Model No. HREL3226.0
Serial No.
USER'S MANUAL
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if parts are damaged, PLEASE
DO NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
CALL TOLL-FREE:
1-888-922-4222
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. Sears assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exer-
ciser. Always wear athletic shoes for foot
protection.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using your elliptical exerciser.
3. Your elliptical exerciser is intended for home
use only. Do not use your elliptical exerciser
in a commercial, rental, or institutional set-
ting.
10. Keep your back straight while using your
elliptical exerciser; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the user’s move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place your elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around your elliptical exerciser to mount,
dismount, and use it.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
13. If you feel pain or dizziness while exercising,
stop immediately and cool down.
6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.
14. Use your elliptical exerciser only as
described in this manual.
7. Your elliptical exerciser should not be used
by persons weighing more than 250 lbs.
(113 kg).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the new HEALTHRIDER
®
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
H 300 elliptical exerciser. The HEALTHRIDER H 300
is an incredibly smooth exerciser that moves your feet
in a natural elliptical path, minimizing the impact on
your knees and ankles. Welcome to a whole new
world of natural, elliptical-motion exercise.
To avoid a registration fee for any service needed
under warranty, you must register the elliptical
tion.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before con-
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Upper Body Arm
Fan
Console
Water Bottle Holder*
Arm Knob
Upright
Pedal Arm
Wheel
Side Shield
Pedal Disc
Pedal
*No water bottle is included
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own Phillips screwdriver
adjustable wrench , and rubber mallet
,
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M8 Split
M8 Washer
(64)–4
M8 Large
M10 Split
Wave Washer
(27)–2
Large Wave
Washer (20)–4
Washer (79)–4
Washer (81)–2 Washer (78)–4
Star Washer M4 x 12mm Flat
M4 x 16mm
M4 x 19mm
M4 x 22mm
M4 x 32mm
(85)–6
Head Screw (88)–8 Screw (60)–4 Screw (68)–6 Screw (66)–2
Screw (67)–8
M8 Nylon
M10 Nylon
M8 x 19mm Patch
Screw (73)–4
M8 x 25mm Patch
Screw (70)–2
M8 x 23mm Button
Screw (65)–4
Locknut (59)–2
Locknut (84)–4
M10 x 60mm Button Screw (89)–2
M10 x 76mm Button Bolt (74)–2
M10 x 75mm Carriage Bolt (58)–2
M10 x 50mm Carriage Bolt (75)–2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
1
To make assembly easier, read the information
on page 5 before you begin assembling the
elliptical exerciser.
58
36
1
Attach the Rear Stabilizer (35) to the Frame (1) with
two M10 x 75mm Carriage Bolts (58) and two M10
Nylon Locknuts (84).
35
36
Press the Stabilizer Endcaps (36) onto the Rear
Stabilizer (35) as shown.
84
2. Attach the Front Stabilizer (3) to the Frame (1) with
two M10 x 76mm Button Bolts (74), two M10 Split
Washers (78), two Concave Spacers (90), and two
M10 Nylon Locknuts (84). Do not tighten the
Nylon Locknuts yet.
2
28
Posts
Thread two M10 x 60mm Button Screws (89) with
two M10 Split Washers (78) and two Concave
Spacers (90) through the Front Stabilizer (3) and
into the Frame (1). Tighten the two M10 Nylon
Locknuts (84), and then tighten the Button
Screws.
74
78
90
78
90
1
Orient a Wheel (28) so the four posts (see the inset
drawing) are facing away from the Front Stabilizer
(3). Attach the Wheel to the Front Stabilizer with an
M8 Nylon Locknut (59). Next, press a Wheel Cover
(29) onto the posts on the Wheel. Attach the other
Wheel (not shown) in the same way.
29
90
78
89
3
28
73
59
84
90
78
89
3. While another person holds the Upright (2) near the
Frame (1), connect the Upper Wire Harness (18) to
the Lower Wire Harness (38).
3
79
2
73
79
73
79
Carefully slide the Upright (2) onto the Frame (1).
Be careful to avoid pinching the Wire Harnesses
(18, 38). Attach the Upright with four M8 x 19mm
Patch Screws (73) and four M8 Split Washers (79).
Do not tighten the Patch Screws yet.
18
38
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Identify the Left Pedal Arm (21), which is marked
with a sticker. Attach a Pedal (19) to the Left Pedal
Arm with three M4 x 19mm Screws (68) and three
Star Washers (85).
4
19
21
Attach the other Pedal (not shown) to the Right
Pedal Arm (not shown) in the same way.
85
85
68
5. Apply a generous amount of grease to the Pivot Axle
(16). Then, apply a small amount of grease to two
Wave Washers (27).
5
65
18
14
Grease
64
While another person aligns the Upper Body Legs (6)
with the Upright (2) as shown, insert the Pivot Axle
(16) into the Upper Body Legs and the Upright. Be
careful not to damage the Upper Wire Harness
(18) with the Pivot Axle.
2
27
16
Grease
27
64
Place a Wave Washer (27) on each end of the Pivot
Axle (16). Then, tighten an M8 x 23mm Button
Screw (65), an M8 Washer (64), and a Pivot Cover
(14) into each end of the Pivot Axle.
6
14
6
65
6. Apply a generous amount of grease to the axle on
the left Upper Body Leg (6). Then, apply grease to a
Large Wave Washer (20) and slide it onto the axle.
6
6
Apply a generous amount of grease to the Left
Crank Arm (42). Then, slide a Crank Arm Spacer
(45) onto the Left Crank Arm. Make sure the flat
side of the Crank Arm Spacer is facing away from
the Left Crank Arm.
42
Grease
45
Grease
20
Slide the Left Pedal Arm (21) onto the left Upper
Body Leg (6) and onto the Left Crank Arm (42).
21
Repeat this step for the other side of the elliptical
exerciser.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Attach the Left Pedal Arm (21) to the left Upper
Body Arm (6) with an M8 x 23mm Button Screw
(65), an M8 Washer (64), and a Pedal Leg Cover
(23).
7
6
73
Apply grease to a Large Wave Washer (20) and
slide it onto the Left Crank Arm (42). Then, attach
the Left Pedal Arm (21) to the Left Crank Arm with
an M8 x 25mm Patch Screw (70) and an M8 Large
Washer (81).
21
64
23
Repeat this step for the other side of the elliptical
exerciser.
65
20
81
70
See step 3. Tighten the four M8 x 19mm Patch
Screws (73).
8. The Console (10) requires four “D” batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the elliptical exerciser has been
exposed to cold temperatures, allow it to warm
to room temperature before inserting batteries
into the Console. If you do not do this, the con-
sole displays or other electronic components
may become damaged. Remove the battery cover
from the Console. Insert four batteries into the
Console; make sure that the batteries are orient-
ed as shown by the diagram inside the battery
compartment. Then, reattach the battery cover.
8
Batteries
10
Battery
Cover
9. While another person holds the Console (10) near
the Upright (2), connect the Upper Wire Harness
(18) to the wire harness on the Console.
9
18
Attach the Console (10) to the Upright (2) with four
M4 x 16mm Screws (60). Be careful not to pinch
the wire harnesses.
10
Attach the Water Bottle Holder (17) to the Upright
(2) with two M4 x 22mm Screws (66).
60
17
60
2
66
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Orient a Left Upper Body Insert (12) and a Right
Upper Body Insert (13) as shown, and press them
together around the left Upper Body Leg (6). Next,
slide the Left Upper Body Arm (4) onto the Upper
Body Inserts.
10
While another person holds the Left Upper Body Arm
(4) and the Upper Body Inserts (12, 13), insert an
M10 x 50mm Carriage Bolt (75) through all three
parts from the inside as shown. Next, tighten four M4
x 32mm Screws (67) and four M4 x 12mm Flat Head
Screws (88) through the Left Upper Body Arm and
into the Upper Body Inserts. Then, tighten an Arm
Knob (11) onto the Carriage Bolt.
4
75
88
88
88
6
Attach the Right Upper Body Arm (not shown) to
the right Upper Body Leg (6) in the same way.
6
88
67
11
67
13
12
11. Make sure that all parts of the elliptical exerciser are properly tightened. Place a mat under the elliptical
exerciser to protect the floor or carpet from damage.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO MOVE AND LEVEL THE ELLIPTICAL
EXERCISER
HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
To move the elliptical exerciser, stand in front of it,
place one foot against one of the wheels, and firmly
hold the upper end of the upright. Pull the upright until
you can move the elliptical exerciser on the wheels.
Carefully move the elliptical exerciser to the desired
location and then lower it. To decrease the risk of
injury, do not attempt to move the elliptical exer-
ciser over an uneven surface.
To mount the elliptical exerciser, firmly hold the upper
body arms and carefully step onto the pedal that is in
the lowest position. Next, step onto the other pedal.
Push the pedals until they begin to move with a con-
tinuous motion. Note: The pedal discs can turn in
either direction. It is recommended that you turn
the pedal discs in the direction shown below;
however, for variety, you can turn the pedal discs
in the opposite direction.
Upper
Upright
Body Arm
Wheel
Pedal
Pedal
Disc
Leveling Foot
If the elliptical exerciser rocks slightly on your floor,
turn one or both of the leveling feet under the front
stabilizer until the rocking motion is eliminated.
HOW TO ADJUST THE POSITION OF THE
HANDLEBARS
The upper body arms can
be adjusted to the height
that is the most comfort-
able for you. To adjust
each upper body arm, first
loosen the arm knob.
To dismount the elliptical exerciser, allow the pedals to
come to a complete stop. The elliptical exerciser
does not have a freewheel; the pedals will contin-
ue to move until the flywheel stops. When the ped-
als are stationary, step off the highest pedal first.
Then, step off the lower pedal.
Next, slide the upper body
Upper
arm to the desired posi-
Body
tion, and then firmly
Arm
retighten the arm knob.
Make sure that both upper
Arm Knob
body arms are at the
same height.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
Fan
Program
Profiles
Increase
Button
Button
Program
Indicator
Pace
Program Button
Decrease
Button
Display
Guide
FEATURES OF THE CONSOLE
HOW TO USE THE MANUAL MODE
1. Turn on the console.
The advanced console offers a selection of features
designed to make your workouts more effective. When
you use the manual mode of the console, you can
change the resistance of the pedals with a touch of a
button. As you pedal, the console will provide continu-
ous exercise feedback. You can even measure your
heart rate using the handgrip pulse sensor.
To turn on the console, press the Increase or
Decrease button or begin pedaling. The pace
guide will light for a moment; the console will then
be ready for use.
2. Select the manual mode.
In addition, the console also features six preset pro-
grams that automatically change the resistance of the
pedals and prompt you to vary your pace while guiding
you through an effective workout.
When you turn on the console, the manual mode
will be selected. If you have selected a program,
reselect the manual mode by pressing the
Program button repeatedly until no program indi-
cators (see the drawing above) appear along the
left side of the display.
The console also offers two custom programs that allow
you to create your own workout programs and store
them in memory for future use.
3. Change the resistance of the pedals as
desired.
To use the manual mode of the console, see the
instructions at the right. To use a preset program, see
page 12. To create a custom program, see page 13.
To use a custom program, see page 14.
As you pedal,
change the resis-
tance of the pedals
Before using the console, make sure that batteries are
installed (see assembly step 8 on page 8). If there is a
sheet of clear plastic on the display, remove the plas-
tic.
by pressing the
Increase and
Decrease buttons.
There are twelve
resistance levels. Note: After you press the but-
tons, it will take a moment for the pedals to reach
the selected resistance level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Follow your progress with the display.
clean the metal contacts using a soft cloth; never
use alcohol, abrasives, or chemicals to clean
the contacts.
The upper half of
the display will
show the elapsed
6. Turn on the fan if desired.
time, the distance
(in total revolu-
The fan has high
Thumb
Tab
tions) you have
and low speed set-
tings. Press the
pedaled, and the
resistance level of
Fan button repeat-
edly to select a fan
speed or to turn off
the fan. Note: If the
pedals do not
the pedals. The display will change modes every
few seconds. Note: When a preset program is
selected, the display will show the time remaining
in the program instead of the elapsed time.
move for about
The lower half of
thirty seconds, the fan will turn off automatically.
the display will
show your pedal-
Rotate the thumb tab on the right side of the fan to
adjust the angle of the fan.
ing speed, in revo-
lutions per minute
(RPM), and the
7. When you are finished exercising, the console
will turn off automatically.
approximate num-
ber of calories you
have burned. The display will change modes every
few seconds. The lower half of the display will also
show your hear rate when you use the handgrip
pulse sensor (see step 5).
If the pedals do not move for several seconds, the
time will begin to flash in the display and the con-
sole will pause. If the pedals do not move for a
few minutes, the console will turn off and the dis-
play will be reset.
5. Measure your heart rate if desired.
If there are sheets
HOW TO USE A PRESET PROGRAM
Contacts
of clear plastic on
the metal con-
Preset programs 1 through 6 automatically change the
resistance of the pedals and prompt you to vary your
pedaling pace while guiding you through effective
workouts. The profiles printed on the left side of the
display show the resistance levels for each preset pro-
gram.
tacts on the hand-
grip pulse sensor,
remove the plas-
tic. To measure
your heart rate,
hold the handgrip pulse sensor with your palms
resting against the metal contacts. Avoid moving
your hands or gripping the contacts tightly.
Follow the steps below to use a preset program.
1. Turn on the console.
When your pulse is detected, the heart-shaped
indicator in thelower half of the display will flash
each time your heart beats, and then your heart
rate will appear in the display. For the most accu-
rate heart rate reading, hold the contacts for at least
15 seconds. Note: If you continue to hold the
handgrip pulse sensor, the display will show your
heart rate for up to 30 seconds. The display will
then show your heart rate along with the other
modes.
See step 1 on page 11.
2. Select a preset program.
To select a preset
program, press the
Program button
repeatedly until the
number 1, 2, 3, 4,
5, or 6 appears
If your heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
metal contacts tightly. For optimal performance,
along the left side
of the display.
When you select a preset program, the display will
show the duration of the program.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Begin pedaling to start the program.
HOW TO CREATE A CUSTOM PROGRAM
1. Turn on the console.
Each preset program consists of 20 or 30 one-
minute segments. One resistance level and one
target pace are programmed for each segment.
See step 1 on page 11.
At the end of each segment, the resistance level
will flash in the display for a few seconds. The
resistance of the pedals will then automatically
change to the resistance level programmed for the
next segment. Note: If the resistance level is too
low or too high, you can override it by pressing the
Increase and Decrease buttons. However, when
the current segment ends, the resistance will auto-
matically change to the resistance level pro-
grammed for the next segment.
2. Select a custom program.
To select a custom
program, press the
Program button
repeatedly until the
number 7 or 8
appears along the
left side of the dis-
play.
During the program, the
3. Begin pedaling to start the program, and pro-
gram the desired settings.
pace guide will prompt you
to increase or decrease
your pedaling pace. When
Each custom program is divided into 40 one-
minute segments. You can program one resistance
level and one target pace for each segment.
one of the two lower indi-
cators lights, increase your
pace; when one of the two
upper indicators lights,
To program a resistance level for the first segment,
simply adjust the resistance of the pedals by
pressing the Increase and Decrease buttons. To
program a target pace for the first segment, simply
pedal at the desired pace.
decrease your pace. When the center indicator
lights, maintain your current pace. IMPORTANT:
The pace guide is intended only to provide a
goal. Make sure to pedal at a pace that is com-
fortable for you.
At the end of the first segment, the program will
store the current resistance level and your current
pace in memory. Program a resistance level and a
target pace for the second segment as described
above.
The display will show the time remaining in the
program. If you stop pedaling for a few seconds,
the program will pause and the time will flash in
the display. To restart the program, simply resume
pedaling.
Continue exercising for up to forty minutes. Press
the Program button when you are finished with
your workout. The program you created will then
be stored in memory. Note: If your workout is less
than forty minutes long, any remaining segments
in the program will be stored with the default resis-
tance level and target pace.
4. Follow your progress with the display.
See step 4 on page 11.
5. Measure your heart rate if desired.
See step 5 on page 11.
7. When you are finished exercising, the console
will turn off automatically.
6. Turn on the fan if desired.
See step 6 on page 11.
See step 7 on page 11.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 11.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE A CUSTOM PROGRAM
1. Turn on the console.
The display will show the time remaining in the
program. If you stop pedaling for a few seconds,
the program will pause and the time will flash in
the display. To restart the program, simply resume
pedaling.
See step 1 on page 11.
2. Select a custom program.
4. Change the program if desired.
To select a custom program, press the Program
button repeatedly until the number 7 or 8 appears
along the left side of the display.
If desired, you can change the program while
using it. To change the resistance level for the
current segment, simply press the Increase and
Decrease buttons. At the end of the current seg-
ment, the new resistance level will be stored in
memory. To change the target pace for the cur-
rent segment, simply change your pedaling pace.
At the end of the current segment, you pace will
be stored in memory. You can continue exercising
for up to forty minutes.
3. Begin pedaling to start the program, and pro-
gram the desired settings.
Each custom pro-
gram is divided
into 40 one-minute
segments. You can
program one resis-
tance level and
one target pace for
each segment.
5. Follow your progress with the display.
See step 4 on page 11.
6. Measure your heart rate if desired.
See step 5 on page 11.
At the end of each segment, the resistance level
will flash in the display for a few seconds. The
resistance of the pedals will then automatically
change to the resistance level programmed for the
next segment. Note: If the resistance level is too
low or too high, you can override it by pressing the
Increase and Decrease buttons. However, when
the current segment ends, the resistance will auto-
matically change to the resistance level pro-
grammed for the next segment.
7. Turn on the fan if desired.
See step 6 on page 11.
8. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 11.
During the program, the
pace guide will prompt you
to increase or decrease
your pedaling pace. When
one of the two lower indi-
cators lights, increase your
pace; when one of the two
upper indicators lights,
decrease your pace. When the center indicator
lights, maintain your current pace. IMPORTANT:
The pace guide is intended only to provide a
goal. Make sure to pedal at a pace that is com-
fortable for you.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately. The elliptical exerciser can be cleaned with a
soft cloth and mild detergent. Do not use abrasives
or solvents. To prevent damage to the console, keep
liquids away from the console and keep the console
out of direct sunlight.
Switch. Loosen, but do not remove, the indicated M4 x
16mm Screw (60). Slide the Reed Switch slightly clos-
er to or away from the Magnet, and then retighten the
Screw. Rock the Flywheel forward and backward just
enough that the Magnet passes the Reed Switch
repeatedly. Repeat until the console displays correct
feedback. When the Reed Switch is correctly adjusted,
reattach the side shields. Note: If you have questions
regarding which screw should be in which hole, see
EXPLODED DRAWING B on page 19 and the PART
LIST on page 17.
When storing the elliptical exerciser, remove the bat-
teries from the console. Keep the elliptical exerciser in
a clean, dry location, away from moisture and dust.
CONSOLE TROUBLESHOOTING
HOW TO ADJUST THE BELT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, see
assembly step 8 on page 8.
If you can feel the pedals slip while you are pedaling,
even when the resistance of the pedals is at the high-
est setting, the Belt (37) may need to be adjusted.
First, remove all of the screws from both side shields;
there are three sizes of screws in the side
shields—note which size of screw you remove
from each hole.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper-
ly, make sure that your hands are positioned as
described in step 5 on page 12. Be careful not to
move your hands excessively or to squeeze the metal
contacts too tightly. For optimal performance, clean
the metal contacts using a soft cloth; never use alco-
hol, abrasives, or chemicals to clean the contacts.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. First, remove all of the
screws from both side shields; there are three sizes
of screws in the side shields—note which size of
screw you remove from each hole.
37
61
62
Next, locate the Reed Switch (47). Turn the Flywheel
(48) until the Magnet (53) is aligned with the Reed
Next, loosen the M8 x 19mm Flat Head Bolt (61) and
turn the Adjustment Screw (62) until the Belt (37) is
tight. Once the Belt is tight, tighten the Flat Head Bolt.
Then, reattach the side shields. Note: If you have
questions regarding which screw should be in which
hole, see EXPLODED DRAWING B on page 19 and
the PART LIST on page 17.
48
53
60
47
15
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. HREL3226.0
R0108A
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
1
2
1
2
2
1
2
2
2
2
6
1
1
1
2
4
1
1
2
4
2
2
2
2
2
1
1
1
1
2
1
2
1
1
1
2
2
1
1
1
2
1
1
Frame
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
*
1
1
2
1
1
1
1
1
1
2
2
4
11
1
1
1
4
4
2
8
6
4
2
4
2
4
2
2
1
1
4
4
2
2
4
1
5
6
8
12
8
2
4
2
–
–
–
Flywheel
2
Upright
Flywheel Axle
3
Front Stabilizer
Left Upper Body Arm
Right Upper Body Arm
Upper Body Leg
Upright Endcap
Foam Grip
Flywheel Bearing
“C” Magnet
4
5
“C” Magnet Bracket
Magnet
6
7
Spring
8
Idler
9
Upper Body Endcap
Console
Resistance Motor
Flange Screw
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Arm Knob
M10 x 75mm Carriage Bolt
M8 Nylon Locknut
M4 x 16mm Screw
M8 x 19mm Flat Head Bolt
Adjustment Screw
M6 x 18mm Bolt
M8 Washer
Left Upper Body Insert
Right Upper Body Insert
Pivot Cover
Upper Body Bushing
Pivot Axle
Water Bottle Holder
Upper Wire Harness
Pedal
M8 x 23mm Button Screw
M4 x 22mm Screw
M4 x 32mm Screw
M4 x 19mm Screw
M4 x 12mm Screw
M8 x 25mm Patch Screw
M5 x 16mm Screw
Large Wave Washer
Left Pedal Arm
Right Pedal Arm
Pedal Leg Cover
Pedal Leg Bushing
Outer Crank Arm Bushing
Inner Crank Arm Bushing
Wave Washer
Wheel
M4 x 12mm Round Head Screw
M8 x 19mm Patch Screw
M10 x 76mm Button Bolt
M10 x 50mm Carriage Bolt
M6 x 38mm Bolt
Wheel Cover
Left Side Shield
Right Side Shield
Left Disc
M6 Nut
M10 Split Washer
M8 Split Washer
M4 x 25mm Screw
M8 Large Washer
M4 Washer
Right Disc
Disc Cover
Rear Stabilizer
Stabilizer Endcap
Belt
M6 Nylon Locknut
M10 Nylon Locknut
Star Washer
Lower Wire Harness
Crank
M5 x 25mm Screw
M6 Star Washer
Crank Bearing
Crank Snap Ring
Left Crank Arm
Right Crank Arm
Resistance Cable
Crank Arm Spacer
Clamp
M4 x 12mm Flat Head Screw
M10 x 60mm Button Screw
Concave Spacer
Leveling Foot
Hex Key
*
Grease
Reed Switch/Wire
*
User’s Manual
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—Model No. HREL3226.0
R0108A
9
9
65
64
14
27
10
7
60
15
8
8
15
16
5
15
17
60
2
6
60
4
11
88
75
88
67
88
88
66
88
88
88
67
11
75
88
15
67
15
67
14
18
15
27
64
12
65
13
13
12
79
79
6
73
73
79
65
64
23
24
19
20
20
19
24
22
24
70
24
85
81
25
26
20
23
21
85
25
20
81
65
85
68
85
70
68
64
26
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—Model No. HREL3226.0
R0108A
80
60
31
72
59
28
29
28
80
60
60
74
78
90
59
29
72
78
90
91
60
30
64
3
90
53
60
52
90
78
89
78
91
59
50
89
84
60
76
63
84
49
83
50
34
51
77
48
59
64
55
54
71
45
44
47
60
46
87
87
69
41
57
82
40
82
56
40
39
71
33
41
43
61
87
86
38
86
87
62
87
58
1
45
86
36
87
86
57
42
35
84
37
36
34
32
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 245332 R0108A
Printed in China © 2008 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|