Lexicon Car Satellite TV System RV Receiver User Manual

RV-5 Receiver  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lexicon, “Logic 7”, and the L7 logo are registered trademarks of Harman International Industries, Inc.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby  
Laboratories.  
“DTS” and “DTS-ES | Neo:6” are registered trademarks of DTS, Inc. and “96/24” is a trademark of DTS, Inc.  
“Faroudja” and “DCDi by Faroudja” are trademarks of Genesis Microchip, Inc.  
“HD-DVD” is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).  
“HDMI”, the HDMI logo, and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing  
LLC.  
Lexicon Inc.  
3 Oak Park Drive  
Bedford, MA 01730-1413 USA  
“iPod” and “iTunes” are trademarks of Apple Computer, Inc.  
“SACD” is a trademark of Sony Electronics, Inc.  
Tel  
Fax  
781-280-0300  
781-280-0490  
“Windows” is a trademark of Microsoft, Inc.  
“DLP” and “Digital Light Processing” are trademarks of Texas Instruments, Inc.  
www.lexicon.com  
Customer Service  
Other company and product names may be trademarks of the respective companies with which they are associated.  
Telephone:  
Sales Fax:  
781-280-0300  
781-280-0495  
781-280-0499  
Service Fax:  
© 2007 Harman Specialty Group and Harman International Industries, Incorporated. All rights reserved.  
Harman Specialty Group is a wholly-owned company of Harman International, Inc.  
This document should not be construed as a commitment on the part of Harman Specialty Group. The information it contains is  
subject to change without notice. Harman Specialty Group assumes no responsibility for errors that may appear within this  
document.  
Part No. 070-18144 | Rev 0 | 06/07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Lexicon  
DOCUMENTATION CONVENTIONS  
This document contains general safety, installation and operation instructions for the RV-5 Receiver. It is important to read this user guide before  
attempting to use the product. Pay particular attention to safety instructions.  
Note: This manual is not intended as a general reference guide for home theater systems. If you’re uncertain how to proceed in setting up or maintaining  
your system, seek the advice of a professional installer or ask your dealer for their recommendations.  
All graphics of the product are included for reference only and may not completely reflect the physical product that is shipped.  
The following symbols are used in the document:  
Appears on the component to indicate the  
presence of uninsulated, dangerous voltage  
inside the enclosure voltage that may be  
sufficient to constitute a risk of shock.  
Appears on the component to indicate important  
operating and maintenance instructions in the  
accompanying literature.  
Calls attention to  
a
procedure, practice,  
WARNING  
condition or the like that, if not correctly  
performed or adhered to, could result in injury or  
death.  
Calls attention to  
a
procedure, practice,  
CAUTION!  
condition or the like that, if not correctly  
performed or adhered to, could result in damage  
or destruction to part or all of the product.  
Calls attention to information that is essential to  
highlight.  
Note:  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
RV-5  
Introduction  
Manual ................................................................................. 3-6  
Speakers Menu ................................................................... 3-10  
Speaker Distances Menu ..................................................... 3-11  
Output Levels Menu ............................................................ 3-12  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Lexicon  
Setup Menu: Speaker/EQ Setup ............................................. B-5  
Index  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Getting Started  
About the RV-5........................................................................... 1-2  
Product Registration................................................................... 1-2  
Highlights .................................................................................. 1-2  
What’s in the Box....................................................................... 1-3  
Available Options ....................................................................... 1-3  
D-1 iPod Docking Station.......................................................................... 1-3  
RF-1 Receiver............................................................................................. 1-3  
Installation Considerations.......................................................... 1-4  
Remote Control Battery Installation ............................................ 1-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Lexicon  
ABOUT THE RV-5  
HIGHLIGHTS  
Thank you for purchasing the RV-5 Receiver, a multi-faceted audio  
and video preamplifier with built-in processing. Married to that is a  
high-current, 7-channel power amplifier capable of driving a wide  
array of loudspeakers and a built-in FM/AM tuner. In addition, the  
RV-5 can accommodate a pair of HDMI source devices and can  
connect directly to a PC via USB, enabling the control and playback  
of streaming audio files. With the optional dock accessory, iPod  
owners can even connect and play their iPod through the RV-5.  
12 configurable inputs, 8 channels, 2 audio zones  
Logic 7 audio processing  
Automatic EQ and speaker calibration (microphone included)  
HDMI inputs and output  
®
Faroudja video processing  
RS-232 control, rear panel IR input, 2 trigger outputs  
Assignable power amplifier (Rear channels or Zone 2 in  
5.1-channel systems)  
The RV-5 is designed to serve as the control center for your home  
theater system. A landmark product for Lexicon, the RV-5 offers  
capabilities never before offered as well as breaking ground with  
several brand new features. The RV-5 represents a new age in audio  
and video processing equipment from Lexicon.  
7.1-channel analog input array  
Universal pre-programmed and learning remote control  
PC-compatible media player support via USB connector  
iPod support (with optional accessory  
We hope you enjoy your Lexicon experience!  
RF remote control (with optional accessory)  
PRODUCT REGISTRATION  
Please register your RV-5 Receiver online at  
www.harmanspeciatlygroup.com/registration/ within 15 days of  
purchase. Retain the sales receipt as proof of warranty coverage.  
1-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
RV-5  
Getting Started  
of the RV-5 to access and control your iPod. Just one simple  
connection and you’re ready to go!  
WHAT’S IN THE BOX  
The following items are included with the RV-5 Receiver:  
Single connection to your Lexicon receiver  
Plays audio from an iPod through your Lexicon receiver  
Controls your iPod through your Lexicon receiver  
Simple track selection with on-screen navigation  
Charges the iPod  
One AM Radio Antenna  
One FM Radio Antenna  
One User Guide (this document)  
One Remote Control  
Four AAA Batteries (for use with Remote Control)  
One Microphone  
RF-1 RECEIVER  
One Microphone Rod  
The optional RF-1 Receiver utilizes the RF feature of the Lexicon remote  
control, allowing you to control components that are completely  
out-of-sight, up to 100-feet away. Since the RF-1 Receiver picks up the  
RV-5’s remote control radio frequency signal, the remote control no  
longer needs to be pointed directly at the components to control  
them. Now you can close your entertainment center doors, hide your  
components, and still control them with ease.  
One 115V Power Cord (US Version Only)  
Two 230V Power Cords (International Version Only)  
AVAILABLE OPTIONS  
The following accessories are available for purchase as options to  
the RV-5 Receiver:  
The RF-1 Receiver accessory requires no setup to the Lexicon remote  
control in order for the feature to work - you need only place the RF-1  
Receiver in the rack or cabinet, or attach an emitter to the RV-5 front  
panel over the IR receiver. Every time a command is sent from the  
remote control, it sends both a standard IR and an RF signal. The RF-1  
Receiver automatically receives the remote’s radio signals and  
translates them into the infrared commands that control the  
components.  
D-1 iPod Docking Station, Part No. 021-18138, allows an iPod  
to be connected and controlled by the RV-5 Receiver.  
RF-1 Receiver, Part No. 021-18005, allows the remote control  
to operate via RF (Radio Frequency), giving the remote a  
broader operating range.  
D-1 iPOD DOCKING STATION  
The optional D-1 iPod Docking Station allows you to enter a new  
world of listening enjoyment made possible by combining the  
increased storage capacity and playback flexibility of an iPod® (not  
included) with the sonic power of your Lexicon receiver. Operation  
is easy, you can use your Lexicon remote control or the front panel  
1-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Getting Started  
Lexicon  
INSTALLATION CONSIDERATIONS  
REMOTE CONTROL BATTERY  
INSTALLATION  
The RV-5 requires special care during installation to ensure optimal  
performance. Pay particular attention to the instructions below and  
to other precautions that appear throughout this user guide.  
The remote control requires four AAA batteries. The batteries  
should be replaced as needed. Alkaline batteries, which last longer  
without leaking, are recommended. When battery power is low, the  
remote control enters a low-voltage condition, preventing it from  
operating the RV-5. When this occurs, replace the batteries. Normal  
operation will resume when new batteries are installed.  
DO install the RV-5 on a solid, flat, level surface such as a table or  
shelf.  
DO select a dry, well-ventilated location out of direct sunlight.  
Note: The Remote Control will not lose any custom settings if the batteries  
run out. All custom settings are stored in non-volatile FLASH memory.  
DO NOT expose the RV-5 to high temperatures, humidity, steam,  
smoke, dampness or excessive dust. Avoid installing the RV-5 near  
radiators or stacking the RV-5 over other heat-producing  
equipment such as a power amplifier.  
To replace the remote control batteries:  
1. Locate the battery compartment on the back of the remote  
control. Press the tab and lift the cover away from the remote  
control.  
DO NOT place the RV-5 on a thick rug or carpet, or cover the RV-5  
with a cloth, as this might prevent proper cooling.  
2. Remove old batteries, if applicable.  
DO NOT place the RV-5 on a windowsill or any location exposed to  
direct sunlight.  
3. Observing the proper polarity, insert four AAA batteries.  
4. Align the cover over the battery compartment and gently press  
down until it snaps back into place.  
DO NOT obstruct the front panel IR receiver window. The remote  
control must be in line of sight with the IR receiver for proper  
operation (unless using the optional RF-1 Receiver).  
5. Properly dispose of the old batteries.  
DO NOT install the RV-5 on a surface that is unstable or unable to  
support all four feet.  
CAUTION!  
Before moving the RV-5, power the unit off using the rear  
panel power switch and unplug the power cord from the  
wall outlet.  
1-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
2
Basic Operation  
Front Panel Overview ................................................................. 2-2  
Rear Panel Overview................................................................... 2-5  
Amplifier Overview..................................................................... 2-8  
Making Connections With the Amplifier Output........................................ 2-8  
Utilizing Spare Channels............................................................................ 2-8  
Tuner, PC, & Dock Overview...................................................... 2-9  
Remote Control Overview .......................................................... 2-9  
Operation Considerations.......................................................................... 2-9  
RV-5 Menu Overview .............................................................................. 2-10  
Menu Navigation.................................................................................... 2-10  
Remote Control Buttons.......................................................................... 2-11  
Menu Options......................................................................................... 2-12  
Menu Item Selection............................................................................... 2-12  
Remote Control Light Button .................................................................. 2-12  
Command Matrix ................................................................................... 2-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Lexicon  
FRONT PANEL OVERVIEW  
The RV-5 is shown below. The numbers in the front panel illustration correspond with the numbered items in the text.  
2
3
6
1
5
4
10  
9
7
11  
8
1. Front Panel Display  
2. IR Receiver  
7. Zone 2 Off Button  
8. Main Zone Off Button  
9. Mute Button  
3. Volume Knob  
4. Tuner/iPod Control Buttons  
10. Mode Buttons  
5. Main Zone Input Selection Buttons  
6. Zone 2 Input Selection Buttons  
11. On/Standby Button  
2-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RV-5  
Basic Operation  
2. While holding down the Zone 2 input button, rotate the volume  
knob clockwise to increase the volume or counter-clockwise to  
decrease the volume. On the front panel 2-line display, the  
bottom left side displays that Zone 2 is selected and the bottom  
right side indicates the current volume level.  
1 FRONT PANEL DISPLAY  
Use the front panel 2-line display to view the current input source,  
input type, listening mode, and volume level. The 2 x 20 character  
display also functions as a display for messages and menus, one line  
at a time.  
Note: If you attempt to set the volume higher than the maximum or lower  
than the minimum volume levels, the displayed volume level flashes.  
2 IR RECEIVER  
The IR receiver receives infrared commands from the RV-5 remote  
control. Blocking the IR receiver will prevent the remote control  
from functioning properly (unless using the optional RF-1  
Receiver).  
4 TUNER/iPOD CONTROL BUTTONS  
The Tuner Controls section of the front panel selects the station  
frequencies, AM or FM broadcast bands, Stereo or Monoaural  
playback, and the saving or recalling of preset stations. The Tuner  
controls also function as controls for the iPod, when using the  
optional D-1 iPod Docking Station. See Section 5: Tuner, PC, and  
Dock Controls for more information.  
3 VOLUME KNOB  
Use the volume knob to adjust the volume level. The adjustable volume  
range is -80 dB to +10 dB in 1 dB increments.  
5 MAIN ZONE INPUT SELECTION BUTTONS  
Note: The maximum volume level may be lower than +10 dB due to the  
output level settings of the speakers. Refer to Section 3: Setup for more  
information on setting the speaker output levels.  
Individually select each of the twelve inputs available in the Main  
Zone. When an input is selected, a blue LED lights in the  
corresponding input selection button. When the Main Zone is  
deactivated, pressing a Main Zone input selection button activates  
the corresponding input in the Main Zone.  
To adjust the Main Zone volume level:  
Rotate the volume knob clockwise to increase or counter-clockwise  
to decrease the volume level in 1dB increments. The current  
volume level is indicated on the bottom right side of the 2-line front  
panel display.  
When the RV-5 is in Standby, pressing a Main Zone input selection  
button powers on the RV-5, selects the input in the Main Zone, and  
turns off Zone 2.  
To adjust the Zone 2 volume level:  
6 ZONE 2 INPUT SELECTION BUTTONS  
1. Press and hold the front panel Zone 2 input selection button that  
corresponds with the current input source. For instance, if DVD is  
the current Zone 2 input source, press and hold the DVD input  
selection button in the Zone 2 area of the front panel.  
Individually select each of the twelve inputs available in Zone 2.  
When an input is selected, an amber LED lights on the  
corresponding input selection button. When Zone 2 is deactivated,  
2-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Basic Operation  
Lexicon  
pressing a Zone 2 input selection button activates the  
corresponding input in Zone 2.  
holding the Volume button, while the sound is muted, resets to the  
original pre-mute volume level, as displayed on the 2-line display,  
and then increases or decreases the volume from that point, turning  
off mute.  
When the RV-5 is in Standby, pressing a Zone 2 input selection  
button powers on the RV-5, selects the input in Zone 2, and turns  
off the Main Zone.  
The LED in the MUTE button lights red when the Main Zone mute is  
active, green when the Zone 2 mute is active, and amber when  
both Zones are muted. The volume can also be muted by using the  
MUTE button on the remote control, which functions in the same  
manner. However, the remote only mutes Zone 2 if the touch  
screen is in the “Zone 2” menu layer.  
7 ZONE 2 OFF BUTTON  
Deactivates Zone 2. When Zone 2 is off, the Zone 2 OFF button on  
the front panel lights red.  
10 MODE BUTTONS  
8 MAIN ZONE OFF BUTTON  
Use the Mode buttons to scroll to the previous () or next ()  
available listening mode. Scrolling the Mode button reveals the  
entire list of listening modes available for the currently selected  
input and mode family. For more information on selecting listening  
modes, refer to Section 3: Setup.  
Deactivates the Main Zone. When the Main Zone is off, the Main  
Zone OFF button on the front panel lights red.  
Note: Activating the Main Zone OFF button on the front panel turns off  
the audio, however the video continues to be output through both the  
analog and HDMI video outs. If using the HDMI Video In connection, only  
the HDMI video is output. If the analog Video In is used, then both analog  
and HDMI video is output. Main Zone OSD (On-Screen Display) menus  
are also still available.  
11 ON/STANDBY BUTTON  
Toggles the RV-5 between On and Standby. The rear panel Power  
Switch must be set to the ON position for the Standby button to be  
active. When the RV-5 is in the standby mode, pressing the  
Standby button turns the unit on and changes the light in the  
Standby button from red to blue. Power is still supplied to the RV-5  
when standby mode is activated.  
9 MUTE BUTTON  
Mutes the Main Zone and Zone 2 volumes. Press the MUTE button to  
mute the Main Zone volume level; “MUTE ON” appears in the 2-line  
front panel and OSD displays. Press the MUTE button again to restore  
the volume to its original level. If a front panel Zone 2 input button is  
held down, then pressing the MUTE button on the front panel will  
mute the Zone 2 output.  
When the rear panel Power Switch is set to the ON position or AC  
power is applied or restored, the RV-5 automatically enters the  
standby mode.  
Note: When taken out of standby, the RV-5 activates the Zone inputs that  
were active in the previous operating session.  
On the remote control, pressing the volume button once on the  
remote while the volume is muted, turns off mute. Pressing and  
2-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Basic Operation  
Lexicon  
REAR PANEL OVERVIEW  
The RV-5 rear panel is shown below. The numbers in the rear panel illustrations correspond with the numbered items in the text.  
4
8
11  
2
3
5
7
10  
13  
14  
6
9
12  
1
21  
17  
19  
15  
20  
17  
18  
16  
1. Microphone Input Connector  
8. RS-232 Connector  
9. S-Video/Composite Input Connectors  
15. Power Switch  
2. 8-CH Analog Audio Input Connector  
Array  
16. AC Input Connector  
17. Amplifier Outputs  
18. IR Input Connector  
19. Dock Connector  
10. S-Video/Composite Ouput Connectors  
11. Component Video Input Connectors  
12. Component Video Output Connector  
13. HDMI Input Connectors  
3. Stereo Analog Audio Input Connectors  
4. Digital Audio Input Connectors  
5. Zone 2 Audio Output Connectors  
6. USB Connector  
20. Preamplifier Outputs  
14. HDMI Output Connector  
21. Tuner Antenna Connectors  
7. Trigger Output Connectors  
2-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Operation  
Lexicon  
CAUTION!  
5 ZONE 2 AUDIO OUTPUT CONNECTORS  
Provide preamplifier audio outputs for Zone 2.  
Never make or break connections to the RV-5 unless the  
RV-5 and all associated components are powered off.  
6 USB CONNECTOR  
Provides a USB port to connect to a PC computer, enabling the user  
to listen to audio from the computer through the RV-5 Receiver.  
The USB connector port is a “mini B” connector and requires a USB  
cable (not included). See Section 5: Tuner, PC, & Dock Controls for  
more information on the playback of computer audio.  
1 MICROPHONE INPUT CONNECTOR  
Provides a microphone input for system calibration. The  
microphone input is only for use with the supplied microphone  
during the systemcalibration process. See Section 3: Setup for more  
information on system setup and calibration.  
7 TRIGGER OUTPUT CONNECTORS  
2 8-CH ANALOG AUDIO INPUT CONNECTORS  
Provide a 12V DC output to control connected components. Two  
trigger output connectors are available as 3.5 mm mono mini  
phone jacks. The OUT 1 connector is the power trigger and is not  
configurable; it is activated when the RV-5 is powered on or taken  
out of Standby, and deactivated when the RV-5 is powered off,  
either from the rear panel or by putting the RV-5 into Standby  
mode. The OUT 2 connector can be configured independently for  
each input, refer to Section 3: Setup for more information on how to  
configure the OUT 2 trigger.  
Provides 8-channel analog audio input via eight RCA connectors  
labeled Front L/R, Center, LFE, Side L/R and Rear L/R. These inputs  
are used to connect source devices such as high-resolution DVD  
players, DVD-Audio, or SACD players with discrete analog audio  
outputs. Depending on the source device in use, all eight  
connectors may be used, although only the Front L/R, Center, Side  
L/R, and LFE are required for 5.1 analog audio signals.  
3 STEREO ANALOG AUDIO INPUT CONNECTORS  
Note: The OUT 2 trigger is referred to as “TRIGGER 2” in the Input Setup  
menu.  
Provide stereo analog audio input. Six stereo analog audio input  
RCA connectors labeled 1 to 6 are available.  
8 RS-232 CONNECTOR  
4 DIGITAL AUDIO INPUT CONNECTORS  
The RS-232 serial connector provides serial remote control through a  
standard RS-232 connection. Refer to the Lexicon website  
(www.lexicon.com) for more details on controlling the RV-5 Receiver  
via the RS-232 connection.  
Provide digital audio input via four S/PDIF optical (TOSLINK) and four  
S/PDIF coaxial (RCA) input connectors. Connectors are compatible  
with most PCM, Dolby Digital, and DTS(-ES) sources.  
2-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
RV-5  
Basic Operation  
9 S-VIDEO/COMPOSITE INPUT CONNECTORS  
15 POWER SWITCH  
Provide the S-Video & Composite analog video inputs. Four  
composite video connectors labeled 1 to 4 and four S-Video  
connectors labeled 1 to 4 are available.  
Use the Power Switch to connect or disconnect power from the AC  
Input connector to the RV-5 Receiver. When the RV-5 is powered on,  
the front panel Standby button or remote control ON & OFF buttons  
can be used to activate and deactivate standby mode. When the  
RV-5 is powered off via the rear panel switch, the Standby and ON  
modes are not available.  
10 S-VIDEO/COMPOSITE OUTPUT CONNECTORS  
Provide the S-Video & Composite video outputs. One composite  
video connector and one S-Video connector are available.  
16 AC INPUT CONNECTOR  
Provides power to the RV-5 through the supplied power cord.  
11 COMPONENT VIDEO INPUT CONNECTORS  
Provide inputs that can be used with any source device that is  
equipped with analog Y/Pr/Pb or RGB component video outputs.  
Three inputs, labeled Component Video 1 to 3, are supplied.  
17 AMPLIFIER OUTPUTS  
Provide audio outputs to the speakers. Channels are labeled for  
Front L/R, Center, Side L/R, and Rear L/R speakers to facilitate  
surround system setup. Normally, the REAR LEFT & REAR RIGHT  
speakers are used in the Main Zone for 7.1 surround sound systems,  
but they can also be used as the left and right outputs for Zone 2.  
12 COMPONENT VIDEO OUTPUT CONNECTOR  
Provides one component output that can be used with any device that  
is equipped with analog Y/Pr/Pb or RGB component video intputs.  
The amplifier binding posts can accommodate up to 10-gauge bare  
wire. See the next page for additional amplifier information.  
13 HDMI INPUT CONNECTORS  
18 IR INPUT CONNECTOR  
Provide two HDMI inputs for devices such as a DVD player or HDTV  
tuner.  
Accepts input of IR signals from infrared distribution equipment via  
one 3.5mm jack that accepts a stereo plug (Tip/Ring/Sleeve  
connection) or mono plug (Tip/Sleeve connection).  
14 HDMI OUTPUT CONNECTOR  
Provides one HDMI output for HDMI-equipped video monitors.  
2-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Basic Operation  
Lexicon  
19 DOCK CONNECTOR  
AMPLIFIER OVERVIEW  
Provides an interface for an iPod, which can then be accessed  
through the RV-5. To use this feature, the D-1 Dock option must be  
installed to the rear panel DOCK connector. With a compatible  
iPod connected to the RV-5, selecting the DOCK input allows you to  
play audio files from the iPod. You can view and navigate through  
the iPod menus using the RV-5 remote control or front panel  
controls.  
The RV-5 features a high-current 7-channel power amplifier with  
85W per channel. Gold-plated binding posts are provided for  
speaker connections.  
MAKING CONNECTIONS WITH THE AMPLIFIER  
OUTPUT  
For more information on the Dock option and how to use your RV-5  
with an iPod, refer to Section 5: Tuner, PC, & Dock Controls.  
Use bare speaker wire with the amplifier output connectors. To  
install, loosen the connector, insert the wire into the bottom of the  
receptacle, then tighten the connector.  
20 PREAMPLIFIER OUTPUTS  
Use up to 10-gauge speaker cable to ensure low-impedance  
connections between the amplifier and the speakers. Observe  
correct speaker polarity.  
Provide output for external power amplifiers for applications that  
require them.  
CAUTION!  
21 TUNER ANTENNA CONNECTORS  
Do not connect the outputs of one channel to the outputs  
of other channels or to other amplifiers. Do not  
over-tighten speaker connectors as they can break and  
will then require that the RV-5 be serviced.  
Provide two antenna connections for the AM/FM radio tuner. The  
RV-5 accessories include two antennas, one for AM stations and one  
for FM stations.  
For information on how to use the AM/FM radio tuner, refer to  
Section 5: Tuner, Dock, & PC Controls.  
UTILIZING SPARE CHANNELS  
While the amplifier can support a 7.1-channel system, it is equally  
suitable for use with 5.1-channel systems. Since 5.1-channel  
systems do not use all of the speaker outputs, the “spare” amplifier  
outputs can be used for Zone 2 operation.  
For example, if the RV-5 Receiver is used to run a 5.1-channel  
system in the main listening area, then the two rear speaker outputs  
can be used as Zone 2 left and right speakers in a second listening  
location, without the cost of an additional power amplifier.  
2-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
RV-5  
Basic Operation  
REMOTE CONTROL OVERVIEW  
TUNER, PC, & DOCK OVERVIEW  
The Tuner, PC, & Dock inputs are the only “hard-wired” inputs in  
the RV-5 Receiver. Unlike the other inputs, these three have very  
specific audio-only functionality.  
The RV-5 Receiver remote control provides full operation of the  
RV-5 including commands, such as menu navigation, that are not  
available from the front panel. It is also designed to provide control  
for the entire home theater system. This section provides a brief  
overview of the remote control functions used to control the RV-5  
Receiver. For detailed universal remote control operation,  
programming instructions, and manufacturing codes, refer to  
Appendix C.  
The Tuner input is for use with the internal AM/FM radio tuner. The  
PC input is tied to the USB input on the rear panel and is for use  
with media player software on a connected PC computer. The Dock  
input is for use with the optional D-1 Dock accessory and is tied to  
the DOCK input on the rear panel. This input is only for use with  
iPod players.  
OPERATION CONSIDERATIONS  
While all three of these inputs have devoted Remote Control menu  
controls, the front panel Tuner controls are multi-functional buttons  
that also operate the iPod functions when an iPod is plugged into  
the Dock input.  
The following factors can improve or impede remote control  
operation.  
Note the following before operating the RV-5 remote control:  
For more information about the Tuner, PC, and Dock operation,  
refer to Section 5: Tuner, PC, & Dock Controls.  
The remote control must be in line-of-sight with the front panel  
IR receiver (unless using the optional RF-1 Receiver). Eliminate  
obstructions between the remote control and the IR receiver.  
The remote control may become unreliable if strong sunlight or  
fluorescent light shines on the RV-5 IR receiver.  
For optimal performance, position the remote control within a  
30-degree angle no more than 40 to 60 feet (12.2m to 18.3m)  
from the RV-5. Placing the RV-5 inside a smoked glass cabinet  
will reduce the remote control range.  
Remote controls for different components can interfere with  
one another. Avoid using remote controls for different  
components at the same time.  
Remote control batteries should be replaced as needed.  
To control the RV-5, the touch screen of the remote control  
must be in the “LEX”, “ZONE 2”, or “TUNER” menu layers.  
The Volume +/- and Mute controls, however, are always active,  
regardless of the active menu layer. The remote control ships  
from the factory set to the “MAIN” menu layer.  
2-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Basic Operation  
Lexicon  
RV-5 MENU OVERVIEW  
MENU NAVIGATION  
When the remote control touch screen is in the  
Use the remote control arrow buttons to navigate the RV-5 menu  
structure, shown in detail in Appendix B. The Command Matrix  
Table, located later in this chapter, indicates the navigation  
commands that the remote control buttons perform when the RV-5  
command bank is activated by selecting the “LEX”, “TUNER”, or  
“ZONE 2” options on the remote control touch screen.  
MAIN MENU  
“LEX”, “TUNER”, or “ZONE 2” menu layers,  
pressing MENU or SELECT on the RV-5 remote  
control accesses the menu controls for the RV-5  
Receiver. The MAIN MENU is the root directory  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
of the RV-5 menu structure and has three branches: AUDIO  
CONTROLS, VIDEO STATUS, and SETUP.  
Navigation Functions  
Arrow  
(for “LEX”, “TUNER”, and “ZONE2” menu layers)  
Note: The DVD menu layer of the touch screen controls the Lexicon RT-20  
and RT-10, if installed.  
When a menu is open, press the remote control arrow to  
select the highlighted menu parameter. The menu parameter  
will blink to indicate that it is selected.  
The AUDIO CONTROLS menu controls the audio-specific parameters,  
such as treble and bass, as well as providing an audio status menu.  
Refer to Section 4: Audio Controls & Video Status for more  
information.  
When a menu is open, press the arrow to close the menu and,  
in most cases, open the previous menu. Subsequent presses  
continue to close the current menu and open the previous menu  
until the MAIN MENU is closed.  
The VIDEO STATUS menu is an information-only menu identifying  
the current video status of the RV-5 Receiver. For more information,  
refer to Section 4: Audio Controls & Video Status.  
When a menu is open, press the and arrow buttons to scroll  
upward and downward through the complete list of menu param-  
eters. The highlighted menu item appears in the front panel  
display. All menu items appear in the OSD. The cursor  
automatically wraps to the next menu parameter when the first or  
The SETUP menu controls all aspects of setting up the RV-5 Receiver.  
Refer to Section 3: Setup for more information.  
last menu item is passed.  
The RV-5 menu structure can be viewed on the OSD (On-Screen  
Display), which is a 480i or 480p video output signal to your monitor,  
or on the front panel 2-line display, which displays the menus one line  
at a time using the remote control navigation controls. The front panel  
2-line display can also be viewed on the OSD, in 480i resolution only.  
When a menu parameter is selected and blinking, press the and  
arrow buttons to scroll through the available parameter  
options.  
Press the SELECT button to open the menu structure, open a  
menu branch, or select a menu parameter.  
SELECT  
Press the MENU button to open the menu structure.  
Note: When the RV-5 menu structure is entered, most front panel buttons  
and the remote control buttons are disabled until the menu structure is  
exited. The exceptions are the Volume Knob and Standby Button on the  
front panel and the remote control Volume, Mute, and OFF buttons. Note  
also that the disabled condition of the remote control only affects the  
“LEX”, “TUNER”, and “ZONE 2” menu layers.  
MENU  
When the menu is open, press the EXIT button to leave the menu.  
Unlike the arrow button which closes a menu layer, the EXIT  
button completely closes the menu structure.  
EXIT  
2-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
RV-5  
Basic Operation  
REMOTE CONTROL BUTTONS  
1. Touch Screen (component and function buttons)  
2. MAIN remote control touch screen menu  
1
2
3. OFF  
9
4. VOLUME (+/-)  
5. MUTE  
6. MENU  
3
4
5
6
7
10  
11  
12  
13  
14  
15  
7. SELECT & Navigation (left, right, up, & down)  
8. Number Keypad & Enter  
9. LIGHT (back light for the remote control)  
10. ON  
11. CHANNEL  
12. Previous Channel  
13. GUIDE & INFO  
14. EXIT  
15. Transport functions (PLAY , STOP , RW , PAUSE ||, & FF )  
8
for source components  
Note: These are the names and functions for the universal remote control.  
For the RV-5 specific remote control functions, refer to the Command  
Matrix on the following page.  
Note: The number call-outs on the figure above  
correlate with the numbers listed to the right.  
2-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Operation  
Lexicon  
MENU OPTIONS  
REMOTE CONTROL LIGHT BUTTON  
Selecting a menu option can open another menu within the menu  
structure. For example, selecting SETUP from the MAIN MENU opens  
the SETUP menu.  
The remote control is fully back lit, making it very useful in low-light  
conditions. Press the LIGHT button on the right side of the remote  
to back light all of the buttons and the LCD touch screen. To turn  
off the back light, press the LIGHT button again or wait. Ten  
seconds after the last button is pressed, the back light will  
automatically shut off.  
MAIN MENU  
SETUP  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
COMMAND MATRIX  
The command matrix table, starting on the next page, lists the  
commands that each remote control button performs in each menu  
setting.  
POWER ON SETTINGS  
MENU ITEM SELECTION  
Note: A brief description of each function is given in the table but refer to  
the Table of Contents for additional information on each function. For  
additional information on using and programming the remote control,  
refer to Appendix C.  
Use the remote control arrows to navigate the menu structure.  
To select a menu item in an open menu:  
1. Press the Menu or Select buttons to enter the Menu structure.  
2. Navigate to the desired menu.  
3. Press the remote control and arrows to highlight the  
desired menu item.  
4. When the desired menu item is highlighted, press the arrow  
or SELECT button to select the highlighted item. If an option is  
selected, another menu opens. When an adjustable parameter is  
selected, the current selection will blink to indicate that it is  
selected. Use the and arrows to scroll through the available  
options for the selected parameter. When the desired parameter  
option is highlighted, press the arrow on the remote control to  
select the option.  
2-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
RV-5  
Basic Operation  
MAIN  
LEX PAGE1  
LEX PAGE2  
LEX PAGE3  
LEX PAGE4  
1
2
Menu Name -  
MAIN*  
Menu Name - LEX  
Menu Name - LEX  
Menu Name - LEX  
(iPod controls)  
Menu Name - LEX  
(PC controls)  
1
2
3
5
7
9
LEX  
L7  
EQ  
IPOD-  
PC-  
PC ꢇ  
Enters the Lexicon  
Lexicon RV-5 menu listening mode family parameter between  
layer  
Selects the Logic 7  
Toggles the Auto EQ iPod ꢇ  
4
ON & OFF.  
6
ZONE2  
STER  
Selects the Stereo  
listening mode family Autocal Preset 1  
saved values  
PRE1  
IPOD+  
PC+  
PC ꢈ  
3
4
5
Enters the Lexicon  
RV-5 Zone 2 menu  
layer  
Sets the RV-5 to the iPod ꢈ  
8
10  
TUNER  
DOLBY  
Selects the Dolby  
listening mode family Autocal Preset 2  
saved values  
PRE2  
CLIKꢀ  
PCII  
PC Play/Pause  
Enters the Lexicon  
RV-5 Tuner menu  
layer  
Sets the RV-5 to the iPod wheel click,  
counterclockwise  
TV  
DTS  
PRE3  
CLIKꢁ  
(unused)  
(Does not affect the Selects the DTS  
RV-5)  
Sets the RV-5 to the iPod wheel click,  
listening mode family Autocal Preset 3  
clockwise  
saved values  
HD  
DSP  
TREB-  
Lowers the Treble  
MENU  
iPod MENU button  
(unused)  
(unused)  
(unused)  
6
7
8
(Does not affect the Selects the DSP  
RV-5)  
listening mode family parameter  
DVD  
Enters the Lexicon  
RT-10/RT-20 menu  
AUDIN  
Selects either Digital  
or Analog Audio.  
TREB+  
Raises the Treble  
parameter  
SEL  
iPod SELECT button  
GAME  
TONE  
BASS-  
Lowers the Bass  
parameter  
II  
(Does not affect the Toggles the Tone  
RV-5)  
iPod Play/Pause  
button  
Control parameter  
between ON & OFF.  
FAV  
ZOOM  
BASS+  
Raises the Bass  
parameter  
(unused)  
9
(Does not affect the (unused)  
RV-5)  
MENU PAGE - <ACTIVE PAGE> OF <TOTAL PAGES>  
Touch or to scrolll between the menu pages  
Note: The number call-outs on the figure above  
correlate with the numbers in the adjoining table.  
10  
*The Menu Name is not a functional command. It is simply a label identifying which menu or sub-menu the touch screen currently  
displays.  
2-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Lexicon  
LEX  
PAGE1-4  
TUNER  
PAGE 1-3  
ZONE 2  
PAGE 1-3  
MAIN*  
MAIN*  
Returns to the Main layer of the remote control  
11  
12  
13  
14  
15  
16  
17  
18  
19  
OFF  
Puts the RV-5 Receiver into Standby  
11  
12  
14  
16  
18  
13  
15  
17  
19  
ON  
Turns on the RV-5 Receiver from Standby  
MUTE  
Mutes the Main Zone Volume  
(unused)  
Mutes the Zone 2  
Volume  
PREV CH  
VOL or VOL ꢃ  
CH or CH ꢃ  
GUIDE  
Main Zone  
VOL or VOL ꢃ  
Zone 2  
VOL or VOL ꢃ  
Main Zone  
MODE or MODE ꢃ  
(unused)  
Steps through the VIDEO STATUS menu  
Steps through the AUDIO STATUS menu  
INFO  
*The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or  
“ZONE 2” in order to control the RV-5 Receiver.  
Note: The number call-outs on the figure above  
correlate with the numbers in the adjoining table.  
2-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Basic Operation  
LEX  
PAGE1-4  
TUNER  
PAGE 1-3  
ZONE 2  
PAGE 1-3  
MAIN*  
MENU  
EXIT  
Enters OSD menu  
Exits OSD menu  
(unused)  
20  
21  
22  
23  
24  
25  
26  
27  
28  
REWIND  
SELECT  
Enters OSD menu,  
While in OSD menu, selects menu items  
21  
23  
25  
27  
28  
20  
ꢀꢁꢂꢃ  
Arrows  
Used for OSD menu navigation  
If not in the OSD menu structure, no function.  
22  
24  
26  
FAST FORWARD  
(unused)  
STOP  
Main Zone OFF  
Zone 2 OFF  
(unused)  
||  
PAUSE  
Changes Front panel display illumination  
(unused)  
PLAY  
*The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or  
“ZONE 2” in order to control the RV-5 Receiver.  
Note: The number call-outs on the figure above  
correlate with the numbers in the adjoining table.  
2-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Lexicon  
LEX  
PAGE1-4  
TUNER  
PAGE 1-3  
ZONE 2  
PAGE 1-3  
MAIN*  
1
Main Zone  
HD input  
Zone 2  
HD input  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
2
Main Zone  
DVD input  
Zone 2  
DVD input  
3
Main Zone  
Game input  
Zone 2  
Game input  
4
Main Zone  
Sat input  
Zone 2  
Sat input  
5
Main Zone  
Cable input  
Zone 2  
Cable input  
6
Main Zone  
DVR input  
Zone 2  
DVR input  
7
Main Zone  
CD input  
Zone 2  
CD input  
30  
31  
34  
37  
36  
40  
8
Main Zone  
Dock input  
Zone 2  
Dock input  
29  
32  
33  
35  
38  
39  
9
Main Zone  
PC input  
Zone 2  
PC input  
+10  
0
Main Zone  
Tuner input  
Zone 2  
Tuner input  
Main Zone  
Aux 1 input  
Zone 2  
Aux 1 input  
ENT  
Enter  
Main Zone  
Aux 2 input  
Zone 2  
Aux 2 input  
*The MAIN menu level does NOT control the RV-5. The remote control touch screen heading must read “LEX”, “TUNER”, or  
“ZONE 2” in order to control the RV-5 Receiver.  
Note: The number call-outs on the figure above  
correlate with the numbers in the adjoining table.  
2-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Setup  
Setup ......................................................................................... 3-2  
Display Setup ............................................................................. 3-3  
Speaker/EQ Setup ...................................................................... 3-5  
Rear Amp.................................................................................................. 3-6  
Manual ..................................................................................................... 3-6  
Semi Autocal............................................................................................. 3-6  
Full Autocal............................................................................................... 3-7  
Manual Speaker Setup................................................................ 3-9  
Speakers Menu........................................................................................ 3-10  
Speaker Distances Menu ......................................................................... 3-11  
Output Levels Menu................................................................................ 3-12  
Input Setup.............................................................................. 3-14  
Advanced Video...................................................................................... 3-20  
Listening Modes....................................................................... 3-23  
Selecting a Listening Mode ..................................................................... 3-23  
DTS + Dolby Listening Modes ................................................................. 3-23  
Available Listening Modes....................................................................... 3-24  
Listening Mode Descriptions ................................................................... 3-27  
5.1-channel & 7.1-channel Direct Inputs................................................. 3-29  
DTS & Dolby Status Displays................................................................... 3-29  
Surround Configuration ........................................................... 3-30  
Dolby Configuration................................................................. 3-32  
Mute Levels.............................................................................. 3-33  
Power On Settings ................................................................... 3-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup  
Lexicon  
SURROUND CONFIGURATION  
SETUP  
SETUP  
SURROUND CONFIG  
Selecting SETUP from  
the MAIN MENU  
opens the SETUP  
menu.  
MAIN MENU  
SETUP  
Opens the SURROUND CONFIG menu, which is used to customize  
the listening modes that are available for the currently selected input.  
See the “Surround Configuration” section found later in this chapter  
for more information.  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
DOLBY CONFIGURATION  
POWER ON SETTINGS  
SETUP  
DOLBY CONFIG  
Opens the DOLBY CONFIG menu, which is used to customize the Dolby  
listening modes to your personal preferences. See the“Dolby  
Configuration” section found later in this chapter for more  
information.  
DISPLAY SETUP  
SETUP  
DISPLAY SETUP  
Opens the DISPLAY SETUP menu, which is used to customize the  
OSD and front panel display, as well as other display-related  
parameters. See the “Display Setup” section on the following page  
for more information.  
MUTE LEVELS  
SETUP  
MUTE LEVELS  
Opens the MUTE LEVELS menu, which is used to set the mute level  
controls. See the “Mute Levels” section found later in this chapter for  
more information.  
SPEAKER/EQ SETUP  
SETUP  
SPEAKER/EQ SETUP  
Opens the SPEAKER/EQ SETUP menu, which is used to configure the  
Main Zone and Zone 2 audio output connectors for the desired  
speaker setup, set speaker cross-overs, and calibrate distances and  
output levels. See the “Speaker/EQ Setup” section found later in this  
chapter for more information.  
POWER ON SETTINGS  
SETUP  
POWER ON SETTINGS  
Opens the POWER ON SETTINGS menu, which is used to configure  
the power on volume level and the Dock auto power feature. See  
the “Power On Settings” section found later in this chapter for more  
information.  
INPUT SETUP  
SETUP  
INPUT SETUP  
Opens the INPUT SETUP menu, which is used to change input  
names, assign audio and video input connectors, select preferred  
listening modes and configure Main Zone and Zone 2 settings. See  
the “Input Setup” section found later in this chapter for more  
information.  
Note: When a source is active, changing some audio or video parameters  
may cause the Main Zone audio to briefly mute the incoming source. If  
Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute.  
3-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
RV-5  
Setup  
DISPLAY SETUP  
Selecting the SETUP menu DISPLAY SETUP option opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel display,  
and setup other display-related features.  
ON-SCREEN DISPLAY  
2-LINE OSD: 3s  
MENU TIME OUT: 30s  
MAIN MENU  
SETUP  
DISPLAY SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO CONTROLS  
SETUP  
CONNECTION: HDMI/DVI  
HDMI AUDIO OUT: NO  
ON-SCREEN DISPLAY  
FRONT PANEL DISPLAY  
FRONT PANEL DISPLAY  
BRIGHTNESS: FULL  
TIME OUT: NONE  
POWER ON SETTINGS  
CONNECTION  
ANALOG, HDMI/DVI  
HDMI AUDIO OUT  
YES, NO  
CONNECTION  
DISPLAY SETUP  
HDMI AUDIO OUT  
SETUP  
SETUP  
DISPLAY SETUP  
Selects the CONNECTION parameter, which identifies the active  
video output connectors on the RV-5 rear panel. The following list of  
conditions identify the behavior of this parameter.  
Selects the HDMI AUDIO OUT parameter, which identifies if audio is  
sent on the HDMI output. If the HDMI AUDIO OUT parameter is set  
to YES, then a two-channel DOWN MIX of the source audio is sent  
over the HDMI connection at the maximum bit rate of the display’s  
audio system. This audio stream is in addition to the normal audio  
outputs. If the parameter is set to NO, this audio is not sent.  
If ANALOG is selected, only the analog video connectors are  
available and will output the video signal.  
If HDMI/DVI is selected, both the analog and HDMI video  
connectors are available and will output the video signal.  
2-LINE OSD  
OFF, 3, 4, 5, 6 SECONDS  
ON-SCREEN DISPLAY  
2-LINE OSD  
SETUP  
DISPLAY SETUP  
If the video input is set to HDMI and the CONNECTION  
parameter is set to ANALOG, then no video is output.  
Selects the 2-LINE OSD parameter from the On-Screen Display (OSD)  
menu. The 2-Line OSD parameter identifies the length of time that  
the 2-line OSD is displayed and can be set to display from three to six  
seconds in one-second increments. If OFF is selected, then the 2-line  
OSD is not displayed.  
If the HDMI video input is copy-protected (HDCP), no video is  
output on the analog output connectors. This is a requirement  
of HDCP and not a limitation of the RV-5 Receiver.  
Note: If OFF is selected, the menu screens are still displayed. This  
parameter only affects the 2-line OSD display, which is identical to the  
front panel 2-line display.  
3-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setup  
Lexicon  
MENU TIME OUT  
NONE, 30, 40, 50, 60 SECONDS  
TIME OUT  
NONE, 1 TO 10 SECONDS  
SETUP  
DISPLAY SETUP  
SETUP  
ON-SCREEN DISPLAY  
MENU TIME OUT  
FRONT PANEL DISPLAY  
TIME OUT  
DISPLAY SETUP  
Selects the TIME OUT parameter from the Front Panel Display menu.  
This parameter identifies the length of time before the front panel  
2-line display times out. The parameter can be set from 1 to 10  
seconds in one-second increments. If NONE is selected, then the  
2-line front panel display is always on when the RV-5 is on.  
Selects the MENU TIME OUT parameter from the On-Screen Display  
(OSD) menu. This parameter identifies the length of time before the  
OSD menu times out and can be set from 30 to 60 seconds in  
ten-second increments. If NONE is selected, then the OSD will not  
turn off automatically.  
CAUTION!  
The NONE selection should only be used with caution. If  
the system includes a plasma display, or other display  
types sensitive to image burn-in, and the OSD Menu Time  
Out parameter is set to NONE, the OSD menu image can be  
burned into the monitor display.  
BRIGHTNESS  
FULL, HALF, OFF  
FRONT PANEL DISPLAY  
DISPLAY SETUP  
BRIGHTNESS  
SETUP  
Selects the BRIGHTNESS parameter from the Front Panel Display  
menu, which selects the brightness of the 2-line front panel display.  
The parameter can be set to FULL, HALF, or OFF. If set to OFF, then  
the front panel display is off.  
On the remote control, this parameter is controlled by the || (Pause)  
button while in the touch screen LEX or TUNER menus.  
Note: When the RV-5 is powered off or put into Standby mode, any  
changes to the BRIGHTNESS parameter are not saved. So when the RV-5  
is powered on or taken out of Standby mode again, the BRIGHTNESS  
parameter will be set to FULL.  
3-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
RV-5  
Setup  
SPEAKER/EQ SETUP  
Select the SPEAKER/EQ SETUP menu to configure the Main Zone audio output connectors for the desired speaker setup. The Main Zone includes eight  
audio output connectors labeled Front L/R, Center, Subwoofer, Side L/R and Rear L/R.  
SETUP  
MAIN MENU  
SPEAKER/EQ SETUP  
REAR AMP: REAR SPK  
MANUAL  
SEMI AUTOCAL  
FULL AUTOCAL  
SPEAKERS  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
AUTO SETTINGS: OFF  
FRONT L/R: 80Hz  
CENTER: 80Hz  
PERFORMS SEMI-AUTOMATIC  
CALIBRATION  
SIDE L/R: 80Hz  
REAR/Z2 L/R: 80Hz  
SUB/LFE LPF: 80Hz  
SUBWOOFERS: 1  
SUB HPF: 20Hz  
MUTE LEVELS  
POWER ON SETTINGS  
PERFORMS FULL AUTOMATIC  
CALIBRATION  
SUB MODE: NORMAL  
MANUAL  
SPEAKERS  
SPEAKER DISTANCES  
OUTPUT LEVELS  
SPEAKER DISTANCES 1  
SPEAKER DISTANCES 2  
AUTO SETTINGS: OFF  
UNITS: FEET  
SIDE LEFT: 0.0ft  
SUBWOOFERS: 0.0 ft  
FRONT LEFT: 0.0 ft  
CENTER: 0.0 ft  
FRONT RIGHT: 0.0 ft  
SIDE RIGHT: 0.0 ft  
REAR RIGHT: 0.0 ft  
REAR LEFT: 0.0 ft  
OUTPUT LEVELS 1  
OUTPUT LEVELS 2  
AUTO SETTINGS: OFF  
INPUT: ALL  
REAR LEFT: 0dB  
SIDE LEFT: 0dB  
TEST TONE: OFF  
FRONT LEFT: 0dB  
CENTER: 0dB  
SUBWOOFER1: 0dB  
SUBWOOFER2: 0dB  
FRONT RIGHT: 0dB  
SIDE RIGHT: 0dB  
REAR RIGHT: 0dB  
3-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup  
Lexicon  
Performing the Semi Autocal Procedure:  
In order to perform this test, the following initial setup is required:  
REAR AMP  
REAR AMP, ZONE 2  
SPEAKER/EQ SETUP  
REAR AMP  
SETUP  
Selects the REAR AMP parameter, which identifies how the rear  
amplifier is utilized. The amplifier can drive the rear speakers in the  
Main Zone or the Zone 2 speakers.  
All of the speakers are connected to the RV-5 and positioned in  
the listening space.  
The cross-over points for each speaker are set through the  
MANUAL setup menu. See the following section, “Manual  
Speaker Setup”, for information on how to manually set the  
cross-over points.  
To maintain 7.1-channel surround sound in the Main Zone while  
using the Zone 2 outputs, the Rear/Zone2 speaker connectors or the  
Rear Preamp outputs should be used for the Main Zone rear channels  
while the Zone 2 OUT RCA connectors are used with a second  
amplifier for the Zone 2 audio.  
A monitor is connected to the RV-5 for viewing the OSD during  
the procedure.  
The microphone, included with the RV-5, must be connected to  
the rear panel Microphone input connector and positioned in  
the primary listening position.  
MANUAL  
SPEAKER/EQ SETUP  
MANUAL  
SETUP  
For best results, install the microphone onto the accompanying rod by  
threading the two parts together and hold or place it in the primary  
listening position. Use a microphone stand or tripod if necessary.  
Opens the MANUAL speaker setup menu, which allows the manual  
selection of the speaker distances, cross-over points, and output  
levels. See the next section, “Manual Speaker Set-Up”, for more  
details.  
The Semi Autocal procedure is performed in the same manner as the  
Full Autocal procedure. Refer to the “Performing the Full Autocal  
Procedure” for more details.  
SEMI AUTOCAL  
SPEAKER/EQ SETUP  
SEMII AUTOCAL  
SETUP  
CAUTION!  
Selects the SEMI AUTOCAL procedure, which automatically sets the  
speaker distances and output levels, as well as performing system  
equalization adjustments. The cross-over points for each speaker  
must be manually set before this procedure can be run. See the next  
section, “Manual Speaker Set-Up”, for more information on how to  
set the cross-over points.  
DO NOT place the microphone too close to the speakers  
during the autocal procedure. If the microphone is within  
one foot of the speaker, the test tones that are output  
during the autocal procedure could cause a feedback loop  
which may damage the speaker. Harman Specialty Group  
assumes no responsibility for speaker damage.  
3-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
RV-5  
Setup  
FULL AUTOCAL  
CAUTION!  
SPEAKER/EQ SETUP  
FULL AUTOCAL  
SETUP  
DO NOT place the microphone too close to the speakers  
during the autocal procedure. If the microphone is within  
one foot of the speaker, the test tones that are output  
during the autocal procedure could cause a feedback loop  
which may damage the speaker. Harman Specialty Group  
assumes no responsibility for speaker damage.  
Selects the FULL AUTOCAL procedure, which automatically sets the  
speaker distances, cross-over points, and output levels, as well as  
performing system equalization adjustments.  
Note: The Full or Semi Autocal settings that are saved to the Preset  
locations include the system equalization adjustment values. However,  
even if the Auto EQ setting is active, the autocal settings for the system EQ  
do NOT apply to certain high bit-rate incoming data streams, such as 176  
kHz and 192 kHz PCM.  
The Full Autocal procedure is comprised of three parts, the Far Field  
Test, the Near Field Test, and the Subwoofer Test. Each part provides  
directions on the OSD at the start of the test, for volume level and  
microphone positioning, and each test sends test tones to the  
speakers.  
Note: Before activating the calibration, ensure that the RV-5 is NOT  
muted. If Mute is active, then the test tone calibrations will not be  
accurate.  
Performing the AUTOCAL Procedure:  
Before beginning the AUTOCAL procedure, set the RV-5 to an input  
that does not have a currently active source. There should NOT be  
an active audio track playing when the AUTOCAL procedure  
is started.  
For the Far Field test, the test tones sent to each speaker follow a  
specific order. The order of testing is Front Left, Front Right, Center,  
Side Left, Side Right, Rear Left, and Rear Right.  
In order to perform this test, the following initial setup is required:  
Note: The test tones may be loud. Be prepared before starting the Full or  
Semi Autocal procedures.  
All of the speakers are connected to the RV-5 and positioned in  
the listening space.  
The Far Field test sets the speaker distances, cross-over points, and  
output levels. The microphone is stationed in the center of the  
preferred listening area and a test tone is sent to each speaker.  
A monitor is connected to the RV-5 for viewing the OSD during  
the procedure.  
The microphone, included with the RV-5, must be connected to  
the rear panel Microphone input connector and positioned in  
the primary listening position.  
Note: If the Far Field test is skipped, the Near Field test must also be  
skipped.  
Note: For best results, install the microphone onto the accompanying  
rod by threading the two parts together and hold or place it in the  
primary listening position. Use a microphone stand or tripod if  
necessary.  
The Near Field test adjusts the RV-5, performing system equalization  
to compensate for speaker performance and placement. The  
procedure seeks to give the system a consistent tonal balance  
between the front left, front right, center, side left, side right, rear left,  
and rear right speakers, if applicable. The test calibrates each speaker  
separately, and the user individually selects each speaker to calibrate.  
3-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup  
Lexicon  
The microphone should be held within two feet of the speaker baffle  
as a test tone is sent to the speaker.  
The Subwoofer test is done in two parts. The user is instructed to  
hold the microphone to the left of the primary listening position and  
then to the right of the primary listening position. Two test tones are  
sent out to all connected subwoofers during each of the two test  
phases. Two tones are sent to ensure that subwoofers with auto  
power settings are active during the procedure.  
Note: If there are no subwoofers in the system, then this test will not pass  
and must be skipped.  
For optimum results, all noise generators in the room should be  
removed before performing the full or semi autocal procedure.  
However, air conditioners and similar steady-state background noise  
should have minimum impact on the test and can be left on.  
When the procedure is complete, the user will be prompted to save  
the settings. These settings can be saved in one of three Preset  
locations. See Section 4: Audio Controls & Video Status for more  
information on the Preset locations.  
Note: When calibration is complete, the volume level is set to a relatively  
high level. Before playing an audio track, be sure to turn the volume  
down to avoid potentially offensive or damaging volume levels.  
3-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Setup  
MANUAL SPEAKER SETUP  
Selecting the SETUP menu SPEAKER/EQ SETUP menu MANUAL option opens the MANUAL menu, which is used to manually set the speaker  
distances, cross-over points, and output levels.  
SETUP  
SPEAKER/EQ SETUP  
MANUAL  
SPEAKERS  
SPEAKERS  
SPEAKER DISTANCES  
OUTPUT LEVELS  
SPEAKER DISTANCES 1  
SPEAKER DISTANCES 2  
AUTO SETTINGS: OFF  
FRONT L/R: 80Hz  
CENTER: 80Hz  
AUTO SETTINGS: OFF  
UNITS: FEET  
SIDE LEFT: 0.0ft  
SUBWOOFERS: 0.0 ft  
FRONT LEFT: 0.0 ft  
SIDE L/R: 80Hz  
CENTER: 0.0 ft  
REAR/Z2 L/R: 80Hz  
SUB/LFE LPF: 80Hz  
SUBWOOFERS: 1  
SUB HPF: 20Hz  
FRONT RIGHT: 0.0 ft  
SIDE RIGHT: 0.0 ft  
REAR RIGHT: 0.0 ft  
REAR LEFT: 0.0 ft  
SUB MODE: NORMAL  
OUTPUT LEVELS 1  
OUTPUT LEVELS 2  
AUTO SETTINGS: OFF  
INPUT: ALL  
REAR LEFT: 0dB  
SIDE LEFT: 0dB  
TEST TONE: AUTO  
FRONT LEFT: 0dB  
CENTER: 0dB  
SUBWOOFER1: 0dB  
SUBWOOFER2: 0dB  
FRONT RIGHT: 0dB  
SIDE RIGHT: 0dB  
REAR RIGHT: 0dB  
If the Auto Settings parameter is set to ON, the parameters in that  
menu cannot be manually changed until the Auto Settings  
parameter is set to OFF.  
AUTO SETTINGS  
OFF, ON  
AUTO SETTINGS  
SPEAKER/EQ SETUP  
MANUAL  
SETUP  
Loads the values from the active preset into the speaker cross-over  
points, distances, or output level parameters. The Speakers  
(cross-over points), Speaker Distances, and Output Levels menus all  
have an Auto Settings parameter. All three are the same parameter,  
but each affects the individual sub-menus separately and  
independently of each other.  
Note: Any manual settings will be lost if the active preset settings are  
loaded; if Auto Settings is set to ON in the Speakers, Speaker Distances, or  
Output Levels menus, then previous parameter values will be overwritten.  
3-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup  
Lexicon  
include FULL, 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz  
increments.  
SPEAKERS MENU  
SPEAKERS  
SPEAKER/EQ SETUP  
MANUAL  
SETUP  
Select FULL to send a full-range signal to the front speakers.  
Otherwise, select the cross-over point closest to the -3dB  
low-frequency rating of the front speakers.  
Selecting the MANUAL SETUP menu SPEAKERS option opens the  
SPEAKERS menu, which assigns independent cross-over points for  
each Main Zone audio output connector. Front cross-over selections  
affect the Sub Mode parameter options.  
CENTER  
FULL, 40 to 120HZ, NONE  
Allows the manual selection of a cross-over point for the Main Zone  
audio output connector labeled Center. Available selections include  
NONE, FULL, 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz  
increments.  
Manual Speaker Setup Considerations:  
Select the cross-over point closest to the -3dB low frequency  
rating of the associated speakers. For example, set the FRONT  
L/R parameter to the cross-over point closest to the -3dB  
low-frequency rating of the front speakers.  
Select FULL to send a full-range signal to the center speaker.  
Otherwise, select the cross-over point closest to the -3dB  
low-frequency rating of the center speaker.  
Select the subwoofer cross-over point equal to the lowest cross-  
over point of any of the other speakers.  
When the speaker setup does not include a center speaker, select  
NONE because some listening modes are not intended to be used  
without a center channel.  
Manual Subwoofer Speaker Setup Considerations:  
All low frequencies below the speaker’s cross-over point are  
redirected from the speaker to the subwoofer(s). If the cross-over  
point is FULL, low-frequency signals, excluding LFE information, are  
not redirected to the subwoofer.  
SIDE L/R  
FULL, 40 to 120Hz, NONE  
Allows the manual selection of a cross-over point for the Main Zone  
audio output connectors labeled Side L/R. Available selections  
include NONE, FULL, 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz  
increments.  
Low frequencies between the Subwoofer and Front L/R speaker  
channels can be duplicated. However, making this selection can  
result in excessive bass. Refer to the “Sub Mode” description found  
later in this chapter for more information.  
Select FULL to send a full-range signal to the Side L/R speakers.  
Otherwise, select the cross-over point closest to the -3dB  
low-frequency rating of the Side L/R speakers.  
Note: The Semi Autocal and Full Autocal procedures leave the Subwoofer  
distance value at a default of 0.0 feet. Refer to the “Speaker Distances”  
section found later in this chapter to manually set the correct Speaker  
Distance for the subwoofers.  
When the speaker setup does not include side speakers, select  
NONE to redirect side channel signals to the Front L/R output  
connectors. If the Rear/Z2 L/R parameter is also set to NONE,  
the RV-5 will redirect surround channel signals to the Front L/R  
output connectors.  
FRONT L/R  
FULL, 40 to 120HZ  
Allows the manual selection of a cross-over point for the Main Zone  
audio output connectors labeled Front L/R. Available selections  
3-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Setup  
REAR/Z2 L/R  
FULL, 40 to 120Hz, NONE  
SUB MODE  
NORMAL, LFE+FL/FR, LFE ONLY  
Allows the manual selection of a cross-over point for the Main Zone  
audio output connectors labeled REAR/Z2 L/R. Available selections  
include NONE, FULL, 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz  
increments.  
Selects options that are available to control bass redirection. Available  
settings are NORMAL, LFE+FL/FR and LFE ONLY.  
NORMAL is the default setting when Front L/R cross-overs are set to  
any value other than FULL, and it is not user adjustable. In this mode,  
all frequencies below the cross-over point of any main speakers  
(Front, Center, Side, or Rear) are sent to the subwoofer. In addition, if  
the incoming audio stream contains an LFE (.1) channel, all  
frequencies in that channel which are below the SUB/LFE LPF cross-  
over point are also sent to the subwoofer(s).  
Select FULL to send a full-range signal to the Rear/Zone2 L/R  
speakers. Otherwise, select the cross-over point closest to the  
-3dB low-frequency rating of the Rear/Zone2 L/R speakers.  
When the speaker setup does not include rear speakers, select  
NONE to redirect rear channel signals to the Side L/R output  
connectors. If the Side L/R parameter is also set to NONE, the  
RV-5 will redirect surround channel signals to the Front L/R  
output connectors.  
When the Front L/R cross-over is set to FULL, the user has the choice  
of LFE+FL/FR or LFE ONLY.  
Note: When the Rear/Z2 L/R parameter is set to NONE, Dolby Digital  
PLIIx modes and DTS(-ES) decoding are not available.  
The default setting, LFE+FL/FR, steers all Front L/R sounds below a  
fixed cross-over point of 80Hz to BOTH the subwoofer(s) and the  
Front L/R speakers. In addition, it redirects all frequencies below the  
cross-over points of the Center, Side, and Rear speakers to the  
subwoofer(s). Finally, if the incoming audio stream contains an LFE  
(.1) channel, all frequencies in that channel which are below the  
SUB/LFE LPF cross-over point are also sent to the subwoofer(s).  
SUB/LFE LPF (LOW-PASS FILTER)  
40 to 120 Hz  
Identifies the cross-over frequency setting below which sounds that  
may be available from an LFE track are sent to the subwoofer.  
Available selections are 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz  
increments.  
The LFE ONLY setting does not send any sound to the subwoofer(s)  
other than the LFE (.1) channel, if available.  
SUBWOOFERS  
0, 1, 2  
Selects the number of subwoofers in the system. Available selections  
are 0, 1, or 2. The 0 selection is only available if the Front Left &  
Right speakers are set to FULL.  
SPEAKER DISTANCES MENU  
SPEAKER DISTANCES  
SPEAKER/EQ SETUP  
MANUAL  
SETUP  
SUB HPF (HIGH-PASS FILTER)  
15, 20, 30, 38 Hz  
Selecting the MANUAL SETUP menu SPEAKER DISTANCES option  
opens the SPEAKER DISTANCES menu, which allows the user to  
manually set the distances for each speaker. The adjustable range is  
0.0 ft (0.0 m) to 30.0 ft (9.00 m) at 0.2 ft (0.06 m) increments.  
Identifies the cross-over frequency setting above which sounds are  
sent to the subwoofer. As a general rule of thumb, the larger the  
subwoofer driver, the lower the frequency should be of the Sub HPF  
parameter. The available selections are 15, 20, 30, and 38 Hz.  
3-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Setup  
Lexicon  
The distances for each speaker - Front Left, Center, Front Right, Side  
Right, Rear Right, Rear Left, Side Left, and Subwoofers - can be set  
individually.  
INPUT  
Identifies the input that the currently displayed output levels will be  
applied to. The Input selection toggles between the currently  
selected front panel input and ALL. If the front panel input is selected,  
then only that input’s output levels are adjusted.  
Note: When the speaker distance for the Front Left speaker is adjusted  
above 20.0 feet from the shortest speaker distance, all speaker distances  
will move in conjunction from the 20.2-feet parameter point. When the  
Front Left speaker is adjusted to 20.2 feet, all other speaker distances that  
are set to 0 feet will now move to 0.2 feet. If the Front Left speaker  
distance is increased to 22 feet, all other speaker distances will move to 2  
feet (unless they are set to a higher value). If the Front Left speaker  
distance is then decreased, all other speaker distances will not change.  
Note: To set a specific input’s output levels, the input front panel button  
must be selected before the Input selection in the Output Levels menu is  
available for that specific input.  
The ALL selection functions as a virtual input – it holds values that can  
be assigned to all inputs. Each input can override the ALL value with  
its own custom settings. To assign the ALL input, it must be selected  
individually for each front panel input selection.  
UNITS  
FEET, METERS  
Identifies the units of measure of the speaker distances. FEET and  
METERS are the available selections.  
Note: If the input is set to ALL and the auto settings are turned to ON,  
then ALL takes the preset values for its settings. The Auto Settings, if set to  
ON, apply to whatever INPUT is currenly selected.  
OUTPUT LEVELS MENU  
OUTPUT LEVELS  
SPEAKER/EQ SETUP  
MANUAL  
SETUP  
TEST TONE  
OFF, AUTO, MANUAL  
Selecting the MANUAL SETUP menu OUTPUT LEVELS option opens  
the OUTPUT LEVELS menu, which allows the user to manually set the  
output levels for each speaker. The output levels can be set  
independently for each input. The adjustable range is -15 dB to +5 dB  
in 1 dB increments.  
Provides a noise signal to each speaker through either the AUTO or  
MANUAL setting. AUTO sends a rotating noise signal to each  
speaker, in the order listed in the menu. If set to AUTO, the test tone  
moves in a clockwise order around the speakers, starting from the  
front left. MANUAL sends the pink noise signal only to the speaker  
selected by the user. The OFF selection turns off the noise signal. Any  
active input source is muted while the Test Tone parameter is active  
and until the Test Tone parameter is set to OFF.  
The output levels for each speaker - Front Left, Center, Front Right,  
Side Right, Rear Right, Rear Left, Side Left, Subwoofer1, and  
Subwoofer2 - can be set individually.  
The available test tones are dependent upon the current listening  
mode. For example, if a 5.1 channel listening mode is active, then  
the rear speakers are not accessible to the Test Tone parameter.  
Note: The speaker output level settings may affect the maximum volume  
level of the RV-5 Receiver. The maximum volume level is +10 dB minus the  
maximum output level setting of any speaker. Thus, if your Front L/R  
output levels are set to +3.0 dB, then the maxium allowable volume level  
is +10 dB minus 3 dB, or +7.0 dB.  
Note: Before activating the test tones, ensure that the RV-5 is NOT muted.  
If Mute is active, then the test tone calibrations will not be accurate.  
3-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
RV-5  
Setup  
To activate the Test Tone:  
1. Press the Menu or Select button to enter the Menu structure.  
2. Select Setup from the Main menu.  
3. Select Speaker/EQ Setup.  
4. Select Manual.  
5. Select Output Levels.  
6. Press the remote control and arrows to highlight the Test  
Tone parameter.  
7. Press the remote control SELECT or arrow button to select  
the Test Tone parameter.  
8. Press the remote control arrow to select manual test tones.  
The Test Tone parameter displays MANUAL and the highlighted  
parameter is now Front Left. You should hear the test tone in  
the Front Left speaker.  
9. Press the remote control arrow to select automatic test  
tones. The Test Tone parameter displays AUTO and the  
highlighted parameter is now Front Left. You should hear the  
test tone in the Front Left speaker, then in the Center speaker,  
and so on through the list. After the last speaker, the test tone  
will return to the Front Left speaker and continue down the list  
again.  
10. To stop the Test Tone, use the remote control and arrows  
to highlight the Test Tone parameter. The parameter will  
change to OFF. The test tone can no longer be heard through  
any of the speakers.  
3-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Lexicon  
INPUT SETUP  
Selecting the SETUP menu INPUT SETUP option opens the INPUT SETUP menu, a two-screen menu which sets up the input type and name, the  
digital and analog inputs for both audio and video, the listening mode, and other advanced input settings.  
MAIN MENU  
SETUP  
INPUT SETUP 2  
INPUT SETUP 1  
INPUT: HD  
NAME: ________  
AUDIO CONTROLS  
VIDEO CONTROLS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
MODE FAMILY: STEREO  
MODE: 2-CHANNEL  
DEFAULT SUR: USE LAST  
A/D SAMPLE RATE: 48kHz  
A/V SYNC DELAY: 0 ms  
ADVANCED VIDEO  
VIDEO IN: HDMI 1  
V-PROCESS: FAROUDJA  
VIDEO OUT: AUTO  
DIG AUDIO: HDMI 1  
ADVANCED VIDEO 2  
ADVANCED VIDEO 1  
POWER ON SETTINGS  
FLESHTONE NR: ON  
COMPNT ENHANCE: ON  
BRIGHTNESS: 100  
CONTRAST: 100  
TRIGGER 2: ON  
INPUT TYPE: VCR  
ANLG AUDIO: NONE  
DIG/ANLG AUTO: ON  
SHARPNESS: 32  
ZONE-2 OUT: ANALOG  
NOISE REDUCTION: ON  
X-COLOR SUPPRESS: ON  
COLOR: 100  
DCDi INTERPOL: ON  
FILM DETECTION: ON  
FILM EDIT DETECT: ON  
information on these three inputs, refer to Section 5: Tuner, PC, &  
Dock Controls.  
INPUT  
SETUP  
INPUT  
INPUT SETUP  
Note: When a source is active, changing some audio or video parameters  
may cause the Main Zone audio to briefly mute the incoming source. If  
Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute.  
Selects between the twelve different inputs available. The input  
selected in this parameter identifies the input that is currently being  
setup or modified. Inputs can be scrolled through and modified  
without leaving the input setup menu. However, most input setup  
changes do not take affect until after the OSD menu is exited.  
NAME  
Note: Selecting a different input in the input setup menu will also change  
the front panel input selection to match. For example, if the Tuner is  
selected on the front panel and you change the Input parameter to HD,  
the front panel HD input is also selected.  
NAME  
SETUP  
INPUT SETUP  
Allows the user to customize the name of the selected input. Custom  
input names can include up to eight characters.  
Most of the inputs are interchangeable, with the exception of the  
Dock, PC, and Tuner inputs. These three inputs are “hard-wired” and  
do not allow for user selection of the Audio In parameters. For more  
Note: A custom name cannot be assigned to the Tuner input.  
3-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Setup  
To Customize the Name of the Selected Input:  
V-PROCESS  
FAROUDJA, CONV ONLY, BYPASS  
V-PROCESS  
SETUP  
INPUT SETUP  
11. Select the input and enter the Input Setup menu.  
12. Select the Name parameter. Note that a blinking square appears in  
the first letter position.  
Selects the V-PROCESS parameter, which identifies the type of video  
processing or conversion, if any, that is applied to the selected input  
source. Explanations of the available selections are listed below.  
13. Using the and arrows, scroll through the letter list until you  
find the first desired letter.  
Faroudja - Activates the Faroudja video processing feature. The video  
signals can be handled in several different ways, depending upon the  
input source.  
The letter list is arranged with Uppercase letters > lowercase  
letters > numbers > symbols. The letters are listed in alphabetical  
order and the numbers in numerical order. Most standard ASCII  
characters are included.  
A standard-definition (480i or 576i) analog signal  
(composite, S-video, or component) is digitized and sent  
to the Faroudja video processor for enhancement. The  
signal is available as both an analog component and an  
HDMI signal.  
14. Press the SELECT button or arrow to save the first letter and  
move to the next letter. A blinking square appears in the second  
letter position.  
15. Repeat Steps 2 through 4 until the complete name is entered.  
An analog component signal is digitized and sent to the  
Faroudja video processor for enhancement. The signal is  
available as both an analog component and an HDMI  
signal, but not at the analog composite or S-video  
monitor outputs.  
Note: The arrow saves the custom name. The arrow allows you to  
move forward, one space per one button press. To add a space to your  
custom name, press the SELECT button or arrow without choosing a  
letter.  
Any HDMI signal other than 1080i is sent to the Faroudja  
video processor for enhancement and is available as an  
output at both the HDMI and analog component  
outputs. Program material that carries HDCP (High-  
Bandwidth Digital Content Protection) encoding is only  
available through the HDMI output.  
Use the same procedure to edit a previously saved name.  
VIDEO IN  
VIDEO IN  
SETUP  
INPUT SETUP  
Selects the VIDEO IN parameter, which assigns one of the rear panel  
video input connectors to the current input. Available selections  
include NONE, HDMI 1-2, Component 1-3, S-Video 1-4, and  
Composite 1-4.  
HDMI signals in 1080i resolution are sent directly to the  
HDMI and analog component outputs without  
processing. Program material that carries HDCP  
encoding is only available through the HDMI output.  
The Faroudja selection delivers the best image quality when a digital  
video display is in use but it requires the use of a video display  
capable of accepting high-resolution (480p up to 1080i) signals  
through either an HDMI or component video connection.  
The HDMI Audio & Video inputs, HDMI 1 & HDMI 2, are mutually  
exclusive inputs - only one input is available at a time for each input  
location. For example, while setting up the DVD input, if HDMI 2 is  
selected for the Video Input, then HDMI 1 is not a selectable option  
for the Digital Audio Input.  
3-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup  
Lexicon  
Conv Only - Does not apply any video enhancement or processing  
to the incoming video signal, but outputs the signal in one of the  
following ways, depending on the input source.  
VIDEO OUT  
VIDEO OUT  
SETUP  
INPUT SETUP  
VIDEO OUT is a multi-purpose parameter; the function of the  
parameter depends upon the input source and the setting of the  
V-PROCESS parameter.  
A standard-definition (480i or 576i) analog signal  
(composite, S-video, or component) is converted so  
that it is available as an HDMI signal at its input  
resolution, as well as at the standard S-video,  
composite, or component analog video outputs.  
When the V-PROCESS parameter is set to BYPASS or CONV ONLY, the  
VIDEO OUT parameter is a non-adjustable status display of the video  
resolution of the output signal, as determined by the input.  
An analog component signal is digitized and output at  
its input resolution through the HDMI outputs and as  
an analog component signal, but not through the  
analog composite or S-video monitor outputs.  
When the Faroudja video processing is selected for the V-PROCESS  
parameter and the output is set to HDMI or component format,  
VIDEO OUT becomes an active user-selectable parameter which  
identifies the video output resolution. Available selections are AUTO,  
1080i, 720p, and 480p.  
HDMI signals are output through both the HDMI and  
analog component outputs. Program material that  
carries HDCP encoding is only available through the  
HDMI output.  
Bypass – Does not apply any video enhancement or processing to  
the incoming video signal, but outputs the signal in one of the  
following ways, depending on the input source.  
For HDMI inputs, the AUTO option automatically selects the highest  
output resolution supported by the HDMI-equipped monitor. For  
component inputs with copy protection, the component output is  
restricted to the resolution format of the incoming component  
signal.  
Analog signals (composite, S-video, or component) are  
output only in the resolution and format that matches  
the input.  
Note: If VIDEO OUT is set to AUTO when the component input is not copy  
protected, the component output is always set to 1080i format. If the  
video monitor does not support 1080i format, the signal will not display  
correctly.  
HDMI input signals are output through the HDMI and  
analog component outputs. Program material that  
carries HDCP encoding is only available through the  
HDMI output.  
Note: If you are not getting the expected resolution options for your video  
monitor, it may be caused by an incompability between the input setup  
selections and the incoming signal. Refer to the Video Resolutions Table in  
Section 6: Troubleshooting and Maintenance for more detailed  
information.  
3-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RV-5  
Setup  
The parameter, when set to ON, identifies if there is both a digital  
and analog signal present to the input. If this condition is true, then  
the RV-5 prioritizes the digital signal over the analog signal. When the  
digital signal is interrupted, then it switches to the analog signal.  
DIG AUDIO  
DIG AUDIO  
SETUP  
INPUT SETUP  
Selects the DIG AUDIO parameter, which assigns one of the rear  
panel digital audio input connectors to the current input. Available  
selections include NONE, Optical 1-4, Coaxial 1-4, and HDMI 1-2.  
Note: Digital/analog auto switching is not selectable for the Tuner, Dock,  
and PC inputs. Refer to Section 5: Tuner, PC, & Dock Controls for more  
information.  
The HDMI Audio & Video inputs, HDMI 1 & HDMI 2, are mutually  
exclusive inputs - only one input is available at a time for each input  
location. For example, while setting up the DVD input, if HDMI 2 is  
selected for the Video Input, then HDMI 1 is not a selectable option  
for the Digital Audio Input.  
MODE FAMILY  
LOGIC 7, DOLBY, DTS, DSP, STEREO  
SETUP  
MODE FAMILY  
INPUT SETUP  
Identifies the Surround Mode Family that is initially applied to the  
incoming audio streams for the currently selected input. Other  
surround mode families may still be applied. For more information,  
refer to the “Listening Modes” section found later in this chapter.  
Note: Digital Audio is not selectable for the Tuner, PC, and Dock inputs.  
Refer to Section 5: Tuner, PC, & Dock Controls for more information.  
Note: The Mode Family and Modes are connected. The Modes are driven  
by the Mode Family selection as well as by the incoming audio source. The  
current running data stream dictates what Mode Family options are  
available for selection.  
ANLG AUDIO  
ANLG AUDIO  
SETUP  
INPUT SETUP  
Selects the ANLG AUDIO parameter, which assigns one of the rear  
panel analog audio input connectors to the current input. Available  
selections include NONE, Analog 1-6, 7.1 Analog, and 5.1 Analog.  
MODE  
MODE  
SETUP  
INPUT SETUP  
Note: Analog audio is not selectable for the Tuner, Dock, and PC inputs.  
Refer to Section 5: Tuner, PC, & Dock Controls for more information.  
Identifies the Listening Mode that is initially applied to the incoming  
audio streams for the currently selected Mode Family. Other listening  
modes may still be applied. For more information, refer to the  
“Listening Modes” section found later in this chapter.  
DIG/ANLG AUTO  
OFF, ON  
DIG/ANLG AUTO  
SETUP  
INPUT SETUP  
Note: The Mode Family and Modes are connected. The Modes are driven  
by the Mode Family selection as well as by the incoming audio source. The  
current running data stream dictates what Mode Family options are  
available for selection.  
Selects the DIG/ANLG AUTO parameter, which identifies if the RV-5  
should switch to an analog signal source for an input where the  
digital input source has been interrupted. This feature is particularly  
useful with certain cable set-top boxes where the signal is normally  
digital but occasionally changes to analog.  
3-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup  
Lexicon  
DEFAULT SUR  
STANDARD, USE LAST  
ADVANCED VIDEO  
DEFAULT SUR  
ADVANCED VIDEO  
SETUP  
INPUT SETUP  
SETUP  
INPUT SETUP  
Identifies the Default Surround Mode that is activated when a digital  
source is selected. The STANDARD parameter activates the  
“standard” decoder of the source input. The USE LAST selection  
allows the RV-5 software to “remember” the last used listening mode  
for any given input source. Once selected, that mode will always be  
active on the corresponding input until another listening mode is  
selected. This parameter affects all inputs.  
Selects the ADVANCED VIDEO menu, which provides fine-tuning  
adjustments to the video output. For more information, refer to the  
next section, “Advanced Video”.  
Note: Most of the Advanced Video parameters are only available when the  
V-Process parameter is set to FAROUDJA.  
TRIGGER 2  
OFF, ON  
Note: If the LOGIC 7 DEFAULT parameter in the SURROUND CONFIG  
menu is set to ON, the USE LAST selection is defeated and the listening  
mode will always switch to a LOGIC 7 mode. For normal functionality  
with the USE LAST selection, make sure that the LOGIC 7 DEFAULT  
parameter is set to OFF.  
TRIGGER 2  
SETUP  
INPUT SETUP  
Selects the TRIGGER 2 parameter, which configures the Trigger  
OUT 2 connector on the rear panel. This trigger output can be  
configured independently for each input so that a trigger voltage  
signal is sent to the Trigger Out 2 connector when a specific input is  
selected. If the Trigger 2 parameter is set to ON, it will output its  
voltage when the associated input is activated in the Main Zone. It  
is not activated by Zone 2 input switching. The default for the  
Trigger 2 parameter is OFF.  
A/D SAMPLE RATE  
48 KHZ, 96 KHZ  
A/D SAMPLE RATE  
SETUP  
INPUT SETUP  
The RV-5 converts the incoming analog audio signals to digital audio  
for all audio processing. The A/D SAMPLE RATE parameter allows you  
to select the sample rate of the A/D converters. Some surround  
processing modes, such as those in the DSP Mode Family, are only  
available at the 48 kHz sampling rate. This setting is only available for  
incoming analog audio streams and does not apply to any of the  
ANALOG BYPASS modes.  
ZONE-2 OUT  
SETUP  
ANALOG, DOWN MIX  
ZONE-2 OUT  
INPUT SETUP  
Identifies the type of audio that is sent to the Zone 2 outputs. The  
ANALOG setting is a straight bypass of the Main Zone stereo analog  
audio to the Zone 2 outputs. DOWN MIX provides a stereo DOWN  
MIX of the incoming audio to the Zone 2 outputs. DOWN MIX,  
which should be selected for digital or multi-channel analog  
sources, is only available if the Main Zone has an input selected that  
will accept a down mixed source. The ZONE 2 OUT parameter is  
NOT input-specific; a selection made for one input will be reflected  
in ALL inputs.  
A/V SYNC DELAY  
0 TO 180 mS  
A/V SYNC DELAY  
SETUP  
INPUT SETUP  
Delays the audio until it matches the on-screen video. Select a value  
to activate an audio signal delay to compensate for video that is  
delayed relative to the audio. The A/V sync delay range is 0 to 180 ms  
in 1 ms increments. Each input has an independent A/V Sync Delay  
parameter.  
3-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
RV-5  
Setup  
Note: If you have 5.1-channel or 7.1-channel ANALOG AUDIO assigned  
to an Input using the BYPASS listening mode, only the Front Left and Front  
Right channels will be sent to Zone 2 OUT with the ANALOG setting. In  
this condition, DOWN MIX is not available.  
If the Zone 2 input is NOT the same as the Main Zone input,  
but the Zone 2 ANLG AUDIO IN parameter is set to any of the  
six stereo analog input connectors, then Zone 2 will output the  
independent analog audio for that input.  
The Main Zone and Zone 2 inputs are inter-related. For example,  
there is only one HD input that is accessible in both the Main Zone  
and Zone 2; there are NOT two separate HD inputs. Therefore, to  
set the ZONE 2 OUT in a Main Zone input, the same Zone 2 input  
must also be selected.  
The Tuner, PC, & Dock inputs are special cases that do not quite  
function exactly as noted above. The ZONE-2 OUT parameter is  
preset to ANALOG and cannot be changed to DOWN MIX.  
Since the Tuner, PC, & Dock inputs operate independently of all  
other inputs...  
DOWN MIX is only available if the following conditions exist:  
Zone 2 is ON (or the Zone 2 OFF button is not lit).  
Zone 2 has the same input selected as the Main Zone.  
Any of the three may be selected in Zone 2 regardless of what is  
playing in the Main Zone.  
If the Main Zone audio is ANALOG, it is not set to a BYPASS  
listening mode.  
Any combination of these three inputs can be selected in the  
Main Zone and Zone 2, including selecting any one them for  
both Zones simultaneously.  
If the ZONE-2 OUT parameter is set to ANALOG and an input has  
stereo analog audio assigned to it (ANALOG 1 to ANALOG 6  
connectors), then choosing that input in Zone 2 will allow it to play  
the assigned ANALOG audio, regardless of what is playing in the  
Main Zone.  
If one of these three inputs is playing in the Main Zone, any  
other ANALOG input can be chosen for Zone 2.  
If the ZONE-2 OUT parameter is set to DOWN MIX, selecting an  
input in Zone 2 will have one of the following results:  
If the Zone 2 input is the same as the Main Zone input, then  
Zone 2 will output a DOWN MIX of the Main Zone audio.  
If the Zone 2 input is NOT the same as the Main Zone input,  
but the Zone 2 DIG AUDIO IN parameter is the same as the  
selected Main Zone input, then Zone 2 will output a DOWN  
MIX of the Main Zone audio.  
If the Zone 2 input is NOT the same as the Main Zone input,  
but the Zone 2 ANLG AUDIO IN parameter is set to 5.1  
ANALOG or 7.1 ANALOG, then Zone 2 will output a DOWN  
MIX of the Main Zone audio.  
3-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup  
Lexicon  
ADVANCED VIDEO  
Selecting the SETUP menu INPUT SETUP menu ADVANCED VIDEO option opens the ADVANCED VIDEO menu, a two-screen menu which  
provides user-adjustable controls for sharpness, noise reduction, brightness, and other video fine-tuning.  
Note: Most of the Advanced Video parameters are only available when the V-Process parameter is set to FAROUDJA.  
SETUP  
INPUT SETUP  
ADVANCED VIDEO 2  
ADVANCED VIDEO 1  
FLESHTONE NR: ON  
COMPNT ENHANCE: ON  
BRIGHTNESS: 100  
CONTRAST: 100  
INPUT TYPE: VCR  
SHARPNESS: 32  
NOISE REDUCTION: ON  
X-COLOR SUPPRESS: ON  
COLOR: 100  
DCDi INTERPOL: ON  
FILM DETECTION: ON  
FILM EDIT DETECT: ON  
DIG CAM – Use with digital camcorders or still-image cameras.  
ANLG CAM – Use with analog camcorders.  
INPUT TYPE  
SETUP  
INPUT SETUP  
INPUT TYPE  
ADVANCED VIDEO  
Refer to the table on the following page for the default video source  
settings.  
Identifies the type of device being used for the input source. Once  
the selection is made, the advanced video settings will change to  
default settings that are best suited for that type of device. Manual  
changes to these settings may also be made. The input types  
available for selection are:  
SHARPNESS  
0 TO 100  
SETUP  
INPUT SETUP  
SHARPNESS  
ADVANCED VIDEO  
Adjusts the degree to which the enhancement circuits that adjust the  
high-frequency content of the signal are applied. The setting acts on  
the vertical and horizontal as well as luminance and chrominance  
parameters to offer an enhanced depth in the picture as well as  
greater small object detail. In general, the lower settings are  
applicable for digital displays and sources, while the higher settings  
may be preferred for CRT-based displays and digital sources. The  
Sharpness adjustment range is 0 to 100 in single increments.  
DVD – Use with the output signal of a typical DVD player.  
VCR – Use with the output signal of an analog videocassette  
recorder.  
DIG CABLE – Use with digital cable set-top boxes. Even when a  
digital cable system is in use, there may be a mix of digital and  
analog channels. Start with this configuration and then change  
the advanced video options as needed to tailor the output to  
your preferences.  
DIG SAT – Use with digital satellite system set-top boxes.  
ANLG CABLE – Use with analog cable set-top boxes.  
ANLG SAT – Use with analog satellite system set-top boxes.  
3-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Most of the following Advanced Video parameters are simple ON/OFF toggle switches that apply to each input independently.  
Setup  
DIG  
DIG  
SAT  
ANLG  
ANLG  
SAT  
DIG  
ANLG  
CAM  
FEATURE  
Noise Reduction  
DVD  
VCR  
CABLE  
CABLE  
CAM  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
X-Color Suppressor  
DCDi Interpolation  
Film Mode Detect  
Film Mode Edit Detect  
Component Video Enhancement  
Fleshtone NR  
NOISE REDUCTION  
OFF, ON  
DCDi INTERPOL  
OFF, ON  
DCDi INTERPOL  
ADVANCED VIDEO  
SETUP  
INPUT SETUP  
NOISE REDUCTION  
SETUP  
INPUT SETUP  
ADVANCED VIDEO  
Directional Correlation De-interlacing (DCDi) Interpolation is a  
Faroudja technology that examines each pixel for the optimal  
direction from which to interpolate the video information, with  
regard to local edges. This adaptive process prevents the appearance  
of staircasing and the jagged edges that are often visible with other  
means of de-interlacing.  
Reduces the video noise often present in analog input sources.  
OFF, ON  
X-COLOR SUPPRESS  
X-COLOR SUPPRESS  
ADVANCED VIDEO  
SETUP  
INPUT SETUP  
Reduces the cross-color interference that typically appears in  
composite video sources as moire’ in finely detailed objects. Moire’  
effect is a visual perception that occurs when viewing a set of lines or  
dots superimposed upon another set of lines or dots, where the sets  
differ in relative size, angle, or spacing.  
FILM DETECTION  
OFF, ON  
SETUP  
INPUT SETUP  
ADVANCED VIDEO  
FILM DETECTION  
Detects the presence of film-originated material so that the original  
film-frame sequence may be recovered by weaving together the  
appropriate video fields.  
3-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setup  
Lexicon  
FILM EDIT DETECT  
OFF, ON  
COLOR  
50 TO 150  
SETUP  
INPUT SETUP  
FILM EDIT DETECT  
SETUP  
ADVANCED VIDEO  
INPUT SETUP  
ADVANCED VIDEO  
COLOR  
Applies additional processing when film-based material is detected  
so that any disruption in the frame sequence of film-based material  
due to video edits or overlay of video text over film is compensated  
for by processing, before artifacts such as feathering may appear.  
Changes the color of the video to compensate for over- or under-  
color saturation conditions. The COLOR adjustment range is 50 to  
150 in single increments.  
FLESHTONE NR  
OFF, ON  
SETUP  
INPUT SETUP  
FLESHTONE NR  
ADVANCED VIDEO  
Selects the Fleshtone NR (Noise Reduction) parameter, which  
preserves the detail in faces and flesh tones while reducing noise in  
the total picture.  
COMPNT ENHANCE  
OFF, ON  
SETUP  
INPUT SETUP  
COMPNT ENHANCE  
ADVANCED VIDEO  
Selects the Component Video Enhance parameter, which processes  
incoming component video signal to adjust the high-frequency  
content of the signal resulting in enhanced depth in the picture as  
well as greater small object detail.  
BRIGHTNESS  
50 TO 150  
SETUP  
INPUT SETUP  
BRIGHTNESS  
ADVANCED VIDEO  
Changes the video level to a darker or brighter setting. The  
BRIGHTNESS adjustment range is 50 to 150 in single increments.  
CONTRAST  
50 TO 150  
SETUP  
INPUT SETUP  
CONTRAST  
ADVANCED VIDEO  
Changes the black level of the video to compensate for poor  
contrast. The CONTRAST adjustment range is 50 to 150 in single  
increments.  
3-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
RV-5  
Setup  
LISTENING MODES  
The RV-5 has a large selection of listening modes to choose from. The list of available listening modes is broken into two parts - the Mode Family  
and the Mode. The available listening modes vary depending upon the Mode Family selections, the input setup, and the incoming audio signal.  
The RV-5 features the ability to turn off selected listening mode families so that those options do not appear in the list of available listening modes.  
See the following section, “Surround Configuration”, for more information. The RV-5 also features the ability to modify elements of the Dolby  
listening modes, PLIIx and PLII, to better suit your listening preference. See the “Dolby Configuration” section found later in this chapter for more  
information.  
The RV-5 process of signal identification and listening mode selection  
is shown below:  
SELECTING A LISTENING MODE  
The Input Setup menu allows the user to select the initial listening  
mode and mode family that will be applied to any incoming data  
RV-5 identifies  
stream on that specific input. However, setting the input Mode  
Family and Mode parameters does not prevent other listening modes  
from being available through the Mode buttons.  
Incoming Signal  
incoming signal  
RV-5 identifies which  
surround modes have  
been turned off  
The Front Panel Mode and buttons allow the user to quickly  
scan through the available listening modes in the selected family for a  
given input or incoming data stream. The Remote Control Channel  
and buttons perform the same function.  
RV-5 builds the  
available mode list  
To select a different Mode Family, the remote control touch screen  
must be set to the first page of the LEX menu. Then selecting the  
DOLBY, DTS, DSP, or STER from the touch screen switches the Mode  
button selections to any listening modes available for each of those  
families, respectively.  
DTS + DOLBY LISTENING MODES  
When a DTS soundtrack is playing, the Mode Family menu for DTS  
contains two options. The DTS selection provides the currently  
available DTS listening modes. The Dolby selection contains two  
additional listening modes: DTS + PLIIx Film and DTS + PLIIx Music.  
Note: These DTS + Dolby listening modes are ONLY available when the  
incoming data stream is DTS.  
3-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Setup  
Lexicon  
AVAILABLE LISTENING MODES  
The following table provides a complete listing of the listening modes available for each of the incoming audio or video formats currently available.  
Shaded cells indicate that there are no available modes in that Mode Family for that specific incoming data stream.  
Note: The table identifies all of the possible formats, but depending upon the Input setup and the Surround Configuration of the RV-5, all of these modes may  
not be available for selection.  
Incoming PCM  
Datastream  
Dolby  
DTS  
Logic 7  
DSP  
Stereo  
PLIIx Film, Music, & Game  
PLII Film, Music, & Game  
Pro Logic  
VS 2-SP REF & WIDE  
VS 3-SP REF & WIDE  
VS 4-SP WIDE  
PCM 32kHz  
Hall 1 5ch  
Hall 1 6ch  
Hall 2 5ch  
Hall 2 6ch  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
Logic 7 5CH FILM  
Logic 7 5CH MUSIC  
PCM 44.1/48kHz  
2-channel  
Neo 6: 6ch Cinema  
Neo 6: 6ch Music  
Neo 6: 5ch Cinema  
Neo 6: 5ch Music  
Neo 6: 3ch Cinema  
VS 5-SP WIDE  
2-ch Stereo  
5-ch Stereo  
7-ch Stereo  
PCM 88.2kHz  
2-channel  
PLIIx Film, Music, & Game  
PLII Film, Music, & Game  
Pro Logic  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
Logic 7 5CH FILM  
Logic 7 5CH MUSIC  
PCM 96kHz  
2-channel  
2-ch Stereo  
5-ch Stereo  
7-ch Stereo  
PCM 176.4/192kHz  
2-channel  
PCM 44.1/48kHz  
5.1-channel  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
PCM 88.2kHz  
5.1-channel  
PLIIx Film & Music  
PCM MULTI**  
PCM 96kHz  
5.1-channel  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
**With PCM 5.1 audio input, one additional listening mode is available - the AUDIO STATUS menu indicates that the audio is PCM 3/2.1, the mode family is PCM MULTI, and the mode is  
STANDARD, which applies only bass management and tone controls to the incoming PCM 5.1 audio.  
3-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
RV-5  
Setup  
Incoming DOLBY  
Datastream  
Dolby  
DTS  
Logic 7  
DSP  
Stereo  
VS 2-SP REF & WIDE  
DOLBY DIGITAL  
Dolby Digital 1.0  
DOLBY D STEREO  
PLIIx Film, Music, & Game  
PLII Film, Music, & Game  
Pro Logic  
Dolby Digital 2.0  
VS 2-SP REF & WIDE  
VS 3-SP REF & WIDE  
VS 4-SP WIDE  
VS 5-SP WIDE  
DOLBY DIGITAL  
PLIIx Film & Music  
Digital EX  
DOLBY DIGITAL  
DOLBY D STEREO  
VS 2-SP REF & WIDE  
VS 4-SP WIDE  
Dolby Digital 4.1  
Dolby Digital 5.0  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
Logic 7 5CH FILM  
Logic 7 5CH MUSIC  
D+PLIIX Film & Music  
Digital EX  
DOLBY DIGITAL  
DOLBY D STEREO  
VS 2-SP REF & WIDE  
VS 3-SP REF & WIDE  
VS 4-SP WIDE  
VS 5-SP WIDE  
D+PLIIX Film & Music  
Digital EX  
Dolby Digital 5.1  
DOLBY DIGITAL  
DOLBY D STEREO  
VS 2-SP REF & WIDE  
VS 3-SP REF & WIDE  
VS 4-SP WIDE  
VS 5-SP WIDE  
3-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup  
Lexicon  
Incoming DTS  
Datastream  
Dolby  
DTS  
Logic 7  
DSP  
Stereo  
DTS-ES MATRIX  
DTS  
DTS 5.1 MATRIX  
DTS STEREO  
DTS+PLIIx Film & Music*  
DTS 96/24  
DTS 96/24 ST  
DTS NEO:6  
DTS 96/24  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
Logic 7 5CH FILM  
Logic 7 5CH MUSIC  
*These modes are only  
available when a DTS source is  
playing and the Dolby Mode  
Family button is pressed on  
the remote.  
DTS-ES DISCRETE  
DTS  
DTS STEREO  
DTS 6.1 DISCRETE  
DTS NEO:6  
DTS  
DTS STEREO  
DTS 5.1 and  
DTS 20-bit 5.1 ch CD  
Incoming ANALOG  
Datastream  
Dolby  
DTS  
Logic 7  
DSP  
Stereo  
PLIIx Film, Music, & Game  
PLII Film, Music, & Game  
Pro Logic  
VS 2-SP REF & WIDE  
VS 3-SP REF & WIDE  
VS 4-SP WIDE  
Analog, 2-channel  
2-ch Stereo  
2-ch Bypass*  
5-ch Stereo  
7-ch Stereo  
48kHz sample rate  
Hall 1 5ch  
Hall 1 6ch  
Hall 2 5ch  
Hall 2 6ch  
Neo 6: 6ch Cinema  
Neo 6: 6ch Music  
Neo 6: 5ch Cinema  
Neo 6: 5ch Music  
Neo 6: 3ch Cinema  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
Logic 7 5CH FILM  
Logic 7 5CH MUSIC  
*The 2-ch Bypass mode is  
ONLY available if the Tone  
Controls parameter is set to  
OFF.  
VS 5-SP WIDE  
PLIIx Film, Music, & Game  
PLII Film, Music, & Game  
Pro Logic  
Analog, 2-channel  
96kHz sample rate  
5-CHANNEL  
5.1-ch Bypass  
Analog, 5-channel  
48kHz & 96kHz sample rate  
Logic 7 7CH FILM  
Logic 7 7CH MUSIC  
5-CHANNEL  
5.1-ch Bypass  
7-CHANNEL  
7.1-ch Bypass  
PLIIx Film & Music  
Analog, 7-channel  
48kHz & 96kHz sample rate  
3-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Setup  
LISTENING MODE DESCRIPTIONS  
The following table provides a brief description of each listening mode.  
Logic 7 Film  
Logic 7 Music  
A proprietary Lexicon technology, Logic 7 is an advanced mode that extracts the maximum surround information from either surround-encoded pro-  
grams or conventional stereo material. Film 7.1 and Music 7.1 are tailored specifically for use with rear speakers, while Film 5.1 and Music 5.1 are spe-  
cifically formatted for use without rear speakers. The Film modes should be used with any source that contains Dolby Surround or similar matrix  
encoding to experience increased center channel intelligibility and more accurate placement of sounds with fades and pans. The Music modes  
enhance the listening experience by presenting a wider front soundstage and greater rear ambience. Both Logic 7 modes also direct low-frequency  
information to the subwoofer (if installed and configured) to deliver maximum bass impact. Logic 7 adds additional bass enhancement that circulates  
low frequencies in the 40 Hz to 120 Hz range to the front and surround speakers to deliver a less localized soundstage that seems broader and wider  
than when the subwoofer is the sole source of bass energy.  
Note: Logic 7 Film is designed for use with a center channel. If your speaker system does not have a center channel, then use Logic 7 Music.  
Dolby Digital  
Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated  
low-frequency effects channel. This mode does not use the rear speakers.  
Dolby Digital EX  
Available when the receiver is configured for 7.1-channel operation, Dolby Digital EX is an extended version of Dolby Digital. When used with movies  
or other programs that have special encoding, Dolby Digital EX reproduces specially-encoded soundtracks so that a full 7.1 sound field is available.  
Even if a source does not contain specific EX encoding, the special algorithm may be used to derive a 7.1-channel output.  
Dolby Pro Logic II  
Film  
Music  
Game  
Pro Logic  
Dolby Pro Logic II decodes full-range, discrete, left, center, right, right surround, and left surround channels from matrix surround-encoded programs  
and conventional stereo sources. The Dolby Pro Logic II Film mode is optimized for movie soundtracks, while the Pro Logic II Music mode should be  
used with musical selections. The Pro Logic II Game mode is designed to enhance the soundtrack of video games for either dedicated consoles or  
computers. The Pro Logic mode re-creates the original Pro Logic processing for those who prefer that presentation format.  
Dolby Pro Logic IIx  
Film  
Music  
Game  
Dolby Pro Logic IIx is the latest extension of Dolby Laboratory’s benchmark matrix surround technology, which creates a discrete 7.1 sound field from  
matrix surround or two-channel stereo sources when your system is configured for surround back speakers. Film, Music, and Game versions are  
available that customize the processing to the type of source in use. These modes may also be used to create 7.1 sound fields from 5.1 digital  
soundtracks.  
Dolby Virtual Speaker  
Reference  
Wide  
Dolby Virtual Speaker technology uses a next-generation advanced algorithm to reproduce the dynamics and surround sound effects of a precisely  
placed 5.1-channel speaker system using only front left and right speakers. In the Reference mode, the apparent width of the sound across the front  
image is defined by the distance between the two speakers. The Wide mode provides a wider, more spacious front image when the two speakers are  
close together. Depending upon the number of speakers available in your system, a variety of different sound field options are available for both the  
Reference and Wide modes.  
DTS 5.1  
When the speaker configuration is set for 5.1-channel operation, the DTS 5.1 mode is available when DVD, audio-only music, or laser discs encoded  
with DTS data are played. DTS 5.1 provides up to five separate main audio channels and a special dedicated low-frequency effects channel.  
DTS-ES 6.1 Matrix  
DTS-ES 6.1 Discrete  
When the speaker configuration is set for 7.1-channel operation, playback of a DTS-encoded program source will automatically trigger the selection of  
one of the two DTS-ES modes. Newer discs with special DTS-ES Discrete-encoding will be decoded to provide six discrete, full-bandwidth channels  
plus a separate low-frequency effects channel. All other DTS discs will be decoded using the DTS-ES Matrix mode, which creates a 6.1-channel sound  
field from the original 5.1-channel soundtrack.  
3-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup  
Lexicon  
DTS Neo:6 Cinema  
DTS Neo:6 Music  
These two modes are available when any analog source is playing to create a three-channel, five-channel, or six-channel surround presentation from  
conventional Matrix-encoded and traditional Stereo sources. Select the Cinema version of the Neo:6 when a program with any type of Matrix  
surround encoding is present. Select the Music version of Neo:6 for optimal processing when a non-encoded, two-channel stereo program is being  
played.  
DTS Neo:6  
The DTS Neo:6 mode is designed for use with matrix-encoded digital signals. This mode is available when Digital DTS 96/24, DTS 5.1, and DTS 20-bit  
5.1 CH CD data streams are active. DTS Neo:6 derives six channels when both side and rear speakers are present (rear speakers will be in parallel). It  
derives five channels when only side speakers are present.  
DTS 96/24  
DTS 96/24 is available on specially-encoded (and labeled) optical discs that offer five channels of audio with a 96kHz sampling rate that delivers greatly  
improved audio performance. When a DTS 96/24 disc is in use and the player is connected with a digital link, the mode is selected automatically.  
Hall 1 & Hall 2  
The Hall modes, for both 5-channel and 7-channel systems, create sound fields that resemble a small-(Hall 1) or medium-sized (Hall 2) concert hall.  
5-Channel Stereo  
7-Channel Stereo  
This mode takes advantage of multiple speakers to place a stereo signal at both the front and back of a room. Ideal for playing music in situations such  
as a party, it places the same signal at the front-left and surround-left, and front-right and surround-right speakers. The center channel is fed a summed  
mono mix of the in-phase material of the left and right channels. If the RV-5 has been configured for 6.1-/7.1-channel operation, both of these options  
are available for selection. If the RV-5 has been configured for 5.1-channel operation, only the 5-Channel Stereo option is available.  
2-Channel Stereo  
This mode turns off all surround processing and presents pure left- and right-channel stereo programs. The bass management processing that routes  
low frequencies to the subwoofers is still active.  
2-Channel Stereo  
Bypass  
This mode turns off all surround processing and present pure left- and right-channel stereo programs. The bass management processing that routes  
low frequencies to the subwoofers is still active. This mode does not allow any user modification of the audio, such as Bass or Treble adjustments.  
Note: This mode is only available when the Tone Controls are set to OFF.  
3-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RV-5  
Setup  
5.1-CHANNEL & 7.1-CHANNEL DIRECT INPUTS  
DTS & DOLBY STATUS DISPLAYS  
There are four listening modes available for use with surround  
sources such as DVD-Audio, SACD, HD-DVD, or Blue-ray players.  
These listening modes are for use when the RV-5 8-channel direct  
inputs are in use. We recommend you use these listening modes  
under the following conditions:  
The upper right-hand corner of the front panel 2-line display may  
indicate status information regarding the incoming source. If a  
Dolby or DTS source is input and the RV-5 is configured to a  
surround system, the following status indicators may be displayed  
to indicate the state of the incoming source:  
5.1-CH BYPASS - Use this listening mode when the Rear L/R  
inputs are NOT in use and the input source device has its own  
internal bass management system. The incoming audio stream  
passes from the source directly through to the volume control  
without any analog-to-digital conversion. This mode also mutes  
the unusued input jacks to prevent unwanted noise from  
interfering with system performance.  
ES-ON: Indicates when an encoded DTS signal, discrete or  
matrix, is input to the surround back channels. “ON” indicates  
that the condition exists, or is active; “OF” indicates that the  
condition does not exist, or is off.  
DS-ON: Indicates when the input signal is encoded with Dolby  
Surround under the Dolby 2.0 standard. “ON” indicates that  
the condition exists, or is active; “OF” indicates that the  
condition does not exist, or is off.  
5-CHANNEL - Use this listening mode when the input source  
device does NOT have its own internal bass management  
system. In this mode, the analog source is converted to digital  
so that it uses the same bass management options for the direct  
input as used for all other inputs. If all eight channel direct  
inputs are in use, then audio from the REAR L/R inputs will be  
redirected to the side speakers.  
EX-ON: Indicates when Dolby Surround EX is input with the  
digital stream, if a surround channel (3/2 or 2/2) exists. “ON”  
indicates that the condition exists, or is active; “OF” indicates  
that the condition does not exist, or is off.  
7.1-CH BYPASS - Use this listening mode when the 8-channel  
direct inputs are in use and the input source device has its own  
internal bass management system. The incoming audio stream  
passes from the source directly through to the volume control  
without any analog-to-digital conversion.  
7-CHANNEL - Use this listening mode when the 8-channel  
direct inputs are in use and the input source device does NOT  
have its own internal bass management system. In this mode,  
the analog source is converted to digital so that it uses the same  
bass management options for the direct input as used for all  
other inputs.  
3-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup  
Lexicon  
SURROUND CONFIGURATION  
Selecting the SETUP menu SURROUND CONFIG option opens the Surround Configuration menu, which is used to customize the list of available  
listening modes that can be applied to incoming signals. Each Mode Family has a subset of available listening modes that can be turned off. If the  
listening mode is set to OFF, then the applicable listening modes in that family are not available for selection from the mode buttons. If the listening  
mode is ON, then the applicable listening modes in that family are available for selection.  
These are not input-specific settings; if a Mode Family option is turned off, it is removed from the list of available listening modes for ALL inputs, and  
regardless of the incoming data stream. Some modes, such as Dolby Digital, DTS, and the Stereo modes in the PCM menus, cannot be excluded  
from the mode selections.  
Note: The Logic 7 Default parameter is the one exception in the Surround Configuration menu - this parameter has different functionality, as described on the  
following page.  
MAIN MENU  
SETUP  
SURROUND CONFIG  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
LOGIC 7 DEFAULT: ON  
DOLBY MULTI-CHANNEL  
DOLBY 2.0  
DOLBY MULTI-CHANNEL  
DOLBY 2.0  
DOLBY VIRTUAL: OFF  
LOGIC 7: ON  
STEREO DOWN MIX: ON  
DTS  
DTS  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DOLBY VIRTUAL: OFF  
LOGIC 7: ON  
PCM 44.1/48 kHz  
PCM 96kHz  
DTS 96/24: ON  
DTS NEO:6: ON  
DTS-ES MATRIX: ON  
DTS-ES DISCRETE: ON  
LOGIC 7: ON  
POWER ON SETTINGS  
STEREO DOWN MIX: ON  
PCM 44.1/48 kHz  
PCM 96kHz  
LOGIC 7: ON  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DOLBY VIRTUAL: OFF  
DTS NEO:6: ON  
HALL: ON  
LOGIC 7: ON  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DTS NEO:6: ON  
5/7 CH STEREO: ON  
5/7 CH STEREO: ON  
3-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
RV-5  
Setup  
LOGIC 7 DEFAULT  
OFF, ON  
LOGIC 7 DEFAULT  
SETUP  
SURROUND CONFIG  
Allows the user to choose Logic 7 as the default surround mode for  
all incoming audio signals. If this parameter is OFF, then the RV-5  
selects the native format of the incoming signal as the default  
listening mode. If set to ON, then all incoming audio signals are  
defaulted to the Logic 7 listening modes.  
Setting the Logic 7 Default to ON does not prevent other listening  
modes from being available through the Mode buttons. Selecting  
the DOLBY, DTS, DSP, or STER soft button on the remote control  
switches the Mode menu selections to any listening modes available  
for those families.  
Note: The Logic 7 Default is the only menu item in the Surround Config  
menu that has different functionality.  
3-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup  
Lexicon  
DOLBY CONFIGURATION  
Selecting the SETUP menu DOLBY CONFIG option opens the Dolby Configuration menu, which is used to configure the Dolby surround modes for  
optimum performance.  
DIMENSION  
R-1, R-2, R-3, O, F-1, F-2, F-3  
DIMENSION  
SETUP  
DOLBY CONFIG  
MAIN MENU  
SETUP  
DOLBY CONFIGURATION  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
MODE: DOLBY PLII MUSIC  
CENTER WIDTH:3  
DIMENSION: 0  
PANORAMA: OFF  
NIGHT: OFF  
Alters the perceived depth of the surround field by creating a  
shallower presentation (F-1 to F-3) that appears to move the center  
of the sound field towards the front of the room or a deeper  
presentation (R-1 to R-3) that appears to move the sound field  
towards the rear of the room.  
POWER ON SETTINGS  
PANORAMA  
OFF, ON  
SETUP  
PANORAMA  
DOLBY CONFIG  
Note: The Dolby Configuration only applies to the Dolby PLII Music and  
Dolby PLIIx Music listening modes. The Dolby Pro Logic IIx mode requires  
a 7.1-channel configured system.  
Appears to increase the sound presentation along the sides of the  
room by extending the stereo image to include surround channel  
signals, which enhances the sense of surround sound by creating a  
“wraparound” effect with side wall imaging.  
MODE  
PLII, PLIIx  
MODE  
SETUP  
DOLBY CONFIG  
Selects the MODE parameter, which chooses between the Dolby PLII  
Music and Dolby PLIIx Music listening modes.  
NIGHT  
SETUP  
OFF, MID, MAX  
NIGHT  
DOLBY CONFIG  
CENTER WIDTH  
0 TO 7  
Adjusts the audio settings for Night mode. The Night mode uses  
special processing to preserve the dynamic range and full intelligibility  
of a movie soundtrack while reducing the peak level. This prevents  
abruptly loud transitions from disturbing others, without reducing the  
sonic impact of a digital source. Use the MID setting for mild  
compression and the MAX setting for more severe compression.  
CENTER WIDTH  
SETUP  
DOLBY CONFIG  
Adjusts the balance of the vocal information in the front soundstage  
between the center and front left/right speakers. The higher settings  
spread the center channel sound more broadly into the left and right  
channels while a lower number produces a tigher center channel  
presentation. The Center Width range is 0 to 7 in single increments.  
3-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
RV-5  
Setup  
MUTE LEVELS  
POWER ON SETTINGS  
Selecting the SETUP menu MUTE LEVELS option opens the Mute  
Levels menu, which is used to adjust the mute levels of both the Main  
Zone and Zone 2 audio outputs.  
Selecting the SETUP menu POWER ON SETTINGS option opens the  
Power On Settings menu, which provides user preferences to the  
Power On Volume and Dock Auto Power settings.  
MAIN MENU  
SETUP  
POWER ON SETTINGS  
POWER ON VOL: -30dB  
DOCK AUTO POWER: ON  
MAIN MENU  
SETUP  
MUTE LEVELS  
MAIN ZONE: -30dB  
ZONE-2: -30dB  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
POWER ON SETTINGS  
POWER ON SETTINGS  
POWER ON VOL  
LAST, -80dB TO -10dB  
MAIN ZONE  
FULL, -10, -20, -30, -40dB  
POWER ON VOL  
SETUP  
POWER ON SETTINGS  
MAIN ZONE  
SETUP  
MUTE LEVELS  
Identifies the starting volume level when the RV-5 is powered on.  
The Last parameter sets the volume to the same volume that existed  
when the unit was put into Standby or powered off from the rear  
panel switch. The Power On Volume can be set from –80dB to –10dB  
in 1dB increments.  
Allows you to choose different levels of attenuation for Main Zone  
audio muting. The FULL setting completely mutes the box. The  
other available settings perform incremental muting.  
ZONE 2  
SETUP  
FULL, -10, -20, -30, -40dB  
DOCK AUTO POWER  
OFF, ON  
ZONE-2  
MUTE LEVELS  
DOCK AUTO POWER  
SETUP  
POWER ON SETTINGS  
Allows you to choose different levels of attenuation for Zone 2 audio  
muting. The FULL setting completely mutes the box. The other  
available settings perform incremental muting.  
If the Dock Auto Power parameter is set to ON, then if an iPod is  
playing when plugged into the Dock, it will take the RV-5 out of  
Standby mode and select the Dock input. If the Dock Auto Power  
parameter is set to OFF, then the RV-5 does not respond when a  
running iPod is plugged into the Dock. For more information about  
the Dock input, refer to Section 5: Tuner, PC, & Dock Controls.  
Note: If the Main Zone is OFF when the RV-5 is put into Standby, when  
the iPod is plugged into the Dock, the RV-5 will power up but the Main  
Zone will remain OFF. The user will need to manually select the DOCK  
input at that point.  
3-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Setup  
Lexicon  
3-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Audio Controls & Video Status  
Audio Controls............................................................................4-2  
Video Status............................................................................... 4-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio Controls & Video Status  
Lexicon  
AUDIO CONTROLS  
Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the AUTOCAL settings, except for the  
Audio Status parameter.  
MAIN MENU  
AUDIO CONTROLS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
AUTO EQ: ON  
EQ PRESET  
EQ ADJUST  
TONE CONTROLS: OFF  
BASS: 0dB  
TREBLE: 0dB  
AUDIO STATUS  
EQ PRESET  
EQ ADJUST  
HF SHELF: 0dB  
ACTIVE PS: USER  
PRESET 1: FACTORY  
PRESET 2: FACTORY  
PRESET 3: FACTORY  
AUDIO STATUS  
INPUT: HD+  
NAME:  
CONNECTOR: ANALOG 3  
AUDIO: - - -  
MODE FAMILY: LOGIC 7  
MODE: MUSIC 5.1  
location that is currently active if the AUTO EQ parameter is set to  
ON for any input. The Active Preset can be set to any of the three  
saved preset locations.  
AUTO EQ  
AUDIO CONTROLS  
OFF, ON  
AUTO EQ: ON  
If the AUTOCAL process is performed and the settings are saved,  
then the Auto EQ parameter identifies if the saved AUTOCAL  
settings are being actively applied to the system. When the Auto EQ  
parameter is OFF, the AUTOCAL settings are not applied.  
The Preset locations cannot be selected and are present only to  
identify the current state of each location. If the location indicates  
“SET” then the preset location has AUTOCAL settings saved to it. If  
the location indicates “FACTORY”, then the preset location has not  
been used and remains at the default factory settings.  
Note: When the AUTO EQ parameter is OFF, the EQ ADJUST parameter is  
also not applied.  
Note: If all three Preset locations indicate “FACTORY”, then the AUTOCAL  
procedure has not yet been done, or at the least, the settings have not been  
saved.  
EQ PRESET  
PRESET 1, PRESET 2, PRESET 3, USER  
EQ PRESET  
AUDIO CONTROLS  
For more information on the AUTOCAL process, refer to Section 3:  
Setup.  
Identifies the three preset locations where the AUTOCAL settings  
are saved, and displays the state of each preset (saved or unused).  
The Active PS, or Active Preset, parameter identifies the preset  
4-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Audio Controls & Video Status  
To load a different saved EQ Preset into the system:  
Note: When the Tone Controls are OFF, the incoming audio datastream is  
stereo analog, and the Mode Family is set to STEREO, four different listening  
modes are available: 7CH STEREO, 5CH STEREO, 2CH STEREO, and 2CH  
BYPASS. Refer to the “Listening Modes” section of Section 3: Setup for more  
information.  
1. Decide which saved Preset location you want to load.  
2. Select ACTIVE PS from the EQ PRESET menu.  
3. Use the or cursors to select the Preset location you want  
to load.  
BASS  
AUDIO CONTROLS  
+6dB to -6dB  
4. Press the cursor to save the selection.  
BASS  
When the Active PS is set to “USER”, this indicates a factory default  
condition.  
Controls the amount of low-frequency boost or cut applied to all of  
the audio outputs. Bass is an independent setting for each input,  
NOT a global setting. The BASS parameter can be adjusted from  
+6dB to -6dB in 1dB increments.  
Note: Once a Preset location has been selected and saved, the factory  
default “USER” option is no longer available for selection. Before a preset  
location is saved, toggling the EQ on & off results in a noticeable change in  
the subwoofer output level. This is normal behavior.  
TREBLE  
+6dB to -6dB  
TREBLE  
AUDIO CONTROLS  
Controls the amount of high-frequency boost or cut applied to all  
of the audio outputs except for the subwoofers. Treble is an  
independent setting for each input, NOT a global setting. The  
TREBLE parameter can be adjusted from +6dB to -6dB in 1dB  
increments.  
HF SHELF  
AUDIO CONTROLS  
+8dB to -8dB  
EQ ADJUST  
HF SHELF  
Located in the EQ ADJUST menu, the HF SHELF control acts as a  
high-frequency shelf filter, which boosts or cuts frequencies above  
1kHz. The HF SHELF parameter can be adjusted from +8dB to -8dB  
in 1dB increments.  
Note: The HF SHELF parameter does not adjust the timbre of the rear  
speakers in the 7-CHANNEL listening mode.  
TONE CONTROLS  
OFF, ON  
TONE CONTROLS: OFF  
AUDIO CONTROLS  
Activates or deactivates the Bass and Treble Tone Controls. Bass and  
Treble controls are only active when the Tone Control parameter is  
set to ON.  
4-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Audio Controls & Video Status  
Lexicon  
INPUT RESOL identifies the current input resolution setting.  
AUDIO STATUS  
COPY PROTECTION identifies the current status of copy  
protection.  
AUDIO CONTROLS  
AUDIO STATUS  
INPUT: HD+  
NAME:  
CONNECTOR: ANALOG 3  
AUDIO: - - -  
MODE FAMILY: LOGIC 7  
MODE: MUSIC 5.1  
V-PROCESS identifies the current setting of the video processor.  
OUTPUT RESOL identifies the current output resolution setting  
of the HDMI and component outputs.  
Note: The HDMI and component output resolution values are always  
the same, unless copy protection is active. In some cases, copy  
protected inputs can restrict the component output format options.  
The AUDIO STATUS menu is an information-only menu identifying  
the current audio status of the RV-5.  
COMPONENT OUT identifies the currently selected  
component output status as described below.  
INPUT identifies the currently selected input.  
S-VIDEO OUT identifies the currently selected S-video output  
status as described below.  
NAME identifies the customer-chosen name, if any, for the  
currently selected input.  
COMPOSITE OUT identifies the currently selected composite  
output status as described below.  
CONNECTOR identifies the current audio connector in use.  
AUDIO identifies what type of audio signal is in use.  
MODE FAMILY identifies the currently selected mode family.  
MODE identifies the currently selected listening mode.  
The Component, S-Video, and Composite Out parameters all reflect  
the interaction between the input type (which is not listed in the  
Video Status menu), the copy protection status, the video process  
parameter setting, and the current output resolution.  
Note: The Audio line is dashed out if the audio input is analog.  
Therefore...  
VIDEO STATUS  
COMPONENT OUT displays “OFF” if the component output is  
disabled for the current video input and processing  
configuration. Otherwise, it displays “Enabled”.  
VIDEO STATUS  
VIDEO STATUS  
INPUT RESOL: - - -  
COPY PROTECTION: OFF  
V-PROCESS: FAROUDJA  
OUTPUT RESOL: - - -  
COMPONENT OUT: 480i  
S-VIDEO OUT: OFF  
S-VIDEO OUT displays “OFF’ if the S-video output is disabled  
for the current video input and processing configuration.  
Otherwise, it displays the current output resolution.  
COMPOSITE OUT displays “OFF’ if the composite output is  
disabled for the current video input and processing  
configuration. Otherwise, it displays the current output  
resolution.  
COMPOSITE OUT: OFF  
The VIDEO STATUS menu is an information-only menu identifying  
the current video status of the RV-5.  
4-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5
Tuner, PC, & Dock Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tuner, PC, & Dock Controls  
Lexicon  
Zones. In addition, if one of these inputs is playing in the Main  
Zone, you can freely choose any other Analog input in Zone 2.  
TUNER, PC, AND DOCK OVERVIEW  
Unlike the other nine inputs of the RV-5 Receiver, the Tuner, PC, and  
Dock inputs are NOT interchangeable. These three inputs have  
specific audio-only functionality that is exclusive to these individual  
inputs. The TUNER input is for use with the internal AM/FM radio  
tuner and cannot be used in conjunction with any of the rear panel  
audio inputs. The Tuner controls and features are discussed in the  
following sections of this chapter.  
AM/FM RADIO TUNER  
The AM/FM radio tuner can be operated from the front panel or the  
remote control. Thirty presets can store AM or FM frequencies,  
identified by the preset number, station frequency and band. Two  
antennas are supplied with the RV-5; one for AM and one for FM  
stereo. At a minimum, use of the supplied antennas is  
recommended to ensure consistent tuner performance.  
The PC input is tied to the USB jack on the rear panel and is only for  
use with media software on a computer. The PC controls and  
features are discussed in later sections of this chapter. The Dock  
input is tied to the DOCK connector on the rear panel and is only  
for use with iPod players that are connected to the DOCK input via  
the optional D-1 Dock accessory. The Dock controls and features  
are discussed in later sections of this chapter.  
ZONE 2 TUNER  
There is only one tuner in the RV-5 Receiver, but it can be accessed  
and output to either the Main Zone or the Zone 2 location. As a  
result, the Tuner display doesn’t indicate if the Main Zone or Zone 2  
input is being altered, because only one tuner is being adjusted. If a  
change is made to the Tuner in Zone 2, the same change is  
reflected in the Main Zone.  
While all three of these inputs have devoted touch screen menu  
controls using the remote control, the front panel controls under  
the TUNER heading are multi-functional buttons that operate the  
AM/FM radio tuner and the iPod functions when an iPod is plugged  
into the rear panel Dock input via the D-1 Dock optional accessory.  
TUNER ACTIVATION AND DISPLAY  
Note: The audio input for the Tuner, PC, and Dock inputs are not  
user-adjustable. However the video input for these three inputs can be set to  
any of the available rear panel video inputs and are as fully customizable as  
any of the other nine inputs.  
To activate the Tuner from the front panel, press the TUNER input  
button under the MAIN heading.  
To activate and control the Tuner using the remote control:  
In addition to these Main Zone differences, the Tuner, PC, and  
DOCK inputs also behave differently in Zone 2 operation. Unlike the  
other inputs, the Tuner, PC, and DOCK inputs operate in Zone 2  
independently of both each other and the other nine inputs,  
regardless of what is playing in the Main Zone. Any combination of  
these three inputs may be selected in the Main Zone and Zone 2,  
including the selection of one input playing simultaneously in both  
Touch the TUNER selection on the MAIN touch screen of the  
remote control and then press the +10 button marked  
“TUNER”, or  
From the “LEX” or “TUNER” layers of the touch screen, just  
press the +10 button marked “TUNER”.  
To control the Tuner, the TUNER input must be selected in either  
the Main Zone or Zone 2.  
5-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
RV-5  
Tuner, PC, & Dock Controls  
Note: The Tuner Input setup displays Digital Audio as NONE, Analog Audio  
as TUNER, and the Dig/Anlg Auto parameter is dashed out. These three  
parameters cannot be changed for the Tuner Input.  
AUTO/MAN  
Controls how scrolling through the frequencies is managed. The  
button toggles between Automatic (AUTO) and Manual (MAN)  
tuning. The first press displays the current state, “AUTO” or  
“MANUAL”, and the second press changes the setting.  
Once the Tuner is activated, the TUNER input button under the  
Main Zone heading on the front panel is lit with a blue LED; the  
Zone 2 TUNER input button lights with an amber LED. The front  
panel of the RV-5 and the 2-line OSD display TUNER and the  
current listening mode on the left side of the display; and the  
currently selected band frequency, preset location, and volume on  
the right side.  
AUTO automatically seeks out the next available station when a  
TUNE button is pressed; MANUAL only scrolls when the user presses  
a TUNE button.  
If AUTO is selected, then pressing a TUNE button once will start the  
automatic scrolling. Pressing a TUNE button again stops the  
scrolling process. If MAN is selected, when either the Tune + or  
Tune - button is pressed and held down, the frequencies can be  
scrolled through faster.  
TUNER  
FM 87.50 01  
LOGIC 7 7CH MU -32dB  
TUNER CONTROLS  
TUNE +/-  
The front panel controls, the first page of the Tuner remote touch  
screen menu, and the third page of the Zone 2 remote touch  
screen menu provide identical controls for the AM/FM radio tuner.  
Use the Tune + or Tune - controls to select a frequency. Pressing  
either the Tune + or Tune - button enables the user to scroll through  
the frequencies. The FM band scrolls in 0.1 MHz increments; the  
AM band scrolls in 10 kHz increments. The Auto/Man setting affects  
this function.  
AM/FM  
Selects the frequency band that the tuner will play. This button  
toggles between AM and FM.  
PRESET +/-  
Use the Preset + or Preset - controls to select a previously saved  
radio station. Radio stations saved to a preset are displayed to the  
left of the associated preset number. There are 30 Presets available  
for the Tuner.  
ST/MON  
Toggles between FM Stereo and Monaural reception. The first press  
displays the current state and the second press changes the setting.  
To select the preset location of a previously saved radio station,  
simply scroll through the Presets until you reach the desired Preset  
number. The tuner will automatically switch to play the selected  
preset radio station. Holding one of the buttons down scrolls  
through the preset locations until the button is no longer being  
pressed.  
Note: This button also controls FM muting of weak signals. In Stereo mode,  
very weak signals, or FM static when a signal isn’t present, are muted. In  
Monaural mode, no muting is applied, so very weak signals and FM static  
are audible.  
5-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tuner, PC, & Dock Controls  
Lexicon  
SAVE  
PC CONTROLS  
Stores a radio station into a preset location.  
The RV-5 is capable of direct connection to a computer for audio  
playback. Once connected, playback of audio streams from a  
computer are possible through your RV-5 Receiver, with all the  
power and performance of the high-current amplifier, your own  
speakers, and the enhanced multi-channel playback made possible  
through the use of Logic 7, Dolby Pro Logic II/IIx, or DTS Neo:6  
processing.  
To Save a Radio Station to a Preset Location:  
1. Tune to the station frequency and band that you want to save.  
2. Press SAVE. A blinking preset number or dashed lines are  
displayed.  
Note: If nothing is pressed after the SAVE button, the preset will blink for  
several seconds before the save function is cancelled.  
SETTING UP TO PLAY  
3. Press Preset +/- or Tune +/- to scroll through the presets.  
4. Press SAVE again to save the station into the selected preset.  
The RV-5 Receiver connects to a PC-compatible computer through  
the USB jack on the rear panel. Connect one of the available USB  
jacks on your computer to the USB jack on the RV-5 rear panel using  
a cable with one standard USB connector and one USB “Mini B”  
connector. Only the PC input can be used with computer media  
players.  
If the selected preset already has a station saved to it, the RV-5  
will seek confirmation of the action. The message, “Press again  
to write”, is displayed.  
Note: If no action is taken for five seconds, the RV-5 will time out and  
resume normal operation; the station will not be saved to the preset.  
Note: The PC Input setup displays Digital Audio as USB, Analog Audio as  
NONE, and the Dig/Anlg Auto parameter is dashed out. These three  
parameters cannot be changed for the PC Input.  
The RV-5 may be used with PC-compatible computers running  
®
Microsoft Windows 2000 with Service Pack 4 or higher installed,  
®
®
Vista , Windows XP , or Windows XP Media Center Edition with  
Service Pack 1 or higher installed. In addition, you will need to have  
a media player installed on the computer. The RV-5 has been tested  
®
for operation with Windows Media Player Version 8.0 and above,  
but it is also compatible with many other popular players such as  
®
®
®
iTunes , WinAmp , and Real Player . Always verify that you have  
the latest version of the player installed to ensure the best  
compatibility and performance.  
When the connection between a computer and the RV-5 is made  
for the first time, or if the USB connection is plugged into a different  
5-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Tuner, PC, & Dock Controls  
USB jack on a computer or hub that has not been previously  
connected to the RV-5, you will see a series of pop-up messages  
from Windows to indicate that the computer is configuring itself for  
the new device. Since the RV-5 provides a number of different  
functions, you may see the “Found New Hardware” message up to  
four times, one each for “A/V Receiver,” “Compatible Device,”  
“Audio Receiver”, and “Human Interface Device.”  
The PC|| option mimics the Pause/Play control. If the playlist  
is not active, pressing this option starts the playlist. If the  
playlist is already playing, then pressing this option pauses it.  
The PC- option mimics the Skip Back control. Pressing this  
option causes the media player to skip back a track in the  
playlist.  
The PC+ option mimics the Skip Forward control. Pressing this  
option causes the media player to skip forward a track in the  
playlist.  
CAUTION!  
Do NOT power cycle the computer while connected to the  
RV-5 with the PC input selected. The computer MUST be  
on and connected to the RV-5 rear panel USB jack BEFORE  
selecting the PC input on the RV-5. Selecting the PC input  
first may cause a burst of loud noise that may be  
damaging to the speakers or the listener’s hearing.  
Harman Specialty Group assumes no responsibility for  
damage caused in this manner.  
Once playback is started, the audio from a USB source is treated the  
same as any other two-channel audio source, and you may apply  
any of the appropriate surround processing modes.  
Note: Whenever the USB jack is connected to the computer, the RV-5 will be  
selected as the sound card for the computer, even while the RV-5 is in  
Standby.  
PLAYING PC MEDIA  
Before selecting the PC input on the RV-5, make certain that the  
media player has been opened on the computer and is the  
“top” or active screen. The remote control will not operate the  
media player if it is minimized or “behind” other programs.  
You are now ready to begin playing music. The RV-5 remote control  
or the computer media player program can be used to control the  
play, pause, skip forward, and skip back features of the media  
player.  
Using the RV-5 remote control:  
Page 4 of the “Lex” touch screen menu provides media player  
controls for use with the PC input.  
5-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tuner, PC, & Dock Controls  
Lexicon  
Once the DOCK connector is attached to the D-1 Dock accessory,  
select the DOCK input. The RV-5 front panel 2-line front panel  
display indicates that the input is “UNPLUGGED...”. The status  
remains as “UNPLUGGED” until an iPod is actually docked.  
DOCK FUNCTIONALITY  
The optional D-1 iPod Docking Station allows you to enter a new  
world of listening enjoyment made possible by combining the  
storage capacity and playback flexibility of an iPod® (not included)  
with the sonic power of your RV-5 Receiver. Operation is easy, you  
can use your RV-5 remote control or the front panel buttons to  
access and control your iPod selections. Just one simple connection  
and you’re ready to go!  
Note: The DOCK Input setup displays Digital Audio as NONE, Analog Audio  
as DOCK (or “UNPLUGGED” if there is no iPod connected to the RV-5), and  
the Dig/Anlg Auto parameter is dashed out. These three parameters cannot  
be changed for the DOCK Input.  
When the iPod is initially plugged into the RV-5, the iPod goes to  
the top of its music menu. When the iPod is removed, the iPod  
menu goes to the root menu.  
Note: This functionality is ONLY available if you have purchased the optional  
D-1 iPod Docking Station. Refer to Section 1: Getting Started for ordering  
details.  
If the RV-5 is in Standby mode with the DOCK AUTO POWER  
parameter set to ON and the iPod currently playing a track when it  
is plugged into the Dock, the track will continue to play and the  
2-line front panel display will show the current track information.  
CONNECTING THE DOCK TO THE RV-5  
Before connecting the Dock, turn the RV-5 off using either the main  
power switch or the Standby button.  
With the RV-5 off, press the button on each side of the connector at  
the end of the Dock cable and insert this plug into the DOCK  
connector on the rear panel of the RV-5. The connector is keyed to  
only connect in one way. If you inadvertently try to plug the  
connector in the wrong way, do not force it. Simply invert the  
connector and try again.  
SELECTING THE CORRECT iPOD INSERT  
Each iPod model is a slightly different size, making it necessary to  
use an insert that matches your specific iPod to the Dock. The Dock  
is shipped with the insert for the color screen and photo models  
already installed; if you own one of those models, no further  
changes are necessary.  
If you own a different iPod, first select the insert that matches your  
model. The model identification is printed on the back of each of  
the four extra inserts supplied with the Dock.  
Note: The iPod Shuffle is not supported by the optional D-1 iPod Docking  
Station.  
Press buttons when inserting or removing the plug.  
5-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
RV-5  
Tuner, PC, & Dock Controls  
To remove the factory installed  
insert, hold the Dock with one  
hand as you grab the edges of  
the insert in the Dock with  
your other hand, then pull  
straight up. Use the following  
as a guide to determine which  
insert is correct for your iPod model:  
DOCKING THE iPOD  
After placing the appropriate insert in the  
center well of the Dock and connecting  
the Dock to your receiver, dock your iPod  
by placing it into the insert, gently  
pressing it down until the connectors  
mate between the iPod and the Dock.  
Note: If you normally keep your iPod in a  
protective case, or “skin”, you will need to  
remove it before docking your iPod.  
For any iPod with a color screen, including all iPod photo  
models, use the insert with “COLOR/PHOTO” on the back.  
This insert is already installed in the Dock at the factory.  
When the iPod is plugged into the Dock, the iPod navigation  
controls are no longer accessible and the iPod screen will read  
“Connected and ready to be unplugged“.  
For 20GB or 30GB iPod photo models only, remove the insert  
marked “COLOR/PHOTO” and attach the two included foam  
pads to the rear inside wall in the well of the insert before  
replacing it.  
For iPods with a black & white screen and a 10GB, 15GB, or  
20GB hard drive, use the insert with “10GB/15GB” on the  
back.  
DOCK 2-LINE DISPLAY CHARACTERISTICS  
When the DOCK input is selected, the 2-line front panel display  
changes so that the left side of the display reflects the current iPod  
information. Initially, the 2-line display on the RV-5 displays “Menu”  
on the left side of the top line. “Playlists” and the number of  
playlists available are displayed on the left side of the bottom line.  
The ANLG signal type is identified on the top right side and the  
current volume setting of the RV-5 is identified on the bottom right  
side of the display, as shown:  
For iPods with a black & white screen and a 30GB or 40GB  
hard drive, use the insert with “30GB/40GB” on the back.  
Use the insert with “mini” on the back for all iPod mini models.  
Use the insert with “Universal” on the back for iPod models  
that come with a special insert.  
Once you have selected the correct insert, place it over the well in  
the center of the Dock and gently press it down so that it snaps into  
place.  
MENU  
ANLG  
-39dB  
PLAYLISTS 11  
Note: Do not place an iPod in the Dock unless an insert is installed;  
otherwise the iPod will not connect properly and damage may occur to the  
Dock and/or your iPod that is not covered by the warranty for either  
product.  
Note: The name of the iPod is always included as the first playlist.  
5-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Tuner, PC, & Dock Controls  
Lexicon  
As the menus on the iPod are scrolled through, the top left side  
indicates the menu item selected and the bottom left side indicates  
the menu items as they are scrolled through, as shown:  
Using the RV-5 remote control:  
Page 3 of the “Lex” touch screen menu provides iPod controls  
for use with the DOCK input.  
PLAYLIST 4  
ANLG  
-39dB  
The IPOD- option mimics the Skip Back control. Pressing this  
option causes the iPod to skip back a track in the playlist.  
DINNER MIX  
The IPOD+ option mimics the Skip Forward control. Pressing  
this option causes the iPod to skip forward a track in the  
playlist.  
Note: The allotted space for iPod navigation descriptions is 14 characters. If  
a menu item is longer than this limitation, the displayed name is simply cut  
off at the 14-character point.  
The CLIKoption mimics a counter-clockwise click on the  
iPod.  
When a song is playing, the bottom of the 2-line display identifies  
the track counter, the time left on the song, and whether the song  
is in PLAY or PAUSE mode. The top left side of the display  
continuously scrolls through the song title, artist, and album title, as  
shown:  
The CLIKoption mimics a clockwise click on the iPod.  
The MENU option mimics the MENU button on the iPod. The  
Menu button backs out of the menu structure, one level at a  
time, each time it is pressed.  
The SEL option mimics the SELECT button on the iPod. The  
SELECT button acts as a play button at the song level. The  
select button drills deeper into the menu structure, one level a  
time, each time it’s pressed.  
Title: Everybod...  
ANLG  
-32dB  
0:57 -2:08  
The|| options mimic the Pause/Play control of the iPod. If the  
playlist is not active, pressing either of these options will start  
the playlist. If the playlist is already playing, then pressing this  
option will pause it.  
CONTROLLING THE iPOD WITH THE RV-5  
There are two ways to control the iPod once it is docked and  
connected to the RV-5. The Lexicon RV-5 remote control has a  
touch screen menu, page 3 of the “LEX” menu layer, devoted to  
controlling the iPod. In addition, the Tuner section of the RV-5 front  
panel is a multi-functional panel that also controls the iPod. The  
remote control menu buttons and the front panel tuner buttons  
provide identical controls.  
Using the Front Panel Tuner Controls:  
PRESET- and PRESET+ mimic the and the buttons on the  
iPod, which Skip Back and Skip Forward. Pressing these buttons  
causes the iPod to skip back or skip forward one track in the  
playlist.  
Note: The following functionality is available only if there is a valid device  
connected to the DOCK connector on the rear panel and the DOCK input  
has been selected.  
TUNE- and TUNE+ mimic a counter-clockwise or clockwise click  
on the iPod.  
5-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Tuner, PC, & Dock Controls  
AUTO/MAN mimics the MENU button on the iPod. The MENU  
button backs out of the menu structure, one level at a time,  
each time it is pressed.  
To control the iPod in Zone 2 via the remote control:  
1. From the “Zone 2” menu layer, select the DOCK input  
(number pad key 8).  
SAVE mimics the SELECT button on the iPod. The SELECT  
button acts as a play button at the song level. The select  
button drills deeper into the menu structure, one level at a  
time, each time it’s pressed.  
2. Page 1 of the “Zone 2” menu layer touch screen provides the  
iPod controls.  
ST/MON and FM/AM both mimic the Play/Pause (|| ) control  
of the iPod. If the playlist is not active, pressing this option  
starts the playlist. If the playlist is already playing, then pressing  
this option pauses it.  
To control the iPod in Zone 2 via the front panel Tuner:  
1. Select the DOCK input in the Main Zone.  
2. Activate the Main Zone OFF button so that the LED lights red.  
The Main Zone is now off.  
CHARGING THE iPOD  
Note: Do NOT change the Main Zone input before pressing the OFF  
button. The Main Zone MUST be turned off with the DOCK input  
selected.  
You may leave your iPod in the Dock even when you are not using  
it as a playback source. Whenever the iPod is docked and the RV-5  
is turned on, the Dock will charge the battery in the iPod.  
3. Select the DOCK input in Zone 2.  
4. The front panel buttons under the TUNER heading now control  
the iPod in Zone 2.  
REMOVING THE iPOD  
To remove the iPod from the Dock, grasp the sides of the iPod and  
pull it straight up, away from the Dock.  
ZONE 2 iPOD CONTROLS  
The RV-5 Receiver allows the DOCK input, and attached iPod, to be  
accessed and output to either the Main Zone or the Zone 2  
location. However, for the DOCK inputs, the OSD and front panel  
display reflect ONLY the Main Zone activity. Therefore, if the iPod is  
accessed in Zone 2, there is no visible indication on the RV-5 that a  
change has been made.  
5-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Tuner, PC, & Dock Controls  
Lexicon  
5-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Troubleshooting & Maintenance  
Troubleshooting......................................................................... 6-2  
RV-5 Error Messages................................................................... 6-7  
Video Error Messages ................................................................................ 6-7  
Autocal Error Messages ............................................................................. 6-8  
Video Resolutions Table............................................................ 6-10  
Routine Maintenance ............................................................... 6-12  
Restoring Factory Default Settings............................................ 6-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting & Maintenance  
Lexicon  
The RV-5 is powered on, but there is no audio.  
TROUBLESHOOTING  
1. Make sure that the source device is powered on, playing audio,  
and set to the right output connector.  
The RV-5 does not power on.  
1. Make sure the rear panel power switch is set to the ON  
position.  
2. Make sure the volume level is audible. Volume level can be  
adjusted with the front panel volume knob or the remote  
control VOL and buttons.  
2. Attempt to power on the RV-5 with the front panel Standby  
button and remote control ON button.  
3. Make sure the audio has not been muted. The message “MUTE  
ON” is displayed on the on-screen and front panel displays  
when audio has been muted in the Main Zone. In addition, the  
MUTE button on the front panel lights red when the Main Zone  
mute is active and green when the Zone 2 mute is active. If  
both Zones are muted, the Mute button lights amber. To  
deactivate mute, press the MUTE button or adjust the volume  
level.  
3. Examine the power cord to ensure a good connection between  
the rear panel AC input connector and the wall outlet.  
4. Check the electrical circuit and breaker.  
The remote control does not work.  
1. Make sure that the remote control touch screen is in the “LEX”,  
“Zone 2”, or “Tuner” menu layers. The remote control is a  
universal control designed to operate all of the home theater  
equipment in your system. In order to control the RV-5, the  
remote control must be in the “LEX”, “Zone 2”, or “Tuner”  
menu layers.  
4. Verify that all rear panel input and output connections are  
correct.  
5. Check the INPUT SETUP menu DIG AUDIO and ANLG AUDIO  
parameters to ensure the appropriate audio connector is assigned  
to the selected input.  
2. Eliminate obstructions between the remote control and the  
front panel IR receiver. When the rear panel IR IN connector is  
not in use, the remote control must be in line of sight with the  
front panel IR receiver for proper operation. The remote control  
might also become unreliable if strong sunlight or fluorescent  
light is shining on the RV-5’s IR receiver.  
6. Verify that the incoming audio signal is compatible with the input  
chosen.  
Note: The rear panel input connectors marked S/PDIF INPUTS (RCA  
& TOSLINK connectors) are not compatible with MP3 sources.  
The Subwoofer(s) distorts frequently.  
3. Make sure the remote control batteries are correctly inserted  
with the proper polarity.  
The likely cause for the subwoofer(s) to distort is either an  
incorrectly set output level or the subwoofer high-pass filter is set  
too low. Verify that the SUB/LFE LPF setting (subwoofer cross-over  
point) is set correctly. If correct, try setting the SUB HPF setting to a  
higher value to resolve the issue. Refer to Section 3: Setup for more  
information.  
4. Replace the remote control batteries. When the batteries are  
low on power, the remote control enters a low-voltage  
condition that prevents it from operating the RV-5.  
5. If using the optional RF-1 Receiver, ensure that it is properly  
connected to the RV-5 rear panel.  
6-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Troubleshooting & Maintenance  
A humming sound is present in the audio.  
In the SEMI AUTOCAL Test, the Far Field Test keeps failing.  
1. If a cable TV connection is present, disconnect the cable from  
the wall outlet. If this eliminates the humming sound, a ground  
loop isolation device is required. Contact your dealer or cable  
provider for assistance.  
1. Ensure that the microphone is placed in your preferred seating  
location.  
2. Ensure that the volume is set to -20dB.  
3. In the Speakers Menu, ensure that none of the speakers  
connected to the system have a cross-over selection of NONE.  
2. Disconnect components one at a time to isolate the problem.  
Once the problem is identified, make sure the associated  
component is properly grounded and connected to the same  
electrical circuit as the RV-5 Receiver.  
During the Far Field Test, test tones are sent to ALL speaker  
locations, regardless of the settings identified in the Speakers  
menu. Therefore, every speaker that is plugged in MUST have  
a cross-over setting other than NONE for the Far Field test to be  
successul. If a cross-over is set to NONE but the speaker is  
plugged in, the test will fail because it will “see” a speaker that  
is identified as having no cross-over point.  
RF interference is present in the audio or video.  
1. Make sure the RV-5 is not positioned too close to RF-emitting  
devices.  
4. Refer to the “AUTOCAL Error Messages” section found later in  
this chapter for more information about specific error messages  
related to the AUTOCAL process.  
2. Move such items one at a time to isolate which device is  
causing the problem.  
3. Replace unshielded cables with shielded cables wherever  
possible.  
The volume won’t go to the +10 dB maximum level.  
Audio sounds distorted when using analog audio inputs.  
The speaker output level settings may affect the maximum volume  
level of the RV-5 Receiver. The maximum volume level is +10 dB  
minus the maximum output level setting of any speaker. Thus, if  
your front L/R output levels are set to +3 dB, the maxium allowable  
volume level is +10 dB minus 3 dB, or +7 dB.  
The likely cause for distorted audio while using the analog audio  
inputs is that the input voltage is too high. The RV-5 analog inputs  
have a maximum rating of 2 Vrms. Any input voltages higher than  
this limit will exhibit audible distortion.  
To correct the problem, reduce the analog audio output from the  
connected device using the volume or level control. If neither is  
available, an intermediate device may be required. Contact your  
Lexicon dealer for assistance.  
The picture on the video monitor is all red.  
This is a synchonization problem when using HDMI. When the  
source device and video monitor do not sync correctly, the  
color spacing may not load correctly. When the monitor color  
is all red, or all green, it means that only half of the color  
spacing data was loaded into the video monitor.  
To correct the problem, simply enter the OSD menu and then exit  
out again. This will resync the video and should clear the error.  
6-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting & Maintenance  
Lexicon  
The RV-5 is powered on, but there is no video.  
2. Use the or cursors to highlight SETUP and then press the  
cursor, or press the SELECT button, to select the menu  
option.  
1. Examine the video cables – particularly the S-Video cables –  
to ensure a good connection to the associated component.  
3. Using the cursors, highlight and select DISPLAY SETUP.  
2. Check the INPUT SETUP menu VIDEO IN parameter to ensure  
the appropriate video connector is assigned to the selected  
input.  
4. Then select CONNECTION. The parameter selection starts to  
flash.  
5. Use the or cursors to select ANALOG and then press the  
3. Set the V-PROCESS parameter to BYPASS. This setting doesn’t  
apply any video processing and outputs the signal in the same  
resolution and format as the incoming signal.  
cursor to save the selection.  
6. Press EXIT to close the OSD menu.  
4. Refer to the “Video Error Messages” section found later in this  
chapter for more information about specific video-related error  
messages.  
The RV-5 is exhibiting erratic behavior.  
1. Change to a different input, then return to the original input.  
This may clear the discrepency.  
5. Verify that the selected output is not analog with a HDCP  
(High-Bandwidth Digital Content Protection) input source.  
Source material that carries HDCP encoding is only available  
through the HDMI output. No video is output on the analog  
output connectors.  
2. Put the RV-5 into Standby mode. Wait 10 seconds. Then take  
the RV-5 out of Standby mode.  
3. Set the rear panel power switch of the RV-5 to the OFF position.  
Wait 10 seconds. Then set the rear panel power switch to the  
ON position.  
6. Verify that the input type selected on the video monitor  
matches the selected output on the RV-5.  
4. With the RV-5’s rear panel power switch set to OFF, power-cycle  
all other devices that are connected to the RV-5, such as DVD &  
CD players, projectors, and monitors. When finished, restore  
power to the RV-5 by setting the rear panel power switch to the  
ON position and then taking the RV-5 out of Standby mode.  
Video is shifted to the left.  
When the RV-5 has both component and HDMI cables connected to a  
video monitor with the Faroudja processing active, the Faroudja  
processing may cause the video to shift to the left when the  
component output is selected, particularly at higher resolution  
settings.  
5. If the steps above do not resolve the behavior, document all  
user-defined settings on the Installation Worksheet that begins  
on page D-2. Then, follow the instructions found later in this  
chapter to restore factory default settings.  
To correct the issue, change the Display CONNECTION parameter  
from HDMI/DVI to ANALOG, or unplug the HDMI cable.  
To change the CONNECTION parameter:  
1. Enter the OSD menu by pressing MENU on the remote control.  
6-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Troubleshooting & Maintenance  
VIDEO IN is set to NONE, but the monitor has a video error, or  
is showing a blue screen.  
issues don’t need a power cycle to re-sync correctly. We suggest  
that you try the following:  
1. Enter the OSD menu and then exit out again. This will resync  
the video.  
When the VIDEO IN parameter is set to NONE, the RV-5 outputs a  
blue screen at 480i resolution. This blue screen cannot be disabled.  
If the monitor does not support 480i resolution, the monitor may  
display an error message.  
2. Put the RV-5 into Standby mode. Wait 10 seconds. Then take  
the RV-5 out of Standby mode.  
Note: This condition can also exist when the VIDEO IN parameter  
has been setup, but there is no active incoming signal.  
3. Power cycle the RV-5 by turning off the rear panel power  
switch, wait at least 10 seconds, and then turn the rear panel  
power switch to the ON position.  
The 2-line OSD display does not appear on the video monitor.  
4. With the RV-5’s rear panel power switch set to OFF, power-cycle  
all other devices that are connected to the RV-5, such as DVD &  
CD players, projectors, and monitors. When finished, restore  
power to the RV-5 by setting the rear panel power switch to the  
ON position and then taking the RV-5 out of Standby mode.  
Verify that the 2-line OSD parameter under the Setup -> Display  
Setup -> On-Screen Display menu is not set to OFF.  
Verify the video input source. The 2-line OSD is supported only  
at 480i and 576i resolutions when the incoming video source is  
digital.  
The RV-5 is connected via USB to the PC but the computer is  
playing with the sound card, not the RV-5.  
While using HDMI connections, the video monitor is behaving  
oddly.  
This condition may exist if the media player was already active  
when the USB cable was connected between the computer and the  
RV-5 Receiver. With the media player actively playing, it may not  
“see” the USB connection. Close the media player, check the cable  
connections, and then launch the media player again. Now it  
should see the USB connection and switch control to the RV-5.  
Connecting together all the components of your home theater  
system with HDMI depends upon every piece of equipment  
functioning in synchronization. If the timing of any one piece is out  
of sync, then odd results can occur. For example, an out-of-sync  
source might cause incorrect colors to appear on the screen, or to  
shift all of the video to the left or towards the top of the screen. If  
the video monitor sync is off, it might load the color spacing  
incorrectly so that the screen appears to be all one color, instead of  
displaying normal color. In short, an out-of-sync signal can cause a  
number of very odd results.  
To correct the problem, the system needs to resync, which should  
clear the error. Some out-of-sync issues are easier to clear than  
others. Typically, power cycling the RV-5 will clear it, but some sync  
6-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting & Maintenance  
Lexicon  
Using the PC input, the remote control commands on page 4 of  
the LEX menu, page 3 of the TUNER menu, and page 2 of the  
ZONE 2 menu do not work.  
The iPod’s front panel display and controls do not operate  
when the iPod is docked and the DOCK input is selected as the  
RV-5’s active input.  
1. Make sure that the computer is properly connected to the USB  
input of the RV-5 Receiver.  
This is normal behavior and does not indicate a problem with the  
iPod, the Dock, or the RV-5 Receiver. Use the RV-5 remote control  
or front panel TUNER buttons to navigate the iPod functions. Refer  
to Section 5: Tuner, PC, & Dock Controls, for further information.  
2. Make sure that PC is selected as the active input on the RV-5  
Receiver.  
3. Make sure that the media player has been opened on the  
computer and is playing audio.  
The iPod does not seem to be functioning correctly.  
4. Make sure the media player is the “top” or active screen on the  
computer. The RV-5 remote control will not operate the media  
player if it is minimized or “behind” other programs.  
Verify the video input setting of the Dock input in use. If the video  
input is set to an HDMI input source, the functionality of the iPod  
may be hindered.  
CAUTION!  
If all else fails...  
Do NOT power cycle the computer while connected to the  
RV-5 with the PC input selected. The computer MUST be  
on and connected to the RV-5 rear panel USB jack BEFORE  
selecting the PC input on the RV-5. Selecting the PC input  
first may cause a burst of loud noise that may be damag-  
ing to the speakers or the listener’s hearing. Harman  
Specialty Group assumes no responsibility for damage  
caused in this manner.  
1. Document all user-defined settings on the Installation  
Worksheet that begins on page D-2. Then, refer to the  
“Restoring Factory Default Settings” section found later in this  
chapter to reset the RV-5 to the factory settings.  
Note: If you want to save your settings before restoring the  
factory defaults, you must save them manually. The Instal-  
lation Worksheet in Appendix D has been provided to assist  
you.  
The iPod does not play or respond to commands from the RV-5  
remote control.  
2. Contact an authorized Lexicon dealer.  
3. Contact Lexicon customer service at www.lexicon.com or  
781-280-0300.  
1. Make sure that the Dock is properly connected to the RV-5  
Receiver.  
Note: Visit the knowledgebase at http://www.lexicon.com/kbase for  
answers to frequently asked questions and additional troubleshooting  
information.  
2. Make sure that the Dock is selected as the active input on the  
RV-5 Receiver.  
3. Make sure that the touch screen of the RV-5 remote control is in  
an iPod control page of the “LEX”, “TUNER”, or “ZONE 2”  
menu layer.  
6-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Troubleshooting & Maintenance  
VIDEO FORMAT OUTPUT  
ERROR  
RV-5 ERROR MESSAGES  
VIDEO OUTPUT NOTICE  
RV-5 error messages are displayed on the OSD when certain error  
conditions exist. This section explains the meaning of these error  
messages and how to fix each problem.  
Video output resolution  
not supported by HDMI  
monitor. Please select  
a different VIDEO OUT  
resolution.  
This error message will display  
when the RV-5 is connected to an  
HDMI video monitor but the  
VIDEO OUT parameter is set to a  
resolution that is not supported by  
the HDMI video monitor.  
VIDEO ERROR MESSAGES  
The following error messages apply specifically to video issues.  
PRESS > TO CONTINUE  
To correct the problem, right click  
to return to the VIDEO OUT Setup  
parameter and change the VIDEO  
OUT parameter to AUTO or to a  
resolution setting that is supported  
by the video monitor.  
VIDEO PROCESS ERROR  
VIDEO PROCESS NOTICE  
This error message will display  
when the incoming datastream is  
at a higher resolution than the  
resolution of the VIDEO OUT  
parameter. The RV-5 can  
up-sample a lower resolution to a  
higher resolution. However it can  
not down-sample to a lower  
resolution setting.  
Video input resolution  
can not be higher than  
video output resolution  
when set to FAROUDJA.  
Please adjust settings.  
HDCP VIDEO ERROR  
PRESS > TO CONTINUE  
HDCP NOTICE  
This error message will display  
when the video monitor is not  
HDCP compliant and the  
incoming datastream requires  
HDCP compliance. Typically, any  
HDMI source will require a HDCP  
compliant video monitor.  
To correct the problem, right click to return to the VIDEO OUT  
Setup parameter and change the VIDEO OUT parameter to AUTO  
or to a resolution setting that is higher than that of the incoming  
datastream.  
Display is not  
HDCP Capable  
To correct the problem, change  
the incoming datastream to a  
non-HDCP source or change the  
video monitor to one that is HDCP  
compliant.  
6-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting & Maintenance  
Lexicon  
CHANGE MONITOR  
MESSAGE  
FAR FIELD ERROR  
FAR FIELD ERROR  
Speakers detected:  
CHANGE MONITOR TO  
ANALOG IN  
This error message will display  
when the microphone does not  
detect sound from a speaker that  
has a cross-over setting other than  
“NONE” during the Far Field Test.  
FRT-L: NO  
SIDE-R: NO  
This error message flashes on the  
2-line OSD and front panel  
displays when an analog signal is  
being sent to an HDMI monitor.  
CENTER: YES REAR-R: YES  
FRT-R: YES  
REAR-L: YES  
SIDE-L: YES  
Verify mic position  
To correct the problem, check the  
microphone position, verify the  
speaker cables are connected  
properly, verify that the volume  
level is correct, and repeat the test.  
and spkr connections.  
To correct the problem, change the video monitor setting to an  
analog input source.  
If OK, raise volume 5dB.  
REPEAT TEST  
BACK TO SPK/EQ SETUP  
AUTOCAL ERROR MESSAGES  
The following error messages apply specifically to error conditions  
that exist during the AUTOCAL or SEMI AUTOCAL procedures, or  
that pertain to the saved AUTOCAL settings.  
NEAR FIELD ERROR  
NEAR FIELD AUTOCAL  
ERROR  
This error message will display  
when the Near Field test has failed.  
Typically, this failure occurs  
because the microphone is not in  
the proper position or the volume  
setting is too low.  
MICROPHONE OVERLOAD  
ERROR  
MICROPHONE OVERLOAD  
Verify mic position  
and spkr connections.  
If OK, raise volume 5dB.  
Verify microphone  
position and  
lower volume 6dB.  
This error message will display  
when the microphone is placed too  
close to the speaker grille of the  
speaker under test during the Far  
Field, Near Field, or Subwoofer  
Tests.  
REPEAT TEST  
BACK TO SPK/EQ SETUP  
To correct the problem, verify that  
the microphone is within two feet  
of the speaker under test, verify the  
speaker cables are connected  
properly, verify that the volume  
level is correct, and repeat the test.  
REPEAT TEST  
BACK TO SPK/EQ SETUP  
CAUTION!  
If the microphone is too close to the speaker during  
testing, damage to the speaker or microphone may  
result.  
To correct the problem, move the microphone further away from  
the speaker under test and repeat the test.  
6-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Troubleshooting & Maintenance  
SUBWOOFER CAL ERROR  
SUBWOOFER CAL ERROR  
Subwoofers detected:  
This error message will display  
when the Subwoofer test has  
failed. Typically, this failure occurs  
because the microphone is not in  
the proper position or the volume  
setting is too low.  
SUBWOOFER 1: NO  
SUBWOOFER 2: NO  
Verify mic position  
and sub connections.  
If OK, raise volume 5dB.  
To correct the problem, check the  
microphone position, verify the  
subwoofer cables are connected  
properly, verify that the volume  
level is correct, and repeat the test.  
REPEAT TEST  
BACK TO SPK/EQ SETUP  
Note: If you are using a powered subwoofer, verify that it is  
powered on.  
CROSS-OVER CHANGE  
WARNING  
CAUTION  
Changing these  
settings will affect  
the autocalibration.  
This warning message will display  
the first time each speaker or  
subwoofer cross-over is manually  
changed from the AUTOCAL or  
SEMI AUTOCAL settings.  
Run SEMI AUTOCAL  
after changes are made.  
Press the cursor button on the  
remote control to clear the  
warning message. When cross-over  
changes are complete, run the  
SEMI AUTOCAL procedure.  
RETURN TO MENU  
6-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting & Maintenance  
Lexicon  
2. If the incoming analog video signal is Macro-vision protected, a  
VIDEO RESOLUTIONS TABLE  
form of copy protection for analog sources, then the component  
video output must be either 480i or 480p resolution. If the  
output resolution setting has a value that is higher than 480p  
resolution, then no analog signal is output.  
The RV-5 Receiver is designed to allow flexibility in the selection of  
video output resolutions. However, there are restrictions on what  
resolutions can be made available due to incoming signal  
limitations.  
3. If the HDMI is not connected when the incoming signal is a  
Macro-vision protected analog video, then the VIDEO OUT  
parameter changes automatically to 480p resolution and only  
component video is output.  
If you are not getting the expected resolution options for your  
video monitor, it is possible that there is an incompatability  
between the input setup selections and the incoming signal. The  
table below describes those formats that are possible, given a  
specific input source and input setup conditions.  
4. The difference between BYPASS and CONVERSION options is  
where the video encoder is used (CONVERSION) or not  
(BYPASS) when the S-video or composite video input is selected.  
In CONVERSION mode, digital video from the analog input is  
provided to the video encoder and the S-video and composite  
video outputs are encoded. In BYPASS mode, the analog input  
signal goes to the video output directly, with no encoding.  
Notes:  
The following notes refer to the “Note” column in the table.  
1. If the incoming HDMI signal is copy-protected (HDCP), all  
analog video output is blocked. All the available outputs that  
may be affected by copy protection are noted in the table by a  
double asterix (**).  
INPUT  
OUTPUT  
Video Mode  
Source  
Format  
HDMI  
Component  
S-Video  
Composite  
Note  
480i  
480p  
480p ~ 1080i  
480p ~ 1080i  
720p ~ 1080i  
1080i  
480p ~ 1080i**  
480p ~ 1080i**  
720p ~ 1080i**  
1080i**  
480i**  
480i**  
1
-
-
1
HDMI  
720p  
-
-
1
1080i  
480i  
-
-
1
480p ~ 1080i  
480p ~ 1080i  
720p ~ 1080i  
1080i  
480p ~ 1080i  
480p ~ 1080i**  
720p ~ 1080i**  
1080i  
480i  
480i  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3  
FAROUDJA ON  
480p  
-
-
Component  
Analog  
720p  
-
-
1080i  
S-480i  
C-480i  
S&C - 480i  
-
-
480p ~ 1080i  
480p ~ 1080i  
720p ~ 1080i  
480p ~ 1080i**  
480p ~ 1080i**  
720p ~ 1080i  
480i (from S)  
480i (from C)  
480i (from S)  
480i (from S)  
480i (from C)  
480i (from S)  
S-Video,  
Composite  
Analog  
6-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Troubleshooting & Maintenance  
INPUT  
OUTPUT  
S-Video  
Video Mode  
Source  
Format  
HDMI  
Component  
Composite  
Note  
480i  
480p  
480i  
480p  
720p  
1080i  
480i  
480i**  
480p**  
720p**  
1080i**  
480i  
480i**  
480i**  
1
1
-
-
HDMI  
720p  
-
-
1
1080i  
480i  
-
-
1
-
-
2, 3  
2, 3  
2, 3  
2, 3  
2, 3, 4  
2, 3, 4  
2, 3, 4  
1
BYPASS  
480p  
480p  
720p  
1080i  
480i  
480p  
-
-
Component  
Analog  
720p  
720p  
-
-
1080i  
S-480i  
C-480i  
S&C - 480i  
480i  
1080i  
480i**  
480i  
-
-
480i (from S)  
480i (from S)  
S-Video,  
Composite  
Analog  
480i  
-
480i (from C)  
480i  
480i  
480i (from S)  
480i (from S)  
480i  
480i**  
480p**  
720p**  
1080i**  
480i  
480i  
480i  
480p  
480p  
720p  
1080i  
480i  
-
-
1
HDMI  
720p  
-
-
1
1080i  
480i  
-
-
1
480i**  
480i**  
2, 3  
2, 3  
2, 3  
2, 3  
2, 3, 4  
2, 3, 4  
2, 3, 4  
CONVERSION  
480p  
480p  
720p  
1080i  
480i  
480p  
-
-
Component  
Analog  
720p  
720p  
-
-
1080i  
S-480i  
C-480i  
S&C - 480i  
1080i  
480i  
-
-
480i (from S)  
480i (from C)  
480i (from S)  
480i (from S)  
480i (from C)  
480i (from S)  
S-Video,  
Composite  
Analog  
480i  
480i  
480i  
480i  
6-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting & Maintenance  
Lexicon  
ROUTINE MAINTENANCE  
RESTORING FACTORY DEFAULT SETTINGS  
The bulleted items below describe routine maintenance that should  
be performed on a periodic basis.  
It is possible to reset the RV-5 Receiver to its factory settings.  
However, doing so will permanently delete any user-defined or  
manually-entered settings, including parameters such as speaker  
setup changes, input names, and tuner presets.  
Clean the RV-5 exterior surface with a soft, lint-free cloth. Do  
not use alcohol, benzene, acetone-based cleaners or strong  
commercial cleaners. Do not use a cloth made with steel wool  
or metal polish. If the RV-5 is exposed to a dusty environment, a  
low-pressure blower can be used to remove dust from its  
exterior surface.  
Before performing a factory reset, be sure to use the  
worksheets in Appendix D to record all of the input and setup  
information. The factory reset WILL delete all custom settings  
except for the saved EQ Presets.  
Replace the remote control batteries as needed. The remote  
control requires four AAA batteries. When these batteries are  
low on power, the remote control enters a low-voltage  
condition that prevents it from operating the RV-5. Normal  
operation will resume when new batteries are installed.  
To restore the factory default settings:  
1. Record all parameters and user-defined settings on the  
Installation Worksheet that begins on page D-2.  
Note: The Remote Control will not lose any custom settings if the bat-  
teries run out. All custom settings are stored in non-volatile FLASH  
memory.  
2. Put the RV-5 into Standby.  
3. Press and hold the MUTE and ST/MON buttons at the same  
time.  
After several seconds, the RV-5 will turn on. The front panel display  
will state “RESET” and then it will return to the normal display. All  
parameters and user-defined values will now reflect the factory  
default settings, with the exception of any saved EQ Presets.  
Note: If you want to save your settings before restoring the factory  
defaults, you must record them manually. The Installation Worksheet  
in Appendix D has been provided to assist you.  
6-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
A
Appendix  
Specifications............................................................................. A-2  
Declaration of Conformity.......................................................... A-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix A  
Lexicon  
SPECIFICATIONS  
Inputs  
Outputs  
HDMI (Version 1.1)  
Analog Video  
2 HDMI Type A, 19-pin connectors  
HDMI (Version 1.1)  
Analog Video  
One HDMI Type A, 19-pin connector  
• Three component video, RCA connectors  
• Four S-Video connectors  
• Four composite video, RCA connectors  
• One component video, RCA connector  
• One S-Video connector  
• One composite video, RCA connector  
Digital Audio  
Analog Audio  
• Four S/PDIF coaxial (RCA) and four S/PDIF optical  
(Toslink) connectors  
• Coaxial & optical input connectors conform to IEC-958,  
S/PDIF standards  
Analog Audio  
Control  
• 7-channel amplified, binding posts  
• One 8-channel preamplifier plus additional subwoofer,  
RCA connectors  
• Bare wire: Up to 10 gauge  
• One USB mini-B connector  
Two triggers - one power on/off & one programmable  
3.5mm mono mini plugs  
12VDC, 300mA maximum output draw  
• One 8-channel input array, RCA connectors  
• Six Stereo RCA connectors  
• One microphone, 3.5mm mono mini plug  
• 1 DOCK 30-pin connector (for optional docking station)  
• 1 FM antenna  
• 1 AM antenna  
• Input sensitivity = max input level 2Vrms  
S-Video& Composite Video Performance  
Compatibility  
A/D converter  
D/A converter  
NTSC, PAL, and SECAM  
12-bit, 110MHz  
Control  
• One RS-232, 9-pin, D-sub connector  
• One IR receiver, on front panel  
• One 3.5mm IR IN jack:  
Input Voltage: 3V - 15V  
Input Current: 10mA  
12-bit, 74.25MHz  
1V peak-to-peak/75Ω  
Input Level /  
Impedance  
Frequency: 20Hz - 1KHz  
Accepts either stereo plug (Tip/Ring/Sleeve) or mono  
plug (Tip/Sleeve)  
Output Level /  
Impedance  
1V peak-to-peak/75Ω  
Frequency Response Composite: 10Hz to 8MHz, -3dB  
S-Video: 10Hz to 8MHz, -3dB  
Component: 10Hz to 100MHz, -3dB  
HDMI Performance  
Signal-to-Noise Ratio >65dB  
HDMI Input  
Video: 480i/p, 576i/p, 720p, or 1080i  
Differential Gain  
Differential Phase  
Gain  
<0.2%  
Audio: Dolby Digital, DTS, & PCM (32, 44.1, 48, 88.2, 96 kHz,  
176.4 kHz, and 192 kHz)  
<0.5 degrees  
+/- 0.15dB  
HDMI Output  
Video: 480i/p, 576i/p, 720p, or 1080i  
Audio: Dolby Digital, DTS, & PCM (32, 44.1, 48, 88.2, 96kHz,  
176.4kHz. and 192kHz)  
A-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Appendix A  
Component Video Performance  
Audio Performance  
Compatibility  
Impedance  
Insertion Loss  
Bandwidth  
3-channel (Y, Pr, Pb), format-independent  
A/D conversion  
D/A conversion  
Input Sensitivity  
Input Impedance  
24-bit, 96kHz, dual-bit ΔΣ  
24-bit, 44.1 to 192kHz, multi-bit ΔΣ  
75Ω  
<3dB  
400mV for Analog 1 to 6, and 400mV for 8-ch input  
>100MHz  
98.5kΩ for Analog 1 to 6, and 32kΩ for 8-ch input  
Amplifier Outputs  
FM Tuner Performance  
Continuous Output 85W per channel, 8Ω, all channels driven, 20Hz to 20kHz  
Power  
Tuning Range  
Sensitivity  
87.5MHz to 108MHz  
Frequency Response 10Hz to 40kHz, +0, -2dB  
IHF 8 uV/19.2dBf  
+/- 400kHz, 70dB  
THD + Noise  
<0.05%, 20Hz to 20kHz, 1W  
<0.07%, 20Hz to 20kHz, 85W  
Selectivity  
Signal-to-Noise Ratio Mono: 70db, Stereo: 65dB  
IM Distortion  
Slew Rate  
<0.04%  
Image Rejection  
IF Rejection  
43dB  
17V/us (Condition: output 40 Vpp, 1k sine wave, rising time  
from 10% to 90%)  
75dB  
Stereo Separation  
Distortion  
51dB @ 1kHz  
Signal-to-Noise Ratio 95dB typical, 22kHz bandwidth  
min 95dBA, 90dBA typical  
Mono: 0.2%, Stereo: 0.1%  
AM Tuner Performance  
Preamplifier Outputs  
Tuning Range  
Sensitivity  
520kHz to 1720kHz  
Frequency Response 10Hz to 40kHz, +0, -2dB  
Loop 177uV/m  
+/- 10kHz, 25dB  
THD + Noise  
<0.05%, 20Hz to 20kHz  
Selectivity  
Dynamic Range  
100dB typical, 22kHz bandwidth  
Signal-to-Noise Ratio 45dB  
Signal-to-Noise Ratio 100dB typical, 22kHz bandwidth  
min 100dBA, 103dBA typical  
Image Rejection  
IF Rejection  
Distortion  
32dB  
40dB  
1.2%  
Output Level  
200mV typical, 5V maximum  
A-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Lexicon  
DECLARATION OF CONFORMITY  
General  
Power Requirements 120V, 60Hz, 1300W, IEC detachable power cord (supplied)  
Application of Council Directive(s):  
2004/108/EEC and 73/23/EEC as amended by 93/68/EEC  
230V, 50Hz, 1300W, IEC detachable power cords (supplied  
for EU & UK)  
Standard(s) to Which Conformity is Declared:  
EN 55013:2001 + A1:2003  
Power Consumption 4.82W at Power on, idle  
1235W at rated power output (7-channels driven)  
EN 55020:2002 + A1:2003 + A2:2005  
Dimensions  
• Height (with feet): 6.6 inches (168 mm)  
• Height (without feet): 6 inches (153 mm)  
• Width: 17.3 inches (440 mm)  
EN 61000-3-2:2000 + A2:2005  
EN 61000-3-3:1995 + A1:2001  
• Depth*: 15.6 inches (397 mm)  
Weight  
• Net Weight: 39.7 lb (18 kg)  
• Gross Weight: 55.1 lb (25 kg)  
EN 60065:2002  
Rack-Mounting  
Lexicon built rack mount kit not available.  
Please seek alternative.  
Manufacturer:  
Harman Specialty Group  
3 Oak Park Drive  
Operating  
Environment  
• Operating temperature: 0 to 45 C (32 to 113 F)  
• Storage temperature: -20 to 60 C (-4 to 140 F)  
• Relative humidity: 93% max without condensation  
Bedford, MA 01730-1413 USA  
Remote Control  
Hand-held, back-lit, IR/RF** pre-programmed and learning  
remote control (requires 4 AAA batteries – included)  
The equipment identified here conforms to the  
Directive(s) and Standard(s) specified above.  
*Depth measurement includes knobs, buttons, and terminal connections.  
**For use with optional RF-1 Receiver.  
Type of Equipment: Digital Receiver  
Model:  
Date:  
Lexicon RV-5  
January 2007  
Specifications are subject to change without notice.  
Harman Specialty Group  
Vice President of Engineering  
3 Oak Park Drive  
Bedford, MA 01730-1413 USA  
Tel: 781-280-0300  
Fax: 781-280-0490  
A-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
B
Appendix  
Main Menu: Audio Controls........................................................B-2  
Main Menu: Video Status............................................................B-2  
Main Menu: Setup ......................................................................B-3  
Setup Menu: Display Setup....................................................................... B-4  
Setup Menu: Surround Config .................................................................. B-4  
Setup Menu: Speaker/EQ Setup ...........................................................................B-5  
Setup Menu: Input Setup.......................................................................... B-6  
Note: All parameter values shown in the following menu trees indicate the  
default parameter value if the RV-5 is restored to its factory default state.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix B  
Lexicon  
MAIN MENU: AUDIO CONTROLS  
MAIN MENU  
AUDIO CONTROLS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
AUTO EQ: ON  
EQ PRESET  
EQ ADJUST  
TONE CONTROLS: OFF  
BASS: 0dB  
TREBLE: 0dB  
AUDIO STATUS  
EQ PRESET  
EQ ADJUST  
HF SHELF: 0dB  
ACTIVE PS: USER  
PRESET 1: FACTORY  
PRESET 2: FACTORY  
PRESET 3: FACTORY  
AUDIO STATUS  
INPUT: HD+  
NAME:  
CONNECTOR: ANALOG 3  
AUDIO: - - -  
MODE FAMILY: LOGIC 7  
MODE: MUSIC 5.1  
MAIN MENU: VIDEO STATUS  
MAIN MENU  
VIDEO STATUS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
INPUT RESOL: - - -  
COPY PROTECTION: OFF  
V-PROCESS: FAROUDJA  
OUTPUT RESOL: - - -  
COMPONENT OUT: 480i  
S-VIDEO OUT: OFF  
COMPOSITE OUT: OFF  
B-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Appendix B  
MAIN MENU: SETUP  
MAIN MENU  
SETUP  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
POWER ON SETTINGS  
DOLBY CONFIGURATION  
MODE: DOLBY PLII MUSIC  
CENTER WIDTH: 3  
DIMENSION: 0  
PANORAMA: OFF  
NIGHT: OFF  
INPUT SETUP 1  
INPUT: HD  
NAME: ________  
VIDEO IN: HDMI 1  
V-PROCESS: FAROUDJA  
VIDEO OUT: AUTO  
DIG AUDIO: HDMI 1  
SURROUND CONFIG  
DISPLAY SETUP  
CONNECTION: HDMI/DVI  
HDMI AUDIO OUT: NO  
ON-SCREEN DISPLAY  
FRONT PANEL DISPLAY  
LOGIC 7 DEFAULT: ON  
DOLBY MULTI-CHANNEL  
DOLBY 2.0  
DTS  
continued on page B-4  
PCM 44.1/48 kHz  
PCM 96kHz  
MUTE LEVELS  
MAIN ZONE: -30dB  
ZONE-2: -30dB  
ANLG AUDIO: NONE  
DIG/ANLG AUTO: ON  
continued on page B-4  
SPEAKER/EQ SETUP  
REAR AMP: REAR SPK  
MANUAL  
SEMI AUTOCAL  
FULL AUTOCAL  
INPUT SETUP 2  
MODE FAMILY: LOGIC 7  
MODE: FILM 5.1  
DEFAULT SUR: STANDARD  
A/D SAMPLE RATE: 48kHz  
A/V SYNC DELAY: 0 ms  
ADVANCED VIDEO  
POWER ON SETTINGS  
POWER ON VOL: -30dB  
DOCK AUTO POWER: ON  
continued on page B-5  
TRIGGER 2: OFF  
ZONE-2 OUT: ANALOG  
continued on page B-6  
B-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix B  
Lexicon  
SETUP MENU: DISPLAY SETUP  
ON-SCREEN DISPLAY  
2-LINE OSD: 3s  
MENU TIME OUT: 30s  
MAIN MENU  
SETUP  
DISPLAY SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
CONNECTION: HDMI/DVI  
HDMI AUDIO OUT: NO  
ON-SCREEN DISPLAY  
FRONT PANEL DISPLAY  
FRONT PANEL DISPLAY  
BRIGHTNESS: FULL  
TIME OUT: NONE  
POWER ON SETTINGS  
SETUP MENU: SURROUND CONFIG  
MAIN MENU  
SETUP  
SURROUND CONFIG  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
LOGIC 7 DEFAULT: ON  
DOLBY MULTI-CHANNEL  
DOLBY 2.0  
DOLBY MULTI-CHANNEL  
DOLBY 2.0  
DOLBY VIRTUAL: OFF  
LOGIC 7: ON  
STEREO DOWN MIX: ON  
DTS  
DTS  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DOLBY VIRTUAL: OFF  
LOGIC 7: ON  
PCM 44.1/48 kHz  
PCM 96kHz  
DTS 96/24: ON  
DTS NEO:6: ON  
DTS-ES MATRIX: ON  
DTS-ES DISCRETE: ON  
LOGIC 7: ON  
STEREO DOWN MIX: ON  
POWER ON SETTINGS  
PCM 44.1/48 kHz  
PCM 96kHz  
LOGIC 7: ON  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DOLBY VIRTUAL: OFF  
DTS NEO:6: ON  
HALL: ON  
LOGIC 7: ON  
DOLBY PLII: ON  
DOLBY PLIIx: ON  
DTS NEO:6: ON  
5/7 CH STEREO: ON  
5/7 CH STEREO: ON  
B-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Appendix B  
SETUP MENU: SPEAKER/EQ SETUP  
SETUP  
MAIN MENU  
SPEAKER/EQ SETUP  
REAR AMP: REAR SPK  
MANUAL  
SEMI AUTOCAL  
FULL AUTOCAL  
SPEAKERS  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
AUTO SETTINGS: OFF  
FRONT L/R: 80Hz  
CENTER: 80Hz  
PERFORMS SEMI-AUTOMATIC  
CALIBRATION  
SIDE L/R: 80Hz  
REAR/Z2 L/R: 80Hz  
SUB/LFE LPF: 80Hz  
SUBWOOFERS: 1  
SUB HPF: 20Hz  
MUTE LEVELS  
POWER ON SETTINGS  
PERFORMS FULL AUTOMATIC  
CALIBRATION  
SUB MODE: NORMAL  
MANUAL  
SPEAKERS  
SPEAKER DISTANCES  
OUTPUT LEVELS  
SPEAKER DISTANCES 1  
SPEAKER DISTANCES 2  
AUTO SETTINGS: OFF  
UNITS: FEET  
SIDE LEFT: 0.0ft  
SUBWOOFERS: 0.0 ft  
FRONT LEFT: 0.0 ft  
CENTER: 0.0 ft  
FRONT RIGHT: 0.0 ft  
SIDE RIGHT: 0.0 ft  
REAR RIGHT: 0.0 ft  
REAR LEFT: 0.0 ft  
OUTPUT LEVELS 1  
OUTPUT LEVELS 2  
AUTO SETTINGS: OFF  
INPUT: ALL  
REAR LEFT: 0dB  
SIDE LEFT: 0dB  
TEST TONE: OFF  
FRONT LEFT: 0dB  
CENTER: 0dB  
SUBWOOFER1: 0dB  
SUBWOOFER2: 0dB  
FRONT RIGHT: 0dB  
SIDE RIGHT: 0dB  
REAR RIGHT: 0dB  
B-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix B  
Lexicon  
SETUP MENU: INPUT SETUP  
MAIN MENU  
SETUP  
INPUT SETUP 2  
MODE FAMILY: LOGIC 7  
MODE: FILM 5.1**  
DEFAULT SUR: STANDARD  
A/D SAMPLE RATE: 48kHz  
A/V SYNC DELAY: 0 ms  
ADVANCED VIDEO  
INPUT SETUP 1  
INPUT: HD*  
NAME: ________  
AUDIO CONTROLS  
VIDEO STATUS  
SETUP  
DISPLAY SETUP  
SPEAKER/EQ SETUP  
INPUT SETUP  
SURROUND CONFIG  
DOLBY CONFIG  
MUTE LEVELS  
VIDEO IN: HDMI 1*  
V-PROCESS: FAROUDJA  
VIDEO OUT: AUTO  
ADVANCED VIDEO 2  
FLESHTONE NR: ON  
COMPNT ENHANCE: ON  
BRIGHTNESS: 100  
CONTRAST: 100  
COLOR: 100  
DIG AUDIO: HDMI 1*  
ADVANCED VIDEO 1  
POWER ON SETTINGS  
TRIGGER 2: OFF  
INPUT TYPE: DVD  
SHARPNESS: 32  
ANLG AUDIO: NONE*  
DIG/ANLG AUTO: ON  
ZONE-2 OUT: ANALOG  
NOISE REDUCTION: OFF  
X-COLOR SUPPRESS: ON  
DCDi INTERPOL: ON  
FILM DETECTION: ON  
FILM EDIT DETECT: ON  
*Audio/Video Input Factory Default Settings:  
PARAMETER  
HD  
DVD  
GAME  
SAT  
CABLE  
DVR  
CD  
DOCK  
PC  
TUNER  
AUX 1  
AUX 2  
HDMI 1  
HDMI 1  
None  
Component 1  
Coaxial 1  
None  
S-Video 1  
Optical 1  
None  
Component 2  
Coaxial 2  
None  
HDMI 2  
HDMI 2  
None  
Component 3  
Coaxial 3  
None  
None  
Coaxial 4  
None  
None  
None  
None  
USB  
None  
None  
S-Video 2  
Optical 2  
None  
S-Video 3  
Optical 3  
None  
VIDEO IN  
DIG AUDIO IN  
ANLG AUDIO IN  
Unplugged  
None  
TUNER  
**Mode Input Factory Default Settings for Each Mode Family:  
LOGIC 7 (L7)  
FILM 5.1  
DOLBY  
DSP  
STEREO (STER)  
DTS  
PLII MOVIE  
HALL 1 5CH  
2-CHANNEL  
NEO:6 5CH CINEMA  
B-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
C
Appendix  
Remote Control Programming ................................................... C-2  
Remote Control Light Button....................................................................C-2  
Transmitting Icon......................................................................................C-2  
Setting Up the Remote Control.................................................................C-3  
Lock Feature .............................................................................................C-6  
Advanced Customizing Tools....................................................................C-6  
Erasing Commands.................................................................................C-13  
Restoring Factory Default Settings...........................................................C-14  
Optional RF-1 Receiver............................................................. C-14  
Using the 3-Digit Code Library................................................. C-15  
3-Digit Pre-programmed Codes..............................................................C-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix C  
Lexicon  
REMOTE CONTROL PROGRAMMING  
The RV-5 remote control is a very powerful and flexible  
pre-programmed and learning remote control, designed to be the  
universal controller of your home theater system.  
MENU NAME  
LCD TOUCH  
SCREEN  
The RV-5 remote control can operate up to 14 home entertainment  
and home automation components by using the remote control’s  
pre-programmed code library, or by letting the remote control “learn”  
from another remote, one button at a time. The RV-5 remote control  
has many additional operating features to add convenience and  
enjoyment to the operation of any home entertainment system. You  
can create your own button labels on the LCD screen; program forty  
favorite channel buttons; operate the volume, channel and transport  
buttons from one device when you are controlling another device; and  
perform multiple tasks with the press of a single button.  
(Location of)  
TRANSMITTING  
ICON  
MENU  
OPTIONS  
LIGHT  
MENU PAGES  
POWER ON  
MAIN  
CHANNEL +/-  
POWER OFF  
VOLUME +/-  
The RV-5 remote control features extensive pre-programmed IR codes  
for practically all major audio and video equipment. It can set up and  
operate various components by simply entering a 3-digit code.  
MUTE  
MENU  
PREV CH  
REMOTE CONTROL LIGHT BUTTON  
GUIDE & INFO  
EXIT  
TRANSPORT  
FUNCTIONS  
The remote control is fully back lit, making it easy to use in low  
lighting conditions. Press the LIGHT button on the right side of the  
remote to back light all of the keypad buttons and the LCD touch  
screen. To turn off the back light, press the LIGHT button again or  
just stop pushing buttons. Ten seconds after the last button or  
touch screen selection, the back light automatically shuts off.  
SELECT  
NUMBER  
KEYPAD  
TRANSMITTING ICON  
ENT (Enter)  
When a command is transmitted by the remote control, a  
transmit icon appears in the top right corner of the LCD  
touch screen. This indicates that a signal is being sent by  
the remote control.  
C-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
RV-5  
Appendix C  
3. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
SETTING UP THE REMOTE CONTROL  
The RV-5 remote control can be set up so that it controls all of the  
components of your home entertainment system, making remote  
access simple and efficient. There are two ways to set up the remote  
control:  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
Pre-programmed Codes - Allows you to set up all of the but-  
tons at once, by entering the pre-programmed 3-digit codes of  
the component manufacturers.  
Button Learning - Allows you to transfer functions from other  
remotes, both old and new, one button at a time.  
4. Touch the P-PRO option to select the Pre-Programmed Method.  
The menu name changes to “P-PRO” and the menu options area  
now contains seven component options.  
Of the two methods, the pre-programmed codes method is the  
fastest, since all functions are programmed at the same time. However,  
it’s possible that a 3-digit code may not be available for your  
component. We recommend that you start with the pre-programmed  
code method and then perform the button learning method as  
necessary.  
Note: While in the Setup mode, the MAIN button acts as an escape  
button. Each time the MAIN button is pushed, it will back out of one  
menu layer.  
5. Select the component that you want to program. If the  
component you wish to setup is not on this page, touch the menu  
page arrow to select from the components on page 2.  
Pre-Programming Your Remote Control:  
Follow the steps below to set up your RV-5 remote control using the  
pre-programmed manufacturers’ codes.  
Once a selection is made, the bottom of the screen flashes  
“FROM TABLE”.  
The pre-programmed 3-digit codes for each component and  
manufacturer can be found at the back of this Appendix. The codes are  
listed by Component Category, such as TV, VCR, and DVD; then by  
brand name, such as Lexicon and Samsung.  
6. Confirm your component selection by pressing the button again  
for the type of component you want to program.  
Note: This step is necessary because the selection may not be the  
same for Steps 5 and 6. For example, if you are setting up the SAT  
option to be a second TV, then the first press in Step 5 would have  
been SAT and the second press in Step 6 would then be TV.  
1. Find the code listing for the component that you want to set up in  
the Pre-Programmed Codes library, found later in this chapter. If  
there is more than one code, be sure to note all of them as your  
component will only fully respond to one of them, so you may  
have to try multiple codes.  
7. Point the remote control at the component you want to program  
and enter the first of the 3-digit manufacturer’s codes using the  
number keypad on the remote.  
Note: 305 is the factory default setting for the Lexicon RT-20 Universal  
Disc Player.  
If the 3-digit code that you entered is the correct one, the  
component will turn off. If the component does not turn off,  
continue entering code numbers from your list until the  
component turns off.  
2. Turn on the component that you want to setup for remote  
control.  
C-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix C  
Lexicon  
Note: The DOWN and UP buttons on the touch screen can be used to  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
scroll the code number one digit at a time. If you hold your finger over  
the UP or DOWN button, the code number will scroll until your finger  
is removed.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
8. When the component turns off, press the ON button on the  
remote to turn the component back on. Test several functions to  
ensure that the component responds correctly to the remote  
commands. If any of the buttons do not work properly, you may  
not have the right code - enter the next code option on your list  
until you find the best match for the component.  
2. Touch the RECAL option. The touch screen now shows a four-page  
menu that lists each component name and the 3-digit code that  
was assigned to it.  
Note: If you are unable to find a code that will accurately control your  
component, then you’ll need to use the Button Learning procedure,  
which follows this procedure, to program the component.  
3. Write down the code number for each component for future  
reference. Appendix D of this manual provides a convenient table  
for you to record the 3-digit pre-programmed code numbers.  
9. Once you’ve found the right code, touch the SAVE option on the  
touch screen. The screen will blink “SAVED” two times, indicating  
that the code has been successfully saved.  
4. Exit the Setup mode by pressing the MAIN button until the touch  
screen displays MAIN in the menu heading area. The remote  
control is in normal operation mode again.  
10. Exit the Setup mode by pressing the MAIN button until the touch  
screen displays MAIN in the menu heading area. The remote  
control is in normal operation mode again.  
Button Learning Procedure For Your Remote Control:  
11. Repeat Steps 1 through 10 to program all other components in  
your home theater system. For any components that do not have  
a valid 3-digit code, continue to the Button Learning procedure to  
program those components.  
Follow the steps below to set up your RV-5 remote control using the  
Button Learning procedure. The RV-5 remote control can “learn”  
commands from other remote controls, both old and new, one button  
at a time. Follow the steps below to allow your RV-5 remote control to  
learn the button commands from other remote controls in your home  
theater system.  
Recalling Pre-Programmed Setup Code Numbers:  
Note: We recommend that you use this procedure only after you’ve  
determined that no 3-digit manufacturers’ codes exist for the component  
in question.  
In case you didn’t write down the pre-programmed code numbers  
that you used when you set up your Lexicon remote controls, these  
3-digit manufacturers’ numbers can be recalled. Perform the  
following procedure to recall the pre-programmed 3-digit code for  
any component.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
C-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
RV-5  
Appendix C  
1. Line up the RV-5 remote control with the other remote control,  
head-to-head, one or two inches apart.  
menu page arrows can be taught. The menu name will change  
to “READY” and the menu page area indicates the button that  
you pressed.  
6. Press and hold the button on the other remote control that you  
want to teach to the RV-5 remote. When the menu name on the  
touch screen of the RV-5 remote control changes to “GOOD” or  
“FAILD”, release the button.  
2. On the RV-5 remote control, press and hold the MAIN and ENT  
(Enter) buttons at the same time. After about 3 seconds, “SETUP”  
is displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
If “GOOD” is displayed, the bottom of the screen flashes  
“SAVED”. The learning procedure is complete and was  
successful.  
If “FAILD” is displayed, try teaching the same button once  
again by repeating Steps 5 & 6.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
7. Repeat Steps 4 through 6 to teach the RV-5 remote control any  
additional button commands from the component’s remote. To  
return to Step 4, press the MAIN button once.  
8. When you are done teaching the Lexicon remote control, exit the  
Setup mode by pressing the MAIN button until the touch screen  
displays MAIN in the menu heading area. The remote control is in  
normal operation mode again.  
3. Touch the LEARN option to select the Button Learning Method.  
The menu name changes to “LEARN” and the menu options area  
now contains seven component options. The bottom of the  
screen flashes “SELECT”.  
Test all your new commands. If any of them don’t work, try the button  
learning procedure again, keeping in mind the following suggestions:  
4. Select the component that you want to program. If the  
component you wish to setup is not on this page, touch the menu  
page arrow to select from the components on page 2.  
Move to another room. Plasma TVs, sunlight, halogen, or  
quartz lighting can interfere with the learning process.  
Once a selection is made, the menu name changes to the  
selected component name.  
Even though the old remote seems to be working fine,  
replace the current batteries with fresh alkaline batteries.  
If you want to teach any command to a component button on  
the RV-5 remote control, press the component button when  
the menu name says “LEARN”. The menu name will change to  
“READY” and the menu page area indicates the button that you  
pressed. If you pressed the wrong button, press the MAIN  
button to return to the Setup menu where you can start again  
(return to Step 3). Once “READY” is displayed, skip ahead to  
Step 6.  
Gradually vary the distance between the remote controls.  
Try 1-inch, 2-inches, and so on up to 4-feet.  
Try tapping the button on your old remote instead of just  
pressing and holding it during the learning process.  
The following list provides additional information regarding the button  
learning procedure and how the RV-5 remote control behaves when  
taught.  
5. Select the component option that you want to teach the  
command to - everything except for the MAIN button and the  
C-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
Learned functions override any existing pre-programmed  
ADVANCED CUSTOMIZING TOOLS  
functions on the remote control.  
Once the basic setup to your remote is complete, you can use the  
advanced features to further customize your RV-5 remote control. The  
advanced customizing tools include:  
All buttons can be taught except for the menu page arrows,  
MAIN button, and LIGHT button on the side of the remote.  
Learned functions are automatically erased when a new  
function is learned on the same button.  
Back light Options - Customize the back light feature to suit  
your preferences.  
Learned functions are retained even after  
a
different  
Touch Screen - Customize the displayed text for each device  
menu on the LCD touch screen.  
pre-programmed 3-digit manufacterer’s code is entered and  
saved to the remote.  
Favorite Channels - Set up your favorite channel list. Once this  
list is set up, up to 40 favorite channels can be selected by the  
press of a button - all without needing to remember or type in  
a channel number.  
To return to an original pre-programmed function, the learned  
function must be erased.  
LOCK FEATURE  
Macros - Power all of your components ON or OFF at the same  
time, with the press of one button.  
The RV-5 remote control has a locking feature, which prevents  
unauthorized use of the remote control. When the locking feature is  
active, all operations of the remote control are blocked. This feature  
can be used as a “child-lock” to prevent children from having  
unmonitored access to the home theater system.  
Remote Cloning - Clone other RV-5/MV-5 remote control from  
an already setup remote.  
Punch Throughs - Force buttons to work for specific devices,  
regardless of the device currently selected on the RV-5 remote  
control.  
To Activate the Lock Feature:  
Hiding & Adding Pages - Customize the visible pages on the  
touch screen display.  
Press and hold the +10 and ENT (Enter) buttons at the same time. After  
3 seconds, the bottom of the touch screen will blink “LOCKED” three  
times and then “LOCKED” will remain displayed. The Lock is now  
active.  
To Return to Normal Operation:  
While the remote is in the LOCKED condition, press and hold the +10  
and ENT (Enter) buttons at the same time. After 3 seconds, the  
“LOCKED” message is replaced by the last used mode is displayed. The  
Lock is now deactivated.  
C-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Appendix C  
Back light Time Out:  
Adjusting the Touch Screen Contrast:  
The back light feature lights the touch screen area and illuminates the  
buttons whenever the LIGHT button is pressed. The amount of time  
the back light remains on before timing out can be adjusted to your  
preferences. Follow the instructions below to change the back light  
time out setting.  
You can make the text in the touch screen area darker by pressing the  
MAIN and cursor buttons at the same time. To make the text  
appear lighter, press the MAIN and cursor buttons at the same time.  
Customizing the Touch Screen:  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
The LCD touch screen component names and commands can be  
customized to your preferences. Follow the instructions below to  
change the text in a selected touch screen menu.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
2. Touch the menu page arrow to access the second page of the  
SETUP menu.  
3. Press the LIGHT button to customize the back light time out  
setting. A new screen now displays ON, 10, SAVE, and EXIT. The  
bottom of the touch screen says “SECOND” and there’s a flashing  
box over the “1” digit. The current setting for the back light time  
out is “10” seconds.  
2. Touch the EDIT option to customize the touch screen option  
names. The menu name changes to “EDIT” and the bottom of the  
screen flashes “SELECT BUTTON”.  
4. Use the number keypad to enter a new time. The setting range is  
01 to 99 seconds. To turn the back light feature off, which saves  
battery life, touch the ON option. The ON button changes to OFF  
and the time is dashed out.  
3. Touch the TEXT option. The menu name still reads “EDIT” but  
now the component options are displayed.  
Once the TEXT option is pressed, the bottom of the screen  
flashes “SELECT”.  
5. Touch the SAVE option to save the new setting. Touching the EXIT  
option will leave the menu without saving any changes.  
4. Navigate to the menu page where you want to EDIT the text. You  
can edit either the component names or the specific component  
controls. The menu name will reflect the actual menu heading,  
“EDIT” will no longer be displayed.  
6. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
5. When the menu to be edited is displayed, touch the PAGE option  
until the desired screen is once again displayed.  
C-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix C  
Lexicon  
'ꢀ(ꢀ)ꢀꢅ  
6. Now touch the text that you want to edit. The first letter will start  
flashing with a black box.  
7. Changing the text requires  
the dual use of the number  
keypad and the up/down/  
left/right cursors. The  
number keypad has  
specific letters, numbers,  
and symbols defined for  
each key, as shown.  
Pressing the and ꢃ  
cursors will scroll through  
the defined characters of  
each number keypad  
button. Pressing the and  
cursors changes the  
position of the cursors in  
the text being edited.  
!ꢀ"ꢀ#ꢀꢄ  
$ꢀ%ꢀ&ꢂ  
-ꢀ.ꢀ/ꢀꢃ  
6ꢀ7ꢀ8ꢀꢈ  
*ꢀ+ꢀ,ꢀꢁ  
3ꢀ4ꢀ5ꢀꢇ  
01ꢀ2ꢀꢆ  
9:ꢀꢉ  
50 #523/2  
"UTTON DELETES ALL TEXT  
,%&4 #523/2  
-OVES BLINKING  
CHARACTER LEFT  
$/7. #523/2  
DELETES THE CURRENTLY  
BLINKING CHARACTER  
ꢊ ꢋ ꢀꢁꢂꢁꢃꢁꢄꢁ  
ꢅꢁ__ꢁꢆꢁꢇ ꢌ ꢍ  
ꢎ ꢏ ꢐ ꢑ ꢒ ? h  
2)'(4 #523/2  
-OVES BLINKING  
CHARACTER RIGHT  
",).+).'  
#(!2!#4%2  
8. When you are finished editing, touch the text that you just edited.  
“SAVED” flashes at the bottom of the display and then “SELECT”  
will blink again.  
To edit any other menu options in the same menu, touch the  
next button when “SELECT” is displayed again. Repeat Steps 6  
through 8.  
To edit a menu option in a different menu, press the MAIN  
button once and then repeat Steps 4 to 8.  
9. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
C-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
Favorite Channel Access:  
5. Touch the menu option for the component that you will use to  
enter the channel number (typically either TV, SAT, or CABLE).  
To access the Favorite Channel listings, press the MAIN button to  
display page 1 of the Main menu. Touch the FAV (Favorite Channel)  
button on the touch screen. A list of favorite TV & cable stations is now  
displayed. Each option can be set to instantly select the channel on  
your TV. There are five pages of eight favorite channels for a total of  
forty buttons.  
6. Enter the channel number using the number keypad buttons on  
the remote.  
Note: Some brands of televisions require an ENT (Enter) command  
after the channel numbers are entered.  
If a number is repeated when setting the channel, for example  
channel 522, it is usually best to set a half second delay in  
between the identical numbers by pressing the PAUSE (||)  
button. Each press of the PAUSE button increases the delay by  
half a second.  
Favorite Channel Setup:  
Before the Favorite Channels can be selected, they must be setup for  
your home theater. Follow the instructions to setup your favorite  
channel listing.  
7. Press the LIGHT button after you enter the channel number. A new  
screen now displays with the options: SAVE, UNDO, and EXIT.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
8. To save the channel you just entered, touch the SAVE option. The  
UNDO option allows you to erase the last entry. The EXIT option  
erases all entries for this channel.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
9. To setup additional favorite channels, repeat Steps 3 through 6.  
10. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
2. Touch the FAV option to setup your favorite channels. The menu  
name changes to “FAV” and the bottom of the screen flashes  
“SELECT”.  
3. Navigate through the FAV menus until you find the favorite  
channel that you want to setup.  
Note: You can customize the name of each favorite channel, if  
desired. Refer to the “Customizing the Touch Screen” procedure,  
found previously in this chapter.  
4. Touch the favorite channel that you want to setup. The menu  
name will change to display the channel name that was selected.  
The bottom of the touch screen displays “STEP 0”, indicating that  
you have not yet entered the channel number.  
C-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix C  
Lexicon  
Macro Power ON Setup:  
Note: If desired, you can also program delays into the macro between  
the commands, by pressing the PAUSE (||) button. Each press adds  
half a second to the delay.  
Any of the touch screen menu options can be setup as Macro buttons.  
Follow the instructions below to setup a macro button that will power  
ON several components at once.  
8. When all of the components have been added to the macro, press  
the LIGHT button. The menu name changes to “MACRO” as a  
new screen is displayed with the options: SAVE, UNDO, and EXIT.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
9. To save the macro you just entered, touch the SAVE option. The  
UNDO option allows you to erase the last step. The EXIT option  
erases all steps for the macro.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
10. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
Note: There is no touch screen menu listing for the macro you just  
saved. However, when you press the ON button on the remote for one  
of the included components, MACRO is displayed in the bottom of the  
touch screen area.  
2. Touch the MACRO option to setup a macro to power ON several  
components at the same time. The menu name changes to  
“MACRO” and the bottom of the screen flashes “SELECT”.  
Macro Power OFF Setup:  
3. Touch the ON option. The menu name changes to “ON” and the  
bottom of the touch screen flashes “STEP 0”, indicating that no  
macro steps have been entered yet.  
To create a macro which will turn OFF several components at the same  
time, just follow the same steps as listed above, but press the OFF  
button instead of the ON button.  
4. Touch a component option that you want the macro to turn ON.  
Use the menu page arrows to navigate to the other menu pages, if  
required. The menu name changes to the name of the component  
option that you touched and the bottom of the screen now flashes  
“STEP 1”.  
Macro Using Component Button Setup:  
To setup a macro to use a component, in Step 2 of the procedure  
above, after pressing MACRO, press the page button twice. The  
menu name changes to MAIN. Touch the component option that you  
want to set as the macro button. You can navigate to page 2 if  
necessary. Now continue in the procedure to Step 3 and follow the rest  
of the procedure to completion.  
5. Press the ON button again to confirm the action. The Step  
Indicator now displays “STEP 2”.  
Note: The Step Indicator is a macro step counter. Every button that is  
pressed will increase the Step Indicator by one. But each macro can  
store up to 190 steps.  
Setting a “Press & Hold” Macro:  
6. Press the MAIN button to return to the Main component listing.  
Another option for the component button macros is to only send the  
macro if the component button is held down. The advantage of this  
option is that a normal press of the component button will simply  
7. Repeat Steps 4 through 6 until all of the components that you  
want to power ON at once have been added to the macro.  
C-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RV-5  
Appendix C  
switch components without triggering the macro. Only holding down  
the component button will trigger the macro.  
5. On the “master” remote, touch the SEND option. The SEND/RECV  
options are replaced with “START” and the bottom of the touch  
screen flashes “PRESS START”.  
To set the “Press & Hold” macro, enter a delay as the first step of the  
macro by pressing the PAUSE (||) button. Each press adds half a second  
to the delay. The amount of delay determines how long the user must  
hold down the button before the macro is sent.  
6. First on the “slave” remote and then on the “master” remote,  
touch the START option to begin the cloning process.  
Note: Cloning typically takes about 40 seconds. After a successful  
cloning is complete, the newly cloned remote will flash “GOOD”.  
7. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
Cloning other Lexicon RV-5 Remote Controls:  
If you happen to own more than one RV-5 remote control, you can  
copy and transfer the setup from one remote to the other. Follow the  
instructions below to clone your RV-5 remote control.  
Setting System Volume Control & Other Punch Throughs:  
1. On both the programmed remote control and the remote that  
you want to program, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
The RV-5 remote control provides the option of setting up the volume  
control over all of the components in your home theater system, even  
with components that don’t have their own built-in volume controls,  
such as TiVo. This is a very powerful feature as, once it’s setup, it will  
save you the constant hassle and inconvenience of switching between  
component modes to individually adjust volume controls. This feature  
is called a “Punch Through” and is not limited to strictly volume  
control. Follow the instructions to set the system volume control. Then  
see the note following the instructions to learn what other punch  
through features are available.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
2. Touch the CLONE button on both remotes. The menu name  
changes to “CLONE” and the bottom of the screen flashes  
“SELECT BUTTON”. A new screen now displays with the options:  
SEND, RECV, and EXIT.  
1. Since a home theater system may use the RV-5 for its sound  
source, first you must identify which component you want to use  
for the system sound/volume control.  
2. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
Touching the EXIT option will leave the menu without making  
any changes or triggering the cloning process.  
3. Line up the “master” remote control with the “slave” remote  
control, head-to-head, one or two inches apart.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
4. On the “slave” remote, touch the RECV option. The SEND/RECV  
options are replaced with “START” and the bottom of the touch  
screen flashes “PRESS START”.  
C-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix C  
Lexicon  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
CH - Channel Up, Channel Down, Previous Channel, and  
Channel (0 to 9 Number Keypad) buttons  
PLAY - Play, Stop, Pause, Rewind, and Fast Forward  
3. Touch the PUNCH option to setup the system volume control. The  
menu name changes to “PUNCH” and the bottom of the screen  
flashes “SELECT BUTTON”. A new screen now displays with the  
options: VOL, PLAY, CH, and VOD.  
VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, and  
Select  
To set any of the other punch through features, perform the Steps for  
the System Volume control, but in Step 4, touch the desired alternate  
control option (CH, PLAY, or VOD).  
4. Touch the VOL (Volume) option. The menu name changes to  
“VOL” and the component options are displayed. The VOL option  
sets up the group of three buttons - Volume Up, Volume Down,  
and Mute - all in one action.  
Hiding and Adding Pages:  
The bottom of the touch screen flashes “PUNCH TO”. Touch  
the option for the component that doesn’t have volume control  
commands yet (like the DVD). This is the component you are  
going to PUNCH TO for the volume and mute commands.  
Each of the component touch screen menus actually contains five  
pages. However, in most cases, only two to four pages are visible in the  
factory default settings; the rest of the menu pages are hidden. If you  
wish to use the hidden pages, you can ADD them. If you don’t want to  
use some of the existing pages, you can HIDE them. Follow the  
instructions below to add or hide pages in both the component and  
favorite menus.  
Note: If you want to PUNCH TO the MAIN component, press the  
POWER OFF button at this time.  
5. The bottom of the display will then flash “PUNCH FROM”. Now  
select the MAIN component that has the volume commands that  
you want to use (for example, “LEX” for the RV-5 Receiver). The  
bottom of the touch screen flashes “SAVED”.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
6. Repeats Steps 4 & 5 to add all of the components that you’d like  
to control through the system volume control.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
7. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
The Punch Through feature is NOT limited to volume and can also be  
applied to channel selection and other functions. If you find yourself  
switching to a particular component frequently to use a group of  
controls, consider using Punch Through for another group. The  
available punch through features, and the controls that the punch  
through operates, are:  
2. Touch the EDIT option to add and hide touch screen menu pages.  
The menu name changes to “EDIT” and the bottom of the screen  
flashes “SELECT BUTTON”.  
A new screen now displays with the options: TEXT, PAGE, and  
EXIT. Touching the EXIT option will leave the menu without  
saving any changes.  
VOL - Volume Up, Volume Down, and Mute  
C-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RV-5  
Note: The TEXT option allows the text of each menu to be changed.  
Appendix C  
the remote control is no longer in Setup mode. If this occurs, you will  
need to repeat this step to re-enter the Setup mode.  
Refer to the “Customizing the Touch Screen” procedure, found earlier  
in this chapter, for instructions.  
2. Touch the ERASE option to erase learned buttons, macros, or  
favorite channels. The menu name changes to “ERASE” and the  
bottom of the screen flashes “SELECT BUTTON”.  
3. Touch the PAGE option. The menu name changes to “PAGE” and  
the component options are displayed. The bottom of the touch  
screen flashes “SELECT”.  
A new screen now displays with the options: LEARN, FAV,  
MACRO, and EXIT. Touching the EXIT option will leave the  
menu without making any changes.  
4. Navigate to the menu and page that you want to HIDE or ADD.  
When you select a page, the top of the screen indicates whether  
you want to “ADD?” or “HIDE?” the displayed page.  
3. Touch either the LEARN, MACRO, or FAV option. A new screen  
now displays with the following options:  
5. When you’re ready to change a page’s visibility, to ADD or HIDE it,  
press the LIGHT button.  
ALL - Erases ALL of the specified LEARNED, MACRO, or FAV  
buttons everywhere in the remote.  
6. Repeat Steps 4 and 5 to ADD or HIDE any menu pages desired on  
other components or the favorites pages.  
DEVICE - Erases all the LEARNED or MACRO buttons in a  
SINGLE component. This option is not available for FAV  
(Favorite) channels since they are not tied specifically to a  
component.  
7. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
KEY - Erases one button only.  
ERASING COMMANDS  
4. If you touch ALL, the remote will prompt you by displaying  
“SURE?”. After the SURE prompt is touched, all the buttons will be  
erased.  
You can erase an individual button with a learned command, a macro,  
or a favorite channel. You can erase an ENTIRE component’s learned  
command or macro buttons. You can also erase ALL of your learned  
commands on ALL components, or all your macros and favorite  
channels everywhere.  
5. If you touch DEVICE, a list of component options are displayed.  
Touch the component option that you wish to erase. The bottom  
of the screen will flash “ERASE” twice, then “ERASED”.  
6. If you touch KEY, you’ll need to navigate to the component that  
you want. Touch a button to erase it. The bottom of the screen will  
flash “ERASE” twice, then “ERASED”.  
Note: To erase everything and return the remote control to its factory  
default settings, refer to the “Restoring Factory Default Settings”  
procedure, which follows this secton.  
7. When finished, exit the Setup mode by pressing the MAIN button  
until the touch screen displays MAIN in the menu heading area.  
The remote control is in normal operation mode again.  
1. On the remote control, press and hold the MAIN and ENT (Enter)  
buttons at the same time. After about 3 seconds, “SETUP” is  
displayed in the Menu name area at the top of the LCD touch  
screen. This is the Setup mode of the remote control.  
NOTE: You now have 30 seconds to perform the next step while the  
remote is in the Setup mode. If a button is not pressed within 30  
seconds, the SETUP menu name will revert to MAIN, indicating that  
C-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix C  
Lexicon  
RESTORING FACTORY DEFAULT SETTINGS  
OPTIONAL RF-1 RECEIVER  
If you’re afraid you’ve accidently overwritten functions that you  
wanted, or want a “clean-slate” to start from, the remote control can  
be reset to its factory default settings. Follow the instructions below to  
restore the factory default settings.  
The optional RF-1 Receiver utilizes the RF feature of the Lexicon remote  
control, allowing you to control components that are completely  
out-of-sight, up to 100-feet away. Since the RF-1 Receiver picks up the  
RV-5’s remote control radio frequency signal, the remote control no  
longer needs to be pointed directly at the components to control  
them. Now you can close your entertainment center doors, hide your  
components, and still control them with ease.  
Note: Restoring the Factory Default Settings will ERASE all customized  
features, including renamed components, learned buttons, and  
macros.  
1. On the remote control, press and hold the MAIN and STOP  
buttons at the same time. The bottom of the touch screen flashes  
“WARNING!”.  
The RF-1 Receiver accessory requires no setup to the Lexicon remote  
control in order for the feature to work - you need only place the RF-1  
Receiver in the rack or cabinet, or attach an emitter to the RV-5 front  
panel over the IR receiver. Every time a command is sent from the  
remote control, it sends both a standard IR and an RF signal. The RF-1  
Receiver automatically receives the remote’s radio signals and  
translates them into the infrared commands that control the  
components.  
NOTE: You now have 3 seconds to perform the next step. If a button  
is not pressed within 3 seconds, the RESET heading will revert to  
MAIN, indicating that the remote control is no longer in Reset mode. If  
this occurs, you will need to repeat this step to re-enter the Reset  
mode.  
Note: The Lexicon remote control radio signals will not control components  
directly. You must have the RF-1 Receiver installed to receive the remote’s  
radio signals. Components that came with “no pointing” radio remote  
controls cannot be operated by the Lexicon remote unless the component  
can be switched to standard IR via its internal menus. Some remote  
control ceiling fans are radio only and cannot be operated by the Lexicon  
remote.  
2. After about 10 seconds, “RESET” is displayed in the Menu name  
section at the top of the LCD touch screen.  
A new screen now displays with three options: ALL, PROG, and  
EXIT. Touching the EXIT option will leave the menu without  
making any changes.  
3. Touch the ALL option. The remote will prompt you by displaying  
“SURE?”. After the SURE prompt is touched, the factory default  
settings are restored.  
4. When the remote is done restoring the factory default settings, the  
menu heading reverts to MAIN. When the touch screen displays  
MAIN in the menu heading area, then the remote control is in  
normal operation mode again.  
C-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Appendix C  
3-DIGIT PRE-PROGRAMMED CODES  
USING THE 3-DIGIT CODE LIBRARY  
AUDIO  
The following pages contain the code library for the 3-digit  
pre-programmed manufacturers’ codes for most home theater  
equipment. The code library is divided into categories, such as TV and  
VCR. Each category may include several different types of components.  
Manufacturer  
ADC  
Codes  
007  
ADCOM  
AIWA  
082 092 161 225 269 355 356 366  
018 104 170 188 202 203 211 213  
AKAI  
AMC  
138 189  
The categories, and the types of components each category includes,  
are:  
038 125 126 127 128 258 281 282  
054  
196  
142  
335 336 337 338 339  
141 418 419  
AMEND  
AMX  
ANGSTROM  
ANTHEM  
ARCAM  
TV - TVs, Plasmas, Projectors, and Monitors  
CABLE - Cable TVs and Web TVs  
DVD - DVD Players and TV/DVD combos  
VCR - VCRs and TV/VCR combos  
AUDIO - Amps, Preamps, A/V Receivers, and XM Radios  
SAT - Satellite Receivers  
ATLANTIC TECHNOLOGY 342  
AUDIO ACCESS  
AUDIO ALCHEMY  
AUDIO DESIGN  
AUDIO EASE  
AUDIO FILE  
AUDIO MATRIX  
AUDIO SOURCE  
AUDIO TECHNICA  
B & K  
147  
135  
011 194 221  
021 196 207  
071  
167  
273  
134  
CD - CD Players and CD Changers  
DVR - TiVo, Replay, and other DVRs  
LDP - Laser Disc Players  
096 097  
LIGHT - Lighting Systems and Dimmers  
TAPE - Tape Decks  
BOSE  
070 170 224 347 409 459 460 532  
BOSTON ACOUSTICS  
BRYSTON  
CAMBRIDGE AUDIO  
CARVER  
CASIO  
CHIRO  
447  
023  
522  
PHONO - Phonographs  
006 022 028 029 061 071 077 180 185 201 214 226 284  
076  
140  
AUX - Multimedia PCs, Xbox, iPod Controls, and Custom  
Installation Products  
CINEMA SOUND  
CITATION  
CLARION  
034 134  
148 272  
026  
537  
Within each category, the code numbers are listed in rows by brand,  
such as Lexicon and Samsung. Some brands have more than one  
3-digit code for you to try.  
CLASSE  
COMPAQ  
382  
CURTIS MATHES  
DELPHI  
076  
415 515  
DENON  
002 027 034 037 109 215 229 230 234 259 330 340 341  
349 350 400 401 402 444 564  
C-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix C  
Lexicon  
AUDIO  
AUDIO  
Manufacturer  
MCINTOSH  
MCS  
Manufacturer  
EAD  
Codes  
466  
149  
Codes  
238 286  
076  
EIGER  
ELAN  
057 290  
MERIDIAN  
MITSUBISHI  
MONDIAL  
MYRYAD  
NAD  
NAKAMICHI  
NEC  
NIRO  
012 013 100  
204 242 243  
042 043 081 112 157 158  
276 293  
113 186 283 478 479  
111 172 183 244 245 287  
176  
343  
403  
ENLIGHTENED AUDIO 099 098  
ESCIENT  
368 381 451 452 453 454  
FANFARE  
FISHER  
352  
047 180 182 214 297  
FLEXTRONICS  
FOSGATE  
378  
062 231  
NILES  
FOSGATE AUDIONICS 342  
ONKYO  
017 046 064 079 080 090 107 108 187 179 209 270 275 438  
026 041 138  
342  
032 177 195 219 292 383 516  
129 130 132 261 294 295 333 334  
196  
063 119 249 250 251  
014 033 035 039 044 045 050 069 078 116 159 168 198 480  
029 515  
464  
144 268  
010 048 067 117 156 288  
019 056 073 075 095  
351  
162  
074 083 085  
379 391 392  
016 571  
040 048 065 110 119 228  
047 059  
019 091  
076  
026 094 131 175 181  
024 030 038 051 055 102 103 105 106 447  
015 018 093 101 160 166 184 218 223 247 248 271 353 369  
372 380 417 421  
036  
GE  
GOLDSTAR  
HAFLER  
HARMAN KARDON  
HITACHI  
IMERGE  
INKEL  
INTEGRA  
JAMO  
056 260  
008  
174  
OPTIMUS  
OUTLAW  
PANASONIC  
PARASOUND  
PHAST  
118 121 153 154 227 231 233 254 277 317 318 365  
020  
371  
197  
354 438  
398  
263  
076 216  
PHILIPS  
PIONEER  
POLKAUDIO  
PRIMARE  
PROCEED  
RCA  
REALISTIC  
REQUEST  
REVOX  
JBL  
JCPENNY  
JEFF ROWLAND  
JENSEN  
JVC  
KENWOOD  
206  
058  
114 163 191 240 266 279 291  
005 026 066 145 146 151 180 181 182 190 192 197 199 222  
280 374 550  
140 220  
331  
216 573  
072 150 376 384  
007  
120 235 236 237 357 358 359 360 361 362 363 364  
124 377  
004 009 052 115 137 139 165  
056 076  
086 152 164 208  
006 028 031 040 063 119 185 186 251 265 289 296 492  
ROTEL  
RUSSOUND  
SAMSUNG  
SANSUI  
SANYO  
SCOTT  
SEARS  
SHARP  
SHERWOOD  
SONY  
KINERGETICS  
KLH  
KOSS  
KRELL  
KYOCERA  
LEXICON  
LINN  
LUXMAN  
LXI  
MAGNAVOX  
MARANTZ  
SOUNDESIGN  
C-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
AUDIO  
CABLE/WEB TV  
Manufacturer  
SOUNDMATTERS  
SOUNDSTREAM  
SSI  
Codes  
Manufacturer  
Codes  
003 004 039 042 046 053 103  
043 074  
375  
084 088  
068  
171  
ABC  
ADELPHIA  
ADVANCED NEWHOUSE 043  
SUMO  
SUNFIRE  
ALTRIO  
043  
344 345 346 494  
138  
005 019 049 111 212 217  
122 176 177 178 193 200 219 257 262  
AMERICAST  
ARCHER  
099  
TAEKWANG  
TEAC  
TECHNICS  
THETA DIGITAL  
TOSHIBA  
005 007 014  
074  
ARMSTRONG  
AT&T BROADBAND  
136  
074  
060 087 198 278  
180  
026 067 089 169 173 205 232 253 264 274 285 332 373 432  
433  
ATLANTIC BROADBAND 043 074  
WARDS  
YAMAHA  
BELL SOUTH  
BLUE RIDGE  
BRESNAN  
099  
043 074  
074  
ZENITH  
143 210  
BRIGHT HOUSE  
BUCKEYE COMM  
CABLEVISION  
CENTURION  
CENTURY  
043 110  
074  
AUDIO-XM Radios & Tuners  
BOSE  
DELPHI  
FANFARE  
KENWOOD  
POLKAUDIO  
SONY  
170 532  
415 515  
352  
043 074 108  
092  
007  
550  
515  
CHARTER  
043 074  
007  
380  
CITIZEN  
COGECO  
074  
COMBANO  
COMCAST  
COMSAT  
080 081  
043 074 110  
074  
COX DIGITAL  
DIGICABLE  
EAGLE  
043 074  
101  
020 030 040  
057 066  
106  
EASTERN  
ECHOSTAR  
ELECTRICORD  
GEMINI  
032  
008 054  
072  
GENERAL ELECTRIC  
GENERAL INSTRUMENT 074 103 104  
GNC 099  
C-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
CABLE/WEB TV  
Manufacturer  
CABLE/WEB TV  
Manufacturer  
Codes  
Codes  
GOLDEN CHANNEL  
HAMLIN  
030  
SERVICE ELECTRIC  
SHAW  
074  
074  
043  
049 050 055  
HITACHI  
055 103  
SIGECOM  
INSIGHT  
074  
SONY  
096 108  
JERROLD  
MAGNAVOX  
MASSILLON  
MEDIA ONE  
MEDICOM  
MEMOREX  
MITSUBISHI  
MOTOROLA  
MOVIE TIME  
MOXI  
002 003 004 008 009 010 069 074 103  
SPRUCER  
047 078  
010 012 064 079 094 095  
STARCOM  
STARGATE  
002 004 008 009  
008 030 097 104  
043 074  
074  
107  
SUSQUEHANNA  
TIME WARNER  
TOCOM  
074  
043 074  
052  
039 040 056  
052  
102  
TOSHIBA  
074 109 110 111  
UNITED CABLE  
UNIVERSAL  
VIDEOTRON  
VIEWSTAR  
004 053  
028 032  
005 007 014 032 035  
043  
111  
NCTC  
074  
012 015 018 086 087 088 089  
043 099  
NSC  
015 028 038 071  
WIDE OPEN WEST  
ZENITH  
OAK  
031 037 053  
052 060 093 100  
PACE  
043 074  
PANASONIC  
PARAGON  
PHILIPS  
044 047  
052  
006 012 013 020 085 095  
PIONEER  
PRUCER  
034 043 051 063 076 103 105  
059  
PULSAR  
052  
RCA  
047  
RCN  
074  
RECOTON  
REGAL  
098  
049 050  
REGENCY  
RODGERS  
SAMSUNG  
SCIENTIFIC ATLANTA  
SEREN  
057  
043  
030  
003 011 041 042 043 045 046  
043  
C-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
CD  
CD  
Manufacturer  
Codes  
042 062  
Manufacturer  
Codes  
ADCOM  
KOSS  
061  
241  
005  
102  
AIWA  
059 065 088 089 105 122 170 187  
KRELL  
AKAI  
085 195 202  
KYOCERA  
LOTTE  
AMC  
231 232  
AMEND  
118  
LUXMAN  
LXI  
011 028 070 076 249 252  
ARCAM  
238  
059  
AUDIO ACCESS  
AUDIO EASE  
AUDIO TECHNICA  
BSR  
119 147  
MAGNAVOX  
MARANTZ  
MCINTOSH  
MCS  
044 107  
165  
027 041 044 051 077 107 209 246  
046  
212 247  
014 073 092  
010  
037 057  
CALIFORNIA AUDIO  
CAPETRONIC  
CARRERA  
CARVER  
008 103  
MEMOREX  
MISSION  
MITSUBISHI  
MITSUMI  
MODULAIRE  
MONDIAL  
MYRYAD  
NAD  
063  
044 107  
179  
057 080  
041 044 050 086 107 130 134 135 138 139 167 185 203  
153  
204  
182  
CASIO  
111 182  
147  
CLARINETTE  
CREEK  
182  
155 244  
005 006 067 178  
095 217 218 219  
014 062  
046  
159  
CROWN  
DENON  
EMERSON  
FISHER  
035  
NAKAMICHI  
NEC  
002 123  
042 069 102  
NIKKO  
008 050 134 185  
NSM  
044 107  
030 038 039 168 169  
FRABA  
111  
ONKYO  
GENEXXA  
GOLDSTAR  
HAITAI  
010 069 102  
OPTIMUS  
PANASONIC  
PARASOUND  
PHILIPS  
010 050 057 058 081 082 083 085 093 195  
080  
008 068 103 172 201 248  
233 240  
093  
HARMAN KARDON  
HITACHI  
INKEL  
018 033 047 208  
041 044 107 246 253  
010 020 025 056 174 175 176  
239  
042 175  
PIONEER  
PROCEED  
PROTON  
QUASAR  
RADIO SHACK  
RCA  
130 143 144  
JC PENNEY  
JENSEN  
014 061 092 141  
044 107 228  
158  
008 103  
JVC  
004 022 136 163 213 214 242 243  
007 023 055 071 072 137 142 185 254  
182  
KENWOOD  
017 042 150  
C-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
CD  
DVD  
Manufacturer  
Codes  
042 050 051 102 181 182 187  
Manufacturer  
Codes  
REALISTIC  
ROTEL  
AIWA  
146  
044 107 161 178 250  
ALPINE  
098  
SAE  
044 107  
APEX DIGITAL  
ARCAM  
087 111 112 115 116  
SANSUI  
044 069 107 125 128 171 190  
122  
215  
SANYO  
050  
CAMBRIDGE AUDIO  
SCOTT  
069 102  
CARY AUDIO DESIGN 174  
SHARP  
026 031 051 066  
CLASSE  
COBY  
167  
SHERWOOD  
SIGNATURE  
SONY  
003 019 051 096 112 115 119 166  
258  
033  
DENON  
FUNAI  
007 080 173  
048 081 097 126 133 164 177 225 226  
143  
SOUNDESIGN  
SUMO  
251  
GATEWAY  
GE  
175  
155  
026 027  
SYLVANIA  
SYMPHONIC  
TAEKWANG  
TANDY  
044 107  
GO VIDEO  
HARMAN KARDON  
HITACHI  
ILO  
137 218 220 221 222  
052 181  
084 140  
101  
085 195  
010  
268  
TEAC  
015 034 036 051 052 079 101 131 140  
INTEGRA  
JVC  
142 180  
012  
TECHNICS  
TECHWOOD  
THETA DIGITAL  
TOSHIBA  
VECTOR RESEARCH  
VICTOR  
008 060 068 103 172 184 200  
076  
KENWOOD  
KISS  
151  
234 235  
179 279  
135  
006 067 091 148 160  
080  
KLH  
KRELL  
104  
004 022 114 124  
033 185  
LEXICON  
148 305  
WARDS  
Note: 305 is factory default setting for Lexicon RT-20  
YAMAHA  
YORX  
024 046 054 183 186 245  
182  
LG  
057 074 091  
264 265  
066 096  
267  
LITEON  
MAGNAVOX  
MALATA  
MARANTZ  
MERIDIAN  
MITSUBISHI  
MYRYAD  
NAD  
083 095  
153  
017  
102 134  
088 155  
C-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
DVD  
Manufacturer  
Codes  
DVD  
Manufacturer  
Codes  
NAKAMICHI  
ONKYO  
103  
035 076 180  
DVD-TV/DVD Combos  
OPPO  
266  
PANASONIC  
PHILIPS  
021 042 138 139 144 150  
AIWA  
146  
066 083 095 105 166  
FUNAI  
143  
165  
143  
143  
130  
PIONEER  
POLAROID  
PRIMARE  
PROCEED  
PROSCAN  
RCA  
023 092 099 107 108 131  
SAMSUNG  
SYLVANIA  
SYMPHONIC  
TOSHIBA  
233 234 237  
193 194  
086  
026 027  
026 027  
DVD-TV/DVD/VCR Combos  
RJTECH  
269  
MAGNAVOX  
PANASONIC  
SYLVANIA  
143  
144  
143  
164  
ROTEL  
204  
SAMSUNG  
SANSUI  
056 070 119 137 159 165 170  
154  
TOSHIBA  
SANYO  
147  
SENSORY SCIENCE  
SHARP  
222 223  
DVD-DVD/VCR Combos  
094  
GO VIDEO  
PANASONIC  
PHILIPS  
137 218  
SONY  
033 118 126 145 191  
150  
SYLVANIA  
SYMPHONIC  
TAG MCLAREN  
TATUNG  
TEAC  
143  
105 (VCR Functions for VCR, 067)  
143  
POLAROID  
SAMSUNG  
SANSUI  
234  
156  
137 159  
102  
154  
270  
SONY  
145 191  
THOMPSON  
THULE  
026 027  
TOSHIBA  
ZENITH  
141  
177  
091 (VCR Functions for VCR, 171)  
TOSHIBA  
VENTURER  
VINC  
034 035 130 141 164 188  
149  
161  
YAMAHA  
ZENITH  
042 089 166 195 197  
057 074 091  
C-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
DVD  
Manufacturer  
LD  
Codes  
Manufacturer  
Codes  
206 207  
DENON  
DVD-DVD Recorders  
FUNAI  
120  
KENWOOD  
MAGNAVOX  
MARANTZ  
MITSUBISHI  
NAD  
013 152  
032 121  
211  
GATEWAY  
GO VIDEO  
ILO  
175  
220 221 222  
268  
121  
KISS  
279  
121  
LITEON  
265  
OPTIMUS  
PANASONIC  
PHILIPS  
013 049  
113  
PANASONIC  
SENSORY SCIENCE  
SONY  
139  
222  
032  
191  
PIONEER  
RADIO SHACK  
RCA  
106 117 121  
120  
TOSHIBA  
188  
002  
DVR-PVR/TIVO  
REALISTIC  
RUNCO  
049  
Manufacturer  
DISH  
Codes  
122  
122  
108 117  
117 118  
122  
090 108 117  
109  
127  
SANYO  
075  
ECHOSTAR  
HUGHES  
HUMAX  
JVC  
PHILIPS  
RCA  
REPLAY NETWORKS  
SONY  
TIVO  
SHARP  
013 152  
053 110  
113  
SONY  
TECHNICS  
THETA DIGITAL  
TOSHIBA  
YAMAHA  
032  
106 152  
043 129  
075  
104 105  
090 117 118  
117  
TOSHIBA  
PHONO  
Manufacturer  
JVC  
Codes  
004  
LIGHT  
KENWOOD  
PIONEER  
YAMAHA  
005  
003  
001 002  
Manufacturer  
Codes  
LITE-TOUCH  
LUTRON  
X-10  
208 212  
077 158 159  
093 183  
C-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
SAT  
TAPE  
Manufacturer  
Codes  
Manufacturer  
AIWA  
Codes  
015 071 100 114  
006 008 024 027 036  
105 227 229  
064  
CABLEVISION/VOOM  
DIRECTV  
148  
173  
CARVER  
DENON  
FISHER  
ECHOSTAR/DISH  
EXPRESSVU  
GENERAL ELECTRIC  
GENERAL INSTRUMENT 148  
GOI  
HITACHI  
HTS  
HUGHES  
JVC  
122 167 168  
122  
106 150 151  
GOLDSTAR  
HARMAN KARDON  
JVC  
KENWOOD  
LINN  
LUXMAN  
MAGNAVOX  
MARANTZ  
MCINTOSH  
MITSUBISHI  
NAD  
NAKAMICHI  
ONKYO  
OPTIMUS  
PANASONIC  
PHILIPS  
PIONEER  
QUASAR  
SANSUI  
011  
233  
106 116 239 240  
005 013 023 026 064 145 146 181 190  
124  
035 137 139  
027  
014 027 056 065 087  
238  
242 243  
029 048  
025 244 245  
002 012 016 017 018 019 115  
026 054 055  
007 010 032 088 195  
027 087  
003 039 047 050 066 098 222  
007 088  
027 113 119 224  
026 057 131 175 181  
004 028 030 033 034 038  
020 022 052 084 089  
009 059 212  
007 010 076 088 109 122 193  
112  
106  
122  
139 140  
122  
068 108 117 154 161 162 165 166  
122  
170  
136  
136  
068 154  
148  
148  
LG  
MAGNAVOX  
MEMOREX  
MITSUBISHI  
MOTOROLA  
NEXT LEVEL  
PANASONIC  
PANSAT  
PAYSAT  
142 160  
172  
136  
PHILIPS  
068 108 117 136 152 153 154 156  
106 150 151  
148  
106 150 151  
123 155 163 169 175  
164  
103  
148  
PROSCAN  
RADIO SHACK  
RCA  
SAMSUNG  
SKY  
SHARP  
SHERWOOD  
SONY  
TEAC  
SONY  
TECHNICS  
TOSHIBA  
VICTOR  
STAR CHOICE  
TOSHIBA  
UNIDEN  
ZENITH  
068 127 154 157 158  
136  
159  
YAMAHA  
021 026 031 040 067  
C-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
TV  
TV  
Manufacturer  
Codes  
072 081 160 161  
Manufacturer  
Codes  
ADMIRAL  
ADVENT  
AKAI  
EIKI  
187  
247  
ELECTROHOME  
EMERSON  
024 076 143 196  
146 197 248  
004 005 028 043 047 048 050 051 076 096 143 151  
A MARK  
112 143  
153 154 155 197  
AMPRO  
073 157 167 183  
EPSON  
ESA  
324  
323  
AMSTRAD  
ANAM  
052  
043 054 056 080 112 131  
FISHER  
FUJITSU  
FUNAI  
007 057  
198 246 346  
028 043  
AOC  
004 058 112 197  
APEX DIGITAL  
AUDIOVOX  
BARCO  
006 310  
FUTURETECH  
GATEWAY  
GE  
043  
076 273  
242 268  
233  
004 008 009 034 056 073 074 091 130 144 155 157 160  
BLAUPUNKT  
BROKSONIC  
CAIRN  
088  
161 165 183 197  
238  
GOLDSTAR  
HALL MARK  
HANNSPREE  
HITACHI  
HP  
004 102 106 112 113 116 119 127 143  
201  
004  
CANDLE  
CAPEHART  
CETRONIC  
CITIZEN  
002 003 004 197  
381  
058  
004 009 010 011 012 023 072 075 143 158 163 166  
043  
316 327 378  
002 003 004 043 101 103 143 197  
HYUNDAI  
INFINITY  
INFOCUS  
INSIGNIA  
JBL  
337 338  
CLASSIC  
043  
164  
CONCERTO  
CONTEC  
CORONADO  
CRAIG  
004  
230 330 333  
043 050 051  
350  
143  
164  
043 054  
JCPENNEY  
JENSEN  
JVC  
004 008 009 024 030 065 101 143 156 160 197  
CROWN  
CURTIS MATHES  
CXC  
043 143  
013  
004 101 143 197  
034 038 070 083 145 199 210 240 241  
043  
KEC  
043  
DAEWOO  
DAYTRON  
DELL  
004 016 043 044 076 103 114 125 127 143  
KENWOOD  
KLOSS  
070 197  
004 143  
319 320 321  
235 345  
177 257  
043  
002 059  
KMC  
143  
DREAMVISION  
DWIN  
KTV  
043 143 154 197  
LG  
004 102 106 112 113 116 119 127 143 243 284 363 365  
072  
DYNASTY  
DYNATECH  
LODGENET  
062  
C-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
TV  
TV  
Manufacturer  
Codes  
Manufacturer  
Codes  
004 019 043 127 143  
LOEWE  
LOGIK  
164  
072  
004  
RADIO SHACK  
RCA  
004 023 024 056 065 074 144 152 156 160 161 165 197  
LUXMAN  
LXI  
333  
007 015 052 081 160 164 166  
REALISTIC  
ROCTEC  
RUNCO  
007 019 043 047  
MAGNAVOX  
003 004 022 059 060 061 063 064 094 127 160 164 197  
186  
226 239 273  
073 157 168 169 178 179 180 181 182 183 340  
MARANTZ  
MATSUI  
MAXENT  
MEMOREX  
METZ  
164 184 197  
SAMPO  
004 058 197 202  
164  
SAMSUNG  
SANYO  
004 050 089 101 105 127 143 160 228 229 258  
242  
007 020 053 057 082 166 187  
004 007 072  
SCEPTRE  
SCOTT  
276  
088  
004 028 043 048 143  
MGA  
004 024 028 042 197  
SEARS  
004 007 015 028 030 057 082 094 143 160 165 166  
MINERVA  
MITSUBISHI  
MTC  
088  
SELECO  
189 200 205 227  
004 024 028 040 042 109 124 146 191  
SHARP  
004 014 019 022 028 029 081 143 170 175 251  
004 062 101 197  
SIEMENS  
SIGNATURE  
SIM2  
088  
NAD  
015 025  
072  
NEC  
016 019 024 040 056 130 132 134 197 236 237 262 272  
189 200 205 227  
NIKEI  
043  
SOLE  
231 232  
NUVISION  
ONKING  
ONWA  
351  
SONY  
070 085 126 139 147 185 194 213 277 279  
043  
SOUNDESIGN  
SPECTRICON  
SSS  
003 004 028 043  
043  
112  
OPTOMA  
OPTONICA  
ORION  
265 270  
004 043  
019 081  
SUPRE MACY  
SVA  
002  
096  
328  
PANASONIC  
PHILCO  
PHILIPS  
034 056 080 092 164 208  
003 004 024 056 059 060 063 064 164 197  
003 004 005 038 059 093 127 164 184 197 206 239 259  
018 023 025 116 135 190 197 234 335  
138 268 328 353 354 356 388  
004 143  
SYLVANIA  
SYNTAX OLEVIA  
TANDY  
003 044 059 060 063 064 127 160 164 197  
376  
081  
PIONEER  
POLAROID  
PORTLAND  
PROSCAN  
PROTON  
QUASAR  
TATUNG  
TECHNICS  
TECHWOOD  
056 062  
034 080  
004  
144 160 161 165 167  
TEKNIKA  
TELEFUNKEN  
002 003 004 024 028 043 072 101 143  
037 046 086 087  
004 058 131 143 171 173 193  
034 056 092  
TELERENT  
072  
C-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
TV  
VCR  
Manufacturer  
Codes  
Manufacturer  
DBX  
Codes  
012 023 039 043  
034 053  
059  
006 017 025 027 029 031 034 035 036 037 046 101 116  
129 131 138 153 162  
003 008 009 010  
034  
031 063 072 107 109 144 147  
040 115 132 136 155  
TERA  
172  
004  
DYNATECH  
ELECTROHOME  
EMERSON  
TMK  
TOSHIBA  
TOTEVISION  
UNIVERSAL  
VIDEO CONCEPTS  
VIDIKRON  
VIDTECH  
VIEWSONIC  
VIZIO  
007 015 030 040 062 101 138 325  
143  
008 009  
FISHER  
FUNAI  
GE  
GO VIDEO  
GOLDSTAR  
HARMAN KARDON  
HITACHI  
INSTANTREPLAY  
JCL  
146  
174 184 188 192 340  
004  
012 013 020 101 106 114 123  
012 045  
004 013 018 026 034 043 063 137 150 160  
031  
242  
386 387  
WARDS  
004 008 009 019 028 034 060 061 063 064 072 074 143  
164  
031  
JCPENNY  
JENSEN  
JVC  
KENWOOD  
LG  
LLOYD  
012 013 015 040 066 101  
043  
012 031 043 048 050 055 060 130 150 152 166  
014 034 047 048  
012 013 020 101 106 114 123  
034  
003 009 017 034 106  
040  
WESTING HOUSE  
WINBOOK  
YAMAHA  
YORK  
076 280  
339  
004 197  
004  
YUPITERU  
ZENITH  
043  
072 073 095 103 157 183 243 284  
112  
LXI  
MAGIN  
ZONDA  
MAGNAVOX  
031 034 041 067 068 156 164  
MARANTZ  
012 031 067 069 156  
VCR  
Manufacturer  
AIWA  
MARTA  
MATSUI  
101  
027 030  
Codes  
034 161  
MEI  
031  
AKAI  
AMPRO  
ANAM  
AUDIO DYNAMICS  
BROOKSONIC  
CANON  
016 043 046 124 125 142 146  
072  
031  
012 023 039 043  
035 037 129  
028 031  
MEMOREX  
MGA  
003 010 014 031 034 053 072 101 102 134 139  
045 046 059  
MINOLTA  
MITSUBISHI  
MTC  
013 020  
013 020 045 046 049 051 059 061 142 151 168  
034 040  
CAPEHART  
CRAIG  
CURTIS MATHES  
DAEWOO  
DAYTRON  
108  
003 040 135  
031 041  
005 007 010 065 108 110 111 112 116 117 119  
108  
MULTITECH  
NEC  
024 034  
012 023 039 043 048  
043  
NORDMENDE  
OPTONICA  
053 054  
C-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix C  
VCR  
VCR  
Manufacturer  
Codes  
Manufacturer  
Codes  
031 070  
ORION  
025  
TECHNICS  
TEKNIKA  
PANASONIC  
PENTAX  
PHILCO  
PHILIPS  
066 070 074 083 133 140 145 157 163 167  
019 031 034 101  
013 020 031 063  
THOMAS  
034  
006  
031 034 067  
TMK  
031 034 054 067 071 101 156  
TOSHIBA  
008 013 042 047 059 079 081 082 112 131  
PILOT  
101  
TOTEVISION  
UNITECH  
040 101  
PIONEER  
PORTLAND  
PULSAR  
013 021 048  
040  
108  
VECTOR RESEARCH  
VICTOR  
012  
072  
048  
QUARTZ  
QUASAR  
RADIO SHACK  
RCA  
002 014  
VIDEO CONCEPTS  
VIDEOSONIC  
WARDS  
012 034 046 141  
066 075 145  
040  
123  
003 013 017 024 031 034 040 053 054 131  
012 034 039 043  
013 020 034 040 041 107 109 140 144 145 147 158  
YAMAHA  
REALISTIC  
RICO  
003 008 010 014 031 034 040 053 054 101  
ZENITH  
034 048 056 058 072 080 101  
058  
VCR-TV/VCR Combos  
RUNCO  
SALORA  
SAMSUNG  
SANSUI  
148  
014  
DAEWOO  
EMERSON  
FUNAI  
005 117  
153  
034  
032 040 066 102 104 107 109 112 113 115 120 122 125  
022 043 048 135  
GOLDSTAR  
HITACHI  
JCPENNEY  
LG  
101 123  
034  
101  
101 123  
034  
SANYO  
SCOTT  
003 007 010 014 102 134  
017 037 112 129 131  
SEARS  
003 008 009 010 013 014 081 101 017 073 112  
SHARP  
031 054 149 159 165  
LLOYD  
SHINTOM  
SIGNATURE  
SONY  
024  
MAGNAVOX  
MEMOREX  
PANASONIC  
PHILIPS  
RADIO SHACK  
RCA  
SEARS  
SONY  
SYLVANIA  
SYMPHONIC  
THOMAS  
ZENITH  
034 067  
101  
070 167  
034 067  
123  
034  
101  
057 154  
067  
034  
034  
003 031 052 056 057 058 076 077 078 149 154  
SOUNDESIGN  
STS  
034  
013  
SYLVANIA  
SYMPHONIC  
TANDY  
031 034 059 067  
034  
010 034  
039 043  
034 039 043  
TATUNG  
TEAC  
034  
034  
C-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Lexicon  
AUX  
Manufacturer  
AUX  
Manufacturer  
Codes  
Codes  
POLKAUDIO  
RUSSOUND  
SCIENTIFIC ATLANTA  
SIMA  
162  
081  
3M  
152  
164  
401  
155  
AIWA  
APPLE  
ARCHER  
156 163  
082  
SOLO ELECTRONICS  
SOMFY  
207  
AURORA MULTIMEDIA 220  
078 079  
AUTON  
191  
SONY  
164 165 166 261 262  
BOSE  
409  
STARCOM  
153  
CELADON  
CRESTRON  
DELL  
221  
TURBOSCAN  
VELODYNE  
XANTECH  
167  
213 214 215 216 217 218  
203  
261 262  
156  
168 169 170 171 172 188 189  
DMX  
DRAPER SCREEN  
DREAMVISION  
DWIN  
204  
AUX-Media PC Controls  
097  
080 253  
206  
DELL  
261 262  
261 262  
294 295  
261 262  
297  
EVERQUEST  
EXTRON  
GATEWAY  
HAUPPAUGE  
HP  
151  
FAROUDJA  
FUJI  
184  
209  
KEYSPAN  
SONY  
GATEWAY  
HAUPPAUGE  
HP  
261 262  
294 295  
261 262  
219  
261 262  
261 262  
261 262  
TOSHIBA  
WINBOOK  
HUNTERDOUGLAS  
JERROLD  
JVC  
153  
AUX-XBox Controls  
185  
MICROSOFT/XBOX  
107 408  
KENSINGTON  
KENWOOD  
KEYSPAN  
MAKITA  
406  
185  
AUX-iPod Controls  
297  
APPLE/iPod  
BOSE  
401  
409  
406  
186 201  
107 408  
205  
MICROSOFT  
MINDPATH  
NILES  
KENSINGTON  
160 187  
161  
NSM  
PIANO DISC PLUS  
085  
C-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D
Appendix  
Installation Worksheet ..............................................................D-2  
3-Digit Preprogrammed Codes Worksheet .................................D-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix D  
Lexicon  
INSTALLATION WORKSHEET  
INPUT SETUP  
HD  
DVD GAME SAT CABLE DVR  
CD  
DOCK  
PC  
TUNER AUX1 AUX2  
NAME  
VIDEO IN  
V-PROCESS  
VIDEO OUT  
HDMI LINK  
DIG AUDIO  
NONE  
USB  
NONE  
ANLG AUDIO  
DOCK NONE TUNER  
N/A N/A N/A  
DIG/ANLG AUTO  
MODE FAMILY**  
MODE**  
DEFAULT SUR**  
A/D SAMPLE RATE  
A/V SYNC DELAY  
TRIGGER 2  
ZONE2 OUT**  
ADVANCED VIDEO  
INPUT TYPE  
SHARPNESS  
NOISE REDUCTION  
X-COLOR SUPPRESS  
DCDi INTERPOL  
FILM DETECTION  
FILM EDIT DETECTION  
FLESHTONE NR  
D-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
RV-5  
Appendix D  
INPUT SETUP  
HD  
DVD GAME SAT CABLE DVR  
CD  
DOCK  
PC  
TUNER AUX1 AUX2  
ADVANCED VIDEO (CONTINUED)  
COMPNT ENHANCE  
BRIGHTNESS  
CONTRAST  
COLOR  
SPEAKER SETUP  
AUTO  
SETTING  
**  
SUB/  
LFE LPF LFE HPF  
SUB 1 SUB 2  
SUB/  
FRONT  
LEFT  
FRONT  
RIGHT  
SIDE  
SIDE  
REAR  
LEFT  
REAR  
RIGHT  
CENTER  
LEFT RIGHT  
REAR AMP**: _______  
CROSS-OVER POINTS**  
DISTANCES (UNITS: ___)**  
OUTPUT LEVELS  
“ALL” INPUT**  
HD INPUT  
DVD INPUT  
GAME INPUT  
SAT INPUT  
CABLE INPUT  
DVR INPUT  
CD INPUT  
DOCK INPUT  
PC INPUT  
TUNER INPUT  
AUX 1 INPUT  
AUX 2 INPUT  
D-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix D  
Lexicon  
SURROUND CONFIGURATION  
NO YES  
LOGIC 7 DEFAULT**  
AUDIO CONTROLS  
AUTO EQ**  
SETTING  
DTS**  
DTS 96/24  
DTS + NEO:6  
DTS-ES MATRIX  
DTS-ES DISCRETE  
LOGIC 7  
ACTIVE EQ PRESET**  
EQ ADJUST/HF SHELF**  
TONE CONTROLS  
BASS  
STEREO DOWN MIX  
DOLBY PLII  
TREBLE  
DOLBY 2.0**  
VIDEO CONTROLS  
4:3 IN >16:9 DISPLAY**  
DOLBY PLIIx  
DOLBY VIRTUAL  
LOGIC 7  
DOLBY CONFIG  
CENTER WIDTH  
DIMENSION  
PANORAMA  
PLII**  
PLIIx**  
DOLBY MULTI-CHANNEL** DOLBY VIRTUAL  
LOGIC 7  
STEREO DOWN MIX  
PCM 44.1/48 kHz**  
LOGIC 7  
NIGHT  
DOLBY PLII  
DOLBY PLIIx  
DOLBY VIRTUAL  
DTS NEO:6  
HALL  
DISPLAY SETUP**  
CONNECTION  
SETTING  
HDMI AUDIO OUT  
OSD: 2-LINE OSD  
5/7 CH STEREO  
LOGIC 7  
OSD: MENU TIME OUT  
F/P DISPLAY: BRIGHTNESS  
F/P DISPLAY: TIME OUT  
PCM 96 kHz**  
DOLBY PLII  
DOLBY PLIIx  
DTS NEO:6  
5/7 CH STEREO  
D-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Appendix D  
R/P CONNECTIONS  
ANALOG AUDIO  
DIGITAL AUDIO  
ANALOG VIDEO  
DIGITAL VIDEO  
HD INPUT  
DVD INPUT  
GAME INPUT  
SAT INPUT  
CABLE INPUT  
DVR INPUT  
CD INPUT  
DOCK INPUT  
PC INPUT  
DOCK  
NONE  
TUNER  
NONE  
USB  
TUNER INPUT  
AUX 1 INPUT  
AUX 2 INPUT  
NONE  
TUNER  
PRESET  
FREQ /  
BAND  
TUNER  
PRESET  
FREQ /  
BAND  
TUNER  
PRESET  
FREQ /  
BAND  
TUNER  
PRESET  
FREQ /  
BAND  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
D-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D  
Lexicon  
3-DIGIT PRE-PROGRAMMED CODES WORKSHEET  
COMPONENT  
MANUFACTURER  
CODE(S) USED  
AUDIO  
DVD  
CD  
SAT  
TV  
VCR  
CABLE  
AUX  
LIGHT  
TAPE  
PHONO  
TV2  
VCR2  
DVR  
LDP  
XM RADIO  
IPOD  
X-BOX  
D-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Index  
AUDIO STATUS menu, 4-4  
digital audio input setup, 3-16  
HDMI AUDIO OUT parameter, 3-3  
rear panel connectors, 2-6  
Numerics  
D
2-channel listening modes, 3-26  
2-Line OSD parameter, 3-3  
5.1-channel direct inputs, 3-29  
5-channel listening modes, 3-26  
7.1-channel direct inputs, 3-29  
7-channel listening modes, 3-26  
DCDi INTERPOL parameter, 3-21  
Declaration of Conformity, A-4  
default video source settings, 3-21  
DIG AUDIO parameter, 3-16  
DIG/ANLG AUTO parameter, 3-17  
DIMENSION parameter, 3-32  
dock input  
TONE CONTROLS parameter, 4-3  
AUTO SETTINGS parameter, 3-9  
autocalibration  
AUTO SETTINGS parameter, 3-9  
EQ PRESET parameter, 4-2  
FULL AUTOCAL menu, 3-7  
MANUAL setup menu, 3-6, 3-9  
microphone input connector, 2-6  
SEMI AUTOCAL menu, 3-6  
SPEAKER/EQ SETUP menu, 3-5  
A
2-line display characteristics, 5-7  
charging the iPod, 5-9  
connecting to the RV-5, 5-6  
controlling the iPod, 5-8  
DOCK AUTO POWER parameter, 3-33  
Dock Functionality, 5-6  
A/D SAMPLE RATE parameter, 3-18  
A/V SYNC DELAY parameter, 3-18  
advanced video  
BRIGHTNESS parameter, 3-22  
COLOR parameter, 3-22  
COMPONENT ENHANCE parameter, 3-22  
CONTRAST parameter, 3-22  
DCDi INTERPOL parameter, 3-21  
FILM DETECTION parameter, 3-21  
FILM EDIT DETECT parameter, 3-22  
FLESHTONE NR parameter, 3-22  
INPUT TYPE parameter, 3-20  
NOISE REDUCTION parameter, 3-21  
SHARPNESS parameter, 3-20  
X-COLOR SUPPRESS parameter, 3-21  
ADVANCED VIDEO menu, 3-18, 3-20  
ALL input parameter selection, 3-12  
AM/FM radio tuner, 5-2  
front panel controls, 5-8  
rear panel connector, 2-8  
remote control, 5-8  
B
BASS parameter, 4-3  
battery installation, 1-4  
BRIGHTNESS parameter, 3-4, 3-22  
documentation conventions, 1-ii  
Dolby  
Dolby Digital modes, 3-25  
DTS + DOLBY modes, 3-23  
listening modes descriptions, 3-27  
DOLGY  
C
CAL NOISE parameter, D-2–D-3  
CENTER WIDTH parameter, 3-32  
COLOR parameter, 3-22  
command matrix, 2-12  
amplifier  
configuration menu, 3-2  
COMPONENT ENHANCE parameter, 3-22  
component rear panel connectors, 2-7  
CONTRAST parameter, 3-22  
cross-color interference, 3-21  
Customizing input names, 3-15  
making connections, 2-8  
output connectors, 2-7  
DOWNMIX parameter selection, 3-18  
DSP listening modes descriptions, 3-28  
DTS  
utilizing spare channels, 2-8  
audio  
DTS + DOLBY modes, 3-23  
DTS modes, 3-26  
listening modes descriptions, 3-27  
analog audio input setup, 3-17  
AUDIO CONTROLS menu, 4-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Lexicon  
navigation, 2-10  
SELECT button, 2-10  
SETUP menu, 3-2, B-3  
E
L
EQ ADJUST parameter, 4-3  
EQ PRESET parameter, 4-2  
listening modes, 3-23  
5.1-channel direct inputs, 3-29  
7.1-channel direct inputs, 3-29  
analog modes, 3-26  
available listening modes, 3-24  
descriptions, 3-27  
DOLBY CONFIG menu, 3-2  
Dolby Digital modes, 3-25  
DSP listening modes, 3-28  
DTS + DOLBY modes, 3-23  
DTS modes, 3-26  
LOGIC 7 DEFAULT parameter, 3-31  
SPEAKER/EQ SETUP menu, 3-2, B-5  
VIDEO CONTROLS menu, B-2  
MENU TIME OUT parameter, 3-4  
microphone, 3-6  
F
favorite channel  
MODE buttons, 2-4  
FILM DETECTION parameter, 3-21  
FILM EDIT DETECT parameter, 3-22  
FLESHTONE NR parameter, 3-22  
front panel  
MODE FAMILY parameter, 3-17  
MUTE button, 2-4  
MUTE LEVELS menu, 3-2, 3-33  
front panel display  
BRIGHTNESS parameter, 3-4  
TIME OUT parameter, 3-4  
FULL AUTOCAL menu, 3-7  
SURROUND CONFIG menu, 3-2  
surround configuration menu, 3-30  
Logic 7  
N
NAME parameter, 3-14  
NOISE REDUCTION parameter, 3-21  
listening modes descriptions, 3-27  
surround configuration menu, 3-30  
H
HDMI AUDIO OUT parameter, 3-3  
HDMI connectors, 2-7  
HF SHELF parameter, 4-3  
O
M
OSD (On-Screen Display), 3-3  
MENU TIME OUT parameter, 3-4  
OUTPUT LEVELS menu, 3-12  
Main Zone  
input selection buttons, 2-3  
INPUT SETUP menu, 3-2  
mute levels paramater, 3-33  
OFF button, 2-4  
I
P
input selection buttons, 2-3  
INPUT setup parameter, 3-14  
INPUT TYPE parameter, 3-20  
installation considerations, 1-4  
installation worksheet, 2  
maintenance, 6-12  
MANUAL setup menu, 3-6, 3-9  
menu  
PANORAMA parameter, 3-32  
PC input  
controls, 5-4  
setting up to play, 5-4  
USB connector, 2-6  
AUDIO CONTROLS menu, 4-2, B-2  
DISPLAY SETUP menu, 3-2–3-3, B-4  
DOLBY CONFIG menu, 3-2  
INPUT SETUP menu, 3-2, B-6  
menu arrows, 2-10, 2-12  
menu item selection, 2-10, 2-12  
menu options, 2-12  
IR (Infra Red)  
front panel receiver, 2-3  
rear panel connector, 2-7  
MUTE LEVELS menu, 3-2  
I-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RV-5  
Index  
power  
system volume setup, C-11  
transmitting icon, C-2  
using the code library, C-15  
restoring the factory defaults, 6-12  
routine maintenance, 6-12  
RS-232 connector, 2-6  
RV-5  
Standby button, 2-4  
SUB HPF parameter, 3-11  
SUB MODE parameter, 3-11  
SUB/LFE LPF parameter, 3-11  
SURROUND CONFIG menu, 3-2, 3-30  
AC input connector, 2-7  
POWER ON SETTINGS menu, 3-2, 3-33  
rear panel switch, 2-7  
standby button, 2-4  
preamplifier rear panel connectors, 2-6, 2-8  
R
Declaration of Conformity, A-4  
Product Registration, 1-2  
routine maintenance, 6-12  
rear panel  
connectors, 2-6–2-7  
remote control  
T
tone controls, 4-3  
BASS parameter, 4-3  
TREBLE parameter, 4-3  
TREBLE parameter, 4-3  
trigger  
What’s in the Box, 1-3  
RV-5 error messages, 6-7  
autocal errors, 6-8  
adjusting the touch screen contrast, C-7  
advanced customizing tools, C-6  
backlight time out, C-7  
battery installation, 1-4  
video errors, 6-7  
buttons overview, 2-11  
output connectors, 2-6  
troubleshooting, 6-2  
tuner  
S
command matrix, 2-12–2-16  
customizing the touch screen, C-7  
erasing commands, C-13  
favorite channel access, C-9  
favorite channel setup, C-9  
LCD display overview, 2-11  
lock feature, C-6  
safety instructions, 1-ii  
SELECT button, 2-10  
SEMI AUTOCAL menu, 3-6  
SHARPNESS parameter, 3-20  
SPEAKER/EQ SETUP menu, 3-5  
speakers  
activation & display, 5-2  
AM/FM radio tuner, 5-2  
antenna connectors, 2-8  
control button overview, 2-3  
controls, 5-3  
crossover setup, 3-10  
FULL AUTOCAL menu, 3-7  
MANUAL setup menu, 3-6, 3-9  
manual TEST TONE, 3-12  
output levels INPUT parameter, 3-12  
OUTPUT LEVELS menu, 3-12  
SEMI AUTOCAL menu, 3-6  
SPEAKER DISTANCES menu, 3-11  
SPEAKER/EQ SETUP menu, 3-2, 3-5  
SPEAKERS manual setup menu, 3-10  
SUB HPF parameter, 3-11  
SUB MODE parameter, 3-11  
SUB/LFE LPF parameter, 3-11  
macro setup, C-10  
operation considerations, 2-9  
optional RF-1 receiver, C-14  
pre-programmed codes, C-3  
pre-programmed codes worksheet, D-6  
programming, C-2  
punch through commands, C-11  
recall pre-programming, C-4  
restoring factory default settings, C-14  
U
I-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Lexicon  
V
video  
ADVANCED VIDEO menu, 3-18, 3-20  
default video source settings, 3-21  
rear panel connectors, 2-7  
VIDEO IN setup parameter, 3-15  
VIDEO OUT parameter, 3-16  
video resolutions table, 6-10  
VIDEO STATUS menu, 4-4  
V-PROCESS parameter, 3-15  
volume  
adjust Main Zone level, 2-3  
adjust Zone 2 level, 2-3  
MUTE LEVELS menu, 3-33  
V-PROCESS parameter, 3-15  
X
X-COLOR SUPPRESS parameter, 3-21  
Z
Zone 2  
input selection buttons, 2-3  
INPUT SETUP menu, 3-2  
mute levels paramater, 3-33  
OFF button, 2-4  
rear panel connectors, 2-6  
ZONE-2 OUT parameter, 3-18  
I-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
Harman Specialty Group offers the following warranty  
on this product:  
4. Damage to a unit that has been altered, or on  
which the serial number has been defaced, modi-  
fied, or removed.  
What are the Limitations of Implied  
Warranties?  
Any implied warranties, including warranties of mer-  
chantability and fitness for a particular purpose, are  
limited in duration to the length of this warranty.  
What is the Duration of this Warranty?  
What Expenses will Harman Specialty Group  
Assume?  
Harman Specialty Group will pay all labor and material  
expenses for covered items. Payment of shipping  
charges is discussed in the next section of the warranty.  
This warranty will remain in effect for three (3) years  
from the original date of purchase.  
What Certain Damages are Excluded?  
Harman Specialty Group’s liability for a defective  
product is limited to repair or replacement of that  
product, at our option. Harman Specialty Group shall  
not be liable for damages based on inconvenience;  
loss of use of the product; loss of time; interrupted  
operation; commercial loss; or any other damages,  
whether incidental, consequential, or otherwise.  
Who is Covered?  
This warranty may be enforced by the original pur-  
chaser and subsequent owners during the warranty  
period, provided the original dated sales receipt or  
other proof of warranty coverage is presented at time  
of service.  
How is Service Obtained?  
When this product needs service, write, telephone, or  
fax Harman Specialty Group to request information  
about where the unit should be taken or sent. When  
making a written request, please include your name,  
complete address, and daytime telephone number;  
the product model and serial numbers; and a descrip-  
tion of the problem. Do not return the unit to Harman  
Specialty Group without prior authorization.  
What is Covered?  
How do State Laws Relate to this Warranty?  
This warranty covers all defects in material and  
workmanship on this product, except as specified  
below. The following are not covered:  
Some states do not allow limitations on the duration of  
implied warranties and/or the exclusion or limitation  
of incidental or consequential damages. As such, the  
above limitations may not apply.  
1. Damage resulting from:  
A. Accident, misuse, abuse, or neglect.  
B. Failure to follow instructions contained in the  
user guide.  
C. Repair or attempted repair unauthorized by  
Harman Specialty Group.  
When Shipping a Product for Service . . .  
This warranty is not enforceable outside of North  
America. This warranty provides specific legal rights.  
Additional rights may be provided by some states.  
1. Pay any initial shipping charges, which are the  
responsibility of the owner. If necessary repairs are  
covered by this warranty, Harman Specialty  
Group will pay return shipping charges to any  
destination in the United States using the carrier  
of our choice.  
D. Failure to perform recommended periodic  
maintenance.  
2. Causes other than product defects, including lack  
of skill, competence, or experience on the part of  
the owner.  
3. Damage occurring during any shipment of this  
product. Claims for shipping damages must be  
made with the carrier.  
2. Pack the unit securely. Package insurance is  
strongly recommended.  
3. Include a copy of the original dated sales receipt.  
(A copy of the original dated sales receipt must be  
presented whenever warranty service is required.)  
4. Do not include accessories such as power cords or  
user guides unless instructed to do so.  
Customer Service  
Tel 781-280-0300  
Fax 781-280-0495 (Sales)  
Fax 781-280-0499 (Service)  
Harman Specialty Group  
3 Oak Park Drive  
Bedford, MA 01730-1413  
Tel 781-280-0300  
Fax 781-280-0490  
www.lexicon.com  
USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
!ª(ARMANª)NTERNATIONALª#OMPANY  
ꢅ /AK 0ARK $RIVE  
"EDFORD-! ꢊꢄꢇꢅꢊꢐꢄꢁꢄꢅ  
4EL  
&AX  
ꢇꢈꢄꢐꢂꢈꢊꢐꢊꢅꢊꢊ  
ꢇꢈꢄꢐꢂꢈꢊꢐꢊꢁꢉꢊ  
WWWꢑLEXICONꢑCOM  
#USTOMER 3ERVICE  
4ELEPHONEꢓ  
3ALES &AXꢓ  
ꢇꢈꢄꢐꢂꢈꢊꢐꢊꢅꢊꢊ  
ꢇꢈꢄꢐꢂꢈꢊꢐꢊꢁꢉꢃ  
ꢇꢈꢄꢐꢂꢈꢊꢐꢊꢁꢉꢉ  
3ERVICE &AXꢓ  
0RODUCT 3HIPMENTS  
ꢉꢊꢊ -IDDLESEX "LDGꢆ  
"ILLERICA-! ꢊꢄꢈꢂꢄꢐꢊꢊꢄꢇ  
0ART .Oꢇꢊꢐꢄꢈꢄꢁꢁ \ 2EV ꢊ \ ꢊꢆꢒꢊꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LevelOne Switch GSW 1675T User Manual
LG Electronics Blu ray Player BP120 User Manual
LG Electronics Car Video System W2600V User Manual
LG Electronics Cell Phone TD5130 User Manual
LG Electronics Cell Phone VX4500 User Manual
Magnavox Blu ray Player MBP5220F User Manual
Makita Microscope Magnifier BJN160 User Manual
Melissa Bread Maker 643 032 User Manual
Memorex MP3 Player MMP8570 User Manual
Meyer Spreader 62209 User Manual