WARRANTY
This KOOLATRON product is warranted to the retail consumer for 90 days from
date of retail purchase, against defects in material and workmanship.
WHAT IS COVERED
- Replacement parts and labor.
- Transportation charges to customer for the repaired product.
Induction
Cooktop
WHAT IS NOT COVERED
- Commercial or industrial use of this product.
- Damage caused by abuse, accident, misuse, or neglect.
- Transportation of the unit or component from the customer to Koolatron.
IMPLIED WARRANTIES
Any implied warranties, including the implied warranty of
merchantability are also limited to duration of 90 days from the date
of retail purchase.
WARRANTY REGISTRATION
receipt with this manual.
WARRANTY AND SERVICE PROCEDURE
If you have a problem with your unit, or you require replacement parts, please
telephone the following number for assistance:
North America
1-800-265-8456
Koolatron has Master Service Centres at these locations:
Koolatron USA
4330 Commerce Dr.
Batavia, NY
14020-4102
U.S.A.
Koolatron Canada
27 Catharine Ave.
Brantford, ON
N3T 1X5
CANADA
A Koolatron Master Service Centre must perform all warranty work. Service
after warranty may be obtained at a Master Service Centre or at an authorized
service dealer. Purchase Receipt is required to establish warranty eligibility.
TCIS11BN
Instruction Manual
H1S121
02/2010-v1
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACEMENT
OPERATION
• Place the cooktop on a stable and level non-metallic surface making
sure that it is not flammable surface (e.g. table cloth, carpet, etc.).
• Do not block the ventilation slots of the induction cooktop. Keep a
minimum distance of 5” from walls and other objects, appliances, etc.
• Do not place the induction cooktop next to devices or objects that
react sensitively to magnetic fields (e.g. radios, TVs, computers,
etc.).
NOTE: this cooktop has a touch control panel with the latest safety
features. In order to press a button, with the tip of your finger, tap once.
The button will not react, if sliding finger over it or press too gently. This
is a safety feature that prevents children from turning the cooktop on
easily, and also enables you to wipe off spills from the cooking surface
without accidentally pressing any buttons.
• Do not place the induction cooktop next to open fires, heaters or other
sources of heat.
- Plug the power cable into a properly installed outlet. ON/OFF light turns
on.
• Make sure that the power cord is not damaged or compressed beneath
the induction cooktop and does not come into contact with sharp
edges or hot surfaces.
• Prior to connecting the induction cooktop, check whether the voltage
indicated in this manual corresponds to the voltage supply in your
home. A wrong connection may lead to damage to the induction
cooktop and possible injury to persons.
• The cooktop’s surface is made of temperature-resistant glass. In the
event that damage to the unit is observed, even if it is only a small crack
on the glass surface, disconnect the induction cooktop from the power
supply immediately and contact our customer service department by
calling 1 800 265- 8456
- To turn the power on, press the ON/OFF button once. The power light
will turn a steady red and heating will begin.
- To select the proper heat setting, press the “-” or “+” until the desired
heat setting is achieved. The heating levels are 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, default factory setting is 5.
- To select temperature setting, press the TEMPERATURE button once,
the temperature light will turn a steady red, and press the “-” or “+” until
the correct temperature setting is achieved. The temperature levels are
150, 180, 210, 240, 270, 300, 330, 360, 390, 420, 450°F, default factory
setting is 270°F.
- To select automatic timer setting, press the TIMER button twice (default
factory setting is 0 mins), the timer light will turn a steady red, and press
the “+” until the desired timer setting is achieved. When the timer is
at 150 mins, the LED will show error code EE, will emit a sound for
5 second, and the unit returns to the standby mode.
COMPATIBLE POTS AND PANS
Steel or cast iron, enameled iron, stainless steel, flat-bottom pans/pots
with diameter of 12 to 26 cm (4.7” to 10.25”).
NON-COMPATIBLE POTS AND PANS
- The power will completely shut off with 9 second if either (a) the wrong
type of cookware is applied or (b) no cookware is placed on the unit.
- Once you have finished cooking, press the ON/OFF button once to turn
the cooktop off. The fan will keep functioning for some time to cool the
unit down. Once the fan has stopped, unplug the unit. Make sure you
wait for the unit to cool off completely before cleaning & storing.
Heat-resistant glass, ceramic container, copper, aluminum pans/pots.
Rounded-bottom pan/pots with the base measuring less than 12cm
(4.7”).
NOTE: Many high quality cookware are made of non-magnetic stainless
steel and cannot be used with the induction cooktop. If in doubt, please
try a magnet to check your cookware.
TIMER
If using the unit in TEMP or HEAT function, not setting the TIMER
function, but when the unit is used for 150 mins, the LED display shows
EE code and sound. The unit will stop automatically.
If using the unit in TEMP or HEAT function for 10 mins, and then set the
TIMER, the max Timer is 140 mins. During timer operation, you can
change the duration at any time with the “-” & “+” buttons.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
ERROR CODE CAUSE AND SOLUTION
• Remove the power plug and let cool prior to cleaning the induction
cooktop.
• Never immerse the induction cooktop, its cables or the plug into any
liquids.
• Wipe off the glass cooktop with a damp cloth or use a mild, non-abra-
sive soap solution. Do not use any caustic cleaning agents and make
sure that water does not penetrate inside the induction cooktop.
• Wipe off the casing and the operating panel with a soft cloth using a
mild detergent.
• Do not use any oil based cleansing products in order not to damage the
plastic parts or the casing/operating panel.
• Do not use any flammable, acidic or alkaline materials or substances
near the induction cooktop, as this may reduce the service life of the
induction cooktop and pose a fire risk when the induction cooktop is
turned on.
• In order to keep your cooktop looking new, make sure that the bottom
of your cookware does not scrape the glass surface, although a
scratched surface will not impair the use of the induction cooktop.
• Make sure to properly clean the unit before storing it in a cool, dry place.
E1
E2
E3
Voltage is under 85V
Voltage is over 145V
The accessory and spare parts are damaged, please
contact the nearest authorized service facility for
trouble shooting, repair and adjustment.
E4
E5
E6
The accessory and spare parts are damaged, please
contact the nearest authorized service facility for
trouble shooting, repair and adjustment.
The accessory and spare parts are damaged, please
contact the nearest authorized service facility for
trouble shooting, repair and adjustment.
The cooking temperature is over 450°F in the function
mode “TEMPERATURE“. After the unit has been
cooled down, the unit would be automatic switches to
standby mode.
TROUBLESHOOTING
E7
EE
Ventilation blocked, heat is not released from the
machine smoothly, it causes device inside over-heat.
Please keep a minimum distance of 5 to 10 cm from
the device to walls or other items. Please power off to
eliminate the wrong record and let the unit cool down,
and then re-plug the power cord and restart the unit.
If the cooktop detects an internal / external error or a wrong connection,
it will display the error message with a code number on the display panel
and the cooktop will stop functioning. These code numbers will allow you
identify the cause of the error and help you find the solution to the prob-
lem. If the problem has been solved the error message will disappear and
you will be able to continue using your cooktop. If the error persists, and
you cannot determine the cause of the error and correct it, contact our
customer service department by calling 1 800 265- 8456.
The total cooking Timer reaches 150 mins. After reaching
150 mins, the LED shows “EE” and sound, the device
automatically goes into standby mode. Please press
ON/OFF button to restart the unit.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|