INSTALL INSTRUCTIONS C-TCB-21
TELESCOPING COMPUTER BASE
1998-2003 DODGE DURANGO
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard socket set
3/8” Metric socket set
Ratcheting wrench (3/8” drive)
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE & COMPONENTS:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
Pole support assembly
Telescoping pole assembly
Side support brace
5/16-18 Nylock nut
5/16” Flat washer
CM93071-21
CM93072-3
CM93146
GSM30017
GSM31006
GSM33060
¼” x 1” Hex head lag bolts
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
Side support
brace
¼” x 1”Hex
head lag bolts
Telescoping pole
assembly
Pole support
assembly
5/16-18
Nylock nut
Location of
passenger side factory
seat base bolts
C-TCB-21-INST-12-04
Download from Www.Somanuals.com. All Manuals Search And Download.
|