Hyundai Flat Panel Television HQP421HR User Manual
Hyundai  
Plasma Display  
USA  
Hyundai ImageQuest America  
3101 North First Street San Jose, CA 95134  
Hyundai tech support  
HQP421SR/421HR/501HR  
Tel : +800-568-0061,408-232-8654  
Fax : +408- 232-8146  
e-mail : syuen@hyundaiqa.com  
User’s Guide  
AVC USA. INC.  
777 Mark Street, Wood Dale, IL 60191  
Tel : 630-595-0123 / 800-568-0060  
Fax : 630-595-2345 / 800-784-9422  
e-mail : avctech@avcusa.com  
NEW ZEALAND  
TRANSTECH DISTRIBUTORS Ltd.  
PO Box 12985 Penrose,  
Auckland New Zealand  
Tel : 09-571-0775  
Fax : 09-571-0776  
e-mail : LouisG@Transtech.co.nz  
WWW : www.transtech.co.nz  
AUSTRALIA  
Thomas Electronics Australia Pty Ltd.  
3 Sheridan Close  
Milperra NSW 2214, Australia  
Tel : +61 2 9773 7400  
Fax : 61 2 9773 7177  
Attn : Ms. Shiely Poniman  
GERMANY  
Hyundai ImageQuest Europe GmbH  
Geheimrat Hummel Platz 2  
65239, Hochheim, Germany  
Tel : 06146 / 904 444  
Fax : 06146 / 904 410  
e-mail : service@hyundaiq.de  
WWW : www.hyundaiq.com  
JAPAN  
Hyundai ImageQuest JAPAN  
Shin-Hibiya Bldg, East 5F 1-3-6  
Uchisaiwai-Cho, Chiyoda-ku,  
Tokyo, Japan 100-0011  
Tel : 03-5157-2286  
Fax : 03-5157-2284  
e-mail : pjkim@iqt.co.kr  
C/S P.J.Kim  
* The above image may look different from the real product.  
P/N 632 0238 202 Rev.02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Information  
User Instructions  
The Federal Communications Commission Radio Frequency Interference Statement includes the  
following warning :  
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device  
pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television receptions, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures :  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV technician for assistance.  
User Information  
Changes or modifications not expressly approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Connecting of peripherals requires the use of grounded shielded signal cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
DECLARATION OF CONFORMITY  
WE  
HYUNDAI ImageQuest CO., LTD.  
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do  
467-860 KOREA  
declare under our sole responsibility that the product:  
Kind of equipment : PDP TV  
Type-Designation : PT42AS000 / PT42AH000 / HQP50AH000  
to which this declaration relates is in conformity with the  
following standard(s) or other normative document(s)  
Safety  
EMC  
:
:
EN 60065 : 1998 / IEC60065 : 1998  
EN 55022 : 1998+A1 : 2000 Class B  
EN 55024 : 1998+A1 : 2001  
EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1 : 2001  
following the provisions of the Low Voltage Directive 73/23/EEC,  
93/68/EEC and the EMC Directive 89/336/EEC.  
Accredited testlaboratory:  
TÜV Rheinland  
Am Grauen Stein  
51105 Köln  
KOREA /MAY. 15, 2004  
Place and date of issue)  
HONG KI, KIM  
(Name and signature of  
authorized person)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Tips  
Image Retention effect(Image Sticking)  
1. Cause :  
- Image Retention Effect could be come from displaying a still picture in certain period of time with at  
a certain area continuously, as the feature of Plasma Display Panel.  
- This is the same matters to other companies' PDP products, too.  
2. Preventation :  
- To avoid this matter, use the product after reducing brightness and contrast, especially a still image  
is displaying for a long time. (Example : Contrast 50, Brightness 50 - See the page 36)  
Once Image retention occurs, change the mode into Video mode which displays more motion  
pictures. It will help reduce this matter, but cannot completely eliminate once it occurs.  
It makes the screen’s brightness worse as displaying a fixed pattern often.  
- Use the fuction, Pixel Shift in still image, in our PDP products.  
(For more details, see the below page 65)  
3. Solution :  
- The temporary image sticking would decrease with displaying Full-White pattern after 10 hours.  
- The permanent image sticking couldn’t take off under the latest technology even though being in its  
manufacturer.  
4. Notice :  
- It is very important to notify every buyer/customer this information and All Branches/Buyers  
/Customers should be fully aware of this.  
- Image Sticking in PDP products couldn’t get the support from a manufacturer, and does not come  
under the warranty.  
Second Tip  
• Pixel Defect :  
Plasma Display Panel(PDP) is made of a group of refined pixels (cells). The Panel, in which 99.9% of  
pixels have approved, is a normal product. Therefore, only a few of abnormal pixels may appear,  
however, this has no influence upon PDP performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Image Sticking Precaution  
Still Image/Panorama/Wide/4:3 in motion Image  
Panorama, Wide, 4:3 aspect ratio  
Box or Still image  
• Precaution :  
- Image Sticking could be come from Still Image and Boundary line for a long time display and  
Brightness gap in Boundary.  
- This Matter(Image Sticking) is same thing under the other PDP's Company.  
- Still Image/Letter in watching TV also will be effect to Image sticking.  
*This matter(Image Sticking) is out of warranty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
A Wide Array of Screen Settings  
You can choose different screen settings depending on the type of program you are watching or the  
surrounding conditions (the lighting or the outside weather conditions).  
You can switch among Standard, Dynamic, Movie and Mild options or you can configure the screen settings for  
yourself.  
A Wide Array of Sound Settings  
You can choose an optimal sound setting for the type of program you are watching.  
You can switch among Music, Movie, News and Standard options or you can configure the settings for yourself.  
SRS WOW(Surround) Audio Function  
You can listen to dynamic and surround sound only with ordinary speakers.  
Two Tuner Built-In  
You can watch two channels at the same time and changing each channel.  
PIP Viewing  
You can watch TV or Text information at the same time while working on PC or watching VCR/DVD movies.  
Various of the Aspect Ratio  
You can adjust aspect Ratio as you want.  
Auto On/Off Function  
This fuction allows you to turn On/Off your PDP TV at the preset Time.  
If there is no signal during a specific time period, power will be off.  
Auto Detection Sound Format  
When watching TV in Stereo/SAP mode, this function automatically detects transmission signaling to display  
broadcasting status on the OSD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Table of Contents  
General Information  
Sound Setup  
Important Tips ......................................................................3  
Image Sticking Precaution ....................................................4  
Safety Precaution .................................................................5  
Contents of the Package .....................................................11  
Separately Sold Products ....................................................11  
Parts Names and Functions ................................................13  
Remote Control ...................................................................15  
How To Use Speakers (Standing Type) ...............................17  
How To Use Speakers (Desk Type) ......................................18  
How To Install Wall Hanger Support ....................................19  
How To Install Wall mount frame ........................................20  
How To Install Desktop Stand .............................................21  
How to Select the Audio Mode ............................................47  
How to Set the Desired Audio .............................................48  
How to Select AVL ..............................................................49  
How to Select SRS WOW(Surround) ....................................50  
How to Select MTS(Multi-Channel Sound) ...........................51  
How to Set the Output of Subwoofer ...................................52  
Channel Setup  
Memorizing the Channels ...................................................55  
Fine Tuning Channel Reception ...........................................56  
Storing Channels Manually .................................................57  
Using the LNA(Low-Noise-Amplifier) Feature ......................58  
Connections  
Function Setup  
Connecting VHF and UHF Antenna........................................23  
Connecting Cable TV ...........................................................23  
Before connecting the video/audio connections to  
How to Select the Aspect Ratio ...........................................61  
Displaying Information ........................................................63  
How to Set Key-Lock ..........................................................64  
Using the Pixel Shift / Full White / Wiper Function ...............65  
How to Freeze Picture .........................................................66  
How to Set DPMS ...............................................................67  
Choosing the Your Languages .............................................68  
How to Set Image Adjust in PC Mode ..................................69  
Viewing Closed Captions .....................................................71  
Using the V-Chip .................................................................73  
external devices ................................................................25  
Connecting a VCR, Cable/Satellite Receiver .........................26  
Connecting a DVD Player ....................................................27  
Connecting a DTV(Digital Broadcast) Receiver .....................28  
Playing Back a Tape Recorded On a Camcorder ..................29  
Connecting to a PC(DVI, D-SUB) .........................................30  
Resolutions Supported in PC ...............................................31  
Scart Connection to the External Input ................................32  
Clock Setup  
Picture Setup  
How to Set Clock ................................................................77  
How to Set On Time ............................................................78  
How to Set Off Time ............................................................80  
How to Set Sleep Time .......................................................82  
How to Select the Picture Mode ..........................................35  
How to Set the Desired Picture ...........................................36  
How to Set Blue Screen ......................................................37  
How to Set Film Mode .........................................................38  
How to Select a Color Temperature .....................................39  
How to Set PIP [Mode] ........................................................40  
How to Set Multi-Screen [Input Source/Position/Size] .........41  
Supported PIP Table ...........................................................43  
How to Set Noise Reduction ............................................... 44  
How to Select the Fit(Fine Image Technology) Engine Mode ...45  
Appendix  
Glossary ............................................................................ 85  
Troubleshooting ................................................................. 87  
Care and Cleaning ............................................................. 89  
Product Specifications ....................................................... 90  
Component Video Signal Format ........................................ 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precaution  
The contents of this section are provided for the safety of users and their property.  
Please read the instructions carefully before using.  
WARNING  
If there is a persistent accumulation  
of dusts or water on the plug, please  
make sure to wipe it off using a dry  
cloth.  
- It may cause a fire or an electric shock.  
Do not connect multiple electrical  
appliances to a single outlet.  
- It may cause a fire due to overheating from the  
outlet.  
WARNING  
Do not install in a place where there  
is oil, smoke, excessive humidity, or  
where water may be sprinkled,  
dripped, splashed on it.  
- This may cause electric shock or fire.  
Do not put a water bowl, filled with  
liquids such as vases, candle, bug  
repellant smoke, cigarette, plants,  
or heavy thing on the PDP.  
- It may cause electric shock or fire and also  
heavy things may cause injury when they fall.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.  
This icon is intended to alert the user to the presence of potential danger and important operating instructions.  
WARNING : When there is a possibility of serious injury or death if not observed.  
ALERT : When there is a possibility of slight injury or product damage if not observed.  
Do not use a damaged power cord  
or plug, or loose outlet.  
- They may cause electric shock or fire.  
Firmly plug in the power cord so that  
Never touch the power plug or  
it does not pull out.  
- An unstable connection may cause fire.  
outlet with wet hands.  
- This may cause electric shock.  
Do not use or store a flammable  
spray or inflammable things near the  
PDP.  
- They may cause explosion or fire.  
Do not install the PDP in a  
Do not install on an unstable place  
bookshelf, closet, or a place where  
or small support.  
- This may cause the PDP to fall, resulting in  
serious injury to a child or adult.  
there is poor air circulation.  
- Fire may be caused due to the rise of internal  
temperature.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precaution ......................................Continued from previous page  
The contents of this section are provided for the safety of users and their property.  
Please read the instructions carefully before using.  
WARNING  
Never attempt to open, fix, or modify  
the PDP.  
- When there is a need for fixing, call a service  
center. Fire or electric shock may be caused.  
Make the antenna cable loop at the entrance  
of the building Any necessary action such as  
making the antenna cable loop at the  
entrance of the building should be taken to  
prevent rainwater on the outdoor antenna  
cable from possibly running into the indoor.  
- If raindrop gets into the PDP, it may cause a fire  
or an electric shock.  
WARNING  
Do not block ventilating slits.  
- Blocking the ventilation slits prevents inner heat  
from escaping, which may lead to a fire.  
Any heat sources such as radiators  
and heat registers, etc. on or near  
the PDP.  
- It may cause a fire.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.  
This icon is intended to alert the user to the presence of potential danger and important operating instructions.  
WARNING : When there is a possibility of serious injury or death if not observed.  
ALERT : When there is a possibility of slight injury or product damage if not observed.  
When the PDP produces abnormal  
noise, burning smell, or smoke,  
unplug the PDP immediately and call  
a service center.  
- Electric shock or fire may be caused.  
Do not put a metallic object like  
chopstick, wire, or puncher or  
inflammables like paper or a match  
in a vent, headphone jack, or AV  
jacks of the PDP.  
When moving the PDP assembled  
with speakers, make sure to detach  
the speakers from it.  
- If you carry the product holding the speakers, it  
may cause the product to fall, causing serious  
injury or damage.  
- Electric shock or fire may be caused.  
Unplug the product during lightning  
or thunderstorms and never touch  
the antenna cable.  
- It may cause a fire or an electric shock.  
Keep the remote control batteries  
out of sight and out reach of  
Do not install the product on the  
children.  
- If your child swallows a battery, see your doctor  
immediately.  
floor.  
- If it falls over, your child may be injured.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precaution ......................................Continued from previous page  
The contents of this section are provided for the safety of users and their property.  
Please read the instructions carefully before using.  
WARNING  
Do not place toys and cookies, etc.  
on the PDP, which may attract  
children’s attention. Children will  
climb on the PDP to reach whatever  
they have their eyes on.  
- If it falls over on children, it may cause serious  
injury.  
Do not allow children to climb or  
play on the PDP.  
- If it falls over on children, it may cause serious  
injury.  
ALERT  
Please avoid touching the panel at  
the rear of PDP as it is producing  
high temperature.  
- Direct contact with the hot surface may cause  
physical burns.  
In the event of damaging or  
dropping the product, switch off the  
power and remove the plug.  
- Using a damaged product may cause an electric  
shock or a fire.  
- Contact your local service center.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.  
This icon is intended to alert the user to the presence of potential danger and important operating instructions.  
WARNING : When there is a possibility of serious injury or death if not observed.  
ALERT : When there is a possibility of slight injury or product damage if not observed.  
When replacing batteries, make  
sure to match the batteries to the  
(+) and (-) marks in the battery  
compartment.  
Alcohol  
LUBRICANT  
- Mismatching of polarities may result in internal  
Benzene  
damage to batteries, fire due to leakage or  
contamination.  
When cleaning the PDP, make sure to  
disconnect the power plug and use a  
Always use the standard batteries  
dry, soft cloth for a cleanup.  
- Please avoid using chemicals such as wax,  
benzene, alcohol, thinner, mosquito spray,  
air freshener, lubricant or synthetic  
detergent.  
and avoid using old batteries  
together with new ones.  
- Otherwise it may result in internal damage to  
batteries, fire due to leakage or contamination.  
When moving the PDP, 2 or more  
people are advised to carry it.  
- Injury or damage may be caused when the PDP  
falls.  
Unplug when you do not use your  
PDP for a long time.  
Consult a service center or customer  
service for inside cleaning about  
- If dust is stacked on the PDP, electric shock or  
fire may be caused from heat, fire, or  
deterioration of insulation.  
once a year.  
- When dust is piled inside the PDP for long time,  
fire or malfunction may be caused.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents of the Package  
To purchase additional parts, consult a distributor or selling agent.  
MUTE  
PREVIEW  
ILL  
ST  
ASPECT  
PICTURE  
SOUND  
CHANNEL  
TS  
E
M
AP  
SW  
UK  
Japan  
Europe  
VOLUM  
SIZE  
LEEP  
S
SOURCE  
FF  
N/O  
O
IP  
P
U
N
E
M
V
/A  
V
T
N
IO  
T
P
A
C
T
O
U
A
C.  
E
P
R
T
O
N
O
F
T
IO  
IN  
F
S
T
E
C
O
LO  
R
P
T
/F  
E
G
LIS  
P
A
O
W
B
/L  
U
H
S
IG  
E
X
H
D
IN  
A
L
V
E
E
R
IX  
/M  
X
T
T
E
IZ  
D
S
L
H
O
Power Cord  
America/Canada  
Remote Control/2 Batteries  
(1.5V AAA)  
South Africa  
Australia  
User’s Guide  
Antenna Cable  
Korea  
Separately Sold Products  
If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.  
Desk type speaker  
stand  
Desk type stand  
Desk type speaker  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Wall mounting frame  
Adjustable wall mounting frame  
Ceil mounting frame  
DVI PC video(digital) cable  
Component(Y, Pb, Pr) cable  
Composite(Video & Audio) cable  
S-video cable  
PC signal cable  
Scart cable  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Names and Functions  
Front View  
* The above image may look different from the real product.  
Power button  
Source button  
Use this button to turn on or off the PDP.  
Use this button to switch among inputs  
connected to the PDP.  
Volume buttons  
Use these buttons for your desired sound level.  
These buttons also serve as the cursor of  
Select/Adjust when in Menu mode.  
Menu button  
Use this button to display or exit from menus.  
Remote sensor and power LED  
Point the remote control toward here.  
It displays standby or operation status.  
Channel buttons  
Use these buttons to change channels. These  
buttons also serve as the cursor of Down and  
Up buttons when in Menu mode.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Rear View  
terminal  
Connect to the audio output  
terminal of a PC.  
D-SUB input terminal  
Connect to the DTV  
Receiver with D-Sub  
terminal or to RGB output  
terminal of a PC.  
Audio input terminal for  
DVD  
Connect to the audio output  
terminal of DVD player.  
Component input terminal  
for DVD or DTV  
Connect to the Component  
output terminal of DVD  
player/DTV receiver.  
Audio input terminal for  
DTV Component  
Connect to the audio output  
terminal of DTV receiver.  
Component input terminal  
for DTV  
Sub woofer output  
If you wish to reproduce  
the lower bass frequencies,  
please connect the cable to  
your Subwoofer speaker  
with *AMP.  
RS-232 input terminal  
Connect to the RS-232  
terminal of a PC for the  
service check.  
*For the control method  
using this terminal, consult  
an authorized PDP monitor  
dealer.  
Phone Jack(RS-232 Output)  
Extend an RS-232 input.  
DVI input terminal  
Audio output  
Connect to the Component  
output terminal of DTV  
receiver.  
S-video input terminal  
Use this for the better video  
quality than video input  
terminal.  
This allows you to hear the  
sound for the current  
program.  
SCART input terminal  
Use this for composite-  
video input and audio-  
inputs using scart cable.  
ANT. input  
This allows you to connect  
your antenna.  
Power input terminal  
Power cord is connected  
here.  
Speaker terminal  
Stand assembly  
Speaker assembly  
Carrying handles  
Screw hole for fixing on a  
wall  
Video Composite input  
terminal for VCR  
Connect to the Composite  
Video output terminal of  
VCR or DVD player.  
Audio input terminal for  
VCR  
Connect this when S-video  
or Composite Video inputs.  
Video output  
This allows you to view the  
current program from  
another external source at  
the same time.  
Connect to the DTV receiver  
with DVI terminal or to  
external devices such as a  
PC.  
PC/DVI Audio input  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
POWER  
MUTE  
POWER/STANDBY  
Use this button to turn the TV set on or off.  
MUTE  
1
4
2
5
8
0
3
6
Use this button to turn the sound off  
completely.  
NUMERIC KEYS  
Use these buttons to select channels.  
PREVIEW  
Use this button to return to the previous  
channel.  
7
9
+100  
PREVIEW  
SOUND PICTURE ASPECT  
STILL  
ASPECT RATIO  
Use this button to quickly change the  
picture format.  
MTS  
STILL  
Use this button to freeze a picture.  
VOLUME  
Use this button to control the volume level  
CHANNEL  
SLEEP  
VOLUME  
CHANNEL  
SWAP  
ON/OFF SOURCE  
PIP  
SIZE  
Use these buttons to select channels.  
SWAP  
Use this button to switch what is being  
shown on the main picture to the sub-  
picture.  
MENU  
SIZE  
Use this button to change the size of a sub-  
picture.  
EXIT  
TV/AV  
SUB-PICTURE CHANNEL SELECTION  
Use these buttons to select or adjust each  
item of menu. Or you can select channels in  
sub-pictures.  
INFO  
WIPER  
PC AUTO  
CAPTION  
TV/AV buttons  
Use this button to display the available  
video sources.  
(TV, Video, S-Video, DTV, DVD, PC, DVI, Scart  
1, Scart 2)  
PC AUTO  
Use this button to automatically adjust  
settings according to the frequency and  
resolution selection in PC mode.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
CAPTION  
PIP (PICTURE IN PICTURE) ON/OFF  
Use this button to watch more than one picture at once.  
Use this button to displays the closed captions that are  
broadcasted with certain TV shows.  
SLEEP  
Use this button to allow your TV to turn off  
INFORMATION  
Use this button to display picture mode, resolution or  
automatically at designated time.  
various program information.  
MTS  
Use this button to display types of audio signals  
currently aired on TV. Or you can use this button to  
switch to other Sound Mode available.  
WIPER  
Use this button to prevent any possible ghosts. White  
bar will pass through the TV screen to prevent ghosts.  
EXIT  
SOUND  
Use this button to exit from a menu.  
Use this button to select the status of sound.  
SELECT/ADJUST  
Select or adjust each item of menu.  
PICTURE  
Use this button to select the status of picture.  
MENU  
+100 KEY  
Use this button to adjust screen, audio, channel,  
Use this button to select the channel above 100  
function, time, etc.  
SOURCE [MULTI SCREEN]  
Use this button to select input signals for sub-pictures.  
How to Insert Batteries in Remote Control  
1
2
3
Press and hold  
to open cover.  
∆part and push  
Insert batteries with proper  
polarities of + and - .  
Use the remote control with cover  
closed.  
*Battery type : 1.5V/UM-3(AA/R06)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How To Use Speakers (Standing Type)  
Parts configuration chart  
2 Speakers (left and right)  
4 brackets  
16 fixing screws  
2 sets of speaker cables  
(left and right)  
Assembly and Connection Method  
Insert brackets into the grooves on  
the rear of speakers and fasten them screws. (Left and right side each)  
with fixing screws.  
(Left and right side each)  
Connect speaker cables between  
terminals on the rear of speakers  
with speaker connection terminals  
on the rear of PDP. (Connect cables  
and terminals in the same color)  
Fasten with PDP body using fixing  
Do not move the product holding the speakers. Always use handles on the PDP.  
(Brackets connecting PDP and speakers may be damaged.)  
WARNING  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How To Use Speakers (Desk Type)  
Parts configuration chart  
2 Speakers (left and right)  
2 Speaker-stands  
(left and right)  
8 fixing screws  
2 sets of speaker cables  
(left and right)  
Assembly and Connect method  
Insert speaker-stands in the grove  
on the bottom of speakers and  
fasten them sing fixing screws.  
(Left and right side each)  
Connect speaker cables between  
terminals on the rear of speakers and  
speaker connection terminals on the  
rear of PDP. (Connect cables and  
terminals in the same color)  
Upright and place them on  
desired place left and right of PDP.  
(Left and right side each)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How To Install Wall Hanger Support  
1. Caution  
2. Parts configuration chart  
1. Install on the vertical wall surface only.  
2. Do not install on the following places to protect the  
performance of PDP and to prevent malfunction.  
Near sprinkler Detector  
Near heating devices  
Places where vibration or shock may be applied  
Near high voltage electric power line  
3. Install in a proper method with the structural materials of the  
wall. If the wall is not strong enough to stand weight of PDP  
set, reinforce the wall surface before installation.  
Wall mount frame  
Spring washer  
4. Do not install within a wall.  
4 screws  
4 plastics for  
mount frame  
3. Angle Adjustment(Option)  
The angle of PDP may be adjusted from 0 degree to 20 degree in 5 steps with 5 degrees.  
Use the angle adjustable hole on the side of fixing panel when adjustment is needed.  
(This function is supported with angle adjustable type wall mount frame only.)  
50 angle  
100 /00 angle  
150 angle  
200 angle  
50 angle  
150 angle  
No angle  
Angle adjustable hole  
* Fixed type wall mount frame does not support angle adjustable function.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How To Install Wall mount frame  
4. Installation Method  
1. Unscrew screws fasted on four spots on the back of PDP.  
3. Fix the wall mount frame on the wall with screws or  
nails.  
2. Fasten the screws and plastics for mount frame on the  
spot where screws were as shown on the picture.  
4. Hang the plastics for the mount frame on the wall mount  
frame. (If the PDP is lifted too much, the hanging plastic  
may be separated.)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How To Install Desktop Stand  
1. Place the PDP body on a flat desk or shelf. Clean the surface of the desk or shelf in order to prevent scratch on the  
product.  
2. Align the stand with PDP body below and fasten the stand bars using 4 fixing screws.  
3. After the assembly is over, stand the assembled product at a desired place.  
Fixing screws  
Desk type stand  
Warning : Do not install at an unstable place or on a small support.  
(When a child plays around the product and touch it, PDP may fall and injure the child.)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting VHF and UHF Antenna............................................23  
Connecting Cable TV ................................................................23  
Before connecting the video/audio connections to  
external devices .....................................................................25  
Connecting a VCR, Cable/Satellite Receiver ............................26  
Connecting a DVD Player .........................................................27  
Connecting a DTV(Digital Broadcast) Receiver ........................28  
Playing Back a Tape Recorded On a Camcorder ......................29  
Connecting to a PC(DVI, D-SUB) .............................................30  
Resolutions Supported in PC ...................................................31  
Scart Connection to the External Input ....................................32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting VHF and UHF Antenna  
Antenna with 75-ohm Round Leads  
-0*$10  
234'5"4'6  
!,-)*$.  
!,-)*$/  
If your antenna looks like this :  
it has 75-ohm round leads.  
Plug the antenna lead into the VHF/UHF terminal on the PDP.  
Use the Antenna Cable, an acessary included in the product package.  
Connecting Cable TV  
You can connect different cable systems to your PDP, including cable without a cable box,  
and cable with a cable box that descrambles some or all channels.  
-0*$10  
234'5"4'6  
!,-)*$.  
!,-)*$/  
Cable without a Cable Box  
Plug the incoming cable into the VHF/UHF terminal on the PDP.  
Use the Antenna Cable, an accessory included in the product package.  
Cable with a Cable Box that Descrambles All Channels.  
Find the cable connected to the ANTENNA OUT  
terminal on your cable box. This terminal might be  
labeled "ANT OUT", "VHF OUT", or simply "OUT".  
1
-0*$10  
234'5"4'6  
!,-)*$.  
!,-)*$/  
Connect the cable to the VHF/UHF terminal on the  
PDP.  
Use the Antenna Cable, an accessory included  
in the product package.  
2
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Cable with a Cable Box that Descrambles Some (But Not All) Channels  
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables.  
Find and disconnect the cable that is connected to the  
ANTENNA IN terminal of your cable box.  
This terminal might be labeled "ANT IN", "VHF IN",  
1
or simply, "IN". Connect this cable to a two-way splitter.  
Connect a coaxial cable between an OUTPUT terminal  
of the splitter and the IN terminal of the cable box.  
2
Connect a coaxial cable between the  
ANTENNA OUT terminal of the cable box  
and the B-IN terminal of the A/B switch.  
3
Connect a coaxial cable between the  
ANTENNA OUT terminal of the cable box  
and the B-IN terminal of the A/B switch.  
4
@
-0*$10  
234'5"4'6  
Connect the last coaxial cable between the  
OUT terminal of the RF (A/B) switch and  
the VHF/UHF terminal on the PDP.  
5
After you've made this connection, set the A/B switch to the "A" position for normal viewing.  
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch  
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually  
channel 3 or 4.)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before connecting the video/audio connections to external devices .....  
Please make sure to read the following information on connection to enjoy best picture quality.  
Video/Audio connectors  
Types of video/audio cable :  
➀ DVI-D ➀ 15-Pin D-Sub ➀ COMPONENT ➀ S-VIDEO ➀ COMPOSITE ➀ FULL SCART ➀ HALF SCART  
Best picture quality is displayed in the following order.  
DVI-D, D-Sub  
COMPONENT  
S-VIDEO  
COMPOSITE  
> > >  
The superior picture quality starts from the far left side.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Connecting a VCR, Cable/Satellite Receiver  
Connection Method  
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver and  
Video/S-Video input terminal of PDP.  
(Connect cables and terminal in the same colors)  
1
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellite  
receiver and Audio input terminal of PDP.  
(Connect cables and terminal in the same colors)  
2
317(&$,&8+&!1*($&"*  
317(&$,&8+&!1*($10  
-0*$10  
234'5"4'6  
!,-)*$.  
!,-)*$/  
VCR/Cable Receiver  
-0*$10  
-0*$&"*  
296  
2)6  
317(& !C317(&  
-"71&  
POWER Cable  
AUDIO Cable  
S-VIDEO Cable  
or  
VIDEO Cable  
How to Watch  
CURRENT : S-VEDIO  
T V  
TV/AV  
Turn on your PDP and press  
on remote control unit.  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
C O N N E C T  
C O N N E C T  
1
2
N O C A B L E  
N O C A B L E  
N O C A B L E  
N O C A B L E  
Press  
to move between entries. And press  
to select  
DTV  
PC  
DVI  
Video or S-Video.  
Use S-video cables for better picture quality.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD Player  
Connection Method  
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input  
terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP.  
(Connect cables and terminal in the same colors)  
1
Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio on  
the rear of PDP.  
(Connect cables and terminal in the same colors)  
2
317(&$,&8+&!1*($&"*  
DVD Player  
9
)
:
+;  
+<  
737$,&8+&0(0*2=>?@5=>?A5B.?A5/?>?@6  
317(&$,&8+&!1*($10  
!,-)*$.  
"  
9
)
:
+;  
+<  
!C317(& ,&8+&0(0*$317(& 317(&  
-"71&  
AUDIO Cable  
VIDEO(Y, Pb, Pr) Cable  
How to Watch  
CURRENT : DVD  
TV/AV  
Turn on your PDP and press  
on remote control unit.  
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
N O C A B L E  
N O C A B L E  
1
C O N N E C T  
N O C A B L E  
N O C A B L E  
N O C A B L E  
Press  
DVD.  
to move between entries. And press to select  
DTV  
2
PC  
DVI  
Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr.  
(It depends on DVD player)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Connecting a DTV(Digital Broadcast) Receiver  
Connection Method  
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input terminals(Y,  
Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors)  
1
Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for DTV Audio  
on the rear of PDP. (Connect cables and terminal in the same colors)  
2
317(&$,&8+&!1*($&"*  
DTV Receiver  
9
)
:
+;  
+<  
737$,&8+&0(0*2=>?@5=>?A5B.?A5/?>?@6  
317(&$,&8+&!1*($10  
!,-)*$.  
9
)
:
+;  
+<  
!C317(& ,&8+&0(0*$317(& 317(&  
-"71&  
AUDIO Cable  
VIDEO(Y, Pb, Pr) Cable  
How to Watch  
CURRENT : DTV  
TV/AV  
Turn on your PDP and press  
on remote control unit.  
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
N O C A B L E  
N O C A B L E  
1
N O C A B L E  
C O N N E C T  
N O C A B L E  
N O C A B L E  
Press  
DTV.  
to move between entries. And press  
to select  
DTV  
2
PC  
DVI  
To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to PDP.  
PDP cannot reproduce proper image, if the signal format is not supported by PDP.  
Please see the page 91, for the detailed signal formats that PDP supports.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back a Tape Recorded On a Camcorder  
Connection Method  
Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal of  
PDP.  
(Connect cables and terminal in the same colors)  
1
Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder /Game  
player and Audio input terminal of PDP.  
(Connect cables and terminal in the same colors)  
2
317(&$,&8+&!1*($&"*  
Game Player  
Camcorder  
317(&$,&8+&!1*($10  
-0*$10  
234'5"4'6  
"
!,-)*$.  
!,-)*$/  
296  
2)6  
317(&  
-"71&  
POWER Cable  
AUDIO Cable  
VIDEO Cable  
How to Watch  
CURRENT : VEDIO  
TV/AV  
Turn on your PDP and press  
on remote control unit.  
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
C O N N E C T  
N O C A B L E  
1
2
N O C A B L E  
N O C A B L E  
N O C A B L E  
N O C A B L E  
Press  
Video.  
to move between entries. And press  
to select  
DTV  
PC  
DVI  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Connecting to a PC(DVI, D-SUB)  
Connection Method  
Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal of a PDP.  
In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC and input terminal for  
DVI of PDP.  
1
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP. (Connect  
cables and terminal in the same colors)  
2
9
)
:
+;  
+<  
737$,&8+&0(0*2=>?@5=>?A5B.?A5/?>?@6  
0  
)  
9
)
:
+;  
+<  
AUDIO Cable  
DVI Cable(DIGITAL)  
or  
D-SUB Cable(15pin)  
When Using As a PC Monitor  
TV/AV  
Turn on your PDP and press  
on remote control unit.  
CURRENT : PC  
1
2
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
N O C A B L E  
N O C A B L E  
Press  
to move between entries. And press to select  
N O C A B L E  
N O C A B L E  
C O N N E C T  
C O N N E C T  
DTV  
PC  
DVI  
PC or DVI.  
DVI cable provides better picture quality.  
This product supports plug-and-play function.  
We recommend the above method if the satellite receiver supports DTV signal  
with DVI(Digital) and D-sub(15 pin) cable for the better quality picture.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resolutions Supported in PC  
Resolution  
640 x 350  
Horizontal frequency  
Vertical frequency  
70.09  
31.47  
37.86  
31.47  
37.86  
37.50  
43.27  
31.47  
37.88  
48.08  
46.88  
53.67  
49.72  
48.36  
60.02  
68.68  
85.08  
59.94  
72.80  
640 x 480  
720 x 400  
800 x 600  
75.00  
85.01  
70.08  
60.32  
72.18  
75.00  
85.06  
74.55  
832 x 624  
60.00  
75.03  
1024 x 768  
85.00  
* Recommended Resolution is 1024x768@60Hz : HQP421HR / HQP501HR  
* Recommended Resolution is 800x600@60Hz : HQP421SR  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Scart Connection to the External Input  
Connection Method  
This end can be fitted with : A Scart connector  
1
2
If you have video player that is supported CVBS, You can use Scart 1, Scart 2 port.  
-0*$10  
234'5"4'6  
4-9'$!,-)*  
'"99$!,-)*  
SET TOP BOX  
VCR  
DVD  
!C317(& ,&8+&0(0*$317(& 317(&  
-"71&  
Video Game Device  
Power Cable  
Video Disc Player  
Satellite Receiver  
VIDEO(CVBS) + Audio(L/R)  
“ A”  
How to Watch  
Turn on your PDP and press  
TV/AV  
on remote control unit.  
CURRENT : SCART 1  
1
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
N O C A B L E  
N O C A B L E  
C O N N E C T  
N O C A B L E  
N O C A B L E  
N O C A B L E  
N O C A B L E  
N O C A B L E  
Press  
to move between entries. And press  
to select  
2
DTV  
PC  
DVI  
Scart 1 or Scart 2.  
You can use composite video by scart 1/2, connector please contact your local service center about “A” cable.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Setup  
How to Select the Picture Mode ..............................................35  
How to Set the Desired Picture ................................................36  
How to Set Blue Screen ...........................................................37  
How to Set Film Mode .............................................................38  
How to Select a Color Temperature .........................................39  
How to Set PIP [Mode] .............................................................40  
How to Set Multi-Screen [Input Source/Position/Size] ............41  
Supported PIP Table .................................................................43  
How to Set Noise Reduction ................................................... 44  
How to Select the Fit(Fine Image Technology) Engine Mode ...45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select the Picture Mode  
Users can adjust picture mode automatically according to the input mode(TV, Video, S-Video, F/H Scart, DVD, DTV).  
Press Menu button.  
Menu items appear on the screen.  
P I C T U R E  
MENU  
M O D E  
STANDARD  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
2
3
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“MODE”.  
P I C T U R E  
M O D E  
STANDARD  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
Press Left and Right buttons,  
then the menu changes in order below.  
Standard DYNAMIC Movie  
MILD User  
OFF  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
STANDARD : For general contents. It fits most video contents.  
DYNAMIC : For a clear display.  
MOVIE : For movies.  
MILD : For a soft display.  
USER : When the user wants to set the values  
see the next page  
PICTURE  
How To Directly Select Picture Mode : Press  
button.  
- Users can select Standard Dynamic Movie Mild USER, when the input mode is TV, S-Video, Scart 1/2,  
DVD, DTV.  
- Users can select Standard Low(Text Mode) High(Movie), when the input mode is PC or DVI.  
In the user’s mode, the users can adjust at thier preference contrast, brightness, sharpness, color, tint at  
standard, dynamic, movie, or mild mode.  
*Adjustments menu may be different according to the input source.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set the Desired Picture  
Users can manually adjust the picture in their own ways.  
Press Menu button.  
MENU  
P I C T U R E  
M O D E  
STANDARD  
Menu items appear on the screen.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“PICTURE”  
P I C T U R E  
M O D E  
STANDARD  
2
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“PICTURE CUSTOM”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to select  
“PICTURE CUSTOM”.  
Picture Custom menu appears.  
P I C T U R E C U S TO M  
C O N T R A S T  
0 8 0  
0 7 0  
0 5 0  
0 5 0  
0 5 0  
4
B R I G H T N E S S  
S H A R P N E S S  
C O L O R  
T I N T  
Choose one of the items listed,  
then Press Left and Right buttons to adjust.  
S E L E C T  
M O V E  
M E N U  
5
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
CONTRAST : Adjust the brightness and darkness of object and background.  
BRIGHTNESS : Adjust the brightness of the entire picture.  
SHARPNESS : Adjust clarity of outline of objects.  
COLOR : Adjust colors into deeper or lighter colors.  
TINT : Adjust colors naturally.  
This only applies to NTSC mode.  
Setting of Color and Tint is not supported in PC, DVI and DTV input modes.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set Blue Screen  
If there is no broadcast or no signal from a connected external device, your PDP will show a blue screen.  
If a broadcast signal comes in, the blue screen will be converted to a normal screen.  
Press Menu button.  
P I C T U R E  
MENU  
M O D E  
Menu items appear on the screen.  
STANDARD  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
+ 000  
F I T E N G I N E  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to select  
“PICTURE”.  
P I C T U R E  
M O D E  
STANDARD  
2
3
4
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“BLUE SCREEN”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to “ON/OFF”.  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
In the status of Blue Screen active, when the main picture receives no signal during watching a TV or VCR  
program as a main picture while viewing a VCR or TV program as a sub picture in PIP mode, the entire screen  
(including both main and sub pictures) will turn blue. When the main picture signal comes back, the both  
pictures will be restored to normal.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set Film Mode  
Set Film Mode to receive a crisp, clear picture without flickering.  
Press Menu button.  
MENU  
P I C T U R E  
M O D E  
STANDARD  
Menu items appear on the screen.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
P I C T U R E  
Press Left and Right button to select  
M O D E  
STANDARD  
2
“PICTURE”.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“FilM mode”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right button to “ON/OFF”.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
You may experience the distortion of the screen edge during a DVD or VCR playback. This may be caused by  
bad edit of a film (a DVD title or tape). If you have come across this symptom, select OFF in the Film Mode.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select a Color Temperature  
Users can adjust Color as users want.  
Press Menu button.  
MENU  
P I C T U R E  
M O D E  
STANDARD  
Menu items appear on the screen.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to select  
“PICTURE”.  
P I C T U R E  
M O D E  
STANDARD  
2
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“COLOR TEMP”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right button, then Mode changes in order below.  
4
Standard Cool Warm  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
STANDARD : Colors for general picture.  
COOL : Cool colors with bluish tone.  
WARM : Warm colors with reddish tone.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set PIP [Mode]  
This is to set PIP(Picture In Picture) mode or Twin mode.  
Press Menu button.  
MENU  
P I C T U R E  
M O D E  
STANDARD  
Menu items appear on the screen.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to select  
“PICTURE”.  
P I C T U R E  
M O D E  
STANDARD  
2
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“PIP”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right button to select  
P I P  
“PIP”.  
M O D E  
OFF  
TV  
4
S O U R C E  
S WA P  
SWAP  
Menu items appear on the screen.  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Press Up and Down button to move to  
“MODE”.  
S E L E C T  
M O V E  
M E N U  
5
Press Left and Right button, then Mode changes in order below.  
PIP TWIN OFF  
6
Main  
Main  
Sub  
Sub  
PIP : To watch the Sub screen in the main  
screen at once.  
TWIN : To watch two screens in half and  
half.  
After setting this, go to step 7 to set the SOURCE.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set Multi-Screen [Input Source/Position/Size]  
This is to set the Input Source, Position and Size of the Sub-picture. (This function is available only when PIP  
mode active.)  
Press Up and Down buttons to move to  
“SOURCE”.  
P I P  
7
M O D E  
OFF  
TV  
S O U R C E  
S WA P  
SWAP  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Press Left and Right button, then source  
changes in order below.  
8
S E L E C T  
M O V E  
M E N U  
TV Video S-Video SCART 1  
SCART 2 DVD DTV PC DVI  
In case of PIP mode, go to step 9  
if you need to set the “SWAP” of Main and sub pictures.  
Press Up and Down buttons to move to  
“SWAP”.  
P I P  
9
M O D E  
OFF  
TV  
S O U R C E  
S WA P  
SWAP  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Press Left and Right buttons.  
10  
S E L E C T  
M O V E  
M E N U  
In case of PIP mode, go to step 11  
if you need to set the “SIZE” of Sub picture.  
Press Up and Down buttons to move to  
“Size”.  
P I P  
11  
12  
M O D E  
OFF  
TV  
S O U R C E  
S WA P  
SWAP  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Press Left and Right buttons to set to  
“LARGE/SMALL”.  
S E L E C T  
M O V E  
M E N U  
In case of PIP mode, go to step 13  
if you need to set the “POSITION” of Sub picture.  
Press Up and Down buttons to move to  
“POSITION”.  
13  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Press Left and Right button, then position  
changes in order below.  
P I P  
M O D E  
OFF  
TV  
S O U R C E  
S WA P  
14  
SWAP  
Right Down Left Down  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Left Up  
Right Up  
In case the Input source in Sub picture is TV,  
go to step 15 when you wish to change the  
channels of Sub picture.  
S E L E C T  
M O V E  
M E N U  
Press Up and Down buttons to move to  
“Channel”.  
P I P  
15  
16  
M O D E  
OFF  
TV  
S O U R C E  
S WA P  
SWAP  
S I Z E  
LARGE  
RIGHT DOWN  
037  
P O S I T I O N  
C H A N N E L  
Press Left and Right button to select  
“Channel Number”.  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
Adjust the location in PIP  
Adjust the size in PIP  
For details on Hot-keys on the remote control, please go to the next page.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hot-Keys on the Remote Control  
ON/OFF  
PIP  
How to Directly Turn PIP FUNCTION ON/OFF : Press  
button.  
To turn ON/OFF the PIP function  
SIZE  
How To Directly Adjust PIP MODE & SIZE : Press  
button.  
To watch PIP/TWIN ways or to adjust the Size of Sub picture.  
Large Small TWIN  
SOURCE  
CURRENT : TV  
How To Directly Change Sub Source : Press  
button.  
T V  
V I D E O  
S - V I D E O  
S C A RT 1  
S C A RT 2  
DVD  
N O C A B L E  
N O C A B L E  
Press Up and Down buttons to move to the Sub Source.  
And select using Left or Right button.  
N O C A B L E  
N O C A B L E  
N O C A B L E  
N O C A B L E  
DTV  
PC  
DVI  
SWAP  
How To Directly Set The SWAP : Press  
button.  
To swap the Main picture and sub picture.  
How To Directly Set The Sub Channel : Press  
button.  
Main and sub pictures cannot have the same input source.  
Supported PIP Table  
PIP : O → Supported, X → Not Supported  
Sub  
PC  
DVI  
DTV  
DVD  
TV  
S-Video  
Video  
Scart 2  
Scart 1  
Main  
PC  
X
X
X
X
O
O
O
O
O
DVI  
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
O
X
O
O
O
O
O
O
O
X
DTV  
DVD  
X
X
X
X
TV  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
S-Video  
Video  
Scart 2  
Scart 1  
O
O
O
O
O
O
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set Noise Reduction  
This is to eliminate some noise on the screen in Video mode.  
Press Menu button.  
MENU  
P I C T U R E  
M O D E  
STANDARD  
Menu items appear on the screen.  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to select  
“PICTURE”.  
P I C T U R E  
M O D E  
STANDARD  
2
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“NOISE REDUCT”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right button to adjust  
Screen quality.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
In the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the pictures  
may become degraded.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select the Fit(Fine Image Technology) Engine Mode  
Fit Engine mode function allows users to experience more lively, clearly and brightly images. (For 50” PDP only)  
Press Menu button.  
Menu items appear on the screen.  
P I C T U R E  
MENU  
M O D E  
STANDARD  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down buttons to move to  
“Picture” icon.  
1
2
3
4
S E L E C T  
M O V E  
M E N U  
Press Left and Right button to select  
“PICTURE”.  
P I C T U R E  
M O D E  
STANDARD  
P I C T U R E C U S TO M  
B L U E S C R E E N  
F I L M M O D E  
C O L O R T E M P  
P I P  
OFF  
OFF  
STANDARD  
N O I S E R E D U C T  
F I T E N G I N E  
+ 000  
OFF  
Press Up and Down button to move to  
“FIT ENGINE”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right button, then the menu  
changes in order below.  
DEMO  
OFF DEMO ON ON  
OFF  
ON  
Press MENU button after the setting is done,  
and Menu goes to the previous menu.  
EXIT  
If the EXIT button is pressed, the menu disappears.  
Only In the FIT ENGINE demo mode, Demo OSD can appear on the screen after 1 or 2 seconds.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Sound Setup  
How to Select the Audio Mode ................................................47  
How to Set the Desired Audio ..................................................48  
How to Select AVL ....................................................................49  
How to Select SRS WOW(Surround) ........................................50  
How to Select MTS(Multi-Channel Sound) ...............................51  
How to Set the Output of Subwoofer .......................................52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select the Audio Mode  
Users can adjust sound mode automatically as users want.  
Press Menu button.  
MENU  
S O U N D  
M O D E  
STANDARD  
Menu items appear on the screen.  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SOUND”.  
S O U N D  
M O D E  
STANDARD  
2
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Left and Right button, then the menu  
changes in order below.  
S E L E C T  
M O V E  
M E N U  
3
Standard Music Movie  
News  
User  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
STANDARD : For the general sound. This fits most audio contents.  
MUSIC : For enjoying original sound.  
MOVIE : For grandiose sound.  
NEWS : For the clear sound.  
USER : When the user wants to set the value  
see the next page  
SOUND  
How To Directly Select Picture Mode : Press  
button.  
Users can select STANDARD MUSIC MOVIE NEWS USER in order.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set the Desired Audio  
Users can manually adjust the sound in thier own ways.  
Press Menu button.  
MENU  
S O U N D  
M O D E  
STANDARD  
Menu items appear on the screen.  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SOUND”.  
S O U N D  
M O D E  
STANDARD  
2
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND custom ”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to select  
“SOUND custom”.  
Sound Custom menu appears.  
S O U N D C U S TO M  
V O L U M E  
1 0  
4
B A L A N C E  
E Q U A L I Z E R  
+ 0 0  
8
1 3  
1 4  
1 3  
1 2  
1 0 0 H z 5 0 0 H z  
1 . 5 K  
5 K  
1 0 K  
M E N U  
Choose one of the items listed,  
then Press Left and Right buttons to adjust.  
S E L E C T  
M O V E  
5
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
VOLUME : Adjusts the volume.  
BALANCE : Adjusts the balance of left and right speakers.  
EQUALIZER : Adjusts the audio output signal in the desired band.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select AVL  
This function automatically gives a similar volume size to each channel.  
Press Menu button.  
MENU  
S O U N D  
M O D E  
STANDARD  
Menu items appear on the screen.  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SOUND”.  
S O U N D  
M O D E  
STANDARD  
2
S O U N D C U S TO M  
AV L  
ON  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“AVL”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to “ON/OFF”.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Select SRS WOW(Surround)  
You can enjoy the spectacular, clear and crisp sound.  
Press Menu button.  
MENU  
S O U N D  
M O D E  
STANDARD  
Menu items appear on the screen.  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SOUND”.  
S O U N D  
M O D E  
STANDARD  
2
C U S TO M  
AV L  
OFF  
ON  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SRS WOW”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to “ON/OFF”.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
The SRS WOW function is activated only when the audio input signal is Stereo.  
is a trademark of SRS Labs, Inc.  
WOW technology is incorporated under license from SRS Labs, Inc.  
Remarkable Enhancement for Mono or Stereo Playback  
TM  
WOW ‚ is an award-winning, patented technology that significantly enhances the quality of mono and stereo audio material. It creates the  
perception of improved dynamics and bass performance over standard speakers or headphones.  
WOW makes up for the limitations inherent in smaller speakers and headphones by providing a panoramic three-dimensional audio image  
that extends the sound in both the horizontal and vertical planes well beyond the speakers or headphones themselves. As a result,  
manufacturers of small audio devices, televisions, wireless and personal/portable products can dramatically improve their product’s audio  
performance without enlarging the speaker size. The enriching effects of WOW are especially noticeable on digitally compressed mono or  
stereo audio in formats such as MP3, WMA and audio CD in which the “tinny” hollow sound is greatly reduced.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select MTS(Multi-Channel Sound)  
Depending on the particaular program being brodcast, you can select to stereo, mono, or a Separate Audio  
Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like  
news or weathter.)  
Press Menu button.  
Menu items appear on the screen.  
S O U N D  
MENU  
M O D E  
STANDARD  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“Sound” icon.  
1
2
3
4
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“Sound”.  
S O U N D  
M O D E  
STANDARD  
S O U N D C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“MTS”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons,  
Repeatedly to select “MONO”, “STEREO” or “SAP”.  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
MTS  
How To Directly Select MTS : Press  
button.  
Repeatedly to select “MONO”, “Stereo” or “SAP”.  
- Choose “Stereo” for channels that are broadcasting in STEREO.  
- Choose “MONO” for channels that are broadcasting in MONO, or if you are having difficultly receiving a STEREO  
signal.  
- Choose “SAP” to listen to the seperate audio program, which is usually a foreign-language translation.  
If the signal reception conditions deteriorate, setting to Mono will make your listening condition better.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set the Output of Subwoofer  
You can set this function when you wish to install your subwoofer speaker system.  
Press Menu button.  
Menu items appear on the screen.  
S O U N D  
MENU  
M O D E  
STANDARD  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SOUND” icon.  
1
2
3
4
5
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SOUND”.  
S O U N D  
M O D E  
STANDARD  
C U S TO M  
AV L  
OFF  
OFF  
S R S W O W  
M T S  
MONO  
S U B W O O F E R  
Press Up and Down buttons to move to  
“SUB WOOFER”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“SUB WOOFER”.  
Sub Woofer menu appears.  
S U B W O O F E R  
M O D E  
OFF  
V O L U M E  
F R E Q E N C Y  
0 2 0  
200 Hz  
Choose item, then Press Left and Right buttons  
to adjust.  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
- The frequencies in the entry are the subwoofer’s frequency range.  
- You make sure to use a subwoofer speaker system with built-in amplifier.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Channel Setup  
Memorizing the Channels ........................................................55  
Fine Tuning Channel Reception ...............................................56  
Storing Channels Manually ......................................................57  
Using the LNA(Low-Noise-Amplifier) Feature ..........................58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels  
Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the  
available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to  
change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast  
source, memorizing the channels (automatic) and adding and deleting channels (manual).  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify the type of signal source that is  
connected to the TV (i.e., an antenna or a cable system).  
Press Menu button.  
Menu items appear on the screen.  
C H A N N E L  
MENU  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“CHANNEL” icon.  
S E L E C T  
M O V E  
M E N U  
1
2
3
4
5
6
Press Left and Right buttons to select  
“CHANNEL”.  
AIR/CATV is highlighted.  
C H A N N E L  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Repeatedly press the Left/Right buttons to  
cycle through these choices :  
S E L E C T  
M O V E  
M E N U  
STD HRC IRC AIR  
A U TO P R O G R A M  
Y E S  
N O  
Press Up and Down buttons to move to  
“AUTO PROGRAM”.  
Press Left and Right buttons to select  
“AUTO PROGRAM”.  
AUTO PROGRAM menu appears.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“YES”, then store the selected channels.  
- STD, HRC and IRC identify various types of cable TV systems. contact your local cable company to identify  
the of cable system that exists in your particular area.  
- The PDP automatically cycles through all available channels and stores them in memory.  
- If you press the MENU button in the middle of AUTO STORE, the first stored channel will be displayed, and  
the AUTO STORE stops.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Fine Tuning Channel Reception  
If the reception is clear, you do not have to fine tune channels, as this is done automatically during the search  
and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.  
Press Menu button.  
Menu items appear on the screen.  
C H A N N E L  
MENU  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“CHANNEL” icon.  
1
2
3
4
5
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“CHANNEL”.  
C H A N N E L  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“Fine Tune”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“Fine Tune”.  
New Menu items appears.  
F I N E T U N E  
C H A N N E L  
2 0  
+ 0 0  
Press Left and Right buttons to  
adjust Screen.  
*Channel number is current channel.  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
OSD for the fine tuned channels is highlighted in blue.  
On INFORMATION active, MFT (Manual Fine Tune) after the channel number will be displayed.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Channels Manually  
You can exclude the channels of your choice from the channel scan operation. When you scan through the  
stored channels, those that you have chosen to skip are thus not displayed.  
All channels that you do not specifically choose to skip are displayed during scanning.  
Press Menu button.  
Menu items appear on the screen.  
C H A N N E L  
MENU  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“CHANNEL” icon.  
1
2
3
4
5
6
7
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“CHANNEL”.  
C H A N N E L  
A I R / C AT V  
AIR  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“CHANNEL STORE”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“CHANNEL STORE”.  
Channel Store menu appears.  
C H A N N E L S TO R E  
C H A N N E L  
18  
A D D / D E L E T E  
ERASE  
*The displayed channel number  
indicates a current channel.  
Press Left and Right buttons to select  
Channel Number.  
S E L E C T  
M O V E  
M E N U  
C H A N N E L S TO R E  
Press Up and Down buttons to move to  
“ADD/DELETE”.  
C H A N N E L  
A D D / D E L E T E  
18  
ERASE  
Press Left and Right buttons,  
then select ADD or ERASE.  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
MENU  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Using the LNA(Low-Noise-Amplifier) Feature  
If the reception is clear, you don’t have to use this feature.  
If the signal is weak or distorted, try the followings.  
Press Menu button.  
MENU  
C H A N N E L  
A I R / C AT V  
AIR  
Menu items appear on the screen.  
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
OFF  
Press Up and Down buttons to move to  
“CHANNEL” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“CHANNEL”.  
C H A N N E L  
A I R / C AT V  
AIR  
ON  
2
A U TO P R O G R A M  
F I N E T U N E  
C H A N N E L S TO R E  
L N A  
Press Up and Down buttons to move to  
“LNA”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to  
ON/OFF.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Function Setup  
How to Select the Aspect Ratio ...............................................61  
Displaying Information .............................................................63  
How to Set Key-Lock ...............................................................64  
Using the Pixel Shift / Full White / Wiper Function ..................65  
How to Freeze Picture .............................................................66  
How to Set DPMS .....................................................................67  
Choosing the Your Languages .................................................68  
How to Set Image Adjust in PC Mode ......................................69  
Viewing Closed Captions .........................................................71  
Using the V-Chip ......................................................................73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Select the Aspect Ratio  
Users can adjust Aspect Ratio as users want.  
Press Menu button.  
MENU  
F U N C T I O N  
A S P E C T R AT I O  
WIDE  
OFF  
Menu items appear on the screen.  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
2
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“ASPECT RATIO”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to select  
“ASPECT RATIO”.  
4
Press Left and Right buttons, then the menu changes in order below.  
Wide Normal Panorama Zoom1 Zoom2 Zoom3 Auto Wide  
5
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
ASPECT  
How To Directly Select Aspect Ratio : Press  
button.  
OSD menu displays the current aspect ratio.  
If you press the ASPECT button second time, aspect ratio will be changed according to Input mode as follows :  
- Under DTV, DVD inputs : Users can select Wide Zoom1 Zoom2 Zoom3 Auto Wide in order.  
- Under PC, DVI inputs : Users can select Wide Normal Auto Wide in order.  
- Under other inputs : Users can select Wide Normal  
in order.  
Panorama  
Zoom1 Zoom2 Zoom3 Auto Wide  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
WIDE / AUTO WIDE  
General broadcast picture is adjusted  
to 16:9.  
NORMAL  
General picture size.  
PANORAMA  
Picture size for panorama video.  
ZOOM1  
Zoom in 16:9 in vertical direction.  
ZOOM2  
The picture enlarged to 16:9 format.  
This mode is recommended in letter  
box format.  
ZOOM3  
This Mode is used to display 4:3.  
The picture using the full surface of the  
screen leaving the Sub-title visible.  
SubTitle  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying Information  
You can view the channel information and setting status by pressing the “INFO” button on the remote control.  
AIR - 020  
12 : 30 AM  
PICTURE MODE  
:
STANDARD  
USER  
MONO  
MONO  
INFO  
INFO  
INFO  
SOUND MODE  
MTS MODE  
INPUT SIGNAL  
:
In case of applying TV input  
Press INFO button.  
:
:
VIDEO  
12 : 30 AM  
-
NTSC  
In case of applying VIDEO input  
Press INFO button.  
PC  
12 : 30 AM  
-
1024x768 70Hz  
In case of applying PC input  
Press INFO button.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set Key-Lock  
This is to lock the control buttons on the front bottom of PDP.  
Press Menu button.  
MENU  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
Menu items appear on the screen.  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
ON  
2
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“KEY LOCk”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to  
ON/OFF.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT  
button is pressed, the menu disappears.  
EXIT  
When the AC power supply is cut off, key-lock function is automatically off.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Pixel Shift / Full White / Wiper Function  
This feature is designed to reduce image sticking effects during displaying a static picture.  
(Brightness degradation is caused by the scale effects of a panel, which is characteristic of a PDP.)  
Press Menu button.  
Menu items appear on the screen.  
F U N C T I O N  
MENU  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
2
3
4
4
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“PIXEL SHIFT” or “FULL WHITE”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to  
“ON/OFF”.  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
While FULL WHITE is activated, if you wish to switch the mode to Off or wish to use other function,  
press any of buttons on the remote control unit or any of control keys on the PDP unit. Then the  
menu screen will appear again. Press the left or right button to deactivate the current mode.  
It may take from several minutes up to several hours to remove the image sticking. If a fixed pattern is displayed for a  
long time, you can prevent the latent image by switching FULL WHITE to On for 2 or 3 minutes on a hourly basis.  
The image sticking effect is influenced by the brightness of a fixed pattern and its display time. It is recommended that  
you reduce the level of the brightness by using picture controls (See page 36) when a fixed pattern is displayed for a  
long time.  
WIPER  
How To Directly Select Wiper : Press  
button.  
The image sticking (brightness degradation) is eliminated as white bars are moving in the right direction.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Freeze Picture  
The user can temporarily stop the playing picture.  
Press Still button.  
Playing picture is stopped.  
STILL  
- Under multi-screen mode(PIP, TWIN), the main picture stops.  
To deselect Still function.  
Press Still button once more.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set DPMS  
When in PC mode, you can activate Power Saving mode.  
Press Menu button.  
MENU  
F U N C T I O N  
A S P E C T R AT I O  
WIDE  
OFF  
Menu items appear on the screen.  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
2
OFF  
OFF  
ON  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“DPMS”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to  
“ON/OFF”.  
4
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
DPMS feature is available for PC mode only.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Choosing the Your Languages  
When you start using your TV for the first time, you must select your language preference in order to display main  
menus and sub menues, etc.  
Press Menu button.  
Menu items appear on the screen.  
F U N C T I O N  
MENU  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
2
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“LANGUAGE”.  
S E L E C T  
M O V E  
M E N U  
3
4
Press Left and Right button, then the menu changes in order below.  
English French German Spanish Italian  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set Image Adjust in PC Mode  
Press Menu button.  
MENU  
F U N C T I O N  
A S P E C T R AT I O  
WIDE  
OFF  
Menu items appear on the screen.  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
2
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“IMAGE ADJUST”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons to select  
“IMAGE ADJUST”.  
Image adjust menu appears.  
I M A G E A D J U S T  
P O S I T I O N  
P O S I T I O N  
H
V
+ 0 0 0  
4
+ 0 0 0  
+ 0 0 0  
+ 0 0 0  
F R E Q U E N C Y  
P H A S E  
A U TO A D J U S T  
Press Up and Down buttons to chosse  
Item.  
S E L E C T  
M O V E  
M E N U  
5
Press Left and Right buttons to adjust.  
6
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
HORIZONTAL POSITION : To adjust the horizontal position of the picture.  
VERTICAL POSITION : To adjust the vertical position of the picture.  
FREQUENCY : To adjust to reduce the noise on the picture.  
PHASE : To adjust to eliminate the shake of the picture.  
Auto ADJUST : Horizontal/vertical positions are automatically adjusted.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
PC AUTO  
How To Directly Select Auto Track : Press  
button.  
Automatically adjust Horizontal/Vertical position of the picture.  
- This function is provided in only PC mode.  
- When executing PC AUTO, optimum picture can be obtained if the setting is made under the full pattern.  
- You can store up to six modes by activating PC AUTO function.  
If you exceed six modes, the first stored mode information will be removed and a newly stored mode will be  
stored.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Closed Captions  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are  
usually subtitles for the hearing impaired or foreignlanguage translations. All VCRs record the closed caption signal  
from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial  
video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on  
CC  
the tape’s packaging :  
* The Caption feature does not work with DVD or DTV signals.  
Press Menu button.  
MENU  
F U N C T I O N  
A S P E C T R AT I O  
WIDE  
OFF  
Menu items appear on the screen.  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
2
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
S E L E C T  
M O V E  
M E N U  
3
“CAPTION”.  
Press Left and Right buttons to select  
“CAPTION”.  
Caption menu appears.  
C A P T I O N  
C A P T I O N  
M O D E  
ON  
4
CAPTION  
CHANNEL1  
FIELD1  
C H A N N E L  
F I E L D  
Caption is highlighted.  
Press Left and Right buttons to “ON/OFF”.  
S E L E C T  
M O V E  
M E N U  
5
C A P T I O N  
Press the Down button and then go to step 6  
if you need to set the Mode.  
C A P T I O N  
M O D E  
ON  
TEXT  
C H A N N E L  
F I E L D  
CHANNEL1  
FIELD1  
Press Left and Right buttons to select  
“TEXT or CAPTION”.  
S E L E C T  
M O V E  
M E N U  
6
Press the Down button and then go to step 7  
if you need to depending on the particular broadcast, it might be  
necessary to make changes to "Channels" and "Field"  
Continued on next page ......  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
...... Continued from previous page.  
C A P T I O N  
C A P T I O N  
M O D E  
ON  
TEXT  
C H A N N E L  
F I E L D  
CHANNEL2  
FIELD1  
Press the UP/DOWN/LEFT/RIGHT button  
to make the changes.  
7
8
S E L E C T  
M O V E  
M E N U  
C A P T I O N  
Follow the same procedure as in steps 6 above.  
C A P T I O N  
M O D E  
ON  
TEXT  
C H A N N E L  
F I E L D  
CHANNEL2  
FIELD2  
Press MENU button after the setting is done,  
and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
S E L E C T  
M O V E  
M E N U  
Different channels and fields display information.  
Field 2 carries additional information that supplements the information in Field 1.  
(For example, channel 1 may have subtitles in English, while channel 2 has subtitles in spanish.)  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the V-Chip  
The V-Chip feature automatically locks out programs that are deemed inapproprite for children.  
The user must enter a PIN(Personal ID Number) before any of the V-chip restrictions are set up or changed.  
*When the V-Chip feature is activated, the PIP features do not function.  
Press Menu button.  
Menu items appear on the screen.  
F U N C T I O N  
MENU  
A S P E C T R AT I O  
WIDE  
OFF  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
Press Up and Down buttons to move to  
“FUNCTION” icon.  
V- C H I P  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“FUNCTION”.  
F U N C T I O N  
A S P E C T R AT I O  
K E Y L O C K  
P I X E L S H I F T  
F U L L W H I T E  
D P M S  
WIDE  
OFF  
2
3
4
5
6
7
8
OFF  
OFF  
OFF  
L A N G U A G E  
I M A G E A D J U S T  
C A P T I O N  
ENGLISH  
V- C H I P  
Press Up and Down buttons to move to  
“V-CHIP”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“V-CHIP”.  
The message “Enter PIN” will appear.  
E N T E R P I N  
E N T E R P I N  
:
-
-
-
-
Enter you 4-digit PIN number.  
The defualt PIN number of a new TV set is “0-0-0-0”.  
The "V-Chip" Screen will appear.  
S E L E C T  
M O V E  
M E N U  
F U N C T I O N  
Press Up and Down buttons to move to  
“CHANGE PIN”,  
V- C H I P  
OFF  
T V G U I D E  
M A P P  
C H A N G E P I N  
Press Left and Right buttons to select  
“CHANGE PIN”.  
The change PIN screen will appear.  
S E L E C T  
M O V E  
M E N U  
Chooose any 4-digits for your PIN and enter them.  
As soon as the 4-digits are entered, the "Confirm  
New PIN" screen appears.  
C H A N G E P I N  
C H A N G E P I N  
:
-
-
-
-
S E L E C T  
M O V E  
M E N U  
Continued on next page ......  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
...... Continued from previous page.  
C O N F I R M P I N  
C O N F I R M P I N  
:
-
-
-
-
Re-enter the same 4 digits.  
When the confirm screen disappears,  
your PIN has been memoriged.  
V-CHIP is highlighted.  
9
S E L E C T  
M O V E  
M E N U  
Go to step 10, if you need to set restrictions using the “TV Guideline”.  
If you foget the PIN, Press the remote-control buttons in the following sequence,  
which resets the PIN to "0-0-0-0".  
MENU + MTS + SLEEP + INFO (On the Remote Control)  
This message should be printed on a separate page of paper or on a page of the manual that can be removed  
by a parent and put in a safe place where the children cannot find this message!!  
Parental Restrictions can be set up using either of  
F U N C T I O N  
two methods : The TV guidelines or the MPAA rasting.  
V- C H I P  
ON  
T V G U I D E  
M A P P  
C H A N G E P I N  
Press Left and Right buttons to “ON/OFF”.  
10  
11  
12  
13  
S E L E C T  
M O V E  
M E N U  
Press Up and Down buttons to move to  
“TV GUIDE”.  
T V G U I D E  
A L L F V  
U
V
S
L
D
U
T V- Y  
T V- Y 7  
T V- G  
U
U
U
T V- P G  
T V- 1 4  
T V- M A  
U
U
U
U
U
U
U
U
U
U
U
:
U
U
B
:
B L O C K  
U
U N B L O C K  
Press Left and Right buttons to select “TV GUIDE”.  
TV Guide menu appears .  
S E L E C T  
M O V E  
M E N U  
Press the Up and Down button to select  
one of the six age-based categories.  
TV-Y : Young children  
TV-PG : Parental guidance  
TV-14 : Viewers 14 and over  
TV-MA : Mature audience  
TV-Y7 : Children 7 and over  
TV-G : General audience  
Continued on next page ......  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
...... Continued from previous page.  
At this point, one of the TV-Guidelines is selected.  
Press the right button : Depending on your exiting setup, a letter "U" or "B" will start blinking.  
(U=Unblocke, B=Blocked)  
14  
15  
Whlie the "U" or "B" is blinking, press the Up and Down button to block or Unblock the category.  
Press the Right button to save the TV-Guidelines.  
A TV-Rating will selected, and no letters will blink.  
To select a differnt TV-Rating, press the Up and Down button and them repeat the process.  
Note 1 : The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.  
See the next step to change any of the following sub-ratings:  
FV : Fantasy violence  
L : Adult Language  
S : Sexual situation  
V : Violence  
D : Sexually Sugessive Dialog  
Note 2 : The V-Chip will automatically block certain categories that are “more restrictive”.  
For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.  
Similarly, if you block the TV-G category, then all the categories in the “young adult”  
group will be blocked (TV-G, TV-PG, TV-14 and TV-MA).  
The sub-ratings (D, L, S, V) work together similarly. (See next section.)  
Go to step 16, if you need to set FV, D, L, S and V sub-ratings.  
First, select one of these TV-Ratings :  
TV-Y7, TV-PG, TV-14 or TV-MA (See Step ~, on previous page).  
16  
17  
18  
Next, while the TV-Rating is selected, repeatedly press the RIGHT button.  
This will cycle through the available sub-ratings (FV,L, S, D or V).  
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is  
blinking, press the UP or DOWN button to change the sub-rating.  
Press the RIGHT button to save the TV guidelines. A TV-Rating will be selected and no  
letters will select. To select a different TV-Rating, press the UP or DOWN button and then  
repeat the process.  
Note : The V-chip will automatically block certain categories that are “More restrictive”.  
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14  
and TV-MA will automatically be blocked.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Clock Setup  
How to Set Clock ........................................................................77  
How to Set On Time ....................................................................78  
How to Set Off Time ....................................................................80  
How to Set Sleep Time ...............................................................82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set Clock  
You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock if  
you wish to use the automatic on or off timers.  
Ex) To set to 6:30 PM,  
Press Menu button.  
Menu items appear on the screen.  
T I M E  
MENU  
C L O C K  
AM  
O N T I M E  
O F F T I M E  
S L E E P  
AM  
O F F  
O F F  
O F F  
O F F  
O F F  
OFF  
Press Up and Down buttons to move to  
“TIME” icon.  
1
2
3
4
5
6
7
8
9
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“TIME”.  
T I M E  
C L O C K  
AM  
O N T I M E  
O F F T I M E  
S L E E P  
PM  
OFF  
Press Up and Down buttons to move to  
“CLOCK”.  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“CLOCK”.  
Press the button a second time  
to move to "HOUR".  
T I M E  
C L O C K  
6
AM  
O N T I M E  
O F F T I M E  
S L E E P  
AM  
OFF  
Press Up and Down buttons to set to  
“6”.  
S E L E C T  
M O V E  
M E N U  
T I M E  
3 0  
Press Left and Right buttons to move to  
“MINUTE” unit.  
C L O C K  
6
AM  
O N T I M E  
O F F T I M E  
S L E E P  
AM  
OFF  
Press Up and Down buttons to set to  
“30”.  
S E L E C T  
M O V E  
M E N U  
T I M E  
3 0  
C L O C K  
6
PM  
Press Left and Right buttons to move to  
“AM/PM”.  
O N T I M E  
O F F T I M E  
S L E E P  
PM  
OFF  
S E L E C T  
M O V E  
M E N U  
Press Up and Down buttons to set to  
“PM”.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
When the power supply(AC main power) is cut off, the clock is reset to the value before the Time set.  
Press the Right button and then go to step 10 if you need to set on time.  
How to Set On Time  
This function allows you to automatically turn on your PDP at the preset time.  
Ex) To set to 7:20 AM,  
Press Up and Down buttons to move to  
“ON TIME”.  
T I M E  
3 0  
10  
C L O C K  
6
PM  
O N T I M E  
O F F T I M E  
S L E E P  
PM  
O F F  
OFF  
Press Left and Right buttons to select  
“ON TIME”.  
On Time menu appears.  
11  
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“TIME” to move to “HOUR”.  
O N T I M E  
7
T I M E  
AM  
2
O F F  
0 1 0  
12  
C H A N N E L  
V O L U M E  
Press Up and Down buttons to set to  
“7”.  
S E L E C T  
M O V E  
M E N U  
13  
Press Left and Right buttons to move to  
“MINUTE” unit.  
O N T I M E  
2 0  
T I M E  
7
AM  
2
O F F  
0 1 0  
14  
C H A N N E L  
V O L U M E  
Press Up and Down buttons to set to  
“20”.  
S E L E C T  
M O V E  
M E N U  
15  
Press Left and Right buttons to move to  
“AM/PM”.  
O N T I M E  
T I M E  
0 7  
2 0  
AM  
2
O F F  
0 1 0  
C H A N N E L  
V O L U M E  
16  
Press Up and Down buttons to set to  
“AM”.  
S E L E C T  
M O V E  
M E N U  
17  
Continued on next page ......  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
...... Continued from previous page. (Set the volume level and channel at the time when your PDP turns on.)  
Press Left and Right button to move to  
“ON/OFF”.  
O N T I M E  
18  
T I M E  
7
2 0  
AM  
2
O N  
0 1 0  
C H A N N E L  
V O L U M E  
Press Up and Down buttons to set to  
“ON”.  
19  
S E L E C T  
M O V E  
M E N U  
Press the Right button and then go to step 20  
if you need to set the Channel/Volume.  
O N T I M E  
2 0  
T I M E  
7
AM  
2
O N  
0 1 0  
C H A N N E L  
V O L U M E  
Press Up and Down buttons to move to  
“CHANNEL”.  
S E L E C T  
M O V E  
M E N U  
20  
21  
22  
23  
O N T I M E  
2 0  
Press Left and Right buttons to set to  
“Channel”.  
T I M E  
7
AM  
15  
O N  
0 1 0  
C H A N N E L  
V O L U M E  
Press Up and Down buttons to move to  
“VOLUME”.  
S E L E C T  
M O V E  
M E N U  
O N T I M E  
2 0  
T I M E  
7
AM  
15  
O N  
0 2 5  
Press Left and Right buttons to adjust.  
C H A N N E L  
V O L U M E  
Press MENU button after the setting is done,  
and Menu goes to the previous menu.  
S E L E C T  
M O V E  
M E N U  
EXIT  
If the EXIT button is pressed, the menu disappears.  
Regardless of which Input Mode you set On Time in, your PDP will turn on in TV Mode only.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set Off Time  
This function allows you to automatically turn off your PDP at the preset time.  
Ex) To set to 11:30 PM,  
Press Menu button.  
MENU  
T I M E  
3 0  
C L O C K  
6
PM  
Menu items appear on the screen.  
O N T I M E  
O F F T I M E  
S L E E P  
AM  
O F F  
O F F  
O F F  
O F F  
O F F  
OFF  
Press Up and Down buttons to move to  
“TIME” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“TIME”.  
T I M E  
3 0  
C L O C K  
6
PM  
2
O N T I M E  
O F F T I M E  
S L E E P  
AM  
OFF  
Press Up and Down buttons to move to  
“OFF TIME”.  
S E L E C T  
M O V E  
M E N U  
3
T I M E  
3 0  
Press Left and Right buttons to select  
“OFF TIME” to move to “HOUR” unit.  
C L O C K  
6
PM  
4
O N T I M E  
O F F T I M E  
S L E E P  
11  
AM  
OFF  
Press Up and Down buttons to set to  
“11”.  
S E L E C T  
M O V E  
M E N U  
5
T I M E  
Press Left and Right buttons to move to  
“MINUTE” unit.  
C L O C K  
6
3 0  
PM  
O N T I M E  
O F F T I M E  
S L E E P  
6
11 3 0  
AM  
OFF  
Press Up and Down buttons to set to  
“30”.  
S E L E C T  
M O V E  
M E N U  
7
T I M E  
Press Left and Right buttons to move to  
“AM/PM”.  
C L O C K  
6
3 0  
PM  
O N T I M E  
O F F T I M E  
S L E E P  
8
11 3 0  
PM  
OFF  
S E L E C T  
M O V E  
M E N U  
Press Up and Down buttons to set to  
9
“PM”.  
Continued on next page ......  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
...... Continued from previous page.  
Press Left and Right button to move to  
“ON/OFF”.  
T I M E  
10  
11  
C L O C K  
6
3 0  
PM  
O N T I M E  
O F F T I M E  
S L E E P  
11 3 0  
PM  
O N  
OFF  
Press Up and Down buttons to set to  
“ON”.  
S E L E C T  
M O V E  
M E N U  
Press MENU button after the setting is done, and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
EXIT  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
How to Set Sleep Time  
This function allows you to automatically turn off your PDP after a designated amount of time.  
Press Menu button.  
Menu items appear on the screen.  
T I M E  
MENU  
C L O C K  
6
3 0  
PM  
O N T I M E  
O F F T I M E  
S L E E P  
11 3 0  
AM  
O N  
OFF  
Press Up and Down buttons to move to  
“TIME” icon.  
1
S E L E C T  
M O V E  
M E N U  
Press Left and Right buttons to select  
“TIME”.  
T I M E  
C L O C K  
6
3 0  
PM  
2
O N T I M E  
O F F T I M E  
S L E E P  
11 3 0  
AM  
O N  
OFF  
Press Up and Down buttons to move to  
“SLEEP”.  
S E L E C T  
M O V E  
M E N U  
3
Press Left and Right buttons, then the menu  
changes in order below. (Unit : Minute)  
T I M E  
C L O C K  
6
3 0  
PM  
O N T I M E  
4
O F F T I M E  
11 3 0  
AM  
30  
O N  
S L E E P  
OFF 30 60 90 120 240  
Press MENU button after the setting is done,  
S E L E C T  
M O V E  
M E N U  
EXIT  
and Menu goes to the previous menu.  
If the EXIT button is pressed, the menu disappears.  
SLEEP  
How To Directly Start Sleep : Press  
button.  
Press sleep button, then the setting changes in order below. (Unit : Minute)  
OFF 30 60 90 120 240  
One minute before the preset Sleep Time, “Power off in a minute” message will appear.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Appendix  
Glossary .................................................................................. 85  
Troubleshooting ...................................................................... 87  
Cleaning and Caring .............................................................. 89  
Product Specifications ............................................................ 90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Component video Component video is sent through three cables: two color shade (chrominance) signals  
and one brightness (luminance) signal. Component video achieves greater color  
accuracy than composite video or S-VIDEO by splitting chrominance into two separate  
portions.  
Composite video Composite video is sent through a single cable. Composite video combines the color  
shade (chrominance) and brightness (luminance) information into one video signal.  
S-VIDEO S VIDEO requires a single cable, which carries the brightness (luminance) and color  
(chrominance) signals of the picture separately. S-VIDEO provides better resolution  
than composite video, which carries the signals together.  
Full Scart  
SCART connectors used with many European video equipments is designed to carry  
composite video and RGB video signals. If the equipment which outputs picture  
outputs RGB-signal, it will output RGB signal from the RGB pins and a complete  
composite video signal at the same time.  
Half Scart  
480i  
Basically is the same as Full Scart in function but does not support RGB Video signals.  
Provides 480 lines of resolution. Displays images using interlaced scanning, which first  
transmits all the odd lines on the TV screen and then the even lines.  
480p Provides 480 lines of resolution. Displays images using progressive scanning, which  
transmits each line from top to bottom.  
720p Provides 720 lines of resolution. Displays images using progressive scanning, which  
transmits each line from top to bottom.  
1080i  
Provides 1080 lines of resolution. Displays images using interlaced scanning, which  
first transmits all the odd lines on the TV screen and then the even lines. 1080i is one  
of the formats used by HDTV (High Definition TV).  
Digital television (DTV) A new technology for transmitting and receiving broadcast television signals. DTV  
provides higher resolution and improved sound quality over analog television.  
HDTV(High Definition TV) HDTV is a new kind of digital TV, creating a high quality picture, high definition. The  
HDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 480p or  
higher.  
SDTV(Standard Definition TV) SDTV is a new kind of standard definition digital TV, having a range of lower resolution  
than the HDTV. Supports 480i.  
Satellite Broadcasting  
Provides crisp picture and clear audio quality throughout the country via a satellite.  
Cable Broadcast Receiver A device that receives cable broadcasting. Connecting it to your TV set allows you to  
watch a various channels.  
(Converter)  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300  
megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300  
to 3,000 megahertz.  
DVD DVD (digital versatile disc) is an optical disc that can store a huge volume of  
multimedia such as video, game, and audio application, etc.  
DVI DVI (Digital Visual Interface) is a specification for digital signals. This interface using  
TMDS transmission reduces the loss of signal, allowing to enjoy a clear and crisp  
image. There are DVI-D connection, designed for digital signals, and DVI-I connection,  
designed for both analog and digital signals.  
Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV  
antenna.  
LNA (Low-Noise-Amplifier) Satellite applied technology. It is capable of amplifying weak signals so that any area  
experiencing a signal interruption may enjoy a clearer picture quality.  
Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9  
(widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.  
PIP (Simultaneous Screen) PIP allows you to view two images at the same time in a single screen.  
SWAP PIP function provides a main picture (larger image) and sub-picture (smaller image).  
The SWAP is designed to swap the sub-picture for the main picture. For example,  
while you are watching a main picture on TV and watching a sub-picture on VCR, you  
can instantly switch the two pictures by using the SWAP function.  
Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie-  
Mild-User features in order. “User Control” allows you to adjust Contrast, Brightness,  
Sharpness, Color and Tint.  
Sound Mode Sound Mode features the optimal sound quality. There are Standard-Music-Movie-  
News-User features in order. “User Control” allows you to adjust high frequency  
sound, middle frequency sound and low frequency sound.  
Channel Tuning The feature allows you to enjoy optimal broadcasting. This product provides automatic  
tuning feature for the best broadcasting status. You can tune the channels manually.  
SRS WOW A well-recognized 3D sound technology developed by US SRS Labs, Inc. This  
technology delivers the ultimate audio experience only with two speakers as if through  
multi-channel speakers.  
Subwoofer Output  
Designed to improve ultra low frequency with about 150Hz. Installation of a sub woofer  
with a built-in amplifier is necessary.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Installation Problems  
Symptom  
Possible solution  
How can I install an  
antenna?  
Refer to pages 23~24.  
TV screen is not clear after  
installing an indoors  
antenna.  
Indoors antenna may experience poor reception due to surrounding buildings. Please  
install an outdoors antenna or wireless antenna.  
How can I view cable  
broadcasting?  
Please install a cable broadcasting receiver (Converter).  
Picture Problems  
Symptom  
Possible solution  
Neither picture nor  
sound comes up.  
Check whether power is on.  
Check whether the power is cut or whether power cord is properly connected.  
Try to plug another product’s power cord to the outlet the PDP is plugged into.  
Picture turns on slowly  
after power is on.  
This symptom is not a malfunction. This delay is designed to prevent the distorted and  
noisy picture when power is on. However, if the picture does not appear more than 5  
minutes after power is on, call a service center.  
Vertical and horizontal lines  
and web patterns briefly  
appear on the  
This symptom may be caused by interference from other electric appliances. Please  
avoid using a cordless phone, hairdryer, and electric drill, etc.  
picture and shake.  
Input Source information  
only appears on black  
screen.  
Check whether your TV is properly connected to external devices.  
Poor reception on some  
channels.  
Check whether you selected proper channels. Try re-orienting your antenna. Ensure  
LNA is activated.  
Black and white on some  
channels.  
Check other channels for black and white screen. Adjust colour.  
TV won’t turn on.  
Ensure the power cord is plugged.  
Adjust brightness.  
Screen is too bright or too  
dark.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Auto On does not work.  
Ensure to use the remote control or power button on the product to turn off your TV. If  
you unplug the power cord, the stand-by consumption power becomes 0 (zero), which  
causes the programmed time to be erased.  
After setting the time,  
I turned TV off and turn it on.  
The programmed information  
has been erased.  
Ensure to use the remote control or power button on the product to turn off your TV. If  
you unplug the power cord, the stand-by consumption power becomes 0 (zero), which  
causes the programmed time to be erased.  
Sound Problems  
Symptom  
Possible solution  
Too much noise occurs.  
Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound  
may be distorted in the area where experiences poor reception or is located far away  
from a TV broadcasting station.  
No sound while viewing a  
cable channel  
Make sure an audio or audio/video component is securely inserted into the appropriate  
jacks. Check other channels for sound. Check the volume settings on the cable  
broadcasting receiver.  
Picture is OK but sound does  
not come out.  
Try to press volume up/volume down buttons of your remote control.  
One of the speakers does not  
produce sound.  
Select sound balance and make proper adjustment. (Page 48)  
Check the speaker connection cables.  
General  
Symptom  
Possible solution  
Remote control won't work.  
Check whether there is a blocking object between the remote control and PDP.  
Make sure your PDP is Power On. (In case of normal, LED on the front panel is in Red.)  
Check whether batteries are inserted with proper polarities(+, -).  
When the batteries are worn out, replace with new ones.  
Connect the two Audio jacks from the S-Video cable to the left and right ports on the  
Composite.  
Where does the S-Video  
cable plug in for audio  
output?  
Ticking noise during or after watching is caused by the change of ambient  
environment such as humidity and temperature, which is characterized by plastic  
products. Strange ticking noise occurs because a signal is suddenly transmitted to the  
PDP panel. So, this is not a malfunction.  
Strange noises are heard.  
Adjust the resolution referring to the standard signal mode table. Check the  
specification of your video card installed in your PC. If your video card does not work in  
supported hardware. Try upgrading the video card’s driver.  
I tried to use the TV screen  
as a PC monitor  
but it doesn’t work.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Cabinet Cleaning  
Wipe a soft dry cloth.  
Do not use inflammables like Benzene or Thinner, or wet clothes.  
Do not scratch the panel of PDP with a fingernail or pointed object.  
Screen Cleaning  
Clean the screen with a soft cloth moistened in mild glass  
detergent and dry with a soft cloth.  
Never use any solvent on the screen such as Acetone, Benzene, or  
Thinner, etc.  
Cleaning Inside  
When the inside needs to be cleaned, contact a service center or  
distribution agent where the item is purchased.  
It is recommended cleaning is complete before the rainy season.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
Product Specifications  
Display (PDP TV)  
MODEL  
Pixel  
HQP421SR  
HQP421HR  
HQP501HR  
1366(H) x 768(V)  
1208 mm  
724 mm  
852(H) x 480(V)  
1024(H) x 768(V)  
Width  
1030 mm  
631 mm  
717 mm  
79 mm  
32 kg  
Height (Excluding stand)  
Height (Including stand)  
Depth  
809.5 mm  
79 mm  
Weight (With Package)  
Weight (Net Product)  
Power  
54 kg  
26 kg  
43 kg  
100 - 240V AC 50/60Hz  
Colors  
16,770,000 colors(256 colors for each R, G, B )  
Use Temperature  
Use Humidity  
TV  
00~400C  
Below 80%  
2-Tuner Bulit In  
Speaker (Optional)  
MODEL  
Dimensions(WxDxH)  
Weight  
PD421S  
P501S  
120 x 79 x 724 mm  
1.5 kg x 2  
120 x 79 x 631 mm  
2 kg x 2  
Type  
2 way 6 speaker system  
Base Reflex Type  
8
Cabinet  
Impedance  
Rated 8W (RMS)  
Allowable Input  
Max. 10W(Music Peak Power)  
120Hz ~ 20,000Hz (-10dB)  
87dB/W/m  
Frequency Response  
Output Sound Pressure  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Component Video Signal Format  
If PDP cannot reproduce proper video image, it's necessary to select a specific component video signal format among the  
below.  
- DVD : 480i / 480p / 720p / 1080i  
- DTV (Digital Broadcast) : 480p / 720p / 1080i  
- All signals are available for 60Hz.  
PDP couldn't display proper video image in case of different output signal from the specifiation that PDP supports.  
(The below specification table) Then, please adjust the output signal setting from the appliances.  
Or when you would like to purchase PDP & the appliances like SETTOP BOX or DVD, please check the compatibility  
between the input signal of PDP and the output signal of the appliances.  
• Component Input Specification  
Signal Name  
720 x 483  
Horizontal Frequency (KHz) Vertical Frequency (KHz)  
Remarks  
15.75  
15.734  
15.75  
15.734  
15.75  
15.734  
31.5  
60  
59.94  
60  
DVD input  
480 60i  
480 60i  
480 60i  
480 60p  
480 60p  
480 60p  
720 60p  
1080 60i  
720 x 486  
640 x 480  
59.94  
60  
59.94  
60  
DVD input  
DTV Input  
720 x 483  
720 x 486  
640 x 480  
31.469  
31.5  
59.94  
60  
31.469  
31.5  
59.94  
60  
31.469  
45  
59.94  
60  
1280 x 720  
44.955  
33.75  
33.716  
59.94  
60  
1920 x 1080  
59.94  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
MEMO  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HYUNDAI Plasma Display  
MEMO  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  

GSW Water Heater JW317 User Manual
Halo Lighting System Indoor Furnishings L10530 User Manual
Harbor Freight Tools Food Saver 66906 User Manual
Harbor Freight Tools Grinder 95578 User Manual
Honeywell Thermostat 7351F User Manual
HP Hewlett Packard All in One Printer MFP M175 User Manual
HP Hewlett Packard Laptop 4415S User Manual
Husky Automobile Parts 647016 User Manual
Husqvarna Brush Cutter 524 L User Manual
Impex Home Gym IGS 05 User Manual