Lever Chain Hoist
Item 67144 – 1/4 Ton
Item 96482 – 3/4 Ton
Item 66106 – 1-1/2 Ton
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Manual Revised 11e
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Personal safety
Sudden load movement may briefly create
excess load causing product failure.
Do not jostle or twist a suspended load,
move item to the work area, lower and
release the Hoist before beginning work.
a. Stay alert, watch what you are doing
and use common sense when using
a tool. Do not use tools while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating a tool may
result in serious personal injury.
d. Do not use the Hoist to lift
a person or animal.
e. Do not work underneath a suspended load.
b. Use personal protective equipment.
Always wear eye protection. Wear
hard hat. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
f. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
g. This product is not a toy.
c. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
Keep it out of reach of children.
h. Do not lubricate the braking system.
i. Do not operate with twisted chain.
j. Do not use handle extension to
increase force on the handle.
d. Only use safety equipment
that has been approved by an
appropriate standards agency.
Unapproved safety equipment may
not provide adequate protection.
Eye protection must be ANSI-approved.
k. Do not insert bolt between chain
links to ‘splice’ chain.
l. Do not use a hammer to force
hook/chain into place.
m. Do not attach hook tip onto chain.
3. Tool use and care
n. Attach hook completely around
attachment point and make sure
the safety latch closes properly,
as shown in Figure A, right.
a. Store idle tools out of the reach
of children and do not allow
persons unfamiliar with this
tool or these instructions to
operate the tool. Tools are dangerous
in the hands of untrained users.
b. Inspect before every use. Check for:
• damaged, worn, or deformed/
stretched chain links or hook,
• damaged, disabled, or missing
safety latch,
• misalignment or binding
of moving parts,
Figure A: Incorrect and
Correct Hook Attachment
• breakage of parts, and
o. Do not turn the Brake Knob
(if equipped) to lower a load.
• any other condition that may
affect the tool’s operation.
If damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
p. Do not leave load suspended when
unattended. Load brake is intended
to support load only temporarily.
c. Do not lift, lower, pull anything
beyond rated capacity.
q. Lift load slightly off ground and stop
to test load brake before each lift.
Be aware of dynamic loading!
Lever Chain Hoist
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING! Verify that the load weighs
less than the capacity of your Hoist model,
as listed in the Specifications chart.
Attachment point must be rated to support
the combined weight of hoist and load.
67144 – 1/4 Ton
Operating Instructions
Read the ENTIRE IMPORTANT
1. Attach the Hoist to the connection
point by sliding the Top Hook onto it.
The Top Hook must fit the connection point
securely, with the safety latch fully engaged,
as shown in Figure A, on the right.
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Top Hook
Figure A: Incorrect and
Correct Hook Attachment
safety latch
2. Turn the Selector Lever to the neutral position
(see Figure C) to disengage the ratchet.
Selector
Lever
Lever
Handle
Selector
Lever
Figure C: 67144 Selector Lever
Neutral Position
safety latch
3. Pull the load chain by hand and
attach the Load Hook to the load.
The safety latch should be fully engaged.
Do not suspend a load on just the
end of the hook, see Figure A.
Load Hook
Figure B: 67144 Controls
Page 4
For technical questions, please call 1-800-444-3353.
Lever Chain Hoist
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Move the Selector Lever to the up position
(see Figure D) and ratchet the
6. If the load is to be moved, lower it close to the
ground prior to attempting to relocate the load.
Do not touch the Selector Lever until
the load is ready to be lowered.
Lever Handle to lift the load.
7. To lower the load, turn the Selector Lever to
the down position (see Figure E) and ratchet
until the load is resting fully on the work area.
Figure D: 67144 Selector Lever
Up Position
Note: If there is slack in the load chain, you may
need to pull on the load chain slightly to get the
ratchet to engage until the slack is taken up.
Figure E: 67144 Selector Lever
Down Position
5. Lift load slightly and stop momentarily to make
sure the load brake works before proceeding.
8. Disconnect Hoist, clean, then store the
tool indoors out of children’s reach.
WARNING! Keep bystanders and
pets away when a load is raised.
Do not work under a raised load.
Lever Chain Hoist
For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING! Verify that the load weighs
less than the capacity of your Hoist model,
as listed in the Specifications chart.
Attachment point must be rated to support
the combined weight of hoist and load.
96482 – 3/4 Ton and
66106 – 1-1/2 Ton
Operating Instructions
1. Attach the Hoist to the connection
point by sliding the Top Hook onto it.
The Top Hook must fit the connection point
securely, with the safety latch fully engaged,
as shown in Figure A, on the right.
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Top Hook
safety latch
Brake Knob
Figure A: Incorrect and
Correct Hook Attachment
2. Turn the Selector Lever to the neutral position
(see Figure G) to disengage the ratchet.
ONLY IF UNLOADED, turn Brake Knob
counterclockwise to release load holding brake
Selector
Lever
Lever
Handle
Brake
Knob
D
U
Selector
Lever
1
/
2
1
TON
Figure G: 66106/96482 Selector Lever
and Brake Knob “N” / Neutral Position
safety latch
3. Turn the Brake Knob counterclockwise until
it stops to release the load holding brake.
Load Hook
WARNING! DO NOT TURN THE
BRAKE KNOB COUNTERCLOCKWISE
UNLESS NO LOAD IS SUPPORTED.
Figure F: 66106/96482 Controls
4. Pull the load chain by hand and
attach the Load Hook to the load.
The safety latch should be fully engaged.
Do not suspend a load on just the
end of the hook, see Figure A.
Page 6
For technical questions, please call 1-800-444-3353.
Lever Chain Hoist
Download from Www.Somanuals.com. All Manuals Search And Download.
5. WARNING! Turn the Brake Knob
clockwise until it stops before
lifting or lowering a load.
9. To lower the load, turn the Selector Lever to
the down position (see Figure I) and ratchet
until the load is resting fully on the work area.
WARNING! DO NOT LOWER BY TURNING
BRAKE KNOB OR LOAD WILL FALL.
6. Move the Selector Lever to the up position
(see Figure H) and ratchet the
Lever Handle to lift the load.
Turn Brake Knob clockwise to engage brake
D
U
N
1
/
2
1
TON
D
N
Figure I: 66106/96482 Selector Lever
“D” / Down Position
1
/
2
1
TON
Figure H: 66106/96482 Selector Lever
and Brake Knob “U” / Up Position
10. Disconnect Hoist, clean, then store the
tool indoors out of children’s reach.
Note: If there is slack in the load chain, you may
need to pull on the load chain slightly to get the
ratchet to engage until the slack is taken up.
User-Maintenance Instructions
(for all lever chain hoists)
7. Lift load slightly and stop momentarily to make
sure the load brake works before proceeding.
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
WARNING! Keep bystanders and
pets away when a load is raised.
Do not work under a raised load.
8. If the load is to be moved, lower it close to the
ground prior to attempting to relocate the load.
Do not touch the Selector Lever until
the load is ready to be lowered.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise occurs, have the
problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for loose screws,
misalignment or binding of moving parts,
cracked or broken parts and any other
condition that may affect its safe operation.
2. AFTER USE, clean surfaces of
the tool with clean cloth.
3. WEEKLY, lubricate all chain links. Apply new
lubricant on top of the old layer of lubricant.
4. PERIODICALLY, lubricate the moving
parts of the Hoist with white lithium
grease, but not the braking system.
Lever Chain Hoist
For technical questions, please call 1-800-444-3353.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT
BY THE BUYER. THE BUYER ASSUMES ALL
RISK AND LIABILITY ARISING OUT OF HIS OR
HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note:
If product has no serial number,
record month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
Parts Lists and Diagrams
67144 Parts List
IMPORTANT: When ordering parts, specify which SKU the parts are for.
Part
1
2
3
4
5
6
7
8
Description
Qty.
1
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
Part
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Description
Qty.
1
1
1
2
1
1
1
1
1
1
1
1
5
5
1
1
Label
Bottom Hook
Gear Case
Top Pin
Side Plate
Guide Roller
Lifting Shaft
Bushing
Stay Bolt A
Top Hook
Stay Bolt B
Pawl Spring
Pawl
Load Chain
Brake Seat
Brake Disc
Brake Spring
Ratchet Wheel
Female Thread Disk
Brake Cover
Handle
Flat Washer
Slot Knob
Split Pin
Spring Washer B
Hex Nut B
Suspension Pin
Locking Nut
Selector Lever
9
10
11
12
13
14
15
16
17
18
Circlip
Split Cam
Spring Washer A
Hex Nut A
Chain Stripper
Chain End Ring
1
1
1
Page 8
For technical questions, please call 1-800-444-3353.
Lever Chain Hoist
Download from Www.Somanuals.com. All Manuals Search And Download.
Lever Chain Hoist
For technical questions, please call 1-800-444-3353.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
66106 and 96482 Parts List
IMPORTANT: When ordering parts, specify which SKU the parts are for.
Part
1
2
3
4
5
6
7
8
Description
Qty
1
2
2
1
1
1
1
2
1
1
1
1
1
1
1
1
Part
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Description
Qty
1
1
1
2
1
1
1
1
2
1
2
2
2
2
1
1
Brake Knob
Screw
Gear Disk B
Driving Shaft
Splined Gear
Guide Roller
Chain Stripper
Chain
Load Hook
Chain Pin
Snap Ring
Brake Seat
Pawl Spring
Pawl
Spring Washer
Lever Handle
Selector Wheel
Handle Case
Thread Disk
Brake Disc
Ratchet Disk
Brake Spring
Side Plate A
Bearing Ring
Sprocket
Top Hook
Top Pin
Side Plate B
Snap Ring
Gear Disk A
End Plate
9
10
11
12
13
14
15
16
17
18
19
20
21
Washer
Locknut
Changeover Pawl
Spring Pin
Changeover Spring
Selector Lever
Slotted Nut
Split Pin
1
1
1
6
1
1
1
1
Hex Nut
Spring Washer
6
Page 10
For technical questions, please call 1-800-444-3353.
Lever Chain Hoist
Download from Www.Somanuals.com. All Manuals Search And Download.
Lever Chain Hoist
For technical questions, please call 1-800-444-3353.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
To take advantage of this warranty, the
product or part must be returned to us with
transportation charges prepaid. Proof of
Limited 90 Day Warranty
purchase date and an explanation of the
complaint must accompany the merchandise. If
our inspection verifies the defect, we will either
repair or replace the product at our election or
we may elect to refund the purchase price if we
cannot readily and quickly provide you with a
replacement. We will return repaired products
at our expense, but if we determine there is no
defect, or that the defect resulted from causes
not within the scope of our warranty, then you
must bear the cost of returning the product.
Harbor Freight Tools Co. makes every effort
to assure that its products meet high quality
and durability standards, and warrants to the
original purchaser that this product is free
from defects in materials and workmanship
for the period of 90 days from the date of
purchase. This warranty does not apply to
damage due directly or indirectly, to misuse,
abuse, negligence or accidents, repairs or
alterations outside our facilities, criminal
activity, improper installation, normal wear and
tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons
or property, or for incidental, contingent,
special or consequential damages arising from
the use of our product. Some states do not
allow the exclusion or limitation of incidental
or consequential damages, so the above
limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009
Camarillo, CA 93011 • (800) 444-3353
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Download from Www.Somanuals.com. All Manuals Search And Download.
|