Hotpoint Dishwasher FDYF 11011 Style User Manual

Instructions for use  
DISHWASHER  
Contents  
GB  
Product Fiche, 2  
English, 1  
Precautions and safety advice, 3-4  
General safety  
Disposal of old electrical appliances  
Saving energy and respecting the environment  
Recycling & Disposal Information  
Installation, 5-6-7  
Positioning and levelling  
Connecting the electricity and water supplies  
Technical data  
Advice regarding the first wash cycle  
Description of the appliance, 8  
Overall view  
Control panel  
Loading the racks, 9-10  
Lower rack  
FDYF 11011 STYLE  
Upper rack  
Adjusting the upper rack  
Unsuitable crockery  
Damage to glass and crockery  
Start-up and use, 11  
Starting the dishwasher  
Measuring out the detergent  
Wash cycles, 12  
Table of wash cycles  
Special wash cycles and options, 13  
Rinse aid and refined salt, 14  
Measuring out the rinse aid  
Setting water hardness  
Measuring out the refined salt  
Care and maintenance, 15  
Cutting off the water and electricity supplies  
Cleaning the dishwasher  
Preventing unpleasant odours  
Cleaning the sprayer arms  
Cleaning the water inlet filter  
Cleaning the filters  
Leaving the machine unused for extended periods  
Troubleshooting, 16  
After-Sales Service, 17  
Guarantee, 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions and safety advice  
• The packaging material should not be used as a toy:  
The appliance was designed and manufactured in  
compliance with current international safety standards.  
The following information has been provided for safety  
reasons and should therefore be read carefully.  
GB  
it can become a choking or suffocation hazard.  
If your family includes children:  
• DO NOT allow children to play with the appliance or  
tamper with its controls.  
• Keep detergents and rinse aids away from children.  
• Keep children away from the open door of a  
dishwasher, there could still be some detergent left  
inside.  
Keep this instruction manual in a safe place for future  
reference. If the appliance is sold, given away or  
moved, please ensure the manual is kept with the  
machine, so that the new owner may benefit from the  
advice contained within it.  
Please read this instruction manual carefully: it contains  
important information regarding the safe installation, use  
and maintenance of the appliance.  
Disposal of old electrical appliances  
The European Directive 2012/19/EU on Waste  
Electrical and Electronic Equipment (WEEE), requires  
that old household electrical appliances must not be  
disposed of in the normal unsorted municipal waste  
stream. Old appliances must be collected separately  
in order to optimise the recovery and recycling of  
the materials they contain and reduce the impact on  
human health and the environment. The crossed out  
“wheeled bin” symbol on the product reminds you of  
your obligation, that when you dispose of the appliance  
it must be separately collected.  
This appliance is intended to be used in household  
and similar applications such as:  
- staff kitchen areas in shops, offices and other working  
environments;  
- farm houses;  
- by clients in hotels, motels and other residential type  
environments;  
- bed and breakfast type environments.  
General safety  
Consumers should contact their local authority or  
retailer for information concerning the correct disposal  
of their old appliance.  
• This appliance is not intended for use by persons  
(including children) with reduced physical, sensory  
or mental capabilities, or lack of experience and  
knowledge, unless they have been given supervision  
or instruction concerning use of the appliance by a  
person responsible for their safety.  
Saving energy and respecting the  
environment  
• Children should be supervised to ensure that they  
do not play with the appliance.  
• The appliance was designed for domestic use inside  
the home and is not intended for commercial or  
industrial use.  
• The appliance must be used by adults only, to wash  
domestic crockery according to the instructions in  
this manual.  
Saving water and energy  
• Only start a wash cycle when the dishwasher is full.  
While waiting for the dishwasher to be filled, prevent  
unpleasant odours with the Soak cycle (see Wash  
Cycles).  
• Select a wash cycle that is suited to the type of  
crockery and to the soil level of the crockery using  
the Wash cycle table:  
• The appliance must not be installed outdoors, even  
in covered areas. It is extremely dangerous to leave  
the machine exposed to rain and storms.  
• Do not touch the appliance when barefoot.  
• When unplugging the appliance always pull the plug  
from the mains socket, do not pull on the cable.  
• The water supply tap must be shut off and the  
plug should be removed from the electrical socket  
before cleaning the appliance or carrying out any  
maintenance work.  
• If the appliance breaks down, do not under any  
circumstances touch the internal parts in an attempt  
to carry out the repair work yourself.  
• Do not lean or sit on the open door of the appliance:  
this may cause the appliance to overturn.  
• The door should not be left open as it may create a  
dangerous obstacle.  
- for dishes with a normal soil level, use the Eco  
wash cycle, which guarantees low energy and water  
consumption levels.  
- if the load is smaller than usual activate the Half  
load* option (see Start-up and use).  
• If your electricity supply contract gives details of  
electricity saving time bands, run wash cycles  
during the periods when a lower tariff is applied.  
The Delayed start* button (see Start-up and use)  
helps you organise the wash cycles accordingly.  
Phosphate-free and chlorine-free detergents  
containing enzymes  
• We strongly recommend that you use detergents  
that do not contain phosphates or chlorine, as  
these products are harmful to the environment.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Enzymes provide a particularly effective action  
at temperatures around 50°C, and as a result  
detergents containing enzymes can be used in  
conjunction with low-temperature wash cycles in  
order to achieve the same results as a normal 65°C  
wash cycle.  
GB  
• To avoid wasting detergent, use the product in  
appropriate quantities based on the manufacturer’s  
recommendations, the hardness of the water and the  
soil level and quantity of the crockery. Even if they  
are biodegradable, detergents contain substances  
that may alter the balance of nature.  
Recycling & Disposal Information  
As part of Hotpoint’s continued commitment  
to helping the environment, Hotpoint reserves the right  
to use quality recycled components to keep down  
customer costs and minimise material wastage.  
Please dispose of packaging and old appliances  
carefully.  
To minimise risk of injury to children, remove the door,  
plug and cut mains cable off flush with the appliance.  
Dispose of these parts separately to ensure that the  
appliance can no longer be plugged into a mains  
socket and the door cannot be locked shut.  
* Only available in selected models.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
The cable should not be bent or compressed.  
If the appliance must be moved at any time, keep it  
in an upright position; if absolutely necessary, it may be  
tilted onto its back.  
GB  
If the power supply cable is damaged, it must be replaced  
by the manufacturer or its Technical Assistance Service in order  
to prevent all potential hazards. (See After Sales Service)  
Positioning and levelling  
1. Remove the appliance from all packaging and check that it  
has not been damaged during transportation.  
If it has been damaged, contact the retailer and do not proceed  
any further with the installation process.  
This appliance must be earthed.  
Fuses:your appliance comes fitted with a plug and a 13A fuse. If  
you need to replace the fuse, only those rated at 13A and ASTA  
approved to BS1362 should be used. If you lose the fuse cover, a  
replacement may be obtained from your local authorised Service  
Centre or Electrical company. Correct replacement is identified  
by colour coding or the marking on base of plug.  
2. Check the dishwasher by placing it so that its sides or back  
panel are in contact with the adjacent cabinets or even with  
the wall. This appliance can also be recessed under a single  
worktop* (see the Assembly instruction sheet).  
DO NOT use the plug unless the fuse cover is fitted.  
3. Position the dishwasher on a level and sturdy floor. If the  
floor is uneven, the front feet of the appliance may be adjusted  
until it reaches a horizontal position. If the appliance is levelled  
correctly, it will be more stable and much less likely to move or  
cause vibrations and noise while it is operating.  
Changing the Plug  
Cut off and dispose of the supplied plug if it does not fit your  
socket.  
To avoid a shock hazard DO NOT insert the discarded  
plug into a socket anywhere else.  
4*. Adjust the height of the rear foot from the front of the  
appliance on the central lower part of the dishwasher, turning  
a hexagonal spanner (red color) with an opening of 8 mm in a  
clockwise direction to increase the height or in an anticlockwise  
direction to decrease the height.  
Wires in the mains lead are coloured accordance with the  
following code:  
The dishwasher meets the requirements set out by the  
regulations in force concerning safety and electrical equipment.  
Green/Yellow - Earth  
Blue  
-
Neutral  
Brown  
-
Live  
Any technical checks should be conducted exclusively by  
a trained and authorised technician: Repairs carried out by  
unaithorised persons will invalidate the guarantee, as well as  
posing a potential hazard to the user.  
If you change the plug, the colour of the wires in the mains lead  
may not correspond with the terminal markings in the plug, which  
if not coloured, could be:  
The manufacturer declines all responsibility for damage to  
persons or property resulting from failure to observe the above  
precautions, from tampering with even a single component or  
from the use of non-original spare parts.  
EARTH ‘E’ or  
NEUTRAL  
LIVE  
‘N’  
‘L’  
Electrical Connection  
Before inserting the plug into the electrical socket, make sure  
that:  
Changing the Mains Lead  
A lead can be ordered from Hotpoint Service  
UK: 08709 066 066 or  
Republic of Ireland: 1850 302 220  
the socket is earthed and complies with current regulations;  
- If you have damaged the existing lead or require a longer one  
a charge will be made. It is strongly advised that this work is  
carried out by a qualified electrician.  
- If the domestic wiring includes a residual current-operated  
circuit breaker, ensure that it conforms to the latest regulations.  
the socket can withstand the maximum load of the appliance,  
which is indicated on the data plate located on the inside of  
the door (see Description of the appliance);  
the power supply voltage falls within the values indicated on  
the data plate on the inside of the door;  
The dishwasher must not be connected to the electricity supply  
while installation is being carried out.  
the socket is compatible with the plug of the appliance. If this  
is not the case, ask an authorised technician to replace the  
plug (see After Sales Service); do not use extension cables  
or multiple sockets.  
- This appliance should only be connected to a 230/240V AC  
source, via a properly installed earthed socket.  
- Use the dishwasher solely in a domestic environment.  
- DO NOT stand or place heavy objects on the door when it is  
open, this could damage the door or cause the appliance to  
tip forward.  
Once the appliance has been installed, the power supply  
cable and the electrical socket should be easily accessible.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Company shall not be held responsible for any  
incidents that occur if these regulations are not observed.  
If the inlet hose is not long enough, contact a specialist  
store or an authorised technician (see Assistance).  
GB  
The water pressure must be within the values indicated  
in the Technical data table (see Installation).  
Anti-condensation strip*  
After installing the dishwasher, open the door and stick the  
adhesive transparent strip under the wooden shelf in order to  
protect it from any condensation which may form.  
The hose should not be bent or compressed.  
The appliance must be connected to the water supply  
network using new hoses.  
Do not use old hoses.  
Ensure that the new hose supplied is connected and the old  
hose is disposed of safely.  
Technical data  
width 60 cm  
height 85 cm  
depth 60 cm  
Dimensions  
Capacity  
13 standard place-settings  
DO NOT overtighten the hose connector, hand tight is  
sufficient.  
Water supply  
pressure  
0,05 ÷ 1MPa (0.5 ÷ 10 bar)  
7,25 – 145 psi  
Power supply voltage See appliance data plate  
Total absorbed power See appliance data plate  
Ensure the fill hose is not kinked.  
Tap connections*: A range of adaptors are available to  
suit your tap.  
Fuse  
See appliance data plate  
This dishwasher conforms to the  
following European Community  
Directives:  
DO NOT connect the dishwasher to a single outlet  
instantaneous water heater or an electric heater.  
-2006/95/EC (Low Voltage)  
-2004/108/EC (Electromagnetic  
Compatibility)  
-2009/125/EC (Comm. Reg.  
1016/2010) (Ecodesign)  
-97/17/EC (Labelling)  
Sink Waste System  
Connect the outlet hose (without bending it) to a drain duct  
with a minimum diameter of 32 mm.  
-2012/19/EU Waste Electrical  
and Electronic Equipment  
(WEEE)  
Connecting the water supplies  
Connection to the water and electricity supplies should  
only be performed by a qualified technician.  
The dishwasher should not stand on top of the water  
hoses or the electricity supply cable.  
The outlet hose must be at a height ranging from 40 to 80 cm  
(from 15’’ to 31’’) from the floor/surface where the dishwasher  
rests (A).  
Connecting the water inlet hose  
The water inlet and outlet hoses and the electricity supply  
cable may be positioned towards the right or the left in order  
to achieve the best possible installation.  
• before connecting the drain hose, remove any internal  
restrictions; this will prevent a build up of debris which  
could cause a blockage  
• remove any restrictions from the waste spigot and ensure  
that the sealing bung is removed (B).  
• To a suitable cold water connection point: before attaching  
the hose, run the water until it is perfectly clear so that any  
impurities that may be present in the water do not clog the  
appliance; after performing this operation, screw the inlet  
hose tightly onto a tap with a ¾ gas threaded connection.  
It MUST NOT be connected to a surface water drain.  
Untie the end of the GREY drainage hose from the rear  
of the appliance.  
• To a suitable hot water connection point: your dishwasher  
may be provided with hot water from the mains supply (if  
you have a central heating system with radiators) provided  
that it does not exceed a temperature of 60°C.  
Screw the hose to the tap as described for connection to  
a cold water supply.  
If fitting an under sink waste disposal unit, cut out the  
membrane, bung or blanking plug.  
* Only available in selected models.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advice regarding the first wash cycle  
Ensure the drain hose is securely  
attached, to prevent it coming away  
while the machine is in use and  
causing a flood.  
GB  
After the installation, remove the stoppers from the racks and the  
retaining elastic elements from the upper rack, if any.  
Immediately before the first washing, completely fill the salt  
dispenser with water and add only then approximately 1 kg of salt  
(see chapter entitled Rinse aid and refined salt). The water may  
overflow: this is normal and is not a cause for concern. Select  
the water hardness value (see chapter entitled Rinse aid and  
refined salt). - After the salt has been poured into the machine,  
the LOW SALT indicator light* switches off.  
Fit hose to waste securely using  
a “Jubilee” type clip.  
Anti-flooding protection*  
To ensure floods do not occur, the dishwasher:  
- is provided with a special system which blocks the water supply  
in the event of anomalies or leaks from inside the appliance.  
If the salt dispenser is not filled, the water softener and the  
heating element may get damaged as a result.  
Some models are also equipped with the supplementary safety  
device New Acqua Stop*, which guarantees anti-flooding  
protection even in the event of a supply hose rupture.  
The machine has a buzzer/set of tones (depending on the  
dishwasher model) to inform the user that a command has  
been implemented: power on, cycle end etc.  
WARNING: HAZARDOUS VOLTAGE!  
The symbols/indicator lights/LEDs on the control panel/  
display may vary in colour and may have a flashing or fixed  
light (depending on the dishwasher model).  
Under no circumstance should the water inlet hose be cut as it  
contains live electrical parts.  
The display* provides useful information concerning the  
type of wash cycle, wash cycle phase, remaining time,  
temperature etc.  
The Company shall not be held responsible for any incidents  
that occur if these regulations are not observed.  
* Only available in selected models.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the  
appliance  
Overall view  
GB  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Upper rack  
Upper sprayer arm  
Tip-up dispensers  
Rack height adjuster  
Lower rack  
Lower sprayer arm  
Washing filter  
Salt dispenser  
Detergent dispenser, rinse-aid dispenser and  
Active Oxygen device*  
Data plate  
Control panel***  
10.  
11.  
Control panel  
Extra Drying option button  
Half Load option button  
Button and  
Start/Pause  
button and  
indicator lights  
indicator light  
On-Off/Reset  
Wash-Cycle Selection buttons  
Multi-functional Tablets  
option button (Tabs)  
Short Time Option button  
Delayed Start  
buttons  
Low Salt indicator light  
Remaining Time indicator  
Display  
Washing and Drying indicator lights  
Low Rinse-Aid indicator light  
Blocked Filter indicator light  
Tap Shut-Off indicator light  
Wash-cycle indicator lights  
Wash-cycle indicator lights  
Delayed Start indicator light  
Short Time indicator light  
Half Load indicator lights  
Extra Drying indicator light  
Multi-Functional Tablets indicator light (Tabs)  
*** Only in completely built-in models * Only available in selected models.  
The number and type of wash cycles and options may vary depending on the dishwasher model.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the racks  
Tips  
Several dishwasher models are fitted with tip-up sectors*.  
They can be used in a vertical position when arranging dishes  
or in a horizontal position (lower) to load pans and salad bowls  
easily.  
GB  
Before loading the racks, remove all food residues from the  
crockery and empty liquids from glasses and containers. No  
preventive rinsing is needed under running water.  
Arrange the crockery so that it is held in place firmly and does  
not tip over; and arrange the containers with the openings facing  
downwards and the concave/convex parts placed obliquely,  
thus allowing the water to reach every surface and flow freely.  
Make sure that the lids, handles, trays and frying pans do not  
prevent the sprayer arms from rotating. Place any small items  
in the cutlery basket.  
Since plastic dishes and non-stick frying pans usually retain more  
water drops, their drying will be not so good as that of ceramic  
or stainless-steel dishes.  
Lightweight items such as plastic containers should be placed  
in the upper rack and arranged so that they cannot move.  
After loading the appliance, make sure that the sprayer arms  
can rotate freely.  
Cutlery basket  
The modular basket can slide to optimise the space inside the  
lower rack. It is equipped with top grilles for improved cutlery  
arrangement.  
Lower rack  
The lower rack can hold pans, lids, dishes, salad bowls, cutlery  
etc. Large plates and lids should ideally be placed at the sides.  
Knives and other utensils with sharp edges must be placed  
in the cutlery basket with the points facing downwards or they  
must be positioned horizontally in the tip-up compartments on  
the upper rack  
Upper rack  
Load this rack with delicate and lightweight crockery such as  
glasses, cups, saucers and shallow salad bowls.  
Very soiled dishes and pans should be placed in the lower rack  
because in this sector the water sprays are stronger and allow  
a higher washing performance.  
Several dishwasher models are fitted with tip-up sectors*.  
They can be used in a vertical position when arranging tea/  
dessert saucers or in a lower position to load bowls and food  
containers.  
*Only available in selected models with different numbers and  
positions.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tip-up compartments with adjustable position  
The side tip-up compartments can be positioned at three  
different heights to optimize the arrangement of crockery inside  
the rack.  
The upper rack can be adjusted for height based on requirements:  
high position to place bulky crockery in the lower rack and low  
position to make the most of the tip-up compartments/sectors  
by creating more space upwards.  
GB  
Wine glasses can be placed safely in the tip-up compartments  
by inserting the stem of each glass into the corresponding slots.  
Adjusting the height of the upper rack  
In order to make it easier to arrange the crockery, the upper rack  
may be moved to a higher or lower position.  
The height of the upper rack should be adjusted WHEN THE  
RACK IS EMPTY.  
NEVER raise or lower the rack on one side only.  
Cutlery tray*  
Some dishwasher models are fitted with a sliding tray which  
can be used to hold serving utensils or small cups. For optimum  
washing performance avoid positioning bulky crockery directly  
below the tray. The cutlery tray can be removed (see Figure).  
If the rack is equipped with a Lift-Up device* (see figure), lift  
it up by holding its sides. To restore the lower position, press  
the levers (A) at the sides of the rack and follow the rack down.  
Unsuitable crockery  
Wooden crockery and cutlery.  
Delicate decorated glasses, artistic handicraft and antique  
crockery. Their decorations are not resistant.  
Parts in synthetic material which do not withstand high  
temperatures.  
Copper and tin crockery.  
Crockery soiled with ash, wax, lubricating grease or ink.  
The colours of glass decorations and aluminium/silver pieces can  
change and fade during the washing process. Some types of  
glass (e.g. crystal objects) can become opaque after a number  
of wash cycles too.  
Damage to glass and crockery  
Caused by:  
Type of glass and glass production process.  
Chemical composition of detergent.  
Water temperature of rinse cycle.  
Tips:  
Only use glasses and porcelain guaranteed by the  
manufacturer as dishwasher safe.  
Use a delicate detergent suitable for crockery.  
Collect glasses and cutlery from the dishwasher as soon as  
the wash cycle is over.  
Before loading the tray, make sure the supports are properly  
coupled to the upper rack (see Figure).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start-up and use  
Starting the dishwasher  
Measuring out the detergent  
GB  
A good wash result also depends on the correct amount of  
detergent being used. Exceeding the stated amount does not  
result in a more effective wash and increases environmental  
pollution.  
1. Turn the water tap on.  
2. Press the ON/OFF button: The ON/OFF indicator light and  
the display light up.  
3. Open the door and pour in a suitable amount of detergent  
(see below).  
4. Load the racks (see Loading the racks) and shut the door.  
5. Select the wash cycle in accordance with the type of crockery  
and its soil level (see Table of wash cycles) by pressing the  
wash-cycle selection buttons.  
6. Select the wash options* (see adjacent information).  
7. Start the cycle by pressing the Start/Pause button: The wash  
indicator light comes on and the time left to the end of the cycle  
appears on the display.  
Based on how soiled the items are, the amount can  
be adjusted to individual cases using powder or liquid  
detergent.  
In the case of normally soiled items, use approximately either  
35 gr (powder detergent) or 35 ml (liquid detergent). If tablets  
are used, one tablet will be enough.  
If the crockery is only lightly soiled or it has been rinsed  
with water before being placed in the dishwasher, reduce  
the amount of detergent considerably.  
8. At the end of the cycle, the display shows END. Switch off the  
appliance by pressing the ON/OFF button, shut off the water tap  
and unplug the appliance from the electricity socket.  
9. Wait for a few minutes before removing the crockery in order  
to avoid burns. Unload the racks, beginning with the lower level.  
For good washing results also follow the instructions shown  
on the detergent box. For further questions please ask the  
detergent producers' Advice Offices.  
If the detergent dispenser is still closed, use the closing  
device “A” to open it.  
- The machine will switch off automatically during long  
periods of inactivity in order to minimise electricity  
consumption.  
AUTO WASH CYCLES*:some dishwasher models are  
equipped with a special sensor which can be used to assess  
the level of soiling and automatically select the most efficient  
and economical wash cycle accordingly. The duration of the  
auto wash cycles may vary due to the operation of the sensor.  
Introduce the detergent into the dry dispenser “B” only.  
Place the amount of detergent for pre-washing directly  
inside the tub.  
Changing a wash cycle in progress  
If a mistake was made in the wash cycle selection process, it is  
possible to change the cycle provided that it has only just begun:  
once the wash cycle has started, in order to change the wash  
cycle switch off the machine by pressing and holding the ON/  
OFF/Reset button. Switch it back on using the same button and  
select the desired wash cycle and options.  
1. When measuring out the detergent refer to the Table of wash  
cycles to add the proper quantity. Compartment B comprises  
a level showing the maximum quantity of liquid or powder  
detergent that can be added to each cycle.  
2. Remove detergent residues from the edges of the dispenser  
and close the cover until it clicks.  
Adding extra crockery  
Press the Start/Pause button and open the door, taking care to  
avoid the escaping steam, and place the crockery inside the  
dishwasher. Press the Start/Pause button: The cycle will start  
again after a long beep has been emitted.  
3. Close the lid of the detergent dispenser by pulling it up until  
the closing device is secured in place.  
The detergent dispenser automatically opens up at the right time  
according to the wash cycle.  
If all-in-one detergents are used, we recommend using the TABS  
option, because it adjusts the cycle so that the best washing  
and drying results are always achieved.  
If the delayed start has been set, at the end of the countdown  
the wash cycle will not start. It will stay in Pause mode.  
Press the Start/Pause button to pause the machine; the wash  
cycle is stopped.  
At this stage it is not possible to change the wash cycle.  
Only use detergent which has been specifically designed  
for dishwashers.  
DO NOT USE washing up liquid.  
Accidental interruptions  
Using excessive detergent may result in foam residue  
remaining in the machine after the cycle has ended.  
If the door is opened during the wash cycle or there is a power  
cut, the cycle stops. It starts again from the point at which it  
was interrupted once the door has been shut or the electricity  
supply is restored.  
The use of tablets is only recommended for models which  
offer the MULTI-FUNCTIONAL TABLETS option.  
To achieve the best results from each washing and drying  
cycle, powder detergent, rinse-aid liquid and salt should  
be used.  
* Only available in selected models.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash cycles  
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.  
Based on the different conditions of use, the wash-cycle duration and data can change.  
GB  
The number and type of wash cycles and options may vary depending on the dishwasher model.  
Water  
Energy  
Wash Cycle  
Duration  
Wash Cycle  
Drying  
Options  
Consumption (l/ Consumption  
cycle)  
(kWh/cycle)  
Delayed start – Half Load – Tabs –  
Extra Dry  
Eco  
Yes  
Yes  
03:10’  
11  
1,04  
Delayed start – Half Load – Tabs –  
Extra Dry – Short Time  
Intensive  
Normal  
02:30’  
02:00’  
01:00  
01:30  
00:30’  
00:10’  
01:20  
16,5  
16,0  
11,5  
12  
1,65  
1,3  
Delayed start – Half Load – Tabs –  
Extra Dry – Short Time  
Yes  
No  
Fast  
Delayed start – Half Load – Tabs  
1,1  
Delayed start –  
Half Load – Tabs – Extra Dry  
Delicates  
Express 30’  
Soak  
Yes  
No  
1,1  
Delayed start –  
Tabs  
8,5  
4
0,45  
0,01  
1,3  
Delayed start –  
Half Load  
No  
Sanitizing  
Yes  
Delayed start  
11,5  
Instructions on wash-cycle selection and detergent dosage  
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a  
normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 27  
gr/ml + 6 gr/ml** – 1 Tab (**Quantity of pre-washing detergent)  
2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab  
3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab  
4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab  
5. Cycle for delicate items, which are more sensitive to high temperatures 30 gr/ml – 1 Tab  
6. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab  
7. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.  
High-temperature disinfecting cycle. Ideal to clean crockery and feeding bottles. 30 gr/ml – 1 Tab  
8.  
Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special wash cycles and Options  
Notes:  
GB  
Optimum performance levels when using the “Fast" and "Express  
30’” cycles can be achieved by respecting the specified number  
of place settings.  
Extra drying*  
To improve the dryness level of the crockery, press the  
EXTRA DRYING button; the indicator light will illuminate. If it  
is pressed again the option will be deselected.  
A higher temperature during the final rinsing and a longer  
drying phase improve the dryness level.  
To reduce consumption even further, only run the dishwasher  
when it is full.  
Note for Test Laboratories: for information on comparative EN  
testing conditions, please send an email to the following address:  
The EXTRA DRYING option increases the duration of  
the wash cycle.  
Half load*  
Wash options*  
If there are not many dishes to be washed, a half load cycle  
may be used in order to save water, electricity and detergent.  
Select the wash cycle and press the HALF LOAD button: the  
indicator light will illuminate.  
The OPTIONS may only be set, changed or reset after  
the wash cycle has been selected and before the Start/  
Pause button has been pressed.  
Press the HALF LOAD button to deselect this option.  
Only the options which are compatible with the type of wash  
cycle set may be selected. If an option is not compatible  
with the selected wash cycle (see Table of wash cycles), the  
corresponding symbol flashes rapidly 3 times.  
Remember to halve the amount of detergent.  
If an option is selected which is not compatible with another  
(previously selected) option, it will flash 3 times and switch  
off, while the most recently selected option will remain active.  
To deselect an option which has been set by mistake, press  
the corresponding button again.  
Multi-functional tablets* (Tabs)  
This option optimises washing and drying results.  
When using multi-functional tablets, press the MULTI-  
FUNCTIONAL TABLETS button; the corresponding indicator  
will light up. If the button is pressed again, the option will be  
deselected.  
Delayed start  
It is possible to delay the start time of the cycle for a  
period of time between 1 and 24 hours:  
The “Multi-functional tablets” option results in a  
longer wash cycle.  
The use of tablets is only recommended for models  
having this option and it is not recommended with wash  
cycles which do not specify the use of multi-functional  
tablets.  
1. Select the desired wash cycle and any other options  
required, press the DELAYED START button. The relevant  
symbol starts flashing. Use the buttons + and - to select when  
the wash cycle will start (h01, h02 etc.)  
2. Confirm with the START/PAUSE button. The symbol stops  
flashing and the countdown begins.  
3. Once this time has elapsed, the DELAYED START symbol  
switches off and the wash cycle begins.  
To deselect the DELAYED START option, press the DELAYED  
START button until the text OFF appears.  
The Delayed Start function cannot be set once a wash  
cycle has been started.  
Short Time option  
This option can be used to reduce the duration of the main  
wash cycles while maintaining the same washing and drying  
performance levels.  
Having selected the option, press the Short Time button. To  
deselect the option, press the same button again.  
* Only available in selected models.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rinse aid and refined salt  
Only use products which have been specifically designed  
for dishwashers.  
obtained from the organisation which supplies your household  
with water.  
GB  
- Switch on the dishwasher using the ON/OFF button, wait a  
few seconds and switch it off using the ON/OFF button. Hold  
down the Start/Pause button for min. 3 seconds; switch on the  
machine using the ON/OFF button and access the adjustment  
menu - the salt indicator light is lit.  
- Select the desired level (1 to 5* max. based on the dishwasher  
model) using the ECO button (water softener set to medium  
level).  
Do not use table/industrial salt or washing-up liquid.  
Follow the instructions given on the packaging.  
If using a multi-functional product it is not necessary to add  
any rinse aid. However, we recommend that you add salt,  
especially if you live in an area where the water is hard or  
very hard. (Follow the instructions given on the packaging.)  
If you do not add salt or rinse aid, the LOW SALT* and  
LOW RINSE AID* indicator lights will stay lit.  
Press the ON/OFF button to save the setting.  
Even if using multi-functional tablets, the salt dispenser should  
still be filled.  
Measuring out the rinse aid  
Rinse aid makes it easier for the crockery to dry, as water runs off  
the surfaces more readily and therefore does not leave streaks  
or marks. The rinse aid dispenser should be filled:  
Average salt dispenser  
Water Hardness Table  
capacity duration**  
level  
°dH  
0 - 6  
6 - 11  
12 - 17 21 - 30  
17 - 34 31 - 60  
°fH  
0 - 10  
11 - 20  
mmol/l  
0 - 1  
1,1 - 2  
2,1 - 3  
3,1 - 6  
months  
7 months  
5 months  
3 months  
2 months  
1
2
3
4
When the LOW RINSE AID indicator light* on the control panel  
is illuminated, a reserve supply of rinse aid is still available  
for 1-2 cycles;  
34 - 50 61 - 90  
6,1 - 9  
2/3 weeks  
5*  
For values between 0°f and 10°f, we do not recommend the use of salt.  
* a setting of 5 may increase cycle duration.  
** 1 wash cycle per day.  
A
X
M
(°dH = hardness measured in German degrees - °f = hardness  
measured in French degrees – mmol/l = millimoles per litre)  
Measuring out the refined salt  
In order to obtain the best possible results from a wash cycle,  
make sure that the salt dispenser is never empty.  
Refined salt removes limescale from the water, thus avoiding  
the formation of deposits on crockery.  
The salt dispenser is located in the lower part of the dishwasher  
(see Description) and should be filled:  
1. Open the dispenser “D” by pressing and pulling up the tab  
on the lid;  
2. Carefully introduce the rinse aid as far as the maximum  
reference notch of the filling space - avoid spilling it. If this  
happens, clean the spill immediately with a dry cloth.  
3. Press the lid down until you hear a click to close it.  
NEVER pour the rinse aid directly into the appliance tub.  
• When the LOW RINSE AID indicator light on the control panel  
is illuminated *;  
1. Remove the lower rack and unscrew the cap (anticlockwise.)  
2. The first time you do this: fill the water tank right up to its edge.  
Rinse-aid dispenser setting  
If you are not completely satisfied with the drying results, you  
can adjust the quantity of rinse aid. Switch the dishwasher on  
and off using the On/Off button.  
Press the Start/Pause button 3 times; switch on the machine  
using the ON/OFF button and access the adjustment menu - the  
rinse-aid indicator light is lit (set to factory level).  
Select the level of rinse aid supply using the ECO cycle button  
(0 to 4 max.)  
Press the ON/OFF button to save the setting.  
If the rinse aid level is set to ZERO, no rinse aid will be supplied.  
The LOW RINSE AID indicator light will not illuminate if you run  
out of rinse aid.  
3. Position the funnel*(see figure) and fill the salt dispenser up to  
the edge (approximately 1 kg.) It is normal  
for a little water to leak out.  
4. Remove the funnel* and wipe any salt  
residues away from the opening; rinse the  
cap under running water and then screw  
it on, the head facing downwards so as  
to let the water flow out of the four slots  
(star-shaped arrangement) in the lower part of the cap (cap  
with green float*.)  
It is advisable to perform this procedure every time you add  
salt to the dispenser.  
If there are streaks on the crockery, set the adjustment device  
to a lower number (1-2.)  
Make sure the cap is screwed on tightly so that no detergent can  
get into the container during the wash cycle (this could damage  
the water softener beyond repair.)  
If there are drops of water or limescale marks, set the  
adjustment device to a higher number (3-4.)  
When necessary, measure out the salt before a wash cycle  
so that any saline solution which has leaked out of the salt  
dispenser is removed.  
Setting the water hardness  
Every dishwasher is equipped with a water softener which, by  
using refined salt specially designed for this type of appliance,  
supplies water without limescale which is then used to wash  
the crockery.  
This dishwasher offers a setting which helps to reduce pollution  
and optimises washing performance in accordance with the  
water hardness level in your area. This information can be  
* Only available in selected models.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and maintenance  
Shutting off the water and electricity  
supplies  
Cleaning the filters  
GB  
The filter assembly consists of three filters which remove food  
residues from the washing water and then recirculate the water.  
They should be cleaned if you wish to achieve the best results  
in every wash.  
Turn off the water tap after every wash cycle to avoid leaks.  
Always unplug the appliance when cleaning it and when  
performing maintenance work.  
Clean the filters regularly.  
Cleaning the dishwasher  
The dishwasher should not be used without filters or if the  
filter is loose.  
The external surfaces of the machine and the control panel  
can be cleaned using a non-abrasive cloth which has been  
dampened with water. Do not use abrasive detergents or .  
solvents.  
• After several washes, check the filter assembly and if necessary  
clean it thoroughly under running water, using a non-metallic  
brush and following the instructions below:  
1. Turn the cylindrical filter C in an anti-clockwise direction and  
pull it out (fig. 1).  
Any marks on the inside of the appliance may be removed  
using a cloth dampened with water and a little vinegar.  
2. Remove the cup filter B by exerting a slight pressure on the  
side flaps (fig. 2);  
3. Slide out the stainless-steel plate filter A. (fig. 3).  
4. Inspect the trap and remove any food residues. NEVER  
REMOVE the wash-cycle pump protection (black detail) (fig.4).  
Preventing unpleasant odours  
Always keep the door of the appliance ajar in order to avoid  
moisture from forming and being trapped inside the machine.  
Clean the seals around the door and detergent dispensers  
regularly using a damp sponge. This will avoid food becoming  
trapped in the seals, which is the main cause behind the  
formation of unpleasant odours.  
Cleaning the sprayer arms  
Food residue may become encrusted onto the sprayer arms  
and block the holes used to spray the water. It is therefore  
recommended that you check the arms from time to time and  
clean them with a small non-metallic brush.  
The two sprayer arms may both be removed.  
To remove the upper sprayer  
arm, turn the plastic locking ring  
in an anti-clockwise direction.  
The upper sprayer arm should be  
replaced so that the side with the  
greater number of holes is facing  
upwards.  
The lower sprayer arm can be  
removed by pressing on the side  
tabs and pulling it upwards.  
After cleaning the filters, re-place the filter assembly and fix it in  
position correctly; this is essential for maintaining the efficient  
operation of the dishwasher.  
Leaving the machine unused for extended  
periods  
Disconnect the appliance from the electricity supply and shut  
off the water tap.  
Cleaning the water inlet filter*  
If the water hoses are new or have not been used for an extended  
period of time, let the water run to make sure it is clear and free of  
impurities before performing the necessary connections. If this  
precaution is not taken, the water inlet could become blocked  
and damage the dishwasher.  
Leave the door of the appliance ajar.  
• When you return, run a wash cycle when the dishwasher is  
empty.  
Clean the water inlet filter at the tap outlet regularly.  
- Turn off the water tap.  
- Unscrew the end of the water inlet hose, remove the filter and  
clean it carefully under running water.  
- Re-place the filter and screw the water hose back into position.  
* Only available in selected models.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.  
GB  
Problem:  
Possible causes / Solutions:  
The dishwasher does not start or cannot  
be controlled.  
Switch off the appliance by pressing the ON/OFF button, switch it back  
on after approximately one minute and reset the cycle.  
The appliance has not been plugged in properly.  
The dishwasher door has not been shut properly.  
The lock was released. Strongly push the door until a “clacking” noise  
is heard.  
The door won’t close.  
No water drains from the  
dishwasher.  
The dishwasher cycle has not yet finished.  
The water inlet hose is bent (see Installation).  
The drain duct is blocked.  
The filter is clogged up with food residues.  
The dishwasher makes excessive  
noise.  
The dishes are rattling against each other or against the sprayer arms.  
An excessive amount of foam has been produced: the detergent has not  
been measured out correctly or it is not suitable for use in dishwashers  
(see Start-up and use).  
The dishes and glasses are  
covered in a white film or  
limescale deposits.  
The level of refined salt is low or the dosage setting is not suited to the  
hardness of the water (see Rinse aid and salt).  
The lid on the salt dispenser is not closed properly.  
The rinse aid has been used up or the dosage is too low.  
The dishes and glasses are  
streaked or have a bluish tinge.  
The rinse aid dosage is too high.  
The crockery has not been dried  
properly.  
A wash cycle without a drying cycle has been selected.  
The rinse aid has been used up or the dosage is too low (see Rinse aid  
and salt).  
The rinse aid dispenser setting is not suitable.  
The crockery is made from non-stick material or plastic.  
The dishes are not clean.  
The racks are overloaded (see Loading the racks).  
The crockery has not been arranged properly.  
The sprayer arms cannot rotate freely.  
The wash cycle is too gentle (see Wash cycles).  
An excessive amount of foam has been produced: the detergent has not  
been measured out correctly or it is not suitable for use in dishwashers  
(see Start-Up and Use).  
The lid on the rinse aid compartment has not been shut correctly.  
The filter is dirty or blocked (see Care and maintenance).  
The refined salt level is low (see Rinse aid and salt).  
Switch off the appliance by pressing the ON/OFF button. Shut off the  
water tap to eliminate the risk of flooding and remove the plug from the  
electrical socket.  
Make sure the water inlet filter has not become blocked by impurities  
(see “Care and maintenance” chapter).  
The dishwasher does not take any  
water in - Tap shut-off alarm  
(indicator light ON/OFF flashing; H2O and  
tap symbol displayed; F 6 appears after a  
few seconds).  
There is no water in the mains supply.  
The water inlet hose is bent (see Installation).  
Turn on the tap and the appliance will start after a few minutes.  
The appliance lock has been activated because no action was taken  
when the beeps sounded.  
Switch off the appliance using the ON/OFF button, turn on the tap and  
switch the appliance back on after a few seconds by pressing the same  
button. Re-program the appliance and restart the wash cycle.  
Clogged filter alarm  
The “filter” symbol on the display will light  
up.  
Make sure the wash cycle has ended, open the dishwasher door  
and clean the cup filter and stainless-steel filter (see “Care and  
maintenance” chapter). The “blocked filter” symbol will go off when the  
following cycle starts.  
* Only available in selected models.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
After Sales Service  
Appliance Registration  
GB  
No one is better placed to care for your Hotpoint  
appliance during the course of its working life than  
us - the manufacturer.  
We want to give you additional benefits of Hotpoint  
ownership. To activate your free 5 year parts guarantee  
you must register your appliance with us.  
UK: 08448 24 24 24  
Republic of Ireland: 01 230 0800  
Essential Contact Information  
Hotpoint Service  
We are the largest service team in the country offering  
you access to 400 skilled telephone advisors and 1000  
fully qualified engineers on call to ensure you receive fast,  
reliable, local service.  
Indesit Company UK Ltd. Morley Way, Peterborough,  
PE2 9JB  
Indesit Company Unit 49 Airways Industrial  
Estate,Dublin 17  
UK: 08448 224 224  
Republic of Ireland: 0818 313 413  
Recycling and Disposal Information  
As part of Hotpoint’s continued commitment to helping  
the environment, Hotpoint reserves the right to use quality  
recycled components to keep down customer costs and  
minimise material wastage.  
Please note: Our advisors will require the following  
information:  
Please dispose of packaging and old appliances carefully.  
To minimise risk of injury to children, remove the door,  
plug and cut mains cable off flush with the appliance.  
Dispose of these parts separately to ensure that the  
appliance can no longer be plugged into a mains socket  
and the door cannot be locked shut.  
Model number:  
Serial number:  
Parts and Accessories  
We supply a full range of genuine replacement parts as  
well as accessory products that protect and hygienically  
clean your appliance to keep it looking good and  
functioning efficiently throughout its life.  
UK: 08448 225 225  
Republic of Ireland: 0818 313 413  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
GB  
Guarantee  
12 months Parts and Labour Guarantee  
Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for  
twelve months from the date of purchase.  
This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either  
workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.  
This guarantee is subject to the following conditions:  
-
The appliance has been installed and operated correctly and in accordance with our operating and  
maintenance instructions.  
-
-
-
The appliance is used only on the electricity or gas supply printed on the rating plate.  
The appliance has been used for normal domestic purposes only.  
The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any  
person not authorised by us.  
-
-
-
Any repair work must be undertaken by us or our appointed agent.  
Any parts removed during repair work or any appliance that is replaced become our property.  
The appliance is used in the United Kingdom or Republic of Ireland.  
The guarantee does not cover:  
-
-
-
Damage resulting from transportation, improper use, neglect or interference or as a result of improper  
installation.  
Replacement of any consumable item or accessory. These included but not limited to: plugs, cables, batteries,  
light bulbs, fluorescent tubes and starters, covers and filters.  
Replacement of any removable parts made of glass or plastic.  
THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON-  
DOMESTIC PREMISES.  
5 Year Parts Guarantee  
Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering  
your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our  
engineer’s time. To activate the extra parts warranty on your appliance, simply call our registration line on 08448 24  
24 24 (Republic of Ireland 01 230 0800)  
Extended Guarantees  
We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills  
for the life of your policy. To find the ideal plan for you please call our advice line on 08448 226 226 (Republic of  
Ireland 01 230 0233).  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance if you experience any  
technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448 224 224  
(Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to  
call.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
195113124.03  
03/2014 jk - Xerox Fabriano  
GB  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Drill G7943 User Manual
Grundig CRT Television GLCD3201 User Manual
Haier Washer Dryer WD55dHSHAT User Manual
Hans Grohe Indoor Furnishings Axor Citterio User Manual
Harbor Freight Tools Paint Sprayer 47274 User Manual
Hasbro Games Go Go Worms User Manual
HP Hewlett Packard Computer Drive 312970 003 User Manual
HP Hewlett Packard Digital Camera R707 User Manual
Humminbird Fish Finder Model Matrix 87 User Manual
Husqvarna Snow Blower 5524SEB User Manual