Kenwood Car Video System KDV MP765 User Manual

KDV-MP735

KDV-MP765

DVD-RECEIVER

INSTRUCTION MANUAL

COMPACT

DIGITAL VIDEO

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety precautions

2WARNING

2CAUTION

To prevent injury or fire, take the

following precautions:

• Insert the unit all the way in until it is fully locked

in place. Otherwise it may fall out of place when

jolted.

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not open the top or bottom covers of the unit.

• When extending the ignition, battery, or ground

wires, make sure to use automotive-grade wires

or other wires with a 0.75mm² (AWG18) or more

to prevent wire deterioration and damage to the

wire coating.

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)

inside the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not set the removed faceplate or the faceplate

case in areas exposed to direct sunlight, excessive

heat or humidity. Also avoid places with too much

dust or the possibility of water splashing.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

Kenwood dealer.

• To prevent deterioration, do not touch the

terminals of the unit or faceplate with your

fingers.

• Make sure not to get your fingers caught between

the faceplate and the unit.

• Do not subject the faceplate to excessive shock,

as it is a piece of precision equipment.

• Be careful not to drop the unit or subject it to

strong shock.

The unit may break or crack because it contains

glass parts.

• Do not touch the liquid crystal fluid if the LCD

is damaged or broken due to shock. The liquid

crystal fluid may be dangerous to your health or

even fatal.

If the liquid crystal fluid from the LCD contacts

your body or clothing, wash it off with soap

immediately.

• When replacing a fuse, only use a new one with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse,

first disconnect the wiring harness.

• Do not place any object between the faceplate

and the unit.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

Do Not Load 3-in. DVD/CDs in the DVD/

CD slot

If you try to load a 3 in. DVD/CD with its adapter

into the unit, the adapter might separate from the

DVD/CD and damage the unit.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety precautions

Available Discs

NOTE

You can play back the following types of disc on

this unit.

• If you experience problems during installation,

consult your Kenwood dealer.

• DVD-Video discs

The KDV-MP735 will playback any disc whose

region number is "

The KDV-MP765 will playback any disc whose

region number is "

• DVD-R discs (recorded in the standard DVD-Video

disc format)

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed. (See 'Initializing', page

29.) If the unit still fails to operate properly after

the Reset button has been pressed, contact your

local KENWOOD dealer for assistance.

" (or " ").

ALL

" (or " ").

ALL

��

�

��

�

• VCD discs (Video CDs)

��

�

��

• Marked music CDs

(including

�

��

�

the finalized CD-R/RW discs)

• CD-ROM/R/RW discs (recorded in the formats

listed on Page 6)

Reset button

• Characters in the LCD may become difficult to

read in temperatures below 41 ˚F (5 ˚C).

•

A DVD-R or CD-R/RW disc may not be played back due to

its recording status.

Also, the disc not finalized yet cannot be played back.

(For finalizing processing, see the Instruction Manual of

your recorder or writing software.)

This player has been designed to play back the DVD

software which has been encoded for specific region

areas. It cannot play back the DVD software encoded for

other region areas than the region areas for which it has

been designed. (page 5)

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on

the display on the actual equipment, and some

of the illustrations on the display may represent

something impossible in actual operation.

•

Lens Fogging

Right after you turn on the car heater in cold

weather, dew or condensation may form on the

lens in the Disc player of the unit. Called lens

fogging, Discs may be impossible to play. In such

a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does

not operate normally after a while, consult your

Kenwood dealer.

Unavailable Discs

All of DVD-ROM, DVD-RAM, DVD-RW, DVD+R/RW,

HQ-VCD and Photo CDs cannot be played back.

See the "Available Discs" section.

Restrictions due to difference between

discs

Some DVD and VCD discs can be played only in

certain playback modes according to the intentions

of the software producers. As this player plays discs

according to their intentions, some functions may

not work as intended by you. Please be sure to read

the instructions provided with each disc. When

an inhibition icon is displayed on the monitor, it

indicates that the disc being played is under the

restriction as described above.

Inhibition icon

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Cleaning the Unit

Region codes in the world

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe neutral detergent off.

The DVD players are given a region code according

to the country or area it is marketed, as shown in

the following map.

•

Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

Cleaning the DVD/CD Slot

As dust tends to accumulate in the DVD/CD slot,

clean it every once in a while. Your DVD/CDs can

get scratched if you put them in a dusty DVD/CD

slot.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and

The marking of products using lasers

(Except for some areas)

CLASS 1

LASER PRODUCT

other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

The label is attached to the chassis/case and says

that the component uses laser beams that have

been classified as Class 1. It means that the unit

is utilizing laser beams that are of a weaker class.

There is no danger of hazardous radiation outside

the unit.

Manufactured under license from Dolby

Laboratories.

"Dolby" and the double-D symbol are trademarks

of Dolby Laboratories. Confidential Unpublished

rights reserved.

"DTS" and "DTS Digital Surround" are trademarks of

Digital Theater Systems, inc.

is a trademark of DVD Format/Logo

Licensing Corporation registered in the U.S., Japan

and other countries.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on playing MP3

Note, however, that the MP3 recording media and

formats acceptable are limited. When writing MP3,

pay attention to the following restrictions.

Entering file and folder names

When entering file and folder names, use the

alphanumeric characters described above only.

If you use any other character for entry, the file and

folder names are not displayed correctly. They may

neither be displayed correctly depending on the CD

writer used.

Acceptable media

The MP3 recording media acceptable to this unit

are CD-ROM, CD-R, and CD-RW.

When using CD-RW, do full format not quick format

to prevent malfunction.

The unit recognizes and plays only those MP3

which have the MP3 extension (.MP3).

Acceptable medium formats

The following formats are available for the media

used in this unit. The maximum number of

characters used for file and folder name including

the delimiter (".") and three-character extension are

indicated in parentheses.

• ISO 9660 Level 1 (12 characters; Up to 11

characters are displayed)

•

A file with a name entered with characters not on the

code list may not play correctly.

Writing files into a medium

When a medium containing MP3 data is loaded,

the unit checks all the data on the medium. If the

medium contains a lot of folders or non-MP3 files,

therefore, it takes a long time until the unit starts

playing MP3.

• ISO 9660 Level 2 (31 characters; Up to 11

characters are displayed)

In addition, it may take time for the unit to move to

the next MP3 file or a File Search or Folder Search

may not be performed smoothly.

• Joliet (64 character; Up to 11 characters are

displayed)

For a list of available characters, see the instruction

manual of the writing software and the section

Entering file and folder names below.

MP3 written in the formats other than the above

may not be successfully played and their file names

or folder names are not properly displayed.

Loading such a medium may produce loud noise to

damage the speakers.

•

Do no attempt to play a medium containing a non-MP3

file with the MP3 extension.

The unit mistakes non-MP3 files for MP3/WMA data as

long as they have the MP3 extension.

Do not attempt to play a medium containing non MP3.

Settings for your MP3 encoder and CD

writer

Do the following setting when compressing audio

data in MP3 data with the MP3 encoder.

•

• Transfer bit rate:

MP3: 8 —320 kbps

• Sampling frequency

MP3: 16, 22.05, 24, 32, 44.1, 48 kHz

When you use your CD writer to record MP3 up

to the maximum disc capacity, disable additional

writing. For recording on an empty disc up to the

maximum capacity at once, check Disc at Once.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 playing order

When selected for play, or for File Search, files and

folders are accessed in the order in which they were

written by the CD writer.

When a File Search is executed with file ¡$

being played ...

Operation of

(Current file: ¡$)

the button

Because of this, the order in which they are

expected to be played may not match the order

in which they are actually played. You may be able

to set the order in which MP3 are to be played by

writing them onto a medium such as a CD-R with

their file names beginning with play sequence

numbers such as "01" to "99", depending on your

CD writer.

4 Button

Beginning of file ¡$  ¡#

¢ Button

¡%  ¡&

For example, a medium with the following folder/

file hierarchy is subject to File Search as shown

below.

Example of a medium’s folder/file hierarchy

��

�

��

�

��

�

��

English

Download from Www.Somanuals.com. All Manuals Search And Download.

About DVD/CDs

Handling Discs

• Don’t touch the recording surface of the Disc.

Removing Discs

When removing Discs from this unit pull them out

horizontally.

Discs that can’t be used

• Discs that aren’t round can’t be used.

• CD-R and CD-RW are easier to damage than a

normal music CD. Use a CD-R or a CD-RW after

reading the caution items on the package etc.

• Don’t stick tape etc. on the Disc.

Also, don’t use a Disc with tape stuck on it.

• Discs with coloring on the recording surface or

that are dirty can’t be used.

• A DVD-R, CD-R or CD-RW that hasn’t been

finalized can’t be played. (For the finalization

process refer to your DVD-R/CD-R/CD-RW writing

software, and your DVD-R/CD-R/CD-RW recorder

instruction manual.)

When using a new Disc

If the Disc center hole or outside rim has burrs, use

it after removing them with a ball pen etc.

Disc storage

Burrs

• Don’t place them in direct sunlight (On the seat

or dashboard etc.) and where the temperature is

high.

Burrs

• Store Discs in their cases.

DVD/CD accessories

Don’t use disc type accessories.

Disc cleaning

Clean from the center of the disc and move

outward.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Icons on the DVD discs

Indicates the region code where the disc can

be played.

ALL

Number of voice languages recorded with

the audio function. The number in the icon

indicates the number of voice languages. (Max.

8 languages)

Number of subtitle languages recorded with

the subtitle function. The number in the icon

indicates the number of subtitle languages. (Max.

32 languages)

Number of angles provided by the angle function.

The number in the icon indicates the number of

angles. (Max. 9 angles)

Aspect ratios that can be selected. "LB" stands for

Letter Box and "PS" for Pan/Scan. In the example

on the left, the 16:9 video can be converted into

letter box video.

16:9 LB

English

Download from Www.Somanuals.com. All Manuals Search And Download.

General features

��

�

��

�

��

�

��

�

��

�

��

�

��

MUTE indicator

��

LOUD indicator

Power

Volume

Turning ON the Power

Increasing Volume

Press the [PWR] button.

Turn the [VOL] knob clockwise.

Turning OFF the Power

Decreasing Volume

Press the [PWR] button for at least 1 second.

Turn the [VOL] knob counterclockwise.

Mute

Selecting the Source

Mutes (or cuts) the sound level temporarily.

Press the [SRC] button.

Press the [MUTE] button.

Each time the button is pressed the Mute turns

ON or OFF.

Source required

Tuner

DVD/ VCD/ CD-DA/ MP3

Auxiliary input

Display

"TUNER"

"DVD"

When it’s ON, the "MUTE" indicator blinks.

"AUX IN"

•

Video images are outputted in the DVD source mode

only. The front video output produces video images

when the parking brake is set correctly.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Control

Switching Display

Switching the information displayed.

1 Select the Audio item for adjustment

Press the [AUD] button.

Press the [DISP] button.

Each time the button is pressed the display

switches as shown below.

Each time the button is pressed the items that

can be adjusted switch as shown below.

In Tuner source

2 Adjust the Audio item

Rotate the Rotary Volume knob.

Information

Frequency

Clock (It is displayed 5 seconds only.)

•

When operation stops for 5 seconds, the Audio

Control mode closes.

In DVD/VCD/CD-DA/MP3 source

In Tuner, DVD (2 channel mode), or Auxiliary

input source

Information

Play time & Track number

Clock (It is displayed 5 seconds only.)

Disc type (It is displayed 5 seconds only.)

Adjustment Item Display

Range

Bass level*

Treble level*

Balance

Fader

Loudness

"Bass"

–7 — +7

Left 9 — Right 9

Rear 9 — Front 9

ON/OFF

"Treble"

"Balance"

"Fader"

"Loud"

In Auxiliary input source

Information

Auxiliary input

Clock (It is displayed 5 seconds only.)

USER/ SOFT/ HARD/ SHARP/

CINEMA

Sound

"Sound"

Volume

"Volume"

00 — 40

•

You can change the "Play time" by the procedure of

'Switching Time Display for Discs' (page 21).

•

* Can be used only when you have set the "Sound"

item to "USER".

The LOUD indicator lights when you turn the

Loudness control On.

No sound is outputted from the center speaker and

the subwoofer.

In DVD (6 channel mode) source

Adjustment Item Display

Range

Front left level

Center level

"FrontL"

"Center"

"FrontR"

"RearL"

"RearR"

"SUB W"

"Volume"

–10 — +10

00 — 40

Front right level

Rear left level

Rear right level

Subwoofer level

Volume

•

Before adjusting the volume of each speaker,

complete the procedure of 'Setting the Speaker setup'

(page 26).

Sound may not be outputted due to the setting

conditions. Please see Section, ‘Select audio output

channel’ (Page 17).

English

Download from Www.Somanuals.com. All Manuals Search And Download.

General features

Adjusting Clock

1 Select the clock display

Press the [DISP] button.

2 Enter clock adjustment mode

Press the [DISP] button for at least 1 second.

The clock display blinks.

3 Select an item you wish to adjust.

Press the [2] or [3] button.

4 Set the clock time.

Press the [5] or [∞] button.

Repeat Steps 3 and 4 to adjust the clock.

5 Exit clock adjustment mode

Press the [DISP] button.

•

When operation stops for 5 seconds, the clock

adjustment mode closes.

Faceplate Angle Adjustment

You can adjust the front panel angle for easy

viewing.

1 Enter faceplate angle adjustment mode

Press the [ANG] button for at least 1 second.

"Angle Adj" is displayed.

2 Adjust the Faceplate Angle

Press the [ANG] button.

•

When operation stops for 5 seconds, the faceplate

angle adjustment mode closes.

Do not apply excessive force to the faceplate. It can

cause damage.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner features

��

� ��

��

�

��

�

��

�

��

�

��

�

��

� � �

�

Band display

Preset station number

Frequency display

��

ST indicator

LO.S indicator

SCN indicator

Tuning

Manual Tuning

Selecting the station.

1 Enter manual tuning mode

Press the [4] or [¢] button for at least 1

1 Select tuner source

Press the [SRC] button.

Select the "TUNER" display.

second.

2 Tune up or down band

Press the [4] or [¢] button.

2 Select the band

Press the [BAND] button.

Each time the button is pressed it switches

between the FM1, FM2, FM3, AM1, and AM2

bands.

•

When operation stops for 5 seconds, the manual

tuning mode closes.

When you start another operation (band switching,

volume control or others), the Manual Tuning mode is

released.

3 Tune up or down band (Auto tuning)

Press the [4] or [¢] button.

•

During reception of stereo stations the "ST" indicator

is ON.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner features

Station Preset Memory

Scan Tuning

Putting the station in the memory.

Tunes the receivable stations one by one every

approximately 5 seconds.

1 Select the band

Press the [BAND] button.

1 Select the band

Press the [BAND] button.

2 Select the frequency to put in the memory

Press the [4] or [¢] button.

2 Start Scan Tuning

Press the [ENT./£] button.

When it’s ON, "SCN" indicator is ON.

3 Put the frequency in the memory

Press the desired [1] — [6] button for at least

1 second.

On each band, 1 station can be put in the

memory on each [1] — [6] button.

3 When you have tuned the desired station

Press the [ENT./£] button.

Local Seek

Auto Memory Entry

Only stations whose reception is good are

searched for in auto seek tuning.

Putting stations with good reception in the

memory automatically.

Press the [LO.S] button for at least 1 second.

Each time the button is pressed the Local Seek

turns ON or OFF.

1 Select the band for Auto Memory Entry

Press the [BAND] button.

When it’s ON, "LO.S" indicator is ON.

2 Open Auto Memory Entry

Press the [AME] button for at least 1 second.

When you reach the end of frequency band, the

Auto Memory Entry completes automatically.

Preset Tuning

Calling up the stations in the memory.

1 Select the band

Press the [BAND] button.

2 Call up the station

Press the desired [1] — [6] button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

IN indicator

��

REP indicator

SCN indicator

RDM indicator

Eject the disc

Playing DVD, VCD, CD-DA and MP3

1 Eject the disc

When there is no disc inserted

Press the [0] button.

1 Open the panel to insert disc

Press the [0] button.

2 Return the panel to the original position

Press the [0] button.

2 Insert a disc.

•

3 in. (8cm) disc can’t be played. Using an adapter and

inserting them into this unit can cause damage.

Video images are outputted in the DVD source mode

only. The front video output produces video images

when the parking brake is set correctly.

•

When the faceplate has been slid open, it might

interfere with the shift lever or something else. If this

happens, pay attention to safety and move the shift

lever or take an appropriate action, then operate the

unit.

•

The MP3 media that this unit can play are CD-ROM,

CD-R, and CD-RW.

When a disc is inserted the "IN" indicator is ON.

The medium formats must be ISO 9660 Level 1,

Level 2, or Joliet. The methods and precautions to be

followed for writing MP3 data are covered in 'Notes

on playing MP3' (page 6). Check that section before

creating your MP3 media.

When a disc is inserted

Press the [SRC] button.

Select the "DVD" display.

Pause and play

Press the [PAUSE] button.

Each time the button is pressed the song pauses

or plays.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features

Stopping playback

Track/Chapter/File Search

Press the [4] or [¢] button.

1 Stopping playback

Press the [STOP] button.

Disc

DVD

Searching for a chapter

—

Searching for a track

Searching for a file

VCD/ CD-DA/ MP3

Stop to play.

VCD[PBC ON]

VCD[PBC OFF], CD-DA

MP3

DVD

Press the button once during playback stops it

and the position where it is stopped is stored in

memory.

•

Press the [STOP] button twice to cancel playback.

No operation is possible depending on disks.

Repeat Play

Press the [REP] button.

2 Resume the play (DVD only)

Press the [ENT./£] button.

Press button under this condition to resume the

play.

Each time the button is pressed the Repeat Play

switches as shown below.

When it’s ON, "REP" indicator is ON.

DVD:

Repeat play

Display/Screen Display

Chapter Repeat

Title Repeat

OFF

"Chapter REP"/"CHAPTER REPEAT ON"

"Title REP"/"TITLE REPEAT ON"

"Normal Play"/"REPEAT OFF"

Fast Forwarding and Reversing

VCD[PBC OFF], CD-DA:

Fast Forwarding

Press the [¢] button for at least 1 second.

Repeat play

Track Repeat

Disc Repeat

OFF

Display/Screen Display

"Track REP"/"REP-ONE"

"Disc REP"/"REP-ALL"

Reversing

Press the [4] button for at least 1 second.

"Normal Play"/"REPEAT OFF"

Each time the button is pressed the Search speed

switches as shown below.

•

When a music CD is loaded, it can be repeated to play

during normal playback.

Setting

2 times

Display

"FF 2X" / "FR 2X"

"FF 4X" / "FR 4X"

"FF 6X" / "FR 6X"

"FF 8X" / "FR 8X"

"PLAY"

MP3:

Repeat play

File Repeat

Folder Repeat

OFF

4 times

6 times

Display/Screen Display

"Track REP"/"REP-ONE"

"Disc REP"/"REP-ALL"

8 times

Normal play

"Normal Play"/"REPEAT OFF"

•

Audio output of DVDs and video CDs is disabled

during fast-forward and fast-rewind. Audio output of

audio CDs is disabled at the 6×, 8×-speed operation.

Canceling Fast Forwarding / Reversing

Press the [ENT./£] button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Random Play (VCD, CD-DA)

Select audio output channel

Play all the songs on the disc in random order.

You can set the mixed output at 2-channel stereo

port or the separate output of each channel.

Press the [RDM] button.

Each time the button is pressed Random Play

turns ON or OFF.

When it’s ON, "Track RDM" is displayed.

Press the [2-6CH] button for at least 1 second.

Setting

Display

"Stereo"

"Full 6CH"

2 channel (stereo) mode

6 channel mode

•

When the [¢] button is pressed, the next song

select starts.

When used for a video CD during play with PBC ON,

the PBC is turned Off.

•

The audio of each channel is output as shown on the

next table depending on your setup and playback

audio. (The sound is output only when marked by

symbol "" on the table.)

Track Scan (VCD, CD-DA)

Playing the first part of each song on the disc you

are listening to and searching for the song you

want to listen to.

2 channel mode

 



Play the 2-channel audio in the 6-channel

mode with Dolby Pro-Logic function Off.

Play the 2-channel audio in the 6-channel

mode with Dolby Pro-Logic function On. *

Play the 6-channel audio in the 6-channel

mode.

   

1 Start Track Scan

Press the [SCN] button.

"Track SCAN" is displayed. Scan starts from the

first track.

* When you have set the "FRONT" and "REAR" or

"CENTER" item to "SMALL" by 'Setting the Speaker

setup' (page 26).

The 2-channel audio is a linear PCM, a music CD, and

an MP3 audio sound.

When it’s ON, "SCN" indicator is ON.

2 Release it when the song you want to listen

to is played

Press the [SCN] button.

The 6-channel audio is a DVD’s 5.1-ch Dolby digital

sound and a DTS audio sound.

•

When used for a video CD during play with PBC ON,

the PBC is turned Off.

•

When you have set the "FRONT," "CENTER," "REAR" and

"SUBWOOFER" items to "OFF" or "NONE" by 'Setting

the Speaker setup' (page 26), no sound is output by its

speaker.

For Dolby Pro-Logic function setup, see the "PRO

LOGIC" section of 'Setting the Audio setup' (page 25).

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features

MP3 Folder List (MP3)

MP3 Play Mode (MP3)

Select a folder or a file you wish to play.

Select a playback mode.

1 Stops to play

Press the [STOP] button.

1 Stops to play

Press the [STOP] button.

Folder list

File list

Play mode

The selected item is displayed as the

pressed button.

2 Moves to a play mode selection

Press the [2] or [3] button.

2 Moves to the Folder List

3 Selects a play

Press the [2] or [3] button.

Press the [5] or [∞] button.

3 Selects a folder

Press the [5] or [∞] button.

Display

Setting

"SINGLE"

Pauses after play of a single music.

Repeats to play a single music.

Pauses after play of music in a folder.

Repeats to play music in a folder.

"REP-ONE"

"FOLDER"

"FOLDER REP"

4 Determines the folder

Press the [ENT./£] button.

5 Moves to the File List

Press the [2] or [3] button.

Play the beginning of music on a disc one after

another approximately 10 seconds.

"DISC SCAN"

6 Selects a file

"DISC"

"DISC REP"

(Original setting)

"RANDOM"

Pauses after play of music on a disc.

Press the [5] or [∞] button.

Repeats to play music on a disc.

7 Determines the file

Press the [ENT./£] button.

The file starts to play.

Plays music on a disc in the random sequence.

Plays music of a folder in the random sequence,

and pauses after its play.

"SHUFFLE ON"

4 Moves to the File List

Press the [2] or [3] button.

5 Selects a file

Press the [5] or [∞] button.

6 Determines a file

Press the [ENT./£] button.

Play starts in accordance with selected play

mode.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features of Remote

�

��

�

��

�

��

�

��

�

��

� � �

��

Slow playback (DVD, VCD)

•

You can return to the normal play by pressing the

[ENTER/£] button.

Press the [ ] button.

Each time the button is pressed the Search speed

switches as shown below.

DVD

Setting

Display

"SF 2X"

"SF 4X"

"SF 8X"

"SR 2X"

"SR 4X"

"SR 8X"

"PLAY"

Forward of 1/2 times

Forward of 1/4 times

Forward of 1/8 times

Reverse of 1/2 times

Reverse of 1/4 times

Reverse of 1/8 times

Normal play

Direct Track Search

(VCD, CD-DA, MP3)

Doing Track Search by entering the track/file

number.

Press the number buttons.

•

Press [10+] button to input two digits or more.

VCD

Setting

Display

"SF 2X"

"SF 4X"

"SF 8X"

"STEP BWD"

Forward of 1/2 times

Forward of 1/4 times

Forward of 1/8 times

Pause

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features of Remote

GOTO Search (DVD, VCD, CD-DA)

Using DVD Menu (DVD)

Available in DVDs with title menus/root menus.

1 Enter GOTO mode

Press the [GOTO] button.

1 Enter Top Menu (root menu) mode

Press the [MENU] button.

"DVD MENU" is displayed.

For DVDs, specify the title/chapter number or the

elapsed time of the title.

For VCD and CD-DA, specify the elapsed time of

the disc.

Enter Title Menu mode

Press the [TITLE] button.

"TITLE MENU" is displayed.

2 Select Search mode (DVD only)

Press the [GOTO] button.

Each time the button is pressed the Search mode

switches as shown below.

2 Selecting the menu item

Press the [2], [3], [5] or [∞] button or press

the number buttons.

Search mode

Title/Chapter Search

Time Search

Display

"TITLE **/ ** CHAPTER **/**"

"TIME __ : __"

3 Setting the menu item

Press the [ENTER/£] button.

•

See your disc’s operating instructions for information

on the menu operation.

•

During Title/Chapter Search mode, the Title Number

display and the Chapter Number display are switched

to each other when you press the [2] or [3] button.

3 Enter the number

Press the number buttons.

Switching the Viewing Angle (DVD)

•

Example: In case of Chapter 13 of a DVD

"CHAPTER 013/030" :

Example: In case of 12 min. 34 sec. of a CD-DA

"GO TO 12:34" :

Press the [ANGLE] button.

Each time you press the button to switch

viewing angle.

4 Do Search (DVD only)

Press the [ENTER/£] button.

Selecting the Sub Title Language

(DVD)

Press the [SUB TITLE] button.

Each time you press the button to change the

sub title language.

PBC function On/Off (VCD)

You can determine whether to use the PBC

function for video CDs with playback control

record.

Press the [PBC] button.

Each time the button is pressed PBC function

turns ON or OFF.

When it’s ON, "PBC" indicator is ON.

Selecting the Audio Language (DVD)

Press the [AUDIO] button.

Each time you press the button to change the

voice language.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Switching the Vocal sound

(VCD, CD-DA)

Switching Time Display for Discs

Switch the display that appears while discs are

playing.

Press the [AUDIO] button.

Each time the button is pressed the vocal sound

switches.

Press the [DISP] button.

Each time the button is pressed the display

switches as shown below.

VCD

Setting

DVD

Display

Left vocal*

Right vocal*

Monaural Left (L / L)

Monaural Right (R / R)

Stereo (L / R)

"LEFT VOCAL"

"RIGHT VOCAL"

"MONO LEFT"

"MONO RIGHT"

"STEREO"

Information

Title time

Remaining time of title

Chapter time

Remaining time of chapter

OFF

Display

"TITLE ##/## CHAPTER ###/###"

"TITLE REMAIN"

"CHAPTER ELAPSED"

"CHAPTER REMAIN"

•

* The "LEFT VOCAL" and "RIGHT VOCAL" functions may

not operate normally if the Karaoke sounds are not

recorded correctly on the video CD.

VCD[PBC ON]

Information

Track Time

Remaining time of track

OFF

Display

"SINGLE ELAPSED"

"SINGLE REMAIN"

"OFF"

CD-DA

Setting

Display

Monaural Left (L / L)

Monaural Right (R / R)

Stereo (L / R)

"MONO LEFT"

"MONO RIGHT"

"STEREO"

VCD[PBC OFF], CD-DA

Information

Track Time

Display

"SINGLE ELAPSED"

"SINGLE REMAIN"

"TOTAL ELAPSED"

"TOTAL REMAIN"

"OFF"

Remaining time of track

Disc time

Remaining time of disc

OFF

Set a TV type

MP3

A TV type can be set according to the TV color

display mode.

Information

Track Time

Remaining time of track

OFF

Display

"SINGLE ELAPSED"

"SINGLE REMAIN"

"OFF"

1 Stops to play

Press the [BAND/7] button.

2 Sets a TV type

Press the [P/N] button.

Each time the button is pressed the TV type

switches as shown below.

•

When it is OFF, the title or the track elapse time is

displayed.

Display Setting

The color signal output is switched automatically

according to the recording system of the current disc.

"MULTI"

"NTSC" The color signals are output in the standard NTSC system.

"PAL"

The color signals are output in the standard PAL system.

•

The setup can be changed temporarily by the Remote

Commander. Set the TV type using the "TV TYPE" item

of 'Setting the Speaker setup' (page 28).

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD/ VCD/ CD-DA/ MP3 features of Remote

Title Information/Digest screen

(DVD)

5 Select Chapter

Press the desired [1] — [9] button.

This shows the information on your disc/title.

•

Press the [BAND/7] button to stop playing.

Press the [4] or [¢] button to change the display

page.

1 Enter Title Information

Press the [PBC] button.

6 Canceling the title information

Press the [PBC] button.

•

Some titles or chapters may not be displayed. In this

case, the original screen will be displayed.

2 Select Title

Press the [2] or [3] button.

•

Press the [1] or [¡] button to change 10 titles at a

time.

Press the [4] or [¢] button to switch to the first

or last title.

3 Play Title

Press the [ENTER/£] button.

•

Press the [BAND/7] button to stop playing.

4 Display Digest Screen

Press the [MENU] button.

•

Press the [BAND/7] button to return to the Title

Information screen.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Setup Menu features

�

��

�

��

� � �

In DVD source

3 Set the Setup page

Press the [ENTER/£] button.

DVD setup mode

4 Select the setup item

Press the [5] or [∞] button.

1 Enter Setup mode

Press the [SET UP] button.

Display

•

See the setup operations for Setup Items and their set

values.

"GENERAL SETUP"

"SPEAKER SETUP"

"AUDIO SETUP"

"PREFERENCES"

"EXIT SETUP"

Page 24

Page 26

Page 25

Page 28

5 Set the setup item

Press the [3] button.

Exit setup mode

6 Select the setting

Press the [5] or [∞] button.

7 Set the setting

•

When you have set the "Stereo" by 'Select audio

output channel' (page 17), you cannot set the

"SPEAKER SETUP" item.

You cannot set the "PREFERENCES" during playback.

To do so, stop to play (by selecting the "Stop").

Press the [ENTER/£] button.

The value you have set is displayed by the

pressed button.

8 Exit Setup page

2 Select the Setup page

Press the [5] or [∞] button.

The selected item is displayed in white

characters.

Select "MAIN PAGE" and press the [ENTER/£]

button.

9 Exit Setup mode

Select "EXIT SETUP" and press the [ENTER/£]

button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Setup Menu features

"ANGLE MARK"

Setting the General setup

When multiple image angles are recorded on

a DVD, they are shown by the mark during

playback.

1 Select "GENERAL SETUP" page

See 'DVD setup mode' (page 23) to select

"GENERAL SETUP".

Display

"ON"

Setting

Displays the Angle mark.

Does not display the Angle mark.

"OFF"

"OSD LANG"

Set the setup, message or other display

languages.

Display

Setting

"ENGLISH"

"CHINESE"

Set the English.

Set the Chinese.

"CAPTIONS"

When a disc having the Closed Captions

information is played back, this information can

be output.

2 Select the general setup item

Press the [5], [∞], [2] or [3] button to select

an item.

Press the [ENTER/£] button.

Display

"ON"

"OFF"

Setting

"TV DISPLAY"

Use the procedure described below to set the

output screen.

Outputs the Closed Captions signal.

Does not output the Closed Captions signal.

"SCR SAVER"

Display

Setting

To prevent the screen burn-out, you can start the

screen saver automatically when the on-screen

image does not change for a certain time period.

Wide-screen software with pan & scan

"NORMAL/PS" specification is played in a panned & scanned

screen (with the left and right sides cut off).

Wide-screen software with pan & scan

"NORMAL/LB" specification is played in a letter box screen (with

black stripes on the top and bottom).

Display

"ON"

"OFF"

Setting

Starts the screen saver automatically.

Does not use the screen saver.

Set the picture mode of the wide-screen monitor

to "FULL"

"WIDE"

3 Exit Setup page

Select "MAIN PAGE" and press the [ENTER/£]

button.

"PIC MODE"

Select a DVD image mode.

Display

Setting

The image is switched automatically depending

on the original image.

"AUTO"

The original image recorded on the DVD is the

Video mode.

"HI-RES"

The original image recorded on the DVD is the

Movie Picture mode.

"N-FLICKER"

English

Download from Www.Somanuals.com. All Manuals Search And Download.

"DYNAMIC"

Sets the dynamic range of playback sound

recorded on a Dolby Digital system DVD.

Setting the Audio setup

1 Select "AUDIO SETUP" page

See 'DVD setup mode' (page 23) to select

"AUDIO SETUP".

Display

Setting

For more powerful sound at regular

volumes

"FULL"

"7/8"

"6/8" / "3/4"

"5/8"

"4/8" / "1/2"

"3/8"

"2/8" / "1/4"

"1/8"

Large

Compression rate

≠

Small

"OFF"

For the regular sound

"PRO LOGIC"

Set the use of Dolby Pro Logic for the Dolby

Digital 2-channel DVD/VCD, CD-DA or MP3.

2 Select the audio setup item

Press the [5], [∞], [2] or [3] button to select

an item.

Display

"OFF"

"ON"

Setting

Turns the Dolby Pro-Logic function Off.

Turns the Dolby Pro-Logic function On.

Press the [ENTER/£] button.

"AUDIO OUT"

You cannot change this item setup. Use it as it is.

Turns the Dolby Surround play On

automatically when available.

"AUTO"

"OUTPUT MODE"

You cannot change this item setup. Use it as it is.

•

You cannot operate Dolby Digital 5.1ch surround or

DTS 5.1ch surround DVD and DTS-CD are playing.

"DUAL MONO"

Set the output sound of a Karaoke DVD (for a

sing-along machine).

3 Exit Setup page

Select "MAIN PAGE" and press the [ENTER/£]

Display

Setting

button.

"STEREO"

Stereo (L / R)

"L-MONO"

"R-MONO"

"MIX-MONO"

Monaural Left (L / L)

Monaural Right (R / R)

Mixed Left and Right (L+R)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Setup Menu features

"FRONT"

Display

Setting the Speaker setup

Setting

1 Select "SPEAKER SETUP" page

See 'DVD setup mode' (page 23) to select

"SPEAKER SETUP".

Used for speakers that can play the wide frequency

range including bass.

"LARGE"

"SMALL" Used for speakers that cannot play the bass enough.

"CENTER"

Display

Setting

Used for speakers that can play the wide frequency

range including bass.

"LARGE"

"SMALL" Used for speakers that cannot play the bass enough.

"OFF"

No center speaker is used.

"REAR"

Display

Setting

Used for speakers that can play the wide frequency

range including bass.

"SMALL" Used for speakers that cannot play the bass enough.

"OFF" No center speaker is used.

"LARGE"

2 Select the speaker setup item

Press the [5], [∞], [2] or [3] button to select

an item.

Press the [ENTER/£] button.

"SUBWOOFER"

Display Setting

"PRESENT" The subwoofer is used.

"NONE" No subwoofer is used.

"DOWNMIX"

Set the mixed sound output to the 2-channel

stereo port or the output of each channel

separately.

"FRONT POSN"

Display

Setting

Set a distance from front speakers to the listening

position. It can be set from "0.5 FT/0.1 M" to "13.0

FT/3.3 M" at every 0.5-foot (approximately 0.1-

meter) step.

"LT/RT"

Outputs the sound mixed to the Dolby Surround audio.

"STEREO" Outputs the sound mixed to the stereo sound.

"OFF" Outputs the sound in the multi-channel mode.

"CENTER POSN"

•

In the multi-channel mode, only the front speaker

sound is output when you have turned the Dolby Pro-

Logic function Off and when you play the 2-channel

sound of a linear PCM, a video CD, a music CD, or an

MP3 audio.

Set a distance from center speakers to the

listening position. It can be set from "0.5

FT/0.1 M" to "13.0 FT/3.3 M" at every 0.5-foot

(approximately 0.1-meter) step.

"REAR POSN"

Also, see the Notes of 'Select audio output channel'

section (page 17).

Set a distance from rear speakers to the listening

position. It can be set from "0.5 FT/0.1 M" to "13.0

FT/3.3 M" at every 0.5-foot (approximately 0.1-

meter) step.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

"TEST TONE"

See 'Test tone', page 27.

Test tone

This item allows you to adjust the output level of

each channels of speaker using the built-in test

signal. The output level must be adjusted from

the listening position.

3 Exit Setup page

Select "MAIN PAGE" and press the [ENTER/£]

button.

1 Select "SPEAKER SETUP" page

See 'DVD setup mode' (page 23) to select

"SPEAKER SETUP".

•

When you set the "DOWNMIX" to "LT/RT" or "STEREO,"

you cannot set any parameter other than "DOWNMIX."

The "LARGE" or "SMALL" setup of "FRONT," "CENTER"

and "REAR" items corrects the bass during playback of

Dolby Digital sound.

You can select the "SMALL" of "FRONT" item only

when you have set the "SUBWOOFER" item to

"PRESENT."

2 Selects the "TEST TONE" signal output

Select "TEST TONE" and press the [ENTER/£]

button.

•

3 Sets the "TEST TONE" output

Press the [5], [∞], [2] or [3] button to select

an item.

Press the [ENTER/£] button.

Display

"ON"

"OFF"

Setting

Outputs the test tone (noise signals).

Stops to output the test tone.

4 Adjusts the sound level of each speaker

See the 'Audio Control' section (page 11) and

adjust each speaker to output the same level of

sounds.

5 Turns the Test tone off

Select "OFF" and press the [ENTER/£]

button.

6 Exit Setup page

Select "MAIN PAGE" and press the [ENTER/£]

button.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Setup Menu features

"SUBTITLE"

Setting the Preferences

Set the language of the subtitles displayed on the

screen.

1 Select "PREFERENCES" page

See 'DVD setup mode' (page 23) to select

"PREFERENCES".

Display

Setting

"ENGLISH"

"FRENCH"

"SPANISH"

"CHINESE"

"JAPANESE"

"OFF"

English

French

Spanish

Chinese

Japanese

No subtitle is displayed

"DISC MENU"

Set the language used for the menus (title menu,

etc.).

Display

Setting

English

French

Spanish

Chinese

Japanese

"ENGLISH"

"FRENCH"

"SPANISH"

"CHINESE"

"JAPANESE"

•

You cannot set the "PREFERENCES" during playback.

To do so, stop to play (by selecting the "Stop").

2 Select the preferences item

Press the [5], [∞], [2] or [3] button to select

an item.

"LOCAL"

Display

"CHINA"

"FRANCE"

"HONG KONG"

"JAPAN"

"TAIWAN"

"GBR"

Setting

China

France

Hong Kong

Japan

Taiwan

Great Britain

United States of America

Press the [ENTER/£] button.

"TV TYPE"

A TV type can be set according to the TV color

display mode.

Display Setting

The color signal output is switched automatically

according to the recording system of the current disc.

"MULTI"

"USA"

"NTSC" The color signals are output in the standard NTSC system.

"PARENTAL"

See 'Setting the Parental level', page 29.

"PAL"

The color signals are output in the standard PAL system.

"PASSWORD"

See 'Changing the password', page 29.

•

The setup can be changed temporarily by the Remote

Commander. (page 21)

"DEFAULTS"

See 'Initializing', page 29.

"VIDEO OUTPUT"

You cannot change this item setup. Use it as it is.

"FOLDER LIST"

You cannot change this item setup. Use it as it is.

"AUDIO"

Set the audio language produced from the

speakers.

3 Exit Setup page

Select "MAIN PAGE" and press the [ENTER/£]

Display

Setting

English

French

Spanish

Chinese

Japanese

button.

"ENGLISH"

"FRENCH"

"SPANISH"

"CHINESE"

"JAPANESE"

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Parental level

Changing the password

Use this function to restrict the viewing of movies

to children of appropriate age levels only.

1 Select the "PASSWORD"

See 'Setting the Preferences' (page 28) to

select "PASSWORD.

1 Select the "PARENTAL"

See 'Setting the Preferences' (page 28) to

select "PARENTAL".

2 Select the "CHANGE"

Select "CHANGE" and press the [ENTER/£]

button.

2 Setting a Parental Lock level

Press the [5] or [∞] button.

3 Changes the password.

Press the number buttons.

Display

Setting

Plays children-oriented software.

Restricts playback of adult and general-oriented

DVD software.

Display

Setting

To enter your current password

correctly

To enter a new password

To enter the new password again for

confirmation

"1 G"

"OLD PASSWORD"

"NEW PASSWORD"

"CONFIRM PWD"

"2"

"3 PG"

"4 PG 13"

"5"

"6 PG-R"

"7 NC-17"

4 Set the password

Press the [ENTER/£] button.

Plays any software (including adult-, general-

and children-oriented).

"8 ADULT"

•

The password’s initial value is "3308".

"NO_PARENTAL" Canceling the parental lock.

3 Enter the password

Press the number buttons.

Enter your password ( 4-digit ). Input numbers

are displayed "X".

Initializing

Press the [ENTER/£] button.

Resets (or initializes) the parameters you have set

by "DVD Setup" to the original status when the

deck was shipped from the plant.

•

Parental level varies with the discs.

The password’s initial value is "3308".

1 Select the "DEFAULTS"

See 'Setting the Preferences' (page 28) to

select "DEFAULTS".

2 Select the "RESET"

Select "RESET" and press the [ENTER/£]

button.

3 Enter the password

Press the number buttons.

4 Initializes the parameters you have set

Press the [ENTER/£] button.

•

The DVD setup values are NOT initialized even when

the Reset button of the unit is pressed.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu system

�

��

�

��

�

��

�

��

�

��

�

��

�

��

Menu System

Clock Display

Setting during operation beep sound etc.

functions.

Select the Clock Display mode as follows.

Display

Setting

1 Switches to a display mode other than Clock

Display.

"Clock 12H"

"Clock 24H"

Sets the 12-hour system time display.

Sets the 24-hour system time display.

Press the [DISP] button.

Displays the frequency, play time, or AUX.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

Touch Sensor Tone

3 Select the menu item

Press the [2] or [3] button.

Setting the operation check sound (beep sound)

ON/OFF.

4 Set the menu item

Press the [5] or [∞] button.

Display

Setting

"Beep ON"

"Beep OFF"

Beep is heard.

Beep canceled.

5 Exit Menu mode

Press the [MENU] button.

•

When operation stops for 5 seconds, the Menu mode

closes.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Line Mute

When the phone is called or when the Voice

Guidance of navigation system starts, the audio

sound is muted.

Display

Setting

"LINEMUTE ON"

"LINEMUTE OFF"

Mutes the sound.

Does not mute the sound.

Contrast Adjustment

Adjusting the display contrast.

Display and Setting

"Contrast 00"

"Contrast 07"

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations of remote

��

�

��

Loading and Replacing the battery

Basic operations

Use one lithium battery (CR2025).

[PWR] button

Insert the batteries with the + and – poles aligned

properly, following the illustration inside the case.

Turning OFF the Power

•

Turn on the power by pressing the switch on the main

unit. The remote controller cannot be used. (Page 14)

Keep on slide

[VOL.] buttons

Adjusting the volume.

[SRC] button

Each time the button is pressed the source

switches.

For the source switching order refer to 'Selecting

the Source' (page 10).

Pull out

2WARNING

•

Store unused batteries out of the reach of children.

Contact a doctor immediately if the battery is

accidentally swallowed.

[MUTE] button

Turning the volume down quickly.

When it is pressed again it returns to the previous

level.

Do not set the remote on hot places such as above

the dashboard.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

[MENU] button

In Tuner source

When pressed, the DVD displayed the Title Menu.

For details, see the 'Using DVD Menu' section

(page 20).

[BAND/7] buttons

Select the band.

When pressed, the VCD/CD-DA starts "Track

Scan." For details, see the 'Track Scan' section

(page 17).

Each time the button is pressed it switches

between the FM1, FM2, FM3, AM1, and AM2

bands.

[REP] button

Starts the "Repeat Play". For details, see the

'Repeat Play' section (page 16).

[4]/ [¢] buttons

Tune the station having better receiving signals

automatically.

[1]/ [¡] buttons

Tune the receiving station manually.

The receiving frequency is increased for one step

each time you press the button.

•

This is the explanation of basic system operations. For

advanced system functions, see the 'DVD/VCD/CD-

DA/MP3 features of Remote' section (page 19).

[0] — [6] buttons

Press buttons [1] — [6] to recall preset stations.

In Disc source

[4]/ [¢] buttons

Doing chapter/track/file forward and backward.

[1]/ [¡] buttons

Fast Forwarding and Reversing.

Setting

2 times

4 times

6 times

8 times

Display

"FF 2X" / "FR 2X"

"FF 4X" / "FR 4X"

"FF 6X" / "FR 6X"

"FF 8X" / "FR 8X"

"PLAY"

Normal play

[8] button

Each time the button is pressed the song pauses

and plays.

[0] button

Ejects the disc by opening the panel.

Also, closes the panel.

[BAND/7] button

When pressed, the DVD deck memories the

current playback position and stops. When

pressed again, the memory position is erased.

The VCD/CD-DA/MP3 stops to play back.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories/ Installation Procedure

Accessories

Installation Procedure

1. To prevent a short circuit, remove the key from

the ignition and disconnect the - battery.

2. Make the proper input and output wire

connections for each unit.

..........1

3. Connect the speaker wires of the wiring harness.

4. Connect the wiring harness wires in the

following order: ground, battery, ignition.

5. Connect the wiring harness connector to the

unit.

..........2

..........4

..........1

6. Install the unit in your car.

7. Reconnect the - battery.

8. Press the reset button.

2WARNING

If you connect the ignition wire (red) and the battery wire

(yellow) to the car chassis (ground), you may cause a short

circuit, that in turn may start a fire. Always connect those

wires to the power source running through the fuse box.

•

If your car’s ignition does not have an ACC position,

connect the ignition wires to a power source that can be

turned on and off with the ignition key. If you connect

the ignition wire to a power source with a constant

voltage supply, as with battery wires, the battery may die.

If the console has a lid, make sure to install the unit so

that the faceplate will not hit the lid when closing and

opening.

If the fuse blows, first make sure the wires aren’t touching

to cause a short circuit, then replace the old fuse with

one with the same rating.

Insulate unconnected wires with vinyl tape or other

similar material. To prevent a short circuit, do not remove

the caps on the ends of the unconnected wires or the

terminals.

•

Connect the speaker wires correctly to the terminals to

which they correspond. The unit may be damaged or fail

to work if you share the - wires or ground them to any

metal part in the car.

When only two speakers are being connected to the

system, connect the connectors either to both the front

output terminals or to both the rear output terminals

(do not mix front and rear). For example, if you connect

the + connector of the left speaker to a front output

terminal, do not connect the - connector to a rear

output terminal

•

After the unit is installed, check whether the brake lamps,

blinkers, wipers, etc. on the car are working properly.

Mount the unit so that the mounting angle is 30° or less.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Wires to Terminals

FM/AM antenna input

Monitor unit for

front seats.

AUX left input (White)

��

AUX right input (Red)

��

Video cable (Accessory7)

Video output for front seats (Yellow)

��

Video output for rear seats (Yellow)

��

Front left output (White)

Front right output (Red)

��

�

��

Rear left output (White)

Rear right output (Red)

Center output (Gray)

�

��

Subwoofer output (Brown)

��

Connection cable (Green) (Accessory5)

��

Parking sensor wire

(Green)

To parking brake detection switch

harness of car

Wiring harness

(Accessory1)

For the sake of safety, be sure to

connect the parking sensor.

If no connections are made, do not

let the wire come out from the tab.

Depending on what antenna you are using, connect either to

the control terminal of the motor antenna, or to the power

terminal for the booster amplifier of the film-type antenna.

��

Motor antenna control wire (Blue)

Power control wire (Blue/White)

Line mute wire (Brown)

When using the optional power amplifier, connect to its power

control terminal.

��

Connect to the terminal that is grounded when either the

telephone rings or during conversation. To connect the

KENWOOD navigation system, consult your navigation manual.

��

To car light control switch

��

Dimmer control wire (Orange / White)

White/Black

White

To front left speaker

To front right speaker

Gray/Black

Gray

Green/Black

Green

To rear left speaker

Purple/Black

Purple

To rear right speaker

Ignition key

Car fuse box

ACC

switch

��

Ignition wire (Red)

Fuse (10 A)

Car fuse box

(Main fuse)

��

Battery wire (Yellow)

Ground wire (Black) - (To car chassis)

Battery

�

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Wires to Terminals

Using the Relay Connector

(Accessory 6)

1 Plug the vehicle's harness into the relay

connector.

2 Plug the parking brake detection wire into the

relay connector.

Relay

Vehicle

harness

connector

Detection wire

3 Lock the cable clamp.

Cable clamp

4 Press down using pliers until the conductive

metal is even with the plastic surface.

5 Lock the lid.

Lid

Conductive metal

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

non-Japanese cars

Japanese cars

1 Refer to the section 'Removing the hard rubber

frame' (page 38) and then remove the hard

rubber frame.

2 Align the holes in the unit (two locations on each

side) with the vehicle mounting bracket and

secure the unit with the accessory screws.

Metal mounting strap

(commercially available)

Firewall or metal support

T/N

Bend the tabs of the

T: Toyota cars

N: Nissan cars

mounting sleeve with a

screwdriver or similar utensil

and attach it in place.

� ��

��

Self-tapping screw

(commercially available)

� ��

��

Screw (M4X8)

(commercially available)

Accessory3...for Nissan car

Accessory4 ...for Toyota car

•

Make sure that the unit is installed securely in place. If

the unit is unstable, it may malfunction (for example, the

sound may skip).

•

During installation, do not use any screws except for

those provided. The use of different screws might result

in damage to the main unit.

Damage may occur if a screwdriver or similar tool is used

with excessive force during the installations.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing the Unit

Removing the hard rubber frame

Removing the Unit

1 Upper the frame and pull it forward as shown in

1 Refer to the section 'Removing the hard rubber

frame' (page 38) and then remove the hard

rubber frame.

the figure.

2 Remove the screw (M4 × 8) on the back panel.

3 Insert the two removal tools deeply into the slots

Lock

on each side, as shown.

Screw (M4X8)

(commercially available)

Face the side having

a projection inward.

2 When the upper level is removed, remove the

lower two locations.

Accessory2

Removal tool

•

Be careful to avoid injury from the catch pins on the

removal tool.

4 Pull the unit all the way out with your hands,

•

The frame can be removed from the bottom side in the

same manner.

When you mount the "hard rubber frame," take care to

face its upward and downward sides correctly. The side

having closer claws must face upward, and the one

having wider claws must face downward.

being careful not to drop it.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

What might seem to be a malfunction in your unit

may just be the result of slight misoperation or

miswiring. Before calling service, first check the

following table for possible problems.

? The sound quality is poor or distorted.



One of the speaker wires is being pinched by a

screw in the car.



Check the speaker wiring.



The speakers are not wired correctly.



Reconnect the speaker wires so that each

output terminal is connected to a different

speaker.

General

? The power does not turn ON.

? The Touch Sensor Tone doesn’t sound.

The preout jack is being used.



The fuse has blown.





After checking for short circuits in the wires,

replace the fuse with one with the same

rating.



The Touch Sensor Tone can’t be output from

the preout jack.



Speaker cable touches on chassis etc.

? The Line mute function does not work.

The Line mute wire is not connected properly.



Wire or insulate the speaker cable properly

and press the reset button.





Connect the wire correctly, referring to the

section on 'Connecting Wires to Terminals'.

? There’s a source you can’t switch.

There’s no media inserted.



? The Line mute function turns ON even though

the Line mute wire is not connected.



Set the media you want to listen to. If there’s

no media in this unit, you can’t switch to each

source.



The Line mute wire is touching a metal part of the

car.



Pull the Line mute wire away from the metal

part of the car.

? No video image appears.



The unit is not connected to the parking brake

detection switch.



Make proper connections according to

'Connecting Wires to Terminals'.

Tuner source



The parking brake is not engaged.



For safety reasons no video images are

displayed while the vehicle is moving.

Engaging the parking brake will cause images

to be displayed.

? Radio reception is poor.



The car antenna is not extended.



Pull the antenna out all the way.



The antenna control wire is not connected.



The setting of the NTSC/PAL switch is incorrect.

Set the NTSC/PAL switch correctly.



Connect the wire correctly, referring to the

section on 'Connecting Wires to Terminals'.





The local seek is turned on.

Turn off the local seek. (page 14)

? Nothing happens when the buttons are pressed.

The " " symbol appears in the screen.







You cannot carry out any operation disabled

by disc.

? The memory is erased when the ignition is

turned OFF.

Disc source

? The specified disc does not play, but another one



The ignition and battery wire are incorrectly

plays instead.

connected.



The specified DVD/CD is quite dirty.

Clean the DVD/CD.

The disc is loaded in a different slot from that

specified.



Connect the wire correctly, referring to the

section on 'Connecting Wires to Terminals'.



? No sound can be heard, or the volume is low.



The fader or balance settings are set all the way to

one side.



Eject the disc magazine and check the

number for the specified disc.



Center the fader and balance settings.



The disc is severely scratched.

Try another disc instead.



The input/output wires or wiring harness are

connected incorrectly.



? The disc won’t insert.

There’s already another disc inserted.

Press the [0] button and remove the disc.

Reconnect the input/output wires or the

wiring harness correctly. See the section on

'Connecting Wires to Terminals'.





English

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

MP3 source

? A VCD cannot be played using menus.



The VCD disc being played is not compatible with

P.B.C.

? Cannot play an MP3/WMA.



The media is scratched or dirty.



Menu playback is available only with VCD discs

recorded with P.B.C.



Clean the media, referring to the CD cleaning

of the section on 'About DVD/CDs' (page 8).

? The subtitle is not displayed.

? The sound skips when an MP3 is being played.



The DVD disc being played does not contain the

recording of subtitles.



The media is scratched or dirty.



Clean the media, referring to the CD cleaning

of the section on 'About DVD/CDs' (page 8).



The subtitle cannot be displayed when the

DVD disc being played does not contain the

recording of subtitles.



The recording condition is bad.

Record the media again or use another media.



? The voice (or subtitle) language cannot be

changed.

? The MP3 track time isn’t displayed correctly.



---





The DVD disc being played does not contain the

recording of more than one audio (or subtitle)

language.

There are times when it isn’t displayed

correctly according to the MP3 recording

conditions.



The voice (or subtitle) language cannot be

changed when the DVD disc being played

does not contain the recording of more than

one voice (or subtitle) language.

The messages shown below display your

systems condition.

No Disc:

The DVD/CD is quite dirty. The DVD/CD is

upside-down. The DVD/CD is scratched a

lot.

? The viewing angle cannot be changed.



The DVD disc being played does not contain the

recording of more than one angle.

 Clean the DVD/CD and load it correctly.

No DVD/CD in the unit.

 Insert the DVD/CD.



The viewing angle cannot be changed when

the DVD disc being played does not contain

the recording of more than one angle.



You are attempting to switch the angle in a

DVD section where more than one angle is not

recorded.

Disc Error:

The DVD/CD is quite dirty. The DVD/CD is

upside-down. The DVD/CD is scratched a

lot.



More than one viewing angle may be

 Clean the DVD/CD and load it correctly.

recorded only in limited sections in a disc.

Unknown Disc: The disc of this format cannot be played

back.

? Playback will not start even after a title is

selected.



A viewing restriction (RATING) has been set for the

disc.

Region Error: The DVD software encoded for other

region code.



Check the viewing restriction level (RATING)

setting.

Loading:

Error:

The unit is reading the data on the disc.

? The voice or subtitle language selected in the

initial setting is not played.

The DVD/CD mechanism does not operate

normally.



The DVD disc being played does not contain

the recording of the selected voice or subtitle

language.

 Hold down [0] button more than 5

seconds, and the DVD/CD mechanism

will be reset.



Use a DVD disc containing the recording of

the selected voice or subtitle language.

Mecha Error: The unit is malfunctioning for some reason.

 Press the reset button on the unit. If the

"Mecha Error" code does not disappear,

consult your nearest service center.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Specifications subject to change without notice.

FM tuner section

Audio section

Frequency range (50 kHz space)

: 87.5 MHz – 108.0 MHz

Maximum output power

: 40 W × 4

Usable sensitivity (S/N = 30dB)

: 9.3dBf (0.8 µV /75 Ω)

Full Bandwidth Power (4 Ω, 1 kHz, 10% THD)

: 28 W × 4

Quieting Sensitivity (S/N = 50dB)

: 15.2dBf (1.6 µV /75 Ω)

Tone action

Bass : 100 Hz ±10 dB

Frequency response (±3.0 dB)

Treble : 10 kHz ±10 dB

Video output level

: 1 Vp-p/75 Ω

Audio output level (during disc play)

: 1800 mV/10 kΩ

: 30 Hz – 15 kHz

Signal to Noise ratio (MONO)

: 70 dB

Selectivity (±400 kHz)

: ≥ 70 dB

Stereo separation (1 kHz)

: 30 dB

Auxiliary input

Frequency response (±1 dB)

: 20 Hz – 20 kHz

Input Maximum Voltage

: 1500 mV

AM tuner section

Frequency range (9 kHz space)

: 531 kHz – 1611 kHz

Usable sensitivity (S/N = 20dB)

: 28 dBµ (25 µV)

Input Impedance

: 55 kΩ

General

DVD/CD player section

D/A Converter

: 8 Level ∆∑

Wow & Flutter

: Below Measurable Limit

Frequency response

: 20 Hz – 30 kHz (Sampling frequency; 96 kHz)

Total harmonic distortion (1 kHz)

: 0.01 %

Operating voltage (11 – 16V allowable)

: 14.4 V

Current consumption

: 10 A

Installation Size (W x H x D)

: 178 × 50 × 165 mm

Weight

: 1.90 kg

Signal to Noise ratio

: 110 dB

Dynamic range

: 90 dB

MP3 decode

: Compliant with MPEG-1/2 Audio Layer-3

Disc format

: DVD-VIDEO / VIDEO CD / CD-DA / MP3

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Infinity Speaker System C336 User Manual
Insignia Portable CD Player NS B4111 User Manual
Intel Server SDS2 User Manual
Invacare Mobility Aid Tracer EXIR User Manual
Jettech Metal Products Dishwasher FX 44 User Manual
JVC Car Video System KV M700 User Manual
JVC Network Router PD 42DX User Manual
Keating Of Chicago Griddle 055523 User Manual
Kenwood CD Player KDC X959 User Manual
KitchenAid Blender 5KHB100 User Manual