For Models:
AV-36950
AV-35955
AV-32950
AV-27950
Color Television
User’s Guide
Illustration of AV-32950 and RM-C755
NOTETO THE CUSTOMER:
In the spaces below, enter the model and serial number
for your television (located on the rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this guide.
Keep this user’s guide in a convenient place for future reference.
Keep the carton and original packaging for future use.
Serial Number
Model Number
Download from Www.Somanuals.com. All Manuals Search And Download.
6 If an outside antenna is connected to the TV set, be sure the
antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810
of the National Electrical Code provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit,
connection requirements for the grounding electrode.
13 For added protection of the TV set during a lightning storm or
when the TV set is to be left unattended for an extended period
of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning
storms or power line surges.
14 A TV set and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the TV set and cart combination to overturn.
7 An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the
operating instructions. Adjust only those controls that are
covered in the operating instructions as improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV set to normal operation.
8 TV sets are provided with ventilation openings in the cabinet
to allow heat generated during operation to be released.
Therefore:
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in perfor-
mance — this indicates a need for service.
— Never block the bottom ventilation slots of a portable TV
set by placing it on a bed, sofa, rug, etc.
— Never place a TV set in a “built-in” enclosure unless
proper ventilation is provided.
16 Do not attempt to service this TV set yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat registe.r
9 To avoid personal injury:
17 When replacement parts are required, have the service
technician verify in writing that the replacement parts he uses
have the same safety characteristics as the original parts.
Use of manufacturer’s specified replacement parts can
prevent fire, shock, or other hazards.
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set
manufacturer.
18 Upon completion of any service or repairs to this TV set,
please ask the service technician to perform the safety check
described in the manufacturer’s service literature.
— Do not try to roll a cart with small casters across thresh-
olds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved by
the manufacturer.
19 When a TV set reaches the end of its useful life, improper
disposal could result in a picture tube implosion. Ask a
qualified service technician to dispose of the TV set.
USE
20 Note to CATV system installer.
10 Caution children about dropping or pushing objects into the TV set
through cabinet openings. Some internal parts carry hazardous
voltages and contact can result in a fire or electrical shock.
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical.
11 Unplug the TV set from the wall outlet before cleaning. Do
not use liquid or an aerosol cleaner.
12 Never add accessories to a TV set that has not been designed for
this purpose. Such additions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME!
Congratulations on your new television purchase! We thank you for choosing JVC.
We know you are anxious to start watching your new television, but before you operate it,
please read this guide and then keep it handy for future reference. After all, you just bought a great
TV with a lot of terrific features, you should know what each feature is and how to use it properly!
Please note that the illustrations, diagrams, and menu pictures are not exact replicas of the
actual television features. They are for reference only.
Again, congratulations and thank you for choosing JVC! Enjoy!
TABLE OF CONTENTS
Sound Adjust . . . . . . . . . . . . . . . . . . . . . 19
CONNECTIONS
Bass
Connections Checklist . . . . . . . . . . . . . . . . 5
Treble
Front & Rear Panel Diagrams . . . . . . . . . . . . 5
Balance
Cable & VCR Connections . . . . . . . . . . . . . . 6
MTS (Multi-channel Stereo Sound)
Audio/Video Connections — Stereo . . . . . . . . . 7
Some Sound Advice
Connecting to a Camcorder . . . . . . . . . . . . . 8
Clock/Timers . . . . . . . . . . . . . . . . . . . . . 20
Connecting to an External Amplifier . . . . . . . . . 8
On/Off Timer
Connecting to JVC AV Compu Link
Set Lock Code
Initial Setup . . . . . . . . . . . . . . . . . . . . . . 21
Capable Components . . . . . . . . . . . . . . . 9
TV Speaker
Audio Out
Closed Caption
GETTING STARTED
Remote Control . . . . . . . . . . . . . . . . . . . 10
Power . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjusting Volume . . . . . . . . . . . . . . . . . . 11
Changing Channels . . . . . . . . . . . . . . . . . 11
Setting the CATV and VCR codes . . . . . . . . . 12
BUTTON FUNCTIONS
Display . . . . . . . . . . . . . . . . . . . . . . . . 22
Closed Caption . . . . . . . . . . . . . . . . . . . . 22
Video Status . . . . . . . . . . . . . . . . . . . . . 22
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . 22
Hyper Surround . . . . . . . . . . . . . . . . . . . 23
TV/Video . . . . . . . . . . . . . . . . . . . . . . . 23
100+ . . . . . . . . . . . . . . . . . . . . . . . . . . 23
VCR Buttons . . . . . . . . . . . . . . . . . . . . . 23
Menu Buttons . . . . . . . . . . . . . . . . . . . . . 23
Muting . . . . . . . . . . . . . . . . . . . . . . . . . 23
Return+. . . . . . . . . . . . . . . . . . . . . . . 23
Number Buttons (10 Key Pad) . . . . . . . . . . . 23
PIP (Picture In Picture) . . . . . . . . . . . . . . . . 24
Channel -/+ for PIP . . . . . . . . . . . . . . . . . . 24
Source . . . . . . . . . . . . . . . . . . . . . . . . 24
Freeze . . . . . . . . . . . . . . . . . . . . . . . . . 24
Swap . . . . . . . . . . . . . . . . . . . . . . . . . 24
Move . . . . . . . . . . . . . . . . . . . . . . . . . 24
MENU FUNCTIONS
Symbols Used in this Guide . . . . . . . . . . . . 14
Onscreen Menus. . . . . . . . . . . . . . . . . . . 14
Plug In Menu . . . . . . . . . . . . . . . . . . . . . 15
Language
Auto Tuner Setup
Set Clock . . . . . . . . . . . . . . . . . . 16
Finish
Initial Setup . . . . . . . . . . . . . . . . . . . . . 17
Channel Summary
Channel Guard-Lock
Picture Adjust . . . . . . . . . . . . . . . . . . . . 18
Tint
Color
Picture
Bright
Detail
Notch
Noise Muting
Set Video Status
APPENDICES
Troubleshooting . . . . . . . . . . . . . . . . . . . 25
Limited Warranty . . . . . . . . . . . . . . . . . . . 26
Authorized Service Centers . . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . . . . . . 28
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N S 5
The Connections Checklist — Read Me First! section of this guide is a list of ideas to keep in mind when you
set out to perform your connections. It is designed to help us not-so-technically-advanced individuals. If you
read this section, and can’t identify the plugs, connectors, and components you have, do not be afraid to
seek help.
RF Connectors
1) Refer to the connection instructions in the user’s
guide for each component you plan to connect.
They will provide more detailed information about
their products, and they will tell you what plugs and
cables are required.
2) Most A/V input jacks and plugs are color coded:
• Yellow plugs are Video connections
S-Video Plug
• Red plugs are for Right Audio connections
• White plugs are Left Audio (Mono) connections
3) Perform one hookup at a time.
If you have many accessories to connect, make sure
each connection is correct by checking to see that it
works properly before attempting the next connection.
(For example, always start with the RF or Cable
connections, make sure it works, then move on to
video or VCR connections.)
A/V Input Plug
4) Unplug the power cord between each connection.
5) Each jack on the back of the TV is labeled. If you
read these instructions and still do not fully under-
stand the connections process, seek assistance.
AV Compu Link Cable
6) The AV Compu Link Cable is supplied with the
JVC device which you want to connect. If you do
not have one, but you do have a JVC Compu Link
capable VCR or HiFi, contact your local JVC dealer.
FRONT & REAR PANEL DIAGRAMS
FRONT PANEL DIAGRAM
AV-32950 • AV-27950
REAR PANEL DIAGRAM
Common to all models in this book.
FRONT PANEL DIAGRAM
AV-36950 • AV-35955
Download from Www.Somanuals.com. All Manuals Search And Download.
6 C O N N E C T I O N S
CABLE & VCR CONNECTIONS
There are two basic types of antenna or cable hookups. If you have an antenna, or have a cable TV
system that does not require you to use a cable box to tune channels, use Diagram#1. If you have a
cable system that requires you to use a cable box to access all channels, use Diagram #2. If you have
a cable system that requires you to use a cable box to access certain premium channels, but not
regular basic channels, use Diagram # 3.
NOTE: To get stereo sound from a hi-fi stereo VCR, you must connect it to the TV with Audio/Video cables. Also, to
get the best picture quality from any VCR use Audio/Video cables. (Use them! You’ll be glad you did.)
#1
1) Connect cable or antenna RF wire out from the wall, in to the splitter RF input.
2) Connect RF wire Out from the splitter RF output, in to the VCR RF input.
3) Connect RF wire Out from the splitter RF output, in to the TV VHF/UHF input.
4) Connect yellow video cable out from the VCR Video output, in to the TV Video input jack.
5) Connect white audio cable out from the VCR Left Audio output, in to the TV Left Audio input jack.
6) Connect red audio cable out from the VCR Right Audio output, into the TV Right Audio input jack.
❒ If your VCR is mono it has only one audio out jack, connect it to TV L/Mono input.
#2
1) Connect the cable RF wire out from the wall, in to the cable box input.
2) Connect RF wire Out from the cable box RF output, in to the VCR RF input.
3) Connect RF wire Out from the VCR RF output, in to the TV VHF/UHF input.
4) Connect yellow video cable out from the VCR Video output, in to the TV Video input jack.
5) Connect white audio cable out from the VCR Left audio output, in to the TV Left Audio input jack.
6) Connect red audio cable outfrom the VCR Right Audio output, into the TV Right Audio input jack.
❒ If your VCR is mono it has only one audio out jack, connect it to TV L/Mono input.
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N S 7
CABLE & VCR CONNECTIONS CONTINUED
#3
1) Conne
2) Connect RF Out from splitter RF output, in to cable box RF input.
3) Connect RF wire Out from cable box RF output, in to VCR RF input.
4) Connect RF wire Out from splitter RF output, in to TV VHF/UHF input.
5) Connect yellow video cable out from VCR Video output, in to TV Video input jack.
6) Connect white audio cable out from VCR Left audio output, in to TV Left Audio input jack.
7) Connect red audio cable outfrom VCR Right Audio output, into TV Right Audio input jack.
❒ If your VCR is mono it has only one audio out jack, connect it to TV L/Mono input.
AUDIO/VIDEO CONNECTIONS — STEREO
To get stereo sound from a hi-fi stereo VCR, you must connect it to the TV with Audio/Video cables.
To get the best picture quality from any VCR, you should connect it to the TV with Audio/Video cables.
1) Yellow video cable out from VCR, in to TV Video input jack.
2) White audio cable out from VCR Left Audio output, in to TV Left Audio input jack.
3) Red audio cable outfrom VCR Right Audio output, in to TV Right Audio input jack.
NOTE: If your VCR is mono, it has only one audio out jack. Connect it to the TV L/Mono input.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 C O N N E C T I O N S
CONNECTING TO A CAMCORDER
Play your home movies back through your TV by connecting your camcorder to the TV’s A/V Inputs.
1) White audio cable out from camcorder, in to TV Left Audio input jack.
2) Yellow video cable out from camcorder, in to TV Video input jack.
3) If you have a stereo model camcorder, connect the Red Audio cable out from the camcorder, in
to the TV Right Audio input jack.
TO CONNECT TO S-VHS ACCESSORIES:
Keep the audio connections the same as for a non-S-VHS VCR or camcorder (above), and use the
special S-VHS cable that came with the VCR or Camcorder.
1) S-VHS Plug out from VCR, in to TV’s S-Video input.
CONNECTING TO AN EXTERNAL AMPLIFIER
1) White audio cable out from TV Left Audio output jack, in to Amplifier [Left] input.
2) Red audio cable out from TV Right Audio output jack, in to Amplifier [Right] input.
NOTE: A) Set the TV Speaker to OFF (page 21), switch the audio output to VARI (page21), and
adjust the sound with the TV remote’s VOLUME button.
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N S 9
CONNECTING TO JVC AV COMPU LINK
CAPABLE COMPONENTS
AV Compu Link makes playing video tapes totally automatic. Simply insert a pre-recorded tape* into
the JVC brand VCR, and the VCR automatically turns on and starts playing. At the same time, the
VCR sends an AV Compu Link signal to the television telling it to turn on and switch to the correct
video input.
NOTE: The AV Compu Link cable should be included with the AV Compu Link capable accessory
you intend to connect. If it is not, contact an authorized JVC Service Center for Part # EWP 805-012.
NOTES:
A) The AV Compu Link cable has a male 3.5 mm (mono) mini plug on each end.
B) If your JVC brand VCR has A Code/B Code Remote Control Switching (see your VCR instructions),
using VCR A Code will switch the TV to Video Input 1. If you use Input 1 for Video out from the
cable box, use Input 2 here. Using B Code will switch the TV to Video Input 2.
C) To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi
receiver's instructions for detailed hookup diagrams.
* In order for the VCR to start playback automatically, the recording tabs must be removed from the
VHS tape. If the tab is in place, automatic switching starts when you push the VCR PLAY button.
** AV COMPULINK EX is compatible with the following 1998 receivers: RX-664V, RX-665V, RX-774V,
RX-884V, RX-1024V, and later receiver models.
Download from Www.Somanuals.com. All Manuals Search And Download.
0
1 G E T T I N G S T A R T E D
REMOTE CONTROL
RM-C755
RM-C755
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
G E T T I N G S T A R T E D
POWER
❒ Make sure that the TV/CATV switch is set to TV. Switch to CATV only to operate a cable box.
❒ Press the POWER button on the remote control or the TV front panel. The On Timer lamp will glow red.
❒ The first time you turn on the TV, the “Plug In Menu” will appear. You should turn to the Plug In
Menu section (page 15) now to learn more about this menu.
❒ To turn the power off, press the POWER button again. The On Timer lamp will go out.
❒ When the TV is off, the On-Timer lamp remains on while the On/Off Timer function is active, but at
a reduced brightness.
ADJUSTING VOLUME
1
2
CHANGING CHANNELS
10 key direct access.
1
Press the numbers on the remote’s 10 key pad. For single-digit channel numbers press 0 then the
number. For channels above 100, press the 100+ button plus the 2-digit number.
CHANNEL -/+ button.
2
• To scan the channels one at a time, press the remote’s CHANNEL -/+ button and release.
Return.
3
Press and release the RETURN+ button to return to the previous channel. First, select a channel
(game #1). Then, select another channel (game #2) with the 10 key pad and push the RETURN+
button to flip directly back and forth.
Return+ .
4
Press and hold down the RETURN+ button for three seconds. The message, “RETURN CHANNEL
PROGRAMMED !” will appear and you can scan as you wish. Press RETURN+ again and you will go
back to the Return+ channel.
To cancel a Return+ channel, press and hold down the RETURN+ button for another three seconds
and the message, “RETURN CHANNEL CANCELLED !” appears.
❒ Pressing a number key or turning the set off will also cancel a Return+ channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1 G E T T I N G S T A R T E D
SETTING THE CATV & VCR CODES
Many CATV & VCR brands have more than one code. If the first code in the list does not work, try the other
codes listed. If your CATV box or your VCR do not respond to any of the codes listed for the manufacturer, use
the remote control for that accessory to operate it.
CABLE BOX OR SATELLITE SETUP
1) Determine the correct code from the “CATV & Satellite Codes” chart below.
2) Slide the 2-Way Mode Selector Switch to CATV.
3) Press and hold down the DISPLAY button.
4) Enter the 2-digit code with the 10 key pad while continuing to hold down the DISPLAY button.
5) Release the DISPLAY button.
6) Confirm the operation of the cable box.
CATV & Satellite Codes
CABLE BOXES
CODES
CABLE BOXES
CODES
CABLE BOXES
CODES
Memorex
Movietime
NSC
07
Starquest
Sylvania
Tandy
04
19 35
62
ABC
Antronix
Archer
35 01 11 02 33 91 55
44
29 01 44 88 91 63 42 30 52 76
32 39 29 42 44 88 40 38 60
38 40 32
Oak
11 46 10 12 47
16 17
07
13 20 23 24 96 30 84
05 06 78
Teknika
Telecaption
Teleview
Texscan
Tocom
74 54
92 77
32 40 42 78 94
18 19 35
33 34 48 49 01 42 91 73
36 07 66 70
04
40
Belcor
82
82
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics 59
Cablestar
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comtronice
Contec
29 01 44 88 91 76
63 44 42 30 52 88
63 44 42 30 52 88
63 44 42 30 52 88
23
Toshiba
Tusa
Pulsar
Quest
63 44 42 30 52 88 07
01 02 03 04 34 55 83 85 91 93 TV86
95
42 21
10
Uniden Satellite 65 69
RCA
16 17
51 44 88 53
59 63 44 42 30 52 88
14 41
Unika
29 01 44 88 91 63 42 30 52
76
11
01
42 43 44 52 63 88 82
07 50 23 45
64
64
Curtis
Diamond
Drake
Eagle
Eastern
Focus
08 09 56 61 87 90
29 01 44 88 91 76
37 67 71
13 22 58 62 20 40 26 21
28 99
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
United Artists
United Cable
Universal
Videoway
Vid Tech
Vidter
28 99
32 39 29 42 44 88 02 60
07
68 72
59
GCElectronics 63 44 42 30 52 88 82
Gemini 04 85 32 30
Salora
Samsung
Scientific Atlanta 08 09 56 61 87 90
Sheritech
Signal
16 17 06 32 40 42 78 94
Viewstar
Zenith
Zentek
13 22 58 62 20 40 26 21
07 50 23 75
59
General Electric 57
General Instruments 01 02 03 04 34 55 83 85 91 93
95
27
13 22 58 62 20 40 26 04 42 32
42 78 94 21
02
32 40 42 78 94 63 44 30 52 88
16 17
Gerrard
Hamlin
Hitachi
Hytex
63 44 42 30 52 88
14 15 28 41 99
31 79 02 80
11
Signature
SL Marx
Sprucer
DIGITAL
SATELLITE
SYSTEMS
CODES
Jerrold
01 02 03 04 34 55 83 85 91 93
StandadrComponents 32 39 29 42 44 88 18 60
95
Starcom
Stargate
01 04 55
32 40 42 78 94 04 63 44 30 52
88
Macom
Magnavox
Matsushita
31 79 80
25 26 13
16 17
97
98
RCA
Sony
VCR SETUP
The remote is pre-programmed with the VCR codes for power on and power off, play, stop, record, pause,
fast-forward, rewind, and channel up and down.
1) Determine the correct code from the “VCR Codes” chart (page 13).
2) Slide the 2-Way Mode Selector Switch to TV.
3) Press and hold down the DISPLAY button.
4) Enter the 2-digit code with the 10 key pad while continuing to hold down the DISPLAY button.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
❒ When you record a channel, press the PLAY button while continuing to hold down the REC button.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
G E T T I N G S T A R T E D
VCR Codes
VCRs
CODES
VCRs
CODES
VCRs
Pulsar
CODES
Admiral
Aiko
84 40 07 31 06 65
46
Headquarter
HI-Q
16
08
34 35 46 47 18 24 03 94 52 15
27 89 32 90 91 83
16
Aiwa
Akai
31 35 94 27 03 87 34 28 26 29 Hitachi
32 33 20 26 28 64 21 Homeline
39 02 25 89 94 28 64 70 81
89 15 31 36 46 47 79 94
90 91
28 15 26 29 53 55 59
65 02 15 27 03 05 94
26 29 28 64
Quarter
Quartz
Quasar
16
American High 01 05
Images
ITT
65 01 02 05 06 41 42 71 04 18
03 56 92 72
Asha
Astra
03
03 94 52 15 27 89 32 90 91 83 J.C. Penney
Radix
Radio Shack
15
31 15
Audio Dynamics 26 27 88 97 64
Jensen
JVC
Audiovox
Aventura
Beaumark
15
00 85 28 15 26 29 64 53 55 59 Randex
26 28 29 27 64 16
89 15 31 36 46 47 79 94
98 03 02 05 06 56 57 72 34 04
99 70 75
31 35 94 27 03 87 34 28 26 29 Kenwood
98 03 02 05 06 56 57 72 34 04 KLH
RCA
35 43
99 75
Kodak
Lloyd
Lloyd’s
Logik
LXI
01 05 15
31 35 94 27 03 87 34 28 26 29
11
31 35 94 27 03 87 34 28 26 29 Runco
15 Sanky
34 35 46 47 03 94 52 15 27 89 Sansui
32 90 91 83
65 18 05 25 31 01 24 06 56 35
94 27 03 87 34 28 26 29
Realistic
Ricoh
65 07 15 16 08 31 32 01 05 84
40 09 03
30
Belcor
34 35 46 47
16 08 76
10 12 35 87 77 78
15
03 94 52 15 27 89 32 90 91 83 Magnasonic
65 01 02 05 06 41 42 71 04 18
Bell & Howell
Broksonic
Calix
Candle
Canon
24
18 24 07 84
43 31 26 28 64 29 03
03 94 52 15 27 89 32 90 91 25
83
Samsung
03 56 92 22
34 35 46 47
Magnavox
Capehart
Carrera
Carver
CCE
Citizen
Classic
Colortyne
Colt
Sanyo
16 08 76 03
03 94 52 15 27 89 32 90 91 83 Magnin
03 94 52 15 27 89 32 90 91 83 Scott
10 11 19 74 87 25 12 14
02 15 16 09 08 61 34 19 65 31
67 01 05 39 51 73 70 00 85
34 35 46 47
84 40 07 31 06 65
35 43
03 94 52 15 27 89 32 90 91 83
65 01 02 05 06 41 42 71 04 18
03 56 92 84 40 07 31 06
35 43
23 30 38 50 49 16 17 01 05 48
31 35 94 27 03 87 34 28 26 29
02 39
65 96 18 05 31 25 01 19 45
31 35 94 27 03 87 34 28 26 29
34 35 46 47
26 29 28 64
31 35 94 27 03 87 34 28 26 29
64
65 01 02 05 06 41 42 71 04 18
03 56 92
89 15 31 36 46 47 79 94
31 36 65 01 15 05
11 31
31 35 94 27 03 87 34 28 26 29
11 31 03
02 25 73 19 45 09
03 94 52 15 27 89 32 90 91 83
03 94 52 15 27 89 32 90 91 83
25
18 24
35 46
Marantz
Marta
27 21 01 05 18 24
Sears
89 15 31 36 46 47 79 94
03 94 52 15 27 89 32 90 91 26 Semitsu
89 15 31 36 46 47 79 94
89 15 31 36 46 47 79 94
27 21 01
Matsui
31 16 29 83
01 05
Sharp
Shintom
Matsushita
Megasonic
35
02 15 16 09 08 61 34 19 65 31 Shogun
Craig
Crosley
Curtis
03 08 15 43 31 26 28
67
Signature
31 35 94 27 03 87 34 28 26 29 MEI
34 35 46 47 03 94 52 15 27 89 Memorex
32 90 91 83
01 05
65 15 08 31 07 16 01 05 18 84 Singer
03 24
Sony
Curtis Mathes
65 01 02 05 06 41 42 71 04 18 MGA
19 92 20 21 67 80 95 45
Soundesign
03 56 92
MGN
03 94 52 15 27 89 32 90 91 83 STS
Sylvania
98 03 02 05 06 56 57 72 34 04 Symphonic
Cyberex
Daewoo
Daytron
DBX
03 94 52 15 27 89 32 90 91 83 MGN Technology 03
34 35 46 47 25
34 35 46 47
26 27 88 97 64
Midland
Minolta
99 75
Syqmax
Tatung
Teac
39 02 25 89 94 70
19 92 20 21 67 80 95 29 45
65 01 02 05 06 41 42 71 04 18
03 56 92 84 40 07 31 06
01 05 07 84
Denon
98 03 02 05 06 56 57 72 34 04 Mitsubishi
99 75
Mont. Ward
Dumont
03 94 52 15 27 89 32 90 91 83
31 35 94 27 03 87 34 28 26 29 Motorola
Technics
Dynatech
Dynatone
Electrohome
Electron
89 15 31 36 46 47 79 94
MTC
31 35 94 27 03 87 34 28 26 29 Technivox
52 15 89 32 90 91 83 Teknika
31 35 94 27 03 87 34 28 26 29 Telefunken
54 Thomas
98 03 02 05 06 56 57 72 34 04 TMK
19 92 20 21 67 80 95 15 45
98 03 02 05 06 56 57 72 34 04 Multitech
99 75
NAD
Electrophonic
Emerex
Emerson
28 15 26 29 53 55 59
38
National
99 75
Toshiba
10 87 11 12 13 14 08 15 86 37 NEC
62 19 25 65 58 78 77 31 45 20 Nikko
26 27 88 97 28 64 29
89 15 31 36 46 47 79 94
03
Totevision
Unitech
Vector
21 60 66
Noblex
Encore
65 01 02 05 06 41 42 71 04 18 Olympus
03 56 92
65 01 02 05 06 41 42 71 04 18 Vector Research 27 21 01
03 56 92
Video Concepts 27 21 01 25 20
Everex
Fisher
Fuji
Funai
Garrard
GE
Goldstar
Go Video
Gradiente
Granada
39 02 25 89 94 70
08 09 51 16
01 05 23
31 35 94 27 03 87 34 28 26 29
Optimus
Optonica
Panasonic
54 15 07 84
Videosonic
Wards
26 27 31 16 29 03
31 01 05 02 08 07 84 40 35 06
56 25 03
31 35 94 27 03 87 34 28 26 29
01 05
84 40 07 31 06 65
65 01 02 05 06 41 42 71 04 18
03 56 92 72 82
03 94 52 15 27 89 32 90 91 83
01 05 15 27 02 39 51 03
65 02 39 70
65 01 02 05 06 41 42 71 04 18
03 56 92 34 35 46 47
65 96 18 05 31 25 01 40
89 15 31 36 46 47 79 94
39 02 25 89 94 54 44 29 70
34 35 46 47
XR-1000
31
Paxsonic
Penney
Pentax
Philco
65 03 04 05 06 56 01 57
89 15 31 36 46 47 79 94 27
90 91
31
65 01 02 05 06 41 42 71 04 18 Philips
03 56 92
01
Yamaha
Zenith
26 27 31 16 29 28 64
93 23 24 30 18
Pilot
Pioneer
Grundig
Harley Davidson 31 35 94 27 03 87 34 28 26 29 Portland
Harmon/Kardon 21 19 27 20
Proscan
98 03 02 05 06 56 57 72 34 04
99 75
35
Harvard
35 43
35
Harwood
Protec
Download from Www.Somanuals.com. All Manuals Search And Download.
4
1 T H E O N S C R E E N M E N U S
The symbols used in this guide
PICTURE ADJUST
PREVIOUS
Whenever you see up and down arrows is this
book, press the MENU UP or MENU DOWN button.
This function allows you to:
• Move vertically in the main menu,
• Move through a submenu,
• Move to the next letter, number, or other
choice in a submenu, or
• Back up to correct an error
TINT
COLOR
PICTURE
BRIGHT
DETAIL
-------------------------
-------------------------
-------------------------
-------------------------
-------------------------
NEXT PAGE
SELECT
OPERATE
BY
BY
EX
IT
EXIT BY
Whenever you see left and right arrows, press the
MENU LEFT or MENU RIGHT button. This function
allows you to:
• Select the highlighted item, or
• Select the options in a submenu
PICTURE ADJUST
PREVIOUS
NOTCH
NOISE MUTING
SET VIDEO STATUS
ON OFF
ON OFF
The “Press Button” means you should press that
button on the remote control.
NEXT PAGE
SELECT
OPERATE
BY
BY
EX
IT
The “Helping Hand” points to the highlighted or
selected item in a menu.
EXIT BY
SOUND ADJUST
To use the Menu, press any of the remote’s 4-way
cursor control (MENU) buttons and JVC’s scrolling menu
will appear on screen. The item that appears yellow is
the selected item.
PREVIOUS
BASS
-------------------------
-------------------------
TREBLE
BALANCE
MTS
-------------------------
STEREO SAP MONO
Note: The menu screens shown in this book are representations
ON AIR
of the menu screens on your set, not exact replications.
NEXT PAGE
PLUG IN MENU
SELECT
OPERATE
BY
BY
EX
IT
EXIT BY
LANGUAGE
AUTO TUNER SETUP
SET CLOCK
ENG FRE SPA
CLOCK/ TIMERS
PREVIOUS
SET CLOCK
ON/ OFF TIMER
SET LOCK CODE
FINISH
SELECT
OPERATE
BY
BY
EX
IT
EXIT BY
NEXT PAGE
The “Plug In Menu” only appears the first time the TV is plugged
in, or after a power interruption of more than 90 seconds.
SELECT
OPERATE
BY
BY
EX
IT
EXIT BY
INITIAL SETUP
PREVIOUS
INITIAL SETUP
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
TV SPEAKER
AUDIO OUT
ON OFF
VARI FIX
LANGUAGE
ENG FRE SPA
CLOSED CAPTION
NEXT PAGE
NEXT PAGE
SELECT
BY
BY
EX
IT
SELECT
OPERATE
BY
BY
EX
IT
OPERATE
EXIT BY
EXIT BY
Download from Www.Somanuals.com. All Manuals Search And Download.
1
5
P L U G I N M E N U
NOTES:
AUTO TUNER SETUP
PLUG IN MENU
During Auto Tuner Setup, the TV will
automatically scan through all available
channels and memorize the active ones
so that when you scan, you do not pick
up weak or noisy channels.
The Plug In Menu comes up automati-
cally when you first turn on the TV after
plugging it in. The Plug In Menu sets the
default preferences for you for:
We recommend
that you do not
exit the Plug In
Menu before
completing the
setup so that your
preferences are
set right away.
❒ The Language in which you want the
onscreen displays to appear.
❒ The Auto Tuner Setup of channels to
be included in scan.
❒ Set the clock to the proper time so
that your timer functions will work.
To AUTO TUNER SETUP
To operate
If you do exit,
don’t panic, you
can set these
preferences later
with the regular
menu.
TUNER MODE
START
If you experience a power interruption,
the Plug In Menu will reappear when you
first turn on your TV. Move to FINISH with
To choose CABLE or AIR
To move to START
the
button and press
to exit and
restore your original settings.
To start programming
NOW
PROGRAMMING!
LANGUAGE
48
Your JVC television allows you to
choose from English, French, or Spanish
on-screen menus and displays.
The Programming takes approximately
1 to 2 minutes
To LANGUAGE
PROGRAMMING OVER!
LANGUAGE
ENG
FRE
SPA
Note: Noise Muting will not work while
Auto Tuner Setup is working.
To choose the language
ENGLISH
FRENCH
SPANISH
Download from Www.Somanuals.com. All Manuals Search And Download.
6
1 P L U G I N M E N U
Continued from below…
SET CLOCK
The Clock is the heart of all timer
NOTE:
functions. The clock must be set
To YES/NO
You must have the
before the timer functions to work.
Choose YES
clock set to
operate the On/Off
Timer.
To SET CLOCK
To operate
TIME
––:–– ––
START CLOCK
TIME
––:–– ––
Proceed to set the clock as in the
previous column.
START CLOCK
To set the hour (AM/PM)
To move to minutes
If you choose NO, you will receive the
following message:
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
YOU CANNOT OPERATE
ON/OFF TIMER !
THANK YOU !!
FINISH
Once you have set up the items in the
Plug In Menu you must select Finish.
Note: If you attempt to “Start Clock”
without setting the time you will
receive this message:
To FINISH
To exit
INCORRECT TIME
PLEASE TRY AGAIN
Note: You can reset the preferences that
you set here in the Plug In Menu via the
regular JVC Menu system.
CLOCK — ON/OFF TIMER
MESSAGE
If you do not set the clock but attempt
to use the On/Off Timer, you will get the
following message:
POWER INTERRUPTED
WOULD YOU SET CLOCK
FIRST?
YES
NO
Continued above…
Download from Www.Somanuals.com. All Manuals Search And Download.
1
I N I T I A L S E T U P 7
CHANNEL GUARD - LOCK
CHANNEL SUMMARY
NOTES:
You can add or delete channels from
channel scanning. You can also lock
out any “unauthorized” viewers from
one or up to all 125 channels.
Initial Setup Menu
items:
To CHANNEL SUMMARY
To operate
• Auto Tuner Setup,
and
• Language are
described in
detail in the Plug
In Menu section
CHNO.
01
SCAN
CH NO. SCAN
To CHANNEL SUMMARY
To operate
06
07
08
09
10
Ö
02
Ö
Ö
Ö
Ö
03
Note: Noise Muting will not work while
you are in the Channel Summary menu
In the Channel
Summary:
04
Ö
Ö
.
05
To move up and
down a column
(e.g. from channel
to channel) use the
CHANNEL-/+ button
SCAN
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. Conversely, if a
channel was too weak to receive a good
picture but was picked up anyway, delete
it by removing the Ö. (If you have not
performed the Auto Tuner Setup
To the Lock column
The access code zero (0) to
lock or unlock that channel
To move from item
to item (e.g. from
channel number to
add to lock) use
the MENU UP/DOWN
buttons.
Use the CHANNEL -/+ button to go to any
other channel you want to lock
described on page 15, do so now.)
EXIT when finished
CHANNEL GUARD MESSAGE:
CHANNEL -/+ to select the channel
To the SCAN column
This message appears when a viewer
attempts to watch a guarded channel:
CHNO.
01
SCAN
CH NO. SCAN
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. – – –
06
07
08
09
10
Ö
02
Ö
Ö
Ö
Ö
03
04
Ö
Ö
05
To watch a channel you have locked,
enter the lock code using the 10 key pad.
If the wrong lock code is entered, this
message will appear:
To include or delete from scan
EXIT when finished
INVALID LOCK CODE !
Note: Channels set to scan will be
marked with an Ö.
Note: See "Set Lock Code", for more
information.
Note: Some cable systems experience
interference from radio frequencies on
Cable Channel 95. If you like, you can
delete this channel from scanning by
removing the Ö.
Continued above…
Download from Www.Somanuals.com. All Manuals Search And Download.
8
1 P I C T U R E A D J U S T
TINT
NOTCH
NOTES:
Adjust the levels of red and green.
The Notch Filter sharpens the edges
of graphics and text, especially in
computer generated graphics
common in news and sports
programs.
To exit the Picture
Adjust menu at any
time press the EXIT
button.
To TINT
To accentuate green
To accentuate red
To move to the next
To NOTCH
To turn ON/OFF
COLOR
Adjust both the vividness and subtlety
of the color.
NOISE MUTING
Inserts a blue screen and eliminates
noise from channels that are not
broadcasting or are too weak.
To COLOR
To make colors more vivid
To subdue colors
To move to the next
To NOISE MUTING
To turn ON/OFF
Note: Noise Muting will not work
when you operate the Auto Tuner
Setup or Channel Summary.
PICTURE
Picture allows you to adjust the
picture’s range of black and white.
To PICTURE
SET VIDEO STATUS
To increase contrast
To decrease contrast
To move to the next
Save Picture Settings as “Choice”.
To SET VIDEO STATUS
To operate
TINT
COLOR
PICTURE
BRIGHT
BRIGHT
-------------------------
-------------------------
Adjust the degree of light and dark.
-------------------------
-------------------------
To BRIGHT
DETAIL
-------------------------
To lighten the picture
To darken the picture
To move to the next
SAVE AS CHOICE
To operate the TINT option
To move to the next option
Repeat the above steps to set each option.
DETAIL
Adjust the level of detail in the picture.
To SAVE AS CHOICE
To save settings and exit
To DETAIL
To make the picture sharper
To make the picture smoother
To move to the next
Note: Access your “Choice” settings
by pressing the VIDEO STATUS button
on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
9
S O U N D A D J U S T
BASS
MTS (Multi-Channel
NOTE:
The Bass level adjustment feature
allows you to raise or lower the level of
lower frequencies in the TV’s sound.
Television Sound)
MTS has no effect
on normal sound
broadcasts.
MTS technology gives you a choice
among stereo, mono, and Second
Audio Programs (SAP).
To BASS
To emphasize bass
To reduce bass
To move to next
To MTS
Select the mode
MTS
STEREO SAP MONO
TREBLE
ON AIR
The Treble level adjustment feature
allows you to raise or lower the level of
higher frequencies in the TV’s sound.
(The ON AIR arrow tells you if
the current signal contains
Stereo or SAP)
To TREBLE
To increase treble
Note: Keep the TV in STEREO mode
to get the fullest sound
quality.
To decrease treble
To move to next
Note: SAP will allow you to hear an
alternative soundtrack, if
available.
BALANCE
The Balance adjustment feature
allows you to center the TV’s sound
to your needs.
Note: Choose MONO to reduce
excess noise in a program or
channel.
To BALANCE
To shift the speaker balance
to the right
To shift the speaker balance
to the left
To move to next
Some Sound Advice
You can tell if a program is broadcast in stereo by the position of the ON AIR arrow in the MTS
menu. Unfortunately, it is common for some cable companies to squash the transmission of
stereo programs to mono because they only have mono equipment. If your TV is connected to a
cable system, the sound is at the mercy of that cable company — if they broadcast in mono, you
receive mono sound regardless of the original stereo programming.
Fortunately, most programs that are broadcast in stereo are aired on the major television
networks. If you connect your TV to an antenna instead of cable, and set the Tuner Mode in the
Auto Tuner Setup to “Air” instead of “Cable,” you will be able to pick up stereo broadcasts in
stereo.
Download from Www.Somanuals.com. All Manuals Search And Download.
0
2 C L O C K / T I M E R S
ON/OFF TIMER
SET LOCK CODE
YOU tell the TV to turn on and off.
Use it as an alarm to wake up, as a
program reminder, or to simulate that
you’re home when you’re out of the
house.
The Lock Code locks and unlocks
Channel Guard. Write this three digit
number down and keep it where
would-be viewers will not look for it!
To SET LOCK CODE
To operate
To ON/OFF TIMER
To operate
ON TIME
10 : 00 AM
7 : 00 AM
02
OFF TIME
CHANNEL
MODE
ONCE EVERYDAY
YES NO
ON/ OFF TIMER
The padlock icon appears
FINISH
Zero (the access code is zero)
To set the hour (AM/PM) you
want the TV to turn on
To move to minutes
LOCK CODE
0 0 0
To set the minutes
FINISH
To accept ON TIME and to move
to OFFTIME (set time again)
To move to CHANNEL
To select channel
To choose the first number
To move to the second place
To choose the second number
To move to the third place
To choose the third number
To FINISH
To move to MODE
Choose ONCE or EVERYDAY
To YES NO
Choose YES for on, NO for off
To FINISH
To save settings and exit
To save settings
Note: If you forget the Lock Code
you can set another one this same
way.
Note: A Timer Preview window will
appear in the PIP, lower right corner
of your screen, 7 seconds before the
Timer changes the current channel to
the timed program channel.
Note: After a power interruption you
must reset the lock code.
Note: In order for ON/OFF Timer to
work, the clock must be set. After a
power interruption the clock will be
cancelled.
Note: ON/OFF Timer cannot be set
to locked or guarded channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
I N I T I A L S E T U P
TV SPEAKER
CLOSED CAPTION
NOTE:
You can listen to the TV speakers, or
if your set is connected to a stereo,
turn them off to listen to the stereo’s
speakers.
If they are included in a program, you
can view closed captions or text
information.
Regarding the
operation of the
Language feature,
refer to page 15.
To CLOSED CAPTION
To operate
To TV SPEAKER
To turn the speaker ON
or OFF
CAPTION: CC1 CC2 CC3 CC4
TEXT
:
T1 T2 T3 T4
TV SPEAKER
ON OFF
BACKGROUND: BLACK CLEAR
FINISH
EXIT when finished
To select a caption channel
(CC1 to CC 4)
Note: TV Speaker will be cancelled
after a power interruption.
To accept that channel and
move to TEXT
Note: Before you set TV Speaker
from Off to On, make certain that
the volume level is low! If the
volume is high, the sound will be
extremely loud when you turn it on.
To select a text channel
(T1 to T4)
To accept that channel and
move to BACKGROUND
To select BLACK or CLEAR
AUDIO OUT
To accept that selection and
move to FINISH
Select fixed level or variable level
audio output signals.
To exit and save settings
To AUDIO OUT
Note: Captions are usually found on
CC1 and text on T1. The other caption
and text channels are workable but are
for future purposes.
AUDIO OUT
VARI
FIX
To VARI or FIX
Note: To activate the Closed Caption
settings that you set here:
VARI: Adjust the volume of the
external speaker by using the TV’s
VOLUME +/– button or remote control.
CLOSED CAPTION
FIX: Adjust the volume of the
external speaker with the audio
device controls.
(See page 22 for complete details on
accessing these settings with the
CLOSED CAPTION button.)
Note: When using external
amplifiers and speakers, shut off the
TV Speakers (above).
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2 B U T T O N F U N C T I O N S
DISPLAY
VIDEO STATUS
The onscreen display shows the current
status of timers and inputs.
The VIDEO STATUS button lets you select
the “Choice” settings of the Set Video
Status menu, or reset to factory settings.
DISPLAY
“Standard” resets the picture settings
to factory standard levels.
07
NOW
SLEEP TIMER
ON/ OFF TIMER
ON TIME
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
“Choice” consists of the settings that
you saved in the Set Video Status
menu, page 17.
OFF TIME
“Theater” for a film-like look to video.
❑ The channel or AV input (Ch. 07)
❑ Current time (12:20 PM)
VIDEO STATUS
❑ Sleep Timer minutes remaining (Off)
❑ On/Off Timer status (Everyday, on at
7:00 PM, off at 10:00 PM)
CHOICE
THEATER
STANDARD
Note: Each press of the DISPLAY button
changes the display mode:
SLEEP TIMER
The Sleep Timer turns off the TV for you
in case you fall asleep. Program it to
work in intervals of 15 minutes up to
180 minutes.
DISPLAY
TIME
CHANNEL
OFF
If you select time or channel, the time
or channel (or video input) will remain
on the screen.
SLEEP TIMER
0 15 30 45 60 75 90 105 120 135 150 165 180
CLOSED CAPTION
View the closed captions or text when
included in a program.
CLOSED CAPTION
SLEEP TIMER MESSAGE:
CC
TEXT
OFF
20 seconds prior to the automatic
shut-off, this message will appear:
Note: For more information see page 21.
GOOD NIGHT ! !
PUSH SLEEP TIMER BUTTON
TO EXTEND.
Note: To access a captioning option
or to turn one off, allow the display to
remain on screen until it disappears. In
a few seconds the captions will start.
You then have 20 seconds to press the
Sleep Timer button to delay turn off for
another 15 minutes.
Note: CC2, CC3, CC4, T2, T3, and T4
are functional, however, they are for
future purposes.
Note: If a black box covers 80% of
the screen, Text Mode is on. Press
CLOSED CAPTION to turn it off.
Note: Closed captioning may not
correctly operate when the signal
received is faint or when you are
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
B U T T O N
F U N C T I O N S
HYPER SURROUND
MUTING
NOTES :
The MUTING button turns the sound off
completely when you press it. Press it
again to restore the volume to the
previous level.
Create a deep, 3-dimensional sound
effect by channeling the sound through
the TV’s front firing speakers.
You can find
another discus-
sion of Return
and Return+ on
page 11.
HYPER SURROUND
HYPER SURROUND ON OFF
RETURN+
There are two kinds of Return…
TV/VIDEO
TV/INPUT controls the TV's input mode.
Return+ — Set a “Return Channel” to
return to after scanning with CHANNEL -/+.
TV/VIDEO
RETURN+ and hold for 3 seconds
TV
VIDEO-1
VIDEO-2
RETURN CHANNEL
PROGRAMMED !
100 +
Scan with CHANNEL -/+
The 100+ button lets you access all
channels above Channel 99.
RETURN+
To move to Channel 124:
Note: To cancel a Return channel, press
and hold Return+ for another 3 seconds
until “Return Channel Cancelled!” appears.
100+
2 (two)
4 (four)
Return — Return to the last channel
viewed after moving to another channel
via the 10 key pad.
RETURN+
VCR BUTTONS
Slide the 2-Way Mode Selector to TV
and this remote will control your VCR.
You can play, rewind and fast-forward,
record, pause, stop, move channel up
and down, and power on and off.
Move to another channel with
the 10 key pad.
RETURN+
Note: When PIP is on, the RETURN+ button
function affects only the main screen.
Note: To set the manufacturer’s code
for a VCR other than a JVC brand VCR
(page 12).
NUMBER BUTTONS
10 KEY PAD
Note: When you record a channel,
press the PLAY button while continuing
to hold down the REC button.
Change channels with the 10 key pad.
For example, to move to Channel 7:
MENU BUTTONS
The MENU buttons allow you to control
the options located in the menu
screens. A complete discussion of
these buttons and the menu system is
located on page 14.
0 (zero)
7 (seven)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
2 B U T T O N F U N C T I O N S
PIP (Picture in Picture)
PIP allows you to view two pictures
simultaneously.
FREEZE
NOTES:
You can freeze the picture in the main
screen into the PIP window.
When you turn off
the TV, PIP
automatically
turns off too.
FREEZE
(PIP) ON/OFF
Note: When the PIP is off, pressing
FREEZE takes a snapshot of the main
screen and puts it into the PIP
window… great for catching those mail
order addresses.
07
02
Note: When the PIP is on FREEZE stops
the PIP picture.
(PIP) ON/OFF to turn PIP off
SWAP
Note: The PIP channel and main
screen channel will appear in the
display momentarily right after you turn
on PIP. You can leave them up
permanently by pressing DISPLAY until
you reach the mode.
You can swap the PIP picture and the
main picture.
SWAP
Note: The PIP Screen is 1/9 of the
regular screen size.
MOVE
You can move the PIP window to any of
the TV’s four corners.
CHANNEL –/+ For PIP
MOVE
Change the channel in the PIP window.
CH –/+
SOURCE
You can select the source for the PIP
window.
Note: Each press of the MOVE button
will shift the PIP window one position.
SOURCE
TV
V-1
V-2
Download from Www.Somanuals.com. All Manuals Search And Download.
2
5
T R O U B L E S H O O T I N G
CHECK
PROBLEMS
• See if the power cord became unplugged.
No power
• Perhaps you have experienced a blown circuit breaker or fuse or a power outage.
• The antenna could be disconnected.
No picture or sound
• The Input mode (TV or video) could not be set properly, refer to page 23.
• The tuner mode (in the menu selection) could be set improperly, refer to page 15.
• The station may be having difficulties, check to see if other channels are operating normally.
• Check that the batteries are still working and properly installed.
• Make sure there are no objects blocking a clear path from the remote to the TV.
• Check that the 2-way mode selector switch is in the proper position — set to TV to view television.
Remote control is
not operating
• Maybe you are too far from the TV, you must be within 23 feet (or 7 meters).
• Make sure the channels are programmed. See Channel Summary, page 17.
• Perhaps the channel is locked, select it with the 10 key pad and follow instructions.
You cannot select a
certain channel
• Perhaps the On/Off Timer is set, press the power button, check page 20.
• The power was interrupted or the power cord unplugged.
• The Sleep Timer may be set, see page 22.
Power turns off
• The clock needs to be reset. See page 16.
The clock is wrong
PICTURE
CHECK
• Tint and color may be improperly adjusted. Check page 18.
Poor color quality
• Video Status mode may be set to an inappropriate setting. Check page 18.
• There could be interference from another energy consuming appliance, such as a computer,
another TV or VCR. Move any other such appliances farther away from the TV.
Lines or streaks
across the screen
• There could be interference from a running high wattage appliance such as a hair-dryer, vacuum
cleaner, or neon sign. You will have to move the antenna away from the source of the interfer-
ence or change it to a coaxial cable which is less prone to interference.
Spotted picture
• A building or airplane can reflect the original signal producing a second, delayed one. Adjust
the antenna position.
Double picture
(Ghosts)
• The antenna may be damaged, disconnected or turned. Check the antenna connection,
pages 6 to 7. If it is damaged, you will have to replace it.
Snowy picture/
Image noise
• Closed Caption Text Mode is on. Press the CLOSED CAPTION button until you select Off.
CHECK
Screen is 80% black
SOUND
• Make sure the MTS mode is properly set. Refer to page 19 for details on setting MTS Modes.
Bilingual or stereo
programscan’tbeheard
• TV Speakers may be turned off in the menu, see page 21.
No sound from TV
speakers at all
DON’T WORRY ABOUT THIS,IT’S NORMAL
NOT A PROBLEM
• It is normal to feel a surge of static electricity if you brush over or touch the screen.
Static electricity
• It is normal for the TV to emit crackling sounds when turned on or off. Unless the sound or
picture become abnormal, this is fine.
Occasional
crackling sounds
Download from Www.Somanuals.com. All Manuals Search And Download.
6
2 L I M I T E D W A R R A N T Y
For Canadian model televisions, see separate sheets for Warranty/Garantie and
JVC Authorized Service Centers in Canada.
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase
for the period as shown below (the “Warranty Period”). The picture tube is covered for two years.
1 YEAR
1 YEAR
This limited warranty is valid only in the fifty (50) United States, The District of Columbia and the Commonwealth of Puerto
Rico.
JVC WILL:
If this product is found to be defective, repair or replace defective parts at no charge to the original owner. Such repairs will
be made during regular business hours only at JVC authorized service centers. All parts repaired or replaced are warrantied
for the remainder of this Warranty Period only. All products and parts should be brought to an authorized service center on
a carry-in basis except for those models with a screen size larger than 25 inches which are covered on an in-home basis.
YOU MUST:
• Return your products to a JVC authorized service center with a copy of your bill of sale. For the authorized JVC service
center nearest you, call toll free (800) 252-5722.
• If service is not locally available, box the product carefully, preferably in its original container, and ship it, insured, to the
nearest authorized service center with a copy of the bill of sale and a letter of explanation as to the problem. Call the toll free
number above for the address.
WHAT IS NOT COVERED:
1) Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to
render such service, or if connected to any attachment not provided with the products, or if the model or serial number has
been altered, tampered with, or removed;
2) Initial installation, removal for repair, and reinstallation after repair is not covered;
3) Operational adjustments covered in the Owner’s manual, normal maintenance, video and audio head cleaning;
4) Damage that occurs during shipment, due to an act of God, or of consequence to cosmetic changes;
5) Signal reception problems and failures due to line power surges;
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7) Accessories, and;
8) Batteries (except for rechargeable batteries which are covered for 90 days from date of purchase.)
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILTY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THIS PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long the warranty lasts,
so these may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary
state to state.
If you have questions concerning your JVC product, please contact our Customer Relations Department:
JVC COMPANYOF AMERICA
41 Slater Drive
DIVISION OF US JVC CORP.
Elmwood Park, New Jersey 07407
Refurbished products carry a separate warranty. This warranty does not apply for details of refurbished product warranty.
Please refer to the refurbished product warranty information packaged with each refurbished product.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
A U T H O R I Z E D S E R V I C E C E N T E R S 7
For Canadian model televisions, see separate sheets for Warranty/Garantie and
JVC Authorized Service Centers in Canada.
CALL TOLL FREE (800) 252-5722
1)
2)
3)
4)
To locate the JVC Authorized Service Center nearest you.
To purchase parts or accessories.
For customer relations or hook-up assistance.
To locate the JVC authorized dealer nearest you.
JVC SERVICE & ENGINEERING
COMPANY OF AMERICA
DIVISION OF U.S. JVC CORP.
FACTORY SERVICE CENTER LOCATIONS
Dear customer;
In order to receive the most satisfaction from your purchase, read this guide before operating the unit, and before calling
for service make sure you check the Troubleshooting pages at the end of this book. In the event that repair is necessary, or
for the address nearest you, please refer to the factory service center list below, or within the continental United States, call
the toll free number above for an authorized service center. Remember to retain your bill of sale for warranty service.
107 Little Falls Road
Fairfield, NJ 07004-2105
(201) 808-9279
1500 Lakes Parkway
Lawrenceville, GA 30243-5357
(404) 339-2522
705 Enterprise Street
Aurora, IL 60504-8149
(708) 851-7855
5665 Corporate Avenue
Cypress, CA 90630-0024
(714) 229-8011
10700 Hammerly Suite 110
Houston, TX 77043
(713) 935-9331
2969 Mapunapuna Place
Honolulu, HA 96819-2040
(808) 833-5828
230 Eliot Street
Ashland, MA 01721-2377
(508) 881-5923
8192 State Road 84
Davie, FL 33324
(954) 472-1960
890 Dubuque Avenue
South San Francisco, CA 94080-1804
(415) 871-2666
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering
and production of the wide array of JVC products, service is key to maintaining the high level of performance for
which JVC is world famous. The JVC service and engineering organization stands behind our products.
National Headquarters
JVC Service & Engineering Company of America
Division of U.S. JVC Corp.
107 Little Falls Road
Fairfield, NJ 07004-2105
SHIPPING INSTRUCTIONS
THERE ARE NO USER
SERVICEABLE PARTS INSIDE
• Pack the TV in the original carton or one of equivalent size and
strength. Use the original foam cushions or equivalent padding.
• Enclose a letter of explanation stating the problem that exists
and a copy of the bill of sale.
THIS TV! TO PREVENT
ELECTRIC SHOCK, DO NOT
OPEN CABINET AND DO NOT
ATTEMPT TO
• Print your home address on both the outside and inside of the
shipping carton.
SERVICE THIS TVYOURSELF.
• Send to address nearest you in the list above.
Download from Www.Somanuals.com. All Manuals Search And Download.
S P E C I F I C A T I O N S
MODEL
Type
AV-36950
AV-35955
AV-32950
AV-27950
Color Television
NTSC system, BTSC system (Multichannel Sound)
Reception Format
Reception Range
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
AC 120V, 60Hz
130 W / 1.8 A
Power Source
Power Consumption
Screen Size
120 W / 1.5 A
36"/90 cm measured 35"/89 cm measured 32"/80 cm measured 27"/68 cm measured
diagonally, full square diagonally, full square diagonally, full square diagonally, full square
Audio Output
Speakers
3W + 3W
3
3
3
3 /16" x 4 /4"
2" x 4 /4"
8 x 12 cm oval x 2
5 x 12 cm oval x 2
Antenna Terminal
External Input Jacks
75 ohms (VHF/UHF) terminal (F-type connector)
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4 dBs), high impedance
S-Video Input Jack
Audio Output Jacks
AV Compu Link Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
More than 0 to 1550 mVrms (+6 dBs),
low impedance (400 Hz when modulated 100%)
3.5 mm mini jack x 1
7
1
3
7
1
3
1
1
1
3
3
1
33 /8 x 30 /8 x 23 /4
33 /8 x 30 /8 x 23 /4
Dimensions (inches)
(W x H x D) – (cm)
30 /4 x 26 /4 x 21 /2
25 /4 x 23 /8 x 20 /2
86.0 x 76.5 x 60.3cm 86.0 x 76.5 x 60.3cm
76.8 x 66.7 x 54.7 cm 65.4 x 59.1 x 51.8 cm
149.2 (lbs.)
67.8 (kg.)
149.2 (lbs.)
67.8 (kg.)
Weight (lbs.)
Weight (kg.)
112.2 (lbs.)
51.0 (kg.)
67.8 (lbs.)
30.8 (kg.)
Accessories
Remote control x 1 • AA batteries x 2
Specifications subject to change without notice.
LCT0139-001A-A
0598-TN-JII-JIM
Download from Www.Somanuals.com. All Manuals Search And Download.
|