iBT25
Bluetooth Wireless
Stereo Speaker System
with USB Charging
instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
iBT25
Introduction
Thank you for purchasing the iHome iBT25. This product is designed to provide high quality wireless
sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic
operation and care of the unit. Please read them carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
iBT25
FCC ID: EMOIBT25
IC: 986B-IBT25
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference received, including interference that may cause undesired operation
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
•
•
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Download from Www.SoQmaDnuIaDls.:cBom0. A2ll0M4an1ua5ls Search And Download.
iBT25
Table of Contents
Included/ Meet Your iBT25............................................................................................. 1-2
Setting Up the Unit/ Turning the Unit ON and OFF.................................................................3
Using Bluetooth: Pairing Your Device....................................................................................4
Playing Audio Via Bluetooth................................................................................................5
Playing Audio Via Aux line-in..............................................................................................6
Charging Via USB Port/ Switching Grille Covers ...................................................................7
Consumer Product Safety Guide....................................................................................... 8-9
Troubleshooting..............................................................................................................10
Warranty......................................................................................................................11
Download from Www.Somanuals.com. All Manuals Search And Download.
iBT25
Included
• iBT25 Speaker
• Extra removable grille
• Stereo 3.5 mm audio cable
• 100V-240V universal AC adaptor
iBT25 Speaker
power adaptor
audio
cable
Extra removable grille
Download from Www.Somanuals.com. All Manuals Search And Download.
1
iBT25
Meet Your iBT25
Top
Power Button
Volume Down Button
Volume Up Button
Front Power/Pairing
Indicator (located
behind speaker grille)
Back
USB Charging Port
DC Jack
Pairing Button
12V 2A
aux-in
pairing
USB charge
Back Bluetooth Indicator
Aux-in Jack
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Using the
iBT25
Setting Up the Unit
1.Connect the included AC adaptor to the DC
jack located on the back of the unit and
connect the other end to a working wall outlet.
outlet
Turning the Unit ON and OFF
1.Once the AC adaptor is properly connected,
press and hold the Power Button located on
top of the unit to turn the unit ON. The blue
power indicator on the front of the unit will light
and ascending tones will sound. Press the
Power Button again to enter standby, which
uses less power, but still allows normal
operation. The blue power indicator will pulse
slowly in standby mode. Note that if no audio
is detected within 3 minutes when power is on,
the unit automatically reverts to standby mode,
indicated by two tones.
12V 2A
2. Press and hold the Power Button for 2 seconds
to turn the unit OFF. Descending tones will
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Using the
iBT25
Using Bluetooth: Pairing Your Device
NOTE: See the iBT25 Bluetooth Connection Guide for complete pairing details.
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
2. Press and hold the Pairing Button (located on the back of the unit) for 2 seconds. The unit will turn on
and enter pairing mode, tones will sound and the lights will flash blue while the unit attempts to pair.
“iHome iBT25” should appear on your device’s menu. If “Not Paired, “Not Connected” or similar
message appears, tap on “iHome iBT25” to begin/complete pairing. If your device asks for a
password, enter 1234 on the keyboard of your device. If no device is paired within 2 minutes, the
unit will revert to its previous state. To retry pairing, follow steps 1 & 2.
3. Once paired with a device, the blue indicator lights will glow steadily and a confirmation tone will
sound. There should be an indication on your device that pairing is complete. On some devices, you
must then select “Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired,
your device should link to the iBT25 whenever within range.
Note: if you interrupt the Bluetooth connection by disconnecting the unit from AC power, the Bluetooth icon
may remain on the device’s menu for up to 20 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the
iBT25
Pairing with a Different Device
When you power ON the speaker, it will automatically link with the previously paired
Bluetooth device as long as that device is still within range (approx. 30 feet). To pair with a
different device, follow steps 1& 2 on page 4.
Playing Audio Via Bluetooth
1. Press and hold the Power Button to turn on the unit. The blue light on front of the unit will glow steadily
and ascending tones will sound and the unit will search for a previously paired device. The back light
will be out and will turn solid blue once a previously paired device is detected. You can then listen to
audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
2. Use the controls on your Bluetooth device to play or pause audio and navigate tracks.
3. Adjust the volume on the unit by pressing the Volume Down Button or Volume Up Button. The front
panel LED blinks 3x when unit is at maximum volume. You can also adjust volume on your device.
4. When done listening, press and hold the Power Button for 2 seconds to turn the unit OFF.
Note: Audio playing through the unit via the Aux line-in jack will be interrupted whenever Bluetooth
audio is detected.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the
iBT25
Playing Audio via Aux In
1. Connect one end of the included 3.5mm stereo audio cable to the Aux line-in jack on the back of the
unit and connect the other end to the headphone or line-out jack on your audio device.
2. Press and hold the Power Button on the unit to turn it on.
3. Power on the audio device and use the controls on the device to play or pause audio, and navigate
tracks.
4. Adjust the volume on the unit by pressing the Volume Down Button or Volume Up Button. You can also
adjust volume on your device.
5. When done listening, press and hold the Power Button for 2 seconds to turn the unit OFF. Remember
to turn off your audio device, too.
mobile phone
PSP
iPod
MP3/MP4
PC
Laptop
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Using the
iBT25
Charging Devices via USB Port
1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and
connect the other end to the charging port on your device.
2. Monitor the charging on your device. Some devices use a proprietary charging method and will not
charge using the USB Port. If this happens, you must charge your device using the charger that came
NOTE: To avoid charging noise,
do not connect a device to the USB
charging port while the device
is connected to the Aux-in jack.
Switching Grille Covers
1. Gently pry the current grille away from the unit and set aside in a safe place
2. Carefully line up the other grille with the holes and press gently into place.
Download from Www.Somanuals.com7. All Manuals Search And Download.
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or
other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is always best to have a clear area
from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the
antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C.the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month
or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the
user’s operating instructions. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
or call 1-800-288-2792 Toll Free
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in
workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty
period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect
or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service. The product must
include proof of purchase, including date of purchase. An out-of-warranty fee for service will be charged for units that are
received without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for
damage that occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty
period. Also include your name and address information, a brief description for why the unit is being returned, and the return
authorization number. No unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the
Factory Service Center address authorized by SDI Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players,
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits,
actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is
contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI
product.
© 2013 SDI Technologies, Inc. All rights reserved
or call 1-800-288-2792 Toll Free
iBT25-03182013-B
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|