LevelOne Network Card WUA 0605 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Thank you for purchasing the LevelOne WUA-0605 N_Max Wireless USB Adapter.  
The WUA-0605 is a 802.11n compliant Wireless Adapter which is designed to be both affordable,  
and offer fast speeds of up to 300 Mbps.  
It is designed for the Home and SOHO user who needs enhanced range and performance, while  
the WPA2 wireless encryption ensures that the data transmitted is secured.  
The detachable antenna also gives users the flexibility to add a higher gain antenna which allows  
for a customizable boost in performance.  
Package Contents  
The Wireless USB Adapter package includes the following.  
WUA-0605  
Quick Installation Guide  
CD Manual / Utility  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Wireless USB Adapter Overview  
Wireless USB Adapter has the USB interface, LED and WPS button below.  
Interface  
USB Interface: Connect the USB Interface to a USB port on your computer.  
LED Description  
The LED stays lighted to indicate WLAN link established and active.  
WPS Button  
WPS Button: Press this button to do WPS with AP.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Wireless USB Adapter Installation  
The following instructions will guide you to through the process of installing the Wireless USB  
Adapter.  
Windows XP / Vista / 7 Setup  
Note: Screen captures shown in this guide are from Windows XP. Unless mentioned, there are no  
differences in Vista.  
1. Insert the CD into the CD-ROM drive on your PC.  
2. The autorun program should start automatically.  
If it does not, please run autorun.exe under your CD-ROM drive  
3. In the autorun screen, click Utility to begin the software installation.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Select your desired language, and then click “Next” to start the installation.  
5. Click “Next” to continue.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Click “Install”  
7. The WUA-0605 Driver and Utility is being installed.  
In Windows Vista, the follow message may  
appear. Please click “Install this driver software anyway.”  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Please click “Finish” and restart your computer.  
9. After your computer has restarted, the WUA-0605 Utility icon will appear in your taskbar.  
Note: The red cross over the icon indicates the USB Adapter is not plugged in.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Now insert the Wireless USB Adapter into your computer’s USB port.  
The “Found New Hardware Wizard” will appear.  
11. Follow the prompts until you see that the WUA-0605 has been successfully installed.  
Windows XP  
Windows Vista  
12. Device installation is now complete.  
You can now use the Utility to connect to your wireless network.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making a Basic Wireless Network Connection  
Step 1:  
Double click the LevelOne WUA-0605 Wireless LAN Utility on your Windows desktop.  
Step 2:  
Click the "Available Network" button to scan for available access points.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3:  
Double click on the SSID of Wireless access point or router that you are going to connect to.  
In the example, we want to connect to WBR-6800.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4:  
Enter the wireless security encryption method and key for the access point you are connecting to.  
For maximum security, LevelOne recommends WPA2-PSK (AES).  
Note: Use of WEP or WPA (TKIP) will force the wireless connection to connect at legacy 802.11g  
speeds.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5:  
Now you are ready to use the wireless network for Intranet and Internet connection.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction to the Wireless LAN Utility  
Note: These instructions uses Windows XP as the presumed operation system. Some functions  
are not supported in Windows 98SE or Windows ME.  
Double click the LevelOne WUA-0605 Wireless LAN Utility on your Windows desktop to start the  
Utility  
When the utility is opened, you will see the following checkboxes at the bottom.  
Checkboxes  
Functions  
Show Tray Icon To disable or enable to show the utility icon on your system tray, which is in the  
notification area at the lower-right corner of the windows desktop.  
Radio Off  
To disable or enable to prevent this adapter form transmitting or receiving  
signals.  
Disable Adapter To disable or enable the wireless adapter.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
General  
After starting the utility, the general page pops up This General tab provides the information of your  
current wireless network connection.  
Functions  
Status  
Check if the device associated to target network.  
The current connection speed  
Speed  
Type  
Infrastructure or Ad-Hoc mode.  
Encryption  
SSID  
The encryption mode for connecting to current network profile.  
The SSID (network name) of the connected wireless network.  
Indicates the signal strength.  
Signal Strength  
Link Quality  
Network Address  
Indicates the link quality.  
Shows the current IP addresses settings.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Profile  
The Profile tab lists the preferred connections. You can click the buttons beside to do configure  
each connection.  
Functions  
Add  
To add a connection profile.  
Remove  
Edit  
To remove a connection profile.  
To modify the configurations for a profile.  
To make a copy of a profile.  
Duplicate  
Set Default  
To select a profile as your default wireless connection.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Available Network  
This Available Network tab lists the reachable wireless network.  
Functions  
Refresh  
To rescan available Wireless Networks.  
Add to Profile  
To add an available Wireless Network to your profile list.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Status  
The Status tab shows the current connection status.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Statistics  
The Statistics tab shows the transmission activity record. Clicking the " Reset " button recounts  
the values from zero.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wi-Fi Protected Setup (WPS)  
An easy and secure setup solution for Wi-Fi networks.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Push Button Config (PBC) Method  
If both the Wireless Router / Access Point and the Wireless USB Adapter has a physical button or  
software button for Push Button Config (PBC), please follow steps below to complete the WPS.  
Step 1:  
First press the WPS button on your Wireless Router / Access Point.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2:  
Click on "Push Button Config (PBC)" button.  
You can also push the physical button on the device.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4:  
The Utility will now pair the Router/AP and USB Adapter.  
When paired successfully, wireless encryption security will be applied to the connection.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WPS PIN Code Method  
You will need to set the same PIN code on both the Wireless Router / Access Point and the USB  
Adapter.  
Step 1:  
Check the PIN code assigned by the Wireless LAN Utility  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2:  
Enter your Router / Access Point’s Web Interface and set the WPS settings as Registrar and use  
the PIN code assigned in the Wireless LAN Utility.  
Screen Capture is from LevelOne Router  
Different models/brands will have varying configuration screens.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3:  
Now press the “Pin Input Config (PIN)” Button.  
Step 4:  
Select “Yes” if you want to select your Router / Access Point.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4:  
Select the desired Router / AP Name and then click on " Select " button.  
Step 6:  
The Wireless LAN Utility will start pairing process.  
When paired successfully, wireless encryption security will be applied to connection.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Session Overlap  
If there is more then one AP on the PBC mode, there will be [Session Overlap].Please using PIN  
method or wait for a while and push the button again.  
TimeOut  
If you see the message below while doing WPS!! Please retry again!  
Wireless LAN Utiliy appears twice  
The Wireless LAN Utility may appear twice when using Windows Vista.  
Please reboot your computer to fix this error.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Krups Coffeemaker KM7000 User Manual
Lantronix Server UDS2100 User Manual
Lenovo Laptop 10069 7760 User Manual
Lexmark Printer 131 User Manual
Liebherr Refrigerator 7082 133 00 User Manual
Life Fitness Treadmill ST55 Treadmill User Manual
Melissa Electric Shaver 638 149 User Manual
Metra Electronics Car Stereo System 99 5719 User Manual
Middleby Cooking Systems Group Oven UB 6T User Manual
Midland Radio Two Way Radio PL5161 Series User Manual