Features:
Radio Controlled Alarm Clock
•
•
•
•
•
•
•
•
•
•
•
•
WWVB radio controlled time and date
12 or 24 hour time display
Indoor temperature reading (°F/°C user selectable)
Two independent alarm times
Snooze interval setting from 0 (off) to 59 minutes
Calendar display (weekday/month/date or month/date/year)
Time zone map for continental United States
Time zone selectable –1 hour to –12 hour or Greenwich Mean Time (GMT)
LCD back light
Manual time setting option
Daylight savings time ON/OFF option
Low battery indicator
Introduction:
Congratulations on purchasing this Radio Controlled Alarm Clock. Welcome to
the world of radio controlled time-keeping technology. We hope you will enjoy
the convenience of never having to set your clock again and having the
confidence of knowing exactly what time it is. This innovative clock is ideal for
home or office use and is loaded with many features. Please read this
instruction manual to enjoy the full benefits of all the features.
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Radio Controlled Alarm Clock has five easy to use
function keys:
Use of keys:
SET:
•
Enter the programming mode.
•
•
Select and confirm settings while in programming mode.
Toggle between displaying seconds, calendar, alarm times
or temperature.
SNOOZE Bar
MODE/+:
•
Change or select value while in programming mode.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢄꢆ ꢇꢀꢄꢈꢈꢉꢂ
ALM1/HOUR: • Enter the alarm setting mode for alarm 1.
•
•
•
•
•
•
Set Alarm 1 on/off
Set hour while in alarm set mode
Enter the alarm setting mode for alarm 2
Set Alarm 2 on/off
Set minute while in alarm set mode
While alarm is sounding, turns off alarm for set time (or off if
set to 0)
ALM2/MIN:
SNOOZE:
ALM1/Hour key
•
Turns on back light for LCD (automatic turnoff)
SET key
ALM2/Minute key
MODE/+ key
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Manual time setting: This is not necessary unless the alarm clock did not
pick up a signal upon start up and it is not favorable to wait overnight for
time set. If the time is manually set, be sure to set the time to the correct
AM/PM time.
Programming Mode
1) Press the SET key to enter programming mode.
2) Time Zone: Press the MODE/+ key to change the time zone.
a) Press the MODE/+ key to set the hour. Press the SET key.
b) Press the MODE/+ key to set the minute. Press the SET key.
c) Press the MODE/+ key to set the year. Press the SET key.
d) Press the MODE/+ key to set the month. Press the SET key.
e) Press the MODE/+ key to set the day. Press the SET key.
f) Press the MODE/+ key to set the weekday. Press the SET key.
g) Press the MODE/+ key to set 12- or 24-hour mode. Press the SET key.
a)
b)
c)
Default upon starting is Eastern (-5 GMT)
Can be set to –1 to –12 hour and GMT
The US map will highlight the time zones set within continental
United
States (Eastern (-5), Central (-6), Mountain (-7), Pacific (-8)) or
“GMT” will be displayed if set to GMT (0).
Press the SET key
d)
e)
6) Temperature Selection: Press the MODE/+ key to select °F (Fahrenheit)
or °C (Celsius). Press the SET key. The programming mode is complete.
3) DST: Press the MODE/+ key to switch Daylight Savings Time off or on. The
WWVB automatically corrects for DST; “DST” is to be set to “OFF” only in
areas that do not follow DST. Press the SET key.
4) Snooze: Press the MODE/+ key to select the desired snooze length from 0
to 59 minutes. Default is 10 minutes; 0 is no snooze (pressing the
SNOOZE bar turns off the alarm). Press the SET key.
Alarm Setting Mode
1) Press the ALM1 or ALM2 key for two seconds to enter the Alarm 1 or Alarm
2 setting mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press the ALM1/HOUR key to set the alarm hour.
3) Press the ALM2/MIN key to set the alarm minute.
4) Exit this mode by pressing the SNOOZE bar or waiting for 15 seconds.
Ionosphere, reception is very limited during daylight hours. Your alarm clock
will search for a signal every night when reception is best. The WWVB radio
station derives its signal from the NIST Atomic clock in Boulder, Colorado. A
team of atomic physicists continually measures every second of every day to
an accuracy of ten billionths of a second a day. These physicists have created
an international standard, measuring a second as 9,192,631,770 vibrations of
a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB
transmitter. Your Radio Controlled Alarm Clock cannot receive signals from
other transmitters in the world (Germany’s DCF 77, Japan’s JG2AS, or
England’s MSF-60). Outside the United Sates, the alarm clock will keep time
as a precision quartz clock.
Alarm is activated when ((1)) or ((2)) is displayed to the right of the map. To
activate/deactivate an alarm, press the ALM1 or ALM2 key briefly.
Display Modes
Your alarm clock can be set to display (underneath the US map) either the
seconds, calendar, alarm 1 time, alarm 2 time or indoor temperature.
1) Press the MODE/+ key to change the display function.
2) The display will toggle through the options.
Troubleshooting
The Radio Controlled Alarm Clock is designed to be simple to operate yet
offer a complete range of features. Some common questions are listed below.
Q: I inserted a battery, but the time did not set; what’s wrong?
A: In many areas of the country a signal cannot be received during daylight
hours due to the interference of the sun. By leaving the clock alone, a
signal will be found during the night and the alarm clock will be set to the
General Information on WWVB Radio Controlled Time
The NIST radio station, WWVB, is located in Ft. Collins, Colorado and
transmits the exact time signal continuously throughout the United States at
60 kHz. The signal can be received up to 2,000 miles away through the
internal antenna in your alarm clock. However, due to the nature of the Earth’s
Download from Www.Somanuals.com. All Manuals Search And Download.
absolutely correct time and date by the next morning. When a signal is
received, the radio tower icon is displayed to the left of the US map. If no
signal is received, there will be no tower icon.
Q: After the clock set itself, why does it show the wrong hour?
A: The time zone is not set correctly. Look on the LCD map to see if the
proper time zone is highlighted. If not, follow the “Programming Mode”
section.
Q: Why hasn’t my alarm clock picked up a signal?
A: Short-term interference can be caused by storms between you and
Colorado during reception time. There is interference between the Alarm
Clock and the signal from Colorado. Be sure to keep the alarm clock at
least six feet from any electrical device (computers, television sets, other
radio-controlled clocks, etc.). Avoid placing alarm clock on metal surfaces.
The ideal location for signal reception is in a window facing Colorado.
Q: What does “DST ON/OFF” mean?
A: Some parts of the country do not follow Daylight Savings Time (Arizona
and parts of Indiana). Since the WWVB signal includes the correction for
this, these areas must have the DST OFF.
Care and Maintenance
Q: Can I set the time and date without waiting for a signal?
A: Yes; simply follow the “Programming Mode” directions.
•
•
Extreme temperatures, vibration and shock should be avoided as these
may cause damage to the unit and could give inaccurate readings.
Use a soft, dry cloth to clean alarm clock. Do not use solvents as they may
mark the LCD and case.
Do not expose alarm to water or high humidity.
Immediately remove low powered battery to avoid leakage and replace with
one fresh AA LR6 battery.
Q: How often does the alarm clock synchronize with the WWVB?
A: The Alarm Clock searches for a signal immediately after inserting a
battery. After an initial signal is received, the alarm searches for a signal
starting at 12:00 AM (midnight) every night and synchronizes at that time.
•
•
•
Do not attempt to repair your alarm clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Change
Specifications:
Time Source/Frequency
Temperature measuring range
:
:
WWVB/60 kHz
•
•
•
It is recommended to replace the battery on an annual basis to ensure
optimum accuracy or when the battery icon indicates low running power.
When replacing the battery, be sure to leave battery out for at least one
minute to allow complete reset.
-21.8°F to +155.9°F
(-29.9°C to +68.8°C)
0.2°F (0.1°C)
Temperature resolution
Temperature checking interval
Power source
Battery life cycle
Dimensions (L x W x H)
:
:
:
:
:
Every 10 seconds
Place battery firmly in compartment to ensure proper contact.
1 x AA, IEC LR6, 1.5V Alkaline
Approximately 12 months
3.70 x 3.50 x 1.91 in
(95 x 90 x 49 mm)
Download from Www.Somanuals.com. All Manuals Search And Download.
For warranty work, technical support, or information, contact La Crosse Technology at:
Radio controlled Alarm Clock
Horloge radio-commandée
Despertador Controlado por emisiones de Radio
La Crosse Technology, Ltd
2809 Losey Blvd. S.
La Crosse, WI 54601
Phone: 608.782.1610
Fax: 608.796.1020
Instructions Manual
Manual de instrucciones
Livret d'instructions
e-mail:
(warranty work)
Canada
(information on other products)
Mountain Time
(-7h GMT)
Central Time
Pacific Time
(-6h GMT)
web:
(-8h GMT)
Eastern Time
(-5h GMT)
United States
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
Mexico
1.
2.
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|