed to step 4.  
If you are editing the titles on DVD, proceed to step 3.  
HDD mode  
CHANNEL  
2
PQRS  
SPACE  
AUDIO  
CLEAR  
Title List  
Title 1  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
SETUP  
REPEAT  
HDMI  
TITLE  
1
2
3
6
DISC MENU  
4
5
OK  
1 / 1  
DISPLAY  
RETURN  
DVD mode  
V.REPLAY  
V.SKIP  
SP(2Hr)  
1
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
RAPID PLAY  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Use [K / L] to select “Edit”, then press  
[OK].  
3
SP(2Hr)  
1
Play  
Edit  
Overwrite  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
Note  
• For DVD+RW/DVD-RW, the available disc space will  
increase only when the last recorded title in the title  
list is deleted. For DVD+R/DVD-R, the disc space will  
not be affected.  
• Deleted part of the titles in the capacity indicator  
changes in color.  
• As for DVD+RW/DVD-RW if you delete the title, deleted  
title will be displayed as “EMPTY TITLE”.  
• For DVD, it may take a while to write the data to the  
disc after you press [OK] at step 5.  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 83  
EDITING  
Use [K / L] to select “Title Delete”,  
then press [OK].  
HDD mode  
Use [K / L] to select “Yes”, then press  
[OK].  
Final confirmation message will appear. Select  
4
5
“Yes”, then press [OK].  
Resume Playback  
Play From Start  
Edit  
Title Delete  
Delete Multiple Titles  
Dubbing  
The title is now deleted.  
Title List  
Title 2  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
1
2
3
DVD mode  
4
5
Edit  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
1 / 1  
SP(2Hr)  
1
EMPTY TITLE  
0:21:14 SP (2Hr)  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
Confirmation message will appear.  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84 EN  
EDITING  
Deleting Selected Titles  
Use [K / L] to select “Delete Multiple  
Titles”, then press [OK].  
Resume Playback  
Play From Start  
Edit  
Title Delete  
Delete Multiple Titles  
Dubbing  
You can delete titles which you do not need anymore.  
Please be advised that the titles once deleted cannot be  
brought back.  
3
4
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L / { / B] to select the title  
you want to delete, then press [OK].  
CHANNEL  
Title List  
PQRS  
Title 1  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
1
4
2
3
6
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
5
DISC MENU  
Press ‘CLEAR’ to confirm.  
1 / 1  
Trash mark will appear indicating the title is  
marked for deletion.  
OK  
DISPLAY  
RETURN  
Repeat step 4 until you select all the  
titles you want to delete.  
V.REPLAY  
V.SKIP  
5
Title List  
Title 2  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
1
4
2
3
6
RAPID PLAY  
D.DUBBING  
TIMER  
5
HDD  
DVD  
REC  
REC MODE  
Press ‘CLEAR’ to confirm.  
1 / 1  
Press [CLEAR].  
Confirmation message will appear.  
6
7
Use [K / L] to select “Yes”, then press  
[OK].  
Press [HDD], then press [TITLE].  
Final confirmation message will appear. Select  
“Yes”, then press [OK].  
Titles are now deleted.  
1
2
Title List  
Use [K / L / { / B] to select any title,  
then press [OK].  
Title 1  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
1
2
3
Title List  
Title 1  
12:00AM (1:00:00) JAN/ 4/10  
CH10 SP  
4
1
4
2
3
6
1 / 1  
5
To remove the trash mark from the title:  
1 / 1  
Select the title with the trash mark, then press  
[OK].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 85  
EDITING  
Putting Names on Titles  
You can put title names on the titles and change the  
names from this menu.  
Use [K /L] to select “Yes”, then press  
[OK].  
4
5
Edit - Edit Title Name  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Yes  
1
No  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
MY FAVORITE  
PQRS  
1 : 05 : 00  
SPACE  
AUDIO  
CLEAR  
The title name is now updated.  
SETUP  
REPEAT  
HDMI  
TITLE  
Press [RETURN] once or repeatedly to  
go back to the title list.  
For DVD, the data will be written onto the disc  
momentarily.  
DISC MENU  
This operation may take a  
while to be completed.  
OK  
DISPLAY  
RETURN  
Guide to Edit Title Name  
V.REPLAY  
V.SKIP  
1)Use [K / L] to select a desired character set, then  
press [OK].  
2)Follow the list below, use [the Number buttons]  
repeatedly until the desired letter appears.  
RAPID PLAY  
When you finish entering a title name, press [OK].  
Select  
ABC  
abc  
123  
@ ! ?  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
Press  
<space>  
<space>  
<space>  
0
1
2
! ”# $ % & ’( )  
+ , - . / : ; < = >  
*
(*1)  
(*1)  
1
? @ [ ] ^ _ { | }  
Use [K / L] to select “Edit Title  
Name”, then press [OK].  
e.g.) DVD  
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
GHI  
ghi  
Edit  
JKL  
jkl  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Hide Chapter  
Index Picture  
Title Dividing  
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
wxyz  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
*1 Press  
, character set will be changed to “ @!? ”  
to to go back to  
mode automatically. Press  
the previous character set.  
To enter a title name, follow the  
steps of “Guide to Edit Title Name”  
on this page.  
• To delete letters, press [CLEAR] repeatedly.  
Holding [CLEAR] will delete all letters.  
• Use [s / B] to move the cursor to the left and right.  
• You can enter up to 30 letters.  
3
Edit - Edit Title Name  
A
a
B
b
2
!
C
c
3
?
1
character set  
1
Note  
@
• Undefined letters in a title name are shown by “*”. If  
you delete them, adjoining letters may change to “*”  
or other.  
M
1 : 05 : 00  
area for entering title names  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86 EN  
EDITING  
Chapter Marks (Add)  
You can put chapter marks in each title. Once a chapter is  
marked, you can use it for the chapter search feature.  
To add a chapter mark:  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
2
3
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
Play back the title up to the point  
where you want to set a new chapter  
mark.  
When it comes to the desired point, press  
[PAUSE F].  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K /L] to select “Add”, then press  
[OK].  
e.g.) DVD  
OK  
DISPLAY  
RETURN  
4
Edit - Chapter Mark  
V.REPLAY  
V.SKIP  
Add  
1
Delete  
Delete All  
Chapter  
2/  
3
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
REC MODE  
Use [K /L] to select “Yes”, then press  
[OK].  
5
Edit - Chapter Mark - Add  
Yes  
1
No  
Chapter  
2/  
3
F
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
Note for adding or deleting chapter marks  
• Maximum number of chapter marks in a title is 99  
(for HDD/DVD) and the maximum number of chapter  
marks in total is no limit (for HDD)/254 (for DVD).  
If the number of the chapter marks exceed the limit,  
you cannot add any more chapter marks.  
• Only with regard to DVD editing, you may not be  
able to add chapter marks depending on the  
duration of the title or the number of chapters.  
• Only with regard to DVD editing, remaining time of  
the disc may decrease when adding chapter marks or  
increase when clearing chapter marks depending on  
the recording time or edited contents.  
• When you search for a point at step 3, you can also  
use the special playback functions such as [G],  
[D] etc.  
A new chapter mark is now added.  
To add more chapter marks, repeat steps 3 to 5.  
Press [RETURN] once or repeatedly to  
go back to the title list.  
For DVD, the data will be written onto the disc  
momentarily.  
6
This operation may take a  
while to be completed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 87  
EDITING  
Chapter Marks (Delete)  
To delete a chapter mark:  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
1
2
3
CHANNEL  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
PQRS  
SPACE  
AUDIO  
CLEAR  
Use [H] / [G] to go to the chapter  
with the chapter mark number you  
want to delete, then press [PAUSE F].  
Chapter mark number is displayed on the  
preview screen.  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
e.g.) DVD  
OK  
DISPLAY  
RETURN  
Edit - Chapter Mark  
Add  
1
Delete  
V.REPLAY  
V.SKIP  
Delete All  
Chapter  
2/  
3
RAPID PLAY  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Use [K / L] to select “Delete”, then  
press [OK].  
4
5
Use [K /L] to select “Yes”, then press  
[OK].  
Edit - Chapter Mark - Delete  
Yes  
1
No  
Chapter  
2/  
3
F
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
The selected chapter mark is now deleted.  
To delete more chapter marks, repeat steps 3 to  
5.  
Press [RETURN] once or repeatedly to  
go back to the title list.  
For DVD, the data will be written onto the disc  
momentarily.  
6
This operation may take a  
while to be completed.  
Note  
• You cannot delete the chapter mark 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
88 EN  
EDITING  
Chapter Marks (Delete All)  
To delete all chapter marks:  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
2
3
4
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “Chapter Mark”,  
then press [OK].  
Submenu will appear.  
CHANNEL  
PQRS  
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “Delete All”, then  
press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select “Yes”, then press  
[OK].  
OK  
Edit - Chapter Mark - Delete All  
DISPLAY  
RETURN  
Yes  
1
No  
V.REPLAY  
V.SKIP  
Chapter  
2/  
3
F
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
RAPID PLAY  
Final confirmation message will appear. Select  
“Yes”, then press [OK].  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
All chapter marks are now deleted.  
Edit - Chapter Mark  
Add  
1
Delete  
Delete All  
Chapter  
2/  
3
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
Press [RETURN] once or repeatedly to  
go back to the title list.  
Data will be written onto the disc momentarily.  
5
This operation may take a  
while to be completed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 89  
EDITING  
Dividing a Title  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
You can divide one title into 2 new titles.  
1
2
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Play back the title up to the point  
where you want to divide the title.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
When it comes to the desired point, press  
[PAUSE F].  
CHANNEL  
Use [K / L] to select “Title Dividing”,  
then press [OK].  
PQRS  
SPACE  
AUDIO  
CLEAR  
3
SETUP  
REPEAT  
HDMI  
TITLE  
Use [K / L] to select “Yes”, then press  
[OK].  
The title is now divided into 2 new titles, and it  
will go back to the title list automatically. Title  
name of the divided titles are identical, and  
index pictures are reset to the first scene at this  
point.  
DISC MENU  
4
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Note  
• If an internal HDD or a DVD contains the maximum  
number of titles (HDD: 600, DVD+RW/-RW: 49), you  
cannot divide any titles.  
• With DVD+RW/-RW, you cannot divide the titles if the  
total number of chapters has already reached 254.  
• When you search for a point at step 2, you can also  
use the special playback functions such as [G],  
[D] etc.  
• For DVD, it may start writing data to the disc as you  
complete the editing procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90 EN  
EDITING  
Deleting a Scene of a Title  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
You can delete a specific part of a title.  
1
2
OPEN/  
Use [K / L] to select “Scene Delete”,  
then press [OK].  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Edit  
Scene Delete  
1
CHANNEL  
Edit Title Name  
Chapter Mark  
Title Dividing  
Protect  
PQRS  
SPACE  
AUDIO  
CLEAR  
JAN/ 4/10 12:00AM CH10 LP  
1 : 05 : 00  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Play back the title up to the point  
where you want to set a start point  
for the scene to be deleted, then  
press [OK].  
3
4
OK  
DISPLAY  
RETURN  
Edit - Scene Delete  
V.REPLAY  
V.SKIP  
Start  
1
End  
Preview  
Delete  
RAPID PLAY  
JAN/ 4/10 12:00AM CH10 LP  
1 : 20 : 00  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Start point is now set, and the highlight  
automatically moves to “End”.  
REC MODE  
Play back the title up to the point  
where you want to set an end point,  
then press [OK].  
Edit - Scene Delete  
Start  
1
End  
Preview  
Delete  
JAN/ 4/10 12:00AM CH10 LP  
1 : 30 : 00  
End point is now set, and the highlight  
automatically moves to “Preview”.  
The portion for deletion is indicated in red in the  
progress bar at the bottom of the screen.  
Note  
• When you search for the start/end point at step 3/4,  
you can also use the special playback functions such  
as [G], [D] etc.  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 91  
EDITING  
With “Preview” highlighted, press  
Use [K / L] to select “Yes” then press  
[OK].  
[OK] to preview the result.  
Before and after 5 seconds of the deleted scene  
5
can be previewed every time you press [OK].  
7
8
Edit - Scene Delete  
• If you are not satisfied with the result, use  
[K / L] to go back to “Start” or “End”, and try  
setting them again.  
• If you are satisfied with the result, proceed to  
step 6.  
Yes  
1
No  
JAN/ 4/10 12:00AM CH10 LP  
1 : 30 : 00  
start point end point  
Before  
editing  
Final confirmation message will appear. Select  
“Yes” using [K / L] and then press [OK].  
The selected scene is now deleted.  
Edited  
Press [RETURN] once or repeatedly to  
go back to the title list.  
Use [K / L] to select “Delete” then  
press [OK].  
6
Edit - Scene Delete  
Start  
1
End  
Preview  
Delete  
JAN/ 4/10 12:00AM CH10 LP  
1 : 30 : 00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
92 EN  
EDITING  
Protecting a Title  
To prevent the accidental editing, or erasing of the titles,  
you can protect them in “Edit” menu.  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
1
2
Use [K / L] to select “Protect”, then  
press [OK].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Edit  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Scene Delete  
1
CHANNEL  
Edit Title Name  
Chapter Mark  
Title Dividing  
Protect  
PQRS  
SPACE  
AUDIO  
CLEAR  
JAN/ 1/10 12:00AM CH10 LP  
1 : 30 : 00  
SETUP  
REPEAT  
HDMI  
TITLE  
With “OFF ON” selected, press  
[OK].  
DISC MENU  
3
4
Edit - Protect  
OK  
OFF  
ON  
1
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
JAN/ 1/10 12:00AM CH10 LP  
1 : 30 : 00  
RAPID PLAY  
The title is now protected.  
• If the title is already protected, “ON OFF” will  
appear instead. Press [OK], to release the title  
from protection.  
• The protected title will be marked with  
icon.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Press [RETURN] once or repeatedly to  
go back to the title list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 93  
EDITING  
Hiding Chapters  
You can hide chapters from the title list.  
Hidden chapters are skipped during playback.  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
1
2
3
4
Use [K / L] to select “Hide Chapter”,  
then press [OK].  
Submenu will appear.  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [H] / [G] to go to the chapter  
you want to hide, then press  
[PAUSE F].  
PQRS  
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select “Hidden”, then  
press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
Edit - Hide Chapter  
DISC MENU  
Visible  
1
Hidden  
Chapter  
2/  
3
Visible  
OK  
DISPLAY  
RETURN  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
V.REPLAY  
V.SKIP  
The chapter is now hidden.  
Press [RETURN] once or repeatedly to  
RAPID PLAY  
go back to the title list.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Data will be written onto the disc momentarily.  
5
This operation may take a  
while to be completed.  
REC MODE  
If you want hidden chapters to be “Visible”,  
select the chapter to be shown. Then use  
[K / L] to select “Visible” at the step 4 on this  
page.  
Data will be written onto the disc momentarily.  
After that, title list is displayed.  
Note  
• ”Hidden” will be displayed in the preview window  
while previewing the hidden chapter.  
• When you make all chapters in the title “Hidden”,  
“Hidden” is displayed on an index picture of the title  
list.  
SP(2Hr)  
1
Hidden  
NOV/21/10 11:00AM CH12 SP  
NOV/21/10 0:20:44  
2
NOV/22/10 11:35AM CH13 EP  
NOV/22/10 0:10:33  
3
EMPTY TITLE  
1:37:52 SP (2Hr)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
94 EN  
EDITING  
Setting an Index Picture  
You can set your desired scene as an index picture for  
each title.  
Follow steps in “How to Access the  
Edit Menu” on page 82 to display  
“Edit” menu.  
1
2
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Play back the title to find the scene  
you want to use as an index picture.  
When it comes to the desired point,  
press [PAUSE F].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
PQRS  
Use [K / L] to select “Index Picture”,  
then press [OK].  
SPACE  
AUDIO  
CLEAR  
3
SETUP  
REPEAT  
HDMI  
TITLE  
Use [K / L] to select “Yes”, then press  
[OK].  
DISC MENU  
4
Edit - Index Picture  
Yes  
1
No  
OK  
DISPLAY  
RETURN  
F
V.REPLAY  
V.SKIP  
NOV/21/10 11:00AM CH12 SP  
1 : 05 : 00  
A new index picture is now set.  
RAPID PLAY  
Press [RETURN] once or repeatedly to  
go back to the title list.  
Data will be written onto the disc momentarily.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
5
This operation may take a  
while to be completed.  
Note  
• If the selected picture for an index picture is  
overwritten, the index picture is reset to the first  
scene of the title.  
• When you search for the point at step 2, you can also  
use the special playback functions such as [G],  
[D] etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 95  
EDITING  
Putting Name on Disc  
Press [STOP C] if you are playing back a disc.  
You can put a name on the disc and change it from this  
menu.  
Press [SETUP].  
1
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
2
CHANNEL  
Use [K / L] to select “Edit Disc Name”,  
then press [OK].  
e.g.) DVD+RW  
PQRS  
3
SPACE  
AUDIO  
CLEAR  
Disc Edit  
SETUP  
REPEAT  
HDMI  
TITLE  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect OFF  
ON  
DISC MENU  
A window for entering a title name will appear.  
Edit Disc Name  
OK  
A
a
B
b
2
!
C
c
3
?
DISPLAY  
RETURN  
No Disc Name  
1
Disc  
DVD+RW  
3
@
Total Titles  
V.REPLAY  
V.SKIP  
Disc Space Used  
Disc Protect  
0:30:48  
OFF  
Make Edits Compatible  
Needed  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
To enter a disc name, follow the steps  
of “Guide to Edit Title Name” on page  
86.  
REC MODE  
4
5
When you finish entering a title name, press  
[OK].  
Use [K / L] to select “Yes”, then press  
[OK].  
Data will be written onto the disc momentarily.  
This operation may take a  
while to be completed.  
The disc name is now updated.  
Note  
• You cannot select “Disc Edit” when finalized DVD+R  
or DVD-R is inserted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
96 EN  
EDITING  
Erasing Disc  
Press [STOP C] if you are playing back a disc.  
You can erase all titles on a disc.  
Press [SETUP].  
OPEN/  
1
2
3
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
PQRS  
Use [K / L] to select “Erase Disc”,  
then press [OK].  
e.g.) DVD+RW  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
Disc Edit  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
DISC MENU  
Disc Protect OFF  
ON  
OK  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
Use [K / L] to select “Yes”, then press  
[OK].  
RAPID PLAY  
4
When you press “Yes”, all the  
contents in the disc will be erased.  
Are you sure to erase the disc?  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Yes  
No  
REC MODE  
Data will be written onto the disc momentarily.  
This operation may take a  
while to be completed.  
The contents of the disc is now deleted.  
Note  
• When you select “Yes” at step 4, all contents of the  
disc will be erased.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 97  
EDITING  
Making Edits Compatible  
Press [STOP C] if you are playing back a disc.  
If you have added or deleted chapters, or made chapters  
hidden, you must perform “Make Edits Compatible” to  
see those effects on other unit.  
Press [SETUP].  
1
OPEN/  
Use [K / L] to select “Disc Edit”, then  
press [OK].  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
2
CHANNEL  
Use [K / L] to select “Make Edits  
Compatible”, then press [OK].  
PQRS  
3
Disc Edit  
SPACE  
AUDIO  
CLEAR  
Edit Disc Name  
Erase Disc  
Make Edits Compatible  
Disc Protect OFF  
ON  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
OK  
DISPLAY  
RETURN  
Use [K / L] to select “Yes”, then press  
[OK].  
V.REPLAY  
V.SKIP  
4
Activate the Make Edits Compatible?  
Yes  
No  
RAPID PLAY  
Data will be written onto the disc momentarily.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
This operation may take a  
while to be completed.  
REC MODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
98 EN  
EDITING  
Deleting All Titles in HDD  
Press [STOP C] if you are playing back a disc.  
Press [SETUP].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
2
3
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “HDD Menu”,  
then press [OK].  
CHANNEL  
PQRS  
Use [K / L] to select the desired type  
of deletion, then press [OK].  
Select “Delete All Unprotected Titles” if you want  
to delete only the unprotected titles.  
Select “Delete All Titles” if you want to delete all  
titles including the ones protected.  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
HDD Menu  
OK  
Delete All Titles  
Delete All Unprotected Titles  
DISPLAY  
RETURN  
V.REPLAY  
V.SKIP  
RAPID PLAY  
Use [K / L] to select “Yes”, then press  
[OK].  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
4
Delete entire titles?  
Yes  
No  
Final confirmation message will appear. Select  
“Yes”, then press [OK].  
Titles are now deleted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 99  
LIST OF SETTINGS  
The following table is the contents which you can set and the default setting.  
Refer to the following table for useful operation.  
Setup  
Items (highlight is the default)  
Contents  
Playback  
Pages 103-106  
Parental Lock  
Set the parental level for DVD playback.  
OFF  
level 8 [Adult] to 1 [Kid Safe]  
Disc Audio  
Dynamic Range  
Control  
Compressing the range of sound volume.  
ON  
OFF  
PCM  
Set whether the sound recorded in 96kHz will  
be down sampled in 48kHz.  
48kHz  
96kHz  
PCM  
Dolby Digital  
Set the type of sound signal which outputs  
from the digital audio output jack.  
Stream  
Disc Menu Language  
Set the language for disc menu language.  
English  
French  
Spanish  
Other  
Audio Language  
Set the language for audio.  
Original  
English  
French  
Spanish  
Other  
Subtitle Language  
Set the language for subtitles.  
OFF  
English  
French  
Spanish  
Other  
Angle Icon  
Still Mode  
Set whether or not to display the angle icon.  
Set the type of still image in pausing playback.  
ON  
OFF  
Auto  
Field  
Frame  
Variable Skip/Replay  
Variable Skip  
5 seconds  
Set the amount of skip time when you press  
[V.SKIP].  
15 seconds  
30 seconds  
1 minute  
5 minutes  
Variable Replay  
5 seconds  
Set the amount of rewind time when you  
press [V.REPLAY].  
15 seconds  
30 seconds  
1 minute  
5 minutes  
Display  
Pages 107-109  
OSD Language  
Screen Saver  
Set the language for OSD (on-screen display).  
English  
Français  
Español  
OFF  
1 minute  
5 minutes  
Set the idling time before the screen saver  
starts.  
10 minutes  
15 minutes  
Auto  
Bright  
Dark  
FL Dimmer  
Set the brightness of the front panel display.  
Set the type of the DTV closed caption.  
DTV CC  
Caption Service  
page 38  
OFF  
Service1  
Service2  
Service3  
Service4  
Service5  
Service6  
Recording  
ON  
OFF  
Set whether to record the DTV closed caption  
or not.  
page 43  
CC Style  
pages 39-40  
User Setting  
ON  
OFF  
Set the CC style setting whether or not is  
effective.  
Font Size  
Set font size of the displayed caption.  
Large  
Middle  
Small  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100 EN  
LIST OF SETTINGS  
Setup  
Display  
Pages 107-109  
Items (highlight is the default)  
CC Style Font Style  
pages 39-40  
Contents  
Set font style of the displayed caption.  
Style1  
Style2  
Style3  
Style4  
Style5  
Style6  
Style7  
Style8  
Font Opacity  
Font Color  
Set the font opacity of the displayed caption.  
Set the font color of the displayed caption.  
Solid  
Transparent  
Translucent  
Flash  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Edge Type  
Edge Color  
Set edge type of the displayed caption.  
Set edge color of the displayed caption.  
None  
Raised  
Depressed  
Uniform  
L.Shadow  
R.Shadow  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Back Opacity  
Back Color  
Set back opacity of the displayed caption.  
Set back color of the displayed caption.  
Solid  
Transparent  
Translucent  
Flash  
White  
Black  
Red  
Green  
Blue  
Yellow  
Magenta  
Cyan  
V-Chip  
MPAA Rating  
TV Rating  
X
Set the viewing limitation according to US  
movie ratings.  
NC-17  
R
PG-13  
PG  
G
NR  
TV-MA  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
None  
Set the viewing limitation according to US TV  
program ratings.  
Canadian  
English Rating  
18+  
14+  
PG  
G
Set the viewing limitation according to  
Canadian English language ratings.  
C8+  
C
E
Canadian French 18ans+  
Set the viewing limitation according to  
Canadian French language ratings.  
Rating  
16ans+  
13ans+  
8ans+  
G
E
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 101  
LIST OF SETTINGS  
Setup  
Items (highlight is the default)  
Contents  
Display  
Pages 107-109  
V-Chip  
Downloadable  
Rating  
Block Setting  
To set the rating.  
Clear Downloadable  
Rating  
Clear the downloadable rating information  
and its setting.  
Change  
Password  
Change the password.  
Video  
Pages 110-111  
Progressive Scan  
TV Aspect  
ON  
Set to the progressive scan mode (set to "ON")  
or to the interlace scan mode(set to "OFF").  
OFF  
Set a picture size according to aspect ratio of  
your TV.  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
Video Input  
Page 54  
L1(Rear)  
Set the video input type for the external input.  
Insert chapter marks at even time interval.  
Video In  
S-Video In  
Video In  
L2(Front)  
S-Video In  
Recording  
Auto Chapter  
Page 43  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
60 minutes  
Auto Finalize  
Page 64  
Disc Full  
ON  
OFF  
Set the unit to finalize the disc automatically.  
End of Timer Rec ON  
OFF  
Make Recording Compatible  
Page 43  
ON  
OFF  
Set to prohibiting additional recording (OFF)  
or to replace the title list after recording (ON).  
Clock  
Pages 32-34  
Clock Setting  
Auto Clock Setting  
Set the clock.  
Set the clock automatically.  
OFF  
Auto  
Manual  
Daylight Saving Time  
Auto Channel Preset  
Manual Channel Preset  
Set the clock for the daylight saving time.  
Tune the channels automatically.  
Tune the channels manually.  
ON(MAR-NOV)  
ON(APR-OCT)  
OFF  
Channel  
Pages 29-31  
Antenna  
Cable (Analog)  
Cable (Analog/Digital)  
TV Audio Select  
Page 37  
Set the analog TV audio type for output and  
recording.  
Stereo  
SAP  
HDMI  
Page 112  
Format  
Set the color space for the HDMI output.  
RGB  
YCbCr  
HDMI Audio  
RGB Range  
HDMI Control  
Set whether to output the HDMI audio signal  
or not.  
ON  
OFF  
Set the black-white contrast level for HDMI  
RGB output.  
Normal  
Enhanced  
ON  
OFF  
Set whether to utilize the HDMI control.  
Reset All  
Page 113  
Yes  
No  
Set to the default setting.  
Note  
• Your change to each setting stays on even when the power is off.  
• An item which is not currently available is grayed in the settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
102 EN  
SETUPS  
Playback  
Press [STOP C] if you are playing back a disc.  
Press [SETUP] and use [K / L] to  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
select “General Setting”, then press  
1
2
[OK].  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
“General Setting” menu will appear.  
CHANNEL  
Use [K / L] to select “Playback”, then  
press [OK].  
PQRS  
General Setting  
SPACE  
AUDIO  
CLEAR  
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
Reset All  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
OK  
DISPLAY  
RETURN  
Use [K / L] to select a desired item,  
then press [OK].  
V.REPLAY  
V.SKIP  
3
Parental Lock  
Disc Audio  
Disc Menu Language  
Audio Language  
Subtitle Language  
Angle Icon  
1
2
3
4
5
6
7
8
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
Still Mode  
Variable Skip / Replay  
REC MODE  
Submenu will appear.  
Refer to  
and set the selected item.  
to  
on pages 104-106  
1
8
4
5
When you finish with setting, press  
[SETUP] to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 103  
SETUPS  
Playback (cont’d)  
Parental Lock (Default: OFF)  
(DVD only)  
A password has not been set yet.  
1
A
Some DVD-video feature a parental lock level. Playback  
will stop if the ratings exceed the levels you set, it will  
require you to enter a password before the disc will  
playback. This feature prevents your children from  
viewing inappropriate material.  
Use [K / L] to select “Yes”. Use [the Number buttons]  
to enter a new password except for 4737, then press  
[OK].  
Change Password?  
Password Input  
Yes  
No  
Use [K / L] to select the desired level, then press [OK].  
Yes  
Parental Lock  
Your setting will be activated.  
A password has been set already.  
OFF  
8 [Adult]  
7 [NC 17]  
6 [R]  
5 [PG R]  
4 [PG 13]  
3 [PG]  
B
• Use [the Number buttons] to enter the current  
password.  
Password Input  
2 [G]  
1 [Kid Safe]  
If a password has not been set yet, proceed to  
If a password has been set already, proceed to  
.
.
A
B
Your setting will be activated.  
• If you want to change password, use [K / L] to select  
“Yes”. Use [the Number buttons] to enter a new  
password except for 4737, then press [OK].  
Note  
• Parental lock function may not be available to some  
discs.  
<change the password>  
• With some DVD, it may be difficult to find if they are  
compatible with parental lock. Be sure to check if the  
parental lock function operates in the way that you  
have set.  
Change Password?  
Password Input  
Yes  
No  
Yes  
Your setting will be activated.  
• Record the password in case you forget it.  
• If there is a DVD in the unit when you set up the  
parental lock, press [OPEN/CLOSE A] to activate the  
parental lock level.  
Note  
• Press [CLEAR] to erase numbers entered incorrectly.  
• When you forget the password or you want to clear  
all settings in “Parental Lock” menu, enter 4737 using  
[the Number buttons] in password input window.  
Password will be cleared and parental levels will be  
set to “OFF”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
104 EN  
SETUPS  
Playback (cont’d)  
Disc Audio  
Dolby Digital (Default : Stream)  
2
C
Choose the appropriate audio setting for your external  
device.  
Use [K / L] to select a setting, then press [OK].  
Dolby Digital  
It will only affect a disc playback.  
PCM  
Stream  
Use [  
K
/
L] to select a desired item, then press [OK].  
Your setting will be activated.  
Disc Audio  
A
PCM  
: Converts the Dolby Digital into PCM (2 channel).  
When your amplifier/decoder is NOT  
Dynamic Range Control  
PCM  
Dolby Digital  
B
compatible with Dolby Digital, set to “PCM”.  
C
Stream : Outputs Dolby Digital signals  
When your amplifier/decoder is compatible  
with Dolby Digital, set to “Stream”.  
Dynamic Range Control (Default : ON) (DVD only)  
A
Set to “ON” to compress the range between soft and loud  
sounds.  
Use [K / L] to select a setting, then press [OK].  
• With regard to DVD playback, if the audio source is in  
Dolby Digital format, set “Dolby Digital” to “PCM” so that  
you can switch to main audio (L), sub audio (R), or a  
combination of both (L/R) using your  
Dynamic Range Control  
amplifier/decoder.  
ON  
OFF  
Disc Menu Language (Default : English) (DVD only)  
3
Your setting will be activated.  
Set the language for disc menu.  
Use [K / L] to select a setting, then press [OK].  
Note  
• Dynamic range control function is available only with  
the titles which are recorded in the Dolby Digital  
format.  
Disc Menu Language  
English  
French  
Spanish  
Other  
PCM (Default : 48kHz)  
B
Your setting will be activated.  
Use [K / L] to select a setting, then press [OK].  
PCM  
Audio Language (Default : Original) (DVD only)  
4
48kHz  
96kHz  
Set the audio language.  
Use [K / L] to select a setting, then press [OK].  
Your setting will be activated.  
Audio Language  
48kHz : If your amplifier/decoder is NOT compatible  
with 96kHz PCM, select “48kHz”. 96kHz sound  
will be output in 48kHz.  
96kHz : If your amplifier/decoder is compatible with  
96kHz PCM, select “96kHz”. 96kHz sound will  
be output.  
Original  
English  
French  
Spanish  
Other  
Your setting will be activated.  
• When “Original” is selected, the audio language will be  
in the disc’s default language.  
Note  
When playing back disc with copyright protection  
• Even if you select “96kHz”, the sound will be down  
sampled at 48kHz.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 105  
SETUPS  
Playback (cont’d)  
Subtitle Language (Default : OFF) (DVD only)  
Still Mode (Default : Auto)  
(DVD only)  
5
7
Set the subtitle language.  
Select “Auto” usually.  
Use [K / L] to select a setting, then press [OK].  
Use [K / L] to select a setting, then press [OK].  
Still Mode  
Subtitle Language  
Auto  
OFF  
Field  
Frame  
English  
French  
Spanish  
Other  
Your setting will be activated.  
Auto  
: Optimum resolution setting (“Field” or  
“Frame”) will be selected.  
Your setting will be activated.  
Field  
: Images in the still mode will be stabilized.  
If “Other” is selected for  
to  
, press 4-digit code  
3
5
Frame : Images in the still mode will be highly defined.  
using [the Number buttons].  
Note  
Code Input  
•
Frame is 1 completed video image made up of 2  
-
-
-
-
fields (There are 30 frames per second of NTSC video).  
• When you finish entering the code, press [OK]. Refer  
to the language code table on page 119.  
Variable Skip / Replay  
8
Assign [V.SKIP] or [V.REPLAY] to skip or rewind by a  
certain amount of time when they are pressed.  
Use [K / L] to select a desired item, then press [OK].  
Note  
• Only the languages supported by the disc can be  
selected.  
• Audio language setting may not be available to  
some discs.  
• You can change or switch off the subtitles on a DVD  
also from the disc menu if it is available.  
Variable Skip  
Variable Replay  
A
B
Refer to the explanations below and set the selected item.  
• Press [CLEAR] or [s] to erase numbers entered  
incorrectly.  
Variable Skip (Default: 30 seconds)  
A
Sets the amount of skip time for [V.SKIP].  
Variable Skip  
Angle Icon (Default : ON)  
(DVD only)  
6
5 seconds  
15 seconds  
30 seconds  
1 minute  
Set to “ON” to show the angle icon during the playback.  
Use [K / L] to select a setting, then press [OK].  
5 minutes  
Angle Icon  
ON  
OFF  
Variable Replay (Default: 30 seconds)  
B
Sets the amount of rewind time for [V.REPLAY].  
Your setting will be activated.  
Variable Replay  
5 seconds  
15 seconds  
30 seconds  
1 minute  
5 minutes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
106 EN  
SETUPS  
Display  
Press [STOP C] if you are playing back a disc.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
[OK].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
2
3
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [K / L] to select “Display”, then  
press [OK].  
PQRS  
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select a desired item,  
then press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
OSD Language  
Screen Saver  
FL Dimmer  
DTV CC  
CC Style  
V-Chip  
1
2
3
4
5
6
DISC MENU  
OK  
DISPLAY  
RETURN  
Selection menu will appear.  
V.REPLAY  
V.SKIP  
Refer to  
and set the selected item.  
to  
on pages 107-109  
1
6
4
5
• For  
and  
refer to pages 38-40.  
4
5
RAPID PLAY  
When you finish with setting, press  
[SETUP] to exit.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
OSD Language (Default : English)  
1
Set the language for the on-screen display.  
Use [K / L] to select a setting, then press [OK].  
OSD Language  
English  
Français  
Español  
Your setting will be activated.  
Screen Saver (Default : 10 minutes)  
2
Set the time to activate the screen saver function on the  
TV screen.  
Use [K / L] to select a setting, then press [OK].  
Screen Saver  
OFF  
1 minute  
5 minutes  
10 minutes  
15 minutes  
Your setting will be activated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 107  
SETUPS  
Display (cont’d)  
FL Dimmer (Default: Bright)  
MPAA Rating  
3
A
B
C
D
Set the front panel display brightness.  
Use [K / L] to select a setting, then press [OK].  
TV Rating  
Canadian English Rating  
Canadian French Rating  
FL Dimmer  
Auto  
Bright  
Dark  
You can set the viewing limitation according to MPAA  
rating (US movie ratings), TV Rating (US TV program  
ratings), Canadian English Rating (Canadian English  
language Ratings), Canadian French Rating (Canadian  
French language Ratings).  
You can choose one from “Auto”, “Bright” and “Dark”.  
If “Auto” is selected, the display gets dark when the  
power is in the standby mode.  
V-Chip  
6
1) Use [K / L] to select the desired rating, then press  
[OK] repeatedly to switch between view and block.  
When it is blocked a key icon will appear.  
With the V-chip system in this unit, you can set the  
viewing limitation for the analog/digital TV programs  
received from the tuner or recorded on DVDs to prevent  
your children from watching inappropriate programs. If  
the unit detects a blocked program, a restriction message  
appears and you are not allowed to view or record the  
program.  
e.g.) MPAA rating  
MPAA Rating  
X
NC-17  
R
PG-13  
PG  
G
1) Use [the Number buttons] to enter the access  
password.  
NR  
If you have not set the password, first, use  
[the Number buttons] to set the access password,  
then press [OK]. The number you entered will be stored  
as the access password.  
[MPAA Rating]  
Rating  
Category  
Mature audience only  
X
higher  
Password Input  
NC-17  
No one under 17 admitted  
Restricted; under 17 requires  
accompanying parent or adult guardian  
R
2) Use [K / L] to select a desired item, then press [OK].  
PG-13  
PG  
Unsuitable for children under 13  
Parental guidance suggested  
General audience  
V-Chip  
A
MPAA Rating  
TV Rating  
Canadian English Rating  
Canadian French Rating  
Downloadable Rating  
Change Password  
B
G
lower  
C
D
E
NR  
No rating  
[TV Rating]  
F
Rating  
TV-MA  
TV-14  
TV-PG  
TV-G  
Category  
Mature audience only  
higher  
Unsuitable for children under 14  
Parental guidance suggested  
General audience  
TV-Y7  
TV-Y  
Appropriate for all children 7 and older  
Appropriate for all children  
No rating  
lower  
None  
[Canadian English Rating]  
Rating  
Category  
18+  
14+  
PG  
G
Adult audience only  
higher  
Unsuitable for ages under 14  
Parental guidance suggested  
General audience  
C8+  
C
For children over 8  
For all children  
lower  
E
Exempt program  
Download from Www.Somanuals.com. All Manuals Search And Download.  
108 EN  
SETUPS  
Display (cont’d)  
[Canadian French Rating]  
Rating  
Downloadable Rating  
E
Category  
Set the rating system via digital broadcasting, or clear the  
downloaded ratings.  
If the broadcasting signal does not have the  
downloadable rating information, the message below  
will appear.  
18ans+  
16ans+  
13ans+  
8ans+  
G
Adult audience only  
higher  
lower  
Unsuitable for ages under 16  
Unsuitable for ages under 13  
Unsuitable for ages under 8  
General audience  
Downloadable Rating is currently not available.  
E
Exempt program  
• This message will also appear when you try to access  
“Downloadable Rating” after you have cleared the  
downloadable rating information, and the new information has  
not been downloaded since.  
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you  
can further set the sub ratings to block specific  
elements of programming. Press [K /L/ { /B] to select  
the desired rating or sub rating, then press [OK]  
repeatedly to switch between view and block. Sub  
rating status will appear on the side of the main rating.  
To set the rating:  
Use [K / L] to select “Block Setting” then press [OK] to  
show the various types of ratings. Use [K / L] to select a  
desired rating to set, then press [OK] to show the levels  
for the rating. Use [K / L] to select a level, then press  
[OK] to switch between view or block. If you set one level  
to block, a key icon will appear and all the higher levels  
will be blocked automatically.  
To clear the downloadable rating information and its  
setting:  
Use [K / L] to select “Clear Downloadable Rating”, then  
press [OK].  
TV Rating  
FV  
V
S
L
D
TV-MA  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
None  
Change Password  
F
Sub Rating  
Category  
Fantasy Violence  
Rating  
TV-Y7  
FV  
V
Change the current password.  
Use [the Number Buttons] to enter new access  
password.  
Violence  
TV-PG  
TV-14  
TV-MA  
S
Sexual Situation  
Coarse Language  
Suggestive Dialogue  
L
Note  
D
TV-PG, TV-14  
• When you forget the access password at step 1),  
enter 4737 using [the Number buttons] in the  
password input window. Password will be cleared.  
Note  
• Changing the main rating to block or view  
automatically changes all its sub ratings to the same  
(block or view).  
• Depending on the type of rating system, you may set  
the levels individually.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 109  
SETUPS  
Video  
Press [STOP C] if you are playing back a disc.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
[OK].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
1
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
CHANNEL  
Use [K / L] to select “Video”, then  
press [OK].  
PQRS  
2
SPACE  
AUDIO  
CLEAR  
Use [K / L] to select a desired item,  
then press [OK].  
SETUP  
REPEAT  
HDMI  
TITLE  
3
DISC MENU  
1
2
3
Progressive Scan  
TV Aspect  
Video Input  
OK  
Submenu will appear.  
DISPLAY  
RETURN  
Refer to  
the selected item.  
to  
on page 111 and set  
1
2
V.REPLAY  
V.SKIP  
4
5
• For  
refer to page 54.  
3
RAPID PLAY  
When you finish with setting, press  
[SETUP] to exit.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
110 EN  
SETUPS  
Video (cont’d)  
TV Aspect (Default: 4:3 Letter Box)  
Progressive Scan (Default : OFF)  
2
1
Use this feature to adjust the aspect ratio of the video  
source which is different from your TV’s ratio to fit your TV  
monitor without distorting the picture.  
This unit is compatible with the progressive scan system.  
The feature provides you with the higher definition  
images than the traditional output system does. To utilize  
this feature, you must set progressive scan mode to “ON”.  
Use [K / L] to select a setting, then press [OK].  
1) Use [K / L] to select “ON“, then press [OK].  
TV Aspect  
Progressive Scan  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
ON  
OFF  
If you have a standard TV:  
2) Use [{ / B] to select “Yes“, then press [OK].  
Select “4:3 Letter Box”, so that black bars appear on the  
top and bottom of the TV screen when playing back a  
wide-screen picture. Select “4:3 Pan & Scan” for a full  
height picture with both sides trimmed when playing  
back wide-screen picture.  
Activating progressive scan:  
Check your TV has progressive scan  
and connect with component video cable.  
If you have a widescreen TV:  
NOTE :  
Select “16:9 Wide”.  
If there is no picture or picture is  
distorted after selecting “Yes”,  
Wait about 15 seconds for auto recovery.  
Activate?  
Yes  
No  
3) Use [K / L] to select “Yes“ within 15 seconds, then  
press [OK].  
Your setting will be activated.  
Note  
• If your TV is compatible with progressive scan  
(525p/480p), you are recommended to use the HDMI  
or component video cable (commercially available)  
to connect this unit to the TV. (Refer to pages 17-18.)  
If not, use the RCA video cable and set the  
progressive scan to “OFF” or press and hold [SETUP]  
for more than 3 seconds during HDD/DVD playback.  
• When selecting “No” or not pressing any buttons on the  
unit or remote control within 15 seconds at step 3),  
progressive scan remains to be “OFF” (interlace scan).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 111  
SETUPS  
HDMI  
Set the appropriate color space for your display device.  
Use [K / L] to select a setting, then press [OK].  
OPEN/  
• When the connected device is not compatible with the Y/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
Cb/Cr, HDMI signal is output as RGB regardless of the setting.  
Format  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
RGB  
YCbCr  
CHANNEL  
Your setting will be activated.  
PQRS  
HDMI Audio (Default : ON)  
2
SPACE  
AUDIO  
CLEAR  
If you do not want to output the audio through HDMI  
(when you digitally output the audio through the  
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio  
system, etc.), you can set the HDMI audio output off.  
SETUP  
REPEAT  
HDMI  
TITLE  
DISC MENU  
Use [K / L] to select a setting, then press [OK].  
• Set to “OFF” when the HDMI sound is not output.  
HDMI Audio  
OK  
ON  
DISPLAY  
RETURN  
OFF  
Your setting will be activated.  
V.REPLAY  
V.SKIP  
RGB Range (Default : Normal)  
3
You can adjust the RGB range to make the dark areas of  
the HDMI images brighter.  
RAPID PLAY  
Use [K / L] to select a setting, then press [OK].  
• Select “Enhanced“ if the black-white contrast is not clear.  
• This setting is effective only for HDMI RGB output.  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
RGB Range  
Normal  
Enhanced  
Press [SETUP] in stop mode and use  
[K / L] to select “General Setting”,  
then press [OK].  
Your setting will be activated.  
1
2
HDMI Control (Default : OFF)  
4
Use [K / L] to select “HDMI”, then  
HDMI Control  
press [OK].  
Playback  
Display  
Video  
Recording  
Clock  
Channel  
HDMI  
ON  
OFF  
HDMI control allows integrated system control over HDMI  
and is part of the HDMI standard.  
When “HDMI Control” setting is set to “ON”, functions  
listed below will be available.  
Reset All  
• You cannot select HDMI when an HDMI cable is not  
connected and the items are shown in grey color.  
One Touch Play  
When this unit is turned on, the TV also is turned on  
and the appropriate external input channel will be  
selected automatically. The appropriate external input  
channel can also be selected on your TV automatically,  
when you press [PLAY B], [G], [H,], [DISC MENU],  
[TIMER], [DTV/TV], [SETUP], [CHANNEL  
[the Number buttons] or [D. DUBBING] when the  
Use [K / L] to select a desired item,  
then press [OK].  
3
4
/
],  
Format  
HDMI Audio  
RGB Range  
HDMI Control  
1
2
unit’s power is on.  
Standby  
3
4
When you press and hold [STANDBY-ON y] for 2  
seconds, it turns off the power to the standby mode of  
the TV first and then turns the power of this unit also.  
When you finish with the setting,  
press [SETUP] to exit.  
System Information  
Get & Set Menu Language  
This unit recognizes the OSD language set for the TV  
and automatically sets the same language as the player  
menu language (OSD menu language) for this unit.  
Format (Default : RGB)  
1
You can select the color space for HDMI output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
112 EN  
SETUPS  
Reset All  
Reset the setting to default.  
Press [SETUP] and use [K / L] to  
select “General Setting”, then press  
1
[OK].  
OPEN/  
STANDBY-ON DTV/TV  
SOURCE  
CLOSE  
“General Setting” menu will appear.  
.@/:  
GHI  
ABC  
JKL  
TUV  
DEF  
MNO  
WXYZ  
Use [K / L] to select “Reset All”, then  
press [OK].  
CHANNEL  
2
PQRS  
Select “Yes” using [K / L] , then press  
[OK].  
SPACE  
AUDIO  
CLEAR  
SETUP  
REPEAT  
HDMI  
TITLE  
3
Reset to factory default?  
Yes  
No  
DISC MENU  
OK  
Select “Yes” again using [K / L] , then  
press [OK].  
DISPLAY  
RETURN  
4
Are you sure?  
V.REPLAY  
V.SKIP  
Yes  
No  
Your setting in recording will be initialized.  
RAPID PLAY  
D.DUBBING  
TIMER  
HDD  
DVD  
REC  
REC MODE  
Note  
• The settings listed below will remain unchanged  
even after resetting to the factory default.  
– OSD language setting  
– Channel setting  
– Clock setting  
– Parental lock setting  
– V-chip setting  
– Timer programming information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 113  
TROUBLESHOOTING  
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.  
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.  
Symptom  
Remedy  
The power does not turn on.  
• Check that the AC power cord is connected securely.  
• Batteries of the remote control are weak.  
The unit turns on automatically  
without any operation.  
• The unit turns on automatically 2 seconds before the timer recording.  
The OSD language menu appears  
every time the power turns on.  
• The unit may not have been turned off correctly. Finish up the language setting  
procedure by selecting a language in the OSD language menu. Press [OK] to activate  
the setting, then press [STANDBY-ON y] to turn the unit to the standby mode.  
Do not disconnect the AC power cord before placing the unit in the standby mode.  
The unit does not function.  
• “ ” or error message appears if the operation is prohibited.  
• Batteries of the remote control are weak or exhausted.  
No picture, sound or menu appears on • Check if the connections are made securely and correctly.  
the screen.  
• Check if the cables are damaged.  
Check if a correct external input channel is selected on your TV. (Refer to page 22.)  
•
• Check if you have completed the channel setting. (Refer to pages 29-31.)  
• While the setup menu or timer programming display is shown, or while the  
screen saver is active, the audio is muted.  
Clock setting and channel setting  
cannot be performed.  
• If a recording is in progress, these operations cannot be performed.  
Time jumps/Auto Clock set’s incorrect • Set the “Auto Clock Setting” to “OFF” on page 102 and try “Manual  
time.  
Clock Setting” on page 34.  
The unit does not operate properly.  
•
Moisture has condensed inside the unit. Remove the disc and leave the unit  
turned on for about 2 hours until the moisture evaporates. (Refer to page 3.)  
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,  
formatting or editing (even after “Repairing” disappears), a repairing  
process will begin automatically just after turning the unit on again.  
It may take several minutes up to about several hours.  
Repairing  
In case you intend to cancel the  
repairing process.  
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]  
on the front panel, then select “Yes” and press [OK]. After that, press  
[OPEN/CLOSE A] to take out the disc. The disc cancelled during the  
repairing process MAY NOT work.  
Do you want to cancel a repairing  
process? When selecting “Yes”,  
the disc may not be usable.  
Yes  
No  
Repairing  
The clock display does not appear in  
the front panel display.  
• Check that the AC power cord is connected securely.  
• (In case of power failure) Check the breaker and clock setting.  
When you forget the password for  
parental lock.  
• Please cancel the password and the set level. (Refer to page 104.)  
No analog TV closed captions are  
output.  
• If you are using HDMI connection to watch the TV programs through  
this unit, analog TV closed caption cannot be output. Try using another  
output connection to the TV.  
DV signal cannot be input.  
• Before connection, turn on the power supplies for both this unit and the  
DVC, and make sure that these units have stopped.  
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other  
types of signals are not supported.  
• Do not connect any device other than the DVC. Even if a recorder or PC  
with another DV terminal is connected, the DV function will not operate.  
• If the DVC is not recognized after connection, turn off the power supply  
for the unit and re-connect the DVC.  
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled  
unit.  
depending on the type of DVC.  
• If a DVC signal cannot be input, use an external input (L1/L2) for analog  
connection via audio/video cables.  
• DVC control may be disabled depending on the type of DVC, even in a  
mode other than camera mode. In this case, switch to HDD/DVD control  
and execute the normal recording procedure while operating the DVC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
114 EN  
TROUBLESHOOTING  
Symptom  
Remedy  
Certain functions of the DVC cannot  
operate.  
• Some functions may not operate depending on the type of DVC. For  
example, if the DVC does not support slow playback mode, the slow  
playback function is disabled.  
• With L3(DV-IN), the disc display menu does not appear unless disc  
playback is executed.  
DV audio signal cannot be switched.  
No image from HDMI connection.  
• For recording with the DVC, the recording audio signal can be set to 12  
bits or 16 bits. However, when 16-bit recording mode is selected, audio  
signal cannot be switched. To record an audio signal, set it to 12 bits.  
• Check the HDMI connection. (Check the status of the HDMI related  
indications.)  
• Check whether the connected monitor device or other device supports  
HDCP. (This unit will not output a video signal unless the other device  
supports HDCP.)  
• Check the setting of HDMI.  
• Check whether the output format of this unit (HDMI FORMAT) matches  
the supported input format of other connected device.  
Setup menu cannot be called up.  
TV channels cannot be changed.  
• Setup menus cannot be called up during DVD recording.  
• Check if the connections are made securely and correctly.  
• Check if the cables are damaged.  
• Try channel setting by following the steps on pages 29-31.  
Only specific channels do not appear. • The channels may be set to be skipped. (Refer to pages 30-31.)  
The external input channels (such as  
L1, L2 or L3) cannot be skipped.  
• This unit does not skip the external input channels. This is not a  
malfunction.  
The image from the external device • Try pressing [SOURCE] repeatedly.  
cannot be displayed or recorded.  
• Turn on all connected devices.  
• Check if the connections are made securely and correctly.  
Recording is impossible.  
• It is prohibited to make a recording from 2 minutes before the  
programmed start time of a timer recording.  
• This unit cannot record programs that contain copy protection signal.  
This is not a malfunction.  
• The space of the recording media may be used up. Try deleting  
unnecessary titles, or exchange it with the recordable media.  
• The maximum number of titles or chapters has exceeded. Delete the  
unnecessary titles to make enough space or insert a new recordable media.  
• Check if the connections are made securely and correctly.  
Timer recording cannot be  
performed.  
• The internal clock of the unit may have been stopped due to a power  
failure that lasted for more than 30 seconds. Reset the clock. (Refer to  
pages 32-34.)  
The picture of the autostart  
recording disappears.  
• The contents of the autostart recording will be cleared in some cases  
(Changing input channel etc.). Refer to page 46.  
When playing back the title  
recorded from the autostart  
recording, the DTV program  
information is displayed and it  
cannot be disappeared.  
• In the autostart recording, when you display the DTV program  
information, the information will be recorded as the part of the picture.  
Recording is impossible.  
• Copy-once programs cannot be recorded on DVD. This is not a  
malfunction.  
• Check if the disc is protected or finalized. Undo the protection or the  
finalization.  
• DVD-RW once formatted on other unit cannot be recorded on this unit  
unless all the contents in the disc are erased.  
• Check if the connections are made securely and correctly.  
Writing to Disc  
100%  
The indication  
• “  
” may remain on screen for the  
Writing to Disc  
100%  
“
”
maximum of 20 seconds even after it reached 100%. This is not a  
malfunction.  
does not disappear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 115  
TROUBLESHOOTING  
Symptom  
Remedy  
TV aspect ratio does not match  
your TV screen.  
• Check the TV aspect ratio. (Refer to page 111.)  
• A different aspect ratio will be used when the aspect ratio specified by  
the disc is not supported by this unit.  
Playback picture is distorted.  
Color of the picture is abnormal.  
• During fast forward or fast reverse, playback picture may be distorted.  
This is not a malfunction.  
• Connect to TV directly. When you connect this unit with the television  
via VCR or other devices, the picture may be distorted due to the copy-  
protection signal.  
• Check if the cables are damaged.  
• Keep the equipment which may cause electrical disturbances, such as a  
cellular phone, away.  
There is no sound, or no subtitle.  
• Turn on all connected devices.  
• Check if the external input channel is set correctly.  
• Check if the connections are made securely and correctly.  
• If using the HDMI connection, sound is not output when “HDMI Audio”  
is set to “OFF”.  
• Check the RCA audio cable connection. If you are using HDMI-DVI  
conversion cable, you must connect the RCA audio cable, too.  
• If using the HDMI connection, check whether the output format of this  
unit (HDMI FORMAT) matches the supported input format of other  
connected device.  
Playback does not start from the  
beginning.  
• Resume function may be activated. Refer to page 72 to cancel the  
resume point.  
HDD playback suddenly stops.  
Playback cannot be performed.  
• When DVD recording finishes during HDD playback, the unit will stop  
the HDD playback, and start writing data to the DVD. This is not a  
malfunction.  
• Check if the playable disc is inserted.  
• Check if the disc is loaded correctly with the labeled side facing up.  
• Discs made on other devices or on personal computers cannot be  
played back on this unit unless it is finalized on the device.  
Even if it is finalized, the performance of those discs are not guaranteed  
on this unit.  
• The disc may be dirty or flawed. Clean the disc.  
• Check if all the connections are made correctly.  
• Check the parental lock setting. (Refer to page 104.)  
• Playback of DVD is prohibited from 2 minutes before the programmed  
start time of a timer recording when the recording media is DVD.  
There is no sound, or no subtitle.  
• Check if “Disc Audio” is set correctly. (Refer to page 105.)  
• There is a possibility that the selected subtitle language is not  
supported by the disc.  
Digital audio setting cannot be  
changed to main audio (L), sub  
audio (R) or combination of both.  
• If the audio source is in the Dolby Digital format, set the Dolby Digital  
Setting to “PCM” in “Playback” menu. (available only for DVD) (Refer to  
page 105.)  
Audio language or the subtitle  
language of the DVD cannot be  
changed.  
• Multilingual subtitles are not supported by the disc.  
• Some audio languages or the subtitle languages can be changed only  
from the disc menu. Please refer to the disc’s manual.  
Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does  
not mean all the scenes are shot from multi-angles. Changing angles are  
available only for those scenes shot from the multi-angle.  
The disc cannot be played back on • Some DVD players do not play back the disc made on other recorder.  
other player even though it is  
finalized properly.  
Refer to the manual of the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
116 EN  
TROUBLESHOOTING  
Symptom  
Remedy  
Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by  
following the steps on page 93 for title protection and page 62 for disc  
protection.  
Dubbing cannot be executed.  
• When the number of the titles or the chapters exceeds the maximum  
recordable number, the dubbing will not be executed.  
• Dubbing of a “copy-once only” program is not possible with this unit.  
Titles cannot be edited or deleted. • The titles in the DVD+R/-R cannot be edited or deleted if they are  
finalized. If it is DVD-RW, undo the finalization by following the steps on  
page 63.  
The capacity of the disc doesn’t  
increase even if the recorded  
program is deleted.  
• With DVD+RW/-RW, the disc space will increase only when the last title  
is deleted. With DVD-R/+R, deleting a title will not increase the disc  
space.  
Dubbing cannot be executed.  
• Check if the disc is compatible for recording (refer to page 41).  
• No batteries in the remote or the batteries may be weak. Replace the  
batteries.  
The remote control does not function.  
• Make sure there is no obstacle between the remote and the unit.  
• Try getting closer to the unit. (Refer to page 12.)  
• If above solutions do not solve the problem, please call an Authorized  
Service Center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 117  
TROUBLESHOOTING  
Error message  
Cause  
Solution  
Disc Error  
• Unplayable disc is inserted in the unit.  
• The disc is upside down.  
• Insert the standardized disc which bear  
the marks on page 65.  
• Insert the disc with the labeled side  
facing up.  
— Please eject the disc. —  
Playback feature may not be available on  
this Disc.  
Region Error  
— Please eject the disc. —  
Playback is not authorized in your region.  
• Playback is not authorized in the region  
of the DVD-video which you inserted in  
the unit.  
• Insert the DVD-video with region codes  
1 or ALL.  
Parental Lock On  
The current selected parental level  
prohibits playback.  
• The current selected parental level  
prohibits playback.  
• Check “Parental Lock” setting in  
“Playback” menu (page 104).  
Recording Error  
This program is not allowed to be  
recorded.  
• The recording function encountered  
the copy prohibited program.  
• You cannot record copy prohibited  
programs.  
Recording Error  
This program is not recordable in +VR  
mode.  
• You are trying to record the copy-once  
program.  
• You cannot record the copy-once  
program.  
Recording Error  
Cannot record on this disc.  
• You are trying to record onto the disc  
which is unrecordable, or the disc status  
is unable to record.  
• Insert the recordable disc, and ensure  
the disc status satisfies the recording  
requirements (page 41).  
• Clean the disc with a cleaning cloth.  
• Replace the disc.  
• The disc is dirty.  
• The disc is damaged.  
Recording Error  
This disc is protected and not recordable.  
• You are trying to record on to the  
protected disc which is set in “Disc Edit”  
menu.  
• Release the disc protect setting in “Disc  
Edit” menu (page 62).  
Recording Error  
• You are trying to record onto the disc  
which has no space for recording.  
• Insert the recordable disc with enough  
recording space.  
Disc is full.  
(No area for new recording)  
Recording Error  
• You are trying to record onto the disc  
on which the number of recording titles  
comes up to the maximum (49).  
• Delete unnecessary titles (pages 83-84).  
You cannot record more than 49 titles on  
one disc.  
(The maximum is 49)  
Recording Error  
• You are trying to record onto the  
DVD+RW or DVD-RW on which the  
number of recording chapters comes  
up to the maximum (254).  
• Delete unnecessary chapter marks  
(pages 88-89).  
You cannot record more than 254 chapters  
on one disc.  
(The maximum is 254)  
Recording Error  
You cannot record on this disc as Power  
Calibration Area is full.  
• When recordings are performed  
repeatedly onto an unstable disc, this  
area may come up to be full.  
• Insert a new disc.  
• Every time you insert a disc for  
recording, the disc’s working area will  
be taken up. And if you repeat this  
frequently, it will be used up sooner  
and you may not be able to record full  
49 titles.  
Recording Error  
This disc is already finalized.  
• You are trying to record onto the disc  
already finalized.  
• Release the finalizing for this disc  
(page 63).  
Recording Error  
• You are trying to record onto the  
disc that had been recorded by other  
recorders.  
• Set “Make Recording Compatible” to  
“ON” to rewrite the menu, after that you  
will record to disc (page 43).  
The disc has no recording compatibility.  
Set “Make Recording Compatible” to  
“ON” to convert the disc.  
Recording Error  
You cannot record more than 600 titles  
on HDD. (The maximum is 600).  
• You are trying to record onto the HDD  
when total title number is already at its  
limit.  
• Delete unnecessary titles (pages 83-84).  
Recording Error  
Cannot record on this HDD.  
• The internal HDD is dirty or damaged.  
• There is not enough space on the  
internal HDD.  
• Contact the customer service center.  
• Delete unnecessary titles (pages 83-84).  
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the  
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
118 EN  
LANGUAGE CODE  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Code  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
Language  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Code  
5467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
Language  
Russian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Code  
6467  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean  
Kurdish  
Laothian  
Latin  
Latvian; Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto; Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance  
Romanian  
Sindhi  
Singhalese  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Frisian  
Uzbek  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Hebrew  
Hindi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 119  
GLOSSARY  
Analog Audio  
PBC (playback control) (video CD only)  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound. See also  
“Digital Audio”.  
This function enables you to play back interactive  
software using a menu screen. See also “Video CD”.  
PCM (pulse code modulation)  
The most common system of encoding digital audio,  
found on CD and DAT. Excellent quality, but requires a  
lot of data compared to formats such as Dolby Digital  
and MPEG audio. For compatibility with digital audio  
recorders (CD, MD and DAT) and AV amplifiers with  
digital inputs, this unit can convert Dolby Digital and  
MPEG audio to PCM. See also “Digital Audio”.  
Aspect Ratio  
The width of a TV screen relative to its height.  
Conventional TVs are 4:3 (in other words, the TV screen  
is almost square); widescreen models are 16:9 (the TV  
screen is almost twice as wide as it is high).  
Chapter (HDD/DVD)  
Just as a book is split up into several chapters, a title on  
HDD/DVD is usually divided into chapters. See also “Title”. A type of display that does not split each frame into  
Progressive Scan (525p/480p)  
fields, and instead scans directly through all the scanlines  
of each frame in order. Progressive scan provides less  
Component Video Output  
Each signal of luminance (Y) and component (PB/CB, PR/  
flickering and higher image resolution than traditional  
CR) is independent to output so that you can experience  
(525i/480i) TV signals. Refer to page 111 for instructions  
picture color as it is.  
on selective progressive scan mode.  
Also, due to compatibility with progressive video  
Region Code  
(525p/480p), you can experience higher-density picture  
than that in interlace (525i/480i).  
Regions associate discs and players with particular areas  
of the world. This unit will only play back discs that have  
compatible region codes. You can find the region code  
of your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
Digital Audio  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals  
(44,100 times a second for CD audio) by an analog-  
to-digital converter, generating a stream of numbers.  
On playback, a digital-to-analog converter generates  
an analog signal based on these numbers. See also  
“Sampling Frequency” and “Analog Audio”.  
Sampling Frequency  
The rate which sound is measured by a specified interval  
to turn into digital audio data. The numbers of sampling  
in one second defines as sampling frequency. The higher  
the rate, the better the sound quality.  
Dolby Digital  
The system to compress digital sound developed by  
Dolby Laboratories. It offers you sound of stereo(2ch) or  
multi channel audio.  
SAP (secondary audio program)  
Sub-audio channel which is delivered separately from  
main-audio channel. This audio channel is used as an  
alternate in bilingual broadcasting.  
Finalize  
S-Video Output  
It delivers independently each signal of color(C) and  
luminance(Y) to TV as video signals, so that higher-quality  
picture will be gained.  
To make DVD, which have been recorded on, possible to  
play back in DVD players. With this unit, it is possible to  
finalize DVD+R, DVD-RW, and DVD-R.  
HDMI (high definition multimedia interface)  
A digital interface between audio and video source. It can  
transmit component video, audio, and control signal with  
one cable connection.  
Title (HDD/DVD)  
A collection of chapters on HDD/DVD. See also “Chapter”.  
Track  
JPEG (joint photographic experts group)  
JPEG is a method of compressing still image files. You can  
copy JPEG files on CD-RW/-R from a computer and play  
back the files on this unit.  
Audio CD use tracks to divide up the content of a  
disc. The DVD equivalent is called a chapter. See also  
“Chapter”.  
Video CD  
MP3 (MPEG audio layer 3)  
MP3 is a method of compressing files. You can copy MP3  
files on CD-RW/-R from the computer and play back the  
files on this unit.  
A digital format for store video data in compact disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
120 EN  
SPECIFICATIONS  
General  
Power requirements  
Power consumption  
120V AC +/- 10%, 60Hz +/- 5%  
33W (standby: 5.7W)  
Dimensions (width x height x depth)  
Weight  
16.6 x 2.4 x 11.5 inches (420 x 59 x 290mm)  
7.5 lbs. ( 3.4kg )  
Operating temperature  
Operating humidity  
TV system  
41°F (5°C) to 104°F (40°C)  
Less than 80% (no condensation)  
ATSC/NTSC-M TV standard  
Recording  
Recording format  
+VR (video recording) format  
DVD+Rewritable, DVD+Recordable  
DVD-Rewritable, DVD-Recordable (+VR mode only)  
Recording discs  
Video recording format  
Sampling frequency  
Compression format  
13.5 MHz  
MPEG 2  
Audio recording format  
Sampling frequency  
Compression format  
48 kHz  
Dolby Digital  
Tuner  
Tuning system  
Channel frequency synthesized tuning system  
Channel coverage (ATSC / NTSC)  
Terrestrial  
CATV  
VHF 2~13, UHF 14~69  
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A  
Terminals  
Audio input  
RCA jack x 2  
2V rms (input impedance: more than 22kΩ)  
1Vp-p (75Ω)  
Video input  
RCA jack x 1  
S-video input  
Mini DIN 4-pin x 1  
DV input  
Y: 1Vp-p (75Ω)  
IEEE 1394  
C: 286mVp-p (75Ω)  
DV input jack (4 pin)  
VHF/UHF/CATV input and output  
F-type  
75Ω unbalanced  
Audio input  
RCA jack x 2  
2V rms (input impedance: more than 22kΩ)  
2V rms (output impedance: more than 1kΩ)  
1Vp-p (75Ω)  
Audio output  
RCA jack x 2  
Video input  
RCA jack x 1  
Video output  
RCA jack x 1  
1Vp-p (75Ω)  
S-video input  
Mini DIN 4-pin x 1  
S-video output  
Mini DIN 4-pin x 1  
Component video output  
RCA jack x 3  
Y: 1Vp-p (75Ω)  
Y: 1Vp-p (75Ω)  
Y: 1Vp-p (75Ω)  
500mVp-p (75Ω)  
C: 286mVp-p (75Ω)  
C: 286mVp-p (75Ω)  
PB/CB: 700mVp-p (75Ω)  
PR/CR: 700mVp-p (75Ω)  
Coaxial digital audio output  
RCA jack x 1  
HDMI output  
HDMI jack x 1  
Note  
• The specifications and design of this product are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 121  
ESPAÑOL  
Discos Reproducibles  
Disco Grabable  
Este aparato es compatible con la reproducción de los  
siguientes discos y archivos.  
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y  
DVD-R.  
Los discos DVD+R/DVD-R pueden ser grabados sólo una  
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y  
borrados muchas veces.  
En este aparato los discos DVD-RW/-R serán grabados  
automáticamente en el modo DVD+VR.  
Discos reproducibles  
DVD-video  
Logotipos  
Logotipos  
Atributos  
DVD+RW  
DVD+R  
Disco de 8 cm / 12 cm, un solo lado,  
una sola capa  
Tiempo de grabación máx. aprox.  
(modo SLP):  
DVD+RW  
DVD+R  
360 minutos (4,7 GB) (para 12 cm)  
108 minutos (1,4 GB) (para 8 cm)  
DVD-RW  
(Sólo discos en modo de video finalizados)  
DVD-RW  
DVD-R  
DVD-R  
(Sólo discos en modo de video finalizados)  
• Los siguientes discos se recomiendan para obtener una  
buena calidad de grabación y han sido comprobados  
como compatibles con este aparato. Sin embargo, según  
sea la condición del medio el equipo podría no leer el  
disco correctamente.  
CD-DA (CD de audio)  
CD de video  
Verbatim  
DVD+R 8x,  
DVD-R 8x,  
DVD-RW 4x  
DVD+RW 4x,  
DVD-RW 2x  
JVC  
Maxell  
SONY  
TDK  
DVD+R 4x/8x/16x, DVD-R 8x/16x  
DVD+R 4x/8x/16x, DVD+RW 4x  
DVD+R 4x/8x/16x  
El comportamiento de cualquier otro disco no está  
garantizado.  
CD-RW  
• Usted puede reproducir discos DVD+RW en la  
mayoría de los reproductores de DVD sin finalizarlos.  
Sin embargo, si usted ha añadido o eliminado  
capítulos, u ocultado capítulos, debe ejecutar  
“Compatibilizar edic.” antes de poder ver dichos  
efectos en otros equipos. (Consulte la página 98.)  
Para reproducir discos que no sean DVD+RW en  
otros reproductores de DVD, usted necesitará  
finalizarlos.  
CD-R  
Kodak Picture CD  
Disco no Grabable  
• Un DVD-RW grabado en un modo distinto de +VR no  
será grabable en este aparato a menos que usted borre  
todo el contenido del disco. (Consulte la página 97.)  
• Un DVD-R grabado en un modo distinto de +VR no será  
grabable en este aparato.  
Archivos reproducibles  
Soportes  
MP3  
CD-RW/-R  
JPEG  
es una marca registrada de  
DVD Format/Logo Licensing Corporation.  
Códigos de Región  
El número presente en el interior  
el globo se refiere a una región  
del mundo.Este aparato puede  
reproducir discos DVD que estén  
rotulados para ALL las regiones o  
para la región 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
122 ES  
ESPAÑOL  
Conexión Básica  
cable RCA de vídeo  
cable RCA de audio  
VIDEO IN  
VIDEO  
OUT  
AUDIO IN  
L
L
R
R
AUDIO OUT  
parte trasera de la unidad  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
ANT. IN  
Esta conexión es sólo para  
el procesamiento de cada  
elemento de la señal de TV  
antena de  
VHF / UHF  
cable  
IN  
coaxial de RF  
OUT  
o
cable  
coaxial  
de RF  
ANTENNA  
empresa de  
TV por cable  
Cables suministrados:  
• cable coaxial de RF x 1  
• cable RCA de audio (L/R) x 1  
• cable RCA de vídeo x 1  
Por favor, compre el resto de los cables necesarios en su tienda local.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES 123  
ESPAÑOL  
Conexión a un Televisor con un Puerto Compatible con HDMI  
• HDMI emite las señales de video/audio sin convertirlas en señales analógicas.  
• No es necesaria una conexión de audio.  
HDMI IN  
cable HDMI  
HDMI OUT  
parte trasera de la unidad  
VIDEO VIDEO  
Y
IN  
OUT  
IN  
L
L
OUT  
R
R
IN  
OUT  
COAXIAL  
AUDIO IN  
ANTENNA  
S-VIDEO AUDIO OUT  
S-VIDEO  
(
)
L1  
ANT. IN  
Esta conexión es sólo  
para el procesamiento  
de cada elemento de  
la señal de TV  
antena de  
VHF / UHF  
IN  
cable  
coaxial  
de RF  
No incline el conector para introducirlo en la toma HDMI y compruebe que el tipo  
de toma corresponde con el tipo de conector.  
OUT  
o
cable coaxial  
de RF  
empresa de  
TV por cable  
ANTENNA  
Cables suministrados:  
• cable coaxial de RF x 1  
Por favor, compre el resto de los cables necesarios en su tienda local.  
Modo HDMI y señales efectivas de salida  
Presione [HDMI] para seleccionar el modo de salida HDMI. Cada vez que se presiona [HDMI] el modo de salida varía  
como sigue.  
Pantalla del  
panel frontal  
Señal de salida  
de video  
Progresivo de 480  
Progresivo de 720  
1080 entrelazado  
Progresivo de 1080  
Presione [HDMI]  
Presione [HDMI]  
Presione [HDMI]  
Presione [HDMI]  
• El modo HDMI que no esté admitido por el  
dispositivo de exhibición será pasado por alto.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
124 ES  
ESPAÑOL  
Configuración Inicial  
Cuando usted encienda este aparato por primera vez  
necesita seguir estos pasos.  
Utilice [K /L] para seleccionar el tipo de  
señal de emisión, y luego presione [OK].  
3
4
Ajuste inicial  
Presione [STANDBY-ON y].  
Ajuste de Canal  
Encienda el televisor. Seleccione la entrada a  
1
Verificar que la antena esté  
conectada a la toma "ANTENNA IN".  
la cual está conectado el aparato.  
Antena  
Cable (Analógico)  
Cable (Analógico/Digital)  
Utilice [K / L] para seleccionar su  
idioma deseado, y luego presione  
Ajuste Auto escaneará los canales terrrestres.  
Esto tarda unos momentos en finalizar.  
2
[OK] para establecerlo.  
El equipo comenzará a obtener los canales  
disponibles en su región.  
Initial Setup  
OSD Language  
Utilice [{ /B] para seleccionar un  
English  
Français  
Español  
elemento a configurar, y utilice [K / L  
para seleccionar el contenido de su  
preferencia, y luego presione [OK].  
]
Ajuste inicial  
Ajste Manual de Reloj  
ENE / 01 / 2010 ( VIE )  
12 : 00 AM  
Grabación Básica  
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.  
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD].  
Presione [OPEN/CLOSE A]  
para abrir la bandeja de  
discos e insertar su disco  
con el rótulo aupntando  
hacia arriba. Presione de  
nuevo [OPEN/CLOSE A] para cerrar la  
bandeja de discos.  
Presione [REC] para iniciar la  
grabación.  
1
2
3
4
Para configurar la grabación a un toque  
con temporizador (OTR)...  
Esta es una manera sencilla de configurar el tiempo de  
grabación en bloques de 30 minutos.  
Presione [REC] repetidamente hasta que aparezca en la  
pantalla del televisor la longitud deseada de grabación  
(30 minutos a 6 horas).  
* Asegúrese de que el disco sea compatible con  
este aparato. (Para obtener la lista de discos  
compatibles consulte la página 122.)  
Para seleccionar un modo de grabación  
presione repetidamente [REC MODE].  
Comenzará la grabación a un toque con temporizador.  
I
0h30m  
Calidad del video  
y el sonido  
Modo de  
grabación  
Tiempo de grabación  
0h30m  
1h00m  
Disco de 8 cm Disco de 12 cm HDD (interno)  
(grabación normal)  
6h00m  
18 min  
36 min  
45 min  
54 min  
72 min  
108 min  
60 min  
120 min  
150 min  
180 min  
240 min  
360 min  
64 hrs  
129 hrs  
161 hrs  
193 hrs  
258 hrs  
387 hrs  
HQ  
SP  
SPP  
LP  
EP  
SLP  
Buena  
5h30m  
Para cambiar la duración de la grabación durante la  
grabación a un toque con temporizador:  
Presione [REC] repetidamente hasta que aparezca la  
duración deseada.  
Para cancelar la grabación a un toque con  
temporizador dentro del tiempo especificado:  
Presione [STOP C].  
Deficiente  
Seleccione un canal externo de  
entrada adecuado presionando  
[SOURCE] o [CHANNEL  
/
].  
Presione [DTV/TV] para seleccionar TV  
analógica o TV digital, luego y utilice  
[CHANNEL  
/
] o [los botones  
Para de tener la grabación presione  
[STOP C].  
numéricos] y [ • ] (para canales de TV  
digital) para seleccionar un canal que  
se desee grabar.  
5
Consulte “Switching Analog Mode/Digital Mode”  
y “Channel Selection” en la página 35.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES 125  
ESPAÑOL  
Copiado Básica  
Preparación para el copiado (unidad de disco rígido a DVD):  
• Inserte un DVD grabable.  
Preparación para el copiado (DVD a unidad de disco rígido):  
• Inserte un disco a ser copiado.  
Utilice [s / B] para seleccionar un  
modo de grabación deseado, y luego  
presione [OK].  
8
9
Presione [SETUP] en el modo de  
Utilice [K / L] para seleccionar “Sí”, y  
luego presione [OK].  
El copiado comenzará.  
Para detener el copiado en curso:  
Presione [C STOP] en el panel frontal.  
Presione [STOP C] en el control remoto durant 2  
segundos.  
detención.  
1
Utilice [K / L] para seleccionar  
“Doblaje”, y luego presione [OK].  
2
A la hora de realizar una copia del HDD al DVD  
aparecerá un mensaje de confirmación;  
seleccione “Sí”.  
Unidad de disco rígido a DVD  
Utilice [K / L] para seleccionar  
3
“HDD DVD”, y luego presione [OK].  
Copiado a un toque......  
Con el copiado a un toque, usted puede comenzar a  
copiar de inmediato con sólo un toque.  
Para copiar el contenido de un DVD que está finalizado  
en otro equipo, utilice esta función.  
Durante la reproducción del título que desea  
copiar, presione [D.DUBBING].  
Si usted está reproduciendo un DVD, el copiado del DVD  
a la unidad de disco rígido comenzará de inmediato.  
Si usted está reproduciendo una unidad de disco rígido,  
el copiado de la unidad de disco rígido al DVD  
comenzará de inmediato.  
DVD a Unidad de disco rígido  
Utilice [K / L] para seleccionar  
“DVD HDD”, y luego presione [OK].  
Utilice [K / L] para seleccionar  
“Añadir”, y luego presione [OK].  
4
HDD  
DVD  
3000 MB  
Lista doblaje  
Añadir  
Borrar todo  
Inic de doblaje  
• El copiado comenzará desde el comienzo del título que  
está siendo reproducido.  
• El aparato sólo copiará el título que está siendo  
reproducido.  
Utilice [K / L / s / B] para seleccionar  
• Cuando se copia de una unidad de disco rígido a un  
DVD, el modo de grabación será configurado  
automáticamente a “Alto” cada vez que se satisfagan las  
condiciones (consulte la página 53). De lo contrario,  
será aplicado automáticamente el último modo de  
grabación seleccionado.  
Para detener el copiado en curso:  
Presione [C STOP] en el panel frontal.  
Presione [STOP C] en el control remoto durant 2 segundos.  
un título deseado, y luego presione  
5
6
[OK].  
En la esquina superior de cada título aparece el  
número en el orden de selección.  
Repita el paso 5 hasta que haya  
registrado todos los títulos que  
desea copiar; a continuación, pulse  
[D. DUBBING].  
A la hora de realizar una copia del HDD al DVD aparecerá un  
mensaje de confirmación; seleccione “Sí”.  
Lista de Títulos  
ABCDE  
12:00AM (10:00:00) JAN/ 1/10  
CH10 SP  
3
1
4
1
5
2
5
3
6
2
4
Puls. ‘D. DUBBING’ y confirme.  
1 / 6  
Luego de añadir todos los títulos que  
desea, utilice [K / L] para seleccionar  
“Inic de doblaje” en el menú de  
copiado, y luego presione [OK].  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
126 ES  
ESPAÑOL  
Reproducción Directa  
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.  
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD].  
Presione [OPEN/CLOSE A]  
para abrir la bandeja de  
discos e insertar su disco  
con el rótulo aupntando  
hacia arriba. Presione de nuevo  
[OPEN/CLOSE A] para cerrar la  
bandeja de discos.  
Para iniciar una reproducción  
presione [PLAY B].  
1
2
3
Para detener momentáneamente la  
reproducción presione [STOP C]  
una vez.  
• Consulte “Resume Playback” en la página 72.  
* Asegúrese de que el disco sea compatible con  
este aparato. (Para obtener la lista de discos  
compatibles consulte la página 122.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES 127  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship  
as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date  
of original retail purchase. Certain parts are excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of  
original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER  
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE  
UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing  
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any  
product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products  
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,  
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or  
office use of this product, or damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY  
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT  
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS  
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL  
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.  
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF  
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM  
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION  
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT  
PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original  
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI  
CORP. will not reimburse you for any service done by unauthorized service providers without prior written  
approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please  
contact us at:  
FUNAI SERVICE CORPORATION  
Tel: 1-800-605-8610  
www.magnavox.com/support  
2200 Spiegel Drive Groveport, OH 43125  
E2S01UD  
1VMN29193 ★★★★★  
Printed in China  
*
1
V
M
N
2
9
1
9
3
*
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kuppersbusch USA Dishwasher IGVS6607 UL User Manual
KWC Outdoor Shower Z506072000 User Manual
Life Fitness Home Gym Ab Back Machine User Manual
Life Fitness Treadmill 95T User Manual
Magic Chef Juicer MCJ1W User Manual
Makita Chainsaw UC3530A User Manual
Makita Cordless Drill HR160D User Manual
Martin Audio Portable Speaker WW33 User Manual
Melissa Toaster 243 046 User Manual
Memorex CD Player MPD8853 User Manual