MULTI-FORMAT SDI UNIT
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
ISTRUZIONI
:MULTI-SYSTEM SDI-GERÄT
:UNITÉ SDI MULTI-FORMAT
:UNITÀ SDI MULTI-FORMATO
MANUAL DE INSTRUCCIONES:UNIDAD SDI MULTIFORMATO
:
INSTRUCTIONS
IF-C151HDG
MULTI-FORMAT SDI UNIT FOR A JVC MONITOR
MULTI-SYSTEM SDI-GERÄT FÜR EINEN JVC-MONITOR
UNITÉ SDI MULTI-FORMAT POUR MONITEUR JVC
UNITÀ SDI MULTI-FORMATO PER MONITOR JVC
UNIDAD SDI MULTIFORMATO PARA MONITOR JVC
LCT1878-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
7 Preparation
• Wear gloves to protect your hands from metal parts on the unit.
• You will need a 6 mm Phillips screwdriver.
• Turn off the Monitor’s main power and unplug the power cable from the AC outlet.
7 Cautions
• Do not touch the wires or board pattern inside of the unit to keep them from being damaged.
• Do not put any object into the unit from the holes on the unit.
• Do not force to tighten the screws when attaching the unit to the monitor.
• Keep the connector cover attached to the monitor’s connector if the unit is not attached to the monitor.
• Do not touch the connector on the right side of the unit. This connector is used only for servicing.
1. Attach the wire connector to the
connector on the input unit.
Attach the wire connector fully to the
input unit’s connector.
2. Take out the screws and remove the
connector cover from the monitor.
• Do not take out other screws than the
ones used for the connector cover.
• Keep the connector cover and the
screws after removing.
3. Attach the input unit to the monitor as illustrated.
Secure the input unit using
the supplied screws (x 2).
2
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Attach the wire connector to the
connector on the monitor.
Attach the wire connector fully to the
monitor’s connector.
5. Attach the cover to the monitor as illustrated.
Secure the cover using
the supplied screws (x 6).
Make sure to prevent the wire
from being caught in between
the cover and the monitor.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Features
1
2
3
1 Audio output terminals (2 lines)
Decodes EMBEDDED AUDIO signals and outputs them as analogue signals.
\ See the table below for the combinations of the audio channels output from the CH1 or CH2
terminal.
Audio output terminals
Audio output modes
CH1
CH2
1ch
2ch
channel 1
channel 2
channel 2
channel 2
3ch
channel 3
channel 4
4ch
channel 4
channel 4
5ch
channel 5
channel 6
6ch
channel 6
channel 6
7ch
channel 7
channel 8
8ch
channel 8
channel 8
1–2ch
3–4ch
5–6ch
7–8ch
1–4ch
5–8ch
AUTO*
channels 1+2
channels 3+4
channels 5+6
channels 7+8
channels 1–4
channels 5–8
channels 1–8
channels 1+2
channels 3+4
channels 5+6
channels 7+8
channels 1–4
channels 5–8
channels 1–8
* The AUTO setting mixes and outputs all 8 signal channels. The output level is automatically set by
detecting the number of channels the signal has.
About the audio output level
When several audio channels are output at the same time, the more channels are
selected, the lower each channel’s level will be. (Each channel’s level becomes half for 1–
2ch, quarter for 1–4ch.)
NOTES:
• When you change the monitor’s input to INPUT A or B, the audio signals and channels of INPUT C
or D selected last time are output from these terminals.
• The audio signal is output from these terminals only when the monitor is turned on.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the audio channel:
Using the MENU control on the monitor, you can select the audio channel output from
the audio output terminal.
Set the group of the audio output modes you want to select on the monitor beforehand.
For more details, refer to the monitor’s manual.
2 SWITCHED OUT terminal (1 line)
Outputs the re-clocked signal.
• The input signal (INPUT C or D) currently selected on the monitor is output from this
terminal.
NOTES:
• When you change the monitor’s input to INPUT A or B, the signal of INPUT C or D selected last
time is output from this terminal.
• The signal is output from this terminal only when the monitor is turned on.
3 HD SDI/SD SDI, EMBEDDED AUDIO signal input terminals (IN C, IN D)
Accepts the following signals:
• SMPTE292M HD SDI signal
• SMPTE259M SD SDI signal
• EMBEDDED AUDIO signals including up to 8 audio channels with the sampling
frequency of 48 kHz.
\ Select the input using the INPUT SELECT button on the monitor.
To Select IN C terminal: Press the INPUT SELECT C button.
To Select IN D terminal: Press the INPUT SELECT D button.
About the AUDIO LEVEL METER function
You can check the conditions of the current EMBEDDED AUDIO signals on the AUDIO
LEVEL METER display.
You can turn on/off the AUDIO LEVEL METER display or change its settings using the
menu on the monitor.
For more details, refer to the monitor’s manual.
NOTE:
The type of signal coming through the IN C and IN D terminals are automatically recognized—HD
SDI or SD SDI signal. Note, however, that input lines are not changed automatically.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model:
IF-C151HDG
Type:
Target monitors:
Multi-Format SDI Unit
Consult your dealer.
Input/Output terminals: Digital signal input terminals (compatible with EMBEDDED AUDIO signal)
HD/SD SDI (IN C/IN D): auto detection, 2 lines, BNC connecter x 2
Digital signal output terminal (compatible with EMBEDDED AUDIO signal)
SWITCHED OUT: 1 line switched out, BNC connecter x 1
Analogue audio output terminal
AUDIO SWITCHED LINE OUT: 2 lines, RCA connecter x 2
(250 mV (rms), high impedance (–18 dB FS))
Format:
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.601: 525/625
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Compliant signal format: 720/60p, 1080/60i, 1035/60i*, 1080/50i, 1080/24psF, 720/50p, 480/60i,
576/50i, EMBEDDED AUDIO
* 1035/60i is not pre-set on the monitor.To input signals of this format, some
setup adjustments on the monitor are required.
Power consumption:
Weight:
0.05 A (12 V DC) / 0.2 A (5 V DC) / 0.4 A (3.3 V DC) / 0.5 A (2.5 V DC)
0.7 kg (1.6 lbs)
Dimensions (W x H x D): 127 mm (5”) x 185.9 mm (7 3/8”) x 56.9 mm (2 1/4”)
7 Dimensions
Unit: mm (inch)
<Front View> (Terminal Side)
<Side View>
5 (1/4")
5 (1/4")
103 (4 1/8")
127 (5")
41 (1 5/8")
56.9 (2 1/4")
6
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
0505MKH-MW-VP
|