Link electronic Network Card DigiFlex 1190 User Manual

1000 SERIES DIGIFLEX  
LINK ELECTRONICS, INC.  
SDI FRAME SYNCHRONIZER MODULE  
DigiFlex 1190  
MADE IN THE USA  
FEATURES  
10 Bit Processing  
Digital Component Input  
Digital Component Output  
Analog Blackburst Reference  
Infinite Window H & V Phasing  
Freeze Last Good Frame/Field On Signal Loss  
Mounting Frame Options  
1000 - Single Power Supply, Holds 11 Modules  
1000/2 - Dual Power Supply, Holds 10 Modules  
7200 - Mounting Frame, Holds 1 Module  
The LINK 1190 Frame Synchronizer represents  
the state of the art in digital signal synchronization.  
It’s input is asynchronous component serial digital  
video, which is de-serialized and written into the  
on-board frame buffer.  
The Link 1190 is used either ahead of the  
conversion device or behind the conversion  
device. This provides the user with a great deal of  
system flexibility. There are over 24 system  
configurations.  
The output is read from memory according to the  
timebase of the analog blackburst reference  
signal. Front panel horizontal and vertical phase  
adjustments control the output timing relative to  
the reference. When used in conjunction with our  
A-to-D and D-to-A products, analog signals may  
be synchronized to a house reference as well.  
The 1190 provides for both PAL and NTSC  
reference inputs. Timing for both Horizontal and  
Vertical are controlled from the front panel. The  
1190 operates in the 1000 series frame in any  
module configuration. This is not a sub-module, it  
is a full featured product.  
When the input video is lost the output will either  
be black or the last good frame of video, jumper  
selectable. If the reference video is lost, the 1190  
will use it’s own internal timebase with 2.5ppm  
stability standard.  
LED’s on the card edge provide monitoring of  
Power, Video Presence Analog, Video Presence  
Digital, NTSC/PAL, and H Lock Analog.  
The 1190 can be used with the DigiFlex 1159,  
1160, 1162, 1165, 1166, or 1167 to synchronize  
composite or component analog signals to the  
system.  
The 1190 has automatic NTSC/PAL digital  
detection on the input signal. Theanalog reference  
input must match the input signal.  
LINK  
ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668  
Phone 573 334 4433 FAX 573 334 9255  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LaCie Home Theater System LaCinema Rugged User Manual
Lenovo Tablet T420 User Manual
Lenoxx Electronics Electric Heater LF24 User Manual
Lexmark Air Conditioner 12EZ User Manual
LG Electronics Home Theater System HX995TZW User Manual
LG Electronics Microwave Oven LMV1680DB User Manual
LG Electronics Refrigerator LFX21980 User Manual
Makita Impact Driver BTP140Z User Manual
Marshall electronic Microcassette Recorder R144 User Manual
Mellerware Coffeemaker 29002 User Manual