Haier TV Receiver 21FA10 AM User Manual

COLOUR TV RECEIVER  
OWNER'S MANUAL  
The Owner's Manual for the Follow Model:  
21FA10-AM  
Please read this manual carefully  
before operating the unit, and keep  
it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Cautions  
4. To prevent the TV set from firing  
and electric shock, don't expose the  
TV set to rain or moisture.  
1. When you clean the TV set, please  
pull out the power plug from AC outlet.  
Don't clean the cabinet and the  
screen with benzene, petrol and other  
chemicals.  
2. In order to prolong the using life of  
the TV set, please place it on a  
ventilated place.  
5. Don't open the back cover,  
otherwise it is possible to damage the  
components in the TV set and harm  
you.  
6. When the TV set isn't going to be  
used for long time or it is in thunder  
and lightening, please pull out the  
plug from AC outlet and the antenna  
plug from the cover of the TV set.  
3. Don't place the  
TV set in the  
sunshine or near  
heat source.  
Explanation on the display tube  
In general, it is not needed to clean the tube surface. However, necessary,  
it's surface can be cleaned with a dry cotton cloth after cutting off the power.  
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Antenna connection  
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV  
system or an outdoor antenna .In different places, the suitable antenna type and position  
are different.  
300 twin-lead cable  
Antenna adapter  
75 coaxial cable  
Mixer  
additional  
purchase  
Antenna input  
75 standard  
coaxial type  
Plug  
(additional purchase)  
AC power socket  
Note  
* It is recommended that you'd better use 75 coaxial cable to remove the  
disturbance caused by airwave.  
* Don't bind antenna cable and electric wire together.  
Preparation for the remote control  
Tips for remote operation  
Battery installation  
!
Remove the batteries cover.  
!The battery life should be about one year  
undernormaluse.  
!
Insert two size AA batteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment.  
! When the remote control will not be used  
for a long period of time or when the  
batteries are worn out, remove the batteries  
topreventleakage.  
!
Do not throw the batteries into a fire.  
Dispose of used batteries in the specified  
manner.  
! Do not drop, dampen or disassemble the  
remotecontrol.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Position of Keys and Plug-ins  
Front and side panel  
Power indicator  
Signal receiver  
Power switch  
Menu  
TV/AV switch  
Volume down/up  
Channel down/up  
Back panel  
VIDEO2  
VIDEO  
L
AUDIO  
R
Video Y input terminal  
Video Cb input terminal  
Antenna input socket  
Video Cr input terminal  
Audio right channelinput terminal  
Audio left channelinput terminal  
Video input terminal  
Audio left channeloutput terminal  
Audio right channeloutput terminal  
Video output terminal  
S-VIDEO input terminal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Buttons and Descriptions  
TV and AV Exchange Button  
Toexchanger between TVand  
other available videoinputs  
TV/AV  
DISP  
SYSTEM  
SCAN  
LOCK  
Mute Button  
Press to conceal the sound of programs.  
Screen Display Button  
System Adjust Button  
Direct-digit Choosing Button  
Directly select channel numbers  
Digit Select Button  
Change the channel position number  
between one digit, two-digits and three  
-digits.  
CALENDAR  
S.STD  
Picture Mode SelectButton  
There are DYNAMIC, STANDARD,  
MILD,MEMORY, PICTURE MUTEand  
COLOR MUTE sixmodes of picture.  
P.STD  
Menu Select/Adjust Button  
Use this buttonto adjust themenu,  
the volume andthe channels, aswell  
as to controlthe game.  
CH+  
MENU  
CH-  
VOL+  
VOL-  
Program Play-forward Button  
Favorite program button  
Game Background SelectButton  
FM on /off button  
BACK  
PRE  
Game Exit Button  
FAVORITE SHUTTLE  
No available  
No available  
QSET  
Start/Restart Game Button  
Change the aspectratio  
Saving mode on/off button  
Shuttle button  
FM  
/
ZOOM  
TDX  
MODE  
EXIT  
GAME  
Program Play-backward Button  
Sound Mode Select Button  
Calendar  
Program Scan Button  
Lock Setting button  
DC Standby Button  
Sleep TimerButton  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power On and Power Off  
Below are methods on how to power on/off the TV set with the switch on the TV and  
on the remote control.  
Power on/off  
Connect/disconnect to the power  
1. Connect the power supply wire, then press  
power switch button, the red power indicator will  
light, in several seconds the picture will appear  
on the screen.  
Power indicator  
Signal receiver  
2. If the TV is in the state of standby, press the  
button on the remote control.  
Power switch  
Menu  
TV/AV switch  
NOTE  
1. You can also press the 0-9  
button to call off the standby  
status instead of pressing the  
Volume down/up  
Channel down/up  
DC Standby button. Press the  
digit button of the preset channel  
(limited to one digit) , you can  
complete the selection of channel while you turn on the  
TV set( To operate the preset of TV channel, please see  
TUNING on page 11-14).  
2. When you do not use the remote control, you can  
directly press the CH+/- button on the television to  
call off the standby status.  
3. Press the button on the remote control  
to get into the standby status.  
DC Standby Button  
4. Press the button on the TV set to  
completely turn off the TV.  
Direct-digit Choosing Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs  
The channels amountto 218 .  
Viewing TV programs  
How to select the TV program  
1. Use the direct-digit choosing button  
Press the button from 0-9 to select a one digit channel.  
If you want to select a two-digits channel, press the  
Digit Select button and change it into two-digits mode,  
then press the number of the channel.  
If you want to select a three-digits channel, press the  
Digit Select button and change it into three-digits mode,  
then press the number of the channel.  
If the channel position number you select is larger than 218,  
the TV will use the first two number as the channel position.  
2. Use CH+/- button  
Direct-digit Choosing  
button  
Press CH+ to increase the channel position number.  
Press CH- to decrease the channel position number.  
3. Use PRE button and BACK button  
Press PRE button, you can go back to the channels you  
viewed (as many as four).  
Digit Select  
button  
Then, press BACK button, you can return to the channels you  
were watching just now (as many as four) .  
PRE  
BACK  
For example, if you have viewed channel 1,2,3,4,5,6 after the  
TV is powered on, and the channel you are watching now is  
number 7, then press PRE button, you can view channel 6,5,  
4,3, and you may press the Back button to return to channel 7.  
Choose the proper volume you like  
Press VOL+/- button to adjust the volume.  
VOLUME  
SYSTEM  
If the color of one channel is abnormal  
It might be because the color has been  
set improperly.You may follow the  
instruction below toadjust it. Press  
SYSTEM button, and you can see  
the form.  
COLOR AUTO  
SOUND BG  
SELECT ADJUST  
CH+  
If the color of the picture is abnormal  
Press CH+/- button, and move the indicator to COLOR,  
and press VOL+/- button to select the proper color(AUTO,  
NTSC3.58,NTSC4.43 and PAL will appear alternately).  
Generally, please set to AUTO.  
VOL-  
VOL+  
MENU  
CH-  
If the sound is abnormal  
Press CH+/- button, and move the indicator to SOUND,  
and press VOL+/- button to select the proper sound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs(continued)  
Program scanning function is to let the television automatically scan all  
preconcerted channel program(abouttwo seconds perchannel).  
Program scan and screen display  
Program scanning function  
1. If you want to scan the programs  
and select your favorite channel ,  
just press the SCAN button, then  
the television will start scanning  
SCAN  
from the present channel with a  
rate of two seconds per channel  
and until all the preconcerted  
programs have been displayed  
once, the TV set will return to the  
starting channel.  
2. If you want to terminate this  
function during the scanning, press  
the SCAN button again, and the  
program will stay at the present channel.  
Screen display  
Usually, when you press the DISP button, the channel  
DISP  
number will appear on the top right corner of the screen  
and press it again, the channel number will disappear  
or disappear automaticallyin about 5seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs(continued)  
Saving mode.favorite program and shuttle  
Saving mode  
1. Using the QSET button  
Press the QSET button to switch the saving mode  
CH+  
on/off. And the screen will display on/off at the  
same time.  
Press the QSET button more than 3 seconds to  
call the ENERGY SAVE menu .  
VOL-  
VOL+  
MENU  
CH-  
2.Press VOL+/- button and CH+/-  
button to set the options of  
AMBI-LUM/ AMBI-SND, after  
this, select the ADJUST option  
ENERGY SAVE  
AMBI-LUM BRI.  
AMBI-SND NOISE  
ADJUST  
SELECT ADJUST  
and press VOL+/- button to  
display OK, the set is finished.  
QSET  
Note: 1. After adjusting the item in the ENERGY  
SAVE, the energy save function is on  
automatically.  
2. If the energy save mode is on, the buttons  
P.STD and S.STD will not work. The screen  
displays ENERGY SAVE ON.  
FAVORITE  
Favorite program setting  
Press FAVORITE button for long time to enter the menu  
as right figure. Press CH+/- button to select  
FAV.POS  
the favorite programand VOL+/- button to  
adjust the channel. You could set 8favorite  
programs.  
After thesetting, press FAVORITE button  
to select yourfavorite channel youhave  
set .  
SHUTTLE  
Shuttle  
Press SHUTTLE for long timeto set the program youare  
watching as the shuttle channel.  
If you want to back to this channel from the current  
channel, press SHUTTLEbutton once .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FM  
FM  
FM  
Press FM to enter and press again to exit  
FM  
Press CH+/- button to tune automatically  
Press VOL+/- button to tune manually, press VOL+/- button  
to adjust the volume if there is no FM on screen.  
FM  
1
Press FM to enter.  
FM 106.3MHZ  
FM  
2 Press CH+/- button to start to  
tune automatically.  
SEARCHING  
FM 106.3MHZ  
CH+  
VOL-  
VOL+  
MENU  
CH-  
3 After searching the program  
the screen displays as right  
figure, you could press 0 button  
according the menu and  
displays as right.  
FM  
FM 106.3MHZ  
PRESS 0 KEY  
TO MEMORIZE  
FM  
FM- 106.3MHZ  
PRESS 1-9 KEY  
TO MEMORIZE  
4
Press 1-9 to display  
FM  
the menu. That means  
the programs have been  
stored.(take 1 for example)  
FM1 106.3MHZ  
MEMORIZED  
Note:1. Press VOL+/- button to tune manually.  
Other steps is the same as the auto tuning.  
2. 9 channels could be stored.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning  
There are three ways of searching: automatic search, manual search and MFT  
(manual fine tune).  
You may operate it either on the TV or on the remote control. Here is mainly about  
the remote control.  
Automatic search  
Automatic search  
1. Press MENU button  
TUNING  
continuously until select  
TUNING menu.  
POS. EDIT  
POS. EX.  
SEARCH  
AUTO MEMORY  
UP  
CH+  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button to move  
the indicator to AUTO  
MEMORY.  
TUNING  
POS. EDIT  
POS. EX.  
SEARCH  
UP  
AUTO MEMORY  
3. Press VOL+ button, then  
AUTO MEMORY mode will  
work. The TV set will search  
automatically all available  
programs, after that, all  
available programs will be  
stored in turn and the TV set  
will return to the first channel.  
ASM  
U
0
STOP  
If you want to stop the search, just press VOL- button.  
The order of the automatic search is due to the frequency  
of the program, generally speaking, it is used only at the  
first time you search the program, and once the order of  
the program has been confirmed, you don't have to use  
this function, otherwise the order of the program will be  
changed.  
CH+  
After searching  
VOL-  
VOL+  
MENU  
CH-  
Press CH+/- button to check the channels.  
If the color is abnormal in a certain channel, it may be  
the color system has not been set properly, so you  
should adjust it to the proper system (Reference to  
page 7).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(continued)  
Manual search  
Manual search  
1. Press CH+/- button or the Direct-digit Choosing button to  
select a channel directly(take channel 1 for example).  
CH+  
TUNING  
2. Press MENU button  
continuously until select  
TUNING menu.  
VOL-  
VOL+  
MENU  
CH-  
POS. EDIT  
POS. EX.  
SEARCH  
UP  
AUTO MEMORY  
3. Press CH+/- button and move  
the indicator to SEARCH.  
TUNING  
POS. EDIT  
POS. EX.  
SEARCH  
UP  
AUTO MEMORY  
Direct-digit Choosing  
Button  
4. Press VOL+/- button to start  
searching.  
VOL- button is used to search the  
lower frquency channel.  
CH+  
VOL+ button is used to search the  
higher frequency channel.  
Repeat the steps until you find  
the channel you need.  
VOL-  
VOL+  
MENU  
CH-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(continued)  
MFT  
MFT(manual fine tune)  
When you can't get a satisfactory picture and audio effect,  
you can fine tune to obtain.  
CH+  
VOL-  
VOL+  
MENU  
CH-  
1. Press MENU button  
continuously until select  
TUNING menu.  
TUNING  
POS. EDIT  
POS. EX.  
SEARCH  
AUTO MEMORY  
UP  
2. Press CH+/- button to select  
POS EDIT and VOL+ button to  
enter.  
POSITION  
BAND  
SKIP  
1
VL  
ON  
UP  
MFT  
100.25MHZ  
3. Press CH+/- button to select  
POSITION and VOL+/- button to select the channel  
(Take channel 1 for example)  
Direct-digit Choosing  
Button  
Note: the same way to adjust the BAND, and VL/VH/U will  
appear alternatively.  
4. Press CH+/- button and move  
the indicator to MFT.  
CH+  
POSITION  
BAND  
SKIP  
1
VL  
ON  
UP  
VOL-  
VOL+  
MENU  
CH-  
MFT  
100.25MHZ  
5. Press VOL+/- button repeatedly to fine tune, until the  
picture and the sound become satisfactory.  
VOL- button is used to search the lower frquency channel.  
VOL+ button is used to search the higher frequency channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning(continued)  
Skip  
Skip  
After the programs are presetted, you can skip some  
programs so that to select your favorite channels only.  
TUNING  
1. Press MENU button  
continuously until select  
TUNING menu.  
POS. EDIT  
POS. EX.  
SEARCH  
AUTO MEMORY  
UP  
2. Press CH+/- button to select  
POS EDIT and VOL+/- button to  
enter.  
Direct-digit Choosing  
Button  
3.Press CH+/- button to select  
POSITION and VOL+/- button  
to select the channel(Take  
channel 1 for example)  
POSITION  
BAND  
SKIP  
1
VL  
ON  
UP  
MFT  
100.25MHZ  
4. Press CH+/- button and move  
the indicator to SKIP.  
POSITION  
BAND  
SKIP  
1
CH+  
VL  
ON  
UP  
5. Press VOL+/- button to set it  
ON.  
MFT  
100.25MHZ  
VOL-  
VOL+  
MENU  
CH-  
6. Press MENU button to close the menu. When you select  
channels with CH+/- button, this channel will be skipped.  
However, you can also use the Direct-digit Choosing button on  
the remote control to select this channel directly.  
If you want to recover the skipped channel  
1. Use Direct-digit Choosing button to select the number of the  
channel to be recovered.  
2. Do the above steps again.  
3. Press VOL+/- button to set SKIP OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
Multiple picture modes  
DYNAMIC  
How to select the picture mode  
You may select the mode you want from the  
five preset modes and one individual mode.  
STANDARD  
P.STD  
MILD  
Press the P. STD button to select a mode you  
like.DYNAMIC PICTURE, STANDARD  
PICTURE, MILD PICTURE, MEMORY,  
PICTURE MUTE and COLOR MUTE,  
totally six picture modes can be selected  
alternately.  
MEMORY  
PICTURE MUTE  
COLOR MUTE  
MODE  
DYNAMIC  
STANDARD  
MILD  
PICTURE QUALITY  
BRIGHT COLOR  
MEDIUM COLOR AND BRIGHTNESS  
LOW COLOR AND BRIGHTNESS  
SET BY YOURSELF  
MEMORY  
PICTURE MUTE NO PICTURES  
COLOR MUTE  
BLACK AND WHITE PICTURE  
If the picture mode is set to PICTURE MUTE or COLOR  
MUTE,it will autorenew to DYNAMIC mode when you  
restart your TV set with remote control.  
Set the parameter of MEMORY  
1. Press MENU button  
continuously until select  
PICTURE  
ADJUST  
3A FILTER  
B.B  
PICTURE menu, press CH+/-  
button to select ADJUST and  
VOL+/- button to enter.  
CH+  
ON  
2. Press CH+/- button, move the  
indicator to the option you want  
to adjust, then press VOL+/-  
button to do the adjustment.  
Then the parameter will be  
automatically stored in  
VOL-  
VOL+  
MENU  
CH-  
CONTRAST  
BRIGHT  
COLOR  
100  
50  
50  
50  
SHARP  
MEMORY option.  
VOL+  
OPTION  
VOL-  
CONTRAST  
BRIGHT  
COLOR  
STRONG  
BRIGHT  
THICK  
WEAK  
DARK  
LIGHT  
SOFT  
SHARP  
SHARP  
PURPLE  
TINT  
GREEN  
*The item of TINT appears when the N system signal is received,  
and you can adjust it by VOL+/- button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
(continued)  
Multiple Sound ModesandSettingtheSound  
How to select the sound mode  
You can quickly select your most favored  
sound mode from the following three  
kinds of modes.  
Press the S.STD button to select the  
sound quality that you want.LOW VOL/  
NORMAL VOL/ HIGH VOL can be  
selected in turn(their parameter may  
be adjusted due to your need).  
LOW VOL  
S.STD  
NORMAL VOL  
HIGH VOL  
Setting the sound  
This function can let you regulate the volume to the  
preconcerted parameter quickly( such as the LOW VOL/  
NORMAL VOL/ HIGH VOL).  
1. Press MENU button continuously until select  
SOUND menu.  
CH+  
2. Press CH+/- button, move  
the indicator to the HIGH  
SOUND  
LOW VOL  
20  
40  
60  
50  
VOL, then press VOL+/-  
button to adjust the parameter  
you expect. With the same  
method, you can adjust the  
parameter of the LOW VOL  
and NORMAL VOL.  
NORMAL VOL  
HIGH VOL  
BALANCE  
VOL-  
VOL+  
MENU  
CH-  
Suppose the LOW VOL is A, NORMALVOL is B, HIGH VOL  
is C, they should be: 0 100  
A
B
C
You should adjust themin the sequenceof HIGH VOL,  
NORMAL VOLand LOW VOL.  
S.STD  
3. Press the S.STD button repeatedly to select the  
different sound setting modes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Picture and the Sound  
(continued)  
S.C.C, auto off and mute  
How to use the S.C.C(soft change channel)  
This TV set provides you with the function of S.C. C.  
When it is set "ON", the picture will fade in and fade  
out when the channel is changed.  
FUNCTION  
1. Press MENU button  
continuously until select  
FUNCTION menu.  
CH+  
AUTO OFF ON  
S.C.C  
CURTAIN  
3A OPT  
OFF  
III  
OFF  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/-button, move  
the indicator to the S.C.C,  
then press VOL+/-button to  
set it ONor OFF.  
Auto off  
Toprevent from forgettingto turn off the TV, this TV  
could turn off automatically. That is , if the off timer is  
set on and after two hours without any operation, this  
TV will switchinto standby modeautomatically to  
save your energy.  
How to use the MUTE function  
When you want to pay attention to the environment or  
answer a telephone, or to meetguests, using themute  
function is veryconvenient.  
1. Press  
button, a sign will  
appear at the bottom center  
of the screen, and the sound of  
the TV set is cutoff.  
2. In order to recover the sound, press button again  
or press VOL+/-button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function  
3A filter and screen protection  
How to use the 3A filter function  
1.Press MENU button  
PICTURE  
ADJUST  
continuously until select  
the PICTURE menu. Then  
press CH+/- buttonto move  
the indicator to 3AFILTER,  
and press VOL+/-button to  
enter  
3A FILTER  
B.B  
ON  
CH+  
VOL-  
VOL+  
MENU  
CH-  
2.Press CH+/- button to move  
the indicator to the item you  
want to adjust and then  
3A FILTER USER  
2500K  
3300K  
5600K  
6500K  
7300K  
8500K  
9300K  
-----I-----  
-----I-----  
-----I-----  
-----I-----  
-----I-----  
-----I-----  
-----I-----  
VOL+/- button to adjust it .  
12000K -----I-----  
15000K -----I-----  
SELECT  
ADJUST  
Note: FILTER can switch USER, STANDARD,6500K,  
7300K, 8500K and 9300K in cycle, and the color  
temperature changes when you switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer  
This TV set provides you with three timer functions such as timer on, timer off  
and sleep off.  
Timer off  
Timer off  
Using this function can turn the TV set automatically  
into standby status at the preconcerted time.  
1. Press MENU button continuously  
until select TIMER menu,  
press CH+/- button to select  
CLOCK and VOL+/- button to  
set the time. (it will be the  
standard of the clock of ON/  
OFF TIMER.)  
TIMER  
CLOCK 0:00  
OFF TIMER 0:00  
ON TIMER  
ON POS  
OFF  
0
CH+  
APP.TIME  
APP. POS  
OFF  
0
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button, move  
the indicator to OFF TIMER,  
then press VOL+/- button to  
set the time.  
TIMER  
CLOCK  
OFF TIMER 0:00  
0:00  
ON TIMER  
ON POS  
OFF  
0
APP.TIME  
APP. POS  
OFF  
0
CH+  
VOL-  
VOL+  
MENU  
CH-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer (continued)  
Sleep timer and on timer  
Sleep timer  
Using this function, the TV set can be changed into the  
standby status after a period of preset time from when  
this function is activated.  
1. The utmost time for this function is  
120 minutes, and the time interval is  
10 minutes.There are totally 12 kinds  
of off-time.  
2. Press the  
button repeatedly,  
the screen will show in turn as the  
right form.  
On Timer  
When this function is used, the TV set can  
automatically turn the power on at the preset time in  
the standby statusand display thepreset program.  
1. Press MENU button continuously  
until select TIMER menu.  
CH+  
TIMER  
CLOCK  
OFF TIMER 18:20  
ON TIMER OFF  
ON POS  
APP.TIME  
APP. POS  
18:00  
2. Press CH+/- button to select  
CLOCK and VOL+/- button to  
set the time. (it will be the  
standard of the clock of ON/  
OFF TIMER.)  
VOL-  
VOL+  
MENU  
CH-  
0
OFF  
0
TIMER  
3. Press CH+/-button, move  
the indicator to ON TIMER.  
Then, press VOL+/-button to  
set the time. (The method is  
the same asOFF TIMER.)  
CLOCK  
18:00  
OFF TIMER 18:20  
ON TIMER 19:00  
ON POS  
APP.TIME  
APP. POS  
0
OFF  
0
CH+  
4. Press CH+/-button, move  
the indicator toON POS,  
press VOL+/- button to set  
the channel with which the  
TV is turned on(take 1 for  
example).  
TIMER  
VOL-  
VOL+  
MENU  
CH-  
CLOCK  
18:00  
OFF TIMER 18:20  
ON TIMER 19:00  
ON POS  
APP.TIME OFF  
APP. POS  
1
0
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Timer (continued)  
The channels appointment function can help you conveniently preset as many  
as six programs at a time. At the preset time, the TV set will automatically  
change to thepreconcerted channel. Iftwo or moreprograms are setin a same  
time, the last channel number will be selected.  
Channels appointment  
Channels appointment  
1. Press MENU button  
continuously until select  
TIMER  
CLOCK 18:00  
OFF TIMER 18:20  
ON TIMER  
ON POS  
APP.TIME OFF  
TIMER menu, press CH+/-  
button to select CLOCK and  
VOL+/- button to set the time.  
(The method is the same as  
OFF TIMER. It is the standard  
of the clock of APP. POS)  
CH+  
19:00  
1
APP. POS  
0
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/-button, move  
the indicator toAPP.TIME.  
Then press VOL+/-button to  
set the time(the method is the  
same as OFFTIMER ).  
TIMER  
CLOCK  
OFF TIMER 18:20  
18:00  
ON TIMER  
ON POS  
19:00  
1
APP.TIME  
APP. POS  
19:30  
0
Repeatedly press VOL+/- button,  
the time changes with a rate of  
one minute;  
Press the button without  
releasing, the time changes with  
a rate of ten minutes.  
CH+  
3. Press CH+/- button, move  
the indicator to APP.POS.  
TIMER  
CLOCK  
OFF TIMER 18:20  
VOL-  
VOL+  
MENU  
CH-  
18:00  
ON TIMER  
ON POS  
19:00  
1
4. Press VOL+/- button to set  
the channel number you want  
(e.g. 100).  
APP.TIME  
APP. POS  
19:30  
100  
At the presettime, the TV set willautomatically change  
to the preconcertedchannel;  
DISP  
This function is available onlywhen the TV set ison, and  
it cannot beused in thestatus of standbyor power off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Function  
Background  
Background selection  
If no signal has been received  
by the TV set,when theB.B  
function is set ON, the screen  
will change into the form on  
the right shows.  
CH+  
VOL-  
VOL+  
MENU  
CH-  
PICTURE  
ADJUST  
Press MENU button  
continuously until select  
the PICTURE menu. Then  
press CH+/- buttonto move  
the indicator to B.B, and  
press VOL+/- button to set it  
ON.  
3A FILTER  
B.B  
ON  
SELECT  
ADJUST  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function(continued)  
Curtain function,calendar display  
How to use the Curtain function  
This TV set provides three types of Curtain function  
for you toselect.  
1. Press MENU button  
continuously until select  
FUNCTION menu.  
CH+  
FUNCTION  
AUTO OFF ON  
S.C.C  
CURTAIN  
3A OPT  
OFF  
I
OFF  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button, and  
move the indicatorto  
CURTAIN, then press VOL+/-  
button to select from I, II  
to III.  
I: curtain  
II : fade in and fade out  
III: mixed Iand II  
Note:You can select 3AOPT ON or OFF, when you select  
ON, the color enhances.  
How to use the calendar function  
CALENDAR  
This TV set has been designed to store the calendar  
from the year 1901 to 2050.  
1. Press the CALENDAR button  
AUG 2006  
and then the calendar will  
SU  
MO  
TU  
WE TH  
FR  
SA  
appear on the screen(Press the  
CALENDAR button again to  
conceal the display), the display  
time is 10s.  
CH+  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button to adjust  
the YEAR, press VOL+/- button  
to adjust the MONTH.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the other Function(continued)  
The function of channel exchange will enable you to exchange any two programs  
and you can conveniently adjust the order of the programs due to your own need.  
Channel exchange  
Channel Exchange  
for example, to change between channel1 and 9  
1. Press MENU button  
continuously until select  
TUNING menu.  
TUNING  
CH+  
POS. EDIT  
POS. EX.  
SEARCH  
AUTO MEMORY  
UP  
VOL-  
VOL+  
MENU  
CH-  
2. Press CH+/- button, move  
the indicator to POS.EX.,  
Then press VOL+ button to  
enter the sub-menu.  
EX.POS1  
EX.POS2  
EXCHANGE  
RETURN  
1
1
?
3. Press CH+/- button, move  
the indicator to EX.POS1,  
then press VOL+/- button to  
set the channel number to 1.  
4. Press CH+/- button, move  
the indicator to EX.POS2,  
then press VOL+/- button to  
set the channel number to 9.  
EX.POS1  
EX.POS2  
EXCHANGE  
RETURN  
1
9
?
Direct-digit Choosing  
Button  
CH+  
5. Press CH+/- button, move  
the indicator to EXCHANGE,  
then press VOL+/- button to  
confirm. Then the programs  
of the two channel will be  
exchanged.  
VOL-  
VOL+  
MENU  
CH-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock  
This TV set provides you with the LOCK function, you can choose it due to your  
need to protectyour TV set.  
Changing your password  
Changing your password  
This TV set can set a four digit password, the original  
one is 0000, if you want to reset it, please follow the  
instructions below.  
LOCK  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
1. Press LOCK button, the  
screen will showas the form  
on the right.  
OFF  
OFF  
OFF  
OFF  
OFF  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
CH+  
2. Press the 0 button for four  
times, and enter the menu of  
LOCK setting. PressCH+/-  
button and move the indicator  
to CHANGE PW. , and press  
VOL+ button to enter the  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
VOL-  
VOL+  
MENU  
CH-  
OFF  
OFF  
OFF  
OFF  
OFF  
sub-menu of CHANGEPW.  
3. Press the Direct-digit  
Choosing button and input a  
four-digits password.  
CHANGE PW.  
NEW PW.  
----  
4. After inputting the new  
password, return to the  
original status as shown on  
the right form, then, you can  
input the newpassword to  
enter the menuof LOCK.  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
Direct-digit Choosing  
Button  
OFF  
OFF  
OFF  
OFF  
OFF  
Note: After changing the  
password, please remember  
the new password, or you can  
not use this function in future.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Lock(continued)  
Setting the Lock  
Setting the Lock  
There are TUNING LOCK, PRESET PROG. ,AV LOCK,  
CHILD LOCK and MAX.VOLUME five lock setting, you  
can set it due to your need.  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
1. Press the LOCK button, the  
screen will show as the form  
on the right.  
LOCK  
OFF  
OFF  
OFF  
OFF  
OFF  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
2. Press the Direct-digit  
Choosing button 0 for four  
times( or inputthe password  
you set), and enter the menu  
of LOCK.  
OFF  
OFF  
OFF  
OFF  
OFF  
LOCK SET UP  
PASSWORD ----  
CHANGE PW.  
TUNING LOCK  
PRESET PROG.  
AV LOCK  
CHILD LOCK  
MAX. VOLUME  
UNLOCK  
3. Press CH+/-button, move  
the indicator to TUNING  
LOCK, then press VOL+  
button to setit ON orOFF.  
Direct-digit Choosing  
Button  
OFF  
OFF  
OFF  
OFF  
OFF  
Note:  
1.When theTUNING LOCK is set ON, if you wantto enter the  
TUNING menu, youwill have totype the password.  
CH+  
2.The PRESETPROG allows youto turn onthe TV always with  
one channel.  
VOL-  
VOL+  
MENU  
CH-  
3.WhenAV LOCK is setON, AV cannot beused, hence the  
screen will changeinto black andindicate that ithas been  
locked. The TV set will be inthe status ofmute.  
4.When theCHILD LOCK isset ON, ifthe buttons onthe TV  
are pressed, itwill indicate thatthe TV set is inthe status of  
CHILD LOCK, andthe buttons won'twork.  
5.The MAXVOLUME allows youto set afigure of thetop limit of  
volume.  
6.The UNLOCKallows you toset all thelock to OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game  
This TV set provides you with the game, after entering the game,  
except the buttons that are appointed in the game( for example, the game button,  
CH+/-and MODE, etc.)and the DC Stand by button, the other buttons cannot be  
used.  
Game control buttons and method of playing the game  
Game control buttons  
CH+  
MODE  
Used to select  
the score  
VOL-  
VOL+  
MENU  
CH-  
To select the background  
when playing game  
GAME  
EXIT  
To start/restart the game  
To exit game  
Used to confirm the digits  
Method of playing the game  
1. Press GAME button to start the game screen, then press VOL+ button to  
select the score of BET(1-10)( the score will decrease as much as  
the value of BET). After these operation you could press VOL-  
button to enter the game , the digits and flag will change quickly.  
2. Press VOL+ button to enter after select a digit(1-8), and then the  
selection of the second digit, press VOL+ button again to start the  
second digit selection. REACH will display on the screen if  
2 is also selected; and WIN will display on the screen if 2  
is selected on the third position, and the score will also display  
on the screen.  
3. You can press the GAME button to restart the game when it  
is game over or during the process of the game.  
Note WIN displays on the screen on the following condition, and the score  
is as following  
The three position  
Score  
Two 7(7 appears on two position )  
Two flags  
Three 7  
Three flags  
Three other digits except 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Additional Equipments  
Connecting additional equipments  
You can connect the DVD,VCR and stereo system to theAV output to enjoy a  
higher quality of picture and sound effect.  
Signal flow  
White (Audio left channel)  
Red (Cr and audio right channel)  
Blue (Cb)  
Green (Y)  
Yellow (Video)  
DVD, VCD or other units  
3
Audio output  
Video output  
Laser DVD withoutput terminal  
DVD, VCD or otherunits  
Note: About the S-VIDEO  
1.When receive s-video signal, you must remove video signal; when receive  
video signal, you must remove s-video signal.  
2.When receive side video signal, you must remove back video signal; when  
receive back video signal, you must remove side video signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
*To assist in location possible faults use help guide below.  
BREAKDOWN PHENOMENON  
CHECKING  
SOUND  
PICTURE  
The aerial direction and connection  
Picture with snow  
Noise  
This is called ghosting which can be minimized with  
an outside aerial, and good quality cable and  
terminations. Altering the aerial direction can also  
minimize this effect.  
Normal  
Double or Triple Image  
Electrical interference which can be caused by cars,  
motorbikes etc, Fluorescent lamps and dirty  
insulators on overhead power cables.  
Noise  
Disturb  
Volume Sound mute  
No sound  
Normal  
Ensure that the power supply is connected to the TV  
set and turned on. Also ensure that the TV set isnot in  
"PICTURE MUTE" or that the brightness and contrast  
are not turned down  
No Picture  
No sound  
Adjust color control  
Adjust channel again  
No color  
Normal volume  
Scramble  
Normal or Weak Volume  
Colour Purity faultwhich can becaused by movingthe  
TV set, placingmagnets near theTV screen orturning  
on/off house holdappliances such asvacuumcleaners  
near the TVset. Turnthe TV off with themains power  
switch for 15minutes. When thepower is turnon again  
the TV setwill automatically degaussthe picture. In  
server cases leavethe TV setturned off overnight.  
Color Spot  
Normal volume  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized service center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove  
the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.  
3. The cabinet may produce the occasional "snapping sound". This is normal and caused by the materials  
in the cabinet expanding with room temperature changes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
*The specifications offered you here are only for reference and, with the improvement  
of the products ,there may be some different between the description and the practicality.  
Specifications  
Color system  
Sound system  
Picture tube  
PAL AV NTSC3.58 NTSC4.43  
BG DK  
21 color picture tube(the viewable dimension is 51cm)  
3W  
Sound output power  
Power requirements  
Power consumption  
See rating plate  
See rating plate  
Dimension (mm)  
640(W) x 339(D) x 455 (H) (mm)  
Working temperature: +5  
Working humidity: 20%-80%  
Storage temperature: -15  
Storage humidity: 5%-90%  
+35  
+45  
Environment conditions  
Remote control  
Owner's manual  
Battery(AA)  
X1  
X1  
X2  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
The dimension in this manual is an approximation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
0090505538  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Pressure Washer 308 505 User Manual
Greenway Home Products Water Dispenser VWD5206W User Manual
Haier Dishwasher HDW100SST User Manual
Hasbro Motorized Toy Car 09392 User Manual
Hearth and Home Technologies Indoor Fireplace SMARTBATT HNG User Manual
Honeywell Laptop VM1 User Manual
Honeywell Video Gaming Accessories MS4103 User Manual
Hotpoint Refrigerator FF50 User Manual
HP Hewlett Packard Scanner G4000 series User Manual
Iluv Car Stereo System i109 User Manual