®
HALO
L942
Flex Joiner
L943
Straight/L Connector
To connect two track sections at any angle up
to 90,° in either plane or wall to ceiling or
pitched ceiling applications.
To connect two track sections end-to-end or at
a 90° angle. May be used as feed point.
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
L945L
Left T Connector
L945R
Right T Connector
“T” connector for joining three trac sections
with left hand polarity. May be used as feed
point.
“T” connector for joining three trac sections
with right hand polarity. May be used as feed
point.
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
L946
X Connector
L947
Conduit Connector
To connect four track section into a cross
configuration. May be used for feed point.
A live end connector for use with surface
conduit. Designed to accept standard 1/2”
conduit fitting (not included). May be used for
feed point.
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
L951
Wire Way Cover for
Pendant Assembly Kit
L949
Mini Joiner
To join two straight track sections end-to-end.
Not a feed point.
For track to be wired through stem (one for
each live end used). Shown with end feed and
pendant stem kit–order separately
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
L983
T-Bar Attachment Clip
L989
Conduit Continuation Kit
Allows track to be attached to inverted tee
ceiling. Order as follows: 2 kits for 2’ Trac; 2
kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for
12’ Trac.
Includes one left and one right feed. To
continue
a run around obstructions with 1/2” trade size
surface conduit.
L986
T-Bar Attachment Clip
Finish: White (P), Black (MB)
For mounting track on suspended ceilings with
mini-grid (9/16" wide) system.
L992
Pendant Kit Assembly
L929
Floating Canopy and
Connector
To suspend track from ceiling. Order as
follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3
kits for 8’ Trac; and 4 kits for 12’ Trac. Includes
one 18” threaded steel stem, canopy and
mounting hardware.
Can be connected anywhere along length of
Trac. Comes with canopy cover, connector,
dead-end and mounting hardware.
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
L48
48” Steel Stem
For additional length of stem for L992. Can be
field cut and threaded.
L994
45° Pendant Adapter
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.
DE641 Dead End
Replacement Dead Ends for Two Circuit Track
(6 included)
Finish: White (P), Black (MB)
Finish: White (P), Black (MB)
COOPER LIGHTING
313
Download from Www.Somanuals.com. All Manuals Search And Download.
|