User’s Guide
W2600V
Make sure to read Safety Precautions before using this product.
Keep the User's Guide (CD) in an accessible place for future reference.
See the attached label on the unit and show this information to your dealer
when asking for service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Precautions in installing the Product
Warning
Keep away from heat sources like electrical heaters, curdles or other open flames.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product on sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable when someone can trip over it.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire or product damage.
Do not add accessory that have not been designed for this display.
If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and
contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product.
- It can cause injury to humans, problems to the product and damage the display.
Keep out of reach of children and do not place toys near the product.
Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall.
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up.
Do not cover the product with cloth or other material (eg. plastic) while plugged in.
- The product can be deformed or fire can break out due to internal overheating inside the product.
Place the product on a flat and stable surface that is large enough to support the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no Electromagnetic Interference occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product on the floor.
- Small Children and others may trip over it.
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
When lifting or moving the product, do not hold it upside down while holding only the stand.
- This may cause the product to fall resulting in damage or injury.
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Make sure the panel faces forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the
service center for repair.
Do not place the product face down.
- This may damage the TFT-LCD screen.
Precautions in Using/Cleaning the Product
Warning
Do not attempt to disassemble, repair or modify the product yourself.
- Fire or electric shock can occur.
- Contact the service center for repair.
When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent
scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
Keep the product away from water.
- Fire or electric shock accident can occur.
Avoid high temperatures and humidity.
Do not put or store flammable substances near the product.
- There is a danger of explosion or fire.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
Keep proper distance from the product and rest from time-to-time.
- Your vision may be impaired if you look at the product too closely or fpr too long.
Set the appropriate resolution by referring to the User’s Guide.
- Your vision can be impaired.
Keep small accessories out of the reach of children.
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image
burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered
by the warranty on this product.
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only.
Too much moisture may cause staining.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Align the hooks on the Stand Body with the matching slots in the Stand Base.
3. Insert the hooks into slots.
Hook
Stand Body
Slot
Stand Base
Warning
The tape and locking pin may only be removed from those monitors equipped
with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
4. Attach the monitor to the Stand Base by turning the screw to the right.
Screw : Turn the screw by using the screw handle.
5. Lift and turn the monitor to face towards the front after the connection is
made to the female part of the cable you're attaching.
6. Take the screw out by turning to the left to separate the monitor and Stand
Base.
Im portant
This illustration depicts the general model of installation. Your monitor may differ
from the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product
may fall and get damaged or injure your foot.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚
Swivel Range : 350˚
Height Range : maximum 3.94 inches (100.0mm)
100.0mm
* Please be sure to
remove the Locking
pin to adjust the height.
Ergonomic
You do not need to replace the Locking pin after it is removed, to adjust its height.
It is recommended that in order to maintain an ergonomic and comfortable
viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Using the Computer
1. Make sure to turn off the computer and product.
2
1
Connect signal input cable
screw of the signal cable.
and power cord
in order, then tighten the
A
B
C
D
Connect DVI(Digital signal) Cable
Connect D-sub(Analog signal) Cable (PC)
Connect D-sub(Analog signal) Cable (Mac)
Connect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to
maintain standard compliance for the product.
Power Cord
Signal Cable
Varies according to model.
2
1
Wall-outlet type
PC
MAC
AV equipment
(Set-Top Box,
DVD, Video,
Video Game
Console)
PC
DVI-D(This feature is not
available in all countries.)
*HDMI is optimized on
the AV equipment.
Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin high
density (3 row) D-sub VGA connector on the
supplied cable to a 15 pin 2 row connector.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
2. Touch the power button on the front of panel to turn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
(Only to the D-sub signal cable input (RGB))
Power button
NOTE
'
Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals.
'AUTO/SET Function'? When you encounter problems such as blurry screen, blurred letters, screen flicker
or tilted screen while using the device or after changing screen resolution, touch the AUTO/SET function button
to improve resolution.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Connecting the USB(Universal Serial Bus) Cable
"USB (Universal Serial Bus)" is an innovation in connecting your different desktop peripherals
conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and
other peripherals to your display instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect a chain of up to 120 devices on a
single USB port; and you can “hot” plug (attach them while the computer is running) or unplug them while
maintaining the Plug and the Plug auto detection and configuration. This display has an integrated BUS-
powered USB hub, allowing up to 2 other USB devices to be attached it.
1. Connect the upstream port of the display to the downstream port of the USB compliant
PC or another hub using the USB cable. (Computer must have a USB port)
2. Connect the USB compliant peripherals to the downstream ports of the display.
USB downstream Port x (4)
Connect the cables from USB
compliant peripherals-such as
mouse, memory stick or USB hard disk, etc.
USB upstream Port x (1)
Connect to downstream connectors of desktop
or laptop computers. (However, the computer
must support USB and have the USB port.)
3. The monitor’s USB terminal supports USB 2.0 and High Speed cables.
High Speed
480Mbps
2.5W
Full Speed
12Mbps
2.5W
Low Speed
Data Rate
Power
1.5Mbps
2.5W
Consumption
(Max,each Port) (Max,each Port)
(Max,each Port)
NOTE
To activate the USB hub function, the display must be connected to a USB compliant
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of the connector at the cable
side matches the shape at the connecting side.
Even if the display is in a power saving mode, USB compliant devices will function
when they are connected the USB ports(both the upstream and downstream) of the
display.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
To arrange the cables
Connect the power cord and the signal cable as shown in the figure and then fix them
to the cable holders 1 and 2.
2. Please put the power cord and
1. Please insert the cable holder1
the signal cable in the cable holder 1.
into the hole.
Cable holder 1
3. Please put the power cord and the signal cable in the cable holder 2.
While pressing the bottom of cable holder 2 with one hand, pull the top of
it with the other hand as shown in the picture.
Pull
Press
Cable holder 2
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Front Panel Controls
Use this button to enter EZ ZOOMING, 4:3 IN WIDE,
PHOTO EFFECT, SOUND items, for more information,
refer to page 14 ~ 15.
Button
Use this button to enter On Screen Display Sub-menu to
adjust BRIGHTNESS directly.
Button
MENU Button
Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU button for several
seconds. The message "OSD LOCKED" appears.
You can unlock the OSD settings at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" appears.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Use these buttons to select or adjust functions in the On
Screen Display.
Buttons
For more information,
refer to page 22~23.
When two or more input signals are connected, you can
select the input signal (RGB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default input signal is RGB.
(SOURCE Hot key)
AUTO/SET
Button
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always touch the
AUTO/SET button before entering the On Screen Display
(OSD). (Only to the D-sub signal cable input (RGB))
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1920 x 1200
Power Button
(Power Indicator)
Use this button to turn the display on or off.
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Touch the MENU Button, then the main menu of the OSD appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, touch the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Touch the MENU Button once to return to the main menu to select another
function. Touch the MENU Button twice to exit from the OSD.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and
setting menus.
Main menu
Sub-menu
R
D
H
Reference
EZ ZOOMING
4"3 IN WIDE
To adjust the resolution
To adjust the image size
NORMAL
PHOTO
EFFECT
GAUSSIAN BLUR
SEPIA
To adjust screen color mode
MONOCHROME
To select or turn off the sound
SOUND
BRIGHTNESS
CONTRAST
GAMMA
PICTURE
To adjust the brightness, contrast and
gamma of the screen
To set offset level
**BLACK LEVEL
sRGB
COLOR
PRESET
6500K
9300K
To costomize the color of the screen
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
CLOCK
TRACKING
SETUP
To adjust the position of the screen
To improve the clarity and stability of the
screen
PHASE
SHARPNESS
LANGUAGE
HORIZONTAL
VERTICAL
OSD
POSITION
To costomize the screen status for a
user's operating environment
WHITE BALANCE
**OVERSCAN
POWER INDICATOR
FACTORY RESET
MOVIE
FLATRON
F-ENGINE
*INTERNET
**GAME
To select or customize desired image
settings
USER
*NORMAL
**STANDARD
*DEMO
**SPORTS
PIP ON/OFF
PIP
To set PIP
PIP POSITION
ꢀ
: Adjustable
R : RGB Input
D : DVI Input
H : HDMI Input
* : only for RGB/DVI Input
** : only for HDMI Input
NOTE
The order of icons may differ depending on the model (14~23).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
bottom of the monitor.
button on the left
M E N U : Exit
,
: Move
AUTO/SET : Select
Main menu
Description
To select the adjust the resolution.
When you select EZ ZOOMING in OSD, display
resolution goes one step down so characters and
images look bigger. When you select EZ ZOOMING
once again, it goes back to the original resolution.
EZ ZOOMING
* To use this function, you must install forteManager program.
For details, refer to the forteManager Installation Guide on the
CD-ROM.
* forteManager is not supported for HDMI input.
To select the image size of the screen.
WIDE
4:3
1:1
4:3 IN WIDE
• WIDE : Switch to full screen mode according to input
image signal.
• 4 : 3 : Change the image signal ratio into 4:3.
• 1 : 1 : Change the image signal size into the input
signal size.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Description
To select the color of the screen.
PHOTO EFFECT
• NORMAL :
The PhotoEffect function is disabled.
• GAUSSIAN BLUR :
This option is to add the effect to the screen that the
dark and sharp image becomes brighter and more
blurred.
• SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
• MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white, black,
gray colors.
NORMAL
SEPIA
MONOCHROME
GAUSSIAN BLUR
To set the buzzer sound.
Touch the AUTO/SET button from the OSD screen to
select or mute the sound (2 types of buzzer sounds),
and touch the MENU button to save.
SOUND
* The buzzer sound is generated only when you turn
on/off the power,
and MENU.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Touch the MENU Button, then the main menu of the OSD appears.
Main Menu
MENU
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button Tip
Sub-menus
Menu Name
Icons
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
RGB/DVI input
BRIGHTNESS
To adjust the brightness of the screen.
To adjust the contrast of the screen.
CONTRAST
GAMMA
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
HDMI input
You can set the offset level. If you select
'HIGH', the screen will be bright and if
you select ‘LOW’, the screen will be dark.
(only for HDMI input)
BLACK
LEVEL
* Offset? As the criteria for video signal, it is
the darkest screen the monitor can show.
M E N U : Exit
: Decrease
: Increase
AUTO/SET : Select another sub-menu
COLOR
• sRGB: Set the screen color to fit the
sRGB standard color
PRESET
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
RED
GREEN
BLUE
M E N U : Exit
: Decrease
: Increase
AUTO/SET : Select another sub-menu
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
HORIZONTAL
VERTICAL
To move image left and right.
To move image up and down.
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
CLOCK
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
SHARPNESS To adjust the clearness of the screen.
M E N U : Exit
: Decrease
: Increase
AUTO/SET : Select another sub-menu
19
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
SETUP
To choose the language in which the
control names are displayed.
LANGUAGE
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
RGB input
Activate this function when white and
black colors are present in the screen.
(only for RGB input)
HDMI input
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
OVERSCAN
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
M E N U : Exit
: Adjust
: Adjust
AUTO/SET : Select another
sub-menu
Restore all factory default settings except
"LANGUAGE."
FACTORY
RESET
Press the
,
buttons to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. The white balance function is
executed only for RGB input.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PIP
PIP ON/OFF
To select PIP on or off.
* It supports only for HDMI input in RGB
(D-sub analog signal) mode.
PIP ON/OFF
ON
* The combinations of main screen and
sub-screen (PIP) available are as shown
below:
Main screen
RGB
DVI
HDMI
Sub-screen (PIP)
RGB
MENU : Exit
X
X
O
X
X
X
X
X
X
: Adjust
: Adjust
DVI
AUTO/SET : Select another
sub-menu
HDMI
PIP POSITION Select the PIP display location. Every
time you touch the button, it will move
4
3
1
2
from to
,
,
. Every time you
1
press the button, it will move from
2
4
3
to
,
,
. You can use this menu to
select the PIP display location you want.
1
: Top left
2
: Bottom left
3
: Bottom right
4
: Top right
*It operates only when PIP is on.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
button on the left bottom
of the monitor. These features let you easily select the best desired image condition
optimized to the environment (ambient illumination, image types etc).
Active state
Inactive state
Menu Name
Icons
MENU : Exit
,
: Move
SET : Select
Sub-menu Name
When F-ENGINE is executed, two kinds of tone are displayed as shown in the image. The active state
is on the left and the inactive state is on the right side of the screen. Select the function you want and
press the [MENU] button to save the setting.
Main menu
Sub menu
Description
MOVIE
Select this when you are watching a video or
movie.
RGB/DVI input
INTERNET Select this when you are working on the
document (Word etc.)
HDMI input
GAME
Select this when you are playing a game.
RGB/DVI input
NORMAL Select this when you want to use the product in
the most general using environment.
HDMI input
STANDARD
Select this when you want to use the original
standard video.
* In the General (Standard) mode, the
is turned off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
RGB/DVI input
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard mode
on the left and video mode on the right so that the
consumers can check the difference after applying
the video mode.
HDMI input
SPORTS
USER
Select this when you watching general sports.
You can manually adjust brightness, ACE or RCM
(only for RGB/DVI input), HUE or SATURATION
(only for HDMI input).
You can save or restore the adjusted value even
when using a different environment.
To adjust the USER sub-menu function,
•
•
(Brightness) : Adjusts screen brightness.
press the AUTO/SET Button.
ACE(Adaptive Clarity Enhancer) : Selects the clarity mode.
Not applied
RGB/DVI input
Weak clarity and luminosity contrast.
Strong clarity and luminosity contrast.
•
RCM(Real Color Management) : Selects the color mode.
Not applied
Green enhance
Flesh tone
Color Enhance
HDMI input
•
•
HUE : Adjust the screen hue.
SATURATION : Adjust the screen saturation.
Select the
sub-menu using the AUTO/SET
button and save the YES value using the
buttons.
,
MENU : Exit
: Decrease
: Increase
: Select another sub-menu
AUTO/SET
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following before calling for service.
No image appears
ꢀ Is the power cord of the
•
Check and see if the power cord is connected
properly to the power outlet.
display connected?
ꢀ Is the power indicator
• Touch the Power button.
light on?
•
•
Adjust the brightness and the contrast.
ꢀ Is the power on and the
power indicator blue or
green?
ꢀ Is the power indicator
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
amber?
• Try to turn on the PC
.
•
•
This message appears when the signal from the
ꢀ Do you see an "OUT OF
RANGE" message on
the screen?
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
ꢀ Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
Do you see a "OSD LOCKED" message on the screen?
ꢀ
Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
ꢀ Display Position is
•
Touch the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
incorrect.
•
Touch the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
ꢀ On the screen
background, vertical
bars or stripes are
visible.
•
•
Touch the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
ꢀ Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10.
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter
problems such as blurred letters, blurry screen, cut-off screen display or tilted
screen.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer
.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
ꢀ The screen color is
•
•
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
mono or abnormal.
ꢀ The screen blinks.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Have you installed the display driver?
ꢀ
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
•
Make sure to check if the video card supports
Plug&Play function.
ꢀ
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Display
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
26 inches visible diagonal (64.868 cm)
0.2865 x 0.2865 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Sync Input
Video Input
Input Form
Separate Sync.
SOG (Sync On Green)
Digital(HDCP)
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital), HDMI
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
VESA 1920 x 1200 @60 Hz
VESA 1920 x 1200 @60 Hz
Resolution
Plug&Play
Recommend
DDC 2B
:
≤
≤
50W(Typ.), 65W(USB Full load)
1 W
1 W
Power
Consumption
On Mode
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
&Weight
Width
60.19 cm / 23.70 inches
60.19 cm / 23.70 inches
41.37 cm / 16.29 inches
Height 46.32 cm / 18.24 inches (Min)
56.32 cm / 22.17 inches (Max)
Depth 27.02 cm / 10.64 inches
8.10 cm / 3.19 inches
Weight(excl. packing)
10.6 kg (23.37 lbs)
-5˚~20˚
350˚
100 mm / 3.94 inches
Tilt
Swivel
Height
Range
Power Input
AC 100-240V~ 50/60Hz 1.2A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Stand Base
Power cord
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Standard
USB 2.0, Self-Power
Max 480 Mbps
USB
Data Rate
Power Consumption Max 2.5W x 4
NOTE
Information in this document is subject to change without notice.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Preset Modes (Resolution) - D-sub(Analog) / DVI(Digital) INPUT
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
VGA
VESA
VESA
VGA
640 x 480
640 x 480
720 x 480
720 x 400
800 x 600
59.940
75.000
59.901
70.156
60.317
75.000
60.004
75.029
75.000
59.870
74.893
60.020
75.025
60.000
59.883
60.454
59.950
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*17
31.469
37.500
35.162
31.500
37.879
46.875
48.363
60.023
67.500
47.776
60.289
63.981
79.976
75.000
64.674
65.290
74.038
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 768
1280 x 1024
1280 x 1024
1600 x 1200
1680 x 1050
1680 x 1050
1920 x 1200
*Recommend Mode
HDMI Vedio INPUT
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
Display Modes (Resolution)
1
2
3
4
5
6
7
8
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
480P
576P
720P
720P
1080i
1080i
1080P
1080P
60.00
50.00
50.00
60.00
50.00
60.00
50.00
60.00
Indicator
LED Color
MODE
On Mode
Sleep Mode
Off Mode
Blue
Amber
Off
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. After moving the product to face
downward, make sure to place it on
a soft cloth or a cushion to avoid
surface damage.
2. Separate the head and the stand
with the use of a screwdriver.
3. Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
is purchased. LG recommends that wall mounting
be performed by a qualified professional installer.
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most
computer stores.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Digitally yours
Download from Www.Somanuals.com. All Manuals Search And Download.
|