MTV-34/51/68
Use and Care Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFEGUARDS & SAFETY
Important Safeguards
When using electrical appliances, in order to reduce
the risk of fire, electric shock, and/or injury to persons,
basic safety precautions should always be followed.
•
This appliance is not intended for use in bathrooms,
laundry areas or similar moist locations. Never locate
this appliance in the immediate surroundings of, or
where it may fall into, a bath, basin, washtub, shower
or swimming pool.
•
•
•
Do not run the power cord under carpeting. Arrange
the supply cord away from traffic areas and where it
will not become a trip hazard.
For your Safety
Read all instructions carefully even if you feel you are
quite familiar with the appliance.
To disconnect the appliance, turn appliance off,
switch off power outlet and remove plug from power
outlet.
•
•
•
•
This appliance is not intended for use by young
children or infirm persons without supervision.
Do not abuse supply cord. Never carry the appliance
by the supply cord. Never yank the supply cord from
the power outlet; instead, grasp the plug and pull
to disconnect. Keep supply cord away from heated
surfaces.
Young children should be supervised to ensure that
they do not play with the appliance.
This appliance should be placed on a flat, stable
surface before it is operated.
•
•
Do not operate the appliance with a damaged supply
cord or plug or after the appliance malfunctions,
has been dropped or damaged in any way. Consult
an authorised service facility or similarly qualified
person for examination.
Total darkness or a reflection on the picture tube
can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
•
•
•
INDOOR USE ONLY - this appliance is not intended
for outdoor use.
When cleaning the picture tube face, turn off
television and remove plug from power outlet. Using
a dry cloth, wipe the television ensuing that no dust
or lint enters any vents.
Do not expose this appliance to rain or moisture. Do
not immerse.
Do not place items filled with liquids, such as
vases, on the appliance. Do not expose appliance to
dripping or splashing liquids.
•
•
This product has not been designed for any other
uses other than those specified in this booklet. This
product is intended for household use only.
•
•
•
Do not place naked flame sources, such as candles,
on the appliance.
All television receivers are high voltage instruments.
Your PICTURE TUBE is highly evacuated. If
broken, glass fragments will be violently expelled.
Scratching, chipping, or putting undue pressure
on the tube is dangerous and should be avoided.
During thunder and lighting, unplug the power
cord and antenna cord to prevent your TV set from
damage. All ‘inside work’ on your receiver should be
performed by an authorised repair agent.
Do not locate the appliance near heat sources such
as radiators, heaters, air ducts or direct sunlight.
Do not block any of the ventilation openings.
Ensure that vents are not covered by newspapers,
tablecloths, curtains, etc. Do not install in a tight
fitting cabinet.
•
Do not insert or allow foreign objects to enter any
grille openings.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
Specifications
Thank you very much for your purchase of this product.
To enjoy your set to the full from the very beginning,
read this manual carefully and keep it handy for ready
reference.
Installation
Locate the receiver in the room where direct light does
not strike the screen. Total darkness or a reflection on
the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
Allow enough space between the receiver and the wall
to permit proper ventilation. Avoid excessively warm
locations to prevent possible damage to the cabinet
or premature component failure. This TV receiver can
be connected to 240 Voltage, 50Hz AC only. Never
connect to DC supply or any other power supply. Do
not install the receiver in a location near heat sources
such as radiator, air ducts, direct sunlight, or in a closed
compartment and or area.
Compulsory Warning
Caution
If the supply cord is damaged it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
•
•
•
•
DO NOT OPEN - DO NOT ATTEMPT TO REPAIR,
DISASSEMBLE OR MODIFY THIS APPLIANCE.
DANGEROUS HIGH VOLTAGES EXIST INSIDE THIS
APPLIANCE.
THIS APPLIANCE IS ONLY TO BE SERVICED BY A
QUALIFIED PERSON.
NO USER-SERVICEABLE PARTS INSIDE.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
QUICK START ....................................................2
SAFEGUARDS & SAFETY .....................................3
PRODUCT FEATURES...........................................4
CONTENTS .........................................................5
LOCATIONS OF CONTROLS ...................................6
OTHER EQUIPMENT ............................................7
BASIC OPERATION..............................................8
SPECS & DEFINITIONS.....................................14
NOTES.............................................................15
WARRANTY......................................................16
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATIONS OF CONTROLS
front panel
MAIN POWER ON/OFF SWITCH
INFRA-RED RECEIVING WINDOW
STAND-BY MODE INDICATOR
MTV51/ MTV 34
MTV68
FRONT AUDIO INPUT
FRONT VIDEO INPUT
VOLUME DOWN
VOLUME UP
TV/AV SELECT
MENU SELECT
PROGRAM UP
PROGRAM DOWN
back panel
VIDEO OUT
VIDEO IN
MTV68
AUDIO IN
AUDIO OUT
AUDIO OUT
AUDIO IN
MTV34/ MTV51
AERIAL TERMINAL
VIDEO IN
VIDEO OUT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER EQUIPMENT
CONNECTION TO OTHER EQUIPMENT
This TV set can be connected to video cassette recorder, video disc player, video camera, game player or
audio player.
VIDEO CASSETTE RECORDER
(RED)
(WHITE)
(YELLOW)
MTV68
MTV34/ MTV51
NOTE:
Video/ Audio equipment can be connected to sockets of AUDIO IN or VIDEO IN in rear.
VIDEO CASSETTE RECORDER
(RED)
MTV68
MTV34/ MTV51
(WHITE)
(YELLOW)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
DESCRIPTION OF OPERATION
You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset,
system and audio (68cm only) according to the menu shown on the screen.
SYSTEM
PICTURE
bright
contrast
colour
sharp
AUDIO (MTV-68 ONLY)
colour-sys auto
45
63
63
63
63
volume
balance
32
00
sound-sys
coring
5.5m
on
tint
---------+-----
---------+-----
PRESET
pos.
CLOCK
0
time
16:00
--:--
--:--
--:--
16:25
10
rem.
on
v-l
on-time
off-time
prompt
ch-time
pos.
band
fine
semi-search
auto-search
---------+-----
AUTO-SEARCH OPERATION
This function will automatically set the channels on 1,2,3,4 . If you wish to set the correct stations on the corresponding
channels see ‘Channel Position.’
1. Press ‘PRE’ button on the remote control to display the preset menu.
2. Press ‘P /P ’ channel button to select AUTO-SEARCH item.
3. Press ‘VOL /VOL ’ volume button to start auto-search.
PRESET
pos.
0
rem.
on
v-l
band
fine
semi-search
auto-search
---------+-----
NOTE: You can store the TV channels from ‘0’ position in numeral sequence. The channel position will be ‘0’ again when
search is finished. The colour of ‘0’ turns green when the program has been searched. Otherwise, it turns red.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset menu operation
channel position
1. Press the ‘PRE’ button on the remote control to
select the ‘PRESET’ page. Every 10 seconds the
present menu will flick off the screen. Continue to
press the ‘pre’ button to re-instate the menu.
5. Press the ‘PRE’ button to select the SEMI-SEARCH
line and then press the ‘VOL ’ or ‘VOL ’ button
until the desired television station reception
is found. If a station is found that is not the desired
station press the ‘VOL ’ or ‘VOL ’ button again until
the desired station is found.
2. When in the ‘PRESET’ mode, use the remote control
‘VOL /VOL ’ buttons to select the number for the
station you want to use on the remote control (eg.:
on the first line marked ‘pos’, select the channel you
wish to set up. Press the channel number on the
remote control till the channel number is displayed
in the ‘pos’ position. If you want to select Channel 9
the number ‘9’ button is pressed. To select a two
digit number, the _ _ button on the remote control
must be pressed first.
6. When all stations are programmed, either wait for
the menu to turn off automatically or keep pressing
the ‘PRE’ button until the menu turns off.
NOTE: When REM. item is set to ‘OFF’ this position will
be skipped while you use ‘P /P ’ buttons to scan the
stored channels.
3. Press the ‘PRE’ button again to select the REM line.
Use the ‘VOL /VOL ’ buttons to toggle the REM On
or Off and select OFF.
PRESET
pos.
0
rem.
on
v-l
band
4. Next press the ‘PRE’ button again to select the
‘BAND’ line and select either VL, VH or UHF
depending on the television station required.
fine
semi-search
auto-search
Channel 2 = VL
Channel 7, 9 & 10 = VH
Channel SBS & 31 = UHF
--+------------
*
Note some areas have all channels on the UHF band.
FINE
SEMI-SEARCH
1. Press PRE button to display the presetting menu.
2. Press ‘P /P ’ button to select SEMI-SEARCH item.
3. Press ‘VOL /VOL ’ button to search the TV
program you want.
1. Press PRE button to display the presetting menu.
2. Press ‘P /P ’ button to select FINE item.
3. Press ‘VOL /VOL ’ button up or down to adjust the
picture and the sound.
PRESET
PRESET
pos.
0
pos.
0
rem.
on
v-l
rem.
on
v-l
band
band
fine
fine
semi-search
auto-search
semi-search
auto-search
--+------------
--+------------
AUTO-SEARCH
PRESET
1. Press PRE button to display the presetting menu.
2. Press ‘P /P ’ button to select AUTO-SEARCH item.
3. Press ‘VOL /VOL ’ button to start auto-search.
All the TV programs received will be stored
automatically.
pos.
0
on
v-l
rem.
band
fine
semi-search
auto-search
--+------------
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK MENU OPERATION
Press the MENU button on the set four times or the CLOCK button on the remote control to display the clock menu.
CLOCK
time
16:00
--:--
--:--
--:--
16:25
10
on-time
off-time
prompt
ch-time
pos.
24 hour clock setting (The clock must be set before you select the other items)
1. Press ‘P /P ’ button to select TIME item.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NB: If you turn off the set at the wall or on the set itself you will have to reset the clock.
on-time and off-time
1. Press ‘P /P ’ button to select ON-TIME or OFF-TIME item. The green colour turns red.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NOTE: When ON-TIME item is set, press POWER button on the remote control. Make sure the TV set is under stand-by mode.
When OFF-TIME item is set, the SLEEP function is cancelled automatically.
prompt (Prompting the time & Presetting the position)
1. Press ‘P /P ’ button to select PROMPT or CH-TIME item. The green colour turns red.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NOTE: Presetting the position: For example, the time is 16:20 and the position is at channel 5 at present. If CH-TIME
is preset at 17:00 and the position is preset to channel 8, the position will change to channel 8 automatically while the
time is 17:00.
Prompt time: The word ‘PROMPR’ will display on the screen and keep on twinkling at the prompt time preset.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu operation
PICTURE
bright
contrast
colour
sharp
45
63
63
63
63
1. Press PRE button on the remote control to display
the picture menu.
2. Press ‘P /P ’ button to select the item.
tint
3. Press ‘VOL /VOL ’ button to select the channel up
or down.
---------+-----
BRIGHT
CONTRAST
COLOUR
SHARP
TINT
NTSC ONLY
SYSTEM MENU OPERATION
SYSTEM
colour-sys auto
Press SYS button on the remote control to display the
system menu.
sound-sys
coring
5.5m
on
COLOUR-SYS
SOUND-SYS
1. Press ‘P /P ’ button to select COLOUR-SYS. item.
The green colour turns red.
1. Press ‘P /P ’ button to select SOUND-SYS. item.
The green colour turns red.
2. Press ‘VOL /VOL ’ button to select 5.5MHZ.
2. Press ‘VOL /VOL ’ button to select AUTO/PAL/
N3.58/N4.43.
CORING (A noise reduction system designed to filter out unwanted noise)
1. Press ‘P /P ’ button to select CORING item. The green colour turns red.
2. Press ‘VOL /VOL ’ button to select ON or OFF.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SELECTION
1. Power Button
3. CHANNEL SELECTION
Press POWER button on the TV set to turn it on.
1. When the channel number has one figure, press the
number directly.
2. When the channel number has two figures,
press ‘ -- ’ button at first. For example, press ‘ -- ’
and then press ‘2’ and ‘5’ to select channel 25.
If the TV set is under stand-by mode when you press the
POWER button on the TV, turn it on by pressing POWER
button on the remote control.
3. When the channel number has three figures, press
‘ -- ’ button two times at first. For example, press
‘ -- ’ two times and then press ‘1’, ‘2’, ‘5’ to select
channel 125.
2. Display button
1. When the ‘display’ button is pressed the colour-
system and the sound-system will be displayed on
the screen and will disappear after 3 seconds.
4. RETURN BUTTON
Press RETURN button recall the last program.
5
PAL
POS
DISP
COLOUR-SYS.
SOUND-SYS.
5.5M
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. channel button
8. SLEEP BUTTON
Press ‘P /P ’ button on the remote control until you
get the channel you want.
You can select from 0 to 120 minutes, after which the
TV will change to stand-by mode automatically.
P
Each time you press the button,
the display changes as follows:
- prog +
CTV Set
--
120
15
105
30
90
45
75
60
9. PICTURE MODE SELECTION
PP
6. TV/AV BUTTON
Press TV/AV button to select TV or AV1 or AV2.
tv/av
TV/AV
Press ‘PP’ button. The display changes
as follows:
CTV Set
STANDARD
PERSONAL
SOFT
LIGHT
VIVID
Note: Select AV2 under S-VIDEO mode.
10. VOLUME/ ADJUST BUTTON
7. MUTE BUTTON
Press ‘VOL /VOL ’ button on the remote control or on
the TV set to adjust the Volume.
Press MUTE button to turn off the sound. Then press it
again to return the sound level as before.
VOL
VOL
-
VOL. +
CTV Set
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECS & DEFINITIONS
NOTE
230~240v AC 50HZ
power
SHOWN ON BACK OF THE TV SET
B/G
power consumption
sound-system
colour-system
antenna
PAL, NTSC
75 ohm
INPUT: 2, OUTPUT: 1
INPUT: 2, OUTPUT: 1
Phono: 1VP 75 ohm
Phono: 500mVrms
video contact
audio contact
INPUT: 1
Y: 1Vp; P:75 ohm
C: 0. 28Vp; P:75 ohm
s-video contact
(MTV68 Only)
34cm ~ 68cm
VL: 1~5
pic. tube meas.
channel
VH: 6~12
(255 channels)
UHF: 13~57
(34cm) : > 1W
(51cm) : > 2W
(68cm) : > 4W
sound output power
Part of the design and the specification may be changed without prior notice.
Term Definitions
NTSC
Enables playback of European/American format tapes.
RCA
Audio/Video connector.
S-Video
Video output for 600+ lines resolution. Suitable for DVD.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
The benefits conferred by this warranty are in addition
to all implied warranties, other rights and remedies in
respect of the product which the consumer has under
the Trade Practices Act and similar State and Territory
Laws.
DO NOT SEND IN THIS WARRANTY
Fill out the following details and file with your purchase
invoice.
RETAIN & FILE WITH YOUR RECEIPT
The original purchaser of this MAGNAVOX product is
provided with the following warranty, subject to the
following conditions.
Your Purchase Receipt/ Invoice is proof of date of
purchase. You must be able to present it at the place
of purchase to obtain a replacement or service under
warranty.
Prosignal Pty Ltd warrant this product for a period of 12
months from the date of purchase for all parts defective
in workmanship or materials. The product or defective
parts will be replaced free of charge.
Prosignal Pty Ltd reserves the right to discontinue
items, modify designs and change specifications without
incurring obligation. Whilst every effort is made to
ensure that descriptions, specifications and other
information in this publication is correct, no warranty is
given in respect thereof and the company shall not be
liable for any errors therein.
Warranty Conditions
1. This warranty is only valid for appliances used
according to the manufacturer’s instructions.
2. This appliance must not be modified or changed in
any way.
Purchased from:
Co. Name:
3. Connection must be to the voltage requirements as
specified in the ratings label located on the product.
4. The manufacturer does not accept liability for
any direct or consequential damage, loss or other
expense arising from misuse or incorrect installation
and operation of the appliance.
Address:
Date of Purchase:
5. Warranty will only be given where proof of purchase
is provided, e.g. original invoice or receipt.
6. Not designed or warranted for industrial or
commercial use.
Note: consistent with our continuing
product development policy, improvements
may have been made which render the
contents of this package slightly different
to that shown.
Cat. No. MTV-34/51/68
December 2002
Product of Prosignal Pty Ltd.
ABN: 41 087 711 626
Head Office: 324 Frankston-Dandenong Road,
Dandenong South, Victoria, Australia 3175
Download from Www.Somanuals.com. All Manuals Search And Download.
|