USER’S GUIDE
MFC-495CW
Version 0
USA/CAN
Brother numbers
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.
Register your product
By registering your product with Brother International Corporation, you will be recorded as the
original owner of the product. Your registration with Brother:
„ may serve as confirmation of the purchase date of your product should you lose your receipt;
„ may support an insurance claim by you in the event of product loss covered by insurance; and,
„ will help us notify you of enhancements to your product and special offers.
Please complete and fax the Brother Warranty Registration And Test Sheet or, for your
convenience and most efficient way to register your new product, register on-line at
FAQs (frequently asked questions)
The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function
Center needs. You can download the latest software documents and utilities, read FAQs and
troubleshooting tips, and learn how to get the most from your Brother product.
Note
• You can check here for Brother driver updates.
• To keep your machine performance up to date, check here for the latest firmware upgrade
(for Windows® only).
For Customer Service
In USA:
1-877-BROTHER (1-877-276-8437)
1-901-379-1215 (fax)
In Canada:
1-877-BROTHER
(514) 685-4898 (fax)
Service Center Locator (USA only)
For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437).
Service Center Locations (Canada only)
For the location of a Brother authorized service center, call 1-877-BROTHER.
i
Ordering accessories and supplies
For best quality results use only genuine Brother accessories, which are available at most Brother
retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover,
or American Express credit card, you can order accessories directly from Brother. (You can visit
us online for a complete selection of the Brother accessories and supplies that are available for
purchase.)
Note
In Canada only Visa and MasterCard are accepted.
In USA:
1-877-552-MALL (1-877-552-6255)
1-800-947-1445 (fax)
In Canada:
1-877-BROTHER
Description
Item
LC61BK (Prints approx. 450 pages) 1
LC61C (Prints approx. 325 pages) 1
LC61M (Prints approx. 325 pages) 1
LC61Y (Prints approx. 325 pages) 1
Ink Cartridge Standard <black>
Ink Cartridge <cyan> (blue)
Ink Cartridge <magenta> (red)
Ink Cartridge <yellow>
Premium Plus Glossy Finish Photo Paper
(Letter size / 20 sheets)
(4" × 6" size / 20 sheets)
Matte Finish Inkjet Paper
(Letter size / 25 sheets)
Plain Finish Inkjet Paper
(Letter size / 100 sheets)
Telephone Line Cord
BP71GLTR
BP71GP
BP60ML (USA only)
BP60PL100 (USA only)
LG3077001 (USA only)
User's Guide
LX1508001 (English for USA and Canada)
LX1508002 (French for Canada)
1
For more information about the replacement consumables, visit us at http://www.brother.com/pageyield.
ii
Notice - Disclaimer of Warranties
(USA and Canada)
BROTHER'S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS
(COLLECTIVELY BROTHER'S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER'S
LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF
ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS
ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY
SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION
MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER'S LICENSOR(S) BE LIABLE TO YOU FOR ANY
CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE EVEN IF BROTHER'S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN
CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU. IN ANY EVENT BROTHER'S LICENSOR'S LIABILITY TO YOU FOR ACTUAL
DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE
ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
iii
Brother® One-Year Limited Warranty and Replacement Service
(USA Only)
Who is covered:
3 Damage caused by another device or
software used with this Product (including
but not limited to damage resulting from
„ This limited warranty (“warranty”) is given
only to the original end-user/retail
purchaser (referred to in this warranty as
“Original Purchaser”) of the accompanying
product, consumables and accessories
(collectively referred to in this warranty as
“this Product”).
„ If you purchased a product from someone
other than an authorized Brother reseller in
the United States or if the product was used
(including but not limited to floor models or
refurbished product), prior to your
purchase you are not the Original
Purchaser and the product that you
purchased is not covered by this warranty.
use of non Brother®-brand parts and
Consumable and Accessory Items);
4 Consumable and Accessory Items that
expired in accordance with a rated life;
5 Problems arising from other than defects in
materials or workmanship; and,
6 Normal Periodic Maintenance Items, such
as Paper Feeding Kit, Fuser and Laser
Units.
This limited warranty is VOID if this Product
has been altered or modified in any way
(including but not limited to attempted warranty
repair without authorization from Brother
and/or alteration/removal of the serial
number).
What is covered:
„ This Product includes a Machine and
Consumable and Accessory Items.
Consumable and Accessory Items include
but are not limited to print heads, toner,
drums, ink cartridges, print cartridges,
cordless handset battery, refill ribbons,
therma PLUS paper and thermal paper.
What to do if you think your Product is
eligible for warranty service:
Report your issue to either our Customer
Service Hotline at 1-877-BROTHER (1-877-
276-8437) or to a Brother Authorized Service
Center within the applicable warranty
period. Supply Brother or the Brother
Authorized Service Center with a copy of your
dated bill of sale showing that this Product was
purchased within the U.S. For the name of
local Brother Authorized Service Center(s),
call 1-877-BROTHER (1-877-276-8437) or
„ Except as otherwise provided herein,
Brother warrants that the Machine and the
accompanying
Consumable
and
Accessory Items will be free from defects in
materials and workmanship, when used
under normal conditions.
„ This warranty applies only to products
purchased and used in the United States.
For products purchased in, but used
outside, the United States, this warranty
covers only warranty service within the
United States (and does not include
shipping outside the United States).
What Brother will ask you to do:
After contacting Brother or a Brother
Authorized Service Center, you may be
required to deliver (by hand if you prefer) or
send the Product properly packaged, freight
prepaid, to the Authorized Service Center
together with a photocopy of your bill of sale.
You are responsible for the cost of
shipping, packing product, and insurance
(if you desire). You are also responsible for
loss or damage to this Product in shipping.
What is the length of the Warranty Periods:
„ Machines: one year from the original
purchase date.
„ Accompanying
Consumable
and
Accessory Items: 90 days from the original
purchase date or the rated life of
consumable, whichever comes first.
What Brother will do:
If the problem reported concerning your
Machine and/or accompanying Consumable
and Accessory Items is covered by this
warranty and if you first reported the problem
to Brother or an Authorized Service Center
within the applicable warranty period, Brother
or its Authorized Service Center will repair or
replace the Machine and/or accompanying
Consumable and Accessory Items at no
charge to you for parts or labor. The decision
as to whether to repair or replace the Machine
and/or accompanying Consumable and
Accessory Items is made by Brother in its sole
What is NOT covered:
This warranty does not cover:
1 Physical damage to this Product;
2 Damage caused by improper installation,
improper or abnormal use, misuse, neglect
or accident (including but not limited to
transporting this Product without the proper
preparation and/or packaging);
iv
Brother® One-Year Limited Warranty and Replacement Service
(USA Only)
discretion. Brother reserves the right to supply
a refurbished or remanufactured replacement
Machine and/or accompanying Consumable
and Accessory Items and use refurbished
parts provided such replacement products
conform to the manufacturer’s specifications
for new product/parts. The repaired or
replacement Machine and/or accompanying
Consumable and Accessory Items will be
returned to you freight prepaid or made
available for you to pick up at a conveniently
located Authorized Service Center.
If the Machine and/or accompanying
Consumable and Accessory Items are not
covered by this warranty (either stage), you
will be charged for shipping the Machine
and/or accompanying Consumable and
Accessory Items back to you and charged for
any service and/or replacement parts/products
at Brother’s then current published rates.
the product; or (iv) the warranty period on your
original Product has expired or has not been
sufficiently validated with a copy of the proof of
purchase (bill of sale). The replacement
Machine you receive (even if refurbished or
remanufactured) will be covered by the
balance of the limited warranty period
remaining on the original Product, plus an
additional thirty (30) days. You will keep the
replacement Machine that is sent to you and
your original Machine shall become the
property of Brother. Retain your original
Accessory Items and a copy of the return
freight bill, signed by the courier.
Limitations:
Brother is not responsible for damage to or
loss of any equipment, media, programs or
data related to the use of this Product. Except
for the repair or replacement as described
above, Brother shall not be liable for any
direct, indirect, incidental or consequential
damages or specific relief. Because some
states do not allow the exclusion or limitation
of consequential or incidental damages, the
above limitation may not apply to you.
The foregoing are your sole (i.e., only) and
exclusive remedies under this warranty.
What happens when Brother elects to
replace your Machine:
When a replacement Machine is authorized by
Brother, and you have delivered the Machine
to an Authorized Service Center, the
Authorized Service Center will provide you with
a replacement Machine after receiving one
from Brother. If you are dealing directly with
Brother’s Express Exchange Service Brother
will send to you a replacement Machine
shipped for receipt within two business days,
with the understanding that you will, after
receipt of the replacement Machine, supply the
required proof of purchase information,
together with the Machine that Brother agreed
to replace. You are then expected to pack the
Machine that Brother agreed to replace in the
package from the replacement Machine and
return it to Brother using the pre-paid freight bill
supplied by Brother in accordance with the
instructions provided by Brother. Since you will
be in possession of two machines, Brother will
require that you provide a valid major credit
card number. Brother will issue a hold against
the credit card account number that you
provide until Brother receives your original
Product and determines that your original
Product is entitled to warranty coverage. Your
credit card will be charged up to the cost of a
new Product only if: (i) you do not return your
original Product to Brother within five (5)
business days; (ii) the problems with your
original Product are not covered by the limited
warranty; (iii) the proper packaging instructions
are not followed and has caused damage to
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER WARRANTIES, WRITTEN OR
ORAL,
WHETHER
EXPRESSED
BY
AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL OR SAMPLE. ANY AND
ALL WARRANTIES OTHER THAN THIS
ONE, WHETHER EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED.
„ This Limited Warranty is the only warranty
that Brother is giving for this Product. It is
the final expression and the exclusive and
only statement of Brother’s obligations to
you. It replaces all other agreements and
understandings that you may have with
Brother or its representatives.
„ This warranty gives you certain rights and
you may also have other rights that may
vary from state to state.
„ This Limited Warranty (and Brother’s
obligation to you) may not be changed in
any way unless you and Brother sign the
same piece of paper in which we (1) refer
to this Product and your bill of sale date, (2)
describe the change to this warranty and
(3) agree to make that change.
Important: We recommend that you keep all
original packing materials, in the event that
you ship this Product.
© 2009 Brother International Corporation
v
BROTHER MULTIFUNCTION CENTER / FAX MACHINE
LIMITED WARRANTY
(Canada only)
Pursuant to the limited warranty of 1 year from the date of purchase for labour and parts, Brother
International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centres, will repair
or replace (at Brother's sole discretion) this MFC/Fax machine free of charge if defective in
material or workmanship. This warranty applies only to products purchased and used in Canada.
This limited Warranty does not include cleaning, consumables (including, without limitation, ink
cartridges, print cartridges, print rolls, thermal paper rolls, toner cartridges, drum units, OPC
belts, fixing units, print heads, paper feed rollers, transfer rolls, cleaning rollers, waste toner
packs, oil bottles) or damage caused by accident, neglect, misuse or improper installation or
operation, any damage caused from service, maintenance, modifications, or tampering by
anyone other than a Brother Authorized Service Representative, or if shipped out of the country.
The use of supplies or consumable items that are non-Brother products may void your warranty. This limited
warranty ceases when this machine is rented, sold, or otherwise disposed of.
Operation of the MFC/Fax machine in excess of the specifications or with the Serial Number or Rating Label
removed shall be deemed abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser.
In order to obtain warranty service, the MFC/Fax machine must be delivered or shipped freight prepaid by the
end-user/purchaser to a “Brother” Authorized Service Centre, together with your Canadian Proof of Purchase
in the form of a Sales Receipt.
When shipping or transporting your MFC/Fax machine, please refer to your Operation
Manual for the proper packaging procedures.
For Laser units: Failure to remove the Toner Cartridge (and Toner Drum Unit, waste toner
packs or oil bottles on applicable models) during shipping or transport will cause severe
damage to the Laser MFC/Fax machine and will void the Warranty.
For inkjet units: (When shipping your Inkjet MFC/Fax machine remove the ink cartridges and replace them with
the original protective parts. If original protective parts are not available, leave ink cartridges installed. Please
avoid shipping the unit without original protective parts or ink cartridges.) Damage to your print head resulting from
packing the Inkjet MFC/Fax machine without the ink cartridges or the protective parts will void your warranty.
Improper packaging may cause severe damage to the machine during shipping and will void the warranty.
BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING, WITHOUT
LIMITATIONS, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
EXCEPT TO THE EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY WAIVED.
No oral or written information, advice or representation provided by Brother, its Authorized
Service Centres, Distributors, Dealers, Agents or employees, shall create another warranty
or modify this warranty. The warranty states Brother's entire liability and your exclusive
remedy against Brother for any failure of the MFC/Fax machine to operate properly.
Neither Brother nor anyone else involved in the development, production, or delivery of this
MFC/Fax machine shall be liable for any indirect, incidental, special, consequential, exemplary, or
punitive damages, including lost profits, arising from the use of or inability to use the product, even
if advised by the end user/purchaser of the possibility of such damages. Since some Provinces do
not allow the above limitation of liability, such limitation, may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other
rights which vary from Province to Province.
Warranty Service is available at Brother Authorized Service
Centres throughout Canada.
For Technical Assistance or for the name and location of
your nearest Authorized Service Centre call 1-877-BROTHER.
Internet support: support@brother.ca or browse Brother's Web Site www.brother.ca.
vi
Table of Contents
Using the documentation.......................................................................................2
Viewing Documentation...................................................................................2
Accessing Brother Support (Windows®)................................................................5
Control panel overview ..........................................................................................6
LCD screen......................................................................................................8
Basic Operations .............................................................................................8
Loading paper and other print media.....................................................................9
Loading photo paper......................................................................................13
Printable area ................................................................................................16
Acceptable paper and other print media..............................................................17
Recommended print media ...........................................................................17
Handling and using print media.....................................................................17
Choosing the right print media.......................................................................19
Loading documents .............................................................................................21
Using the ADF ...............................................................................................21
Using the scanner glass ................................................................................22
Scannable area .............................................................................................23
On/Off key ...........................................................................................................24
Turning the machine off.................................................................................24
Turning the machine on.................................................................................24
Mode Timer..........................................................................................................24
Paper settings......................................................................................................25
Paper Type....................................................................................................25
Paper Size.....................................................................................................25
Volume Settings...................................................................................................26
Ring Volume..................................................................................................26
Beeper Volume..............................................................................................26
Speaker Volume............................................................................................27
Automatic Daylight Saving Time..........................................................................27
Sleep Mode .........................................................................................................27
LCD screen..........................................................................................................28
LCD Contrast.................................................................................................28
Setting the backlight brightness.....................................................................28
Setting the Wallpaper ....................................................................................28
vii
Faxing from the ADF ....................................................................................32
Changing fax resolution.................................................................................36
Dual Access (Black & White only) .................................................................37
Real Time Transmission................................................................................37
Sending a fax manually .................................................................................39
viii
Receive modes....................................................................................................40
Using receive modes...........................................................................................42
Fax Only ........................................................................................................42
Fax/Tel...........................................................................................................42
Manual...........................................................................................................42
External TAD .................................................................................................42
Receive mode settings ........................................................................................43
Ring Delay.....................................................................................................43
Easy Receive.................................................................................................44
Memory Receive (Black & White only) ................................................................44
Fax Forwarding..............................................................................................44
Paging ...........................................................................................................45
Fax Storage...................................................................................................46
Additional receiving operations............................................................................48
Printing a reduced incoming fax ....................................................................48
Printing a fax from the memory .....................................................................49
Remote Retrieval.................................................................................................50
Remote Fax commands ................................................................................51
Retrieving fax messages ...............................................................................52
Voice operations..................................................................................................53
Tone or Pulse (Canada only).........................................................................53
Fax/Tel mode.................................................................................................53
Telephone services..............................................................................................53
Voice Mail......................................................................................................53
Distinctive Ring..............................................................................................54
Caller ID.........................................................................................................57
Connections...................................................................................................59
Special line considerations............................................................................60
Multi-line connections (PBX) .........................................................................61
External and extension telephones......................................................................62
Using remote codes.......................................................................................63
ix
Manual dialing ...............................................................................................64
Caller ID history.............................................................................................66
Setting up groups for broadcasting................................................................69
Fax Journal (activity report)...........................................................................72
Setup to receive polling .................................................................................75
x
How to copy.........................................................................................................78
Entering Copy mode......................................................................................78
Making a single copy.....................................................................................78
Making multiple copies ..................................................................................78
Stop copying..................................................................................................78
Copy settings.......................................................................................................79
Changing copy quality ...................................................................................79
Sorting copies using the ADF........................................................................82
Adjusting Brightness and Contrast ................................................................82
Ink Save Mode...............................................................................................83
Paper Options................................................................................................83
Book Copy.....................................................................................................84
Watermark Copy............................................................................................85
‘Out of Memory’ message....................................................................................87
USB Flash memory drive
90
PhotoCapture Center® Operations......................................................................90
Getting started .....................................................................................................92
Entering PhotoCapture mode........................................................................93
Print Images.........................................................................................................93
View Photos...................................................................................................93
Print Index (Thumbnails) ...............................................................................94
Printing Photos ..............................................................................................94
Enhance Photos ............................................................................................95
Search by Date..............................................................................................98
Print All Photos..............................................................................................99
Slide Show.....................................................................................................99
Trimming......................................................................................................100
DPOF printing..............................................................................................100
xi
PhotoCapture Center® print settings .................................................................101
Entering Scan mode....................................................................................105
Auto Crop ....................................................................................................107
Understanding the Error Messages...................................................................108
DPOF printing..............................................................................................111
Understanding the Error Messages...................................................................112
xii
Choosing a location ...........................................................................................116
To use the machine safely.................................................................................117
Important safety instructions........................................................................122
Standard telephone and FCC Notices (These notices are in effect on
models sold and used in the United States only.) ...................................123
Federal Communications Commission (FCC) Declaration of Conformity
(USA only) ...............................................................................................125
LAN connection ...........................................................................................126
Legal limitations for copying ..............................................................................127
Trademarks........................................................................................................128
Troubleshooting ................................................................................................129
Dial Tone ....................................................................................................139
Telephone line interference.........................................................................139
Error and Maintenance messages.....................................................................140
Error animation............................................................................................146
Document jam ............................................................................................147
Printer jam or paper jam..............................................................................148
Routine maintenance.........................................................................................151
Replacing the ink cartridges ........................................................................151
Cleaning the scanner...................................................................................154
Cleaning the paper pick-up rollers...............................................................155
Cleaning the print head ...............................................................................155
Checking the print quality ............................................................................156
Checking the print alignment.......................................................................157
Checking the ink volume .............................................................................157
Machine Information..........................................................................................158
Checking the serial number.........................................................................158
Reset functions............................................................................................158
How to reset the machine............................................................................158
Packing and shipping the machine....................................................................159
xiii
Menu table...................................................................................................162
Menu table...................................................................................................163
General..............................................................................................................183
Copy ..................................................................................................................187
PhotoCapture Center®.......................................................................................188
Interfaces...........................................................................................................192
Computer requirements.....................................................................................193
Consumable items.............................................................................................194
Wireless one-push configuration .................................................................196
xiv
General Information
1
1
Electrical Hazard icons alert you to a
possible electrical shock.
Using the
documentation
1
Hot Surface icons warn you not to
touch machine parts that are hot.
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Notes tell you how you should
respond to a situation that may arise
or give tips about how the current
operation works with other features.
Symbols and conventions
used in the documentation
1
AccessingtheSoftware
User’s Guide and
The following symbols and conventions are
used throughout the documentation.
Network User’s Guide
1
Bold
Boldtypefaceidentifiesspecific
keys on the machine’s control
panel.
This User’s Guide does not contain all the
information about the machine such as how
to use the advanced features of the Printer,
Scanner, PC Fax and Network. When you are
ready to learn detailed information about
these operations, read the Software User’s
Guide and Network User’s Guide that are
on the CD-ROM.
Italics
Italicized typeface emphasizes
an important point or refers you
to a related topic.
Courier Text in Courier New font
New
identifies messages on the
LCD of the machine.
Viewing Documentation
1
WARNING
Viewing Documentation (Windows®)
1
Warnings tell you what to do to prevent
possible personal injury.
To view the documentation, from the Start
menu, point to Brother, MFC-XXXX (where
XXXX is your model name) from the
programs group, and then choose
CAUTION
User’s Guides in HTML format.
Cautions specify procedures you must
follow or avoid to prevent possible minor
injuries.
If you have not installed the software, you can
find the documentation by following the
instructions below:
IMPORTANT
a Turn on your PC. Insert the Brother
IMPORTANT describes procedures you
must follow or avoid to prevent possible
machine problems or damage to other
objects.
CD-ROM into your CD-ROM drive.
Note
If the Brother screen does not appear
automatically, go to My Computer
(Computer), double-click the CD-ROM
icon, and then double-click start.exe.
2
General Information
b If the model name screen appears, click
How to find Scanning instructions
1
your model name.
There are several ways you can scan
documents. You can find the instructions as
follows:
1
c If the language screen appears, click
your language. The CD-ROM top menu
will appear.
Software User’s Guide
„ Scanning
(Windows® 2000 Professional/
Windows® XP and Windows Vista®)
„ ControlCenter3
(Windows® 2000 Professional/
Windows® XP and Windows Vista®)
„ Network Scanning
(Windows® 2000 Professional/
Windows® XP and Windows Vista®)
ScanSoft™ PaperPort™ 11SE with OCR
How-to-Guides
d Click Documentation.
„ The complete ScanSoft™ PaperPort™
11SE with OCR How-to-Guides can be
viewed from the Help selection in the
ScanSoft™ PaperPort™ 11SE
application.
e
Click the documentation you want to read.
„ HTML documents:
Software User’s Guide and
Network User’s Guide in HTML
format.
This format is recommended for
viewing on your computer.
How to find Network setup
instructions
1
„ PDF documents:
Your machine can be connected to a wireless
or wired network. You can find basic setup
instructions in the Quick Setup Guide. If your
wireless access point supports
SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™, follow the steps in the Quick
Setup Guide. For more information about
network setup please see the Network User's
Guide.
User’s Guide for stand-alone
operations, Software User’s Guide
and Network User’s Guide in PDF
format.
This format is recommended for
printing the manuals. Click to go to
the Brother Solutions Center, where
you can view or download the PDF
documents. (Internet access and
PDF Reader software are required.)
3
Chapter 1
Viewing Documentation (Macintosh)
1
How to find Scanning instructions
1
There are several ways you can scan
documents. You can find the instructions as
follows:
a Turn on your Macintosh. Insert the
Brother CD-ROM into your CD-ROM
drive. The following window will appear.
Software User’s Guide
„ Scanning
(Mac OS X 10.3.9 - 10.5.x)
„ ControlCenter2
(Mac OS X 10.3.9 - 10.5.x)
„ Network Scanning
(Mac OS X 10.3.9 - 10.5.x)
Presto! PageManager User’s Guide
„ The complete Presto! PageManager
User’s Guide can be viewed from the Help
selection in the Presto! PageManager
application.
b Double-click the Documentation icon.
c Double-click your language folder.
How to find Network setup
instructions
1
d Double-click top.html to view Software
User's Guide and Network User's
Guide in HTML format.
Your machine can be connected to a wireless
or wired network. You can find basic setup
instructions in the Quick Setup Guide. If your
wireless access point supports
SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™, follow the steps in the Quick
Setup Guide. For more information about
network setup please see the Network User's
Guide.
e Click the documentation you want to
read:
„ Software User’s Guide
„ Network User’s Guide
4
General Information
„ To access the Brother CreativeCenter
for FREE photo projects and printable
downloads, click
Accessing Brother
Support (Windows®)
1
1
Brother CreativeCenter.
You can find all the contacts you will need,
such as Web support (Brother Solutions
Center), Customer Service and Brother
Authorized Service Centers in Brother
CD-ROM.
„ To return to the top menu, click Back or if
you are finished, click Exit.
„ Click Brother Support on the top menu.
The following screen will appear:
„ To access our web site
Brother Home Page.
„ To view all Brother Numbers, including
Customer Service numbers for the USA
and Canada, click Support Information.
„ To access the USA Brother online
shopping mall
additional product and services
information, click Brother Mall.com.
„ To access Canada’s Brother online
additional product and services
information, click Shop Online (Canada).
„ For the latest news and product support
click Brother Solutions Center.
„ To visit our web site for original/genuine
Brother Supplies
click Supplies Information.
5
Chapter 1
Control panel overview
1
8
9
Mem.
1
2
1
Fax and telephone keys:
„
„
„
Scan
„ Redial/Pause
Lets you access Scan mode.
Redials the last 30 numbers called. It also
inserts a pause when programming quick
dial numbers.
Copy
Lets you access Copy mode.
„ Hook
Photo Capture
Press before dialing if you want to make
sure a fax machine will answer, and then
press Black Start or Color Start.
Lets you access PhotoCapture Center®
mode.
4
Menu keys:
Also, press this key after picking up the
handset of the external telephone during
the F/T pseudo/double-ring.
„ Volume keys
d c
2
Dial Pad
While the machine is idle, you can press
these keys to adjust the ring volume.
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
„ Speed Dial key
(Canada only) The # key lets you temporarily
switch the dialing mode during a telephone call
from Pulse to Tone.
Press to store Speed Dial and
Group numbers in the machine’s memory.
Lets you store, look up, and dial numbers
that are stored in the memory.
3
6
Mode keys:
„
Fax
„ d or c
Lets you access Fax mode.
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
General Information
1
7
6
Mem.
Fax
12:45
12.21..2009
3
4
5
„ a or b
6
7
Stop/Exit
Press to scroll through the menus and
options.
Stops an operation or exits the menu.
„ Menu
Access the main menu.
Ink
Lets you clean the print head, check the print
quality, and check the available ink volume.
„ Clear/Back
Press to delete characters or to go back to
the previous menu level.
8
9
LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
„ OK
Lets you choose a setting.
Start keys:
Also, you can adjust the angle of the LCD
screen by lifting it.
5
On/Off
„
„
Color Start
You can turn the machine on and off.
Lets you start sending faxes or making
copies in full color. Also lets you start a
scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.
Black Start
Lets you start sending faxes or making
copies in black & white. Also lets you start
a scanning operation (in color or black &
white depending on the scanning setting in
the ControlCenter software).
7
Chapter 1
LCD screen
1
Basic Operations
1
The LCD shows the current machine status
when the machine is idle.
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
1
2
3
4
Mem.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
Fax
12:45
12.21..2009
c Press a or b to choose Mode Timer.
5
d Press d or c to choose 30Secs.
1
Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
General Setup
Mode Timer
Paper Type
Paper Size
Volume
30Secs
Plain Paper
Letter
Auto Daylight
Off
MENU
Select & Press
OK
0
Max
Press OK.
You can see the current setting on the
LCD:
2
Memory Status
Lets you see the available memory in the
machine.
General Setup
3
4
Ink indicator
Mode Timer
Paper Type
Paper Size
Volume
30Secs
Plain Paper
Letter
Lets you see the available ink volume.
Current Receive Mode
Lets you see the current receive mode.
„ Fax (Fax only)
Auto Daylight
Off
MENU
Select & Press
OK
„ F/T (Fax/Tel)
e Press Stop/Exit.
„ TAD (External TAD)
„ Mnl (Manual)
5
Faxes in memory
Shows how many received faxes are in the
memory.
8
Loading paper and documents
2
2
c With both hands, gently press and slide
Loading paper and
other print media
the paper side guides (1) and then the
paper length guide (2) to fit the paper
size.
2
2
Make sure that the triangular marks (3)
on the paper side guides (1) and paper
length guide (2) line up with the marks
for the paper size you are using.
Note
To print on Photo (4" × 6") or Photo L
(3.5" × 5") paper, you must use the photo
bypass tray. (See Loading photo paper
1
a If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
3
2
b Lift the output paper tray cover (1).
3
1
9
Chapter 2
e Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray.
Note
When you are using Legal size paper,
press and hold the universal guide release
button (1) as you slide out the front of the
paper tray.
1
IMPORTANT
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
f Gently adjust the paper side guides (1)
to fit the paper using both hands.
Make sure the paper side guides touch
the sides of the paper.
1
IMPORTANT
Always make sure that the paper is not
curled or wrinkled.
10
Loading paper and documents
g Close the output paper tray cover.
Loading envelopes and
postcards
2
About envelopes
2
2
„ Use envelopes that weigh from 20 to 25 lb
(80 to 95 g/m2).
„ Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
h Slowly push the paper tray completely
IMPORTANT
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
into the machine.
• That are of a baggy construction.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
Double flap
i While holding the paper tray in place,
pull out the paper support ( ) until it
clicks, and then unfold the paper
support flap ( ).
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
2
1
IMPORTANT
DO NOT use the paper support flap for
Legal size paper.
11
Chapter 2
b Put envelopes or postcards in the paper
tray with the address side down and the
leading edge in first as shown in the
illustration. With both hands, gently
press and slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or
postcards.
Loading envelopes and postcards
2
a Before loading, press the corners and
sides of envelopes or postcards to make
them as flat as possible.
IMPORTANT
If envelopes or postcards are ‘double-
feeding’, put one envelope or postcard in
the paper tray at a time.
1
2
12
Loading paper and documents
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
Loading photo paper
2
2
Note
a Open the envelope flap.
In Canada, the photo bypass tray is
called the photo paper tray.
2
b Put the envelope into the paper tray with
the address side down and the flap
Use the photo bypass tray, which is located on
the top of the output paper tray cover, to print
on Photo (4" × 6") and Photo L (3.5" × 5") size
paper. When you use the photo bypass tray,
you do not have to take out the paper that is in
the tray beneath it. (For the maximum number
of photo cards you can load, see Paper
positioned as shown in the illustration.
a Squeeze the blue photo bypass tray
release button (1) using your right index
finger and thumb and push the photo
bypass tray forward until it clicks into the
photo printing position (2).
c Adjust the size and margin in your
application.
1
2
Photo Bypass Tray
13
Chapter 2
b Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
d When you have finished printing photos
return the photo bypass tray to the
Normal printing position. If you do not,
you will get No Paper Fed errors
when you use Letter or Legal size paper.
1
Squeeze the blue photo bypass tray
release button (1) using your right index
finger and thumb and pull the photo
bypass tray back until it clicks (2).
1
2
c Put the photo paper into the photo
bypass tray and gently adjust the paper
side guides to the paper.
2
Make sure the paper side guides touch
the sides of the paper.
Check that the paper is flat in the tray.
Note
• Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
• Always make sure that the paper is not
curled or wrinkled.
14
Loading paper and documents
Removing small printouts
from the machine
IMPORTANT
2
If you do not return the photo bypass tray
to the Normal printing position after
printing photos, you will get a
No Paper Fed error when you use cut
sheet paper.
When the machine ejects small paper onto
the output paper tray cover you may not be
able to reach it. Make sure printing has
finished, and then pull the tray completely out
of the machine.
2
Photo Bypass Tray in the Normal
printing position
Photo Bypass Tray in the Photo
printing position
15
Chapter 2
Printable area
2
The printable area depends on the settings in the application you are using. The figures below
show the unprintable areas on cut sheet paper and envelopes. The machine can print in the
shaded areas of cut sheet paper only when the Borderless print feature is available and turned
on. (See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide
on the CD-ROM.)
Cut Sheet Paper
Envelopes
3
4
3
1
4
1
2
2
Top (1)
Bottom (2)
Left (3)
Right (4)
Cut Sheet
Envelopes
0.12 in. (3 mm)
0.47 in. (12 mm)
0.12 in. (3 mm)
0.95 in. (24 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
Note
The Borderless feature is not available for envelopes.
16
Loading paper and documents
Recommended print media
2
Acceptable paper and
other print media
2
To get the best print quality, we suggest using
Brother paper. (See the table below.)
The print quality can be affected by the type
of paper you use in the machine.
We recommend using ‘3M Transparency
Film’ when you print on transparencies.
2
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper you load.
Brother paper
Paper Type
Item
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
Letter Plain
BP60PL100 (USA only)
BP71GLTR
Letter Glossy Photo
Letter Inkjet (Matte)
4 × 6 in. Glossy Photo
BP60ML (USA only)
BP71GP
We recommend testing various paper types
before buying large quantities.
For best results, use Brother paper.
Handling and using print
media
„ When you print on inkjet paper (coated
paper), transparencies and photo paper,
be sure to choose the proper print media
in the ‘Basic’ tab of the printer driver or in
the Paper Type setting of the machine’s
2
„ Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
„ When you print on Brother Photo paper,
load one extra sheet of the same photo
paper in the paper tray. An extra sheet has
been included in the paper package for
this purpose.
„ Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
„ Avoid touching either side of
„ When you use transparencies or photo
paper, remove each sheet at once to
prevent smudging or paper jams.
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
„ Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.
17
Chapter 2
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
1
1
0.08 in. (2 mm) or greater curl may
cause jams to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a short grain
Paper capacity of the output paper
tray cover
2
Up to 50 sheets of Letter, Legal or A4 20 lb
(80 g/m2) paper.
„ Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
18
Loading paper and documents
Choosing the right print media
2
Paper type and size for each operation
2
2
Paper Type
Paper Size
Usage
Fax
Copy
Photo
Printer
Capture
Cut Sheet
Letter
8 1/2 × 11 in. (215.9 × 279.4 mm) Yes
Yes
Yes
Yes
–
Yes
Yes
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
A4
8.3 × 11.7 in. (210 × 297 mm)
Yes
Legal
8 1/2 × 14 in. (215.9 × 355.6 mm) Yes
7 1/4 × 10 1/2 in. (184 × 267 mm) –
Executive
JIS B5
A5
–
7.2 × 10.1 in. (182 × 257 mm)
5.8 × 8.3 in. (148 × 210 mm)
4.1 × 5.8 in. (105 × 148 mm)
4 × 6 in. (10 × 15 cm)
–
–
–
–
–
–
–
–
–
–
–
Yes
–
–
A6
–
Cards
Photo
Yes
–
Yes
–
Photo L
Photo 2L
Index Card
Postcard 1
3 1/2 × 5 in. (89 × 127 mm)
5 × 7 in. (13 × 18 cm)
–
Yes
–
5 × 8 in. (127 × 203 mm)
3.9 × 5.8 in. (100 × 148 mm)
5.8 × 7.9 in. (148 × 200 mm)
–
–
–
–
–
Postcard 2
(Double)
Envelopes
C5 Envelope 6.4 × 9 in. (162 × 229 mm)
DL Envelope 4.3 × 8.7 in. (110 × 220 mm)
–
–
–
–
–
–
–
–
–
–
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
–
COM-10
Monarch
4 1/8 × 9 1/2 in. (105 × 241 mm)
3 7/8 × 7 1/2 in. (98 × 191 mm)
–
–
–
–
JE4 Envelope 4.1 × 9.3 in. (105 × 235 mm)
–
–
Transparencies Letter
8 1/2 × 11 in. (215.9 × 279.4 mm) –
Yes
Yes
Yes
Yes
A4
8.3 × 11.7 in. (210 × 297 mm)
8 1/2 × 14 in. (215.9 × 355.6 mm) –
5.8 × 8.3 in. (148 × 210 mm)
–
Legal
A5
–
19
Chapter 2
Paper weight, thickness and capacity
2
Paper Type
Weight
Thickness
No. of
sheets
17 to 32 lb (64 to 120 g/m2)
17 to 53 lb (64 to 200 g/m2)
Up to 58 lb (Up to 220 g/m2)
Up to 58 lb (Up to 220 g/m2)
Up to 32 lb (Up to 120 g/m2)
Up to 53 lb (Up to 200 g/m2)
100 1
20
Cut Sheet Plain Paper
Inkjet Paper
3 to 6 mil (0.08 to 0.15 mm)
3 to 10 mil (0.08 to 0.25 mm)
Up to 10 mil (Up to 0.25 mm)
Up to 10 mil (Up to 0.25 mm)
Up to 6 mil (Up to 0.15 mm)
Up to 10 mil (Up to 0.25 mm)
Up to 20 mil (Up to 0.52 mm)
–
20 2 3
Glossy Paper
20 2 3
30
Cards
Photo 4" × 6"
Index Card
Postcard
30
10
10
20 to 25 lb (75 to 95 g/m2)
–
Envelopes
Transparencies
1
2
Up to 100 sheets of plain paper 20 lb (80 g/m2).
For Photo 4" × 6" paper and Photo L 3.5" × 5" paper, use the photo bypass tray (in USA) or the photo paper tray (in
3
BP71 69 lb (260 g/m2) paper is especially designed for Brother inkjet machines.
20
Loading paper and documents
How to load documents
2
Loading documents
2
IMPORTANT
• DO NOT pull on the document while it is
feeding.
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
2
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
Using the ADF
2
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m2) paper and always fan the pages
before putting them in the ADF.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or liquid
correction fluid are completely dry.
Recommended environment
2
a Unfold the ADF Document Output
Temperature:
Humidity:
Paper:
68 to 86 °F (20 to 30 °C)
Support Flap (1).
50 to 70%
b Fan the pages well.
20 lb LTR (80 g/m2 A4)
c Adjust the paper guides (2) to fit the
width of your document.
Document Sizes Supported
2
d Make sure you place your document,
face down, top edge first in the ADF
underneath the guides until you feel it
touch the feed roller and the LCD shows
ADF Ready.
Length:
Width:
5.8 to 14 in. (148 to 355.6 mm)
5.8 to 8.5 in. (148 to 215.9 mm)
17 to 24 lb (64 to 90 g/m2)
Weight:
2
1
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
21
Chapter 2
How to load documents
Note
2
Using the scanner glass
2
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
To use the scanner glass, the ADF must
be empty.
Document Sizes Supported
2
a Lift the document cover.
Length:
Width:
Up to 11.7 in. (297 mm)
Up to 8.5 in. (215.9 mm)
Up to 4.4 lb (2 kg)
b Using the document guidelines on the
left and top, place the document face
down in the upper left corner of the
scanner glass.
Weight:
c Close the document cover.
IMPORTANT
If you are scanning a book or thick
document, DO NOT slam the cover down
or press on it.
22
Loading paper and documents
Scannable area
2
The scannable area depends on the settings
in the application you are using. The figures
below show unscannable areas.
2
3
4
1
2
Usage Document Top (1)
Size
Left (3)
Bottom (2) Right (4)
Fax
Letter
A4
0.12 in.
(3 mm)
0.16 in.
(4 mm)
0.12 in.
(3 mm)
0.04 in.
(1 mm)
Legal
Letter
A4
0.12 in.
(3 mm)
0.16 in.
(4 mm)
Copy
Scan
0.12 in.
(3 mm)
0.12 in.
(3 mm)
0.12 in.
(3 mm)
0.12 in.
(3 mm)
Letter
A4
0.12 in.
(3 mm)
0.12 in.
(3 mm)
0.12 in.
(3 mm)
0.12 in.
(3 mm)
23
General setup
3
3
On/Off key
3
Mode Timer
3
You can turn the machine on and off by
pressing the On/Off key.
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
Note
If you have connected an external
telephone or TAD, it is always available.
Turning the machine off
3
a Press and hold down the On/Off key.
The LCD will show Shutting Down.
The LCD will stay on for a few seconds
before going off.
Turning the machine on
3
a Press Menu.
a Press the On/Off key.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Mode Timer.
d Press d or c to choose 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off.
Press OK.
e Press Stop/Exit.
24
General setup
Paper Size
3
Paper settings
3
You can use five sizes of paper for copies:
Letter, Legal, A4, A5 and 4 6 in. (10 15 cm)
Paper Type
3
×
×
and three sizes for printing faxes: Letter, Legal
and A4. When you change the size of paper
you load in the machine, you will need to
change the paper size setting at the same time
so your machine can fit an incoming fax on the
page.
To get the best print quality, set the machine
for the type of paper you are using.
a Press Menu.
3
b Press a or b to choose
General Setup.
Press OK.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Type.
d Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
c Press a or b to choose Paper Size.
d Press d or c to choose Letter, Legal,
A4, A5 and 4"X6".
e Press Stop/Exit.
Press OK.
Note
e Press Stop/Exit.
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
25
Chapter 3
Beeper Volume
3
Volume Settings
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
Ring Volume
3
You can choose a range of ring volume
levels, from High to Off.
You can choose a range of volume levels,
from High to Off.
While the machine is idle, press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
You can also change the volume through the
menu, by following the instructions below:
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Beeper.
Setting the Ring Volume from the
menu
3
e Press d or c to choose Low, Med, High
or Off.
Press OK.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
f Press Stop/Exit.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Ring.
e Press d or c to choose Low, Med, High
or Off.
Press OK.
f Press Stop/Exit.
26
General setup
Speaker Volume
3
Automatic Daylight
Saving Time
3
You can choose a range of speaker volume
levels, from High to Off.
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
3
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Speaker.
a Press Menu.
e Press d or c to choose Low, Med, High
b Press a or b to choose
General Setup.
Press OK.
or Off.
Press OK.
f Press Stop/Exit.
You can also adjust the speaker volume by
c Press a or b to choose
Auto Daylight.
pressing Hook.
d Press d or c to choose On (or Off).
Press OK.
a Press Hook.
b Press d or c
.
e Press Stop/Exit.
This setting will stay until you change it
again.
Sleep Mode
3
c Press Hook.
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode.
d Press d or c to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
e Press Stop/Exit.
27
Chapter 3
Setting the Dim Timer for the
backlight
LCD screen
3
3
LCD Contrast
3
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
c Press a or b to choose LCD Settings.
Press OK.
e Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
d Press a or b to choose LCD Contrast.
e Press d or c to choose Light, Med or
f Press Stop/Exit.
Dark.
Press OK.
Setting the Wallpaper
3
f Press Stop/Exit.
You can change the wallpaper.
Setting the backlight
brightness
a Press Menu.
3
b Press a or b to choose
General Setup.
Press OK.
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
c Press a or b to choose LCD Settings.
Press OK.
a Press Menu.
d Press a or b to choose Wallpaper.
Press OK.
b Press a or b to choose
General Setup.
Press OK.
e Press a or b to choose your wallpaper
from the four available designs.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
f Press Stop/Exit.
d Press a or b to choose Backlight.
e Press d or c to choose Light, Med or
Dark.
Press OK.
f Press Stop/Exit.
28
Security features
4
4
Setting and changing the
TX Lock password
TX Lock
4
4
TX Lock lets you prevent unauthorized
access to the machine. You will not be able to
continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled
Delayed Faxes will be sent even if you turn on
TX Lock, so they will not be lost.
Note
If you have already set the password, you
will not need to set it again.
4
While TX Lock is On, the following operations
are available:
Setting up the password
4
a Press Menu.
„ Receiving faxes
„ Fax Forwarding
b Press a or b to choose Fax.
Press OK.
(If Fax Forwarding was already On)
„ Paging
c Press a or b to choose
Miscellaneous.
Press OK.
(If Paging was already On)
„ Remote retrieval
(If Fax Storage was already On)
d Press a or b to choose TX Lock.
Press OK.
„ PC Fax Receive
(If PC Fax Receive was already On)
e Enter a 4-digit number for the password.
Press OK.
While TX Lock is On, the following operations
are NOT available:
„ Sending faxes
„ Copying
f When the LCD shows Verify:,
re-enter the password.
Press OK.
„ PC printing
g Press Stop/Exit.
„ Scanning
„ PhotoCapture
„ Operation from Control panel
Note
If you forget the TX Lock password,
please call Brother Customer Service.
29
Chapter 4
Changing the password
4
Turning TX Lock on/off
4
a Press Menu.
Turning TX Lock on
4
b Press a or b to choose Fax.
Press OK.
a Press Menu.
c Press a or b to choose
Miscellaneous.
Press OK.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Press a or b to choose Set Password.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
f Enter a 4-digit number for the current
e Press a or b to choose Set TX Lock.
Press OK.
password.
Press OK.
f Enter the registered 4-digit password.
Press OK.
g Enter a 4-digit number for a new
password.
The machine goes offline and the LCD
shows TX Lock Mode.
Press OK.
h When the LCD shows Verify:,
re-enter the password.
Press OK.
Turning TX Lock off
4
a Press Menu.
i Press Stop/Exit.
b Enter the registered 4-digit password.
Press OK.
TX Lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
30
Sending a Fax
5
5
When the option you want is highlighted,
press OK.
Entering Fax mode
5
When the machine is idle, the time and date
appear on the LCD. When you want to send
a fax, or change fax send or receive settings,
Faxing from the ADF
5
press the
blue.
(Fax) key to illuminate it in
a Press
(Fax).
b Place the document face down in the
c Enter the fax number using the dial pad,
Speed Dial or Search.
(For details, see How to Dial
The LCD shows:
d Press Black Start or Color Start.
Fax Resolution
Contrast
Speed Dial
Outgoing Call
Standard
Auto
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
FAX
Fax Press Start
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Faxing from the scanner
glass
5
You can use the scanner glass to fax pages
of a book one at a time. The document can be
up to Letter or A4 size.
To send color faxes with multiple pages use
the ADF.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a Press
(Fax).
b Place your document face down on the
scanner glass. (See Using the scanner
32
Sending a Fax
c Enter the fax number using the dial pad,
Faxing A4 size documents
from the scanner glass
Speed Dial or Search.
5
d Press Black Start or Color Start.
When documents are A4 size, you need to
set the correct Scan Size to A4. If you do not,
the bottom portion of the faxes will be
missing.
„ If you press Black Start, the
machine starts scanning the first
„ If you press Color Start, the
machine starts sending the
document.
a Press
(Fax).
b Press a or b to choose
Glass ScanSize.
e When the LCD asks you Next Page?
do one of the following:
c Press d or c to choose A4 (or Letter).
Press OK.
5
„ To send a single page, press 2 to
choose No (or press Black Start
again).
Note
• You can save the setting you use most
often by setting it as default. (See Setting
The machine starts sending the
document.
„ To send more than one page,
press 1 to choose Yes and go to
• This setting is only available for sending
documents from the scanner glass.
f Place the next page on the scanner
glass.
Color fax transmission
5
Press OK.
The machine starts scanning the page.
additional page.)
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress
5
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
33
Chapter 5
f Press Black Start.
Broadcasting
(Black & White only)
Note
5
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 250 different numbers.
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
After the broadcast is finished, a Broadcast
Report will be printed.
a Press
(Fax).
• If the Out of Memory message
appears, press Stop/Exit to stop the job.
If more than one page has been scanned,
press Black Start to send the portion that
is in the machine’s memory.
b Load your document.
c Press a or b to choose Broadcasting.
Press OK.
d You can add numbers to the broadcast
in the following ways:
„ Press a or b to choose Add Number
and enter the number using the dial
pad.
Press OK.
„ Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK.
Press a or b to select a number and
OK.
e After you have entered all the fax
a or b to choose Complete.
Press OK.
34
Sending a Fax
Canceling a Broadcast in
progress
Additional sending
operations
5
5
a Press Menu.
Sending faxes using multiple
settings
b Press a or b to choose Fax.
Press OK.
5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode, delayed
fax timer, polling transmission and real time
transmission.
c Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialed and the Broadcast job number.
5
a Press
(Fax).
d Press OK.
The LCD will ask you the following
message:
The LCD shows:
Cancel Job?
Fax Resolution
Contrast
Speed Dial
Outgoing Call
Standard
Auto
Yes i Press 1
No
i Press 2
e Press 1 to cancel the number being
dialed.
FAX
Fax Press Start
The LCD will then show the Broadcast
job number.
b Press a or b to choose a setting you
want to change.
f Press OK.
c Press d or c to choose an option.
Press OK.
The LCD will ask you the following
message:
Cancel Job?
Yes i Press 1
settings.
No
i Press 2
Note
g To cancel the Broadcast, press 1.
h Press Stop/Exit.
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
35
Chapter 5
Contrast
5
Changing fax resolution
5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses a suitable
contrast for your document.
The quality of a fax can be improved by
changing the fax resolution.
a Press
(Fax).
Use Light when sending a light document.
Use Dark when sending a dark document.
b Press a or b to choose
Fax Resolution.
c Press d or c to choose the resolution
a Press
(Fax).
you want.
Press OK.
b Press a or b to choose Contrast.
c Press d or c to choose Auto, Light or
Note
Dark.
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
Black & White
Standard
Suitable for most typed
documents.
• When you send a color fax.
Fine
Good for small print and
transmits a little slower than
Standard resolution.
• When you choose Photo as the Fax
Resolution.
S.Fine
Photo
Good for small print or artwork
and transmits slower than Fine
resolution.
Use when the document has
varying shades of gray or is a
photograph. This has the
slowest transmission.
Color
Standard
Suitable for most typed
documents.
Fine
Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
36
Sending a Fax
Dual Access
Overseas Mode
5
(Black & White only)
5
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
a Press
(Fax).
b Load your document.
Note
c Press a or b to choose
Overseas Mode.
5
If the Out of Memory message appears
while scanning a document, press
Stop/Exit to cancel or Black Start to send
the scanned pages.
d Press d or c to choose On (or Off).
Press OK.
Delayed Faxing
(Black & White only)
Real Time Transmission
5
5
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
During the day you can store up to 50 faxes
in the memory to be sent within 24-hours.
These faxes will be sent at the time of day you
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
a Press
(Fax).
b Load your document.
c Press a or b to choose Delayed Fax.
a Press
(Fax).
d Press d or c to choose On.
Press OK.
b Press a or b to choose Real Time TX.
c Press d or c to choose On (or Off).
Press OK.
e Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Note
Press OK.
•
If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real time
(even if Real Time TX is set to Off).
Faxes from the scanner glass cannot be
sent until you clear some of the memory.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
37
Chapter 5
Delayed Batch Transmission
(Black & White only)
want to cancel.
5
g When you are finished, press Stop/Exit.
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
Setting your changes as the
new default
5
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
a Press
(Fax).
b Press a or b to choose Batch TX.
c Press d or c to choose On.
Press OK.
a Press
(Fax).
b Press a or b to choose your new setting
you want to change, and then press
d or c to choose the new option.
Press OK.
d Press Stop/Exit.
Checking and canceling
waiting jobs
5
Repeat this step for each setting you
want to change.
You can check which jobs are still waiting in
the memory to be sent and cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
a Press Menu.
d Press 1 to choose Yes.
e Press Stop/Exit.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e Do one of the following:
„ To cancel, press 1 to choose Yes.
If you want to cancel another job go
„ To exit without canceling, press 2 to
choose No.
38
Sending a Fax
Restoring all settings to the
factory settings
Sending a fax at the end of a
conversation
5
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
a Press
(Fax).
b Press a or b to choose
Factory Reset.
Press OK.
b Press
(Fax).
c Press 1 to choose Yes.
d Press Stop/Exit.
c Load your document.
5
d Press Black Start or Color Start.
„ If you are using the scanner glass,
press 1 to send a fax.
Sending a fax manually
5
e Replace the handset of the external
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
phone.
Out of Memory message
5
Note
To send a multiple page fax, use the ADF.
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
a Press
(Fax).
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Black Start or
Color Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
b Load your document.
c To listen for a dial tone press Hook or
pick up the handset of the external
telephone.
d Dial the fax number.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
e When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass
press 1 to send a fax.
f If you picked up the handset of an
external telephone, replace it.
39
Receiving a Fax
6
6
Receive modes
6
Choose the correct Receive Mode
6
The correct Receive Mode is determined by the external devices and telephone subscriber
services (Voice Mail, Distinctive Ring, etc.) you have (or will be using) on the same line as the
Brother machine.
Will you be using a Distinctive Ring number for receiving faxes?
Brother uses the term “Distinctive Ring” but different telephone companies may have other names for this
service, such as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Ring, Ident-A-Call,
Data Ident-A-Call, Smart Ring and SimpleBiz Fax & Alternate Number Ringing. (See Distinctive Ring
on page 54 for instruction on setting up your machine using this feature.)
Will you be using Voice Mail on the same telephone line as your Brother machine?
If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility
that Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Will you be using a Telephone Answering Device on the same telephone line as your Brother
machine?
Your external telephone answering device (TAD) will automatically answer every call. Voice messages are
stored on the external TAD and fax messages are printed. Choose External TAD as your receive mode.
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Choose Fax Only as your receive mode.
Will you be using your Brother machine on the same line as your telephone?
Do you want to receive voice calls and faxes automatically?
The Fax/Tel receive mode is used when sharing the Brother machine and your telephone on the
Important Note: You cannot receive voice messages on either Voice Mail or an answering machine
with the Fax/Tel mode.
Do you expect to receive very few faxes?
Choose Manual as your receive mode. You control the telephone line and must answer every call
40
Receiving a Fax
To set the receive mode follow the instructions below:
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Receive Mode.
d Press d or c to choose Fax Only, Fax/Tel, External TAD or Manual.
Press OK.
e Press Stop/Exit.
The LCD will show the current receive mode.
6
41
Chapter 6
External TAD
6
Using receive modes
6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be handled in one of
the following ways:
Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
„ Faxes will be automatically received.
Fax Only
6
„ Voice callers can record a message on the
external TAD.
Fax Only mode will automatically answer
every call as a fax call.
(For more information see Connecting an
Fax/Tel
6
Fax/Tel mode helps you automatically
manage incoming calls, by recognizing
whether they are fax or voice calls and
handling them in one of the following ways:
„ Faxes will be automatically received.
„ Voice calls will start the F/T Ring to tell you
to pick up the line. The F/T Ring is a fast
pseudo/double-ring made by your
machine.
(Also see F/T Ring Time (Fax/Tel mode only)
Manual
6
Manual mode turns off all automatic
answering functions unless you are using the
Distinctive Ring feature.
To receive a fax in manual mode lift the
handset of the external telephone or press
Hook. When you hear fax tones (short
repeating beeps), press Black Start or
Color Start and choose Receive. You can
also use the Easy Receive feature to receive
faxes by lifting a handset on the same line as
the machine.
42
Receiving a Fax
F/T Ring Time
(Fax/Tel mode only)
Receive mode settings
6
6
Ring Delay
6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
The Ring Delay sets the number of times the
machine rings before it answersin Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, keep the ring delay setting of
4 rings.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the
F/T Ring it means that you have a voice caller
on the line.
a Press Menu.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring; however, you can still answer the
call on any telephone. (For more information
6
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
d Press a or b to choose Ring Delay.
e Press d or c to choose how many times
c Press a or b to choose
Setup Receive.
Press OK.
the line rings before the machine
answers.
Press OK.
If you choose 0, the line will not ring at
all.
d Press a or b to choose
F/T Ring Time.
f Press Stop/Exit.
e Press d or c to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
f Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
43
Chapter 6
Easy Receive
6
Memory Receive
(Black & White only)
6
If Easy Receive is On:
6
You can only use one Memory Receive
operation at a time.
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
„ Fax Forwarding
„ Paging
„ Fax Storage
„ PC Fax Receive
„ Off
If Easy Receive is Off:
6
If you are at the machine and answer a call
first by lifting a handset, then press
Black Start or Color Start, and then press 2
to receive.
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the memory
receive operation, a question will appear on
the LCD. (See Changing Memory Receive
If you answered at an extension telephone
Fax Forwarding
6
Note
• If this feature is set to On, but your
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the fax receive code l 5 1.
• If you send faxes from a computer on the
same telephone line and the machine
a Press Menu.
intercepts them, set Easy Receive to Off.
b Press a or b to choose Fax.
Press OK.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
d Press a or b to choose Easy Receive.
e Press a or b to choose Fax Forward.
Press OK.
e Press d or c to choose On (or Off).
Press OK.
f Enter the forwarding number (up to
f Press Stop/Exit.
20 digits).
Press OK.
44
Receiving a Fax
g Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
f Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
IMPORTANT
1 8 0 0 5 5 5 1 2 3 4 # #
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
g Do one of the following:
„ If you are programming your cell
phone number and do not need to
enter a pin, press OK.
„ If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
and then enter your fax number
followed by # #.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
6
Press OK.
For example, press:
h Press Stop/Exit.
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5
5 6 7 8 9 # #
Paging
6
„ If your pager does not need a PIN,
press:
When you choose Paging, your machine
dials the cell phone or pager number you
have programmed. This activates your cell
phone or pager so you will know that you
have a fax message in the memory.
Redial/Pause, and then enter your
fax number followed by # #. Press
OK.
For example, press:
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
h Press Stop/Exit.
a Press Menu.
Note
b Press a or b to choose Fax.
Press OK.
You cannot change a paging number or
PIN remotely.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Paging.
Press OK.
45
Chapter 6
Fax Storage
6
PC Fax Receive
(Windows only)
®
6
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The number of received faxes
that are stored in the memory will appear at
the bottom left side of the LCD.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide on the
CD-ROM.)
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Fax Storage.
Press OK.
If you choose Backup Print:On the
machine will also print the fax.
f Press Stop/Exit.
a Press Menu.
Note
Color faxes cannot be stored in the
memory. When you receive a color fax
your machine prints the color fax at your
machine.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose
PC Fax Receive.
Press OK.
f Press a or b to choose <USB> or the PC
you want to receive faxes.
Press OK.
46
Receiving a Fax
g Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
g Press a or b to choose <USB>, or the PC
you want to receive faxes.
Press OK.
h Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
h Press Stop/Exit.
Note
• PC Fax Receive is not supported in the
Mac OS.
i Press Stop/Exit.
• Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX Receiving in the Software
User’s Guide on the CD-ROM.)
Turning off Memory Receive
Operations
6
a Press Menu.
6
b Press a or b to choose Fax.
Press OK.
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
c Press a or b to choose
Setup Receive.
Press OK.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to your
PC.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Off.
Press OK.
Changing the destination PC
6
f Press Stop/Exit.
a Press Menu.
Note
b Press a or b to choose Fax.
Press OK.
The LCD will give you more options if
there are received faxes still in your
machine’s memory. (See Changing
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose
PC Fax Receive.
Press OK.
f Press a or b to choose Change.
Press OK.
47
Chapter 6
Changing Memory Receive
Operations
Additional receiving
operations
6
6
If received faxes remain in your machine’s
memory when you change the Memory
Receive Operations, the LCD will ask you
one of the following questions:
Printing a reduced incoming
fax
6
„ Erase All Fax?
Yes i Press 1
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of Letter, Legal or A4 size paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
No
i Press 2
„ Print All Fax?
Yes i Press 1
a Press Menu.
No
i Press 2
• If you press 1, faxes in the memory will
be erased or printed before the setting
changes. If a backup copy has already
b Press a or b to choose Fax.
Press OK.
been printed it will not be printed again.
c Press a or b to choose
Setup Receive.
Press OK.
• If you press 2, faxes in the memory will
not be erased or printed and the setting
will be unchanged.
d Press a or b to choose
Auto Reduction.
If received faxes are left in the machine's
memory when you change to
PC Fax Receive from another option
[Fax Forward, Paging or Fax Storage],
press a or b to choose the PC.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
The LCD will ask you the following question:
„ Send Fax to PC?
Yes i Press 1
No
i Press 2
• If you press 1, faxes in the memory will
be sent to your PC before the setting
changes. You will be asked if you want
to turn on Backup Print. (For detail, see
• If you press 2, faxes in the memory will
not be erased or transferred to your PC
and the setting will be unchanged.
48
Receiving a Fax
Receiving a fax at the end of a
conversation
Printing a fax from the
memory
6
6
At the end of a conversation you can ask the
other party to fax you information before you
both hang up.
If you have chosen Paging or Fax Storage,
you can still print a fax from the memory when
you are at your machine. (See Memory
a Ask the other party to place the
document in their machine and to press
the Start or Send key.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
b When you hear the other machine's
CNG tones (slowly repeating beeps),
press Black Start or Color Start.
c Press a or b to choose Print Fax.
Press OK.
c Press 2 to receive the fax.
d Press Black Start.
e Press Stop/Exit.
6
d Replace the handset of the external
telephone.
Note
Receiving faxes into memory
when paper tray is empty
When you print a fax from the memory, the
fax data will be erased.
6
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
49
Chapter 6
Using your Remote Access
Code
Remote Retrieval
6
6
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
a Dial your fax number from a touch tone
telephone or another fax machine.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
Setting a Remote Access
Code
6
c The machine signals if it has received
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is inactive code (--- ).
messages:
„ 1 long beep — Fax messages
„ No beeps — No messages
d When the machine gives two short
beeps, enter a command.
a Press Menu.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remote Access.
e Press 9 0 to stop Remote Access when
you have finished.
d Enter a three-digit code using numbers
0-9, l, or #.
f Hang up.
Press OK. (The preset ‘ ’ cannot be
changed.)
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.
Note
Do not use the same code as your Fax
Receive Code (l 5 1) or Telephone
e Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press Clear/Back in
and press OK.
50
Receiving a Fax
Remote Fax commands
6
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by ), the system will give
two short beeps and you must enter a remote command.
Remote commands
95 Change the Fax Forwarding,
Operation details
Paging or Fax Storage settings
1 OFF
You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding
3 Paging
One long beep means the change is accepted. If you hear
three short beeps, you cannot change because something
has not been set up (for example, a Fax Forwarding or
Paging number has not been registered). You can register
your Fax Forwarding number by entering 4. (See Changing
registered the number, Fax Forwarding will work.
4 Fax Forwarding number
6 Fax Storage
6
96
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
97
98
Check the receiving status
1 Fax
You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
Change the Receive Mode
1 External TAD
2 Fax/Tel
If you hear one long beep, your change has been accepted.
3 Fax Only
90
Exit
Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
51
Chapter 6
Retrieving fax messages
6
Changing your Fax
Forwarding number
6
You can call your machine from any touch
tone telephone and have your fax messages
sent to a machine. Before you use this
feature, you have to turn on Fax Storage.
You can change the default setting of your fax
forwarding number from another touch tone
telephone or fax machine.
a Dial your fax number.
a Dial your fax number.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
c When you hear two short beeps,
press 9 6 2.
c When you hear two short beeps,
press 9 5 4.
d Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by # #
(up to 20 digits).
d Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
Note
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
e Press 9 0 to stop Remote Access when
you have finished.
f Hang up after you hear your machine
beep.
52
Telephone Services and External
devices
7
7
Voice operations
7
Telephone services
7
Voice calls can be made either with an
external telephone, by dialing manually, or by
using Quick Dial numbers.
Your machine supports the Caller ID and
Distinctive Ring subscriber telephone
services that some telephone companies
offer.
Features like Voice Mail, Call Waiting, Call
Waiting/Caller ID, RingMaster, answering
services, alarm systems or other custom
features on one telephone line may create
problems with the operation of your machine.
If you have Voice Mail on your telephone line,
please read the following carefully.
Tone or Pulse (Canada only)
7
If you have a Pulse dialing service, but need
to send tone signals (for example, for
telephone banking), follow the instructions
below:
a Pick up the handset of an external
telephone or press Hook.
Voice Mail
7
7
b Press # on the machine’s control panel.
Any digits dialed after this will send tone
signals.
If you have Voice Mail on the same telephone
line as your Brother machine, Voice Mail and
the Brother machine will conflict with each
other when receiving incoming calls.
When you hang up, the machine will return to
the Pulse dialing service.
For example, if your Voice Mail is set to
answer after 4 rings and your Brother
machine is set to answer after 2 rings, then
your Brother machine will answer first. This
will prevent callers from being able to leave a
message in your Voice Mail.
Fax/Tel mode
7
When the machine is in Fax/Tel mode, it will
use the F/T Ring (pseudo/double-ringing) to
alert you to pick up a voice call.
Similarly, if your Brother machine is set to
answer after 4 rings and your Voice Mail is set
to answer after 2 rings, then your Voice Mail
will answer first. This will prevent your Brother
machine from being able to receive an
incoming fax, since Voice Mail cannot
transfer the incoming fax back to the Brother
machine.
If you are at the extension telephone, you'll
need to lift the handset during the F/T Ring
and then press # 5 1 between the
pseudo/double-rings. If no one is on the line,
or if someone wants to send you a fax, send
the call back to the machine by pressing
l 5 1.
If you are at the machine, lift the external
telephone’s handset, and then press Hook to
answer.
53
Chapter 7
To avoid conflicts between your Brother
machine and your voice mail service, do one
of the following:
Distinctive Ring
7
Distinctive Ring is a function of your Brother
machine that allows a person with one line to
receive fax and voice calls through two
different phone numbers on that one line.
Brother uses the term “Distinctive Ring”, but
telephone companies market the service
under a variety of names, such as Smart
Ring, Ring Master or Ident-a-Ring. This
service establishes a second telephone
number on the same line as your existing
telephone number, and each number has its
own ring pattern. Typically, the original
number rings with the standard ring pattern
and is used for receiving voice calls, and the
second number rings with a different ring
pattern and is used for receiving faxes.
Get the Distinctive Ring service from your
telephone company. Distinctive Ring is a
feature of your Brother machine that allows a
person with one line to receive fax and voice
calls through two different phone numbers on
that one line. Brother uses the term
‘Distinctive Ring,’ but telephone companies
market the service under a variety of names,
such as Custom Ringing, Personalized Ring,
Smart Ring, RingMaster, Ident-A-Ring, Ident-
A-Call, Data Ident-A-Call, Teen Ring, and
SimpleBiz Fax & Alternate Number Ringing.
This service establishes a second telephone
number on the same line as your existing
telephone number, and each number has its
own ring pattern. Typically, the original
number rings with the standard ring pattern
and is used for receiving voice calls, and the
second number rings with a different ring
pattern and is used for receiving faxes. (See
Note
• You must pay for your telephone
company's Distinctive Ring service before
you program the machine to work with it.
• Please call your telephone company for
availability and rates.
OR
Set your Brother machine’s Receive Mode to
“Manual”. Manual Mode requires that you
answer every incoming call if you want to be
able to receive a fax. If the incoming call is a
telephone call, then complete the call as you
normally would. If you hear fax sending tones
you must transfer the call to the Brother
machine. (See Using external and extension
and voice calls will go to your Voice Mail. (To
set the machine in MANUAL Mode, see
What does your telephone company's
‘Distinctive Ring’ do?
7
Your telephone company's Distinctive Ring
service allows you to have more than one
number on the same telephone line. If you
need more than one telephone number, it
is cheaper than paying for an extra line.
Each telephone number has its own
distinctive ring pattern, so you will know
which telephone number is ringing. This is
one way you can have a separate telephone
number for your machine.
What does Brother's ‘Distinctive Ring’
do?
7
The Brother machine has a Distinctive Ring
feature that allows you to use your machine to
take full advantage of the telephone
company's Distinctive Ring service. The new
telephone number on your line can just
receive faxes.
54
Telephone Services and External devices
Do you have Voice Mail?
7
Before you choose the ring pattern to
register
7
If you have Voice Mail on the telephone line
that you will install your new machine on,
there is a strong possibility that Voice Mail
and the machine will conflict with each other
while receiving incoming calls. However, the
Distinctive Ring feature allows you to use
more than one number on your line, so
both Voice Mail and the machine can work
together without any problems. If each one
has a separate telephone number, neither will
interfere with the other's operations.
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Ring
Rings
Pattern
1
2
3
4
long-long
If you decide to get the Distinctive Ring
service from the telephone company, you will
need to follow the directions on next page to
‘register’ the new Distinctive Ring pattern
they give you. This is so your machine can
recognize its incoming calls.
short-long-short
short-short-long
very long
(normal pattern)
Note
7
Note
Ring Pattern #1 is often called Short-Short
and is the most commonly used.
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
You can change or cancel the Distinctive
Ring pattern at any time. You can switch it
off temporarily, and turn it back on later.
When you get a new fax number, make
sure you reset this feature.
„ The machine will only answer calls to its
registered number.
„ The first two rings are silent on the
machine. This is because the fax must
‘listen’ to the ring pattern (to compare it to
the pattern that was ‘registered’). (Other
telephones on the same line will ring.)
„ If you program the machine properly, it will
recognize the registered ring pattern of the
‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
55
Chapter 7
Registering the Distinctive Ring
pattern
Turning off Distinctive Ring
7
7
a Press Menu.
Very Important !
b Press a or b to choose Fax.
Press OK.
After you have set the Distinctive Ring feature
to On, your Distinctive Ring number will
receive faxes automatically. The receive
mode is automatically set to Manual and you
cannot change it to another receive mode
while Distinctive Ring is set to On. This
ensures the Brother machine will only answer
the Distinctive Ring number and not interfere
when your main telephone number is called.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose Distinctive.
Press OK.
e Press a or b to choose Off.
Press OK.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
f Press Stop/Exit.
Note
c Press a or b to choose
Miscellaneous.
Press OK.
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choose the correct
d Press a or b to choose Distinctive.
Press OK.
e Press a or b to choose Set.
Press OK.
f Press a or b to choose the stored ring
pattern you want to use.
Press OK.
(You hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
g Press Stop/Exit.
Distinctive Ring is now set to On.
56
Telephone Services and External devices
Setting up your area code (USA only)
7
Caller ID
7
When returning calls from the caller ID history
your machine will automatically dial “1” plus
the area code for all calls. If your local dialing
plan requires that the “1” not be used for calls
within your area code enter your area code in
this setting. With the area code setting, calls
returned from the caller ID history to your
area code will be dialed using 10 digits (area
code + 7-digit number). If your dialing plan
does not follow the standard 1 + area code
+ 7-digit number dialing system for calling
outside your area code, you may experience
problems returning calls automatically from
the caller ID history. If this is not the
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. Call your telephone
company for details. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the LCD shows the
telephone number of your caller (and name, if
available). Once you answer a call, the Caller
ID information disappears from the LCD, but
the call information stays stored in the Caller
ID memory.
You can view the list or choose one of these
numbers to fax to, add to Speed Dial or delete
from the history. (See Caller ID history
procedure followed by your dialing plan, you
will not be able to return calls automatically.
a Press Menu.
7
„ You can see the first 18 characters of the
b Press a or b to choose Fax.
Press OK.
number (or name).
„ The # Unavailable message means
the call originated outside your Caller ID
service area.
c Press a or b to choose
Miscellaneous.
Press OK.
„ The Private Call message means the
caller has intentionally blocked
d Press a or b to choose Caller ID.
Press OK.
transmission of information.
You can print a list of the Caller ID information
received by your machine. (See How to print
e Use the dial pad to enter your area code.
Press OK.
f Press Stop/Exit.
Note
• This feature may not be available in
certain areas of the USA and Canada.
• The Caller ID service varies with different
carriers. Call your local telephone
company to find out about the kind of
service available in your area.
57
Chapter 7
• If You Do Not Subscribe to Distinctive
Connecting an external
TAD (telephone
answering device)
Ring Service:
You must plug your TAD into the EXT.
jack of your machine. If your TAD is
plugged into a wall jack, both your
machine and the TAD will try to control the
telephone line. (See the illustration
below.)
7
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes
over the call and receives the fax. If it does
not hear CNG tones, the machine lets the
TAD continue playing your outgoing message
so your caller can leave you a voice
message.
• Before you connect the external TAD,
remove the protective cap (2) from the
EXT. jack on the machine.
1
1
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax ‘handshake’. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
2
1
2
TAD
Protective Cap
When the TAD answers a call, the LCD
shows Telephone.
Note
• If you do not receive all your faxes,
shorten the Ring Delay setting on your
external TAD.
IMPORTANT
DO NOT connect a TAD elsewhere on the
same telephone line.
• If You Subscribe to your Telephone
company's Distinctive Ring Service:
You may connect an external TAD to a
separate wall jack only if you subscribe to
your telephone company's Distinctive
Ring service, have registered the
distinctive ring pattern on your machine,
and use that number as a fax number. The
recommended setting is at least four rings
on the external TAD when you have the
telephone company's Distinctive Ring
Service. You cannot use the Toll Saver
setting.
58
Telephone Services and External devices
Connections
7
Recording an outgoing
message (OGM) on an
external TAD
The external TAD must be plugged into the
jack labeled EXT. Your machine cannot work
properly if you plug the TAD into a wall jack
(unless you are using Distinctive Ring).
7
Timing is important in recording this
message. The message sets up the ways to
handle both manual and automatic fax
reception.
a Plug the telephone line cord from the
telephone wall jack into the jack labeled
LINE.
a Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b Remove the protective cap (1) from the
jack labeled EXT, and then plug the
telephone line cord from the external
TAD into the EXT. jack. (Make sure this
cord is connected to the TAD at the
TAD's telephone line jack, and not its
handset jack.)
b Limit your speaking to 20 seconds.
c End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
‘After the beep, leave a message or
7
send a fax by pressing l 5 1 and Start.’
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
1
c Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
d Record the outgoing message on your
external TAD.
e Set the TAD to answer calls.
f Set the Receive Mode to
59
Chapter 7
Converting telephone wall outlets
7
Special line considerations
7
There are three ways to convert to an RJ11
jack. The first two ways may require help from
the telephone company. You can change the
wall outlets from one RJ14 jack to two RJ11
jacks. Or you can have an RJ11 wall outlet
installed and slave or jump one of the
telephone numbers to it.
Roll over telephone lines
7
A roll over telephone system is a group of two
or more separate telephone lines that pass
incoming calls to each other if they are busy.
The calls are usually passed down or ‘rolled
over’ to the next available telephone line in a
preset order.
The third way is the easiest: Buy a triplex
adapter. You can plug a triplex adapter into
an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a
third RJ14 jack (Lines 1 and 2). If your
machine is on Line 1, plug the machine into
L1 of the triplex adapter. If your machine is on
Line 2, plug it into L2 of the triple adapter.
Your machine can work in a roll over system
as long as it is the last number in the
sequence, so the call cannot roll away. Do not
put the machine on any of the other numbers;
when the other lines are busy and a second
fax call is received, the fax call will be sent to
a line that does not have a fax machine. Your
machine will work best on a dedicated
line.
Triplex Adapter
7
RJ14
Two-line telephone system
7
A two-line telephone system is nothing more
than two separate telephone numbers on the
same wall outlet. The two telephone numbers
can be on separate jacks (RJ11) or mixed into
one jack (RJ14). Your machine must be
plugged into an RJ11 jack. RJ11 and RJ14
jacks may be equal in size and appearance
and both may contain four wires (black, red,
green, yellow). To test the type of jack, plug in
a two-line telephone and see if it can access
both lines. If it can, you must separate the line
for your machine. (See Easy Receive
RJ11
RJ14
60
Telephone Services and External devices
d Plug one end of the second telephone
line cord for your TAD into the L2 jack of
the two-line TAD. Plug the other end into
the EXT. jack on the left side of the
machine.
Installing machine, external two-line
TAD and two-line telephone
7
When you are installing an external two-line
telephone answering device (TAD) and a
two-line telephone, your machine must be
isolated on one line at both the wall jack and
at the TAD. The most common connection is
to put the machine on Line 2, which is
1
2
explained in the following steps. The back of
the two-line TAD must have two telephone
jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three
telephone line cords, the one that came with
your machine and two for your external two-
line TAD. You will need a fourth line cord if
you add a two-line telephone.
4
3
1
2
3
4
Triplex Adapter
Two Line Telephone
External Two Line TAD
Machine
a Put the two-line TAD and the two-line
You can keep two-line telephones on other
wall outlets as always. There are two ways to
add a two-line telephone to the machine's
wall outlet. You can plug the telephone line
cord from the two-line telephone into the
L1+L2 jack of the triplex adapter. Or you can
plug the two-line telephone into the TEL jack
of the two-line TAD.
telephone next to your machine.
7
b Plug one end of the telephone line cord
for your machine into the L2 jack of the
triplex adapter. Plug the other end into
the LINE jack on the back of the
machine.
c Plug one end of the first telephone line
cord for your TAD into the L1 jack of the
triplex adapter. Plug the other end into
the L1 or L1/L2 jack of the two-line TAD.
Multi-line connections (PBX)
7
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate properly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
61
Chapter 7
Using external and extension
telephones
External and extension
telephones
7
7
Using extension telephones
Connecting an external or
extension telephone
If you answer a fax call at an extension
telephone, you can make your machine
receive the fax by pressing the Fax Receive
Code l 5 1.
7
You can connect a separate telephone to
your machine as shown in the diagram below.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at an extension telephone by
pressing the Telephone Answer Code # 5 1.
Connect the telephone line cord to the jack
labeled EXT.
Before you connect the external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
Using an external telephone
(connected to the EXT. jack of the
machine)
1
2
If you answer a fax call at the external
telephone connected to the EXT jack of the
machine, you can make the machine receive
the fax by pressing Black Start and choose
Receive.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
3
If you answer a call and no one is on
the line:
1
2
3
Extension telephone
External telephone
Protective Cap
7
You should assume that you're receiving a
manual fax.
When you are using a telephone on the same
phone line, the LCD shows Telephone.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
62
Telephone Services and External devices
Changing the remote codes
7
Using a non-Brother cordless
external telephone
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
7
If your non-brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to send the call to the cordless handset.
c Press a or b to choose
Setup Receive.
Press OK.
Using remote codes
7
d Press a or b to choose Remote Codes.
Fax Receive code
7
e Press d or cto choose On (or Off).
Press OK.
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by dialing the Fax Receive Code
l 5 1. Wait for the chirping sounds and then
replace the handset. (See Easy Receive
7
f Enter the new Fax Receive Code.
Press OK.
g Press a or b to choose Tel Answer:
and enter the new Telephone Answer
If you answer a fax call at the external
telephone connected to the EXT jack of the
machine, you can make the machine receive
the fax by pressing Black Start and choosing
Receive.
Code.
Press OK.
h Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as # # # and 9 9 9).
Telephone Answer Code
7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(pseudo/double) ring after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
• Remote Codes might not work with some
telephone systems.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone
connected to the EXT jack of the machine by
pressing Hook.
63
Dialing and storing numbers
8
8
d Press a or b to choose the number you
How to Dial
8
want to dial.
Press OK.
Manual dialing
8
Note
Press all of the digits of the fax or telephone
number.
If the LCD shows Not Registered
when you enter or search a Speed Dial
number, a number has not been stored at
this location.
Search
8
You can search for names you have stored in
the Speed Dial memory.
a Press (Speed Dial).
Or, you can press
(Fax) and then
press a or b to choose Speed Dial
and press OK.
Speed Dialing
8
b Press a or b to choose Search.
Press OK.
a Press (Speed Dial).
c Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Note
Or, you can press
(Fax) and then
• Press l to make the LCD font size larger.
• Press # to make the LCD font size smaller.
press a or b to choose Speed Dial
and press OK.
Press a or b to choose Search.
Press OK.
b
d If you chose Alphabetical Order in
letter of the name, and then press a or b
to choose the name and number you
want to call.
c Do one of the following:
„ Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Press OK.
„ Press the two-digit Speed Dial
number using the dial pad. (See
64
Dialing and storing numbers
Fax Redial
8
Outgoing Call
8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to a number you
recently dialed, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
Speed Dial or delete from the history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(Fax).
Redial/Pause only works if you dialed from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial once after
five minutes.
b Press a or b to choose the number you
want.
Press OK.
c Do one of the following:
a Press Redial/Pause.
„ To send a fax, press a or b to choose
Send a fax.
b Press a or b to choose the number you
want to redial.
Press OK.
Press OK.
Press Black Start or Color Start.
c Press a or b to choose Send a fax.
Press OK.
„ If you want to store the number,
press a or b to choose
8
Add to Speed Dial.
d Press Black Start or Color Start.
Press OK.
Note
In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
„ Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
d Press Stop/Exit.
65
Chapter 8
Caller ID history
8
Storing numbers
8
This feature requires the Caller ID subscriber
service offered by many local telephone
You can set up your machine to do the
following types of easy dialing: Speed Dial
and Groups for broadcasting faxes. When
you dial a Quick Dial number, the LCD shows
the name, if you stored it, or the number.
The number, or name if available, from the
last 30 faxes and telephone calls you
received will be stored in the Caller ID history.
You can view the list or choose one of these
numbers to fax to, add to Speed Dial or delete
from the history. When the thirty-first call
comes in to the machine, it replaces
Note
If you lose electrical power, the Quick Dial
numbers that are in the memory will not be
lost.
information about the first call.
Storing a pause
8
a Press
(Fax).
b Press a or b to choose
Caller ID hist.
Press OK.
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialing
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
c Press a or b to choose the number you
want.
Press OK.
Storing Speed Dial numbers
8
d Do one of the following:
„ To send a fax, press a or b to choose
Send a fax.
Names and numbers can be stored in
two-digit Speed Dial locations. You can store
up to 100 different Speed Dial numbers.
When you dial you will only have to press a
Press OK.
Press Black Start or Color Start.
„ If you want to store the number,
press a or b to choose
few keys (for example:
(Speed Dial),
Search, OK, the 2-digit number, and
Black Start or Color Start).
Add to Speed Dial.
Press OK.
a Press (Speed Dial).
b Press a or b to choose
Set Speed Dial.
Press OK.
„ Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
e Press Stop/Exit.
c Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Note
• (USA only) If you redial from the Caller ID
history outside your area code, you must
set up your AREA CODE in advance.
Press OK.
• You can print the Caller ID List.
66
Dialing and storing numbers
d Do one of the following:
Storing Speed Dial numbers from
Outgoing Calls
8
„ Enter the name (up to 16 characters)
using the dial pad.
You can also store Speed Dial numbers from
the Outgoing Call history.
Press OK.
(To help you enter letters, see
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(Fax).
„ To store the number without a name,
press OK.
b Press a or b to choose the name or
number you want to store.
Press OK.
e Enter the fax or telephone number (up to
20 digits).
Press OK.
c Press a or b to choose
Add to Speed Dial.
Press OK.
f Do one of the following:
„ Enter the second fax or telephone
number (up to 20 digits).
d Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Press OK.
„ If you do not want to store a second
number, press OK.
Press OK.
e Do one of the following:
8
g Press a or b to choose Complete.
Press OK.
„ Enter the name (up to 16 characters)
using the dial pad.
h Do one of the following:
Press OK.
„ To store another Speed Dial
(To help you enter letters, see
„ If you are finished storing numbers,
press Stop/Exit.
„ To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Do one of the following:
„ Enter the second fax or telephone
number (up to 20 digits).
Press OK.
„ If you do not want to store a second
number, press OK.
h Press a or b to choose Complete.
Press OK.
i Press Stop/Exit.
67
Chapter 8
i Press a or b to choose Complete.
Press OK.
Storing Speed Dial numbers from the
Caller ID history
8
If you have the Caller ID subscriber service
from your telephone company you can also
store Speed Dial numbers from incoming
calls in the Caller ID History. (See Caller ID
j Press Stop/Exit.
Changing Speed Dial names
or numbers
8
You can change or delete a Speed Dial name
or number that has already been stored.
a Press
(Fax).
b Press a or b to choose
Caller ID hist.
Press OK.
a Press (Speed Dial).
b Press a or b to choose
Set Speed Dial.
Press OK.
c Press a or b to choose the number you
want to store.
Press OK.
c Press a or b to choose the 2-digit
d Press a or b to choose
Add to Speed Dial.
Press OK.
Speed Dial location you want to change.
Press OK.
d Do one of the following:
e Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
„ Press a or b to choose Change.
Press OK.
Press OK.
„ Press a or b to choose Delete.
Press OK.
f Do one of the following:
Press 1 to confirm.
„ If you want to store the displayed
name, press OK.
Note
„ Enter the name (up to 16 characters)
How to change the stored name or
number:
using the dial pad.
Press OK.
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
(To help you enter letters, see
„ To store the number without a name,
press OK.
g Press OK to confirm the fax or
e If you want to change the name, press
a or b to choose Name, then press c and
enter the new name using the dial pad
(up to 16 characters).
telephone number.
h Do one of the following:
„ Enter the second fax or telephone
Press OK.
number (up to 20 digits).
Press OK.
„ If you do not want to store a second
number, press OK.
68
Dialing and storing numbers
f If you want to change the first Fax/Tel
number, press a or b to choose
Fax/Tel1: or Fax/Tel2:, then press
c and enter the new fax or telephone
number using the dial pad (up to
20 digits).
c Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d Press a or b to choose the two-digit
Speed Dial location where you want to
store the Group.
g Do one of the following:
„ Enter the second new fax or
Press OK.
telephone number (up to 20 digits).
Press OK.
e If you want to change the Group name,
press a or b to choose
„ If you do not want to change the
second number, press OK.
Change Group Name and press OK.
Then enter the new Group name and
press OK.
h Press a or b to choose Complete.
Press OK.
f Press a or b to choose Add Number.
Press OK.
i Press Stop/Exit.
g To add numbers to the group, press
a or b to choose
Setting up groups for
broadcasting
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
8
8
Groups, which can be stored on a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
h Do one of the following:
„ To add another number to the group,
only
(Speed Dial), Search, OK,
the two-digit location and Black Start.
First, you'll need to store each fax number in a
Speed Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a Speed Dial location. You can have
up to six Groups, or you can assign up to
198 numbers in a large Group.
„ If you are finished adding numbers to
the group, press a or b to choose
Complete.
Press OK.
i Do one of the following:
„ To store another Group for
„ To finish storing Groups for
broadcasting, press Stop/Exit.
a Press
(Speed Dial).
Note
b Press a or b to choose Setup Groups.
Press OK.
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
69
Chapter 8
Changing a Group name
8
Deleting a Group
8
a Press (Speed Dial).
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group name
you want to change.
c Press a or b to choose the Group you
want to delete.
Press OK.
Press OK.
d Press a or b to choose
Change Group Name.
Press OK.
d Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
e Press Stop/Exit.
Note
How to change the stored name or
number:
Deleting a number from a Group
8
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group you
want to change.
e Enter the new name (up to
16 characters) using the dial pad.
Press OK.
Press OK.
example, type NEW CLIENTS.)
d Press a or b to choose the number you
want to delete.
Press OK.
Press 1 to confirm.
f Press a or b to choose Complete.
Press OK.
e Press a or b to choose Complete.
Press OK.
g Press Stop/Exit.
f Press Stop/Exit.
70
Dialing and storing numbers
To temporarily change a number, you can
substitute part of the number with manual
dialing using the dial pad. For example, to
change the number to 555-7001 you could
Dialing Access codes and
credit card numbers
8
Sometimes you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
press
(Speed Dial), choose Search,
press 03 and then press 7001 using the dial
pad.
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Speed Dial numbers. You can store these
long dialing sequences by dividing them and
setting them up as separate Speed Dial
numbers in any combination. You can even
include manual dialing using the dial pad.
Note
If you must wait for another dial tone or
signal at any point in the dialing sequence,
create a pause in the number by pressing
Redial/Pause. Each key press adds a
3.5-second delay.
For example, you might have stored ‘555 ’ on
Speed Dial: 03 and ‘7000 ’ on Speed Dial: 02.
You can use them both to dial ‘555-7000’ if
you press the following keys:
a Press
(Speed Dial).
8
b Press a or b to choose Search.
Press OK.
c Enter 03.
d Press a or b to choose Speed Dial.
Press OK.
Note
If you stored 2 numbers in one Speed Dial
location, you will be asked which number
you want to send to.
e Press a or b to choose Search.
Press OK.
f Enter 02.
g Press Black Start or Color Start.
You will dial ‘555-7000 ’.
71
Printing Reports
9
9
e Press d or c to choose On, On+Image,
Fax reports
9
Off or Off+Image.
Press OK.
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
f Press Stop/Exit.
Note
Transmission Verification
Report
• If you choose On+Image or Off+Image
the image will only appear on the
9
Transmission Verification Report if Real
Time Transmission is set to Off. (See Real
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the sender’s name or fax number,
the time and date of transmission, duration of
transmission, number of pages sent, and
whether or not the transmission was
successful.
• If your transmission is successful, "OK" will
appear next to "RESULT" on the
Transmission Verification Report. If
transmission is not successful, "NG" will
appear next to "RESULT".
There are several settings available for the
Transmission Verification Report:
Fax Journal (activity report)
9
„ On: Prints a report after every fax you
send.
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or
24 hours, 2 or 7 days). If you set the interval
to Off, you can still print the report by
following the steps in How to print a report
on page 74. The factory setting is
„ On+Image: Prints a report after every fax
you send. A portion of the fax’s first page
appears on the report.
„ Off: Prints a report only if your fax is
unsuccessful due to a transmission error.
Off is the default setting.
Every 50 Faxes.
a Press Menu.
„ Off+Image: Prints a report only if your
fax is unsuccessful due to a transmission
error. A portion of the fax’s first page
appears on the report.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Report Setting.
Press OK.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
d Press a or b to choose
Journal Period.
c Press a or b to choose
Report Setting.
Press OK.
d Press a or b to choose Transmission.
72
Printing Reports
e Press d or c to choose an interval.
Press OK.
Reports
9
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
The following reports are available:
„ Transmission
If you choose Every 50 Faxes, go to
Prints a Transmission Verification Report
for your last transmission.
„ 6, 12, 24 hours, 2 or 7 days
„ Help List
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
A help list showing how to program your
machine.
„ Quick Dial
machine's memory becomes full with
200 jobs before the time you chose
has passed, the machine will print
the Journal early and then erase all
jobs from the memory. If you want an
extra report before it is due to print,
you can print it without erasing the
jobs from the memory.
Lists names and numbers stored in the
Speed Dial memory, in alphabetical or
numerical order.
„ Fax Journal
Lists information about the last incoming
and outgoing faxes.
(TX: Transmit.) (RX: Receive.)
„ Every 50 Faxes
„ User Settings
The machine will print the Journal
when the machine has stored
50 jobs.
Lists your settings.
„ Network Config
Lists your Network settings.
„ Caller ID hist.
9
f Enter the time to start printing in 24-hour
format.
Press OK.
Lists the available Caller ID information
about the last 30 received faxes and
telephone calls.
(For example: enter 19:45 for 7:45 PM.)
g Press Stop/Exit.
73
Polling
10
10
Sequential polling
(Black & White only)
Polling overview
10
10
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
to work. Not all fax machines support polling.
a Press
(Fax).
b Press a or b to choose Polling RX.
Polling receive
10
c Press d or c to choose On (or Off).
Press OK.
Polling receive lets you call another fax
machine to receive a fax.
d Press a or b to choose Broadcasting.
Press OK.
Setup to receive polling
10
e Do one of the following:
„ Press a or b to choose Add Number
and enter the number using a dial
pad.
a Press
(Fax).
b Press a or b to choose Polling RX.
Press OK.
c Press d or c to choose On (or Off).
Press OK.
„ Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
10
d Enter the fax number you are polling.
Numerical Order and OK. Press
a or b to select a number and OK.
e Press Black Start or Color Start.
The LCD shows Dialing.
f After you have entered all the fax
a or b to choose Complete.
Press OK.
g Press Black Start.
The machine polls each number or
Group number in turn for a document.
Press Stop/Exit while the machine is dialing
to cancel the polling process.
To cancel all sequential polling receive jobs,
75
Chapter 10
Polled transmit
(Black & White only)
10
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
Setup for polled transmit
10
a Press
(Fax).
b Load your document.
c Press a or b to choose Polled TX.
d Press d or c to choose On (or Off).
Press OK.
e Press a or b to choose any settings you
want to change.
Press OK.
After each setting is accepted, you can
continue to change more settings.
f Press Black Start.
g If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
„ Press 1 to send another page.
„ Press 2 or Black Start to send the
document.
h Place the next page on the scanner
each additional page.
Your machine will automatically send
the fax.
76
Making copies
11
11
When the option you want is highlighted,
press OK.
How to copy
11
Note
Entering Copy mode
11
• The default made is Fax. You can change
the amount of time that the machine stays
in Copy mode after the last copy
When you want to make a copy, press
(Copy) to illuminate it in blue.
• Book Copy, Watermark Copy and
Ink Save Mode features are supported
by technology from Reallusion, Inc.
Making a single copy
11
The LCD shows:
1
01
a Press
(Copy).
Quality
Normal
100%
Enlarge/Reduce
Ratio:
Paper Type
b Load your document.
Plain Paper
COPY
Copy
Press Start
c Press Black Start or Color Start.
1
No. of Copies
You can enter the number of copies you want
by using the dial pad.
Making multiple copies
11
Press a or b to scroll through the Copy key
options.
You can make up to 99 copies in one print run.
(Copy).
a Press
b Load your document.
c Enter the number of copies you want.
d Press Black Start or Color Start.
Note
To sort the copies, press a or b to choose
Stop copying
11
To stop copying, press Stop/Exit.
78
Making copies
a Press
(Copy).
Copy settings
11
b Load your document.
You can change the copy settings temporarily
for the next copy.
c Enter the number of copies you want.
d Press a or b to choose Quality.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying, unless you have set
the Mode Timer to 30 seconds or less. (See
e Press d or c to choose Fast, Normal or
Best.
Press OK.
If you have finished choosing settings, press
Black Start or Color Start.
f If you do not want to change additional
settings, press Black Start or
Color Start.
If you want to choose more settings, press
a or b.
Note
Enlarging or reducing the
image copied
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
11
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
Changing copy quality
11
a Press
(Copy).
You can choose from a range of quality. The
factory setting is Normal.
b Load your document.
„ Fast
c Enter the number of copies you want.
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
d Press a or b to choose
Enlarge/Reduce.
11
e Press d or c to choose 100%, Enlarge,
Reduce, Fit to Page or
„ Normal
Custom(25-400%).
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
„ Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
79
Chapter 11
f Do one of the following:
Making N in 1 copies or a
poster (Page Layout)
„ If you chose Enlarge or Reduce,
press OK and press d or c to choose
the enlargement or reduction ratio
you want.
11
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
Press OK.
„ If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Press OK.
„ If you chose 100% or Fit to Page,
IMPORTANT
198% 4"x6"iA4
186% 4"x6"iLTR
104% EXEiLTR
100%
• Make sure the paper size is set to Letter or
A4.
• You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
46% LTRi4"x6"
Fit to Page
Custom(25-400%)
• If you are producing multiple color copies,
N in 1 copy is not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
g If you do not want to change additional
settings, press Black Start or
Color Start.
Note
Watermark Copy, Book Copy, Sort,
Ink Save Mode and Enlarge/Reduce
are not available with Page Layout.
Note
• Page Layout is not available with
Enlarge/Reduce.
a Press
(Copy).
• Page Layout, Book Copy, Sort and
Watermark Copy are not available with
Fit to Page.
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
e Press d or c to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
Poster(3 x 3).
• Fit to Page is not available for a Legal
Press OK.
size document.
80
Making copies
f If you do not want to change additional
settings, press Black Start or
Place the document face down in the
direction shown below:
Color Start to scan the page.
„ 2 in 1 (P)
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
„ 2 in 1 (L)
If you are using the scanner glass, go
g After the machine scans the page,
press 1 to scan the next page.
„ 4 in 1 (P)
h Place the next page on the scanner
glass.
Press OK.
„ 4 in 1 (L)
the layout.
j After all the pages have been scanned,
press 2 to finish.
„ Poster (3 x 3)
You can make a poster size copy of a
photograph.
Note
If photo paper has been chosen in the
Paper Type setting for N in 1 copies, the
machine will print the images as if Plain
paper had been chosen.
11
81
Chapter 11
Sorting copies using the ADF
11
Adjusting Brightness and
Contrast
11
You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.
Brightness
11
a Press
(Copy).
You can adjust the copy brightness to make
copies darker or lighter.
b Load your document.
a Press
(Copy).
c Enter the number of copies you want.
d Press a or b to choose Stack/Sort.
b Load your document.
e Press d or c to choose Sort.
Press OK.
c Enter the number of copies you want.
d Press a or b to choose Brightness.
f If you do not want to change additional
settings, press Black Start or
Color Start.
e Press d to make a darker copy or
press c to make a lighter copy.
Press OK.
Note
f If you do not want to change additional
settings, press Black Start or
Color Start.
Fit to Page, Page Layout and
Book Copy are not available with Sort.
Contrast
11
You can adjust the copy contrast to help an
image look sharper and more vivid.
a Press
(Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Contrast.
e Press c to increase the contrast or press
d to decrease the contrast.
Press OK.
f If you do not want to change additional
settings, press Black Start or
Color Start.
82
Making copies
f If you do not want to change any
Ink Save Mode
11
additional settings, press Black Start or
Color Start.
Ink Save Mode can help you save some ink.
Your machine detects the edges of the image
and prints the outline of the image.
Note
Watermark Copy, Book Copy and
Page Layout are not available with
Ink Save Mode.
The amount of ink saved will vary depending
on the document.
Ink Save Mode: Off
11
Paper Options
11
Paper Type
11
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Press
(Copy).
Ink Save Mode: On
11
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Type.
e Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
11
f If you do not want to change additional
settings, press Black Start or
Color Start.
a Press
(Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Ink Save Mode.
e Press d or c to choose On (or Off).
Press OK.
83
Chapter 11
Paper Size
11
Book Copy
11
If copying on paper other than Letter size, you
will need to change the paper size setting.
You can copy only on Letter, Legal, A4, A5 or
Photo 4 × 6 in. (10 × 15 cm) paper.
Book copy corrects dark borders and skew
when copying from the scanner glass. Your
machine can correct the data automatically or
you can make specific corrections.
a Press
(Copy).
a Press
(Copy).
b Load your document.
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Size.
c Enter the number of copies you want.
d Press a or b to choose Book Copy.
e Do one of the following:
e Press d or c to choose Letter, Legal,
A4, A5 or 4"x6".
Press OK.
„ If you want to correct the data
yourself, press d or c to choose
On(Preview).
f If you do not want to change additional
settings, press Black Start or
Color Start.
Press Black Start or Color Start
„ If you want the machine to correct
the data automatically, press d or c
f Adjust the skewed data by using # or l.
Remove the shadows by using a or b.
g If you are finished making corrections,
press Black Start or Color Start.
Note
Page Layout, Sort, Ink Save Mode,
Fit to Page and Watermark Copy
are not available with Book Copy.
84
Making copies
Using media card or a USB Flash
memory drive
Watermark Copy
11
11
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks, data from
your media cards or USB Flash memory
drive, or scanned data.
a Press
(Copy).
b Load your document.
c Enter the number of copies you want.
Note
d Press a or b to choose
Watermark Copy.
Press OK.
Fit to Page, Page Layout,
Ink Save Modeand Book Copyare
not available with Watermark Copy.
e Press d or c to choose On.
Using a template
11
f Press a or b to choose
Current Setting.
Press OK.
a Press
(Copy).
b Load your document.
g Insert a media card or USB Flash
memory drive. Press a or b to choose
Media.
c Enter the number of copies you want.
d Press a or b to choose
Watermark Copy.
Press OK.
h Press OK and then press d or c to
choose the data you want to use for the
watermark.
e Press d or c to choose On.
i Press OK and change any additional
settings from the options shown on the
LCD.
f Press a or b to choose
Current Setting.
Press OK.
j If you do not want to change additional
settings, press Black Start or
Color Start.
11
g Press a or b to choose Template.
Press OK.
IMPORTANT
h Change the settings from option on LCD
if you need.
DO NOT take out the memory card or
USB Flash memory drive while
i If you do not want to change additional
settings, press Black Start or
Color Start.
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
85
Chapter 11
Using a scanned paper document as
your watermark
Setting your changes as the
new default
11
11
a Press
(Copy).
You can save the copy settings for Quality,
Enlarge/Reduce, Brightness,
Contrast, Ink Save Modeand
b Enter the number of copies you want.
Page Layoutthat you use most often by
setting them as the default settings. These
settings will stay until you change them again.
c Press a or b to choose
Watermark Copy.
Press OK.
a Press
(Copy).
d Press d or c to choose On.
b Press a or b to choose your new setting.
Press OK.
e Press a or b to choose
Current Setting.
Press OK.
Repeat this step for each setting you
want to change.
f Press a or b to choose Scan. Press OK,
and place the page that you want to use
for watermark on the scanner glass.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
g Press Black Start or Color Start.
d Press 1 to choose Yes.
e Press Stop/Exit.
h Take out the watermark document you
scanned and load the document you
want to copy.
Restoring all settings to the
factory settings
i Press d or c to change the
Transparencyof the watermark.
Press OK.
11
You can restore all the settings you have
changed back to the factory settings. These
settings will stay until you change them again.
j If you do not want to change any
additional settings, press Black Start or
Color Start.
a Press
(Copy).
Note
You cannot enlarge or reduce the
scanned watermark.
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
86
Making copies
‘Out of Memory’
message
11
If the Out of Memorymessage appears
while scanning document, press Stop/Exit to
cancel or Black Start or Color Start to copy
the scanned pages.
You will need to clear some jobs from the
memory before you can continue.
To free up extra memory, do the following:
„ Print the faxes that are in the memory.
When you get an Out of Memory
message, you may be able to make copies if
you first print incoming faxes in the memory to
restore the memory to 100%.
11
87
Chapter 11
88
PhotoCapture Center®: Printing
photos from a memory card or
USB Flash memory drive
12
12
PhotoCapture Center®
Operations
Using a memory card or USB
Flash memory drive
12
12
Your Brother machine has media drives
(slots) for use with the following popular
digital camera media: CompactFlash®,
Memory Stick™, Memory Stick PRO™, SD,
SDHC, xD-Picture Card™ and USB Flash
memory drives.
Printing from a memory card
or USB Flash memory drive
without a PC
12
Even if your machine is not connected to your
computer, you can print photos directly from
digital camera media or a USB Flash memory
CompactFlash®
Memory Stick™
Scanning to a memory card or
USB Flash memory drive
Memory Stick PRO™
without a PC
12
You can scan documents and save them
directly to a memory card or USB Flash
memory drive. (See Scan to a memory card
SD, SDHC
xD-Picture Card™
0.87 in. (22 mm)
or less
®
Using PhotoCapture Center
0.43 in. (11 mm)
or less
from your computer
12
USB Flash memory
drive
You can access a memory card or USB Flash
memory drive that is inserted in the front of
the machine from your computer.
„ miniSD can be used with a miniSD
adapter.
(See PhotoCapture Center® for Windows® or
„ microSD can be used with a microSD
Remote Setup & PhotoCapture Center® for
Macintosh in the Software User's Guide on
the CD-ROM.)
adapter.
„ Memory Stick Duo™ can be used with a
Memory Stick Duo™ adapter.
„ Memory Stick PRO Duo™ can be used
with a Memory Stick PRO Duo™ adapter.
„ Memory Stick Micro™ (M2™) can be
used with a Memory Stick Micro™ (M2™)
adapter.
90
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
„ Adapters are not included with the
Please be aware of the following:
machine. Contact a third party supplier for
adapters.
„ When printing an index or image, the
PhotoCapture Center® will print all valid
images, even if one or more images have
been corrupted. Corrupted images will not
be printed.
„
This product supports xD-Picture Card
™
Type M / Type M+ / Type H (Large Capacity).
„ IBM Microdrive™ is not compatible with
the machine.
„ (memory card users)
„ CompactFlash® Type II is not supported.
Your machine is designed to read memory
cards that have been formatted by a digital
camera.
The PhotoCapture Center® feature lets you
print digital photos from your digital camera at
high resolution to get photo quality printing.
When a digital camera formats a memory
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a memory card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the memory card
we also recommend you use the same
folder your digital camera uses. If the data
is not saved to the same folder, the
machine may not be able to read the file or
print the image.
Memory cards,
USB Flash memory drive and
folder structures
12
Your machine is designed to be compatible
with modern digital camera image files,
memory cards and USB Flash memory drive;
however, please read the points below to
avoid errors:
„ The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
„ (USB Flash memory drive users)
This machine supports USB Flash
memory drives that have been formatted
by Windows®.
„ Direct PhotoCapture Center® printing
must be performed separately from
PhotoCapture Center® operations using
the PC. (Simultaneous operation is not
available.)
12
„ The machine can read up to 999 files on a
memory card or USB Flash memory drive.
„ The DPOF file on the memory cards must
be in a valid DPOF format. (See DPOF
91
Chapter 12
Photo Capture key lights:
Getting started
12
Firmly put a memory card or USB Flash
memory drive into the proper slot.
„ Photo Capture light is on, the memory
card or USB Flash memory drive is
properly inserted.
4 5
1
2
3
„ Photo Capture light is off, the memory
card or USB Flash memory drive is not
properly inserted.
1
USB Flash memory drive
2
3
4
5
CompactFlash®
SD, SDHC
„ Photo Capture light is blinking, memory
card or USB Flash memory drive is being
read or written to.
Memory Stick™, Memory Stick PRO™
xD-Picture Card™
IMPORTANT
IMPORTANT
The USB direct interface supports only a
USB Flash memory drive, a PictBridge
compatible camera, or a digital camera
that uses the USB mass storage standard.
Any other USB devices are not supported.
DO NOT unplug the power cord or remove
the media from the media drive (slot) or
USB direct interface while the machine is
reading or writing to the media (the
Photo Capture key is blinking). You will
lose your data or damage the card.
The machine can only read one memory card
or USB Flash memory drive at a time.
92
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
Entering PhotoCapture mode
12
Print Images
12
After you insert the memory card or USB
Flash memory drive, press the
View Photos
12
(Photo Capture) key to illuminate it in
blue and display the PhotoCapture options on
the LCD.
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
The LCD shows:
View Photo(s)
View photos on the LCD
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Print Index
and select the images
Print Photos
you want to
Enhance Photos
print.
Search by Date
Press
(Photo Capture).
Print All Photos
PHOTO
Select & Press
OK
b Press a or b to choose
View Photo(s).
Press OK.
Press a or b to scroll through the
Photo Capture key options.
c Press d or c to choose your photo.
Note
Instead of scrolling through your photos,
you can use the dial pad to enter the
number of the image from the index page.
d Press a or b to increase or decrease the
number of copies.
Note
If your digital camera supports DPOF
have chosen all the photos.
12
Note
When the option you want is highlighted,
press OK.
Press Clear/Back to go back to the
previous level.
f After you have chosen all the photos, do
one of the following:
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
93
Chapter 12
d Do one of the following:
„ Press a or b to choose
Print Index (Thumbnails)
12
The PhotoCapture Center® assigns numbers
for images (such as No.1, No.2, No.3, and so
on).
Paper Type, and press d or c to
choose the type of paper you are
using, Plain Paper,
Inkjet Paper, Brother BP71or
Other Glossy.
Press OK.
„ Press a or b to choose Paper Size
and press d or c to choose the paper
size you are using, Letteror A4.
The PhotoCapture Center® does not
Press OK.
recognize any other numbers or file names
that your digital camera or computer has
used to identify the pictures. You can print a
„ If you do not want to change the
thumbnail page. This will show all the pictures
on the memory card or USB Flash memory
drive.
e Press Color Start to print.
Printing Photos
12
Note
Before you can print an individual image, you
have to know the image number.
Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press
(Photo Capture).
Press
(Photo Capture).
b Press a or b to choose Print Index.
Press OK.
c Press a or b to choose Print Photos.
Press OK.
c Press a or b to choose
Layout Format. Press d or c to
choose 6 Images/Lineor
5 Images/Line.
d Enter the image number that you want to
print from the Index page (Thumbnails).
Press OK.
Press OK.
6 Images/Line 5 Images/Line
Print time for 5 Images/Linewill be
slower than 6 Images/Line, but the
quality is better.
94
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
Enhance Photos
12
all the image numbers that you want to
print.
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• You can enter multiple numbers at one
time by using the l key for a comma or the
# key for a hyphen. For example, Enter 1,
l, 3, l, 6 to print images No.1, No.3 and
No.6. Enter 1, #, 5 to print images No.1 to
No.5.
Note
• After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
• The Enhance Photos feature is supported
by technology from Reallusion, Inc.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
Auto Correct
12
f After you have chosen all the image
numbers, press OK again.
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
g Enter the number of copies you want
using the dial pad.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
h Do one of the following:
„ Change the print settings. (See
Press
(Photo Capture).
„ If you do not want to change any
settings, press Color Start to print.
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Auto Correct.
Press OK.
12
Note
If Remove Red-Eyeappears on the LCD,
press # to attempt to remove red-eye from
your photo.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following:
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
95
Chapter 12
Enhance Skin-Tone
12
Enhance Scenery
12
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
color in your photos and adjusts the image.
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press
(Photo Capture).
Press
(Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Skin-Tone.
Press OK.
d Press a or b to choose
Enhance Scenery.
Press OK.
Note
Note
You can also adjust the effect level
manually, by pressing a or b.
You can also adjust the effect level
manually, by pressing a or b.
e Press OK and a or b to increase or
decrease the number of copies.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following:
f Do one of the following:
„ Press OK and change the print
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
„ If you do not want to change any
settings, press Color Start to print.
96
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
f Do one of the following:
Remove Red-Eye
12
„ Press OK and change the print
The machine detects eyes in your photos and
will attempt to remove red-eye from your
photo.
„ If you do not want to change any
settings, press Color Start to print.
Note
There are some cases when red-eye may
not be removed.
Monochrome
12
You can convert your photo to black & white.
• When the face is too small in the
image.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
• When the face is turning too far up,
down, left or right.
Press
(Photo Capture).
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
b Press a or b to choose
Enhance Photos.
Press OK.
Press
(Photo Capture).
c Press d or c to choose your photo.
Press OK.
b Press a or b to choose
Enhance Photos.
Press OK.
d Press a or b to choose Monochrome.
Press OK.
c Press d or c to choose your photo.
Press OK.
e Press OK and a or b to increase or
decrease the number of copies.
d Press a or b to choose
Remove Red-Eye.
Press OK.
f Do one of the following:
„ Press OK and change the print
„ When Remove Red-Eyeis
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
„ If you do not want to change any
settings, press Color Start to print.
12
„ When Remove Red-Eyeis
unsuccessful,
Unable to Detect.is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eyeonce
again.
e Press OK and a or b to increase or
decrease the number of copies.
97
Chapter 12
Sepia
12
Search by Date
12
You can convert the color of your photo to
sepia.
You can find your photos based on date.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press
(Photo Capture).
Press
(Photo Capture).
b Press a or b to choose
Search by Date.
Press OK.
b Press a or b to choose
Enhance Photos.
Press OK.
c Press a or b to choose the date that you
want to search from.
c Press d or c to choose your photo.
Press OK.
Press OK.
d Press a or b to choose Sepia.
Press OK.
d Press d or c to choose your photo.
Note
e Enter the number of copies you want
using the dial pad.
You can view photos with other dates by
pressing d or c continuously. Press d to
view an older photo and c to view a more
recent photo.
f Do one of the following:
„ Press OK and change the print
e Press a or b to increase or decrease the
„ If you do not want to change any
settings, press Color Start to print.
number of copies.
have chosen all your photos.
g After you have chosen all your photos,
do one of the following:
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
98
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
Print All Photos
12
Slide Show
12
You can print all the photos on your memory
card or USB Flash memory drive.
You can view all your photos on the LCD
using Slide Show. You can also choose a
photo during the operation.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press
(Photo Capture).
Press
(Photo Capture).
b Press a or b to choose
Print All Photos.
Press OK.
b Press a or b to choose Slide Show.
Press OK.
c Enter the number of copies you want
c Press Stop/Exit to finish Slide Show.
using the dial pad.
Printing a photo during a Slide Show
12
d Do one of the following:
a Press OK to stop at one image while
„ Change the print settings. (See
Slide Show is operating.
„ If you do not want to change any
settings, press Color Start to print.
b Press a or b to increase or decrease the
number of copies.
c Do one of the following:
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
12
99
Chapter 12
Trimming
12
DPOF printing
12
You can trim your photo and print a part of the
image.
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
Note
If your photo is very small or an irregular
shape you may not be able to trim the
photo. The LCD will show
Image Too Small.or
Image Too Long.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
When a memory card (CompactFlash®,
Memory Stick™, Memory Stick PRO™, SD,
SDHC or xD-Picture Card™) containing
DPOF information is put into your machine,
you can print the chosen image easily.
Press
(Photo Capture).
b Press a or b to choose Trimming.
Press OK.
a Make sure you have put the memory
c Press d or c to choose your photo.
Press OK.
card in the proper slot.
Press
(Photo Capture). The
d Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
machine will ask you if you want to use
DPOF setting.
b Press 1 to choose Yes.
c Do one of the following:
„ Press l or # to enlarge or reduce the
frame size.
„ Press each arrow key to move the
„ Change the print settings. (See
position of the frame.
„ Press 0 to rotate the frame.
„ If you do not want to change any
settings, press Color Start to print.
„ Press OK when you have finished
adjusting the frame setting.
Note
e Press a or b to increase or decrease the
An Invalid DPOF File error can occur if the
print order that was created on the camera
has been corrupted. Delete and recreate
the print order using your camera to
correct this problem. For instructions on
how to delete or recreate the print order,
refer to your camera manufacturer's
support web site or accompanying
documentation.
number of copies.
f Do one of the following:
„ Press OK and change the print
„ If you do not want to change any
settings, press Color Start to print.
100
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
PhotoCapture Center® print settings
12
You can change the print settings temporarily for the next printing.
These settings are temporary, and the machine returns to its default settings 3 minutes after
Note
You can save the print settings you use most often by setting them as the default. (See Setting
0001
Print Seettinng
Print Quality
Paper Type
Paperr Size
Printt Size
1
Photo
Other GGlossy
4"x6"
Max. Size
Brighttness
0
Print Press Start
PHOTO
1
No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
12
101
Chapter 12
Print Quality
12
Paper options
12
a Press a or b to choose
Print Quality.
Paper Type
12
a Press a or b to choose Paper Type.
b Press d or c to choose Normalor
Photo.
b Press d or c to choose the paper type
you are using, Plain Paper,
Inkjet Paper, Brother BP71or
Other Glossy.
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
Paper and print size
12
a Press a or b to choose Paper Size.
b Press d or c to choose the paper size
you are using, 4"x 6", 5"x 7",
Letteror A4.
Press OK.
c If you chose Letteror A4, press d or c
to choose the Print Size.
Press OK.
Example: Printed Position for Letter paper
1
2
3
3"x 4"
3.5"x 5"
4"x 6"
4
5
6
Max. Size
5"x 7"
6"x 8"
d If you do not want to change additional
settings, press Color Start to print.
102
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
c Press a or b to choose
White Balance, Sharpnessor
Color Density.
Adjusting Brightness,
Contrast and Color
12
d Press d or c to adjust the degree of the
Brightness
12
setting.
Press OK.
a Press a or b to choose Brightness.
e Do one of the following:
b Press d to make a darker copy or press
c to make a lighter print.
Press OK.
„ If you want to customize another
color enhancement, press a or b to
choose another option.
c If you do not want to change additional
settings, press Color Start to print.
„ If you want to change other settings,
press a or b to choose Exit, and
then press OK.
Contrast
12
f If you do not want to change additional
settings, press Color Start to print.
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
Note
• White Balance
a Press a or b to choose Contrast.
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
b Press c to increase the contrast or press
d to decrease the contrast.
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life®)
12
• Sharpness
You can turn on the color enhancement
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
(True2Life®) feature to print more vivid
images. Printing time will be slower.
12
a Press a or b to choose True2Life.
Press OK.
• Color Density
b Do one of the following:
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.
„ If you want to customize the
White Balance, Sharpnessor
Color Density, press d or c to
„ If you do not want to customize,
press d or c to choose Off.
103
Chapter 12
Cropping
12
Borderless printing
12
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
The factory setting is On. If you want to print
the whole image, turn this setting to Off. If
you are also using the Borderless setting,
a Press a or b to choose Borderless.
b Press d or c to choose Off(or On).
Press OK.
c If you do not want to change additional
settings, press Color Start to print.
a Press a or b to choose Cropping.
b Press d or c to choose Off(or On).
Press OK.
Print Date
12
c If you do not want to change additional
settings, press Color Start to print.
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
Cropping: On
12
a Press a or b to choose Print Date.
b Press d or c to choose On(or Off).
Press OK.
Cropping: Off
12
c If you do not want to change additional
settings, press Color Start to print.
Note
The DPOF setting on your camera must
be turned off to use the Print Date
feature.
104
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
Setting your changes as the
new default
Scan to a memory card
or USB Flash memory
drive
12
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
12
Entering Scan mode
12
a Press a or b to choose your new setting.
Press OK.
When you want to scan to a memory card or
USB Flash memory drive, press
Repeat this step for each setting you
want to change.
(Scan).
The LCD shows:
b After changing the last setting, press
a or b to choose Set New Default.
Press OK.
Scan to E-mail
Scan a document
Scan to Image
directly to a media
Scan to OCR
card or USB
Scan to File
flash
Scan to Media
c Press 1 to choose Yes.
d Press Stop/Exit.
memory.
SCAN
Select & Press
OK
Press a or b to choose Scan to Media.
Press OK.
Restoring all settings to the
factory settings
12
If you are not connected to your computer
only the Scan to Media selection will appear
on the LCD.
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
(See Using the Scan key in the Software
User’s Guide on the CD-ROM for details
about the other menu options.)
a Press a or b to choose
Factory Reset.
Press OK.
b Press 1 to choose Yes.
c Press Stop/Exit.
12
105
Chapter 12
e Do one of the following:
How to scan to a memory card
or USB Flash memory drive
„ To change the quality, press a or b to
choose Quality.
12
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 150 dpiand
the default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
07010905.PDF. You can change the color
and quality.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
f Press d or c to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
g Do one of the following:
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
Quality
Selectable File
Format
Color 150 dpi
Color 300 dpi
Color 600 dpi
JPEG/ PDF
JPEG/ PDF
JPEG/ PDF
h Press a or b to choose File Type.
Press d or c to choose JPEG, PDFor
TIFF.
Press OK.
B/W 200x100 dpi TIFF/ PDF
B/W 200 dpi TIFF/ PDF
Note
• If you chose color in the resolution setting,
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
you cannot choose TIFF.
• If you chose black & white in the resolution
setting, you cannot choose JPEG.
IMPORTANT
i Do one of the following:
DO NOT take out the memory card or
USB Flash memory drive while
„ To change the file name, go to
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
„ Press Black Start or Color Start to
start scanning without changing
additional settings.
b Load your document.
j The file name is set automatically
however, you can set a name of your
choice using the dial pad.
c Press
(Scan).
Press a or b to choose File Name.
Enter the new name. (See Entering Text
You can only change the first 6 digits.
Press OK.
d Press a or b to choose
Scan to Media.
Press OK.
106
PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
c Press
(Scan).
Note
Press Clear/Back to delete the current
name.
d Press a or b to choose
Scan to Media.
Press OK.
k Press Black Start or Color Start.
e Press a or b to choose Auto Crop.
Auto Crop
12
f Press d or c to choose On.
Press OK.
You can scan multiple documents placed on
the scanner glass. An individual document
can be previewed on the LCD before you
save it. When you choose Auto Crop, the
machine will scan each document and create
separate files. For example, if you place three
documents on the scanner glass, the
g If you do not want to change additional
settings, press Black Start or
Color Start to start scanning.
h The number of the scanned documents
appears on the LCD.
machine will scan and create three separate
files. If you want to create a three page file,
choose PDFor TIFFfor File Type.
Press OK.
i Press d or c to preview each document
data.
1
j Press OK to save the data.
Note
• This setting is only available for paper that
is rectangular or square.
1
1
3
• If your document is too long or wide, this
setting does not work properly.
2
3
• You must place the documents away from
the edges of the scanner glass as shown
in the illustration.
• You must place the documents at least
0.4 in. (10 mm) apart from each other.
12
2
• Auto Cropadjusts the skew of the
document on the scanner glass, but if your
document is skewed more than
1
2
0.4 in. (10 mm) or greater (top, left, right)
0.8 in. (20 mm) or greater (bottom)
10 degrees, this setting will not work.
Note
• The ADF must be empty to use the Auto
Crop.
Auto Cropis supported by technology
from Reallusion, Inc.
• The Auto Cropfeature is available for up
to a maximum of 16 documents
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
depending on size of your documents.
b Load your document.
107
Chapter 12
Understanding the
Error Messages
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
12
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
Once you are familiar with the types of errors
that can occur while you are using
PhotoCapture Center®, you can easily
identify and troubleshoot any problems.
„ Hub is Unusable.
How to set a new default
12
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
You can save the Scan to Media settings
(Quality, File Typeand Auto Crop)
you use most often by setting them as the
default settings. These settings will stay until
you change them again.
„ Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
a Press
(Scan).
b Press a or b to choose
Scan to Media.
Press OK.
„ No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
c Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
„ Out of Memory
d Press Stop/Exit.
This message will appear if you are
working with images that are too large for
the machine's memory. This message will
also appear when a memory card or USB
Flash memory drive you are using does
not have enough available space for the
scanned document.
How to reset to the factory
settings
12
You can restore all the settings you have
changed to the factory settings.
„ Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
a Press
(Scan).
b Press a or b to choose
Scan to Media.
Press OK.
„ Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface. For more information, visit
message will also appear if you connect a
broken device to the USB direct interface.
c Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d Press Stop/Exit.
108
Printing photos from a camera
13
13
Setting your digital camera
13
Printing photos
directly from a
PictBridge camera
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera.
13
Depending on your camera some of these
settings may not be available.
Camera Menu Options
Selections
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Paper Size
Paper Type
Layout
Letter, A4, 4" × 6",
Printer Settings
(Default setting) 2
Plain Paper, Glossy Paper,
Inkjet Paper, Printer Settings
(Default setting) 2
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge.
Borderless: On,
Borderless: Off,
Printer Settings
(Default setting) 2
PictBridge requirements
13
DPOF setting 1
Print Quality
-
To avoid errors, remember the following
points:
Normal, Fine,
Printer Settings
(Default setting) 2
„ The machine and the digital camera must
be connected using a suitable USB cable.
Color
On, Off,
Enhancement
Printer Settings
(Default setting) 2
„ The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
Print Date
On, Off,
Printer Settings
(Default setting) 2
„ PhotoCapture Center® operations are not
available when using the PictBridge
feature.
13
1
2
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the following settings.
109
Chapter 13
Printing Images
13
Settings
Options
4" × 6"
Paper Size
Paper Type
Layout
Note
Glossy Paper
Borderless: On
Fine
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
Print Quality
Color Enhancement
Print Date
Off
a Make sure that your camera is turned
Off
off. Connect your camera to the USB
„ When your camera does not have any
menu selections, these settings are also
used.
direct interface (1) on the machine using
the USB cable.
„ The names and availability of each setting
depends on the specification of your
camera.
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
1
1
USB direct interface
b Turn on the camera.
When the machine has recognized the
camera, the LCD shows
Camera Connected.
c Choose the photo you want to print
following the instructions from your
camera.
When the machine starts printing a
photo, the LCD will show Printing.
IMPORTANT
To prevent damage to your machine, do
not connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
110
Printing photos from a camera
DPOF printing
13
Printing photos
directly from a digital
camera
(without PictBridge)
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
13
If your camera is using the USB Mass
Storage standard, you can connect your
camera in storage mode. This enables you to
print photos from your camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
(If you would like to print photos in PictBridge
mode, see Printing photos directly from a
Note
Note
An Invalid DPOF File error can occur if the
print order that was created on the camera
has been corrupted. Delete and recreate
the print order using your camera to
correct this problem. For instructions on
how to delete or recreate the print order,
refer to your camera manufacturer's
support web site or accompanying
documentation.
The name, availability and operation differ
among digital cameras. Please refer to the
documentation supplied with your camera
for detailed information, such as how to
switch from PictBridge mode to USB mass
storage mode.
13
111
Chapter 13
Printing Images
13
Understanding the
Error Messages
13
Note
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
Once you are familiar with the types of errors
that can occur while you are printing from a
camera, you can easily identify and
troubleshoot any problems.
a Make sure that your camera is turned
„ Out of Memory
off. Connect your camera to the USB
This message will appear if you are
working with images that are too large for
the machine's memory.
direct interface (1) on the machine using
the USB cable.
„ Unusable Device
This message will appear if you connect a
camera that is not using the USB Mass
Storage standard. This message will also
appear if you connect a broken device to
the USB direct interface.
(For more detailed solutions see Error and
1
1
USB direct interface
b Turn on the camera.
IMPORTANT
To prevent damage to your machine, do
not connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
112
Software and Network features
14
14
The CD-ROM includes the Software User’s
Guide and Network User’s Guide for features
available when connected to a computer (for
example, printing and scanning). These guides
have easy to use links that, when clicked, will
take you directly to a particular section.
c Click the heading you would like to view
from the list at the left of the window.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (Windows®)
„ ControlCenter2 (Macintosh)
„ Remote Setup
„ Faxing from your computer
„ PhotoCapture Center®
„ Network Printing
Macintosh
„ Network Scanning
„ Wired and Wireless Network
How to read HTML User’s Guide
a Make sure your Macintosh is turned on.
Insert the Brother CD-ROM into your
CD-ROM drive.
This is a quick reference for using the HTML
User’s Guide.
b Double-click the Documentation icon.
Windows®
c Double-click your language folder, and
then double-click the top.html.
Note
d Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) in the top
menu, and then click the heading you
would like to read from the list at the left
of the window.
If you have not installed the software, see
a From the Start menu, point to Brother,
MFC-XXXX (where XXXX is your model
number) from the programs group, then
click User’s Guides in HTML format.
b Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) from the
Top Menu.
114
Safety and Legal
A
A
Choosing a location
A
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put
the machine near a telephone wall jack and a standard AC power outlet. Choose a location where
the temperature remains between 50 °F and 95 °F (10 °C and 35 °C).
WARNING
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment,
chemicals or water.
DO NOT connect your machine to AC power outlets on the same circuit as large appliances or
other equipment that might disrupt the power supply.
CAUTION
• Avoid placing your machine in a high-traffic area.
• Avoid placing your machine on a carpet.
• DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.
• DO NOT connect your machine to AC power outlets controlled by wall switches or automatic
timers.
• Disruption of power can wipe out information in the machine's memory.
• Avoid interference sources, such as speakers or the base units of non-Brother cordless
telephones.
• DO NOT tip the machine, or place it on any tilted surface. Doing this may cause ink spillage
and internal damage to your machine.
116
Safety and Legal
To use the machine safely
A
Please keep these instructions for later reference and read them before attempting any
maintenance.
WARNING
There are high voltage electrodes inside the machine. Before you clean the inside of the
machine, make sure you have unplugged the telephone line cord first and then the power cord
from the AC power outlet. Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
DO NOT pull on the middle of the AC power cord. Doing this might cause an electrical shock.
DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a fire
or electrical shock.
A
Unplug this product from the wall outlet before cleaning the inside of the machine.
117
If the machine becomes hot, releases smoke, or generates any strong smells, immediately
unplug the machine from the AC power outlet. Call Brother Customer Service. (See Brother
If metal objects, water or other liquids get inside the machine, immediately unplug the machine
Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged at the wall jack.
Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a
wet location.
This product must be installed near an AC power outlet that is easily accessible. In case of an
emergency, you must unplug the power cord from the AC power outlet to shut off the power
completely.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a
qualified electrician.
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause a fire.
To reduce the risk of shock or fire, use only a No. 26 AWG or larger telecommunication line cord.
118
Safety and Legal
When using your telephone equipment connected to this product, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and injury to people, including
the following:
• DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink
or washing machine, in a wet basement or near a swimming pool.
• Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
• DO NOT use this product to report a gas leak in the vicinity of the leak.
A
119
CAUTION
DO NOT put your hands on the edge of the machine under the document cover or the scanner
cover. Doing this may cause injury.
DO NOT put your hands on the edge of the paper tray under the paper tray cover. Doing this
may cause injury.
120
Safety and Legal
DO NOT touch the area shaded in the illustration. Doing this may cause injury.
When moving the machine you must lift it from the base, by placing a hand at each side of the
unit as shown in the illustration. DO NOT carry the machine by holding the scanner cover or the
Jam Clear Cover.
Lightning and power surges can damage this product! We recommend that you use a quality
surge protection device on the AC power line and on the telephone line, or unplug the cords
during a lightning storm.
A
121
Important safety instructions
A
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 DO NOT use this product near water.
5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
6 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heater. This product should never be placed in a built-in installation unless
adequate ventilation is provided.
7 DO NOT allow anything to rest on the power cord. DO NOT place this product where people
can walk on the cord.
8 If an extension cord is used with this product, make sure that the total ampere ratings of the
products plugged into the extension cord do not exceed the extension cord ampere rating.
Also, make sure that the total of all products plugged into the AC power outlet does not exceed
15 amperes (USA only).
9 DO NOT place anything in front of the machine that will block received faxes. DO NOT place
anything in the path of received faxes.
10 Wait until pages have exited the machine before picking them up.
11 Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never
spill liquid of any kind on the product. DO NOT attempt to service this product yourself because
opening or removing covers may expose you to dangerous voltage points and other risks and
may void your warranty. Refer all servicing to a Brother Authorized Service Center. For the
location of your nearest Brother Authorized Service Center, please call the following:
In USA: 1-877-BROTHER (1-877-276-8437)
In Canada: 1-877-BROTHER
12 Unplug this product from the AC power outlet and refer all servicing to Brother Authorized
Service Personnel under the following conditions:
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed,
adjust only those controls that are covered by the operating instructions.
Improper adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
„ If the product has been dropped or the cabinet has been damaged.
„ If the product exhibits a distinct change in performance, indicating a need for service.
122
Safety and Legal
13 To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).
14 To reduce the risk of fire, electric shock and injury to people, note the following:
„ DO NOT use this product near appliances that use water, a swimming pool, or in a wet
basement.
„ DO NOT use the machine during an electrical storm (there is the remote possibility of an
electrical shock) or to report a gas leak in the vicinity of the leak.
„ DO NOT attempt to operate the machine during an electrical storm or gas leak.
15 Caution - To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.
Standard telephone and FCC Notices (These notices are in effect
on models sold and used in the United States only.)
A
When programming emergency numbers or making test calls to emergency numbers:
„ Remain on the line and briefly explain to the dispatcher the reason for the call before hanging
up.
„ Perform these activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the backside of this equipment is a label that contains, among other information, a
product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
You may safely connect this equipment to the telephone line by means of a standard modular jack,
USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX.The digits
represented by ## are the REN without a decimal point (e.g., 06 is a REN of 0.6). For earlier
products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
A
123
The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service.
If trouble is experienced with this equipment, for repair or warranty information, please contact
the telephone network, the telephone company may request that you disconnect the equipment
until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, call your telephone company or a qualified installer.
If you are not able to solve a problem with your machine, call Brother Customer Service. (See
WARNING
For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the result of your
use of this information, including direct, special or consequential damages. There are no
warranties extended or granted by this document.
This machine has been certified to comply with FCC standards, which are applied to the
USA only.
124
Safety and Legal
Federal Communications Commission (FCC) Declaration of
Conformity (USA only)
A
Responsible Brother International Corporation
Party:
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declares, that the product
Product Name: MFC-495CW
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
„ Call the dealer or an experienced radio/TV technician for help.
„ This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
IMPORTANT
Changes or modifications not expressly approved by Brother Industries, Ltd. could void the
user's authority to operate the equipment.
Industry Canada Compliance Statement (Canada only)
A
A
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
125
LAN connection
A
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
®
International ENERGY STAR Qualification Statement
A
The purpose of the International ENERGY STAR® Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets
the ENERGY STAR® specifications for energy efficiency.
126
Safety and Legal
Legal limitations for copying
A
Color reproductions of certain documents are illegal and may result in either criminal or civil
liability. This memorandum is intended to be a guide rather than a complete listing of every
possible prohibition. In case of doubt, we suggest that you check with counsel as to any particular
questionable documents.
The following documents issued by the United States/Canadian Government or any of its
Agencies may not be copied:
„ Money
„ Bonds or other certificates of indebtedness
„ Certificates of Deposit
„ Internal Revenue Stamps (canceled or uncanceled)
„ Selective Service or draft papers
„ Passports
„ United States/Canadian Postage Stamps (canceled or uncanceled)
„ Food Stamps
„ Immigration Papers
„ Checks or drafts drawn by Governmental agencies
„ Identifying badges or insignias
Copyrighted works cannot be copied. Sections of a copyrighted work can be copied for ‘fair use’.
Multiple copies would indicate improper use.
Works of art should be considered the equivalent of copyrighted works.
Licenses and Certificates of Title to motor vehicles may not be copied under certain
state/provincial laws.
A
127
Trademarks
A
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft, Windows, Windows Server and Internet Explore are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, Macintosh and Safari are trademarks of Apple Inc., registered in the United States and
other countries.
Adobe, Flash, Illustrator, PageMaker and Photoshop are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of
Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
Microdrive is a trademark of International Business Machines Corporation.
CompactFlash is a registered trademark of SanDisk Corporation.
Memory Stick is a trademark of Sony Corporation.
xD-Picture Card is a trademark of FUJIFILM Corporation, Toshiba Corporation and Olympus
Optical Co. Ltd.
PictBridge is a trademark.
Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Duo, MagicGate Memory Stick,
Memory Stick Micro and M2 are trademarks of Sony Corporation.
BROADCOM, SecureEasySetup and the SecureEasySetup logo are trademarks or registered
trademarks of Broadcom Corporation in the United States and/or other countries.
AOSS is a trademark of Buffalo Inc.
Wi-Fi, WPA, WPA2, Wi-Fi Protected Access and Wi-Fi Protected Setup are either trademarks or
registered trademarks of Wi-Fi Alliance in the United States and/or other countries.
Intel and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
FaceFilter Studio is a trademark of Reallusion, Inc.
All other trademarks are the property of their respective owners.
128
Troubleshooting and Routine
Maintenance
B
B
B
Troubleshooting
B
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips.
If you are having difficulty with your machine
B
Printing
Difficulty
Suggestions
No printout.
Check the interface cable or wireless connection on both the machine and your
computer. (See the Quick Setup Guide.)
Check that the machine is plugged in and that the On/Off key is on.
One or more ink cartridges have reached the end of their life.
Check to see if the LCD is showing an error message.
Check that the correct printer driver has been installed and chosen.
Make sure that the machine is online. Click Start and then Printers and Faxes.
Right-click and choose Brother MFC-XXXX (where XXXX is your model name),
and make sure that Use Printer Offline is unchecked.
When you choose the Print Odd Pages and Print Even Pages settings, you may
see a print error message on your computer, as the machine pauses during the
printing process. The error message will disappear after the machine re-starts
printing.
129
Printing (continued)
Difficulty
Suggestions
Poor print quality.
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine’s menu matches the type of paper you are using. (See
Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
„ The expiration date written on the cartridge package has passed. (Genuine
Brother Innobella™ ink cartridges stay usable for up to two years if kept in their
original packaging.)
„ The ink cartridge has been in your machine for over six months.
„ The ink cartridge may not have been stored properly before use.
Make sure you are using Genuine Brother Innobella™ Ink.
Try using the recommended types of paper.
The recommended environment for your machine is between 68 °F to 91 °F
(20 °C to 33 °C).
White horizontal lines appear in text Clean the print head. (See Cleaning the print head on page 155.)
or graphics.
Make sure you are using Genuine Brother Innobella™ Ink.
Try using the recommended types of paper.
The machine prints blank pages.
Characters and lines are stacked.
Make sure you are using Genuine Brother Innobella™ Ink.
Printed text or images are skewed. Make sure the paper is loaded properly in the paper tray and the paper side guides
Make sure the Jam Clear Cover is closed properly.
Smudged stain at the top center of
the printed page.
Make sure the paper is not too thick or curled.
Smudged stain at the right or left
corner of the printed page.
Make sure the paper is not curled when you print on the back side of the paper
with the Print Odd Pages and Print Even Pages settings.
Printing appears dirty or ink seems Make sure you are using the recommended types of paper. (See Acceptable
to run.
dry.
Make sure you are using Genuine Brother Innobella™ Ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type in the Basic tab of
the printer driver.
Stains appear on the reverse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink.
Make sure you are using Genuine Brother Innobella™ Ink.
Make sure you are using the paper support flap.
130
Troubleshooting and Routine Maintenance
Printing (continued)
Difficulty
Suggestions
B
The machine prints dense lines on Check Reverse Order in the Basic tab of the printer driver.
the page.
The printouts are wrinkled.
In the printer driver Advanced tab, click Color Settings, and uncheck
Bi-Directional Printing for Windows® or Bi-Directional Printing for Macintosh.
Make sure you are using Genuine Brother Innobella™ Ink.
Check that the paper size setting in the application and in the printer driver are the
same.
Cannot perform ‘page layout’
printing.
Print speed is too slow.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click Color Settings, and make sure you uncheck Color
Enhancement (True2Life®).
Turn the borderless feature off. Borderless printing is slower than normal printing.
(See Printing for Windows® or Printing and Faxing for Macintosh in the Software
User’s Guide on the CD-ROM.)
True2Life® is not working properly. If the image data is not full color in your application (such as 256 color), True2Life®
will not work. Use at least 24 bit color data with the True2Life® feature.
Photo paper does not feed
properly.
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick-up roller.
Machine feeds multiple pages.
There is a paper jam.
Make sure the paper is loaded properly in the paper tray. (See Loading paper and
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Make sure the paper length guide is set to the paper size. Do not extend the paper
tray when you load A5 or smaller size paper. (See Printer jam or paper jam
Printed pages are not stacked
neatly.
Make sure you are using the paper support flap.
Try to reduce the print resolution. (See Printing for Windows® or Printing and
Faxing for Macintosh in the Software User’s Guide on the CD-ROM.)
Machine does not print from
Adobe® Illustrator®.
131
Printing Received Faxes
Difficulty
Suggestions
Condensed print and white streaks You probably had a bad connection, with static or interference on the telephone
across the page or the top and
bottom of sentences are cut off.
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received color fax prints only in
black & white.
Replace the color ink cartridges that have reached the end of their life, and then
ask the other person to send the color fax again.
Left and Right margins are cut off or Turn on Auto Reduction. (See Printing a reduced incoming fax on page 48.)
a single page is printed on two
pages.
Telephone Line or Connections
Difficulty
Suggestions
Dialing does not work.
(No dial tone)
Check that the machine is plugged in and that the On/Off key is on.
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack of the machine.
(Canada only) Change the Tone/Pulse setting. (See the Quick Setup Guide.)
Verify that the telephone line and jack are working by connecting a known working
telephone and telephone line to the jack. Then lift the external telephone’s handset
and listen for a dial tone. If there is no dial tone, ask your telephone company to
check the line and/or jack.
The machine does not answer
when called.
Make sure the machine is in the correct Receiving Mode for your setup.
possible, call your machine to hear it answer. If there is still no answer, check that
the telephone line cord is plugged into the telephone wall jack and the LINE jack
of the machine. If there is no ringing when you call your machine, ask your
telephone company to check the line.
132
Troubleshooting and Routine Maintenance
Receiving Faxes
Difficulty
Suggestions
B
Cannot receive a fax.
Make sure your machine has a dial tone by pressing the Hook key. If you hear
static or interference on your fax line, please contact your local telephone
company.
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack of the machine. If you subscribe to DSL
or VoIP services, please contact your service provider for connection instructions.
Make sure the machine is in the correct Receive Mode. This is determined by the
external devices and telephone subscriber services you have on the same line as
If you have a dedicated fax line and want your Brother machine to automatically
answer all incoming faxes, you should select Fax Onlymode.
If your Brother machine shares a line with an external answering machine, you
should select the External TADmode. In External TADmode, your Brother
machine will automatically receive incoming faxes and voice callers will be able to
leave a message on your answering machine.
If your Brother machine shares the line with a Voice Mail subscriber service,
If your Brother machine is on a line with the Distinctive Ring subscriber service,
If your Brother machine shares a line with other telephones and you want it to
automatically answer all incoming faxes, you should select the Fax/Telmode. In
Fax/Telmode, your Brother machine will automatically receive faxes and
produce a pseudo/double-ring to alert you to answer voice calls.
If you do not want your Brother machine to automatically answer any incoming
faxes, you should select the Manualmode. In Manualmode, you must answer
every incoming call and activate the machine to receive faxes.
Another device or service at your location may be answering the call before your
Brother machine answers. To test this, lower the ring delay setting:
„ If the answer mode is set to Fax Onlyor Fax/Tel, reduce the ring delay to
„ If the answer mode is set to External TAD, reduce the number of rings
programmed on your answering machine to 2.
„ If the answer mode is set to Manual, DO NOT adjust the ring delay setting.
Have someone send you a test fax:
„ If you received the test fax successfully, your machine is operating properly.
Remember to reset your ring delay or answering machine setting back to your
original setting. If receiving problems recur after resetting the ring delay, then
a person, device, or subscriber service is answering the fax call before the
machine has a chance to answer.
„ If you were not able to receive the fax, then another device or subscriber
service may be interfering with your fax reception or there may be a problem
with your fax line.
133
Receiving Faxes (continued)
Difficulty
Suggestions
Cannot receive a fax.
(continued)
If you are using a telephone answering machine (External TADmode) on the
same line as the Brother machine, make sure your answering machine is set up
correctly. (See Connecting an external TAD (telephone answering device)
1
2
3
Plug the telephone line cord directly from the wall telephone jack to your
Brother machine’s LINE jack.
Remove the protective cap from your Brother machine’s EXT jack, and then
plug the telephone line cord from your answering machine into the EXT jack.
Set your answering machine to answer within 4 rings.
If you are having problems receiving faxes or voice messages, set your
answering machine to answer within 2 or 3 rings.
4
Record the outgoing message on your answering machine.
„ Record five seconds of silence at the beginning of your outgoing
message.
„ Limit your speaking to 20 seconds.
„ End your outgoing message with your Fax Receive Code for people
sending manual faxes. For example: “After the beep, leave a message or
press l 5 1 and Start to send a fax.”
5
6
Set your answering machine to answer calls.
Make sure your Brother machine’s Easy Receive feature is turned On. Easy
Receive is a feature that allows you to receive a fax even if you have answered
If you often get transmission errors due to possible interference on the telephone
line, try changing the Compatibility setting to Basic(for VoIP). (See
Sending Faxes
Difficulty
Suggestions
Cannot send a fax.
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack of the machine.
Make sure that the Fax
key is illuminated.
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error.
134
Troubleshooting and Routine Maintenance
Sending Faxes (continued)
Difficulty
Suggestions
B
Transmission Verification Report
says ‘RESULT:NG’.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get ‘RESULT:NG’ on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Memory Receive (see Turning off Memory Receive Operations
check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the menu setting of Compatibility to Basic(for VoIP).
Sent faxes are blank.
Poor fax send quality.
Make sure you are loading the document properly. (See Loading documents
Try changing your resolution to Fineor S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
Vertical black lines when sending.
Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip.
Handling Incoming Calls
Difficulty
Suggestions
The machine ‘Hears’ a voice as a
CNG Tone.
If Easy Receive is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Easy Receive to Off.
Sending a fax call to the machine.
Custom features on a single line.
If you answered on an extension telephone, press your Fax Receive Code (the
factory setting is l 5 1). If you answered on the external telephone (connected to
the EXT jack), press Start to receive the fax. When your machine answers, hang
up.
If you have Call Waiting, Call Waiting/Caller ID, Voice Mail, an alarm system or
other custom feature on a single telephone line with your machine, it may create
a problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error
Correction Mode) feature should help overcome this problem. This condition is
related to the telephone system industry and is common to all devices that send
and receive information on a single, shared line with custom features. If avoiding
a slight interruption is crucial to your business, a separate telephone line with no
custom features is recommended.
135
Copying Difficulties
Difficulty
Suggestions
Cannot make a copy.
Make sure that the Copy
key is illuminated.
Poor copy results when using the
ADF.
Vertical black lines or streaks
appear in copies.
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the scanner. Clean the glass strip and scanner glass and the white bar and
Copies are blank.
Make sure you are loading the document properly. (See Loading documents
Fit to Page does not work properly. Make sure the document is not skewed on the scanner glass.
Reposition the document and try again.
Scanning Difficulties
Difficulty
Suggestions
TWAIN/WIA errors appear when
starting to scan.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
PaperPort® 11SE with OCR, click File, Scan or Get Photo and click Select to
choose the Brother TWAIN/WIA driver.
Poor scanning results when using
the ADF.
OCR does not work.
Try increasing the scanner resolution.
Software Difficulties
Difficulty
Suggestions
Cannot install software or print.
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
‘Device Busy’
Make sure the machine is not showing an error message on the LCD.
Cannot print images from
FaceFilter Studio.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned On, and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
136
Troubleshooting and Routine Maintenance
PhotoCapture Center® Difficulties
B
Difficulty
Suggestions
1
Have you installed the Windows® 2000 update? If not, do the following:
1) Unplug the USB cable.
Removable Disk does not work
properly.
2) Install the Windows® 2000 update using one of the following methods.
„ Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup
Guide.)
„ Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2
Take out the memory card or USB Flash memory drive and put it back in
again.
3
4
If you have tried ‘Eject’ from within Windows®, take out the memory card or
USB Flash memory drive before you continue.
If an error message appears when you try to eject the memory card or USB
Flash memory drive, it means the card is being accessed. Wait a while and
then try again.
5
If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Cannot access Removable Disk
from Desktop icon.
Make sure that you have correctly inserted the memory card or USB Flash
memory drive.
Part of my photo is missing when
printed.
Make sure that Borderless printing and Cropping are turned off. (See Borderless
137
Network Difficulties
Difficulty
Suggestions
Cannot print over the network.
Make sure that your machine is powered on and is online and in Ready mode.
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
(If you are using a wireless connection or are having Network problems, see the
Network User’s Guide on the CD-ROM for more information.)
<Windows® users>
The network scanning feature does
not work.
Firewall settings on your PC may be rejecting the necessary network connection.
Follow the instructions below to configure the Firewall. If you are using a personal
Firewall software, see the User’s Guide for your software or contact the software
manufacturer.
For Windows® XP SP2 and Windows Vista® users, see Firewall settings in the
Software User’s Guide on the CD-ROM.
For Windows® XP SP1 users, please visit the Brother Solutions Center
<Macintosh users>
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model
list in ControlCenter2.
(Windows® users only)
The network PC-Fax Receive
feature does not work.
Firewall settings on your PC may be rejecting the necessary network connection.
Follow the instructions below to configure the Firewall. If you are using a personal
Firewall software, see the User’s Guide for your software or contact the software
manufacturer.
For Windows® XP SP2 and Windows Vista® users, see Firewall settings in the
Software User’s Guide on the CD-ROM.
For Windows® XP SP1 users, please visit the Brother Solutions Center
<Windows® users>
Your computer cannot find your
machine.
Firewall settings on your PC may be rejecting the necessary network connection.
For detail, see the instruction above.
<Macintosh users>
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model
list in ControlCenter2.
138
Troubleshooting and Routine Maintenance
Dial Tone
B
Telephone line interference
B
Setting the dial tone to Detection will shorten
the dial detect pause.
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you adjust the Equalization for compatibility
to reduce the modem speed for fax
operations.
B
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
a Press Menu.
c Press a or b to choose Dial Tone.
b Press a or b to choose
Initial Setup.
Press OK.
d Press d or c to choose Detectionor
No Detection.
Press OK.
c Press a or b to choose
Compatibility.
e Press Stop/Exit.
d Press d or c to choose High, Normalor
Basic(for VoIP).
„ Basic(for VoIP)reduces the
modem speed to 9,600 bps. Unless
interference is a recurring problem
on your telephone line, you may
prefer to use it only when needed.
„ Normalsets the modem speed at
14,400 bps.
„ Highincreases the modem speed to
33,600 bps. (factory setting)
Press OK.
e Press Stop/Exit.
Note
When you change the compatibility to
Basic(for VoIP), the ECM feature is
only available for color fax sending.
139
Error and Maintenance messages
B
As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the problem and shows a message. The most
common error and maintenance messages are shown below.
You can correct most errors and clear routine maintenance messages by yourself. If you need
more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Error Message
Cause
Action
B&W Print Only
One or more of the color ink
Replace the ink cartridge. (See Replacing
of their life.
You can use the machine in black
& white mode for approximately
four weeks depending on the
number of papes you print.
While this message appears on
the LCD, each operation works in
the following way:
„ Printing
If you click Grayscale in the
Advanced tab of the printer
driver you can use the
machine as a black & white
printer.
„ Copying
If the paper type is set to
Plain Paperor
Inkjet Paperyou can
make copies in black & white.
„ Faxing
If the paper type is set to
Plain Paperor
Inkjet Paper, the machine
will receive and print the faxes
in black & white.
If a sending machine has a
color fax, the machine’s
‘handshake’ will ask that the
fax be sent as black & white.
If the paper type is set to
Other Glossyor
Brother BP71, the machine will
stop all print operations. If you
unplug the machine, or take out
the ink cartridge, you cannot use
the machine until you change to a
new ink cartridge.
140
Troubleshooting and Routine Maintenance
Error Message
Cause
Action
Cannot Detect
You installed a new ink cartridge Take out the new ink cartridge and
B
too quickly and the machine did
not detect it.
re-install it slowly until it clicks.
If you are not using Genuine
Brother Innobella™ ink the
machine may not detect the ink
cartridge.
Use a new Genuine Brother Innobella™
Ink Cartridge. If the error is not cleared, call
Brother Customer Service.
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
Cannot Print
The machine will stop all print
operations. While memory is
available, black and white faxes
will be stored in the memory. If a
sending machine has a color fax,
the machine's ‘handshake’ will
ask that the fax be sent as black &
white. If the sending machine has
the ability to convert it, the color
fax will be stored in the memory
as a black & white fax.
Comm.Error
Poor telephone line quality
caused a communication error.
Send the fax again or connect the machine
to another telephone line. If the problem
continues, call the telephone company and
ask them to check your telephone line.
Connection Fail
Cover is Open
You tried to poll a fax machine
that is not in Polled Waiting mode. setup.
Check the other fax machine's polling
The scanner cover is not closed
completely.
Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it
clicks.
Data Remaining
Disconnected
Document Jam
Print data is left in the machine's Press Stop/Exit. The machine will cancel
memory.
the job and clear it from the memory. Try to
print again.
The other person or other
person's fax machine stopped the
call.
Try to send or receive again.
fed properly, or the document
scanned from the ADF was too
long.
DR Mode in Use
Ring mode. You cannot change
the Receive Mode from Manual to
another mode.
High Temperature
The print head is too warm.
Allow the machine to cool down.
141
Error Message
Cause
Action
Hub is Unusable.
A Hub or USB Flash memory
drive with Hub has been
connected to the USB direct
interface.
A Hub or USB Flash memory drive with
Hub are not supported. Unplug the device
from the USB direct interface.
Image Too Long.
The proportions of your photo are Choose a regularly proportioned image.
irregular so effects could not be
added.
Image Too Small.
Ink low
The size of your photo is too small Choose a larger image.
to trim.
One or more of the ink cartridges Order a new ink cartridge. You can
are near the end of their life. If a
continue printing until the LCD shows
to send, machine’s ‘handshake’
will ask that the fax be sent as
black & white. If the sending
machine has the ability to convert
it, the color fax will be printed at
your machine as a black & white
fax.
Low Temperature
Media Error
The print head is too cold.
Allow the machine to warm up.
The memory card is either
corrupted, improperly formatted,
or there is a problem with the
card.
Put the card firmly into the slot again to
make sure it is in the correct position. If the
error remains, check the media drive (slot)
of the machine by putting in another
memory card that you know is working.
Media is Full.
No Caller ID
The memory card or USB Flash
memory drive you are using
already contains 999 files.
Your machine can only save to your
memory card or USB Flash memory drive
if it contains less than 999 files. Try
deleting unused files to free some space
and try again.
There is no incoming call history. If you want to use the Caller ID feature call
ID service from your telephone
company.
No Cartridge
No File
An ink cartridge is not installed
properly.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
The memory card or USB Flash
memory drive in the media drive
does not contain a .JPG file.
Put the correct memory card or USB Flash
memory drive into the slot again.
142
Troubleshooting and Routine Maintenance
Error Message
Cause
Action
No Paper Fed
The Photo Bypass Tray is in
the Photo printing position.
Verify that the Photo Bypass Tray is in the
Normal printing position.
B
The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
„ Refill the paper in the paper tray, and
then press Black Start or Color Start.
„ Remove the paper and load it again
and then press Black Start or
The paper is jammed in the
machine.
Remove the jammed paper by following
the steps in Printer jam or paper jam
The Jam Clear Cover is not
closed properly.
Check the Jam Clear Cover is closed
evenly at both ends. (See Printer jam or
No Response/Busy
Not Registered
Out of Memory
The number you dialed does not Verify the number and try again.
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
Set up the Speed Dial number. (See
The machine's memory is full.
Fax sending or copy operation in
progress
Do one of the following:
„ Press Stop/Exit and wait until the other
operations in progress finish and then
try again.
„ Clear the data in the memory. To gain
extra memory, you can turn off Memory
Receive. (See Turning off Memory
„ Print the faxes that are in the memory.
The memory card or USB Flash
Delete unused files from your memory card
memory drive you are using does or USB Flash memory drive to make some
not have enough free space to
scan the document.
free space and then try again.
Paper Jam
Paper is jammed in the machine. Open the Jam Clear Cover (at the back of
the machine) and pull out the jammed
paper by following the steps in Printer jam
Make sure the paper length guide is set to
the paper size.
Replace Ink
143
Error Message
Cause
Action
Unable to Clean XX The machine has a mechanical
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, see Transferring your faxes or
problem.
Unable to Init. XX
—OR—
Unable to Print XX
A foreign object such as a
paperclip or ripped paper is in the disconnecting the machine so you will not
Unable to Scan XX
(If the LCD shows
error number 46,
see the error message
Unable to Clean 46
Unable to Init. 46
Unable to Print 46
in this table.)
machine.
lose any important messages. Then,
disconnect the machine from the power for
several minutes and reconnect it.
Unable to Clean 46 The ink absorber box or flushing
The ink absorber box or flushing box will
box is full. These components are need to be replaced. Contact Brother
Unable to Init. 46
Unable to Print 46
periodic maintenance items that
may require replacement after a
Customer Service or a Brother Authorized
Service Center to have your machine
performance from your Brother
machine. The need to replace
these items and the time period
before replacement is dependent
on the number of purges and
flushes required to clean the ink
system. These boxes acquire
amounts of ink during the different
purging and flushing operations.
The number of times a machine
purges and flushes for cleaning
varies depending on different
situations. For example,
Other reasons for cleaning are:
1
Machine automatically cleans after
clearing a printer jam.
2
Machine automatically cleans after
sitting idle for more than 45 days
(infrequent use).
frequently powering the machine
on and off will cause numerous
cleaning cycles since the machine
automatically cleans upon power
up. The use of generic inks may
cause frequent cleanings
because generic inks could cause
poor print quality which is
resolved by cleaning. The more
cleaning the machine requires the
faster these boxes will fill up.
Note
Repairs resulting from the use
of non-genuine supplies may
not be covered under the
stated product warranty.
144
Troubleshooting and Routine Maintenance
Error Message
Cause
Action
Unusable Device
A broken device has been
connected to the USB direct
interface.
Unplug the device from the USB direct
interface, then press On/Off to turn the
machine off and then on again.
B
Disconnect device from
front connector & turn
machine off & then on
Unusable Device
A USB device or USB Flash
memory drive that is not
supported has been connected to
the USB direct interface.
Unplug the device from the USB direct
interface.
Please Disconnect
USB Device.
For more information, visit us at
Wrong Paper Size
Paper is not the correct size.
Check that the Paper Size setting matches
the size of paper in the tray. Load the
correct size of paper, and then press
145
Transferring faxes to another fax
machine
Error animation
B
B
Error animations display step-by-step
instructions when paper gets jammed. You
can read the steps at your own pace by
pressing c to see the next step and d to go
backward. If you do not press a key after
1 minute the animation starts running
automatically again.
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Set your
Station ID in the Quick Setup Guide.)
a Press Stop/Exit to interrupt the error
temporarily.
b Press Menu.
Note
c Press a or b to choose Service.
Press OK.
You can press d, c or OK to pause the
auto-animation and go back to step-by-
step mode.
d Press a or b to choose
Data Transfer.
Press OK.
Transferringyourfaxes or Fax
Journal report
B
e Press a or b to choose Fax Transfer.
Press OK.
If the LCD shows:
f Do one of the following:
„ Unable to CleanXX
„ Unable to Init.XX
„ Unable to PrintXX
„ Unable to ScanXX
„ If the LCD shows No Data, there
are no faxes left in the machine's
memory.
Press Stop/Exit.
We recommend transferring your faxes to
another fax machine or to your PC. (See
„ Enter the fax number to which faxes
will be forwarded.
g Press Black Start.
Transferring faxes to your PC
B
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring the Fax Journal
You can transfer the faxes from your
machine's memory to your PC.
a Press Stop/Exit to interrupt the error
temporarily.
b Make sure you have installed MFL-Pro
Suite on your PC, and then turn on PC
FAX Receiving on the PC. (For details
see PC-FAX receiving for Windows® in
the Software User’s Guide on the
CD-ROM.)
146
Troubleshooting and Routine Maintenance
c Make sure you have set PC Fax
Receive on the machine. (See PC Fax
If faxes are in the machine’s memory
when you set up PC Fax Receive, the
LCD will ask if you want to transfer the
faxes to your PC.
Document jam
B
Documents can jam in the ADF unit if they are
not inserted or fed properly, or if they are too
long. Follow the steps below to clear a
document jam.
B
Document is jammed in the top of the
ADF unit
d Do one of the following:
B
„ To transfer all faxes to your PC,
press 1. You will be asked if you want
to also turn on backup print.
a Take out any paper from the ADF that is
not jammed.
„ To exit and leave the faxes in the
memory, press 2.
b Open the ADF cover.
c Pull the jammed document out to the
e Press Stop/Exit.
left.
Transferring the Fax Journal report to
another fax machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Set your
Station ID in the Quick Setup Guide.)
a Press Stop/Exit to interrupt the error
temporarily.
b Press Menu.
c Press a or b to choose Service.
Press OK.
d Close the ADF cover.
e Press Stop/Exit.
d Press a or b to choose
Data Transfer.
Press OK.
IMPORTANT
To avoid future document jams close the
ADF cover properly by pressing it down in
the middle.
e Press a or b to choose
Report Trans.
Press OK.
f Enter the fax number to which the Fax
Journal report will be forwarded.
g Press Black Start.
147
Document is jammed inside the ADF
unit
Printer jam or paper jam
B
B
Take out the jammed paper depending on
where it is jammed in the machine.
a Take out any paper from the ADF that is
not jammed.
a If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
b Lift the document cover.
c Pull the jammed document out to the
left.
b Pull out the jammed paper (1) and press
Stop/Exit.
d Close the document cover.
e Press Stop/Exit.
1
c Reset the machine by lifting the scanner
cover from the front of the machine and
then closing it.
„ If you cannot remove the jammed
paper from the front of the machine,
or the error message still appears on
the LCD after you have removed the
jammed paper, please go to the next
step.
148
Troubleshooting and Routine Maintenance
d Open the Jam Clear Cover (1) at the
back of the machine. Pull the jammed
paper out of the machine.
f Lift the scanner cover (1) from the front
side of the machine until it locks
securely in the open position. Make sure
that jammed paper is not left inside the
machine.
B
1
1
IMPORTANT
Before you unplug the machine from the
power source, you can transfer your faxes
that are stored in the memory to your PC
or another fax machine so you will not lose
any important messages. (See
e Close the Jam Clear Cover.
Make sure the cover is closed properly.
149
g Lift the scanner cover to release the
lock ( ). Gently push the scanner cover
support down ( ) and close the
IMPORTANT
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
scanner cover ( ) using both hands.
1
• If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Hold down Stop/Exit until
the print head moves to the middle. Then
unplug the machine from the power
source, and take out the paper.
3
2
h Push the paper tray firmly back into the
machine.
i While holding the paper tray in place,
pull out the paper support ( ) until it
clicks, and then unfold the paper
support flap ( ).
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
2
1
Make sure you pull out the paper
support until it clicks.
IMPORTANT
DO NOT use the paper support flap for
Legal size paper.
150
Troubleshooting and Routine Maintenance
a Open the ink cartridge cover.
If one or more of the ink cartridges have
reached the end of their life, the LCD
shows B&W Print Onlyor
Cannot Print.
Routine maintenance
B
B
Replacing the ink cartridges
B
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the
4 cartridges. When the machine detects an
ink cartridge is running out of ink, the machine
will tell you with a message on the LCD.
b Press down to unlock the release lever
and take out the ink cartridge for the
color shown on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you to replace
an ink cartridge, there will be a small amount
of ink left in the ink cartridge. It is necessary
to keep some ink in the ink cartridge to
prevent air from drying out and damaging the
print head assembly.
IMPORTANT
Brother strongly recommends that you do
not refill the ink cartridges provided with
your machine. We also strongly
recommend that you continue to use only
Genuine Brother Brand replacement ink
cartridges. Use or attempted use of
potentially incompatible ink and/or
cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or
cartridges. To protect your investment and
obtain premium performance from the
Brother machine, we strongly recommend
the use of Genuine Brother Supplies.
c Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
151
d Turn the green knob on the protective
yellow cap clockwise until it clicks to
release the vacuum seal, then remove
the cap (1).
f Gently push in the ink cartridge until it
clicks, and then close the ink cartridge
cover.
1
g The machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one (for
example, Did You Change
Black).
e Each color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
For each new cartridge you installed,
press 1 (Yes) to automatically reset the
ink dot counter for that color. If the ink
cartridge you installed is not a brand new
one, be sure to press 2 (No).
• If the LCD shows No Cartridge or
Cannot Detect after you install the ink
cartridges, check that the ink cartridges
are installed properly.
CAUTION
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
152
Troubleshooting and Routine Maintenance
Clean the outside of the machine as
follows:
IMPORTANT
B
• DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
B
a Pull the paper tray (1) completely out of
the machine.
1
• DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
b Wipe the outside of the machine with a
• If you mix the colors by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
dry, lint-free soft cloth to remove dust.
• Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out
of the cartridge.
c Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d Wipe the inside and outside of the paper
tray with a dry, lint-free soft cloth to
remove dust.
Cleaning the outside of the
machine
B
IMPORTANT
• Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
• DO NOT use cleaning materials that
contain ammonia.
• DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
e Close the output paper tray cover and
put the output paper tray firmly back in
the machine.
153
Cleaning the scanner
B
Cleaning the machine’s
printer platen
B
a Lift the document cover (1). Clean the
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
CAUTION
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid electrical shock.
1
3
a Lift the scanner cover until it locks
securely in the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a soft, dry lint-free
cloth.
2
b In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
1
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the glass
to see if you can feel anything on it. If you
feel dirt or debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
154
Troubleshooting and Routine Maintenance
Cleaning the paper pick-up
rollers
Cleaning the print head
B
B
To maintain good print quality, the machine
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
B
a Pull the paper tray completely out of the
machine.
Clean the print head and ink cartridges if you
get a horizontal line in the text or graphics or
blank text on your printed pages. You can
clean Black only, three colors at a time
(Cyan/Yellow/Magenta), or all four colors at
once.
b Unplug the machine from the AC power
outlet and open the Jam Clear Cover (1)
at the back of the machine.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
1
c Clean the Paper Pick-up Rollers (1) with
a Press Ink.
isopropyl alcohol on a cotton swab.
b Press a or b to choose Cleaning.
Press OK.
c Press a or b to choose Black, Coloror
All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to the Ready Screen
automatically.
1
Note
If you clean the print head at least five
times and the print has not improved, try
installing a new Genuine Brother Original
Innobella™ ink Brand replacement
cartridge for each problem color. Try
cleaning the print head again up to five
more times. If the print has not improved
call Brother Customer Service. (See
d Close the Jam Clear Cover.
Make sure the cover is closed properly.
e Put the paper tray firmly back in the
machine.
f Re-connect the power cord.
155
i After cleaning is finished, press
Color Start.
Checking the print quality
B
The machine starts printing the Print
Quality Check Sheet again and then
If faded or streaked colors and text appear on
your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
j Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
color.
a Press Ink.
b Press a or b to choose Test Print.
Press OK.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call Brother Customer Service. (See
c Press a or b to choose
Print Quality.
Press OK.
d Press Color Start.
The machine begins printing the Print
Quality Check Sheet.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
e Check the quality of the four color blocks
on the sheet.
f The LCD asks you if the print quality is
OK.
Do one of the following:
„ If all lines are clear and visible, press
1 (Yes) to finish the Print Quality
Note
„ If you can see missing short lines as
shown below, press 2 to choose No.
i
OK
Poor
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
g The LCD asks you if the print quality is
OK for black and three colors.
Press 1 (Yes) or 2 (No).
h The LCD asks you if you want to start
cleaning.
Press 1 (Yes).
The machine starts cleaning the print
head.
156
Troubleshooting and Routine Maintenance
Checking the print alignment
B
Checking the ink volume
B
You may need to adjust the print alignment
after transporting the machine, or if your
printed text becomes blurred or images
become faded.
Although an ink volume icon appears on the
LCD, you can use the Ink key to see a large
graph showing the ink that is left in each
cartridge.
B
a Press Ink.
a Press Ink.
b Press a or b to choose Test Print.
Press OK.
b Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c Press a or b to choose Alignment.
Press OK.
c Press Stop/Exit.
d Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
Note
You can check the ink volume from your
computer. (See Printing for Windows® or
Printing and Faxing for Macintosh in the
Software User’s Guide on the CD-ROM.)
e Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
f Do one of the following:
„ If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
„ If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
g For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
h For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
i Press Stop/Exit.
157
3 All Settings
Machine Information
B
You can reset all the machine settings
back to the settings that were set at the
factory.
Checking the serial number
B
Brother strongly recommends you use this
operation when you dispose of the
machine.
You can see the machine’s serial number on
the LCD.
a Press Menu.
Note
b
Press
Press OK.
a
or
b
to choose Machine Info.
Unplug the interface cable before you
choose Network or All Settings.
c Press a or b to choose Serial No.
Press OK.
How to reset the machine
B
d Press Stop/Exit.
a Press Menu.
Reset functions
B
b Press a or b to choose
Initial Setup.
Press OK.
The following reset functions are available:
1 Network
c Press a or b to choose Reset.
Press OK.
You can reset the print server back to its
default factory settings such as the
password and IP address information.
d Press a or b to choose the type of reset
you want to use.
2 Speed Dial&Fax
Press OK.
Press 1 to confirm.
Speed Dial & Fax resets the following
settings:
e Press 1 to reboot the machine.
„ Speed Dial
(Speed-Dial and Setup Groups)
„ Programmed fax jobs in the memory
(Polled Transmit, Delayed Fax and
Delayed Batch Transmission)
„ Station ID
(Name and Number)
„ Remote Fax Options
(Fax Forwarding and Paging)
„ Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
„ History
(Caller ID history and Outgoing Call)
„ Faxes in memory
158
Troubleshooting and Routine Maintenance
Packing and shipping
the machine
IMPORTANT
• Make sure that the plastic tabs on both
sides of the green protective part (1) have
securely clicked into place (2).
B
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit may not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
‘park’ the print head after a print job. Listen
carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
1
2
• If you are not able to find the green
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either
the green protective part or the ink
cartridges in position. Shipping without
them will cause damage to your machine
and may void your warranty.
a Open the ink cartridge cover.
b Press the ink release lever to release
the ink cartridge and take out the ink
cartridges. (See Replacing the ink
d Lift the machine from the front and hook
the tab of the green protective part into
the keyed opening (1) on the bottom of
the paper tray. Then latch the protective
part over the raised portion of the paper
tray (2).
c Install the green protective part and then
close the ink cartridge cover.
2
1
159
e Unplug the machine from the telephone
wall jack and take the telephone line
cord out of the machine.
i Wrap the machine in the bag.
f Unplug the machine from the AC power
outlet.
g Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
h Lift the scanner cover ( ) to release the
lock. Gently push the scanner cover
support down ( ) and close the
scanner cover ( ) using both hands.
1
3
2
160
Troubleshooting and Routine Maintenance
j Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below. Do not pack the used ink
cartridges in the carton.
B
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your ‘Exchange’ machine.
k Close the carton and tape it shut.
161
Menu and Features
C
C
On-screen
programming
Mode and menu keys
C
C
Access the main menu.
Your machine is designed to be easy to
operate with LCD on-screen programming
using the menu keys. User-friendly
programming helps you take full advantage of
all the menu selections your machine has to
offer.
Access each mode and its menu
of temporary settings.
Since your programming is done on the LCD,
we have created step-by-step on-screen
instructions to help you program your
machine. All you need to do is follow the
instructions as they guide you through the
menu selections and programming options.
a
b
d
Scroll through the current menu
level.
Go back to the previous menu
level.
Menu table
C
c
Go to the next menu level.
„ Go to the next menu level.
„ Accept an option.
You can program your machine by using the
pages list the menu selections and options.
„ Cancel the current operation.
„ Go back to the previous menu
Memory storage
C
level.
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the PhotoCapture, Fax and Copy
mode key menus if you have chosen
Set New Default. You may have to reset
the date and time.
Exit the menu or stop the current
operation.
162
Menu and Features
Menu table
C
The menu table will help you understand the menu selections and options that are found in the
machine's programs. The factory settings are shown in Bold with an asterisk.
Menu (
)
C
Level1
Level2
Level3
Options
Off
Descriptions
Page
General Setup Mode Timer
—
Sets the time to return to
Fax mode.
0Sec
30Secs
1Min
2Mins*
5Mins
Paper Type
Paper Size
Volume
—
—
Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Letter*
Legal
Sets the type of paper in
the paper tray.
in the paper tray.
A4
A5
4"X6"
Off
Ring
Adjusts the ring volume.
Low
Med*
High
Off
Beeper
Speaker
—
Adjusts the volume level
of the beeper.
Low*
Med
High
Off
Adjusts the volume level
of the speaker.
Low
Med*
High
On
Auto Daylight
if you want the machine to
change automatically for
Daylight Saving Time.
Off*
The factory settings are shown in Bold with an asterisk.
163
Level1
Level2
Level3
Options
Descriptions
Page
General Setup LCD Settings
LCD Contrast Light
LCD.
(Continued)
Med*
Dark
Backlight
Dim Timer
Light*
Med
You can adjust the
brightness of the LCD
backlight.
Dark
Off
LCD backlight stays on
after the last key press.
10Secs
20Secs
30Secs*
1*
Wallpaper
You can choose the
wallpaper of the LCD.
2
3
4
Sleep Mode
—
1Min
2Mins
3Mins
5Mins*
10Mins
30Mins
60Mins
0
the machine must be idle
before it goes into sleep
mode.
Fax
Setup Receive Ring Delay
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
1
2
3
4*
F/T Ring Time 20Secs*
Sets the pseudo/double-
ring time in Fax/Tel mode.
30Secs
40Secs
70Secs
Easy Receive On*
Off
Receives fax messages
without pressing Start.
Remote Codes On*
(l51, #51)
Allows you to answer all
calls at an extension or
external telephone and
use codes to turn the
Off
machine on or off. You can
personalize these codes.
Auto Reduction On*
Reduces the size of
incoming faxes.
Off
The factory settings are shown in Bold with an asterisk.
164
Menu and Features
Level1
Fax
Level2
Setup Receive Memory Receive Off*
(Continued) Fax Forward
Level3
Options
Descriptions
Page
You can set the machine
to either forward fax
messages, call your
(Continued)
Paging
pager, store incoming
faxes in the memory (so
you can retrieve them
Fax Storage
C
PC Fax Receive while you are away from
your machine), or send
faxes to your PC.
If you choose FaxForward
or PC Fax Receive, you
can turn on the safety
feature Backup Print.
Report Setting Transmission On
On+Image
Initial setup for
Transmission Verification
Report and Fax Journal
Report.
Off*
Off+Image
Journal Period Off
Every 50 Faxes
*
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 Days
Print Fax
—
—
—
—
Prints incoming faxes
stored in the memory.
Remote Access
Remaining Jobs
---
—
Set your own code for
Remote Retrieval.
Check which jobs are in
the memory and lets you
cancel chosen jobs.
Miscellaneous TX Lock
Distinctive
—
Prohibits most functions
except receiving faxes.
Off*
Uses the Telephone
company's Distinctive
Ring subscriber service to
register the ring pattern
with the machine.
Set(On)
Caller ID
Area Code
View or print a list of the
last 30 Caller IDs stored in
the memory.
(USA only)
Set up your 3-digit area
code only if you do not dial
it within your own area
code.
The factory settings are shown in Bold with an asterisk.
165
Network menu
Level1
Level2
Level3
Level4
Options
Auto*
Descriptions
Network
Wired LAN
TCP/IP
BOOT Method
Chooses the
BOOT method
that best suits
your needs.
Static
RARP
BOOTP
DHCP
IP Address
Subnet Mask
Gateway
[000-255].
Enter the IP
address.
[000-255].
[000-255].
[000-255]
[000-255].
Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255].
[000-255].
[000-255].
[000-255]
Enter the
Gateway
address.
Node Name
BRNXXXXXXXXXXXX Enter the Node
name.
WINS Config
Auto*
Chooses the
WINS
configuration
mode.
Static
WINS Server
DNS Server
APIPA
(Primary)
000.000.000.000 address of the
Specifies the IP
primary or
(Secondary)
secondary
000.000.000.000
server.
(Primary)
000.000.000.000 address of the
Specifies the IP
primary or
(Secondary)
secondary
000.000.000.000
server.
On*
Automatically
allocates the IP
address from the
link-local address
range.
Off
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
166
Menu and Features
Level1
Level2
Level3
Level4
Options
Auto*
Descriptions
Network
(Continued)
Wired LAN
(Continued)
Ethernet
—
Chooses the
Ethernet link
mode.
100B-FD
100B-HD
10B-FD
C
10B-HD
MAC Address
TCP/IP
—
—
You can see your
machine’s MAC
address from the
control panel.
WLAN
BOOT Method
Auto*
Chooses the
BOOT method
that best suits
your needs.
Static
RARP
BOOTP
DHCP
IP Address
Subnet Mask
Gateway
[000-255].
[000-255].
[000-255].
[000-255]
[000-255].
[000-255].
[000-255].
[000-255]
[000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
Enter the Subnet
mask.
Enter the
Gateway
address.
Node Name
BRWXXXXXXXXXXXX Enter the Node
name.
WINS Config
Auto*
Chooses the
WINS
configuration
mode.
Static
WINS Server
DNS Server
(Primary)
000.000.000.000 address of the
Specifies the IP
primary or
(Secondary)
secondary
000.000.000.000
server.
(Primary)
Specifies the IP
000.000.000.000 address of the
primary or
(Secondary)
secondary
000.000.000.000
server.
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
167
Level1
Level2
Level3
Level4
Options
On*
Descriptions
Network
(Continued)
WLAN
TCP/IP
APIPA
Automatically
allocates the IP
address from the
link-local address
range.
(Continued)
(Continued)
Off
Setup Wizard
SES/WPS/AOSS
—
—
—
—
You can
configure your
print server.
You can easily
configure your
wireless network
settingsusing the
one-button push
method.
WPS w/PIN Code
WLAN Status
—
—
You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
Status
Signal
—
—
You can see the
current wireless
network status.
You can see the
current wireless
network signal
strength.
SSID
—
—
You can see the
current SSID.
Comm. Mode
You can see the
current
Communication
Mode.
MAC Address
—
—
You can see your
machine’s MAC
address from the
control panel.
Network I/F
—
—
Wired LAN*
—
—
You can choose
the network
connection type.
WLAN
Network Reset
—
—
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
168
Menu and Features
Menu (
) (continued)
Level1
Level2
Level3
—
Options
Descriptions
Page
Print Reports Transmission
Help List
—
—
Prints these lists and
reports.
—
C
Quick Dial
—
Alphabetical
Order
Numerical
Order
Fax Journal
User Settings
—
—
—
—
—
—
—
—
—
—
Network Config
Caller ID hist.
Machine Info. Serial No.
Lets you check the serial
number of your machine.
Initial Setup Receive Mode
—
Fax Only*
Fax/Tel
External TAD
Manual
that best suits your needs.
Date&Time
Station ID
Tone/Pulse
—
—
—
Puts the date and time on See
the LCD and in headings
of faxes you send.
Quick
Setup
Guide.
Fax:
Set your name and fax
number to appear on each
page you fax.
Name:
—
—
—
Tone*
Choose the dialing mode.
(Canada only)
Pulse
Dial Tone
Detection
You can shorten the dial
tone detect pause.
No Detection*
High*
Compatibility
to help resolve
transmission problems.
Normal
Basic(for VoIP)
The factory settings are shown in Bold with an asterisk.
169
Level1
Level2
Level3
Options
Descriptions
Page
Initial Setup Reset
Network
—
Resets the print server
back to its factory default
settings, such as the
password and IP address
information.
(Continued)
Speed Dial&Fax
—
Deletes all stored
Speed Dial numbers and
restores the Station ID,
Quick Dial List,
Transmission Verification
Report and Fax Journal
back to the factory default
settings.
All Settings
—
Resets all the machine’s
settings back to the
settings that were set at
the factory.
Local Language
—
—
English*
Allows you to change the See
LCD language for your
country.
Quick
Setup
(USA only)
Spanish
Guide.
Local Language
English*
Allows you to change the
LCD language for your
country.
(Canada only)
French
The factory settings are shown in Bold with an asterisk.
170
Menu and Features
Fax (
)
Level1
Level2
Level3
Options
Standard*
Fine
Descriptions
Page
Fax Resolution
—
—
Sets the resolution for
outgoing faxes.
C
S.Fine
Photo
Contrast
—
—
—
Auto*
Changes the lightness or
darkness of faxes you send.
Light
Dark
Speed Dial
Search
Alphabetical
Order
a few keys (and Start).
Numerical
Order
Set Speed Dial
Setup Groups
—
—
You can store Speed Dial
numbers, so you can dial by
pressing only a few keys
(and Start).
—
—
—
—
Broadcasting.
Outgoing Call Send a fax
You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to Speed Dial,
or delete it.
Add to Speed
Dial
Delete
Caller ID hist. Send a fax
—
—
—
—
You can choose a number
from the Caller ID history and
then send a fax to it, add it to
Speed Dial, or delete it.
Add to Speed
Dial
Delete
Broadcasting
Add Number
Speed Dial
You can send the same fax
message to more than one
fax number.
Complete
Delayed Fax
Batch TX
—
—
—
On(00:00)
Off*
Sets the time of day in
24-hour format that the
delayed faxes will be sent.
—
On
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
Off*
Real Time TX
Polled TX
—
—
—
—
On
You can send a fax without
using the memory.
Off*
On
Sets up your machine with
an document to be retrieved
by another fax machine.
Off*
The factory settings are shown in Bold with an asterisk.
171
Level1
Level2
Level3
Options
On
Descriptions
Page
Polling RX
—
—
another fax machine.
Off*
On
Overseas Mode
Glass ScanSize
—
—
—
—
If you are having difficulty
sending faxes overseas, set
this to On.
Off*
Letter*
Adjust the scan area of the
scanner glass to the size of
the document.
A4
Set New Default
Factory Reset
—
—
—
—
—
—
You can save your fax
settings.
You can restore all settings
to the factory settings.
The factory settings are shown in Bold with an asterisk.
172
Menu and Features
Scan (
)
Level1
Option1
Option2
Option3
Descriptions
Page
Scan to E-mail
Scan to Image
Scan to OCR
Scan to File
—
—
—
You can scan a black & white See
or a color document into your Software
C
E-mail application.
User's
Guide
on the
CD-ROM.
—
—
—
—
—
—
—
—
—
—
You can scan a color picture
into your graphics
application.
You can have your text
document converted to an
editable text file.
You can scan a black & white
or a color document into your
computer.
Scan to Media Quality
(when a memory
card or USB
Color 150 dpi
*
You can choose the scan
resolution, file format and
enter a file name for your
Color 300 dpi
Flash memory
drive is inserted)
Color 600 dpi document.
B/W 200x100 dpi
B/W 200 dpi
File Type
—
(If you chose
color option in
Quality setting)
PDF*
JPEG
(If you chose
B&W option in
Quality setting)
PDF*
TIFF
—
File Name
Auto Crop
—
—
On
Scan multiple documents
placed on the scanner glass
to a memory card or USB
Flash memory drive at a time.
Off*
Set New Default
—
—
—
—
You can save your scan
settings as the default
settings.
Factory Reset
the original factory default
settings.
The factory settings are shown in Bold with an asterisk.
173
Copy (
)
Level1
Level2
Level3
Options
Descriptions
Page
Quality
—
—
Fast
for the next copy.
Normal*
Best
Enlarge/Reduce 100%*
Enlarge
—
—
—
—
104% EXEiLTR
You can choose the
enlargement ratio for the
next copy.
186% 4"x6"
i
LTR
198% 4"x6"iA4
Reduce
—
46% LTRi4"x6" You can choose the
reduction ratio for the next
78% LGLiLTR
copy.
83% LGLiA4
93% A4iLTR
97% LTRiA4
Fit to Page
Custom(25-400%)
—
—
—
—
—
Your machine will adjust
the size automatically to the
paper size you set.
—
You can enter an
enlargement or reduction
ratio.
Paper Type
Paper Size
Brightness
Contrast
Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Letter*
matches the paper in the
tray.
—
—
—
—
—
—
matches the paper in the
tray.
Legal
A4
A5
4"x 6"
Adjusts the brightness of
copies.
Light
+2
+1
-1
-2
Dark
Adjusts the contrast of
copies.
+2
+1
-1
-2
The factory settings are shown in Bold with an asterisk.
174
Menu and Features
Level1
Level2
Level3
Options
On
Descriptions
You can save some ink.
Page
Ink Save Mode
—
—
Off*
Stack*
Sort
—
Stack/Sort
—
—
—
sort multiple copies.
C
Page Layout
Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
You can make N in 1 or
Poster copies.
4 in 1 (L)
Poster(3 x 3)
—
Book Copy
On
—
—
—
—
Corrects dark borders and
skew when copying from
the scanner glass.
On(Preview)
Skew Adjustment
Shadow Revise
—
Off*
Watermark Copy Watermark Copy On
Off*
see the
into your document as a
Watermark.
watermark copy
settings in the
following table.)
Current Setting
—
—
—
—
Exit
—
—
Set New Default
Factory Reset
—
You can save your copy
settings.
—
—
—
to the factory settings.
The factory settings are shown in Bold with an asterisk.
175
Watermark Copy Settings
Option1
Option2
Option3
Option4
Descriptions
Page
Template
—
Text
CONFIDENTIAL* Uses a template to place
text into your document as
a Watermark.
DRAFT
COPY
A
Position
B
C
D
E*
F
G
H
I
Pattern
Small
Size
Medium*
Large
-90°
-45°*
0°
Angle
45°
90°
Transparency -2
-1
0*
+1
+2
Color
Red
Orange
Yellow
Blue
Green
Purple
Black*
—
Apply
The factory settings are shown in Bold with an asterisk.
176
Menu and Features
Option1
Option2
Option3
Option4
Descriptions
Page
Media
(Select image
from media)
Position
A
Places a logo or text into
your document as a
Watermark using an image
from removable media.
B
C
D
C
E*
F
G
H
I
Pattern
Small
Medium*
Size
Large
Angle
-90°
-45°*
0°
45°
90°
Transparency -2
-1
0*
+1
+2
Apply
—
Scan
(Set watermark
document and
press Start.)
Transparency -2
transparency of the
watermark as you scan it
from a paper document.
-1
0*
+1
+2
Apply
—
The factory settings are shown in Bold with an asterisk.
177
Photo Capture (
)
Level1
Level2
Level3
Options
Descriptions
Page
View Photo(s)
—
—
See the print
settings in the
following table.
You can preview your
photos on the LCD.
Print Index
—
Layout Format 6 Images/Line
*
You can print a thumbnail
page.
5 Images/Line
Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Letter*
Paper Type
Paper Size
A4
Print Photos
—
—
—
See the print
settings in the
following table.
image.
Enhance Photos Auto Correct
with these settings.
Enhance Skin-
Tone
Enhance Scenery
Remove Red-Eye
Monochrome
Sepia
Search by Date
Print All Photos
—
—
—
You can search your
photos from date.
—
You can print all photos in
your memory card or USB
Flash memory drive.
Slide Show
Trimming
—
—
—
—
Show of your photos.
You can trim your photo
and print a part of the
image.
The factory settings are shown in Bold with an asterisk.
178
Menu and Features
Print Settings
Option1
Option2
Option3
Option4
Descriptions
Page
Print Quality Normal
—
—
Choose the print quality.
(Does not appear Photo*
when DPOF Print
is chosen.)
C
Paper Type
Plain Paper
—
—
—
Choose the paper type.
Inkjet Paper
Brother BP71
Other Glossy*
4"x 6"*
Paper Size
(When A4 or
Letter is chosen)
size.
5"x 7"
3"x 4"
3.5"x 5"
4"x 6"
5"x 7"
6"x 8"
Max. Size*
—
Letter
A4
Brightness
—
—
Adjusts the brightness.
Light
+2
(Does not appear
when
Enhance Photos
is chosen.)
+1
-1
-2
Dark
Contrast
—
Adjusts the contrast.
+2
+1
(Does not appear
when
Enhance Photos
is chosen.)
-1
-2
The factory settings are shown in Bold with an asterisk.
179
Option1
Option2
Option3
Option4
Descriptions
Page
True2Life
On
White Balance
areas.
+2
+1
(Does not appear Off*
when
Enhance Photos
is chosen.)
-1
-2
Sharpness
Color Density
—
Enhances the detail of the
image.
+2
+1
-1
-2
Adjusts the total amount of
color in the image.
+2
+1
-1
-2
Cropping
On*
—
margin to fit the paper size
or print size. Turn this
feature off if you want to
print whole images or
prevent unwanted
Off
cropping.
Borderless
Print Date
On*
—
—
—
—
to fit the edges of the paper.
Off
On
Prints the date on your
photo.
(Does not appear Off*
when DPOF Print
is chosen.)
Set New Default
—
—
—
—
—
You can save your print
settings.
Factory Reset
—
You can restore all the
settings to factory settings.
The factory settings are shown in Bold with an asterisk.
180
Menu and Features
Speed Dial ( )
Level1
Level2
Level3
Options
Descriptions
Page
Search
—
—
Alphabetical
Order
You can set up dial by
pressing only a few keys
(and Start).
C
Numerical
Order
Set Speed Dial
Setup Groups
—
—
—
—
—
numbers, so you can dial by
pressing only a few keys
(and Start).
—
You can set up a Group
number Broadcasting.
The factory settings are shown in Bold with an asterisk.
Ink (
)
Level1
Level2
Level3
Options
Descriptions
Page
Test Print
—
—
Print Quality Lets you check the print
quality or alignment.
Alignment
Cleaning
—
—
Black
Color
All
Lets you clean the print
head.
Ink Volume
—
—
—
Lets you check the
available ink volume.
The factory settings are shown in Bold with an asterisk.
181
Entering Text
C
When you are setting certain menu selections, such as the Station ID, you may need to enter text
into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0, #
and l do not have printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access
the character you want.
Press
Key
one
time
two
times
three
times
four
times
five
times
2
3
4
5
6
7
8
9
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
A
D
G
J
L
M
P
T
O
R
V
Y
M
7
T
9
W
Inserting spaces
C
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c twice between characters.
Making corrections
C
If you entered an incorrect letter and want to change it, press d to move the cursor under the
incorrect character. Then press Clear/Back. Re-enter the correct character. You can also back
up and insert letters.
Repeating letters
C
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor
to the right before you press the key again.
Special characters and symbols
C
Press l, # or 0, repeatedly until you see the special character or symbol you want.
Press l
Press #
Press 0
for
for
for
(space) ! " # $ % & ' ( ) + , - . / m
: ; < = > ? @ [ ] ^ _
English:
French:
Spanish:
Á À Ã Â Ç É È Ê Ë Í Î Ï Ó Õ Ô Ö Ú Ù 0
À Â Ç É È Ê Ë Î Ï Ô Ú Ù 0
Á É Í Ñ Ó Ú 0
182
Specifications
D
D
General
D
Printer Type
Inkjet
Black:
Color:
Print Method
Piezo with 94 × 1 nozzle
Piezo with 94 × 3 nozzles
D
Memory Capacity
40 MB
Wide 3.3 in. (83.8 mm) Color LCD 1
AC 100 to 120 V 50/60 Hz
LCD (liquid crystal display)
Power Source
Power Consumption
Off:
Average 0.5 W
Average 3.5 W
Average 6 W
Average 28 W
Sleep Mode:
Standby:
Operating:
Dimensions
14.8 in.
(375 mm)
7.1 in.
(180 mm)
15.4 in.
(390 mm)
14.6 in.
(370 mm)
16.1 in.
(410 mm)
18.0 in.
(460 mm)
Weight
17.9 lb (8.1 kg)
50 dB or less 2
Noise
Operating:
Operating:
Temperature
50 to 95 °F (10 to 35 °C)
Best Print Quality: 68 to 91 °F (20 to 33 °C)
Humidity
Operating:
20 to 80% (without condensation)
Best Print Quality: 20 to 80% (without condensation)
ADF (automatic document For best results we recommend:
feeder)
Up to 15 pages
Temperature: 68 to 86 °F (20 to 30 °C)
Humidity: 50 to 70%
Paper: 20 lb (80 g/m2) A4 or Letter size
1
2
Measured diagonally.
This depends on printing conditions.
183
Print media
D
Paper Input
Paper Tray
„ Paper Type:
Plain Paper, Inkjet Paper (coated paper),
„ Paper size:
Letter, Legal, Executive, A4, A5, A6, JIS B5, Envelopes
(commercial No.10, DL, C5, Monarch, JE4),
Width: 3 7/8 in. (98 mm) - 8.5 in. (215.9 mm)
Length: 5.8 in. (148 mm) - 14 in. (355.6 mm)
For more details, see Paper weight, thickness and
„ Maximum paper tray capacity:
Approx. 100 sheets of 20 lb (80 g/m2) plain paper
Photo Bypass Tray (USA)
Photo Paper Tray (Canada)
„ Paper type:
Plain Paper, Inkjet Paper (coated paper) and
Glossy Paper 1
„ Paper size:
Photo 4 × 6 in. and Photo L 3.5 × 5 in.
Width: 3.5 in. (89 mm) - 4.0 in. (101.6 mm)
Length: 5.0 in. (127 mm) - 6.0 in. (152.4 mm)
„ Maximum paper tray capacity:
Up to 20 sheets
Up to 50 sheets of 20 lb (80 g/m2) plain paper (face up print
delivery to the output paper tray) 1
Paper Output
1
For glossy photo paper or transparencies, we recommend removing printed pages from the output paper tray
immediately after they exit the machine to avoid smudging.
2
3
Use only transparencies recommended for inkjet printing.
184
Specifications
Fax
D
Compatibility
Coding System
Modem Speed
ITU-T Super Group 3
MH/MR/MMR/JPEG
Automatic Fallback
33,600 bps
D
Document Size
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Length: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Length: Max. 11.7 in. (297 mm)
8.2 in. (208 mm) (Letter)
8.2 in. (208 mm)
Scanning Width
Printing Width
Gray Scale
Levels: 64 (B&W) / 256 (Color)
Standard, Sequential: (Black only)
Automatic/Light/Dark
Polling Types
Contrast Control
(manual setting)
Resolution
„ Horizontal 203 dot/in. (8 dot/mm)
„ Vertical
Standard
98 line/in. (3.85 line/mm) (Black)
196 line/in. (7.7 line/mm) (Color)
Fine
196 line/in. (7.7 line/mm) (Black/Color)
Photo
196 line/in. (7.7 line/mm) (Black)
Superfine
392 line/in. (15.4 line/mm) (Black)
100 stations × 2 numbers
Up to 6
Speed Dial
Groups
Broadcasting 1
Automatic Redial
Ring Delay
250 stations
1 time after 5 minutes
0, 1, 2, 3 or 4 rings
Communication Source Public switched telephone network.
Memory Transmission
Out of Paper Reception
185
1
2
Black & White only
‘Pages’ refers to the ‘Brother Standard Chart No. 1’ (a typical business letter, Standard resolution, MMR code).
Specifications and printed materials are subject to change without prior notice.
3
‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
186
Specifications
Copy
D
Color/Black
Yes/Yes
Document Size
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Length: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Length: Max. 11.7 in. (297 mm)
Copy Width: Max. 8.26 in. (210 mm)
Stacks/Sorts up to 99 pages
25% to 400% (in increments of 1%)
(Black)
D
Multiple Copies
Enlarge/Reduce
Resolution
„ Scans up to 1200 × 1200 dpi
„ Prints up to 1200 × 1200 dpi
(Color)
„ Scans up to 600 × 1200 dpi
„ Prints up to 600 × 1200 dpi
Yes
Ink Save Mode
187
PhotoCapture Center®
D
Compatible Media 1
CompactFlash® (4 MB - 16 GB)
(Type I only)
(Microdrive™ is not compatible)
(Compact I/O cards such as Compact LAN card and Compact
Modem card are not supported.)
Memory Stick™ (16 MB - 128 MB)
Memory Stick PRO™ (256 MB - 16 GB)
(Not available for music data with MagicGate™)
Memory Stick Duo™ with adapter (16 MB - 128 MB)
Memory Stick Micro™ (M2™) with adapter
SD 2
SDHC 3
microSD with adapter
miniSD with adapter
xD-Picture Card™ 4
USB Flash memory drive 5
Resolution
Up to 1200 × 2400 dpi
File Extension
(Media Format)
DPOF (ver. 1.0, ver. 1.1), Exif DCF (up to ver. 2.1)
Photo Print: JPEG 6
(Image Format)
Scan to Media: JPEG, PDF (Color)
TIFF, PDF (Black)
True2Life®
Color Enhancement
Photo Enhance
Auto Correct, Enhance Skin-Tone, Enhance Scenery, Trimming,
Slide Show, Remove Red-Eye, Monochrome and Sepia
Number of Files
Up to 999 files
(The folder inside memory cards or USB Flash memory drive is
also counted.)
Folder
File must be stored in the 4th folder level of the memory card or
USB Flash memory drive.
Borderless
1
Memory cards, adapters and USB Flash memory drive are not included.
2
3
4
16 MB to 2 GB
4 GB to 16 GB
xD-Picture Card™ Conventional Card from 16 MB to 512 MB
xD-Picture Card™ Type M from 256 MB to 2 GB
xD-Picture Card™ Type M+ 1 GB and 2 GB
xD-Picture Card™ Type H from 256 MB to 2 GB
5
USB 2.0 Standard
USB Mass Storage standard from 16 MB to 32 GB
Support format: FAT12/FAT16/FAT32
6
7
Progressive JPEG format is not supported.
188
Scanner
D
Color/Black
Yes/Yes
Yes (Windows® 2000 Professional/Windows® XP/
TWAIN Compliant
Windows® XP Professional x64 Edition/Windows Vista®)
Mac OS X 10.3.9 - 10.4.x - 10.5.x 1
36 bit color Processing (Input)
WIA Compliant
Color Depth
24 bit color Processing (Output)
(Actual Input: 30 bit color/Actual Output: 24 bit color)
Up to 1200 × 2400 dpi (optical) (Scanner Glass)
Up to 1200 × 600 dpi (optical) (ADF)
ADF Width: 5.8 in. to 8.5 in. (148 mm to 215.9 mm)
ADF Length: 5.8 in. to 14 in. (148 mm to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Length: Max. 11.7 in. (297 mm)
Up to 8.26 in. (210 mm)
Resolution
Document Size
Scanning Width
Gray Scale
256 levels
Auto Crop
Yes
1
For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com.
2
Windows® XP in this User’s Guide includes Windows® XP Home Edition, Windows® XP Professional, and Windows®
XP Professional x64 Edition.
3
Maximum 1200 × 1200 dpi scanning when using the WIA Driver for Windows® XP and Windows Vista® (resolution up
to 19200 × 19200 dpi can be selected by using the Brother scanner utility).
190
Specifications
Printer
D
Windows® 2000 Professional/Windows® XP/
Printer Driver
Windows® XP Professional x64 Edition/
Native Compression mode
D
Up to 1200 × 6000 dpi
1200 × 2400 dpi
Resolution
1200 × 1200 dpi
600 × 1200 dpi
600 × 600 dpi
600 × 300 dpi
600 × 150 dpi (Color)
450 × 150 dpi (Black & White)
Printing Width
Borderless
Letter, A4, A6, Photo 4" × 6", Index Card 5" × 8",
Photo L 3.5" × 5", Photo 2L 5" × 7",
Ink Save Mode
Yes
1
Print only via network.
2
For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com.
When the Borderless feature is set to On.
3
4
191
Interfaces
D
USB 1 2
Use a USB 2.0 interface cable that is no longer than 6 feet (2 m).
Use an Ethernet UTP cable category 5 or greater.
LAN 3
Wireless LAN
Your machine supports IEEE 802.11b/g wireless communication
with your wireless LAN using Infrastructure mode or a wireless
Peer-to-Peer connection in Ad-hoc Mode.
1
Your machine has a USB 2.0 Hi-speed interface. The machine can also be connected to a computer that has a USB
1.1 interface.
2
3
Third party USB ports are not supported.
192
Specifications
Computer requirements
D
SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS
Hard Disk Space to install
Computer Platform &
Operating System
Version
Supported
PCSoftware
Functions
Processor
Minimum
Speed
PC
Interface
Minimum Recommended
For
For
Applications
RAM
RAM
Drivers
®
®
®
Printing,
USB,
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g
64 MB 256 MB 110 MB 340 MB
Windows
Windows® 2000
Professional 5
Intel Pentium II
D
Operating
or equivalent
Scanning,
Removable
System
®
XP Home 2 5
128 MB
110 MB 340 MB
Windows
Windows® XP
Professional 2 5
Disk
®
®
256 MB 512 MB 110 MB 340 MB
512 MB 1 GB 600 MB 530 MB
Windows XP
64-bit (Intel 64 or
Professional x64
AMD64) supported
CPU
Edition
®
®
Windows
Vista® 2
Intel Pentium 4
or equivalent
®
64-bit (Intel 64 or
AMD64) supported CPU
®
®
®
Printing
10/100
256 MB 512 MB 50 MB
N/A
Windows Server
Intel Pentium III
or equivalent
Base-TX
(Ethernet),
Wireless
802.11b/g
2003 (print only via
network)
®
®
Windows Server
64-bit (Intel 64 or
AMD64) supported CPU
2003 x64 Edition
(print only via network)
®
®
®
512 MB 2 GB
Windows Server
Intel Pentium 4or
equivalent 64-bit
2008(printonlyvia
network)
®
(Intel 64 or AMD64)
supported CPU
®
USB 3
PowerPC G4/G5
Macintosh Mac OS X
Operating 10.3.9 - 10.4.3
System
Printing,
PC Fax
128 MB 256 MB 80 MB 400 MB
10/100
PowerPC® G3
350MHz
Send ,
Base-TX
(Ethernet),
Wireless
802.11b/g
Scanning,
Removable
®
Mac OS X
10.4.4 - 10.5.x
512 MB 1 GB
PowerPC G4/G5
Disk
®
Intel Core
™
Processor
Conditions:
1
Microsoft® Internet Explorer® 5.5 or greater.
For WIA, 1200 1200 resolution. Brother Scanner
Utility enables to enhance up to 19200 19200 dpi.
For the latest driver updates, visit us at
2
(in USA)
×
×
(in Canada)
3
4
5
Third party USB ports are not supported.
PC Fax supports black and white only.
All trademarks, brand and product names are the
property of their respective companies.
PaperPort™ 11SE supports Microsoft® SP4 or higher for
Windows® 2000 and SP2 or higher for XP.
6
®
Removable disk is a function of PhotoCapture Center .
193
Consumable items
D
Ink
The machine uses individual Black, Yellow, Cyan and Magenta ink
cartridges that are separate from the print head assembly.
Service Life of Ink
Cartridge
Starter ink cartridges are in the box. The first time you install the ink
cartridges the machine will use extra ink to fill the ink delivery tubes.
This is a one-time process that enables high quality printing.
Afterward, replacement ink cartridges will print the specified
number of pages. Starter cartridge yield is approx. 65% of the yield
of the LC61 replacement cartridge.
Replacement
Consumables
<Black> LC61BK, <Cyan> LC61C,
<Magenta> LC61M, <Yellow> LC61Y
Black - Approximately 450 pages 1
Cyan, Magenta,Yellow - Approximately 325 pages 1
1
Approx. cartridge yield is declared in accordance with ISO/IEC 24711
For more information about the replacement consumables, visit us
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and
"Bella" (meaning "Beautiful" in Italian) and is a representation of the
"innovative" technology providing you with "beautiful" and "long
lasting" print results.
When you print photo images, Brother recommends Innobella™
glossy photo paper (BP71 series) for high quality. Brilliant prints are
made easier with Innobella™ Ink and paper.
194
Specifications
Network (LAN)
D
LAN
You can connect your machine to a network for Network Printing,
Network Scanning, PC Fax Send, and access photos from
Network Management software.
Windows® 2000 Professional/Windows® XP/
Windows® XP Professional x64 Edition/Windows Vista®/
Support for
D
Mac OS X 10.3.9 - 10.4.x - 10.5.x 4
Ethernet 10/100 BASE-TX Auto Negotiation (Wired LAN)
IEEE 802.11 b/g (Wireless LAN)
Protocols
TCP/IP:
ARP, RARP, BOOTP, DHCP,
APIPA (Auto IP), NetBIOS/WINS,
LPR/LPD, Custom Raw Port/Port9100,
DNS Resolver, mDNS, LLMNR responder,
FTP Server, TELNET, SNMPv1, TFTP,
Scanner Port, LLTD responder,
Web Services (Printing)
Network Security
SSID/ESSID, 128 (104) / 64 (40) bit WEP,
WPA2-PSK (AES), WPA-PSK (TKIP/AES)
Setup Support Utility SecureEasySetup™ Yes (simple setup with your
SecureEasySetup™-capable access
point/router)
AOSS™
WPS
Yes (simple setup with your AOSS™-capable
access point/router)
Yes (simple setup with your Wi-Fi Protected
Setup-capable access point/router)
1
2
See the Computer Requirements chart on page 193.
If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is
3
4
Print only via network.
For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com.
195
Wireless one-push configuration
D
or AOSS™, you can configure the machine easily without a computer. By pushing a button on the
wireless LAN router/access point and the machine, you can set up the wireless network and
security settings. See the user’s guide for your wireless LAN router/access point for instructions
on how to access one-push mode.
1
Push Button Configuration
Note
Access point/routers that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™
have the symbols shown below.
196
Glossary
E
E
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
ADF (automatic document feeder)
CNG tones
The special tones (beeps) sent by fax
The document can be placed in the ADF
and scanned one page at a time
automatically.
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Auto Reduction
E
Coding method
Reduces the size of incoming faxes.
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JPEG, if the
receiving machine has the same
capability.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.This
is a safety feature so you will not lose
messages during a power failure.
Communication error (Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Batch Transmission
(Black & white faxes only) As a cost
saving feature, all delayed faxes to the
same fax number can be sent as one
transmission.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Beeper Volume
Contrast
Volume setting for the beep when you
press a key or make an error.
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Brightness
Changing the Brightness makes the whole
image lighter or darker.
Delayed Fax
Broadcasting
Sends your fax at a specified time later.
The ability to send the same fax message
to more than one location.
Distinctive Ring
A subscriber service purchased from the
telephone company that gives you
another telephone number on an existing
telephone line. The Brother machine uses
the new number to simulate a dedicated
fax line.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
197
Dual Access
Fax/Tel
You can receive faxes and telephone
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax from memory or
receiving or printing an incoming fax.
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Easy Receive
Fine resolution
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Gray Scale
ECM (Error Correction Mode)
The shades of gray available for copying,
scanning and faxing photographs.
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Group number
A combination of Speed Dial numbersthat
are stored in a Speed Dial location for
Broadcasting.
Extension telephone
A telephone using the same line as your
fax but plugged into a separate wall jack.
Help list
External telephone
A printout of the complete Menu table that
you can use to program your machine
when you do not have the User's Guide
with you.
A telephone that is plugged into the EXT
jack of your machine.
F/T Ring Time
Innobella™
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Innobella™ is a range of genuine
consumables offered by Brother. For best
quality results Brother recommends
Innobella™ Ink and Paper.
Fax Forwarding
Journal Period
Sends a fax received into the memory to
another pre-programmed fax number.
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
LCD (liquid crystal display)
Fax Receive Code
The LCD screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Press this code (l 5 1) when you answer
a fax call on an extension or external
telephone.
Fax Storage
Manual fax
You can store received faxes in memory.
You can lift the handset of the external
telephone or you can press Hook to hear
the receiving fax machine answer before
you press Black Start or Color Start to
begin sending.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
198
Glossary
Memory Receive
Pulse (Canada only)
Receives faxes into the machine's
memory when the machine is out of paper.
A form of rotary dialing on a telephone
line.
Menu mode
Quick Dial List
Programming mode for changing your
machine's settings.
A listing of names and numbers stored in
Speed Dial memory, in numerical order.
OCR (optical character recognition)
Real Time Transmission
The bundled ScanSoft® PaperPort® SE
with OCR or Presto! PageManager
software application converts an image of
text to text you can edit.
When memory is full, you can send faxes
in real time.
Remaining jobs
E
You can check which jobs are waiting in
memory and cancel jobs individually.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Remote Access Code
Your own four-digit code (--- ) that allows
you to call and access your machine from
a remote location.
Paging
This feature enables your machine to call
your pager when a fax is received into its
memory. The machine will also page for
voice messages.
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Resolution
Pause
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Allows you to place a 3.5 second delay in
the dialing sequence while you are dialing
using the dial pad or while you are storing
Speed Dial numbers. Press Redial/Pause
as many times as needed for longer pauses.
Ring Delay
The number of rings before the machine
answers in Fax Onlyand Fax/Tel
modes.
PhotoCapture Center®
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
Ring Volume
Volume setting for the machine's ring.
Scanning
Photo resolution (B&W only)
The process of sending an electronic
image of a paper document into your
computer.
A resolution setting that uses varying
shades of gray for the best representation
of photographs.
Scan to Media
PictBridge
You can scan a black & white or color
document into a memory card or USB
Flash memory drive. Black & whiteimages
can be in TIFF or PDF file format and color
images can be in PDF or JPEG file format.
Allows you to print photos directly from
your digital camera at high resolution for
photo quality printing.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Search
An electronic, numerical or alphabetical
listing of stored Speed Dial and Group
numbers.
199
Speed Dial
A pre-programmed number for easy
dialing. You must press (Speed Dial),
User Settings
A printed report that shows the current
settings of the machine.
the two digit code, and Black Start or
Color Start to start the dialing process.
Standard resolution
203 × 97 dpi. It is used for regular size text
and quickest transmission.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.
Super Fine resolution (B&W)
392 × 203 dpi. Best for very small print
and line art.
TAD (telephone answering device)
You can connect an external device or
answering machine to the EXT. jack of
your machine.
Telephone Answer Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (# 5 1).
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialing on the telephone line
used for Touch Tone telephones.
Transmission
The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.
Transmission Verification Report
A listing for the last fax sent, that shows its
date, time and number.
True2Life®
Adjusts the color in the image for better
print quality by improving sharpness,
white balance and color density.
200
Index
F
Connecting
A
external TAD
external telephone ................................ 62
two-line external TAD or telephone ...... 61
Consumable items ................................. 194
Control panel overview .............................. 6
ControlCenter
Access codes, storing and dialing ............71
Apple Macintosh
See Software User's Guide on the
CD-ROM.
See Software User's Guide on the
CD-ROM.
Copy
Automatic
enlarge/reduce ..................................... 79
enter Copy mode .................................. 78
page layout (N in 1) .............................. 80
return to factory settings ....................... 86
using a media card ............................ 85
using a paper document .................... 86
using a template ................................ 85
using a USB Flash memory drive ...... 85
Custom Ringing ....................................... 54
Custom telephone features on a single
Easy Receive .....................................44
F
B
Broadcasting ............................................34
Brother
accessories and supplies ........................ ii
CreativeCenter ........................................5
C
Setting up your area code .....................57
Canceling
Cleaning
printer platen .......................................154
201
D
F
Dialing
access codes and credit card
Fax codes
Remote Access Code ........................... 50
Fax Forwarding
Fax Storage ............................................. 46
Fax, from PC
Direct printing
Document
See Software User's Guide on the
CD-ROM.
Fax, stand-alone
F/T Ring Time, setting ....................... 43
telephone line interference .............. 139
at end of conversation ....................... 39
Broadcasting ..................................... 34
canceling from memory ..................... 38
delayed batch transmission ............... 38
delayed fax ........................................ 37
from memory (Dual Access) .............. 37
from scanner glass ............................ 32
E
No Cartridge ........................................142
No Paper Fed ......................................143
while scanning a document ................87
Unable to Init. ......................................144
Extension telephone, using ......................63
External telephone, connecting ................62
202
Resolution ..........................................36
set new default ...................................38
L
Fax/Tel mode
answering at extension
M
Macintosh
See Software User's Guide on the
CD-ROM.
Maintenance, routine
Manual
F
G
transmission ......................................... 39
Memory Storage .................................... 162
Mode, entering
H
Help
using Mode and menu keys .............162
I
Ident-A-Ring .............................................54
Ink cartridges
N
Network
Printing
See Network User's Guide on the
CD-ROM.
Scanning
See Software User's Guide on the
CD-ROM.
J
Jacks
Convert to RJ11 jack triplex adapter .....60
EXT
O
External telephone .............................62
Jams
Out of Area (Caller ID) ............................. 57
203
Scan to Media
P
Search by Date ..................................... 98
specifications ...................................... 188
PictBridge
Presto! PageManager
See Help in Presto! PageManager
application.
size of document ...................................21
PaperPort™ 11SE with OCR
See Software User's Guide on the
CD-ROM and Help in the PaperPort™
11SE application to access How-to-Guides.
Personalized Ring ....................................54
Photo Bypass Tray (USA) ........................13
Photo Paper Tray (Canada) .....................13
PhotoCapture Center®
Print
checking alignment ............................. 157
checking quality .................................. 156
specifications ...................................... 191
Printing
CompactFlash® .....................................90
from PC
See Software User's Guide on the
CD-ROM.
Memory Stick PRO™ ............................90
Memory Stick™ .....................................90
Photo Effects
on small paper ...................................... 15
See Software User's Guide on the
CD-ROM.
Auto Correct .......................................95
Enhance Scenery ...............................96
Monochrome ......................................97
Remove Red-Eye ...............................97
Print settings
Q
Quick Dial
Access codes and credit card
Borderless ........................................104
Brightness ........................................103
Paper type & size .............................102
Print Date .........................................104
Return to factory setting ...................105
Printing
Broadcasting ........................................ 34
using Groups ..................................... 34
Group dial
setting up Groups for Broadcasting ... 69
Speed Dial
setting up by 2-digit location .............. 66
204
Speed Dial
R
Receive Mode
Redial/Pause ............................................65
Reducing
T
TAD (telephone answering device),
incoming faxes ......................................48
Remote Setup
receive mode ........................................ 40
recording OGM ..................................... 59
Telephone line
F
See Software User's Guide on the
connections .......................................... 59
difficulties ........................................... 132
interference ........................................ 139
two-line telephone system .................... 60
Transferring your faxes or
Troubleshooting ..................................... 129
checking ink volume ........................... 157
document jam ..................................... 147
if you are having difficulty
incoming calls .................................. 135
PhotoCapture Center® .................... 137
Two-line telephone system ...................... 60
TX Lock
CD-ROM.
Caller ID History Report ........................73
Journal Period ....................................72
Resolution
Ring Delay, setting ...................................43
S
Scannable area ........................................23
Scanning
See Software User's Guide on the
CD-ROM.
Serial Number
SimpleBiz Fax & Alternative Number
205
V
Volume, setting
W
Notice-Disclaimer ................................... iii
Windows®
See Software User's Guide on the
CD-ROM.
Wireless Network
See Quick Setup Guide and Network
User's Guide on the CD-ROM.
206
EQUIPMENT ATTACHMENT LIMITATIONS
(Canada only)
NOTICE
This product meets the applicable Industry Canada technical specifications.
NOTICE
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five.
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, Canada H9B 3H6
Visit us on the World Wide Web
These machines are made for use in the USA and Canada only. We cannot recommend using
them overseas because it may violate the Telecommunications Regulations of that country and
the power requirements of your multi-function center may not be compatible with the power
available in foreign countries. Using USA or Canada models overseas is at your own risk and
may void your warranty.
|
AB Soft XS 25000 User Manual
Brother Printer MFC7360N User Manual
Canon S450 User Manual
Dakota Digital SIM 1 GSXR User Manual
Friedrich Air Conditioner XQ08 User Manual
Friedrich Air Conditioner ZQ10 A10B User Manual
Friedrich SH20L30 User Manual
Friedrich WALLMASTER WY12 User Manual
HoMedics BKP 300 2 User Manual
Honeywell HZ 817 User Manual