Kenwood Two Way Radio KCH 14 User Manual

HANDHELD CONTROL HEAD  
KCH-16  
INSTRUCTION MANUAL  
THANK YOU  
We are grateful you have chosen Kenwood for your mobile applications.  
We believe this easy-to-use handheld control head will provide dependable  
communications to keep personnel operating at peak efficiency.  
© B62-2101-00 (M)  
Use of the KCH-16/ transceiver while you are driving may be  
against traffic laws. Please check and observe the vehicle  
regulations in your area.  
Display  
q Power  
switch  
Press to switch the transceiver ON. Press and hold for  
approximately 1 second to switch the transceiver OFF.  
Do not use options not specified by Kenwood.  
w Display  
e Right (Zone Up)  
Press to increase the zone number (Default setting). Also press to  
Only basic operations are explained in this instruction manual. For a detailed  
explanation on the operations, refer to the Transceiver's instruction manual  
.
key  
UNPACKING AND CHECKING EQUIPMENT  
Note: The following unpacking instructions are for use by your Kenwood  
dealer, an authorized Kenwood service facility, or the factory.  
increase setting adjustments.  
FEATURES  
r Left (Zone Down)  
Press to decrease the zone number (Default setting). Also press to  
key  
The KCH-16 is a full-control optional microphone for use with the  
TK-5710/ 5810 P25/ FM analog Dual Mode transceiver.  
Indicator  
Description  
Carefully unpack the Handheld Control Head. We recommend that  
you identify the items listed in the following table before discarding  
the packing material. If any items are missing or have been damaged  
during shipment, file a claim with the carrier immediately.  
Displays the operating zone and channel  
numbers or zone and channel names. Also  
displays various text messages depending on  
the function being used.  
Displays various characters depending on  
dealer settings.  
Appears when a received call is using optional  
signaling.  
Appears when the Monitor function is active  
and when the transceiver squelch is open.  
decrease setting adjustments.  
By connecting the KCH-16 to the optional KRK-11 handheld  
control head interface kit, you can control the transceiver using  
the microphone in the same way that the KCH-14/15 can be used.  
t VOL (Volume) control  
Rotate clockwise to increase the volume level. Rotate  
counterclockwise to decrease the volume level.  
Supplied Accessories  
NOTICES TO THE USER  
y DTMF keypad  
Item  
Part Number  
J19-5482-XX  
B62-2101-XX  
Quantity  
1 set  
1
Government law prohibits the operation of unlicensed transmitters within  
the territories under government control.  
Press the keys on the keypad to make DTMF calls.  
The default setting is None (no function).  
Hanger  
(with 4 x 16 mm self-tapping screws)  
Illegal operation is punishable by fine and/or imprisonment.  
Refer service to qualified technicians only.  
Instruction manual  
u Up (Channel Up)  
key : PF 6 (Programmable Function)  
key  
Appears when you are using Scan mode.  
Press to increase the channel number (Default setting).  
Your dealer can also enable the CH key to be used when making  
setting adjustments, as an optional method for using the Right  
key.  
One or more of the following statements may be applicable:  
FCC WARNING  
SPECIFICATIONS  
Appears when the external speaker function is  
activated.  
Appears when the Scrambler or Encryption  
function is activated.  
Appears when the AUX A function has been  
activated.  
Appears when the AUX B function has been  
activated.  
Appears when the AUX C function has been  
activated.  
Appears when using the Operator Selectable  
Tone function.  
Appears when there is a FleetSync message  
stored in the transceiver memory. Flashes  
when a new FleetSync message has arrived.  
Appears when the selected zone (left icon) or  
channel (right icon) is added to the scanning  
sequence.  
Operating temperature range  
Microphone impedance  
-30℃ +60℃  
This equipment generates or uses radio frequency energy. Changes or  
modifications to this equipment may cause harmful interference unless  
the modifications are expressly approved in the instruction manual. The  
user could lose the authority to operate this equipment if an unauthorized  
change or modification is made.  
2.2 kΩ (Max)  
58 × 125 × 31.5 mm  
2.3 × 4.9 × 1.2 inches  
i Down (Channel Down)  
key :PF 7 (Programmable  
without projections  
Function) key  
Dimensions (W × H × D)  
68 × 125 × 36 mm  
2.7 × 4.9 × 1.4 inches  
Press to decrease the channel number (Default setting).  
Your dealer can also enable the CH key to be used when making  
setting adjustments, as an optional method for using the Left  
key.  
with projections  
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE  
FCC  
Cable not included Approx. 185 g / 6.5 oz  
Cable included Approx. 280 g / 9.9 oz  
Weight  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation.  
o S/A/B/C/Orange (Programmable Function) keys  
Press to activate their programmable functions.  
The default setting is None (no function).  
This equipment generates, uses and can generate radio frequency energy  
and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is  
no guarantee that the interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
GETTING AQUAINTED  
Handheld Control Head  
! TX/ BUSY indicator  
12  
The TX/ BUSY indicator lights red while transmitting and green  
while receiving.  
PTT (Push-To-Talk) switch  
Appears when the Auto Recording function on  
the VGS-1 option is activated.  
Appears when the Auto Reply Message on the  
VGS-1 option is activated. (The location of this  
icon is the same as the Auto Recording icon.)  
Press and hold this switch, then speak into the microphone to call  
a station.  
Reorient or relocate the receiving antenna.  
HOOK  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
9
The numbers of bars indicates the strength  
of incoming signals. The antenna plus 3 bars  
represents a strong signal while only the  
antenna represents a weak signal. No antenna  
means no signal is present.  
Key name (function) comparison  
(in regards to the KCH-14/ KCH-15)  
Consult the dealer for technical assistance.  
10 Microphone  
KCH-14  
KCH-15  
KCH-16  
1
2
PRECAUTIONS  
Observe the following precautions to prevent fire, personal injury,  
and KCH-16/ transceiver damage.  
GRP  
GRP  
GRP  
(Zone Up)  
Right (Zone Up)  
(Zone Up)  
(Zone Up)  
GRP GRP  
(Zone Down) (Zone Down)  
Flashes when out of range.  
GRP  
(Zone Down)  
Left (Zone Down)  
Do not drop the KCH-16; strong impacts can damage the internal  
components.  
CH (Channel CH(Channel  
Up/Down)  
11  
9
CH (Channel)  
OPERATION  
Up/Down)  
Do not over stress the KCH-16 cable by pulling on it with  
excessive force.  
MON  
(Monitor)  
SCN (Scan)  
PF 1  
1
Hold the KCH-16 approximately 3 ~ 4 cm (1.5 inches) from your  
mouth when speaking.  
4
7
8
MON (Monitor)  
SCN (Scan)  
3
5
Do not attempt to configure the KCH-16/ transceiver while driving;  
it is too dangerous.  
2
To hang the KCH-16, use the hook provided on its reverse side.  
PF 1 (None) PF 1 (None) S (None)  
PF 2 (None) PF 2 (None) A (None)  
PF 3 (None) PF 3 (None) B (None)  
PF 4 (None) PF 4 (None) C (None)  
PF 5 (None) PF 5 (None) Orange (None)  
PF 6 (None) Up (Channel Up)  
PF 2  
PF 3  
PF 4  
PF 5  
PF 6  
Do not disassemble or modify the KCH-16/ transceiver for any  
reason.  
6
Do not expose the KCH-16/ transceiver to long periods of direct  
sunlight, nor place it near heating appliances.  
If an abnormal odor or smoke is detected coming from the  
KCH-16 or transceiver, switch the KCH-16/ transceiver power off  
immediately, and contact your Kenwood dealer.  
Down (Channel  
Down)  
PF 7  
PF 7 (None)  
PF 8  
PF 9  
PF 8 (None)  
PF 9 (None)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Invacare Scale RSC600 User Manual
JBL Speaker SCS2007 User Manual
Jenn Air Range 8113P754 60 User Manual
Jensen TV DVD Combo FPE1908DVDC 19 User Manual
JVC Digital Camera GR D350U User Manual
JVC Speaker System RV NB70B User Manual
Keys Fitness Home Gym A7e User Manual
KitchenAid Microwave Oven KBHS109S User Manual
KitchenAid Oven KDRP407 KDRP462 User Manual
Kodak Digital Camera Z81612 User Manual