IBM UPS 7500XHV
IBM UPS 10000XHV
Uninterruptible Power Supply
Operation and Setup Guide
25R5636
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Safety........................................................................................................................................................................................1
1: INSTALLATION.....................................................................................................................................................................4
Introduction .............................................................................................................................................................................4
Unpacking................................................................................................................................................................................4
Removing the Battery Modules ................................................................................................................................................4
Positioning the Uninterruptible Power Supply........................................................................................................................5
Hardwiring the Uninterruptible Power Supply........................................................................................................................5
Mounting the Uninterruptible Power Supply in a Rack and Attaching the Front Bezel ..........................................................6
Installing and Connecting the Batteries and Attaching the Front Battery Bezel .....................................................................7
Tower Configuration................................................................................................................................................................8
Connecting Equipment and Power to the Rear Panel of the Uninterruptible Power Supply...................................................9
Startup......................................................................................................................................................................................9
Selecting the Output Voltage via Terminal Mode ..................................................................................................................10
2: OPERATION..........................................................................................................................................................................11
Front Display Panel...............................................................................................................................................................11
On Battery Operation ............................................................................................................................................................12
Determining On Battery Runtime...........................................................................................................................................12
Battery Runtime Tables..........................................................................................................................................................12
3: USER CONFIGURABLE ITEMS........................................................................................................................................14
Emergency Power Off (EPO) Option.....................................................................................................................................15
4: STORAGE, MAINTENANCE, SHIPPING, AND SERVICE ...........................................................................................16
Storage...................................................................................................................................................................................16
Replacing the Battery Modules..............................................................................................................................................16
Replacing the Network Management Card............................................................................................................................16
Shipping and Service..............................................................................................................................................................16
5: HARDWARE MAINTENANCE INFORMATION............................................................................................................17
Customer Replaceable Unit Part Numbers............................................................................................................................17
6: TROUBLESHOOTING.........................................................................................................................................................18
7: GETTING HELP AND TECHNICAL ASSISTANCE.......................................................................................................20
Before you call.......................................................................................................................................................................20
Using the Documentation.......................................................................................................................................................20
Getting help and information from the World Wide Web ......................................................................................................20
Software service and support.................................................................................................................................................20
Hardware service and support...............................................................................................................................................20
Replacement part handling....................................................................................................................................................21
8: NOTICES, TRADEMARKS, AND RADIO FREQUENCY WARNINGS.......................................................................22
Notices ...................................................................................................................................................................................22
Attention! Life Support...........................................................................................................................................................22
Edition Notice ........................................................................................................................................................................23
Trademarks............................................................................................................................................................................23
Important notes......................................................................................................................................................................23
Product recycling and disposal..............................................................................................................................................23
Battery return program..........................................................................................................................................................23
Electronic emission notices....................................................................................................................................................24
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d'installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto, lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will
expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
ADVERTENCIA: El contacto con el cable de este producto o con cables de accesorios que se venden junto con
este producto, pueden exponerle al plomo, un elemento químico que en el estado de California de los Estados
Unidos está considerado como un causante de cancer y de defectos congénitos, además de otros riesgos
reproductivos. Lávese las manos después de usar el producto.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION! Handling Safety - Use safe practices when lifting.
<18 kg (<40 lb)
32–55 kg (70–120 lb)
>55 kg (>120 lb)
18–32 kg (40–70 lb)
>10º
CAUTION! Electrical Safety
Electrical Current from power, telephone, and communication cables is hazardous. Please read the following safety statements.
•
•
•
•
•
•
Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.
Connect all power cords to a properly wired and grounded electrical outlet.
Connect to properly wired outlets any equipment that will be attached to this product.
When possible, use one hand only to connect or disconnect signal cables.
Never turn on any equipment when there is evidence of fire, water, or structural damage.
Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise
in the installation and configuration procedures.
•
Connect and disconnect cables as described in the following steps when installing, moving, or opening covers on this product or attached devices.
To Connect:
To Disconnect:
1.
2.
3.
4.
5.
Turn everything OFF.
1.
2.
3.
4.
Turn everything OFF.
First attach all cables to devices.
Attach signal cables to connectors.
Attach power cords to outlet.
Turn device ON.
First remove power cords from outlet.
Remove signal cables from connectors.
Remove all cables from devices.
•
•
•
•
Do not work alone under hazardous conditions.
High current through conductive materials could cause severe burns.
Check that the power cord(s), plug(s), and sockets are in good condition.
When grounding cannot be verified, disconnect the equipment from the utility power outlet before installing or connecting to other equipment. Reconnect
the power only after all connections are made.
•
•
Do not handle any metallic connector before the power has been disconnected.
Connect the equipment to a three wire utility outlet (two poles plus ground). The receptacle must be connected to appropriate branch circuit/mains protec-
tion (fuse or circuit breaker). Connection to any other type of receptacle may result in risk of electrical shock.
•
In order to maintain compliance with the EMC directive for products sold in Europe, output cords attached to the uninterruptible power supply should not
exceed 10 meters in length.
CAUTION! De-energizing Safety
•
•
The uninterruptible power supply has an internal energy source, the battery. The output may be energized when the unit is not connected to a utility power
outlet.
To de-energize the uninterruptible power supply, press the OFF button to shut the equipment off. Unplug the uninterruptible power supply from the utility
power outlet. Disconnect the external batteries where applicable and disconnect the internal battery (see Operation and Setup Guide). Push the ON button
to de-energize the capacitors.
CAUTION! Battery Safety
•
•
•
•
This equipment contains potentially hazardous voltages. Refer to your product documentation to determine which parts are user-replaceable.
Do not dispose of batteries in a fire; they may explode.
Do not open or mutilate batteries. They contain an electrolyte that is toxic and harmful to the skin and eyes.
To avoid personal injury due to energy hazard, remove wristwatches and jewelry such as rings when replacing the batteries. Use tools with insulated han-
dles.
•
Replace the battery module with the same number and type as originally installed in the equipment.
Be sure to deliver the spent battery to a recycling facility.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1: INSTALLATION
Introduction
The IBM® UPS 7500XHV and UPS 10000XHV models are high-performance uninterruptible power supplies, designed to pre-
vent blackouts, brownouts, sags, and surges from reaching your computer and other sensitive electronic equipment. The uninter-
ruptible power supply filters small utility line fluctuations and isolates your equipment from large disturbances by internally
disconnecting from the utility line. The uninterruptible power supply provides continuous power from its internal battery until
the utility line returns to safe levels or the battery is fully discharged.
Unpacking
Attention:
!
!
Read the Safety Instructions in this documentation before you install the uninterruptible power supply.
The uninterruptible power supply comes with its battery disconnected.
Note: The illustrations in this documentation might differ slightly from your hardware.
Inspect the uninterruptible power supply upon receipt. Accidents and damage can occur during shipment. Notify the carrier and
your IBM marketing representative or authorized reseller if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
"
"
"
"
"
Uninterruptible power supply
Two front bezels
Rail kit
Tower conversion kit
Accessory kit containing:
"
"
"
"
"
Quick Installation Guide
Documentation CD
PowerChute® Business Edition CD
Network Management Card CD
Warranty Flyer
"
"
"
"
"
Rack-mounting brackets
Temperature probe
Serial communication cable – 4.6 m (15 ft)
Serial to USB adapter cable – 2 m (6.5 ft)
Four output power cables – 2 m (6.5 ft)
You will need the following tools to install the uninterruptible power supply:
"
"
"
"
Utility knife or scissors
Two Philips screwdrivers (#1 and #2)
Two wrenches (7/16” and 1/4”)
Cage nut insertion tool or flat-blade screwdriver (for installing cage nuts in some rack cabinets)
Removing the Battery Modules
The uninterruptible power supply is heavy. To lighten the weight of the unit, remove the battery modules.
! Remove the battery doors.
" Remove all battery modules.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning the Uninterruptible Power Supply
Attention: The uninterruptible power supply will remain heavy without the battery modules. Select a location
sturdy enough to handle the weight.
32–55 kg
(70–120 lb)
Do not operate the uninterruptible power supply in excessive dust or in temperature and humidity conditions outside the speci-
fied limits.
Make sure that the air vents on the front and rear of the uninterruptible power supply are not blocked.
Placement of the unit should correspond with the following graphical depiction.
Hardwiring the Uninterruptible Power Supply
Attention: Wiring must be performed by a qualified electrician.
1. Install a utility circuit breaker according to local electrical codes (see tables below) for input wiring.
200/208 V Applications
Input Connection
Output Connection (Optional)
Single-Phase: Wire to L1, N, and
.
Wire to L1A, N1, and
.
System
Wiring
Voltage
Current
Full Load
(Nominal)
External
Circuit Breaker
(typical)
Wire Size
(typical)
UPS 7500XHV
Input
200/208 V
38 amps
50 amps / 2-pole
(as needed)
10 mm2
Output
Input
200/208 V
200/208 V
38 amps
50 amps
10 mm2
16 mm2
UPS 10000XHV
63 or 70 amps / 2-
pole
Output
200/208 V
50 amps
(as needed)
16 mm2
220/230/240 V Applications
Input Connection
Output Connection (Optional)
Single-Phase: Wire to L1, N, and
.
Wire to L1A, N1, and
.
Three-Phase: Wire to L1, L2, L3, N, and
.
System
Wiring
Number
of
Phases
Voltage
Current
Full Load
(Nominal)
External
Circuit Breaker
(typical)
Wire Size
(typical)
UPS 7500XHV
Input
Input
1
3
220/230/240 V 38 amps
50 amps / 2-pole
50 amps/ 4-pole
10 mm2
10mm2
380/400/415 V 14 amps/
phase when online,
38 amps on L1 in
bypass
Output
Input
1
1
3
220/230/240 V 38 amps
(as needed)
10 mm2
16 mm2
16 mm2
UPS 10000XHV
220/230/240 V 50 amps
63 amps / 2-pole
63 amps/ 4-pole
Input
380/400/415 V 18 amps/ phase
when online, 50
amps on L1 in
bypass
Output
1
220/230/240 V 50 amps
(as needed)
16 mm2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Switch the uninterruptible power supply input circuit breaker (see A in the diagram that follows) and the utility circuit
breakers off.
3. Remove the access panel (see B in the diagram).
4. Remove the circular knockouts on the access panel.
5. Run wires through the access panel to the terminal blocks. Connect the wire to the ground block first. Adhere to all national
and local electrical codes. (See tables and diagram.)
6. Use appropriate cable fitting to achieve strain-relief on the hardwired input and output power cables.
7. For three-phase input, set the Input Phase Selector switch (see C in the diagram) to ‘3’. For single-phase input, leave the
switch in the default position of ‘1’.
8. Switch the circuit breakers on.
9. Check the line voltages.
10. Replace the access panel.
Mounting the Uninterruptible Power Supply in a Rack and Attaching the Front Bezel
! Attach the mounting brackets.
" Install the rails per the rail installation diagram in the Rail
Kit. Referencing the chart below, install the cage nuts (or clip
nuts). The solid squares indicate the cage nut or clip nut loca-
tion. Mount the uninterruptible power supply at the bottom of
the rack.
Note: Leave 3 U of space below the uninterruptible power
supply for each battery pack that you plan to install.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
# Secure the uninterruptible power supply in the rack.
$ Attach the front bezel.
Installing and Connecting the Batteries and Attaching the Front Battery Bezel
! Install all battery modules.
" Connect the batteries.
# Reinstall and secure the battery doors with the captive
screws. Make sure the cords are positioned so that they do not
get pinched.
$ Attach the front battery bezel.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Tower Configuration
Attention: Before converting to a tower configuration, remove the battery modules (see Removing the Battery Modules).
! Remove the rail guides.
" Bring the unit to tower position, and remove the display
bezel by sliding to the left and out. Rotate the display bezel
and reinstall. Install the first battery module at the bottom.
# Reinstall the remaining three battery modules.
$ Connect the batteries.
% Reinstall and secure the battery doors with captive
screws. Make sure that the cords are positioned so that they do
not get pinched. Attach the top panels.
& Attach the bezels.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Equipment and Power to the Rear Panel of the Uninterruptible Power Supply
INDEX ITEM
DESCRIPTION
1
2
3
Outlets
Connect equipment to the uninterruptible power supply.
Each circuit breaker protects its nearest outlet.
Output Circuit Breakers
EPO Terminal
The optional Emergency Power Off (EPO) feature enables connected
loads to be immediately de-energized from a remote location, without
switching to battery operation. See Emergency Power Off (EPO) Option.
4
5
Bypass Switch
Serial Port
This switch will put the unit in bypass mode. See Operation.
Power management software and serial port communication can be used
with the uninterruptible power supply. Use only cables supplied or ap-
proved by IBM.
Note: Use the supplied serial cable to connect to the serial port. Do not
use a standard serial interface cable because it is incompatible with the
uninterruptible power supply connector.
6
Integrated Environmental
Monitor
This Network Management Card monitor features a tempera-
ture/humidity probe, two input contacts, and a two-position output relay.
For information on connecting and using the probes, contacts, and relay,
see the Network Management Card CD.
The uninterruptible power supply is protected from extreme overloads when in
the on position. The breaker must be on for the unit to operate.
7
Input Circuit Breaker
8
Ethernet Port/ Network
Management Card
Connect the uninterruptible power supply to the network.
9
Battery Pack Connectors
Optional battery packs provide extended runtime during power outages.
See 3U Extend Run Battery Pack Operation and Setup Guide.
10
11
Access Panel
Provides access to the terminal blocks. See Hardwiring the Uninterrupti-
ble Power Supply.
TVSS Screw
The uninterruptible power supply features a transient voltage surge-
suppression (TVSS) screw for connecting the ground lead on surge sup-
pression devices such as telephone and network line protectors. When
connecting a grounding cable, disconnect the uninterruptible power sup-
ply from the utility power outlet.
Startup
1. Hardwire the uninterruptible power supply. See Hardwiring the Uninterruptible Power Supply.
2. Connect equipment to the uninterruptible power supply.
3. Turn on all connected equipment. To use the uninterruptible power supply as a master on/off switch, be sure all connected
equipment is turned on.
4. Press the
button on the front panel to turn on the uninterruptible power supply.
5. Select the ouput voltage (default is 230 V). See Setting the Output Voltage via Terminal Mode.
Note: For setting the number of external battery packs through Terminal Mode, see the 3U Extend Run Battery Pack Op-
eration and Setup Guide.
6. Configure the Network Management Card (optional).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Output Voltage via Terminal Mode
Terminal Mode is a menu driven interface that enables enhanced configuration of the uninterruptible power supply.
Connect the serial cable to the serial port on the back of the uninterruptible power supply.
When using the PowerChute® Network Shutdown utility:
1. Exit the PowerChute Business Edition agent and server using the following steps:
a. From the desktop, click Start=> Settings=> Control Panel=> Administrative Tools=> Services.
b. Select PCBE Server and PCBE Agent; then, right click the mouse and select Stop.
2. Open a terminal program, for example HyperTerminal.
From the desktop, click Start => Programs => Accessories => Communication =>HyperTerminal.
3. Double-click on the HyperTerminal icon.
a. Follow the prompts to choose a name and select an icon. Disregard the message, must install a modem, if it is dis-
played. Click OK.
b. Select the COM port that is connected to your uninterruptible power supply. The port settings are:
#
#
#
#
#
bits per second - 2400
data - bits 8
parity - none
stop bit - 1
flow control - none
c. Click Enter.
4. Once the blank terminal window is open, follow these steps to configure the output voltage:
a. Press Enter to initiate terminal mode. Press Enter multiple times, until the User Name prompt is displayed. Follow the
prompts. Type slowly, waiting until each character is displayed on the screen before typing the next character.
Network Management Card defaults:
•
•
User Name: apc
Password: apc
b. Press 1 and Enter to select Device Manager.
Select the number corresponding to the desired model and press Enter.
c. Press 3 and Enter to select Configuration.
d. Press 2 and Enter to select Line Transfer.
e. Press 3 and Enter to select Output Voltage.
Select the number corresponding to the desired voltage setting and press Enter.
f. Press 5 and Enter to Accept Changes.
g. Press Esc multiple times to return to the main menu.
h. Press 4 and Enter to log out.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2: OPERATION
Front Display Panel
INDICATOR
DESCRIPTION
Online
This LED is lit when the uninterruptible power supply is supplying utility power to the
connected equipment and performing double conversion to supply power to the con-
nected equipment. If not lit, the uninterruptible power supply is either not turned on, or
is supplying battery power. When flashing, the uninterruptible power supply is running
an internal self-test.
On Battery
Bypass
This LED is lit when the uninterruptible power supply is supplying battery power to the
connected equipment.
This LED is lit when the unit is sending utility power directly to the connected equip-
ment. Bypass mode operation is the result of an internal fault, an overload condition, or
a user-initiated command (performed manually through the manual bypass switch).
Battery operation is not available while the uninterruptible power supply is in bypass
mode. See Troubleshooting.
Fault
This LED is lit when the uninterruptible power supply detects an internal fault. See
Troubleshooting.
Overload
This LED is lit and the uninterruptible power supply emits a sustained alarm tone when
the connected loads are drawing more than the uninterruptible power supply power
rating. See Troubleshooting.
Replace Battery
Failure of a battery self-test causes the uninterruptible power supply to emit short beeps
for one minute and this LED to be lit. See Troubleshooting.
FEATURE
FUNCTION
Power On
Press this button to turn on the uninterruptible power supply. (Additional capabilities
will be described later in the document.)
Power Off
Self-Test
Press this button to turn off the uninterruptible power supply.
Automatic: The uninterruptible power supply performs a self-test automatically when
turned on, and every two weeks thereafter (by default). During the self-test, the uninter-
ruptible power supply briefly operates the connected equipment on battery.
If the uninterruptible power supply fails the self-test, the replace battery LED is lit and
immediately returns to online operation. The connected equipment is not affected by a
failed test. Allow the battery to recharge for 24 hours and perform another self-test. If it
fails, the battery must be replaced.
Manual: Press and hold the
button for a few seconds to initiate the self-test.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE
FUNCTION
Diagnostic Utility
Voltage
The uninterruptible power supply has a diagnostic feature that displays the utility volt-
age.
Note: The uninterruptible power supply starts a self-test as part of this procedure. The
self-test does not affect the voltage display.
Press and hold the
button to view the utility voltage bar graph display. After a few
seconds, this five-LED Battery Charge
show the utility input voltage.
display on the right of the front panel will
Refer to the figure to the left for the voltage reading corresponding to the configured
nominal output voltage.
The display indicates that the voltage is between the displayed value on the list and the
next higher value.
If three LEDs are lit, the utility voltage is within the normal range. If no LEDs are lit
and the uninterruptible power supply is plugged into a properly functioning utility
power outlet, the line voltage is extremely low. If all five LEDs are lit, the line voltage
is extremely high and should be checked by an electrician.
On Battery Operation
The uninterruptible power supply automatically switches to battery operation if the utility power fails. While running on battery,
an alarm beeps four times every 30 seconds.
Press the
button to silence this uninterruptible power supply alarm. If the utility power does not return, the uninterruptible
power supply continues to supply power to the connected equipment until the battery is fully discharged.
If you are not using PowerChute, shut down the operating system and turn off the computer before the uninterruptible power
supply fully discharges the battery.
Determining On Battery Runtime
The uninterruptible power supply battery charges when connected to utility power. The battery charges to 90% capacity during
the first three hours of normal operation. Do not expect full battery run capability during the initial charge period.
Battery Runtime Tables
The dark gray shaded areas in the charts that follow represent minutes; the other areas represent hours.
Note: The recharge time is the approximate time it takes to get to a 90% capacity from a complete discharge at a 50% load.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
UPS 7500XHV Model:
Number of Battery Packs
Load (W)
50
Internal
7.56
6.00
4.16
3.16
2.51
2.11
1.80
1.56
1.38
1.23
1.10
55
+1
13.83
10.93
7.65
5.83
4.68
3.91
3.33
2.90
2.56
2.30
2.08
1.73
1.50
1.28
1.13
1.00
48
+2
21.50
17.06
11.93
9.11
7.36
6.12
5.25
4.52
4.01
3.61
3.28
2.74
2.35
2.05
1.81
1.61
1.28
1.05
55
+4
37.68
29.83
20.90
16.00
12.89
10.75
9.23
8.00
7.03
6.38
5.78
4.83
4.16
3.63
3.23
2.90
2.28
1.88
1.65
1.36
1.06
52
100
200
300
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
2500
3000
3400
4000
5000
6000
47
41
36
32
24
19
39
17
34
13
28
46
10
21
35
7
16
28
Recharge
Hours
3
7
10
17
UPS 10000XHV Model:
Number of Battery Packs
Load (W)
50
Internal
7.56
6.00
4.16
3.16
2.55
2.11
1.80
1.56
1.38
1.23
1.16
55
+1
13.83
10.93
7.65
5.83
4.68
3.91
3.33
2.90
2.56
2.30
2.08
1.73
1.50
1.28
1.13
1.00
48
+2
21.55
17.06
11.93
9.11
7.35
6.12
5.24
4.56
4.05
3.61
3.28
2.73
2.35
2.05
1.81
1.61
1.28
1.05
55
+4
37.68
29.83
20.90
16.00
12.88
10.75
9.21
8.03
7.11
6.38
5.78
4.85
4.16
3.63
3.23
2.90
2.28
1.88
1.65
1.36
1.06
52
100
200
300
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
2500
3000
3400
4000
5000
6000
7000
8000
47
41
36
32
24
19
39
17
34
13
28
46
10
21
35
7
16
28
5
13
23
44
4
11
20
37
Recharge
Hours
3
7
10
17
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3: USER CONFIGURABLE ITEMS
NOTE: SETTINGS ARE MADE THROUGH THE SUPPLIED POWERCHUTE BUSINESS EDITION SOFTWARE, NETWORK
MANAGEMENT CARD, OR TERMINAL MODE. REFER TO THE SOFTWARE HELP GUIDES FOR DETAILS.
FACTORY
DEFAULT
USER SELECTABLE
CHOICES
FUNCTION
DESCRIPTION
Automatic Self-Test
Every 14 days
(336 hours)
Every 7 days
(168 hours),
Every 14 days
(336 hours),
This function sets the interval at which
the uninterruptible power supply will
execute a self-test.
On Startup Only,
No Self-Test
Uninterruptible
Power Supply ID
UPS_IDEN
Up to eight characters Use this field to uniquely identify the
uninterruptible power supply, (i.e.
server name or location) for network
management purposes.
Date of Last Battery
Replacement
Manufacture Date
0 percent
mm/dd/yy
Reset this date when you replace the
battery modules.
Minimum Capacity
Before Return from
Shutdown
0, 15, 25, 35, 50, 60,
75, 90 percent
The uninterruptible power supply will
charge its batteries to the specified
percentage before it powers up con-
nected equipment, following a low-
battery shutdown.
Alarm Delay After
Line Failure
5 second delay
20 seconds
2 minutes
5 second delay,
30 second delay,
At Low Battery,
Never
The user can mute an ongoing alarm or
disable all existing alarms permanently.
Shutdown Delay
0, 20, 60, 120, 240,
480, 720, 960 sec-
onds
The interval is set between the times
when the uninterruptible power supply
receives a shutdown command and
actual shutdown.
Duration of Low
Battery Warning
2, 5, 7, 10, 12, 15, 18, The low battery warning beeps become
20 minutes
continuous when two minutes of run-
time remain.
(PowerChute soft-
ware provides
automatic, unat-
tended shutdown
when approxi-
Change the warning interval to a higher
setting if the operating system requires
a longer interval for shutdown.
mately two min-
utes of battery
runtime remain.)
Synchronized Turn-
on Delay
0 seconds
0, 20, 60, 120, 240,
480, 720, 960 sec-
onds
The uninterruptible power supply will
wait the specified time after the return
of utility power before turn-on (to
avoid branch circuit overload).
High Bypass Point
Low Bypass Point
Output Voltage
+10% of output
voltage setting
+5%, +10%, +15%,
+20%
The uninterruptible power supply will
pass this maximum voltage to con-
nected equipment during internal by-
pass operation.
-30% of output
voltage setting
-15%, -20%, -25%,
-30%
The uninterruptible power supply will
pass this minimum voltage to con-
nected equipment during internal by-
pass operation.
230 Vac
200, 208, 220, 230,
240 Vac
The user is able to select the uninter-
ruptible power supply output voltage
while online. Use the voltage setting
applicable to your region.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: SETTINGS ARE MADE THROUGH THE SUPPLIED POWERCHUTE BUSINESS EDITION SOFTWARE, NETWORK
MANAGEMENT CARD, OR TERMINAL MODE. REFER TO THE SOFTWARE HELP GUIDES FOR DETAILS.
FACTORY
DEFAULT
USER SELECTABLE
CHOICES
FUNCTION
DESCRIPTION
Output Frequency
Automatic
Automatic,
50 ± 3 Hz,
50 ± 0.1 Hz,
60 ± 3 Hz,
60 ± 0.1 Hz
The user is able to set the allowable
uninterruptible power supply output
frequency. Whenever possible, the
output frequency tracks the input fre-
quency.
(50 ± 3 Hz or
60 ± 3 Hz)
Number of Battery
Packs
1
Number of Con-
nected Battery Packs
The user can define the number of con-
nected battery packs for proper runtime
(four battery modules prediction.
per pack)
Emergency Power Off (EPO) Option
The output power can be disabled in an emergency by closing a switch connected to the EPO.
Note: Adhere to national and local electrical codes when wiring.
The switch should be connected in a normally open switch contact. External voltage is not required; the switch is powered by a
12 V internal power supply. A closed switch draws 2 mA of current.
The EPO switch is internally powered by the uninterruptible power supply for use with non-powered switch circuit breakers.
Note: The EPO circuit is considered a Class 2 circuit, (UL, CSA standards) and an SELV circuit (IEC standard).
EPO
Switch
Both Class 2 and SELV circuits must be isolated from all primary circuitry. Do not connect any circuit to the EPO terminal
block unless it can be confirmed that the circuit is Class 2 or SELV.
If the circuit standard cannot be confirmed, use a contact closure switch.
Use one of the following cable types to connect the uninterruptible power supply to the EPO switch:
•
•
•
•
•
•
CL2: Class 2 cable for general use
CL2P: Plenum cable for use in ducts, plenums, and other spaces used for environmental air
CL2R: Riser cable for use in a vertical run in a floor-to-floor shaft
CLEX: Limited use cable for use in dwellings and for use in raceways
For installation in Canada: Use only CSA certified, type ELC (extra-low voltage control cable)
For installation in other countries: Use a standard low-voltage cable according to local regulations
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4: STORAGE, MAINTENANCE, SHIPPING, AND SERVICE
Storage
Store the uninterruptible power supply covered in a cool, dry location, with the batteries fully charged.
At -15 to +30 °C (+5 to +86 °F), charge the uninterruptible power supply battery every six months.
At +30 to +45 °C (+86 to +113 °F), charge the uninterruptible power supply battery every three months.
Replacing the Battery Modules
Attention:
•
Upon battery disconnection, connected equipment is not protected from power outages.
Use caution when handling heavy battery modules.
•
The uninterruptible power supply battery life differs based on usage and environment.
This uninterruptible power supply has easy to replace, hot-swappable battery modules. Replacement is a safe procedure, isolated
from electrical hazards. You can leave the uninterruptible power supply and connected equipment turned on for the replacement
procedure.
Contact your IBM marketing representative or authorized reseller for information about replacement battery modules.
Refer to Removing the Battery Modules for removal instructions. For battery replacement, see Installing and Connecting the
Batteries and Attaching the Front Battery Bezel.
This product contains sealed lead acid batteries. The battery modules must be recycled or disposed of properly. IBM has estab-
lished a collection process for reuse, recycling, or proper disposal of used IBM sealed lead acid battery modules. For informa-
tion on proper disposal of these modules, please contact IBM at 1-800-426-4333. Please have the model number listed on the
uninterruptible power supply available before you call.
For information about the disposal of sealed lead acid batteries outside of the United States, contact your local IBM service or-
ganization.
Replacing the Network Management Card
Refer to the Network Management Card CD for removal and replacement procedures.
Shipping and Service
Prepare the uninterruptible power supply for shipping:
Shut down and disconnect any equipment attached to the uninterruptible power supply. Shut down the uninterruptible power
supply, and disconnect the uninterruptible power supply from the utility power outlet. Remove the front bezel and disconnect
the batteries.
If the uninterruptible power supply requires service, do not return it to the dealer. Follow these steps:
1. Review the problems discussed in Troubleshooting to eliminate common problems.
2. If the problem persists, contact IBM.
$
Note the model number of the uninterruptible power supply, the serial number, and the date purchased. If you call IBM
Customer Service, a technician will ask you to describe the problem and attempt to solve it over the phone, if possible.
If the uninterruptible power supply or one of its components is faulty, IBM will send you a replacement CRU for the un-
interruptible power supply or the component.
$
If the uninterruptible power supply or the component is under warranty, repairs are free. If not, there is a repair charge.
3. Pack the uninterruptible power supply or the faulty component in packaging sent by IBM, and use the return label to ship
back to IBM. Pack the uninterruptible power supply properly to avoid damage in transit. Never use Styrofoam beads for
packaging. Damage sustained in transit is not covered under warranty.
Attention: Always disconnect the battery before shipping. The battery modules may remain in the uninterruptible power
supply; they do not have to be removed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5: HARDWARE MAINTENANCE INFORMATION
This chapter contains information about IBM customer replaceable unit (CRU) availability for the UPS 7500XHV and UPS
10000XHV models.
Customer Replaceable Unit Part Numbers
IBM CRU part numbers are subject to change without notice. This section contains a listing of the CRU part numbers available
at the time this document was published.
INDEX
CRU PART #
25R5591
DESCRIPTION
1
2
Replacement Battery Module
Serial Cable
73P5767
3
4
5
6
7
8
25R5596
73P5769
25R5600
25R5597
25R5599
25R5589
25R5590
25R5592
25R5593
25R5594
25R5595
Serial to USB Adapter Cable
Rail Kit
Accessory Kit
Rack-to-Tower Conversion Kit
Network Management Card and Temperature Probe
UPS 7500XHV Chassis
UPS 10000XHV Chassis
UPS 7500XHV Display Bezel
UPS 10000XHV Display Bezel
Front Bezel
9
10
11
Battery Bezel
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6: TROUBLESHOOTING
Use the chart below to solve minor uninterruptible power supply installation and operation problems. Refer to IBM for assis-
tance with complex uninterruptible power supply problems.
PROBLEM AND POSSIBLE
CAUSE
SOLUTION
UNINTERRUPTIBLE POWER SUPPLY WILL NOT TURN ON
The uninterruptible power
supply is not connected to the
utility power supply.
Check that the power cord from the uninterruptible power supply to the util-
ity power supply is securely connected at both ends.
The batteries are not con-
nected properly.
Check that the battery connectors are fully engaged.
There is very low or no utility
voltage.
Check the utility power supply to the uninterruptible power supply by plug-
ging in a table lamp. If the light is very dim, have the utility voltage
checked.
UNINTERRUPTIBLE POWER SUPPLY WILL NOT TURN OFF
There is an internal uninter-
ruptible power supply fault.
Do not attempt to use the uninterruptible power supply. Unplug the uninter-
ruptible power supply and have it serviced immediately.
UNINTERRUPTIBLE POWER SUPPLY BEEPS OCCASIONALLY
The uninterruptible power
None. The uninterruptible power supply is protecting the connected equip-
supply beeps when running on ment from occasional utility power irregularities.
battery during normal opera-
tion.
UNINTERRUPTIBLE POWER SUPPLY IS NOT PROVIDING EXPECTED BACKUP TIME
The uninterruptible power
supply battery is weak due to
a recent outage or is near the
end of its service life.
Charge the battery. Batteries require recharging after extended outages, and
wear faster when frequently put into service or when operated at elevated
temperatures. If the battery is near the end of the service life, consider re-
placing the battery even if the replace battery LED is not yet lit.
ALL LEDS ARE LIT AND THE UNINTERRUPTIBLE POWER SUPPLY EMITS A CONSTANT BEEPING
There is an internal uninter-
ruptible power supply fault.
Do not attempt to use the uninterruptible power supply. Turn off the uninter-
ruptible power supply and have it serviced immediately.
FRONT PANEL LEDS FLASH SEQUENTIALLY
The uninterruptible power
supply has been shut down
remotely through software.
None. The uninterruptible power supply will restart automatically when
utility power returns.
ALL LEDS ARE OFF AND THE UNINTERRUPTIBLE POWER SUPPLY IS PLUGGED INTO A WALL OUTLET
The uninterruptible power
supply is shut down or the
battery is discharged from an
extended outage.
None. The uninterruptible power supply will return to normal operation
when the power is restored and the battery has a sufficient charge.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM AND POSSIBLE
CAUSE
SOLUTION
BYPASS AND OVERLOAD LEDS ARE LIT; UNINTERRUPTIBLE POWER SUPPLY EMITS A SUSTAINED
ALARM TONE
The uninterruptible power sup- The connected equipment exceeds the specified maximum load.
ply is overloaded. The con-
nected equipment is drawing
more VA or more watts than
the uninterruptible power sup-
The alarm remains on until the overload is removed. Disconnect nonessen-
tial equipment from the uninterruptible power supply to eliminate the over-
load.
The uninterruptible power supply continues to supply power as long as it is
online and the circuit breaker does not trip; the uninterruptible power sup-
ply will not provide power from batteries in the event of a utility voltage
interruption.
ply can sustain.
If a continuous overload occurs while the uninterruptible power supply is
on battery, the unit turns off output in order to protect the uninterruptible
power supply from possible damage.
BYPASS LED IS LIT
The bypass switch has been
turned on manually.
If bypass is the chosen mode of operation, ignore the lit LED.
If bypass is not the chosen mode of operation, move the bypass switch on
the back of the uninterruptible power supply to the normal position.
FAULT AND OVERLOAD LEDS ARE LIT; UNINTERRUPTIBLE POWER SUPPLY EMITS A SUSTAINED
ALARM TONE
The uninterruptible power sup- The connected equipment exceeds the specified maximum load.
ply has stopped sending power
to connected equipment.
Disconnect nonessential equipment from the uninterruptible power supply
to eliminate the overload condition.
Press the off button, then the on button to restore power to connected equip-
ment.
FAULT LED LIT
There is an internal uninterrup- Do not attempt to use the uninterruptible power supply. Turn off the unit
tible power supply fault.
and have it serviced immediately.
REPLACE BATTERY LED IS LIT
The replace battery LED
flashes and a short beep is
emitted every two seconds to
indicate the battery is discon-
nected.
Check that the battery connectors are fully engaged.
The battery is weak.
Allow the battery to recharge for 24 hours. Then, perform a self-test. If the
problem persists after recharging, replace the battery.
A battery self-test has failed.
The uninterruptible power supply emits short beeps for one minute and the
replace battery LED is lit. The uninterruptible power supply repeats the
alarm every five hours. Perform the self-test procedure after the battery has
charged for 24 hours to confirm the replace battery condition. The alarm
stops and the LED clears if the battery passes the self-test.
UNINTERRUPTIBLE POWER SUPPLY OPERATES ON BATTERY ALTHOUGH NORMAL LINE VOLTAGE
EXISTS
There is very high, low, or
distorted line voltage.
Move the uninterruptible power supply to a different outlet on a different
circuit. Inexpensive fuel powered generators might distort the voltage. Test
the input voltage with the utility voltage display. See Operation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7: GETTING HELP AND TECHNICAL ASSISTANCE
If you need help, service, or technical assistance or just want more information about IBM products, you will find a wide variety
of sources available from IBM to assist you. This chapter contains information about where to go for additional information
about IBM and IBM products, what to do if you experience a problem with your xSeries or IntelliStation system, and whom to
call for service, if it is necessary.
Before you call
Before you call, make sure that you have taken these steps to try to solve the problem yourself:
•
•
•
Check all cables to make sure they are connected.
Check the power switches to make sure that the system is turned on.
Use the troubleshooting information in your system documentation, and use diagnostic tools that
come with your system.
•
tion, hints, tips, and new device drivers.
You can solve many problems without outside assistance by following the troubleshooting procedures
that IBM provides in the online help or in the publications that are provided with your system and soft-
ware. The information that comes with your system also describes the diagnostic tests that you can per-
form. Most xSeries and IntelliStation systems, operating systems, and programs come with information
that contains troubleshooting procedures and explanations of error messages and error codes. If you sus-
pect a software problem, see the information for the operating system or program.
Using the Documentation
Information about your IBM xSeries or IntelliStation system and preinstalled software, if any, is avail-
able in the documentation that comes with your system. That documentation includes printed books,
online books, readme files, and help files. See the troubleshooting information in your system documen-
tation for instructions for using the diagnostic programs. The troubleshooting information or the diagnos-
tic programs might tell you that you need additional or updated device drivers or other software. IBM
maintains pages on the World Wide Web where you can get the latest technical information and
download device drivers and updates. To access these pages, go to http://www.ibm.com/pc/support/ and
follow the instructions. Also, you can order publications through the IBM Publications Ordering System
Getting help and information from the World Wide Web
On the World Wide Web, the IBM Web site has up-to-date information about IBM xSeries and
IntelliStation products, services, and support. The address for IBM xSeries information is
You can find service information for your IBM products, including supported options, at
Software service and support
Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and
software problems with xSeries servers, IntelliStation workstations, and appliances. For information
about which products are supported by Support Line in your country or region, go to
800-IBM-SERV (1-800-426-7378).
Hardware service and support
You can receive hardware service through IBM Integrated Technology Services or through your IBM
reseller, if your reseller is authorized by IBM to provide warranty service. Go to
http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S. and Canada, call 1-800-
IBM-SERV (1-800-426-7378).
In the U.S. and Canada, hardware service and support is available 24 hours a day, 7 days a week. In the
U.K., these services are available Monday through Friday, from 9 a.m. to 6 p.m.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement part handling
If the issue cannot be resolved through any of the aforementioned steps, you will be sent a replacement
part. Pack the uninterruptible power supply or the faulty component in packaging sent by IBM, and use
the return label to ship back to IBM. Pack the uninterruptible power supply properly to avoid damage in
transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under war-
ranty.
Attention: Always disconnect the battery before shipping. The battery can remain in the uninterruptible
power supply; it does not have to be removed.
Complete the following steps.
1. Shut down and disconnect any equipment attached to the uninterruptible power supply.
2. Shut down the uninterruptible power supply, and disconnect the uninterruptible power supply input
cord from the utility.
3. Disconnect the battery connectors.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
8: NOTICES, TRADEMARKS, AND RADIO FREQUENCY WARNINGS
Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries.
Consult your local IBM representative for information on the products and services currently available in
your area. Any reference to an IBM product, program, or service is not intended to state or imply that
only that IBM product, program, or service may be used. Any functionally equivalent product, program,
or service that does not infringe any IBM intellectual property right may be used instead. However, it is
the user’s responsibility to evaluate and verify the operation of any non- IBM product, program, or
service.
IBM may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not
apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not
in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part
of the materials for this IBM product, and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Attention! Life Support
American Power Conversion (APC) Corporation and International Business Machines (IBM) Corpora-
tion, their affiliates and subsidiaries world-wide, do not recommend the use of any of their products in
life support applications where failure or malfunction of the product can be reasonably expected to cause
failure of the life support device or to significantly affect its safety or effectiveness. APC and IBM do
not permit the use of any of their products in direct patient care. APC and IBM will not knowingly sell
their products for use in such applications.
Examples of devices considered to be life support devices include, but are not limited to, neonatal oxy-
gen analysers, nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotrans-
fusion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers, hemodialysis
systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators for both adults and in-
fants, anesthesia ventilators, infusion pumps, and any other device designated as “critical” by the
U.S.F.D.A.
Hospital grade wiring devices and reduced leakage currents that meet medical safety standards may be
ordered as options on many uninterruptible power supply systems. APC and IBM do not claim that units
with these modifications are certified or listed as such by APC, IBM or any other organizations, there-
fore these units do not meet the requirements for use in direct patient care.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Edition Notice
Second Edition (February 2005)
© Copyright International Business Machines Corporation 2004, 2005. All rights reserved.
U.S. Government Users Restricted Rights — Use, duplication, or disclosure restricted by GSA ADP
Schedule Contract with IBM Corp.
Trademarks
IBM, Intellistation, and xSeries are trademarks of International Business Machines Corporation in the
United States, other countries, or both.
APC, Smart-UPS, and PowerChute are registered trademarks of American Power Conversion Corpora-
tion. Other company, product, or service names may be the trademarks or service marks of others.
Important notes
IBM makes no representation or warranties regarding non-IBM products and services that are Server-
Proven, including but not limited to the implied warranties of merchantability and fitness for a particular
purpose. These products are offered and warranted solely by third parties.
IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the
non-IBM products is provided by the third party, not IBM.
Some software may differ from its retail version (if available), and may not include user manuals or all
program functionality.
Product recycling and disposal
This unit contains materials such as circuit boards, cables, electromagnetic compatibility gaskets, and
connectors which may contain lead and copper/beryllium alloys that require special handling and
disposal at end of life. Before this unit is disposed of, these materials must be removed and recycled or
discarded according to applicable regulations. IBM offers product-return programs in several countries.
Information on product recycling offerings can be found on IBM’s Internet site at
Battery return program
This product may contain a sealed lead acid, nickel cadmium, nickel metal hydride, lithium, or lithium
ion battery. Consult your user manual or service manual for specific battery information. The battery
must be recycled or disposed of properly. Recycling facilities may not be available in your area. For
information on disposal of batteries outside the United States, go to
disposal facility.
In the United States, IBM has established a collection process for reuse, recycling, or proper disposal of
used IBM sealed lead acid, nickel cadmium, nickel metal hydride, and battery packs from IBM
equipment. For information on proper disposal of these batteries, contact IBM at 1-800-426-4333. Have
the IBM part number listed on the battery available prior to your call.
In the Netherlands, the following applies.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic emission notices
Federal Communications Commission (FCC) Statement
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits.IBM is not responsible for any radio or television interference causedby using other than
recommended cables and connectors or by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
Industry Canada Class A emission compliance statement
This Class A digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d'Industrie Canada.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Australia and New Zealand Class A statement
Attention: This is a Class A product. In a domestic environment this product may cause radio interfer-
ence in which case the user may be required to take adequate measures.
United Kingdom telecommunications safety requirement
Notice to Customers
This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connection to pub-
lic telecommunication systems in the United Kingdom.
European Union EMC Directive conformance statement
This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on
the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM can-
not accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product, including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class A Information Technology
Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment
were derived for commercial and industrial environments to provide reasonable protection against inter-
ference with licensed communication equipment.
Attention: This is a Class A product. In a domestic environment this product may cause radio interfer-
ence in which case the user may be required to take adequate measures.
Argentina IRAM certification requirement
This product meets IRAM certification requirements.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Taiwan electronic emission statement
Note: For the purpose of BSMI certification clarity, IBM UPS 7500XHV, 2130-6RX, and 25R5583 are
identical, and IBM UPS 10000XHV, 2130-8RX and 25R5584 are identical.
Chinese Class A warning statement
Statement of Conformity to the Voluntary Control Council for Interference from Informa-
tion
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|