Meyer Spreader 62209 User Manual

Form 1-738 R

JULY, 2003

INSTALLATION a OPERATING

INSTRUCTION MANUAL

1.8 & 2.0 CU. YD. INSERT HOPPER SPREADER

with Replaceable conveyor Floor

PART NO.

CAPACITY

1.8 CU YD

2.0 CU YD

LENGTH

7 FT.

WEIGHT (EMPTY)

980 LBS.

62209 (STEEL)

62517 (STEEL)

8 FT.

1015 LBS.

62504 (STEEL)

SPINNER ASSEMBLY

62505 (STEEL)

SPINNER ASSEMBLY (EXT.)

INDEX

SAFETY ALERT ...............................................................................................................

SPREADER ASSEMBLY INSTRUCTIONS .......................................................................

ELECTRIC THROTTLE CONTROLS ................................................................................

CENTER HIGH MOUNT STOP LAMP ............................................................................... 10 - 11

HYDRAULICS ............................................................................................................... 12 - 13

SPREADER OPERATION ................................................................................................. 14 - 17

SPREADER MAINTENANCE............................................................................................ 18

SPREADER PARTS LISTS & EXPLODED VIEW

• HYDRAULIC MOTOR .................................................................................................... 19

• HYDRAULIC DRIVEN SPREADERS ............................................................................ 20 - 27

• ENGINE DRIVEN SPREADERS ................................................................................... 28 - 35

• DURST GEAR BOX ASSEMBLY.................................................................................... 36 - 37

• SUPERIOR GEARBOX ASSEMBLY .............................................................................. 38 - 39

• SPINNER ASSEMBLY

•• SHORT ............................................................................................ 40 - 41

•• INTERMEDIATE “NEW STANDARD EQUIPMENT” ...................... 42 - 43

•• EXTENDED ..................................................................................... 44 - 45

• ELECTRIC CONTROLS

•• HONDA ENGINE............................................................................. 46 - 47

•• BRIGGS & STRATTON ENGINE .................................................... 48 - 49

• CONTROL BOX ............................................................................................................. 50 - 51

• OPTIONAL COMPONENTS .......................................................................................... 52 - 53

• PARTS LIST SHIPPING CARTON ................................................................................ 53

NAME PLATE INFORMATION .......................................................................................... 54

WARRANTY INFORMATION............................................................................................. 55

WARRANTY REGISTRATION CARD................................................................................ 55

Meyer Products and Diamond Equipment reserves the right, under its continuing product improvement program, to change construction or design details,

specifications and prices without notice or without incurring any obligation.

Diamond Equipment

6 Angell Lane• Damariscotta, ME 04543-9720

Phone 563-2227(Area Code 207)

Meyer Products

18513 Euclid Ave. • Cleveland, Ohio 44112-1084

Phone 486-1313 (Area Code 216)

www.diamondplow.com • email [email protected]

www.meyerproducts.com• email [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND ASSEMBLY INSTRUCTIONS

INSTALLATION INSTRUCTIONS:

The 1.8 and 2.0 Series Spreaders can mount and store as a single unit and will mount on most medium,

heavy-duty/pick-up trucks as well as 1 ton trucks

WARNING

THE SPREADER UNIT MUST BE SECURELY FASTENED TO THE VEHICLE. FAILURE TO NOT

PROPERLY RESTRAIN THE UNIT COULD PERMIT THE UNIT TO BREAK FREE FROM THE TRUCK

AND CREATE A POTENTIAL FOR A LIFE THREATENING ACCIDENT.

DO NOT OVERLOAD THE VEHICLE. It is quite possible to overload the vehicle by improperly mounting or over

loading the spreader. This could result in dangerous stability and braking problems. Always consult and follow the

truck manufacturer’s instructions.

WARNING

BEFORE BEGINING ANY INSTALLATION ON THIS UNIT, disconnect the spreader battery negative cable if

already installed.

1. Place the Spreader in the rear of truck with the engine/hydraulic motor to the rear of the truck. Center the

spreader (side to side) in the truck. The spreader should extend past the rear of the outer most part of the truck

(i.e: truck bed, bumper) approximately 18 inches.

CAUTION

INSURE THAT THE SPREADER CANNOT TIP WHEN THE SPINNER ASSEMBLY IS ATTACHED

SPINNER ASSEMBLY

a. Raise engine shroud and prop it open with the support rod. (If engine driven model)

b. Slide the spinner frame assembly into the rear of the longitudinal with the spinner back plate toward the

rear.

c. Bolt the spinner to the longitudinals using the four (4) 3/8” x 1” bolts, 3/8” flange nuts and flatwashers from

hardware bag located on the spinner. Using one (1) 3/8” x 1” bolt, flatwashers and flange nut from hardware

bag, bolt the top portion of the spinner back plate to the engine plate.

d. Install roller chain between the gear box sprocket and the spinner sprocket.

Make sure sprockets are in line with each other. The roller chain is tightened first by loosening all four (4)

3/8” bolts on the back plate; then pull the entire bearing/shaft assembly in such a way to achieve the proper

amount of chain tension. Make sure the spinner shaft is straight up and down before

re-tightening.

2. Reposition the spreader in the truck, just short of making contact with the rearmost part of the truckbed,

bumper, pintle hook etc. Bolt the unit to the truck using a minimum of four (4) 1/2” - grade 5 bolts and

corresponding washers and locknuts.

The spreader is designed to sit flat on the bed of the truck, supported by the longitudinals/sides.

DO NOT SUPPORT THE SPREADER BY THE BODY JACKS ALONE!! UNIT IS NOT DESIGNED FOR

CHASSIS MOUNT APPLICATIONS!

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTIONAL HOLD-DOWN KIT

Part No. 62562 (00002-306-00)

ITEM

PART NUMBER

QTY.

DESCRIPTION

62602

04068-038-00

04048-504-02

04003-804-06

04003-801-11

04004-002-16

Ratchet/Strap

Bolt, 1/2” Eye

Locknut, 1/2-13 Esna ZP

Nut, 1/2-13 Hex ZP

Flatwasher, 3/4"

62807

20307

62604

62605

INSTALLATION INSTRUCTIONS

CAUTION

READ ALL THE INSTALLATION INSTRUCTIONS BEFORE STARTING

Before starting, verify that this mounting is acceptable to the vehicle manufacturer.

Attach the hold down at each corner of hopper as shown. Locate and drill four .531

(17/32”) diameter holes for eye-bolts in the truck bed (position may vary from that shown). Straps must be

positioned at opposing angles so that spreader cannot slide forward or rearward. Mount eye-bolts as

shown, with locknuts and flatwashers on the bottom side. Assemble ratchet/strap to eye-bolts. Tighten

hold downs evenly. Do not over tighten damage will result to the spreader or the truck.

Download from Www.Somanuals.com. All Manuals Search And Download.

ASSEMBLY INSTRUCTIONS

1. Install roller chain between the gear box sprocket and the spinner sprocket. Make sure sprockets are in line with

each other. The roller chain is tightened, first by loosening all four (4) 7/16" bolts on the back plate. Then, pull the

entire bearing bracket assembly in such a way to achieve the right amount of chain tension. Make sure spinner

shaft is straight up and down before retightening.

2. Electric Throttle: Go to page 8.

Manual Throttle: Installation or replacement with gasoline engine do the following: Attach "Z" end of throttle

cable to engine throttle. Anchor brass shoulder end to engine with hold down. Drill 1/2" hole in truck cab for

control end of cable. The throttle handle can be removed to put throttle cable through drill hole. DO NOT MAKE

SHARP BENDS OR KINK THROTTLE CABLE. Use rubber grommet, supplied, in hole that you just drilled to

protect cable. Do not mount throttle cable assembly to switch bracket yet; upcoming assembly instructions will

become more difficult if throttle cable is mounted now.

Refer to diagram "A" on page 6-7 for installation and part ordering.

3. Run the (2) conductor cable (#16), which leads from the soleniod (white lead), and the electric clutch (black

lead) through the same hole which you put your throttle cable through.

4. Wire-up (2) conductor cable (#16) to the control panel as Diagram "A" shows; making sure the white conductor

is connected to the lone terminal of the push button (#3) and the black conductor to the lone terminal of the on/

off button (#7). The red wire (#6) which is about 4 ft. long, must be connected into the vehicles electrical system

so that it provides power to switch bracket. Control panel will not function without this connection.

5. Find a convenient location for the control panel and drill (2) 13/32" holes on 3" hole centers. Before mounting,

you may want to mount throttle cable to control panel according to diagram "A." Using the 3/8" x 1" bolts,

lockwashers and nuts, mount panel securely.

6. When finished, make sure all wires are away from moving parts and lower engine shroud.

CAUTION!

Never operate machine with engine shroud in the upright position. Never climb into hopper while the engine is

operating. SERIOUS INJURY or DEATH MIGHT OCCUR.

WARNING

Consult vehicle manufacturer for acceptable mounting locations. Improperly mounting the control box could interfere

with air bag(s) and the other functions of the occupant protection systems, such as knee bolsters!

Before mounting, you may want to mount throttle cable to control panel according to Diagram “A”.

Using the 3/8” x 1” bolts, lockwashers and nuts, mount panel securely.

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE FOR

DIAGRAM "A"

ITEM

PART NO.

QTY.

DESCRIPTION

62116

61216

62047

62038

62042

61188

62043

62049

62805

92805

62040

62046

61179

61167

00001-598-00

00104-824-00

04640-004-00

04144-008-00

04616-013-00

04143-024-00

04616-032-00

04640-013-00

04638-040-06

04604-004-00

04638-039-04

04146-005-00

04138-017-00

Carton, Electrical Cab Controls

• Switch Bracket

• On/Off Plate

• Push Button Switch

• 16 Ga. Black Wire (6" Long)

• Throttle Cable Assembly

• 16 Ga. Red Wire (4' Long)

• On/Off Switch

• Insulated Spade Terminal

• 19" Battery Cable

• Insulated Ring Terminal

• Grounded Solenoid

• Electric Clutch

•• Now part of item 13

• Starter Cable

61213

62107

61152

62108

04616-067-02

00111-162-00

00104-847-00

00111-163-00

Not Used

• Cable Assembly, Rear Half

• Assembly, Control Panel **

• Cable Assembly, Front Half

• Tubing, Shrinkable 1/8" x 2"

• Boot, Battery Cable (Battery End)

• Boot, Cable (Solenoid End)

62105

62106

04067-033-00

Parts indented are included in the carton, bag or assembly under which they are indented.

** Includes items 1- 9

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTION FOR

ELECTRIC THROTTLE CONTROLS

(FACTORY INSTALLED ACTUATORS)

WARNING

BEFORE BEGINING ANY INSTALLATION ON THIS UNIT, disconnect the spreader battery

negative cable if already installed.

PREPARING UNIT:

Spreaders with factory installed throttle controls do not require installer hook-up to the engine. The

actuator has been installed and tested at the factory.

Raise the engine shroud and securely prop it in place with the prop rod. The installer will have to remove

the ties securing the coiled actuator cable to the top of the engine.

The throttle actuator cable plugs into the in-cab control panel after being routed from the cab of the

vehicle to the rear of the mounted spreader.

Select a suitable location in the cab of the vehicle to mount the throttle control box.

WARNING

Consult vehicle manufacturer for acceptable mounting locations. Improperly mounting the control box could

interfere with air bag(s) and the other functions of the occupant protection systems, such as knee bolsters!

After the location of the control panel is determined, the cable must be routed to the front of the spreader,

Route cable under the cab and up to the front of the spreader securing as needed. Allow enough cable for

the control panel to be mounted in the cab.

The routed cable must be clear of all moving or hot parts on the sreader or vehicle. Secure the cable with

the ties provided. Excess cable must be coiled up and secured. Apply dielectric grease on Item # 21

page 46 for protection from salt spreading envoirment.

Mount the control panel (with screws supplied).

For permanent cable mount at rear of the truck, a mounting bracket is supplied.

Install a 12 volt battery with 40 ampere hour rating, recommended for winter use (if not already done). The

battery hold-downs furnished will accept any 2 SM Series battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNING

USE SAFETY GLASSES OR OTHER FACE PROTECTION AGAINST POSSIBLE BATTERY

EXPLOSION. DO NOT SMOKE AND AVOID OTHER SOURCES OF IGNITION.

10. Attach the positive battery cable (each end should have a rubber boot) to the positive terminal of the

solenoid and to the positive terminal of the battery. Make sure these protective boots are covering the

positive terminal post on the battery and on the solenoid. Attach one end of the remaining battery cable

to the negative terminal of the battery.

11. Connect the negative battery terminal to the battery hold down post. When finished, make sure all

wires are away from moving parts and lower engine shroud.

12. Plug cable from spreader into socket mounted on truck.

WARNING

Never operate machine with engine shroud in the upright position. Never climb into hopper

while the engine is operating or capable of being operated.

SERIOUS INJURY or DEATH MIGHT OCCUR.

NOTE: Read and fully understand the owners manual supplied by the engine manufacturer

before operating this equipment. Not doing so, endangers your safety and the warranty

of the engine.

Download from Www.Somanuals.com. All Manuals Search And Download.

CENTER HIGH MOUNT STOP LAMP (CHSML)

WARNING

Federal Motor Vehicle Safety Standards require all Trucks, Buses, and Multipurpose passenger

vehicles, manufactured on or after September 1, 1993, with a gross vehicle weight rating (GVWR)

of 10,000 lbs. or less and overall width less than 80" must be equipped with a Center Height

Mount Stop Lamp (CHMSL).

If the original equipment CHMSL is obscured, an auxiliary CHMSL must be installed to bring

vehicle back into compliance with Federal Regulations.

Electrical Connection for Auxiliary CHMSL:

(Notes for all truck makes)

1. Use high quality butt connectors and shrink wrap on all electrical splice connections. Wire should be routed

and secured to protect against abrasion, sharp edges, excessive movement. It is highly recommend that

wiring to be placed in convoluted tubing and secured with tie wraps.

2. When drilling holes, any bare metal should be coated with a rust preventative, use appropriate size grommets

and seal hole with appropriate sealant.

3. Allow for normal movement / twisting between cab and chassis / pickup box when routing wires.

4. When spreader is removed from the truck, the OEM CHMSL must be reconnected.

WARNING

Consult the truck manufacturer for an approved method of connecting an auxiliary CHMSL to the particular truck

which is to carry the Spreader. Methods vary with truck models, optional equipment and years of manufacture.

IMPROPER CONNECTIONS COULD RESULT IN A VARIETY OF PROBLEMS AFFECTING CRITICAL SYSTEMS

SUCH AS BRAKING, ELECTRICAL AND EMISSION ! DON'T GUESS !

PV Spreader CHMSL Installation:

Mount power cable (04616-075-00) with plug at rear of truck frame and route to truck CHMSL power feed. Trim

excess cable length, attach white wire to suitable ground, attach black wire to truck's CHMSL power feed.

Connect cable on spreader to CHMSL power cable.

When the spreader is removed from the truck, the OEM CHMSL must be reconnected.

Download from Www.Somanuals.com. All Manuals Search And Download.

CENTER HIGH MOUNTING STOP LIGHT

ITEM

PART NUMBER

QTY.

DESCRIPTION

62097

00002-144-00

04605 153 00

04605 154 00

04605 155 00

04616 075 00

00111 339 00

00111 428 00

Kit, Center High Mount Stop Light

• Lamp, Stop

• Grommet

• Cable, Light Power

• Cable, Stop Lamp

62714

62715

62364

62738

62283

62739

• Weld, Stop Lamp Bracket - Hydraulic Units ONLY

• Hardware Bag - Not Shown

(GAS ENGINE)

(HYDRAULIC)

Download from Www.Somanuals.com. All Manuals Search And Download.

HYDRAULICS

WARNING

LEAKING HIGH PRESSURE FLUIDS CAN INJECT THEMSELVES UNDER THE SKIN OF PERSONS

NEAR A LEAK, CREATING GRAVE MEDICAL RISKS. TAKE CARE TO AVOID EXPOSURE TO

HIGH PRESSURE FLUIDS.

1 . Hydraulic components should be kept as clean as possible during assembly operations.

2. Galvanized pipe and pipe fittings must not be used because flaking or galvanizing material can cause

damage to major hydraulic components.

3. A pipe joint sealant, compatible with hydraulic oil, must be applied to all screwed fittings. (Teflon tape is not

recommended.)

4. Hose should be protected where severe wear may be caused by vibration or sliding movement.

5. Long runs of hose should be supported by tie wiring or clamping.

6. Pressure and return hoses, connected to hydraulic motors, may be reversed for proper motor rotation.

Spinner rotates in a clockwise direction when looking down from top.

7. Use hose manufacturer’s recommendations for fitting re-useable hose ends.

8. Hydraulic pumps must be mounted so shaft rotates in direction of arrow.

9. Locate reservoir as close to pump as possible. It may be installed on truck frame or truck box.

10. Hydraulic return line filter is screwed directly onto reservoir with cartridge down. Oil must flow through filter

in direction of arrow on filter.

11. Install the quick connect couplings so that when disconnected, there is a male and female on the truck as

well as on the spreader. This way, hoses will always be hooked up properly. and hose ends can be coupled

together when spreader is in storage to prevent system contamination.

12. See page 13 for valve assembly

13. Operate hydraulic system for several minutes to warm up. Check all connections for leaks.

14. After running, refill reservoir to three fourths full.

CONTROL AND HYDRAULIC SYSTEM SPECIFICATIONS

* Hydraulic Oil ................................. Good Grade of MS10W Hydraulic Oil Which has

wear, oxidation and foam inhibitors.

* Oil Filter ........................................ 10 Micron Element Return Line Filter.

* Relief Valve Setting ...................... 1500 PSI

* Oil Flow......................................... 0 - 10 GPM

Download from Www.Somanuals.com. All Manuals Search And Download.

SINGLE FLOW CONTROL VALVE

DUAL FLOW VALVE/STAND

61190

(04105-306-00)

INSTALLATION INSTRUCTIONS

1. IMPORTANT: A pipe joint sealant compatible with

hydraulic oil must be applied to all screw fittings.

(Teflon Tape Sealant Is Not Recommended)

FLANGE PLATE

00105-873-00

2. Hose ends connected to flow valve must be of the

"swivel" type.

3. CAUTION: Over tightening of the fittings in flow valve

may cause damage to valve body.

4. Approximately 8" of hose slack must be realized

between the flow valve and valve stand after the

flow valve has been completely plumbed. If this

condition does not exist after the plumbing has

been completed, removal of valve will require hoses

to be removed at opposite end of valve.

BOTTOM VIEW

A - A

(SHOWN W / O FITTINGS)

5. Assembly of valve on stand:

a. Cut a 5" x 5" square opening in floor board of

truck where the valve stand is to be located.

b. Bolt valve stand halves together forming a

"box" over the 5" x 5" square opening. NOTE:

When bolting valve stand halves in place,

make sure holes in flanges align with holes in

flange plate.”*”

8.0"

HOSE SLACK

AFTER PLUMMING

c. Bolt flange plate to VALVE (Use (2) 1/4" x 3"

bolts, lockwashers, etc.)

VALVE STAND

(2) HALVES

00105-874-00

d. Insert hoses through floor opening and valve

stand and connect appropriate hoses (see

instructions #1 thru #4) to flow valve.

e. Bolt flange plate to valve stand flanges.

TRUCK CAB

FLOOR BOARD

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

WARNING

BEFORE OPERATING THE CONTROL PANEL - MAKE SURE THAT NO ONE IS INSIDE

THE HOPPER OR NEAR THE SPINNER.

Manual Throttle: All gasoline engine models come with a control panel. If your spreader is a manual

throttle model, look at your control panel. It will have (3) controls

mounted on it. The one on the far left is the start button. The right toggle is the electric

clutch control. When the switch is in the “OFF” position, the electric clutch is disengaged

and the conveyor and spinner will stop. In the “ON” position, conveyor and spinner will operate. The

middle control is the throttle. Your engine is equipped with a semi-

automatic choke. To activate

the choke, pull the throttle cable all the way out. To remove the choke function when engine us warm,

push throttle cable in, to desired engine RPM.

THROTTLE

START

OFF

Electric Throttle Control Panel Switch Functions

(Sequence of Operations)

CHOKE

OFF

START

RED LENSE

THROTTLE

Download from Www.Somanuals.com. All Manuals Search And Download.

Electric Throttle Control Panel Switch Functions Cont.

A. ON/OFF

System power activated (ready to start). Spreader engine is not running.

Spreader conveyor is not engaged.

B. START (Engine only)

Open fuel shut off valve on engine.

On switch depressed.

(cold engine ) Hold down for 5 seconds to move the throttle actuator to

the choke position.

Choke

Note: Choking a warm engine may not be necessary.

Hold down until engine starts.

4a.

Start

On models with 6.5 HP at temperatures under minus 20^oF (minus 29^oC) it mat be

necessary to start the engine manually.

Turtle

Rabbit

Deceases throttle speed - adjust as engine warms up. Will stop the choke function.

Increases throttle speed.

C. TO ENGAGE Spreader Conveyor

1. Push CONVEYOR switch only after you are sure no one is in the hopper or near the spinner! This lights up

the red indicator light, if light does not light, take care to verify that the light is not malfunctioning.

D. TO CONTROL Conveyor Speed.

1. Hold RABBIT to increase speed. NOTE: Do not hold switch in HI position after the desired RPM is achieved

or you will choke and/or stall the engine.

2. Hold TURTLE to decrease speed.

E. TO DISENGAGE Spreader Conveyor.

1. Tap START switch momentarily so that red indicator light goes out. Do not fully depress the START switch,

only half way is needed. Only the conveyor stops, the engine continues to run.

F. TO TURN ENGINE OFF (with or without conveyor running).

1. Depress LO on throttle control to reduce setting to idle (this prevents engine flooding and hard starting).

2. Push OFF position on the ON/OFF switch.

NOTE: OFF can be pushed at anytime during spreader operation to cut power to the unit . However, you

should normally use steps under F above.

(Once the off switch is depressed - the starting procedure must be followed for engine re-start.)

G. Do not attempt to start the engine with the conveyor engaged. (CONV switch light will be lit to indicating its'

being on.)

H. Close fuel shutoff valve on engine if unit is to be transported while not running.

WARNING

1. As with all power equipment, safety is the number one concern.

2. Do not operate this equipment until you fully understand how it functions.

3. Before starting engine, be sure that no one is near the rear of the unit and that no one is inside the

unit!

4. Do not start the engine or engage the conveyor (which is interconnected to the spinner); until everyone

is clear from moving parts and flying material from the spinner.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPREADER OPERATION

A. Start the engine and engage the clutch. The amount of material spread, depends on engine speed and gate

opening. Decreasing RPM and/or gate height will decrease amount spread; the inverse holds true also.

Notice that the electric clutch can be engaged or disengaged at any time and at any engine RPM. However,

since engagement time and torque is almost instantaneous, to prevent premature spinner chain failure and

chain tension loss, it is recommended that the electric clutch be engaged at the lowest possible RPM

without stalling the engine.

If the truck is to be driven for an extended period of time while the spreader is not operating, it is RECOMMENDED

to turn off the gas at the carburetor inlet to prevent the carburetor from over filling with fuel.

Before loading the spreader the first time, start and stop the conveyor several times to break in the clutch.

WARNING

ALWAYS STAND AT A SAFE DISTANCE AWAY FROM THE SPINNER WHILE OPERATING

ALWAYS WEAR EYE PROTECTION WHEN OUTSIDE OF THE TRUCK CAB WHILE

SPREADER IS RUNNING.

B. Spread pattern depends on baffle settings and spinner RPM. Maximum spreader width is 30 ft.

1. Speeding up or slowing down the engine will increase or decrease spread pattern width.

2. Internal baffle adjustments will move the spread pattern to the right or left.

3. External baffle adjustments will block spreading to the right or left side.

DESIRED SPREAD PATTERN

CENTERED BEHIND TRUCK

BAFFLE SETTING

INTERNAL

EXTERNAL

BOTH DOWN

ALL THREE UP

BEHIND TRUCK AND LEFT

RH - DOWN

LH - UP

RH - DOWN

LH - UP

BEHIND TRUCK AND RIGHT

WINDROW BEHIND TRUCK

RH - UP

LH - DOWN

RH - DOWN

LH - DOWN

ALL - DOWN

4. External Baffles can be lowered to an intermediate position to baffle down the particles that may otherwise

leave the spinner at a high trajectory.

Download from Www.Somanuals.com. All Manuals Search And Download.

June, 2000

SERVICE BULLETIN NO. 178

1.8, 2.0 and MDV Insert Hopper Spreader

Briggs & Stratton Corporation and Honda Engine Motor of America have stated in

their manuals:

DO NOT TRANSPORT ENGINE WITH FUEL IN TANK OR WITH FUEL

SHUT-OFF VALVE OPEN.

Failure in doing this may cause the engine crankcase to fill with fuel. If this occurs the

engine warranty will be void by the engine manufacturer. It is the responsibility of the

end user to ensure that the fuel shut-off is closed when the engine is not in operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

WARNING

DO NOT ATTEMPT TO LIFT THE SPREADER BY THE CENTER LIFT OR CORNER LIFT HOOKS

WITH MATERIAL IN THE SPREADER.

BEFORE BEGINNING ANY MAINTENANCE ON SPREADER, DISCONNECT SPREADER

BATTERY LEADS.

Grease idler bearings on idler shaft takeup assembly, outboard bearing on gearbox output shaft, and

lower spinner bearing every ten hours of operation.

Grease input shaft bearing on gearbox every fifty hours of operation. CAUTION! Over greasing may

cause seal damage. The gearbox must be filled to oil level plug with SAE 90 gear type lubricant. Keep

breather plug clean.

Drag chain slack on V-boxes should be checked periodically and taken up if distance between center line

of rear sprocket and point where chain contacts lower flange on longitudinal is less than eight (8) inches.

CAUTION! Over tightening conveor chain can cause serious drive train problems. Above distance must

not exceed 20 inches.

If the spreader is equipped with a gasoline engine, it should be maintained per engine manufacturer's

instruction. (Instructions and parts book is enclosed.)

V-belt tension must be maintained. The v-belt can be tightened by loosening engine hold-down bolts and

sliding engine as required. CAUTION! Over tightening of v-belt may damage gearbox.

Roller chain tension must be maintained. It is adjusted by loosening the spinner mounting bearings and

sliding the bearings. Make sure the spinner shaft is straight up and down before retightening. Oil chain

often and at end of season.

When the box is not in use, it should be washed out. If the box is put in storage, all surfaces should be

oiled or painted after washing.

For HYDRAULIC SPREADERS, maintain oil level three fourths (3/4) full in reservoir with clean high grade

non-foaming hydraulic oil; recommended viscosity 100-200 SSU. Operating temperature should be limited

to 180°F. Replace filter cartridge No. 62382 (04104 005 00) at least twice a year.

If chain becomes stuck or "froze" to the floor to the point where the clutch cannot pull the load, never

attempt to free chain using a pipe wrench or any other tool on the output shaft. The gearbox is designed

to accept torque from input shaft only. Trying to turn output shaft will strip the gears, thus voiding the

warranty.

10.

To minimize problems and extend the life of the Electric Clutch, the following is highly recommended.

Before starting unit, make sure the drag chain is free (not stuck or "froze" to the

floor). If the drag chain is stuck, this can cause the clutch to burnup.

After the using season is over, remove clutch from unit, and clean thoroughly.

After cleaning, coat both mating surfaces of the clutch with oil or light weight

grease.

NOTE: The Oil or Grease must be removed prior to the next using season.

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR HYDRAULIC MOTOR

60324 (04101-035-00)

PARTS LIST

ITEM

PART NUMBER

20644

——————

62118

——————

62756

——————

62757

QTY.

DESCRIPTION

04101-035-01

——————

04101-102-02

——————

04101 035 05

——————

04101 035 07

04009 002 02

04101 035 09

04101 035 10

——————

04101 035 12

04101 035 13

04101-035-14

—

Screw, 5/16" - 24 x 7/8"

Seal

Flange, Mounting (4 Bolt)

Seal, O-Ring

Race, Bearing

Seal, O-Ring

Bearing, Thrust Needle

Key, 1/4" x 1" Woodruff

Shaft, Output

Housing

Seal, O-Ring

21203

62758

62809

——————

62759

Drive (For 04101 035 00)

Plate, Spacer

Screw, 5/16" - 24 x 1 1/2" Cap

62760

62761

62814

62405

04101 035 15

04101 035 17

04101 035 18

04101 035 21

Gerotor Set (For 04101 035 00)

Cap, End

Washer, Seal

62762

Repaired Motor

(for 04101 035 00)

Seal Kit (Char-Lynn)

Seal Kit (White)

62406

62359

04101 102 09

04101 035 98

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR HYDRAULIC DRIVEN

HOPPER ASSEMBLIES

(Carbon Steel) After 11-1998 S/N 85171

1.8 Cu. Yd.(62520) - 2.0 Cu. Yd. (62521)

PARTS LIST

ITEM

PART NUMBER

62740

QTY.

DESCRIPTION

Weld, 1.8 Hopper

00115-156-08

00115-156-10

04132-074-00

04003-033-04

00115-167-01

04009-001-01

04043-013-00

04043-016-00

04003-005-14

04004-001-09

04033-003-04

04004-001-07

04003-806-12

04080-053-00

04003-002-04

04003-002-02

04003-806-13

00101-326-00

04003-034-01

04003-806-03

00101-325-00

06022-001-00

04624-001-01

00110-819-00

04101-035-00

04101-102-02

04101-102-09

04101-035-98

06011-000-00

04008-001-00

04003-003-03

04004-002-08

00105-302-00

00106-366-00

04003-802-05

04007-005-04

00115-173-01

00115-139-01

00110-817-00

04004-002-09

04010-003-02

04003-033-12

04003-804-02

00101-636-00

04043-017-00

04045-023-00

04045-021-00

04045-025-00

62741

61178

62615

62742

61201

61158

62129

62617

20329

20066

20327

62743

61165

22418

22419

62641

61170

62644

62570

61172

61171

61169

62281

60324

62118

62406

62359

62201

62202

20049

20353

62073

62326

62408

62745

62320

62310

62280

20354

20384

62746

20305

62270

61173

62002

61174

62755

Weld, 2.0 Hopper

Gearbox, Assembly

Bolt, 3/8-16 x 1-1/4 Car. GR. 5 ZP

Guard, Conveyor

Key, 1/4” X 7/8” Woodruff

Weld, Drag Chain, 7 Ft.

Weld, Drag Chain, 8 Ft.

Bolt, 1/2-13 x 3/4 HH GR5 ZP

Lockwasher, 1/2” Med Split ZP

Bolt, 3/8-16 x 1-1/4 HH GR5 ZP

Lockwasher, 3/8” Med Split ZP

Nut, 3/8-16 Serrated Flange SS

Bearing, 2 Bolt Flange

Bolt, 5/16-18 x 1 HH GR5 ZP

Bolt, 5/16-18 x 3/4 HH GR5 ZP

Nut, 5/16-18 Serrated Flange SS

Plate, Front Bearing

Bolt, 1/2-13 x 1 Car Sht NK

Nut, 1/2-13 Hex ZP

Weld, Idler Shaft

Sprocket, Drag Chain

Knob, Hand

Weld, Feedgate

Motor, Hydraulic

Flange Mounting (4Bolt)(Char-Lynn)

Seal Kit (Char-Lynn)

Seal Kit (White)

Plate, Motor Mtg.

Bushing, 3/8” I.D. x 5/8” O.D.

Bolt, 3/8-16 x 1 HH GR5 ZP

Flatwasher, 3/8” U.S.S. ZP

Coupling, Shaft

N/S

Setscrew 1/2” x 6”

Nut, 1/2-13 Hex Jam ZP

Setscrew, 1/4-20 x 3/8” Al. HD

Shield, Rep. Chain 7 Ft.

Shield, Rep. Chain 8 Ft.

Handle

Flatwasher, 7/16” U.S.S. ZP

Pin, 1/8” x 1” Cotter

Bolt, 3/8-16 x 3/4 Car GR5 SS

Locknut, 3/8-13 Nylon Insert ZP

Bar, Pivot

Drag Chain w/Links

Connecting Link Only

Pin, Master for Chain w/o Cotter

Pin, Cotter Only

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR HYDRAULIC DRIVEN

HOPPER ASSEMBLIES

(Carbon Steel)

1.8 Cu. Yd.(62520) - 2.0 Cu. Yd. (62521)

Continued

PARTS LIST

ITEM

PART NUMBER

62497

QTY.

DESCRIPTION

04049-002-00

04049-165-00

04049-182-00

04049-195-00

00115-172-01

00115-109-01

04003-018-04

04003-032-06

00115-154-01

04605-155-00

00111-339-00

04605-153-00

04605-154-00

00102-347-00

04031-010-00

04080-005-00

04076-100-00

Decal, Meyer

62571

62009

62572

62318

62292

62747

62640

62314

62364

62283

62714

62715

62284

62000

61163

62354

Decal, Serial (w/Pat. Nos.)

Decal, Danger (Conveyor)

Decal, Motor

Floor, Forming 7 Ft.

Floor, Forming 8 Ft.

Screw, 3/8-16 x 1 3/16 Slt. Fl. HD

Bolt, 5/16-18 x 3/4 Car GR5 SS

Guard, Shaft

Cable, Light Power

Weld, Stop Lamp Bracket

Lamp, Stop (Ctr Hgh Mt)

Grommet, Mtg

Sprocket, Drive (w/set screws)

Key, 1/4” Square x 2”

Bearing, Drive

Wiper, Chain

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR HYDRAULIC DRIVEN

HOPPER ASSEMBLIES

(Stainless Steel) After 11-1998 S/N 85171

1.8 Cu. Yd.(62522) - 2.0 Cu. Yd. (62523)

PARTS LIST

ITEM

PART NUMBER

62748

QTY.

DESCRIPTION

00115-156-09

00115-156-11

04132-074-00

04003-033-05

00115-167-02

04009-001-01

04043-013-00

04043-016-00

04003-005-56

04004-001-16

04003-003-26

04004-001-14

04003-806-12

04080-053-00

04003-002-24

04003-002-23

04003-806-13

00101-326-01

04003-034-14

04003-806-16

00101-325-00

06022-001-00

04624-001-01

00110-819-01

04101-035-00

04101-102-02

04101-102-09

04101-035-98

06011-000-01

04008-007-00

04003-003-20

04004-002-20

00105-302-00

00106-366-00

04003-802-09

04007-005-04

00115-173-02

00115-139-02

00110-817-00

04004-002-32

04010-003-02

04003-033-12

04003-804-08

00101-636-00

04043-017-00

04045-023-00

04045-021-00

04045-025-00

Weld, 1.8 Hopper, S3

Weld, 2.0 Hopper, S3

Gearbox, Assembly

Bolt, 3/8-16 x 1 1/4 Car SS

Guard, Conveyor, S3

62749

61178

62777

62317

61201

61158

62129

62750

22380

62695

22379

62743

61165

62751

62752

62641

62268

62753

62754

61172

61171

61169

62282

62398

62118

62406

62359

62368

62339

62697

22230

62073

62326

62336

62745

62321

62311

62280

62808

20384

62746

62638

62270

61173

62002

61174

Key, 1/4” X 7/8” Woodruff

Weld, Drag Chain, 7 Ft.

Weld, Drag Chain, 8 Ft.

Bolt, 1/2-13 x 3/4 HH SS

Lockwasher, 1/2” Med Split SS

Bolt, 3/8-16 x 1-1/4 HH SS

Lockwasher, 3/8” Med Split SS

Nut, 3/8-16 Serrated Flange SS

Bearing, 2 Bolt Flange

Bolt, 5/16-18 x 1 HH SS

Bolt, 5/16-18 x 3/4 HH SS

Nut, 5/16-18 Serrated Flange SS

Plate, Front Bearing, S3

Bolt, 1/2-13 x 1 Car Sht NK, SS

Nut, 1/2-13 Serrated Flange SS

Weld, Idler Shaft

N/S

Sprocket, Drag Chain

Knob, Hand

Weld, Feedgate, S3

Motor, Hydraulic

Flange Mounting (4Bolt)(Char-Lynn)

Seal Kit (Char-Lynn)

Seal Kit (White)

Plate, Motor Mtg., S3

Bushing, 3/8” I.D. x 5/8” O.D., SS

Bolt, 3/8-16 x 1 HH SS

Flatwasher, 3/8” U.S.S. SS

Coupling, Shaft

Setscrew 1/2” x 6”

Nut, 1/2-13 Hex Jam SS

Setscrew, 1/4-20 x 3/8” Al. HD

Shield, Rep. Chain 7 Ft., S3

Shield, Rep. Chain 8 Ft., S3

Handle

Flatwasher, 7/16” U.S.S. SS

Pin, 1/8” x 1” Cotter

Bolt, 3/8-16 x 3/4 Car GR5 SS

Locknut, 3/8-16 Nylon Insert SS

Bar, Pivot

Drag Chain w/Links

Connecting Link Only

Pin, Master for Chain w/o Cotter

Pin, Cotter Only

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR HYDRAULIC DRIVEN

HOPPER ASSEMBLIES

(Stainless Steel)

1.8 Cu. Yd.(62522) - 2.0 Cu. Yd. (62523)

Continued

PARTS LIST

ITEM

PART NUMBER

62497

QTY.

DESCRIPTION

Decal, Meyer

Decal, Serial (w/Pat. Nos.)

Decal, Danger (Conveyor)

Decal, Motor

Floor, Forming 7 Ft., S3

Floor, Forming 8 Ft., S3

Screw, 3/8-16 x 1 -1/4” Slt Fl HD SS

Bolt, 5/16-18 x 3/4 Car SS

Guard, Shaft, S3

04049-002-00

04049-165-00

04049-182-00

04049-195-00

00115-172-02

00115-109-02

04003-018-05

04003-032-06

00115-154-02

04605-155-00

00111-339-00

04605-153-00

04605-154-00

00102-347-00

04031-010-00

04080-005-00

04076-100-00

62571

62009

62572

62319

62293

62771

62640

62315

62364

62283

62714

62715

62284

62000

61163

62354

Cable, Light Power

Weld, Stop Lamp Bracket

Lamp, Stop (Ctr Hgh Mtg)

Grommet, Mtg.

Sprocket, Drive (w/set screws)

Key, 1/4” Square x 2”

Bearing, Drive

Wiper, Chain SS

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR ENGINE DRIVEN

HOPPER ASSEMBLIES

(Carbon Steel) After 11-1998 S/N 85171

1.8 Cu. Yd. (62209) - 2.0 Cu. Yd. (62517)

PARTS LIST

ITEM

PART NUMBER

62740

QTY.

DESCRIPTION

00115-156-08

00115-156-10

00101-325-00

06022-001-00

04007-005-04

00101-326-00

04080-053-00

04003-032-05

04003-806-13

04003-034-01

04003-806-03

00106-366-00

04003-802-05

04132-074-00

04003-005-14

04004-001-09

04003-003-04

04003-806-12

04043-013-00

04043-016-00

04003-018-04

04003-032-06

00115-173-01

00115-139-01

04071-016-00

00115-172-01

00115-109-01

00115-655-00

00115-717-00

04143-024-00

04003-002-02

04622-008-00

00104-822-00

04003-001-05

04004-001-05

04003-806-05

04145-063-00

04145-064-00

04031-007-00

04070-021-00

04007-005-04

04003-002-06

04048-518-01

04004-002-07

04093-022-00

04146-005-00

04638-039-04

04638-043-02

00115-663-00

00115-664-00

00001-774-00

Weld, 1.8 Hopper

Weld, 2.0 Hopper

Weld, Idler Shaft

62741

61172

61171

62747

61170

61165

20599

62641

62744

62570

62326

62408

61178

62617

20329

20066

62743

61158

62129

62771

62640

62320

62310

61162

62318

62292

62555

62701

61188

62763

61168

61176

20005

20305

62187

62208

62361

61196

61177

62745

62764

61205

20352

62765

61179

62046

62188

62545

62766

62483

Sprocket, Drag Chain

•Setscrew1/4-20x3/8”Al.HD

Plate, Front Bearing

Bearing, 2 Bolt Flange

Bolt, 5/16-18 x 3/4 Car GR5 ZP

Nut, 5/16-18 Serrated Flange SS

Bolt, 1/2-13 x 1 Car Sht NK

Nut, 1/2-13 Serrated Flange ZP

Setscrew, 1/2’ x 6”

Nut, 1/2-13 Hex Jam ZP

Assy, Gearbox

Bolt, 1/2-13 x 3/4 HH GR5 ZP

Lockwasher, 1/2” Med Split ZP

Bolt, 3/8-16 x 1-1/4” HH GR5 ZP

Nut, 3/8-16 Serrated Flange SS

Weld, Drag Chain, 7 Ft.

Weld, Drag Chain, 8 Ft.

Screw, 3/8-16 x 1 -1/4 Slt Fl HD

Bolt, 5/16-18 x 3/4 Car SS

Shield, Rep. Chain 7 Ft.

Shield, Rep. Chain 8 Ft.

V-Belt

Floor, Forming, 7 Ft. (1.8)

Floor, Forming, 8 Ft. (2.0)

Assy., Control Cable, Briggs & Stratton(E.T.) Pg.33

Assy., Control Cable, Honda( Electric Throttle) Pg.32

Cable, Throttle Control Manual - Pg.6-7

Bolt, 5/16-18 x 2 HH GR5 ZP

Cover, Clutch

Retainer, Clutch

Bolt, 1/4-20 x 1 HH GR5 ZP

Lockwasher, 1/4” Med Split ZP

Nut, 1/4-20 Serrated Flange ZP

Engine, 10 1/2 HP I/C Briggs & Stratton

Engine, 11 HP Honda

Key, 1/4” Sq x 1”

Pulley, Driver

Setscrew, 1/4-20 x 3/8” Al. HD

Bolt, 5/16-18 x 1 1/2 HH GR5 ZP

Bolt, “L”

Flatwasher, 5/16” U.S.S. ZP

Grommet, CA Plug Type (1-1/4”)

Solenoid, Grounded (Briggs & Stratton Only)

Terminal, Insulated Ring

Connector 16-14 Insulated Butt

Carton, Shipping, Briggs & Stratton

Carton, Shipping, Honda

N/S

A/R Safety Decal Package

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR ENGINE DRIVEN

(Carbon Steel)

1.8 Cu. Yd. (62209) - 2.0 Cu. Yd. (62517) Continued

PARTS LIST

ITEM

PART NUMBER

62040

QTY.

DESCRIPTION

Cable, Battery Pg. 7

Cable, Starter Pg. 7

Rod, Battery

Hold Down

Weld, Feedgate

04604-004-00

04616-067-02

00104-802-00

04604-017-00

00110-819-00

04624-001-01

04004-002-10

00117-073-01

00117-074-01

00112-734-00

04004-002-08

04010-016-01

04049-002-00

04049-182-00

04049-199-00

04049-165-00

04607-027-00

04093-021-00

04605-155-00

00110-817-00

04605-154-00

04004-002-32

04010-003-02

04003-033-02

04003-804-02

04003-003-02

00101-636-00

04120-078-01

04120-108-01

04110-006-03

04121-057-01

04003-033-04

04043-017-00

04045-023-00

04045-021-00

04045-025-00

04067-032-00

04067-033-00

04605-153-00

04080-005-00

00102-347-00

04031-010-00

04001-001-01

04041-085-00

04046-016-04

04009-001-01

04076-100-00

00115-167-01

04070-020-00

04138-017-00

04121-056-01

04121-058-01

04607-028-00

04003-003-26

04003-804-08

61213

61206

62767

62281

61169

20355

62726

62332

61215

20353

62691

62497

62009

62768

62571

62652

62656

62364

62280

62715

20354

20384

62615

20305

20048

62270

62633

62706

62632

62707

62615

61173

62002

61174

62755

62105

62106

62714

61163

62284

62000

62769

61156

62547

61201

62354

62317

61161

61167

62705

62704

62725

62695

62638

Knob, Hand

Flatwasher, 1/2” U.S.S. ZP

Weld, Shroud (Briggs & Stratton)

Weld, Shroud (Honda)

Rod, Prop

Flatwasher, 3/8” U.S.S. ZP

Pin, 3/32” x 1” Cotter

Decal, Meyer

Decal, Danger (Conveyor)

Decal, Gasoline Only

Decal, Serial (w/Pat. Nos.)

Clamp, Cushioned 1/2”

N/S

2 ft. Trim, Vinyl

Cable, Light Power

Handle

Grommet, Mounting

Flatwasher, 7/16” U.S.S. ZP

Pin, 1/8” x 1” Cotter

Bolt, 3/8-16 x 1 Car GR5 ZP

Locknut, 3/8-16 Nylon Insert ZP

Bolt, 3/8-16 x 7/8 HH GR5 ZP

Bar, Pivot

Hose, 3/8” x 13” (1) Wire (Briggs & Stratton)

Hose, Drain (Honda)

Elbow 3/8” 90 Deg Street (Briggs & Stratton)

Bolt, Banjo (Honda)

Bolt, 3/8-16 x 1 1/4 Car GR5 ZP

Drag chain w/Links

Connecting Link Only

Pin, Master for Chain w/o Cotter

Pin, Cotter Only

Boot, Battery Cable, Straight Pg. 7

Boot, Alternator Cable Pg. 7

Lamp, Stop (Center High Mount)

Bearing, Drive

Sprocket, Drive (w/set screws)

Key 1/4” x Square x 2”

Collar, Set

N/S

Sprocket 41 B13

Chain Roller No. 41 (Old Style Hopper use 61160)

Key 1/4” x 7/8” Woodruff

Wiper, Chain

Cover, Conveyor

Pulley, Driven

Clutch, Electric

Plug (Honda) 37 Degree

Washer (Honda)

Clamp, Prop Rod

Bolt 3/8-16 x 1-1/4” HH,SS

Locknut, 3/8-16 Nylon Insert, SS

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR ENGINE DRIVEN

HOPPER ASSEMBLIES

(Stainless Steel) After 11-1998 S/N 85731

1.8 Cu. Yd.(62516) - 2.0 Cu. Yd. (62518)

PARTS LIST

ITEM

PART NUMBER

62748

QTY.

DESCRIPTION

Weld, 1.8 Hopper, S3

00115-156-09

00115-156-11

00101-325-00

06022-001-00

00101-326-00

04080-053-00

04003-032-06

04003-806-13

04003-034-14

04003-806-16

00106-366-00

04003-802-09

04132-074-00

04003-005-56

04004-001-16

04003-003-26

04003-806-12

04043-013-00

04043-016-00

04003-018-05

04003-032-06

00115-173-02

00115-139-02

04071-016-00

00115-172-02

00115-109-02

00115-655-00

00115-717-00

04143-024-00

04003-002-23

04622-008-00

00104-822-00

04003-001-16

04004-001-19

04003-806-15

04145-063-00

04145-064-00

04031-007-00

04070-021-00

04007-005-04

04003-002-21

04048-518-01

04004-002-25

04093-022-00

04146-005-00

04638-039-04

04638-043-02

00115-663-00

00115-664-00

00001-774-00

A/R

62749

61172

61171

61170

61165

62640

62641

62744

62754

62326

62336

61178

62750

62770

62695

62743

61158

62129

62771

62640

62321

62311

61162

62319

62293

62555

62701

61188

62750

61168

61176

62772

62810

62690

62208

62361

61196

61171

62745

62773

61205

20352

62765

61179

62046

62188

62545

62766

62483

Weld, 2.0 Hopper, S3

Weld, Idler Shaft

Sprocket, Drag Chain

Plate, Front Bearing, S3

Bearing, 2 Bolt Flange

Bolt, 5/16-18 x 3/4” Car SS

Nut, 5/16-18 Serrated Flange SS

Bolt, 1/2-13 x 1 Car Sht NK SS

Nut, 1/2-13 Serrated Flange SS

Setscrew, 1/2’ x 6”

Nut, 1/2-13 Hex Jam SS

Assy, Gearbox

Bolt, 1/2-13 x 3/4” HH SS

Lockwasher, 1/2” Med Split SS

Bolt, 3/8-16 x 1-1/4” HH GR5 SS

Nut, 3/8-16 Serrated Flange SS

Weld, Drag Chain, 7 Ft.

Weld, Drag Chain, 8 Ft.

Screw, 3/8-16 x 1-1/4” Slt Fl HD ss

Bolt, 5/16-18 x 3/4” Car SS

Shield, Rep. Chain 7 Ft., S3

Shield, Rep. Chain 8 Ft., S3

V-Belt

Floor, Forming, 7 Ft., S3 (1.8)

Floor, Forming, 8 Ft., S3 (2.0)

Assy., Control Cable, Briggs & Stratton(E.T.) Pg. 33

Assy., Control Cable, Honda( Electric Throttle)Pg. 32

Cable, Throttle Control (Manual) Pg. 6-7

Bolt, 5/16-18 x 3/4” HH SS

Cover, Clutch

Retainer, Clutch

Bolt, 1/4-20 x 1 HH SS

Lockwasher, 1/4” Med Split SS

Nut, 1/4-20 Serrated Flange SS

Engine, 10 1/2 HP I/C Briggs & Stratton

Engine, 11 HP Honda

Key, 1/4” Sq x 1”

Pulley, Driver

Setscrew, 1/4-20 x 3/8” Al. HD

Bolt, 5/16-18 x 1-1/2 HH SS

Bolt, “L”

Flatwasher, 5/16” U.S.S. SS

Grommet, CA Plug Type (1 1/4”)

Solenoid, Grounded (Briggs & Stratton Only)

Terminal, Insulated Ring

Connector 16-14 Insulated Butt

Carton, Shipping, Briggs & Stratton

Carton, Shipping, Honda

Safety Decal Package

N/S

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR ENGINE DRIVEN

(Stainless Steel)

1.8 Cu. Yd.(62516) - 2.0 Cu. Yd. (62518) Continued

PARTS LIST

ITEM

PART NUMBER

62040

QTY.

DESCRIPTION

04604-004-00

04616-067-02

00104-802-00

04604-017-00

00110-819-01

04624-001-01

04004-002-22

00117-073-02

00117-074-02

00112-734-00

04004-002-20

07010-016-01

04049-002-00

04049-182-00

04049-199-00

04049-165-00

04607-027-00

04093-021-00

04605-155-00

00110-817-00

04605-154-00

04004-002-32

04010-003-02

04003-033-03

04003-804-08

04003-003-27

00101-636-00

04120-078-01

04120-108-01

04110-006-03

04121-057-01

04003-033-05

04043-017-00

04045-023-00

04045-021-00

04045-025-00

04067-032-00

04067-033-00

04605-153-00

04080-005-00

00102-347-00

04031-010-00

04001-001-01

04041-085-00

04046-016-04

04009-001-01

04076-100-00

00115-167-02

04070-020-00

04138-017-00

04121-056-01

04121-058-01

04607-028-00

04003-003-26

04003-804-08

2 ft.

Cable, Battery Pg. 7

Cable, Starter Pg. 7

61213

61206

62767

62282

61169

22351

62774

62775

61215

22230

20384

62497

62009

62768

62571

62652

62656

62364

62280

62715

62811

20384

62776

62638

62812

62270

62633

62706

62632

62607

62813

61173

62002

61174

62755

62105

62106

62714

61163

62284

62000

62769

61156

62547

61201

62354

62317

61161

61167

62705

62704

62725

62695

62638

Rod, Battery

Hold Down

Weld, Feedgate, S3

Knob, Hand

Flatwasher, 1/2” U.S.S. SS

Weld, Shroud (Briggs & Stratton)

Weld, Shroud (Honda)

Rod, Prop

N/S

Flatwasher, 3/8” U.S.S. SS

Pin, 1/8” x 1” Cotter

Decal, Meyer

Decal, Danger (Conveyor)

Decal, Gasoline Only

Decal, Serial (w/Pat. Nos.)

Clamp, Cushioned 1/2”

Trim, Vinyl

Cable, Light Power

Handle

Grommet, Mounting

Flatwasher, 7/16” U.S.S. SS

Pin, 1/8” x 1” Cotter

Bolt, 3/8-16 x 1 Car SS

Locknut, 3/8-16 Nylon Insert SS

Bolt, 3/8-16 x 7/8 HH SS

Bar, Pivot

Hose, 3/8” x 13” (1) Wire (Briggs & Stratton)

Hose, Drain (Honda)

Elbow 3/8” 90 Deg Street (Briggs & Stratton)

Bolt, Banjo (Honda)

Bolt, 3/8-16 x 1 1/4 Car SS

Drag Chain w/Links

Connecting Link Only

Pin, Master for Chain w/o Cotter

Pin, Cotter Only

N/S

Boot, Battery Cable, Straight Pg. 7

Boot, Alternator Cable Pg. 7

Lamp, Stop (Center High Mount)

Bearing, Drive

Sprocket, Drive (w/set screws)

Key 1/4” x Square 2”

Collar. Set

Sprocket 41 B13

Chain roller No. 41 (Old Style Hopper use 61160)

Key 1/4” x 7/8” Woodruff

Wiper, Chain

Cover, Conveyor S3

Pulley, Driven

Clutch

N/S

Plug (Honda)

Washer (Honda)

Clamp, Prop Rod

Bolt 3/8-16 x 1-1/4” HH,SS

Locknut, 3/8-16 Nylon Insert, SS

Download from Www.Somanuals.com. All Manuals Search And Download.

18:22

7:5

DURST GEAR BOX ASSEMBLY (61178)

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR DURST GEAR BOX ASSEMBLY (61178)

PARTS LIST

ITEM

PART NO.

04132-074-01

QTY.

DESCRIPTION

62033

62034

62035

62036

62025

62022

62019

62026

62027

62020

62028

62037

62032

62029

62024

61166

62030

62016

62017

61236

62031

62023

62018

62021

Housing

Cover

04132-074-02

04132-074-03

04132-074-04

04132-061-05

04132-004-17

04132-004-02

04132-061-08

04132-061-09

04132-004-04

04132-061-11

04132-074-12

04132-065-13

04132-061-14

04009-002-01

04132-004-18

04132-061-17

04110-021-01

04110-021-03

04015-005-00

04132-061-20

04132-013-14

04132-003-09

04132-004-05

Worm Gear - Bronze

Worm

Bearing Cone

Bearing Cup

Snap Ring Input

Snap Ring Output

Snap Ring

Capscrew, 3/8" x 3/4" H.H.

Shaft-Input

Shaft-Output

Woodruff Key - Hard

Seal Input

Seal Output

Plug, 1/8" - 27 NPTF

Plug, Level, 3/8" - 18 NPTF

Zerk, 1/4" - 28 NF

Gasket, Cover (Not Shown)

Plug, Vent, 1/8" - 27 NPTF

Cap

A/R Shim (Not Shown)

Download from Www.Somanuals.com. All Manuals Search And Download.

SUPERIOR GEARBOX ASSEMBLY

17, 18

5, 7

Section A-A

7, 6

Notes:

1. Gear Ratio is: 20:1

2. Torque 3/8-16 Capscrews

(20, 21) to 35-40 ft. lbs.

Section B-B

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR

SUPERIOR GEARBOX ASSEMBLY

62902 (04132-117-00)

After 11/4/02

ITEM

PART NUMBER

62903

QTY.

DESCRIPTION

Gear, Worm, LH 20:1

04132-113-01

04132-113-02

04132-113-03

04132-113-04

04132-113-05

04132-113-06

04132-113-07

04132-113-08

04132-113-09

04132-113-10

04132-113-11

04132-113-12

04132-113-13

04132-113-14

04132-113-15

04132-113-16

04132-113-17

04132-113-18

04132-113-19

04132-113-20

04132-113-21

04132-113-22

04132-117-23

04132-117-24

04132-113-25

04132-113-26

62904

62905

62906

62907

62908

62909

62910

62911

62912

62913

62914

62915

62916

62917

62918

62919

62920

62921

62922

62923

62924

62925

62926

62927

62928

Casting, Machined

Casting, Machined Thru

Gear, Worm 20:1 LH 1/4 Keyway

Bearing, Cone TMKN # 15101

Bearing, Cone TMKN # 15126

Bearing, Cup TMKN # 15245

Retaining Ring, Ext. 1.000 Shaft

Retaining Ring, Ext 1.250 Shaft

Seal, 1.000

Seal, 1.250

Key, 1/4 x 1/4, 1.080

Key, 1/4 x 1/4, 1.580

Plug, 1/4-18 NPT SCHD W/3M

End Cap, CP-2.312

End Cap, CP-2.000

Bushing, 1/4 NPT x 1/8 NPT

Plug, Vent 5 PSI

Seal, 1.000

Socket Head Cap Screw, 5/16”-18 x 1.50

Socket Head Cap Screw, 5/16”-18 x 1.75

Zerk, Grease

Shaft, Input

Shaft, Output

End Cap, CP-1.500

Lube / EP 85W140

Download from Www.Somanuals.com. All Manuals Search And Download.

SHORT SPINNER ASSEMBLY

18 REF.

17 REF.

DANGER

CAUTION

DETAIL - A

12 - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR SPINNER ASSEMBLY

SHORT - PARTS ONLY

(ORIGINAL VERSION OF STANDARD)

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

62504

62512

62506

00002-296-01

00002-296-05

00002-296-02

Short (Steel) Spinner Assy.

Short (Steel) W/Poly Disc.

Short (304SS) Spinner Assy.

62778

62779

61151

61180

62146

62356

61164

61187

61181

62273

61182

62272

61183

62275

62313

61232

62007

62006

61196

61156

61157

62358

62780

62331

62781

62782

62783

62333

62784

00115-576-01

00115-576-02

00104-804-00

00104-849-00

04622-033-00

04080-079-00

04080-011-00

00104-956-00

00104-811-00

00104-811-01

00104-810-00

00104-810-01

00104-835-00

00104-835-01

00115-150-00

04011-001-01

04049-045-00

04049-044-00

04031-007-00

04041-085-00

04041-086-00

04091-028-00

00115-165-00

00115-545-01

00115-545-02

00115-579-01

00115-579-02

00115-580-01

00115-580-02

• Weld, Spinner Frame (Carbon Steel)

• Weld, Spinner Frame (304 Stainless Steel)

• Shaft, Spinner

• Weld, Spinner Disc

• Disc, Poly Spinner

N/S

• Bearing

• Bearing 1” (Old Style Hopper)

• Bearing Bracket, Weldment (Old Style)

• Weld, L. H. Baffle (Carbon Steel)

• Weld, L. H. Baffle (304 Stainless Steel)

• Weld, R. H. Baffle (Carbon Steel)

• Weld, R. H. Baffle (304 Stainless Steel)

• Weld, Rear Baffle (Carbon Steel)

• Weld, Rear Baffle (304 Stainless Steel)

• Link Bar, S3

• Hairpin Keeper

• Decal, Caution

• Decal, Danger

• Key, 1/4” Sq. x 1”

13b

• Sprocket Drive 41 B 13

• Sprocket Drive 41 B 19 (Old Style Hopper)

• Spring, Compression

• Hardware Bag

• Weld, R. H. Handle (Carbon Steel)

• Weld, R. H. Handle (304 Stainless Steel)

• Plate, Baffle (Carbon Steel)

• Plate, Baffle (304 Stainless Steel)

• Weld, L. H. Handle (Carbon Steel)

• Weld, L. H. Handle (304 Stainless Steel)

PARTS LIST FOR HYDRAULIC MOTOR DRIVEN UNITS

PART NUMBER

QTY.

DESCRIPTION

62508

62510

00002-296-03

00002-296-04

Standard Hydraulic (Steel) Spinner Assy.

Standard Hydraulic (304SS) Spinner Assy.

62785

62786

62787

62788

62789

62790

62791

62792

00115-721-01

00115-721-02

04101-119-00

00106-490-00

00115-722-01

00115-722-02

00107-080-00

00107-080-01

• Weld, Spinner Frame (Carbon Steel)

• Weld, Spinner Frame (304 Stainless Steel)

• Motor, Hydraulic

• Weld, Shaft

• Bracket, Motor Mount (Carbon Steel)

• Bracket, Motor Mount (304 Stainless Steel)

• Bushing

• Bushing, (304 Stainless Steel)

Download from Www.Somanuals.com. All Manuals Search And Download.

INTERMEDIATE - STANDARD

SPINNER ASSEMBLY

18 REF.

17 REF.

DANGER

CAUTION

DETAIL - A

12 - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR EXTENDED SPINNER ASSEMBLY

INTERMEDIATE - STANDARD (NEW)

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

62929

62930

00002-296-13

00002-296-14

Standard (Steel) W/Poly Disc.

Standard (304SS) Spinner Assy.

62931

62932

62933

61180

62146

62356

61164

61187

61181

62273

61182

62272

61183

62275

62313

61232

62007

62006

61196

61156

61157

62358

62780

62331

62781

62782

62783

62333

62784

00119-091-01

00119-091-02

00119-083-00

00104-849-00

04622-033-00

04080-079-00

04080-011-00

00104-956-00

00104-811-00

00104-811-01

00104-810-00

00104-810-01

00104-835-00

00104-835-01

00115-150-00

04011-001-01

04049-045-00

04049-044-00

04031-007-00

04041-085-00

04041-086-00

04091-028-00

00115-165-00

00115-545-01

00115-545-02

00115-579-01

00115-579-02

00115-580-01

00115-580-02

• Weld, Spinner Frame (Carbon Steel)

• Weld, Spinner Frame (304 Stainless Steel)

• Shaft, Spinner

• Weld, Spinner Disc

• Disc, Poly Spinner

N/S

• Bearing

• Bearing 1” (Old Style Hopper)

• Bearing Bracket, Weldment (Old Style)

• Weld, L. H. Baffle (Carbon Steel)

• Weld, L. H. Baffle (304 Stainless Steel)

• Weld, R. H. Baffle (Carbon Steel)

• Weld, R. H. Baffle (304 Stainless Steel)

• Weld, Rear Baffle (Carbon Steel)

• Weld, Rear Baffle (304 Stainless Steel)

• Link Bar, S3

• Hairpin Keeper

• Decal, Caution

• Decal, Danger

• Key, 1/4” Sq. x 1”

13b

• Sprocket Drive 41 B 13

• Sprocket Drive 41 B 19 (Old Style Hopper)

• Spring, Compression

• Hardware Bag

• Weld, R. H. Handle (Carbon Steel)

• Weld, R. H. Handle (304 Stainless Steel)

• Plate, Baffle (Carbon Steel)

• Plate, Baffle (304 Stainless Steel)

• Weld, L. H. Handle (Carbon Steel)

• Weld, L. H. Handle (304 Stainless Steel)

PARTS LIST FOR HYDRAULIC MOTOR DRIVEN UNITS

PART. NO. QTY. DESCRIPTION

00002-296-15

ITEM

-----

Extended Hydraulic (Steel) Spinner Assy.

Extended Hydraulic (304SS) Spinner Assy.

00002-296-16

-----

00119-092-01

00119-092-02

04101-119-00

00119-085-00

00115-722-01

00115-722-02

00107-080-00

00107-080-01

• Weld, Spinner Frame (Carbon Steel)

• Weld, Spinner Frame (304 Stainless Steel)

• Motor, Hydraulic

62787

-----

62789

62790

62791

62792

• Weld, Shaft

• Bracket, Motor Mount (Carbon Steel)

• Bracket, Motor Mount (304 Stainless Steel)

• Bushing

• Bushing, (304 Stainless Steel)

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTENDED SPINNER ASSEMBLY

DANGER

CAUTION

16 REF.

17 REF.

DETAIL- A

DETAILS - A

12 - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR EXTENDED SPINNER ASSEMBLY

EXTENDED - PARTS ONLY

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

62505

62513

62507

00002-296-02

00002-296-10

00002-296-07

Extended (Steel) Spinner Assy.

Extended (Steel) W/Poly Disc.

Extended (304SS) Spinner Assy.

62574

62793

62057

61180

62146

62356

61164

61187

61181

62273

61182

62272

61183

62275

62313

61232

62007

62006

61196

61156

61157

62358

62780

62331

62781

62782

62783

62333

62784

00115-658-01

00115-658-02

00104-833-00

00104-849-00

04622-033-00

04080-079-00

04080-011-00

00104-956-00

00104-811-00

00104-811-01

00104-810-00

00104-810-01

00104-835-00

00104-835-01

00115-150-00

04011-001-01

04049-045-00

04049-044-00

04031-007-00

04041-085-00

04041-086-00

04091-028-00

00115-165-00

00115-545-01

00115-545-02

00115-579-01

00115-579-02

00115-580-01

00115-580-02

•

Weld, Spinner Frame (Carbon Steel)

Weld, Spinner Frame (304 Stainless Steel)

Shaft, Spinner

Weld, Spinner Disc

Disc, Poly Spinner

N/S

Bearing

• Bearing 1” (Old Style Hopper)

• Bearing Bracket, Weldment (Old Style)

•

Weld, L. H. Baffle (Carbon Steel)

Weld, L. H. Baffle (304 Stainless Steel)

Weld, R. H. Baffle (Carbon Steel)

Weld, R. H. Baffle (304 Stainless Steel)

Weld, Rear Baffle (Carbon Steel)

Weld, Rear Baffle (304 Stainless Steel)

Link Bar, S3

Hairpin Keeper

Decal, Caution

Decal, Danger

Key, 1/4” Sq. x 1”

13b

Sprocket Drive 41 B 13

• Sprocket Drive 41 B 19 (Old Style Hopper)

•

Spring, Compression

Hardware Bag

Weld, R. H. Handle (Carbon Steel)

Weld, R. H. Handle (304 Stainless Steel)

Plate, Baffle (Carbon Steel)

Plate, Baffle (304 Stainless Steel)

Weld, L. H. Handle (Carbon Steel)

Weld, L. H. Handle (304 Stainless Steel)

PARTS LIST FOR HYDRAULIC MOTOR DRIVEN UNITS

PART. NO. QTY. DESCRIPTION

00002-296-08

ITEM

62509

62511

Extended Hydraulic (Steel) Spinner Assy.

Extended Hydraulic (304SS) Spinner Assy.

00002-296-09

62794

62709

62787

62795

62789

62790

62791

62792

00115-720-01

00115-720-02

04101-119-00

00111-283-00

00115-722-01

00115-722-02

00107-080-00

00107-080-01

•

Weld, Spinner Frame (Carbon Steel)

Weld, Spinner Frame (304 Stainless Steel)

Motor, Hydraulic

Weld, Shaft

Bracket, Motor Mount (Carbon Steel)

Bracket, Motor Mount (304 Stainless Steel)

• Bushing

• Bushing, (304 Stainless Steel)

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRIC CONTROLS PARTS & SCHEMATIC

HONDA ACTUATOR

GREY WIRE

THESE CONNECTIONS TO BE SECURED BEHIND PLATE

BROWN

CONNECT TO KILL WIRE FROM ENGINE

BROWN

GREEN

WHITE WIRE

BLACK

LINKAGE ROD

ACTUATOR

GRD

GREEN

BLACK

MOUNTING SCREW HERE

AT ASSEMBLY

WHT

RED

WHT

WHITE IS SECURED UNDER MOUNTING

SCREW USED IN STEP 1B

FUSE HOLDER / W FUSE

POSITIVE FROM BATTERY

AFTER INSTALLATION

COIL CABLE AND SECURE TO TOP OF ENGINE NEATLY

ON ENGINE

RED

SOLENOID

YELLOW

BLUE

TO CENTER TAB ON SOLENOID

YELLOW

(Rear Half)

BLUE

TO CLUTCH POWER WIRE

CLUTCH

(7) CONDUCTOR CABLE

& PLUG

GROUND

(Front Half)

(7) PIN CONNECTOR CABLE & PLUG

WIRING AT THE ENGINE

NOTE: The plug is wired to the cable as indicated on the connector.

(That is; red to red, black to black, etc.)

PARTS LIST

ITEM

PART. NO.

62701

62519

62081

62324

62322

62701

QTY.

DESCRIPTION

00115-717-00

00115-654-00

04150-037-00

00115-180-00

00115-176-00

00115-177-00

Conductor Cable & Plug (Rear)

Conductor Cable & Plug (Front)

Actuator, Linear

Rod, Linkage

Plate, Throttle

Assy., Throttle Plate

(Includes Items 4, 5, & 6)

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRIC CONTROLS PARTS & SCHEMATIC

HONDA ACTUATOR

1 2 3

WIRE HARNESS

SUPPLIED WITH

ACTUATOR

(TWO PIECES)

11 12

BLACK

WHITE

WHITE GROUND WIRE FROM

(7) CONDUCTOR CABLE TO

BE SECURED UNDER MTG.

SCREW

PIVOT ARM

WHITE

BLACK

GREEN

WHITE

RECOMMENDS THAT THESE

CONNECTIONS BE SECURED

SPEED CONTROL STROKE

ASS'Y. COMES WITH HONDA

ENGINE. LOCATED BEHIND

FUEL TANK.

BLACK

CONNECT BROWN WIRE

TO KILL WIRE FROM ENGINE

BROWN

FUSE HOLDER W/FUSE

POSITIVE CABLE FROM BATTERY

8 Pin

ConductorCable

Rear Half

RED

YELLOW

COIL CABLE AND SECURE

TO TOP OF ENGINE NEATLY.

SOLENOID

ON ENGINE

BLUE

TO CENTER STUD ON SOLENOID.

CLUTCH

GROUND

HEAT SHRINK

THIS CONNECTION

8 Pin

ConductorCable

Front Half

(8) PIN CONNECTOR CABLE & PLUG

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

Honda Actuator

Flatwasher, #8 S.S.

62647

62651

62650

62649

62718

62721

62703

62719

62720

62796

62797

62798

62799

62800

62801

62339

62519

62701

04150-043-00

04004-002-59

04003-804-28

04003-069-01

00117-411-00

04150-044-00

00115-177-00

00117-610-00

00117-410-00

04016-001-03

04540-013-02

00117-632-00

04003-186-02

04004-001-23

04004-002-53

04008-007-00

00115-654-00

00115-717-00

Locknut, #8-32 Nylon S.S.

Screw, Machine #8-32 Phil Rd S.S.

Bracket, Actuator Mtg.

Actuator, Honda 12V

N/S

Throttle Plate

Lever, Throttle, Ext, Honda

Linkage, Bosch Act/Honda

Spring Pin 3/32 x 3/8

Grease Dielectric 2 - Gram

Instr. Sheet Honda Act.

Bolt, M5 x 25 HH S.S.

Lockwasher, #10 S.S.

Flatwasher, #10 S.S.

Bushing, Spacer S.S.

Assembly, Control Cable (Front Half)

Assembly includes items 1 thru 11

(Rear Half)

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRIC CONTROLS PARTS & SCHEMATIC

GREY WIRE

BRIGGS ACTUATOR

INSTALL KILL CONNECTION FROM ENGINE HERE

THESE CONNECTIONS TO BE SECURED BEHIND PLATE

BROWN

CONNECT TO KILL SWITCH TAB

BROWN

GREEN

WHITE WIRE

BLACK

LINKAGE ROD

RED WIRE FROM ENGINE

ACTUATOR

GRD

MOUNTING SCREW HERE

AT ASSEMBLY

GREEN

BLACK

WHT

RED

WHT

**_{WHITE IS SECURED UNDER MOUNTING}

FUSE HOLDER / W FUSE

SCREW USED IN STEP 2B

AFTER INSTALLATION

POSITIVE FROM BATTERY

COIL CABLE AND SECURE TO TOP OF ENGINE NEATLY

RED

SOLENOID

YELLOW

BLUE

TO CENTER STUD ON SOLENOID

YELLOW

(Rear Half)

FROM STARTER

BLUE

TO CLUTCH POWER WIRE

CLUTCH

(7) CONDUCTOR CABLE

& PLUG

GROUND

(Front Half)

(7) PIN CONNECTOR CABLE & PLUG

WIRING AT THE ENGINE

NOTE: The plug is wired to the cable as indicated on the connector.

(That is; red to red, black to black, etc.)

PARTS LIST

ITEM PART. NO.

QTY. DESCRIPTION

62169

62168

62081

62181

62172

62173

00113-667-00

00114-165-00

04150-037-00

00113-665-00

00113-664-00

00002-256-00

Conductor Cable & Plug (Rear)

Control Panel w/ Cable (Front)

Actuator, Linear

Rod, Linkage

Plate, Throttle

Kit Cable Operation to Electric

ThrottleConversion Kit (Complete)

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRIC CONTROLS PARTS & SCHEMATIC

BRIGGS ACTUATOR

CONNECT BROWN WIRE

TO KILL WIRE FROM ENGINE

3 4 5

WHITE GROUND WIRE FROM

CABLE. SECURE UNDER

MOUNTING SCREW

WHITE

BLACK

BROWN

WHITE

GREEN

RED

RED WIRE FROM ENGINE

8 Pin

ConductorCable

Rear Half

FUSE HOLDER W/FUSE

POSITIVE CABLE FROM BATTERY

RED

YELLOW

COIL CABLE AND SECURE

TO TOP OF ENGINE NEATLY.

SOLENOID

ON ENGINE

TO CENTER STUD ON SOLENOID.

HEAT SHRINK THIS CONNECTION

CABLE FROM STARTER

BLUE

CLUTCH

GROUND

8 Pin

ConductorCable

Front Half

(8) PIN CONNECTOR CABLE & PLUG

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

62648

62645

62649

62650

62651

62647

62183

62561

62519

00117-256-00

00117-257-00

04003-069-01

04003-804-28

04004-002-59

04150-043-00

04607-013-00

00115-655-00

00115-654-00

Linkage, Throttle

Bracket, Actuator

Screw, Machine #8-32 PHIL RD S.S.

Locknut, #8-32 NYL INS S.S.

Flatwasher, #8 S.S.

Assembly, Actuator

Tie, Nylon 5.5” STD.

Assembly, Control Cable (Rear Half)

Assembly, Control Cable (Front Half)

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROL BOX

MTG. TABS

CHOKE

OFF

START

RED LENS

CONVEYOR

THROTTLE

YELLOW

BLUE

YELLOW

BLUE

RED

BLUE

RED

GREEN

BROWN

RED

YELLOW

BLUE

GREEN

BLACK

GREEN

BROWN

BLACK

RED

21 - 22

WHITE

BROWN

RED

31 - 32 - 33

RED

RIBS THIS SIDE

RED

WHITE

BROWN

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS LIST FOR CONTROL PANEL ASSEMBLY

(62334)

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

Enclosure

Panel, End

Panel, Middle

Switch, START/CONV

Switch, Choke HI/LO

Switch, ON/OFF

Conn., double M/FM

62150

62151

62152

62153

62154

62155

62156

62158

62159

62161

62162

62163

62164

62165

62671

62672

62673

62674

62675

62676

62677

62678

62679

62680

62177

62178

62179

04622-038-00

04640-026-00

04640-027-00

00114-161-00

00114-162-00

00114-163-00

04638-039-16

04622-039-00

04002-059-04

00113-753-00

00113-756-00

00113-755-00

00113-757-00

00113-754-00

04638-102-00

04638-105-00

04616-016-00

04616-037-00

04616-039-00

04616-022-00

04616-040-00

04616-021-00

04616-038-00

04638-045-06

04003-061-04

04003-801-01

04004-001-01

.333

Enclosure, Back Panel

Screw, #8 x 1/2 SM SLT HWH ZP

Jump Wire, 14 Ga., BLUE 3”

Jump Wire, 14 Ga., BROWN 5.5”

Jump Wire, 14 Ga., RED 4”

Jump Wire, 14 GA., BROWN 3”

Jump Wire, 14 Ga., RED 3”

Receptical, Sq. Flange

Connector, Socket, 14 Ga., Tin

Wire, 14 Ga., White Insulated

Wire, 14 Ga., Black Insulated

Wire, 14 Ga., Red Insulated

Wire, 14 Ga., Brown Insulated

Wire, 14 Ga., Green Insulated

Wire, 14 Ga., Blue Insulated

Wire, 14 Ga., Yellow Insulated

Terminal Insulated Disc. Female

Screw, #4-40 x 1/2 Slt Rd HD

Nut, #4-40 Hex ZP

Lockwasher, #4 Med Split ZP

NOT SHOWN:

00115-654-00

62519

Cable, 7 Pin (Front Half)

Download from Www.Somanuals.com. All Manuals Search And Download.

22"

Download from Www.Somanuals.com. All Manuals Search And Download.

AUXILARY COMPONENTS

PARTS LIST

ITEM

PART. NO.

QTY.

DESCRIPTION

61148

62316

00115-166-01

00115-166-02

Inverted Vee (Carbon Steel)

Inverted Vee (Stainless Steel)

62114

62115

00112-127-01

00112-127-02

Weldment, Screen (7 Ft. Unit)

Weldment, Screen (8 Ft. Unit)

62111

62112

00002-177-01

00002-177-02

6” Extension (Carbon Steel - 7 Ft. Unit) Kit

6” Extension (Stainless Steel - 7 Ft. Unit) Kit

62194

62145

00002-177-04

00002-177-05

6” Extension (Carbon Steel - 8 Ft. Unit) Kit

6” Extension (Stainless Steel - 8 Ft. Unit) Kit

PARTS LIST FOR SHIPPING CARTON

62545

PARTS LIST

ITEM

PART. NO.

62547

QTY.

DESCRIPTION

04046-016-06

00115-667-00

00107-662-00

00115-191-00

00115-662-00

04616-075-00

00112-710-00

00115-654-00

04540-013-01

Chain, Roller

Bag, Hardware

Instruction Package (Briggs & Stratton)

Instruction Package (Honda)

Panel, Control

Cable, Stop Lamp

Bracket, Mounting

Cable, 8 Pin (Front Half)

Grease, Dielectric

62802

62803

62804

62334

62738

62166

62519

62806

Download from Www.Somanuals.com. All Manuals Search And Download.

NAME PLATE INFORMATION

• When ordering parts or requesting information or assistance, always include the information listed

below.

• The Model Number and Serial Number for the Spreader are shown on the Name Plate.

• The space below is provided as a convenient place to record these numbers; just fill in the blanks.

Model No. ___________________________________________________________

Serial No. ___________________________________________________________

Date Purchased _____________________________________________________

Purchased From _____________________________________________________

Phone No. For Service _______________________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

SPREADER ONE YEAR WARRANTY

WARRANTY SERVICE

Meyer Products (“Meyer”) and Diamond Equipment (“Diamond”)

warrants to the original purchaser only that it will repair, or, at the

sole option of Meyer or Diamond, replace any part of the new

Meyer or Diamond covered product which proves to be defective

in workmanship or material under normal use for a period of one

year from the date of delivery to the original purchaser. This

warranty is not transferable or assignable. The original

purchaser’s sole and exclusive remedy against Meyer or Diamond

and Meyer’s or Diamond’s sole obligation for any and all claims,

whether for breach of contract, warranty, tort (including

negligence) or otherwise shall be limited to providing, through its

Distributor/Sub Distributor network, all labor and or parts

necessary to correct such defects free of charge. Any cost

incurred in returning the product to the Distributor/Sub-Distributor

is the responsibility of the original purchaser.

In order to obtain service under this warranty, the original

purchaser must return the Meyer/Diamond claimed defective

product to the Distributor/Sub-Distributor from whom the product

was purchased or to any authorized Meyer or Diamond

Distributor/Sub-Distributor, transportation and freight charges

prepaid. Only Meyer or Diamond Distributor/Sub-Distributors

are authorized to perform the obligations under these warranties.

GENERAL

It is the responsibility of the original purchaser to establish the

warranty period by verifying the original delivery date. A bill of

sale, cancelled check or some other appropriate payment record

may be kept for that purpose. It is recommended, but not

required, that the consumer verify the original delivery date by

immediately returning the attached Warranty Registration Card.

No person is authorized to change this warranty or to create any

warranty other than that set forth herein. This warranty gives

you specific legal rights and you may also have other rights

which vary from state to state.

The gasoline engine used in this product is covered by its own

warranty as provided by the engine manufacturer. A copy of this

warranty is included with the engine.

EXCLUSIONS

THIS WARRANTY DOES NOT COVER PAINT, EXCEPT

EXPENDABLE PARTS SUCH AS PINS, SPREADER FINS, AND

OTHER NORMAL WEAR ITEMS. MEYER OR DIAMOND SHALL

NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES ARISING FROM ANY CLAIMS

ARISING HEREUNDER, OR FOR DAMAGES RESULTING FROM

LACK OF NECESSARY MAINTENANCE, OR FROM MISUSE,

ACTS OF GOD, ALTERATION OF A MEYER OR DIAMOND PLOW,

SPREADER OR PART, OR FROM USE OF PARTS OR HYDRAULIC

FLUID NOT SUPPLIED BY MEYER OR DIAMOND. USE OF THE

MEYER OR DIAMOND SNOWPLOW, SPREADER FOR ANY

PURPOSE OTHER THAN PLOWING SNOW OR SPREADING

APPROVED MATERIAL ARE EXAMPLES OF AN ABUSE AND

MISUSE.

Meyer Products

18513 Euclid Avenue

Cleveland, Ohio 44112

Phone (216) 486-1313

Fax (216) 486-3073

E-Mail [email protected]

Diamond Equipment

6 Angell Lane

Damariscotta, Maine 04543-9801

Phone (207) 563-2226

Fax (207) 563-2229

E-Mail [email protected]

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE.

In order to validate this warranty, please complete this card and mail it.

Name: ______________________________________________________

Address: ______________________________________________________

______________________________________________________

Spreader Model: _______________ Serial No.: ____________________

Installation Date: _________ Purchased From: ____________________

Download from Www.Somanuals.com. All Manuals Search And Download.

Postage

Required

Meyer Products

18513 Euclid Avenue

Cleveland, Ohio 44112-1084

Download from Www.Somanuals.com. All Manuals Search And Download.

La Crosse Technology Portable Radio Weather History Interval User Manual
Lennox Hearth Outdoor Fireplace 36 EODC User Manual
Lenovo Computer Monitor 40Y7443 User Manual
Linear Security Camera D5 User Manual
Link electronic Stereo Receiver PDC 888 User Manual
LOREX Technology Computer Monitor SG17LD User Manual
Macsense Connectivity Network Card MPC 200 User Manual
Melissa Bread Maker 643 042 User Manual
Melissa Microwave Oven ED8525S F User Manual
Metrologic Instruments Scanner MS9530 Series User Manual