Jasco Security Camera 45233 User Manual

45233  
Home Monitoring  
Wireless Color  
Camera  
User Manual  
For indoor/outdoor use. Do not use in wet locations.  
1-800-654-8483  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
2. Wall mounting hardware  
3. AC adapter  
CHOOSING A CAMERA MOUNTING LOCATION  
The 45233 Wireless Color Camera can be positioned  
on a desktop, or mounted to a wall. It is suitable for  
indoor or outdoor use. When choosing a mounting  
location, please be advised:  
• Do not use in wet locations. If using outside,  
position camera in a sheltered location.  
• DO NOT position the camera so that it points  
directly into the sun or any bright light, as this  
may cause damage to the camera.  
• Avoid viewing areas where half the area is in  
bright sunlight and the other half is dark, such  
as in the shadow of a building. All types of  
cameras have difficulty “seeing” into areas of  
such divergent light levels.  
• In low light conditions, the camera will  
automatically activate the Infrared (IR) LED’s and  
switch the camera to Night Vision mode. Night  
Vision viewing distance is up to 10 feet.  
• If using the included AC adapter to power the  
camera, it must be positioned no farther than  
8’ from an AC outlet. Do not use the supplied  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
adapter outside or run the cord through walls.  
If you need to extend the AC adapter cable,  
15 ft. extensions are available by contacting  
Customer Service at 800-654-8483. If using  
the optional rechargeable NiMH battery (sold  
separately), the operational time is up to 5  
hours, depending on usage.  
• The Camera has an unobstructed wireless  
transmission range up to 200 ft. from the  
receiver. Transmission distance indoors is  
reduced due to interior walls, wiring, household  
fixtures and metal plumbing.  
NIGHT VISION  
Infra-Red  
(IR) LEDs  
The 45233 Wireless Color  
Camera features Night  
Vision technology. Objects  
and images can be seen in  
little or no light up to 10 ft.  
The camera uses a special  
image sensor that  
Sensor  
automatically detects  
available light levels.  
It turns on/off the Infra-Red (IR)  
LEDs on the front of the camera. These LEDs provide  
artificial light that allows the camera to ‘see’ in the  
dark. Night Vision will appear as a Black and White  
image. When the image sensor detects enough  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
light, color will return to the images.  
MULTI-CAMERA SYSTEMS  
The 45233 Wireless Color Camera is designed as an  
add-on camera to work with the following GE Color  
and B/W Wireless camera systems - 45234, 45235,  
45236. These systems can accept a maximum of  
two cameras.  
Channel Selection  
Each wireless camera must be assigned to a  
specific channel (1 or 2) through the use of a slide  
switch located on the underside of the camera  
housing. The receiver or monitor must have its  
channel selection set to the same corresponding  
number.  
In a two camera system, one camera is set to  
Channel 1 and the other is set to Channel 2.  
Channel  
Selection  
switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
The receiver or monitor must be set to the 1/2  
position in order to view both cameras alternately  
(see receiver or monitor manuals for specific  
channel selection requirements).  
MAX  
INSTALLATION  
Desktop Mount:  
1. Place camera in desired  
location on a flat surface.  
MIN  
2. Set Channel switch on  
camera to 1 or 2. Set receiver or  
monitor to same channel.  
3. Adjust antenna and camera  
angle as needed for the clearest  
picture.  
Antenna pivots to  
increase/decrease  
signal strength  
Wall Mount:  
1. To simplify the wall mount process, you will  
find a custom mounting plate included with the  
mounting hardware.  
2. Select the ideal location. Using the supplied wall  
mount as a template, drill two 3/16” holes in the  
desired mounting location, and install the two wall  
anchors (included) into the holes, or screw directly  
into a wall stud. Secure the mounting plate to the  
wall. Do not run the adapter cable in walls; when  
securing the cable, do not cut or puncture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
3. Set Channel  
switch on camera  
to 1 or 2. Slide the  
camera onto the  
locking pins of the  
mounting plate.  
4. Adjust antenna  
and camera angle  
as needed for the clearest picture.  
OPTIONAL WIRELESS BATTERY PACK AVAILABLE  
(SOLD SEPARATELY)  
Rechargeable NiMH Battery is available for use  
with the 45233 Wireless Color Camera. This  
850mAh battery will power the 45233 Camera for  
approximately 5 hours on a single charge. To order  
call our Customer Support department at 1-800-  
654-8483, Monday–Friday 8 a.m.–5 p.m. CST.  
AC adapter  
charges the  
battery  
Wall or desktop mount  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
TROUBLE SHOOTING  
If you are having trouble operating this product,  
please consult the guide below. If you have any  
questions or feel the camera system is not  
operating correctly, or you simply need additional  
information, please visit our web site  
Customer Service Group 1-800-654-8483.  
SYMPTOM  
No camera picture  
1. Check all connectors. Make sure camera(s) and  
receiver are powered ON.  
2. Ensure camera(s) and receiver are set to correct  
channel(s).  
3. Make sure camera is within range of receiver.  
4. Adjust the antenna for the camera, monitor or  
both to obtain best image.  
Blank monitor  
1. Make sure receiver or monitor is switched ON,  
and the correct video input has been selected  
2. If using AC adapter, make sure it is plugged in.  
3. If using a battery, make sure it is installed  
correctly, and ensure it is fully charged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Interference on camera picture  
1. Make sure each camera (transmitter) is within  
range, and that no large obstructions are blocking  
the signal.  
2. Try repositioning the camera, monitor (receiver) or  
both to improve the reception quality.  
3. If a camera is positioned close to the monitor,  
point antenna away from the receiver.  
4. Reposition other nearby equipment transmitting  
on the 900MHz frequency.  
5. Adjust the antenna for the camera, monitor or  
both to obtain best image.  
Audio problems  
1. Ensure the volume is turned up sufficiently on the  
Monitor (or TV).  
2. Make sure the sound is within the microphone  
range.  
3. If the unit emits a loud wailing sound (feeds back),  
try moving the camera away from the receiver or  
angle the receiver differently.  
CAMERA SPECIFICATIONS (Subject to change without notice.)  
TV System............................................................................................NTSC  
Integrated Lens........................................5.6mm, F1.8 fixed focus  
Resolution................................................... 360 horizontal TV Lines  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
High-Speed Electronic Shutter.................1/60 - 1/15,000 sec  
Image Sensor........................................................................1/3” CMOS  
Min. Illumination..................0 lux up to 3 ft, 0.5 lux up to 10 ft  
Voltage................................................................................................. 9VDC  
Current Consumption.......................................................80~150mA  
Overall Size...................................................2.35”W x2.74Hx3.160D  
Frequency Range........................................................902 - 928 MHz  
Modulation..............................................................................................FM  
Channel Selection......................................................................Manual  
Case Finish.................................................UV resistant ABS plastic  
WARRANTY  
ONE-YEAR LIMITED WARRANTY: Jasco Products Company  
warrants this product to be free from manufacturing defects  
for a period of one year from the original date of consumer  
purchase. This warranty is limited to the repair or replacement  
of this product only and does not extend to consequential or  
incidental damage to other products that may be used with  
this unit. This warranty is in lieu of all other warranties express  
or implied. Some states do not allow limitations on how long an  
implied warranty lasts or permit the exclusion or limitation of  
incidental or consequential damages, so the above limitations  
may not apply to you. This warranty gives you specific rights,  
and you may also have other rights which vary from state to  
state. If unit should prove defective within the warranty period,  
return prepaid with dated proof of purchase to:  
Jasco Products Company  
10 E. Memorial Road, Oklahoma City, OK 73114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
WARNING  
Risk of fire and shock  
• Only use the supplied cUL listed AC to DC adapter.  
• The supplied adapter is for indoor use only.  
• Do not run the camera cable inside walls; when securing the  
cable, do not cut or puncture  
• Do not use in wet locations  
FCC STATEMENT  
NOTE: This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician  
for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Made in China  
is a trademark of General Electric Company  
and is used under license to Jasco Products Company LLC,  
10 E. Memorial Road, Oklahoma City, OK 73114  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Invacare Camping Equipment 1143214 User Manual
JVC DVD Recorder CU VD50U User Manual
JVC Network Card IF C151HDG User Manual
JVC Stereo System A UXP38V User Manual
JVC Stereo System UX S59 User Manual
JVC TV Receiver HR J780MS User Manual
JVC VCR SR VS30EK User Manual
Jwin CD Player JX CD680 User Manual
Jwin Network Card i552 User Manual
Klipsch Speaker IC SW 8 T 2 User Manual