OWNER'S MANUAL
GROOVE 410H
Congratulations on the purchase of your new Kustom bass guitar speaker cabinet!
Your new GROOVE 410H has been designed to offer exceptional sound quality and
long-term performance reliability. Inside this manual you’ll find detailed information
regarding the cabinet’s features. We wish you many years of enjoyment with your
Kustom GROOVE 410H.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
2
MODEL: GROOVE 410H
IMPEDANCE: 8 OHMS
POWER: 500 WATTS RMS
SENSITIVITY:95dB 1W/1M
4
5
3
6
2
1
7
8
+1 tip, -1 sleeve
INPUT/OUTPUT
+1 and -1 used
10
12
16
0
HORN ATTENUATION dB
Designed by Kustom Inc. Cincinnati, Ohio
MADE IN CHINA
XXXX-XXXXXX
1
3
1 Horn Attenuator:
3 Speaker Input/Output:
This is a “volume” control for the
horn. To disable the horn, turn the
knob counter clockwise until the
indicator reaches :. To set the horn
for maximum output, turn the knob
clockwise until the indicator reaches 0.
These jacks can be used as an input
and/or output. They accept standard
Speakond type speaker cables. To
connect a cable: Insert and twist one
quarter turn clockwise until the release
button locks. To remove a cable: Pull
back release button on cable connector,
twist connector counter clockwise one
quarter turn, and pull out connector.
Note: When using these jacks as an
output to another cabinet, refer to the
Amplifier Loading Chart (page 4) for
important amplifier loading information.
2 Speaker Input/Output:
These jacks can be used as an input
and/or output. The jacks accept a
standard ¼” cable. Note: When using
these jacks as an output to another
cabinet, refer to the Amplifier Loading
Chart (page 4) for important amplifier
loading information.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Connection Diagram
(Shown using the Kustom GROOVE 1200 amplifier)
TUNER OUT
GROUND
PRE EQ
1
MODEL: GROOVE 1200
LIFT
POST EQ
BREAKER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DIRECT OUTPUT
EFFECTS LOOP
ATTENTION
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
2001124
SERIAL NUMBER
CAUTION
CHASSIS SURFACE HOT
DESIGNED IN USA
MADE IN CHINA
ATTENTION
SUPERFICE DE CHASSIS CHAUDE
SPEAKER OUTPUT
SEND
RETURN
FOOTSWITCH
Cabinet
Cabinet
A
B
Amplifier Loading Chart
Speaker cabinet
loads (ohms) applied
to the amplifier
Cabinet A’s Impedance (ohms)
open
open
16
8
5.33
5.33
4
3.20
2.67
2.67
2
open
16
16
8
5.33
4.00
3.20
2.67
2.29
2.00
1.60
4
3.20
2.67
2.29
2.00
1.78
1.60
1.33
3.2
2
1.78
1.60
1.45
1.33
1.23
1.14
1.00
16
8
8.00
5.33
4.00
3.20
2.67
2.29
1.78
4.00
3.20
2.67
2.29
2.00
1.78
1.45
2.67
2.29
2.00
1.78
1.60
1.46
1.23
2.29
2.00
1.78
1.60
1.46
1.34
1.14
8
Cabinet
B’s
Impedance
5.33
5.33
4
4
3.20
2.67
2
3.2
2.67
2
Total load on amplifier Note: Refer to amplifier specifications for proper loading
information.
This chart can help you determine what load (ohms) is present on the amplifier when using multiple cabinets.
- To use this chart with two cabinets (A and B), find cabinet A’s impedance (ohms) column and cabinet B’s
impedance row on the chart. The total load on the amplifier is shown in the box where they meet. For example: If
cabinet A’s impedance is 8 ohms and cabinet B’s impedance is 4 ohms, the total load on the amplifier would be 2.67
ohms.
- To use this chart with three or more cabinets, find the total load for two cabinets and then use the result for
cabinet A’s impedance column. The third cabinet will then be used for cabinet B’s impedance row on the chart.
Find the total load on the amplifier and repeat if more cabinets are used. For example (using 3 cabinets): If the first
cabinet (cabinet A) has an impedance of 16 ohms and the second (cabinet B) has an impedance of 8 ohms, the
total load would be 5.33 ohms. Using this load (5.33) as cabinet A’s impedance and a third cabinet’s (new cabinet
B) impedance of 4 ohms, you would find that the total load on the amplifier is 2.29 ohms. Note: It is not
recommended to use any combination of cabinets that has a resulting load in a shaded area of the chart.
Alternate Connection Diagrams
TUNER OUT
TUNER OUT
GROUND
PRE EQ
GROUND
LIFT
PRE EQ
1
MODEL: GROOVE 1200
MODEL: GROOVE 1200
LIFT
POST EQ
POST EQ
BREAKER
BREAKER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DIRECT OUTPUT
EFFECTS LOOP
DIRECT OUTPUT
EFFECTS LOOP
ATTENTION
ATTENTION
RISQUE DE CHOC ELECTRIQUE-NE
PAS OUVRIR
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
2001124
2001124
SERIAL NUMBER
SERIAL NUMBER
CAUTION
CHASSIS SURFACE HOT
CAUTION
CHASSIS SURFACE HOT
DESIGNED IN USA
MADE IN CHINA
ATTENTION
SUPERFICE DE CHASSIS CHAUDE
DESIGNED IN USA
MADE IN CHINA
ATTENTION
SUPERFICE DE CHASSIS CHAUDE
SPEAKER OUTPUT
SEND
RETURN
FOOTSWITCH
SPEAKER OUTPUT
SEND
RETURN
FOOTSWITCH
8 Ohms
8 Ohms
8 Ohms
8 Ohms
=
8 Ohms
8 Ohms
8 Ohms
8 Ohms
Total Load On Amplifier = 2 Ohms
Total Load On Amplifier = 2 Ohms
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GROOVE 410H
Specifications
Model
Input Power
Groove 410H
500 Watts
Bass guitar speaker cabinet
RMS
Impedence
8 Ohms
Speakers
4 X 10"
Specially Designed Eminence Speakers
Sensitivity per speaker
95dB 1W at 1 meter
Average sensitivity 35-5Khz using factory test conditions
Frequency Response
Dimensions
40HZ-15kHz
System Response
mm/kg
820 (Height) x 617 (Width) x 510 (Depth), 46.4 kg
Inches/Pounds
32.25 (Height) x 24.25 (Width) x 20.125 (Depth), 102.3 lbs
Speakon Cable
Caster Plate
3 meter Speakon speaker cable
Plywood with swivel casters
Accessories Included
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EC Declaration of Conformity
We:
Kustom Musical Amplification Inc.
4940 Delhi Pike
Cincinnati, OH 45238
Tel: 1-513-451-5000 Fax: 1-513-347-2192
Declare that the product
Product name:
Kustom
Product model number:
GROOVE 410H
to which this declaration relates is in conformity with the following standards;
EN55013 (A12) : 1995
Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and
associated equipment.
EN55020: 1995
Electromagnetic immunity of broadcast receivers and associated equipment.
Limits for harmonic current emissions (equipment input current < 16A per phase).
EN61000-3-2: 1995
EN61000-3-3: 1995
Limitation of voltage fluctuations and flicker in low voltage supply systems for equipment with
rated currents < 16A.
EN55103-1: 1995
EN60065: 1994
Electromagnetic Compatibility - Product family standard for Audio, Video Audio-visual and
entertainment Lighting Control Apparatus.
Safety requirements for main operated electronic and related apparatus for household and similar
general use.
Following the provisions of EU Council Directive(s): 72/73 EEC and 89/336/EEC.
We the undersigned, hereby declare that the equipment specified above conforms to the aforementioned directive(s).
Name of authorized person: Rick Kukulies, VP Engineering
Signature:______________________
Date: 05 June 2001
Kustom Musical Amplification Inc. (BC Rich)
4940 Delhi Pike
Cincinnati, OH 45238
Tel: 1-513-451-5000 Fax: 1-513-347-2192
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|