Hunter Fan Fan Type B Models User Manual

For Your Records and  
Warranty Assistance  
TypeT,G,B Models  
For reference, also attach your receipt or a copy  
of your receipt to the manual.  
Owners Guide and Installation Manual  
__________________________________________  
Model Name  
__________________________________________  
Model No.  
__________________________________________  
Catalog No.  
__________________________________________  
Date Purchased  
__________________________________________  
Where Purchased  
Form# 41847-01  
20090812  
©2009 Hunter Fan Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer’s Choice and Optional Accessories  
Understanding Mounting and Installer’s Choice®  
Support Brace  
Hunter’s patented 3-position mounting system provides you maximum  
installation flexibility and ease. You can install your Hunter fan in one  
of three ways, depending on ceiling height and your preference: Low  
Profile, Standard, or Angled mounting. e steps in this manual include  
instructions for all three Installer’s Choice mounting methods.  
Ceiling  
Outlet Box  
Standard  
Mounting  
Style  
Considering Optional Accessories  
Consider using Hunter’s optional accessories, including a wall-mounted  
or remote speed control. To install and use the accessories, follow  
the instructions included with each product. For quiet and optimum  
performance of your Hunter fan, use only Hunter speed controls.  
Standard Mounting hangs from the  
ceiling by a downrod (included).  
For ceilings higher than 8 feet, you can purchase  
Hunter extension downrods. All Hunter fans use  
sturdy 3/4” diameter pipe to assure stability and  
wobble-free performance.  
Support Brace  
Ceiling  
Outlet Box  
Support Brace  
8
CAUTION: To  
reduce the risk of  
personal injury, attach  
the fan directly to the  
12  
Angled  
Mounting  
Style  
support structure of  
the building according  
to these instructions,  
and use only the  
Low Profile  
Mounting  
Style  
Ceiling  
Outlet Box  
hardware supplied.  
Low Profile Mounting fits close to the  
ceiling, recommended for ceilings less  
than 8 feet high  
Angled Mounting recommended for a  
vaulted or angled ceiling  
3
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 • Getting Ready  
To install a ceiling fan, be sure you can do the following:  
• Locate the ceiling joist or other suitable support in ceiling.  
• Drill holes for and install wood screws.  
• Identify and connect electrical wires.  
• Lift 40 pounds.  
If you need help installing the fan, your Hunter fan dealer can direct  
you to a licensed installer or electrician.  
Gathering the Tools  
You will need the following tools for installing the fan:  
• Electric drill with 9/64” bit  
• Standard screwdriver (magnetic tip recommended)  
• Phillips-head screwdriver (magnetic tip recommended)  
• Wrench or pliers  
• Ladder (height dependent upon installation site)  
Installing Multiple Fans?  
If you are installing more than  
one fan, keep the fan blades and  
blade irons (if applicable) in sets,  
as they were shipped.  
Checking Your Fan Parts  
Carefully unpack your fan to avoid damage to the fan parts. Refer to  
the included Parts Guide. Check for any shipping damage to the motor  
or fan blades. If any parts are missing or damaged, contact your Hunter  
dealer or call Hunter Technical Support Department at 888-830-1326.  
Preparing the Fan Site  
Before you begin installing the fan, follow all the instructions in  
the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan  
location and attachment to the building structure are essential for  
safety, reliable operation, maximum efficiency, and energy savings.  
4
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 • Installing the Ceiling Plate  
CAUTION: To avoid possible electrical shock, before installing your fan,  
Isolator  
disconnect the power by turning off the circuit breakers to the outlet box  
and associated wall switch location. If you cannot lock the circuit breakers  
in the off position, securely fasten a prominent warning device, such as a  
tag, to the service panel.  
Ceiling  
Plate  
2-1. Drill two pilot holes into the wood support structure through the  
outermost holes in the outlet box. e pilot holes should be 9/64”  
in diameter.  
Step 2-2  
2-2. Your fan comes with four neoprene noise isolators (“Isolators”).  
Position the isolators between the ceiling plate and ceiling by  
inserting the raised areas on each isolator into the holes in the  
ceiling plate.  
2-3. read the lead wires from the outlet box down through the hole  
in the middle of the ceiling plate.  
2-4. Align the slotted holes in the ceiling plate with the pilot holes you  
drilled in the wood support structure. For proper alignment use  
slotted holes directly across from each other.  
Note: e isolators should be flush against the ceiling.  
2-5. Place a flat washer on each of the two 3” wood screws and pass  
the screws through the slotted holes in the ceiling plate into the  
pilot holes you drilled.  
Steps 2-3 – 2-5  
Tighten the screws into the 9/64” pilot holes; do not use lubricants  
on the screws. Do not over tighten.  
Flat Washer  
3” Wood Screw  
For Angled Ceilings: Be sure to  
orient the ceiling plate so that the  
arrows printed on the ceiling plate are  
pointing toward the ceiling peak.  
5
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 • Assembling and Hanging the Fan  
Steps 3-2 – 3-3  
WARNING: Fan may fall if not assembled as directed in these  
installation instructions.  
Downrod  
3-1. Unbundle the wires from the fan.  
For Standard or Angled mounting:  
3-2. To assemble fan to hang down from a flat or angled ceiling, insert  
the downrod through the canopy and canopy trim ring. Feed the  
wires from the fan through the downrod.  
Canopy  
Canopy  
3-3. Loosen the square head setscrew on the adapter to install the pipe  
and ball assembly. Note: When the pipe and ball assembly is fully  
installed, 2-3 threads on the pipe will still be visible; this is normal.  
Securely retighten the setscrew with a wrench or pliers. Skip to  
Step 3-7.  
Trim Ring  
Setscrew  
Steps 3-5 – 3-6  
CAUTION: e adapter has a special coating on the threads. Do  
not remove this coating; the coating prevents the downrod from  
Low Profile Washer  
unscrewing. Once assembled, do not remove the downrod.  
For Low Profile mounting:  
Note: For low profile mounting, the downrod is replaced with the low  
profile washer.  
3-4. Remove the setscrew from the adapter.  
3-5. Place the low profile washer (lip up) into the canopy. Be sure the  
green ground wire is pointing up toward the ceiling.  
3-6. Align the holes in the washer with the holes in the adapter.  
Assemble securely with three low profile screws.  
3-7. Raise the fan and place the hook on the ceiling plate through the  
U-shaped hole in the rim.  
Low Profile Screw  
Step 3-7  
U-shaped  
Hole  
6
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
fsdfsdf  
4 • Wiring the Fan  
All wiring must be in accordance with national and local electrical  
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a  
qualified electrician.  
Wire  
Connector  
Wall switches are not included. Select an acceptable general-use switch  
in accordance with national and local electrical codes.  
4-1. Before attempting installation, make sure the power is still off.  
Dual Switch Wiring  
4-2. To connect the wires, hold the bare metal leads together and place  
a wire connector over them, then twist clockwise until tight. For  
all these connections use the wire connectors provided.  
4-3. Connect the bare or green ground wire (grounded) from the  
ceiling to the green ground wire (grounded) from the ceiling plate  
and the green ground wire from the fan.  
4-4. Connect the white wire (ungrounded) from the ceiling to the  
white wire (ungrounded) from the fan.  
4-5. Connect the remaining wires as follows:  
Dual Switch Wiring:  
• e black wire (ungrounded) from the ceiling to the black wire  
(ungrounded) from the fan  
• e black/white wire (ungrounded) from the fan to the wire  
(ungrounded) for the wall switch  
Single Switch Wiring  
Single Switch Wiring:  
• e black wire (ungrounded) from the ceiling to the black  
(ungrounded) and the black/white wire (ungrounded) from  
the fan  
CAUTION: Be sure no bare wire or wire strands are visible after  
making connections.  
4-6. Turn the splices upward and push them carefully back through the  
ceiling plate into the outlet box.  
4-7. Spread the wires apart, with the grounded wires on one side of  
the outlet box and the ungrounded wires on the other side of the  
outlet box.  
7
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 • Installing the Canopy and Canopy Trim Ring  
Step 5-2  
Ceiling Plate  
5-1. Holding the canopy, raise the fan off the hook.  
5-2. Align the slots in the canopy with the tabs on the ceiling plate.  
5-3. Raise the canopy over the ceiling plate. Rotate the canopy  
clockwise until the tabs on the ceiling plate totally engage with  
the slots in the canopy.  
5-4. Partially install the three canopy screws into the canopy one at a  
time. Once all three screws are in, tighten them.  
Canopy Trim  
Ring  
Canopy  
5-5. Using both hands, push the canopy trim ring up to the top of the  
canopy. e canopy trim ring will snap and lock into place.  
Should you need to remove the canopy  
trim ring, follow these steps:  
1. Locate the tab indicators, small  
bumps on top of tabs.  
2. Press firmly on opposite sides of the  
ring toward the canopy. e tabs will  
flex out releasing the trim ring from  
the canopy.  
Step 5-3  
Steps 5-4 – 5-5  
Canopy  
Screw  
8
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 • Assembling the Blades  
Hunter fans use several styles of fan blade irons (brackets that hold the  
blade to the fan).  
6-1. Your fan may include blade grommets. If your fan has grommets,  
insert them by hand into the holes on the blades.  
Step 6-1 (Detail)  
6-2. Attach each blade to a blade iron using three blade assembly  
screws. If you used grommets, the blades may appear slightly loose  
after screws are tightened. is is normal.  
6-3. Remove the blade mounting screws and rubber shipping bumpers  
from the motor. Note: Some blade mounting screws are installed  
in the motor to secure shipping blocks.  
6-4. For each blade, insert one blade mounting screw through the  
blade iron, and attach lightly to the fan. Insert the second blade  
mounting screw, then securely tighten both mounting screws.  
Grommet  
Steps 6-1 – 6-2  
Blade Assembly  
Screws  
Use with grommet  
Use without grommet  
Blade  
Mounting  
Screw  
Step 6-4  
9
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture  
Your Hunter fan comes with an integrated light fixture assembly and  
an optional switch housing cap and plug button. is feature gives  
you the option of installing the fan with OR without the included light  
fixture. e steps below direct you whether or not you are installing a  
light fixture.  
.WARNING: Use only the light fixture supplied with this fan model.  
7-1. To attach the upper switch housing, partially install two housing  
assembly screws into the switch housing mounting plate.  
7-2. Feed the upper plug connector through the center opening of the  
housing.  
7-3. Align the keyhole slots in the housing with the housing assembly  
Steps 7-1 – 7-3  
screws.  
Housing  
Assembly  
Screw  
Upper  
Switch  
Housing  
7-4. Turn the housing counterclockwise until the housing assembly  
screws are firmly situated in the narrow end of the keyhole slots.  
Install the remaining screw into the housing. Tighten all three  
screws firmly.  
. . . .CAUTION: Make sure the upper switch housing is securely  
attached to the switch housing mounting plate. Failure to properly  
attach and tighten all three assembly screws could result in the  
switch housing and light fixture falling.  
7-5 . If you do not want to install the light fixture, proceed with step  
7-6 now.  
. . If you want to install the light fixture, proceed to “Installing  
the Light Fixture” on page 12. Once you have installed the light  
fixture, continue with step 7-6.  
. .  
10  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)  
7-6. To attach the lower switch housing, connect the upper plug  
connector from the motor to the lower plug connector in the  
lower switch housing assembly.  
. . Note: Both plug connectors are polarized and will only fit together  
Plug  
Connector  
one way. Make sure the connectors are properly aligned before  
connecting them. Incorrect connection could cause improper  
operation and damage to the product.  
7-7. Place the lower switch housing assembly over the upper switch  
housing. Align the side screw holes in the upper and lower switch  
housings. Attach the lower switch housing to the upper switch  
housing with three housing assembly screws.  
Steps 7-6 – 7-7  
Lower Switch  
Housing  
. . If you are not installing the light fixture, your installation is  
complete. Otherwise, proceed with step 7-8.  
Plug  
Connector  
Detail  
7-8. e last installation step when installing the light fixture is to  
install the glass bowl. See “Installing the Glass Bowl” on page 13 for  
instructions.  
Housing  
Assembly Screw  
11  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)  
Installing the Light Fixture  
7-9. Remove the switch housing cap and plug button from the lower  
switch housing.  
7-10. Push the wires from the light kit through the hole in the  
center of the lower switch housing.  
7-11. Screw the threaded rod of the light fixture into the lower  
Lower Switch  
switch housing.  
Housing  
7-12. Install the nut and washer from the end of the light fixture  
inside the lower switch housing.  
7-13. Remove the wire connectors from the white wire and the  
red wire in the lower switch housing.  
readed Rod  
CAUTION: Be sure no bare wires or wire strands are visible  
after making connections.  
7-14. Connect the white wire from the lower switch housing to  
the white wire from the light fixture.  
7-15. Connect the red wire from the lower switch housing to the  
black wire from the light kit fixture.  
Note: In compliance with US federal energy regulations, this  
ceiling fan contains a device that restricts the light kit to a  
maximum of 190 Watts. Exceeding that limit or the marked  
limit on this product may result in fire hazard or improper  
operation.  
Cap  
Plug Button  
12  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)  
Installing the Glass Bowl  
7-16. First install B10 candelabra bulbs (60 Watt Maximum) into the  
sockets.  
7-17. Attach the extra pull chain (included) to the fan pull chain using  
the plastic breakaway connector. (You may find the plastic  
breakaway connector on the end of the extra chain.)  
7-18. read the fan pull chain through the hole in the metal disk. en,  
thread the fan pull chain through the hole in the center of the glass  
bowl.  
7-19. read the light pull chain through the hole in the center of the  
glass bowl. en, read the light pull chain throught the hole in  
the center of the cover plate.  
7-20. read the fan pull chain through the grommet hole in the side of  
the cover plate.  
7-21. Place the cover plate up against the  
glass bowl. Align the holes in the cover  
plate and glass bowl.  
7-22. read the light pull chain through  
the finial and screw the finial onto the  
threaded rod end until tight.  
Light Bulbs .  
(B10  
Candelabra  
Base 60 Watt  
Maximum)  
Metal Rod  
Metal Disk  
Glass Bowl  
Cover Plate  
Finial  
Breakaway  
Connector  
13  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 • Operating and Cleaning Your Ceiling Fan  
8-1. Turn on electrical power to the fan.  
8-2. e fan pull chain controls power to the fan. e pull chain has  
four settings in sequence: High, Medium, Low, and Off.  
• Pull the chain slowly to change settings.  
• Release slowly to prevent the chain from recoiling into the  
blades.  
• e chain uses a breakaway connector that separates if the  
chain is jerked. If this happens, simply reinsert the chain into  
the connector.  
8-3. e light pull chain controls the power to the light fixture. e  
chain has two settings: ON and OFF.  
In warm weather, use  
downward air flow pattern  
8-4 . Ceiling fans work best by blowing air downward (counterclockwise  
blade rotation) in warm weather to cool the room with a direct  
breeze. In winter, having the fan draw air upward (clockwise blade  
rotation) will distribute the warmer air trapped at the ceiling  
around the room without causing a draft.  
8-5. For cleaning finishes, use a soft brush or lint-free cloth to prevent  
scratching. A vacuum cleaner brush nozzle can remove heavier  
dust. Remove surface smudges or accumulated dirt and dust using  
a mild detergent and a slightly dampened cloth. You may use  
an artistic agent, but never abrasive cleaning agents as they will  
damage the finish.  
8-6. Clean wood finish blades with a furniture polishing cloth.  
Occasionally, apply a light coat of furniture polish for added  
protection and beauty. Clean painted and high-gloss blades in the  
same manner as the fan finish.  
In cold weather, use upward  
air flow pattern  
To Change Airflow Direction  
Turn the fan off and let it come to a complete  
stop. Slide the reversing switch on the fan to the  
opposite position. Restart fan.  
Reversing  
Switch  
14  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 • Troubleshooting  
Problem: Nothing happens; fan does not move.  
1. Turn power on, replace fuse, or reset breaker.  
2. Loosen canopy, check all connections according to the wiring the  
fan section.  
3. Check the plug connection in the switch housing.  
4. Push motor reversing switch firmly left or right to ensure that the  
switch is engaged.  
5. Pull the pull chain to ensure it is on.  
6. Remove the shipping bumpers.  
Problem: Noisy operation.  
1. Tighten the blade assembly screws and blade iron armature screws  
until snug.  
2. Check to see if the blade is cracked. If so, replace all the blades.  
Problem: Excessive wobbling.  
1. If your fan wobbles when operating, use the enclosed balancing kit  
and instructions to balance the fan.  
2. Tighten all blade iron screws.  
3. Turn power off, support fan very carefully, and check that the  
hanger ball is properly seated.  
Problem: Lights dim when turned on or do not turn on  
1. Check to make sure the wattage and type of light bulbs installed  
match the specifications on the light socket.  
Problem: Lights shut off suddenly  
1. Turn the power to the fan off at the wall switch. Wait 30 seconds,  
then resume power to the fan.  
If you need parts or service assistance, please call  
888-830-1326 or visit us at our Website at .  
Hunter Fan Company  
7130 Goodlett Farms Pkwy. #400  
Memphis, Tennessee 38016  
15  
41847-01 • 08/12/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Automobile Parts 205394 Series E User Manual
HANNspree Flat Panel Television F621 15C1 User Manual
Hans Grohe Plumbing Product 32240XX1 User Manual
Harman Kardon Microphone CBL 410 PCC User Manual
Hasbro Motorized Toy Car 09039 User Manual
Heatiator Indoor Fireplace GC150 User Manual
Hoshizaki Ice Maker KM 250BAF User Manual
HP Hewlett Packard Network Card HP A6828A User Manual
Husqvarna Chainsaw 1151438 95 User Manual
Husqvarna Snow Blower EU1130STE User Manual